®
ViewSonic
VT2300LED
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found
using the Regional selection box in the upper right corner of our website. “Antes
de operar su equipo lea cuidadosamente las instrucciones en este manual”
®
Model No. : VS13215-1M
ViewSonic
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the
precautions below. Do not install the outdoor antenna
system in near of overhead power lines or other
electric light or power circuits, or where it can come in
contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME CARE SHOULD BE TAKEN
TO KEEP FROM CONTACTING SUCH POWER
LINES OR CIRCUITS AS CONTACT WITH THEM
IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so that it can
provide some protection against voltage surges and
built-up static charges.
Section 810 of the National Electrical Code (NEC) in
the U.S.A. and Section 54 of the Canadian Electrical
Code in Canada provides information with in regard to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANS/NFPA 70
Antenna
Ground clamp
Antenna discharge
Electric service
unit
equipment
Ground clamps
Grounding conductors
Power service grounding
electrode system
NEC: National Electrical Code
CLEANING
Cleaning the AC power plug
Unplug the AC power plug and clean
it regularly. If the plug is covered with
dust and gathers moisture, its insulation
may deteriorate and result in a fire.
Cleaning the screen surface/
cabinet of the TV set
When cleaning this TV, unplug the
AC power cord. If not, it may result
in electric shock. Use a dry soft cloth
to clean the cabinet of the TV. To remove dust form
the screen, wipe it gently with a soft cloth. Stubborn
stains may be removed with a cloth slightly dampened
with a solution of mild soap and warm water. Never
use strong solvents such as thinner or benzine for
cleaning. If using a chemically pretreated cloth, please
follow the instruction provided on the package. The
ventilation holes can accumulate dust over time. To
ensure proper ventilation, we recommend you to
remove the dust periodically (once a month) using a
vacuum cleaner, while the LCD TV is powered off.
ViewSonic
ii
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear ViewSonic customer,
Congratulations on your purchase of a ViewSonic LCD TV display. For maximum benefit of
your TV, please read these instructions before any operations.
or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775.
To purchase or inquire about any accessories and installation services for your TV, please visit
Important! Please save the original box and all packing material for future shipping needs.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
For Your Records
Product Name:
Model Number:
[ ] VT2300LED
ViewSonic LCD TV
[ ] VS13215-1M
Document Number: VT2300LED-1M_UG_ENG Rev. 1A 01-01-10
Serial Number:
Purchase Date:
____________________________________________
____________________________________________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide
information about proper disposal.
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/Region
Web Site
Telephone
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-1202
United States
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-1202
Canada
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
ViewSonic
iii
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:
Name, address, of manufacturer and importers:
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,
Col. San Fernando Huixquilucan, Estado de México
Tel: (55) 3605-1099
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004
Hermosillo:
Villahermosa:
Distribuciones y Servicios Computacionales SA de CV.
Calle Juarez 284 local 2
Col. Bugambilias C.P: 83140
Tel: 01-66-22-14-9005
Compumantenimietnos Garantizados, S.A. de C.V.
AV. GREGORIO MENDEZ #1504
COL, FLORIDA C.P. 86040
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09
E-Mail: [email protected]
E-Mail: [email protected]
Puebla, Pue. (Matriz):
RENTA Y DATOS, S.A. DE C.V. Domicilio:
29 SUR 721 COL. LA PAZ
72160 PUEBLA, PUE.
Tel: 01(52).222.891.55.77 CON 10 LINEAS
E-Mail: [email protected]
Veracruz, Ver.:
CONEXION Y DESARROLLO, S.A DE C.V. Av.
Americas # 419
ENTRE PINZÓN Y ALVARADO
Fracc. Reforma C.P. 91919
Tel: 01-22-91-00-31-67
E-Mail: [email protected]
Chihuahua
Cuernavaca
Soluciones Globales en Computación
C. Magisterio # 3321 Col. Magisterial
Chihuahua, Chih.
Tel: 4136954
E-Mail: [email protected]
Compusupport de Cuernavaca SA de CV
Francisco Leyva # 178 Col. Miguel Hidalgo
C.P. 62040, Cuernavaca Morelos
Tel: 01 777 3180579 / 01 777 3124014
E-Mail: [email protected]
Distrito Federal:
QPLUS, S.A. de C.V.
Av. Coyoacán 931
Col. Del Valle 03100, México, D.F.
Tel: 01(52)55-50-00-27-35
E-Mail : [email protected]
Guadalajara, Jal.:
SERVICRECE, S.A. de C.V.
Av. Niños Héroes # 2281
Col. Arcos Sur, Sector Juárez
44170, Guadalajara, Jalisco
Tel: 01(52)33-36-15-15-43
E-Mail: [email protected]
Guerrero Acapulco
Monterrey:
Global Product Services
Mar Caribe # 1987, Esquina con Golfo Pérsico
Fracc. Bernardo Reyes, CP 64280
Monterrey N.L. México
GS Computación (Grupo Sesicomp)
Progreso #6-A, Colo Centro
39300 Acapulco, Guerrero
Tel: 744-48-32627
Tel: 8129-5103
E-Mail: [email protected]
MERIDA:
ELECTROSER
Av Reforma No. 403Gx39 y 41
Mérida, Yucatán, México CP97000
Tel: (52) 999-925-1916
E-Mail: [email protected]
Oaxaca, Oax.:
CENTRO DE DISTRIBUCION Y
SERVICIO, S.A. de C.V.
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca
Tel: 01(52)95-15-15-22-22
Fax: 01(52)95-15-13-67-00
E-Mail. [email protected]
Tijuana:
STD
FOR USA SUPPORT:
ViewSonic Corporation
Av Ferrocarril Sonora #3780 L-C
Col 20 de Noviembre
Tijuana, Mexico
381 Brea Canyon Road, Walnut, CA. 91789 USA
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);
Fax: 1-800-685-7276
4.3: ViewSonic Mexico Limited Warranty
ViewSonic
iv
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Please use the following ViewSonic LCD TVs only with the following wall-mount kit.
ViewSonic LCD TV Model No.
VT2300LED
ViewSonic Wall-Mount
WMK-10
kit model
Use with other Wall-Mount kit may cause instability and possibly result in injury.
service team: United States 1-800-688-6688, Canada 1-866-463-4775.
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency
(EPA). As an ENERGY STAR® partner, ViewSonic Corporation has determined that this
product meets the ENERGY STAR® guidelines for energy efficiency.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
ViewSonic
v
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the
Warning:
party responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.
ENERGY STAR Information:
• Keeping the TV at its factory default settings that meet ENERGY STAR criteria.
• Enabling certain features and functionality of LCD TV will increase its energy
consumption, possibly beyond the limits required for ENERGY STAR qualification.
ViewSonic
vi
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC
of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
0.1%
Cadmium (Cd)
Hexavalent Chromium (Cr6+)
0.01%
0.1%
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
0.1%
0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic
vii
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
i
Important Safety Instructions .......................................................................
Product Registration.......................................................................................iii
Customer Support...........................................................................................iii
Caution.............................................................................................................iv
Copyright Information..................................................................................... v
Compliance Information ................................................................................. vi
Declaration of RoHS Compliance.................................................................. vii
Getting Started
Package Contents........................................................................................... 2
Disconnecting the Stand ................................................................................ 2
Disconnecting the Stand................................................................................ 2
Mounting ViewSonic LCD TV to the wall ....................................................... 3
Front View and Right View of the Product.................................................... 4
Rear View and Left View of the Product........................................................ 5
Connecting the LCD TV .................................................................................. 7
Using the TV Features
Remote Control and TV Controls................................................................... 9
Inserting Remote Control Batteries................................................................ 9
Remote Control and TV Controls................................................................... 9
Programming your Cable or Satellite Box remote........................................ 10
Setup Wizard.................................................................................................. 11
Operation ...................................................................................................... 12
Other Information
Troubleshooting ............................................................................................ 21
Specifications................................................................................................ 22
Limited Warranty........................................................................................... 23
Mexico Limited Warranty.............................................................................. 24
ViewSonic
1
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Package Contents
Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.
• LCD TV
• Remote Control with batteries
• Power Cord
• ViewSonic User Guide
• ViewSonic Quick Start Guide
Disconnecting the Stand
Disconnecting the Stand
Figure 2
Figure 3
Figure 1
Figure 4
Figure 5
Figure 6
1. Lay the TV flat on a table with the LCD screen face down. To prevent the TV
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Loosen the screw on the bottom of the stand, and then disassemble the
base part of the stand. (see Figure1 and 2)
3. Press on the top edge of hinge cover and pull it down to disassemble the cover. (see Figure 3)
4. Remove the 4 screws on the hinge, then pull up the stand slowly. (see Figure 4 and 5)
5. Then, you shall successfully uninstall the stand. (see Figure 6)
Caution
Please use the following ViewSonic LCD TVs only with the following wall-mount kit.
ViewSonic LCD TV Model No.
VT2300LED
ViewSonic Wall-Mount kit model
WMK-10
Use with other Wall-Mount kit may cause instability and possibly result in injury.
service
team: United States 1-800-688-6688, Canada 1-866-463-4775.
ViewSonic
2
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the
product to the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to first remove the
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
• Before installing the LCD TV on the wall, ensure you have recorded the product serial
number on page (i) of the User Guide, as you will need the serial number to request
service should there be a service need.
• Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may damage the
power supply causing the unit to fail. The wall-mount screw type is M4 x L10.
• Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your LCD
TV to allow adequate cooling during operation.
• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.
Enjoy your ViewSonic LCD TV!
VT2300LED
ViewSonic
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front View and Right View of the Product
1
2
3
4
5
6
7
Item
1
Description
•
Power LED Indicator
/ Remote Control
Receiver
The LED lights up in blue when the TV is turned on.
Lights up in orange when the TV is in standby mode.
Receives IR signals from the remote control.
•
Power ON/OFF button Turn the power on from standby mode or turn the power
off to return to the standby mode.
Volume Down
Volume Up
CH Down
CH Up
Decrease sound volume or adjust a highlighted control
while in OSD menu.
2
3
4
5
Increase sound volume or adjust a highlighted control
while in OSD menu.
Channel down when source is TV, or select a control while
in OSD menu.
Channel up when source is TV, or select a control while in
OSD menu.
6
7
MENU
INPUT
Turn OSD menu ON/OFF.
Select input source.
ViewSonic
4
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Rear View and Left View of the Product
9
10
Y
Pb
Pr
L
11
R
12
13
1
2
7
RF
5
6
HDMI 2
HDMI 1
PC IN
VIDEO
S-VIDEO
AUDIO
R
AUDIO
L
VGA
3
4
8
Item
1
Description
Power (AC input)
Plug-in the supplied AC Power cord and connect to the
AC input power source.
2
HDMI Input Terminal
1/2
Connect this port to the HDMI/HDMI-DVI jack of the
compatible equipment.
ViewSonic
5
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Item
Description
3
VGA signal input
Connect a 15-pin D-sub RGB cable to the RGB output of
your computer and the other end to the RGB input on the
rear of the LCD TV.
4
PC Audio input
Connect the RGB (or DVI connection while using an
adapter cable) Audio Out on your computer to this Audio
input on the rear of the LCD TV.
TV Input Jack
S-Video input
Connect this jack to your Cable or VHF/UHF antenna.
5
6
Connect the S-Video cable from the compatible device to
this connector on the left panel of the LCD TV.
Composite Video
input
Connect this jack to the composite video output
connectors on your A/V equipment.
7
8
AV/ S-Video Audio
input (left/ right)
Connect the Audio in cable for AV/ S-Video from this jack
to the corresponding connectors on your A/V device.
HDMI Input Terminal 3 Connect this port to the HDMI/HDMI-DVI jack of the
9
compatible equipment.
Service
Service
10
11
12
13
YPbPr signal input
Connect this jack to the YPbPr output of A/V device.
Connect this jack to the SPDIF input of A/V device.
SPDIF Out
Headphone Jack
Connect to your headphones. By connecting the
headphones, you can listen to the sound from the TV on
headphones.
*If you connect the headphones, the TV speakers will be
muted.
VT2300LED
ViewSonic
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the LCD TV
Digital cable box
Blu-ray Disk Player / PS3
Personal Computer
Digital satellice receiver
DVD Player
RF
Audio System
VHF/UFH
Cable
AC power
socket
HDMI 2
HDMI 1
PC IN
S-VIDEO
VIDEO
R
DVD Player /
VCD Player /
Game System
AUDIO
AUDIO
L
VGA
Personal Computer
DVD Player /
VCD Player /
Game System
ViewSonic
7
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Digital cable box
Blu-ray Disk Player / PS3
Personal Computer
Digital satellice receiver
DVD Player
Service
Audio System
Y
Pb
Pr
L
DVD Player /
VCD Player /
Game System
R
Amplifier
Headphone
☼
• Please refer to the Quick Start Guide (supplied) when connecting the other equipment to
your LCD TV.
ViewSonic
8
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
Caution
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may
pose a risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may
result in leakage, which may pose a risk of fire or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the batteries.
Remote Control and TV Controls
Buttons located at the bottom of the LCD TV will operate the same as these buttons on the
remote control.
11
1
2
3
4
5
6
12
13
14
7
15
16
17
18
SRS
8
9
19
20
10
11
1
20
7
14
VT2300LED
ViewSonic
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Button
Description
1
2
3
4
5
INPUT
Input source select
0~9, -/100 number buttons Directly channel select
LAST
CC
Return to previous channel
Turn On/Off Closed Caption displaying
CH_LIST
Turn On/Off Channel List menu; press ▲/▼ while menu
on for channel selection
6
7
MUTE
Volume mute ON/OFF
+ VOL -
Adjust volume UP/DOWN; function adjust while OSD
menu On
8
SRS
Toggle SRS mode between SRS TruSround HD and Off
Hotkey for sound mode select
Display current information
9
S.MOD
INFO
10
11
12
13
14
POWER
P.MOD
WIDE
Power ON/OFF
Hotkey for picture mode select
Adjust window size
+ CH -
Adjust Channel UP/DOWN; move the cursor in OSD
menu while menu On
15
FAV.CH
Select from preset Favorite Channels; select Favorite
Channels which are added in Channel menu by user
16
17
SLEEP
MTS
Set timer to turn off TV
Select MONO, STEREO, or SAP sound for analogue
TV programs, or select audio soundtracks for digital TV
programs
18
19
OK
Confirm selection
▲▼◄ ► buttons
Move the cursor in OSD menu: UP/ DOWN for OSD
function select and LEFT/ RIGHT for function adjust;
while only a right-arrow icon ( ) displays on the option
of the OSD menu, press ► to enter the next level menu
20
MENU
Display OSD (On Screen Display) menu; return to the
upper level menu while in OSD menu; turn off OSD
menu while cursor in main items
Programming your Cable or Satellite Box remote
Refer the user manual from your service provider to determine the setting.
If it requires:
• 3 digits, please try “566”, “565”, “556”, or “688”. It usually works with DISHNetwork.
• 4 digits, please try “0054”. It usually works with Cox.
• 5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.
ViewSonic
10
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Setup Wizard
If you are the first time to turn on the TV, the Setup Wizard will launch to guide you through
the required configuration.
Selecting Language
1. In Menu language, press ◄ / ► to select the desired
Setup Wizard
language listed on the screen.
2. Press ▼ to highlight Go to next step and press ► to enter
Please select your prefer language:
Menu Language
English
Go to next step:
the next step.
TV
MENU
NTER
Setting up Time
1. In Time Zone, press ◄ / ► to select the correct time zone
of your location.
2. Press ▼ to select Daylight Saving Time, and press ◄ / ►
to enable/disable this feature.
Setup Wizard
Select the time zone & Daylight saving time:
Time Zone
Pacific
Off
Daylight Saving Time
Time Format
12-hour
Go to next step:
3. Press ▼ to select Time Format, and press ◄ / ► to select
“12-hour” or “24-hour”.
4. Press ▼ to highlight Go to next step and press ► to enter
the next step.
TV
MENU
ENTER
Selecting Antenna
1. In Air/Cable, press ◄ / ► to select “Cable” or “Air” as
your antenna setting.
2. Press ▼ to highlight Go to next step and press ► to enter
the next step.
Setup Wizard
Select the antenna type then auto scan:
Air/Cable
Cable
Go to next step:
TV
MENU
NTER
Auto Scan
1. The Setup Wizard starts searching the channels
automatically. The search result will be displayed on the
screen.
2. When Auto Scan is completed, the TV will show the first
channel of the search result.
Setup Wizard
RF CH
Found
Analog
Digital
:
:
:
:
11
9
9
0
TV
MENU
ENTER
ViewSonic
11
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Operation
Storing Channels into Memory
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Channel” menu, and then
press ► to enter.
3. Press ▲ or ▼ to select “Air/Cable” and use ◄ or ► to
select the antenna connection to “Air” or “Cable”. Air: RF
signal programs by “Air”. Cable: RF signal programs by
“Cable”.
Channel
Air/Cable
Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
11.3
WXIASD2
Bad
NTER
MENU
4. Press ▲ or ▼ to select “Auto Scan”, and then press ► to
enter.
Channel
5. Press ▲ or ▼ to select “Scan all channels”, “Digital
channel only”, or “Analog channel only” and press ► to
perform Auto Scan function.
Scan all channels
Digital channel only
Analog channel only
To stop scanning, press MENU at any time.
6. The Auto Scan screen will be shown, and after it is done,
the screen will return to the first found channel.
TV
MENU
NTER
Channel
RF CH :
1
0
0
0
Found :
Analog :
Digital :
NTER
MENU
Viewing the Menus
1. Press the MENU button to display the OSD main menu.
There are six top menus on the screen: Picture, Audio,
Time, Setup, Lock, and Channel.
2. Press ▲ or ▼ to select your desired top menu.
3. Press ► to enter the menu you select.
4. Use ▲ or ▼ to select the control you want to adjust.
5. When selecting the control with ►, press ► to enter next
level menu or enable the function. (► will only appear
when the control is highlighted)
Picture
Picture Mode
Dynamic
Contrast
65
Brightness
Sharpness
Tint
45
55
50
55
Color
Color Mode
Zoom Mode
Noise Reduction
Normal
Full
Middle
ENTER
MENU
6. Press ◄ or ► to adjust or select the settings.
7. Press MENU to exit from the OSD menu.
ViewSonic
12
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Selecting the Input Source
INPUT SOURCE
TV
To select the TV or other external input sources connected to
the TV:
AV
S-Video
Component
1.
Press the INPUT buttom on remote control or keypad.
HDMI1
HDMI2
HDMI3
PC
2. Press ▲ or ▼ to select the required input source between
TV, AV , S-Video, Component , HDMI 1/2/3, or PC.
3. To confirm the selection, press OK; or wait a while Input
menu displaying time out.
Favorite Channel Setting
To set your favorite channel into memory:
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Channel” menu, and then
press ► to enter.
3. Press ▲ or ▼ to select “Favorite”, then press ► button to
enter “Favorite” setting.
Channel
Air/Cable
Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
8
Good
4. Press ◄ or ► to select channel pages.
5. Press ▲ or ▼ to select the channel you’d like to be your
favorite channel. Press OK to confirm your selection.
6. To cancel the selection, press OK again on the selected
channel.
ENTER
MENU
Channel
Channel No.
Channel Name
Favorite
8
65
7. Press MENU to exit.
* To view your favorite channels, press the FAV.CH button
to show Favorite List and select your favorite channels that
have already been stored.
TV
MENU
NTER
Adding/Erasing Channel
When the channel is erased, it will not appear on the screen
when you browse the channels with ▼CH▲ button. To see
the channel again, you must add the channel or perform the
“Auto Scan” (page 11) function again.
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Channel” menu, and then
press ► to enter.
Channel
Air/Cable
Cable
11.3
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
WXIASD2
Bad
ENTER
MENU
3. Press ▲ or ▼ to select “Show/Hide”, then press ► button
to enter “Show/Hide” setting.
Channel
4. Press ▲ or ▼ to select the channel you want to Show/
Hide, and check or uncheck it with OK button.
5. Press MENU to return back to previous menu in Channel.
No.
Channel Name
Show/Hide
2
3
4
5
6
7
8
9
9
9
9
9
9
9
9
9
NTER
MENU
ViewSonic
13
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Channel Name Setting
To edit a name for the current channel:
Channel
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Channel” menu, and then
press ► to enter.
3. Press ▲ or ▼ to select “Channel No.”, then press ◄ or ►
to select the channel you want to edit the name.
4. Press ▲ or ▼ to select “Channel Label”, then press ► to
enter “Channel Label” setting.
Air/Cable
Cable
65
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Good
NTER
MENU
5. Use ▲ or ▼ to choose letters or signs, ◄ or ► to move
forward or backward.
Channel
6. After you input the channel name, press MENU or OK to
complete the setting.
7. Press MENU to return back to previous menu in Channel.
NTER
MENU
Settings up Picture Options
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Picture” menu, and then press
► to enter.
3. Press ▲ or ▼ to select the control of “Picture Mode”,
“Contrast”, “Brightness”, “Sharpness”, “Tint”, “Color”,
“Color Mode”, “Zoom Mode”, “Noise Reduction”, and
then press ◄ or ► to adjust the level.
Picture
Picture Mode
Dynamic
Contrast
65
Brightness
Sharpness
Tint
45
55
50
55
Color
Color Mode
Zoom Mode
Noise Reduction
Normal
Full
Middle
TV
MENU
ENTER
4. Press MENU to return back to previous menu in Picture.
Settings up Audio Options
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Audio” menu, and then press
► to enter.
Audio
Equalizer
Standard
Balance
50
50
50
ƒƒ
ƒƒ
Treble
Bass
ƒƒ
3. Press ▲ or ▼ to select the control of “Equalizer”,
“Balance”, “Treble”, “Bass”, “Audio Language” (in DTV
mode), “SPDIF Type”, “Surround Sound”, “AVL”, and
then press ◄ or ► to select your desired option.
4. Press MENU to return back to top menu.
Audio Language
SPDIF Type
Surround Sound
AVL
English
RAW
Off
On
ENTER
MENU
Configuring System Setting
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Setup” menu, and then press
► to enter.
3. Press ▲ or ▼ to select the control of “Menu Language”,
“Transparent”, “OSD Time Out”, “Closed Caption”,
“Restore Default”, “Input Label”, “DCR”, “Backlight” and
then press ◄ or ► to select your desired option.
4. Press MENU to return back to top menu.
Setup
Menu Language
Transparent
OSD Time Out
Closed Caption
Restore Default
Input Label
DCR
English
25%
15 Sec.
Off
Backlight
100
ENTER
MENU
ViewSonic
14
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Setting up Time menu
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Time” menu, and then press
► to enter.
Time
Sleep Timer
Off
Pacific
Off
Time Zone
Daylight Saving Time
Time Format
Auto Sync
12-hour
On
3. Press ▲ or ▼ to select “Sleep Timer”, and press ◄ or ►
to set the “Sleep Timer” from 5~240 min, or Off.
4. Press ▲ or ▼ to select “Time Zone”, and select the correct
time zone of your area with ◄ or ►. The displayed time
of “Clock” will be changed at the same time automatically.
To adjust “Clock”, select “Clock” and press ►. Use ◄ or
► to change between year/ month/ date/ hour/ minute, ▲
or ▼ to adjust. When you finish adjustment, select “OK”
and press OK to complete the setting.
Clock
----/--/-- --:--
----/--/-- --:--
Wake Up
NTER
MENU
Time
Clock
2009
/
5
/
14
8
:
26 PM
* The “Clock” time can only be adjusted manually when
“Auto Sync” is set to “Off”.
OK
CANCEL
5. Press ▲ or ▼ to select “Daylight Saving Time”, and select
On or Off with ◄ or ► according to the time zone of your
area. The “Clock” time will change automatically.
6. Press ▲ or ▼ to select “Time Format”, and ◄ or ► to
select 12-hour or 24-hour.
TV
MENU
NTER
7. Press MENU to return back to top menu.
Closed Caption Setting
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Setup” menu, and then press
► to enter.
3. Press ▲ or ▼ to select “Closed Caption”, then press ►
button to enter “Closed Caption” setting.
4. Press ▲ or ▼ to select “CC Mode”, “Basic Selection”,
or “Advanced Selection”, and use ◄ or ► to make your
choice.
Setup
Menu Language
Transparent
OSD Time Out
Closed Caption
Restore Default
Input Label
DCR
English
25%
15 Sec.
Off
Backlight
100
NTER
MENU
Basic Selection: To set basic analog closed caption
options. (CC1~CC4, TEXT1~TEXT4, Off)
Advanced Selection: To select closed caption signal
formats and set up caption modes for digital TV channels.
(Service1~6, Off)
ViewSonic
15
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
For detailed Close Caption setting:
1. Press ▲ or ▼ to select “Option”, and then press ► to
enter “Option” setting.
2. Press ◄ or ► to select the Mode to be “Custom”, and then
use ▲ or ▼ to select desired options and use ◄ or ► to
adjust detailed settings.
Setup
CC Mode
CC Off
CC1
Basic Selection
Advanced Selection
Option
Off
* When you select the Mode to be “Default”, you can not
adjust the detailed settings and those parameters would
be set according to broadcast cantent.
NTER
MENU
Setup
CC Mode
CC Off
CC1
Basic Selection
Advanced Selection
Option
Off
TV
MENU
NTER
Setup
Mode
Default
Default
Default
Default
Default
Default
Default
Default
Default
Font Style
Font Size
Font Edge Style
Font Edge Color
FG Color
BG Color
FG Opacity
BG Opacity
ENTER
MENU
Using the Parental Controls
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Lock” menu, and then press
► to enter.
Lock
Enter Password
----
3. In the “Enter Password” field, enter the password. (The
default password is 0000.)
4. Move to “System Lock”, and select “On” to enable the
detailed settings.
TV
MENU
NTER
5. Move to “US” or “Canada” rating system.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
Off
Canada
RRT Setting
Reset RRT
ENTER
MENU
ViewSonic
16
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
US: Press ► to set TV or MPAA ratings.
(1) TV
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
Off
1. Press ▲ or ▼ to select “TV”, and then press ► to
enter “TV” rating system setting.
The following screen will allow you to customize the
following TV ratings:
Canada
RRT Setting
Reset RRT
Y (all children)
NTER
MENU
Y7 (older children)
G (general audience)
PG (guidance suggested)
Lock
TV
MPAA
14 (strongly cautioned)
MA (mature audience)
You can also customize the TV ratings for the
following content:
ALL (All types content)
TV
MENU
ENTER
FV (fantasy violence)
V (violence)
S (sexual situations)
L (adult language)
D (sexsual dialog)
2. Press OK to set or reset each area.
3. Press MENU to exit.
(2) MPAA
Lock
1. Press ▲ or ▼ to select “MPAA”, and then press ► to
enter “MPAA” rating system setting.
2. Press ▲ or ▼ to select your desired MPAA ratings
level.
TV RATING
ALL FV
V
S
L
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-HA
The MPAA ratings level are defined as following:
G (general audience)
:Blcok
NTER
MENU
PG (parental guidance suggested)
PG-13 (recommended for children 14 years of age or
older)
R (mature audience)
NC-17 (no one under 17 years of age)
X (adult audience only)
Lock
G
PG
Unlock
Unlock
Unlock
Unlock
Unlock
Unlock
PG-13
R
NC-17
X
N/A
N/A (not applicable)
3. Press MENU to exit.
TV
MENU
ENTER
Canada: Press ► to set Canadian English and French ratings.
(1) Canadian English
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
Off
1. Press ▲ or ▼ to select “Canada Eng”.
2. Press ► to enter.
3. Press ▲ or ▼ to select your desired Canadian English
rating level.
Canada
RRT Setting
Reset RRT
The Canadian English rating levels are defined as
following:
NTER
MENU
ViewSonic
17
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
C (children)
Lock
Canada Eng
C8+ (children eight years and older)
G (general programming, suitable for all audiences)
PG (parental guidance)
Canada Fre
14+ (viewers and older)
18+ (adult programming)
EXEMPT (exempt)
NTER
MENU
4. Press MENU to exit.
(2) Canadian French
Lock
1. Press ▲ or ▼ to select “Canada Fre”.
2. Press ► to enter.
C
CB+
G
Unlock
Unlock
Unlock
Unlock
Unlock
Unlock
PG
3. Press ▲ or ▼ to select your desired Canadian French
rating level.
14+
18+
EXEMPT
The Canadian French rating levels are defined as
following:
NTER
MENU
G (genenral)
8ans+ (children eight years and older)
13ans+ (not appropriate for children of less than 13
years)
16ans+ (not appropriate for children of less than 16
years)
Lock
G
Unlock
Unlock
Unlock
Unlock
Unlock
8ans+
13ans+
16ans+
18ans+
EXEMPT
18ans+ (reserved to adults)
EXEMPT (exempt)
TV
MENU
NTER
4. Press MENU to exit.
To Block Unrated Movie or TV Programs
1. Press ▲ or ▼ to select “Unrated Lock”, and then press ◄
or ► to select “On” or “Off”. When “On” is selected all
programs that are not rated will be blocked.
2. Press MENU to exit.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
On
Canada
RRT Setting
Reset RRT
TV
MENU
NTER
To Set Rating Region Table
RRT Setting defines the rating standard for a particular
geographic region and/or country.
1. Press ▲ or ▼ to select “RRT Setting”, and then press ►
to enter RRT setting.
2. Select each adjustable setting with ▲ or ▼, then press ◄
or ► to select the sub-selection.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
Off
Canada
RRT Setting
Reset RRT
3. Press MENU to exit.
NTER
MENU
* The picture here only shows an example of the content of
RRT Setting. However, the selections and sub-selections
of RRT Setting may be different in your OSD menu
according to the local broadcasting system.
* To reset RRT setting, move to “Reset RRT”, and press ►
to reset.
ViewSonic
18
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
To Change Password
1. Press ▲ or ▼ to select “Change Password”, and then press
► to enter “Change Password” setting.
2. Move to “Enter Old Password”, and then enter the old
password with number keys.
3. Enter your new password on “Enter New Password”.
4. Enter your new password again on “Confirm Password”.
After you complete the last step, the screen will return to
the top page of “Lock” menu. If so, the password has been
changed successfully.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
Off
Off
Canada
RRT Setting
Reset RRT
NTER
ENTER
NTER
MENU
Lock
Enter Old Password
Enter New Password
Confirm Password
----
----
----
MENU
To block by Input Source
1. Press ▲ or ▼ to select “Input Block”, and then press ► to
enter.
2. Press ▲ or ▼ to select the input source, then ◄ or ► to
select from “Block” or “UnBlock”.
3. Press MENU to exit.
Lock
Change Password
System Lock
Unrated Lock
Input Block
US
On
On
Canada
RRT Setting
Reset RRT
MENU
Lock
TV
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
UnBlock
AV
S-Video
Component
HDMI
PC
TV
MENU
NTER
To Restore Factory Setting
1. Press the MENU button to display the OSD main menu.
2. Press ▲ or ▼ to select the “Setup” menu, and then press
► to enter.
3. Press ▲ or ▼ to select “Restore Default”, and then press
► to restore the factory default setting.
Setup
Menu Language
Transparent
OSD Time Out
Closed Caption
Restore Default
Input Label
DCR
English
25%
15 Sec.
Off
Backlight
100
4. Select “Yes” and press OK to confirm the setting (Restore
Factory Setting won’t reset program data, for in case need
to get latest program data, please execute Auto Scan in
Channel menu again).
NTER
MENU
5. Press MENU to exit.
ViewSonic
19
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Using PC Function
1. When in PC source, press the MENU button to display the
OSD main menu.
2. Press ▲ or ▼ to select the “Picture” menu, and then press
► to enter.
Picture
Picture Mode
Standard
Normal
Contrast
50
50
50
Brightness
Sharpness
Color Mode
Advanced
3. Press ▲ or ▼ to select your desired controls, and press ◄
or ► to adjust.
Zoom Mode
Noise Reduction
Full
Off
4. For advanced PC functions, select “Advanced” (only in PC
source) and press ► to enter.
ENTER
MENU
5. Press ▲ or ▼ to select “Auto” (Auto adjustment), “H-Pos”
(H-Position), “V-Pos” (V-Position), “Clock” or “Phase”,
and adjust the level with ◄ or ►.
* When in PC source, the other menus are the same as or
similar to when in other source.
* When there is no signal in the PC mode, “No Signal” will
be displayed on the screen and the TV will automatically
turn into power-saving mode after a few seconds’ idleness.
Input the PC signal or press POWER button on remote or
keypad and the TV will return to VGA mode.
ViewSonic
20
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
Please contact ViewSonic service team directly if you have questions, service needs, or require
technical assistance related on the use of your television.
Contact ViewSonic Service Team at:
Or call our service team:
United States 1-800-688-6688
Canada
1-866-463-4775
Problem
Possible Solution
No power
• Make sure the power cord is properly connected to the LCD TV AC power socket.
• Make sure the AC power cord is properly connected to the wall outlet.
• Make sure the DC power button is ON (Blue LED).
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
No picture
• The TV station may be experiencing problems. Try another channel.
• The Cable TV signal may be scrambled or encoded. Please contact your local cable
operator.
• Make sure that connection to other components are correct referring to the user guide.
• Make sure that setup has been done correctly after connections.
• Make sure the correct input is selected and the input signal is compatible.
Strange color,
• Ensure that the video cable is securely connected.
light color, or color • The picture may appear dim in a brightly lit room.
misalignment
• Adjust brightness, contrast, saturation (color), and tint referring to the user guide.
• Check the input signal setting.
No sound
• Check your audio connections are properly connected referring to the user guide.
• The MUTE button may have been pressed, try pressing this button again.
• Check your audio settings, your TV audio may be set to minimum.
• Press the Volume + (Up) button on the remote control.
Remote control
unit does not
operate
• Make sure the directions of batteries are inserted correctly referring to the user guide.
• Batteries could be weak or dead. Replace with new batteries.
• Is a fluorescent light illuminated near the remote control sensor?
• The path of the remote control beam may be blocked. Make sure the path is clear and
that the remote control is aimed at the remote control sensor on the TV.
• Press the POWER button on the remote control to see if you can turn on the TV.
•
•
Press MENU button on the remote control to see if there is a MENU shown on the screen.
Press only one button at a time and it is the correct one for the operation you want to perform.
Unit cannot be
operated
• External influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TV and the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
Power is cut off
suddenly
• Is the sleep timer set in advance?
• Is there no signal in PC mode or HDMI mode?
• The internal temperature of the unit has increased. Remove any objects blocking the
vent or clean as necessary.
No CATV
• Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE
referring to the user guide.
• CATV is connected improperly or not connected; please check all the CATV
connections.
reception (or no
reception above
CH13)
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut
off/with sidebar
screen
• Is the image positioned correctly?
• Are screen mode adjustments such as picture size set correctly?
• Press WIDE button repeatedly on the remote control to see if you can get the picture
you prefer.
ViewSonic
21
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Model
VT2300LED
Type
23” TFT Active Matrix RGB
0.2652mm (H) x 0.2652mm (V) pixel
LCD
Color Filter
Glass surface
RGB
R,G,B vertical stripe
Anti-Glare
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-80 kHz, fv:50-75 Hz
Input signal
RF
TV system Antenna / NTSC+ATSC, TV cable system /
CATV+Digital cable
Video
Audio
1 composite RCA, 1 S-Video, 1 YPbPr component, 3 HDMI
1 mini-stereo,
2 pair of RCA (L/R) stereo
PC
Up to 1920 x 1080 @ 60 Hz, VGA mode
Compatibility
Resolution
Recommended
and supported
(VGA mode)
1920 x 1080 @ 60 Hz
1680 x 1050 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 768 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
5W x 2 @ THD=10%
Speaker Output
Audio Output
Power
1 Headphone jack, 1 SPDIF RCA
110 VAC, 50/60 Hz
Voltage
Full Scan
509.184mm (H) x 286.416 mm (V)
20.0 inch (H) x 11.3 inch (V)
Display area
Temperature
Humidity
Altitude
32°F to + 104°F ( 0°C to + 40°C)
10% to 65% (no condensation)
0 foot to +6560 foot (2000m) above sea level
Operating
conditions
Temperature
Humidity
Altitude
-4°F to + 140°F (-20°C to + 60°C)
0% to 90% (no condensation)
0 foot to 3945 foot (12,000m) above sea level
Storage
condition
Physical
565.0 x 418.1 x 191.3 mm
Dimensions
(W) x (H) x (D) 22.24 x16.46 x 7.53 inch
Net
4.5 kg
Weight
UL/cUL, FCC-B (Doc-B), BETS-7, ENERGY STAR®
Regulations
On
Stand by
< 50 W [Max] (blue LED)
< 1 W @ 115 Vac only (orange LED)
Power
consumption
Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
Warning:
permanent damage to the LCD TV.
Product Specifications are subject to change without notice.
Note:
ViewSonic
22
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Limited Warranty
VIEWSONIC LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its
sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components.
How long the warranty is effective:
ViewSonic LCD TVs are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the
first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure
to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer
Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states
do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so
the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic
or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.
Warranty Information.
ViewSonic
23
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Mexico Limited Warranty
VIEWSONIC LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its
sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or
refurbished parts or components & accessories.
How long the warranty is effective:
ViewSonic LCD TVs are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the
first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,
unauthorized attempted repair, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Causes external to the product, such as electrical power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed
on the product for an extended period of time.
4. Removal, installation, insurance, and set-up service charges.
How to get service:
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached
Customer Support page). You will need to provide your product’s serial number, so please record the product information in
the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your
warranty claim.
For Your Records
Product Name: ____________________________
Document Number: ________________________
Purchase Date: ____________________________
Model Number: _______________________________
Serial Number: ________________________________
Extended Warranty Purchase? ________________(Y/N)
If so, what date does warranty expire? ______________
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your
address, (d) a description of the problem, and (e) the serial number of the product.
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied
warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business
relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4. Repair or attempted repair by anyone not authorized by ViewSonic.
ViewSonic
24
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
is a trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from
two speakers, complete with rich bass, high frequency detail and clear dialog.
ViewSonic
25
VT2300LED
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic
Download from Www.Somanuals.com. All Manuals Search And Download.
|