Aurora,Ohio 44202
Fax: 330-562-1999
VIDEO
PRODUCTS
INCORPORATED
1275 Danner Drive
Tel: 330-562-2622
VPI
Weatherproof Cable Shield Assembly Procedure
For Outdoor CAT5/5e/6/6a Shielded Cable Installations
The Weatherproof Cable Shield is a water-tight cable restraint to be applied to
shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.
To make sure the connection is waterproof upon completion, follow the steps below.
1. Insert the seal ring into the housing.
2. Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the
sealing nut, screw nut, and housing. (Note: Heat shrink tubing can be applied to cable to increase the O.D. to
6mm-7mm.)
housing
screw nut
sealing nut
CATx cable
strip approx. ½”
Note: CATx cable
used must be
shielded cable.
3. Terminate the CATx shielded cable with an RJ45 connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
|