Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to alert
theusertothepresenceofuninsulated"dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to cause an electric
shock.
Theexclamationpointwithintheequilateraltriangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in this owner manual.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION
ÿ þ ý ü ü û ú û þ ý ü ù ø û÷ ø ö õ ô ÿ ó
INVISIBLE LASER RADIATION WHEN
OPENANDINTERLOCKSDEFEATED.
AVOID EXPOSURE TO BEAM
ý ÷ ÷ ý ø ù ꢀþ û ꢀûþ ý ü ù ø ûõ ù ûÿ þ ý ü ü ù û ú
÷ ø ö õ ô ÿ ó ö ûþ ý ü ù ø û õ ù û ÿ þ ý ü ù û ú
÷ ø ö õ ô ó ö ûþ ý ü ù ø ûÿ þ ý ü ü ù û ú
This product contains a
low power laser device.
The symbol for Class II
(Doublelnsulation)
On Placement
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing
it on carpeting.
On Safety
• When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage
it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours
before turning the power on, or gradually heat the room up and dry the unit before use.
WARNING:
• Should any trouble occur, disconnect the AC power cord and refer servicing to a qualified technician.
• Do not place anything directly on the top of the unit. Damage to the unit can result.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, rent copyrighted material without
permission.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098 and 4,907,093 licensed for limited viewing
uses only.
DVD video discs are copy protected, and any recordings made from these discs will be distorted. This product
incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited
viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly
is prohibited.
E - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart or stand that is
recommended by the manufacturer.
6A. An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does not interfere with
its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-in installation, such as a book case
or cabinet, that may impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the type described in
the operating instructions or as marked on the appliance.
11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means
of an appliance are not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. Cleaning - The appliance should be cleaned only
as recommended by the manufacturer.
14. Power Lines - An outdoor antenna should be
located away from power lines.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
16. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left
unused for a long period of time.
17. Object and Liquid Entry - Care should be taken so that objects do not fall, and liquids are not spilled,
into the enclosure through openings.
18. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled, into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
19. Servicing - The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
E - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Instruction ..................... 1-2
Disc Formats ................................................ 4
Before You Start ........................................... 5
Usingtheremotecontrol..........................................5
Parts and Functions .................................. 6-8
RemoteControl......................................................6-7
FrontandTopPanel...................................................8
Display ......................................................... 9
FrontPanelDisplay....................................................9
DisplayInformation...................................................9
Repeat Playback ........................................ 24
Repeatingatitle/chapter(DVD)............................24
Repeatingasingletrack/wholedisc(CD)...........24
Repeatingaspecificsection(DVD)......................24
Playing MP3 and Picture File Disc......... 25-26
PlayingaMP3filedisc............................................25
PlayingaPicturefiledisc.......................................26
PlayingaMP3/Picturefiledisc...............................26
CustomizingtheFunctionSettings ........27-34
LANGUAGEsetting..................................................27
VIDEOsetting......................................................27-29
TVShape..............................................................27
VideoOutput.......................................................28
Brightness............................................................29
Edges....................................................................29
AUDIOsetting.....................................................30-32
DigitalOut...........................................................30
L/Rspeaker..........................................................30
Subwoofer............................................................31
SurroundDelay.................................................31
CenterDelay.......................................................32
Pinknoise...........................................................32
RATINGsetting...................................................33-34
Password/Parentallock ....................................33
FactorySet..........................................................34
Setup ..................................................... 10-14
Forbetterreception................................................10
ConnectingyourTV...........................................10-11
ConnectingaVCR....................................................12
Connectinganothersource..................................12
Connectingthespeakers&subwoofer ................13
Positioningthespeakersandsubwoofer.............13
Mountingrearsurroundspeakers ..........................14
TurningontheUnitandTV ....................................14
Powercordconnection...........................................14
Adjusting the Sound ............................. 15-16
Playing a Disc ....................................... 17-19
PlayingDisc.............................................................17
Pausingplayback(stillmode)...............................17
Stoppingplayback.................................................17
Toskiptoadifferenttrack......................................17
Radio Operation ......................................... 35
LanguageCodeListforDiscLanguage.......36
FastFoward/FastReverse.....................................18
Slow-motionplay...................................................18
Skip(Forward/Reverse)..........................................18
Zoomingintoanimage .........................................18
Angleselection.......................................................19
Audioselection.......................................................19
Subtitleselection....................................................19
Special Functions ................................. 20-22
Displayfunction(DVD)..........................................20
Locatingaspecifictitle .........................................21
Locatingaspecifictitle/chapter/track..................21
Locatingaspecifictime.........................................22
Anglesetting...........................................................22
Audiosetting..........................................................22
Subtitlesetting.......................................................22
CD / DVD programmable memory ............... 23
DVDprogrammablememory.................................23
Title/Chapterprogrammedplayback.............23
CDprogrammablememory...................................23
Trackprogrammedplayback..........................23
Maintenance ................................................ 37
CleaningDisc..........................................................37
CleaningtheUnit...................................................37
ImportantNote.......................................................37
Trouble Shooting Guide ........................ 37-38
E - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Formats
The unit can playback discs bearing any of the following marks:
DVDs
[8cm (3") / 12cm (5”) disc]
Compatible
Audio CDs
[8cm (3") 12cm (5”) disc]
Region Management Information
Region Management Information: This unit is designed and manufactured to respond to the Region Management
Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond
to the Region number of this unit, this unit cannot play that disc.
ÿ
The region number of this unit is 1.
Disc Function or Operation that is Not Available
When the
symbol appears on the TV screen, it indicates that the function or operation attempted is not
available at that time. This occurs because the DVD disc manufacturer determines the specific functions.
Certain functions may not be available on some discs. Be sure to read the documentation provided with the
disc.
Icons Used on DVDs
Sample lcons
1. English
2. French
2
Language selections for audio
1. English
2. French
2
Language selections for subtitles
Screen aspect ratio
2
Multiple camera angles
Region code indicator
Notes:
• This unit supports 2-channel (L/R) audio and 5.1ch (Multi-channel) MPEG Audio 1/2 (only when the DIGITAL
AUDIO OUT coaxial jack is used for connection). It does not support 7.1 channel MPEG Audio Version 2.0.
• When playing back a CD-G (Graphics) or CD EXTRA disc, the audio portion will be played, but the graphic
images will not be shown.
Title, Chapter and Tracks
ÿ
• DVDs are divided into “titles” and “chapters”. If the
disc has more than one movie on it, each movie would
be a separate “title”. “Chapters” are sections of titles.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
• Audio CDs are divided into “tracks”. A “track” is
usually one song on an Audio CD.
ÿýþúùüû
ÿýþúùüꢀ
ÿýþúùüꢀ
ÿýþúùüꢀ
ÿýþúùüꢀ
Note :
• Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them,
but some do not.
Notes on Unauthorized Discs
You may not be able to play back some DVD discs on this unit if they were purchased from outside your
geographic area or made for business purposes.
E - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Using the Remote Control
• Point the Remote Control at the REMOTE SENSOR located on the Unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
To install Batteries
1.Open the battery door.
2.Insert two "AAA" or IECR03 [1.5V] size batteries.
Battery Replacement
When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will
need to replace the batteries.
Notes:
• If the Remote Control is not going to be used for a long time, remove the batteries to avoid damage caused
by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
E - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Functions
Remote Control
1) FUNCTIONbutton
Display the FUNCTION screen where you can check or
ÿþýüûúùø÷ü
ꢀüꢀþ÷ꢀ ü
change various setting.
1
2)
3)
PREV button
2
Move reverse through titles, chapters or tracks on a disc.
Tune to the presetted stations.
ꢀ
þꢀüꢀüꢀ
üꢀþ
3
/
TUNING buttons
: Fast reverse playback.
: Fast forward playback.
4
ꢀ÷÷øꢀþꢀ÷ûꢀ
ýꢀù
ꢀþꢀü
ûꢀÿýꢀ ù
ýꢀûꢀ÷
ꢀýꢀÿꢀ
5
ꢀ÷ùꢀ
ÿþ÷ꢀ
TUNING
: Scan all available radio stations.
6
4) DISPLAYbutton
Change disc status information displayed on the TV.
5) RETURN button
ReturntothenormaloperationafterusingtheSETUPmenu.
6) MEMORYbutton
ÿꢀþꢀ
ꢀüꢀ
7
8
9
ÿþýÿü
10
11
12
13
Enter the number of a selected chapter or track.
Enter the number of a selected station.
STOP button
Stop playback.
÷ꢀüø÷ꢀ ÿꢀ
ÿ÷ꢀ ꢀ
ꢀøꢀ
ꢀ÷ꢀ
ꢀ÷ꢀ
7)
ÿꢀꢀ ýꢀ üøꢀúÿ
ÿ÷ꢀüû
8) SETUPbutton
14
ꢀ÷þ÷
Open and close the unit's SETUP menu screen.
9)
/
CURSOR buttons
Use to highlight selections on a menu screen and make
adjust certain settings.
10) ENTER button
15
Confirm selections on a menu screen.
ýüꢀ ÿꢀúþþꢀ ꢀ ꢀ÷ûꢀ
úýüû
ýꢀú
11) SLOW
button
16
17
Perform slow forward playback of DVDs.
ûꢀÿꢀ
ꢀýþ
12) OPEN / CLOSE button
Use to open or close the disc tray.
13) P. SCAN / CVBS button
Changing YUV output to Progressive Scan Video mode or
back to CVBS mode.
14)
PRO LOGIC II button
In AV_IN mode, switches to Dolby Pro Logic mode for VHS
tapes encoded with Dolby Pro Logic.
15) Number (0 - 9) and (+10) buttons
Use when creating programs, and entering a parental level
password. To select numbers over 9, press +10 button and
then the second no. for example, to enter 18, press +10 and
then 8.
16) ANGLE button
Switch the camera angle of the video presentation when
scenes with multiple camera angles are recorded on a DVD.
ÿÿÿÿÿ
17) SUBTITLE button
Select one of the subtitle languages programmed on a DVD.
(Continued on next page)
E - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Functions
Remote Control
18) STANDBY / ON [ I /
] button
ÿþýüûúùø÷ü
ꢀüꢀþ÷ꢀ ü
Turns the Unit on and puts it in standby mode.
19) NEXT
button
18
Move forward through titles, chapters or tracks on a disc.
Tune to the presetted stations.
20) AUDIObutton
Select one of the audio soundtracks programmed on a DVD
or selects the audio output mode on a AUDIO CD.
21) ZOOMbutton
Zoom into an image.
TV MODE button
ꢀ
þꢀüꢀüꢀ
üꢀþ
19
20
21
22
23
ꢀ÷÷øꢀþꢀ÷ûꢀ
ýꢀù
ꢀþꢀü
ûꢀÿýꢀ ù
ýꢀûꢀ÷
ꢀýꢀÿꢀ
ꢀ÷ùꢀ
ÿþ÷ꢀ
ÿꢀþꢀ
ꢀüꢀ
24
25
In stop mode, select whether to output the video signal. TV
shows "AUTO" which means output signal depends on DVD
disc(eitherNTSCorPAL).TVshows"PAL"or"NTSC"which
means output signal fixed to PAL or NTSC.
ÿþýÿü
26
27
22)
23)
PAUSE button
Pause playback, frame advance.
÷ꢀüø÷ꢀ ÿꢀ
ÿ÷ꢀ ꢀ
ꢀøꢀ
ꢀ÷ꢀ
ꢀ÷ꢀ
PLAY button
Start playback.
24) MENU button
ÿꢀꢀ ýꢀ üøꢀúÿ
ÿ÷ꢀüû
28
29
ꢀ÷þ÷
Open and close DVD's menu.
25)
/
CURSOR buttons
Use to highlight selections on a menu screen and adjust
certain settings.
26) 5.1 / 2.1 CH button
Switch speaker output to 5.1 channel mode. (All speakers
+ subwoofer)
Switch speaker outputs to 2.1 channel. (Front left/right
speakers + subwoofer)
ýüꢀ ÿꢀúþþꢀ ꢀ ꢀ÷ûꢀ
úýüû
ýꢀú
30
31
ûꢀÿꢀ
ꢀýþ
27) SOUND button
Selects sound balance and tone controls for adjustment
with the cursor buttons.
28) VOL + / - buttons
Adjust the volume.
29) GOTObutton
Skip directly to a specific location on a DVD disc.
30) BAND / REPEAT-DISC button
Switch between AM(MW) or FM.
Repeat chapter or title of a DVD.
Repeat single track or whole CD.
31) FM MODE / REPEAT A - B button
Set FM MODE to FM STEREO for FM stereo sound or to FM
MONO for mono sound.
Perform point-to-point repeat playback on a DVD or CD.
(Continued on next page)
E - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Functions
Front and Top Panel
3
5 6
8 9 10
1
2
4
7
1) Disc tray
5)
6)
PLAY button
Press to start or resume playback
STOPbutton
OpenorclosetraybypushingOPEN/CLOSEbutton.
Place a disc on the disc tray, label side up.
2) STANDBY indicator
Stop playing a disc.
When the Unit is turned on by pressing the
STANDBY/ONbutton.Ifyoupressthe STANDBY/
ON button on the remote control, the Unit will turn off
and go into standby mode. The light will continue to
illuminate.
7) FUNCTIONbutton
Select the source.
8) VOLUME controls
Changetheloudnessofthesoundfromthespeakers
connected to the Unit.
9) STANDBY/ON button
3) Displaywindow
Display system information.
Turn the power on or off.
10) Remote sensor
4)
OPEN/CLOSEbutton
Use to open and close the disc tray.
Receive the remote control unit signals.
Note:
Screen saver - If no button is pressed within 2 minutes, the function will active. If you want to return the normal screen,
press any button.
Rear Panel
11 12 13 14 1516 17 18
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LE FT
REAR FRONT
FM ANT.
300
Ω
SUWOOFER
IMPohm
CENTER
IMP. ohm
6
19 20 2122 23 24 25
26
11) Right FRONT speaker terminals
12) SUBWOOFER terminals
13) Left REAR speaker terminals
14) FM ANTENNA jack
15) DIGITAL AUDIO OUT jack
16) COMPONENT VIDEO jacks (Y, PB/CB, PR/CR)
17) VIDEO OUT jack
19) Right REAR speaker terminals
20) CENTER speaker terminals
21) Left FRONT speaker terminals
22) AM(MW) LOOP ANTENNA terminal
23) S-VIDEO OUT jack
24) Left/Right AUDIO OUT jacks
25) VIDEO IN (VCR) jack
18) Left/Right AUDIO IN jacks
26) Power cord
E - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Front Panel Display
REPEAT
indicator
Displayed during repeat
of CD/DVD playback.
1
playback
DOLBY PRO LOGIC II
indicator
When Dolby Pro Logic
sound is selected in AV_IN
mode, the light will
illuminate.
DOLBY DIGITAL indicator
Displays while Dolby
Digital sound processing
is being performed or
when the loaded disc
contains Dolby Digital
sound.
REPEAT A-B playback
indicator
Displayed during repeat
of specific section of DVD
playback.
OPERATION indicator
MEMORY indicator
ANGLE indicator
Indicates the operation
status of the disc and Unit.
Displayed
programmed playback.
during
Appears when multiple
camera
angles
are
recorded in the section of
the DVD that is currently
playing.
Display Information
The DVD displays the information shown below on the TV screen and on the Unit's DVD display depending
on the operation status.
Display Examples
TV Screen
No Disc
Unit Display
Remarks
"
" appears when the tray is closed and:
If no disc is loaded
when the Main Unit
is switched on.
1)There is no disc in the tray.
2)The disc type is not playable in this Unit.
3)The disc is not loaded correctly (upside-down, etc.)
Tray open
Close
Tray closed
Loading
Loading...
Stop
Play
Stopped
Playing
Paused
The display changes to show other indicators.
(total time, etc.)
Freezes the image on the screen or pauses audio playback.
Pause
x 2
Fast forward
Fast reverse
Slow
The display changes to show other indicators.
(total time, etc.)
x 2
1/2
/
Does not function for Audio CDs.
Repeat A - B
Rep A- Rep A-B
A-B
Repeat a specific section.
The operation is not permitted by the DVD Unit or the disc.
Region (Local) Number Error Indicator
If the region (local) number of the disc that you attempt to play differs from the region number of the Unit. "Invalid Region"
appears on the TV screen. (The disc cannot be played).
E - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
For better reception
FM
Connect FM antenna (supplied) to the FM ANTENNA jacks.
AM(MW)
Connect the loop antenna (supplied) to the AM(MW) LOOP ANTENNA terminals.
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
A.Connecting your TV
The unit can be connected to your TV in several different ways, depending on the design of your TV.
RCA Audio/Video cable
Use the Audio/Video cable (supplied). Connect the VIDEO OUT and left/right AUDIO OUT jacks on the unit to the VIDEO
IN and left/right AUDIO IN jacks on your TV.
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
(red)
(white)
(yellow)
Audio/Video cable (supplied)
Note:
If you want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT jacks
from the Main Unit to your TV.
or
S-Video cable
Use an S-Video cable (not supplied) and the Audio cable (not supplied).
1. Use an S-Video cable to connect the S-VIDEO (DVD) jack on your unit to the S-VIDEO IN jack on your TV.
2. Next, use the Audio cable to connect the left/right AUDIO OUT jacks on the unit to the left/right AUDIO IN jack on your
TV.
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
Audio cable (not supplied)
(red)
(white)
S-Video cable (not supplied)
E - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
Setup
or
Componentvideooutputs(DVD)
Some TVs or monitors are equipped with component video inputs.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN
jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your
Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on
your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to view the higher
quality picture playback.
Progressiveoutputs(DVD)
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively
scanned video signal.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN
jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your
Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on
your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to enjoy highest
quality picture with less flicker.
Press the SETUP button and select Video Output to YUV. Connect the component video cable to TV, press the P.
SCAN button on the remote control when DVD is stopped. "P. SCAN" display. You can select the output signal for
better picture quality.
Attention:
• When progressive output is activated, there is no video signal output from S-video and RCA (CVBS) video jacks.
• Make sure your TV supports progressive scan component video signal, press the P. SCAN button repeatedly until
"CVBS" is displayed to go back to CVBS video signal.
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
Audio cable
(not supplied)
(white)
To
Y
To
PB/CB
VIDEO
OUT
To
PR/CR
VIDEO
OUT
VIDEO
OUT
(red)
To
Y
VIDEO IN
To PB/CB VIDEO IN
Component video cable (not supplied)
To PR/CR VIDEO IN
or
CoaxialAntennaJack
Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In order to connect this Unit
to these TVs, you must purchase an RF modulator (availabel in teh Audio/Video department of most electronics
Notes :
• Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted
because DVD discs are copy protected.
• When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connection.
• Refer to the instruction manual of the connected equipment as well.
E - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
Setup
B. Connecting a VCR
1. UsingthesuppliedAudio/Videocable, connecttheyellowplugfromVIDEOOUTjackonyourUnit toVIDEOINjackonyourTV, connect
theleftandrightAUDIOOUTjacksonyourUnittoAUDIOINjacksonyourTV.IfyouwantthesoundcomefromthespeakersoftheMain
Unit, you need not to connect these left and right Audio cable from the Main Unit to yourTV.
2. Using theVideo cable (not supplied), connect theVIDEO IN (VCR) jack on your Unit toVIDEO OUT jack on yourVCR.
3. Using the Audio cable (not supplied), connect the left/right AUDIO IN jacks on your Unit to the AUDIO OUT jacks on yourVCR.
Watching aVideotape
1. Turn on the Unit, use the
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
FUNCTION button on the
remote control or the front
paneltoselect"AV_IN".
2. Turn on yourTV and follow
theinstructionsincludedwith
it to select VIDEO function
which corresponds to the
VIDEO IN jack that is
connected with the Main
Unit.
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
Audio cable
(not supplied)
(white)
(red)
(yellow)
3. Turn on theVCR and follow
theinstructionsincludedwith
ittoplaythevideotape.
Audio/Video cable
(supplied)
Video cable (not supplied)
(white)
(red)
Notes:
• IfyouhaveamonoVCR, the
volume level from the
speakerswillbelow.Toavoid
this, connect the left/right
(yellow)
audio out from the Unit to the left/right audio inputs on yourTV using the supplied A/V cable.
• S-video and ComponentVideo jacks (Y, PB, PR) is only for DVD.
C. Connecting another source
Analogue connection
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jack on your Unit to the AUDIO IN jack.
Digital connection
Using the Coaxial Digital Audio
SPEAKER
RIGHT
FRONT REAR
IMP.
6
ohm
LEFT
REAR FRONT
FM ANT.
300
Ω
cable (not supplied), connect
the DIGITAL AUDIO OUT on
your Unit to the DIGITAL
AUDIO IN jack on your
another equipment.
SUBWOOFER
IMP. ohm
CENTER
IMP. ohm
6
6
ÿþýüûúúýþùøú÷ø
Listening to another audio
equipment
1. Turn on the Unit.
2. Turn on your audio
equipment and follow the
instructions included with it
to select the AUDIO IN or
DIGITAL IN function.
ANALOGUE
CONNECTION
(red)
Audio cable
ÿþýüûúûùø÷öú÷
ꢀùøùö÷ùꢀ þ÷ꢀ ùꢀ
ꢀöꢀ÷ûꢀüꢀùꢀ
(not supplied)
(white)
Audio equipment with digital
audio input jack
Coaxial digital audio cable
(not supplied)
DIGITAL
CONNECTION
Notes:
• When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connection.
• If the external equipment is a television and this audio system is closed to it, you may experience interference if the tuner
function is selected while the television is working.
• If you have a stereoVCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will
be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
• Refer tot he instruction manual of the connected equipment as well.
E - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
Setup
D. Connecting the speakers & subwoofer
Thespeakercordshave
been color-coded to
simplify connection.
JustplugthePOSITIVE
(+) and NEGATIVE (-)
ends of each speaker
FRONT (RIGHT)
REAR (RIGHT)
REAR (LEFT)
FRONT (LEFT)
wire
into
the
corresponding jacks on
the rear of the Unit,
matching the color tube
ontheendofthespeaker
wire to the color-coded
connector.
SUBWOOFER
CENTER
E. Positioning the speakers and subwoofer
FRONT SPEAKERS
Place on both sides of
the TV, equal distances
apart.
CENTER
Place on the top of or below the TV.
REAR SPEAKERS
Place right beside or slightly behind
your listening position, and a little
higher than your ears.
SUBWOOFER
Can be placed anywhere.
E - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
Setup
Mounting rear surround speakers
1) Mark the correct mounting position on the wall.
2) Insert a fixing screw(s) at the marked position on the wall.
3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked.
Need More Help?
DO NOT RETURN THIS TO THE STORE
Please call Customer Service at 1-800-252-6123
Turning on the Unit and TV
1)Press the STANDBY/ON button to turn the Unit ON, or
2)Press the STANDBY/ON button on the remote control or the FUNCTION button or the PLAY button to turn on
the Unit while the Unit is in standby mode.
3)Turn on the TV by pressing its POWER button.
4)Select the channel on your TV corresponding to the VIDEO IN jack that the Unit is connected to. See TV User
guide for more information.
• If you have connected the Unit successfully, the DVD logo (start-up picture) will appear on your TV screen.
Notes :
• Whenever no disc or disc stop for 60 minutes, the system will be turned to POWER standby mode automatically.
• The LED of Standby will be turned on while the unit is at standby mode.
Power cord connection
• Make sure that all the components and speakers are connected correctly.
• To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
• Be sure the AC power cord is disconnected and all functions are off before making connections.
• When you are not going to use the Unit for a long period of time, disconnect the power cord.
E - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound
To adjust the surround sound balance while Dolby Digital and Pro Logic II decoding is in
effect
Usetheremotecontroltomakethefollowingchangestospeakerbalance:
Front speaker (left)
• PresstheSOUNDbuttonrepeatedlytodisplay
will show on the display of the Unit.
Front speaker (right)
, thenpressthe or CURSORbuttontoadjustthesoundlevel. It
• Press the SOUNDbutton repeatedly to display
will show on the display of the Unit.
Center speaker
, then press the or CURSOR button toadjust the sound level. It
• PresstheSOUNDbuttonrepeatedlytodisplay
will show on the display of the Unit.
Rear speaker (left)
, thenpressthe or CURSORbuttontoadjustthesoundlevel. It
• PresstheSOUNDbuttonrepeatedlytodisplay
will show on the display of the Unit.
Rear speaker (right)
, thenpressthe or CURSORbuttontoadjustthesoundlevel. It
• PresstheSOUNDbuttonrepeatedlytodisplay
will show on the display of the Unit.
Subwoofer
, thenpressthe or CURSORbuttontoadjustthesoundlevel. It
• PresstheSOUNDbuttonrepeatedlytodisplay
will show on the display of the Unit.
Note :
, thenpressthe or CURSORbuttontoadjustthesoundlevel. It
• If you do not press any button within a few seconds, the display will return to normal.
To adjust the sound quality
PresstheSOUNDbuttonrepeatedlytoselectanequalizationmode(BASSandTREBLE).Pressthe or CURSORbutton
toadjustthesoundlevel.
BASS : the low range of sounds
TREBLE : the high range of sounds
Bass and treble control the sound from the front left and right speakers.
DolbyDigital
DolbyDigitalisasoundsystemdevelopedbyDolbyLaboratoriesInc.thatgivesmovietheatreambience
toaudiooutputwhentheUnitisconnectedtoaDolbyDigital5.1channelprocessororamplifier.
ThisUnitautomaticallyrecognizesDVDsthathavebeenrecordedwithDolbyDigital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your DVD
Unit.
DolbyProLogicIIcreatesfivefull-bandwidthoutputchannelsfromtwo-channelsources.Thisisdone
usinganadvanced,high-puritymatrixsurrounddecoderthatextractsthespatialpropertiesoftheoriginal
recordingwithoutaddinganynewsoundsortonalcolorations.
Movie Mode (MOVIE)
The Movie mode in Pro Logic II is very similar to that of the original Pro Logic decoder. The main difference is that it has stereo
surroundchannelsandnosurroundfilter,unlikeProLogicwhichhasamonosurroundchannelanda7kHzsurroundfilter.Movie
modeisthestandardrequiredforallA/Vsystems.Whenanautosoundunithasavideoscreen,itisalsoconsideredanA/Vsystem.
It can be called simply "Pro Logic II".
Music Mode (MUSIC)
The Music mode offers users some flexibility to control the end results to their own taste. Music mode should not be used with
THXaudioprocessingmode.Musicmodeisrecommendedasthestandardmodeforautosoundmusicsystems(withoutvideo),
andisoptionalforA/Vsystems.ItisrecommendedthatMusicmodebeidentifiedasthe"Music"versionofProLogicII,todistinguish
itfromtheMoviemode.
E - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
DVD
CD
Playing a Disc
Basic playback
This owner’s manual explains the basic instructions of this DVD Unit.Some DVD discs are produced
in a manner that allows specific or limited operation during playback.As such, the DVD Unit may
not respond to all operating commands.This is not a defect in the DVD Unit.Refer to the instruction
notes of discs.
“
”may appear on theTV screen during operation. A“
”means that the desired operation
is not permitted by the DVD Unit or the disc.
Playing a Disc
1.Press the STANDBY/ON button on the front panel or press the STANDBY/ON button on the remote control to
turn on the Unit while the Unit is in standby mode, press the FUNCTION button to select DVD mode.
See CUSTOMIZINGTHE FUNCTION SETTINGS before proceeding to step 2.
2.Press the OPEN/CLOSE button. The disc tray opens.
3.Place the disc on the disc tray with the label side up.
4.Press the OPEN/CLOSE button. The disc tray closes.
It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start
playback of the disc.
5.Press the PLAY button.
Notes:
• Use the OPEN/CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you
may damage the Unit.
• Let the disc tray open completely before removing the disc. Press the OPEN/CLOSE button to close the disc
tray after you remove the disc.
Pausing playback (still mode)
Press the PAUSE button. To resume normal playback, press the PLAY button.
II
Stopping playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the Unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
To skip to a different track
• Press the
• Press the
PREV button on the remote once to skip to the start of the previous track.
NEXT button on the remote to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
E - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Playing a Disc
DVD
CD
Fast Forward/Fast Reverse
The speed of fast scan
1.Press the TUNING
or
TUNING button when a disc is playing.
• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time TUNING
button is pressed, the speed of fast scan changes in the following
sequence:
or
TUNING
x 2
2.Press the
PLAY button when you reach the desired point to resume playback at normal speed.
DVD
Slow-motion play
1.Press the SLOW
button in the play mode.
• Two speeds are available. Each time SLOW
button is pressed, the speed of slow-motion playback changes
in the following sequence:
x 1/2
x 1/4
2.Press the
PLAY button to return to the normal playback speed.
DVD
CD
SKIP (Forward / Reverse)
While you are playing a disc, press the
NEXT button of the remote to move to the beginning of the next chapter
or track. Press the
playing it.
PREV button of the remote to move to the previous chapter or track and automatically start
Zooming into an image
While a disc is playing, press the ZOOM/TV MODE button.
• While an image is zoomed, you can use
,
,
and button to shift the view and display the part you want.
• To return to the normal view, press the ZOOM/TV MODE button until the “
return to normal.
“ symbol shows. The screen will
off
• When you reach the edge of the image, the display will not shift anymore in that direction.
(continued on next page)
E - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Playing a Disc
Angle selection
Some DVDs contain scenes which have been shot from a
number of different angles. For these discs, the same scene
can be viewed from each of these different angles.
2/3
1.While you are playing a DVD with different angles recorded,
press the ANGLE button to view the number of the current
angle.
Number changes to show the number of the current
angle. (The maximum number of possible angles is 9)
2.Press the ANGLE button repeatedly to change the scene
to the next angle in those recorded.
• About two seconds later, playback continues from the new
angle you selected.
• If no button is pressed within 10 seconds, playback
continues without changing the current angle.
Sequence of angle shots
(Example)
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
1/1
• If only one angle is recorded, “
” is displayed.
Audio selection
On some discs, the sound is recorded in two or more formats.
Follow the directions below to select the type of playback.
1.While a disc is playing, press the AUDIO button to show the
current audio format number.
2.Press the AUDIO button repeatedly to select the desired
Recorded audio format number changes sequentially.
(The maximum number of possible audio formats is 8)
audio format.
Notes :
• If only one audio format is recorded, the number does not change.
• About two seconds later, playback continues in the new audio format.
Subtitle selection
1.While a DVD is playing, press the SUBTITLE button to
display the current language setting, as shown in the
example below.
2/3 Spa
2.Press the SUBTITLE button repeatedly to select the desired
subtitle language.
Recorded language changes sequentially.
Notes :
• If only one language is recorded, the language does not change.
• About two seconds later, playback continues with the new subtitle you selected.
• The number of languages recorded differs depending on the disc.
• If no button is pressed within a few seconds, playback continues without changing the current subtitle.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the
main menu.
E - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Special Functions
Basic playback
DISPLAY function
Using DISPLAY, you can check and change the current settings of the following items:ANGLE, AUDIO and SUBTITLE.
• While the disc is playing, press the DISPLAY button to display the screen shown below.
Elapsed time: Elapsed time from the beginning of the chapter which is currently playing.
Remaining time: Remaining time of the title which is currently playing.
Elapsed Time
Remaining Time
• Press the DISPLAY button twice to display the screen shown as below.
• Press the ANGLE, AUDIO and SUBTITLE button to change the selected item.
Chapter
Time
Title
DVD
00:09:29 01:25: 27
Title 1/10 Chapter 3/15
Audio
Angle 1/3
Angle setting
Audio setting
Subtitle setting
2/3 Spa
Subtitle
BitRate
7.1 Mbps
Title skip
• The number of the title currently playing and total titles of disc.
• Press the GOTO button to set your desired title, then press the ENTER button to confirm.
Chapter skip
• The number of the chapter currently playing and total chapters of the currently played title.
• Press the GOTO button to set your desired chapter, then press the ENTER button to confirm.
Time skip
• Elapsed time from the beginning of the currently playing chapter and the remaining time from the beginning of the
currently playing title.
• Press the GOTO button to set your desired point to start playback, then press the ENTER button to confirm.
Angle setting
• The current angle is displayed. When a disc with only one angle is played back, “ Angle 1/1” is displayed.
• Press the ANGLE button to select the desired angle.
Audio setting
• The type of audio currently selected is displayed.
• Press the AUDIO button to select your desired type of audio.
Subtitle setting
• The subtitle number and language currently selected is displayed. When a disc with only one subtitle is played
back, “ 1/1 Eng” is displayed.
• Press the SUBTITLE button to select your desired language.
GOTO function
This function allows you to skip directly to any part of the disc while a disc is playing.
Note :
• After settings, press the DISPLAY button again to return to the normal screen.
(continued on next page)
E - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Special Functions
DVD
Locating a specific title
If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number.
1.In stop mode, press the GOTO button.
2.Press
want.
,
or button to highlight a specific field and press the corresponding number button(s) for the title you
3.Press the ENTER button to confirm. The Unit will start playback about 3 seconds later.
DVD
CD
Locating a specific title / chapter / track
If you know the title / chapter / track number you want to play, you can locate a specifc title / chapter / track by directly
selecting a title / chapter / track number.
1.Press the GOTO button to search your desired title / chapter / track.
2.Press
,
or button to highlight a title / chapter / track and press the corresponding number button(s) for the
chapter you want.
3.Press the ENTER button to confirm. The Unit will start playback about 3 seconds later.
DVD
CD
(continued on next page)
E - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Special Functions
DVD
CD
Locating a specific time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).
1.Press the GOTO button.
2.Press or button to highlight time.
DVD
CD
3.Press the corresponding number buttons for the setting point you want.
• The first two numbers you entered represent hours.
• The second two numbers you entered represent minutes.
• The third two numbers you entered represent seconds.
4.Press the ENTER button to confirm. The Unit will start playback about 3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD disc.
• You can move through the menu by pressing the and buttons.
DVD
Angle setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many angles are
recorded on the disc.
2.Press the ANGLE button repeatedly to select your desired angle.
3.The Unit will change to your desired angle about 3 seconds later.
BitRate
7.1 Mbps
DVD
Audio setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many audio
formats are recorded on the disc.
2.Press the AUDIO button repeatedly to select your desired type of
audio.
3.The Unit will change to your desired type audio about 3 seconds
later.
BitRate
7.1 Mbps
DVD
Subtitle setting
1.Press the DISPLAY button twice. The FUNCTION menu is
displayed on the screen and you can see how many subtitle
formats are recorded on the disc.
2.Press the SUBTITLE button repeatedly to select your desired
language.
3.The Unit will change to your desired language about 3 seconds
later.
BitRate
7.1 Mbps
E - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
playback
CD / DVD programmable memory
DVD
Programmable memory
The two types of programmed playback provided by this Unit are title programmed playback and chapter
programmed playback.
Title / Chapter programmed playback
1.Press the MEMORY button while the disc is stopped.
2.Enter the title numbers in - - . Use or button to move the highlight to chapter and enter the chapter numbers
in - -
.
Title
Chapter
3.Use
,
,
or button to move to the other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Notes :
• If you press the STOP button twice at programmed playback mode, the programmed playback function will be
cancelled.
CD
Programmable memory
Track programmed playback
1.Press the MEMORY button while the disc is stopped.
2.Enter the track numbers in - - -
.
Track
3.Use
,
,
or button to other field.
4.Repeat steps 2 to 3.
5.Press the PLAY button to start the programmed playback.
Notes :
• When the unit is playing at program memory mode, the “MEMORY” will display on display window.
E - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
playback
Repeat Playback
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, A-B repeat)
DVD
Repeating a title
You can play the same title repeatedly.
1.While the disc is playing, press the REPEAT DISC button until the “
”
Repeat Title
indicator displays on the screen. The current title is played repeatedly.
Repeating a chapter
You can play the same chapter repeatedly.
2.While the disc is playing, press the REPEAT DISC button until the
Repeat Chapter ” indicator displays on the screen.The current chapter is played
“
repeatedly.
To resume normal playback
Off
3.While the disc is playing, press the REPEAT DISC button until the “
”
indicator displays on the screen.
You can play a single track and whole disc repeatedly.
CD
Repeating a single track
You can play the same track repeatedly.
1.While the disc is playing, press the REPEAT DISC button until the
Repeat Single ” indicator displays on the screen. The current track is played
“
repeatedly.
Repeating a whole disc
2.While the disc is playing, press the REPEAT DISC button until the “ Repeat All
”
indicator displays on the screen. The whole disc is played repeatedly.
To resume normal playback
3.Press the REPEAT DISC button until the “ Off ” indicator displays on the
screen.
DVD
Repeating a specific section
You can play a specific section repeatedly.
1.While the disc is playing, press the REPEAT A-B button at the beginning of
the section ( Rep A - ) is displayed you want to play repeatedly.
2.Press the REPEAT A-B button again at the end of the section ( Rep A - B ) is
displayed.
3.The Unit will immediately begin replaying your selection.
To resume normal playback
4.While the disc is playing, press the REPEAT A-B button until the “ Off ”indicator
displays on the screen.
Notes :
• A-B repeat can only be used within the same title. If the start and end of the section to be repeated are in different titles,
A-B repeat is cancelled.
• The A-B repeat function does not operate in scenes where different camera angles are recorded.
E - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing MP3 and Picture File Disc
This Unit will play MP3 and Picture files recorded on CD-R disc.
Playing a MP3 file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2. Insert a MP3 file disc on the disc tray with the label side up.
3. Press the OPEN/CLOSE button, the disc tray closes.
4. The Unit will take a short while to load the disc and automatically
begin playback.
To pause playback
•
Press the
PAUSE button. To resume playback again, press the
PLAY button.
To stop playback
•
Press the STOP button.
To skip to the next or previous file
•
Press the
NEXT button on the remote control briefly while playing, to skip ahead to the beginning of
the next file. Each time you press the button consecutively, the beginning of the next file is located and
played back.
•
•
Press the
PREV button on the remote control briefly while playing, to skip back to the beginning of the
previous file. Each time you press the button consecutively,the beginning of the previous files is located
and played back.
You also can press the GOTO button, set the track number you want and then press the ENTER button.
Note:
•
You can not play in Fast reverse or Fast forward during MP3 playback.
On-screen display
Turn on your TV to view the on-screen display of MP3 files.
•
Press the
,
,
or CURSOR button on the remote control to select the file you want to listen to, then
press ENTER button and this selected file is located and played back.
Notes:
The ability of this Unit to read MP3 discs is dependent on the following:
•
•
•
•
•
The Bit Rate must be within 64 - 256 kbps.
The total number of files on the disc should not exceed 254.
The maximum number of directories should not exceed 32.
The maximum depth level of directories should not exceed 4.
File names should be named using 12 or fewer letters and/or numbers, and must incorporate the “MP3” file
extension. EXAMPLE: ********.MP3 where each * is a letter or number.
Use only letters and / or numbers in file names. If you use special characters, the file and/or folder names
may not be displayed correctly on the on-screen display.
•
•
•
•
When recording on CD-R discs, use 74-minute (650MB) discs.
The CD-R discs should be “finalized” in computer by “single session format”.
See your CD/MP3 creation software for details.
E - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued to next page)
Playing MP3 and Picture File Disc
Playing a Picture file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2. Insert a Picture CD on the disc tray with the label side up.
3. Press the OPEN/CLOSE button, the disc tray closes.
4. The unit will take a short while to load the disc.
5. Press the
PLAY button. The next picture will automatically display after 6 seconds.
Full-Screen
Review
Thumbnail
Review
PREV
NEXT
Notes:
•
If you press the MENU button on the remote control in full-screen review, the Unit will display a menu of 9
thumbnail images.
•
Use the cursor to highlight the
NEXT or
PREV in thumbnail screen and then press the ENTER
button to review other images. If you want to review one image in full-screen, you can use the CURSOR
,
,
or
button to highlight the image and then press the ENTER button to confirm. The image you
selected will show on TV in Full-Screen and automatically display one by one again in about 6 seconds
intervals.
•
•
You can press the PAUSE button to interrupt playback, and press the
You also can use GOTO function or use the numbered buttons to enter the number to quickly select any
image.
PLAY button to resume playback.
•
•
You can press the ZOOM button to enlarge the picture in 3 levels.
Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
Playing a MP3/Picture file disc
1. Press the OPEN/CLOSE button, the disc tray opens.
2. Insert a MP3 files/Picture CD on the disc tray with the label side up.
3. Press the OPEN/CLOSE button, the disc tray closes.
4. The unit will take a short while to load the disc.
5. Use
,
,
or
button to select MP3 or Picture CD, then press the
ENTER button.
Note:
•
The SETUP button does not work during MP3 or Picture Disc playback
or stop.
E - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing the Function Settings
LANGUAGE setting
1.Press the FUNCTION button until DVD appears on the display.
2.Press the STOP button so that no disc is playing.
3.Press the SETUP button.
4.Use or button to select the Language, then press the ENTER button.
5.Use
or
button to English, then press the ENTER button. The screen will change to English Wordings
immediately.
6.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
VIDEO setting
TV Shape
1.Press the SETUP button.
2.Use or button to select Video, then press the ENTER button.
3.Use or button to select TV Shape, then press the ENTER button.
4.Use or button to shift and select the TV type, then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
E - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
Cut off when a wide-screen video image is played.
4:3 Pan Scan
• When wide-screen video material is played, this mode clips the right and left
sides of the image so that it can be viewed on a conventional TV screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands top and bottom).
4:3 Letter Box
• When wide-screen video material is played in this mode on a conventional TV
screen, black bands appear at the top and bottom of the screen.
16:9 Wide-screen
• This is the correct mode for playing wide-screen videos on a wide-screen TV.
• You must also set the screen mode on your wide-screen TV to "FULL".
The actual appearance of the image
depends on the screen mode setting
of your wide-screen TV.
Notes :
• The displayable picture size is preset on the DVD disc.Therefore the playback picture of some DVD discs may not
conform to the picture size you select.
• When you play DVD discs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3
picture size regardless of the TV shape setting.
• If you select 16:9 wide-screen mode and you own a 4:3 TV set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be horizontally compressed. Always be sure that your TV shape
conforms to the actual TV in use.
Video Output
1.Press the SETUP button.
2.Use or button to select Video, then press the ENTER button.
3.Use or button to select Video Output, then press the ENTER button.
4.Use or button to shift and select the signal, then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
CVBS : Corresponding to your TV which has a video or S-video input.
YUV : Corresponding to your TV which has a YUV input.
Attention :
Always set Video Output in CVBS, otherwise, the picture on the TV may be distorted. If this occurs, and you cannot
see the screen, press the P. SCAN button twice until the "CVBS" display.
E - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
Brightness
1.Press the SETUP button.
2.Use or button to select Video, then press the ENTER button.
3.Use or button to select Brightness, and then press the ENTER button.
4.Use or button to shift and select the Off/On, then press the ENTER button.
5.If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button.
On : Picture will be brighter to clarify details.
Off : Picture will have deepened colors.
Note:
• Actual effect on pictures will vary depending on the TV.
Edges
1.Press the SETUP button.
2.Use or button to select Video, then press the ENTER button.
3.Use or button to select Edges, and then press the ENTER button.
4.Use or button to shift and select the Sharpen / Soften / Off, then press the ENTER button.
5.If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button.
Sharpen : Fine detail will be easier to see.
Soften : Soft-focus effect.
Off : Picture will be returned to normal.
E - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
AUDIO setting
Digital Out
1.Press the SETUP button.
2.Use or button to select Audio, press the ENTER button.
3.Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type.
4.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Raw : Does not have a Dolby Digital Decode.
PCM : Do have a Dolby Digital Decode.
L/R Speaker
1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use or button to L/R Speaker, and then press the ENTER button.
4.Use
or button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
L/R Speaker
Small : Small size of Speaker.
Large : Large size of Speaker (speaker diameter normally larger than 4 inch or 10 cm)
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND".
E - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
Subwoofer
1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use
4.Use
or button to Subwoofer, and then press the ENTER button.
or button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Subwoofer
"On" should be selected if your subwoofer is connected.
If "Off" is selected, no sound will be emitted by subwoofer.
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND".
Surround Delay
1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use
or
button to Surround Delay, then repeatedly press the ENTER button to select the desired Surround
Delay type. 0/15ms, 5/20ms, 10/25ms or 15/30ms appears.
4.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Notes:
• The first number represents the Dolby Digital and the second number represents the Pro Logic.
• The delay adjustment depends on the location of your surround speakers and the front speakers. If the location
of the surround speakers is closer than the front speakers, the delay adjustment can compensate the distance
difference.
E - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
Center Delay
1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use
or button to Center delay, then repeatedly press the ENTER button to select the desired Center Delay
type. 0ms, 1ms, 2ms, 3ms, 4ms or 5ms appears.
4.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Note:
• This delay adjustment depends on the location of your center speaker. If the distance between the center speaker
and the listener is less than the distance between the front right and left speaker and the listener, this delay
adjustment is balanced.
Pink noise
1.Press the SETUP button.
2.Use or button to select the Audio, press the ENTER button.
3.Use
4.Use
or button to Pink noise, and then press the ENTER button.
or button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Pink noise
Off : Pink noise test mode should always be switched off, unless you are testing your speakers.
Left : Pink noise comes out from front left speaker for testing.
Center : Pink noise comes out from center speaker for testing.
Right : Pink noise comes out from front right speaker for testing.
Left sur : Pink noise comes out from rear surround left speaker for testing.
Right sur : Pink noise comes out from rear surround right speaker for testing.
Subwoofer : Pink noise comes out from subwoofer for testing.
Note :
• When using the pink noise generator to test your speakers, you can press the SOUND button on the remote
control to adjust the channel balance. Please "Adjusting the Sound".
E - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
RATING setting
Password/Parental lock
DVD discs equipped with the password function are rated according to their content. The contents allowed by a
parental lock level and the way a DVD disc can be controlled may vary from disc to disc.
For example, if the disc allowed, you could edit out violent scenes unsuitable for children and replace them with
more suitable scenes, or you could lock out playback of the disc altogether.
1.Press the SETUP button.
2.Use or button to select Rating, press the ENTER button.
3.Use
level.
4.Use
button.
or button to select Parental lock and then press the ENTER button repeatedly to set the parental lock
or button to shift and select Password, enter your 4-digit security code and then press the ENTER
You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock
function.
The parental lock level is equivalent to the following ratings.
Level 1 : Kid Safe
Level 2 : G
Level 5 : PG_R
Level 6 : R
Level 3 : PG
Level 4 : PG_13
Level 7 : NC_17
Level 8 : Adult
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Indicates Parental lock is NOT active.
The Parental lock is active.
If you forget the password, you can erase your current password by pressing
number button 8 on the remote four times, then press the ENTER button to
confirm the setting.
PASSWORD : 8 8 8 8
E - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued on next page)
Customizing the Function Settings
Factory Set
If you want to return the initial language setting to the factory default, do the following:
1.Press the SETUP button.
2.Use or button to select the Rating, then press the ENTER button.
3.Use or button to shift and select the Factory Set, then press the ENTER button.
4.Use or button to shift and select Yes, then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Note:
When you reset the Unit to the factory default, the Unit will take 3-5 seconds to reset.
E - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
Tuning into a station manually
1.Press the FUNCTION button until the frequency band appears
on the display.
2. Press the BAND button on the remote remote or STOP button
on the front panel to select the desired band.
3.Press the
TUNING
button to tune in the desired station.
FM Stereo
• Press the FM MODE button on the remote until " [ ST ] " appears
on the display.
Weak FM stations
• Press the FM MODE button on the remote until the "
"
word appears on the display. Background noise will be reduced
but the signal reproduced will be mono. To restore stereo
reception, press the FM MODE button on the remote to select
STEREO.
Note:
• The left / right front speakers and subwoofer are activated only.
To search for a station automatically
• Hold down the
TUNING
buttons on the remote for 1 to 2 seconds, and a station is searched for automatically.
After tuning in a station, the search stops.
• The search may not stop at a station with a very weak signal.
Presetting stations
You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on AM(MW) band can be preset.
1.Press the FUNCTION button until the frequency band appears on the display.
2. Press the BAND button on the remote to select the desired band.
3.Use the
4.Press the MEMORY button on the remote.
5.Press the NEXT or PREV button to select the preset number and press the MEMORY button on the remote
to store the station.
TUNING
button to find your desired station.
6.Repeat steps 2-5 to store other stations.
Tuning into a preset station
1.Press the FUNCTION button on the front panel until the frequency band appears on the display.
2. Press the BAND button on the remote to select the desired band.
• Press the PLAY button and
NEXT or PREV
button to select the presetted station or use the numbered
buttons to enter the number to select the presetted station.
Example: To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
E - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List for Disc Language
Code Language Name
Language Name
Frisian
Language Name Code Language Name
Code
FY
GA
GB
GL
GN
GU
HA
HI
Code
MG
MI
Afar
Malagasy
Maori
Slovenian
Samoan
Shona
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
Abkhazian
Afrikaans
Ameharic
Arabic
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
Somali
Albanian
Serbian
Siswat
Assamese
Aymara
Azerbaijani
Bashkir
Byerlorussian
Bulgarian
Bihari
Hindi
Sesotho
Sundanese
Swedish
Swahili
Tamil
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Maltese
Burmese
Nauru
HR
HU
HY
IA
Nepali
Bislama
Bengali
Bangla
Dutch
Telugu
IE
NL
Norwegian
Occitan
Tajik
BN
IK
NO
OC
OM
OR
PA
Indonesian
Icelandic
Italian
Thai
IN
Tibetan
(Afan) Oromo
Oriya
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
BO
BR
CA
CO
CS
IS
Breton
TK
TL
TN
IT
Catalan
Corsican
Czech
Hebrew
Panjabi
Polish
IW
JA
JI
Japanese
Yiddish
PL
Pashto, Pushto TO
PS
CY Welsh
DA Danish
Javanese
Georgian
Kazakh
Portuguese
Quechua
Rhaeto-
Romance
Kirundi
TR
TS
TT
Turish
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
PT
Tsonga
Tatar
QU
RM
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
German
Bhutani
Greek
Greenlandic
Cambodian
Kannada
Korean
TW Twi
Ukrainian
UK
UR
UZ
VI
RN
RO
RU
RW
SA
SD
SG
SH
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Kashmiri
Kurdish
VO
WO
XH
YO
ZH
ZU
Kirghiz
Latin
Sangho
Xhosa
Lingala
Serbo-
Yoruba
Chinese
Zulu
Laothian
Lithuanian
Latvian, Lettish
Croatian
Singhalese
Slovak
FJ
FO
FR
Faroese
French
SI
LV
SK
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning Disc
A defective or soiled disc inserted into the Unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the centre outwards with a
cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shape discs (example : heart shaped, octagonal, etc.). They may cause malfunctions.
Cleaning the Unit
• Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit.
• Wipe the Unit with a dry soft cloth.
If the surfaces are extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solution
and wrung out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. And do NOT use compressed air to remove
dust.
Important Note
Before transporting the Unit, remove disc from the CD tray.
Trouble Shooting Guide
SYMPTOM
CAUSE (AND REMEDY)
• Check that the AC power cord is connected.
No power.
• The region number of the disc doesn't match the region number of this Unit.
No picture.
1
2
3
4
5
6
• The TV is not set to receive DVD signal output.
• The video cable is not connected.
• The TV is not turned on.
The picture is not clear.
• Clean the disc.
• If video from your system has to go through your VCR to get to your TV, the copy-protection
applied to some DVD programs could affect picture quality. If you still experience problems
after checking your connections, please try connecting your Unit directly to your TV
through the S-Video-input, if your TV is equipped with this input.
• The disc is scratched.
• The DVD unit may be set to progressive scan, moreover, TV does not support Progressive
Scan component video signal. Press the P. SCAN button repeatedly until the "CVBS"
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting Guide
SYMPTOM
CAUSE (AND REMEDY)
• The location and orientation of the antenna are incorrect. If you use an indoor antenna,
change to an outdoor antenna.
• The TV antenna wire is too close to the Unit. Separate the antenna wire of theTV set from
the Unit.
• Check that the speakers and equipment are connected securely.
• Make sure that you've selected the corrected equipment on the system.
No sound or only a very
low-level sound is
heard.
• The system is in pause mode or in Slow-motion Play mode. Press the PLAY button
to return to normal play mode.
• Fast forward or fast reverse is performed. Press the PLAY button to return to normal
play mode.
• Check the speaker settings.
• Make sure that AUDIO output and AV IN input connections correct.
• Adjust the speakers volume.
• The DTS DVD disc cannot be decoded to have speaker output.
• This Unit is too hot, shut off half 30 minutes for cool down.
• You can use the Pink Noise setting to test that the speaker output is present (Please
see Customizing the Function Settings)
Severe hum or noise is
heard.
• Check that the speakers and equipment are connected securely.
• Check that the connecting cords are away from a transformer or motor, and at least 10
feet (3 meters) away from a TV set or fluorescent light.
• Move your TV away from the audio equipment.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• Vibrations from the speakers are affecting the Unit.
The remote does not
function.
• Remove any obstacles between the remote and the Unit.
• Use the remote near the Unit.
• Point the remote at the remote sensor on the Unit.
• Replace all the batteries in the remote with new ones.
The disc does not play.
• There is no disc inside ("No Disc" appears on the TV screen).
• Insert the disc correctly with the playback side facing down on the disc tray.
• Clean the disc.
• A non-NTSC or PAL disc has been inserted. The Unit and disc region number are
incompatible. Press the ZOOM/TV MODE button on the remote to output the video
signal.
• Condensation may have formed inside the Unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
The DVD door cannot
open.
• Reset the Unit, press the STANDBY/ON button to turn off the Unit, wait for a few
seconds, then restart the Unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
|