繁
體
中
文
®
ViewSonic
- 使用手冊
32/37/42 吋 Full-HD 液晶顯示器
32/37/42-Inch Full-HD LCD Display
- User Guide
Model No. : VT3245-NT / VT3745-NT / VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for further instructions.
7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9. To firmly secure the VT3745-NT LCD Display to your desktop or stand, fasten the anti-tip
auxiliary screw in the support hole for safety concerns.
ᚥཌྷौԁҺ˺M4 x 14mm!)1ԍ*
10. Follow the incrtuctions in the image on the right to intall the stand on the VT3245-NT model.
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade and the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is located near
the unit so that it is easily accessible.
13. Only use attachments/accessories specified by the manufacturer.
ViewSonic
ꢀ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
14.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the unit. When a cart is used, use caution when moving the cart/unit
combination to avoid injury from tipping over.
15. Unplug this unit when unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto
or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate
normally or has been dropped.
17. Operating temperature: 0~40°C.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment, display the
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of
more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the Eu-
ropean Parliament and the Council on restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration
values issued by the European Technical Adaptation Committee (TAC) as shown below:
Proposed Maximum
Substance
Actual Concentration
Concentration
Lead (Pb)
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
< 0.1%
< 0.1%
Mercury (Hg)
0.1%
Cadmium (Cd)
0.01%
0.1%
6+
Hexavalent Chromium (Cr
)
Polybrominated biphenyls (PBB)
0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS Directives
as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic
parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
The “HD ready” Logo is a trademark of EICTA.
ViewSonic
2
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions con-
tained herein; nor for incidental or consequential damages resulting from furnishing this material, or the
performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose with-
out prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes available, please
For Your Records
VT3245-NT, VT3745-NT, VT4245-NT
Product Name:
Model Name:
ViewSonic LCD Full-HD LCD Display
Document Number:
VS12920-1P, VS12921-1P, VS12922-1P
VT3245-NT_UG_TCH Rev. 1A 12-30-09
Serial Number:
Serial Number:
VT3745-NT_UG_TCH Rev. 1A 12-30-09
VT4245-NT_UG_TCH Rev. 1A 12-30-09
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product prop-
erly at the end of its useful life. Your local waste disposal company may provide information about
proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with environmental
laws of your location.
ViewSonic
3
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges. Do not
disconnect the antenna or the power cord during a heavy storm lighting may strike while you are
holding the cable cord, causing serious injury; turn off your LCD Display and wait for the weather
to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits, When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Antenna
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD Display
• Make sure the LCD Display is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD Display
screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD
Display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
ViewSonic
4
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the LCD Display
Congratulation in purchasing the LCD Color Display. This product has been designed to provide you
with a rich audio and video experience. This monitor enables you to watch broadcast or cable television
,channels, connect VCR, VCD or DVD player to watch your favorites movies, or connect a computer to
use the display as a monitor. The LCD Display is equipped with convenient control buttons located on the
front panel and a handy remote control to let you adjust the setting and customize the preferences through
an easy-to -use on screen menu system.
Enjoy the versatility of your LCD Display with its wide variety of features:
Color active matrix TFT LCD Display with remote control
Safe, sturdy construction
Maximum display resolution: 1920 x 1080
Audio / Video support
• HDMI analog audio input
• Component (YCbCr / YPbPr) video/audio input
• S-Video/Audio input
• AV-Video/Audio input
• VGA input
• PC audio input
• Earphone output
On-Screen Display (OSD) menu system
Product components
The following section describes the various components of the LCD Display. Please take a few moments
to familiarize yourself with the product and control panel before using it .
When you unpack this LCD Display, please make sure the box contains the following items:
• LCD Color Display
• Power Cord
• Remote Control (with 2 AAA batteries)
• User Manual
• Quick Start Guide
* If any of these items were missing or damaging, please contact service party for assistance.
Used or discharged batteries must be properly
disposed of or recycled in compliance with all
applicable laws.
For detailed information, contact your local
solid waste disposal authority
Batteries recycle
ViewSonic
5
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Front view
Power Indicator LED
1
訊號源 SOURCE
Switch among the input source.
2
3
4
5
選單 MENU
㿞㰳⑤
䙌ஂ
Press the button to enter On Screen Display (OSD).
音量 VOL +/-
1
2
Increase or decrease the volume.
選擇 CH p/q
䷇䞣ꢀꢁꢂ
䷇䞣ꢀꢃꢂ
䙌ꢀꢀꢂ
3
Increase or decrease channel number.
電源
POWER
䙌ꢀꢀꢂ
䳏⑤ꢀ
crease or decrease ch
4
5
Power indicator LED indicates if the LCD power is turned
on (blue) or in stand-by state (red).
ViewSonic
ꢁ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear view (32/42-inch)
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
NO
ITEM
FUNCTION
1
AC-IN
Connect to the AC outlet.
2
3
S-VIDEO IN
AV IN
Connect to the S-Video output jack of your video/audio device.
Connect to the A/V output jack of your A/V device.
Connect to the A/V output jack of your A/V device.
AV AUDIO IN
HDMI IN
4
Connect to the HDMI output of your PC or portable computer or A/V
device.
5
PC AUDIO IN
AUDIO OUT
PC -IN
Connect to the audio output of your computer.
6
Connect to the audio input jack of your audio device.
Connect to the VGA output of your PC or portable computer.
Connect RS-232 serial port cable for remote control (for service only).
7
8
RS232 IN
9
COMPONENT IN
COMPONENT AUDIO IN
AUDIO OUT
10
11
12
13
14
15
Connect to the component output jack of your component device.
Connect to the audio input jack of your Audio device.
Connect to the ATV signal and DTV signal.
Connect a USB source.
ANTENNA/TV MODULE
CONNECTORS
USB
ViewSonic
7
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear view (32/42-inch)
13
14
9
10
11
12
1
2
3
4
5
6
7
8
NO
ITEM
FUNCTION
1
USB
Connect a USB source.
2
3
PC -IN
HDMI IN
Connect to the VGA output of your PC or portable computer.
Connect to the HDMI output of your PC or portable computer or A/V
device.
PC AUDIO IN
AV AUDIO IN
Connect to the audio output of your computer.
4
Connect to the A/V output jack of your A/V device.
5
COMPONENT IN
COMPONENT AUDIO IN
AUDIO OUT
AV IN
6
Connect to the component output jack of your component device.
7
Connect to the audio input jack of your audio device.
Connect to the A/V output jack of your A/V device.
8
9
S-VIDEO IN
Connect to the S-Video output jack of your video/audio device.
Connect RS-232 serial port cable for remote control (for service only).
Connect to the audio input jack of your Audio device.
10
11
12
13
14
RS232 IN
AUDIO OUT
ANTENNA/TV MODULE
CONNECTORS
Connect to the ATV signal and DTV signal.
ViewSonic
ꢂ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1
電源 POWER
Turn power ON or OFF.
電源
1
2
2
SOURCE HOTKEYS
電視
色差
電腦
音樂
Press the hotkeys to select the input source.
數位相框
頻道往返
RETURN
3
Switch to the previous viewed channel.
4
音量 +/- VOL+/-
Increase + or decreases - the volume.
5
靜音 MUTE
Disable the audio output.
頻道往返
3
4
6
離開 EXIT
Exit OSD menus.
7
OSD MENU UP/FAST FORWARD
頻道
音量
Move up in OSD menus/fast forward media.
顯示
靜音
8
OSD MENU RIGHT/SKIP FORWARD
5
6
7
訊號源
離開
Move right in OSD menus/skip to next media.
9
確認 ENTER/PLAY
Enter the selected OSD item/Play media.
確認
8
10
選單 MENU
Press to enter current source OSD Menu.
9
11
音效 SOUND MODE
10
節目指南
雙語
選單
音效
Select the desired Sound Mode.
11
12
凍結
影像
12
影像 PICTURE MODE
Switch among four picture modes to change the picture
quality : USER, STANDARD, VIVID, SOFT.
ViewSonic
ꢃ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
13
凍結 FREEZE
Freeze the present image on the screen. To continue,
press the button again.
電源
電視
色差
電腦
音樂
14
雙語 MTS
數位相框
Switch between monaural, stereo, and audio modes.
This function enable you to receive a second language or
unrelated audio.
15
GUIDE (ONLY IN DTV OSD MENU)
Enter the program guide of DTV OSD.
21
20
16
睡眠 SLEEP TIMER
Press repeatedly to set the sleep timer from 15 to 60
minutes.
頻道往返
17
OSD MENU LEFT/SKIP BACKWARD
Move left in OSD menus/skip to previous media
頻道
音量
18
訊號源 SOURCE
Select the video source signal.
顯示
靜音
19
18
訊號源
離開
19
顯示 DISPLAY
Press to display the information of input signal.
20
頻道 CHANNEL +/-
確認
17
Press the + or - keys to increase or decrease the channel
number.
16
15
21
數字鍵 NUMBER KEYS
Press the number keys to enter channel numbers.
節目指南
雙語
選單
音效
14
13
凍結
影像
ViewSonic
ꢀ0
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Please refer to the following sections for detailed instructions about connecting the audio/ video (AV)
device of your LCD Display and view your favorite programmes or movies .These sections describe the
basic procedures required to set up your Display for easy and convenient viewing.
Inserting the remote control batteries
Insert the two AAA batteries provided into the remote control as described below:
1. Pull the latch on the battery compartment cover on the rear of the remote control and remove the
cover.
2. Insert the two supplied AAA batteries .Check the + and - ends of the batteries before inserting them
in the compartment.
3. Replace the cover and make sure it snaps securely back into place.
(A)
(A)
(B)
(B)
1
2
3
• Do not mix old and new batteries or batteries of different types together.
• Do not short -circuit ,disassemble ,heat or fire batteries.
• Remove the batteries to avoid damage from possible battery leakage if you anticipate that the remote
control will not be used for an extended period of time.
• Please handle the remote control with care. Avoid dropping it ,getting it wet ,or placing it in direct
sunlight, near a heater or in an area of high humidity.
Connecting power
1. Connect the supplied power cord to the AC IN jack on the rear of Display.
2. Connect the other end of the power cord to a power outlet.(AC 110V 60Hz).
ViewSonic
ꢀꢀ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Connections
PC Connector
I
M D H
VGA
DVI
Supported Resolutions
Compatibility table of PC
Mode
Inputs
Standard
DOS
Resolution
720x400(70Hz)
ꢁ40x4ꢂ0(ꢁ0Hz)
ꢂ00xꢁ00(ꢁ0Hz)
ꢀ024x7ꢁꢂ(ꢁ0Hz)
ꢀ3ꢁ0x7ꢁꢂ(ꢁ0Hz)
ꢀ2ꢂ0x720(ꢁ0Hz)
ꢀ2ꢂ0xꢀ024(ꢁ0Hz)
ꢀꢃ20xꢀ0ꢂ0(ꢁ0Hz)
Composite
SVHS
No
YPbPr
No
RGB
Yes
Yes
Yes
Yes
Yes
No
HDMI
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
VESA
VESA
VESA
VESA
VESA
VESA
VESA
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
ViewSonic
ꢀ2
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Connections
(32/42-inch)
(37-inch)
1
2
3
4
5
3
2
4
5
1
S-video cable
1
2
3
4
5
Connect to devices with S-video output such as DVD
players, Digital cameras, and satellite receivers.
A/V connector
Connect to devices with A/V output such as VCRs,
VCD players, and DVD players.
HDMI
Connect to devices with HDMI output such as Blu-ray
players, DVD players, Cable boxes, VCR / VCD play-
ers, PCs, and portable PCs.
Component cable
Connect to devices such as DVD players, Digital TV
receivers, and Digital satellite receivers.
Audio cable
Connect to devices with audio output such as DVD re-
corders, VCRs, and Home theater audio equipment.
ViewSonic
ꢀ3
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility table of Video
Mode
Resolution
Inputs
Standard
NTSC
EDTV
SDTV
SDTV
HDTV
HDTV
HDTV
HDTV
HDTV
HDTV
HDTV
Composite
Yes
No
SVHS
Yes
No
YPbPr
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
RGB
No
No
No
No
No
No
No
No
No
No
No
HDMI
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
4ꢂ0i(ꢁ0Hz)
4ꢂ0p(ꢁ0Hz)
57ꢁi(ꢁ0Hz)
57ꢁp(ꢁ0Hz)
720p(50Hz)
720p(ꢁ0Hz)
ꢀ0ꢂ0i(50Hz)
ꢀ0ꢂ0i(ꢁ0Hz)
ꢀ0ꢂ0p(50Hz)
ꢀ0ꢂ0p(24Hz)
ꢀ0ꢂ0p(ꢁ0Hz)
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Notes:
Refer to these notes before connecting any audio / video equipment to this Display:
• Refer to the manuals of your Display, stereo, or other equipment.
• Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have completed connecting everything. Never make or change connections when equipment
still connected to a power outlet.
• Connect DVD player directly to the Display. For example, do not connect DVD player to VCR and
then connect the VCR to your Display. This type of connection could distort both the picture and the
sound. Your VCR might have a copy protection system which could distorted the DVD image.
• Set the stereo system to the correct channel or source if your video equipment is also connected to a
stereo system.
• You only need one audio connection and one video connection between your Display and other audio/
video equipment (such as DVD player, VCR, Camcorder). This means it is possible you will not use
all the jacks on the Display.
• If you plan to watch Display via your DVD player or VCR, connect a coaxial cable to the DVD
player’s or VCR’s TUNER IN jack then connect to the antenna jack on your LCD Display. This allows
you to watch channels on the Display normally when the DVD player or VCR is off.
• The function of your existing audio/video equipment, governing the connection mode between your
Display and existing audio/video equipment. Progressive Scan Component Video and Component
Video have the highest picture quality but it can only be used if the connected video equipment
supports Progressive Scan Component Video or component video. S-Video provides a high signal
quality. Composite Video (a yellow Video jack ) provides a good video output. Please follow the
correct step to connect existing audio/video equipment.
ViewSonic
ꢀ4
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
1
Turn the LCD Display ON
5
㿞㰳⑤
Press the POWER key to turn on or off the pow-
er of the LCD Display. The indicate light is blue
as power ON and orange as power OFF.
4
䙌ஂ
䷇䞣ꢀꢁꢂ
䷇䞣ꢀꢃꢂ
䙌ꢀꢀꢂ
3
2
Select Channel
Press 選擇 ▲▼ or 頻道+/- key to increase or
decrease the channel number.
2
3
Adjust Volume
䙌ꢀꢀꢂ
䳏⑤ꢀ
Press 音量+/- key to increase (+) or decrease (-)
the volume.
1
電源
4
Menu
1
電視
色差
電腦
音樂
Press 選單 key to enter current source OSD
Menu.
數位相框
5
Switch the input source
Press 訊號源 key to list input source.
Press pqkey to choose the input source, select
and switch the wanted input source.
Press 確認 to adjust.
頻道往返
Use the Source Hotkeys to select the input
source directly.
頻道
音量
2
3
顯示
靜音
訊號源
離開
5
確認
4
節目指南
雙語
選單
音效
凍結
影像
ViewSonic
ꢀ5
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
6
Display
電源
Press 顯示 key to display channel number (in
TV mode) and information of ouput signal.
電視
色差
電腦
音樂
7
MTS
數位相框
Press 雙語 key to switch monaural and stereo
modes. This function enable you to receive a
second language or unrelated audio.
8
PICTURE MODE
Press 影像 key to change the picture quality :
USER, STANDARD, VIVID, SOFT.
9
Sound Mode
頻道往返
Press 音效 key repeatedly to select sound
mode.
頻道
音量
6
顯示
靜音
訊號源
離開
確認
節目指南
選單
雙語
凍結
影像
音效
7
8
9
ViewSonic
ꢀꢁ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the OSD Menu
The On-Screen Display (OSD) menu system provides a quick and simple method to adjust LCD Display
base setting. OSD menu can be viewed using both the remote control and the control buttons on the
control panel.
HDMI-1
PICTURE
PICTURE MODE
STANDARD
WEAK
NOISE REDUCTION
COLOR TEMP
AUTO Gamma
DCR
STANDARD
ON
OFF
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
1
2
3
4
5
Press 選單 key on the control panel or the remote control to view OSD menu.
Press pqkey to select the function.
Press 確認 key to enter the sub menu.
Press pqkey to select the item and press tuto adjust.
Press 選單 key on the control panel or 離開 key on the remote control to exit OSD menu.
After change settings on the OSD menu, the new settings are confirmed automatically
when OSD picture vanish, even did not press the menu to exit the OSD system.
ViewSonic
ꢀ7
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or the remote con-
trol to view OSD menu.
Picture Adjustment
1
2
The Picture adjustment enables you to
adjust Brightness, Contrast, Sharpness,
Color, Hue, Color Temp, and Dynamic
Contrast.
HDMI-1
ᐙቝ
ᐙቝᑓ
ڤ ᠧಛ
ލ ࠫ ۥ ᄵ ۞ྥ
இ
۞ྥ
ၲ
೯ኪGamma
೯ኪኙֺ
ᣂ
:
ฝ೯
ᒔᎁ :ᙇᖗ
ᙇ :
ڃ Ղԫ ᠦၲ:ಯ
נ Press pqkey to select [PICUTURE] mode.
Press tuor +/- key to select (PICTURE MODE)
item.
HDMI-1
PICTURE
PICTURE MODE
STANDARD
WEAK
NOISE REDUCTION
COLOR TEMP
AUTO Gamma
DCR
STANDARD
ON
OFF
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press tuor +/- key to select USER, STANDARD,
VIVID, or SOFT.
3
HDMI-1
PICTURE
PICTURE MODE
VIVID
NOISE REDUCTION
COLOR TEMP
AUTO Gamma
DCR
WEAK
STANDARD
ON
OFF
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
In preset Picture Modes, it is allowed to adjust each subpicture-item setting. Press
pq
key to select item and press
key or +/- key to adjust setting.
tu
ViewSonic
ꢀꢂ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or 離
開 key on the remote control to exit OSD
menu.
(BRIGHTNESS)
Adjust the levels of light on your screen. It
should be used in conjunction with the con-
trast option.
4
(CONTRAST)
Adjust the difference between the dark and
light level on your screen.
(SHARPNESS)
Adjust the sharpness level on your screen.
(COLOR)
Change the dominant color intensity on your
screen. Adjust this setting until the colors on
the screen look natural.
(HUE)
Change the color balance. Adjust this setting
so that colors on the screen are neither too
green or too magenta.
(Not applicable in PC mode)
(NOISE REDUCTION)
Press tuor +/- key to adjust the level of the
noise removal (OFF, WEAK, MEDIUM, or
STRONG. .
(COLOR TEMPERATURE)
Adjust the image color intensity:
USER, STANDARD, COOL, WARM
(AUTO GAMMA)
Press tuor +/- key to to turn on/off the auto
gamma adjustment on the picture.
(Not applicable in PC mode)
(DCR)
Turn on of off auto contrast adjustment.
(Not applicable in PC mode)
ViewSonic
ꢀꢃ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or the remote con-
trol to view OSD menu.
Sound Adjustment
1
2
The Sound adjustment enables you to
adjust volume, treble, bass, balance,
speaker output and surround setting.
HDMI-1
PICTURE
PICTURE MODE
STANDARD
WEAK
NOISE REDUCTION
COLOR TEMP
AUTO Gamma
DCR
STANDARD
ON
OFF
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select [SOUND] mode.
Press tuor +/- key to enter sub-menu.
HDMI-1
SOUND
SOUND MODE
STANDARD
BALANCE
SPEAKER
0
ON
HDMI AUDIO OUTPUT ON
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press tukey to select (SOUND MODE).
3
HDMI-1
SOUND
SOUND MODE
STANDARD
BALANCE
SPEAKER
0
ON
HDMI AUDIO OUTPUT ON
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
In default SOunD MODE, it is allowed to adjust each sub audio-item setting. Press
key
pq
to select an item and press
key or +/- key to adjust the settings.
tu
ViewSonic
20
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press tuor +/- key to select STANDARD,
MUSIC, MOVIE, SPEECH, USER.
4
5
Press 選單 key on the control panel or 離
開 key on the remote control to exit OSD
menu.
(TREBLE/BASE)
Adjust the high frequency content in audio
output.
(BALANCE)
Balance the volume of right and left speakers.
(AUTO VOLUME)
Turn AUTO VOLUME Control on or off.
(SPEAKER)
Turn auto speaker adjustment on or off.
(HDMI AUDIO INPUT)
Select the audio input source:
HDMI, VGA
ViewSonic
2ꢀ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or the remote con-
trol to view OSD menu.
TV Tuner Adjustment
1
2
• The Tuner Adjustment enables
user to adjust the settings of tuner
function.
HDMI-1
PICTURE
PICTURE MODE
STANDARD
WEAK
NOISE REDUCTION
COLOR TEMP
AUTO Gamma
DCR
• Tuner Adjustment can only be
STANDARD
ON
operated in TV mode.
OFF
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select [CHANNEL] mode.
Press tuor +/- key to enter sub-menu.
TV
CHANNEL
CATV/AIR
CATV
ˑˑ
AUTO SEARCH
ˑˑ
CHANNEL EDIT
SIGNAL STRENGTH
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select (CATV/AIR).
3
TV
CHANNEL
CATV/AIR
CATV
ˑˑ
AUTO SEARCH
ˑˑ
CHANNEL EDIT
SIGNAL STRENGTH
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select (AUTO SEARCH) and press
uto start scanning channels.
4
5
SEARCHING
24%
CHANNELS : 0
ᙇ : Stop
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
ViewSonic
22
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV OSD Functions
The DTV OSD (On-Screen Display ) menu present user a consistent look and feel throughout. User can
adjust the DTV channel system setting in this menu.
First time enter DTV OSD, the DTV channel system will be automatically search all
channels.
Press 選單 key on the control panel or the remote control to view OSD menu.
Press pqkey to select [DTV] mode then press tuor +/- key to enter sub-menu (make sure the input
source is in DTV mode).
DTV OSD MENU includes these main options:
• AUTO SEARCH
• CHANNEL EDIT
• SIGNAL STRENGTH
DTV
CHANNEL
ˑˑ
ˑˑ
AUTO SEARCH
CHANNEL EDIT
SIGNAL STRENGTH
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
ViewSonic
23
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press pqkey to select (CHANNEL EDIT).
DTV Channel Management
1
Press ukey to enter the CHANNEL EDIT submenu.
DTV
CHANNEL
ADD
103
104
105
106
107
108
109
110
111
112
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ADD
ADD
ADD
ADD
DELETE
DELETE
DELETE
DELETE
DELETE
ˍʳAdd/Delete
ˍʳ�Favorite
:
Move
ᒔᎁ : Select
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
2
1
Press pqkey to select (AUTO SEARCH) item and
press uto start scanning channels.
DTV Functions
DTV
CHANNEL
ˑˑ
ˑˑ
AUTO SEARCH
CHANNEL EDIT
SIGNAL STRENGTH
ˍʳAdd/Delete
ˍʳ�Favorite
:
Move
ᒔᎁ : Select
Discovered TV channels are displayed in the corre-
sponding panels.
Press pqkey to select (SIGNAL STRENGTH).
2
Press tu key to adjust the level of the signal
strength.
Press tuto select a channel to scan. The signal
strength and quality are displayed at the bottom of the
screen.
Press [PLAY] to add the selected channel to the chan-
nel list.
Press 選單 key on the control panel or 離開 key on
the remote control to exit OSD menu.
3
ViewSonic
24
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or the remote con-
trol to view OSD menu.
PC Setup
1
2
The PC Setup adjustment enable you to
adjust PC mode settings: AUTO AD-
jUST, H POSITION, V POSITION,
PHASE, and CLOCK (make sure the
input source is in PC mode).
VGA
PC SETUP
AUTO ADJUST
OFF
H POSITION
V POSITION
PHASE
0
0
0
0
CLOCK
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select [PC SETUP] mode.
Press tuor +/- key to enter sub-menu.
VGA
PC SETUP
AUTO ADJUST
OFF
H POSITION
V POSITION
PHASE
0
0
0
0
CLOCK
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select (AUTO ADjUST).
3
4
Press ukey to auto adjust screen to the best position.
VGA
PC SETUP
AUTO ADJUST
OFF
H POSITION
V POSITION
PHASE
0
0
0
0
CLOCK
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select PC SETUP parameters.
Press tukey to adjust the screen to the best position:
•
•
H POSITION—adjust the horizontal position of the
screen.
V POSITION—adjust the vertical position of the
screen.
• PHASE—adjust phase for the display.
• CLOCK—adjust the clock frequency of display.
ViewSonic
25
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Press 選單 key on the control panel or the remote con-
trol to view OSD menu.
Setup Adjustment
1
2
• The Setup adjustment enables
you to adjust LANGUAGE, OSD
TIME, SLEEPP TIMER, CLOCK
MODE, CLOCK SET, SCREEN
MODE, ASPECT, BLUE BACK,
and BACKLIGHT.
HDMI-1
SETUP
LANGUAGE
OSD TIME
ENGLISH
15 SEC
SLEEP TIMER
ASPECT
OFF
FULL
BLUE BACK
RESET
OFF
ˑˑ
• You can reset all the OSD settings
VERSION
VS32_V0.12
in this option.
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select [SETUP] mode.
Press tuor +/- key to enter sub-menu.
HDMI-1
SETUP
LANGUAGE
OSD TIME
ENGLISH
15 SEC
SLEEP TIMER
ASPECT
OFF
FULL
BLUE BACK
RESET
OFF
ˑˑ
VERSION
VS32_V0.12
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select (LANGUAGE).
Press tukey to select ENGLISH or 或繁體中文
3
4
.
HDMI-1
SETUP
LANGUAGE
OSD TIME
ENGLISH
15 SEC
SLEEP TIMER
ASPECT
OFF
FULL
BLUE BACK
RESET
OFF
ˑˑ
VERSION
VS32_V0.12
:
Move
ᒔᎁ : Select
ᙇ : Return
ᠦၲ:Exit
Press pqkey to select (RESET).
Press ukey to Restore to the factory original setting.
ViewSonic
2ꢁ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a USB Source
Insert a USB key containing valid file formats into the slot on the display and press 訊號源 key on the
control panel or 音樂 key on the remote control to select (USB) source.
˃˃ˍ˃˃ˍ˃˃Γ˃˃ˍ˃˃ˍ˃˃
ARTIST ALBUM
Music
SELECT ALL
NAME
PLAY
STOP
USB device is not connected
NEXT
RETURN
SETUP
Supported File Formats
PHOTO
jPEG
File types: *.jPG
Compatible File Format: jPEG Baseline (4:2:2/4:2:0)
Maximum Resolution: 7680*4320 (1920x4*1080x4) pixels
Not supported
BMP
GIF
Not supported
AUDIO
MPEG 1
File Type: *.mp3
Layer 3
PC Support Timing (kHz): 32, 44.1,48
Supported Bit rate (Kbits/sec): 32, 40, 48, 56, 64, 80, 96, 112,
128, 160,192, 224, 256, 320
MPEG 2
Layer 3
File Type: *.mp3
PC Support Timing (kHz): 22.05, 24
Support Bit rate (Kbits/sec): 16, 24, 32, 40, 48, 56, 64, 80, 96,
112,128,160
Others
Not supported
Device
USB host 2.0 is compatible with USB 1.1
Not supported: USB Hub, USB 2.0 OTG (On The Go)
and USB mass storage drivers
File System
Support FAT32 USB Flash memory sticks
Maximum supported memory size: 32GB
Maximum supported number of songs on a memory card: 3000
Press 音樂 key or 數位相框 key on the control to select the desired media type:
• Press 音樂 key to play music
• Press 數位相框 key to view photos
ViewSonic
27
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Guide
Press 節目指南 key on the remote control and wait for few seconds, the LCD Display will show the
program guide subpage.
There are six parts in the Program Guide:
1. Date and time: Shows the current date and time by day/month/year (DD/MM/YYYY).
2. Time range: EPG shows the program list within a 2-hour range. Current program will be shown in the
first block.
3. Channel menu: Shows all channel names.
4. Program List: Descends the manifestation program name in time zone according to the program
length.
5. Program time and name: Displays the program time and full name.
6. Program account: Presents more detail information if any.
The following keys are relevant to the operation:
pqtukeys: browses the channels
確認/PLAY key: selects and change the channels
選擇pqkey: page up or down
ViewSonic
2ꢂ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
No power
• Make sure the Display and the power cord are connected correctly.
• Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press
POWER in the remote control or the front control panel.
No picture
• Connect to local CATV system equipment, and make sure the signal is unlocked.
• Make sure the Display and the Audio/Video signal input devices are connected correctly.
• In PC (VGA) mode, the screen turns off automatically 2 minutes after no signal input detected.
In the other modes, the screen turns off automatically 15 minutes after no signal input detected.
Strange color, light color, or color misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting.
No sound
• Make sure the Mute function is not operated.
• When signal passed by the HDMI distribution amplifier, that may result in this situation.
Remote control unit does not operate
• Check if the batteries are inserted with the polarity(+,-)correctly aligned.
• Check if the batteries are discharged. Please replace with new batteries.
• Make sure that you do not use the remote control under strong or fluorescent lighting.
• Check if there is a fluorescent light illuminated near the remote control sensor.
• The path of the remote control beam may be blocked; please make sure the path is clear and that
remote control is aimed at the remote control sensor in the Display.
Power is cut off suddenly
• Check if the off timer or sleep timer are set.
• The unit’s internal temperature has increased. Remove any objects blocking the vents and clean them
to remove dust.
Picture is cut off /with side bar screen
• Check if the image position is correct.
• Check if the screen mode adjustments such as picture size are made correctly.
LCD Display does not operate
External influences such as lightning or static electricity may cause improper operation. In this case,
operate the unit after first turning on the power, or plugging the AC cord and plugging it in again after 1
to 2 minutes.
ViewSonic
2ꢃ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
You will need the product serial number.
T=Telephone
Country/
Region
Website
E-mail
F= Fax
T=886 2 2246 3456
Taiwan
F=886 2 2249 1751
Toll Free=0800 061 198
ViewSonic
30
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
VIEWSONIC® LCD Display
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty pe-
riod. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option,
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts
or components.
How long the warranty is effective:
ViewSonic LCD Displays are warranted for 1 year for all parts excluding the light source and 1 year for labor from the date of the
first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow
instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please refer to Customer Support
page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d)
a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty
of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,
loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other
commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your
local ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and
conditions of the Maintenance Guarantee Card.
ranty Information.
4.3: ViewSonic LCD Display Warranty
LTV_LW01 Rev. 1C 06-25-07
ViewSonic
3ꢀ
VT3245-NT/VT3745-NT/VT4245-NT
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|