PJ1165
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell'utente
Användarhandbok
Käyttöopas
Ɋɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © ViewSonic Corporation, 2003. All rights reserved.
Apple, Mac and ADB registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation.
VESA and SVGA are registered trademarks of the Video Electronics Standards Association.
DPMS and DDC are trademarks of VESA.
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this material,
or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product
information as it becomes available, please register your projector's
For Your Records
Product Name:
ViewSonic PJ1165
VS10152-1W
Model Number:
Document Number:
A-CD-PJ1165
Serial Number:
Purchase Date:
______________
______________
ViewSonic PJ1165
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector Features
This multimedia projector is used to project various computer signals as well as NTSC/PAL/
SECAM video signals onto a screen. Little space is required for installation and large
images can easily be realized.
• Ultra High Brightness
Crisp, ultra-bright presentations is achieved b y using a UHB (ultra high brightness) lamp
and highly efficient optical system.
• Whisper Mode Equipped
Special mode is available for reducing projector noise to achieve quieter operation.
• User Memory Function
This projector can memorize 4 settings by MY MEMORY function.
• Partial Magnification Function
Interesting parts of images can be magnified for closer viewing.
• Keystone Distortion Correction
Quick correction of distorted images electrically.
Preparation
Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”. Your
projector should come with the items shown there. Contact your dealer anything is missing.
NOTE
• Keep the original packing material for future reshipment. For moving the projector, be
sure to use the original packing material. Use special caution for the lens part.
ViewSonic PJ1165
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
Projector
Elevator button
Elevator foot
Remote sensor
Lens cap
Lens
The picture is projected from
here.
Filter cover
An air filter is inside.
Projector (Front/Right)
RGB port
M1-D port
BNC port
AUDIO IN 1 port
AUDIO IN 2 port
CONTROL port
NETWORK port
AUDIO IN R/L port
VIDEO IN port
S-VIDEO port
COMPONENT port
RGB OUT port
AUDIO OUT port
REMOTE CONTROL port
DC OUT port
Projector (Rear/Left)
AC inlet
Power switch
Remote sensor
Control buttons
See the following page.
ViewSonic PJ1165
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Buttons
STANDBY/ON button and
STANDBY/ON indicator
TEMP indicator
LAMP indicator
VOLUME button
INPUT dial
SEARCH button
M1-D indicator
RGB indicator
BNC indicator
COMPONENT indicator
S-VIDEO indicator
VIDEO indicator
ZOOM buttons
Control Panel on
the Projector
FOCUS buttons
KEYSTONE button
MENU button
RESET button
ENTER button
Cursor buttons S/T/W/X
Remote Control
STANDBY/ON button
This button may not
exist by the model
LASER INDICATOR
VIDEO button
RGB button
SEARCH button
ZOOM buttons
FOCUS buttons
KEYSTONE button
MENU button
BLANK button
ASPECT button
LASER button
Cursor buttons
Mouse move pointer)
ESC button
S/T/W/X
(
RESET button
(
Keyboard
key)
ENTER button
(
Mouse left button)
(Rear)
(
Mouse right button)
POSITION button
AUTO button
PinP buttons
MAGNIFY button
FREEZE button
VOLUME button
MUTE button
Cursor buttons
S
(
/T/W/X
Keyboard
ID CHANGE switch
Arrow keys
)
Remote Control
ViewSonic PJ1165
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Arrangement
WARNING
• Before installation, make sure that the projector is turned off and the power code is
disconnected.
• Do not set up and move the projector, while it is hot.
• Install the projector in a suitable environment according to instructions of the “User’s
Manual – Safety Guide” and this manual.
• The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance. The values shown in the table are calculated for a full size screen. (±10%)
Reference for the 4:3 aspect ratio
[Inches (m)]
Max.
[Inches (cm)]
m:n=1:1 m:n=10:0
Screen Size
Inches (m)
Screen
Lens center
Min.
40 (1.0)
60 (1.5)
46 (1.2)
71 (1.8)
71 (1.8)
107 (2.7)
126 (3.2)
144 (3.7)
181 (4.6)
217 (5.5)
272 (6.9)
364 (9.2)
455 (11.6)
547 (13.9)
12 (30)
18 (46)
24 (61)
36 (91)
70 (1.8)
83 (2.1)
21 (53)
42 (107)
48 (122)
60 (152)
72 (183)
90 (229)
120 (305)
150 (381)
180 (457)
210 (533)
240 (610)
300 (762)
80 (2.0)
95 (2.4)
24 (61)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.1)
250 (6.4)
300 (7.6)
350 (8.9)
400 (10.2)
500 (12.7)
120 (3.0)
144 (3.7)
181 (4.6)
243 (6.2)
304 (7.7)
366 (9.3)
30 (76)
Side View
36 (91)
45 (114)
60 (152)
75 (191)
90 (229)
105 (267)
120 (305)
150 (381)
427 (10.9) 638 (16.2)
489 (12.4) 730 (18.5)
612 (15.5) 913 (23.2)
Reference for the 16:9 aspect ratio
Screen
Lens center
[Inches (m)]
Max.
[Inches (cm)]
Screen Size
Inches (m)
Min.
m:n=1:1
10 (25)
m:n=10:0
23 (58)
40 (1.0)
60 (1.5)
50 (1.3)
77 (2.0)
77 (2.0)
117 (3.0)
137 (3.5)
157 (4.0)
197 (5.0)
237 (6.0)
297 (7.5)
396 (10.1)
496 (12.6)
15 (37)
34 (87)
70 (1.8)
91 (2.3)
17 (44)
40 (102)
46 (116)
57 (145)
69 (174)
86 (218)
114 (291)
143 (363)
172 (436)
200 (508)
229 (581)
257 (654)
80 (2.0)
104 (2.6)
131 (3.3)
158 (4.0)
198 (5.0)
265 (6.7)
332 (8.4)
20 (50)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.1)
250 (6.4)
300 (7.6)
350 (8.9)
400 (10.2)
450 (11.4)
25 (62)
29 (75)
37 (93)
Side View
49 (125)
61 (156)
74 (187)
86 (218)
98 (249)
110 (280)
399 (10.1) 596 (15.1)
466 (11.8) 696 (17.7)
533 (13.5) 795 (20.2)
600 (15.2) 895 (22.7)
ViewSonic PJ1165
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting The Projector’s Elevator
WARNING
• Do not touch about the lens and ventilation openings during use or immediately after
use to prevent a burn.
CAUTION
• To prevent damaging the projector and injuring yourself, always hold the projector
whenever using the elevator buttons to adjust the elevator feet.
1 Press and hold in the elevator buttons.
2 Raise or lower the project or to the desired height and
then release the elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
3 As necessary, you can also finely adjust the height of
the projector by twisting the elevator feet by hand.
Elevator feet
Elevator buttons
ViewSonic PJ1165
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
WARNING
• Whenever attempting to connect other devices to the projector, read thoroughly the
“Quick Start Guide”, this manual and the manual of each device to be connected.
Incorrect connecting could result in fire or electrical shock.
CAUTION
• Turn off all devices prior to connecting them to the projector. Attempting to connect a
live device to the projector may generate extremely loud noises or other abnormalities
that may result in malfunction and/or damage to the device and/or projector.
ATTENTION
• Make sure that you connect devices to the correct port. Incorrect connection may result
in malfunction and/or damage to the device and/or projector. Refer to the section
“Technical” of this manual for the pin assignment of connectors and RS-232C
communication data.
• Some cables may have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one end,
connect the core to the projector.
• Secure the screws on the connectors and tighten.
• Whenever attempting to connect a laptop computer to the projector, be sure to activate
the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
NOTE
• Some computers may have multiple display screen modes. Use of some of these modes
may not be compatible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input, automatic
adjust function may take some time and may not be completed. In this case, you may
not be able to see a check box to select “Yes/No” for the new resolution on Windows.
Then the resolution will go back to the original. It might be recommended to use other
CRT or TFT monitors to change the resolution.
NOTE
Plug-and-Play Capability
Plug-and-Play is a system incorporated in the computer, its operating system and
peripheral equipment (i.e. display devices).
This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB port (DDC 1/2B compatible). Plug-and-Play may no t work properly if any other
type of connection is attempted.
• Please use the standard drivers in your computer, as this projector is a Plug-and-Play
monitor.
ViewSonic PJ1165
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Please refer to the following (for example) for connecting your devices. See the rear of the
projector. You can see the ports.
Examples of connection with a computer
Computer
Projector
RGB cable
RGB out
Audio out
Stereo Mini cable
RS-232C cable
RS-232C port
Network port
CAT-5 cable
ꢀIf using a M1-D input
DVI port
M1-D cable
USB port
Audio out
Stereo Mini cable
ꢀIf using a BNC input
RGB out
BNC cable
Stereo Mini cable
Audio out
ViewSonic PJ1165
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Examples of connection with a VCR/DVD Player
VCR/DVD Player
Projector
Audio out (R)
Audio out (L)
Video out
ꢀIf using a s-video signal
S-video out
S-video cable
Audio out (R)
Audio out (L)
ꢀIf using a component signal
CR/PR out
CB/PB out
Y out
Audio out (R)
Audio out (L)
ꢀIf using a SCART RGB input
SCART
RGB out
SCART
adapter
ViewSonic PJ1165
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a monitor
Monitor
Projector
RGB OUT
RGB in
RGB cable
Connecting to a speaker (with amplifier)
Speaker
Projector
AUDIO OUT
Audio in
Stereo Mini cable
Connecting The Power Supply
WARNING
• Use extra caution when connecting the power cord as incorrect or faulty connections
may result in fire and/or electrical shock. Please adhere to the “Quick Start Guide” and
the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1 Connect the connector of the power cord
to the AC inlet of the projector.
2 Firmly plug the power cord’s plug into the
outlet.
AC Inlet
Outlet
Plug
Connector
ViewSonic PJ1165
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
About The Laser Pointer
WARNING
• The laser pointer of the remote control is used in place of a finger or rod. Never look
directly into the laser beam outlet or point the laser beam at other people. The laser
beam can cause vision problems.
CAUTION
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This remote control has a laser pointer in place of a finger or rod. The laser beam works
and the LASER INDICATOR lights while the LASER button is pressed.
Putting Batteries
CAUTION
About the battery
• Keep a battery away from children and pets.
• Use only the battery specified: two AA batteries.
• Do not mix new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading the battery
(as indicated in the remote control).
• Dispose of batteries in accord with environmental laws.
1 Remove the battery cover. 2 Insert the batteries. Align 3 Close the battery cover.
Slide back and remove
the battery cover in the
direction of the arrow.
and insert the two AA
batteries according to
their plus minus terminals
(as indicated in the
remote control).
Replace the battery cover
in the direction of the
arrow and snap it back
into place.
ViewSonic PJ1165
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating The Remote Control
CAUTION
• Do not disassemble the remote control.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Do not drop or other wise expose the remote control to physical impact.
• Do not get the remote control wet or place objects. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won’t be using the remote control for an extended period.
NOTE
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely close range (such
as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote
control may cause to function. Adjust the direction of the projector to keep light from
directly hitting the projector’s remote sensor.
The remote control works with the
projector’s remote sensors.
Front remote sensor is 3 meters with a
60 degree range (30 degrees to the left
and right of a remote sensor).
Rear remote sensor is 3 meters with a 4
degree range (2 degrees to the left and
right of a remote sensor).
approximately
3 meters
approximately
3 meters
Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a
remote signal to the sensor directly, please try.
Since the remote control uses infrared light to send signals to the projector (Class 1 LED),
be sure to use the remote control in an area free from obstacles that could block the remote
control’s output signal to the projector.
memo
You can use the remote control as a wired remote control, by connecting the REMOTE
CONTROL port of the main unit and remote control via an audio cable (3.5 dia. Stereo mini
cable with plugs).
Using The Remote ID Feature
This is the function to properly use when you use two or three same type
projectors at the same time. This function should be used combining a
setup of a projector.
1 Set the ID number to the projector beforehand, refer ring to the item “IR
REMOTE ID” of the section “OPTION Menu”.
memo
When the ALL is selected to the item “IR REMOTE ID” of the
OPTION menu, the projector is controlled by a remote control
irrespective of the position of the ID CHAGE switch.
2 Slide the knob of the switch into the position of the ID number of the
projector you want to control.
ID CHANGE
switch
ViewSonic PJ1165
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using The Mouse/Keyboard Control Function
CAUTION
• Before connecting, read the manuals of the device you will connect. Mistaken use of
the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Do not unplug the connector cables while the computer is operating.
Using the USB control feature, you can use the remote control as a simplified mouse or
keyboard of the computer.
Connect the USB port of the projector to the computer via the USB cable.
memo
The USB control can be used with
Windows 95 OSR 2.1 or higher. It may
not be possible to use the remote
control, depending on the computer’s
configurations and mouse drivers.
Mouse left button
Mouse move pointer
Keyboard
memo
The function can be used only for the
functions illustrated on the right.
The projector would be enumerated
Arrow keys
Mouse right button
memo
as a mouse and a keyboard of HID
(Human Interface Device) class devices,
after connecting cable.
Keyboard
key
(Front)
(Rear)
ViewSonic PJ1165
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On/Off
WARNING
• When the power is On, a strong light emitted. Do not look into the lens or vents of the
projector.
NOTE
• Turn the power on/off in right order. Please power on the projector before the connected
devices. Power off the projector after the connected devices.
Turning On The Power
1 Remove the lens cap.
STANDBY/ON button / indicator
2 Set the power switch to [ | ] (On).
The STANDBY/ON indicator will light to solid
orange.
3 Press the STANDBY/ON button.
The projector lamp will light up and the
STANDBY/ON
STANDBY/ON indicator will begin blinking green.
When the power is completely on, the indicator
button
will stop blinking and light green.
4 Select an input signal according to the section
Power switch (On position)
“Selecting An Input Sign al” of the following page.
Turning Off The Power
1 Press the STANDBY/ON button.
The message “Power off?” will appear on the
STANDBY/ON button / indicator
screen for approximately 5 seconds.
2 Press the STANDBY/ON button again while
“Power off?” message is visible.
The projector lamp will go off, and the STANDBY/
ON indicator will begin blinking orange. The
STANBY/ON indicator will stop blinking and light
to solid orange when the lamp cooling is complete.
3 Set the power switch to [O] (Off).
STANDBY/ON
button
Power switch (Off position)
The STANDBY/ON indicator will go off.
4 Attach the lens cap.
ViewSonic PJ1165
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating
Selecting An Input Signal
1 Select an input signal.
ꢀUsing the INPUT dial
SEARCH button
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to
project.
INPUT dial
ꢀUsing SEARCH button
Press the SEARCH button of the projector or the
remote control.
Pressing the button automatically cycles through
input ports and displays the picture of retrieved
signal.
memo
If no signal is found or the projector is
VIDEO button
RGB button
unstable to find an input signal at any of its ports,
it will turn to the state it was in prior to the search.
ꢀUsing RGB button
Press the RGB button of the remote control.
Pressing the button toggles between the RGB
ports as shown below Select the signal you wish
to project.
SEARCH button
ꢀUsing VIDEO button
FOCUS
buttons
ZOOM
buttons
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO
ports as shown below Select the signal you wish
to project.
2 Use the ZOOM buttons to adjust the screen size.
3 Use the FOCUS buttons to adjust the focus.
ViewSonic PJ1165
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting The Aspect Ratio
1 Press the ASPECT button to toggle between the modes for
aspect ratio.
ꢀAt a M1-D signal
ASPECT
button
memo
NORMAL keeps the original aspect ratio of the input
signal.
ꢀAt a RGB signal (not M1-D)
ꢀAt a video signal
memo
At a HDTV signal of 1125i or 750p, only 16:9 can be
selected.
Using The Automatic Adjustment Feature
memo
The automatic adjustment operation requires approximately 10 seconds. Also,
please note that it may not function correctly with some input.
1 Press the AUTO button.
ꢀAt a RGB signal
The vertical position (V POSITION), the horizontal position (H
POSITION), the clock phase (H PHASE) and the horizontal
size (H SIZE) will be automatically adjusted.
memo
Make sure that the application window is set to its
AUTO
button
maximum size prior to attempting to use this feature. Dark
pictures may still be incorrectly adjusted. Use a bright screen
when adjusting.
ꢀAt a video signal
The signal type mode best suited for the respective input
signal will be selected automatically.
memo
This function is available only when the AUTO is selected
to the item VIDEO of the INPUT menu. For a component
video signal, the signal type is identified automatically
independently of this function.
ViewSonic PJ1165
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting The Picture Position
memo
This function is available only for RGB signals.
1 Press the POSITION button.
As illustrated on the right, a dialog
will appear on the screen to aid you
in adjusting the picture position.
Cursor
buttons
2 Use the cursor buttons S/T/W/X to
adjust the position.
POSITION
button
memo
When you want to initialize the position, press the
RESET button during adjustment.
RESET
button
3 Press the POSITION button again to close the dialo and
complete this operation.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
Correcting The Keystone Distortion
1 Press the KEYSTONE button.
As illustrated on the right, a dialog will appear
on the screen to aid you in correcting the
keystone distortion.
Cursor
buttons
2 Use the cursor buttons W/X to select the
direction of distortion to correct ( or ).
3 Use the cursor buttons S/T to correct the distortion.
KEYSTONE
button
4 Press the KEYSTONE button again to close the dialog and
complete this operation.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
ViewSonic PJ1165
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting The Volume
1 Press the VOLUME button.
As illustrated on the right, a dialog will appear
on the screen to aid you in adjusting the
volume.
Cursor
buttons
2 Use the cursor buttons S/T to adjust the
volume.
3 Press the VOLUME button again to close the dialog and
VOLUME
button
complete this operation.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
Muting The Sound
1 Press the MUTE button.
As illustrated on the right, a dialog will appear
on the screen indicating that you have muted
the sound.
2 Press the MUTE or VOLUME button again to
restore the sound.
memo
Even if you don’t do anything, the dialog will
MUTE
button
automatically disappear after a few seconds.
Temporarily Blanking The Screen
1 Press the BLANK button.
The input signal screen will shut off, and a BLANK screen
will appear.
BLANK
button
memo
You can set the BLANK screen using the menu. Please
refer to the item “BLANK” of the table of the section
“SCREEN Menu”.
2 Press the BLANK button again to remove the BLANK
screen, and return to the input signal screen.
ViewSonic PJ1165
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing The Screen
1 Press the FREEZE button.
As illustrated on the right, a dialog
will appear on the screen, and the
screen will freeze at the current
image.
2 Press the FREEZE button again to
restore the screen to normal.
FREEZE
button
The icon “||” will change to the icon “X”. And after a couple
of seconds, the dialog will be closed and the screen will be
restored to normal.
memo
The freezing feature will automatically finish if a remote
control’s button that changes some display state (ex.
blanking the screen, displaying a dialog or a menu,
adjusting the picture, changing the input signal) is pressed,
or a button of projector is pressed.
NOTE
• If the projector continues projecting the same image for a long time (i.e. you forget to exit
FREEZE mode), the image might possibly remain as an afterimage. Do not leave the
projector in FREEZE mode for too long.
Using The Magnify Feature
1 Press the MAGNIFY
button.
As illustrated on the right, a dialog
will appear on the screen to aid you
in magnifying the picture.
Cursor
buttons
2 Press the POSITION button, then
use the cursor buttons S/T/W/X to
select the area to zoom.
POSITION
button
3 Press the POSITION button again to finalize the zoom
area.
MAGNIFY
buttons
4 Use the cursor buttons S/T to adjust the zoom level.
5 Press the MAGNIFY
button to close the dialog and
restore the screen to normal.
memo
The magnify feature will automatically finish if the
automatic adjustment is execute, or the aspect, the signal
type mode of video or the signal input state is changed.
ViewSonic PJ1165
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying The Child Window
memo
This feature called “PinP (Picture in Picture)” is available only when a RGB signal is
selected to main screen.
1 Press the PinP button.
The child window with a picture of a video signal will
appear.
2 Press the PinP button again to change the size of the child
window or close the window.
Small child window ꢁ Large child window
PinP button
ꢂ
ꢃ
No child window
memo
You can select the video signal to display in the child
window, and the position of the child window. Please refer
to the items “P.INP. INPUT” and “P.INP. POSIT.” of the table
of the section “INPUT Menu”.
Selecting An Audio Input
memo
This feature is available only when the child window is on the screen.
1 When the child window is on the screen,
press the VOLUME button.
As illustrated on the right, a dialog will appear
on the screen.
Cursor
buttons
2 Use the cursor buttons W/X to select an audio
input.
RGB (Audio input for the main screen)
VOLUME
button
ꢄ
Video (Audio input for the child window)
memo
You also can adjust the volume using the cursor
buttons W/X. Please refer to the section “Adjusting The
Volume”.
3 Press the VOLUME button again to close the dialog and
complete this operation.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
ViewSonic PJ1165
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN, OPTION and NETW ORK. Each of these menus is operated using the same
methods. The basic operations of these menus are as follows.
1 Press the MENU
button. The menu will
appear on the screen.
2 Use the cursor
buttons S/T to
select a menu, then
press the X (or the
ENTER) button to
progress.
ex. Turning off the built-in speaker
1) Press the MENU button.
Cursor
buttons
MENU
button
2) Select the “OPTION” using the T
button, then press the X button.
RESET
button
The display of the
selected menu will
appear.
ESC
3 Use the cursor
buttons S/T to
select an item, then
press the X (or the
ENTER) button to
progress.
button
3) Select the “SPEAKER” using the T
button, then press the X button.
X/
ENTER
button
The operation display
of the selected item
will appear.
4 Use the cursor buttons S/T to operate the 4) Use the cursor button T to select the
item. “TURN OFF”.
memo
When you want to reset the
adjustment, press the RESET button
during the operation. Note that the items
whose functions are performed
simultaneously with operating (ex.
LANGUAGE, WHISPER, H PHASE etc.)
are not reset.
memo
When you want to return to the
previous display, press the W button or
ESC button.
5 Press the MENU button again to close the 5) Press the MENU button again.
menu display and complete this operation.
memo
Even if you don’t do anything, the
menu will automatically disappear after a
few seconds.
ViewSonic PJ1165
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
BRIGHT
Description
Adjust the brightness using the S/T buttons.:
Light ꢅDark
CONTRAST
ASPECT
Adjust the contrast using the S/T buttons.: Strong ꢅWeak
Select an aspect ratio using the S/T buttons.:
ꢀAt a M1-D signal
NORMAL ꢅ4:3 ꢅ16:9
The NORMAL keeps the original aspect ratio of the input signal.
ꢀAt a RGB signal (not M1-D)
4:3 ꢅ16:9
ꢀAt a video signal
4:3 ꢅ16:9 ꢅSMALL
memo
At a HDTV signal of 1125i or 750p, only the 16:9 can be selected.
WHISPER
MIRROR
Select the NORMAL or the WHISPER using the S/T buttons.:
NORMAL ꢅWHISPER
When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Select a mirror status using the S/T buttons.:
NORMAL ꢅH:INVERT ꢅV:INVERT ꢅH&V:INVERT
ex.
LANGUAGE
Select a menu language using the S/T buttons.:
RESET
Select the EXECUTE using the S button to reset the MAIN menu
items.:
EXECUTE ꢆCANCEL
The items of the MAIN menu are collectively returned to the initial
setting. Note that the items “WHISPER” and “LANGUAGE” are not
reset.
ViewSonic PJ1165
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-1 Menu
With the PICTURE-1 menu, the items shown in the table below
can be performed. Perform each operation in accordance with the
instruct ions in the table below.
Item
GAMMA
Description
Select a gamma mode using the S/T buttons.:
NORMAL ꢅCINEMA ꢅDYNAMIC ꢅCUSTOM
Selecting the CUSTOM and then pressing the X (or the ENTER) but-
ton calls the CUSTOM menu.
CUSTOM Menu
Select an item using the S/T buttons, and
press the X (or the ENTER) button to perform
each function.
GAMMA ꢅCOLOR TEMP ꢅR ꢅG ꢅB
memo
The R, G and B can be selected only when the USER is selected
under the COLOR TEMP.
GAMMA Adjust the gamma data using the S/T buttons.: Up ꢅ
Down
COLOR Select a color temperature using the S/T buttons.:
HIGH ꢅMIDDLE ꢅLOW ꢅUSER
TEMP
R
Adjust the red color level for the USER mode of the COLOR
TEMP using the S/T buttons.: Strong ꢅWeak
G
B
Adjust the green color level for the USER mode of the
COLOR TEMP using the S/T buttons.: Strong ꢅWeak
Adjust the blue color level for the USER mode of the
COLOR TEMP using the S/T buttons.: Strong ꢅWeak
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
Adjust the red color balance using the S/T buttons.:
Strong ꢅWeak
Adjust the green color balance using the S/T buttons.:
Strong ꢅWeak
Adjust the blue color balance using the S/T buttons.:
Strong ꢅWeak
Adjust the sharpness using the S/T buttons.:
Clear ꢅSoft
memo
This item can be selected only at a video signal.
COLOR
TINT
Adjust the whole color using the S/T buttons.:
Strong ꢅWeak
memo
This item can be selected only at a video signal.
Adjust the tint using the S/T buttons.:
Green ꢅRed
memo
This item can be selected only at a video signal.
(This table is continued to the following page.)
ViewSonic PJ1165
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-1 Menu (Continued)
Item
Description
MY MEMORY
Select a command to load or save using the S/T buttons, and then
press the X (or the ENTER) button to perform the function.:
This projector has 4 numbered memories for adjustment data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current
adjustment data on the memory whose number corresponds with the
command’s number.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
the memory whose number corresponds with the command’s number,
and adjusts the picture automatically depending on the data.
RESET
Select the EXECUTE using the S button to reset the PICTURE-1
menu items.:
EXECUTE ꢆCANCEL
The items of the PICTURE-1 menu are collectively returned to the
initial setting. Note that the items “MY MEMORY” and “GAMMA” of the
CUSTOM menu under the item “GAMMA” are not reset.
ViewSonic PJ1165
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-2 Menu
With the PICTURE-2 menu, the items shown in the table below
can be performed. Perform each operation in accordance with the
instruct ions in the table below.
memo
This menu cannot be selected at a M1-D signal.
Item
Description
V POSITION
H POSITION
H PHASE
Adjust the vertical position using the S/T buttons.:
Up ꢅDown
memo
This item can be selected only at a RGB signal.
Adjust the horizontal position using the S/T buttons.:
Left ꢅRight
memo
This item can be selected only at a RGB signal.
Adjust the horizontal phase to eliminate flicker using the S/T
buttons.:
Right ꢅLeft
memo
This item can be selected only at a RGB signal or a component
video signal other than a COMPONENT port input of 525i/625i/
SCART RGB.
H SIZE
Adjust the horizontal size using the S/T buttons.:
Large ꢅSmall
memo
This item can be selected only at a RGB signal.
memo
When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
pressing the RESET button during this operation.
OVER SCAN
RESET
Adjust the over-scan ratio using the S/T buttons.:
Large ꢅSmall
memo
This item can be selected only at a video signal.
memo
When this adjustment is too large, certain degradation may
appear at the frame area of the picture. In such a case, please adjust
small.
Select the EXECUTE using the S button to reset the PICTURE-2
menu items.:
EXECUTE ꢆCANCEL
The items of the PICTURE-2 menu are collectively returned to the
initial setting. Note that the item “H PHASE” is not reset.
ViewSonic PJ1165
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT Menu
With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
Description
COLOR SPACE
Select a color space mode using the S/T buttons.:
AUTO ꢅRGB ꢅSMPTE240 ꢅREC709 ꢅREC601
Selecting the AUTO automatically selects the optimum mode.
memo
This item can be selected only at a RGB signal or a component
video signal other than a COMPONENT port input of 525i/625i/
SCART RGB.
memo
The AUTO operation may not work well at some signals. In such a
case, select the SMPTE240 or the REC709 for a HDTV signal.
COMPONENT
VIDEO
Select a function of COMPONENT port using the S/T buttons.:
COMPONENT ꢅSCART RGB
When the SCART RGB is selected, the COMPONENT port function
as a port for a SCART RGB signal input. Please refer to the section
“Connecting Your Devices”.
Select a signal type mode using the S/T buttons.:
AUTO ꢅNTSC ꢅPAL ꢅSECAM ꢅNTSC4.43 ꢅM-PAL ꢅN-PAL
Selecting the AUTO automatically selects the optimum mode.
memo
This item is performs only at a video signal from the VIDEO port
or the S-VIDEO port. For a component video signal, the signal type is
identified automatically independently of this function.
memo
The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. a irregular picture, a color lack), please
select the mode depending on the input signal.
3D-YCS
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, the 3D-YCS mode works for a
completely still image, or images with few motions.
memo
This item performs only at a video signal of NTSC3.58.
memo
When this function performs, the setting of the item “VIDEO NR”
of this INPUT menu is not effective.
VIDEO NR
Select a noise reduction level using the S/T buttons.:
HIGH ꢅMIDDLE ꢅLOW
The noise on screen is reduced according to the selected level.
memo
This item performs only at a video signal from the VIDEO port or
the S-VIDEO port. At a video signal of NTSC3.58, this function
performs only when the TURN OFF is selected to the item “3D-YSC”
of this INPUT menu.
memo
When this adjustment is excessive, certain degradation may
appear on the picture.
(This table is continued to the following page.)
ViewSonic PJ1165
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT Menu(Continued)
Item
Description
P.IN P. INPUT
Select a signal input port for the child window using the S/T buttons.:
VIDEO ꢅS-VIDEO
memo
About the child window, please refer to the section “Displaying the
Child Window”.
P.IN P. POSIT.
Select the display position of the child window using the S/T
buttons.:
memo
About the child window, please refer to the section “Displaying the
Child Window”.
POWERUP
INPUT
Select a signal input port to display just when the projector is turned
on, using the S/T buttons.:
LAST INPUT ꢅM1-D ꢅRGB ꢅBNC ꢅCOMPONENT ꢅS-
VIDEO ꢅVIDEO
Selecting the LAST INPUT selects the port that was used at the last
time.
INFORMATION
Pressing the X (or the ENTER) button displays the INPUT
INFORMATION menu.
The INPUT INFORMATION menu shows the information about the
current signal input as illustrated below.
memo
The “FRAME LOCK” message means the frame lock function is
working. This function automatically works when a RGB signal with
vertical frequency of 50 to 60 is input, and it displays a moving picture
more smoothly.
memo
The “SACRT RGB” message means the COMPONENT port is
working as a SCART RGB port. Please refer to the item
“COMPONENT” in this table.
S2-ASPECT
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, an S2-video signal can be identified
and the optimum aspect ratio is automatically selected.
memo
This item is performs only at a S-VIDEO signal.
memo
When the ASPECT button is used or the item “ASPECT” of the
MAIN menu is operated, the TURN OFF will be automatically selected
to this item.
RESET
Select the EXECUTE using the S button to reset the INPUT menu
items.:
EXECUTE ꢆCANCEL
The items of the INPUT menu are collectively returned to the initial
setting. Note that the item “INFORMATION” is not reset.
ViewSonic PJ1165
28
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO Menu
With the AUTO menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
ADJUST
Description
Pressing the X (or the ENTER) button performs the automatic
adjustment.
ꢀAt a RGB signal
The vertical position (V POSITION), the horizontal position (H
POSITION), the clock phase (H PHASE) and the horizontal size (H
SIZE) will be automatically adjusted.
memo
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. Dark pictures may still be
incorrectly adjusted. Use a bright screen when adjusting.
ꢀAt a video signal
The signal type mode best suited for the respective input signal will
be selected automatically.
memo
This function is available only when the AUTO is selected to the
item “VIDEO” of the INPUT menu. For a component video signal, the
signal type is identified automatically independently of this function.
memo
This operation requires approximately 10 seconds, and the
message “AUTO IN PROGRESS” is displayed during the operation.
This operation may not work well at some signals. If the picture
memo
becomes unstable (ex. a irregular picture, a color lack), please select
the suitable mode to the item “VIDEO” of the INPUT menu.
POWER OFF
Set the time using the S/T buttons.:
Long (max. 99 minutes) ꢅShort (min. 0 minute = DISABLE)
ex.
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with a
proper signal (without no-signal and an unsuitable signal) reaches at
the set time. Please refer to the section “Turning Off The Power”.
POWER ON
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, you can turn the projector on without
pressing the STANDBY/ON button. Please refer to the section
“Turning Off The Power”.
(This table is continued to the following page.)
ViewSonic PJ1165
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO Menu (continued)
Item
Description
SEARCH
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, detecting no signal cycles through
input ports and displays the picture of retrieved signal.
M1-D ꢁ RGB ꢁ BNC
ꢂ
ꢃ
VIDEO ꢆS-VIDEO ꢆCOMPONENT
memo
When the TURN ON is selected, pressing the RGB button selects
the M1-D ports, and pressing the VIDEO button selects the
COMPONENT port.
memo
If no signal is found or the projector is unstable to find an input
signal at any of its ports, it will return to the state it was in prior to the
search.
RESET
Select the EXECUTE using the S button to reset the AUTO menu
items.:
EXECUTE ꢆCANCEL
The items of the AUTO menu are collectively returned to the initial
setting. Note that the item “ADJUST” is not reset.
ViewSonic PJ1165
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN Menu
With the SCREEN menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
Item
BLANK
Description
Select a type of the BLANK screen using the S/T buttons.:
MyScreen ꢅORIGINAL ꢅBLUE ꢅWHITE ꢅBLACK
The BLANK screen is the screen, which is displayed by pressing a
button.
The MyScreen is the screen you can register a desired screen, and
the ORIGINAL is the existing standard screen. The BLUE, the WHITE
and the BLACK are the non-pattered (plain) screens in each color.
memo
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
memo
For the MyScreen, please refer to the item “MyScreen” in this
table.
START UP
Select a type of the START UP screen using the S/T buttons.:
MyScreen ꢅORIGINAL ꢅTURN OFF
The START UP screen is the screen, which is displayed by detecting
no signal or an unsuitable signal.
The MyScreen is the screen you can register a desired screen, and
the ORIGINAL is the existing standard screen. When the TURN OFF
is selected, the BLUE is used.
memo
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK after several minutes. If
also the BLANK screen is the MyScreen or the ORIGINAL, it will
change to the BLACK screen.
memo
About the MyScreen, please refer to the item “MyScreen” in this
table. About the BLUE, BLACK and BLANK screens, please refer to
the item “BLANK” in this table.
MyScreen
Pressing the X (or the ENTER) button starts the MyScreen
registration. Please see the flow chart on the following page.
MyScreen SIZE
Select the size of the MyScreen using the S/T buttons.:
x1 ꢅFULL
MyScreen LOCK Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
The TURN ON disables the operation of the item “MyScreen” of this
SCREEN menu.
MENU POSITION Adjust the menu position using the S/T/W/X buttons.:
Up
ꢂ
Left ꢆ+ ꢁRight
ꢃ
Down
memo
To finish this operation, press the ESC button but not the W
button.
(This table is continued to the following page.)
ViewSonic PJ1165
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO Menu (continued)
Item
Description
MESSAGE
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, the following message function
works.
The message of the “AUTO IN PROGRESS” for the auto
adjustment.
The message of the “NO INPUT IS DETECTED”
The message of the “SYNC IS OUT OF RANGE”
The message of the “Searching…”
The message of the “Detecting…”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of “FOCUS” by adjusting the focus.
RESET
Select the EXECUTE using the S button to reset the SCREEN menu
items.:
EXECUTE ꢆCANCEL
The items of the SCREEN menu are collectively returned to the initial
setting.
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu.
Press the X button
The MyScreen appears.
Do you capture the picture from
the current screen?
NO: Press the ESC/RESET button
If the ESC/RESET
button
YES: Press the ENTER button
The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture which you want
to use, using S/T/W/X buttons, and press the ENTER
button to register.
Registering.
It takes about 1 minute to register.
Just when the picture registration is completed the registered
screen and the message of the right is displayed for a few
seconds.
If the picture registration failed, the message of the right is dis-
played for a few seconds.
ViewSonic PJ1165
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION Menu
With the OPTION menu, the items shown in the table below can
be performed. Perform each operation in accordance with the
instructions in the table below.
Item
VOLUME
Description
Adjust the volume using the S/T buttons.:
High ꢅLow
SPEAKER
Select the TURN ON or the TURN OFF using the S/T buttons.:
TURN ON ꢅTURN OFF
When the TURN ON is selected, the built-in speaker works.
IR REMOTE
Select a remote sensor using the S/T button (1), then
switch it using the ENTER button (2).:
(1) FRONT ꢅTOP ꢅREAR (2) ꢇ(Off) ꢅꢈ(On)
memo
A sensor cannot be turned off when the other two are
off. Always at least one sensor is on.
IR REMOTE ID
Select a number as an ID number for remote control using the S/T
buttons.:
ALL ꢅ1 ꢅ2 ꢅ3
The projector is controlled by the remote control whose ID CHANGE
switch is set into the position of the same number as this number.
When the ALL is selected, the projector is controlled by a remote
control irrespective of the position of the ID CHANGE switch.
memo
Please refer to the section “Using The Remote ID Feature”.
LAMP TIME
Pressing the RESET button for about 3 seconds displays the LAMP
TIME menu.
Select the RESET using S button to reset the timer.:
RESET ꢆCANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo
Perform this function only when you have replaced the lamp. The
lamp timer counts the used time of the current lamp, to display the
messages about the lamp. Incorrect performing causes incorrect
operation of the messages.
memo
About replacing the lamp, please refer to the section“Lamp”.
FILTER TIME
Pressing the RESET button for about 3 seconds displays the FILTER
TIME menu.
Select the RESET using S button to reset the timer.:
RESET ꢆCANCEL
Selecting the RESET resets the count of the lamp timer to 0.
memo
Perform this function only when you have cleaned or replaced the
air filter. The filter timer counts the used time of the air filter after
cleaning or replacement, to display the messages about the air filter.
Incorrect performing causes incorrect operation of the messages.
memo
About caring for the air filter, please refer to the section “Air Filter”.
(This table is continued to the following page.)
ViewSonic PJ1165
33
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION Menu (continued)
Item
Description
SERVICE
Pres sing the X (or the ENTER) button calls the
SERVICE menu.
SERVICE Menu
Select an item using the S/T buttons, and press the
X (or the ENTER) button to perform each function.:
FANSPEED ꢅAUTO ADJUST ꢅLENS TYPE ꢅLENS LOCK
FANSPEED Select the fan speed level using the S/T buttons.:
HIGH ꢅNORMAL
The HIGH ups rotation speeds of fans, though. Please
use this function in using a projector at highlands etc.
memo
Note that the projector is noisier when the HIGH is
selected.
AUTO
ADJUST
Select the ENABLE or the DISABLE using the S/T
buttons.:
ENABLE ꢅDISABLE
When you want to keep the current adjustment state,
select signal change to a RGB signal performs the
automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE).
LENS TYPE Select the lens type currently used using the S/T
buttons.:
AUTO ꢅ1 ꢅ2 ꢅ3 ꢅ4 ꢅ5
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo
This setting has an influence on the keystone
distortion etc.
memo
About the optional lens ask your dealer.
LENS
LOCK
Select the ENABLE or the DISABLE using the S/T
buttons.:
ENABLE ꢅDISABLE
Selecting the ENABLE locks the adjustment of the lens
shift, the zoom and the focus.
RESET
Select the EXECUTE using the S button to reset the OPTION menu
items.:
EXECUTE ꢆCANCEL
The items of the OPTION menu are collectively returned to the initial
setting. Note that the items “VOLUME”, “LAMP TIME” and “FILTER TI
ME” are not reset.
ViewSonic PJ1165
34
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK Menu
This projector provides the NETWORK function. If you use this
function, please set up the projector according to the Network
environment in which you use it.
memo
When you use a Network suitable to the DHCP function, the
following operation is not required commonly, because the TURN
ON is selected to the item “DHCP” at the shipment time. Please see the section “Network
Setting Up”.
Item
SETUP
Description
Pressing the X (or the ENTER) button calls
the IP ADDRESS menu.
memo
This item performs only when the TURN
OFF is set to the item “DHCP” of this
NETWORK menu.
The IP Address is identification number of the projector on the
Network.
1. Set the IP Address using the S/T buttons.
memo
The same number as the IP Address of other units cannot be
used.
Pressing the X (or the ENTER) button at the
IP ADDRESS menu calls the SUBNET
MASK menu. The SUBNET MASK is an
address of the Network.
2. Set the same number as the address of
the Network to be used.
Pressing the X (or the ENTER) button at the
SUBNET MASK menu calls the DEFAULT
GATEWAY menu. The DEFAULT GATEWAY
is the address of the main device.
3. Set the same number as the address of
the device as gateway to an outer Network.
DHCP
Select the TURN ON or the TURN OFF using the S/T
buttons. :
TURN ON Ù TURN OFF
When you use a Network unsuitable to the DHCP
function, select the TURN OFF.
INFORMATION
RESET
Pressing the X (or the ENTER) button
displays the INFORMATION menu.
The INFORMATION menu shows the
information about the current Network setting
as illustrated below.
Select the EXECUTE using the S button to reset the NETWORK
menu items. :
EXECUTE Õ CANCEL
The items of the NETWORK menu are collectively returned to the
initial setting.
ViewSonic PJ1165
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Setting Up
This projector provides the NETWORK function. If you use this function, please consult
your dealer for information.
To start, connect the NETWORK port to a gateway device via a RJ-45 (10BASE-1) cable,
then set up the projector according to the Network environment in which you use it.
When you use a Network unsuitable to the DHCP function
Please set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using the
NETWORK menu, referring to the section “NETWORK Menu”.
When you use a Network suitable to the DHCP function or has been set up
You can set the IP Address, the Subnet Mask, the Gateway and the DHCP (on/off) using a
Web Browser of the computer connected to the Network. Although it needs a Web Browser
of Internet Explorer 4.0 or higher.
Input the same IP address as set to the projector, to the Web Browser of the computer
connected to LAN.
ex. Case of IP Address = 192.168.1.11
1) Input “http://192.168.1.11”.
2) Click “ENTER”.
3) Input the required data according to the screen.
4) Make sure of the input data, then click "Write".
memo
These setting will be active after reboot.
These setting will be stored, and used when
DHCP is OFF.
5) Click “Return to top page”.
6) Click “REBOOT” to complete this operation.
ViewSonic PJ1165
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp
WARNING
HIGH
VOLTAGE
HIGH
HIGH
TEMPERATURE PRESSURE
The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud
bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that
each lamp has a different lifetime, and some may burst or burn out soon after you start
using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into
the lamp housing, and for gas containing mercury to escape from the projector’s vent
holes
About disposal of a lamp
• This product contains a mercury lamp; do not put in trash. Dispose of in accord with
environmental laws.
• For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does), unplug the
power cord from the outlet, and make sure to request a replacement lamp
from your local dealer. Note that shards of glass could damage the
projector’s internals, or cause injury during handling, so please do not try to
clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does), ventilate the
Disconnect
room well, and make sure not to breathe the gas that comes out of the
projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, make sure the power switch is off and the power
the plug from
the power
outlet
cable is not plugged in, then wait at least 45 minutes for the lamp to cool
sufficiently. Handling the lamp while hot can cause burns, as well as
damaging the lamp.
• Do not open the lamp cover while the projector is suspended from above.
This is dangerous, since if the lamp’s bulb has broken, the shards will fall out
when the cover is opened. In addition, working in high places is dangerous,
so ask your local dealer to have the lamp replaced even if the bulb is not
broken.
• Do not use the projector with the lamp cover removed. At the lamp replacing,
make sure that the screws are screwed in firmly. Loose screws could result
in damage or injury.
• Use only the lamp of the specified type PRJ-RLC-011.
• If the lamp breaks soon after the first time it is used, it is possible that there
are electrical problems else where besides the lamp. If this happens, contact
your local dealer or a service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to burst
during use.
• If the indicators or a message prompts you to replace the lamp (see the
section “Related Messages” and “Regarding the indicator Lamps”), replace
the lamp as soon as possible. Using the lamp for long periods of time, or
past the replacement date, could cause it to burst. Do not use old (used)
lamps; this is a cause of breakage.
ViewSonic PJ1165
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing The Lamp
If the indicators or a message prompts you to replace the lamp, replace the lamp as soon
as possible.
1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least
45 minutes.
2 Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number. If the
projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to
replace the lamp.
In the case of replacement by yourself,
Lamp cover knob
Lamp cover
3 After making sure that the projector has
cooled adequately, slide the knob of a lamp
cover lock as shown in the Figure.
Then, one side of the lamp cover is raised.
Pull up the lamp cover and remove it, as
shown in the Figure.
4 Unscrew the 3 screws, and slowly pull out
the lamp by the handle. Becareful not to
touch the inside of the lamp case.
Screws
5 Insert the new lamp, and tighten the 3
screws firmly to lock it in place.
6 Interlocking the 2 tabs of the lamp cover to
the projector, put the lamp cover on the
projector.
Tabs
Then push the point of the lamp cover to fix
it, as shown in the figure. Make sure that
the lamp cover doesn’t come up.
7 Turn on the projector power, and reset the
lamp timer.
(1) While the projector running, press the
MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the S/T button, then press the X button
or ENTER button.
(3) Choose the “LAMP TIME” using the S/T button, then press and hold the RESET
button for 3 seconds.
(4) Choose the “RESET” using the S button.
memo
Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of
resetting after replacement) will result in incorrect message functions.
ViewSonic PJ1165
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Air Filter
WARNING
• Please carefully read the “Quick Start Guide”.
• Before caring the air filter, make sure the power switch is off and the power cable is not
plugged in, then to replacing wait at least 45 minutes for the lamp to cool sufficiently.
• Use only the air filter of the specified type. Please call ViewSonic Tech Support for P/N.
• Do not use the projector with the air filter and filter cover removed. The use without the
air filter could result in damage.
CAUTION
• If the air filter becomes clogged by dust or the like, internal temperature rises and could
cause malfunction. The power is automatically turned off in order to prevent the
projector from overheating internally.
Caring For The Air Filter
The air filter should be cleaned about every 100 hours. If the indicators or a message
prompts you to clean the air filter, clean the air filter as soon as possible. If the soiling will
not come off the air filter, or it becomes damaged, then it needs to be replaced. Pleas e
replace the air filter as soon as possible.
memo
When you replace the lamp, please replace also the air filter.
1 Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least
45 minutes.
2 After making sure that the projector has
Hold the release but-
tons of the filter cover
while pulling down it.
cooled adequately, remove the filter cover
and the air filter.
3 Apply a vacuum cleaner to the filter cover and
the air filter to clean.
If the soiling will not come off the air filter, or it
becomes damaged, it needs to be replaced.
If the air filter needs to be replaced, contact
your dealer to prepare A new air filter. Tell the
dealer you’re air filter type.
4 Insert the cleaned air filter or a new air filter,
and replace the filter cover.
5 Turn on the projector power, and reset the
filter timer.
Hold the release button
of the air filter while pull-
ing out it.
(1) While the projector running, press the
MENU button to open the menu.
(2) Choose the “OPTION” on the menu using
the S/T button, then press the X button
or ENTER button.
(3) Choose the “FILTER TIME” using the S/
T button, then press and hold the RESET button for 3 seconds.
(4) Choose the “RESET” using the S button.
memo
Incorrectly resetting of the filter timer (resetting without replacement, or neglect of
resetting after replacement) will result in incorrect message functions.
ViewSonic PJ1165
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Care
WARNING
• Please carefully read the “Quick Start Guide”.
• Before caring the air filter, make sure the power switch is off and the power cable is not
plugged in.
• Be cautious of high temperature. Do not touch about the lens and ventilation openings
during use or immediately after use prevent a burn.
• Never try to care for the inside of the unit yourself. Doing so is dangerous.
CAUTION
In correct care could have adverse influence such as coloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below, including benzene and
paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
Caring For The Inside Of The Projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years.
Caring For The Lens
1 Turn off the projector, and unplug the power cord.
2 Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Caring For The Cabinet And Remote Control
1 Turn off the projector, and unplug the power cord.
2 Wipe lightly with gauze or a soft cloth.
memo
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and
wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
ViewSonic PJ1165
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Related Messages
When the projector power is on, messages such as those shown below may be displayed.
When any such message is displayed on the screen, please respond as described below. If
the same mess age is displayed after the treatment, or if a message other than the
following appears, please contact your dealer or service company.
memo
Although these messages will be automatically disappeared around several minutes, it
will be reappeared every time the power is turned on.
Message
Description
After the lamp running reaches 2000 hours, the
warning message is displayed, but it won’t
shut the unit off. The message display for 30
seconds when the PJ is turned on. If we push any
button while displaying the message, the message
disappear.
To maximize performance,
lamp replacement is
recommended.
CLEAN THE AIR FILTER
The time the filter timer has counted has
reached 100 hours.
POWER OFF FIRST, THEN CLEAN Please clear or change the air filter by referring to
THE AIR FILTER. AFTER
CLEANING THE AIR FILTER,
RESET THE FILTER TIMER.
the section “Air Filter”. After caring for the air filter,
please be sure to reset the filter timer.
There is no input signal.
Please confirm the signal input connection, and
the status of the signal source.
The horizontal or vertical wavelength of the
inputted signal is outside of the response
parameters of this unit.
Please confirm the specs for this unit or the signal
source specs.
ViewSonic PJ1165
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding The Indicator Lamps
Lighting and blinking of the STANDBY/ON indicator, the LAMP indicator and the TEMP
indicator have the meanings as described in the table below. Please respond in according
with the instructions within the table. If the same indication is displayed after the treatment,
or if an indication other than the following is displayed, please contact your dealer or service
company.
NOTE
• When the interior portion has become overheated, for safety purposes, the power
source is automatically turned off, and the indicator lamps may also be turned off. In
such a case, press the [O] (Off) side of the main power switch, and wait at least
45minutes. After the projector has sufficiently cooled down, please make confirmation of
the attachment state of the lamp and lamp cover, and then turn the power on again.
STANDBY/
ON indicator indicator
LAMP
TEMP
indicator
Description
Lighting in
Orange
The projector is in a standby state.
Turned off Turned off
Turned off Turned off
Turned off Turned off
Turned off Turned off
Please refer to the section “Power On/Off”.
Blinking in
The projector is warming up.
Please wait.
Green
Lighting in
The projector is in an on state.
Ordinary operations may be performed.
Green
Blinking in
Orange
The projector is cooling down.
Please wait.
The projector is cooling down. A certain error
has been detected.
Blinking in (discretion- (discretion-
Please wait until the STANDBY/ON indicator fin-
ishes blink, and then perform the proper response
measure using the item descriptions below as ref-
erence.
Red
ary)
ary)
The lamp does not light, and there is a
possibility that interior portion has become
heated.
Please turn the power off, and allow the unit to
cool down at least 20 minutes. After the projector
has sufficiently cooled down, please make
confirmation of the following items, and then turn
the power on again.
Lighting in Lighting in
Turned off
Red
Red
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the
treatment, please change the lamp by referring to
the section “Lamp”.
(This table is continued to the following page.)
ViewSonic PJ1165
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding The Indicator Lamps (continued)
STANDBY/
ON indicator indicator
LAMP
TEMP
indicator
Description
Either there is no lamp and/or lamp cover, or
either of these has not been properly fixed.
Please turn the power off, and allow the unit to
cool down at least 45 minutes. After the projector
has sufficiently cooled down, please make confir-
mation of the attachment state of the lamp and
Lighting in Blinking in
Turned off
Red
Red
lamp cover, and then turn the power on again.
If the same indication is displayed after the treat-
ment, please contact your dealer or service com-
pany.
The cooling fan is not operating.
Please turn the power off, and allow the unit to
cool down at least 20 minutes. After the projector
has sufficiently cooled down, please make confir-
mation that no foreign matter has become caught
Lighting in
Blinking in
Turned off
Red
Red
in the fan, etc., and then turn the power on again.
If the same indication is displayed after the treat-
ment, please contact your dealer or service com-
pany.
There is a possibility that interior portion has
become heated.
Please turn the power off, and allow the unit to
cool down at least 20 minutes. After the projector
has sufficiently cooled down, please make confir-
mation of the following items, and then turn the
power on again.
• Is there blockage of the air passage aperture?
Lighting in
Lighting in
Turned off
Red
Red
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treat-
ment, please change the lamp by referring to the
section “Lamp”.
There is a possibility that interior portion has
become overcooled.
Lighting in
Green
Alternative Blinking in
Red
Please use the projector within the usage temper-
ature parameters (0°C to 35°C). After the treat-
ment, resent the power to on.
It is time to clean the air filter, or there is no air
filter.
Please immediately turn the power off, and clean
or change the air filter by referring to the section
“Air Filter”. After cleaning or changing the air filter,
please be sure to reset the filter time. After the
treatment, resent the power to on.
Lighting in Simultaneous Blinking
Green in Red
ViewSonic PJ1165
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Phenomena That May Easily Be Mistaken For Machine
Defects
WARNING
Never use the projector if abnormal operations such as smoke, strange odor, excessive
sound, damaged casing or elements or cables, penetration of liquid or foreign matter, etc.
should occur. In such cases, immediately turn off the power switch and then disconnect
the power plug from the power outlet After making sure that the smoke or odor has
stopped, contact your dealer or service company.
Before requesting repair, please check in accordance with the following chart. If the
situation cannot be corrected, please contact your dealer or service company.
NOTE
• Although bright spots or dark spots may appear on the screen, this is a unique
characteristic of liquid crystal displays, and such do not constitute or imply a machine
defect.
Reference
page(s)
Phenomenon
Cases not involving a machine defect
The power cord is not plugged in.
Correctly connect the power cord.
11
15
The power switch is not set to the on position.
Set the power switch to [ | ] (On).
The main power source has been interrupted during opera-
tion such as by a power outage (blackout), etc.
Please turn the power off, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please turn the power on again.
15
Power does not
come on
Either there is no lamp and/or lamp cover, or either of these
has not been properly fixed.
Please turn the power off, and allow the unit to cool down at
least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of the
lamp and lamp cover, and then turn the power on again.
35, 36
8, 9
The signal cables are not correctly connected.
Correctly connect the connection cables.
Neither sounds
nor pictures are
outputted.
Signal source does not correctly work.
Correctly set up the signal source device by referring to the
manual of the source device.
-
The input changeover settings are mismatched.
Select the input signal, and correct the settings.
16
(This table is continued to the following page.)
ViewSonic PJ1165
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Phenomena That May Easily Be Mistaken For Machine Defects (continued)
Reference
page(s)
Phenomenon
Cases not involving a machine defect
The signal cables are not correctly connected.
Correctly connect the connection cables.
8, 9
The volume is adjusted to an extremely low level.
Adjust the VOLUME to a higher level.
19, 32
19
Pictures are dis-
played, but no
sounds are
heard.
The sound is muted.
Press the MUTE button to restore the sound.
The audio input is not correctly selected when the child
window is displayed.
Correctly select the audio input.
22
The lens cap is attached.
4, 15
8, 9
23
Remove the lens cap.
The signal cables are not correctly connected.
Correctly connect the connection cables.
Sounds are
heard, but no
pictures are
displayed.
The brightness is adjusted to an extremely low level.
Adjust the BRIGHT to a higher level using the menu function.
The screen is blanked.
Press the BLANK button to return to the input signal screen.
19
Colors have a
faded-out
appearance, or
color tone is poor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR BAL R,
COLOR BAL G, COLOR BAL B, COLOR and/or TINT settings,
using the menu functions.
24
23
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust the BRIGHT and/or CONTRAST settings to a higher
level using the menu function.
Pictures appear
dark.
The WHISPER function is working.
Select the NOR MAL to the item WHISPER in the MAIN menu.
23
The lamp is approaching the end of its product lifetime.
Replace the lamp.
35, 36
Either the focus and/or horizontal phase settings are not
properly.
16
Adjust the focus using the focus buttons, and/or H PHASE using
the menu function.
Pictures appear
blurry.
The lens is dirty or misty.
38
16
Clean the lens by referring to the section “Caring For The Lens”.
Input signal
changes with no
operation.
The INPUT dial is set between the click points.
Turn the INPUT dial and set it at a click point.
ViewSonic PJ1165
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NOTE
• This specifications are subject to change without notice.
Item
Product name
Panel size
Specification
Liquid crystal projector
2.5 cm (0.99 type)
Liquid crys-
tal panel
Drive system
Pixels
TFT active matrix
786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=1.7~2.4 f=30.5~45.8 mm
310 W UHB
Lens
Lamp
Speaker
1.0W + 1.0W (Stereo)
Power supply
Power consumption
Temperature range
Size
AC100 ~ 120V, 5.2A / AC220 ~ 240V, 2.2A
470 W
0°C ~ 35°C (Operating)
420(W) x 150(H) x 310(D) mm (not including protruding parts)
•
Please refer to the figure of the section “TECHNICAL” of the end of
this manual.
Weight (mass)
7.7kg
RGB Input Ports
RGB
M1-D
BNC (R,G,B,H,V)
VIDEO Input Ports
VIDEO IN
RGB output port
RGB OUT
Audio output port
AUDIO OUT
Control port
CONTROL
Ports
S-VIDEO
Other ports
NETWORK
REMOTE CONTROL
DC OUT
COMPONENT
(CR/PR, CB/PB, Y)
AUDIO Input Ports
AUDIO IN 1
AUDIO IN 2
AUDIO IN R/L
Lamp
PRJ-RLC-011
Optional
Air filter
Parts
•
•
Please call ViewSonic for the part number.
Please consult your dealer.
Others
ViewSonic PJ1165
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Country/Region Web site
T = Telephone
F = FAX
Email
United States
Canada
viewsonic.com/support
T: (800) 688-6688
F: (909) 468-1202
viewsonic.com/support
viewsoniceurope.com
viewsoniceurope.com
T: (800) 688-6688
F: (909) 468-1202
United Kingdom
T: 0800 833 648
F: (01293) 643910
Europe, Middle East,
Baltic countries, and
North Africa
Contact your reseller
Australia and New
Zealand
viewsonic.com.au
viewsonic.com.sg
viewsonic.com/asia
viewsonic.com.tw
viewsonic.com.tw
viewsonic.com.cn
T: +61 2 9906 6277
F: +61 2 9906 6377
Singapore/India and
Southeast Asia
T: 65 6273 4018
F: 65 6273 1566
South Africa
T: 886 2 2246 3456
F: 886 2 8242 3668
Other Asia/ Pacific
countries
T: 886 2 2246 3456
F: 886 2 8242 3668
Taiwan
China
T: (0800) 061 198
F: +886(2) 8242-3668
T: (800) 820-3870
F: (021) 623 75373
ViewSonic PJ1165
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC Projector
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a
product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished
parts or components.
How long the warranty is effective:
ViewSonic projectors are warranted for three (3) years for all parts excluding the lamp, three (3) years for all labor, and
one (1) year for the lamp from the date of the first consumer purchase.
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp only.
All accessory lamps purchased separately are warranted for 90 days.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow
instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your
product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a
description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION
CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT.
VIEWSONIC’s SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON
INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS
OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some
states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic
or your local ViewSonic dealer.
Projector Warranty (V3.0)
Release Date: May 1, 2002
ViewSonic PJ1165
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Power Cord Safety Guidelines
Caution: Use a power cable that is properly grounded. Always use an AC power cord that meets your
country’s safety standard.
USA...............................UL
Canada......................... CSA
Germany....................... VDE
Switzerland ...................SEV
Britain............................BASE/BS
Japan............................Electric Appliance Control Act
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG
SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue:
Brown:
Neutral
Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is
marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter
N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug
which is marked with the letter L or coloured RED.
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet CEE-22 requirements and may look like (Figure A1 below):
Figure 1
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT cord sets may be used. The cord set must
be selected according to the current rating for your unit. Please consult the table below for the selection
criteria for power cords used in the United States and Canada.
Figure 2
Cord Type
Size of Conductors in Cord
Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is
HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner
conductors.
If you have any questions concerning which proper power cord to use, please consult with the dealer from
whom you have purchased the product.
ViewSonic PJ1165
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information for U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this device.
Instructions to Users
This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that
the following condition is met. Use the cables which are included with the projector or specified.
Compliance Information for Canada
Notice: This class B digital apparatus complies with Canada ICES-003.
AVIS: Cet appeil numerique de la Classe B conforme a la norme NMB-003 du Canada.
Compliance Information for European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/
31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as
amended by 93/68/EEC Art.13 with regard to “Safety.”
User Information for all Countries
NOTICE: Use the cables which are included with the projector or specified.
ViewSonic PJ1165
50
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|