Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
CE Conformity for European Countries
CE Conformity
The device complies with the requirements of the EEC directive
89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with
regard to ϘElectromagnetic compatibilityϙꢀꢁand 73/23/EEC as
amended by 93/68/EEC Art.13 with regard to ϘSafety.ϙ
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.ʳ
1
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV”
in this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician
for replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the equipment. When a cart is used, use
caution when moving the cart/equipment combination to avoid injury
from tipping over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
ViewSonic
N2600w
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2006. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
For Your Records
Product Name:
N2600w
ViewSonic LCD TV
VS10946-1E
Model Number:
Document Number:
Serial Number:
Purchase Date:
N2600w-1E_UG_ENG Rev. 1A 12-15-05
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide
information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with
environmental laws of your location.
3
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810
of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or
the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing
serious injury; turn off your LCD TV and wait for the weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits, When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
Cleaning the LCD TV
y
Make sure the LCD TV is turned off.
y
Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,
lint-free cloth, and wipe the screen.
To clean the case:
1 Use a soft, dry cloth.
2 If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent
onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV.
ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic
N2600w
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Congratulations on your purchase of a ViewSonic® LCD TV.
Important!Save the original box and all packing material for future shipping needs.
Package Contents
Your LCD TV package includes:
y
y
y
ʳ
LCD TV
y
y
y
Universal Remote Control with batteries
ViewSonic User Guide
Power Cable
RF Cable
Quick Start Guide
ʳ
ʳ
ʳ
5
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the LCD TV on the wall
Hanging the LCD TV on the wall requires special skill that only be performed by qualified
service personnel. Please contact ViewSonic or your local distributor for the installation
instruction.
Hanging the LCD TV on the wall requires special skill that only be performed by qualified
service personnel. Please contact ViewSonic or your local distributor for the installation
instruction and service. Before hanging your LCD TV on the wall, please follow the steps
below:
1. Turn off the AC switch on the back of your LCD TV.
2. Spread cushion over the base area to lay the LCD screen on.
3. Unfasten 9 screws in the base to detach the stand from the LCD screen.
4. Contact qualified service personnel for the optional VESA wall mount bracket.
5. Follow the instructions of the VESA wall mount bracket to mount the LCD TV to the
wall.
ViewSonic
N2600w
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Move loudspeaker secure
It please arrange with ViewSonic or your local distributor to move it except the loudspeaker.
Please carry out and operate following:
1. Cut off the power to join.
2. Face LCD TV below on the towel or the woolen blanket.
3. Disassemble 9 screws in the base.
4. Move except that the base.
5. Disassemble 4 screws of the back loudspeaker.
6. Exert oneself downward, remove the loudspeaker.
7
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Side View of the Product
A
Input
Select the Input source.
Confirm OSD menu selection.
B
C
D
E
F
Volume Up
Increase volume or adjust a highlighted increasingly control while in OSD menu.
Volume Down
Decrease volume or adjust a highlighted control decreasingly while in OSD menu.
CH Up
Channel up/ Scroll up.
CH Down
Channel down/ Scroll down.
MENU
Turn OSD menu ON/OFF.
G
Power
Turn the power ON/OFF.
ViewSonic
N2600w
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
9
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
TV signal input
Connect to the antenna or cable service.
A
B
C
D
E
F
YCbCr signal Audio input (left/right)
Connect the external audio into this jack.
YCbCr signal input
Connect the external video device with component output to these jacks.
AV/ S-Video signal Audio input (left/right)
Connect the external audio into this jack.
AV Video input
Connect the external video devices such as VCR, DVD and video game into this jack.
S-Video input
Connect the external video device such as VCR, DVD and video game into this jack.
Earphone output
G
H
I
AC power switch (Default = ON)
Power (AC input)
Using cable provided, connect to a power source.
PC Audio input
J
K
L
HDMI signal input
HDMI-DVI Audio input
Connect the external video devices with RCA audio output to these jacks.
VGA signal input
M
N
SCART2
Connect the scart socket of the VCR to the SCART2 socket on the LCD TV
SCART1
O
P
Connect the scart socket of the VCR to the SCART1 socket on the LCD TV
Audio output
Connect this port to your external speaker
ViewSonic
N2600w
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1
14
2
3
15
16
4
5
17
18
19
6
7
8
20
21
22
23
9
10
11
24
2ꢀ
12
13
2ꢁ
Remote control button function as follow
1
2
3
4
5
6
SOURCE
Select Input Source.
0~9
Input channel number.
Recall
Return to the previous channel.
Adjust Volume.
VolumeŸ / Volumeź
SRS
Enable/Disable Surround Sound.
Mute On/Off.
MUTE
TELETEXT Function
Key (Green)
Select the teletext pages color coded in green along
the bottom of the screen.
7
8
TELETEXT
Switch Teletext On/Off.
TELETEXT Function
Key (Red)
Select the teletext pages color coded in red along the
bottom of the screen.
9
10
DISPLAY
Displays the sources and time.
11
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
13
14
SLEEP
Set timer to turn off TV.
PIP/POP
PIP/SOUR
POWER
Activate PIP or POP feature.
Press to toggle the Sub picture between PIP and POP.
Power ON/OFF.
Use this button to select the channel number with
“-/—”.
15
-/—
16
17
Channel Ÿ / Channelź Change TV channels.
NICAM
Select the sound mode.
Ÿ/ź for OSD function select and Ż/Ź for function
adjust.
VOLŸ and VOLź button can adjust the volume when
there is no OSD menu display. CHŸ and CHź can
change the channel on TV mode when there is no
OSD menu display (For certain models).
18
Ÿ/ź/Ż/Ź/OK Button
Display menu, hold for 2~3 seconds to exit OSD
menu.
19
20
Menu
TELETEXT Function
Key (Blue)
Select the teletext pages color coded in blue along the
bottom of the screen.
21
22
SUB PAGE
INDEX
Select a secondary Teletext page.
Select Teletext index page.
TELETEXT Function
Key (Yellow)
Select the teletext pages color coded in yellow along
the bottom of the screen.
23
24
25
WIDE
Change Aspect Ratio.
Toggles between input sources for the Main and Sub
picture.
PIP/SWAP
Change the display position of the Sub Picture in PIP
mode.
26
PIP/POS
ViewSonic
N2600w
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery
compartment.
3 Reattach the battery cover.
CAUTION
y
y
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage, which may
pose a risk of fire or lead to personal injury.
y
Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly
may result in cracking or leakage, which may pose a risk of fire or lead to personal
injury.
y
y
y
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove the
batteries.
13
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connecting with the antenna
Make sure the power is off before installing N2600w.
Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable.
RF Cable
3. Connect Audio Cable
To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port
to the appropriate AUDIO IN port on a compatible amplifier as shown on the right.
Audio in Cable
(Cable not supplied)
ViewSonic
N2600w
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices
Connect Video/Audio cables from compatible devices into the right side of N2600w.
AV Mode:
RCA A/V Cable
(Cable not supplied)
VCR
S-Video Mode:
S-Video Cable
(Cable not supplied)
Audio in Cable
(Cable not supplied)
VCR
15
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
YCbCr Mode:
YCbCr Cable
(Cable not supplied)
Audio in Cable
(Cable not supplied)
DVD Player or VCR
YPbPr Mode:
YCbCr Cable
(Cable not supplied)
Audio in Cable
(Cable not supplied)
DVD Player or VCR
ViewSonic
N2600w
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect with a SCART cable
SCART1 Mode:
Connect the scart socket of the VCR to the SCART1 socket on the LCD TV.
Note: The signal type RGB can only be selected for the SCART1 socket and the SCART1
input source can be received. These signals are transmitted, for example, by a pay TV decoder,
game machine or photo CD unit, etc and that digital signal can be recorded via SCART1
socket.
SCART Cable (Cable not supplied)
SCART2 Mode:
Connect the scart socket of the VCR to the SCART2 socket on the LCD TV.
Note: In SCART2 socket, the video output is not available.
SCART Cable (Cable not supplied)
17
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Mode:
There are two possible HDMI cable terminals of your DVD player. Please refer to one of the
connection that fits for your requirement.
(1) HDMI-DVI cable
DVD Player
(DVD Palyer should have the HDMI output terminal)
HDMI-DVI Cable (Cable not supplied)
Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting
HDMI audio to YCbCr. However, the input source should be in HDMI.
(2) HDMI cable
DVD Player
(DVD Player should have the
HDMI output terminal)
HDMI Cable (Cable not supplied)
Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting
HDMI audio to HDMI. However, the input source should be in HDMI.
ViewSonic
N2600w
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect to the PC
VGA (15pin D-Sub):
Connect the VGA cable from VGA output of PC to the VGA terminal input of N2600w.
PC up to 1280 x 1024, or 1360 x 768 is the preferred resolution.
PC
VGA 15 Pin Cable
PC Audio in:
Connect the Audio In cable (green) from audio output of your PC to the audio input terminal
(green) of N2600w.
PC
PC Audio in Cable
(Cable not supplied)
19
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI:
Connect the HDMI cable from HDMI output of PC to the DVI terminal input of N2600w.
PC
HDMI Cable (Cable not supplied)
Earphone:
Connect Earphone from compatible devices into the earphone input at the left side of
N2600w.
Earphone
(Cable not supplied)
ViewSonic
N2600w
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect power cable
Connect the power cord to the N2600w then to a properly grounded AC outlet. Turn on the
AC Switch on the back of N2600w
AC Switch
Switch to ON
AC wall socket
7. Turn Power ON
Press the Power button under the LCD TV, or press the Power On (red) button on the Remote
Control. Turn Video source power ON.
8. Select input source for your LCD TV, via either OSD menu or Remote
control
21
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
To operate the function of your LCD TV, you can use your remote control or those buttons
above your LCD TV to set input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main AC Power Switch, located on the rear of the cabinet. (If the LCD TV
will not be used for a long period of time, please turn it off) The power LED indicator
will be red when AC Power Switch is on.
Power On/Off
To turn the LCD TV on/off :
Press the POWER button under the LCD TV or press the Power button on your remote
control to turn on/off the TV. The power LED indicator is green when the LCD TV is on.
Select input source
Select the required input sources. Press the “Input” button at the right side of the LCD TV or
on the remote control repeatedly until the desired source appears.
VOLUME Adjusting
Press VOL-/+ at the right side of the LCD TV to adjust the volume, or press VolŸ and Volź
on the remote control to adjust the volume.
To silence the volume, press MUTE on the remote control.
If you want to restore volume, press MUTE again, or press VolŸ and Volź on the remote
control directly.
Channel Select
To select the channel you want, press CH-/+ buttons at the right side of the LCD TV, or press
number keys, CHŸ or CHź on the remote control to select your desired channel.
Use the button “-/—” to select the channel number with dash.
Return to the previous channel, press RECALL on your remote control.
ViewSonic
N2600w
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Functions
OSD style and operation tips
OSD Operation
Press the “Menu” button on your remote control or right side of the LCD TV to open the OSD
Main Menu.
Press Ÿ or ź button to select the sub menu, and pressŻ or Ź to enter the sub menu.
Press Ÿ or ź to select the function you would like to adjust, and then press Ż or Ź or OK to
adjust it or execute the function.
Press the “Menu” button on your remote control or right side of the LCD TV again to close
the OSD Main Menu.
The 5 icons at the left of the OSD Main menu stand for the 6 sub menus (Picture, Sound, TV,
Option, PC, and OSD).
23
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
Item
Description
Operation
Ź to increase the contrast.
Adjust the contrast level.
Contrast
Ż to decrease the contrast.
Ź to brighten the display.
Adjust the brightness level.
Adjust the tint level.
Brightness
Hue
Ż to darken the display.
Ź to increase the greenish tone.
Ż to increase the reddish color.
Ź to increase the brilliant color.
Adjust color saturation.
Adjust the picture sharpness.
Saturation
Ż to increase the pale color.
Ź to sharpen the display.
Sharpness
Color Temp.
Aspect Ratio
Ż to soften the display.
Set the color temperature to
Normal, Warm, or Cool.
Ź or Ż: activate your selection.
Ź or Ż: activate your selection.
Ź or Ż: activate your selection.
Set the view mode (16:9, Zoom,
14:9, 4:3, Panorama)
Set the picture mode to
Standard, Movie, Vivid, or User
Picture
Mode
ViewSonic
N2600w
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound menu
Item
Description
Operation
Audio setup (Main picture or
sub picture)
Source
ŻŹ to select Main or sub.
Ź to increase lower-pitched sound.
Bass
Treble
Adjust the bass.
Adjust the treble.
Ż to decrease lower-pitched sound.
Ź to increase higher-pitched sound.
Ż to decrease higher-pitched sound.
Adjust the left and right audio
balance.
Ź to emphasize the right speaker.
Ż to emphasize the left speaker.
Balance
This item is available only when
the current TV broadcast
supports stereo or SAP audio
output format.
ŻŹ: select Mono, Stereo or SAP.
NICAM
You can switch among Mono,
Stereo or SAP.
25
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
TV menu
Item
Description
Operation
Ź or Ż: select current Channel
Number. Default Current Channel
Number
Cur. Channel TV Channel Number
OK: modify Name
Channel
Name
MENU: leave Modify Mode
Ÿ or ź:change the char value
Ź or Ż:select char
Current TV Channel Name
Frequency
ADD/Delete
Current TV Channel Frequency Ź or Ż:change the value
ADD: Restores the TV channel
previous deleted.
Delete: Deletes the current TV
Ź or Ż: select ADD or Delete.
channel.
Select the TV input source:
Ź or Ż: select Cable or Antenna.
Antenna or Cable.
System
Country
Set TV Channel Country
Ź or Ż: select used country
Auto
Scan/Fully
Search
Ź or Ż: execute Auto Scan. When
country is set as “other” this item
shows Fully Search.
Scan all the TV channels.
Reset Default Value
N2600w
TV Reset
ViewSonic
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Option menu
Item
Description
Operation
Set the timer for the TV to
automatically turn off, Available
options are OFF, 15 Min, 30 Min,
45 Min, and 60 Min.
ŹorŻ to select OFF, 15 Min,
30 Min, 45 Min, and 60 Min.
Sleep Timer
Ź or Ż enter Multi Picture
sub menu.
Adjust sub picture functions
Multi Picture
27
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi Picture Sub Menu
Item
Description
Operation
Setting Sub picture input source.
Ź or Ż to select input source
Sub Source
This item is available only if PIP is
Selected.
Ź to move toward the right.
H-Position
Adjust the horizontal position of the
sub picture.
Ż to move toward the left.
This item is available only if PIP is
Selected.
Ź to move downward.
V-Position
Adjust the vertical position of the
sub picture.
Ż to move upward.
Sub picture Border color setup
Ź or Ż to select color.
Border color
Swap
Change Main source and PIP
source.
Ź or Ż to change
ViewSonic
N2600w
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Menu
Description
Operation
Item
Ź to increase the contrast.
Adjust the contrast level.
Contrast
Ż to decrease the contrast.
Ź to brighten the display.
Adjust the brightness level.
Brightness
Ż to darken the display.
Ź to move toward the right.
Adjust the horizontal position of the
video
H-Position
Ż to move toward the left.
(VGA only)
Ź to move upward.
Adjust the vertical position of the
video.
V-Position
Ż to move downward.
(VGA only)
Adjust the delay time between
horizontal synchronous signal and
video.
Ź to increase the delay time.
Clock
Ż to decrease the delay time.
(VGA only)
Ź to increase the delay time.
Phase
Adjust the delay time.
Select color Mode.
Ż to decrease the delay time.
(VGA only)
Ź or Ż enter Color Mode sub
menu.
Color Mode
Automatically adjust the picture’s
clock, phase, horizontal position
(VGA only) and vertical position.
Ź or Ż to activate the
function
Auto Adjust
29
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Mode Sub Menu
Description
Operation
Item
Some default color temp set is
here. Options : Normal, Warm,
sRGB, User and Cool
Color
Ź or Ż to select color.
Temp.
Ź to increase the color temp.
You can adjust R to change color
temp.
User-R
User-G
User-B
Ż to decrease the color temp
Ź to increase the color temp.
You can adjust G to change color
temp.
Ż to decrease the color temp
Ź to increase the color temp.
You can adjust B to change color
temp.
Ż to decrease the color temp
ViewSonic
N2600w
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD menu
Item
Description
Operation
OSD
Select the OSD language.
Ź or Ż: select the OSD language.
Language
Ź: move toward the right.
Adjust the horizontal position
of the OSD.
H Position
V Position
Ż: move toward the left.
Ź: move upward.
Adjust the vertical position of
the OSD.
Ż: move downward.
Ź: increase the OSD display time.
OSD Time
Out
Adjust OSD display time.
Range 0~60 sec.
Ż: decrease the OSD display time.
Ź: increase the transparency.
Adjust OSD’s transparency
level.
Transparency
Ż: decrease the transparency.
Show some Picture
information including
main/sub picture source and
firmware version.
Information
Ź or Ż: display information.
Reset the OSD settings to
default.
OSD Language and Input
Source settings are not
affected.
Memory
Recall
Ź or Ż: activate the function.
31
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
LCD
Type
26” view able
ʳ
ʳ
ʳ
Color Filter
Glass surface
ʳ
0.4215(H) x 0.4215(V) mm pixel pitch
RGB vertical stripe
Anti-Glare
Input signal
RGB
RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync,
fh:30-80 kHz, fv:50-75 Hz
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
RF
Video
TV system Antenna/ PAL/SECAM
D-sub x 1, RCA Composite x 1, S-Video x 1
RCA Component x 1 set (YCbCr/YPbPr)
HDMI X 1, SCART x 2
ʳ
Audio
PC
Mini-stereo (ӥ3.5mm) x 1,
3 pair of RCA (L/R) stereo jack
Compatibility
Resolution
Up to 1360 x 768 Non-interlaced
1360 x 768 @ 60 Hz
Speaker Output
Audio Output
ʳ
ʳ
5W x 2
1 pair of RCA (L/R) stereo jack
Earphone Mini-stereo (ӥ3.5mm) x 1
Power
Voltage
90-240 VAC, 50/60 Hz (auto switch)
575.769mm (H) x 323.712 mm (V)
Display Area
Full Scan
Operating
Conditions
ʳ
Temperature
Humidity
32° F to + 104° F (0° C to + 40° C)
10% to 90% (non-condensing)
Storage
Conditions
ʳ
Temperature
Humidity
-4° F to + 140° F (-20° C to + 60° C)
10% to 90% (non-condensing)
Dimensions
Physical
688 mm (W) x 546 mm (H) x 250 mm (D)ʳ
27.08 in (W) x 21.49 in (H) x 9.84 in (D)
Weight
Net
Gross
ʳ
13.6 kg (29.96 lb.)
17.0kg (37.44 lb.)
CE
Regulations
Power Saving
Mode
On
Active Off
< 180W
< 3W
LED Green
LED Off
Preset Timing Mode (pre-adjusted to GTF 1360 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result
in permanent damage to the LCD TV.
Note: Product Specifications are subject to change without notice.
ViewSonic
N2600w
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
y
y
y
y
Make sure the LCD TV is properly connected.
Make sure the AC power cord is properly connected.
Make sure the AC power is ON, DC power button is ON (Green LED).
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
y
y
The TV station may be experiencing problems. Try another channel.
The Cable TV signal may be scrambled or encoded. Please contact your local cable
operator.
y
y
y
Make sure that connection to other components are correct.
Make sure that setup has been done correctly after connections.
Make sure the correct input is selected and the input signal is compatible.
Strange color, light color, or color misalignment
y
y
y
y
Ensure that the video cable is securely connected.
The picture may appear dim in a brightly lit room.
Adjust brightness and contrast.
Check the input signal setting.
No Sound
y
y
y
y
Check your audio connections
The MUTE button may have been pressed, try pressing this button again.
Check your audio settings, your TV audio may be set to minimum.
Press the Volume + (Up) button on the remote control.
Remote control unit does not operate
y
y
y
y
Make sure batteries are inserted correctly.
Batteries could be weak or dead. Replace batteries.
Is a fluorescent light illuminated near the remote control sensor?
The path of the remote control beam may be blocked. Make sure the path is clear and that
the remote control is aimed at the remote control sensor on the TV.
y
Press only one button at a time and it is the correct one for the operation you want to
perform.
Unit cannot be operated
y
External influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TVand the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
33
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Power is cut off suddenly
y
y
Is the sleep timer set?
The internal temperature of the unit has increased. Remove any objects blocking the vent
or clean as necessary.
No CATV reception (or no reception above CH13)
y
y
Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE.
CATV is connected improperly or not connected; please check all the CATV
connections.
y
The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with sidebar screen
y
y
Is the image positioned correctly?
Are screen mode adjustments such as picture size set correctly?
ViewSonic
N2600w
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
Contry / Region
Austria
Web site
Telephone
0150 159 6005
02 256 6642
35 25 65 12
Belgium
Denmark
Finland
09 2311 3413
03 8717 1616
0696 630 8051
01 411 8936
02 4527 9033
40 6661 5618
053 484 9308
22 57 77 38
France
Germany
Republic of Ireland
Italy
Luxembourg
The Netherlands
Norway
Portugal
21359 1423
Russia
800-200-8439
913 496 534
08 5792 9045
0207 949 0307
Spain
Sweden
United Kingdom
35
ViewSonic
N2600w
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC® LCD TV
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during
the warranty period. If a product proves to be defective in material or workmanship during the warranty period,
ViewSonic will at its sole option, repair or replace the product with a like product. Replacement product or parts
may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic LCD TV’s are warranted for one (1) year for all parts excluding the light source and one (1) year for
labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image
is displayed on the product for an extended period of time.
4. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support at
800-888-8583. You will need to provide your product's serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name,
(c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center
or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the
implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable
for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of
use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference
with business relationships, or other commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or
consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact
ViewSonic or your local ViewSonic dealer.
Warranty_LCD TV
1 of 1
Release Date: 03-31-05
4.3: ViewSonic LCD TV Warranty Rev. la
ViewSonic
N2600w
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|