®
ViewSonic
N3290w
N4290p
N4790p
User Guide
LCD TV
®
ViewSonic
Model No. : VS12280-1A
VS12281-1A
VS12282-1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Please use the following ViewSonic TVs only with the following wall-mount kit.
ViewSonic TV Model No.
N3290w
WMK-13
N4290p
N4790p
ViewSonic Wall-Mount
kit model
WMK-13
WMK-13
Use with other Wall-Mount kit may cause instability and possibly result in injury. To
find the perfect mount for N4290p/N4790p, please browse
Copyright Information
Copyright © ViewSonic® Corporation, 2008. All rights reserved.ViewSonic, the three
birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves
the right to change product specifications without notice. Information in this document
may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means,
for any purpose without prior written permission from ViewSonic Corporation.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
ii
ViewSonic
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
Warning: You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the
equipment as unsorted municipal waste, but use the return and collection
systems according to local law.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive
2002/95/EC of the European Parliament and the Council on restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS Directive)
and is deemed to comply with the maximum concentration values issued by the
EuropeanTechnical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
0.1%
0.01%
0.1%
0.1%
0.1%
<0.1%
<0.1%
Mercury (Hg)
Cadmium (Cd)
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Certain components of products as stated above are exempted under the Annex of
the RoHS Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other
lamps not specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and
electronic ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight
or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight,
aluminium containing up to 0.4% lead by weight and as a cooper alloy containing
up to 4% lead by weight.
iii
ViewSonic
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Product Registration.............................................................................................. i
Customer Support................................................................................................. 1
Caution................................................................................................................... ii
Copyright Information........................................................................................... ii
Compliance Information ...................................................................................... iii
Declaration of RoHS Compliance ....................................................................... iii
WARNING............................................................................................................... 1
Important Safety.................................................................................................... 2
Instructions............................................................................................................ 2
Getting Started.............................................................................................................. 7
List of Features ..................................................................................................... 7
Package Contents ................................................................................................. 7
Installing the LCD TV ............................................................................................ 8
Installing the Stand.........................................................................................................8
Disconnecting the Stand ..............................................................................................8
Mounting ViewSonic LCD TV to the wall.....................................................................9
Wall Mount Kit Specifications (VESA)....................................................................10
Front View of the Product................................................................................... 11
Rear View of the Product.................................................................................... 12
Side View of the Product .................................................................................... 13
Connecting the LCD TV ...................................................................................... 15
Cable System or VHF/UHF Antenna System ..............................................................15
Cable System and VHF/UHF Antenna System..........................................................15
HD Cable Box/HD Satellite Box................................................................................15
Personal Computer.......................................................................................................17
Other Equipment ........................................................................................................18
Using the TV Features ............................................................................................... 19
Remote Control and TV Controls....................................................................... 19
Inserting Remote Control Batteries .........................................................................19
Remote Control and TV Controls ................................................................................20
Operation ............................................................................................................. 23
On-Screen Display of TV menu...................................................................................25
Other Information....................................................................................................... 32
Cleaning the LCD TV........................................................................................... 32
Troubles Shooting............................................................................................... 33
Specifications...................................................................................................... 35
Limited Warranty ................................................................................................. 36
Index..................................................................................................................... 37
iv
ViewSonic
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
◊ If you will not be using the TV for a
long time, disconnect the power by
pulling the plug itself. Do not pull on
the cord.
◊ For details concerning safety
precautions, refer to “Important Safety
instructions” on page 2.
WARNING
Do not expose this TV to rain or
moisture. It may increase the risk to fire
or electronic shock.
Declaration of Conformity
Trade Name: ViewSonic
Model: N4290p/N4790p
Responsible Party: ViewSonic
Corporation Address: 381 Brea
Canyon Road, Walnut, CA. 91789
USA
Telephone Number: 1-800-688-6688
This device complies with part 15 of
the FCC rules. Operation is subject to
the following two conditions: 1) This
device may not cause harmful
interference, and 2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Installation
◊ The TV should be installed near an
easily accessible power outlet.
◊ To prevent internal heat buildup, do
not block the ventilation openings.
◊ Do not install the TV in a hot or
humid place, or in a place subject
to excessive dust or mechanical
vibration.
Dangerous Voltage: The
lightning
flash
with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user to
the presence dangerous
voltage within the inside of
the product that may be
sufficient level to constitute
a risk of electric shock to
persons.
◊ Avoid operating the TV at
temperatures below 41°F (5°C).
◊ When the TV is transported directly
form a cold to a warm location, or
if the room temperature changes
suddenly, the picture may be
blurred or show poor colour due to
moisture condensation. In this
case, please wait a few hours
before turning on the TV, in order
to let the moisture evaporate first.
◊ To ensure best picture quality, do not
expose the screen to direct
NOTIFICATION
This device has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of
the FCC Rules. limits are designed to
provide reasonable protection against
Instruction:
exclamation point within an
equilateral triangle is
The
harmful interference in
a
residential
installation. This device generates uses
and can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications.
intended to alert the user t
o the presence o f important
operating and servicing
illumination
or
sunlight.
We
recommend you use spot lighting
directed down from the ceiling or to
cover the windows that face the
screen with opaque curtains. It is
better that TV is installed where the
floor and walls are not of a reflective
material.
instructions
in
the
literature accompanying
the appliance.
However, there is no guarantee that
interference will not occur in
a
The TV shall not be exposed to
dripping or splashing. Do not put
objects filled with liquids, such as vases,
on the TV.
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
◊ Reorient or relocate the receiving
antenna.
◊ Increase the separation between the
device and receiver.
◊ Connect the device into an outlet
on a circuit different from that to
which the receiver is connected.
◊ Consult the dealer or an
experienced radio/TV technician
for help.
To Customers
To install the specified TV, sufficient
expertise is required .Make sure you
CAUTION
To prevent electric shock, do not use
this polarized AC plug with an
extension cord, receptacle or other
outlet unless the blades can b e fully
inserted to prevent blade exposure.
subcontract
ViewSonic
the
dealer
installation
or licensed
to
contractors and pay adequate
attention to safety during the
installation.
Note
This television includes
demodulator, which should allow you to
receive unscrambled digital cable
a
QAM
television
programming
via
Pursuant to FCC regulations, be
cautioned that any changes or
modifications not expressly approved
in this manual could void your
subscription service to a cable service
provider. The type of programming
and signal provided by your cable
service provider will affect the
availability of digital cable television
programming in your area.
authority to operate this equipment.
Safety
Trademark Information
Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are ttrademarks of
HDMI Licensing LLC.
◊ Operate the TV only on 120 – 240 V
AC.
◊ Use the AC power cord specified by
ViewSonic and suitable for the
voltage where you use it.
◊ The plug is designed, for safety
purposes, to fit into the wall outlet only
one way. If you are unable to insert
the plug fully into the outlet, contact
your dealer.
◊ If any liquid or solid object should fall
inside the cabinet, stop operating,
unplug the TV immediately and have it
check by qualified service technician.
Blue-ray Disc is a trademark.
Adobe is a registered trademark or a
trademark
of
Adobe
Systems
Incorporated in United States and/or
other countries.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
1
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
USE
AC power Cord
Important Safety
Instructions
1) Read these instructions completely before
using the equipment.
2) Keep these instructions in a safe place.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean with a soft, dry cloth.
7) Do not block any ventilation openings. Install
the equipment in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
Keep the following guidelines to protect the AC
power cord from being damaged. If the AV
power cord is damaged, it may result in a fire or
an electric shock. Stop using it and ask your
dealer or ViewSonic service center to exchange
it.
◊ Do not place the TV where the power cord is
subject to wear or abuse.
◊ Do not pinch, bend, or twist the cord
excessively. The core lines may be bared and
cut, causing a short-circuit, and resulting in a
fire or an electric shock.
◊ Do not convert or damage the power
cord.
stoves, or other devices (including
amplifiers) that produce heat.
◊ Avoid power cord being rolled
over or rested upon.
9) Do not attempt to circumvent the safety
provisions of the polarized or grounding-
type plug. A polarized plug has two blades
with one wider that the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade and the
third prong are provided for your safety. If
the provided plug does not fit into your
outlet, consult an electrician for replacement
of the outlet.
10) Prevent the power cord from being tread
upon or pinched, particularly at the plug,
convenience receptacles, and the point
where they exit from the device. Be sure
that the power outlet is located near the
equipment so that it is easily accessible.
11) Only use attachments/ accessories specified
by the manufacturer.
◊ When the power cord plugged in, do not move
theTV.
◊ Keep the power cord away from heat sources.
◊ When you disconnect the AC power cord,
disconnect it from the wall outletfirst.
◊ When disconnecting the power cord, grasp the
plug instead of pulling the power cord.
◊ Use only an original ViewSonic AC power
cord, not other brands.
◊ Do not use the supplied AC power cord on
any other equipment.
Wall outlet
The TV set with a three-wire grounding type
AC power cord plug must be
connected to an AC power socket
outlet with a protective grounding
connection.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
Do not use an unfitting outlet.
Insert the plug fully into the outlet. If it
is loose, do not use it. Doing so may cause arcing
and result in a fire.
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
Contact your electrician to change the outlet.
Wiring
13) Unplug this apparatus when it will be unused
for a long period of time.
For your safety, be sure to unplug the AC power
cord when connecting cables.
Take care not to trip on the cables. It may cause
damage to the TV set.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, or the unit does not operate
normally, or has been dropped.
Electric shock
Do not touch the AC power cord or the TV
with a wet hand. If you plug/unplug
the AC power cord from the TV with
a wet hand, it may cause electric
shock.
Lightning storms
During a lightning storm, unplug the TV from the
wall outlet and disconnect the antenna to revent
damage to the TV.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
2
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
When not in use
Antenna grounding according to the
National Electrical Code, ANS/NFPA 70
If you will not be using the TV set for long
periods of time, the TV set should be
disconnected from the AC power outlet to
prevent power line surges. The TV set is not
disconnected from the AC power source when
the TV set is switched off. To disconnect the
TV set completely unplug from the AC power
outlet.
Antenna
Ground clamp
Antenna discharge
unit
Electric service
equipment
unit
Overloading
This TV set is designed to operate on a
Ground clamps
120 - 240 V AC supply only. If there are
too many appliances connected to the
same AC power outlet, it could result in a
fire or an electric shock.
Grounding conductors
Power service grounding
electrode system
Optional equipment
NEC: National Electrical Code
If optional equipment is to be installed, leave
some space between optional equipment and
the TV set. Picture distortion and/or noisy
sound may occur if the TV set is positioned in
close proximity to any equipment emitting
electromagnetic radiation.
BATTERIES
◊ Do not cast away batteries in a fire.
◊ Do not disassembled, overheat, or short-circuit
the batteries.
◊ If battery replaced in the wrong way, it may
cause danger of explosion. Replace only with
the same or equivalent type.
Small accessories
Keep small accessories in as safe place where
children are unable to reach.
Dispose used batteries
To preserve our environment, dispose of
used batteries according to your local laws or
regulations.
ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the
precautions below. Do not install the outdoor
antenna system in near of overhead power
lines or other electric light or power circuits, or
where it can come in contact with such power
lines or circuits.
CLEANING
Cleaning the AC power plug
Unplug the AC power plug and clean
it regularly. If the plug is covered with
dust and gathers moisture, its
insulation may deteriorate and result
in a fire.
WHEN
ANTENNA
INSTALLING
SYSTEM,
AN
EXTREME
OUTDOOR
CARE
SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR
CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
Cleaning the screen surface/
cabinet of the TV set
When cleaning this TV, unplug the
AC power cord. If not, it may result
in electric shock. Use a dry soft cloth
Be sure the antenna system is grounded so that
it can provide some protection against voltage
surges and built-up static charges.
to clean the cabinet of the TV. To remove dust
form the screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with a solution of mild soap
and warm water. Never use strong solvents
such as thinner or benzine for cleaning. If using
a chemically pretreated cloth, please follow the
instruction provided on the package. The
ventilation holes can accumulate dust over time.
To ensure proper ventilation, we recommend
you to remove the dust periodically (once a
month) using a vacuum cleaner.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. and Section 54 of the
Canadian Electrical Code in Canada provides
information with in regard to proper grounding
of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements for
the grounding electrode.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
3
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
MAGNETIC INFLUENCE
Slots and openings in TV are provided for
ventilation. To ensure reliable operation of the TV
and to protect
it from overheating, be sure these openings are
not blocked or covered.
This TV contains a strong magnet in the
speaker unit that generates a magnetic field.
Keep any items susceptible to magnetic fields
away from the speaker.
The TV may accumulate dust and get dirty if
proper ventilation is not provided. For proper
ventilation, follow the following guidelines:
◊ Never install the TV face up, down or
sideways.
◊ Never install the TV turned over
or upside down.
◊ Never cover the slots and
SOUND
If you hear snapping or popping
sound comes from the TV
continuously or frequently while the
TV is operating, unplug the TV and
consult your
dealer or service technician. It is normal for
some TVs to make occasional snapping or
popping sounds, particularly when being turned
on or off.
openings with a cloth or other
materials.
◊Never block the slots and openings
by placing the TV on a bed, sofa,
rug or other similar surface.
◊ Never place the TV in a confined
space, such as a bookcase or built-
CARRYING THE TV
Carry the TV as instructed
To prvent dropping the TV and causing serious
injury, you must follow these guidelines:
◊ Disconnect all cables before carrying the TV.
◊ Carrying the large size TV requires at least
two or three people.
in
cabinet,
unless
proper
ventilation is provided.
Leave some space around the TV set as shown
below. Otherwise, air-circulation may be
inadequate and cause overheating, which may
cause a fire or damage to the TV set.
◊ When you carry the TV, place your hands as
illustrated and hold it securely. Do not put stress
on the LCD panel and the frame around the
screen.
Installed on the wall
11.875 inches
◊ When carrying the TV, do not subject it to
shocks, vibration, or excessive force.
◊ When lifting or moving the TV, hold it securely
from the bottom. Place your palm directly under
the panel.
(30.16 cm)
4 inches
(10 cm)
4 inches
(10 cm)
Leave at least this
space around the set.
4 inches
(10 cm)
Installed with stand
11.875 inches
(30.16 cm)
4 inches
(10 cm)
2.375 inches
(6.03 cm)
(10 cm)
Leave at least this space around the set.
Do not install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
4
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
◊ Do not hang anything on the TV. Do
children to climb on the TV.
not allow
Objects and ventilation holes
Never push any objects into the slots on the TV
cabinet as they may touch dangerous voltage
points or short out parts that could result in a fire
or an electric shock. Do not place any objects on
the TV.
Do not install the TV in places subject to extreme
temperature, such as in direct sunlight, near a
radiator, or heating vent. If the TV is exposed to
extreme temperature, the TV may overheat and
cause deformation of the enclosure or cause
malfunction. Do not install the TV in a place
exposed to direct air conditioning. If the TV is
installed in such a location, moisture may
condense inside and may cause a malfunction.
◊ Do not place the TV in hot, oily,
MOISTURE
Moisture and flammable objects
◊ Keep the product away from moisture. Do not
expose this appliance to rain or moisture. Do
not place objects filled with liquids, such as
vases, on the TV.
humid or excessively dusty places.
◊ Do not install the TV where
◊ Do not use power-line operated V sets near
water, such as in places like a bathtub,
washbowl, kitchen sink, laundry tub, a wet
basement, or near a swimming pool, etc. It may
cause fire or electric shock.
◊ Do not let this TV get wet. Never
spill liquid of any kind on the TV. If
water penetrates into the product,
unplug the power cord and contact
ViewSonic. Donot operate the TV. It
may result in electric shock or
insects may enter.
◊ Do not install the TV where it may be exposed
to mechanical vibration.
◊ Do not install the TV in a location where it may
spear up, such as on or behind a pillar, or where
you might bump your head on it. It may cause
injury.
Preventing the TV from toppling over
To prevent the TV from toppling over, secure the
TV to a wall or stand.
damage to the TV.
Placement for watching
◊ To prevent fire, keep flammable
objects or open flame (e.g. candles)
away from the TV.
We suggest you to watch the TV at a distance
of 3-7 times that of the screen height, and not
in excessive brightness. It is easy to cause eye
fatigue if you watch TV for too long or in a dark
room. To obtain clear picture, do not expose the
screen to direct illumination or sunlight. Use spot
lighting directed down from the ceiling if you can.
INSTALLATION
To do Wall mount installation, you need a Wall-
Mount Bracket. When installing or removing
the TV using the Wall-Mount Bracket, be sure
to use qualified contractors. If not properly
secured during installation or removal from the
Wall-Mount Bracket, the TV may fall and cause
serious injury.
Use in outdoor
This TV is not designed for
outdoors installation. Do not
expose the TV to rain, as it may
result in a fire or an electric shock.
Also, do not expose the TV to
direct sunlight, as it may heat up
and become damaged.
Optional wall mount
◊ When installing the TV using a Wall-Mount
Bracket, make sure you follow the operating
instructions supplied with the Wall-Mount
Bracket.
◊ Attach the brackets supplied with the Wall-
Mount Bracket.
Vehicle, ships and other vessels
Do not install this TV in a vehicle.
Car accidents may cause the TV to
fall down and cause injury.
◊ The TV is not designed for hanging from
the ceiling. It may fall and cause serious
injury.
Do not install this TV in a ship or
vessel. If the TV is exposed to
seawater, it may cause a fire or
damage the TV.
Placement
Medical institutions
Do not place this TV in a place where medical
equipment is in use.
It may cause the medical equipment to
malfunction.
The TV should be installed near an easily
accessible AC power outlet.
Observe the following to prevent the TV from
falling from the stand or wall mount.
◊ Place the TV on a stable, level
surface.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
5
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Broken pieces
VOLUME ADJUSTMENT
Do not throw anything at the TV.
Doing so may break the screen glass
and cause serious injury.
If the surface of the TV cracks, unplug
the AC power cord before touching the
TV. Otherwise electric shock may result.
◊ Adjust the volume to avoid disturbing your
neighbors. Sound carries easily at night.
Therefore, we suggest you close the windows
or use headphones.
◊ When using headphones, adjust the volume
to appropriate levels, or hearing damage may
result.
Handling of broken glass and liquid
crystal leakage
If the LCD panel gets damaged, crystalline liquid
leakage may occur, or scattered broken glass may
result. Do not touch broken glass or crystalline
liquid which is toxic, with bare hands as cuts,
poisoning or skin irritation may occur. Also do not
glass fragments or leaked crystalline liquid get
into your eyes or mouth. Should either contacted
your eyes or mouth, rinse the contacted area
thoroughly with water and consult your doctor.
LCD SCREEN
◊ Although the LCD screen is made with high-
precision technology and has effective
pixels of 99.99% or more, black dots or
bright points or light (red, blue, or green)
may appear constantly on the LCD screen.
This is a structural property of the LCD
panel and is not a malfunction.
◊ The LCD screen is made with high-precision
technology. To achieve a high level of
performance and picture quality, this TV’s
backlight setting is set to maximize the
brightness of the TV. However, uneven
brightness may be observed when the LCD TV
is viewed in a dark environment without an
input source or a blank screen. This is a normal
condition, not a malfunction of the TV. To
improve this condition, change the Picture
mode, Backlight setting, enable the Light
Sensor, or turn on the Power management.
◊ Avoid exposing the LCD screen surface to
direct sunlight. It is likely to damage the LCD
panel.
◊ Do not push or scratch the LCD screen, or place
objects on top of the TV. The image may be
uneven or the LCD panel may be damaged.
◊ If the TV is used in a cold place, a smear may
occur in the picture or the picture may become
dark. This does not indicate a failure. These
phenomena improve as the temperature rises.
◊ When still pictures are displayed continuously,
ghosting may occur. It should disappear after a
short period of time.
SERVICING
Do not attempt to repair the TV
yourself, since opening the cabinet
may expose you to dangerous
voltage or other hazards. Ask qualified service
personnel to do the servicing for your TV.
Replacement parts
When replacement parts are required, be sure
the service technician certifies in writing that
he/she has used replacement parts specified by
the manufacturer that have the same
characteristics
as
the
original
parts.
Unauthorized substitutions may cause a fire,
an electric shock or other hazards.
Safety check
Upon completion of repairs to the TV, ask the
service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the TV is safe for operating, and
to so certify. Ask a qualified service technician
to dispose of the TV.
For Customers in the United States
There is mercury in the lamp of this product.
Disposal of these materials may be regulated
due to environmental considerationsFor disposal
or recycling information, please contact your
local authorities or the Electronic Industries
Alliance (http//www. eiae.org).
◊ The screen and cabinet get warm when the TV
is in use. This is a normal condition.
◊ Spraying insect repellent with volatile material
on the screen will cause damage.
◊ Do not make prolonged contact with rubber
or plastic material.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
6
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
List of Features
1. Enjoy HDTV with 1920x1080 native image resolution. (32” -1366x768)
2. ClearPictureTM technology with 3D de-interlacing for precise video.
3. Built-in digital tuners (HDTV, PAL, DVB-T cable)
4. Displays multiple TV formats including 576i, 576p, 720p, 1080i, 1080p
5. Easy setup with multiple video inputs including HDMI(x4).
6. Convenient swivel base
Package Contents
Please make sure the following items are included with your LCD TV.
If any items are missing, please contact your dealer.
LCD TV
Remote Control
with batteries
Power Cord
ViewSonic User Guide
ViewSonic Quick Start Guide
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
7
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Installing the LCD TV
Installing the Stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Connect the stand with the hinge at the back of TV with screws.
3. Attach the base to the stand with screws.
Disconnecting the Stand
1. Place the TV face down on a soft cloth or cushion on a table.
2. Remove the base. It is attached to the stand with screws.
3. Remove the screws holding the stand to the hinge.
4. Remove the stand.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
8
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing
the product to the wall, please consider the following guidelines:
z
z
Read the Important Safety Instructions, at the start of this manual.
Do not install in a moist or wet environment. This equipment is intended for
indoor use.
z
z
Do not install near heat source, or strong magnetic fields
Use only ViewSonic approved wall-mounting brackets to support the LCD TV
weight
z
z
Before attaching the wall mount plate to the back cover, ensure the product is
working
If your LCD TV is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
z Disconnect the power and any other cables that might hinder moving the LCD TV.
z Set the LCD TV on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while
installing plate.
z Through the matching screw holes in the bracket, there are 4 or 6 screws
mounted on the backside of the LCD TV. Loosen all screws, and keep for future
use.
z Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may
damage the power supply causing the unit to fail. N3290w, N4290p and N4790p
wall-mount screw type is M6 x L10.
z Mount the wall mount bracket to the wall ensuring use of proper screws to
support the installation. Ensure there is at least 6cm of space surrounding any
air-vents of your LCD TV to allow adequate cooling during operation.
z Hang the LCD TV wall mount plate to the wall mount bracket, completing
installation. Enjoy your ViewSonic LCD TV
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
9
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
all Mount Kit Specifications (VESA)
W
When attaching to other building materials, please contact your nearest dealer.
C
D
N4290p
N3290w
N4790p
Product Family
inch
32
VESA Spec. (A x B) Standard Screw(C xD) Quantity
200 x 200 mm
M6 x L10
M6 x L10
M6 x L10
4
4
6
LCD TV
42
47
400 x 200 mm
(200+200) x 200 mm
z
z
z
ViewSonic provides the standard dimensions for wall mount kits as shown in the
table above
When purchasing our wall mount kit, a detailed install manual and all parts
necessary for assembly are provided.
Do not use the screws that longer than the standard dimension, as they may
cause damage
to the inside of the TV set.
Caution
Please use the following ViewSonic TVs only with the following wall-mount kit.
ViewSonic TV Model No.
N3290w
WMK-13
N4290p
N4790p
WMK-13
WMK-13
ViewSonic Wall-
Mount kit model
Use with other Wall-Mount kit may cause instability and possibly result in injury.
To find the perfect mount for N3290w/N4290p/N4790p, please browse
4775.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
10
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front View of the Product
Item
Description
1
2
Remote Control Receiver
Power LED Indicator
Receives IR signals from the remote control
Lights up in blue when the TV is turned on.
Lights up in red when the TV is in standby mode.
Turn the power on from standby mode or turn
the power off return to the standby mode.
Select input source.
Turn OSD menu ON/OFF.
Channel down when source is TV, or select a
control while in OSD menu.
3
Power ON/OFF button
4
5
6
SOURCE
MENU
PR ▼
7
8
9
PR ▲
VOL -
VOL +
Channel up when source is TV, or select a
control while in OSD menu.
Decrease sound volume or adjust a highlighted
control while in OSD menu.
Increase sound volume or adjust a highlighted
control while in OSD menu.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
11
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Rear View of the Product
Item
Description
1
Power (AC input)
Plug-in the supplied AC Power cord and connect to the
AC input power source.
2
HDMI Input
Connect this port to the HDMI/HDMI-DVI jack of the
compatible
equipment.
HDMI Audio (left/
right)
Connect the DVI Audio Out on your device to the
HDMI Audio on the rear of the LCD TV display. This
jack is used for DVI Audio.
3
4
Composite Video
input
Connect this jack to the composite video output
connectors on your A/V equipment.
Composite/ Audio
input (left/ right)
YPbPr signal input
YPbPr Audio input
(left/ right)
Digital audio out
TV Input Jack
Composite Video
output
Connect the Audio in cable for AV from this jack to the
corresponding connectors on your A/V device.
Connect this jack to the YPbPr output of A/V device.
Connect the Audio in cable for YPbPr from this jack to
the corresponding connectors on your A/V device.
Connect to a Digital Audio device.
Connect this jack to your Cable or VHF/UHF antenna.
Connect this jack to the composite video input
connectors on your A/V equipment.
5
6
7
8
9
10 Composite/ Audio
output (left/ right)
11 PC Audio input
Connect the Audio out cable for AV from this jack to the
corresponding connectors on your A/V device.
Connect the RGB Audio Out on your computer to the
RGB Audio on the rear of the LCD TV display. This
jack is used for PC Audio.
12 VGA signal input
Connect a 15-pin D-sub RGB cable to the RGB output
of your computer and the other end to the RGB input
on the rear of the LCD TV display.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
12
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Side View of the Product
Item
A
Description
Connect this port to the HDMI/HDMI-DVI jack of the
compatible
HDMI Input
equipment.
Connect the S-Video cable from the compatible device
to this
B
S-Video input
connector on the rear panel of the LCD TV
display
C
D
Composite Video
input
Composite/ S-Video
Audio input (left/
right)
Connect this jack to the composite video output
connectors on your A/V equipment.
Connect the Audio in cable for AV/ S-Video from this
jack to the corresponding connectors on your A/V
device
E
Headphone Jack
Connect to your headphones. By connecting the
headphones, you can listen to the sound from the TV
on headphones.
＊ If you connect the headphones, the TV speakers
will be muted
F
USB
Connect this jack to USB device.
Below files are available to read.
(JPEG, BMP, PNG, MPEG1, MPEG2, MPEG4, MP3, M4A)
AV connection
Connect the composite video and audio input jacks to the corresponding output jacks
of your A/V device.
--- VIDEO: Composite Video input [3] [C]
--- AUDIO: AV signal Audio input [4] [D]
S-Video connection
Connect the S-Video and audio input jacks to the corresponding output jacks of your
VCR or other video device that has S-Video. S-Video provides better picture quality
than composite video connection. If both are connected, S-Video signal has priority.
--- VIDEO: S-Video input [B]
--- AUDIO: S-Video signal Audio input [D]
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
13
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Component (YPbPr) connection
YPbPr provides better picture quality than the S-Video or the AV connection.
＊For YPbPr connection, connect the component video (YPbPr) and audio jacks
to the corresponding
output jacks of your A/V device.
--- VIDEO: YPbPr signal input [5]
--- AUDIO: YPbPr signal audio input [6]
HDMI connection
HDMI (High-Definition Multimedia Interface) is a licensable audio/video connector
interface for transmitting uncompressed, encrypted digital streams between this TV
and any HDMI- equipped audio/video equipment.
＊Be sure to use only an HDMI cable that bears the HDMI logo.
＊If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI 1 Input Terminal (with DVI-to-HDMI cable or adapter), and connect the Audio
cable to the VGA Audio in jacks.
HDMI cable
DVI-to-HDMI cable
DVI-to-HDMI adapter
Audio cable
1. With HDMI cable: HDMI Input Terminal [2] [A]
2. With HDMI-DVI cable --- VIDEO: HDMI 1/2/3 Input Terminal [2]
--- AUDIO: PC Audio input [11]
＊ Recommend to use HDMI1/2/3 to connect HDMI –DVI cable.
Computer connection
Connect the VGA cable and Audio cable from the VGA signal input and PC Audio
input to the corresponding ports on your A/V device.
--- VIDEO: VGA signal input [12]
--- AUDIO: PC Audio input [11]
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
14
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy the high-definition and standard-definition digital programming along with
standard- definition analog programming.
☼
• This TV is capable of receiving unscrambled digital programming for both cable
and external VHF/UHF antenna.
• We strongly recommend that you connect the antenna/cable input using a 75-ohm
coaxial cable (not supplied) to ensure the best picture quality.
Cable or VHF/UHF
75-ohm coaxial cable
Rear of TV
V
H
F/
UH
F/
C
AB
L
E
input
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and
antenna programming, as shown below.
A-B RF switch
Antenna
Rear of TV
V
H
F/
UH
F/
C
AB
L
E
input
☼
• Remember to set the TV/CATV setting in the TV menu to Air or Cable for the type
you choose.
HD Cable Box/HD Satellite Box
You can also enjoy high-definition programming by subscribing to a high-
definition cable service or a high-definition satellite service. For the optimum
picture quality, be sure to connect this device to your TV via the HDMI or
component video (with audio) input on the back of your LCD TV.
Contact ViewSonic service team at: http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818
ViewSonic
15
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
☼
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to
the HDMI 1/2/3 jack [10] and connect the audio jack to the AUDIO In jacks [11],
ViewSonic
16
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Personal Computer
Use the LCD TV as the monitor of your computer.
The picture below shows the connection for PC. The LCD TV can also be connected
to PC.
☼
z
z
Connect the PC IN jack to the PC using a 15-pin cable and audio cable.
If the PC is connected to TV and no signal has been input from PC for more
than 30 seconds, the TV will enter standby mode automatically.
PC Timing Reference Chart
Mode
Aspect Ratio Handling Compatiable
Standard
Resolution
FS*Full-Screen
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
RGB
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1360 x 768 @ 60Hz
1280 x 1024@ 60Hz
1920 x 1080R@ 60Hz
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
*.*
*.*
☼
• This TV’s PC VGA input does not support interlaced signals.
• For the best picture quality, we recommend that you use the signals (boldfaced)
in the above chart with a 60 Hz vertical frequency from a personal computer.
• Remark “*.*” excludes N3290w. Full screen is 1366 x 768 for N3290w.
ViewSonic
17
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Other Equipment
☼
• Please refer to the Quick Start Guide (supplied) when connecting the other
equipment to your LCD TV.
ViewSonic
18
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery
compartment.
3.
Reattach the battery cover.
CAUTION
z
z
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in creaking or leakage, which
may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in creaking or leakage, which may pose a risk of fire or
lead to personal injury.
z
z
z
z
Dispose of the battery in accordance with local laws and regulations.
Keep the batteries away from children or pets.
When the remote control will not to be used for an extended period, remove the
batteries.
ViewSonic
19
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Remote Control and TV Controls
Button
Description
1
Power
Press this button to turn the power on
from standby
mode. Press it again to
return to the standby mode.
2
3
4
Picture
Aspect
To Select a predefined picture setting.
Standard/ Vivid/ Personal/ Game/ Movie
Change the aspect ratio.
16:9/ Auto/ Widescreen/ 4:3/ Zoom
0~9, - number Press 0~9 and “-” to select a channel.
buttons
After you input the channel numbers,
press OK button to direct to the channel
immediately, or wait for 3 seconds to
change automatically.
5
EPG
Press to display the Electronic
Programme Guide (EPG). It contains the
programme information for the channel
you’re watching.
6
7
Menu
Press to turn the OSD (On-Screen
Display) menu on or turn off the OSD
menu.
Press these buttons to navigate the OSD
▲▼◀ ▶
buttons
menus. ▲▼◀ ▶ is for function select,
and is for function adjustment.
Press to switch signal sources.
Press repeatedly to set the off timer. The
function is used to automatically shut off
the LCD TV after a preset period of time
passed. There are several times for
choice –Off, 5 min, 10 min, 15 min, 30
min, 45 min, 60 min, 90 min, 120 min,
180 min, or 240min.
8
9
Source
Sleep
10 VOL+/-
11 Pr List
Press to adjust the volume.
Press to display a list of channels and
input sources.
12 COLOUR
BUTTONS
When functions attached to the colour
buttons are active or selected, the colour
buttons are shown on screen.
Press this button to activate Teletext with
TV.
13 MIX
14 Teletext
Press to turn on or turn off Teletext.
ViewSonic
20
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Button
Description
15 Subtitle
Press to select Off or On function of
subtitle, when the input source is
available for subtitle.
16 Index
Press to return to page 100 or the index
page; and then press 0 to 9. The teletext
page will be numbered and added to the
page you select or the secondary item.
To Select HDMI device.
Switch source between Component 1,
Component 2, AV 1, AV 2 (Side),
S-Video.
17 HDMI
18 Video
19 Mute
Press to turn off the sound. To restore
the sound, press this button again, or
press the VOL+ button.
20 Source
Press to display the INPUT source list
and select the source with PR +/- button.
To confirm the selection, press OK.
Press to return to previous program.
Press to exit the OSD (On-Screen
Display) menu.
21 Pre PR
22 Exit
23 Display
24 PR +/-
25 Dual
Press this button to display the current
state of the LCD TV.
Press to change the channels up or
down.
Select MONO, STEREO, DUAL 1, and
DUAL 2 for ATV channel. Select Audio
languages for DTV channel.
26 Size
Press to change the font size: Full
screen, Top half and Bottom half.
To select the subpage when the current
page contains subpage(s).
Press to stop the scrolling of pages. The
text decoder stops receiving data.
Reveal hidden information such as
answers to a quiz.
27 Subpage
28 Hold
29 Reveal
30 PC
31 TV
To select PC device.
To select TV device.
ViewSonic
21
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Button
Description
Use below buttons when you play music
or video file by USB device.
(JPEG, BMP, PNG, MPEG1, MPEG2,
MPEG4, MP3, M4A)
J
A
Forward / Quick forward
Search or select previous chapter or
track.
Backward / Slow backward
Search or select next chapter or track.
Play and pause
K
G
L
I F
B
C
D
E
F
Rotate
Thumbnail
Repeat
Zoom +/-
H
Rotate the photos.
Make the photos as thumbnail.
Repeat to play files. (Music or Video)
To enlarge or reduce the picture size.
Stop playing files.
G
ViewSonic
22
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Operation
TurningtheTVOnandOff
Press the POWER button on the remote control.
You can also use the Power button on the side of
the panel.
Selecting the TV Signal Source
With the TV on, press SOURCE button on either
the TV or the remote to choose from:
ATV, DTV, HDMI 1, HDMI 2, HDMI 3, HDMI 4
(Side), Component 1, Component 2, AV 1, AV 2
(Side), S-Video, PC, USB.
ChangingChannels
1. Using Channel List
Press Pr List to show all channels.
Press ST buttons to select channels. You will
see all channels that have been memorized.
Channels erased or not memorized will not be
shown.
2. Using PR +/-
The TV changes channels in sequence.
3. Using number buttons
For ATV, directly press number buttons to select
channels.
＊
Return to the previous channel, press
Pre PR button.
AdjustingtheVolume
Press Vol+/- button to adjust volume.
To turn off the volume, press Mute button.
To restore volume, press Mute button again, or
pressVol+/- button directly.
ViewingtheDisplayedInformation
To display the current information of the LCD TV:
Press Display button, and the current state will
be displayed on the screen. (It shows all or some
of the information about Input, Channel,
Resolution, Audio Type, etc., depending on what
input source it is in)
ViewSonic
23
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Setting the sleep timer
The sleep timer lets you select the amount of time
before your TV turns off automatically.
Press SLEEP button repeatedly to select a sleep
timer function on the remote control. You can select:
Off, 10 min, 30 min, 60 min, 90 min, 120 min, 180
min, or 240min.
To turn off the timer, please select Off.
Viewing Subtitle
To view Subtitle:
Press Subtitle button repeatedly to select. You can
select:
•On
•Off
ViewSonic
24
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
On-Screen Display of TV menu
ViewingtheMenus
1. Press the MENU button to display the OSD
main menu. There are six main menus on the
screen: CHANNEL, PICTURE, SOUND, TIME,
OPTION and LOCK.
2. Press ▲▼ to select your desired menu.
3. Press OK or ► to enter the menu you select.
4. Use ▲▼ to select the control you want to adjust.
5. When selecting the control with ► to enter next
level menu or enable the function.
6. Press ◄► to adjust or select the settings.
7.
Press Exit to exit from the OSD menu.
StoringChannelsintoMemory
1. Press the MENU button to display the OSD
main menu.
2. Press ▲▼ to select the “CHANNEL” menu.
3. Use ▲▼ to select the settings.
4. Press OK or ► to confirm.
z Auto Tuning
Install DTV and ATV channels.
z DTV Manual Tuning
Search and install DTV channels one by one.
z ATV Manual Tuning
Search and install ATV channels one by one.
− Storage To: Save the channel to your
preferred location.
− Current CH: Switch the channel at present one.
− Search: Search the channel one by one.
− Fine-Tune: Fine tune the channel.
− Skip: Don’t save the present searched channel.
z Programme Edit
Use the color button to Delete, Rename, Move,
or Skip channels in the Progarmme list.
ViewSonic
25
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Adjusting Picture Settings
1. Press the MENU button to display the OSD
main menu.
2. Press ▲▼ to select the “PICTURE” menu.
3. Press ► to enter the sub-menu and
use ▲▼ to select the settings.
4. Press ◄► to adjust the settings.
5. Press OK to confirm.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
z Picture Mode: Select your desired setting.
Standard, Vivid, Personal, Game, Movie.
Every setting has different control authority to
adjust Contrast, Brightness, Colour,
Sharpness or Tint.
z Contrast
z Brightness
z Colour
z Sharpness
z Tint
z Colour Temperature: There are 3 options of
Colour Temperature: Normal (balanced),
Warm (redder), Cool (bluer).
z Aspect Ratio: You can select different picture
ratio of 16:9, Auto, Widescreen, 4:3 and
Zoom. For PC input source, please use Auto
to adjust.
z Noise Reduction: Filter out and reduce the
image noise and improve picture quality.
z Auto Screen: It is only available in PC mode.
z Power Saver: Lower the power consumption.
z DCR: (Dynamic Contrast Ratio)
Enhance contrast in the darker and the brighter
picture areas as the image on the screen
changes.
z HDMI Overscan: When you watch TV by HDMI
input source, you could use this function to
enlarge the picture. Video content may be
clipped of screen boarding.
ViewSonic
26
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Adjusting Sound Settings
1. Press the MENU button to display the OSD
main menu.
2. Press ▲ or▼ to select the “SOUND” menu.
3. Press ► to enter the sub-menu, and use ▲▼ to
select the settings.
4. Press ◄► to adjust the settings.
5. Press OK or ► to confirm.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
z Sound Mode: Select your desired setting.
Standard, Music, Movie, Sport, User.
Every setting has different control authority to
adjust Treble, Bass, or Balance.
z Treble: To adjust audio setting parameters of
treble.
z Balance: To adjust the balance between
left/right channels.
z Auto Volume: To eliminate the volume
differences between channels and programs
and also reduce the dynamics of sound.
z Surround: To add greater depth and dimension
to the TV sound.
ViewSonic
27
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
TIME
1. Press the MENU button to display the OSD
main menu.
2. Press ▲ or▼ to select the “TIME” menu.
3. Press ► to enter the sub-menu, and use ▲▼ to
select the settings.
4. Press ◄► to adjust the settings.
5. Press OK or ► to confirm.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
z Clock: If you have DTV, the Clock will
consistent with the input source.
Only in the ATV mode, user can set the
clock by pressing ▲▼. (hour/minute/AM or
PM)
z Off Time: Set the time for TV off in the range of
24 hours.
− Repeat: Select On or Off to activate the
function and adjust the Hour or Minute. When
the On is selected, the TV will turn off
automatically very day.
− Hour
− Minute
z On Time: Set the time for TV on in the range of
24 hours.
− Activate: Select On or Off to activate the
function.
− Hour
− Minute
− Volume: Adjust the volume when TV on.
− Mode: Select the input source of TV or DTV.
z Sleep Timer: Let you select the amount of time
before your TV turns off automatically. You
could select Off, 10min, 20min, 30min,
60min, 90min, 120min, or 240min.
z Auto Sleep: Select On or Off. If TV doesn’t
receive the input source, select On and TV will
turn off automatically.
z Time Zone: Select time based on GMT.
ViewSonic
28
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
OPTION
1. Press the MENU button to display the OSD
main menu.
2. Press ▲ or▼ to select the “OPTION” menu.
3. Press ► to enter the sub-menu, and use ▲▼ to
select the settings.
4. Press ◄► to adjust the settings.
5. Press OK or ► to confirm the settings.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
z Language: English only
z Audio Language: Available for digital channels
only, when multiple languages are broadcasted.
Lists available audio languages.
z Subtitle Language: English only
z CEC: on / off.
z Country: Australia
z Restore Factory Default: When this function is
activated, all settings will become to factory
default.
ViewSonic
29
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
LOCK
1. Press the MENU button to display the OSD
main menu.
2. Press ▲ or▼ to select the “LOCK” menu.
3. Press ► to enter the sub-menu, and use ▲▼ to
select the settings.
4. Press ◄► to adjust the settings.
5. Press OK or ► to confirm the settings.
6. Press MENU to return to the previous menu or
press Exit to exit the menu.
Lock System
Select On or Off.
When On is selected, CHANNEL functions are
locked. Only enter the password to access the
CHANNEL menu.
Set Password
1. Press ► to enter the sub-menu, and then press
▲▼ to highlight Set Password.
2. Press ► or OK to show the password setting
menu.
3. Press the number buttons to enter the old
password. If you have not set a password, enter
0000. Press OK to continue.
4. Press the number buttons to enter a new
password and confirm the new password again.
5. Press MENU to return to the previous menu or
press Exit to exit the menu.
*If you forget your password, enter 0711 for the old
password, and then enter a new password. This
password always remains valid for resetting your
password.
Block Programme:
1. Press ► to enter the sub-menu, and then press
▲▼ to highlight Block Programme.
2. Press ► to show the programme list.
3. Press ▲▼ to highlight channels that you want
to block.
4. Press Green button to lock or unlock the
channel.
5. Press MENU to return to the previous menu or
press Exit to exit the menu.
ViewSonic
30
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Parental Guidance (for DTV)
1. Press ► to enter the sub-menu, and then press
▲▼ to highlight Parental Guidance.
2. Press ► to select your desired rating
3. Press MENU to return to the previous menu or
press Exit to exit the menu.
Australian Parental code
Description
Rating
Off
P
Not Classified
Pre-School
C
Children
G
General
PG
Parental guidance
Recommended
Mature Audience 15+
Mature Adult Audience
15+.
M
MA (15+)
AV (15+)
R
Adult Audience Strong
Violence 15+
Restricted 18+
ViewSonic
31
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV
screen or case. Some chemical cleaners have been reported to damage the screen and/or case of
the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-
based cleaners
ViewSonic
32
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Troubles Shooting
Please contact ViewSonic service team directly if you have questions, service
needs, or require technical assistance related on the use of your television.
Contact ViewSonic Service Team at:
Or call our service team:
Australia: 1800 880 818,
Problem
Possible Solution
No power
z Make sure the power cord is properly connected LCD
TV AC power socket.
z Make sure the AC power cord is properly connected to
the wall outlet.
z Make sure the DC power button is ON (Blue LED)
z Plug another electrical device (like a radio) to the
power outlet to verify that the outlet is supplying the
proper voltage.
z The TV station may be experiencing problems. Try
another channel.
No picture
z The Cable TV signal may be scrambled or encoded.
Please contact your local cable operator.
z Make sure that connection to other components are
correct referring to the user guide.
z Make sure that setup has been done correctly
after connections.
z Make sure the correct input is selected and the input
signal is compatible.
Strange Colour, light
colour, or colour
misalignment
z Ensure that the video cable is securely connected.
z The picture may appear dim in a brightly lit room.
z Adjust brightness, contrast, saturation (colour), and tint
referring to the user guide.
z Check the input signal setting.
No sound
z Check your audio connections are properly connected
referring to the user guide.
z The MUTE button may have been pressed, try
pressing this button again.
z Check your audio settings, your TV audio may be set
to minimum.
z Press the Volume + (Up) button on the remote control.
ViewSonic
33
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Problem
Possible Solution
Remote control unit
does not operate
z Make sure the directions of batteries are inserted
correctly referring to the user guide.
z Batteries could be weak or dead. Replace by new
batteries.
z Is a fluorescent light illuminated near the remote
control sensor?
z The path of the remote control beam may be
blocked. Make sure the path is clear and that the
remote control is aimed at the remote control sensor
on the TV.
z Press the POWER button on the remote control to see
if you can turn on the TV.
z Press MENU button on the remote control to see if
there is a MENU shown on the screen.
z Press only one button at a time and it is the correct one
for the operation you want to perform.
z External influences such as lightning or static
electricity may cause improper operation. In this case,
operate the unit after first turning on the power of the
LCD TV and the AVC System, or unplug the AC cord
for 1 to 2 minutes, then replug again.
Unit cannot be
operated
Power is cut off
suddenly
z Is the sleep timer set in advance?.
z Is there no signal in PC mode or HDMI mode?
z The internal temperature of the unit has increased.
Remove any objects blocking the vent or clean as
necessary.
No CATV reception (or
no reception above
CH13)
z Is the AIR/CABLE option set correctly? Please set the
AIR/ CABLE option to CABLE referring to the user
guide.
z CATV is connected improperly or not connected;
please check all the CATV connections.
z The cable TV service is interrupted; please contact
your cable operator.
Picture is cut off / with
sidebar screen
z Is the image positioned correctly?
z Are screen mode adjustments such as picture size set
correctly?
z Press WIDE button repeatedly on the remote control to
see if you can get the picture you prefer.
ViewSonic
34
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Specifications
Model
N3290w
N4290p
N4790p
LCD
Type
31.5” TFT Active
Matrix RGB
42.02” TFT Active
Matrix RGB
47.0” TFT Active
Matrix RGB
0.1702(H)x0.5107(V)
mm pixel
0.5415(H)x0.1805(V)
mm pixel
0.1615(H)x0.4845(V)
mm pixel
Colour Filter
Glass surface
RGB vertical stripe
Anti-Glare
Input signal
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate
Sync, f : 31.5-68 kHz, f :60-75Hz
RGB
h
v
TV system PAL BG / DVB-T (7M Hz)
RF
Video
2 composite RCA, 1 S-Video,
2 YPbPr component, 4 HDMI, USB 2.0
Audio
1 mini-stereo,
4 pairs of RCA (L/R) stereo
Compatibility
Resolution
PC
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1024 x 768 @ 60 Hz
832 x 624 @ 75 Hz.
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
720 x 400 @ 70 Hz
Up to 1920 x 1080R @ 60 Hz, VGA mode
Recommended
and supported
(VGA mode)
1920 x 1080 @ 60 Hz
1280 x 1024 @ 60 Hz
1024 x 768 @ 60 Hz
832 x 624 @ 75 Hz.
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
720 x 400 @ 70 Hz
Speaker
Output
5W x 2 @ THD=10%
10W x 2 @ THD=10%
1 Headphone jack
Audio Output
1 pair of RCA (L/R) stereo
1 Digital audio out
Voltage
Power
100-240 VAC, 50/60 Hz (auto switch)
Full Scan
697.68(H) x 392.26 (V)
mm
930.24(H) x 523.26
(V) mm
1039.68(H) x
584.82(V) mm
Display area
27.5” (H) x 15.4” (V)
36.6” (H) x 20.6” (V)
40.9” (H) x 23.0” (V)
Temperature
Humanity
Altitude
Operating
conditions
32°F to + 104°F ( 0°C to + 40°C)
20% to 65% (no condensation)
To 10,000 feet (3,000m)
Storage
conditions
Temperature
Humanity
Altitude
-4°F to + 140°F (-20°C to + 60°C)
10% to 90% (no condensation)
To 40,000 feet (12,000m)
Dimensions
(with stand)
Physical
(W)x(H)x(D)
Net
783 x 562 x 210 mm
30.8” x 22.1” x 8.3”
1010 x 688 x 262 mm 1125 x 768 x 313 mm
44.3” x 30.2” x 12.3”
39.8” x 27.1” x 10.3”
Weight
(with stand)
11.5 kg (25.4 lb)
20.5 kg (45.2 lb)
26.5 kg (58.4 lb)
Regulations
C-Tick
Power
On
< 170 W (blue LED)
< 1 W (red LED)
< 250 W (blue LED)
< 1 W (red LED)
< 290 W (blue LED)
< 1 W (red LED)
consumption r Stand by
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
permanent damage to the LCD TV.
Note: Product Specifications are subject to change without notice.
ViewSonic
35
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Limited Warranty
VIEWSONIC® LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or
components.
How long the warranty is effective:
ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of
the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
Any product on which the serial number has been defaced, modified or removed.
2.
Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f.
Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3.
Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4.
5.
Removal, installation, and set-up service charges.
When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your
product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address,
(d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of
merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the
product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships,
or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local
ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and
conditions of the Maintenance Guarantee Card.
Information..
4.3 :ViewSonic LCD TV Warranty
LTV LW01 Rev 1C 06-25-07
ViewSonic
36
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Index
▲▼◄► buttons 20
N
0~9, - number buttons 20
O
OK button 20
A
AC input 12
P
AV Audio input 12
AV/ S-Video signal Audio input 12
Aspect button
PC Audio input 12
Power LED Indicator 11
Power ON/OFF button 11, 20
B
Q
R
C
Remote Control Receiver 11
CC button 21, 23
Remote Control and TV Control 19-23
CH Down button 11, 21, 22
CH Up button 11, 21, 22
Composite Video input 12
S
S-Video Audio input 12,13
S-Video input 12,13
SLEEP button 20, 23,
D
E
Storing Channels into Memory 24
SOURCE button 11, 21, 22
EPG button 21
F
T
TV Input Jack 12
TV button 21
G
U
EPG button 21
H
V
HDMI Input Terminal 12
Headphone Jack 13
VGA signal input 12
Viewing the Menus 24
Volume Down button 11, 20, 22
Volume Up button 11, 20, 22
I
INFO button 20
W
X
J
K
Y
YPbPr Audio input 12
YPbPr signal input 12
L
LAST button 20
Z
M
MENU button 11, 20
MUTE button 21,22
ViewSonic
37
N3290w/N4290p/ N4790p
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic
Download from Www.Somanuals.com. All Manuals Search And Download.
|