I N S T A L L A T I O N / O P E R A T I O N
M A N U A L
HIGH DEFINITION PLASMA DISPLAYS
Models VP-5000VHD, VP-5000VHDa,
VP-6500VHD, VP-6500VHDa
and VP-103VHD
Download from Www.Somanuals.com. All Manuals Search And Download.
THREE YEAR LIMITED WARRANTY
For Plasma Displays
from Vidikron, a business of Runco International, LLC (“Vidikron”)
Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup
and care, you should enjoy many years of unparalleled video performance.
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other
important documents.
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
The following Vidikron plasma display models are covered under this Limited Warranty:
VP-5000VHD, VP-5000VHDa, VP-6500VHD, VP-6500VHDa and VP-103VHD (“Product” individually and “Products” collectively).
SERVICE LABOR: Vidikron will pay for service labor at an Authorized Service Center when needed as a result of manufacturing
defect for a period of three (3) years from the date of delivery to the initial end user (excluding the plasma glass panel).
PARTS (not including plasma glass panel): Vidikron will provide new or rebuilt replacement parts for the parts that fail due to
defects in materials or workmanship for a period of three (3) years from the effective date of delivery to the initial end user. Such
replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.
PLASMA GLASS PANEL: Vidikron will pay for service labor at an Authorized Service Center when needed as a result of a
manufacturing defect for a period of one (1) year from the effective date of delivery to the initial end user. In addition, Vidikron will
provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1)
year from the effective date of delivery to the initial end user. Such replacement parts are then subsequently warranted for the
remaining portion (if any) of the original warranty period.
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
Image burn-in on plasma display panels is specifically excluded from coverage under this Limited Warranty. Image burn-in is the
result of misuse of the Product and therefore cannot be repaired under the terms of this Limited Warranty.
Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of
time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for
this reason.
TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are left on your plasma display panel for no more than a
few minutes. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is
present on the left and right edges of the screen) are used as infrequently as possible. This will prevent permanent image burns on
your plasma display panel, which can be seen permanently under certain conditions once burn-in has occurred.
The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is
why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being
displayed continuously for an extended period of time).
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not
cover normal wear and tear nor any Product on which the serial number has been defaced, modified, or removed. This Limited
Warranty does not cover: cabinets or any appearance items; failure resulting from accident, misuse, abuse, neglect, mishandling,
misapplication, or faulty or improper installation or setup adjustments; improper maintenance; alteration; improper use of any
input signal; damage due to lightning or power line surges, spikes and brownouts; damage that occurs during shipping or transit;
damage that is attributed to acts of God; customer caused defects; or rental costs incurred due to Product failure. In the case of
remote control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under
this Limited Warranty.
Vidikron PlasmaView VHD Installation/Operation Manual
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM AUTHORIZED VIDIKRON DEALERS.
ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. MOREOVER, DAMAGE
RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE
UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN
AUTHORIZED VIDIKRON DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY
THE FINE PERFORMANCE OF WHICH YOUR VIDIKRON PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY AN
AUTHORIZED VIDIKRON DEALER.
RIGHTS, LIMITS AND EXCLUSIONS:
THE FOREGOING DESCRIBED WARRANTIES ARE THE ONLY WARRANTIES THAT APPLY TO THE PRODUCTS. VIDIKRON MAKES NO
OTHER WARRANTY OR REPRESENTATION AND HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.VIDIKRON’S
LIABILITY RELATED TO THE PRODUCT IS LIMITED TO THE COST OF THE APPLICABLE REMEDY AS NOTED ABOVE. IN NO EVENT
SHALL VIDIKRON BE LIABLE FOR:
•
DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF
USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE
WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES;
•
•
•
ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE;
ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY; OR
ANY VERBAL WARRANTY ASSURANCES MADE BY A VIDIKRON EMPLOYEE OR A VIDIKRON AUTHORIZED DEALER THAT
CONFLICTS WITH OR ENHANCES THE WRITTEN WARRANTY INCLUDED HEREIN.
EFFECTIVE WARRANTY DATE:
This Limited Warranty begins on the date of delivery to the end user. For your convenience, keep the original bill of sale as
evidence of the purchase date.
CONTACT AN AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:
Repairs made under the terms of this Limited Warranty covering your Vidikron Product will be performed at the location of the
Product, during usual working hours, provided that the location of the Product is within normal operating distance from an
Authorized Vidikron Service Center. In some instances it may be necessary for the Product to be returned to the Vidikron factory for
repairs. If, solely in Vidikron’s judgment, location of Product to be repaired is beyond normal operating distance of the closest
Authorized Vidikron Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s
responsibility to arrange for shipment of the Product for repair. These arrangements must be made through the selling Vidikron
Dealer. If this is not possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will
return Product with transportation prepaid in the United States, unless no Product defect is discovered. In that instance, shipping
costs will be the responsibility of the Product owner.
iv
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT AND TRADEMARKS:
© Copyright 2008 Runco International, LLC (“Runco”). This document contains proprietary information protected by copyright,
trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic or other means, in any form, without prior written permission of Runco.
The trademarks reporduced in this Vidikron Owner’s Manual and used on the Vidikron Products are either owned by Runco or are
licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.
THX and the THX logo are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved.
Vidikron Products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.
ADDITIONAL INFORMATION:
To locate the name and address of the nearest Authorized Vidikron Service Center, or for additional information about this Limited
Warranty, please call or write:
VIDIKRON, c/o RUNCO INTERNATIONAL, LLC
1195 NW Compton Drive
Beaverton, OR 97006-1992
Ph: (503) 748-5799
Fax: (503) 748-8161
Toll Free: (888) 4VIDIKRON (888-484-3457)
PRODUCT INFORMATION
RETAIN FOR YOUR RECORDS
_________________________________________________________
Model Purchased
________________________________________
Date
____________________________________________________________________________________________________________
Serial Number
____________________________________________________________________________________________________________
Vidikron Authorized Dealer Name
____________________________________________________________________________________________________________
Address
____________________________________________
__________________
State/Province
________________________
Postal Code
City
____________________________________________
Phone
_______________________________________________________
Fax
Vidikron PlasmaView VHD Installation/Operation Manual
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Thank you for your purchase of this quality Vidikron video product! It has been designed to provide you with the quality of video
that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the
menus and operation.
WARNING
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
may be of sufficient magnitude to constitute a risk of electric shock.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where
they exit from the apparatus.
11. Only use the attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Keep the packing material in case the equipment should ever need to be shipped.
vi
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliance Information
DECLARATION OF CONFORMITY:
Manufacturer’s Name: Runco International, LLC
Manufacturer’s Address: 1195 NW Compton Drive, Beaverton, OR 97006-1992
hereby declares that the Products’ Model Numbers:
VP-5000VHD, VP-5000VHDa, VP-6500VHD, VP-6500VHDa and VP-103VHD
conform with the provisions of:
Council Directive 2004/108/EC on Electromagnetic Compatibility;
EN 55022 “Limits and methods of measurements of radio interference characteristics of information technology equipment” 1998;
EN 55024 “Limits and methods of measurements of immunity characteristics of information technology equipment” 1998;
Including:
•
•
•
•
•
•
•
EN 61000-4-2 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic
discharge immunity test”
EN 61000-4-3 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 3: Radiated,
Radio-Frequency, Electromagnetic Field Immunity Test”
EN 61000-4-4 “Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast
transient/burst immunity test”
EN 61000-4-5 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge immunity
test"
EN 61000-4-6 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 6: Conducted
disturbances induced by radio-frequency fields immunity test"
EN 61000-4-8 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 8: Conducted
disturbances induced by power frequency magnetic fields immunity test"
EN 61000-4-11 "Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage dips,
short interruptions and voltage variations immunity tests"
And:
•
EN 61000-3-2 "Electromagnetic compatibility (EMC) Part 3, Section 2: Limits for harmonic current emissions (equipment input
current up to and including 16 A per phase)" 2000;
•
EN 61000-3-3 "Electromagnetic compatibility (EMC) Part 3, Section 3: Limitations of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A and not subject to
conditional connection" 1995;
Council Directive 2006/95/EC and amended by M1 and C1 on Low Voltage Equipment Safety;
EN 60950 “Safety of information technology equipment, including electrical business equipment”
The Technical Construction file required by this Directive is maintained at the corporate headquarters of Runco International, LLC,
located at 1195 NW Compton Drive, Beaverton, OR 97006-1992.
Date of Declaration: March 2008
Vidikron PlasmaView VHD Installation/Operation Manual
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC PART 15:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA (ICES-003):
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
PRODUCT DISPOSAL:
The Product contains small amounts of tin, lead and/or mercury. Disposal of these materials may be regulated due to
environmental considerations.
IMPORTANT RECYCLE INSTRUCTIONS
This product may contain mercury or other electronic waste that can be hazardous if not disposed of properly. Recycle
or dispose in accordance with local, state, or federal Laws.
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout the European Union and other
European countries with separate collection programs)
This symbol found on your product or on its packaging, indicates that this product should not be treated as
household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials will help to conserve
natural resources. This symbol is only valid in the European Union. If you wish to discard this product, please
contact your local authorities or dealer and ask for the correct method of disposal.
viii
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1Table of Contents
THREE YEAR LIMITED WARRANTY .......................................................................................... iii
Important Safety Instructions ................................................................................................. vi
Compliance Information ......................................................................................................... vii
1. Introduction ........................................................................................................................ 1
Description, Features and Benefits ............................................................................................................. 3
Parts List ....................................................................................................................................................... 4
2. Controls and Functions ...................................................................................................... 5
PlasmaView VHD at a Glance ........................................................................................................................ 5
Connectors................................................................................................................................................... 7
VHD Controller Front Panel ........................................................................................................................... 8
VHD Controller Rear Panel ............................................................................................................................. 9
VHD Controller Remote Control .................................................................................................................11
3. Installation ........................................................................................................................15
Remote Control ................................................................................................................................................15
Notes on Batteries ...................................................................................................................................15
Notes on Remote Control Operation................................................................................................15
Quick Setup .......................................................................................................................................................17
Installation Considerations ..........................................................................................................................18
Special Requirements for the VP-103VHD......................................................................................18
High-Altitude Operation .......................................................................................................................18
Ambient Light ...........................................................................................................................................19
Ventilation..................................................................................................................................................19
Other Considerations .............................................................................................................................21
Vidikron PlasmaView VHD Installation/Operation Manual
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to the PlasmaView VHD and VHD Controller ..............................................................22
Connecting the PlasmaView VHD to the VHD Controller .........................................................22
RS-232 Controller Connection ............................................................................................................28
Connecting 12-Volt Trigger Outputs to External Equipment..................................................28
Connecting an External IR Receiver to the VHD Controller......................................................29
Connecting AC Power............................................................................................................................30
Cable Management.................................................................................................................................31
4. Operation ..........................................................................................................................33
Turning on the Power ....................................................................................................................................33
Setting the Computer Display Properties ...............................................................................................33
Using the VHD Controller Menus ...............................................................................................................35
Main Menu ................................................................................................................................................37
Input Source .............................................................................................................................................37
Aspect Ratio ..............................................................................................................................................37
Picture .........................................................................................................................................................39
Input Position............................................................................................................................................42
Memory Presets........................................................................................................................................43
Information ...............................................................................................................................................43
Calibration..................................................................................................................................................44
Service..........................................................................................................................................................46
5. Maintenance and Troubleshooting ................................................................................51
Cleaning ..............................................................................................................................................................51
Cleaning the Display Panel Body and Remote Control..............................................................51
Cleaning the Screen................................................................................................................................51
Troubleshooting Tips .....................................................................................................................................52
6. Serial Communications ....................................................................................................55
RS-232 Connection and Port Configuration ..........................................................................................55
Serial Command Syntax ................................................................................................................................55
7. Specifications ....................................................................................................................61
PlasmaView VHD Specifications .................................................................................................................61
VHD Controller Specifications .....................................................................................................................62
PlasmaView VHD Dimensions .....................................................................................................................63
Supported Timings .........................................................................................................................................66
x
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1List of Figures
2-1. PlasmaView VP-5000VHD Front-Panel Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2-2. PlasmaView VP-6500VHD Front-Panel Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2-3. PlasmaView VP-103VHD Front-Panel Controls and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2-4. PlasmaView VHD Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2-5. VHD Controller Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2-6. VHD Controller Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3-6. HDMI Source Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3-9. Composite, S-Video and Component Video Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3-10. RS-232 Control System Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3-11. Connecting 12-Volt Trigger Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3-13. AC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4-1. VHD Controller OSD Menu Structure for PlasmaView VHD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4-5. Typical Test Pattern for Adjusting Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Vidikron PlasmaView VHD Installation/Operation Manual
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Figures
Notes:
xii
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1Introduction
This Owner’s Manual describes how to install, set up and operate a Vidikron PlasmaView VHD
High-Definition Plasma Display (Model VP-5000VHD, VP-5000VHDa, VP-6500VHD,
VP-6500VHDa or VP-103VHD).
1.1
About This Manual
Throughout this manual, the Vidikron PlasmaView VHD High-Definition Plasma Display is
referred to simply as the “PlasmaView VHD.” Except where otherwise indicated, the
information in this manual applies to all PlasmaView VHD models.
Vidikron has prepared this manual to help home theater installers and end users get the
most out of the PlasmaView VHD.
Target Audience
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
If You Have Comments About
This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify the
information and instructions provided:
Textual and Graphic
Conventions
•
•
Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT
to return to the previous menu.”
Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to 16:9,
type 16:9 <Enter>.”
•
All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>
and <Tab>.
• <Enter>indicates that you may press either the RETURN or ENTER key on your computer
keyboard if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used to
highlight important information, as in this example:
A carriage return must be used after each command or string.
Note
Vidikron PlasmaView VHD Installation/Operation Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic Conventions: These symbols appear in numerous places throughout the manual,
to emphasize points that you must keep in mind to avoid problems with your equipment or
injury:
TIPS highlight time-saving short cuts and helpful guidelines for using
certain features.
Tip
NOTES emphasize text with unusual importance or special significance.
They also provide supplemental information.
Note
CAUTIONS alert users that a given action or omitted action can degrade
performance or cause a malfunction.
Caution
WARNINGS appear when a given action or omitted action can result in
damage to the equipment, or possible non-fatal injury to the user.
WARNING
DANGER!
DANGER appears when a given action can cause severe injury or death.
Use the following table to locate the specific information you need in this manual.
1.2
Using This Manual
If you need...
... Turn to page:
Information about obtaining service
General information about the PlasmaView VHD
High-Definition Plasma Display
Installation instructions
First-time configuration instructions
Advanced configuration instructions
Troubleshooting tips
Specifications for the PlasmaView VHD
High-Definition Plasma Display
2
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The PlasmaView VHD High-Definition Plasma Display establishes a higher threshold for flat
panel display products. The PlasmaView VHD is available in three sizes, including our largest
and highest-resolution plasma ever, at 103 inches diagonal and 1920 x 1080 (1080p) native
resolution.
1.3
Description, Features and
Benefits
The PlasmaView VHD takes picture quality to a whole new level, boasting our brightest
picture, best contrast ratio, deepest black levels and most spot-on high definition
colorimetry ever! In addition, sophisticated 16-bit digital video processing, a new milestone,
results in 4096 steps of graduation for seamless images, completely devoid of the primitive
“solarization” and “stair stepping” characteristics previously plaguing digital flat panel
displays.
Discrete, multiple aspect ratio control includes IntelliWide™ for viewing 4:3 content in
widescreen without appreciable picture degradation, as well as ISF(ccc) calibration modes to
easily maintain ISF standards. The automation interface includes RS-232 control with discrete
aspect ratio, input and power on/off selection.
The included VHD Digital Video Controller/Processor provides a pure digital signal path from
input to output as well as a broad array of video input choices, all available from its position
in the equipment rack, with only digital video and control cables running to the display itself.
The PlasmaView VHD not only represents a leap forward in high definition flat-panel
technology, but our engineering advances in plasma design ensure that it will enjoy a long
life in any installation, with operation extending to as much as 60,000 hours. At less than
5-3/4 inches thin, the PlasmaView VHD provides unlimited installation flexibility as well.
For high-altitude installations, Vidikron also offers the VP-5000VHDa and VP-6500VHDa with
industry-leading high-altitude compliance to over 9,000 feet mean sea level (MSL). The
VP-5000VHDa and VP-6500VHDa share all other features and specifications with the
VP-5000VHD and VP-6500VHD.
The PlasmaView VHD offers these key features and benefits:
Key Features and Benefits
•
•
•
•
•
•
•
16:9 Native Resolution: 1920 x 1080
Multiple Aspect Ratios with IntelliWide™ Mode
Includes the new VHD video controller/processor
Less than 5-3/4 inches thin
Models VP-5000VHDa and VP-6500VHDa are high-altitude compliant to over 9,000 feet
Exceptional detail and artifact-free video enhancement
Imagix™ video processing with 3:2 film detection circuitry
Vidikron PlasmaView VHD Installation/Operation Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Your PlasmaView VHD is shipped with the following items. If any items are missing or
damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888)
4VIDIKRON (484-3457).
➤
•
•
•
•
•
•
•
•
•
PlasmaView VHD High-Definition Plasma Display
AC Power Cords (2)
Remote Control Unit and two (2), AAA-size batteries
RJ-11 Telephone Cable, 50 feet (15.24 meters)
Serial Port Adapter, RJ-11 Female to DB-9 Female
Rack-mount hardware for the VHD Controller
Cable Ties (2)
Warranty information and registration card
Vidikron PlasmaView VHD Installation/Operation Manual (this document)
Optional Accessories – Models VP-5000VHD and VP-5000VHDa:
•
•
Wall Mount Kit (part number 956-0273-00)
Table Stand (part number 956-0266-00)
Optional Accessories – Models VP-6500VHD and VP-6500VHDa:
•
•
Wall Mount Kit (part number 956-0253-00)
Table Stand (part number 956-0254-00)
Optional Accessories – Models VP-103VHD:
•
•
Wall Mount Kit (part number 997-5371-00)
Floor Stand (part number 997-5269-00)
4
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2Controls and Functions
2.1
PlasmaView VHD at a
Glance
Controls and Indicators
indicators.
(behind
front bezel)
2
4
3
1
Figure 2-1. PlasmaView VP-5000VHD Front-Panel Controls and Indicators
3
4
2
(behind
front bezel)
1
Figure 2-2. PlasmaView VP-6500VHD Front-Panel Controls and Indicators
Vidikron PlasmaView VHD Installation/Operation Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
2
1
Figure 2-3. PlasmaView VP-103VHD Front-Panel Controls and Indicators
1. DISPLAY STAND
Optional accessory for table-top installations.
2. POWER BUTTON
Connects or disconnects the display panel from the AC power source.
3. STANDBY/ON INDICATOR
- Lights green to indicate normal operation;
- Lights red to indicate that the PlasmaView VHD is in standby mode.
4. REMOTE CONTROL SENSOR
Receives the signals from the remote control.
6
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2-4 shows the rear-panel connector locations on the PlasmaView VHD.
Connectors
VP-5000VHD
5
VP-6500VHD
5
VP-103VHD
5
A
B
AUDIO
AV IN
SLOT1
SLOT2
PC IN
SERIAL
1
2
3
4
Figure 2-4. PlasmaView VHD Rear Panel
Vidikron PlasmaView VHD Installation/Operation Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SLOT 1
Not used.
2. SLOT 2 (Dual HDMI input)
HDCP-compliant digital video inputs. Connect the HDMI output from the VHD
Controller to input “A” in this slot.
3. PC IN
Not used.
4. RS-232C (9-pin, male D-Sub)
Connect the RS-232 OUT port on the VHD Controller to this input.
5. POWER INPUT
Connect the PlasmaView VHD to AC power here.
Figure 2-5 shows the controls and indicators on the VHD Controller front panel; the
paragraphs that follow describe them.
2.2
VHD Controller Front
Panel
Component SD NTSC
16:9
480i
VP-VHD
1
2
3
Figure 2-5. VHD Controller Front Panel
1. POWER BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to standby
mode. For a discrete on or off command, you can use the direct access buttons on the
remote control.
2. IR SENSOR
Receives IR commands from the remote.
3. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu
or – if no menu is selected – the current source, signal format (NTSC or PAL), input
resolution and aspect ratio.
8
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2-6 shows the rear connector panel on the VHD Controller.
2.3
VHD Controller Rear Panel
7
9
3
SYSTEM CONTROL INTERFACE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Serial No
INPUTS
B/Pb
!
R/Pr
G/Y
H
V
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
HD1
HD2
1
3
IR
Model
Video Processor / Controller
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
R/Pr
G/Y
B/Pb
H
V
Pb
Pr
Y
S-Video 1
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
HDMI Out
HDMI 1
HDMI 2
Component Video
Video
S-Video 2 RS-232 Out
RS-232 Control
1
2
8
10
11
4
5
6
12
13
Figure 2-6. VHD Controller Rear Panel
1. HDMI OUT
Outputs
2. HDMI 1 / HDMI 2 (Digital)
Inputs
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with
a DVI or HDMI output.
3. HD1 / HD2 (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting either RGB or component
high-definition television signals. The VHD Controller automatically detects the signal
format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.
4. COMPONENT VIDEO (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
For best results, do not run your DVD player in progressive mode.
Tip
5. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, laser disc player or other
composite video source.
6. S-VIDEO 1 / S-VIDEO 2
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super
VHS (S-VHS) VCR.
7. 12-VOLT (750 mA) TRIGGER OUTPUTS
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens or screen masks.
8. ComLink (RS-232) OUTPUT
Connect this to the ComLink (RS-232) input on the projector, using the provided
communication cable.
Vidikron PlasmaView VHD Installation/Operation Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9. IR
Wired input from a wired remote control or infrared receiver. It is a 3.5-mm, mini phono
jack, wired as follows:
Ring = +5V
Tip = IR Input
Sleeve = Ground
When an external remote control or infrared receiver is connected to the
wired IR input, the IR sensor on the front of the VHD Controller is disabled.
Note
10. RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
11. POWER INPUT (100 to 240 VAC)
Connect the VHD Controller to power here.
12. MAIN AC FUSE
This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow).
13. MAIN POWER SWITCH
Disconnects or applies power to the VHD Controller.
10
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2-7 shows the VHD Controller remote control, and the paragraphs that follow describe
its functionality.
2.4
VHD Controller Remote
Control
1
2
3
4
5
7
6
(“CUST 2” on
some models)
8
9
10
11
12
13
14
16
15
17
18
19
22
20
21
Figure 2-7. VHD Controller Remote Control
Vidikron PlasmaView VHD Installation/Operation Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. LIGHT
Press to illuminate the buttons.
3. ON / OFF
Press to turn the projector on or off.
4. ENT (Enter)
Press to select a highlighted menu item or confirm a changed setting.
On some remote control units, this button is where the RETURN/EXIT
button (item #6) appears here.
Note
5. Cursor Buttons (
,
,
,
)
Use these buttons to select items or settings, adjust settings or switch display patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = 16:9 - 4:3 - Letterbox - IntelliWide - Cinema
DOWN Button = Cinema - IntelliWide - Letterbox - 4:3 - 16:9
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this
order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -
S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB
2 - HDMI 1 - HDMI 2
6. RETURN/EXIT
Press this button to exit the current menu and return to the previous one, or to cancel an
operation.
On some remote control units, the ENT (Enter) button (item #4) is in this
location.
Note
7. MENU
Press this button to access the OSD controls.
12
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Preset Buttons:
8. ISF NT (Night)
Press to recall settings for the current input from the “ISF Night” memory preset.
9. ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
10. THX (VP-6500VHD) / CUST 2 (all other models)
Press to recall settings for the current input from the “Custom 2” or “THX” memory
preset.
11. CUST 1
Press to recall settings for the current input from the “Custom 1” memory preset.
12. VIDEO (1)
Press to select Composite video input as the source or to enter the numeric character “1.”
13. S-VID 1 (2) / S-VID 2 (5) (S-Video)
Press to select an S-Video input or to enter the numeric character “2” or “5.”
14. COMP (Component) (3)
Press to select Component SD (480i/576i) video input as the source or to enter the
numeric character “3.”
15. HD 1 (4) / HD 2 (7)
Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric
character “4” or “7.”
16. HDMI 1 (6) / HDMI 2 (8)
Press to select a Digital Video input or to enter the numeric character “6” or “8.”
Aspect Ratio Selection Buttons:
Use these buttons to select an aspect ratio directly or to enter numeric characters, as follows:
17. 16:9 (9)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
18. 4:3 (0)
Scales the input signal to fit 4:3 display mode in the center of the screen.
19. LETBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
20. I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
21. CINEMA
For viewing 2.35:1 source material.
22. SVC
Not used.
Vidikron PlasmaView VHD Installation/Operation Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
14
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3Installation
To install batteries in the remote control:
3.1
Remote Control
1. Press down the tab on the cover and pull the cover in the direction of the arrow.
2. Insert the included batteries. Ensure that the polarities correctly match the
markings inside the battery compartment.
and
3. Insert the lower tab of the cover into the opening, and press down the cover until it clicks
in place.
•
•
•
When installing batteries, make sure that the battery polarities are correct.
Do not mix an old battery with a new one or different types of batteries.
Notes on Batteries
If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
The remote control can be used to control the PlasmaView VHD within the ranges shown in
Notes on Remote Control
Operation
Component SD NTSC
16:9
480i
Approx.
7m/23ft
LIGHT
ON
OFF
ENT
RETURN
EXIT
MENU
MEMORY
ISF
NT
ISF
DA
CUST
1
CUST
2
Y
SOURCE SELECTION
S-VID
1
VIDEO
1
COMP
3
2
HD
1
S-VID
2
HDMI
1
4
5
6
HD
2
HDMI
2
7
8
ASPECT
4x3
LET
ANA
BOX
I-WIDE
CINEMA
SVC
Figure 3-1. Available Range of the Remote Control
Vidikron PlasmaView VHD Installation/Operation Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not drop the remote control or expose it to moisture or high temperature.
The remote control may malfunction under a fluorescent lamp. If that occurs, move the
plasma display away from the fluorescent lamp.
•
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the plasma display.
The signal from the remote control can be reflected by walls or other
surfaces.
Note
•
•
If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the plasma display and repeat the operation.
16
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-1 gives a quick overview of the PlasmaView VHD installation process. The sections
following this one provide detailed instructions.
3.2
Quick Setup
Installation should be performed by a qualified custom video installation
specialist.
Note
Table 3-1. Installation Overview
For Details, refer to
page...
Step
Procedure
Mount the PlasmaView VHD on a wall or table stand
Connect the VHD Controller to the PlasmaView VHD
Connect signal sources to the VHD Controller
1
2
3
Connect external controller to VHD Controller RS-232 port
(optional)
4
5
6
Apply power to the PlasmaView VHD
If using the PlasmaView VHD with a computer, adjust
computer display properties
Display calibration: adjust the following for analog inputs;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
7
8
• White Balance
Repeat Step 7 for digital inputs
Vidikron PlasmaView VHD Installation/Operation Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Proper installation of your PlasmaView VHD will ensure the highest possible picture quality,
protect your investment and prevent personal injury. Whether you are installing the
PlasmaView VHD temporarily or permanently, you should take the following into account to
ensure that it performs optimally.
3.3
Installation Considerations
Special Requirements for the
VP-103VHD
The extremely large size and high power consumption of the VP-103VHD place unique
demands upon both the installation personnel and the installation site, over and above
those of the 50-inch and 65-inch PlasmaView VHD models.
➤
Installing the VP-103VHD requires the following:
•
•
•
•
•
Several people familiar with complex mechanical installations.
Specialized equipment.
A dedicated 220VAC circuit.
A “carry-in” path with sufficient clearances.
An installation location that can support the weight of both the plasma panel and
mounting hardware (floor pedestal or wall mount).
Before proceeding with a VP-103VHD installation, make sure you understand these
requirements and have confirmed that the site can meet them.
High-Altitude Operation
Due to inherent limitations of plasma technology, and the interaction between ambient air
pressure and the plasma gases contained inside of the panel, reliable operation of your
plasma display cannot be assured during operation at certain high-altitude locations.
➤
Vidikron has found the VP-5000VHD and VP-6500VHD to operate reliably at altitudes of up to
7,800 feet MSL (mean sea level). The VP-5000VHDa and VP-6500VHDa have been found to
operate reliably at altitudes of up to 9,100 feet MSL.
At higher elevations, each panel may react differently, depending upon the altitude, air
pressure, humidity and other meteorological factors. If you are planning to use this product
at a location above 9,000 feet, please contact Vidikron technical support for further
information.
Mounting the PlasmaView
VHD on a Wall or Table
Stand/Floor Pedestal
To install the PlasmaView VHD, you will need either an optional table stand, floor pedestal or
wall-mounting kit. (The VP-103VHD must be either wall-mounted or attached to a floor
pedestal.)
➤
If you do decide to wall-mount the PlasmaView VHD, ensure that the wall-mount bracket is
installed according to the instructions included with it. The wall must be capable of
supporting a redundant weight factor five (5) times the weight of the display, or be
reinforced.
Vidikron recommends that this be done by a custom installation specialist.
Use only a Vidikron-approved wall-mount kit, table stand or floor
pedestal that is specifically designed for your display. Refer to Parts List
Note
on page 4 for ordering information.
18
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
You can attach your optional mounts or stand to the PlasmaView VHD in either of two ways:
•
While it is upright.
•
As it lies flat with the screen face
down. Place the protective sheet,
which was wrapped around the
plasma monitor when it was
packaged, between the screen and
your work surface to avoid
scratching or otherwise damaging
the screen surface.
In general, minimize or eliminate light sources directed at the display. Contrast ratio in your
images will be noticeably reduced if light directly strikes the display, such as when a shaft of
light from a window or floodlight falls on the image. Images may then appear washed out
and less vibrant.
Ambient Light
Ventilation
If you are mounting the PlasmaView VHD in an enclosure, leave sufficient space on all sides
disperse, maintaining the proper operating temperature.
Vidikron PlasmaView VHD Installation/Operation Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall
50mm (2")
50mm (2")
Wall
50mm (2")
Figure 3-2. Ventilation Requirements for Enclosure Mounting (VP-5000VHD and
VP-6500VHD)
Wall
300mm
(11.8")
300mm
(11.8")
Wall
200mm
(7.87")
Figure 3-3. Ventilation Requirements for Enclosure Mounting (VP-103VHD)
20
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Other considerations and tips that can help improve your installation, avoid damage and
prolong operating life:
Other Considerations
•
•
•
Keep the ambient temperature constant and below 35°C (95°F). Keep the display away
from heating and/or air conditioning vents. Changes in temperature may cause drifts in
the display circuitry, which may affect performance.
Keep the PlasmaView VHD away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors, speakers,
power amplifiers and elevators.
Handle the unit carefully when installing or carrying it. Use the built-in handles; DO NOT
touch or hold the screen face.
•
•
Set the unit away from heat, excessive dust, and direct sunlight.
Protect the inside of the unit from liquids and small metal objects. In case of accident,
unplug the power cord and have it serviced by an authorized Service Center.
•
•
Do not hit or scratch the panel surface as this causes flaws on the surface of the screen.
For correct installation and mounting it is strongly recommended to use a trained,
authorized dealer.
•
To avoid sulfurization, it is strongly recommended not to place the unit in a dressing room
in a public bath or hot spring bath.
Vidikron PlasmaView VHD Installation/Operation Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Proceed as follows to connect the PlasmaView VHD to the VHD Controller, your video
sources, external controller(s) – if present – and AC power.
3.4
Connections to the
PlasmaView VHD and VHD
Controller
When connecting your equipment:
•
•
•
Turn off all equipment before making any connections.
Use the correct signal cables for each source.
Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
Connecting the PlasmaView
VHD to the VHD Controller
the sections that follow.
➤
PlasmaView VHD
Rear Panel
(VP-6500VHD shown
here)
A
B
AUDIO
AV IN
SLOT1
SLOT2
PC IN
SERIAL
Optional Terminal
Board Insert Slot
(covered)
SYSTEM CONTROL INTERFACE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Serial No
INPUTS
B/Pb
!
R/Pr
G/Y
H
V
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
HD1
HD2
1
3
IR
Video Proller
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
R/Pr
G/Y
B/Pb
H
V
SDI
Pb
Pr
Y
S-Video
S-Video
1
2
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
HDMI Out
HDMI
1
HDMI
2
Option
Component Video
Video
RS-232 Out
RS-232 Control
HDMI OUT
RS-232
OUT
Figure 3-4. Connecting the PlasmaView VHD to the VHD Controller
Digital Video Connection: The PlasmaView VHD has a dual HDMI input board, labeled
HDMI (SLOT 2). Connect the HDMI output from the VHD Controller to input “A” on this
board, using an HDMI-to-HDMI cable.
22
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Connection: Connect the RS-232 output from the VHD Controller to the SERIAL
input on the PlasmaView VHD. Use a standard, modular telephone cable with RJ11 plugs at
both ends. On the PlasmaView VHD end, use the provided RJ11-to-DB9 adapter. This adapter
XMT DATA
RCV DATA
SIG GND
RCV DATA
XMT DATA
3
2
5
4
3
PlasmaView
1
5
SIG GND
2, 5
To/From
VHD
Controller
6
9
REQUEST TO SEND
CLEAR TO SEND
8
7
SERIAL
NO CONNECTION
1, 6
1, 9
DB-9 Female
RJ-11 Male
Figure 3-5. RS-232 Connection from the VHD Controller to the PlasmaView VHD
Vidikron PlasmaView VHD Installation/Operation Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Source
Components to the VHD
Controller
Connect your video sources to the VHD Controller as shown and described in the sections
that follow.
➤
HDMI Connections: See Figure 3-6.
Use the HDMI inputs whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
Tip
INPUTS
R/Pr
G/Y
B/Pb
H
V
TRIGGERS
2
HD1
HD2
1
3
IR
R/Pr
G/Y
B/Pb
H
V
Pb
Pr
Y
S-Video 1
HDMI 1
HDMI 2
Component Video
Video
S-Video 2
HDMI Source
(HD-DVD/BD/DVD Player or
HD Tuner with
HDMI or DVI out)
Figure 3-6. HDMI Source Connections
24
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUTS
R/Pr
G/Y
B/Pb
H
V
TRIGGERS
2
HD1
HD2
1
3
R/Pr
G/Y
B/Pb
H
V
S-Video 1
HDMI 1
HDMI 2
Pb
Pr
Y
Video
S-Video 2
Component Video
Red/Pr Green/Y Blue/Pb
Horiz
Vert
DTV or Progressive
Component (YPbPr)
Source
Figure 3-7. Digital (DTV) RGB Connections
Vidikron PlasmaView VHD Installation/Operation Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Analog (Computer) RGB Connections: See Figure 3-8.
computer signals compatible with the PlasmaView VHD. Use with
signals other than those listed may cause some functions not to work.
Note
2. Some Macintosh computers may require a Macintosh video adapter.
Contact your nearest authorized service center or dealer.
INPUTS
R/Pr
G/Y
B/Pb
H
V
TRIGGERS
2
HD1
HD2
1
3
R/Pr
G/Y
B/Pb
H
V
S-Video 1
HDMI 1
HDMI 2
Pb
Pr
Component Video
Y
Video
S-Video 2
Red Green Blue Horiz Vert
Personal Computer
Figure 3-8. Analog RGB Connections
26
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Composite/S-Video/Component Video Connections: See Figure 3-9.
INPUTS
R/Pr
G/Y
B/Pb
H
V
TRIGGERS
2
HD1
HD2
1
3
R/Pr
G/Y
B/Pb
H
V
S-Video 1
HDMI 1
HDMI 2
Pb
Pr
Component Video
Y
Video
S-Video 2
Pb Pr
Y
DVD Player, VCR,
Satellite Receiver,
Laser Disc etc.
Figure 3-9. Composite, S-Video and Component Video Connections
Vidikron PlasmaView VHD Installation/Operation Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Controller
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
➤
5
4
3
1
2
TRIGGERS
2
6
9
8
7
1
3
IR
Pb
Pr
Y
S-Video 1
2 Transmit Data
3 Receive Data
5 Ground
Component Video
Video
S-Video 2 RS-232 Out
RS-232 Control
(none of the other pins are used)
to Automation/
Control System
or PC
Figure 3-10. RS-232 Control System Connection
Connecting 12-Volt Trigger
Outputs to External
Equipment
If your home theater contains equipment that responds to 12-Volt triggers, connect it to the
➤
TRIGGERS
1
2
3
IR
Pb
Pr
Y
S-Video 1
Component Video
Video
S-Video 2 RS-232 Out
RS-232 Control
3.5-mm
mini plug
to 12-Volt
trigger-activated
equipment
Sleeve = Ground
Tip = +12V
Figure 3-11. Connecting 12-Volt Trigger Outputs
28
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
If infrared signals from the remote control cannot reach the VHD Controller due to excessive
distance or obstructions such as walls or cabinet doors, you can connect an external IR
Connecting an External IR
Receiver to the VHD
Controller
SYSTEM CONTROL INTERFACE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
TRIGGERS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
1
2
3
IR
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
S-Video
S-Video
1
2
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA
Video
RS-232 Out
RS-232 Control
Ring = +5V
Tip = IR Input
IR Receiver
Sleeve = Ground
Remote
Control
(3.5-mm
mini phono
plug)
Figure 3-12. External IR Receiver Connection
When an external IR receiver is connected to the wired IR input, the
built-in IR sensor on the VHD Controller is disabled.
Note
Vidikron PlasmaView VHD Installation/Operation Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting AC Power
Plug the female end of the power cord into the AC receptacle on the rear of the PlasmaView
VHD. Connect the other end to your AC power source. (The VP-103VHD requires
200 – 240 VAC.)
➤
VP-5000VHD
VP-6500VHD
VP-103VHD (NOTE: The VP-103VHD requires 200 - 240 VAC)
Figure 3-13. AC Power Connection
Similarly connect the VHD Controller to a nearby AC outlet.
30
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
To reduce cable clutter, use the cable clamps provided with the PlasmaView VHD to bundle
the video, audio and control cables at the back of the display. Install the clamps as shown in
Cable Management
Securing the AC cord to the rear of the panel (VP-5000VHD)
1. Open the clamp.
2. Insert the AC cord
and close the clamp
securely.
3. Slide the clamp upward
to secure the AC cord.
4. Insert the end of the
clamp band into the
small hole on the lower
right of
To loosen
the clamp:
the back
cover.
Clamp
AC cord
Note: The power plug provided with your panel may differ from the one shown here.
Securing the AC cord to the rear of the panel (VP-6500VHD)
To close:
1
Connect the AC cord plug to
the panel.
2
3
Attach the left clamp.
Attach the right clamp.
Push until the hook clicks.
1
3
2
To open:
Squeeze the tabs together
and pull out.
Note: The power plug provided with your panel may differ from
the one shown here.
Securing the AC cord to the rear of the panel (VP-103VHD)
To close:
Unplug the AC cord
Push until the
hook clicks.
To open:
Plug the AC cord into the power inlet on the
panel until it clicks.
Squeeze the
tabs together
and pull out.
Attach the clamp.
Press the two tabs together
and pull out.
Note: Make sure that the AC cord is locked.
Using Cable Ties
Pass the cable fixing
band through the clip
as shown.
To secure cables connected to the panel, wrap the cable tie around them.
Then, pass the pointed end through the locking block as shown. Ensure that there is
sufficient slack in the cables to minimize stress, especially in the power cord.
To tighten:
To loosen:
Push the catch
Pull
Pull
1
2
Figure 3-14. Cable Management
Vidikron PlasmaView VHD Installation/Operation Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
32
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4Operation
1. Turn on your source components.
4.1
Turning on the Power
standby/on indicator lights green.
position.
4. Press the ON button on the remote control to turn
on the VHD Controller and PlasmaView VHD (or
press the power button on the front of the VHD
LIGHT
Controller). The power indicator on the VHD
Controller lights solid blue.
ON
OFF
5. After a brief warm-up period (approximately 10
seconds), the PlasmaView VHD will display an
image.
To maximize image quality when using the PlasmaView VHD with a personal computer, you
may need to adjust the display properties of your computer’s video card. To do this on a
Microsoft® Windows®-based PC:
4.2
Setting the Computer
Display Properties
1. Choose Settings from the Windows Start
Menu and click on “Control Panel.”
Vidikron PlasmaView VHD Installation/Operation Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Set the Screen area to 1024x768 pixels.
5. Click the Advanced button and click the
Monitor tab on the dialog box. Set the
Refresh Frequency to 60Hz and click OK.
1. The native resolution of the PlasmaView VHD is 1920 x 1080. Other
horizontal or vertical resolutions may be scaled upward or downward
to fit the display.
Note
2. With most computers, you can get the best picture at 1024 x 768 @
60Hz.
To prevent image retention (burn) on your display, ALWAYS use a screen
saver and set it to the shortest possible time.
WARNING
34
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button on either the remote control or the VHD Controller front panel to
display the Main Menu. To select a menu item, use the UP ( ) and DOWN ( ) buttons on
either the remote control or the VHD Controller front panel to highlight it. Press ENTER to
confirm your selection.
4.3
Using the VHD Controller
Menus
The PlasmaView VHD OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and signal characteristics, some menu options may
not be available.
When the input signal resolution is 1080i analog (via the HD1 or HD2
input) or lower, the menus appear both on-screen and on the front-panel
display of the VHD Controller as you navigate them:
Note
Input Source
↑
Aspect Ratio
↓
When the input signal resolution is 1080i digital or 1080p (via the HDMI1
or HDMI2 input), the menus appear on the front-panel display only.
Vidikron PlasmaView VHD Installation/Operation Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Gain
Composite
S Video 1
Offset
Gamma
Color Temp.
AGC
S Video 2
ISF Night - Display Color
Component SD
HD/RGB 1
HD/RGB 2
HDMI 1
Input Source
Input Level
Brightness
Contrast
Color
HDMI 2
ISF Night - Input Image
ISF Night - Input Color
16:9
Tint
4:3
Sharpness
Gain
Letterbox
IntelliWide
Cinema
Aspect Ratio
Picture
Offset
Chroma Delay
Phase
Brightness
Contrast
Noise Filter
Gain
Color
Tint
Offset
Sharpness
Left/Right
Up/Down
Width
Gamma
Color Temp.
AGC
ISF Day - Display Color
ISF Day - Input Image
Input Position
Input Level
Brightness
Contrast
Color
Height
Calibration
Overscan
(1080i analog and
Recall ISF Night
Recall ISF Day
Recall or Save Custom 1
Recall or Save THX/Custom 2
lower-resolution sources)
Tint
Memory Presets
Sharpness
Gain
Reset Custom 1 and THX/Custom 2 to
Factory Default
Offset
Serial Number
Hardware
Firmware
Date
ISF Day - Input Color
Save ISF Settings
Output Shift
Chroma Delay
Phase
Information
(read-only)
Noise Filter
Back / Confirm
Left/Right
Up/Down
Width
Height
Save
Owner Name
ISF Calibrated
ISF Other
Grey Bars 1
Splash Configure
OSD Position
Grey Bars 2
Test Video
Vidikron/ISF Logo Splash
Screen Timers
(2 ... 60 sec.)
Color Bars 1
Color Bars 2
Rename, Restore or Save
Primary
Input Names
Vert./Horiz., Normal/Wide,
Height
Remote Control
Secondary
Left/Right, Up/Down, Width, Height
Display Position
Pix By Pix
(Enable/Disable; 1080i/p sources only)
Brightness, Contrast, Color, Tint
Sharpness, Color Temp.
AGC, Input Level
Display Device
Display Image
(1080i digital or 1080p
sources only)
Red Gain, Blue Gain, Green Gain
Red Offset, Blue Offset, Green Offset
Gamma
Service
HD/RGB 1
Auto, RGB or YUV
HD/RGB 2
HD Format
Triggers
ADC Bandwidth
YPbPr Input Resolution
1 / 2 / 3 / Save
Language
Auto, 75 MHz, 150 MHz or 300 MHz
Auto, 480i/p, 576i/p, 720p or 1080i
(currently, English only)
Menu Mode
Miscellaneous
Timeout
Side Bar Color
Film Mode (SD src. only)
System Reset
Restore Saved Settings
Figure 4-1. VHD Controller OSD Menu Structure for PlasmaView VHD
36
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Main Menu is the starting point for accessing all display functions.
Main Menu
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
Vidikron Video
From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Composite is the
active source.
Composite
>
S-Video 1
S-Video 2
Component SD
HD/RGB 1
HD/RGB 2
HDMI 1
HDMI 2
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from
the Main Menu and press ENTER. Select the appropriate aspect ratio for your screen size and
Aspect Ratio
16:9
4:3
7
ꢀ
ꢀ
ꢀ
ꢀ
The currently-selected aspect ratio is indicated by a “7” to its left; in this example, 16:9 is
selected.
Letterbox
IntelliWide
Cinema
The aspect ratio selection is automatically saved for each input and
Note
resolution.
Vidikron PlasmaView VHD Installation/Operation Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 4-1. Aspect Ratio Settings
Remote
Aspect Ratio
Control
Key
Description
16:9
16:9
Select 16:9 to view 16:9 DVDs and
HDTV programs in their native
aspect ratio.
16:9 Image on
16:9 Screen (Display)
4:3 images are stretched
horizontally to fit a 16:9 screen.
4:3 Image, stretched to fill
16:9 Screen (Display)
4:3
4:3
4:3 scales the input signal to fit in
the center of the 16:9 screen. 4:3
is the aspect ratio used by
4:3 Image on
computer monitors, standard
television programming and
most VHS video cassettes.
16:9 Screen (Display)
Letterbox
LET
BOX
Letterbox mode scales (zooms in
on) a 4:3 image linearly (by the
same amount on all sides) to fill a
16:9 display.
Letterbox is best suited for
viewing LaserDisc movies or
non-anamorphic DVDs on a 16:9
screen.
4:3 Image on
16:9 Display
(Letterbox aspect ratio)
IntelliWide
I-WIDE
IntelliWide scales a 4:3 image
NON-linearly (more on the sides
than in the center) to fit a 16:9
screen.
4:3 Image on
16:9 Screen
with IntelliWide
Cinema
CINEMA
Select Cinema to view 2.35:1
source material on a 16:9 screen.
The upper and lower portions of
the screen are masked, but the
geometry of the active image
area is not changed.
2.35:1 Image on
16:9 Screen
38
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the controls in the Picture Menu to calibrate the analog inputs on the PlasmaView VHD
for optimum picture quality.
Brightness
Contrast
Color
To calibrate the digital (HDMI 1 and HDMI 2) inputs, use the Display
Image controls in the Service menu. For more information, refer to
Note
Tint
Sharpness
The PlasmaView VHD has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that
setup and calibration be performed by an ISF-certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each VHD
Controller input separately.
When you change a picture quality setting, save the change to a preset
Note
afterwards. Otherwise, the change will be lost when a different input is
selected. (Picture quality settings are saved for each input separately.) For
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Vidikron recommends using the following calibration tools for
best results:
•
External test pattern source – Ovation Multimedia, Video Essentials or AVIA test DVD (or
equivalent).
•
A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that you are calibrating and proceed as follows.
Perform the adjustments in the order listed here.
Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an
pattern.
Below Black
Above Black
Figure 4-2. Typical PLUGE Pattern for Adjusting Brightness
Vidikron PlasmaView VHD Installation/Operation Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
PLUGE patterns vary but generally consist of some combination of black, white and gray
areas against a black background. The example above includes two vertical bars and four
shaded boxes.
Select Brightness from the Picture menu and press ENTER. Adjust the brightness so that:
•
•
•
•
•
The darkest black bars disappear into the background.
The dark gray areas are barely visible.
The lighter gray areas are clearly visible.
The white areas are a comfortable level of true white.
The image contains only black, gray and white (no color).
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the
Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast and press ENTER. Adjust the contrast to a point just below which the white
rectangle starts to increase in size.
Brightness and contrast controls are interactive. A change to one may
require a subtle change to the other in order to achieve the optimum
setting.
Note
40
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Saturation: On your external test pattern source, select a color bar pattern like the one
Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint
Select Color and press ENTER. While looking at the color bar pattern through a blue filter,
adjust the color saturation level until the outermost (gray and blue) color bars appear to be a
single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener. To set the tint, select Tint and press ENTER. While looking at the color bar pattern
through a blue filter, adjust the tint level until the cyan and magenta color bars (on either
side of the green bar) appear to be a single shade of blue.
Like the brightness and contrast controls, the color and tint controls are
interactive. A change to one may require a subtle change to the other in
order to achieve the optimum setting.
Note
Vidikron PlasmaView VHD Installation/Operation Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust
sharpness, select Sharpness from the Picture menu and press ENTER. On your external test
for white edges around the transitions from black to gray and differently-sized lines in the
“sweep” patterns at the top and bottom. Lower the sharpness setting to eliminate them.
Figure 4-5. Typical Test Pattern for Adjusting Sharpness
Use the controls in the Input Position Menu to fine-tune the aspect ratio and image position
for the current source.
➤
Left/Right
Up/Down
Width
The input position settings are automatically saved for each input and
resolution.
Note
Height
Overscan
Left/Right: Select Left/Right from the Input Position menu to shift the projected image
horizontally. Use the right or up cursor button to shift the image to the right; use the left or
down button to shift it to the left.
Up/Down: Select Up/Down from the Input Position menu to shift the projected image
vertically. Use the right or up cursor button to shift the image upward; use the left or down
button to shift it downward.
Width: Select Width from the Input Position menu to change the projected image width. Use
the right or up cursor button to increase the width; use the left or down button to decrease it.
Height: Select Height from the Input Position menu to change the projected image height.
Use the right or up cursor button to increase the height; use the left or down button to
decrease it.
42
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Overscan: Image Overscan pushes the outside edge of the active picture area of the video
signal out beyond the edge of the display area.
Some television programs are produced based on the assumption that older television sets
may not display the outer edges of the broadcast picture area. Over scan effectively trims
away these inactive, outer edges and enlarges the remaining portion of the image to fill the
display area.
Select from 1% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.
For each input, the PlasmaView VHD lets you save image quality settings as presets that you
can recall at a later time. You can create up to four presets per input and resolution. Use the
Memory Presets menu to recall saved image presets, or to save image settings in the
“Custom 1” or “Custom 2” memory location.
ISF Night
7
ISF Day
ꢀ
ꢀ
ꢀ
On the VP-6500VHD, “Custom 2” is labeled “THX.”
Note
Custom 1
Save
Save
Custom 2 / THX
The currently-selected preset is indicated by a “7” to its left; in the example shown here, ISF
Night is selected.
Factory Default
You should save changes to any of the following settings to a preset; otherwise they will be
lost when a new input source or resolution is selected:
•
•
•
•
•
Brightness
Contrast
Color saturation
Tint
Sharpness
To reset the Custom 1 and Custom 2/THX image presets to their factory defaults, select
Factory Default and press ENTER.
display: its serial number, the installed hardware and firmware versions and the firmware
version build date. Should you ever need to contact Vidikron Technical Support, this
information will help them answer your questions or resolve product performance issues.
Serial Number
Hardware
Firmware
Date
0
0100.0922
Feb 29 2008
Vidikron PlasmaView VHD Installation/Operation Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
inputs. This menu should be used by ISF-certified technicians only.
➤
ISF Night
To calibrate the digital (HDMI 1 and HDMI 2) inputs, use the Display
Image controls in the Service menu. For more information, refer to
Note
Display Color
Input Image
Input Color
ISF Day
You must enter a passcode to access the Calibration menu.
Note
Display Color
Input Image
Input Color
To recall the ISF Night or ISF Day settings, select “ISF Night” or “ISF Day” from the ISF Presets
menu (see above). Or, use the corresponding buttons on the remote control.
Save ISF Settings
Output Shift
ISF Night - Display Color: Use the Display Color settings to adjust the color balance at the
display device (as opposed to the VHD Controller) for analog sources (up to 1080i). These
settings are saved independently for each input.
Splash Configure
OSD Position
•
•
•
Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A
good way to do this is to use a test pattern consisting mostly of solid white areas, such as
an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue,
decrease the Gain for that color.
Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalances
in the dark areas of the image. A good way to do this is to use a test pattern consisting
mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain
traces of red, green or blue, decrease the Offset for that color.
excess ambient light washes out the image and it becomes difficult or impossible to see
details in dark areas, lower the gamma setting to compensate. This will improve contrast
while maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting. Again, good gamma
improves contrast while maintaining good details for blacks and whites.
•
Color Temp.: Select Color Temp from the Display Color menu to adjust the color
temperature. For most situations, the appropriate setting is (1). The higher setting (2)
produces a “bluer” picture; the lower one (0) a “warmer” picture with more pronounced
red and orange hues.
•
•
automatically. To enable AGC, set it to 1 (on). To disable it, set it to 0 (off).
Input Level: The Input Level control allows you to adjust parts which are extremely bright
and hard to see. (This cannot be adjusted when the input signal is digital.)
but are accessible only by entering the Calibration menu passcode. This makes it possible to
restore the picture quality settings to what they were when the display was installed, simply
by recalling the “ISF Night” preset.
44
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ISF Night - Input Color: The Input Color controls are similar to those in the Display Color
menu (see above), but adjust the color balance at the VHD Controller (as opposed to the
display device). These settings are also saved independently for each input.
•
menu (see above), but affect the Y, Pb and Pr signal components rather than the red and
blue channels.
•
Chroma Delay: use the Chroma Delay control to correct a mis-aligned image from a
Composite, S-Video or Component video source. Chroma delay in an image causes color
shifts to occur to the left of the vertical edge transitions, producing artificial shadows or a
“halo” effect. If necessary, adjust this setting to eliminate them.
•
•
Phase: Adjust the phase if the image (usually from an RGB source) shows shimmer or
“noise.” Pixel phase adjusts the phase of the pixel sampling clock relative to the incoming
signal. The effect of this control is similar to that of a tracking control on a VCR.
For best results, use a good test pattern such as a smooth gray consisting of a clear pattern
of black and white pixels, or a similar “half on, half off” graphic image. (You may notice
that you can stabilize the image at more than one point. Use either setting in this case.)
Noise Filter: To apply noise filtering to the input signal, select Noise Filter from the Input
Color menu. The Noise Filter is useful for clearing up noisy images from 480i video
sources.
Use the left- or right-arrow buttons to select the desired amount of noise reduction,
keeping in mind that higher settings (which reduce high frequencies) may also “soften”
the image.
Save ISF Settings: Whenever you make a change to the ISF settings, you should always save
it. Select Save ISF Settings from the ISF Calibration menu to do this. In the event you ever
menu, except that they change the characteristics of the output signal. These settings are
saved independently for each aspect ratio.
Splash Configure: Use the Splash Configure menu to customize the appearance of the
start-up message that appears on the vacuum fluorescent display upon power-up.
•
owner’s name, your name, the phrase “ISF Calibrated” and/or any other string, up to 20
characters in length.
Use the up or down cursor button to select a character. Use the right and left cursor
buttons to change the cursor position. Press MENU when you have finished entering text.
Then, check the “Splash Enable” box to have the PlasmaView VHD display the information
you enter here when it is turned on.
Vidikron PlasmaView VHD Installation/Operation Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Vidikron/ISF Logo Splash Screen Timers: When you turn on the PlasmaView VHD, it
projects a welcome screen with the Vidikron logo followed by one with the ISF logo.
two images appear. The range is from 2 to 60 seconds, in one-second increments.
Use the up or down cursor button to select a timer value to adjust. Use the right or left
cursor button to change the timer value. Press MENU when you have finished configuring
both timers.
OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the
size and position of the OSD controls.
be used by ISF-certified technicians only.
➤
Test Video
Input Names
You must enter a passcode to access the Service menu.
Note
Remote Control
Display Device
HD Format
the PlasmaView VHD. Four patterns are available, consisting of white/gray or colored bars.
These are useful for calibrating other theater source components (DVD player, HD tuner etc.)
that have their own picture controls.
Triggers
Miscellaneous
System Reset
Press MENU to exit test pattern mode.
Restore Saved Settings
Input Names: You can give each VHD Controller input a descriptive name. For example, you
may want to change the default input name to the type of source component connected to
it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can
be up to 12 characters long; the others can be up to eight characters long.
Input Names
Restore
Composite
Composite
S-Video 1
S-Video 2
Component SD
HD/RGB 1
HD/RGB 2
HDMI 1
S-Video 1
S-Video 2
Component SD
HD/RGB 1
HD/RGB 2
HDMI 1
To edit an input name, select Input Names from the Service menu. Press or to select an
input and press ENTER. Use the or buttons to change a character; press or to
select a character to change. When you have finished editing the input name, press MENU.
To restore the default input name, press repeatedly to highlight that input name in the
“Restore” column. Then, press ENTER.
HDMI 2
HDMI 2
To save input names so that they can be restored after a System Reset (described on
Save
The button takes you from top to bottom in the left column, then from
top to bottom in the right column. To highlight “Save,” scroll through
both columns.
Note
Remote Control: The Remote Control menu shows you the primary and secondary infrared
(IR) codes to which the VHD Controller will respond. By default, both are set to 17. You can
change these codes if either:
•
Another device in the theater (a DVD player, for example) is responding to commands
undesirable.
46
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
•
You have multiple VHD Controllers and want to control them independently, as opposed
to broadcasting commands from a single remote to all of them. In this scenario, you can
use multiple remotes programmed to use different IR codes. Or, you can use a single
remote and change the IR code as needed to address a specific device.
Use the VHD Controller front-panel keypad to change its IR code. Then,
change the code sent by the remote to match as described below.
Tip
Do not change the “Type” setting in this menu.
Note
When you change a remote code on the VHD Controller, you must re-program your remote
control to send that same code. To do this:
1. Using a straightened paper clip or similar object, press and hold the
CODE button on the remote control for approximately three
seconds, or until the LED on the remote lights solid red.
CODE
– OR –
NT
If your remote control unit does not have a CODE button, press and
hold the LIGHT button on the remote control for approximately
three seconds, or until the LED on the remote lights solid red.
2. Enter a new two-digit code between 00 and 31 inclusive. Use the
16:9 button for “9” and the 4:3 button for “0.” Include a leading
zero for single-digit codes; for example, enter 9 as “09.”
3. The LED turns off to confirm the code change. If you enter an invalid code, the LED
flashes for three or four seconds. Try again, entering a valid code.
Display Device: The options in the Display Device menu allow you to perform certain
adjustments at the plasma display.
•
following display device adjustments (these are global, independent of any input):
•
•
•
Select Left/Right or Up/Down and use the or buttons to fine-tune the displayed
image position.
Select Width or Height and use the or buttons to fine-tune the display device
aspect ratio.
PlasmaView VHD map a 1920x1080 input signal to 1080p HD panel pixels, displaying
100% of the original content. By skipping the scaling process, the PlasmaView VHD can
produce high-definition images in their original, 1:1 pixel form.
97% of the original is displayed. Use this setting to minimize or elimate image flicker.
1. Pix By Pix is available only when the input signal is 1080i or 1080p.
Note
Vidikron PlasmaView VHD Installation/Operation Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Display Device menu to perform the following display device adjustments.
•
•
•
•
•
•
•
•
•
•
•
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
AGC
Input Level
Red/Green/Blue Gain
Red/Green/Blue Offset
Gamma
The PlasmaView VHD stores any changes you make to these settings in the
Note
currently-selected ISF preset (ISF Day or ISF Night). After calibrating the
display for one ISF preset, save your settings, select the other ISF preset and
repeat the process.
HD Format: If the characteristics of the incoming signal on the HD1 or HD2 inputs are
known, select HD Format from the Service menu and set them as described below. Doing so
can reduce the time it takes the VHD Controller to switch from HD to 480i signals or vice
versa.
This is generally not necessary unless the VHD Controller – for whatever reason – has
difficulty determining the color space (RGB or YUV), bandwidth or resolution of the incoming
HD signal. In most situations, the Auto settings work well.
•
•
•
HD/RGB 1 and HD/RGB 2 (Color Space): Select Auto, RGB or YUV.
ADC Bandwidth: Select Auto, 75 MHz, 150 MHz or 300 MHz.
YPbPr Input Resolution: Select Auto or specify the input resolution, if known: 480i, 480p,
576i, 576p, 720p or 1080i.
Triggers: Select Triggers from the Service menu to configure the 12-volt trigger outputs. You
can assign one or more trigger outputs to each aspect ratio. Those triggers are then activated
by selecting that aspect ratio.
To save the trigger settings so that they can be restored after a System Reset (described
below), press repeatedly to highlight “Save.” Then, press ENTER.
48
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous: Select Miscellaneous from the Service menu to set the following options:
•
Language: Select Language from the Miscellaneous menu and press the up- or
down-arrows to select the OSD language. (Currently, only English is supported.)
•
Menu Mode: This is the manner in which the OSD menus appear and disappear when you
press MENU. Choose one of the following:
0 = No transition; menus abruptly appear and disappear.
1 = Menus fade in and out.
2 = “Checkerboard” dissolve; menus appear and disappear in sections.
3 = “Window shade” effect; menus are drawn on a diagonal from top left to bottom right,
and retract in the opposite direction.
•
•
Timeout - Short/Long: These settings control how long the OSD menus stay on screen.
Select a time-out period of from 2 to 60 seconds.
Side Bar Color: This controls the color of the inactive image area. The range is from -100
(black) to 100 (white).
The inactive image area is on either side of the active image area when using the Standard
4:3 aspect ratio (or the entire screen when no incoming video signal is present).
•
Film Mode: Enable Film Mode to smooth out moving images from interlaced,
standard-definition (SD) sources. In most cases, the PlasmaView VHD detects the proper
“pull-down” rate and vertical frequency. However, if your source is jittery and/or tearing
you may wish to enable Film Mode to ensure stable processing for that source.
System Reset: To reset ALL VHD Controller settings (including image settings) back to their
factory defaults, choose System Reset from the Service menu.
A confirmation message appears, reminding you to save your settings before you perform
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.
This action is not undoable. Proceed with caution! Before you perform a
Caution
Restore Saved Settings: Following a System Reset, select Restore Saved Settings to apply all
previously-saved settings to the PlasmaView VHD and VHD Controller.
Vidikron PlasmaView VHD Installation/Operation Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
50
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5Maintenance and Troubleshooting
Regular cleaning will extend the life and performance of the PlasmaView VHD. Before
cleaning, be sure to unplug the power cord from the power outlet.
5.1
Cleaning
Do not under any circumstances use solvents such as benzene or thinner to clean the
PlasmaView VHD. Doing so may cause deterioration or peeling of paint from the display or
remote control unit.
Cleaning the Display Panel
Body and Remote Control
Cleaning the Screen
Cleaning the Vents
Wipe the display and remote control gently with a soft cloth. In the case of excessive dirt
buildup, dampen a soft cloth with a diluted neutral cleaning detergent and after wringing
the cloth thoroughly, wipe the component and then dry it with a dry soft cloth.
After dusting, wipe the screen gently using the supplied cleaning cloth or another soft cloth
(cotton, flannel etc.). Do not use tissue or a rough cloth. The screen surface is easily scratched;
do not rub it or hit it with a hard object.
If you clean the surface of the screen with a wet cloth, water droplets on the surface may
enter into the product and cause a malfunction.
As a general rule, use a vacuum cleaner about once a month to clean the vents on the rear
panel of the display of dust buildup (set the vacuum cleaner to its weakest setting when
doing this). If not removed, accumulated dust can cause the internal temperature to increase,
resulting in possible breakdown or fire.
Vidikron PlasmaView VHD Installation/Operation Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5-1 provides some general guidelines for troubleshooting problems you may
encounter with the PlasmaView VHD. If the suggested solutions fail to resolve the problem or
if you encounter an issue not described here, please contact your Vidikron dealer or Vidikron
Technical Support.
5.2
Troubleshooting Tips
Table 5-1. Troubleshooting Chart
Symptom
Possible Cause(s)
Solution
The display does not turn on
after initial installation.
•
•
The PlasmaView VHD is not
plugged in or the AC outlet
is not active.
The VHD Controller is not
plugged in or the AC outlet
is not active.
•
•
Ensure that the PlasmaView
VHD is plugged in and that
the AC outlet is active.
Ensure that the VHD
Controller is plugged in and
that the AC outlet is active.
Replace the batteries.
•
•
The remote control
•
•
batteries have run out.
The serial connection from
the VHD Controller to the
PlasmaView VHD is
Ensure that the RS-232
output from the VHD
Controller is properly
connected to the RS-232C
input on the PlasmaView
incorrect.
The PlasmaView VHD and VHD
Controller are both on, but
there is no picture and
on-screen menus do not
appear.
•
Faulty or incorrect video
connection between the
VHD Controller and the
PlasmaView VHD.
•
Ensure that the HDMI
output from the VHD
Controller is properly
connected to the SLOT 2
input on the PlasmaView
The display is on and menus
appear, but there is no picture.
•
•
Incorrect source selection.
Source component is not
turned on.
•
•
Select the correct source.
Turn on the source
component.
•
•
•
•
Source component is
connected incorrectly or
not at all.
•
•
•
•
Check connections from
source component to VHD
Controller.
Image is too bright and/or
lacks definition in the bright
areas of the image.
Contrast is set too high.
Lower the contrast setting.
Image appears “washed out”
and/or dark areas appear too
bright.
Brightness is set too high.
Lower the brightness
setting.
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to the
wrong inputs on the VHD
Controller.
Ensure that the source
outputs are connected to
the correct VHD Controller
input.
•
The Red, Green or Blue
(analog) outputs from the
VHD Controller are
connected to the wrong
inputs on the PlasmaView
VHD.
•
Ensure that the VHD
Controller outputs are
connected to the correct
inputs on the PlasmaView
VHD.
52
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5-1. Troubleshooting Chart (continued)
Symptom
Possible Cause(s)
Solution
RGB-HD images appear
“noisy.”
•
•
Clock and Phase settings
need adjustment.
•
•
Adjust Clock and Phase
settings (refer to ISF Night -
Computer images do not
display correctly.
The resolution and
Select a compatible
resolution and vertical
frequency (refer to
page 66).
frequency of the video card
in the computer are not
compatible with the
PlasmaView VHD.
The image is too large or too
small.
•
Image size needs adjusting.
•
Adjust the image size (refer
Vidikron PlasmaView VHD Installation/Operation Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
54
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6Serial Communications
To interface the PlasmaView VHD with a home theater automation/control system or a PC
6.1
running terminal emulation software, connect it to the RS-232 output of the VHD Controller
RS-232 Connection and
Port Configuration
Configure the RS-232 controller or PC serial port as follows: no parity, eight (8) data bits, one
(1) stop bit and no flow control. Set the baud rate to 19200, to match that of the VHD
Controller RS-232 port.
Serial commands to the VHD Controller take the following form:
6.2
Serial Command Syntax
•
•
Commands are not case-sensitive.
For a single command that takes no parameters, type the command followed by a
carriage return; for example, to set the aspect ratio to Letterbox, type
LETTERBOX <Enter>.
•
•
For a single command that takes a parameter, type the command, a space or a comma
and the desired value followed by a carriage return; for example, to set the brightness to
-10, type BRIGHTNESS -10 <Enter>or BRIGHTNESS,-10 <Enter>.
You can also send a string of multiple commands on a single line, separated by commas.
For example, COMPOSITE,BRIGHTNESS 100,16:9 <Enter>switches to the
Composite video input, sets the brightness to 100 and sets the aspect ratio to 16:9.
Command strings can be up to 255 characters long.
Avoid combining the ONor POWER 1commands with other commands on a
Note
single line. After sending ONor POWER 1, allow at least five (5) seconds for
the VHD Controller to power up. If you have enabled the ISF splash screen
Controller to power up.
Once it does, it will accept and properly execute multiple serial commands.
Vidikron PlasmaView VHD Installation/Operation Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1 lists the RS-232 command set. The “Parameter (min/max)” column shows the valid
parameter ranges, or “NA” for commands that take no parameters.
When you enter a valid command, the VHD Controller executes it and acknowledges it with a
plus sign on the command line (+ >). When you enter an invalid command – one that is
misspelled or followed by values outside the valid range for that command – the VHD
Controller ignores it and returns a minus sign (- >).
Table 6-1. Serial Commands
Parameter
(min/max)
Value
Stored?
Command
Description
Power On/Off Commands
OFF
ON
NA
NA
NA
NA
NA
Turns system off
Turns system on
NA
0/1
NA
POWER
Turns system on or off (toggles on/off state)
Returns power status
POWER?
Input Selection Commands
COMPONENT
COMPOSITE
HDMI1
NA
NA
NA
NA
NA
NA
NA
NA
NA
YES
YES
YES
YES
YES
YES
NA
Selects the Component input
Selects the Composite video input
Selects the HDMI 1 input
Selects the HDMI 2 input
Selects the RGB/HD 1 input
Selects the RGB/HD 2 input
Returns active input
HDMI2
HD1
HD2
INPUT?
SVIDEO1
SVIDEO2
YES
YES
Selects the S-Video 1 input
Selects the S-Video 2 input
Aspect Ratio Commands (not available on HDMI 1 or HDMI 2 inputs)
16:9
NA
NA
NA
NA
NA
NA
YES
NA
Selects the 16:9 aspect ratio
Returns current aspect ratio
Selects the Cinema aspect ratio
Selects the Letterbox aspect ratio
Selects the 4:3 aspect ratio
ASPECT?
CINEMA
LETTERBOX
4:3
YES
YES
YES
YES
INTELLIWIDE
Selects the IntelliWide aspect ratio
56
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1. Serial Commands (continued)
Parameter
(min/max)
Value
Stored?
Command
Description
Picture Adjust Commands (not available on HDMI 1 or HDMI 2 inputs)
BRIGHTNESS
BRIGHTNESS?
CHROMADELAY
CHROMADELAY?
COLOR
-100/100
NA
YES
NA
Sets a value for brightness
Returns brightness setting value
Sets a value for input color chroma delay
Returns input color chroma delay setting
Sets a value for color
-12/12
NA
YES
NA
-100/100
NA
YES
NA
COLOR?
Returns color setting value
CONTRAST
CONTRAST?
FILMMODE
FILMMODE?
FILTER
-100/100
NA
YES
NA
Sets a value for contrast
Returns contrast setting value
Sets Film Mode off (0) or on (1)
Returns Film Mode setting (0 = off; 1 = on)
Sets a value for input color noise filter
Returns input color noise filter setting
Adjusts phase
0/1
YES
NA
NA
0/15
NA
YES
NA
FILTER?
PHASE
0/3
YES
NA
PHASE?
NA
Returns phase setting value
Sets a value for sharpness
SHARPNESS
SHARPNESS?
TINT
-6/6
YES
NA
NA
Returns sharpness setting value
Sets a value for tint
-100/100
NA
YES
NA
TINT?
Returns tint setting value
Memory Preset Commands
CUSTOM1
CUSTOM2
PRESET?
NA
NA
NA
YES
YES
NA
Loads “Custom 1” image preset
Loads “THX” (“Custom 2”) image preset
Returns currently-selected preset
(ISF Day, ISF Night, Custom 1 or
THX/Custom 2)
DAY
NA
NA
YES
YES
Loads “ISF Day” image preset
Loads “ISF Night” image preset
NIGHT
Vidikron PlasmaView VHD Installation/Operation Manual
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1. Serial Commands (continued)
Parameter
(min/max)
Value
Stored?
Command
Description
Input Position Commands (not available on HDMI 1 or HDMI 2 inputs)
IHEIGHT
IHEIGHT?
IHPOS
-100/100
NA
YES
NA
Sets the value for input height
Returns input height value
-100/100
NA
YES
NA
Sets a value for horizontal input position
Returns input horizontal position value
Sets a value for vertical input position
Returns input vertical position value
Sets the value for input width
IHPOS?
IVPOS
-100/100
NA
YES
NA
IVPOS?
IWIDTH
-100/100
NA
YES
NA
IWIDTH?
OVERSCAN
OVERSCAN?
Returns input horizontal width value
Sets the overscan percentage
0/10
YES
NA
NA
Returns overscan percentage
Output Shift Commands (not available on HDMI 1 or HDMI 2 inputs)
OHEIGHT
OHEIGHT?
OHPOS
-100/100
NA
YES
NA
Sets the value for output height
Returns output height value
-100/100
NA
YES
NA
Sets the value for output horizontal position
Returns output horizontal position value
Sets the value for output vertical position
Returns output vertical position value
Sets the value for output width
OHPOS?
OVPOS
-100/100
NA
YES
NA
OVPOS?
OWIDTH
OWIDTH?
-100/100
NA
YES
NA
Returns output horizontal width value
58
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1. Serial Commands (continued)
Parameter
(min/max)
Value
Stored?
Command
Description
Miscellaneous Commands (not available on HDMI 1 or HDMI 2 inputs)
BKGND
-100/100
YES
Sets the background color for 4:3 aspect ratio
(-100 = black; 100 = white)
BKGND?
NA
NA
NA
NA
NA
YES
Returns background setting value
Returns product manufacture date
DATE?
HDINPUTRES
Sets YPbPr input resolution and refresh rate
for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i / 60 Hz
6 = 720p / 50 Hz
7 = 1080i / 25 Hz
Any other value = Auto
HWVER?
INRES?
NA
NA
NA
NA
Returns hardware version number
Returns input resolution
Miscellaneous Commands (available on all inputs)
SWVER?
TRIGGER
NA
1/3
NA
Returns software version number
YES
Assigns trigger to currently-selected aspect
ratio
Vidikron PlasmaView VHD Installation/Operation Manual
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1. Serial Commands (continued)
Parameter
(min/max)
Value
Stored?
Command
Description
The following serial commands are meant to emulate buttons on the remote control or VHD
Controller front panel. Each button has its own serial command, so effectively it is as if you were
using the IR remote only you’ll be doing so via serial commands. These commands provide active
OSD responses just like the IR remote.
DOWN
ENTER
LEFT
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Down-Arrow ( ) key
ENTER key
Left-Arrow ( ) key
MENU
MENU
RIGHT
UP
Right-Arrow ( ) key
Up-Arrow ( ) key
60
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7Specifications
Table 7-1 lists the PlasmaView VHD specifications.
7.1
PlasmaView VHD
Specifications
Table 7-1. PlasmaView VHD Specifications
Native Resolution:
Screen Size:
1920 x 1080
VP-5000VHD / VP-5000VHDa:
43.50 in. W x 24.50 in. H (1104.9 x 622.3 mm)
50 in. (1270.0 mm) diagonal
VP-6500VHD / VP-6500VHDa:
56.50 in. W x 31.80 in. H (1434.0 x 807.0 mm)
65 in. (1646.0 mm) diagonal
VP-103VHD:
89.30 in. W x 50.30 in. H (2268.2 x 1277.6 mm)
103 in. (2616.2 mm) diagonal
Screen Aspect Ratio:
Available Aspect Ratios:
DTV Compatibility:
16:9
Refer to Table 7-2
480p, 720p, 1080i, 1080p
Contrast Ratio:
400:1 (measured at 100 lux); 5,000:1 maximum
Data/Graphics Compatibility:
VGA, SVGA, XGA, SXGA, UXGA (compressed)
Horiz. scan frequency = 15 to 110 kHz
Vert. scan frequency = 48 to 120 Hz
Inputs (from VHD Controller):
Power Requirements:
(1) Digital Video (HDMI 1.2A with HDCP)
(1) RS-232 (9-pin, D-sub male)
VP-5000VHD / VP-5000VHDa / VP-6500VHD /
VP-6500VHDa: 100 to 240 VAC, 50/60Hz
VP-103VHD: 200 to 240 VAC, 50/60Hz
Power Consumption:
Operating Environment:
Dimensions:
VP-5000VHD / VP-5000VHDa: 650 W/2218.4 BTUs/hour
(1.0 W in standby), maximum
VP-6500VHD / VP-6500VHDa: 790 W/2696.3 BTUs/hour
(1.0 W in standby), maximum
VP-103VHD: 1500 W/5119.5 BTUs/hour (1.5 W in standby),
maximum
40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing)
Altitude – Model VP-5000VHDa / VP-6500VHDa = up to 9,100
feet (2,774m)
Altitude – Model VP-5000VHD / VP-6500VHD / VP-103VHD =
up to 7,800 feet (2,377m)
VP-5000VHD / VP-5000VHDa: See Figure 7-1
VP-6500VHD / VP-6500VHDa: See Figure 7-2
VP-103VHD: See Figure 7-3
Weight
(panel only, without stand):
VP-5000VHD / VP-5000VHDa: 93.0 lbs. (42.18 kg)
VP-6500VHD / VP-6500VHDa: 163.1 lbs. (73.98 kg)
VP-103VHD: 485.0 lbs. (220.0 kg)
Vidikron PlasmaView VHD Installation/Operation Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-1. PlasmaView VHD Specifications (continued)
Limited Warranty:
Three (3) years parts and labor from the date of delivery to
the end user (except for plasma glass panel).
Plasma Glass Panel: One (1) year parts and labor from the
date of delivery to the end user.
Regulatory Approvals:
Complies with FCC Part 15 Class B, ICES-003, UL6500 Ver.2
Specifications are subject to change without notice.
Table 7-2 lists the VHD Controller specifications.
7.2
VHD Controller
Specifications
Table 7-2. VHD Controller Specifications
Aspect Ratios:
Video Standards:
Inputs:
4:3, Letterbox, 16:9, IntelliWide, Cinema
NTSC, PAL
(1) Composite
(2) S-Video
(1) Component
(2) HD-R (Pr), G (Y), B (Pb), H, V
(2) HDMI with HDCP
Outputs:
HDMI with HDCP
Control Options:
-
-
-
Discrete infrared remote
Serial commands via RS-232
Front-panel controls
RS-232 Communication
Parameters:
19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs:
(3) +12 VDC, each rated at 750 mA and thermal
fuse-protected
Bandwidth:
150 Mega Samples per Second (MSPS)
Power Requirements:
Operating Environment:
100 to 240 VAC (auto-sensing), 50/60 Hz, 160 Watts
41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions:
Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight:
13.0 lbs. (5.90 kg)
Regulatory Approvals:
Limited Warranty:
Complies with FCC, CE C-Tick
Two (2) years parts and labor from the date of delivery to the
end user.
Specifications are subject to change without notice.
62
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-3 lists the signal types supported by each input on the VHD Controller.
7.4
Supported Timings
Table 7-3. Supported Signal Timings by Input
Supported? (√ = Yes, – = No)
Refresh
Rate (Hz) Frequency (kHz)
Horizontal
Pixel Frequency
(MHz)
Format
Resolution
HD/RGB 1 HDMI 1
HD/RGB 2 HDMI 2
S-Video 1
S-Video 2
Component
Video
60.00
72.00
75.00
85.00
56.00
60.00
72.00
75.00
85.00
60.00
70.00
75.00
60.00
60.00
59.94
59.94
50.00
50.00
50.00
60.00
50.00
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
63.981
74.038
15.734
31.469
15.625
31.250
37.500
45.000
28.125/31.250
25.175
31.500
√
√
√
√
√
√
√
–
√
√
√
√
√
–
√
√
√
√
√
√
√
√
–
–
–
√
√
√
√
–
–
–
–
–
√
√
√
√
√
√
–
–
√
–
√
–
√
√
√
√
√
√
√
√
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
√
–
√
–
–
–
–
–
–
–
–
√
√
√
√
–
–
–
–
–
–
–
–
–
–
–
–
–
–
√
–
√
–
–
–
–
–
–
–
–
√
√
√
√
–
–
–
–
–
–
–
–
–
–
–
–
–
–
√
–
√
–
–
–
–
–
–
–
–
√
√
√
√
640x480
640x480
31.500
36.000
36.000
40.000
800x600
800x600
50.000
49.500
56.250
65.000
1024x768
1024x768
75.000
78.750
1280x1024 1280x1024
1920x1080 1920x1080
108.000
154.000
13.500
480/60i
480/60p
576/50i
720x487
720x483
27.000
720x576
14.750
576/50p
720/50p
720/60p
1080/50i
1080/60i
1080/24p
1080/50p
1080/60p
NTSC 3.58
NTSC 4.43
PAL-B/G
PAL-M
720x576
29.000
1280x720
1280x720
1920x1080
75.250
74.250
74.250/72.000
74.175/74.250
74.175/74.250
148.500
1920x1080 59.94/60.00 33.716/33.750
1920x1080 23.98/24.00 26.978/27.000
1920x1080
50.00
56.250
1920x1080 59.94/60.00 67.433/67.500 148.350/148.500
–
–
–
–
59.94/60.00 15.734/15.750
59.94/60.00 15.734/15.750
3.580
4.430
4.430
3.580
50.00
15.625
59.94/60.00 15.734/15.750
66
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-3. Supported Signal Timings by Input (continued)
Supported? (√ = Yes, – = No)
Refresh
Rate (Hz) Frequency (kHz)
Horizontal
Pixel Frequency
(MHz)
Format
Resolution
HD/RGB 1 HDMI 1
HD/RGB 2 HDMI 2
S-Video 1
S-Video 2
Component
Video
PAL-N
–
–
50.00
15.625
3.580
4.430
√
√
–
–
√
√
√
√
√
√
PAL-60
59.94/60.00 15.734/15.750
Vidikron PlasmaView VHD Installation/Operation Manual
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
68
Vidikron PlasmaView VHD Installation/Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
020-0781-01 Rev. A
March 2008
1-888-4-VIDIKRON
Fax 503-748-8161
SERIAL NUMBER
Download from Www.Somanuals.com. All Manuals Search And Download.
|