Venturer Flat Panel Television PLV36220S1 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
PLACEMENT INFORMATION  
• Do not use this unit in places that are extremely  
hot, cold, dusty or humid.  
• Do not restrict the airflow of this unit by placing  
it somewhere with poor air flow, by covering it  
with a cloth, by placing it on bedding or carpeting.  
• The apparatus shall not be exposed to dripping  
or splashing and that no objects filled with liquids,  
such as vases, shall be placed on apparatus.  
WARNING : TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
SAFETY INFORMATION  
• When connecting or disconnecting the AC power  
cord, grip the plug and not the cord itself. Pulling  
the cord may damage it and create a hazard.  
• When you are not going to use the unit for a long  
period of time, disconnect the AC power cord.  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s enclosure  
that may be of sufficient magnitude to constitute a  
risk of electric shock to persons.  
CONDENSATION INFORMATION  
• When left in a heated room where it is warm and  
damp, water droplets or condensation may form  
inside the equipment. When there is condensation  
inside the unit, the unit may not function normally.  
Let the unit stand for 1-2 hours before turning  
the power on or gradually heat the room and let  
the unit dry before use.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
RATING PLATE LOCATION  
The rating plate is located on the rear of the unit.  
The symbol for Class II  
(Double Insulation)  
FCC STATEMENTS  
NOTE: This unit has been tested and found to comply  
with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful  
interference in a residential installation. This unit  
generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communication. However,  
there is not guarantee that interference will not  
occur in a particular installation. If this unit does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
unit off and on, the user is encouraged to try to  
correct the interference by one or more of the  
following measures:  
CAUTION:  
• DANGER OF EXPLOSION IF BATTERY IS  
INCORRECTLY REPLACED. REPLACE ONLY  
WITH THE SAME OR EQUIVALENTTYPE.  
• TO PREVENT ELECTRIC SHOCK, MATCH  
WIDE BLADE OF PLUG TO WIDE SLOT OF  
WALL OUTLET, THEN FULLY INSERT.  
• USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the unit and  
receiver.  
- Connect the unit into a wall outlet on a circuit  
different from that to which the receiver is  
connected.  
WARNING :  
• TO PREVENT FIRE OR SHOCK HAZARD, DO  
NOTEXPOSETHISUNITTORAINORMOISTURE.  
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS  
ON OR NEAR THIS UNIT.  
- Consult the dealer or an experienced radio/TV  
technician for help.  
• SHOULDANYTROUBLE OCCUR, DISCONNECT  
THEAC POWER CORDAND REFER SERVICING  
TOAQUALIFIEDTECHNICIAN.  
WARNING: Changes or modifications to this unit  
not expressly approved by the party responsible  
for compliance could void the user authority to  
operate the unit.  
E - 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with a dry cloth.  
7) Do not block any ventilation openings.  
plugs, convenience receptacles, and the  
point where they exit from the  
apparatus.  
11) Only use attachments / accessories  
specified by the manufacturer.  
12) Use only with the cart, stand,  
tripod, bracket, or table  
specified  
by  
the  
Install  
in  
accordance  
with  
the  
manufacturer, or sold with  
the apparatus. When a cart is  
used, use caution when moving the cart  
/ apparatus combination to avoid injury  
from tip-over.  
manufacturer’s instructions.  
8) Do not install near any heat sources  
such as radiators, heat registers,  
stoves, or other apparatus (Including  
amplifiers) that produce heat.  
9) Do not defect the safety purpose of the  
polarized or grounding-type plug. A  
polarized plug has two blades with one  
wider than the other. A grounding type  
13) Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
14) Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as the power cord or plug is  
damaged, liquid has been spilled or  
objects have fallen into the apparatus,  
the apparatus has been exposed to rain  
or moisture, does not operate normally,  
or has been dropped.  
plug has two blades and  
a
third  
grounding prong. The wide blade or the  
third prong is provided for your safety.  
If the provided plug does not fit into your  
wall outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being  
walked on or pinched particularly at  
TABLE OF CONTENTS  
Connecting a High-Definition (HD) Source  
..................................................................... 10  
SAFETY PRECAUTIONS ................................ 1  
IMPORTANT SAFETY INSTRUCTIONS  
............................................................................. 2  
Connecting a PC ......................................... 10  
Connecting anAudioAmplifier .................... 11  
Connecting the AC Power Cord ................. 11  
TABLE OF CONTENTS ................................... 2  
QUICK INSTALLATION ...............................3-4  
ACCESSORIES ................................................ 5  
GETTING STARTED ......................................... 5  
USING HEADPHONES ................................... 11  
TV SETUP ................................................ 12-16  
Picture Menu ............................................... 12  
Audio Menu ............................................... 12  
TIME Menu ................................................... 13  
Set Up Menu ........................................ 13-14  
Parental Menu ..................................... 14-15  
TV Menu ...................................................... 16  
REMOTE CONTROL REFERENCE GUIDE  
............................................................................. 6  
CONTROL REFERENCE GUIDE ..................... 7  
CONNECTIONS ........................................... 8-11  
Connecting a TV Antenna / Cable / Satellite  
...................................................................... 8  
MAINTENANCE ............................................... 17  
TROUBLESHOOTING GUIDE ....................... 17  
Connecting an A / V Device ........................ 8  
Connecting Devices with a Composite (Yellow  
RCA-Type) Video Output ............................ 9  
Connecting Devices with a Composite (Yellow  
RCA-Type) Video Input ............................... 9  
E - 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK INSTALLATION  
ATTACHING THE BASE STAND  
• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.  
WARNING: The LCD display is very fragile and  
must be protected at all times when attaching  
the base stand. Be sure that nothing hard or  
sharp, or anything that could scratch or damage  
the LCD display, comes in contact with it. Do  
NOT place pressure on the front of the unit at  
any time because the screen could crack.  
The Base Stand  
CAUTIONS:  
• Attach the base stand in the correct direction.  
• Incorrect installation of the stand may result  
in the unit falling over.  
• Be sure to follow the instructions.  
1. Confirm 4 screws (silver screws x2 & black  
screws x2) are supplied with the unit.  
2. Lay the unit down on a flat surface, so the  
Silver  
screws  
(x2)  
backside is facing up, making sure to place  
a soft cushioned material (such as a pillow  
or thick piece of foam) beneath the screen.  
3. Attach the BASE STAND to the opening on  
the rear of the unit.  
Black  
screw  
(x1)  
Black  
screw  
(x1)  
4. Insert and tighten the four screws (supplied)  
into the holes as shown below.  
Note: To detach the base stand, perform the  
steps in reverse order.  
Soft cushion  
MOUNTING ON THE WALL  
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16” x 3 15/  
16” (100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit  
according to the directions included with the mounting kit.  
3 15/16”  
Four  
mounting  
holes  
E - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK INSTALLATION  
When you turn on your television set for the  
first time, be sure to place it on a solid stable  
surface. To avoid danger, do not expose the  
TV to water, or a heat source (e.g. lamp,  
candle, radiator). Do not obstruct the  
ventilation grid at the rear and be sure to  
leave sufficient gaps around the unit as  
shown.  
TURNING ON THE UNIT FOR THE FIRST TIME  
The first time you turn on the unit, the unit will enter Setup mode. You can easily follow the prompt  
message on the screen to complete basic TV settings.  
Make sure the RF aerial has been  
connected properly to the  
TV ANTENNA input jack on the rear  
PICTURE AUDIO  
Antenna  
TIME  
SET UP PARENTAL  
CATV  
TV  
Auto Scan  
of the system.  
Auto Scan Add CH  
Channel Skip  
Channel No.  
Channel Label  
DTV Signal  
Proceed with auto scan ?  
No  
Yes  
:SELECT  
"ENTER":COMFIRM  
UP/DOWN  
ADJUST "MENU":EXIT  
1. Press the  
/
button to select Yes. Press the  
2. Use the  
press the  
/
button to select Antenna, then  
button to select Air or CATV.  
ENTER button to proceed with the initial setup.  
/
PICTURE AUDIO  
TIME  
SET UP PARENTAL  
TV  
PICTURE AUDIO  
Cable System  
Start to Scan  
TIME  
SET UP PARENTAL  
AUTO  
TV  
RF CH  
Found  
:
:
16  
0
PRESS <MENU> TO EXIT AUTO SCAN  
UP/DOWN  
ADJUST "MENU":EXIT  
3. Use the  
/
button to select Auto Scan, then press the button to enter auto scan menu. Use the  
/
button to select Start to Scan, and press the button to begin scanning (If you selected CATV  
on Step 2, you need to select Cable System before Start to Scan). The system will automatically start  
to scan and preset all available TV channels.  
4. After scanning has finished, the system will return to the first TV channel scanned.  
E - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
Please check and identify the supplied accessories.  
Remote Control ......................................................................................................................... x 1  
“AAA” Batteries (for remote control) ........................................................................................ x 2  
Screws (for base stand) .......................................................................................................... x 4  
GETTING STARTED  
USING THE REMOTE CONTROL  
• Point the remote control at the remote sensor located on the unit.  
• When there is a strong ambient light source, the performance of the infrared remote sensor may be  
degraded, causing unreliable operation.  
• The recommended effective distance for remote operation is about 16 feet (5 meters).  
TO INSTALL BATTERIES  
1. Open the battery door.  
2. Insert 2 “AAA” batteries.  
+
_
_
+
BATTERY REPLACEMENT  
When the batteries become weak, the operating distance of the remote control is greatly reduced and  
you will need to replace the batteries.  
CAUTION:  
Danger of explosion if battery is incorrectly replaced.  
NOTES:  
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage  
caused by battery leakage corrosion.  
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable  
(NICKEL-CADMIUM) batteries.  
• Always remove batteries as soon as they become weak.  
• Weak batteries can leak and severely damage the remote control.  
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.  
WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.  
Many universal remote controls have a “learning” feature. We recommend you use this feature to  
program the remote control.  
For any questions or problems related to programming a universal remote control, you must contact the  
customer service department of the universal remote control manufacturer for assistance, or refer to  
the instructions included with the universal remote control. We cannot offer assistance in programming  
universal remote controls.  
E - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL REFERENCE GUIDE  
REMOTE CONTROL  
6. DISPLAY button  
10  
11  
Press to show that input you are watching  
(TV/AV In/YUV In/PC In).  
1
2
7. VOLUME (- / +) Buttons  
Press to adjust the volume level.  
8. CC Button  
Press to activate the Closed Captioning  
feature. This function only works on  
programs broadcasted with captions.  
9. TV Button  
Press to switch to TV mode.  
10. PICTURE Button  
3
4
5
6
7
12  
13  
14  
Press to select from preset screen  
display settings to match the type of show  
you are watching (Standard/Soft/Movie/  
Personal).  
15  
16  
17  
8
9
11. STANDBY/ ON Button  
Press to turn ON the unit or put it in  
STANDBY (OFF) mode.  
12. LAST CH Button  
Press to switch repeatedly between the  
last two channels displayed.  
13. MENUButton  
Press to display the on-screen TV menu.  
14. MUTE  
Button  
Press to turn off the sound.  
15. MTS Button  
1. FUNCTION Button  
Press to switch between TV/AV In/YUV In/  
PC In.  
2. Number (0 - 9) Buttons  
3. [dot] Button  
Press to enter digital sub-channels (i.e.  
11.3 or 12.7)  
4. EXIT Button  
Press to exit the TV SET UP menu and  
return directly to normal viewing.  
5. CURSOR ( , , , ) Buttons  
Press to highlight selections on a menu  
screen and adjust certain settings.  
ENTERButton  
Press to select between MONO sound,  
STEREO sound and Secondary Audio  
Program (SAP).  
FORMAT Button  
Press to select the picture format (Wide/  
Zoom/Auto/4:3).  
SOUND Button  
Press to select from preset sound  
settings to match the type of show you  
are watching (Standard/Music/Movie/  
Personal).  
16. HD Button  
Press to switch to source connected to YUV  
in (component) inputs.  
17. AV IN Button  
Press to confirm selections on a menu  
screen.  
CH + / CH - Buttons  
Press to switch to source connected to AV  
(composite) inputs.  
Press to change the TV channels.  
E - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL REFERENCE GUIDE  
FRONT AND SIDE VIEWS  
1)  
Button  
Turns the unit on and off.  
2) MENU Button  
Enters the on-screen TV menu.  
3) FUNCTION Button  
Selects TV/AV In/YUV In/PC In.  
4)  
CH Buttons  
Confirms selections on the TV menu  
screen and changes the TV channels.  
5) - VOL + Controls  
Adjusts the volume level.  
6) Color LCD Screen  
7) Remote Sensor  
Receives the remote control signal.  
8) Speaker  
9) Removable Stand  
REAR VIEW  
10) AC Power Cord  
11) VIDEO OUT Jack - AV OUT  
12) AUDIO OUT Jacks (Left/Right) - AV  
OUT  
13) VIDEO IN Jack - AV IN  
14) AUDIO IN Jacks (Left/Right) - AV IN  
15) MONITOR/VGA Jack - PC IN  
16) AUDIO Jack - PC IN  
17) Component VIDEO IN Jacks (Y/PB/  
PR) - YUV IN  
18) AUDIO IN Jacks (Left/Right) - YUV IN  
19) S-VIDEO Jack - AV IN  
20) HEADPHONES Jack  
21) TV Antenna Terminal  
E - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
CONNECTINGA TVANTENNA/ CABLE / SATELLITE  
To view television channels correctly, a signal must be received from one of the following sources:  
- An indoor or outdoor aerial antenna  
- A cable system  
- A satellite system  
Connecting  
Antenna  
a
Digital  
The tuner in this TV receives ATSC  
TV signals from an antenna.  
This digital TV can receive standard  
(SDTV) and high definition (HDTV)  
over the air broadcasts.  
Satellite, cable or TV  
antenna cable to TV  
ANTENNA terminal  
(cable not included)  
Connecting an Analog  
Antenna or Device  
The tuner in this TV receives NTSC  
TV signals, analog cable signals or  
the RF output from a satellite  
receiver, VCR or cable box.  
CONNECTING AN A/V DEVICE  
To connect other equipment such as a VCR, camcorder, satellite system or cable, etc.:  
Connecting a VCR /  
Camcorder / Satellite  
System / Cable  
Connect theAUDIO and S-VIDEO  
cable (not included) as shown.  
ToAUDIO  
IN jacks  
(AV IN)  
Make sure you connect the cable  
from the other equipment (AUDIO  
OUT and S-VIDEO OUT) to this  
unit (AUDIO IN and S-VIDEO IN).  
NOTE:  
To S-VIDEO  
IN jack  
Please refer to the user manual  
for the other equipment for more  
information.  
To S-VIDEO OUT /  
AUDIO OUT jacks  
E - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT  
To connect A/V devices such as a VCR, video game system or camcorder:  
Connecting a VCR / Video Game System / Camcorder  
Connect the AUDIO / VIDEO cable (not included) as shown.  
Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO  
and VIDEO IN).  
NOTE:  
Please refer to the user manual for the other equipment for more information.  
ToAUDIO /  
VIDEO IN  
jacks  
(AV IN)  
ToAUDIO / VIDEO OUT jacks  
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO INPUT  
To connect A/V devices such as a VCR, PVR or camcorder:  
Connecting a VCR / PVR /  
Camcorder  
Connect the AUDIO / VIDEO cable  
(not included) as shown:  
ToAUDIO /  
VIDEO OUT  
jacks  
Make sure you connect the cable  
from the other equipment (AUDIO  
and VIDEO IN) to this unit (AUDIO  
and VIDEO OUT).  
NOTE:  
Please refer to the user manual for  
the other equipment for more  
information.  
ToAUDIO / VIDEO IN jacks  
E - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
CONNECTING A HIGH-DEFINITION (HD) SOURCE  
High-Definition (HD) devices with component video output must be connected to the YUV input.  
Connect the component video cable and audio cable (not included) as shown.  
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT  
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).  
ToAUDIO IN  
jacks  
(YUV IN)  
ToAUDIO  
OUT jacks  
* May require a subscription  
for receiving HD channels.  
Check with your cable/  
satellite service provider for  
details.  
To COMPONENT  
VIDEO IN jacks  
(YUV IN)  
To COMPONENT  
VIDEO OUT jacks  
NOTE:  
When connecting a DVD player to the television, the picture resolution is solely dependent upon the  
resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and  
this unit can support DVD players up to a maximum resolution of 1080i.  
CONNECTING A PC  
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on  
this unit using a monitor cable and audio cable (not included) as shown.  
Make sure you connect the  
cable from the computer (PC  
Connector and AUDIO - PC  
OUT) to this unit (MONITOR /  
VGA and AUDIO - PC IN).  
To AUDIO jack (PC OUT)  
To PC connector  
E - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
CONNECTING AN AUDIO AMPLIFIER  
This connection allows you to use an audio amplifier and external speakers.  
Connect the AUDIO cable (not included) as shown.  
Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT).  
ToAUDIO IN jacks  
ToAUDIO  
OUT jacks  
CONNECTING THE AC POWER CORD  
• Connect the AC power cord into a wall outlet.  
• Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit.  
NOTES:  
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET,  
THEN FULLY INSERT.  
• When the AC power cord is plugged in, the unit is  
not completely disconnected from the main power,  
even when the power is turned off.  
• Be sure the AC power cord is disconnected and all  
functions are off before making connections.  
• Make sure all components are connected correctly.  
• When you are not going to use the unit for a long  
period of time, disconnect the AC power cord.  
• Mains plug is used as the disconnect device. It shall  
remain readily operable and should not be obstructed  
during intended use. To be completely disconnected  
the apparatus from supply mains, the main plug of  
To AC wall outlet  
the apparatus shall be disconnected from the mains  
socket outlet completely.  
USING HEADPHONES  
• Turn down the volume before  
connecting headphones to the unit, then  
adjust the volume to your desired level.  
• When headphones are connected, no  
sound will come from the front  
speakers.  
NOTE:  
Avoid listening to sound at high levels for  
prolonged periods of time. This may be  
harmful to you and may cause hearing  
loss.  
Headphones  
(1/8” [3.5mm]  
diameter plug)  
E - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SETUP  
Note: Some settings on the menu screen may not activate depending on which mode the  
unit is currently in (TV/AV/YUV/PC).  
PICTURE MENU  
1. Press the MENU button.  
PICTURE  
Picture Mode  
Contrast  
Brightness  
Sharpness  
Tint  
AUDIO  
TIME  
SET UP  
PARENTAL  
TV  
Standard  
2. Press the  
3. Use the  
button to enter PICTURE settings.  
or button to select the options (Picture  
63  
44  
38  
0
Mode, Contrast, Brightness, Sharpness, Tint  
or Color). Adjust them using the or button (The  
screen will change to your desired setting).  
Color  
60  
4. Repeat step 3 to adjust other options.  
5. To exit the MAIN MENU and return to the normal  
screen, press the EXIT or MENU button repeatedly.  
UP/DOWN  
ADJUST  
"MENU":EXIT  
Picture Mode: Select from preset screen display settings to match the type of show you are watching  
(Standard, Soft, Movie and Personal). Select Personal mode to recall your custom  
settings on contrast, brightness, sharpness, tint and color.  
Contrast  
: Adjust to sharpen the picture quality. The black portions of the picture become richer in  
darkness and the white become brighter.  
Brightness : Adjust the brightness of the picture. Brighten or darken the whole picture.  
Sharpness : Adjust the sharpness level to improve detail in the picture.  
Tint  
: Adjust the tint of the picture (Toward purple / Toward green).  
: Adjust the color of the picture.  
Color  
AUDIO MENU  
1. Press the MENU button.  
2. Use the  
the button to enter the AUDIO settings.  
3. Use the or button to select the options (Sound  
Mode, Bass, Treble, Balance, Audio Language  
or MTS). Adjust them using the or button.  
4. Repeat step 3 to adjust other options.  
or  
button to select AUDIO, then press  
PICTURE AUDIO  
Sound Mode  
Bass  
TIME  
SET UP PARENTAL  
Standard  
TV  
50  
50  
0
Treble  
Balance  
Audio Language  
MTS  
English  
Stereo  
5. To exit the MAIN MENU and return to the normal  
screen, press the EXIT or MENU button repeatedly.  
Note: Experiment with different sound settings  
until you find the settings you prefer.  
UP/DOWN  
ADJUST "MENU":EXIT  
Sound Mode  
: Select from preset sound settings (Standard, Music, Movie or Personal) to match  
the type of show you are watching. Select Personal mode to recall your custom  
settings on bass, treble and balance.  
Bass  
: Adjust the bass range.  
Treble  
Balance  
: Adjust the treble range.  
: Adjust the balance level toward the left or right speakers.  
Audio Language : Select from English / Spanish / French (available for digital channels if multiple  
audio languages are broadcasted).  
MTS (Multi Channel Television Sound) : Select Stereo / SAP (Secondary Audio Program) / Mono.  
Note:  
The SAP (Secondary Audio Programs) feature allows a TV station to broadcast other information,  
which could be audio in another language.  
E - 12  
PLV36220CS1_12-19.pmd  
12  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SETUP  
TIME MENU  
1. Press the MENU button.  
2. Use the or button to select TIME, then press the  
PICTURE AUDIO  
OSD Duration  
Sleep Timer  
Time Zone  
TIME  
SET UP PARENTAL  
TV  
button to enter the TIME settings.  
15 Sec  
Off  
Eastern  
50  
50  
3. Use the  
or  
button to select the options (OSD  
Duration, Sleep Timer, Time Zone, Day Saving  
Time or Clock). Adjust them using the or button.  
4. Repeat step 3 to adjust other options.  
Day Saving Time  
Clock  
Off  
2007/03/05 04:39PM  
5. To exit the MAIN MENU and return to the normal  
screen, press the EXIT or MENU button repeatedly.  
UP/DOWN  
ADJUST "MENU":EXIT  
OSD (On Screen Display) Duration : Select the length of time the On Screen Menu is displayed: 15  
Sec / 30 Sec / 45 Sec / 60 Sec.  
Sleep Timer  
: Select the length of time before the unit automatically changes to Standby Mode:  
Off -> 5 Minutes -> 10 Minutes -> 15 Minutes -> 30 Minutes -> 60 Minutes -> 90  
Minutes -> 120 Minutes -> Off.  
Time Zone  
: Select the time zone from Eastern / Central / Mountain / Pacific / Alaska / Hawaii.  
Day Saving Time : Select On to activate daylight savings time.  
Clock  
: Displays the current time.  
SET UP MENU  
1. Press the MENU button.  
2. Use the or button to select SET UP, then press the  
button to enter the SET UP settings.  
PICTURE AUDIO  
OSD Language  
Color Mode  
TIME  
SET UP PARENTAL  
English  
TV  
3. Use the  
or  
button to select the options (OSD  
Normal  
Language, Color Mode, PC Set Up, Closed  
Caption or Restore Setting). Adjust them using the  
or button (The screen will change to your desired  
PC Set Up  
Closed Caption  
Restore Setting  
setting); or press the  
settings.  
button to go into the detailed  
4. Press the MENU button to return to the previous menu.  
5. Repeat steps 3 and 4 to adjust other options.  
6. To exit the MAIN MENU and return to the normal screen,  
press the EXIT or MENU button repeatedly.  
UP/DOWN  
ADJUST "MENU":EXIT  
OSD (On Screen Display) Language : Select On-screen menu language from English / French /  
Spanish.  
Color Mode  
: Adjust the three color temperature of the picture. Choose from Normal (balanced),  
Warm (red white), or Cool (blue white) modes.  
Restore Setting : If you reset the TV to the factory settings, all your present settings on PICTURE and  
AUDIO will be erased and replaced by the factory’s default settings.  
E - 13  
PLV36220CS1_12-19.pmd  
13  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SETUP  
PC Set Up (in PC mode only)  
-
-
Resolution : 1680 x 1050 max  
Refresh Frequency : 60Hz max  
PICTURE AUDIO  
H - Pos  
TIME  
SETUP  
50  
50  
V - Pos  
H - Pos : Center the image by moving it left or right.  
V - Pos : Center the image by moving it up or down.  
Clock : Adjusts the display clock to change width of  
the image.  
50  
Clock  
100  
Phase  
Auto adjust  
Phase : Adjusts the image if there is flicker of screen  
letters, color misalignment, or blurring.  
Best Resolution is 1680x1050  
UP/DOWN  
ADJUST "MENU":EXIT  
Closed Caption  
PICTURE AUDIO  
CC Mode  
TIME  
SET UP PARENTAL  
CC on Mute  
CC1  
TV  
Note:  
Analog Closed Caption  
Digital Closed Caption  
Digital Caption Style  
This function only works on ATSC  
programs  
captions.  
Service1  
broadcast  
with  
UP/DOWN  
ADJUST "MENU":EXIT  
CC Mode  
: Select closed caption On, Off or CC on Mute.  
Analog Closed Caption : Select the analog closed caption or turn it off.  
Digital Closed Caption : Select the digital closed caption or turn it off.  
Digital Caption Style  
: Select As Broadcaster to use the default digital caption style of the  
broadcaster. Select Custom to activate the caption style items and set your  
desired detailed settings.  
PARENTALMENU  
Password  
1. Press the MENU button.  
2. Use the  
press the  
PICTURE AUDIO  
Enter Password  
TIME  
SET UP PARENTAL  
TV  
or  
button to select PARENTAL, then  
button to enter the PARENTAL settings.  
The menu locked screen will be displayed.  
3. Enter a 4-digit password. Once entered, the screen  
will enter the Parental menu. The preset password  
is 0000.  
UP/DOWN  
ADJUST "MENU":EXIT  
If you forget the password,  
enter " 8888 " to unlock parental  
control.  
E - 14  
PLV36220CS1_12-19.pmd  
14  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SETUP  
Parental  
1. Use the  
or  
button to select various Parental  
or button, or press  
button to go into the detailed settings.  
PICTURE AUDIO  
Change Password  
Rating Enable  
US  
TIME  
SET UP PARENTAL  
On  
TV  
settings. Adjust them using the  
the  
2. Press the MENU button to return to the previous menu.  
3. Repeat steps 1 - 2 to adjust other options.  
4. To exit the MAIN MENU and return to the normal  
screen, press the EXIT or MENU button repeatedly.  
Canada  
RRT Setting  
Reset RRT  
UP/DOWN  
ADJUST "MENU":EXIT  
Rating Enable: Select On to edit the following parental items. Select Off to disable parental control.  
US  
: Set TV and MPAA ratings.  
Canada  
: Set Canada English and Canada French ratings.  
RRT Setting : Set Rating Region Table.  
Reset RRT  
: Reset Rating Region Table to the default settings.  
TV-Y : Recommended for all children.  
TV-Y7 : Recommended for all children age 7 and above.  
TV-G : General Audience.  
TV-PG : Parental Guidance Suggested.  
TV-14 : Parental Strongly Cautioned.  
TV-MA : Mature Audience Only.  
U.S. TV  
Ratings  
N/A  
G
PG  
: Not rated.  
: GENERALAUDIENCES, Suitable for all ages.  
: PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for  
children.  
U.S.  
MPAA  
Ratings  
PG-13 : PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for  
children under 13.  
R
: RESTRICTED, Under 17 requires accompanying parent or adult guardian for  
viewing in movie theaters.  
NC-17 : No one 17 or under admitted in movie theaters,  
X
: Adults Only.  
E
: Exempt.  
C
: Children.  
C8+  
G
PG  
: Recommended for children age 8 and older.  
: GENERALAUDIENCES, Suitable for all ages.  
: PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for  
children.  
Canadian  
English  
Ratings  
14+  
18+  
: Viewers 14 years and older.  
: Adult Programming.  
E
: Exempt.  
G
: GENERALAUDIENCES, Suitable for all ages.  
Canadian  
French  
Ratings  
8 ans+ : Not recommended for young children.  
13 ans+:  
16 ans+:  
18 ans+:  
Not suitable for children under the age of 13.  
Not suitable for children under the age of 16.  
Adult Programming.  
E - 15  
PLV36220CS1_12-19.pmd  
15  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SETUP  
TV MENU (For TV Mode Only)  
1. Press the MENU button.  
PICTURE AUDIO  
TIME  
SET UP PARENTAL  
Air  
TV  
2. Use the  
or  
button to select TV, then press the  
Antenna  
button to enter the TV settings.  
Auto Scan  
3. Use the  
or  
button to select the options  
Auto Scan Add CH  
Channel Skip  
Channel No.  
Channel Label  
DTV Signal  
(Antenna, Auto Scan, Auto Scan Add CH,  
Channel Skip, Channel No., Channel Label or  
DTV Signal). Adjust them using the  
5-5  
XXX  
or  
button,  
Good  
or press the button to go into the detailed settings.  
4. Press the MENU button to return to the previous  
menu.  
UP/DOWN  
ADJUST "MENU":EXIT  
5. Repeat steps 3 and 4 to adjust other options.  
6. To exit the MAIN MENU and return to the normal  
screen, press the EXIT or MENU button repeatedly.  
Antenna  
: Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite broadcasts, CH  
1-135) mode is available.  
Auto Scan  
: Search for usable stations and store them in memory.  
Auto Scan Add CH : Search for more usable stations and add them in memory. The stations stored  
before are still kept.  
Channel Skip  
Channel No.  
Channel Label  
DTV Signal  
: Skip weak channels and the channels you do not like.  
: Select a different TV channel.  
: Display and edit the channel label.  
: Display the signal strength (for digital TV channels only).  
Channel Skip  
1. Use the  
or  
button to select a channel (Press  
PICTURE AUDIO  
TIME  
SET UP PARENTAL  
TV  
the  
button to select the last channel of the page;  
No.  
2
Program Name  
XXX  
Skip  
On  
On  
Off  
Off  
Off  
On  
Off  
press again to go to the next page. Press the  
button to select the first channel of the page; press  
again to go to the previous page).  
3
XXXX  
XX  
4
2. Press the ENTER button to shift between On / Off  
(Select On to skip the selected channel. The channel  
5
XX  
5-1  
6
XXXX  
XXXXX  
XXXX  
will not appear when you press the CH  
Button).  
/ CH  
7
"ENTER":SELECT "MENU":EXIT  
Channel Label  
You can edit a label for each channel.  
PICTURE AUDIO  
TIME  
SET UP PARENTAL  
TV  
1. Use the  
Use the  
or  
or  
button to select the number or letter.  
button to move and edit the next  
character. Press the ENTER button to confirm.  
2. After editing, the Channel and Channel Label will be  
displayed on the screen when you press the  
DISPLAY button.  
X
EDIT  
SELECT "MENU":EXIT  
E - 16  
PLV36220CS1_12-19.pmd  
16  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
CLEANING THE UNIT  
• Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit.  
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has  
been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a dry  
cloth.  
• Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed  
air to remove dust.  
TROUBLESHOOTING GUIDE  
SYMPTOM  
CAUSE (AND REMEDY)  
No power.  
• Make sure the AC power cord is connected.  
• The unit is not turned on.  
The remote does not  
function.  
• Remove any obstacles between the remote and the unit.  
• Use the remote near the unit.  
• Point the remote at the remote sensor on the unit.  
• Replace the batteries in the remote with new ones.  
TV  
Bad Picture (snow,  
• Check the location of the antenna and adjust it if necessary.  
• Make sure the antenna cable is firmly connected.  
• Make sure all input cables are firmly connected.  
multiple  
images,  
distortion, blurry)  
Black and white  
picture.  
• Check the PICTURE MENU within the TV SETUP MENU.  
• Check to make sure the program you are watching is broadcast in Color  
and not black and white.  
No picture or sound.  
• Make sure the unit is plugged in and turned on.  
• Make sure TV mode is selected.  
• Try a new channel to check for possible station trouble.  
• Make sure the antenna is connected properly.  
• Increase the volume.  
• Make sure the antenna or audio video source device is working properly.  
• Make sure all cables are firmly connected.  
• Check for local interference.  
Colored patches of  
picture.  
• Make sure there are no unshielded electrical devices nearby that are causing  
interference.  
• Turn the unit off for 30 minutes, then try it again.  
E - 17  
PLV36220CS1_12-19.pmd  
17  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unit : INCH  
PLV36220CS1_12-19.pmd  
18  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the  
original consumer purchaser and is limited to non-commercial use of the product.  
Ninety (90) Day Parts & Labor Warranty  
VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship  
for a period of ninety (90) days from the date of their original retail purchase. If the unit fails to conform to this  
warranty, we will service the product using new or refurbished parts and products, at VENTURER’s sole discretion.  
During a period of ninety (90) days from the effective warranty date, VENTURER will provide, when needed, service  
labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States,  
you must first call our Customer Support Center at (800) 252-6123, during the hours listed in the box below. The  
determination of service will be made by VENTURER Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO  
VENTURER WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or  
products will be used for repairs by VENTURER at its designated Service Center for ninety (90) days from the  
effective warranty date. Such replacement parts or products are warranted for an additional ninety (90) days from the  
date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time  
Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation  
charges to the service facility.  
Packaging and Shipping Instruction  
When you send the product to the VENTURER service facility you must use the original carton box and packing  
material or an equivalent as designated by VENTURER.  
LIMITED WARRANTY  
Your Responsibility  
(1) You must retain the original sale receipt to provide proof of purchase.  
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.  
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which  
have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or  
maintenance, or use in violation of instructions provided with the product, or to product which has been altered or  
modified without authorization of VENTURER, or to products or parts thereof which have had the serial number  
removed or changed.  
Out of Warranty  
In the event your product requires repair after the limited warranty period has expired, please contact  
our Customer Support Center at 1-800-252-6123 or www.venturer.com.  
Hours: Monday–Thursday: 9–7, Friday: 9–5, Saturday: 9–12 EST.  
Important:  
You are responsible for any transportation, shipping or insurance relative to the return of product to our  
Product Returns Center.  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular  
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any  
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,  
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of  
any parts. In no event shall VENTURER be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of  
VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby  
limited to ninety (90) days from the date of purchase. This limitation does not apply to implied warranties arising under  
state law.  
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.  
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the  
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.  
Important: Also keep your “Bill of Sale” as proof of purchase.  
Model no. ..............................................  
Product name ...............................................................  
Type of set ........................................................................................................................................  
Serial no. ................................................  
Date purchased .....................................  
Invoice no. .....................................................................  
Dealer name .................................................................  
For more information on other products and services, please visit our web site at www.venturer.com  
© 2007 VENTURER Electronics Inc.  
Printed in China  
811-362291W060  
PLV36220CS1_12-19.pmd  
19  
10/24/2007, 7:47 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

THB Bury GPS Receiver Naviflash 1021 User Manual
Timex Clock Radio timex alarm clock radio User Manual
Toastmaster Toaster T80BC User Manual
Toshiba Cash Register MA 1700 User Manual
TP Link Network Card TL WN851ND User Manual
Tripp Lite Network Cables 730909 User Manual
Tripp Lite Switch B064 016 User Manual
Tripp Lite TV Cables B078001USB User Manual
Vision Fitness Home Gym E3100 3200 User Manual
Vizio Flat Panel Television D24h C1 User Manual