O W N E R ’ S
O P E R A T I N G
M A N U A L
50
DLP™ PROJECTOR
VERSION 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Front / Top View....................................................................................................................................... 10
Control Panel............................................................................................................................................ 13
Control Panel / Remote Control Functions Compared ................................................................ 17
Vidikron Vision Model 50 Owner’s Operating Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents (continued)
Vidikron Vision Model 50 Owner’s Operating Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
TWO YEAR LIMITED WARRANTY
For Projectors, Video Processors and Controllers
Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation,
setup and care, you should enjoy many years of unparalleled video performance.
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your
other important documents.
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
SERVICE LABOR: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of
manufacturing defect for a period of two (2) years from the effective date of delivery to the end user (excluding the lamp).
PARTS: (Not including the lamp) Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in
materials or workmanship for a period of two (2) years from the effective date of delivery to the end user. Such replacement
parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.
PROJECTOR LAMP: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a
manufacturing defect for a period of six (6) months or 1000 hours, which ever comes first, from the effective date of delivery
to the end user. In addition, Vidikron will provide a new or rebuilt replacement lamp for the lamp that fails due to defects
in materials or workmanship for a period of six (6) months or 1000 hours, which ever comes first, from the effective date of
delivery to the end user. Such replacement lamps are then subsequently warranted for the remaining portion (if any) of the
original warranty period.
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and
does not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting
from accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments;
improper maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and
brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote
control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this
Limited Warranty.
CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS.
ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. MOREOVER, DAMAGE
RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE
UNDER THIS LIMITED WARRANTY.
Vidikron Vision Model 50 Owner’s Operating Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RIGHTS, LIMITS AND EXCLUSIONS:
Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There
are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to
the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts,
and some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
EFFECTIVE WARRANTY DATE:
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as
evidence of the purchase date.
IMPORTANT: WARRANTY REGISTRATION:
Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we
should discover a safety problem or product update for which you must be notified.
CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:
Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location
of the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron
Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs.
If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron
Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility
to arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If
this is not possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return
product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs
will be the responsibility of the owner.
COPYRIGHT AND TRADEMARKS
© Copyright 2005 Vidikron. This document contains proprietary information protected by copyright. All rights are reserved.
No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written
permission of the manufacturer.
All trademarks and registered trademarks are the property of their respective owners.
Vidikron Vision Model 50 Owner’s Operating Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION:
To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this
Limited Warranty, please call or write:
VIDIKRON
Attn: Customer Service Department
2900 Faber Street
Union City, CA 94587
Ph: (510) 324-5900
Fax: (510) 324-5905
Toll Free: (888) 4VIDIKRON
VIDIKRON PRODUCT INFORMATION
RETAIN THIS INFORMATION FOR YOUR RECORDS
Model Purchased
Date
Serial Number
Vidikron Authorized Dealer Name
Address
City
State/Province
Fax
Postal Code
Phone
Vidikron Vision Model 50 Owner’s Operating Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Thank you for your purchase of this quality Vidikron video projector! It has been designed
to provide you with the quality of video that is expected in a home theater. For the best
performance, please read this manual carefully as it is your guide through the menus and
operation.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock.
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Do not use this projector near water, outdoors or otherwise exposed to the
elements.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized
type plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
the replacement of the obsolete outlet.
9. Do not connect the RJ-11 RS-232 jack to a telephone line connection.
10. The 12V trigger only outputs DC 12V signal for triggering. Do not connect to any
other power input or output. This could cause damage to this unit.
11. Only use accessories specified by Vidikron.
12. Keep the packing material in case the projector should ever need to be shipped.
13. Unplug this projector during lightning storms or when it will not be used for an
extended period of time.
14. The lamp becomes extremely hot during operation. Allow the projector to cool down
for approximately 45 minutes prior to removing the lamp assembly for replacement.
Do not operate lamps beyond the rated lamp life. Excessive operation of lamps
beyond rated life could cause them to explode in rare occasions.
15. Refer all servicing to qualified service personnel. Servicing is required when the
projector has been damaged in any way, objects have fallen or spilled into the
projector, the projector has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Vidikron Vision Model 50 Owner’s Operating Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
•
•
Native 16:9 Aspect Ratio DMD 1280 x 720p
Features
High Contrast and Picture Quality
12-degree mirrors with dark metal process.
•
•
•
High Dynamic Range and Rich Gray-scale
8-segment, 5x color wheel with wide color space.
TIR (Total Internal Reflection) Prism
High-performance light engine with Cat’s Eye optics.
Wide Variety of Inputs
Support for various video formats, including Composite, S-Video, Component, DTV
Y/PB/PR, DTV RGB HD and Computer signals. The HDTV input (DTV Y/PB/PR and DTV
RGB) is via RGB BNC connectors, providing the least amount of signal degradation
caused by longer cable runs.
•
•
HDTV Ready
480p, 1080i and 720p (576p PAL Version) formats are all compatible with this unit
(via an external DTV decoder, not provided).
De-interlacing with 3:2 Pull-down
Using Vidikron’s proprietary De-interlacing technology, this projector provides
exceptional scaling and film-to-video (3:2 pulldown) conversion for the most artifact-
free images possible.
•
•
PIP/ PBP function
Picture in Picture/Picture by Picture functions allow you to display two inputs
on the screen at the same time.
ISF Calibration
This product includes ISF day and night mode settings as established by the
Imaging Science Foundation. These standards provide for superior image quality
and assure the user that restoration to preset values for both day and night viewing
is accomplished by just the press of a button, should the projector’s settings or
calibrations be inadvertently disturbed.
Vidikron Vision Model 50 Owner’s Operating Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Front / Top View
1. Vidikron Logo
4. Intake Vent
Can be rotated to match floor or
ceiling installation. See “Vidikron
Logo” on page 15.
5. Exhaust Vent
6. Front IR Sensor
7. Projection Lens
2. Top IR Sensor
3. Status LEDs
See “Control Panel” on page 13.
Vidikron Vision Model 50 Owner’s Operating Manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Rear / Bottom View
1
2
3
4
SOURCE
/ENTER
MENU
/EXIT
ZOOM+
M O O
POWER
+
Z
/ E N T O P
S O U R C E
R
E
E
R W
T
/ E X I
M E N
U
LENS
MEMORY
Y R M E M O
SHIFT
ZOOM-
M O O
T F I H S
L E N S
-
Z
5
6
7
8
9
10
9
1. Connector Panel
7. Cable Opening
See “Connector Panel” on page 14.
Pass cables through this opening.
2. AC Power IN Socket
8. Lamp Module Cover
Remove this cover when replacing
the lamp. See “Lamp Replacement”
on page 47.
3. AC Power Switch
4. Built-in Control Panel
See “Built-in Control Panel” on
page 14.
9. Front / Rear Adjusters
Adjusts the height or projection
angle.
5. Cable Access Door
Open to access connectors.
See “Connector Panel” on page 14.
10. Ceiling Mount Holes
The connecting holes for the ceiling
mount bracket.
6. Door Release Button
Vidikron Vision Model 50 Owner’s Operating Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
This page is intentionally left blank.
Vidikron Vision Model 50 Owner’s Operating Manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
Control Panel
1. LAMP LED
Indicates the status of the lamp
3. TEMP LED
Indicates the status of the fans and
- Red when the lamp has exceeded
its usage life or developed a problem.
Please contact your Vidikron Dealer
for assistance.
- Flashing Red when the fans are
not working or the lamp cover is
open. Please contact your Vidikron
Dealer for assistance.
internal temperature
- Red when the internal temperature
is too high. Please contact your
Vidikron Dealer for assistance.
- Flashing Red when the fans are
not working or the lamp cover is
open. Please contact your Vidikron
Dealer for assistance.
2. POWER LED
4. TOP IR SENSOR
Indicates the status of the power
- Orange when the AC power cord
is plugged into a wall outlet (standby
mode). Once in standby mode, you
can turn on the projector by
pressing the ON button on the
remote control.
- Green when the power is turned
on (operational mode).
- Flashing Orange for the first 45
seconds after power-up indicating
that the lamp is warming up.
- Flashing Green for 110 seconds
after the projector was powered off
indicating that the lamp is cooling
down.
Vidikron Vision Model 50 Owner’s Operating Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
To access the connector panel, press the
door release button so it pops out. Turn
the knob clockwise or counter-clockwise
and pull firmly on it to open the door.
Connector Panel
(G) Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
V
( G )
B
B
R
R
R( R ) P
H
T
V
O U
1 2
12V
OUT
1. HDMI (High-Definition Multimedia Interface) Input
Digital video signal input
2. Component (RCA Jacks)
480i Component (Y/CB/CR) video signal input
3. Video (RCA Jack)
Composite video signal input
4. S-Video (mini DIN 4-pin) Y/C (S-video) signal input
5. RS-232C (RJ-11 Jack)
RS-232C control signal input (refer to page 51 for details)
6. 12v Trigger (mini jack, diameter 5.5 mm outside, 2.5 mm inside)
+12V output, active when the projector is turned on
7. RGB/ HDTV (BNC) or Progressive Scan DVD players
DTV Y/PB/PR or DTV RGB video signal input
SOURCE
/ENTER
MENU
To control the projector when signals
from a remote control cannot reach
it, use the built-in keypad next to
the connector panel.
ZOOM+
POWER
Built-In Control Panel
/EXIT
Z O O M +
Z O O M -
/ E N T E R
S O U R C E
P
/ E X I T
M E N U
Because the built-in keypad has
fewer keys than the remote keypad,
certain projector functions are
accessible only through the menu
system rather than via a direct key.
LENS
SHIFT
MEMORY
Y
ZOOM-
S H I F T
L E N S
M E M O R
Vidikron Vision Model 50 Owner’s Operating Manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
The Vidikron logo on the front of the projector can
be rotated to match a floor or ceiling installation. To
rotate the logo, grip it at the sides, pull it away from
the projector and rotate it 180 degrees.
Vidikron Logo
Remote Control
OFF
Press to turn off the
projector.
ON
Press to turn on the
projector.
COMP1 (Component 1)
Component Y/CB/CR input.
S-VID (S-Video)
S-Video signal input.
VIDEO
Composite video signal
input.
Arrow (▲,◄,▼,►)
Use to select the menu or to
make various adjustments.
COMP2 (Component 2)
DTV Y/PB/PR signal input.
ENTER
Enter the setting of items in
the menu.
RGB HD
DTV RGBHV signal input.
EXIT
HDMI
Exit and save the setting(s) of
items in the menu.
High-Definition Multimedia
Input.
MENU
Turns the on-screen display
menu on or off.
VAC
Adjusts the motorized
aperture lens iris.
(See “Aperture Control” on
page 43.)
LIGHT
Press to turn on the remote
control back light.
Vidikron Vision Model 50 Owner’s Operating Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
Remote Control
(continued)
MEM1, ISF NT (Night),
ISF DAY, DEF
Recall video memory
sequentially. See
ANA (Anamorphic)
For 16:9 DVDs.
“Selecting Video
Memory” on page 30.
4X3 (Standard 4:3)
The input signal will be scaled
to fit 4:3 display mode in the
center of the screen.
L-BOX (Letterbox)
Image in letterbox format is
enlarged to fit 16:9 full screen
display and the upper/ lower
portions are “blanked off.”
I-WIDE (IntelliWide)
4:3 image is enlarged NON-
linearly in horizontal direction
to fit 16:9 full screen display.
0 - 9
Press to type in menu
passcodes.
CINEMA
Image in Letterbox mode is
enlarged to a 16x9 image and
the upper and lower portions
are compressed.
C-FILL (Cinema Fill)
A 2.35 image is stretched
vertically in both directions to
fill a 16:9 image.
PIP (Picture in Picture) Enable
the PIP function. Use the arrow
buttons to adjust the position
of the PIP window. See “PIP /
PBP Function” on page 31.
LENS SHIFT
Shift the lens vertically.
PIP+
Enlarge the size of PIP window.
FOCUS
ACTIVE
Adjust the focus of the image.
Switch to the active window in
PIP display mode.
ZOOM
Adjust the size of the image.
PBP (Picture by Picture)
Enable the PBP function.
PIP-
Shrink the size of the PIP
window.
Vidikron Vision Model 50 Owner’s Operating Manual
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
The following illustration shows remote control buttons that are duplicated on the control
panel. Some of the functions such as power ON/OFF are combined in one button on the
control panel, however, the function is the same. This user manual describes the functions
based on the remote control.
Control Panel /
Remote Control
Functions Compared
1
SOURCE
/ENTER
MENU
/EXIT
ZOOM+
Z O O M +
FOCUS+
POWER
9
8
1
/ E N T E R P O W E R
S O U R C E
/ E X I T
M E N U
2
FOCUS-
2
3
F O C U S -
ZOOM-
F O C U S +
MEMORY
LENS
SHIFT
7
6
Z O O M -
4
5
S H I F T
L E N S
Y
M E M O R
8
9
2
6
7
3
7/9
6/8
4
Vidikron Vision Model 50 Owner’s Operating Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
This page is intentionally left blank.
Vidikron Vision Model 50 Owner’s Operating Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To remove the battery cover, press in then pull up the small plastic clip holding the cover in
place. Install the two AAA batteries with the correct polarity and then replace the cover.
Remote Control
About the Batteries
•
•
•
Make sure that the battery polarities are correct when installing the batteries.
Do not mix an old battery with a new one or different types of batteries.
If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
About the Remote Control
•
•
•
•
•
•
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the projector.
The usable range is up to 8 meters (26.25 feet) within a 45-degree horizontal angle
and a 15-degree vertical angle.
If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
The remote control may fail to operate if the infrared remote sensor is exposed to
bright sunlight or fluorescent lighting.
Ambient conditions may impede the operation of the remote control. If this happens,
point the remote control at the projector, and repeat the operation.
The Ø icon appears on the screen when a button for an unavailable function is
pressed.
Vidikron Vision Model 50 Owner’s Operating Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Proper installation of your projector will ensure the quality of your display. Whether you
are installing a projector temporarily or permanently, you should take the following into
account to ensure your projector performs optimally.
Installation
Considerations
Installation Type
Choose the installation type that best suits your needs: front or rear screen, floor mount
or inverted mount.
Front Screen, Floor Mount Installation
Advantages
Considerations
• Easy to set up
• Shares floor space with audience
• Can be moved or changed quickly
• Easy to access
Front Screen, Inverted Mount (ceiling) Installation
Advantages
Considerations
• Does not take up audience space
• Projector is unobtrusive
• Installation is more permanent
• It is more difficult to access the projector
• Projector cannot be accidentally moved
Rear Screen, Floor Mount Installation
Advantages
Considerations
• Projector is completely hidden
• Projector is easily accessed
• Requires separate room
• Installation cost is usually higher
• Usually good ambient light rejection
Rear Screen, Inverted Mount (ceiling) Installation
Advantages
Considerations
• Projector is completely hidden
• Requires separate room
• Usually good ambient light rejection
• Installation cost is usually higher
Rear Screen, Floor Mount with Mirror
Advantages
Considerations
• Projector is completely hidden
• Requires separate room
• Usually good ambient light rejection
• Installation cost is usually higher
• Requires less space behind screen than other
rear screen installations
Screen Type and Size
Front Screen Installations
In front screen installations the projector and audience are positioned in front of the
screen, which can be flat or curved.
Flat screens are recommended with this projector. They offer a gain of about 1 with a
viewing angle just less than 180°. This type of screen reflects incident light equally in all
directions so the audience can see the display from various angles.
Curved screens have a gain greater than 1 with a viewing angle much less than 180°.
This type of screen does not reflect incident light equally in all directions; instead, it
is concentrated in a viewing cone. The audience sitting within the viewing cone area
sees a brighter image than those sitting just outside this area. Vidikron generally does
not recommend use of curved screens due to excessive brightness and uncorrectable
geometrical distortion.
Vidikron Vision Model 50 Owner’s Operating Manual
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Rear screen installations
There are two basic types of rear screens: diffused and optical.
A diffusion screen has a surface that spreads the light striking it. Purely diffused screens
have a gain of less than 1. The main advantage of the diffused screen is its wide viewing
angle, similar to that of a flat screen for front screen projection. This type of screen is suitable
when a wide viewing angle is required but there is low ambient room lighting.
Optical screens take light from the projector and redirect it to increase the light intensity
at the front of the screen. This reduces it in other areas. A viewing cone similar to that of a
curved, front-screen installation is created. This type of screen is better suited for brightly
lit rooms where the audience is situated within the viewing cone.
Screen size
Choose a screen size that is appropriate for your lens and application. The size of the room
and viewing distance are the defining factors; a rule of thumb is that the primary viewing
distance be 1.5 times the screen width.
To fill a screen with an image, the aspect ratio of the screen should be equal to the aspect
ratio of the image (expressed as the ratio of its width to its height). Standard video from a
VCR has a 4:3 or 1.33:1 aspect ratio. For example, to display a VCR output with a 4:3 aspect
ratio onto a 10-foot (3.05-meter) high screen, the width of the screen must be at least 13.3
feet (4 meters).
Vidikron Vision Model 50 Owner’s Operating Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
In general, minimize or eliminate light sources directed at the screen. Contrast ratio in
your images will be noticeably reduced if light directly strikes the screen, such as when
a shaft of light from a window or floodlight falls on the image. Images may then appear
washed out and less vibrant.
Ambient Light
Other considerations and tips that can help improve your installation:
Other Considerations
•
Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
•
Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors, speakers,
power amplifiers and elevators.
Throw Distance Throw distance is the distance measured from your projector’s lens to the screen. This is
an important calculation in any projector installation as it determines whether or not you
have enough room to install your projector with a desired screen size and if your image
will be of the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and
multiplying it by the lens throw ratio. (The Model 50 has a lens throw ratio of between
1.82 and 2.42.)
�������������������������
������������������������������������������������������������
�
�
�
��
�
�
�
�
�
�
�
�
�
�
�
�
�
The result of this calculation tells you roughly how far back the projector should be positioned
from the screen in order to project a focused image large enough to fill the screen.
For example, with an 8-foot (96-inch) wide screen (the maximum recommended screen
width for this projector), the Model 50 has a throw distance range of between 174.72 inches
(4.44 meters) and 232.32 inches (5.90 meters).
Vidikron Vision Model 50 Owner’s Operating Manual
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Proper placement of the projector relative to the screen will yield a rectangular, perfectly-
centered image that completely fills the screen.
Vertical and Horizontal
Position
Ideally, the projector should be positioned perpendicular to the screen and in such a way
that the lens center is aligned with either the top or bottom edge of the screen area, and
centered horizontally.
The top of the projected image is even with the lens center when the projector is inverted
(ceiling-mounted). Likewise, the bottom of the projected image is aligned with the lens
center when the projector is upright (as in a floor installation).
Ceiling Installation
Ceiling
Height
Projection Distance
x
Lens Center
Lens Center
Screen
Floor Installation
Screen
Lens Center
Height
Lens Center
x
Projection Distance
Floor
If it is not possible to align the projector and screen as shown above, you can tilt the projector
at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For
a floor installation, turn the four adjustable feet on the bottom of the projector to adjust
the projector height and/or projection angle.
Adjusting the Projection Angle
If you do this, you may need to make keystone adjustments or vertically shift the image
using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer
to On-Screen Display Menus, later in this manual.
Vidikron Vision Model 50 Owner’s Operating Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another. In typical front and rear
screen installations the projector can be mounted to a secure and level surface, such as a
table or cart. Carts are useful when moving a projector during a presentation or from site
to site. If possible, lock the wheels when it’s in position to prevent it from being moved
during a presentation.
Mounting
CEILING MOUNT—The projector can also be inverted and suspended from the ceiling
using a specially designed ceiling mount fixture. This type of mounting is recommended
for fixed installations and for those that want the projector out of sight or have a limited
space for projector and audience.
Use only the Vidikron-approved ceiling mount kit designed for your projector.
In rear screen applications where space behind the projector is limited, a mirror may be
used to fold the optical path, as shown below. The position of the projector and mirror
must be accurately set. If you are considering this type of installation, contact your dealer
for assistance.
Folded Optics
Vidikron Vision Model 50 Owner’s Operating Manual
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
When connecting your equipment, make sure to:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly connected.
Connecting Video
Inputs
Video / S-Video / Component
(Interlaced Video)
(G) Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
V
( G )
B
B
R
R
R( R ) P
H
T
V
O U
1 2
12V
OUT
DVD Player
Vidikron Vision Model 50 Owner’s Operating Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
The RGB BNC input (labeled COMP 2 / RGB) supports two kinds of HDTV formats:
progressive component (DTV Y/PB/PR) and DTV RGB. The projector automatically detects
the resolution.
Progressive Component
(DTV Y/PB/PR)
(G)
Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
( G )
B
B
R
R
R( R ) P
H
V
O U T
1 2
12V
OUT
V
Green Blue Red
DTV Source
RGBHV (DTV RGB)
(G)
Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
( G )
B
B
R
R
R( R ) P
H
V
O U T
1 2
12V
OUT
V
Horz. Vert.
Green Blue Red
DTV Source
Vidikron Vision Model 50 Owner’s Operating Manual
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting a
Computer (GBRHV)
(G) Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
V
( G )
B
B
R
R
R( R ) P
H
T
V
O U
1 2
12V
OUT
Green Blue Red Horiz Vert
The projector supports the
following computer resolutions:
1024x768, 800x600 and 640x480.
PC or Notebook
(PC, RGB, Analog,
HD Component,
Progressive DVD)
Use an HDMI (High-Definition Multimedia Interface) cable to connect the projector to an
HDMI device.
Connecting an HDMI™
Device
(G) Y
Y
(B)PB/CB
/ C B P
(R)PR/C
/ C
H
V
V
( G )
B
B
R
R
R( R ) P
H
T
V
O U
1 2
12V
OUT
HDMI Source
(DVD player or HD
tuner with HDMI
or DVI out)
Vidikron Vision Model 50 Owner’s Operating Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
The Vision Model 50 ships with various types of AC power cords. Choose the one that is
appropriate to your locale.
Connecting to AC
Power
Plug the female end of the power cord into the AC receptacle on the rear of the projector
(AC 100V ~ 240V). Then, connect the other end to your AC power source.
Power
switch
Vidikron Vision Model 50 Owner’s Operating Manual
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
•
•
Turn on the main power switch on the rear
of the projector. The POWER LED will light
orange.
Turning on the Power
ON
OFF
Press the ON button on the remote control
to turn on the projector. The POWER LED
flashes orange during the warm up period,
then lights solid green.
S-VID
VIDEO
HDMI
COMP 1
COMP 2
RGB HD
•
•
“Searching….” appears on the screen before
the projector identifies the input signal,
and remains there until a valid signal is
detected.
If an incompatible input signal exceeds
the range of the projector, a “No signal
supported” message appears on the screen.
This message remains on the screen until
you change the input signal.
•
•
•
Press ZOOM and the arrow buttons (◄/►)
to adjust the projected image size.
Adjusting the Zoom,
Focus and Lens Shift
Press FOCUS and the arrow buttons (◄/►)
to focus the image.
Press LENS SHIFT and the arrow buttons
(▲/▼) to adjust the lens vertically.
•
To adjust the projector height or projection
angle, or to compensate for a mounting
surface that isn’t level, turn the four
adjustable feet on the bottom of the
projector.
Adjusting Projector
Height or Projection
Angle
Vidikron Vision Model 50 Owner’s Operating Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
•
•
•
Press MEM1 to recall custom memory
settings.
Selecting Video
Memory
Press ISF NT (Night) to recall ISF Night
settings.
Press ISF DAY to recall ISF Day settings.
NOTE: ISF settings must be calibrated
and stored by a certified ISF calibrator.
For more information, please go to www.
imagingscience.com.
•
Press DEF (Default) to restore factory
settings for the current source. An on-
screen confirmation message appears.
Press DEF again to confirm.
Select an aspect ratio that suits the format of
the video signal. The following aspect ratios are
available.
Selecting an Aspect
Ratio
•
•
•
ANA (Anamorphic): A 4:3 image is stretched
horizontally to fit a 16:9 screen. This setting is
for 16:9 DVDs and HDTV programs.
4 X 3 (Standard 4:3): The input signal is scaled
to fit a 4:3 display mode in the center of the
screen.
L-BOX (Letterbox): An image in letterbox
format is enlarged to fit a 16:9 full screen
display; the upper and lower portions are
compressed.
•
•
I-WIDE (IntelliWide): This setting transforms
a 4x3 image to a 16x9 image.
CINEMA: The image in the Letterbox mode is
enlarged to a 16x9 image and the upper and
lower portions are compressed.
•
C-FILL (Cinema Fill): A 2.35 image is stretched
vertically in both directions to fill a 16:9
image.
Vidikron Vision Model 50 Owner’s Operating Manual
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
•
•
•
Press MENU to open or close the on-screen
menu.
Using the Menus
Use the arrow buttons (▲,◄,▼,►) to select
menu items or make adjustments.
Press ENTER or ► to enter the setting of items
in the menu, or press EXIT to leave and save
the setting of items in the menu.
For more information on settings, See “On-
Screen Display Menus” on page 33.
•
•
When you turn on the projector, it searches
for the input source you selected last time.
Selecting the Input
Source
You may select the input source directly on
the remote control.
•
For PIP (Picture In Picture) and PBP (Picture
By Picture) purposes, there are two groups
of inputs separated by their display modes:
PIP / PBP Function
Video group: Video, S-Video and Component
Y/CB/CR inputs.
Graphic (HD) group: HDMI and RGB/
Component HD inputs.
•
•
•
•
PIP / PBP shows one input from the Graphic
group within or beside one input from the
Video group.
Press PBP to enable the PBP function. Press
PBP again to switch the screens left to right.
Press PBP again to turn PBP off.
Press ACTIVE to switch to the active window.
You can only change the input signal settings
in the active window.
Press PIP to enable the PIP function.
Press PIP again to switch the main window.
Press PIP again to turn PIP off.
•
•
Press PIP+ or PIP- to adjust the size of the
PIP window.
Adjust the position of the PIP window with
the arrow buttons (▲,◄,▼,►).
Vidikron Vision Model 50 Owner’s Operating Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
•
•
Press OFF to turn off the projector.
Turning off the Power
The POWER LED will blink green and the
fans will speed up for a quick cool-down. The
projector will not respond to any command
for 90 seconds.
•
The POWER LED will light solid orange once
the cooling down cycle has completed.
•
•
The fans will run for three minutes to cool.
You can turn the projector back on after
approximately two minutes.
Vidikron Vision Model 50 Owner’s Operating Manual
32
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
This unit is equipped with an on-screen display
Using the Menu
(OSD) menu for making adjustments and changing
settings. There are five menu languages; see
the Language setting under “Installation” on
page 40.
•
Press MENU to turn on/off the OSD menu.
NOTE: If the Main Menu is displayed, you can also press EXIT to turn it off.
•
•
Use the arrow buttons (▲,◄,▼,►) to select items in the menu or to make various
adjustments.
Press ENTER to select an item to change, or press EXIT to return to the previous
menu.
When the MENU button is pressed, the Main Menu (shown below) appears on the screen.
Use the ▲ or ▼ button to move to an item, then press ENTER to select it. The menus are
described more fully in the following sections.
Main Menu
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Picture Adjust: brightness, contrast, color
level, tint, sharpness, color temperature
and color select
Image Options: input selection, aspect
ratio, SD (480i) enhance, video filter, HD/
RGB adjust, blue enable, save/load saved
settings
Service
ISF Calibration
Projector Status: load default settings (no
confirm), sleep timer, lamp power, lamp
hours
Installation: OSD language, image
orientation, keystone correction, OSD
position, OSD timer, PIP/PBP setup,
background color
Service: white balance, gamma selection,
ICC adjust, image over-scan, video black
level, aperture control, image shift,
amplitude, fan control, lamp timer reset,
RS-232 baud rate, change IR remote code
ISF Calibration: picture adjust, white balance,
gamma selection, aperture control, blue
enable, save ISF settings, splash screen timer,
ISF splash screen enable
Vidikron Vision Model 50 Owner’s Operating Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Picture Quality
Adjustments
Picture Adjust
Brightness
26
15
31
14
2
Contrast
Color
Service
ISF Calibration
Tint
Sharpness
Color Temp.
Color Select
2
NTSC
To access basic picture quality adjustments, press MENU, select Picture Adjust and press
ENTER. The picture quality sub-menu then appears (see above).
To adjust a setting, highlight it with the ▲ or ▼ button and use the ◄ or ► buttons to
change the setting. When finished, press EXIT.
Select Brightness to adjust the black level of the projected image (0 = minimum;
Brightness
60 = maximum).
Select Contrast to adjust the white level of the projected image (0 = minimum;
Contrast
32 = maximum).
Select Color to adjust the color level (saturation) of the projected image (0 = minimum;
Color
64 = maximum).
Select Tint to adjust the hue of the projected image (0 = minimum; 30 = maximum).
Tint
Select Sharpness to adjust the sharpness of the projected image (-14 = minimum;
+20 = maximum). This setting has no effect if the Video Filter is set to 0 (refer to the next
section, Image Option).
Sharpness
Vidikron Vision Model 50 Owner’s Operating Manual
34
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
The Vision Model 50 has six memory settings for Color Temperature. Four of these settings
Color Temperature
are factory set to default as follows:
0 -- Original lamp color temperature
1 -- 5400 kelvins
2 -- 6500 kelvins
3 -- 8500 kelvins
4 -- Custom
5 -- Custom
Custom 4 and 5 memory are installer-adjustable and can be used to create custom settings.
There are nine adjustable “white balance” parameters available for the Custom 4 and 5
settings (three each for red, green and blue). These are described later in this section;
refer to “Service.”
NOTE: You must enter a passcode in order to enter the Service menu.
Choose Color Select from the Picture Adjust menu to select the color space that is
Color Select
appropriate for the source signal, to achieve optimal color balance.
If you select NTSC, HDTV or PAL, you can make further adjustments to individual color
characteristics in the ICC Adjust sub-menu under the Service menu, described later in
this section. (The Standard color select is factory-set and not adjustable.)
Vidikron Vision Model 50 Owner’s Operating Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Image Options
Image Option
Input Select
Aspect Ratio
SD Enhance
Service
Video Filter
ISF Calibration
HD/RGB Adjust
Blue Enable
Save Settings
Load Saved Settings
To access additional image settings, press MENU, then press the ▲ or ▼ arrows to highlight
Image Option and press ENTER. The Image Option sub-menu then appears (see above).
To select a source signal, highlight Input Select, press ENTER and select Video, S-Video,
Input Select
Component 1, Component 2, RGB-HD or HDMI. Then, press ENTER to confirm.
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Image Option menu and press ENTER. There are six aspect ratios available that
can be selected for video signal inputs:
Aspect Ratio
• Anamorphic
• Letterbox
The image is compressed vertically,
but anamorphic software will appear
properly proportioned. This is best
suited for use with 16:9 DVDs and HDTV
programming.
The image in the Letterbox mode is
stretched vertically, and the top and bottom
portion ‘blanked off’. This ratio is best suited
for LaserDisc movies or non-anamorphic
DVDs.
Active Image Area
Active Image Area
• Standard (4/3)
• IntelliWide
The input signal is scaled to fit in the
A 4:3 image is transformed into a 16x9
center of the 16:9 screen.
image.
Active
Image Area
Vidikron Vision Model 50 Owner’s Operating Manual
36
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
• Cinema
The image in the Letterbox mode is
enlarged to a 16x9 image and the upper
and lower portions are compressed.
• Cinema Fill
A 2.35 image is stretched vertically in both
directions to fill a 16:9 image.
The SD Enhance menu gives you options for improving
the quality of standard-definition, 480i images. (For
480p and higher-definition images, the controls in
this menu are disabled.) Keep in mind that these
controls add frequencies that are not present in the
original signal, and may make images appear “noisy”
if misused.
SD Enhance
SD Enhance
H Enhance
V Enhance
C Enhance
0
0
64
10
10
10
H Threshold
V Threshold
C Threshold
H Enhance/V Enhance: These controls can improve
the apparent horizontal and/or vertical resolution
of the image.
C (Chroma) Enhance: This control adds chroma (color
information) to the input signal and can make colors
appear more vibrant and saturated.
H Threshold/V Threshold/C Threshold: Set these to +11 or higher to activate the
enhancement controls described above. Generally, the higher the threshold, the more
noticeable the enhancements you make will be.
Video Filter
The Video Filter setting controls the behavior of the Sharpness control. The
available settings depend on the vertical resolution of the input signal, as follows:
•
•
With a 480i signal, you can apply the sharpness control to either the input signal (1),
the output signal (2), both (3) or neither (0).
With a 480p or higher-resolution signal, the sharpness control is applied only to the
output signal and only when you set the Sharpness filter to “on” (1).
Vidikron Vision Model 50 Owner’s Operating Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Press ENTER to display the HD/RGB Adjust menu. Use these
settings to fine-tune 480p and higher-resolution signals for
optimum picture quality.
HD/RGB Adjust
HD/RGB Adjust
Auto Adj. YES?
Freq.
0
+10
0
•
Auto: To adjust the phase, frequency and position
Phase
H.Pos.
V.Pos.
automatically, highlight “YES?” and press ENTER.
•
•
Freq.: Adjusts the frequency of the signal.
0
Phase: Adjusts the phase of the input signal (similar to
tracking on a VCR).
•
•
H. Pos.: Adjusts the horizontal position of the image.
V. Pos.: Adjusts the vertical position of the image.
NOTE: To adjust the image position with a 480i source, use the Image Shift controls in the Service
menu, described on page 41.
Press the ▲ or ▼ arrow buttons to turn on or off the Blue Enable feature. Blue Enable
removes all red and green color information from the image, and is useful for color-
calibrating the projector or other video components.
Blue Enable
Save Settings Once the desired adjustments have been made, select Save Settings to save these settings
into the “Custom 1” memory location.
Load Saved Settings
To recall stored custom image quality settings, select Load Saved Settings and choose
“Custom 1,”“ISF Night” or “ISF Day.”
Vidikron Vision Model 50 Owner’s Operating Manual
38
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Projector Status
Projector Status
Default
Sleep Timer
Lamp Power 200 W
Lamp Hours +8 Hours
0 Minutes
Load
Service
30 Minutes
ISF Calibration
To load default settings, configure the sleep timer or adjust the lamp, press MENU, then
press the ▲ or ▼ arrows to highlight Projector Status and press ENTER. The Projector
Status sub-menu will then appear (see above). Press EXIT to return to the previous menu
or press MENU to close all menus.
Default
To restore the default image settings for the current input source ONLY, press the ▲ or ▼
arrow buttons to highlight “Load,” then press ENTER.
The Sleep Timer automatically puts the projector into standby mode after the amount of
time you specify here. (A warning appears on-screen one minute before this is to occur.)
Sleep Timer
Press the ◄ or ► arrows to set the timer for anywhere from 10 minutes to 3 hours, in 10-
minute increments. To disable the Sleep Timer, set it to 0.
Select Lamp Power from the Set Up MENU to adjust the lamp output level. You can choose
to run the lamp as bright as possible (250W; this is the default setting) or you can choose
the lower (200W) setting. Generally, lower lamp output can prolong the life of the lamp,
but decreases brightness.
Lamp Power
Lamp Hours indicates how long the currently-installed lamp has been in service. (This
Lamp Hours
part of the menu is read-only.)
Vidikron Vision Model 50 Owner’s Operating Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Installation
Language
Installation
Picture Configuration
Keystone
OSD Position
OSD Timer
Service
ISF Calibration
PIP/PBP Setup
Background Color
To access the Installation menu, press MENU, then press the ▲ or ▼ arrows to highlight
Installation and press ENTER. The Installation sub-menu will then appear (see above).
Press EXIT to return to the previous menu or press MENU to close all menus.
NOTE: When you change a setting in the Installation menu, the change takes effect immediately;
you do not need to press ENTER afterwards. (Press EXIT to return to the previous menu or MENU
to exit.)
Press the ▲ or ▼ arrows to select from the available Languages: English, French, Spanish,
Language
German and Italian.
Press the ▲ or ▼ arrows to select the projector’s Picture Configuration. The projector
can be installed on a ceiling or in a rear-screen configuration with one or more mirrors.
There are four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
Picture Configuration
To correct distortion resulting from the angle of the projection, select Keystone and use
Keystone
the ◄ or ► arrows to make the image rectangular.
NOTE: Vidikron recommends that the keystone feature not be used unless absolutely necessary, as
it may cause artifacts in the image.
OSD Position Press the ◄ or ► arrows to adjust the horizontal and vertical position of the OSD.
OSD Timer Press the ◄ or ► arrows to set the OSD Timer. This timer controls how long the menus
remain on-screen after selecting them. Select from 0 to 60 seconds, in 3-second increments.
When you set the OSD to 0, the menus remain on-screen until you hide them by pressing
MENU.
Vidikron Vision Model 50 Owner’s Operating Manual
40
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
PIP / PBP Setup
To use the Picture-in-Picture or Picture-by-Picture features, press the ▲ or ▼ arrow
buttons to select PIP/PBP Setup, then press ENTER.
Select PIP/PBP Enable from the PIP/PBP Setup menu. Press ▲ or ▼ to select Off or
PIP/PBP Enable
On, then press EXIT.
PIP/PBP Setup
PIP/PBP Enable
PIP Setup
PBP Setup
Press the ▲ or ▼ arrows to select PIP Setup, then press ENTER.
Press the ▲ or ▼ arrows to select PIP Off, Graphic in Video or Video in Graphic, then
press ENTER.
PIP Setup
PBP Setup
Press the ▲ or ▼ arrows to select PBP Setup, then press ENTER.
Press the ▲ or ▼ arrows to select PBP Off, Graphic by Video or Video by Graphic,
then press ENTER. Press EXIT to return to the Installation menu.
Press the ▲ or ▼ arrows to select the image Background Color (grey, blue or white). The
Background Color
Background Color appears when no incoming signal is present.
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Service
Service
White Balance
Gamma Selection
ICC Adjust
Image Over Scan
Video Black Level
Aperture Control
Image Shift
Service
ISF Calibration
Amplitude
Horizontal Masking
Fan Control
Lamp Reset Timer
RS-232 Baud Rate
Remote Control
Return to User OSD
To access advanced picture quality adjustments and projector controls, use the up- or
down-arrow buttons to highlight Service and press ENTER. Use the number buttons on
the remote to enter the Service menu passcode when prompted and press ENTER again.
Then, press MENU on the remote control.
NOTE: You only need to enter the Service menu passcode the first time you select that menu after
turning on the projector.
Vidikron Vision Model 50 Owner’s Operating Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Gain: Use the Gain controls in the White Balance sub-menu to correct color imbalances
in the bright areas of the image. A good way to do this is to use a test pattern consisting
mostly of solid white areas, such as an 80 IRE “window” pattern. If the white areas contain
traces of red, green or blue, decrease the Gain for that color.
White Balance
Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalances
in the dark areas of the image. A good way to do this is to use a test pattern consisting
mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain traces
of red, green or blue, decrease the Offset for that color.
Gamma: “Gamma” is a global setting that determines how gray shades are displayed
between minimum input (black) and maximum input (white) for all signals. A good gamma
setting helps to optimize blacks and whites while ensuring smooth transitions for the “in-
between” values utilized in other grays. Unlike “Brightness” and “Contrast” controls, the
overall tone of your images can be lightened or darkened without changing the extremes
and all images will be more vibrant while still showing good detail in dark areas when
using the “Gamma” control.
In all but the most unusual situations, the appropriate “Gamma Selection” (see below) will
produce accurate colors and a satisfying contrast level. However, it is sometimes necessary
to adjust the red, blue and green gamma curves individually. To do this, select Gamma
from the White Balance sub-menu and use the left- and right-arrow buttons to manipulate
the on-screen slidebars.
Save Color Temp.4/Save Color Temp.5: When you are finished adjusting the Gamma, Gain
and Offset, select Save Color Temp.4 or Save Color Temp.5 to store your settings. To recall
them, set the Color Temperature to +4 or +5 in the Picture Adjust menu (refer to “Picture
Quality Adjustments,” earlier in this section).
Gamma Selection The default gamma setting of 2.2 is correct for almost all signals and conditions. If excess
ambient light washes out the image and it becomes difficult or impossible to see details
in dark areas, lower the gamma setting to compensate. This will improve contrast while
maintaining good details for blacks. Conversely, if the image is washed out and unnatural,
with excessive detail in black areas, increase the setting. Again, good gamma improves
contrast while maintaining good details for blacks and whites.
ICC Adjust Use the ICC Adjust controls to customize the stored NTSC, HDTV and/or PAL color select
characteristics. To do this, select the color select to modify. Then, select a component color
(Red, Green, Blue, Yellow, Cyan or Magenta).
For each component color, you can adjust the following:
Intensity: This slidebar adjusts the intensity -- also known as luminance -- of a given
color.
Sat.: This slidebar adjusts the color saturation level -- the amount of that color in a video
image. Lower settings produce less saturated colors; a setting of “0” removes that color
from the image entirely. If the saturation is too high, that color will be overpowering and
unrealistic.
Hue: This slidebar adjusts the red/green color hue for true color reproduction of video
signals. For best results, adjust tint while displaying an external color bars test pattern.
Otherwise, it is recommended that Hue remain at its default setting.
When you have finished customizing the color select, select Store Setting and press
ENTER.
Vidikron Vision Model 50 Owner’s Operating Manual
42
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Image Over Scan pushes the outside edge of the active picture area of the video signal
out beyond the edge of the display area.
Image Over Scan
Some television programs are produced based on the assumption that older television
sets may not display the outer edges of the broadcast picture area. Over scan effectively
trims away these inactive, outer edges and enlarges the remaining portion of the image
to fill the display area.
Use the on-screen slidebar to set the desired amount of over scan.
For HDTV, DVDs and other video sources, Over Scan is generally not necessary or
desirable.
This control compensates for incoming elevated black levels present in certain video
signals, and ensures that blacks in the display are neither “crushed” (where dark grays
appear black) nor excessively elevated (where blacks appear dark gray). By default, the
projector automatically determines the best setting according to the type of incoming
video signal:
Video Black Level
•
0 IRE – Used for DVD output with “enhanced black,” SECAM, most PAL standards and
Japanese NTSC.
•
7.5 IRE – Used for most NTSC video signals.
For some types of video, you may want to override the setting. Generally, if black appears
crushed when brightness = 30, choose “0 IRE”. If black appears excessively elevated, use
“7.5 IRE”.
The Aperture Control lets you control the motorized aperture lens iris. Press the ► arrow
to raise contrast and decrease brightness; press the ◄ arrow to lower contrast and increase
brightness.
Aperture Control
The contrast ratio is the measurement of the difference between the brightest whites and
the darkest blacks a display can show. The Aperture Control lets you adjust the contrast
level to allow for ambient lighting levels within a room which may affect color detail.
The Image Shift menu allows you to precisely center the image on the screen. (These
controls are available only with a 480i source signal.)
Image Shift
Horizontal: This control moves the image right or left within the area of available pixels.
Vertical: This option moves the image up or down within the area of available pixels.
NOTES:
1. To adjust the image position with a 480p or higher-resolution source, use the HD/RGB Adjust
controls in the Image Option menu, described on page 36.
2. The values shown represent where the approximate center of the image lies in relation to the
total number of pixels available horizontally or vertically. This varies widely according to the
signal; watch the image while adjusting.
The Amplitude menu allows you to fine-tune the image aspect ratio by stretching it
horizontally or vertically, in small increments. The Horizontal control adjusts the image
width while keeping the height constant. Similarly, the Vertical control adjusts the image
height while keeping the width constant.
Amplitude
This menu item is reserved for future use.
Horizontal Masking
Vidikron Vision Model 50 Owner’s Operating Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Select Fan Control from the Service Menu to control the operation of the projector’s
Fan Control
cooling fan.
Mode: In most cases, the default Fan Control Mode (Auto Normal) will maintain the correct
operating temperature. If the lamp frequently turns off due to overheating, or in certain
high-altitude operating environments, you may need to change this setting to Auto Hi.
Altitude or Manual.
Fan Speed: If you set the Fan Mode to Manual, select Fan Speed and use the on-screen
slidebar to adjust the speed.
After changing either of these settings, press EXIT to return to the previous menu.
When you replace the projector lamp, you should also reset the lamp timer. To do this, select
Lamp Reset Timer from the Set Up menu. Press the right-arrow button on the remote to
highlight “Yes,” then press ENTER to confirm the reset.
Lamp Reset Timer
NOTE: Reset the Lamp Timer ONLY after you replace the lamp. Otherwise, the reported “Lamp
Hours” will be inaccurate.
WARNING! Do not exceed the recommended lamp life of 2000 hours. An old lamp becomes
increasingly fragile and prone to sudden failure.
Press the ▲ or ▼ arrows to select the projector’s RS-232 Baud Rate. This function is used
to change the transfer rate of the RS-232 connection. (This setting must match the data
rate of the device connected to the RS-232 input.)
RS-232 Baud Rate
Remote Control
The Remote Control menu shows you the primary and secondary infrared (IR) codes assigned
to the Vision Model 50. The Primary IR code is permanently set to +20. The secondary IR
code is also +20.
You can change the secondary IR code if either:
•
Another device in the theater (a DVD player, for example) is responding to commands
from the Model 50 remote control in ways that are unpredictable or undesirable.
•
You have multiple Model 50 projectors and want to control them independently, as
opposed to broadcasting commands from a single remote to all of them. In this scenario,
you can use multiple remotes programmed to use different IR codes. Or, you can use
a single remote and change the IR code as needed to address a specific projector.
When you change the secondary IR code, the remote sends that code instead of the
primary IR code.
NOTE: The Remote Control menu is read-only and need not be visible in order to change the
secondary IR code.
To simultaneously change the secondary IR code and
synchronize that remote with a projector, point the remote at
the projector, then press and hold ◄ and ► simultaneously
for five seconds. The Remote Control edit window, shown at
right, appears. Type a new, two-digit code.
Remote Control
Secondary
20
The procedure for changing the secondary IR code on the remote only is the same, except
that you point the remote away from the projector.
To exit the Service menu, use the up- or down-arrow buttons to highlight Return to User
Return to User OSD
OSD and press ENTER.
To return to the Service menu, select it from the Main Menu, press ENTER twice, then press
MENU on the remote control. (You do not need to re-enter the passcode.)
Vidikron Vision Model 50 Owner’s Operating Manual
44
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
The Vision Model 50 has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends
that setup and calibration be performed by an ISF certified installation technician.
ISF Calibration
All signal types require separate processing. Therefore, you need to calibrate each and
every input separately.
To access the ISF Calibration menu, use the up- or down-arrow buttons to highlight ISF
Calibration and press ENTER. Use the number buttons on the remote control to enter the
ISF Calibration menu passcode, then press ENTER again.
NOTE: You only need to enter the ISF Calibration menu passcode the first time you select that
menu after turning on the projector.
Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
ISF Calibration
Picture Adjust
White Balance
Gamma Selection
Aperture Control
Blue Enable
Service
ISF Calibration
Save ISF Settings
Splash Screen Timer
ISF Enable
Return to User OSD
These settings are described in the “Picture Quality Adjustments” section (refer to
page 34).
Picture Adjust
These settings are described in the previous section, “Service.”
These settings are described in the previous section, “Service.”
This setting is described in the previous section, “Service.”
White Balance
Gamma Selection
Aperture Control
This setting is described in the “Image Options” section (refer to page 36).
Blue Enable
When you have finished calibration, select Save ISF Settings and choose “Save ISF Night“
Save ISF Settings
or “Save ISF Day” to store your settings.
To recall stored custom image quality settings, select Load Saved Settings from the Image
Option menu (refer to “Image Options,” earlier in this section) and choose “Custom 1,”“ISF
Night“ or “ISF Day.” Or, simply use the corresponding buttons on the remote control (MEM1,
ISF NT and ISF DAY respectively).
Vidikron Vision Model 50 Owner’s Operating Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menus
Splash Screen Timer Press the ◄ or ► arrows to set the Splash Screen Timer. This timer controls how long the
startup (ISF and Vidikron logo) image stays on-screen after you turn on the projector. Select
from 5 to 60 seconds, in 1-second increments. When finished, press EXIT.
Use ISF Enable to control the display of the ISF logo on the Vision 50 splash screen upon
ISF Enable
power-up.
CALIBRATED FOR:
Vidikron Vision Model 50 Owner’s Operating Manual
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Replacement
The lamp should be replaced when it reaches the end of its life (typically 2000 hours), or
sooner if a noticeable degradation in brightness occurs.
1. Turn off the projector and unplug the power cord.
Allow the projector to cool down for approximately
45 minutes prior to removing the lamp assembly for
replacement.
2. Remove the three screws from the lamp cover.
3. Remove the lamp cover.
4. Remove the two screws from the lamp module.
5. Pull the lamp module straight out to remove it.
6. Insert the new lamp module securely and replace the
two screws.
7. Replace the lamp cover at the top side first as shown
and secure it with the three screws.
8. Turn on the power and go into the Service/Reset Lamp
Timer menu to reset the lamp timer. Refer to “Service”
in the previous section, On-Screen Display Menus.
Vidikron Vision Model 50 Owner’s Operating Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Replacement
This page is intentionally left blank.
Vidikron Vision Model 50 Owner’s Operating Manual
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
REMEDY
The projector does There is no power from the Plug the power cord into the
not turn on
power cable.
AC power socket on the rear of
the projector and an electrical
outlet.
The power switch is not turned Turn on the power switch.
on.
The projector was turned on Wait until projector completes
again within the cool down the cool down time.
time.
Lamp cover is not attached Correctly attach the lamp
well.
The lamp cover is not correctly Correctly attach the lamp
attached. cover.
cover.
No picture
The projector is not correctly Check the connection.
connected to the input source
device.
The input signal has not been Select the correct input signal
correctly selected.
with the SOURCE input keys: VID,
S-VID, COMP1, COMP2, RGBHD
or HDMI.
TEMP LED or LAMP LED Please contact your Vidikron
blinking. dealer for assistance.
Image is unstable The connection cables are not Correctly connect the cables to
connected to the projector. the appropriate terminals.
The projection lens is not Adjust the focus of the projection
correctly focused. lens with the focus ring.
The projector and the screen are Adjust the projection angle and
Picture is blurred
not aligned squarely.
direction, and the height of the
projector.
Remote control
does not work
correctly
The batteries are exhausted.
Replace both batteries with new
ones.
LAMP LED blinks
red
The cooling fan does not work Please contact your Vidikron
well. dealer for assistance.
The temperature inside the Check that the ventilation holes
projector is extremely high. are not blocked.
The lamp has exceed its specified Replace the lamp with a new
LAMP LED blinks
red; POWER LED is usage hours.
one.
green
The lamp has burned out.
Replace the lamp with a new
one.
Vidikron Vision Model 50 Owner’s Operating Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
This page is intentionally left blank.
Vidikron Vision Model 50 Owner’s Operating Manual
50
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Setup
1. Connect a D-Sub 9-pin female-to-RJ-11 adapter (not included) to a COM port on
your PC. The adapter must be wired as follows:
Connecting RS-232 to
the Projector
RS-232 Pin Assignments
D-Sub 9-pin female
4-pin RJ-11
Function
Transmit Data
Receive Data
Ground
2
2
3
3
5
1, 4
--
1, 4, 6, 7, 8, 9
Not Connected
2. Connect the COM port to the RS-232 port on the projector. Use a standard, 4-wire
RJ-11 telephone cable, wired straight-through.
RJ-11 to D-Sub 9-pin (not included)
Yellow
Yellow
5
4
3
1
2
Green
Green
6
9
8
7
D-Sub 9-pin female
1
2
3
4
Black
Red
Black
Red
3. Start a terminal session on your PC using a terminal-emulation program, such as
HyperTerminal.
4. Configure the COM port on the PC as follows: no parity, 8 data bits, 1 stop bit and
no flow control. Set the baud rate to match that of the projector (115200, 38400 or
9600).
5. Press ENTER. You should see a command prompt (>) in the terminal window.
6. Type the desired command from the table that follows and press ENTER. For example,
to set the aspect ratio to Letterbox, type x063x <Enter>.
Vidikron Vision Model 50 Owner’s Operating Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Setup
NOTES:
RS-232C Control
Codes
1. All codes are in the ASCII format.
2. A carriage return is required after each command.
3. The projector will not accept RS-232 commands for 20 seconds after it is turned
on or off.
Code Function
Code Function
x049x Load default of current source
x051x Single source, full-screen
x052x PIP - graphics on video
x053x PIP - video on graphics
x054x PBP - graphics by video
x055x PBP - video by graphics
x056x PIP - increase sub-window size
x057x PIP - decrease sub-window size
x058x Set PIP/PBP active window
x061x Anamorphic (16:9) aspect ratio
x062x Standard (4:3) aspect ratio
x063x Letterbox aspect ratio
x001x Power On
x002x Power Off
x003x Menu
x004x Enter
x005x Exit
x006x Up (arrow button)
x007x Down (arrow button)
x008x Left (arrow button)
x009x Right (arrow button)
x011x Show active source and
aspect ratio information
x021x Keypad 1
x022x Keypad 2
x023x Keypad 3
x024x Keypad 4
x025x Keypad 5
x026x Keypad 6
x027x Keypad 7
x028x Keypad 8
x029x Keypad 9
x030x Keypad 0
x064x IntelliWide aspect ratio
x065x Cinema aspect ratio
x066x Cinema Fill aspect ratio
x071x RS-232 baud rate = 9600
x072x RS-232 baud rate = 38400
x073x RS-232 baud rate = 115200
x081x Image orientation = floor front
x082x Image orientation = ceiling front
x083x Image orientation = floor rear
x084x Image orientation = ceiling rear
x091x Lamp Power = 200W
x031x Store image settings to
Memory 1
x032x Store image settings to
ISF Night
x092x Lamp Power = 250W
x121x OSD Language = English
x122x OSD Language = French
x123x OSD Language = Spanish
x124x OSD Language = German
x125x OSD Language = Italian
x033x Store image settings to
ISF Day
x046x Restore image settings from
Memory 1
x047x Restore image settings from
ISF Night
x048x Restore image settings from
ISF Day
Vidikron Vision Model 50 Owner’s Operating Manual
52
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Setup
Code Function
RS-232C Control
x131x Switch to Composite input
x132x Switch to S-Video input
x133x Switch to RGB-HD input
x134x Switch to DVI input (HDMI)
x135x Switch to Component 1 input
x136x Switch to Component 2 input
x156x Background Color = Grey
x157x Background Color = Blue
x158x Background Color = White
x181x Toggle Blue Image on/off
x281x Vertical Lens Shift = Up
x282x Vertical Lens Shift = Down
x283x Zoom In
Codes
(continued)
x284x Zoom Out
x285x Focus (rotate lens to right)
x286x Focus (rotate lens to left)
x287x VAC = Full On (open)
x288x VAC = Full Off (closed)
Vidikron Vision Model 50 Owner’s Operating Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Setup
This page is intentionally left blank.
Vidikron Vision Model 50 Owner’s Operating Manual
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Projector Type:
Native Resolution:
Aspect Ratios:
Digital Light Processing™ (DLP™), Single-Chip DMD™
1280 x 720 (16:9)
4:3, Letterbox, 16:9 Anamorphic, IntelliWide™, Cinema,
CinemaFill™
Video Standards:
DTV Compatibility:
Scan Frequency:
NTSC, PAL, SECAM
480p, 576p, 720p, 1080i
Horizontal: 15-80 kHz;
Vertical: 50-100 Hz
Picture Size
(16:9 screens):
Recommended Width: 72 in. (1.83 m) to 96 in. (2.44 m)
Capable of screen widths between 48 in. (1.22 m) and 240 in.
(6.10 m)
Throw Distance
1.82 to 2.42 x Screen Width
(Factor x Screen Width):
Horizontal and
Vertical Offset:
- Lens is fixed horizontally
- Lens can shift vertically 100% up or down
- Horizontal and/or vertical image shift via OSD controls
Lamp:
250W
Lamp Life:
Inputs:
2000 hours
(1) Composite Video, (1) S-Video, (1) RGB/Component (via BNC),
(1) RCA Component Video, (1) HDMI, (1) RS-232
12V Output:
Max. 0.25 Amps, active when the projector is on
Vidikron Vision Model 50 Owner’s Operating Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Brightness and
Contrast:
Cinema Standards Measurement System (CSMS) Specifications
- Brightness: 14.7 to 21.5 foot-Lamberts (fL)
- Contrast Ratio: 195:1 to 218:1
These measurements are taken from the projector in a controlled,
home theater environment. All measurements are made to ANSI/
NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video
Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is
calibrated to a color temperature of 6,500K and has a minimum of 150
hours of usage.
The foot-Lambert (fL) is the unit of measurement used in commercial
movie theaters to express image brightness at the screen surface. The
Society of Motion Picture and Television Engineers (SMPTE) specifies
16 fL as the target image brightness for film-based projectors using
an open gate (without film in the projector). More importantly, today
SMPTE specifies 12 fL as the target image brightness in Digital Cinema
theaters. The foot-Lambert measurement is dependent on screen size,
screen gain and projector light output.
Home Theater Calibration Specifications
- Light Output: 449 to 585 ANSI Lumens
- Contrast Ratio: 195:1 to 218:1
These specifications are obtained by calibrating the projector as
described above for CSMS measurements.
Industry-Standard Specifications
- Light Output: 1225 ANSI Lumens
- Contrast Ratio: 1400:1 to 3000:1
These are typical projector brightness and contrast specifications
found in most companies’sales literature. Vidikron includes these
measurements in its literature to allow for direct comparison with other
manufacturers’projectors. These measurements are typically taken
at 9,000K to 13,000K to get expected performance data when the
projector is used in professional, commercial and industrial displays.
Power Requirements:
100 to 240V AC, 50/60Hz, 330W
Operating Environment: 41ºF to 95ºF (5ºC to 35ºC); 20 to 80% humidity (non-condensing)
Dimensions:
Width: 22.00 in. (560.5 mm)
Depth: 18.90 in. (480.0 mm)
Height (without feet): 8.00 in. (203.0 mm)
Height (with feet): 8.80 in. (222.5 mm)
Weight
Net: 43.0 lbs. (19.5 kg);
(including lens):
Shipping: 55.1 lbs. (25.0 kg)
Regulatory Approvals: Complies with FCC Class B, CE, C-Tick
Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery
to the end user.
Lamp Warranty: 1000 hours or six (6) months, whichever comes
first.
Specifications are subject to change without notice.
Vidikron Vision Model 50 Owner’s Operating Manual
56
Download from Www.Somanuals.com. All Manuals Search And Download.
RUMA-011145
rev. 09-27-05 v1.0
Vidikron
2900 Faber Street
Union City, CA 94587
510-324-5900
Fax 510-324-5905
1-888-4-VIDIKRON
SERIAL NUMBER
Download from Www.Somanuals.com. All Manuals Search And Download.
|