®
ViewSonic
- User Guide
NMP-640
Commercial Media Player
Model No.: VS13920
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Do not use the equipment near water.
Wipe the machine with a soft and dry cloth.
Do not block any vent holes. Please install the product in accordance with the manufacturer’s
instructions.
1.
2.
3.
Do not use the product on your legs for a long time because it gets hot and you may be burned.
Please avoid installing the product in a place where the temperature is above 40°C or lower than
0°C, or in a place that is moist or wet.
4.
5.
Protect the power cord plug, outlet, and connections to other equipment from damage by trapping
and squeezing.
6.
Please only use devices and accessories specified by the manufacturer.
The unit is hot pluggable. However it is recommended that the power be turned off before the
memory card is inserted or removed.
7.
8.
Do not remove the memory card during data access. The data may be lost and the product could be
damaged.
9.
Disconnect the power cord if the product will not be used for an extended period.
Do not repair, disassemble, or modify the product. Only qualified ViewSonic personnel should
check and repair any damage to the machine.
10.
11.
The unauthorized playing of certain audio or image files may infringe the related copyright laws
under certain circumstances.
12.
Do not adjust the volume to a high level, or the sounds may distort and become unpleasant.
When you view pictures for an extended period of time your eyes may become fatigued.
Careful attention should always be paid when moving the digital media player.
Make sure the place where the digital media player is placed is clean and dry.
If there is smoke, a strange smell or an abnormal noise, immediately turn off the digital media
player and contact your dealer or ViewSonic.
13.
14.
15.
16.
17.
ViewSonic NMP-640
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
Cadmium (Cd)
0.1%
0.01%
0.1%
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic NMP-640
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Copyright Information
©
Copyright ViewSonic Corporation, 2011. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
NMP-640
ViewSonic Commercial Media Player
Model Number:
VS13920
Document Number:
NMP-640_UG_ENG Rev. 1A 12-30-10
Serial Number:
Purchase Date:
____________________________________
____________________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
ViewSonic NMP-640
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1 Introducing the NMP-640
Left/Right side View ............................................................................................
Front Side View ..................................................................................................
Top Side View ....................................................................................................
Back Side View ..................................................................................................
Bottom View .......................................................................................................
2
2
3
3
3
Chapter 2 Connecting Peripherals
Placement of the NMP-640 Network Media Player
On the Desk .................................................................................................
Mounted to the back of a display .................................................................
Connection of NMP-640
5
5
Connecting the NMP-640 to a monitor ........................................................
Connecting USB Devices ............................................................................
Connecting the network cable .....................................................................
Connecting the power cord ..........................................................................
7
7
7
8
Chapter 3 BIOS Setup
11
MainMenu.........................................................................................................
Advanced Menu ...............................................................................................
Boot Menu .......................................................................................................
Security Menu ..................................................................................................
Exit Menu .........................................................................................................
12
13
13
14
Chapter 4Windows 7 Hard Disk Recovery Solution
About recovery partition ....................................................................................
Plan A ..............................................................................................................
Plan B ..............................................................................................................
Appendix- Frequently Asked Questions.............................................................
Appendix- Trouble Shooting ..............................................................................
15
16
18
23
23
Chapter 5 Other Information
Customer Support ............................................................................................
24
25
Limited Warranty ..............................................................................................
NMP-640
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introducing the NMP-640
The NMP-640 Network Media Player is a compact and easy to use desktop. It features all the
standard PC capabilities but with a slim body design which enables you to do spreadsheets,
create documents, watch online content and browse the internet in a smarter and greener way.
This chapter introduces NMP-640:
· Left/Right side View
· Front Side View
· Top Side View
· Back Side View
· Bottom View
NMP-640
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The NMP-640 features all the desktop capabilities but with a slim body design which enables
you to browse the internet in a relaxed and comfortable way.
1-1 Left/Right side View
150.00mm
1-2 Front Side View
Description
No. Name
1
2
3
SYS LED
HDD LED
Power Button
Indicates system status
Indicates hard disk status
Turns the power on/off
NMP-640
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3 Top Side View
Description
No. Name
1
2
3
4
Microphone in Port
Headphone out Port
USB2.0/e-SATA Combo
Connects to a microphone
Connects to headphones
Connects USB2.0 or e-SATA devices
Multi-Function Card Reader Support SD/MS/MS pro/MMC memory cards
1-4 Back Side View
Description
No. Name
1
2
3
4
5
6
7
Air vent
For cooling system to let air flow in side the chassis
Anti-theft lock
Kensington Lock
HDMI Port
Connects to HDMI audio and video
Connects to USB 2.0 devices
Connects to VGA display devices
Standard RJ-45 network port
Connects to the power adapter
USB 2.0 Port
D-Sub Port
Network Port
Power Input Port
1-5 Bottom View
NMP-640
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Connecting Peripherals
In this chapter, the placement and the connection of some necessary peripherals will
be introduced.
This chapter includes the following information:
· Placement of the NMP-640 Network Media Player
· Connections of the NMP-640
NMP-640
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2-1 Placement of the NMP-640 Network Media Player
1. On the Desk
Seat the unit in the desktop stand as shown to the right.
2. Mounted to the back of a display
This is the best space-saving way.
1.Use four screws(M4*10, round head) to fasten the VESA mounting bracket to the back of
the display.
NMP-640
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Fit the NMP-640 into the bracket with the power button located at the top for easy access.
3.Install top bar on the bracket.
NMP-640
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2ConnectionofNMP-640
1. Connecting the NMP-640 to a monitor
Connect to the monitor thru the VGA connector.
2．Connecting USB Devices
Connect USB devices using the USB ports on the top or back, for example, mouse and keyboard.
3．Connecting the network cable
Connect the LAN cable into the RJ-45 port with the other end connected to a hub or switch.
NMP-640
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4．Connecting the power cord
Connect the power adapter to the power input port of the NMP-640, and push the power button
to start it up.
NMP-640
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
BIOS Setup
This chapter provides a description of the BIOS setup utility. The BIOS setup menus and
available selections may vary from those of your product. For specific information on the BIOS
for your product, please contact ViewSonic ® .
The BIOS setup utility provides a built-in Setup program, which allows the user to modify the
basic system configuration and hardware parameters. The modified data will be stored in a
battery-backed CMOS, so that data will be retained even when the power is turned off. In
general, the information saved in the CMOS RAM will not need to be changed unless there is a
configuration change in the system, such as a hard drive replacement or when a device is added.
It is possible for the CMOS battery to fail, which will cause data loss in the CMOS only. If this
happens you will need to reconfigure your BIOS settings.
This chapter includes the following information:
· Main Menu
· Advanced Menu
· Boot Menu
· Security Menu
· Exit Menu
NMP-640
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MainMenu
The BIOS Setup is accessed by pressing the <DEL> button after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins. Once you enter the BIOS
Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System
Over-view information and allows you to set the System Time and Date. Use the “←” and “→”
cursor keys to navigate between menu screens.
►SystemTime
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to select
a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
►SystemDate
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
►SATA1/SATA2
While entering setup, BIOS auto detects the presence of SATA devices. This displays the status
of auto detection of SATA devices. Press [Enter] to see the detailed information of SATA device,
such as vendor, size, LBA mode and so on.
NMP-640
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Menu
►Quick Boot
If this item is set as Enabled, the system can be started within five seconds and some detection
items will be ignored. The options are [Disabled] and [Enabled].
►Quiet Boot
To start the system quietly. (Full Screen Log display can be shut down)
►Onboard LAN Controller[Enabled]
This item is used to enable or disable the Onboard LAN Controller.
►OnboardLANROM[Disabled]
This item is used to enable or disable the Onboard LAN ROM.
►RestoreonACPower Loss [Last State]
This item is used to set which state the PC will take with when it resumes after an AC power loss.
►ResumeBy RTC Alarm [Disabled]
This item is used to enable/disable RTC Alarm to generate a wake up. RTC is system real
time clock.
NMP-640
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Boot Menu
►BootDevicePriority
Press <Enter> to go to relative submenu.
►1stBoot Device
These items are used to specify the boot sequence from the available devices.
Security Menu
►ChangeSupervisorPassword
Select this item to set or change the supervisor password. The Supervisor Password item on top
of the screen displays the default Not Installed. After you have set a password, this item
displays Installed.
NMP-640
13
Download from Www.Somanuals.com. All Manuals Search And Download.
►ChangeUser Password
Select this item to set or change the user password. The User Password item on top of the
screen displays the default Not Installed. After you have set a password, this item displays
Installed.
►Clear User Password
Select this item to delete the user password.
Exit Menu
►Save Changes and Exit
Exit system setup after saving the changes. Once you are finished making your selections,
choose this option from the Exit menu to ensure the values you selected are saved to the
CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even
when the PC is turned off. When you select this option, a confirmation window appears. Select
[OK] to save changes and exit.
►DiscardChangesandExit
Exit system setup without saving any changes. Select this option only if you do not want to save
the changes that you made to the Setup program. If you made changes to fields other than
system date, system time, and password, the BIOS asks for a confirmation before exiting.
►DiscardChanges
Discards changes done so far to any of the setup values. This option allows you to discard the
selections you made and restore the previously saved values. After selecting this option, a
confirmation appears. Select [Yes] to discard any changes and load the previously saved values.
►LoadOptimalDefaults
The default value are the best settings of this motherboard. Always load the default value after
updating the BIOS or after clearing the CMOS values. Select this option and press Enter, it will
pop out a dialogue box to let you load the defaults. Select <OK> and then press <Enter> to load
the defaults. Select <Cancel> and press <Enter>, it will not load.
►LoadFailsafeDefaults
If you made changes to the BIOS and your system becomes unstable as a result, you can
change it back to default. However if you made many changes and don't know which one is
causing the problem, your best bet is to choose the option "Load Fail Safe Mode Defaults" from t
he BIOS menu. This uses a minimal performance setting, but the system would run in a stable
way. From the dialog box Choose "Y" followed by enter to load Fail-Safe Defaults.
NMP-640
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Windows 7 Hard Disk
Recovery Solution
This chapter introduces the Windows 7 recovery
· Using the recovery partition.
Recovery partition contains a factory installed operating system, drivers and other applications
of the image file. The recovery partition can quickly restore your computer to its original state, so
that your hard disk can operate in the best condition. Please backup your data files (such as
Outlook PST file) to the other disk before using the recovery partition.
About recovery partition
Recovery partition reserved space on your hard disk to restore the installed operating system,
drivers and other applications on your computer.
CAUTION! Do not delete "recovery partition" in hard disk, otherwise your system can not be
restored. If you encounter any problems during the recovery process, please bring your
computer to any of ViewSonic agent center or call Customer Service for assistance.
NMP-640
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Plan A — Advanced Startup Options：
1. Turn on the master computer.
2. Press F8 before Windows starts.
3. Choose “Repair Your Computer”.
Note: If Windows starts, you did not press F8 within the appropriate time allows. Shutdown the
computer and try again.
4. From the System Recovery Options dialog box, select a language and keyboard layout.
NMP-640
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select the user you created and enter your password.
6. Select Reinstall Windows.
NMP-640
17
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click the Yes button to start the reinstallation of Windows using the image you placed in the
recovery partition.
Plan B — Recovery Console:
1. On the master computer, remove the DVD-ROM and USB hard drive and start the computer.
2. Execute Sysprep with the OOBE option and restart the PC.
3. Start the destination computer and complete the Out of Box Experience (OOBE).
4. Press the Start Button and in the search input area, type "Recovery".
NMP-640
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. From the search results, launch the Recovery control applet.
6. Select the "Advanced recovery methods" option.
7. Select "Reinstall Windows" option.
NMP-640
19
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Follow the on-screen instructions if you want to back up your files. Then the computer
will restart.
NMP-640
20
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Verify that the computer starts in Windows RE.
10. From the System Recovery Options dialog box, select a language and keyboard layout.
NMP-640
21
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Click the Yes button to reinstall Windows using the image you placed in the recovery partition.
Note: By selecting Yes, Windows will begin the reinstallation of Windows using the recovery
image you created.
NMP-640
22
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Once the Windows Setup is complete, the PC will boot to OOBE. Complete Windows Welcome.
Note: If you create a backup prior to the restore, you'll have the option to restore the backup.
Note: Restore the system will not completely remove all data on the original disk, the system will
automatically save the user files to the “Windows.old” folder, this folder can be deleted after
confirmed useless.
Appendix-FrequentlyAskedQuestions
Q1: Is the HDD designed to be shock proof?
A1: Yes it is.
Q2: Can I add additional RAM?
A2: No you cannot.
Q3: Can the VGA share memory be adjusted in BIOS?
A3: No it cannot.
Q4: How do I change the Boot Device from HDD to another bootable device?
A4: When seeing POST message, press “F12” to enter boot menu then to select the bootable device
you plugged in.
Q5: What if I cannot connect to the internet via WLAN?
A5: Connect the antenna and confirm whether the wireless LAN function is enabled or not.
Q6: What if the SD card reader is not working normally?
A6: Confirm the SD Card is in one of the multi supported formats. (SD/MS/MSPro/MMC) Also check
that the SD card is inserted with the gold pins down.
Appendix-TroubleShooting
1. System would not power on or power off by pressing power button.
1.1. Check all power connections.
1.2. Make sure the DC plug is inserted correctly. If the power LED does not light you may have a
faulty power adapter.
1.3. If the power button does not function you may have a faulty button.
1.4. If you can press the power button in but the it does not light, you may have a faulty power button.
1.5. If the power LED stays lit and the system will not power down after holding the power button
in for more than 4 seconds you may have a faulty power button.
2. No sound from headphones.
2.1. Check the headphone cable connection — Ensure that the headphone cable is securely
inserted into the headphone connector.
2.2. Adjust the windows volume control — Click or double-click the volume icon in the lower-right
corner of your screen. Ensure that the volume is turned up and that the sound is not muted.
NMP-640
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/
Region
T=Telephone
F=Fax
Web Site
E-mail
Australia/New
Zealand
AUS=1800 880 818
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Canada
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 11 9999
com/uk/
www.viewsoniceurope.com/uk/ service_ie@viewsoniceurope.
Ireland (Eire)
support/call-desk/
com
Korea
T= 080 333 2131
Latin America
(Argentina)
T= 0800-4441185
T=1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America
(Chile)
Latin America
(Columbia)
Latin America
(Mexico)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Latin America
(Peru)
T= 0800-54565
Macau
T= 853 2870 0303
Middle East
ap.viewsonic.com/me/
Contact your reseller
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico &
Virgin Islands
Singapore/
Malaysia/
Thailand
T= 65 6461 6044
South Africa
ap.viewsonic.com/za/
Contact your reseller
United
www.viewsoniceurope.com/uk/ service_gb@
Kingdom
com/uk/
support/call-desk/
viewsoniceurope.com
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
ViewSonic NMP-640
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Limited Warranty
VIEWSONIC Media Player
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Media Player are warranted for 1 year for labor from the date of the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a.
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by ViewSonic.
Causes external to the product, such as electric power fluctuations or failure.
Use of supplies or parts not meeting ViewSonic’s specifications.
Normal wear and tear.
b.
c.
d.
e.
f.
Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
refer to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4.3: ViewSonic MP Warranty
MP_LW01 Rev. 1A 06-25-09
ViewSonic NMP-640
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|