Vidikron Computer Monitor VP 42 User Manual

VP-42 / VP-42HD / VP-50 / VP-60

Owner’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

» Introduction to the Vidikron PlasmaView™

VP-42 / VP-42HD / VP-50 / VP-60 Flat Panel Display Monitor

Vidikron presents a full line-up of high performance plasma display monitors, perfect for every application. Three models, 42, 50 and

60 inch, all share common style, engineering and design, features and state-of-the-art performance.

These three popular sizes all feature HDTV capable, 16:9 native resolution display panels with advanced engineering innovations to

give you the brightest, clearest images possible. Vidikron’s superior video processing with 3:2 film detection circuitry is built into

the monitors and provides exceptional detail and artifact-free video enhancement, elevating even standard NTSC material to near HD

quality.

Multiple aspect ratio control includes Vidikron’s IntelliWide mode, offering the ability to view standard video formats in widescreen

without loss of image quality. IR and discrete RS-232 controls facilitate glitch-free custom installation, while Dynamic Pixel

Protection™ helps to protect the plasma panel from stationery image burn.

A generous number of inputs and the sleekest styling around make these flat panel display monitors a great value and the ideal choice

for discerning viewers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

» The features you’ll enjoy include:

• 16:9 Native Resolution:

Options:

• Wall mount unit

• Tilt mount unit

• Tablestand

853 x 480 (VP-42)

1024 x 768 (VP-42HD)

1365 x 768 (VP-50, VP-60)

• DVI Input with HDCP

• IR and discrete RS-232 Control for custom installation integration

• Dynamic Pixel Protection™ to help prevent stationary image burn

• HDTV Ready

• Less than 5 inches thin

Contents of the package:

• Plasma display monitor

• Power cord

• Remote control with two AAA batteries

• User’s manual

• Safety metal ﬁttings*

• Screws for safety metal ﬁttings*

• Ferrite core (small x 2. large x 2), bands

• Cable clamps

*These are ﬁttings for fastening the unit to a wall to prevent tipping

due to external shock when using the tablestand (optional). Fasten

the safety ﬁttings to the holes in the back of the plasma using the

safety ﬁtting mount screws.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION

» Precautions

WARNING

Please read this manual carefully before using your plasma

monitor and keep the manual handy for future reference.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO

NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS,

UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE

ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER. NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

This symbol warns the user that uninsulated

voltage within the unit may have sufﬁcient

magnitude, it is dangerous to make any kind of

contact with any part inside this unit.

This symbol alerts the user that important

literature concerning the operation and

maintenance of this unit has been included.

Therefore, it should be read carefully in order to

avoid any problems.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Information

» Warnings and Safety Precautions

No maintenance other than cleaning is required. Please see the section “Plasma monitor cleaning procedure” on page 7.

The plasma display panel consists of ﬁne picture elements (cells). There may be some cells that do not produce light or remain lit.

For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. To avoid shock and ﬁre

hazards:

1. Provide adequate space for ventilation to avoid internal heat build-up. Do not cover rear vents or install the unit in a closed cabinet or

shelves. If you install the unit in an enclosure, make sure there is adequate space at the top of the unit to allow hot air to rise and escape.

If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn off the

power to the monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a

cooler location, and wait for 60 minutes to cool the monitor. If the problem persists, contact your dealer for service.

2. Do not use this unit’s polarized plug with extension cords or outlets unless the prongs can be completely inserted.

3. Do not expose the unit to water or moisture.

4. Avoid damage to the power cord, and do not attempt to modify the power cord.

5. Unplug the power cord during electrical storms or if the unit will not be used over a long period.

6. Do not open the cabinet which has potentially dangerous high voltage components inside. If the unit is damaged in this way the

warranty will be void. Moreover, there is a serious risk of electric shock.

7. Do not attempt to service or repair the unit. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons

attempt service or open the back cover. Refer all service to authorized Service Centers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Information

» To avoid damage and prolong operating life:

NOTE:

When you connect a computer to this monitor, use an RGB cable

including the ferrite core on both ends of the cable. And regarding

DVI and power cable, attach the supplied ferrite cores. If you do not

do this, the monitor will not conform to mandatory FCC standards.

Attaching the ferrite cores: Set the ferrite cores on both ends of

the DVI cable (not supplied), and both ends of the power cable

(supplied). Close the lid tightly until the clamps click. Use the

band to fasten the ferrite core (supplied) to the DVI cable.

1. Use only with 120V 50/60Hz AC power supply. Continued

operation at line voltages greater than 120 Volts AC will shorten

the life of the unit, and might even cause a ﬁre hazard.

2. Handle the unit carefully when installing it and do not drop.

3. Set the unit away from heat, excessive dust, and direct sunlight.

4. Protect the inside of the unit from liquids and small metal

objects. In case of accident, unplug the power cord and have it

serviced by an authorized Service Center.

DVI cable (not supplied)

Connector

band

5. Do not hit or scratch the panel surface as this causes ﬂaws on

the surface of the screen.

core (small)

Power cable (supplied)

6. Forcorrectinstallationandmountingitisstronglyrecommended

to use a trained, authorized dealer.

core (large)

7. As is the case with any phosphor-based display (like a CRT

monitor, for example) light output will gradually decrease over

the life of a Plasma Display Panel.

core (large)

8. To avoid sulfurization it is strongly recommended not to place

the unit in a dressing room in a public bath or hot spring bath.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Information

* Change the position of the menu display from time to time.

» Plasma monitor cleaning procedure:

* Always power down the monitor when you are ﬁnished using

it.

If the plasma monitor is in long term use or continuous operation

take the following measures to reduce the likelihood of phosphor

burn:

1. Use a soft dry cloth to clean the front panel and bezel area.

Never use solvents such as alcohol or thinner to clean these

surfaces.

2. Clean plasma ventilation areas with a vacuum cleaner with a

soft brush nozzle attachment.

* Lower the Brightness and Contrast levels as much as possible

without impairing image readability.

3. To ensure proper ventilation, cleaning of the ventilation areas

must be carried out monthly. More frequent cleaning may be

necessary depending on the environment in which the plasma

monitor is installed.

* Display an image with many colors and color gradations (i.e.

photographic or photo-realistic images).

* Create image content with minimal contrast between light and

dark areas, for example white characters on black backgrounds.

Use complementary or pastel color whenever possible.

Recommendations to avoid or minimize phosphor burn-in:

Like all phosphor-based display devices and all other gas plasma

displays, plasma monitors can be susceptible to phosphor burn

under certain circumstances. Certain operating conditions, such

as the continuous display of a static image over a prolonged

period of time, can result in phosphor burn if proper precautions

are not taken. To protect your investment in this plasma monitor,

please adhere to the following guidelines and recommendations

for minimizing the occurrence of image burn:

* Avoid displaying images with few colors and distinct, sharply

deﬁned borders between colors.

NOTE: BURN-INS ARE NOT COVERED BY THE

WARRANTY

Contact your dealer for other recommended procedures that will

best suit your particular application needs.

* Always enable and use your computer’s screen saver function

during use with a computer input source.

* Display a moving image whenever possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

Congratulations on your purchase of a Vidikron video product and

welcome to the Vidikron family! With proper installation, setup

and care, you should enjoy many years of unparalleled video

performance. This is a LIMITED WARRANTY as defined in the

Magnuson-Moss Warranty Act. Please read it carefully and retain it

with your other important documents.

in the 4:3 aspect ratio mode (black or gray stripes, but no picture

information is present on the left and right edges of the screen) are

used as infrequently as possible. This will prevent permanent image

burns on your plasma display panel, which can be seen permanently

under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and

computer screens with stationary tool bars and icons. (This is why

computers are equipped with screen savers – to prevent still images

from burning into the monitor’s phosphors after being displayed

continuously for an extended period of time).

WHAT IS COVERED UNDER THE TERMS OF THIS

LIMITED WARRANTY:

SERVICE LABOR: Vidikron will pay for service labor by a Vidikron

Authorized Service Center when needed as a result of manufacturing

defect for a period of one (1) year from the effective date of delivery

to the end user.

PARTS: Vidikron will provide new or rebuilt replacement parts for

the parts that fail due to defects in materials or workmanship for a

period of one (1) year from the effective date of delivery to the end

user. Such replacement parts are then subsequently warranted for the

remaining portion (if any) of the original warranty period.

Normal viewing material such as television/satellite broadcasts,

videotape or DVDs (not put into pause for extended periods of time)

will not cause damage to your display under normal conditions.

Many DVD players are also equipped with screen savers for this

reason.

This Limited Warranty only covers failure due to defects in materials

and workmanship that occur during normal use and does not cover

normal maintenance. This Limited Warranty does not cover cabinets

or any appearance items; failure resulting from accident, misuse,

abuse, neglect, mishandling, misapplication, faulty or improper

installation or setup adjustments; improper maintenance, alteration,

improper use of any input signal; damage due to lightning or power

line surges, spikes and brownouts; damage that occurs during

shipping or transit; or damage that is attributed to acts of God. In the

case of remote control units, damage resulting from leaking, old,

WHAT IS NOT COVERED UNDER THE TERMS OF THIS

LIMITED WARRANTY:

Image burn-in on plasma display panels are specifically excluded

from coverage under this Limited Warranty. Image burn-in is the

result of misuse of the product and therefore cannot be repaired

under the terms of this Limited Warranty.

TO AVOID IMAGE BURN-IN:

Please ensure that still images are left on your plasma display panel

for no more than a few minutes. Also ensure that images displayed

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

IMPORTANT: WARRANTY REGISTRATION:

Please fill out and mail your warranty registration card. It is

imperative that Vidikron knows how to reach you promptly if we

should discover a safety problem or product update for which you

must be notified.

damaged or improper batteries is also excluded from coverage under

this Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS

VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON

AUTHORIZED DEALERS. ALL OTHER PRODUCTS ARE

SPECIFICALLY EXCLUDED FROM COVERAGE UNDER

THIS LIMITED WARRANTY. MOREOVER, DAMAGE

RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER

INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED

FROM COVERAGE UNDER THIS LIMITED WARRANTY.

CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER

TO OBTAIN SERVICE:

Repairs made under the terms of this Limited Warranty covering

your Vidikron video product will be performed at the location of the

product, during usual working hours, providing location of product

is within normal operating distance from a Vidikron Authorized

Service Center. In some instances it may be necessary for the

product to be returned to the Vidikron factory for repairs. If, solely

in Vidikron’s judgment, location of product to be repaired is beyond

normal operating distance of the closest Vidikron Authorized Service

Center, or the repair requires the unit be returned to the Vidikron

factory, it is the owner’s responsibility to arrange for shipment of

the product for repair. These arrangements must be made through

the selling Vidikron dealer. If this is not possible, contact Vidikron

directly to locate an authorized Vidikron representative who will

assist you in getting a return authorization. Vidikron will return

product transportation prepaid in the United States, unless no

product defect is discovered. In that instance, shipping costs will be

the responsibility of the owner.

RIGHTS, LIMITS AND EXCLUSIONS:

Vidikron limits its obligations under any implied warranties under

state laws to a period not to exceed the warranty period. There are no

express warranties. Vidikron also excludes any obligation on its part

for incidental or consequential damages related to the failure of this

product to function properly. Some states do not allow limitations

on how long an implied warranty lasts, and some states do not allow

the exclusion or limitation of incidental or consequential damages.

So the above limitations or exclusions may not apply to you. This

warranty gives you specific legal rights, and you may also have other

rights that vary from state to state.

EFFECTIVE WARRANTY DATE:

This warranty begins on the effective date of delivery to the end

user. For your convenience, keep the original bill of sale as evidence

of the purchase date.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

ADDITIONAL INFORMATION:

To locate the name and address of the nearest VIDIKRON authorized service location, or for additional information about this Limited

Warranty, please call or write:

VIDIKRON

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph (510) 324-5900

Fax (510) 324-5905

Toll Free 1-888-4-VIDIKRON

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO ATTACH OPTIONS TO THE PLASMA MONITOR

You can attach your optional mounts or stand to the

plasma monitor in one of the following two ways:

1) While it is upright. (See drawing A)

2) As it is laid down with the screen face down (See

drawing B). Lay the protective sheet, which was

wrapped around the plasma monitor when it was

packaged, beneath the screen surface so it does not

scratch the screen face.

* DO NOT touch or hold the screen face when

carrying the unit.

Wall

• This device cannot be installed on its own. Be sure

to use a stand or original mounting unit. (wallmount

unit, stand, etc.)

50mm (2")

Wall

• For correct installation and mounting, it is required

to use a trained, Vidikron Authorized Dealer. Failure

to follow correct mounting procedures could result

in damage to the equipment or injury to the installer.

Product warranty does not cover damage caused by

improper installation.

50mm (2")

Use only the mounting kit or stand provided

by Vidikron. Refer to mounting kit for detailed

instructions.

Ventilation Requirements for enclosure mounting

To allow heat to disperse, leave space between surrounding

objects as shown on the diagram to the right when installing.

Download from Www.Somanuals.com. All Manuals Search And Download.

PART NAMES AND FUNCTIONS

» Front View

POWER

Turns the plasma monitor’s power on and off.

REMOTE SENSOR WINDOW

Receives the signals from the remote control.

POWER

When the power is on it will light GREEN. When the power is on

the standby mode, it will light RED.

Located on bottom

of Plasma

INPUT SELECT / EXIT

Located on bottom

of Plasma

Switches the input, in the following order. The available inputs

depend on the setting of “BNC INPUT”.

VOLUME

DOWN

INPUTSELECT

/EXIT

ENTER

LEFT/-

RIGHT/+

RGB:

VIDEO1 VIDEO2 VIDEO3 HD/COMP/DTV

RGB/PC3 RGB/PC2 RGB/PC1

COMP:

VIDEO1 VIDEO2 VIDEO3 HD1/COMP1/DTV1

RGB/PC2 RGB/PC1 HD2/COMP2/DTV2

LEFT/- and RIGHT/+

Enlarges or reduces the image. Functions as the CURSOR (

buttons in the On-Screen Display (OSD) mode.

)

VOLUME DOWN and UP

Adjusts the volume. Functions as the CURSOR (

the On-Screen Menu mode.

Sets the On-Screen Menu mode and displays the main

menu.

) buttons in

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

» Rear View / Terminal Board

AC IN

RGB1 (mini D-Sub 15pin)

Connect an analog RGB signal from a computer, etc. here.

This input can be used for Input or Output.

Connect the included power cord here.

Connect speakers (not available from Vidikron) here.

Maintain the correct polarity.

RGB3 (DVI 24pin)

Connect a digital signal (TMDS) from a source with a DVI

output.

VIDEO 1,2,3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc here.

VIDEO1 can be used for INPUT or OUTPUT.

EXTERNAL CONTROL

This terminal is used when operating and controlling the

monitor externally by RS-232.

AUDIO1, AUDIO2, AUDIO3

These are audio input terminals. The input is selectable.

Set which video image to distribute them from the audio

menu screen.

DVD1 / HD1

Connect DVD’s, High Deﬁnition or Laser Disks, etc here.

RGB2 / DVD2 / HD2

RGB2: Connect an analog RGB signal and the

synchronization signal.

DVD2 / HD2: Connect DVD’s, High Definition sources,

Laser Discs, etc. here. This input can be set for use with an

RGB or Component source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

Rear View / Terminal Board

RIGHT

LEFT

SPEAKERS MUST

HAVE MORE THAN

7WATT RATING

OHM

IMPEDANCE

AC IN

RIGHT

LEFT

SPEAKERS MUST

HAVE MORE THAN

7WATT RATING

OHM

IMPEDANCE

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

» Remote Control

ON/OFF

RGB 1-2-3

Switches Power ON/OFF. (This does not operate when

POWER/STANDBY indicator of the main unit is off.

Press this button to select RGB/PC as the source. The

available sources depend on the setting of “BNC INPUT”.

RGB:

RGB1 RGB2 RGB3

CURSOR (

)

Use these buttons to select items or settings and to adjust

settings or switch the display patterns.

COMP:

RGB1 RGB3

RGB can also be selected using the INPUT SELECT

button on the monitor.

EXIT

Press this button to exit the OSD controls in the main menu.

Press this button during the display of the sub menu

to return to the previous menu.

ASPECT

Press this button to select between aspect ratios.

MUTE

Press this button to access the OSD controls. Press this

button during the display of the main menu to go to the sub

menu.

Mutes the sound.

10 VOLUME (+/-)

Adjusts the audio volume.

VID 1-2-3

Press this button to select VIDEO as the source.

VID1 VID2 VID3

11 AUTO OFF

Use to select AUTO OFF TIMER settings.

VIDEO can also be selected using the INPUT SELECT

button on the monitor.

COMP 1-2

Press this button to select between Component 1 and

Component 2 inputs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

Remote Control (continued)

12 DISPLAY

Displays the source settings on the screen.

13 LIGHT*

Press this to illuminate the buttons.

* Not available on all models.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

» Battery Installation and Replacement

Insert the 2 “AAA” batteries, making sure to

set them in with the proper polarity.

1. Press and open the cover.

2. Align the batteries according to the (+) and

(–) indication inside the case.

3. Replace the cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names and Functions

» Handling the remote control

» Operating Range

• Do not drop or mishandle the remote control.

• Do not get the remote control wet. If the remote control gets wet,

wipe it dry immediately.

* Use the remote control within a distance of about 23 ft. (7m)

from the front of the monitor’s remote control sensor and at

horizontal an vertical angles of up to approximately 30°

• Avoid heat and humidity.

• When not using the remote control for a long period, remove the

batteries.

• Do not use new and old batteries together, or use different types

together.

* The remote control operation may not function if the monitor’s

remote control sensor is exposed to direct sunlight or strong

artiﬁcial light, or if there is an obstacle between the sensor and

the remote control.

• Do not take apart the batteries, heat them, or throw them into a

ﬁre.

Approx.

23 ft (7m)

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION

VCR or Laser Disc Player

VIDEO 1-3

To video inputs on

the plasma monitor

DVD Player

IBM VGA or Compatibles

Macintosh or Compatibles

(Desktop type)

Monitor adapter for

Macintosh

To Mini D-Sub 15 pin connector on the plasma monitor

HD Set Top Box with DVI

HDCP Output, Computer,

other devices

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

» Connecting Your PC or Macintosh Computer

5. Turn on the plasma monitor and the computer.

Connecting your PC or Macintosh computer to your plasma

monitor will enable you to display your computer’s screen image

for an impressive presentation. The plasma monitor supports the

signals described on page 106.

6. If the plasma monitor goes blank after a period of inactivity, it

may be caused by a screen saver installed on the computer you’ve

connected to the plasma monitor.

To connect a PC, Macintosh or compatible graphics adapter,

simply:

When using a Macintosh with the plasma monitor, the

following four display standards are supported using the

Macintosh adapter:

1. Turn off the power to your plasma monitor and computer.

13” fixed mode

16” fixed mode

2. If your PC does not support SXGA/XGA/SVGA/VGA you

will need to install an SXGA/XGA/SVGA/VGA graphics

board. Consult your computer’s owner’s manual for your SXGA/

XGA/SVGA/VGA conﬁguration. If you need to install a new

board, see the manual that comes with your new graphics board

for installation instructions.

19” fixed mode

21” fixed mode

The 13” fixed mode is recommended for your 42” Wide VGA.

3. This plasma monitor provides signal compatibility up to VESA

1600 x 1200 (UXGA). However, it is not recommended to use

this resolution due to image readability on the monitor’s native

pixel resolution panel.

4. Use the signal cable to connect your PC or Macintosh computer

to the plasma monitor. For Macintosh, use the monitor adapter to

connect to your computer’s video port, if necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

» Connecting Your VCR or Laser Disc Player:

Use common RCA cables (not provided) to connect your VCR

or laser disc player to your plasma monitor. To make these

connections, simply:

» Connecting Your DVD Player:

You can connect your plasma monitor to a DVD player. To do

so, simply:

1. Turn off the power to your plasma monitor and DVD player.

1. Turn off the power to your plasma monitor and VCR or laser

disc player.

2. Use a component video cable to connect your DVD player

to the Y, Cb, and Cr inputs on your plasma monitor. Or use

the DVD-player’s S-Video output. Use a standard S-Video

cable to connect to the S-Video input on the plasma monitor.

2. Connect one end of your RCA cable to the video output

connector on the back of your VCR or laser disc player, connect

the other end to the Video input on your plasma monitor. Use

standard RCA audio patch cords to connect the audio from your

VCR or laser disc player to your plasma monitor (if your VCR or

laser disc player has this capability). Be careful to keep your right

and left channel connections correct for stereo sound.

3. Turn on the plasma monitor and the DVD player.

3. Turn on the plasma monitor and the VCR or laser disc player.

Note: Refer to your VCR or laser disc player owner’s

manual for more information about your equipment’s

video output requirements.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

» Pin Assignment and Signal Levels for 15 pin RGB (analog)

» Pin Conﬁguration and Signal of the RGB 3 Connector (DVI

Connector)

The unit is equipped with a type of connector commonly used for

digital. (This cannot be used for an analog input.)

15 14 13 12 11

RGB 3

Pin No.

Signal (Analog)

Red

10 11 12 13 14 15 16

Green or sync-on-green

Blue

17 18 19 20 21 22 23 24

No connection

Ground

Pin No.

Signal (Digital)

Pin No.

Signal (Digital)

No connection

Red ground

T.M.D.S Data 2 -

T.M.D.S Data 2 +

T.M.D.S Data 2 Shield

No connection

Green ground

+5V Power

Blue ground

Ground

No connection

Sync signal ground

No connection

Bi-directional DATA (SDA)

Horizontal sync or Composite sync

Vertical sync

Hot Plug Detect

T.M.D.S Data 0 -

T.M.D.S Data 0 +

T.M.D.S Data Shield

No connection

DDC Clock

DDC Data

No connection

T.M.D.S Data 1 -

T.M.D.S Data 1 +

T.M.D.S Data 1 Shield

No connection

Data clock

T.M.D.S Clock Shield

T.M.D.S Clock +

T.M.D.S Clock -

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

» POWER

» DISPLAY

To turn the unit ON and OFF:

1. Plug the power cord into an active AC power outlet.

To check the settings:

1. The screen changes each time the DISPLAY button is pressed.

2. If the button is not pressed for approximately three seconds, the

menu turns off.

2. Press the POWER ON button (on the remote control or control

panel) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green)

when the unit is on.

3. Press the POWER OFF button (on the remote control or control

panel) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the

standby mode is set (only when turning off the unit with the

remote control).

» VOLUME

To adjust the sound volume:

1. Press and hold the VOLUME (+) button (on the remote control

or the unit) to increase to the desired level.

2. Press and hold the VOLUME (-) button (on the remote control

or the unit) to decrease to the desired level.

» MUTE

To cancel the sound:

Press the MUTE button on the remote control to cancel the sound;

press again to restore.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

To cancel the off timer:

1. Press the AUTO OFF button twice in a row.

2. The off timer is canceled.

» TIMER OFF

To set the timer off:

The timer off can be set to turn the power off after 30, 60, 90 or

120 minutes

TIMER OFF 30

1. Press the AUTO OFF button to start the timer at 30 minutes.

2. Press the AUTO OFF button to the desired time.

3. The timer starts when the menu turns off.

30 60 90 120 0 ┐

└─────────────────

TIMER OFF 30

NOTE:

After the power is turned off with the timer off...

A slight current is still supplied to the monitor. When you are

leaving the room or do not plan to use the system for a long period

of time, turn off the power of the monitor.

To check the remaining time:

1. Once the off timer has been set, press the AUTO OFF button

once.

2. The remaining time is displayed, then turns off after a few

seconds.

3. When ﬁve minutes remain the remaining time appears until it

reaches zero.

TIMER OFF 30

Download from Www.Somanuals.com. All Manuals Search And Download.

ASPECT RATIO CONTROLS

» Aspect Ratio Operations (Manual)

STD 4:3 mode

There are four aspect ratios available that can be selected for

video signal inputs.

The input signal will be scaled to ﬁt in the center of the 16:9

screen.

When viewing videos or DVDs:

1. Press the ASPECT button on the remote control.

2. Within 3 seconds...

Active

Image

Area

Press the ASPECT button again.

The screen size switches as follows:

LTR BOX STD (4:3)

ANAMPHC

INTELLIWIDE

LTR BOX mode

ANAMPHC mode

The image in the Letterbox mode will be zoomed in, and the top

and bottom portion ‘blanked off.’ This ratio is best suited for

LaserDisc movies or non-anamorphic DVD’s.

The image is compressed vertically, but anamorphic software

will appear properly proportioned.

This is best suited for use with 16:9 DVD’s.

Active Image Area

Download from Www.Somanuals.com. All Manuals Search And Download.

Aspect Ratio Controls

INTELLIWIDE mode

This aspect ratio is designed to ﬁll the 16:9 screen with a 4:3

image. The center of the picture is not stretched, and it gradually

stretches on the sides reaching the most extreme stretch at the far

edges of the picture. (non-linear scaling)

In addition, we apply a very slight vertical stretch uniformly (no

graduation) which results in a very small amount of cropping of

the top and bottom of the image area.

Thus a 4:3 image is transformed into a 16:9 image with minimal

distortion.

Active

Image

Area

Download from Www.Somanuals.com. All Manuals Search And Download.

Aspect Ratio Controls

» Aspect Ratio Operation with Computer Signals

LTR BOX mode

Switch to the wide screen mode to expand the 4:3 image to ﬁll the

entire screen.

1. Press the ASPECT button on the remote control.

2. Within 3 seconds...

Active Image Area

Press the ASPECT button again.

The screen size switches as follows:

When wide signals are input.

STD (4:3)

ANAMPHC LTR BOX

STD 4:3 mode (4:3 or SXGA 5:4)

Information

■ Supported resolution

See page 106 for details on the display output of the

various VESA signal standards supported by the monitor.

■ When 853 (848) dot x 480 line wide VGA *signals

with a vertical frequency of 60 Hz and horizontal

frequency of 31.7 (31.0) kHz are input.

Active

Image

Area

Select an appropriate setting for RGB SELECT mode

referring to the “Table of Signals Supported” on page

106.

* “IBM PC/AT” and “VGA” are registered trademarks of

IBM, Inc. of the United States.

The picture has the same size as the normal computer image.

ANAMPHC mode

NOTE:

Active Image Area

Do not leave the displayed in 4:3 mode for an extended period.

This can cause a phosphor burn-in.

The image is expanded in the horizontal direction.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

» Menu Operations

The OSD window is displayed with respect to the screen as shown

on the diagram.

3. Press the cursor buttons

remote control to highlight the menu

you wish to enter.

on the

PICTURE ADJUST

CONTRAST

1 / 2

BRIGHTNESS

SHARPNESS

COLOR

TINT

IMAGE MEM.

VIDEO NR

FACTORY

OFF

* Depending on the screen’s mode, the OSD may be displayed

differently. In the explanation, the OSD section is shown close

up.

The following describes how to use the menus and the selected

items.

4. Adjust the level or change the setting of the selected item by

using the cursor buttons ◄► on the remote control.

PLASMAVIEW

PICTURE ADJUST

1/2

AUDIO SETUP

1. Press the MENU button on

the remote control to display

the MAIN MENU.

5. Change the adjustments or the settings that are stored in

memory. The change is stored until you change it again.

IMAGE OPTIONS

SETTING

MENU/ENTER

EXIT

SEL.

6. Repeat steps 2-5 to adjust an additional item, or press the EXIT

button on the remote control to return to the main menu.

NOTE:

2. Press the MENU button on the remote control to select a

submenu or item.

The main menu disappears by pressing the EXIT button.

PLASMAVIEW

PREVIOUS PG.

LANGUAGE

2/2

PLASMAVIEW

PICTURE ADJUST

1/2

AUDIO SETUP

IMAGE OPTIONS

SETTING 1

VIDEO STANDARD

SIGNAL INFO.

SETTING 2

SETTING 3

MENU/ENTER

EXIT

SEL.

MENU/ENTER

EXIT

SEL.

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Main Menu

Sub Menu

Functions

Default

Center

Reset

Yes

PICTURE

ADJUST

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

Adjusts the contrast.

Adjusts the brightness.

Adjusts the sharpness

Adjusts the color.

TINT

Adjusts the tint.

Center

CONTRAST

IMAGE MEM.

VIDEO NR

WHITE BAL.

Sets the image memory according to the VIDEO environment and image S/W.

Reduces noise visible in image.

OFF

8500K

Center

OFF

Adjusts the color temperature and white balance.

Adjusts the red content (signal level).

Adjusts the green content (signal level).

Adjusts the blue content (signal level).

Adjusts the red content (black level).

Adjusts the green content (black level).

Adjusts the blue content (black level).

Resets the WHITE BALANCE ADJUST settings to the factory default values.

Adjusts the brightness of midtone areas.

Enables high-quality dark area reproduction.

Adjusts hue and color density of red.

Adjusts hue and color density of green.

Adjusts hue and color density of blue.

Adjusts hue and color density of yellow.

Adjusts hue and color density of magenta.

Adjusts hue and color density of cyan.

Resets COLOR CHART settings to the factory default values.

GAIN RED

WHITE

BALANCE

ADJUST

GAIN GREEN

GAIN BLUE

RED OFFSET

GREEN OFFSET

BLUE OFFSET

RESET

GAMMA CURVE

DITHER

2.2

AUTO

Center

OFF

COLOR CHART

RED

GREEN

BLUE

YELLOW

MAGENTA

CYAN

RESET

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Main Menu

Sub Menu

BASS

Functions

Default

Center

Reset

Yes

AUDIO SETUP

Sets the bass.

TREBLE

Sets the treble.

Yes

BALANCE

AUDIO INPUT 1-3

Sets the left/right balance.

Sets the allocation of the audio connectors.

Yes

Main Menu

Sub Menu

ASPECT RATIO

V SHIFT

Functions

Default

Reset

IMAGE

OPTIONS

Selects between the different aspect ratio modes.

Adjusts the vertical position.

Adjusts the horizontal position.

Adjusts the vertical size.

Center

Min

Yes

H SHIFT

V-SIZE

H-SIZE

Adjusts the horizontal size.

Min

COMPUTER

Turn this on to have the monitor automatically adjust “FINE PICTURE” and

“PICTURE ADJ”

OFF *

FINE PICTURE

Adjusts for ﬂickering on the computer image.

Min *2

Yes

PICTURE ADJUST

Adjusts for striped patterns on the computer image.

Center *2

Main Menu

Sub Menu

OSD

Functions

Defaults

Reset

Yes

DISPLAY OSD

OSD ADJ.

SETTING 1

When set to OFF, the on-screen menu is not displayed.

Sets the position of the menu.

OSD POSITION

OSD ORBITER

Sets the display format as a horizontal or vertical screen.

Sets the OSD not to be displayed at the same position.

Sets the BNC connectors.

OFF

RGB

AUTO

BNC INPUT

D-SUB TYPE

RGB TYPE

Checks the signal being transmitted to RGB1 terminal.

Sets the appropriate mode for the computer image.

Yes

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Main Menu

Sub Menu

Functions

Default

Reset

RGB (VGA signals), VIDEO (Moving picture), WIDE (Wide VGA), DTV.

Sets the digital broadcasting (1080A, 1080B, 1080C) or the High Vision (1035I).

Skips over signals which are not present.

HD TYPE

1080B

OFF

Yes

INPUT SKIP

FACTORY

Resets all the settings (PICTURE ADJUST, AUDIO, IMAGE OPTIONS,

SETTING 1-3, etc.) to the factory default values.

Main Menu

Sub Menu

Functions

Default

OFF

Reset

Yes

SETTING 2

AUTO OFF

Sets the monitor for use as an energy-saving display when used with a computer.

Sets the picture to suit the movie.

CINEMA MODE

PIXL PROTECT LUM. SETTING

ORBITER

Limits screen brightness to reduce burn-in on the display.

Moves the picture intermittently.

AUTO

OFF

INVERSE

Displays a negative/positive inverse image or an all-white screen.

Sweeps the screen with a white vertical bar.

Softens the detail in 4 steps (1-4)

IMAGE SWEEP

SOFTEN

SIDEBAR LEV.

S1/S2

In case of 4:3, sets the luminance of both sides.

Resizes the S-video image to best ﬁt the display.

OFF

Main Menu

Sub Menu

Functions

Defaults

Reset

PRESENT TIME

PROGRAM

SETTING 3

TIMER

Sets the day of the week and the time.

Sets the ON/OFF time for switching on the power and the input mode.

Sets the input mode at the time the power is switched on.

Disables the function of the front panel buttons.

Disables the transmission of the remote control.

When set to ON, the received signal will be looped out.

OFF

LAST

OFF

Yes

INPUT SELECT

CONTROL LOCK

IR ENABLE

LOOP OUT

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Main Menu

Sub Menu

Functions

Default

ALL

OFF

Reset

Yes

ID NUMBER

DIVIDER

Sets ID number for the display.

VIDEO WALL

Creates a 2x2 or 3x3 video wall.

Sets the position.

POSITION

DISP. MODE

AUTO ID

Selects the screen mode from between Splitting and Blanking.

Automatically sets the ID number of multiple displays.

Adjusts the position of the image, etc.

SPLIT

OFF

Yes

IMAGE

ADJUST

P. ON DELAY When set to ON, each display turns on after a delay time.

OFF

Yes

LUM SET

LINK

Sets a uniform brightness for each display.

REPTR

TIMER

Sets two programmable timers.

OFF

Yes

Main Menu

Sub Menu

Functions

Default

English

AUTO

Reset

LANGUAGE

Sets the language of the menus (English, German, French, Italian, Spanish).

VIDEO

STANDARD

Sets the VIDEO format (AUTO, PAL, PAL-M, PAL-N, PAL60, SECAM, 4.43

NTSC or 3.59 NTSC).

SIGNAL INFO.

Used to check the frequency and synchronizing polarities of the active signal

being input.

*1 AUDIO INPUT 1: VIDEO 1 AUDIO INPUT 2: HD/DVD1 AUDIO INPUT 3: RGB1

*2 RGB/PC only

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

» Picture Adjust Menu

* If neither or buttons is pressed within 5 seconds, the current

setting is set and the previous screen reappears.

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be adjusted

as desired.

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Example: Adjusting the contrast

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

NOTE:

If “CAN NOT ADJUST” appears...

When trying to enter the PICTURE submenu, make sure IMAGE

MEM. is not set to FACTORY.

1. Use the

and

buttons to select “PICTURE ADJUST”,

then press the MENU button. The “PICTURE ADJUST” screen

appears.

2. Use the and buttons to select “CONTRAST”.

Information

■ Picture adjustment screen

PICTURE ADJUST

1 / 2

CONTRAST ......... Changes the picture’s white level.

BRIGHTNESS ..... Changes the picture’s black level.

SHARPNESS ....... Changes the picture’s sharpness.

Adjusts picture detail of VIDEO

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

display.

COLOR ................ Changes the color density.

TINT .................... Changes the picture’s tint. Adjust for

natural colored skin, background, etc.

TINT

IMAGE MEM.

VIDEO NR

FACTORY

OFF

■ Adjusting the computer image

Only the contrast and brightness can be adjusted when a

computer signal is connected.

3. Use the and buttons to adjust the contrast.

■ Restoring the factory default settings

Select “FACTORY” under the “IMAGE MEM.” settings.

CONTRAST

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Setting the picture mode according to the brightness of the

room

There are four picture modes that can be used effectively according

to the environment in which you are viewing the display.

3. To set to “FACTORY” ...

Use the and buttons to select “FACTORY”. The mode

switches as follows when the and buttons are pressed:

CONTRAST

LW BLK1

LW BLK2

FACTORY

BOOST

Example: Setting the “FACTORY” mode

IMAGE MEM.

FACTORY

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1. Use the

and

buttons to select “PICTURE ADJUST”,

If neither the

button is pressed within 5 seconds, the

then press the MENU button. The “PICTURE ADJUST” screen

appears.

current selection is set and the previous screen reappears.

4. Once the adjustment is completed...

2. Use the and buttons to select “IMAGE MEM.”

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

PICTURE ADJUST

1 / 2

Information

■ Types of picture modes

LW BLK1, 2

Set this mode when watching video in a dark room. This mode

provides darker, ﬁner pictures, like the screen in movie theaters. For a

darker image, select LW BLK2.

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

TINT

CONTRAST

IMAGE MEM.

VIDEO NR

FACTORY

OFF

Set this mode when watching video in a bright room. This mode

provides dynamic pictures with distinct differences between light and

dark sections.

BOOST

Use this setting to boost brightness.

FACTORY

Use this to reset the picture to the factory default settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

3. Use the and buttons to select “VID NR3”.

Reducing noise in the picture

Use these settings if the picture has noise due to poor reception

or when playing video tapes on which the picture quality is poor.

The mode switches as follows when the

pressed:

and

buttons are

Example: Setting “VID NR-3”

OFF

VID NR-1

VID NR-2

VID NR-3

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

VID NR

VID NR3

1. Use the

and

buttons to select “PICTURE ADJUST”,

then press the MENU button. The “PICTURE ADJUST” screen

appears.

* If neither the or button is pressed within 5 seconds,

the current selection is set and the previous screen reappears.

2. Use the and buttons to select “VIDEO NR”.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

��

�

��

Information:

■ VIDEO NR

* “NR” stands for Noise Reduction.

* This function reduces noise in the picture.

��

�

��

■ Types of noise reduction

��

There are three types of noise reduction. Each has a different

level of noise reduction. The effect becomes stronger as the

number increases (in the order VID NR1

VID NR3).

VID NR2

OFF ....... Turns the noise reduction function off.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Setting the White Balance

Use this procedure to set color tone produced by the plasma dis-

play.

Example: Setting “6500K”

* If neither the or button is pressed within 5 seconds, the

current selection is set and the previous screen reappears.

4. Once the setting is completed...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1. Use the

and

buttons to select “PICTURE ADJUST”,

Information

then press the MENU button. The “PICTURE ADJUST” screen

appears.

■ Setting the color temperature

5400K .................... Redder

6500K .................... Slightly redder

8500K .................... Standard (slightly bluer)

9300K .................... Bluer

2. Use the and buttons to select “WHITE BAL”.

3. Use the and buttons to select “6500K”.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that

this also restores other settings to the factory defaults.

The mode switches as follows when the

pressed:

and

buttons are

5400K 6500K 8500K 9300K

Adjusting the color to the desired level

* See below to set “WHITE BALANCE ADJUST”.

Use this procedure to adjust the white balance for each color

temperature to achieve the desired color quality.

PICTURE ADJUST

2 / 2

Example: Adjusting the “GAIN RED” of “9300K” color

temperature.

PREVIOUS PG.

WHITE BAL

6500K

2.2

Perform the following operations.

GAMMA CURVE

DITHER

AUTO

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

COLOR CHART

EXIT

SEL.

ADJ.

Perform Steps 1-3 of WHITE BAL., then...

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Press the MENU button. The “WHITE BAL.” screen appears.

5. Use the and buttons to select “GAIN RED”.

Information

■ Adjusting the white balance

R/G/B GAIN ......... White balance adjustment for signal level

R/G/B OFFSET ......White balance adjustment for black level

RESET .................... Resets settings to the factory default

WHITE BALANCE ADJUST

values. Use and buttons to select

“ON”, then press the MENU button.

WHITE BAL. 6500K

GAIN RED

■ Restoring the factory default settings

Select “RESET” under the WHITE BAL. menu.

GAIN GREEN

GAIN BLUE

RED OFFSET

GREEN OFFSET

BLUE OFFSET

RESET

Changing the Gamma Curve

This feature adjusts the brightness of the midtone areas while

keeping shadows and highlights unchanged.

Example: Setting “2.8”

OFF

EXIT

SEL.

ADJ.

EXIT

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

6. Adjust the white balance using the and buttons.

GAIN RED

1. Use the ▲ and ▼ buttons to select “PICTURE ADJUST”,

then press the MENU button. The “PICTURE ADJUST” screen

appears.

* If neither the and buttons is pressed within 5 seconds, the

current setting is set and the previous screen reappears.

2. Use the ▲ and ▼ buttons to select “GAMMA CURVE”.

7. Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

3. Use the and buttons to select “2.8”. The mode switches as

follows each time the or button is pressed:

1.8

2.2

2.5

2.8

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Perform the following operations.

PICTURE ADJUST

2 / 2

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

PREVIOUS PG.

WHITE BAL

6500K

2.8

GAMMA CURVE

DITHER

1. Use the

and

buttons to select “PICTURE ADJUST”,

AUTO

then press the MENU button. The “PICTURE ADJUST” screen

appears.

COLOR CHART

EXIT

SEL.

ADJ.

2. Use the and buttons to select “DITHER”.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

3. Use the and buttons to select “AUTO”. The mode switches

as follows each time the or button is pressed:

To delete the main menu, press the EXIT button once more.

AUTO

STILL

MOTION

DIFFUSED

Information

PICTURE ADJUST

2 / 2

■ GAMMA CURVE settings

The picture becomes darker as the number increases (in the

sequence of 1.8, 2.2, 2.5, 2.8).

PREVIOUS PG.

WHITE BAL.

6500K

2.8

GAMMA CURVE

DITHER

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that

this also restores other settings to the factory defaults.

AUTO

COLOR CHART

EXIT

SEL.

ADJ.

EXIT

Making the Dither adjustments

This feature allows more detailed tone to be reproduced especially

in the dark area.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Example: Setting “2.2”

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

2. Use the ▲ and ▼ buttons to select “COLOR CHART”, then

press the MENU button. The “COLOR CHART” screen appears.

Information

■ DITHER settings

AUTO ....................Will automatically appraise the picture

and make adjustments.

STILL ....................Will apply the dither method suitable

for still pictures.

3. Use the ▲ and ▼ buttons to select “BLUE”.

4. Adjust using the ◄ and ► buttons.

MOTION................Will apply the dither method suitable

for motion pictures.

DIFFUSE...............Will apply the error diffusion method.

COLOR CHART

RED

GREEN

BLUE

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that

this also restores other settings to the factory defaults.

YELLOW

MAGENTA

CYAN

Adjusting the colors

RESET

OFF

Use this procedure to adjust hue and color density for red, green,

blue, yellow, magenta and cyan. Such adjustments will not affect

the other colors. You can accentuate the green color of trees, the

blue of the sky, etc.

EXIT

SEL.

ADJ.

EXIT

* If neither the ◄ or ► button is pressed within 5 seconds, the

Example: Adjusting the color tune for blue

current selection is set and the previous screen reappears.

Perform the following operations.

To continue making other adjustments...

Repeat from step 3.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

5. Once the setting is completed...

1. Use the ▲ and ▼ buttons to select “PICTURE ADJUST”,

then press the MENU button. The “PICTURE ADJUST” screen

appears.

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

1. Use the and buttons to select “AUDIO SETUP”, then press

the MENU button. The “AUDIO SETUP” screen appears.

Information

■ COLOR CHART settings

RED ....................... Makes red’s adjustment

GREEN ................. Makes green’s adjustment

BLUE .................... Makes blue’s adjustment

YELLOW .............. Makes yellow’s adjustment

MAGENTA ........... Makes magenta’s adjustment

CYAN .................... Makes cyan’s adjustment

RESET ................... Resets settings to the factory default values. Use

2. To adjust the bass... Use the

“BASS”.

and

buttons to select

3. Adjust the bass using the and buttons.

AUDIO SETUP

BASS

and buttons to select “ON”, then press the MENU button.

TREBLE

BALANCE

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this also

restores other settings to the factory defaults.

AUDIO INPUT1

AUDIO INPUT2

AUDIO INPUT3

VIDEO 2

HD 1

RGB 1

EXIT

SEL.

ADJ.

To continue adjusting the audio ...

Repeat from step 2.

» Audio Setup Menu

Adjusting the treble, bass and left/right balance and audio

input select

Information

■ Audio setup menu

BASS .................... Controls the level of low frequency sound.

TREBLE ............... Controls the level of high frequency sound.

BALANCE ........... Controls the balance of the left and right

channels.

The treble, bass and left/right balance can be adjusted to suit your

tastes.

Example: Adjusting the bass

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Note:

COMP: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ←

If “CAN NOT ADJUST” appears...

→ RGB3 ↔ RGB1 ↔ HD/DVD2 ←

Set “AUDIO INPUT” on the AUDIO SETUP menu correctly.

AUDIO SETUP

BASS

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once again.

TREBLE

BALANCE

AUDIO INPUT1

AUDIO INPUT2

AUDIO INPUT3

VIDEO 2

HD 1

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired input.

Example: Setting “AUDIO INPUT1” to “VIDEO 2”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

RGB 1

EXIT

SEL.

ADJ.

4. Once the adjustment is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

1. Use the and buttons to select “AUDIO SETUP”, then press

the MENU button. The “AUDIO SETUP” screen appears.

2. Use the and buttons to select “AUDIO INPUT1”.

3. To set the AUDIO INPUT1 to “VIDEO2”...

Use the and buttons to select “VIDEO2”.

Information

■ AUDIO INPUT

A single audio input cannot be selected as the audio

channel for more than one input terminal.

The mode switches as follows each time the

and buttons is

pressed:

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the

factory defaults.

The available sources depend on the setting of “BNC INPUT”.

RGB: → VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD1 ←

→ RGB3 ↔ RGB2 ↔ RGB1 ←

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

To select a mode ...

» Image Options Settings Menu

Use the and buttons to select a mode. The mode switches as

follows when the and buttons are pressed:

STD 4:3 ↔ ANAMPHC ↔ I-WIDE ↔ LTR BOX

* The mode can also be switched by pressing the “ASPECT”

button on the remote control.

The position of the image can be adjusted and ﬂickering of the

image can be corrected.

Example: Adjusting the vertical position in the normal mode

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

2. To adjust the vertical position ...

Use the and buttons to select “V SHIFT”.

1. Use the

and

buttons to select “IMAGE OPTIONS”,

IMAGE OPTIONS

then press the MENU button. The “IMAGE OPTIONS” screen

appears.

ASPECT RATIO

V SHIFT

I-WIDE

Default settings (when RGB/PC is selected).

H SHIFT

IMAGE OPTIONS

V - SIZE

ASPECT RATIO

V SHIFT

I-WIDE

H - SIZE

H SHIFT

EXIT

SEL.

ADJ.

V - SIZE

H - SIZE

COMPUTER

FINE PICTURE

PICTURE ADJ.

OFF

3. Adjust using the and buttons.

V SHIFT

EXIT

SEL.

ADJ.

EXIT

* If neither the

or button is pressed within 5 seconds, the

current setting is set and the previous screen reappears.

* The settings on the IMAGE ADJUST menu are not preset at the

factory.

To continue making other computer image adjustments...

Repeat from step 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Once all adjustments are completed...

Press the EXIT button to return to the main menu, To delete the

main menu, press the EXIT button once more.

* If FINE PICTURE will not adjust, set “Computer” to OFF and adjust

manually.

Information

■ When “COMPUTER” is off

IMAGE OPTIONS

■ Adjusting the position of the image

V SHIFT....................Adjusts the vertical position of the image.

ASPECT RATIO

V SHIFT

I-WIDE

H SHIFT....................Adjusts the horizontal position of the image.

H SHIFT

V - SIZE

V-SIZE ......................Adjusts the vertical size of the image.

(Except for I-WIDE mode)

H - SIZE

COMPUTER

FINE PICTURE

PICTURE ADJ.

OFF

H-SIZE.......................Adjusts the horizontal size of the image.

(Except for I-WIDE mode)

FINE PICTURE* .... Adjusts for ﬂickering.

PICTURE ADJ.* ..... Adjusts for striped patterns on the image.

EXIT

SEL.

ADJ.

EXIT

*The Picture ADJ. and Fine Picture features are available only when

the “Computer” is off.

When Auto Picture is off, the Fine Picture and the Picture ADJ. items

area displayed so that you can adjust them.

* The COMPUTER, FINE PICTURE and PICTURE ADJ. are

available only for RGB signals. But, these features are not available

for moving pictures on VIDEO, COMP or RGB.

■ Adjusting the COMPUTER

ON .............. The picture ADJ., Fine Picture and Position adjustments

are made automatically. Not available for digital ZOOM.

■ Restoring the factory defaults settings

Select “FACTORY” under the SETTING 1 menu. Note that this also

restores other settings to the factory defaults for Auto Picture.

OFF ............ The Picture ADJ., Fine Picture and Position adjustments

are made manually.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

5. Once the setting is completed...

Press the EXIT button to return to the SETTING 1 menu.

To return to the main menu, press the EXIT button once more.

» SETTING 1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format (horizontal

or vertical) etc.

Information

■ DISPLAY OSD settings

Example: Turning the DISPLAY OSD off

ON.......... The on-screen menu appears.

OFF ........ The on-screen menu does not appear.

If you press the DISPLAY button on the remote control for more than

3 seconds the main menu will appear and can be set (although it is

not ON).

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1. Use the and buttons to select “SETTING 1”, then press the

MENU button. The “SETTING 1” menu appears.

■ OSD ADJUST settings

Adjusts the position of the menu when it appears on the screen.

The position can be set between 1 to 6.

2. Use the and buttons to select “OSD”, then press the MENU

button. The “OSD” menu appears.

3. Use the and buttons to select “DISPLAY OSD”.

4. To set the DISPLAY OSD to “OFF”...

Use the and buttons to select “OFF”. The mode switches as

follows each time the or button is pressed:

■ OSD ANGLE settings

Sets the display format (landscape “H” or portrait “V”).

SETTING 1

ON ↔ OFF

OSD

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

DISPLAY OSD

OSD ADJ.

OFF

AUTO

1080B

OFF

INPUT SKIP

FACTORY

OFF

OSD ANGLE

OSD ORBITER

MENU/ENTER

EXIT

SEL.

OFF

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

■ OSD ORBITER settings

SETTING 2

PREVIOUS PG.

AUTO OFF

2 / 3

ON.......... The position of the menu will be shifted

by eight dots each time OSD is displayed.

OFF ........ OSD will be displayed at the same position.

OFFf

CINEMA MODE

PIXL PROTECT

GRAY LEVEL

S1 / S2

OFF

■ Restoring the factory defaults settings

Select “FACTORY” under the SETTING 1 menu. Note that this

also restores other settings to the factory defaults for Auto Picture.

OFF

DVI TYPE

Setting the BNC connectors

EXIT

SEL.

ADJ.

Select whether to set the input of the 5 BNC connectors to RGB

and Component.

Example: Set the BNC INPUT mode to “COMP”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

Information

■ BNC INPUT settings

RGB ......... Use the 5BNC terminals for RGB input.

COMP ...... Use the 3BNC terminals for Component input.

1. Use the and buttons to select “SETTING 1”, then press the

MENU button. The “SETTING 1” menu appears.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

2. Use the and buttons to select “BNC INPUT”.

3. To set the BNC INPUT mode to “COMP”...

Use the and buttons to select “COMP”. The mode switches as

follows each time the or button is pressed:

RGB ↔ COMP

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Checking the signal being transmitted to RGB1 terminal

3. To set the RGB select mode to “AUTO”...

Use this to conﬁrm the signal being transmitted to the RGB1

terminal.

Use the and buttons to select “AUTO”. The mode switches as

follows each time the or button is pressed:

It is set to RGB and can not be adjusted.

AUTO

STILL

MOTION

RESIZE1

RESIZE2

DTV

SETTING 1

OSD

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

AUTO

1080B

OFF

AUTO

1080B

OFF

INPUT SKIP

FACTORY

INPUT SKIP

FACTORY

OFF

EXIT

SEL.

ADJ.

SEL.

ADJ.

^EXITEXIT

Setting a computer image to the correct RGB select screen

With the computer image, select the RGB Select mode for a

moving image such as (video) mode, wide mode or digital

broadcast.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

Example: Setting the “RGB TYPE” mode to “AUTO”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

■ RGB TYPE modes

One of these 6 modes must be selected in order to display the

following signals correctly.

AUTO:

Select the suitable mode for the speciﬁcations of input

signals as listed in the table “Computer input signals

supported by this system” on page 106.

1. Use the and buttons to select “SETTING 1”, then press the

MENU button. The “SETTING 1” menu appears.

STILL:

To display VESA standard signals. (Use this mode for

a still image from a computer.)

2. Use the and buttons to select “RGB TYPE”.

continued on next page ...

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

1. Use the and buttons to select “SETTING 1”, then press the

MENU button. The “SETTING 1” menu appears.

MOTION:

The video signal (from a scan converter) will be

converted to RGB signals to make the picture

more easily viewable. (Use this mode for a motion

image from a computer.)

2. Use the and buttons to select “HD TYPE”.

RESIZE1:

RESIZE2:

DTV:

When an 852 dot 480 line signal with a horizontal

frequency of 31.7kHz is input, the image may be

compressed horizontally. To prevent this, set RGB

TYPE to RESIZE1.

3. To set the HD TYPE mode to “1080B”...

Use the and buttons to select “1080B”. The mode switches as

follows each time the or button is pressed:

1080B

1035I

1080A

When an 848 dot 480 line signal with a horizontal

frequency of 31.0 kHz is input, the image may be

compressed horizontally. To prevent this, set RGB

TYPE to RESIZE2.

SETTING 1

OSD

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

Set this mode when watching digital broadcasting

(480P).

AUTO

1080B

OFF

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

INPUT SKIP

FACTORY

OFF

EXIT

SEL.

ADJ.

Setting high deﬁnition images to the suitable screen size

Use this procedure to set whether the number of vertical lines of

the input high deﬁnition image is 1035 or 1080.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Example Setting the “1080B” mode to “1035I”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

OFF

Information

SETTING 1

■ HD TYPE modes

These 3 modes are not displayed with correct image signals

automatically.

OSD

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

AUTO

1080B

OFF

1080B ......... Standard digital broadcasts

1035I ........... Japanese “High Vision” signal format

1080A ......... Special Digital broadcasts (for example: DTC100)

INPUT SKIP

FACTORY

OFF

EXIT

SEL.

ADJ.

Setting the Input Skip

When this is ON, signals which are not present will be skipped

over and only pictures whose signals are being transmitted will

be displayed. This setting is valid only for the INPUT SELECT

button on the unit.

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Example: Set to “OFF”

Information

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

■ INPUT SKIP settings

OFF ........... Regardless of the presence of the signal, scan and

display all signals.

ON.............. If no input signal is present, skip that signal.

* “SETTING NOW” will appear during the input search.

1. Use the and buttons to select “SETTING 1”, then press the

MENU button. The “SETTING 1” menu appears.

2. Use the and buttons to select “INPUT SKIP”.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

3. To set the INPUT SKIP mode to “OFF”...

Use the and buttons to select “OFF”. The mode switches as

follows each time the or button is pressed:

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Resetting to the default values

SETTING 1

OSD

Use these operations to restore all the settings (PICTURE

ADJUST, AUDIO, IMAGE OPTIONS, SETTING 1~3, etc) to

the factory default values.

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

AUTO

1080B

OFF

INPUT SKIP

FACTORY

1. On the MAIN MENU, select “SETTING 1”, then press the

MENU button.

OFF

The “SETTING 1” menu appears.

SEL.

ADJ.

^EXITEXIT

2. Use the and buttons to select “FACTORY”, then press the

FACTORY

SETTING 1

OSD

SETTING NOW

BNC INPUT

D-SUB TYPE

RGB TYPE

HD TYPE

COMP

RGB

AUTO

1080B

OFF

INPUT SKIP

FACTORY

When the “SETTING NOW” screen disappears, then all the

settings are restored to the default values.

OFF

4. Once the setting is completed ...

EXIT

SEL.

ADJ.

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

3. Use the and buttons to select “ON”, then press the MENU

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

» SETTING 2 Menu

Setting the Auto Off for computer images

This energy-saving (Auto Off) function automatically reduces the

monitor’s power consumption if no operation is performed for a

certain amount of time.

Information

■ AUTO OFF function

Example: Turning the Auto Off function on

* The auto off function automatically reduces the monitor’s power

consumption if the computer’s keyboard or mouse is not operated for

a certain amount of time. This function can be used when using the

monitor with a computer.

* If the computer’s power is not turned on or if the computer and

selector tuner are not properly connected, the system is set to the off

state.

Perform the following operations.

Press the MENU button on the remote control to

display the MAIN MENU on the screen, then...

1. Use the and buttons to select “SETTING 2”, then press the

MENU button. The “SETTING 2” menu appears.

* For instructions on using the computer’s Auto Off function, refer to

the computer’s operating instructions.

2. Use the and buttons to select “AUTO OFF”.

■ AUTO OFF settings

ON ........ In this mode the Auto Off function is turned on. OFF ....... In

this mode the Auto Off function is turned off.

3. To turn the Auto Off function on ...

Use the and buttons to select “ON”. The mode switches as

follows each time the or button is pressed:

■ AUTO OFF function and POWER / STANDBY indicator

The POWER/STANDBY indicator indicates the status of the Auto Off

function. See page 51 for indicator status and description.

OFF

SETTING 2

PREVIOUS PG.

AUTO OFF

2 / 3

OFFf

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

CINEMA MODE

PIXL PROTECT

GRAY LEVEL

S1 / S2

OFF

DVI TYPE

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

3. To set the CINEMA MODE to “OFF”...

POWER / STANDBY indicator

Use the and buttons to select “OFF”. The mode switches as

follows each time the or button is pressed:

AUTO

OFF

mode

POWER /

STANDBY operating

indicator

AUTO OFF

Description

Turning the picture

back on

status

OFF

SETTING 2

PREVIOUS PG.

AUTO OFF

2 / 3

Green

Not

activated.

Horizontal and

Picture already on.

vertical synchronizing

signals are present

from the computer.

OFF

CINEMA MODE

PIXL PROTECT

GRAY LEVEL

S1 / S2

Off

Red

Activated.

Horizontal and/or

vertical synchronizing or mouse. The

signals are not sent

from the computer.

Operate the keyboard

picture reappears.

OFF

DVI TYPE

Setting the picture to suit the movie

EXIT

SEL.

ADJ.

The ﬁlm image is automatically discriminated and projected in

an image mode suited to the picture. [NTSC, PAL, PAL60, 480I

(60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz),

1080I (60Hz) only]

Information

■ CINEMA MODE

ON ......... Automatic discrimination of the image and projection

in cinema mode.

OFF ....... Cinema mode does not function.

Example: Setting the “CINEMA MODE” to “OFF”

Perform the following operations.

Press the MENU button on the remote control to

display the MAIN MENU on the screen, then...

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

1. Use the and buttons to select “SETTING 2”, then press the

MENU button. The “SETTING 2” menu appears.

4. Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

2. Use the and buttons to select “CINEMA MODE”.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Dynamic Pixel Protection (PIXL PROTECT)

3. Set the PIXL PROTECT mode using

See page 52 to set LUM. SETTING

See page 53 to set ORBITER.

and buttons.

Reducing burn-in of the screen

The brightness of the screen, the position of the picture, positive/

negative mode and image sweep are adjusted to reduce burn-in of

the screen.

See page 54 to set INVERSE.

See page 56 to set IMAGE SWEEP.

Information

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

1. Use the and buttons to select “SETTING 2”, then press the

MENU button. The “SETTING 2” menu appears.

4. Once the setting is completed...

Press the EXIT button to return to the SETTING 2 screen.

To return to the main menu, press the EXIT button once more.

2. Use the and buttons to select “PIXL PROTECT”, then

press the MENU button. The “PIXL PROTECT” screen appears.

LUM. SETTING (Luminance Setting)

Use this to activate the brightness limiter.

Example: Setting “LUM. SETTING” to “SET. 1”

PIXL PROTECT

Perform Steps 1-2 of PIXL PROTECT, then...

LUM. SETTING

ORBITER

AUTO

OFF

3. Use the and buttons to select “LUM SETTING” (relates

to above)

INVERSE

IMAGE SWEEP

SOFTEN

4. Use the and buttons to select “SET. 1”. The mode switches

as follows each time the or button is pressed:

EXIT

SEL.

ADJ.

AUTO

SET. 1

SET. 2

SET. 3

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Use the and buttons to select “AUTO1”. The mode switches

as follows each time the or button is pressed:

PIXL PROTECT

LUM. SETTING

ORBITER

SET. 1

OFF

OFF AUTO1

AUTO2

MANUAL

INVERSE

PIXL PROTECT

IMAGE SWEEP

SOFTEN

LUM. SETTING

AUTO

AUTO1

OFF

ORBITER

EXIT

SEL.

ADJ.

INVERSE

IMAGE SWEEP

SOFTEN

OFF

Information

■ LUM. SETTING

OFF

EXIT

SEL.

ADJ.

AUTO .................... The brightness of the screen is adjusted

automatically to suit the picture quality.

SET. 1, 2, 3 .... Sets maximum brightness. The brightness

level decreases in the order of SET. 1, 2, 3.

Information

■ ORBITER settings

SET. 3 provides minimum brightness.

OFF ................ Orbiter mode does not function.

AUTO1............ The picture moves around the screen

intermittently, making the picture smaller.

ORBITER

Use this to set the picture shift.

Example: Setting ”ORBITER” to “AUTO1”

AUTO2 ........... The picture moves around the screen

intermittently, making the picture bigger.

Perform Steps 1-2 of PIXL PROTECT, then...

MANUAL ....... Use can adjust the orbiter function

(H-Dot, V-Line and Time) manually.

See the following explanation.

3. Use the and buttons to select “ORBITER”

(relates to above).

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Adjust the ORBITER function manually.

Set the amount of shift and the time between movement.

Information

■ ORBITER FUNCTION settings

H-DOT .......... Moves from 1 to 20 dots in the

horizontal direction.

Example: Setting so that the picture moves 2 dots horizontally

and 3 lines vertically every 3 minutes.

Perform Steps 1-3 of ORBITER, then...

V-LINE.......... Moves from 1 to 20 dots in the

vertical direction.

4. Use the and buttons to select “MANUAL”, then press

the MENU button. The “ORBITER” screen appears.

TIME ............. Interval of 1~5 minutes.

5. Adjust the items using the

switches as follows each time the or button is pressed:

and buttons. The mode

INVERSE

Use this to set the inverse mode or to display a white screen.

Example: Setting “INVERSE” to “WHITE”

• H-DOT

1 DOT

2 DOT

2 LINE

.....

19 DOT

19 LINE

20 DOT

20 LINE

Perform Steps 1-2 of PIXL PROTECT, then...

3. Use the and buttons to select “INVERSE”.

• V-LINE

1 LINE

.....

4. Use the and buttons to select “WHITE”. The mode

switches as follows each time the or button is pressed:

• TIME

OFF

WHITE

1 M

2 M 3 M 4 M 5 M

PIXL PROTECT

ORBITER

LUM. SETTING

ORBITER

AUTO

OFF

H-DOT

2 DOT

4 LINE

3 M

INVERSE

WHITE

OFF

V-LINE

TIME

IMAGE SWEEP

SOFTEN

OFF

EXIT

SEL.

ADJ.

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Setting the time for INVERSE/WHITE

Set a time duration.

Information

Example: Setting to that the INVERSE mode starts in 2 hours

and proceeds for one hour and a half.

■ Setting the time

ACTIVE ............. Set the time duration for “INVERSE/

WHITE”. When the ACTIVE is set to “ON”

the mode will stay on.

Perform Steps 1-3 of INVERSE, then...

4. Use the and buttons to select “ON”, then press the MENU

button. The “INVERSE/WHITE” screen appears.

STANDBY ......... Set the standby time until the “INVERSE/

WHITE” mode starts.

* The “STANDBY” can not be set when the “ACTIVE” is ON.

* The “ACTIVE” and “STANDBY” can be set for up to 12

hours and 45 minutes in units of 3 minutes.

* When ending an ACTIVE function, the monitor will be in

STAND BY.

5. Adjust the time using the

switches as follows each time the or button is pressed:

• ACTIVE

and

buttons. The mode

00H03M

00H06M

......

12H42M

12H45M

[Example]

ACTIVE: 01H30M

STANDBY: 02H00M

• STANDBY

00H03M

00H06M

00H09M

....

12H42M

12H45M

|<---------- 2 H ---------->|<----- 1.5 H ----->|<----------

INVERSE/WHITE Start

STAND BY

INVERSE/WHITE

ACTIVE

01H30M

02H00M

■ To select “ON” for the “ACTIVE”...

STANDBY

Set the hours of the active time to 0H and the minutes to 0M.

“ON” will be displayed.

EXIT

SEL.

ADJ.

6. Once the setting is completed...

Press the EXIT button to return to the PIXL PROTECT screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

IMAGE SWEEP

Setting the time for IMAGE SWEEP

When this is set to ON, a white vertical bar moves repeatedly from

the left and of the screen to the right end at a constant speed.

Set a time duration and the speed.

Example: Setting to that the IMAGE SWEEP mode starts

in 30 minutes and proceeds for one hour and a half.

Example: Setting “IMAGE SWEEP” to “ON”

Perform Steps 1-3 of IMAGE SWEEP, then...

Perform Steps 1-2 of PIXL PROTECT, then...

4. Use the and buttons to select “ON”, then press the

MENU button. The “IMAGE SWEEP” screen appears.

3. Use the and buttons to select “IMAGE SWEEP”.

4. Use the and buttons to select “ON”. The mode switches

as follows each time the or button is pressed:

OFF ON

5. Adjust the time using the

switches as follows each time the or button is pressed:

• ACTIVE

and buttons. The mode

PIXL PROTECT

00H03M

00H06M

......

12H42M

12H45M

LUM. SETTING

ORBITER

AUTO

OFF

• STANDBY

INVERSE

00H03M

00H06M

00H09M ......

12H42M

12H45M

IMAGE SWEEP

SOFTEN

OFF

• SPEED

EXIT

SEL.

ADJ.

Information

■ IMAGE SWEEP

ON ........ The white vertical bar appears. You can set the time by

pressing the MENU button while “ON” is set.

IMAGE SWEEP

ACTIVE

STANDBY

SPEED

01H30M

02H00M

EXIT

SEL.

ADJ.

OFF........ Image sweep mode does not funtion.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

PIXL PROTECT

Information

LUM. SETTING

ORBITER

AUTO

OFF

■ Setting the time

INVERSE

ACTIVE ........ Set the time duration for “IMAGE SWEEP”.

When the ACTIVE is set to “ON” the mode will

stay on.

IMAGE SWEEP

SOFTEN

EXIT

SEL.

ADJ.

STANDBY .... Set the standby time until the “IMAGE SWEEP”

mode starts.

Information

■ SOFTEN settings

SPEED ......... Set the moving speed for the “IMAGE SWEEP”.

The speed decreases as the number increases.

OFF ........ Turns the SOFTEN function off.

1,2,3,4 .....Activates the SOFTEN setting. The higher numbers

create a softer image.

* The “STANDBY” can not be set when the “ACTIVE” is ON.

* The “ACTIVE” and “STANDBY” can be set for up to 12

hours and 45 minutes in units of 3 minutes.

“SHARPNESS” can not be adjusted on the “PICTURE

ADJUST” menu.

6. Once the setting is completed...

Press the EXIT button to return to the IMAGE SWEEP screen.

Setting the Sidebar Lev. for the sides of the screen

Use this procedure to set the Sidebar Lev. for the parts on the

screen on which nothing is displayed when the screen is set to

4:3 size.

SOFTEN

Reduces edges and softens the image.

Example: Setting “SOFTEN” to “2”

3. Use the and buttons to select “SOFTEN”.

Example: Adjusting the “SIDEBAR LEV.”

Perform the following operations.

4. Use the and button to select “2”. The mode switches as

follows each time the or button is pressed:

1. On the MAIN MENU, select “SETTING 2”, then press the

MENU button. The “SETTING 2” menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

2. Use the and buttons to select “SIDEBAR LEV.”.

Setting the screen size for S1/S2 video input

If the S-Video signal contains screen size information, the image

will be automatically adjusted to fit the screen when this S1/S2 is

set to AUTO.

3. To adjust the “SIDEBAR LEV.” ...

Use the and buttons to adjust the SIDEBAR LEV..

This feature is available only when an S-Video signal is input via

the VIDEO3 terminal.

Example: Setting the “S1/S2” to “AUTO”

Perform the following operations.

SETTING 2

PREVIOUS PG.

AUTO OFF

2 / 3

OFF

CINEMA MODE

PIXL PROTECT

SIDEBAR LEV.

S1 / S2

1. On the MAIN MENU, select “SETTING 2”, then press MENU

button. The “SETTING 2” screen appears.

OFF

DVI TYPE

2. Use the and buttons to select “S1/S2”.

EXIT

SEL.

ADJ.

3. Use the and buttons to select “AUTO”. The mode

switches as follows each time the and buttons is pressed:

OFF AUTO

Information

■ SIDEBAR LEV. settings

This adjusts the brightness of the black (the Sidebar Lev.) for the

sides of the screen. The standard is 0 (black). The level can be

adjusted from 0 to 15. The factory setting is 3 (dark gray).

SETTING 2

PREVIOUS PG.

PWR. MGT.

2 / 3

OFF

CINEMA MODE

PIXL PROTECT

SIDE BARS

S1 / S2

OFF

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

AUTO

AUTO SIZE

DVI TYPE

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

3.To set PLUG/PLAY mode to “STB/DVD” ...

Use the and buttons to select “STB/DVD”.

The mode switches as follows each time the and buttons is

pressed:

Information

■ S1/S2 Settings

AUTO........ Adjusts the screen size automatically according to

the S1/S2 video signal.

PLUG/PLAY:

BLACK LEVEL:

PC STB/DVD

LOW HIGH

OFF............ Turns the S1/S2 funtion off.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this

also restores other settings to the factory defaults.

DVI TYPE

PLUG/PLAY

BLACK LEVEL

STB/DVD

HIGH

4. Once the setting is completed...

Press the EXIT button to return to the SETTING 3 screen.

To return to the main menu, press the EXIT button once more.

EXIT

SEL.

ADJ.

Information

Setting the signal and black level for DVI signal

Example: Setting the “PLUG/PLAY” mode on “STB/DVD”

■ PLUG/PLAY Settings

PC............... When connected to the PC signal.

BLACK LEVEL is set to “HIGH” automatically.

STB/DVD.... When connected to a satellite receiver, DVD, etc.

BLACK LEVEL is set to “HIGH” automatically.

Perform the following operations.

1. On the MAIN MENU, select “SETTING 2” , then press the

MENU button. The “SETTING 2” screen appears.

■ BLACK LEVEL settings

LOW ........ When connected to the PC signal.

HIGH ....... When connected to the satellite receiver, DVD, etc.

Change “HIGH” into “OFF” if the black level

apprears gray.

2. Use the and buttons to select “DVI TYPE”, then press the

MENU button. The “DVI TYPE” screen apprears.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

» SETTING 3 Menu

Information

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Using the timer

This function sets the monitor to turn ON/OFF automatically at

a set time.

Perform the following operations.

PRESET TIME

This sets the day of the week and present time.

1. On the MAIN MENU, select “SETTING 3”, then press MENU

button. The “SETTING 2” screen appears.

Example: Setting “WEDNESDAY”, “22:05”

Perform Steps 1-2 of TIMER, then...

2. Use the and buttons to select “TIMER”, then press the

MENU button.

3. Use the and buttons to select “PRESET TIME”, then

press the MENU button. The “PRESET TIME” screen appears.

The “TIMER” screen apprears.

PRESENT TIME

TIMER

RETURN

PRESENT TIME

DAYLIGHT

PROGRAM

OFF

SAVING TIME

OFF

WEDNESDAY

13 : 00 : 00

MENU/ENTER

EXIT

SEL.

EXIT

3. Set the TIMER using the

and buttons.

EXIT

SEL.

ADJ.

See page 60 to set PRESENT TIME.

See page 62 to set PROGRAM.

4. Use the and buttons to select the item, then adjust using

the and buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

PRESENT TIME

RETURN

PRESENT TIME

RETURN

DAYLIGHT

SAVING TIME

OFF

SAVING TIME

OFF

WEDNESDAY

22 : 05 : 00

WEDNESDAY

22 : 05 : 00

SET

SEL.

MENU/ENTER

EXIT

SEL.

ADJ.

The mode switches as follows each time the or buttons is

pressed:

Information

■ PRESET TIME settings

DAYLIGHT SAVING TIME ....

• DAYLIGHT SAVING TIME

OFF

Use to set DAYLIGHT SAVING TIME.

ON: The present time + 1 hour.

OFF: Cancelled

• DAY

SUNDAY

MONDAY

......

.....

FRIDAY

23:58

SATURDAY

DAY ................ Set the day of the week (e.g. Sunday).

HOUR .............. Set the hour in the 24-hour format (range 00 to 23).

MINUTES ........ Set the minutes (range 00 to 59)

• HOUR/MINUTES

00:00

00:01

00:02

23:59

5. Once the setting is completed...

* If you press the EXIT button instead of the MENU button in step

5, the settings can not be mode.

Use the and buttons to select “SET”, then press the MENU

button. The adjustments are stored and return to the TIMER

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

PROGRAM TIMER

This sets the day and time at which the power will be switched

ON/OFF as well as the input mode.

The mode switches as follows each time the ZOOM +/- button is

pressed:

• DATE

SUN

MON

....

SAT

SUN

*MON

....

*SAT

Example: Setting so that the power will be switched on at 8:30

A.M., Monday, displaying RGB2 source, and switched off at

10:30 A.M.

• ON/OFF Hour

....

Perform Steps 1-2 of TIMER, then...

3. Use the and buttons to select “PROGRAM”.

• MINUTE

....

TIMER

PRESENT TIME

• INPUT

PROGRAM

OFF

LAST

VIDEO1

VIDEO2

VIDEO3

HD/DVD1

RGB3

RGB2 RGB1

HD/DVD2

EXIT

SEL.

ADJ.

EXIT

• FUNCTION

ORBITER

INVERSE

WHITE

IMAGE SWEEP

4. Use the and buttons to select “ON”, then press the MENU

button. The “PROGRAM TIMER” screen appears.

6. Once the setting is completed...

Press the EXIT button. The programs are stored, and return to the

TIMER screen.

5. Adjust using the

and buttons and ZOOM +/- button.

PROGRAM TIMER

ON OFF INPUT FUNCTION

MON 08:30 10:30 RGB2 INVERSE

DATE

---

- -:- - - -:- -

---

-----

EXIT

SEL.

ZOOM ADJ.

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Information

• An asterisk “*” in the DATE ﬁeld

An asterisk “*” means “every”. For example, “*FRI” means every

Friday and “*” means everyday.

■ PROGRAM TIMER settings

DATE ......................... Set the day of the week (e.g. Sunday).

• A hyphen “-” in the ON ﬁeld or OFF ﬁeld

If any hyphen remains in the ON ﬁeld of OFF ﬁeld, the FUNCTION

can not be set.

ON (hour, minutes) .... Set the time at which the power will be turned

on in the 24-hour format.

OFF (hour, minutes)... Set the time at which the power will be turned

off in the 24-hour format.

• A hyphen “-” in the FUNCTION ﬁeld

A hyphen “-” means last mode (the mode that was last selected at the

time the power was switched off).

INPUT ....................... Set the input mode that will be displayed

when the timer is on.

Setting the DEFAULT INPUT

This function sets the input mode at the time the power is

switched on.

FUNCTION ........ Set the PIXL PROTECT function.

■ To reset the program

Align the cursor with the DATE ﬁeld that you wish to reset, then press

the CLEAR button.

Example: Setting “VIDEO2”

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then ...

■ To reset the data

Align the cursor with the ﬁeld (ON/OFF/INPUT/FUNCTION) that

you wish to reset, then press the CLEAR button.

■ Special characters in the PROGRAM TIMER screen

1. Use the and buttons to select “SETTING 3”, then press

the MENU button. The “SETTING 3” screen appears.

PROGRAM TIMER

DATE

OFF

INPUT FUNCTION

MON 08:30 10:30 RGB2 INVERSE

---

- -:- - - -:- -

---

-----

2. Use the and buttons to select “DEFAULT INPUT”.

3. To set the DEFAULT INPUT to “VIDEO2”...

Use the and buttons to select “VIDEO2”.

EXIT

SEL.

ZOOM ADJ.

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

The mode switches as follows each time the or buttons is

pressed:

Information

■ INPUT SELECT settings

LAST ................... Last mode (the mode that was last selected at

the time the power was switched off).

The available sources depend on the setting of “BNC INPUT”.

RGB:

→ LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←

VIDEO 1, 2, 3 ...... VIDEO input mode.

RGB 1, 2, 3 .......... RGB input mode.

HD 1, 2 ................. HD/DVD input mode.

COMP: → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←

→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ←

SETTING 3

3 / 3

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

PREVIOUS PG.

TIMER

INPUT SELECT

CONTROL LOCK

IR ENABLE

LOOP OUT

VIDEO2

OFF

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.

OFF

ALL

Example: Setting “ON”

ID NUMBER

VIDEO WALL

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

EXIT

SEL.

ADJ.

1. Use the and buttons to select “SETTING 3”, then press

the MENU button. The “SETTING 3” screen appears.

4. Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

2. Use the and buttons to select “CONTROL LOCK”.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

3. To set the CONTROL LOCK to “ON”...

Use the and buttons to select “ON”, then press the MENU

button.

Enabling/disabling remote control wireless transmission

This function enables/disables remote control wireless

transmission.

The mode switches as follows each time the or button is

pressed: OFF

Example: Setting “OFF”

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

SETTING 3

PREVIOUS PG.

TIMER

INPUT SELECT

3 / 3

LAST

CONTROL LOCK

IR ENABLE

1. Use the and buttons to select “SETTING 3”, then press

the MENU button. The “SETTING 3” screen appears.

LOOP OUT

OFF

ALL

ID NUMBER

VIDEO WALL

2. Use the and buttons to select “IR ENABLE”.

EXIT

SEL.

ADJ.

3. To set the IR ENABLE to “OFF”...

4. Once the setting is completed ...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

Use the and buttons to select “OFF”, then press the MENU

button.

The mode switches as follows each time the or button is

pressed: OFF

Information

SETTING 3

PREVIOUS PG.

3 / 3

■ CONTROL LOCK settings

TIMER

ON ................... Disables the buttons on the front panel.

OFF .................. Enables the buttons on the front panel.

INPUT SELECT

CONTROL LOCK

IR ENABLE

LOOP OUT

LAST

OFF

ALL

* Even when the CONTROL LOCK is set, the POWER switch will

not be locked.

ID NUMBER

VIDEO WALL

* This becomes effective when the on-screen menu goes out.

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Once the setting is completed ...

The mode switches as follows each time the

button is

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

pressed: OFF

SETTING 3

PREVIOUS PG.

TIMER

3 / 3

Information

■ IR ENABLE settings

INPUT SELECT

CONTROL LOCK

IR ENABLE

LAST

ON ........ Enables remote control wireless transmission.

OFF ....... Disables remote control wireless transmission. Set “OFF”

to avoid unwanted control from other remote controls.

OFF

LOOP OUT

ID NUMBER

ALL

VIDEO WALL

■ Restoring the factory default settings

EXIT

SEL.

ADJ.

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

Information

■ LOOP OUT settings

ON ........ The received signal will be looped out via

PC1 terminal or VIDEO1 terminal.

OFF ....... The received signal will not loop out.

* Even if LOOP OUT is ON, signals would

Loop Out Setting

When this feature is set to ON, the received signal will be

looped out.

Example: Setting “ON”

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

not be sent out if POWER is being turned off.

■ To connect to another display...

See page 68.

1. Use the and buttons to select “SETTING 3”, then press

the MENU button. The “SETTING 3” screen appears.

■ If the RGB/PC1 signal is present at the time

the power is switched on...

The RGB/PC1 input will be displayed regardless

of the setting of LOOP OUT.

2. Use the and buttons to select “LOOP OUT”.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that

this also restores other settings to the factory defaults.

3. To set the LOOP OUT to “ON”...

Use the and buttons to select “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

ID Number Setting

* To reset back to ALL

When using more than one of these displays, this function sets ID

numbers so that operation of the remote control does not cause

multiple monitors to operate at the same time.

Press the CLEAR button.

Information

■ ID NUMBER settings

ALL ............. ID NUMBER will not be set.

1 to 256 ........ ID NUMBER will be set.

Example: Setting “2”

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

■ When the ID NUMBER has been set

You can also set ID NUMBER for each remote control to operate the

plasma display individually. To do so, requires special remote control

available only from Vidikron factory Service Department.

1. Use the and buttons to select “SETTING 3”, then press

the MENU button. The “SETTING 3” screen appears.

2. Use the and buttons to select “ID NUMBER”.

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

3. To set the ID NUMBER to “O2”...

Use the and buttons to select “2”.

The mode switches as follows each time the and button is

pressed:

To set the ID number for the remote control (requires special

remote control available only from Vidikron factory Service

Department)

ALL

....

255

256

Example: Setting “2”

SETTING 3

PREVIOUS PG.

TIMER

3 / 3

1. Use the and buttons to select “ID NUMBER”.

INPUT SELECT

CONTROL LOCK

IR ENABLE

LAST

2. To set the ID NUMBER to “2” ...

Use the and buttons to select “2”. The mode switches as

follows each time the and button is pressed:

OFF

LOOP OUT

ID NUMBER

VIDEO WALL

EXIT

SEL.

ADJ.

EXIT

ALL

....

255

256

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

VIDEO WALL

SELECT ID

DIVIDER

POSITION 1:

POSITON

DISP. MODE

AUTO ID

SPLIT

OFF

ID NUMBER

OFF

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

EXIT

ADJ.

EXIT

OFF

* To reset back to ALL

Press the CLEAR button.

EXIT

SEL.

ADJ.

3. Set the VIDEO WALL using

See page 69 to set DIVIDER.

and buttons.

4. Once the setting is completed...

Press the EXIT button to delete the SELECT ID screen.

See page 69 to set POSITION.

See page 70 to set DISP. MODE.

See page 70 to set AUTO ID.

Video Wall Setting

Use this feature to conﬁgure a 2×2 or 3×3 video wall.

See page 71 to set IMAGE ADJUST.

See page 72 to set P. ON DELAY.

See page 73 to set LUM SET LINK.

See page 74 to set REPTR TIME.

Perform the following operations.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

4. Once the setting is completed...

Press the EXIT button to return to the SETTING 3 menu.

1. Use the and buttons to select “SETTING 3”, then press the

MENU button. The “SETTING 3” screen appears.

5. Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

2. Use the and buttons to select “VIDEO WALL”, then press

the MENU button. The “VIDEO WALL” screen appears.

NOTE:

A contingency method of shutting off the electric power should be

used in cases of emergency during video wall setup.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Information

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

■ DIVIDER settings

OFF, 1 ......... 1 Screen (Matrix display function does not work)

4 .................. 4 Screens (2x2 video wall)

9 .................. 9 Screens (3x3 video wall)

* When you select “4” or “9”, set the VIDEO WALL POSITION.

DIVIDER

Set the 2x2 or 3x3 video wall.

Example: Setting “4”

Perform Steps 1-2 of VIDEO WALL, then...

VIDEO WALL POSITION

Set the position of each display.

Example: Setting “4”

3. Use the and buttons to select “DIVIDER”.

Perform Steps 1-2 of VIDEO WALL, then...

4. Use the and buttons to select “4”.

The mode switches as follows each time the or button is

pressed:

3. Use the and buttons to select “POSITION”, then press the

MENU button. The “VIDEO WALL POSITION” screen appears.

OFF

4. Use the and buttons to select “NO. 4”.

The mode switches as follows each time the

pressed:

• 4 Screens

button is

VIDEO WALL

DIVIDER

POSITON

NO. 1

NO. 2

NO. 8

NO. 3

.......

NO. 4

DISP. MODE

AUTO ID

SPLIT

OFF

• 9 Screens

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

NO. 7

NO. 14

NO. 15

OFF

EXIT

SEL.

ADJ.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

VIDEO WALL POSITION

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “DISP. MODE”.

POSITION NO.

4. Use the and buttons to select “BLANK”.

The mode switches as follows each time the

button is

pressed: SPLIT

BLANK

EXIT

SEL.

ADJ.

VIDEO WALL

DIVIDER

POSITON

5. Press the EXIT button to return to the VIDEO WALL screen.

DISP. MODE

AUTO ID

BLANK

OFF

Information

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

OFF

■ VIDEO WALL POSITION settings

1 Screen ..... There is no need to set POSITION.

4 Screens

EXIT

SEL.

ADJ.

NO. 1

NO. 2

Information

NO. 4

NO. 3

■ DISP. MODE SETTINGS

SPLIT .......... Combines enlarged screens and creates multiple

screens.

9 Screens

NO. 7

NO. 8

NO. 9

NO. 10 NO. 11 NO. 12

NO. 13 NO. 14 NO. 15

BLANK ....... Corrects misalignment of combined screen

portions and creates multiple screens.

DISP. MODE

Select the screen mode from between two options

(Splitting, Blanking).

AUTO ID

This feature automatically sets the ID numbers of multiple

displays connected to each other.

Example: Setting “ON”

Example: Setting “BLANK”

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

Set the ID number for the No. 1 display on ID NUMBER menu.

Perform Steps 1-2 of VIDEO WALL, then...

Information

■ AUTO ID settings

ON ...... Enables Audo ID function. In the case shown below, display 1

will be set as ID 1, display 2 as ID 2, etc.

3. Use the and buttons to select “AUTO ID”.

REMOTE

OUT

No. 1 No. 2

No. 4 No. 3

No. 1 No. 2

No. 4 No. 3

4. Use the and buttons to select “ON”, then press the MENU

button.

REMOTE

OUT

REMOTE

The mode switches as follows each time the

pressed: OFF

button is

Display 1

Display 2

REMOTE

OUT

No. 1 No. 2

No. 4 No. 3

No. 1 No. 2

No. 4 No. 3

REMOTE

OUT

REMOTE

AUTO ID

REMOTE

AUTO ID

Display 4

Display 3

OFF ..... Disables Auto ID function.

WIRED CABLE

IMAGE ADJUST

The position of the image can be adjusted and ﬂickering of the image can

be corrected.

CONNECTION TURN

EXIT

ADJ.

EXIT

Example: Adjusting the vertical position.

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “IMAGE ADJUST”, then

press the MENU button. The “IMAGE ADJUST” screen ap-

pears.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

4. Use the and buttons to select “V SHIFT”.

P. ON DELAY (Power on delay)

Use this funciton to activate power-on delay.

Turn on the AUTO ID before the following operations.

Example: Setting “ON”

IMAGE OPTIONS

ASPECT RATIO

V SHIFT

I-WIDE

H SHIFT

Perform Steps 1-2 of VIDEO WALL, then...

V - SIZE

H - SIZE

3. Use the and buttons to select “P. ON DELAY”.

COMPUTER

FINE PICTURE

PICTURE ADJ.

OFF

4. Use the and buttons to select “ON”.

The mode switches as follows each time the or button is

SEL.

ADJ.

^EXITEXIT

pressed: OFF

5. Adjust using the and buttons.

VIDEO WALL

DIVIDER

V SHIFT

POSITON

DISP. MODE

AUTO ID

BLANK

OFF

* If neither the and button is pressed within 5 seconds, the

current setting is set and the previous screen reappears.

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

OFF

6. Once the setting is completed...

Press the EXIT button to return to the VIDEO WALL screen.

EXIT

SEL.

ADJ.

Information

■ IMAGE ADJUST settings

These are the same functions as the

IMAGE ADJUST menu on page xx.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

The mode switches as follows each time the or button is

pressed: OFF

Information

■ P. ON DELAY settings

ON ....... Turns on the main power of each display after a delay time.

VIDEO WALL

DIVIDER

OFF ..... Turns on the main power of all displays at the same time.

POSITON

DISP. MODE

AUTO ID

BLANK

OFF

* Once this function has been set to “ON”, POWER ON/OFF button

on the remote control does not function except for the No. 1 monitor.

By pressing the POWER ON button on the remote control the No.

1 monitor will turn on and the others will be turned on one by one

automatically.

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

OFF

* From the second monitor onward, neither the POWER button on the

unit nor the POWER ON button on the remote control does function.

However, by pressing and holding the POWER ON button for more

than 3 seconds, the monitor will be turned on.

EXIT

SEL.

ADJ.

LUM SET LINK

Use this function to set a uniform brightness for each display.

Turn on the AUTO ID before the following operations.

Example: Setting “ON”

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the and buttons to select “LUM SET LINK”.

4. Use the and buttons to select “ON”, then press the MENU

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

REPEAT TIMER (REPTR)

Information

Use this to set two timers. Each timer can use the

DIVIDER, SOURCE and ACTIVE functions.

Turn on the AUTO ID before the following operations.

■ LUM SET LINK settings

ON ...... Sets a uniform brightness for each screen in a 2x2 video

wall.

Example:

OFF .... Sets the individual screen brightness for each screen in a 2x2

video wall.

TIMER1... VIDEO1 will be displayed for 3 minutes.

TIMER2... RGB1 will be displayed for 6 minutes in a

2×2 video wall.

* Set “OFF” in a 3x3 video wall.

* When this function is set “ON”, connect your plasma displays with

the remote cable (optional) in the order of the position numbers for

the 2x2 video wall. See the drawing below.

Perform Steps 1-2 of VIDEO WALL, then...

* If there are changes in the DIVIDER or POSITION, the LUM SET

LINK will automatically turn OFF.

3. Use the and buttons to select “REPTR TIME”.

REMOTE

OUT

VIDEO WALL

No. 1 No. 2

No. 4 No. 3

No. 1 No. 2

No. 4 No. 3

REMOTE

OUT

DIVIDER

REMOTE

POSITON

DISP. MODE

AUTO ID

BLANK

OFF

Display 1

Display 2

REMOTE

OUT

IMAGE ADJUST

P. ON DELAY

LUM SET LINK

REPTR TIME

No. 1 No. 2

No. 4 No. 3

No. 1 No. 2

No. 4 No. 3

REMOTE

OUT

REMOTE

OFF

REMOTE

Display 4

Display 3

EXIT

SEL.

ADJ.

NOTE:

The remote control can not be operated unless the IR ENABLE is set

to “OFF”.

4. Use the and buttons to select “ON”, then press the

MENU button. The “REPTR TIME” screen appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

5. Adjust using the

The mode switches as follows each time the or button is

and buttons.

Information

pressed:

■ REPTR TIME settings

REPTR TIME

If you set both timers, Timer 1 and Timer 2 run consecutively.

In the case of the Video Wall, timer No. 1 can be used to control all the

displays simultaneously.

1 DIVIDER

SOURCE

ACTIVE

VIDEO1

00H03M

* This becomes effective when the on-screen menu goes out.

2 DIVIDER

SOURCE

ACTIVE

RGB1

00H06M

EXIT

SEL.

ADJ.

• DIVIDER

• SOURCE

The available sources depend on the setting of “BNC INPUT”.

RGB: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ←

→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD/DVD2 ←

• ACTIVE

00H01M

00H02M

00H03M

....

04H14M

04H15M

6. Once the setting is completed...

Press the EXIT button to return to the VIDEO WALL screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

LANGUAGE

■ Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

LANGUAGE

DEUTSCH

MENU/ENTER

EXIT

ADJ.

EXIT

» Language Settings Menu

Setting the language for the menus

The menu display can be set to one of seven languages: English,

German, French, Italian, or Spanish.

3. Once the setting is completed...

Press the MENU button to store the setting and return to the main

menu. To delete the main menu, press the EXIT button.

Example: Setting the menu display to “DEUTSCH”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

Information

■ Language settings

English

1. Use the and buttons to select “LANGUAGE”, then press

the MENU button. The “LANGUAGE” screen appears.

German

French

Spanish

Italian

2. To select “DEUTSCH”...

Use the and buttons to select “DEUTSCH”.

The mode switches as follows each time the and buttons

are pressed:

→ ENGLISH ↔ DEUTSCH ↔ FRANÇAIS ←

→ ITALIANO ↔ ESPAÑOL ←

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

3. Once the setting is completed...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button.

» Video Standard Menu

Setting the video signal format

Use these operations to set the video standards of composite video

signals or Y/C input signals.

Example: Setting the video standard to “3.58 NTSC”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1. Use the

and

buttons to select “VIDEO STANDARD”,

then press the MENU button. The “VIDEO STANDARD” screen

appears.

2. To select “3.58NTSC”...

Use the and buttons to select “3.58NTSC”.

The mode switches as follows when the

pressed:

and

buttons are

→ AUTO ↔ 3.58NTSC ↔ 4.43NTSC ←

→ SECAM ↔ PAL-M ↔ PAL-N ↔ PAL-60 ↔ PAL ←

VIDEO STANDARD

3.58NTSC

EXIT

ADJ.

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD (On Screen Display) Controls

» Signal Info. Menu

Information

■ Video standard formats

Different countries use different formats for video signals. Set to the

video standard used in your current country.

Checking the frequencies, polarities of input signals, and

resolution

Use this function to check the frequencies and polarities of the

signals currently being input from a computer, etc.

AUTO ........... The video standards are automatically identiﬁed and

the format is set accordingly.

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

PAL ............... This is the standard format used mainly in the United

Kingdom and Germany.

1. Use the and buttons to select “SIGNAL INFO.”, then press

the MENU button.

SECAM ........ This is the standard format used mainly in France and

Russia.

2. The “SIGNAL INFO” is displayed.

4.43 NTSC,

PAL60 ........... This format is used for videos in countries using PAL

and SECAM video signals.

SIGNAL INFO.

H. FREQ

V. FREQ

: 48.4 KHz

: 60.0 KHz

3.58 NTSC .... This is the standard format used mainly in the United

States and Japan.

H. POLARITY

V. POLARITY

: NEG.

PAL-M .......... This is the standard format used mainly in Brazil.

PAL-N ........... This is the standard format used mainly in Argentina.

MEMORY

: 24

RESOLUTION

: 1366x768

EXIT

SEL.

ADJ.

3. Once you have checked the frequency ...

Press the EXIT button to return to the main menu. To delete the

main menu, press the EXIT button once more.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL CONTROLS

Application

2) Connector on the external equipment side: Serial port

(RS-232C) connector.

These speciﬁcations cover the communications control of the

plasma monitor by external equipment.

See the specifications of the equipment that is to be connected

for the type of connector and the pin assignment.

Connections

Connections are made as described below.

3) Wiring

Use a crossed (reverse cable).

Plasma Monitor

External Equipment

Wire the cable so that each pair of data lines cross between the

two devices. These data line pairs are RXD (Receive data) and

TXD (Transmit data), DTR (DTE side ready) and DSR (DCE side

ready), and RTS (Ready to send) and CTS (Clear to send).

e.g. Personal Computer

If DTR (4) and DSR (6) are not available, these 2 pins can be

ignored. If RTS (7) and CTS (8) are not available, these 2 pins can

be tied together.

1) Connector on the plasma monitor side: EXTERNAL

CONTROL connector.

Communication Parameters

Type of connector: D-Sub 9-pin male

(1) Communication system

(2) Interface

Asynchronous

RS-232C

9600 bps

8 bits

No. Pin Name

No Connection

CTS (Clear to send)

No Connection

(3) Baud rate

(4) Data length

(5) Parity

RXD (Receive data)

TXD (Transmit data)

DTR (DTE side ready)

GND

Odd

(6) Stop bit

1 bit

(7) Communication code

Hex

DSR (DCE side ready)

RTS (Ready to send)

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

Command 2

Communication Format

Command 2, along with command 1, is a number used to

distinguish each command.

8 bit 8 bit 8 bit 8 bit 8 bit 8 bit

•

8 bit 8 bit

Command 1

Unit ID 1

Unit ID 2

Command 2

Data length

Data

Check Sum (CKS), Error Processing, and ACK

1) The check sum described below and RS-232C odd parity

are used together for a check of the received data. The check

sum is the lower order 8 bits of one frame of sent or received

data comprising the sum total of Command 1, Unit ID 1 and

2, Command 2, Data Length, and Data.

Check sum

Command 1

Check Sum Example

Command 1, along with command 2, is a number used to

distinguish each command. In the case of ACK, when the lower

order 4 bits is FH (as in 3FH and 7FH), this indicates that the

commands and data of the supported equipment have been

received. When the lower order 4 bits is BH (as in 3BH and 7BH),

this indicates that unsupported commands and data have been

received.

DFH

80H

60H

47H

01H

08H

Com-

mand 1

Unit

ID 1

Unit

ID 2

Com-

mand 2

Data

Length

Data

Check

Sum

Total 208H

2) Error Processing

Unit ID 1 and Unit ID 2

* When the communication interval is vacant for more than 4

ms, thereafter a received Command 1 will be recognized. If, at

this time, meaningful data cannot be recognized, that data will

not be recognized (as valid data).

* An ACK will not be returned unless the receive data error, the

check sum error, and the receive data are all taken in.

Unit ID 1 and unit ID 2 are numbers used to identify the

equipment that is to be connected. 60H is used for the plasma

monitor and 80H is used for external control equipment such as a

personal computer.

1) Unit ID 1: Indicates the equipment sending the signal

2) Unit ID 2: Indicates the equipment receiving the signal

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

Command Reference List

CMD1 CMD2

LEN

00H

01H

03H

00H

03H

01H

04H

01H

03H

01H

03H

H-SIZE Gain Data

PHASE Gain Data

CLOCK Gain Data

OSD Select

DFH

1FH

DFH

1FH

7FH

58H

1AH

C6H

C1H

1AH

6BH

C7H

C8H

54H

70H

8CH

8BH

8AH

5BH

5CH

26H

41H

45H

6FH

3FH

17H

03H

01H

02H

01H

02H

03H

04H

00H

02H

01H

00H

Power ON

9FH

4EH

4FH

47H

7FH

3EH

3FH

7FH

0AH

00H

7FH

C0H

7FH

51H

7FH

Power OFF

Input Switch Change

VOLUME Gain Data

AUDIO Mute On

AUDIO Mute Off

CONTRAST Gain Data

BRIGHT Gain Data

SHARPNESS Gain Data

COLOR Gain Data

TINT Gain Data

DFH

9FH

OSD ADJ. Gain Data

AUTO OFF Select

SIDEBAR LEV. Set

CINEMA MODE Set

RGB3 ADJ. Select

PIXL PROTECT Set

INVERSE Set

9FH

DFH

IMAGE SWEEP Set

FACTORY

IMAGE MEM. Select

WHITE BAL. Select

RED Gain Data

AUDIO Set

BNC Select

GREEN Gain Data

BLUE Gain Data

RGB Select

HD Select

VID NR Mode Set

BASS Gain Data

LANGUAGE Select

VIDEO STANDARD Select

FREQUENCY Request

INPUT MODE Request

VIDEO ADJ Request

AUDIO Request

TREBLE Gain Data

BALANCE Gain Data

ASPECT RATIO Select

V SHIFT Gain Data

H SHIFT Gain Data

V-SIZE Gain Data

FAILURE MODE Request

MODEL NAME Request

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

01 POWER ON

03 INPUT SWITCH CHANGE

Function

The external control equipment switches on the power of the plasma monitor.

The external control equipment switches the input of the plasma monitor.

Transmission Data

9FH

80H

60H

4EH

00H

CKS

DFH

80H

60H

47H

01H

DATA00

CKS

DATA00: Input Select

01H: Video1

02H: Video2

03H: Video3

05H: HD (HD1 or DTV or DTV1)

06H: HD2 (DTV2)

ACK

The plasma monitor returns the following ACK when the power is

switched on.

3FH

60H

80H

4EH

00H

CKS

07H: RGB1/PC1

08H: RGB2/PC2

0CH: RGB3/PC3

NOTE: Do not set the Power ON or Power OFF command

continuously.

ACK

The plasma monitor returns the following ACK when the input is

switched.

02 POWER OFF

3FH

60H

80H

47H

00H

CKS

Function

The external control equipment switches off the power of the plasma monitor.

Transmission Data

9FH

80H

60H

4FH

00H

CKS

ACK

The plasma monitor returns the following ACK when the power is

switched on.

3FH

60H

80H

4FH

00H

CKS

NOTE: Do not set the Power ON or Power OFF command

continuously.

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

04 VOLUME GAIN DATA

Function

The external control equipment changes the VOLUME gain data of the plasma monitor.

06 AUDIO MUTE OFF

Function

The external control equipment switches off AUDIO Mute of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

9FH

80H

60H

3FH

00H

CKS

DATA00: USER SOUND Gain Flag

DATA01: VOLUME Gain Flag

DATA02: VOLUME Gain

05H

01H

00H: Step 0

ACK

3FH

60H

80H

0AH: Step 10 (Default)

07 CONTRAST GAIN DATA

2AH: Step 42

ACK

Function

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

The external control equipment changes the CONTRAST gain data of the plasma

monitor.

DATA00: USER SOUND Gain Flag

DATA01: VOLUME Gain Flag

05H

01H

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: CONTRAST Gain Flag

DATA02: CONTRAST Gain

051H

07H

CCH: -52

05 AUDIO MUTE ON

Function

The external control equipment switches on AUDIO Mute of the plasma monitor.

FFH: -01

00H: 0

01H: +01

Transmission Data

9FH

80H

60H

3EH

00H

CKS

ACK

14H: +20

3FH

60H

80H

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: CONTRAST Gain Flag

01H

07H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

08 BRIGHT GAIN DATA

Function

The external control equipment changes the BRIGHT gain data of the plasma monitor.

09 SHARPNESS GAIN DATA

Function

The external control equipment changes the SHARPNESS gain data of the plasma

monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BRIGHT Gain Flag

DATA02: BRIGHT Gain

01H

08H

DATA00: USER PICTURE Gain Flag

DATA01: SHARPNESS Gain Flag

DATA02: SHARPNESS Gain

01H

06H

E0H: -32

FFH: -01

00H: 0

01H: +01

F0H: -16

FFH: -01

00H: 0

01H: +01

20H: +32

10H: +16

ACK

Only when a RGB signal is connected

DATA02 SHARPNESS Gain

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

01H: 1

02H: 2

03H: 3

04H: 4

DATA00: USER PICTURE Gain Flag

DATA01: BRIGHT Gain Flag

01H

08H

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: SHARPNESS Gain Flag

01H

06H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

10 COLOR GAIN DATA

Function

The external control equipment changes the COLOR gain data of the plasma monitor.

11 TINT GAIN DATA

Function

The external control equipment changes the TINT gain data of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: COLOR Gain Flag

DATA02: COLOR Gain

* COLOR Gain is from -22 (EAH) to

+22 (16H) only during video

01H

04H

DATA00: USER PICTURE Gain Flag

DATA01: TINT Gain Flag

DATA02: TINT Gain

01H

05H

E0H: -32

FFH: -01

00H: 0

01H: +01

E0H: -32

FFH: -01

00H: 0

01H: +01

20H: +32

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: TINT Gain Flag

01H

05H

DATA00: USER PICTURE Gain Flag

DATA01: COLOR Gain Flag

01H

04H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

12 IMAGE MEM. SELECT

Function

The external control equipment sets the picture mode of the plasma monitor.

13 WHITE BAL. SELECT

Function

The external control equipment changes the WHITE BAL. of the plasma monitor.

Transmission Data

DFH

80H

60H

0AH

01H

DATA00 CKS

DFH

80H

60H

00H

01H

DATA00 CKS

DATA00: 01H: MEMORY

02H: LW BLK1

DATA00: 00H: 5400K

DATA01: 01H: 6500K

DATA02: 03H: 9300K

03H: CONTRAST

04H: FACTORY

ACK

7FH

60H

80H

00H

01H

DATA00 CKS

7FH

60H

80H

0AH

01H

DATA00 CKS

DATA00: 00H: 5400K

01H: 6500K

DATA00: 01H: MEMORY

02H: LW BLK1

02H: 8500K

03H: 9300K

03H: NORMAL

04H: FACTORY

NOTE: Set so that at the selection of 5400K, 6500K, 8500K

of WHITE BAL. change of the following R/G/B GAIN data

cannot be accepted.

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

14 RED GAIN DATA

15 GREEN GAIN DATA

Function

The external control equipment changes the RED gain data of the plasma monitor.

The external control equipment changes the GREEN gain data of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

04H

DATA00 to DATA03 CKS

DFH

80H

60H

7FH

04H

DATA00 to DATA03 CKS

DATA00: USER PICTURE Gain Flag

DATA01: RED Gain Flag

01H

DATA00: USER PICTURE Gain Flag

DATA01: GREEN Gain Flag

01H

02H

DATA02: RED Gain 1 (Offset)

D8H: -40

DATA02: GREEN Gain 1 (Offset)

D8H: -40

FFH: -1

00H: 0

FFH: -1

00H: 0

IEH: +30

D8H: -40

IEH: +30

D8H: -40

DATA03 RED Gain 2 (Drive)

DATA03 GREEN Gain 2 (Drive)

FFH: -1

00H: 0

FFH: -1

00H: 0

IEH: +30

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: RED Gain Flag

01H

DATA00: USER PICTURE Gain Flag

DATA01: GREEN Gain Flag

01H

02H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

16 BLUE GAIN DATA

17 VID NR MODE SET

Function

The external control equipment changes the BLUE gain data of the plasma monitor.

The external control equipment sets the VID NR (Noise Reduction) mode of the plasma

monitor.

Transmission Data

DFH

80H

60H

7FH

04H

DATA00 to DATA03 CKS

DFH

80H

60H

C0H

01H

DATA00 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BLUE Gain Flag

DATA02: BLUE Gain 1 (Offset)

01H

03H

DATA00: 01H: VID NR OFF

02H: VID NR-1

D8H: -40

FFH: -1

00H: 0

IEH: +30

D8H: -40

03H: VID NR-2

04H: VID NR-3

ACK

7FH

60H

80H

DATA00 CKS

DATA03 BLUE Gain 2 (Drive)

DATA00: 01H: VID NR OFF

02H: VID NR-1

FFH: -1

00H: 0

03H: VID NR-2

04H: VID NR-3

IEH: +30

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BLUE Gain Flag

01H

03H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

18 BASS GAIN DATA

19 TREBLE GAIN DATA

Function

The external control equipment changes the BASS gain data of the plasma monitor.

The external control equipment changes the TREBLE gain data of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BASS Gain Flag

DATA02: BASS Gain

05H

03H

F3H: -13

DATA00: USER PICTURE Gain Flag

DATA01: TREBLE Gain Flag

DATA02: TREBLE Gain

05H

04H

F3H: -13

FFH: -01

00H: 0

01H: +01

FFH: -01

00H: 0

01H: +01

ODH: +13

0DH: +13

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BASS Gain Flag

05H

03H

DATA00: USER PICTURE Gain Flag

DATA01: TREBLE Gain Flag

05H

04H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

20 BALANCE Gain Data

21 ASPECT RATIO SELECT

Function

The external control equipment changes the BALANCE gain data of the plasma monitor.

The external control equipment switches the screen mode of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

51H

01H

DATA00 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BALANCE Gain Flag

DATA02: BALANCE Gain

05H

02H

EAH: -22

DATA00: 02H: I-WIDE

03H: LTR BOX

04H: STD 4:3

05H: ANAMPHC

FFH: -01

00H: 0

01H: +01

ACK

7FH

60H

80H

51H

01H

DATA00 CKS

DATA00: 02H: I-WIDE

03H: LTR BOX

16H: +22

04H: STD 4:3

05H: ANAMPHC

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: BALANCE Gain Flag

05H

02H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

22 V SHIFT GAIN DATA

Function

The external control equipment changes the V SHIFT gain data of the plasma monitor.

23 H SHIFT GAIN DATA

Function

The external control equipment changes the H SHIFT gain data of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: V SHIFT Gain Flag

DATA02: V SHIFT Gain

03H

01H

C0H: -64

DATA00: USER PICTURE Gain Flag

DATA01: H SHIFT Gain Flag

03H

02H

DATA02: H SHIFT Gain

80H: -128

FFH: -01

00H: 0

01H: +01

FFH: -01

00H: 0

01H: +01

40H: +64

7FH: +127

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: V SHIFT Gain Flag

03H

01H

DATA00: USER PICTURE Gain Flag

DATA01: H SHIFT Gain Flag

03H

02H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

24 V-SIZE GAIN DATA

25 H-SIZE GAIN DATA

Function

The external control equipment changes the V-SIZE gain data of the plasma monitor.

The external control equipment changes the H-SIZE gain data of the plasma monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: V-SIZE Gain Flag

DATA02: V-SIZE Gain

03H

07H

00H: 0

DATA00: USER PICTURE Gain Flag

DATA01: H-SIZE Gain Flag

DATA02: H-SIZE Gain

03H

08H

00H: 0

40H: +64

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: V-SIZE Gain Flag

03H

07H

DATA00: USER PICTURE Gain Flag

DATA01: H-SIZE Gain Flag

03H

08H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

26 PHASE GAIN DATA

27 CLOCK GAIN DATA

Function

The external control equipment changes the PHASE gain data (Phase) of the plasma

The external control equipment changes the CLOCK gain data of the plasma monitor.

monitor.

Transmission Data

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DFH

80H

60H

7FH

03H

DATA00 DATA01 DATA02 CKS

DATA00: USER PICTURE Gain Flag

DATA01: CLOCK Gain Flag

DATA02: CLOCK Gain

03H

04H

DATA00: USER PICTURE Gain Flag

DATA01: PHASE Gain Flag

DATA02: PHASE Gain

03H

00H: 0

2CH: +44

C0H: -64

FFH: -01

00H: 0

01H: +01

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

40H: +64

DATA00: USER PICTURE Gain Flag

DATA01: PHASE Gain Flag

03H

ACK

7FH

60H

80H

7FH

02H

DATA00 DATA01 CKS

DATA00: USER PICTURE Gain Flag

DATA01: CLOCK Gain Flag

03H

04H

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

28 OSD SELECT

29 OSD ADJ. GAIN DATA

Function

The external control equipment switches on or off the on-screen display (OSD) of the

The external control equipment sets the position of the OSD menu of the plasma monitor.

plasma monitor.

Transmission Data

DFH

80H

60H

1AH

02H

DATA00 DATA01 CKS

02H

DFH

80H

60H

58H

01H

DATA00 CKS

DATA00: OSD ADJ. Gain Flag

DATA01: 01H: 1

DATA00: 01H: On-Screen display On

02H: On-Screen display Off

│

06H: 6

ACK

7FH

60H

80H

58H

7FH

60H

80H

1AH

01H

DATA00 CKS

02H

DATA00: 01H: On-Screen diaplay On

02H: On-Screen display Off

DATA00: OSD ADJ. Gain Flag

On-Screen display On/Off is equivalent to the OSD menu item under the

FUNCTION menu.

*Operation is as described in the table below.

On-Screen Display (OSD)

Display of items and

adjustments on the menu

Volume display, input display,

and screen display

Operation

When screen When screen When screen When screen

display is ON display is

OFF

display is

OFF

Remote control

operation

Yes

Personal computer

control operation

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

30 AUTO OFF SELECT

32 CINEMA MODE SET

Function

The external control equipment switches on or off the AUTO OFF of the plasma monitor.

The external control equipment switches on or off the CINEMA MODE of the plasma

monitor.

Transmission Data

DFH

80H

60H

1AH

02H

DATA00 DATA01 CKS

03H

DFH

80H

60H

C1H

01H

DATA00 CKS

01H: ON

02H: OFF

DATA00: AUTO OFF Select

DATA01: 01H: ON

02H: OFF

DATA00: CINEMA MODE Set

ACK

7FH

60H

80H

1AH

02H

DATA00 DATA01 CKS

03H

7FH

60H

80H

DATA00 CKS

DATA00: AUTO OFF Select

DATA01: 01H: ON

02H: OFF

DATA00: CINEMA MODE Set

01H: ON

02H: OFF

31 SIDEBAR LEV. SET

Function

The external control equipment sets the SIDEBAR LEV. of the plasma monitor.

Transmission Data

DFH

80H

60H

C6H

01H

DATA00 CKS

00H: 0

DATA00: SIDEBAR LEV.

│

0FH: 15

ACK

7FH

60H

80H

DATA00 CKS

DATA00: SIDEBAR LEV.

00H: 0

│

0FH: 15

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

33 RGB3 ADJ. SELECT

Function

The external control equipment sets the RGB3 ADJUST of the plasma monitor.

34 PIXL PROTECT SET

Function

The external control equipment sets the LUM. SETTING, ORBITER, and INVERSE

(inverse of image brightness) of the plasma monitor.

Transmission Data

DFH

80H

60H

1AH

02H

DATA00 DATA01 CKS

06H

DFH

80H

60H

6BH

03H

DATA00 DATA01 DATA02 CKS

DATA00: RGB3 ADJ. Select

DATA01: 01H: 1

02H: 2

DATA00: LUM SETTING

DATA01: INVERSE

01H: AUTO

02H: SET.

01H: ON

03H: 3

02H: OFF

03H: WHITE

01H: ON

ACK

7FH

60H

80H

1AH

02H

DATA00 DATA01 CKS

06H

DATA02: ORBITER (PICTURE SHIFT)

02H: OFF

DATA00: RGB3 ADJ. Select

DATA01: 01H: 1

02H: 2

ACK

The plasma monitor returns the following ACK when setting the LUM. SETTING,

03H: 3

ORBITER, and INVERSE (inverse of image brightness):

3FH

60H

80H

6BH

00H

CKS

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

35 INVERSE SET

36 IMAGE SWEEP SET

Function

The external control equipment sets the INVERSE (inverse of image brightness) and the

The external control equipment sets the IMAGE SWEEP of the plasma monitor.

WHITE of the plasma monitor.

Transmission Data

DFH

80H

60H

C8H

04H

DATA00 to DATA03 CKS

DFH

80H

60H

C7H

03H

DATA00 DATA01 DATA02 CKS

DATA00: IMAGE SWEEP

00H: No operation

01H: ON

02H: OFF

DATA00: INVERSE/WHITE

00H: No operation

01H: ON (INVERSE)

02H: OFF

DATA01: ACTIVE

00H: ON

01H: 03M (minutes)

02H: 06M (minutes)

03H: WHITE

00H: ON

01H: 03M (minutes)

02H: 06M (minutes)

DATA01: ACTIVE

FFH: 12H (hours) and 45M

(minutes)

FFH: 12H (hours) and 45M

(minutes)

DATA02: STANDBY

01H: 03M (minutes)

02H: 06M (minutes)

DATA02: STANDBY

01H: 03M (minutes)

02H: 06M (minutes)

FFH: 12H (hours) and 45M

(minutes)

01H: 1

FFH: 12H (hours) and 45M

(minutes)

DATA03: SPEED

05H: 5

ACK

3FH

60H

80H

C7H

00H

CKS

ACK

3FH

60H

80H

C8H

00H

CKS

Note: The ACTIVE and the STANDBY can be set in units of 3 minutes.

Example: 03H=9 minutes

Note: The ACTIVE and the STANDBY can be set in units of 3 minutes.

Example: 03H=9 minutes

1EH=1 hour and 30 minutes

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

37 FACTORY

38 AUDIO SELECT SET

Function

The external control equipment resets the user adjustment of the plasma monitor.

The external control equipment sets combinations of audio and video inputs for the

plasma monitor.

Transmission Data

1FH

80H

60H

54H

00H

CKS

DFH

80H

60H

70H

02H

DATA00 DATA01 CKS

ACK

DATA00: AUDIO

01H: AUDIO 1

02H: AUDIO 2

03H: AUDIO 3

01H: Video 1

02H: Video 2

03H: Video 3

3FH

60H

80H

DATA01: VISUAL INPUT

05H: HD (HD1 or DVD or DVD1)

06H: HD2 (DTV2)

07H: RGB 1/PC1

08H: RGB 2/PC2

0CH: RGB 3/PC3

ACK

The plasma monitor returns the following ACK when the input is switched.

3FH

60H

80H

70H

00H

CKS

* The plasma monitor returns “Not Available” when selecting the video input same as the

one set at one of the AUDIO 1 to 3.

Example:

The plasma monitor returns “Not Available” when selecting the VIDEO1 for AUDIO2 or

VIDEO3 after VIDEO1 has been set to AUDIO1.

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

39 BNC SELECT

41 RGB SELECT

Function

The external control equipment sets the BNC SELECT of the plasma monitor.

The external control equipment sets the RGB SELECT of the plasma monitor.

Transmission Data

DFH

80H

60H

8CH

01H

DATA00 CKS

01H: RGB

DFH

80H

60H

8BH

01H

DATA00 CKS

DATA00: BNC SELECT

DATA00: 01H: AUTO

02H: STILL

02H: Component

03H: Video

03H: MOTION

04H: RESIZE1

05H: RESIZE2

06H: DTV

ACK

The plasma monitor returns the following ACK when setting the BNC SELECT:

7FH

60H

80H

8CH

01H

DATA00 CKS

ACK

DATA00: BNC SELECT

01H: RGB

02H: Component

03H: Video

7FH

60H

80H

8BH

01H

DATA00 CKS

DATA00: 01H: AUTO

02H: STILL

03H: MOTION

04H: RESIZE1

05H: RESIZE2

06H: DTV

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

41 HD SELECT

42 LANGUAGE SELECT

Function

The external control equipment sets the HD SELECT of the plasma monitor.

The external control equipment sets the LANGUAGE SELECT of the plasma monitor.

Transmission Data

DFH

80H

60H

8AH

01H

DATA00 CKS

DFH

80H

60H

5BH

01H

DATA00 CKS

DATA00: 01H: 1035I

DATA00: 01H: ENGLISH

02H: GERMAN

02H: 1080A

03H: 1080B

03H: FRENCH

04H: SPANISH

05H: ITALIAN

ACK

7FH

60H

80H

8AH

01H

DATA00 CKS

DATA00: 01H: 1035I

02H: 1080A

ACK

03H: 1080B

7FH

60H

80H

5BH

01H

DATA00 CKS

DATA00: 01H: ENGLISH

02H: GERMAN

03H: FRENCH

04H: SPANISH

05H: ITALIAN

100

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

43 VIDEO STANDARD SELECT

Function

The external control equipment sets the VIDEO STANDARD of the plasma monitor.

44 FREQUENCY REQUEST

Function

The external control equipment inquires the Horizontal frequency, Vertical frequency,

Horizontal sync polarity, Vertical sync polarity, Mode, and Resolution of the plasma

monitor.

Transmission Data

DFH

80H

60H

5CH

01H

DATA00 CKS

Transmission Data

DATA00: 01H: 3.58NTSC

02H: 4.43NTSC

03H: PAL

1FH

80H

60H

26H

00H

0BH

CKS

04H: SECAM

05H: AUTO1

0BH: PAL60

0CH: AUTO2

0DH: PAL-M

ACK

7FH

60H

80H

DATA00 to DATA10

CKS

Horizontal frequency

0EH: PAL-N

DATA00: Integer part

00H: 0 (No signal: 00H)

ACK

FFH: 256

00H: 0 (No signal: 00H)

7FH

60H

80H

5CH

01H

DATA00 CKS

DATA01: One decimal place

DATA00: 01H: 3.58NTSC

02H: 4.43NTSC

03H: PAL

09H: 9

Vertical frequency

DATA02: Integer part

04H: SECAM

05H: AUTO1

0BH: PAL60

0CH: AUTO2

0DH: PAL-M

0EH: PAL-N

00H: 0 (No signal: 00H)

FFH: 256

00H: 0 (No signal: 00H)

DATA03: One decimal place

09H: 9

Horizontal sync polarity

DATA04: 00H: -

01H: Positive

02H: Negative

101

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

ACK continued ...

7FH

60H

80H

26H

0BH

DATA00 to DATA10

CKS

7FH

60H

80H

26H

0BH

DATA00 to DATA10

CKS

Vertical sync polarity

RESOLUTION

DATA05: 00H: -

DATA07: Dots (Low-order byte)

DATA08: Dots (High-order byte)

DATA09: Lines (Low-order byte)

00H: 0 (No signal: 00H)

FFH: 256

00H: 257 (No signal: 00H)

01H: Positive

02H: Negative

MODE

DATA06: 00H:

01H to 80H

FFH

NO signal

RGB signal

00H: 0 (No signal: 00H)

Identiﬁcation number of PC mode

81H:

82H:

83H:

84H:

85H:

86H:

87H:

88H:

89H:

A0H:

A1H:

A2H:

A3H:

A4H:

A5H:

A6H:

Video signal

3.58NTSC

4.43NTSC

PAL

PAL-M

PAL-N

PAL60

SECAM

B/W60

B/W50

480I

480P

576I

576P

720P

1035I

1080I

FFH: 256

00H: 257 (No signal: 00H)

DATA10: Lines (High-order byte)

FFH

45 INPUT MODE REQUEST

Function

HD/DVD/DTV singal

The display returns the current input information by the external control equipment’s

request.

Transmission Data

1FH

80H

60H

41H

00H

01H

CKS

ACK

7FH

60H

80H

DATA00 CKS

DATA00: Input Select

01H: Video1

02H: Video2

03H: Video3

05H: RGB1/PC1

04H: HD (HD1 or DTV or DTV1)

06H: RGB2/PC2

0AH: COMP1

0DH: COMP2

0CH: HD2 (DTV2)

0EH: RGB3/PC3

102

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

ACK continued ...

46 VIDEO ADJ REQUEST

Function

7FH

60H

80H

45H

0CH

DATA00 to DATA11

CKS

The display returns the video adjustments information by the external control equipment’s

request.

DATA03: COLOR Gain

E0H: -32

* COLOR Gain is from -22 (EAH) to

+22 (16H) only during video.

FFH: -01

00H: 0

01H: +01

Transmission Data

1FH

80H

60H

45H

00H

0CH

CKS

20H: +32

ACK

7FH

60H

80H

DATA00 to DATA11

CKS

DATA04: TINT Gain

E0H: -32

FFH: -01

00H: 0

01H: +01

DATA00: RED Gain (Offset)

DATA01: GREEN Gain (Offset)

DATA02: BLUE Gain (Offset)

D8H: -40

FFH: -1

00H: 0

* TINT Gain is from -22 (EAH) to

+22 (16H) only during video.

20H: +32

IEH: +30

DATA05: SHARPNESS Gain

F0H: -16

FFH: -01

00H: 0

01H: +01

D8H: -40

FFH: -1

00H: 0

10H: +16

IEH: +30

DATA06: CONTRAST Gain

CCH: -52

D8H: -40

FFH: -01

00H: 0

01H: +01

FFH: -1

00H: 0

IEH: +30

14H: +20

103

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

ACK continued ...

47 AUTO SELECT REQUEST

Function

7FH

60H

80H

45H

0CH

DATA00 to DATA11

CKS

The external control equipment inquires the current combinations of audio and video

inputs for the plasma monitor.

DATA07: BRIGHT Gain

E0H: -32

FFH: -01

00H: 0

01H: +01

Transmission Data

1FH

80H

60H

6FH

00H

03H

CKS

20H: +32

ACK

7FH

60H

80H

DATA00 DATA01 DATA02 CKS

DATA08: RED Gain (Drive)

DATA09: GREEN Gain (Drive)

DATA10: BLUE Gain (Drive)

DATA11: WHITE BAL.

D8H: -40

FFH: -1

00H: 0

DATA00: AUDIO 1

01H - 0CH: VISUAL INPUT DATA

DATA01: AUDIO 2

01H - 0CH: VISUAL INPUT DATA

DATA02: AUDIO 3

IEH: +30

01H - 0CH: VISUAL INPUT DATA

D8H: -40

FFH: -1

00H: 0

VISUAL INPUT DATA

01H:

02H:

03H:

05H:

06H:

07H:

08H:

0CH:

Video 1

Video 2

Video 3

HD (HD1 or DTV or DTV1)

HD2 (DTV2)

RGB 1 /PC1

RGB 2 /PC2

RGB 3 /PC3

IEH: +30

D8H: -40

FFH: -1

00H: 0

IEH: +30

00H: 5400K

01H: 6500K

02H: 8500K

03H: 9300K

104

Download from Www.Somanuals.com. All Manuals Search And Download.

External Controls

48 FAILURE MODE REQUEST

Function

The external control equipment inquires the detection of failures of the plasma monitor.

49 MODEL NAME REQUEST

Function

The external control equipment inquires the product code of the plasma monitor.

Transmission Data

1FH

80H

60H

3FH

00H

CKS

1FH

80H

60H

17H

00H

CKS

ACK

The plasma monitor returns the following ACK:

7FH

60H

80H

3FH

02H

DATA00 DATA01 CKS

7FH

60H

80H

17H

0CH

DATA00 to DATA11

CKS

DATA00: 1st character of the product code

DATA00: FAILURE MODE 1

DATA01: 2nd character of the product code

Bit 0:

PDP MODULE

0: Abnormal

DATA11: 12th character of the product code

1: Normal

Bit 1:

Bit 2:

1: ﬁxed (backup)

TEMPERATURE

0: Abnormal

NOTE:

Received Data (Hex)

Corresponding Character

1: Normal

00H

01H

Bit 3:

Bit 4:

1: ﬁxed (backup)

TEMPERATURE SENSOR

0: Abnormal

08H

09H

10H

11H

12H

1: Normal

Bit 5:

Bit 6:

Bit 7:

1: ﬁxed (backup)

DATA01: FAILURE MODE 2

1: ﬁxed (backup)

28H

29H

80H

96H

- (Hyphen)

(Blank)

If there are fewer than 12 characters in the product code,

product code would be padded right with blanks.

Download from Www.Somanuals.com. All Manuals Search And Download.

105

TABLE OF SIGNALS SUPPORTED

• When the screen mode is STD 4:3, each signal is converted to a 640 dots x 480 lines signal. (Except for *2, *4)

• When the screen mode is ANAMPHC, each signal is converted to a 853 dots x 480 lines signal. (Except for *3)

Computer input signals supported by this system

Vertical Horizontal

Sync Polarity

Presence

Screen Mode

RGB

Select ^*5

Model

Freq.

(Hz)

Freq.

(kHz)

Dots x Lines

DVI

Memory

Horizontal Vertical Horizontal Vertical

Normal

Full

(16:9)

[ Signal Type ]

(4:3)

640 x 400

640 x 480

70.1

59.9

72.8

75.0

85.0

100.4

120.4

60.0

56.3

60.3

72.2

75.0

85.1

99.8

120.0

60.0

70.1

75.0

85.0

100.6

31.5

37.9

37.5

43.3

51.1

61.3

31.0

31.7

35.2

37.9

48.1

46.9

53.7

63.0

75.7

48.4

56.5

60.0

68.7

80.5

NEG

POS

NEG

POS

NEG

POS

NEG

POS

NEG

POS

NEG

POS

NEG

YES

YES^*2*3

YES^*3

YES

YES^*3

YES

STILL

YES

STILL

WIDE2

WIDE1

STILL

*IBM PC/AT

Compatible

Computers

848 X 480

852 X 480^*1

800 X 600

YES

1024 X 768

STILL

106

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Signals Supported (continued)

Vertical Horizontal

Sync Polarity

Presence

Screen Mode

RGB

Select^*5

Mem-

ory

Model

Freq.

(Hz)

Freq.

(kHz)

Dots x Lines

DVI

Horizontal

Vertical

Horizontal Vertical

Normal

Full

(16:9)

[ Signal Type ]

(4:3)

1152 X 864

1280 X 768

75.0

56.2

59.8

60.0

59.9

60.0

75.0

85.0

100.1

60.0

65.0

70.0

75.0

85.0

66.7

74.6

74.9

75.1

60.0

71.2

72.0

66.0

76.0

76.1

67.5

45.1

48.0

47.7

48.3

64.0

80.0

91.1

108.5

75.0

81.3

87.5

93.8

106.3

35.0

49.7

60.2

68.7

64.6

75.1

78.1

61.8

71.7

81.1

POS

NEG

POS

NEG

POS

YES

STILL

YES

WIDE1

WIDE3

1360 X 765

1360 X 768

1376 X 768

1280 X 1024

WIDE1

WIDE2

YES^*4

YES

YES^*3

YES

YES^*4

YES

YES^*4

STILL

1600 X 1200

640 X 480

832 X 624

Sync on G Sync on G

*Apple

Macintosh^*6

1024 X 768

1152 X 870

1280 X 1024

WIDE1

NEG

YES

Work Station

(EWS4800)

Work Station (HP)

1280 X 1024

1152 X 900

Work Station

(Sun)

C Sync

1280 X 1024

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Signals Supported (continued)

Vertical Horizontal

Sync Polarity

Presence

Screen Mode

RGB

Select^*5

Mem-

ory

Model

Freq.

(Hz)

Freq.

(kHz)

Dots x Lines

DVI

Horizontal

Vertical

Horizontal Vertical

Normal

Full

(16:9)

[ Signal Type ]

(4:3)

1024 X 768

60.0

49.7

63.9

YES

YES^*4

YES

Work Station

(Sun)

1280 X 1024

IDC-3000G

PAL625P

768 X 576

640 X 480

50.0

59.9

31.4

31.5

NEG

YES

YES^*7

NTSC525P

MOTION

*1 Only when using a graphic accelerator board that is capable of displaying 852 x 480.

*2 Display only 400 lines with the screen center of the vertical orientation located at the center.

*3 The picture is displayed in the original resolution. The picture will be compressed for other signals.

*4 Aspect ratio is 5:4. This signal is converted to the following signal: 600 dots x 480 lines).

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB

mode prepared for the input signals listed in the table above.

*6 To connect the monitor to a Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer’s video port.

*7 Other screen modes (LTR BOX and I-WIDE) are available as well.

NOTE:

• While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture

or the ﬁne picture because of errors in synchronization of your computer.

• This monitor has a resolution of 853 dots x 480 lines. It is recommended that the input signal be VGA, wide VGA or equivalent.

• With digital input some signals are not accepted.

• The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

• If you are connecting a composite sync signal, use the HD terminal.

* “IBM PC/AT” and “VGA” are registered trademarks of International Business Machines, Inc. of the United States.

* “Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

If the picture quality is poor or there is some other problems, check the adjustments, operations, etc., before requesting service.

SYMPTOM

CHECKS

REMEDY

Picture is disturbed.

Sound is noisy.

• Is a connected component set directly in front or at the side of the

display?

• Leave some space between the display and the connected

components.

Remote control operates erroneously.

The remote control does not work.

• Are the remote control’s batteries worn out?

• Is IR ENABLE set to ON?

• Replace both batteries with new ones.

• Set IR ENABLE OFF on SETTING 3 menu.

• Has an ID number been set for the main unit?

• Set an ID number with the SELECT ID button, or set the ID

number to ALL.

Monitor’s power does not turn on when • Is the monitor’s power cord plugged into a power outlet?

• Plug the monitor’s power cord into a power outlet.

• Press the power button on the monitor to turn on the power.

• Replace both batteries with new ones.

the remote control’s power button is

pressed.

• Are all the monitor’s indicators off?

• Are the remote control’s batteries worn out?

• Is IR ENABLE set to ON?

• Set IR ENABLE OFF.

• Has an ID number been set for the main unit.

• Set an ID number with the SELECT ID button, or set the ID

number to ALL.

Monitor does not operate when the

remote control’s buttons are pressed.

• Is the remote control pointed at the monitor, or is there an obstacle • Point the remote control at the monitor’s remote control sensor

between the remote control and the monitor?

when pressing buttons, or remove the obstacle.

• Is direct sunlight or strong artiﬁcial light shining on the monitor’s

remote control sensor?

• Eliminate the light by closing curtains, pointing the light in a

different direction, etc.

• Are the remote control’s batteries worn out?

• Replace both batteries with new ones.

• Unplug the remote cable from the monitor.

• Set the Control Lock to OFF.

The front panel buttons of the main unit • The front panel buttons do not function during Control Lock.

do not function.

No sound or picture is produced.

• Is the monitor’s power cord plugged into a power outlet?

• Is the volume set at the minimum?

• Plug the monitor’s power cord into a power outlet.

• Increase the volume.

Picture appears but no sound is

produced.

• Is the mute mode set?

• Are the speakers properly connected?

• Press the remote control’s MUTE button.

• Connect the speakers properly.

• Is AUDIO set correctly?

• Set AUDIO on the AUDIO menu correctly.

Poor picture with VIDEO signal input.

• Improper control setting. Local interference. Cable

interconnections. Input impedance is not correct level.

• Adjust picture control as needed. Try another location for the

monitor. Be sure all connections are secure.

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (continued)

SYMPTOM

CHECKS

REMEDY

Poor picture with RGB signal input.

• Improper control setting. Incorrect 15 PIN connector pin

connections.

• Adjust picture controls as needed. Check pin assignments and

connections.

Tint is poor or colors are weak.

Nothing appears on screen.

• Are the tint and colors properly adjusted?

• Is the computer’s power turned on?

• Is a source connected?

• Adjust the tint and color (under PICTURE).

• Turn on the computer’s power.

• Connect source to the monitor.

• Is the Auto Off function in the standby or off mode?

• Is LOOP OUT set to ON?

• Operate the computer (move the mouse, etc.)

• Set LOOP OUT OFF.

Part of picture is cut off or picture is not • Is the position adjustment appropriate?

centered.

• Adjust the IMAGE OPTIONS properly.

Image is too large or too small.

• Is the screen size adjustment appropriate?

• Press the ASPECT button on the remote control and adjust

properly.

Picture is unstable.

• Is the computer’s resolution setting appropriate?

• Set to the proper resolution.

• Check the input signal.

POWER/STANDBY indicator is lighted

in red.

• Horizontal and / or vertical sync signal is not present when the

Auto Off control is on.

POWER/STANDBY indicator is blinking • The temperature inside the main unit has become too high and has • Promptly switch off the power of the main unit and wait until the

in red.

activated the monitor.

internal temperature drops. See *1.

POWER/STANDBY indicator is blinking

in green and red, or green.

• Promptly switch off the power of the main unit. See *2.

----------

*1 Overheat Protector

If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn off the power to the

monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location and wait for

the monitor to cool for 60 minutes. If the problem persists, contact your Vidikron Authorized Dealer.

*2 In the following case, power off the monitor immediately and contact your Vidikron Authorized Dealer or Vidikron Authorized Service Center. The

monitor turns off 5 seconds after powering on and then the POWER/STANDBY indicator blinks. It indicates that the power supply circuit, plasma

display panel or temperature sensor have been damaged.

110

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

VP-42

VP-42HD

VP-50

VP-60

853 x 480

1024 x 768

1365 x 768

Native Resolution:

Screen Aspect Ratio/

Screen Size (Diagonal):

16:9 / 42 in.

16:9 / 50 in.

16:9 / 60 in.

4:3, Letterbox, 16:9

Anamorphic, IntelliWide

4:3, Letterbox, 16:9

Anamorphic, IntelliWide

4:3, Letterbox, 16:9

Anamorphic, IntelliWide

4:3, Letterbox, 16:9

Anamorphic, IntelliWide

Aspect Ratio:

36 1/3 in. (920 mm) W

20 3/8 in. (518 mm) H

36 1/3 in. (920 mm) W

20 3/8 in. (518 mm) H

43 1/3 in. (1106 mm) W

24 1/2 in. (622.30 mm) H

53 1/8 in. (1351 mm) W

29 7/8 in. (760 mm) H

Image Area W x H:

480p, 720p, 1080i

DTV Compatibility:

Power Requirements:

Inputs:

120V AC, 50/60 Hz, 350W

120V AC, 50/60 Hz, 360W

120V AC, 50/60 Hz, 480W

120V AC, 50/60 Hz, 540W

(2) Composite Video (1-BNC,

1-RCA), (2) Component Video 1-RCA), (2) Component Video 1-RCA), (2) Component Video 1-RCA), (2) Component Video

(1-BNC, 1-RCA), (1) S-Video,

(1) RGB (15-pin mini D-Sub),

(1) RGB via BNC, (1) DVI w/

HDCP, (1) RS-232, (3) Stereo

RCA jacks

(1-BNC, 1-RCA), (1) S-Video,

(1) RGB (15-pin mini D-Sub),

(1) RGB via BNC, (1) DVI w/

HDCP, (1) RS-232, (3) Stereo

RCA jacks

(1-BNC, 1-RCA), (1) S-Video,

(1) RGB (15-pin mini D-Sub),

(1) RGB via BNC, (1) DVI w/

HDCP, (1) RS-232, (3) Stereo

RCA jacks

(1-BNC, 1-RCA), (1) S-Video,

(1) RGB (15-pin mini D-Sub),

(1) RGB via BNC, (1) DVI w/

HDCP, (1) RS-232, (3) Stereo

RCA jacks

32˚-95˚F, (0˚-35˚C), 20-80%

humidity (non-condensing)

32˚-95˚F, (0˚-35˚C), 20-80%

humidity (non-condensing)

32˚-95˚F, (0˚-35˚C), 20-80%

humidity (non-condensing)

32˚-95˚F, (0˚-35˚C), 20-80%

humidity (non-condensing)

Operating Environment:

Dimensions:

Width: 40 1/3 in. (1023 mm)

Depth: 4 9/10 in. (124.43 mm) Depth: 4 9/10 in. (124.43 mm) Depth: 3 15/16 in. (100 mm)

Height: 24 1/4 in. (615.18 mm) Height: 24 1/4 in. (615.18 mm) Height: 29 1/4 in. (744 mm)

Width: 40 1/3 in. (1023 mm)

Width: 48 7/16 in. (1230 mm)

Width: 58 1/8 in. (1476 mm)

Depth: 4 7/8 in. (123.3 mm)

Height: 34 15/16 in. (886.4 mm)

Weight: 147 lbs. (66.8 kg)

Weight: 72.8 lbs. (33 kg)

Weight: 98 lbs. (45 kg)

111

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations (continued)

VP-42

VP-42HD

VP-50

VP-60

FCC, CE, C-Tick

Regulatory Approvals:

Limited Warranty:

(1) One year parts and labor

from the date of delivery to the from the date of delivery to the from the date of delivery to the from the date of delivery to the

end user. end user. end user. end user.

All speciﬁcations subject to change without notice. Optional wall mont or table stand available.

PlasmaView, Intelliwide and Dynamic Pixel Protection are trademarks of Vidikron.

112

Download from Www.Somanuals.com. All Manuals Search And Download.

DIMENSIONS

4.899

VP-42 / VP-42HD

1.474

24.220

42" diagonal

1.665

40.301

113

Download from Www.Somanuals.com. All Manuals Search And Download.

Dimensions

3.941

1.667

VP-50

29.286

50" diagonal

2.172

48.407

114

Download from Www.Somanuals.com. All Manuals Search And Download.

Dimensions

4.855

1.903

VP-60

34.912

60" diagonal

2.227

58.117

115

Download from Www.Somanuals.com. All Manuals Search And Download.

RUMA-010550

4-04 v2.0

VIDIKRON

2900 Faber Street

Union City, CA 94587

Ph (510) 324-5900 / Fax (510) 324-5905

1-888-4-VIDIKRON

Download from Www.Somanuals.com. All Manuals Search And Download.

TDK Network Card DEA Series DEA162450BT 1260B2 User Manual
Timex Clock Radio t156 User Manual
TOA Electronics Security Camera C CC764 User Manual
Toastmaster Coffeemaker WST4018ZE User Manual
Toshiba CRT Television 20A42 User Manual
Toshiba Recording Equipment IPR16 X User Manual
Toshiba Satellite TV System P800 User Manual
Tote Vision Computer Monitor LCD 703HDA User Manual
Tribest Juicer FS 610 User Manual
Uniden Welder 24 148 User Manual