®
ViewSonic
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
PJD5112
DLP Projector
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
IMPORTANT: Please read this User Guide to obtain important information on install-
ing and using your product in a safe manner, as well as registering your product for
future service. Warranty information contained in this User Guide will describe your
limited coverage from ViewSonic Corporation, which is also found on our web site
selection box in the upper right corner of our website.
- 사용자 안내서
- คู่มือการใช้งาน
- Podręcznik użytkownika
- Kullanιcι kιlavuzu
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
Model No. : VS12618
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean with a soft, dry cloth.
Do not block any ventilation openings. Install the unit in accordance with the
manufacturer’s instructions.
8.
9.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade and the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the unit. Be sure that the
power outlet is located near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the unit. When a cart is used, use caution when
moving the cart/unit combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit
has been damaged in any way, such as: if the power-supply cord or plug is damaged,
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or
moisture, or if the unit does not operate normally or has been dropped.
EN-ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS Directives
as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic
parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up
to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
EN-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright© ViewSonic® Corporation, 2010. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are
trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or
the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available,
ROM also provides an opportunity for you to print the registration form, which you may mail or fax to
ViewSonic.
For Your Records
Product Name:
PJD5112
ViewSonic DLP Projector
VS12618
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJD5112_UG_ENG Rev. 1C 04-19-10
_______________________________
_______________________________
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.
EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this projector.
Please confirm your AC plug type with the graphics below and ensure that the proper
AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,
please contact your sales dealer. This projector is equipped with a grounding type AC
line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose
of this grounding type plug. We highly recommend using a video source device also
equipped with a grounding type AC line plug to prevent signal interference due to
voltage fluctuations.
Ground
EN-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction ........................................................................................................5
Projector Features .......................................................................................................5
Package Contents .......................................................................................................6
Projector Overview ......................................................................................................7
Using the Product ........................................................................................9
Control Panel ..............................................................................................................9
Connection Ports .......................................................................................................10
Remote Control .........................................................................................................11
Replacing the Battery ................................................................................................12
Remote Control Operation ........................................................................................13
Installation ........................................................................................................14
Connecting the Projector ...........................................................................................14
Powering On/Off the Projector ..................................................................................15
Adjusting the Projector ..............................................................................................16
Cleaning the Lens .....................................................................................................24
Cleaning the Projector Housing ................................................................................24
Replacing the Lamp ..................................................................................................25
Specifications ...............................................................................................27
LED Indicator Messages ...........................................................................................28
Compatibility Modes ..................................................................................................29
Troubleshooting ........................................................................................................31
RS-232 Command and Configuration .......................................................................32
IR Control Code ........................................................................................................34
EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
®
„
„
„
Single chip 1.397cm / 0.55" Texas Instruments DLP technology
SVGA (800 x 600 pixels)
Auto image re-sizing (Auto-Sync.) to 800 x 600 full screen with scaling
compression compatibility for VGA, SVGA, XGA and SXGA
®
„
„
„
„
„
„
Compatibility with Macintosh computers
Compatibility with NTSC, PAL, SECAM and HDTV
D-Sub 15-pin terminal for analog video connectivity
User-friendly, multi-language on-screen display
Advanced electronic keystone correction
RS-232 connector for serial control
„
„
The information in this manual is subject to change without notices.
The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
EN-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
When you unpack the projector, make sure you have all these components:
Projector with Lens Cap
AC Power Cord
Remote Control (IR)
ViewSonic CD Wizard
Quick Start Guide
VGA Cable (D-SUB to D-SUB)
Optional accessories
RS232 cable
P/N: J2552-0208-00
RGB to component adapter
P/N: J2552-0212-00
„
„
Contact you dealer immediately if any items are missing, appear damaged, or if
the unit does not work
Save the original shipping carton and Packing material; they will come-in handy
if you ever to ship your unit. for maximum protection, repack your unit as it was
originally packed at the factory.
.
EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector Overview
Front View
7
11
10
9
8
1
2
3
4
5
6
Lens cap
1
2
3
4
5
6
7
8
9
Speaker
Elevator button
Lens cap strap
Projection lens
Focus ring
Zoom ring
Control panel
Lamp cover
10
11
Front IR remote control sensor
Ventilation holes (intake)
EN-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
2
3
4
5
1
6
Connection ports
AC power socket
Kensington lock
Rear IR remote control sensor
Ventilation holes (exhaust)
Security bar
1
2
3
4
5
6
Bottom View
1
2
70.0mm
90.0mm
Ceiling mount (M46)
Tilt-adjustment feet
1
2
„
„
This projector can be used with a ceiling mount for support. The ceiling mount is
not included in the package.
Contact your dealer for information to mount the projector on a ceiling.
EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Product
Control Panel
LED
9
1
2
3
4
5
6
8
7
4
Power (Power LED indicator)
Refer to “LED Indicator Messages”.
TEMP (Temperature LED indicator)
Refer to “LED Indicator Messages”.
LAMP (Lamp LED indicator)
1
2
3
Refer to “LED Indicator Messages”.
Button Function
/
Keystone
4
5
6
7
8
9
Manually correct distorted images resulting from an angled projection.
Four directional buttons
Use four directional buttons to select items or make adjustments to your selection.
ENTER
Enter to sub-menu and confirm the menu selection.
SOURCE
Manually select an input source.
MENU/EXIT
Display or exit the on-screen display menus.
Power
Turn the projector on or off.
EN-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Ports
1
1
2
3
4
5
6
7
8 9 10
USB
1
2
3
4
5
6
This connector is for firmware update and mouse function support.
VIDEO
Connect composite video output from video equipment to this jack.
S-VIDEO
Connect S-Video output from video equipment to this jack.
MONITOR OUT
Connect to a computer display, etc.
COMPUTER IN 1
Connect image input signal (analog RGB or component) to this jack.
RS-232
When operating the projector via a computer, connect this to the controlling computer's
RS-232C port.
COMPUTER IN 2
Connect image input signal (analog RGB or component) to this jack
7
8
12V OUT
12V DC out
AUDIO IN
9
Connect an audio output from video equipment to this jack.
AUDIO OUT
10
Connect to a speaker or other audio input equipment.
EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
1
Turn the projector on or off.
Four directional buttons
2
Use four directional buttons to
select items or make adjustments
to your selection.
MENU
3
Display or exit the on-screen display
menus.
Enter
4
Confirmed selections.
Exit
5
Exit OSD Menu.
Keystone+ / -
6
Adjust image distortion caused by
tilting the projector.
Magnify
Freeze
12
13
7
Press “Freeze” to pause the screen image.
Press again to cancel the freeze function.
Zoom in and out the images.
Source
Manually select an input source.
Mute
8
Cut off the sound temporarily. Press again
to cancel the Mute function.
Auto
Blank
14
15
9
Resynchronize the projector to the
input signal from a computer. This
function is available for computer
mode only.
Cut off the screen temporarily. Press
again to cancel the Blank Screen
function.
Mouse
Volume + / -
Adjust the volume level.
10
Switch between OSD control and
Mouse control (Apply to
Navigation buttons, Enter/Mouse
Left Click, and Exit/Mouse Right
Click buttons).
ViewM
11
Switch in between high brightness
performance or Accuracy color
performance.
EN-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Battery
For the first time use:
Remove the transparent insulation tape by pulling
it before use.
For battery change:
1.
Push the catch to the left and remove the battery
holder.
2.
3.
Remove the old Lithium coin cell and install new one
(CR2025). Ensure that the side with the mark “+” is up.
Push the battery holder back into the remote control
until you feel a click.
Caution
„
„
„
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
„
„
„
Keep the battery out of the reach of children.
Do not recharge the battery or expose the battery to fire or water.
Do not dispose the used battery along with household waste. Dispose u
batteries according to local regulations.
„
„
„
Danger of explosion may happen if batteries are incorrectly replaced.
Replace only with the same type recommended by the manufacturer.
Battery should not be in or near to fire or water, keep batteries in a dark
and dry place.
If suspect battery leakage, wipe out the leakage and then replace a new bat
the leakage adheres to your body or clothes, rinse well with water immediat
EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Operation
Point the remote control at the infrared remote sensor and press a button.
„
Operating the projector from
the front
„
Operating the projector from
the rear
„
The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.
Operate the remote control from a position where the remote sensor is visible.
Do not drop the remote control or jolt it.
Keep the remote control out of locations with excessively high temperature or
humidity.
„
„
„
„
„
Do not get water on the remote control or place wet objects on it.
Do not disassemble the remote control.
EN-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting the Projector
USB Cable
VGA (D-Sub) to HDTV (RCA) Cable
Composite Video Cable
S-Video Cable
1
5
6
7
VGA Cable (D-Sub to D-Sub)
2
RS-232 Cable
3
Audio Cable
4
Laptop type
Desktop type
2
2
2
3
1
4
5
5
7
6
4
4
WPG-350
„
„
„
When connecting cable, power cords of both projector and external equipment
should be disconnected from AC outlet.
The figure above is a sample connection. This does not mean that all of these
devices can or must be connected simultaneously.
The cables that come with the projector may differ from the above illustration.
The included cables are based on actual shipment delivery.
EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering On/Off the Projector
Powering On the Projector:
1.
2.
3.
Remove the projector lens cap.
Complete the AC power cord and peripheral signal cable(s) connections.
Press
button to turn on the projector.
The projector takes a minute or so to warm up.
Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
4.
„
If you are connecting multiple sources to the projector simultaneously, press
the SOURCE button on the control panel or the Source button on the remote
control.
Warning
„ Remove the lens cap first before powering on.
„ Never look into the lens when the lamp is on. This can damage your eyes.
„ This focal point concentrates high temperature. Do not place any object near
it to avoid possible fire hazard.
Powering Off the Projector:
1.
Press
off? Press Power again" appear on the screen.
Press button again to confirm.
button to turn off the projector lamp. You will see a message "Power
2.
„
„
„
The cooling fans continue to operate for cooling cycle.
When the Lamp LED begins flashing, the projector has entered stand-by mode.
If you want to turn the projector back on, you must wait until the projector has
completed the cooling cycle and has entered stand-by mode. Once in stand-
by mode, simply press
button to restart the projector.
3.
4.
Disconnect the AC power cord from the electrical outlet and the projector.
Do not turn on the projector right after power off.
EN-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projector
Adjusting the Projector Height
Tilt-adjustment foot
Elevator foot
Elevator button
The projector is equipped with an elevator foot to adjust the image height.
To raise or lower the image:
1.
To raise or lower the image, press the elevator button and raise or lower the front
of the projector. Release the button to lock the adjustment.
To level the image on the screen, turn the tilt-adjustment foot to fine-tune the
height.
2.
„
To avoid damaging the projector, make sure that the elevator foot and tilt-
adjustment foot are fully retracted before placing the projector in its carrying
case.
Adjusting the Projector Zoom and Focus
Zoom ring
Focus ring
1.
2.
Focus the image by rotating the focus ring. A still image is recommended for focusing.
Adjust the image by sliding the zoom ring.
EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
5.08m / 200"
3.05m / 120"
2.54m / 100"
1.52m / 60"
1.02m / 40"
Wide: 1.3m / 51.2” Tele: 1.6m / 63.0”
Wide: 2.0m / 78.7” Tele: 2.4m / 94.5”
Wide: 3.3m / 130.0” Tele: 4.0m / 157.4”
Wide: 3.9m / 153.5” Tele: 4.8m / 189.0
Wide: 6.6m / 259.8” Tele: 8.0m / 315.0”
4 : 3 Screen
Wide
Tele
Projection distance
inch
Screen size
Diagonal
Projection distance
m
inch
51
m
1.02m / 40"
1.27m / 50"
1.52m / 60"
1.78m / 70"
2.03m / 80"
2.29m / 90"
2.54m / 100"
3.05m / 120"
3.81m / 150"
5.08m / 200"
6.35m / 250"
7.62m / 300"
1.30
1.60
1.96
2.29
2.62
3.00
3.28
3.91
4.95
6.60
8.28
9.93
1.57
2.00
2.39
2.79
3.18
3.58
3.99
4.80
5.99
8.00
62
79
63
77
94
90
110
125
141
157
189
236
315
103
118
129
154
195
260
326
391
10.01
-
394
-
„
Position the projector in a horizontal position; other positions can cause heat
build-up and damage to the projector.
„
„
Keep a space of 30 cm or more between the sides of the projector.
Do not use the projector in a smoky environment. Smoke residue may build-
up on critical parts and damage the projector or its performance
.
„
Consult with your dealer for special installation such as suspending from a
ceiling.
EN-17
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Adjustable range and default setting vary depending on signal type.
2 This function is only available when the projector is installed an optional filter cover.
EN-19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to operate
1.
2.
3.
Press the MENU button to open the OSD menu.
When OSD is displayed, use to select any feature in the main menu.
After selecting the desired main menu item, press to enter sub-menu for
feature setting
Use to select the desired item and adjust the settings with
Press the MENU button, the screen will return to the main menu.
S
/
T
X
.
4.
5.
6.
S
/
T
W
/
X.
To exit OSD, Press the MENU button again. The OSD menu will close and the
projector will automatically save the new settings.
Picture (Computer / Video Mode)
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.
User Color
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select
each color, you can independently adjust its range and saturation according to your
preference.
Keystone
Manually correct distorted images resulting from an angled projection.
Aspect Ratio
Select how the picture fits on the screen:
„
„
4:3
:
The input source will be scaled to fit the projection screen.
16:9 : The input source will be scaled to fit the width of the screen.
Image
There are many factory presets optimized for various types of images.
„
„
„
„
„
„
„
„
PC
:
:
:
:
For computer or notebook.
For home theater.
For PC standard color.
Memorize user’s settings.
Movie
sRGB
User
White Board : For white projection screen type.
Black Board : For black projection screen type.
Green Board: For green projection screen type.
Daylight Mode: For a daylight environment.
White Intensity
Increase the brightness of white areas.
EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.
3D Sync
„
„
„
Off: Disable 3D function
3D-Vision: For NVIDIA 3D Vision application
DLP-LINK: For TI 3D DLP-LINK application
3D Sync Invert (for TI 3D DLP-LINK only)
„
„
On: Invert left and right frame contents.
Off: Default frame contents.
Computer Image (Computer Mode)
Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.
Video Image (Video Mode)
Saturation
Adjust a video image from black and white to fully saturated color.
Sharpness
Sharpen or soften the image.
Tint
Shift colors toward red or green.
Sound (Computer / Video Mode)
Volume
Adjust the volume level.
Mute
Cut off the sound temporarily.
Setting (Computer / Video Mode)
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
EN-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Signal Type
Specify the source to the COMPUTER IN 1/COMPUTER IN 2 terminal that you wish to
project.
„
Auto : Automatically detect the input signal type from COMPUTER IN 1 and
COMPUTER IN 2 terminals.
„
„
RGB : For VGA signal
YCbCr/YPbPr:For component signal
Lamp Hours
Display the lamp’s elapsed operating time (in hours).
Lamp Hours Reset
Reset the lamp Hour to 0 hours.
Filter Mode
Use this function to activate filter mode after the projector is installed an optional filter
cover.
Filter Hours
Display the filter’s elapsed operating time (in hours).
„
When Filter Mode is turned on, the Filter Hours also turns on automatically.
Filter Hours Reset
Reset the filter Hour to 0 hours.
Power Saving
If no operation is performed for a specific period of time, projector will automatically
turn off.
Auto Source
Automatically scan through all the input source.
ECO Mode
Use this function to dim the projector lamp light output which will lower power
consumption and increase lamp life.
„
This function will be unavailable when the DCR function is on.
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve
proper high altitude cooling of the projector.
OSD Timeout
Duration of OSD menu display countly starts (at idle state by second).
Option (Computer / Video Mode)
Blank Screen
Blank the screen temporarily, and select the screen color when this function is active.
Password
EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Set or change the password. When the password function is added, image projection
will require to input the preset password when turning on the projector.
Screen Capture
Capture the current projection screen as a start-up screen.
Start-up Screen
Select start-up screen when the projector is powered on or when no signal is input.
"User" is the screen that you captured.
Zoom
Zoom in and out the images.
DCR (Dynamic Contrast Ratio)
Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable
DCR will resume to normal contrast performance. DCR will impact lamp life and
system noise performance.
Closed Caption
Enable or Disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2 or OFF.
Brilliant Color™
Produce an expanded on-screen color spectrum that delivers enhanced color
saturation for bright, true-to-life images. Suggesting to turn Off for most video sources
and On for most computer sources.
Green Mode
Enable this function when power consumption is under 1W.
Language (Computer / Video Mode)
Select the language used by the on-screen menu.
Factory Default (Computer / Video Mode)
Restore settings to factory default .
System Info (Computer / Video Mode)
Source
Display the current input source.
Resolution
Display current input source resolution.
H. Frequency
Display current image horizontal frequency.
V. Frequency
Display current image vertical frequency.
EN-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt
or spots will project on the screen and diminish image quality. If any other parts need
replacing, contact your dealer or qualified service personnel. When cleaning any part
of the projector, always switch off and unplug the projector first.
Warning
Never open any of the covers on the projector. Dangerous electrical voltages
inside the projector can cause severe injury. Do not attempt to service this
product yourself. Refer all servicing to qualified service personnel.
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.
Cleaning the Projector Housing
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.
„
Turn off the projector and remove the AC power cord from the power outlet
before beginning maintenance work.
„
„
Make sure the lens is cool before cleaning.
Do not use detergents or chemicals other than those noted above. Do not use
benzene or thinners.
„
„
Do not use chemical sprays.
Use a soft cloth or lens paper only.
EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp gradually
decreases and the lamp becomes more susceptible to breakage. We recommend
replacing the lamp if a warning message is displayed. Do not attempt to replace the
lamp yourself. Contact the qualified service personnel for replacement.
„
The lamp is extremely hot right after turning off the projector. If you touch the
lamp, you may scald your finger. When you replace the lamp, wait for at least
45 minutes for the lamp to cool down.
„
„
Do not touch the lamp glass at any time. The lamp may explode due to
improper handling, including the touching of the lamp glass.
Lamp lifetime may differ from lamp to lamp and according to the environment
of use. There is no guarantee of the same lifetime for each lamp. Some lamps
may fail or terminate their lifetime in a shorter period of time than other similar
lamps.
„
A lamp may explode as a result of vibration, shock or degradation as a result of
hours of use as its lifetime draws to an end. Risk of explosion may differ
according to the environment or conditions in which the projector and lamp are
being used.
„
„
Wear protective gloves and eyeglasses when fixing or detaching the lamp.
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least
for 5 minutes to turn off the projector after powering on.
Do not operate the lamp in proximity to paper, cloth, or other combustible
material nor cover it with such materials.
Do not operate the lamp in an atmosphere containing an inflammable
substance, such as thinner.
Thoroughly ventilate the area or the room when operating the lamp in an
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,
nausea, dizziness, and other symptoms.
„
„
„
„
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury
inside the lamp will be exposed. Leave the area immediately if the lamp
shatters while being operated and ventilate the area for at least 30 minutes in
order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to
user’s health.
EN-25
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
3.
4.
5.
Turn off the projector.
If the projector is installed in a ceiling mount, remove it
Unplug the power cord.
Loosen the screw in the side of the lamp cover and remove the cover.
Remove the screws from the lamp module, raise the handle, and lift out the
module.
6.
7.
8.
Insert the new lamp module into the projector and tighten the screws.
Replace the lamp cover and tighten the screw.
Turn on the projector. If the lamp does not turn on after the warm-up period, try
reinstalling the lamp.
9.
Reset the lamp hour. Refer to the “Setting” menu.
„
„
Dispose the used lamp according to local regulations.
Ensure that screws are tightened properly. Screws not tightened fully may
result in injury or accidents.
„
Since the lamp is made of glass, do not drop the unit and do not scratch the
glass.
„
„
Do not reuse the old lamp. This could cause the lamp to explode.
Be sure to turn off the projector and unplug the AC power cord before
replacing the lamp.
„
Do not use the projector with the lamp cover removed.
EN-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Display system
Resolution
Zoom
Single 1.397cm / 0.55" DLP panel
SVGA (800 × 600)
1.2X
F/No.
2.54 - 2.78
Focal length
Screen size
Lamp
18.36 - 22.02mm
101.6cm ~ 762cm / 40” – 300”
180W
Input terminal
D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input
(3.5 mm stereo mini jack) x 1
D-Sub 15 pin x 1, Audio signal output (3.5 mm stereo mini jack) x
1, 12-Vdc trigger output x 1
Output terminal
Control terminal
Speaker
RS-232 x 1, USB x 1
2 watt x 1
Video compatibility
NTSC, NTSC 4.43
PAL, PAL-N, PAL M
SECAM, HDTV (480p, 576p, 720p, 1080i/p), Composite video
Scanning frequency
Horizontal frequency
Vertical frequency
Environment
31 - 80 KHz
50 - 120 Hz
Operating:
Temperature: 0°C to 40°C
Humidity: 30%-85%
Storage:
Temperature: -20°C to 60°C
Humidity: 30%-85%
AC 100-240 V, 50 - 60 Hz, 2.5A
240 W
Power requirement
Power consumption
Dimension (W x D x H)
Weight
279.5mm x 218mm x 105mm / 11.0" x 8.6" x 4.1"
2.7 kg (6lb)
Note: Design and Specifications are subject to change without prior notice.
EN-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
LED Indicator Messages
LED Type
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Color
Blue
Off
Status
Meaning
Solid
The projector is in standby
mode.
Off
Off
Off
Blue
Off
Solid
Off
Powering up
Off
Off
Blue
Off
Solid
Off
Normal operation
Power-down
Off
Off
Blue
Off
Flash
Off
Off
Off
Blue
Red
Red
Blue
Off
Solid (Full brightness)
The projector system has some
problems with its fans, so the
projector cannot start up.
Solid
Flash
Solid (Full brightness)
The lamp is in good condition
and is projecting at maximum
brightness.
Off
Off
Off
Blue
Off
Solid (Full brightness)
The lamp has reached its end
of life and must be changed
soon. The lamp will continue to
operate until it fails . Change
the lamp. If the lamp is off, then
the ballast will become
Solid
Solid
Off
malfunction.
Power LED
Blue
Flash (Full
brightness)
The projector is shutting and
the fan motor is cooling the
lamp for shutdown. Do not
unplug the power cord or turn
the power off before the Lamp
LED changes to flashing. The
fan motor will turn off when the
lamp has cooled.
Lamp LED
Temp LED
Red
Red
Solid
Solid
Power LED
Lamp LED
Temp LED
Power LED
Lamp LED
Temp LED
Blue
Red
Red
Off
Solid (Full brightness)
Temperature is too high. The
lamp will turn off. The fan motor
is cooling the lamp.
Flash
Off
Off
The lamp ignition failed. If
temperature is too high, the
fans will cool the lamp.
Red
Red
Solid
Solid
EN-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility Modes
Computer:
Compatibility
Resolution
H-Sync [KHz]
24.6
31.5
37.9
37.5
43.3
61.9
31.5
37.9
31.0
35.2
37.9
48.1
46.9
53.7
76.3
76.3
48.4
56.5
60.0
68.7
97.6
97.6
67.5
60.0
85.9
64.0
80.0
64.7
75.0
64.0
80.0
64.7
75.0
V-Sync [Hz]
50.0
59.9
72.8
75.0
85.0
119.5
70.0
85.0
50.0
56.0
60.3
72.0
75.0
85.1
120.0
120.0
60.0
70.1
75.0
85.0
120.0
120.0
75.0
60.0
85.0
60.0
75.0
60.0
75.0
60.0
75.0
60.0
60.0
VGA
640 x 480
640 x 480 @ 120Hz
720 x 400
SVGA
800 x 600
800 x 600 @ 120Hz
1024 x 768
XGA
1024 x 768 @ 120Hz
1152 x 864
1280 x 960
SXGA
1280 x 1024
1280 x 960
1280 x 1024
14460 x 1050
1600 x 1200
EN-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Video:
Signal
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
1080i
1080i
1080p
1080p
720p
720p
576p
576i
33.8
28.1
67.5
56.3
45.0
37.5
31.3
15.8
31.5
15.8
60.0
50.0
60.0
50.0
60.0
50.0
50.0
50.0
60.0
60.0
480p
480i
EN-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector for
repairs. If the problem persists, contact your local reseller or service center. Please
refer to "LED Indicator Messages" as well.
Start-up problems
If no lights turn on:
„
Be sure that the power cord is securely connected to the projector and the other end
is plugged into an outlet with power.
„
„
Press the power button again.
Unplug the power cord and wait for a short while, then plug it in and press the power
button again.
Image problems
If the searching source is displayed:
„
Press the SOURCE button on the control panel or the Source button on the remote
control one or more times to select another active input source.
Be sure the external source is turned on and connected.
„
„
For a computer connection, ensure your notebook computer’s external video port is
turned on. Refer to the computer manual.
If the image is out of focus:
„
„
Be sure the lens cover is removed.
While displaying the on-screen menu, adjust the focus ring. (The image size should
not change; if it does, you are adjusting the zoom, not the focus.)
Check the projection lens to see if it needs cleaning.
„
If the image is flickering or unstable for a computer connection:
„
„
Press the Auto button on the remote control.
Press the MENU button, go to Computer Image and adjust Frequency or
Tracking.
Remote control problems
If the remote control does not operate:
„
Be sure nothing is blocking the remote control receiver on the front of the
projector. Use the remote control within the effective range.
Aim the remote control at the screen or at the front or back of the projector.
Move the remote control so it is more directly in front of or behind the projector and
not as far to the side.
„
„
EN-31
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Command and Configuration
Baud Rate:19200 Parity Bit:none
Data Bit:8 Stop Bit:1 Assign Port:COM1
Operation
type
Header
Command
Response
CRC
Name
ON
OFF
BE, EF, 10, 05, 00,
BE, EF, 03, 06, 00,
C6, FF,
11, 11, 01, 00, 01, 00
06
06
Power
DC, DB, 69, 00, 00, 00, 00, 00
Computer
(Analog RGB) BE, EF, 03, 19, 00,
19, 29, 01, 47, 02, CC, CC, 00
06
06
06
06
YCbCr
BE, EF, 03, 19, 00,
BE, EF, 03, 19, 00,
BE, EF, 03, 19, 00,
89, E8, 01, 47, 02, CC, CC, 00
E8, 69, 01, 47, 02, CC, CC, 00
78, A8, 01, 47, 02, CC, CC, 00
S-Video
Source
Composite
Video
HDTV (Y-Pb- BE, EF, 03, 19, 00,
Pr)
DA, 2B, 01, 47, 02, CC, CC, 00
06
Menu
Up
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 02, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
BE, EF, 03, 06, 00,
E9, D3,
6D, D2,
0B, D2,
DA, D3,
38, D2,
EF, DB,
3E, DA,
89, DB,
58, DA,
57, D0,
86, D1,
DF, DF,
3D, DE,
10, DB,
23, DB,
F2, DA,
0D, DA,
6B, DA,
BA, DB,
D5, D9,
04, D8,
30, 00, 00, 00, 00, 00
34, 00, 00, 00, 00, 00
32, 00, 00, 00, 00, 00
33, 00, 00, 00, 00, 00
31, 00, 00, 00, 00, 00
6A, 00, 00, 00, 00, 00
6B, 00, 00, 00, 00, 00
6C, 00, 00, 00, 00, 00
6D, 00, 00, 00, 00, 00
2E, 00, 00, 00, 00, 00
2F, 00, 00, 00, 00, 00
66, 00, 00, 00, 00, 00
64, 00, 00, 00, 00, 00
65, 00, 00, 00, 00, 00
66, 00, 00, 00, 00, 00
67, 00, 00, 00, 00, 00
68, 00, 00, 00, 00, 00
6E, 00, 00, 00, 00, 00
06
06
06
06
06
06
06
06
06
06
06
06
06
06
06
06
06
06
OSD
ECO
Down
Left
Right
On
Off
Auto
Source
On
Off
Source
Auto-Sync
Blank Screen(Video)
Keystone
Keystone
Up
Down
Image
Aspect Ratio
Factory Reset
Lamp Hour
6F, 00, 00, 00, 00, 00 Lamp Hour
70, 00, 00, 00, 00, 00 Version
Firmware Version
System Status
71, 00, 00, 00, 00, 00 03:Projector
ON
(Normal
Mode)
EN-32
Download from Www.Somanuals.com. All Manuals Search And Download.
D-Sub 9 pin
Wire List
COLOR
Black
1
2
3
4
5
6
7
8
9
1 CD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
C1
C2
1
1
2
Brown
Red
2
3
3
4
Orange
Yellow
Green
Blue
4
5
5
6
6
7
7
8
9
Purple
White
DW
8
9
SHELL
SHELL
EN-33
Download from Www.Somanuals.com. All Manuals Search And Download.
IR Control Code
Key
Power
Format Byte1 Byte2 Byte3 Byte4
NEC
NEC
NEC
NEC
NEC
NEC
NEC
NEC
NEC
NEC
NEC
NEC
83
83
83
83
83
83
83
83
83
83
83
83
F4
F4
F4
F4
F4
F4
F4
F4
F4
F4
F4
F4
13
13
13
13
13
13
13
13
13
13
13
13
87
02
82
85
83
81
84
64
6B
63
80
8c
Source
Up
Down
Left
Right
MENU
Auto
Mouse
ViewMatch
Freeze
Enter /
Mouse Left
Exit /
NEC
83
F4
13
8d
Mouse
Right
KeyS+
KeyS-
NEC
NEC
NEC
83
83
83
F4
F4
F4
13
13
13
86
8a
68
Digital
Zoom+
Digital
Zoom-
NEC
83
F4
13
6a
Volume+
Volume-
Mute
NEC
NEC
NEC
NEC
83
83
83
83
F4
F4
F4
F4
13
13
13
13
88
89
8b
8f
Blank
EN-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T=Telephone
Country/Region
Web Site
E-mail
F=Fax
AUS=1800 880 818
NZ=0800 008 822
Australia/New Zealand
Canada
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Europe
T= 852 3102 2900
Hong Kong
India
T= 1800 11 9999
Ireland (Eire)
Korea
T= 080 333 2131
T= 0800-4441185
T=1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America (Argentina)
Latin America (Chile)
Latin America (Columbia)
Latin America (Mexico)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Latin America (Peru)
Macau
ap.viewsonic.com/me/
T= 0800-54565
T= 853 2870 0303
Contact your reseller
Middle East
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico & Virgin Islands
Singapore/Malaysia/Thailand
South Africa
ap.viewsonic.com/za/
T= 65 6461 6044
Contact your reseller
United Kingdom
United States
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
®
VIEWSONIC PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
Limited Three (3) year General Warranty
Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years
warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the original lamp
from the date of the first consumer purchase; Europe except Poland: Three (3) years warranty for all parts
excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of
the first consumer purchase; Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years
for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase.
Limited One (1) year Heavy Usage Warranty:
Under heavy usage settings, where a projector’s use includes more than fourteen (14) hours average
daily usage, North and South America: One (1) year warranty for all parts excluding the lamp, one (1)
year for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase;
Europe: One (1) year warranty for all parts excluding the lamp, one (1) year for labor, and ninety (90)
days for the original lamp from the date of the first consumer purchase.
Other regions or countries: Please check with your local dealer or local ViewSonic office for the
warranty information.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s
installed lamp only. All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration, failure, or malfunction resulting from:
a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper
maintenance, unauthorized product modification, or failure to follow instructions supplied
with the product.
b. Operation outside of product specifications.
c. Operation of the product for other than the normal intended use or not under normal conditions.
d. Repair or attempted repair by anyone not authorized by ViewSonic.
e. Any damage of the product due to shipment.
f. Removal or installation of the product.
g. Causes external to the product, such as electric power fluctuations or failure.
Download from Www.Somanuals.com. All Manuals Search And Download.
h. Use of supplies or parts not meeting ViewSonic’s specifications.
i. Normal wear and tear.
j. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support
(please refer to “Customer Support” page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name,
(c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not
be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility
of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,
contact ViewSonic or your local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is
subject to the terms and conditions of the Maintenance Guarantee Card.
com under Support/Warranty Information.
4.3: Projector Warranty
PRJ_LW01 Rev. 1h 06-25-07
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
®
VIEWSONIC PROJECTOR
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the
warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include
remanufactured or refurbished parts or components & accessories.
How long the warranty is effective:
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,
unauthorized attempted repair, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is
displayed on the product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the
attached Customer Support page). You will need to provide your product’s serial number, so please record the product
information in the space provided below on your purchase for your future use. Please retain your receipt of proof of
purchase to support your warranty claim.
For Your Records
Product Name: ________________________
Document Number: ____________________
Purchase Date: ________________________
Model Number: __________________________
Serial Number: ___________________________
Extended Warranty Purchase? _______________(Y/N)
If so, what date does warranty expire? _________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)
your address, (d) a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the
implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
E-Mail: [email protected]
Puebla, Pue. (Matriz):
Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
Veracruz, Ver.:
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
72160 PUEBLA, PUE.
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
Chihuahua
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Distrito Federal:
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Guadalajara, Jal.:
QPLUS, S.A. de C.V.
SERVICRECE, S.A. de C.V.
Av. Coyoacán 931
Av. Niños Héroes # 2281
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Monterrey:
Guerrero Acapulco
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
Tel: 8129-5103
E-Mail: [email protected]
Oaxaca, Oax.:
MERIDA:
ELECTROSER
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
FOR USA SUPPORT:
Tijuana:
STD
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
PRJ_LW03 Rev. 1A 06-25-07
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
