ViewSonic Computer Monitor VA702 User Manual

®
ViewSonic  
VA702/VA702b  
LCD Display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance Information  
For U.S.A.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy, and if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
FCC Warning  
To assure continued FCC compliance, the user must use grounded power supply cord and the  
cables which are included with the equipment or specified. Also, any unauthorized changes or  
modifications not expressly approved by the party responsible for compliance could void the  
user's authority to operate this device.  
For Canada  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le  
matériel brouilleur du Canada.  
For European Countries  
CE Conformity  
The device complies with the requirements of the EEC directive 89/336/EEC as  
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic  
compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to  
“Safety.”  
User Information for all Countries  
Notice: Use the cables which are included with the unit or specified.  
ViewSonic VA702/VA702b  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions completely before using the equipment.  
2. Keep these instructions in a safe place.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this equipment near water.  
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in  
this guide for further instructions.  
7. Do not block any ventilation openings. Install the equipment in accordance with the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A grounding type  
plug has two blades and a third grounding prong. The wide blade and the third prong are  
provided for your safety. If the plug does not fit into your outlet, consult an electrician for  
replacement of the outlet.  
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the  
point where if emerges from the equipment. Be sure that the power outlet is located near  
the equipment so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the equipment. When a cart is used, use caution when moving the cart/  
equipment combination to avoid injury from tipping over.  
13. Unplug this equipment when it will be unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Service is required when the unit has  
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid  
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if  
the unit does not operate normally or has been dropped.  
ViewSonic VA702/VA702b  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Information  
Copyright © ViewSonic® Corporation, 2005. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of  
Microsoft Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered  
trademarks of ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and  
DDC are trademarks of VESA.  
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).  
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from  
furnishing this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right  
to change product specifications without notice. Information in this document may change  
without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes  
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic  
Wizard CD-ROM also provides an opportunity for you to print the registration form, which  
you may mail or fax to ViewSonic.  
For Your Records  
Product Name:  
VA702/b  
ViewSonic 17” LCD Display  
VS10781  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
VA702/b-1_UG_ENG Rev. 1A 04-25-05  
________________________________  
________________________________  
Product disposal at end of product life  
ViewSonic is concerned about the preservation of our environment. Please dispose of this  
product properly at the end of its useful life. For TCO'03 recycling information, please refer to  
our website:  
3. Taiwan: recycle.epa.gov.tw  
ViewSonic VA702/VA702b  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Congratulations on your purchase of a ViewSonic® LCD display.  
Important! Save the original box and all packing material for future shipping needs.  
NOTE: The word “Windows” in this user guide refers to the following Microsoft operating  
systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me  
(Millennium), and Windows XP.  
Package Contents  
Your LCD display package includes:  
• LCD display  
• Power cord  
• Video cable  
• ViewSonic Wizard CD-ROM  
• Quick Start Guide  
NOTE: The CD includes the User Guide PDF files and INF/ICM display optimization files.  
The INF file ensures compatibility with Windows operating systems, and the ICM file (Image  
Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install  
both the INF and ICM files.  
Precautions  
• Sit at least 18” from the LCD display.  
• Place the LCD display in a well ventilated  
area. Do not place anything on the LCD  
display that prevents heat dissipation.  
Avoid touching the screen. Skin oils are  
difficult to remove.  
• Ensure the area around the LCD display is  
clean and free of moisture.  
Never remove the rear cover. This LCD  
display contains high-voltage parts. You  
may be seriously injured if you touch  
them.  
• Do not place heavy objects on the LCD  
display, video cable, or power cord.  
• Avoid exposing the LCD display to direct  
sunlight or another heat source. Orient the  
LCD display away from direct sunlight to  
reduce glare.  
• If smoke, an abnormal noise, or a strange  
odor is present, immediately switch the  
LCD display off and call your dealer or  
ViewSonic. It is dangerous to continue  
using the LCD display.  
• Always handle the LCD display with care  
when moving it.  
• Do not rub or apply pressure to the LCD  
panel, as it may permanently damage the  
screen.  
ViewSonic VA702/VA702b  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation  
1. Connect power cord (and AC/DC  
adapter if required)  
NOTE: If the CD-ROM does not auto-  
start: double-click on the CD-ROM icon in  
the Windows Explorer, then double-click  
on viewsonic.exe.  
2. Connect video cable  
• Make sure both the LCD display and  
computer are turned OFF  
• Follow the on-screen instructions.  
5. Windows users: Set the timing mode  
(resolution and refresh rate)  
• Connect the video cable from the LCD  
display to the computer  
Example: 1280 x 1024 @ 60 Hz.  
Macintosh users: Models older than G3  
require a Macintosh adapter. Attach the  
adapter to the computer and plug the video  
For instructions on changing the resolution  
and refresh rate, see the graphics card’s  
user guide.  
cable into the adapter.  
To order a ViewSonic® Macintosh adapter,  
contact ViewSonic Customer Support.  
Installation is complete. Enjoy your new  
ViewSonic LCD display.  
To be best prepared for any future  
customer service needs: print this user  
guide and write the serial number in “For  
Your Records” on page 3. (See back of  
LCD display.)  
3. Turn ON LCD display and computer  
Turn ON the LCD display, then turn ON  
the computer. This sequence (LCD display  
before computer) is important.  
NOTE: Windows users may receive a  
message asking them to install the INF  
file. This is on the CD.  
You can register your product online at the  
ViewSonic website for your region. See  
the Customer Support table in this guide.  
The ViewSonic Wizard CD-ROM also  
provides an opportunity for you to print  
the registration form which you may mail  
or fax to ViewSonic.  
4. Insert the ViewSonic Wizard CD into  
the computer’s CD drive.  
Follow the on-screen instructions. If your  
computer does not have a CD-ROM drive,  
see “Customer Support” on page 14.  
• Wait for the CD-ROM to auto-start.  
AC IN  
D-SUB  
AC Outlet  
(Wall Socket)  
Computer Power Cord  
ViewSonic VA702/VA702b  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall Mounting (Optional)  
To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the  
instructions that come with the base mounting kit. To convert your LCD display from a desk-  
mounted to a wall-mounted display, do the following:  
1. Verify that the Power button is turned  
Off, then disconnect the power cord.  
2. Push the LCD display back and down  
flat against the base as shown.  
3. Lay the LCD display face down on a  
towel or blanket. Notice the four  
Four  
screw  
holes  
screw holes on the back cover.  
4. Attach the mounting bracket from the  
VESA compatible wall mounting kit  
(100 mm x 100 mm distance).  
5. Attach the LCD display to the wall,  
following the instructions in the wall-  
Mounted  
on the wall  
mounting kit.  
ViewSonic VA702/VA702b  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the LCD Display  
Setting the Timing Mode  
Setting the timing mode is important for maximizing the quality of the screen image and  
minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and  
refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the  
OSD (On Screen Display) controls to adjust the screen image.  
For the best picture quality set your LCD display timing mode to:  
VESA 1280 x 1024 @ 60Hz.  
To set the Timing Mode:  
1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the  
resolution.  
2. Set the refresh rate: See your graphic card's user guide for instructions.  
WARNING: Do not set the graphics card in your computer to exceed the maximum refresh  
rate of 75Hz; doing so may result in permanent damage to your LCD display.  
OSD and Power Lock Settings  
OSD Lock: Press and hold [1] and the up arrow S for 10 seconds. If any buttons are  
pressed the message OSD Locked will display for 5 seconds.  
OSD Unlock: Press and hold [1] and the up arrow S again for 10 seconds.  
Power Button Lock: Press and hold [1] and the down arrow T for 10 seconds. If the  
power button is pressed the message Power Button Locked will display for 5 seconds. With  
or without this setting, after a power failure, your LCD display’s power will automatically  
turn ON when power is restored.  
Power Button Unlock: Press and hold [1] and the down arrow T again for 10 seconds.  
ViewSonic VA702/VA702b  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Screen Image  
Use the buttons on the front control panel to display and adjust the OSD controls which display  
on the screen. The OSD controls are explained at the top of the next page and are defined in  
“Main Menu Controls” on page 10.  
Main Menu  
with OSD controls  
Front Control Panel  
shown below in detail  
Power light  
Displays the control screen  
for the highlighted control.  
Green = ON  
Also toggles between two  
controls on some screens.  
Orange = Power Saving  
Standby Power  
On/Off  
Also a shortcut to Auto  
Image Adjust.  
Scrolls through  
menu options and  
adjusts the  
Displays the  
Main Menu or  
exits the  
control screen  
and saves  
displayed control.  
Also a shortcut to  
display the  
Contrast  
adjustment control  
screen.  
adjustments.  
ViewSonic VA702/VA702b  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do the following to adjust the display setting:  
1. To display the Main Menu, press button [1].  
NOTE: All OSD menus and adjustment screens disappear automatically after about 15  
seconds. This is adjustable through the OSD timeout setting in the setup menu.  
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.  
3. After the desired control is selected, press button [2]. A control screen like the one shown  
below appears.  
The line at the bottom of the screen shows  
the current functions of buttons 1 and 2:  
Exit or select the Brightness control.  
4. To adjust the setting, press the upSor downTbuttons.  
5. To save the adjustments and exit the menu, press button [1] twice.  
The following tips may help you optimize your display:  
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to  
the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's  
user guide.)  
• If necessary, make small adjustments using H. POSITION and V. POSITION until the  
screen image is completely visible. (The black border around the edge of the screen should  
barely touch the illuminated “active area” of the LCD display.)  
ViewSonic VA702/VA702b  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Menu Controls  
Adjust the menu items shown below by using the upSand downTbuttons.  
Control Explanation  
Auto Image Adjust automatically sizes, centers, and fine tunes the video signal  
to eliminate waviness and distortion. Press the [2] button to execute Auto Image  
Adjust.  
NOTE: Auto Image Adjust works with most common video cards. If this  
function does not work on your LCD display, then lower the video refresh rate  
to 60 Hz and set the resolution to its pre-set value.  
Contrast adjusts the difference between the image background (black level)  
and the foreground (white level).  
Brightness adjusts background black level of the screen image.  
Color Adjust provides several color adjustment modes, including preset color  
temperatures and a User Color mode which allows independent adjustment of  
red (R), green (G), and blue (B). The factory setting for this product is 6500K  
(6500 Kelvin).  
sRGB - This is quickly becoming the industry standard for color management,  
with support being included in many of the latest applications. Enabling this  
setting allows the LCD display to more accurately display colors the way they  
were originally intended. Enabling the sRGB setting will cause the Contrast and  
Brightness adjustments to be disabled.  
9300K - Adds blue to the screen image for cooler white (used in most office  
settings with fluorescent lighting).  
6500K - Adds red to the screen image for warmer white and richer red.  
5400K - Adds green to the screen image for a darker color.  
ViewSonic VA702/VA702b  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Explanation  
User Color - Individual adjustments for red (R), green (G), and blue (B).  
1. To select color (R, G or B) press button [2].  
2. To adjust selected color, pressSorT.  
3. When all color adjustments are complete, press button [1] twice.  
Information displays the timing mode (video signal input) coming from the  
graphics card in the computer, the LCD model number, the serial number, and  
the ViewSonic® website URL. See your graphics card’s user guide for  
instructions on changing the resolution and refresh rate (vertical frequency).  
NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution  
is 1280 x 1024 and the refresh rate is 60 Hertz.  
Manual Image Adjust  
H./V. Position (Horizontal/Vertical Position) moves the screen image left or  
right and up or down. Press button [2] to toggle between Horizontal and  
Vertical. The Horizontal setting moves the screen image to the left or to the  
right. The Vertical setting moves the screen image up and down.  
H. Size (Horizontal Size) adjusts the width of the screen image.  
Fine Tune sharpens the focus by aligning text and/or graphics with pixel  
boundaries.  
NOTE: Try the Auto Adjust function before using the Fine Tune control.  
Sharpness adjusts the clarity and focus of the screen image.  
ViewSonic VA702/VA702b  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Explanation  
Setup menu displays the menu shown below:  
Language select allows the user to choose the language used in the menus and  
control screens.  
Resolution Notice advises the optimal resolution to use.  
OSD Position allows the user to move the on-screen display menus and control  
screens.  
OSD Timeout sets the length of time the on-screen display screen is displayed.  
For example, with a “15 second” setting, if a control is not pushed within 15  
seconds, the display screen disappears.  
OSD Background allows the user to turn the On-Screen Display background  
On or Off.  
Memory Recall returns the adjustments back to factory settings if the display is  
operating in a factory Preset Timing Mode listed in the Specifications of this  
manual.  
ViewSonic VA702/VA702b  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Specifications  
LCD  
Type  
17” (full 17" viewable diagonal area),  
TFT (Thin Film Transistor), Active Matrix SXGA LCD,  
0.264 mm pixel pitch  
Color Filter  
RGB vertical stripe  
Glass Surface  
Anti-Glare  
Panel tilt  
+20°, -5°  
Input Signal  
Video  
Sync  
RGB analog (0.7/1.0 Vp-p, 75 ohms)  
Separate Sync  
f :30-82 kHz, f :50-85 Hz  
h
v
Compatibility  
Resolution  
PC  
Up to 1280 x 1024 Non-interlaced  
Power Macintosh up to 1152 x 870  
1
Macintosh  
Recommended  
and supported  
1280 x 1024 @ 60, 75 Hz  
1152 x 870 @ 75 Hz  
1024 x 768 @ 60, 70, 75 Hz  
832 x 624 @ 75 Hz  
800 x 600 @ 56, 60, 72, 75 Hz  
720 x 400 @ 70 Hz  
640 x 480 @ 60, 67, 72, 75 Hz  
Power  
Voltage  
100-240 VAC, 50/60 Hz (auto switch)  
Display area  
Full Scan  
337.9 mm (H) x 270.3 mm (V)  
13.3" (H) x 10.6" (V)  
Operating  
conditions  
Temperature  
Humidity  
Altitude  
32° F to + 104° F (0° C to + 40° C)  
10% to 90% (non-condensing)  
To 10,000 feet  
Storage  
conditions  
Temperature  
Humidity  
Altitude  
-4° F to + 140° F (-20° C to + 60° C)  
5% to 90% (non-condensing)  
To 40,000 feet  
Dimensions  
Physical  
Net  
378 mm (W) x 374 mm (H) x 196 mm (D)  
14.9" (W) x 14.7" (H) x 7.7" (D)  
Weight  
9.9 lb (4.5 kg)  
Regulations  
BSMI, CCC, PSB, C-Tick,  
CE, GS, Ergo, Gost-R/Hygienic, SASO,  
TCO'03 for VA702, TCO'99 for VA702b,  
®
UL/cUL, FCC-B, ICES-B, NOM, IRAM, ENERGY STAR , ENERGY  
Power saving  
modes  
On  
Off  
Normal  
<1W  
(green LED)  
(orange LED)  
®
Preset Timing Mode (pre-adjusted to VESA 1280 x 1024 @ 60 Hz)  
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in  
permanent damage to the LCD display.  
1
®
Macintosh computers older than G3 require a ViewSonic Macintosh adapter. To order an adapter, contact  
ViewSonic.  
ViewSonic VA702/VA702b  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
No power  
• Make sure power button (or switch) is ON.  
• Make sure A/C power cord is securely connected to the LCD display.  
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is  
supplying proper voltage.  
Power is ON but no screen image  
• Make sure the video cable supplied with the LCD display is tightly secured to the video  
output port on the back of the computer. If the other end of the video cable is not attached  
permanently to the LCD display, tightly secure it to the LCD display.  
• Adjust brightness and contrast.  
• If you are using an Macintosh older than G3, you need a Macintosh adapter.  
Wrong or abnormal colors  
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is  
securely connected. Loose or broken pins in the cable connector could cause an improper  
connection.  
• Connect the LCD display to another computer.  
• If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.  
Control buttons do not work  
• Press only one button at a time.  
ViewSonic VA702/VA702b  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
NOTE: You will need the product serial number.  
T = Telephone  
F = FAX  
Country/  
Region  
Website  
Email  
T= (800) 688 6688  
F= (909) 468 1202  
T= (886) 463 4775  
F= (909) 468 1202  
Canada  
T= (0800) 833 648  
F= +44 (0) 1293 643 910  
United  
Kingdom  
Europe,  
Middle East,  
Baltic  
(Contact your reseller)  
countries, and  
North Africa  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia and  
New Zealand  
Singapore,  
Southeast  
Asia, and India  
T=+ 65 273 4018  
F=+ 65 273 1566  
South Africa  
and other  
countries  
T=+886 (2) 2246 3456  
F=+886 (2) 8242 3668  
T=+886 (2) 2246 3456  
F=+886 (2) 8242 3668  
Hong Kong  
ViewSonic VA702/VA702b  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the LCD Display  
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.  
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.  
To clean the screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If the screen still not clean, apply a small amount of non-ammonia, non-alcohol based glass  
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1. Use a soft, dry cloth.  
2. If the case still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild  
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the  
LCD display screen or case. Some chemical cleaners have been reported to damage the  
screen and/or case of the LCD display.  
• ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-  
based cleaners.  
ViewSonic VA702/VA702b  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
VIEWSONIC® LCD DISPLAY  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period.  
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its  
sole option, repair or replace the product with a like product. Replacement product or parts may include  
remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic LCD displays are warranted for three (3) years for all parts including the light source and three (3)  
years for all labor from the date of the first consumer purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electrical power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonic’s specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as "image burn-in" which results when a static image is  
displayed on the product for an extended period of time.  
4. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need  
to provide your product's serial number.  
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or  
ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including the  
implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable  
for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of  
use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with  
business relationships, or other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or  
consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact  
ViewSonic or your local ViewSonic dealer.  
ViewSonic LCD Limited Warranty (V3.5)  
ViewSonic VA702/VA702b  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technicolor Thomson Stereo System CS66 User Manual
Texas Instruments Automobile Accessories TMS320VC5402 User Manual
Thermo Products Stud Sensor USDT 2004B User Manual
Toshiba CD Player SR C8002 User Manual
Toshiba Computer Drive SD M1711 User Manual
Toshiba Flat Panel Television 62HM14 User Manual
Toshiba MP3 Player MEGF60 User Manual
Vision Fitness Elliptical Trainer X6000 User Manual
VTech Games Teach in Lights Phone User Manual
Vulcan Hart Range GHX User Manual