PLV16198
19” Digital LCD TV
INSTRUCTION MANUAL
Need more Help?
DO NOT RETURN THIS PRODUCT TO THE STORE
Please visit online help at
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
PLACEMENT INFORMATION
• Do not use this unit in places that are extremely
hot, cold, dusty or humid.
• Do not restrict the airflow of this unit by placing
it somewhere with poor air flow, by covering it
with a cloth, by placing it on bedding or carpeting.
SAFETY INFORMATION
WARNING : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
• When connecting or disconnecting the AC
power cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a
long period of time, disconnect the AC power
cord.
CONDENSATION INFORMATION
• When left in a heated room where it is warm
and damp, water droplets or condensation may
form inside the equipment. When there is
condensation inside the unit, the unit may not
function normally. Let the unit stand for 1-2 hours
before turning the power on or gradually heat
the room and let the unit dry before use.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
RATING PLATE LOCATION
The rating plate is located on the rear of the unit.
FCC STATEMENTS
The symbol for Class II
(Double Insulation)
NOTE: This unit has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This unit
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communication. However,
there is not guarantee that interference will not
occur in a particular installation. If this unit does
cause harmful interference to radio or television
reception, which can be determined by turning the
unit off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
CAUTION:
• DANGER OF EXPLOSION IF BATTERY IS
INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENTTYPE.
• TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
• USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
- Reorient or relocate the receiving antenna.
- Increase the separation between the unit and
receiver.
- Connect the unit into a wall outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
WARNING :
• TO PREVENT FIRE OR SHOCK HAZARD, DO
NOTEXPOSETHISUNITTORAINORMOISTURE.
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS
ON OR NEAR THIS UNIT.
• SHOULDANYTROUBLE OCCUR, DISCONNECT
THEAC POWER CORDAND REFER SERVICING
TOAQUALIFIEDTECHNICIAN.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user authority to
operate the unit.
E - 1
PLV16198S2_01-11.pmd
1
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings.
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
11) Only use attachments / accessories
specified by the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified
by
the
Install
in
accordance
with
the
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving the cart
/ apparatus combination to avoid injury
from tip-over.
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (Including
amplifiers) that produce heat.
9) Do not defect the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
13) Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as the power cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
plug has two blades and
a
third
grounding prong. The wide blade or the
third prong is provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
TABLE OF CONTENTS
Connecting a High-Definition (HD) Source
..................................................................... 10
SAFETY PRECAUTIONS ................................ 1
IMPORTANT SAFETY INSTRUCTIONS
............................................................................. 2
Connecting a PC ......................................... 10
Connecting anAudioAmplifier .................... 11
Connecting the AC Power Cord ................. 11
TABLE OF CONTENTS ................................... 2
QUICK INSTALLATION ...............................3-4
ACCESSORIES ................................................ 5
GETTING STARTED ......................................... 5
USING HEADPHONES ................................... 11
TV SETUP ................................................ 12-16
Picture Menu ............................................... 12
Audio Menu ............................................... 12
TIME Menu ................................................... 13
Set Up Menu ........................................ 13-14
Parental Menu ..................................... 14-15
TV Menu ...................................................... 16
REMOTE CONTROL REFERENCE GUIDE
............................................................................. 6
CONTROL REFERENCE GUIDE ..................... 7
CONNECTIONS ........................................... 8-11
Connecting a TV Antenna / Cable / Satellite
...................................................................... 8
MAINTENANCE ............................................... 17
TROUBLESHOOTING GUIDE ....................... 17
Connecting an A / V Device ........................ 8
Connecting Devices with a Composite (Yellow
RCA-Type) Video Output ............................ 9
Connecting Devices with a Composite (Yellow
RCA-Type) Video Input ............................... 9
E - 2
PLV16198S2_01-11.pmd
2
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK INSTALLATION
ATTACHING THE BASE STAND
• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
WARNING: The LCD display is very fragile and
must be protected at all times when attaching
the base stand. Be sure that nothing hard or
sharp, or anything that could scratch or damage
the LCD display, comes in contact with it. Do
NOT place pressure on the front of the unit at
any time because the screen could crack.
The Base Stand
CAUTIONS:
• Attach the base stand in the correct direction.
• Incorrect installation of the stand may result
in the unit falling over.
• Be sure to follow the instructions.
1. Confirm 4 screws (silver screws x2 & black
screws x2) are supplied with the unit.
2. Lay the unit down on a flat surface, so the
Silver
screws
(x2)
backside is facing up, making sure to place
a soft cushioned material (such as a pillow
or thick piece of foam) beneath the screen.
3. Attach the BASE STAND to the opening on
the rear of the unit.
Black
screw
(x1)
Black
screw
(x1)
4. Insert and tighten the four screws (supplied)
into the holes as shown below.
Note: To detach the base stand, perform the
steps in reverse order.
Soft cushion
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16” x 3 15/
16” (100mm x 100mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit
according to the directions included with the mounting kit.
3 15/16”
Four
mounting
holes
E - 3
PLV16198S2_01-11.pmd
3
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK INSTALLATION
When you turn on your television set for the
first time, be sure to place it on a solid stable
surface. To avoid danger, do not expose the
TV to water, or a heat source (e.g. lamp,
candle, radiator). Do not obstruct the
ventilation grid at the rear and be sure to
leave sufficient gaps around the unit as
shown.
TURNING ON THE UNIT FOR THE FIRST TIME
The first time you turn on the unit, the unit will enter Setup mode. You can easily follow the prompt
message on the screen to complete basic TV settings.
Make sure the RF aerial has been
connected properly to the
TV ANTENNA input jack on the rear
PICTURE AUDIO
Antenna
TIME
SET UP PARENTAL
CATV
TV
Auto Scan
of the system.
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
DTV Signal
Proceed with auto scan ?
No
Yes
:SELECT
"ENTER":COMFIRM
UP/DOWN
ADJUST "MENU":EXIT
1. Press the
/
button to select Yes. Press the
2. Use the
press the
/
button to select Antenna, then
button to select Air or CATV.
ENTER button to proceed with the initial setup.
/
PICTURE AUDIO
TIME
SET UP PARENTAL
TV
PICTURE AUDIO
Cable System
Start to Scan
TIME
SET UP PARENTAL
AUTO
TV
RF CH
Found
:
:
16
0
PRESS <MENU> TO EXIT AUTO SCAN
UP/DOWN
ADJUST "MENU":EXIT
3. Use the
/
button to select Auto Scan, then press the button to enter auto scan menu. Use the
/
button to select Start to Scan, and press the button to begin scanning (If you selected CATV
on Step 2, you need to select Cable System before Start to Scan). The system will automatically start
to scan and preset all available TV channels.
4. After scanning has finished, the system will return to the first TV channel scanned.
E - 4
PLV16198S2_01-11.pmd
4
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Please check and identify the supplied accessories.
Remote Control ......................................................................................................................... x 1
“AAA” Batteries (for remote control) ........................................................................................ x 2
Screws (for base stand) .......................................................................................................... x 4
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert 2 “AAA” batteries.
+
_
_
+
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly reduced and
you will need to replace the batteries.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
NOTES:
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control.
WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
Many universal remote controls have a “learning” feature. We recommend you use this feature to
program the remote control.
For any questions or problems related to programming a universal remote control, you must contact the
customer service department of the universal remote control manufacturer for assistance, or refer to
the instructions included with the universal remote control. We cannot offer assistance in programming
universal remote controls.
E - 5
PLV16198S2_01-11.pmd
5
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL REFERENCE GUIDE
REMOTE CONTROL
6. DISPLAY button
10
11
Press to show that input you are watching
(TV/AV In/YUV In/PC In).
1
2
7. VOLUME (- / +) Buttons
Press to adjust the volume level.
8. CC Button
Press to activate the Closed Captioning
feature. This function only works on
programs broadcasted with captions.
9. TV Button
Press to switch to TV mode.
10. PICTURE Button
3
4
5
6
7
12
13
14
Press to select from preset screen
display settings to match the type of show
you are watching (Standard/Soft/Movie/
Personal).
15
16
17
8
9
11. STANDBY/ ON Button
Press to turn ON the unit or put it in
STANDBY (OFF) mode.
12. LAST CH Button
Press to switch repeatedly between the
last two channels displayed.
13. MENUButton
Press to display the on-screen TV menu.
14. MUTE
Button
Press to turn off the sound.
15. MTS Button
1. FUNCTION Button
Press to switch between TV/AV In/YUV In/
PC In.
2. Number (0 - 9) Buttons
3. [dot] Button
Press to enter digital sub-channels (i.e.
11.3 or 12.7)
4. EXIT Button
Press to exit the TV SET UP menu and
return directly to normal viewing.
5. CURSOR ( , , , ) Buttons
Press to highlight selections on a menu
screen and adjust certain settings.
ENTERButton
Press to select between MONO sound,
STEREO sound and Secondary Audio
Program (SAP).
FORMAT Button
Press to select the picture format (Full/
Zoom/Auto/4:3).
SOUND Button
Press to select from preset sound
settings to match the type of show you
are watching (Standard/Music/Movie/
Personal).
16. HD Button
Press to switch to source connected to YUV
in (component) inputs.
17. AV IN Button
Press to confirm selections on a menu
screen.
CH + / CH - Buttons
Press to switch to source connected to AV
(composite) inputs.
Press to change the TV channels.
E - 6
PLV16198S2_01-11.pmd
6
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL REFERENCE GUIDE
FRONT AND SIDE VIEWS
8
9
1
2
3
4
5
6
7
10
1. Left Speaker
6. - VOL + Controls
Adjusts the volume level.
7. Remote Sensor
2.
Button
Turns the unit on and off.
Receives the remote control signal.
Standby Indicator
8. Right Speaker
3. MENU Button
Enters the on-screen TV menu.
4. FUNCTION Button
9. Color LCD Screen
10. Removable Stand
Selects TV/AV In/YUV In/PC In.
CH Buttons
5.
Confirms selections on the TV menu
screen and changes the TV channels.
REAR VIEW
11) AC Power Cord
12) VIDEO OUT Jack - AV OUT
13) AUDIO OUT Jacks (Left/
Right) - AV OUT
14) VIDEO IN Jack - AV IN
15) AUDIO IN Jacks (Left/Right)
- AV IN
16) MONITOR/VGA Jack - PC IN
17) AUDIO Jack - PC IN
18) Component VIDEO IN Jacks
(Y/PB/PR) - YUV IN
19) AUDIO IN Jacks (Left/Right)
- YUV IN
20) S-VIDEO Jack - AV IN
21) HEADPHONES Jack
22) TV Antenna Terminal
E - 7
PLV16198S2_01-11.pmd
7
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTINGA TVANTENNA/ CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Connecting
Antenna
a
Digital
The tuner in this TV receives ATSC
TV signals from an antenna.
This digital TV can receive standard
(SDTV) and high definition (HDTV)
over the air broadcasts.
Satellite, cable or TV
antenna cable to TV
ANTENNA terminal
(cable not included)
Connecting an Analog
Antenna or Device
The tuner in this TV receives NTSC
TV signals, analog cable signals or
the RF output from a satellite
receiver, VCR or cable box.
CONNECTING AN A/V DEVICE
To connect other equipment such as a VCR, camcorder, satellite system or cable, etc.:
Connecting a VCR /
Camcorder / Satellite
System / Cable
Connect theAUDIO and S-VIDEO
cable (not included) as shown.
ToAUDIO
IN jacks
(AV IN)
Make sure you connect the cable
from the other equipment (AUDIO
OUT and S-VIDEO OUT) to this
unit (AUDIO IN and S-VIDEO IN).
NOTE:
To S-VIDEO
IN jack
Please refer to the user manual
for the other equipment for more
information.
To S-VIDEO OUT /
AUDIO OUT jacks
E - 8
PLV16198S2_01-11.pmd
8
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT
To connect A/V devices such as a VCR, video game system or camcorder:
Connecting a VCR / Video Game System / Camcorder
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO
and VIDEO IN).
NOTE:
Please refer to the user manual for the other equipment for more information.
ToAUDIO /
VIDEO IN
jacks
(AV IN)
ToAUDIO / VIDEO OUT jacks
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO INPUT
To connect A/V devices such as a VCR, PVR or camcorder:
Connecting a VCR / PVR /
Camcorder
Connect the AUDIO / VIDEO cable
(not included) as shown:
ToAUDIO /
VIDEO OUT
jacks
Make sure you connect the cable
from the other equipment (AUDIO
and VIDEO IN) to this unit (AUDIO
and VIDEO OUT).
NOTE:
Please refer to the user manual for
the other equipment for more
information.
ToAUDIO / VIDEO IN jacks
E - 9
PLV16198S2_01-11.pmd
9
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE
High-Definition (HD) devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).
ToAUDIO IN
jacks
(YUV IN)
ToAUDIO
OUT jacks
* May require a subscription
for receiving HD channels.
Check with your cable/
satellite service provider for
details.
To COMPONENT
VIDEO IN jacks
(YUV IN)
To COMPONENT
VIDEO OUT jacks
NOTE:
When connecting a DVD player to the television, the picture resolution is solely dependent upon the
resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and
this unit can support DVD players up to a maximum resolution of 1080i.
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on
this unit using a monitor cable and audio cable (not included) as shown.
Make sure you connect the
cable from the computer (PC
Connector and AUDIO - PC
OUT) to this unit (MONITOR /
VGA and AUDIO - PC IN).
To AUDIO jack (PC OUT)
To PC connector
E - 10
PLV16198S2_01-11.pmd
10
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not included) as shown.
Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT).
ToAUDIO IN jacks
ToAUDIO
OUT jacks
CONNECTING THE AC POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit.
NOTES:
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET,
THEN FULLY INSERT.
• When theAC power cord is plugged
in, the unit is not completely
disconnected from the main power,
even when the power is turned
off.
• Be sure the AC power cord is
disconnected and all functions are
off before making connections.
• Make sure all components are
connected correctly.
• When you are not going to use the
unit for a long period of time,
disconnect the AC power cord.
To AC wall outlet
USING HEADPHONES
• Turn down the volume before
connecting headphones to the unit,
then adjust the volume to your
desired level.
• When headphones are connected,
no sound will come from the front
speakers.
NOTE:
Avoid listening to sound at high levels
for prolonged periods of time. This
may be harmful to you and may
cause hearing loss.
Headphones
(1/8” [3.5mm]
diameter plug)
E - 11
PLV16198S2_01-11.pmd
11
9/7/2007, 12:30 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
Note: Some settings on the menu screen may not activate depending on which mode the
unit is currently in (TV/AV/YUV/PC).
PICTURE MENU
1. Press the TV MENU button.
PICTURE
Picture Mode
Contrast
Brightness
Sharpness
Tint
AUDIO
TIME
SET UP
PARENTAL
TV
Standard
2. Press the
3. Use the
button to enter PICTURE settings.
or button to select the options (Picture
63
44
38
0
Mode, Contrast, Brightness, Sharpness, Tint
or Color). Adjust them using the or button (The
screen will change to your desired setting).
4. Repeat step 3 to adjust other options.
5. To exit the MAIN MENU and return to the normal
screen, press the EXIT or TV MENU button
repeatedly.
Color
60
UP/DOWN
ADJUST
"MENU":EXIT
Picture Mode: Select from preset screen display settings to match the type of show you are watching
(Standard, Soft, Movie and Personal). Select Personal mode to recall your custom
settings on contrast, brightness, sharpness, tint and color.
Contrast
: Adjust to sharpen the picture quality. The black portions of the picture become richer in
darkness and the white become brighter.
Brightness : Adjust the brightness of the picture. Brighten or darken the whole picture.
Sharpness : Adjust the sharpness level to improve detail in the picture.
Tint
: Adjust the tint of the picture (Toward purple / Toward green).
: Adjust the color of the picture.
Color
AUDIO MENU
1. Press the TV MENU button.
2. Use the
the button to enter the AUDIO settings.
3. Use the or button to select the options (Sound
Mode, Bass, Treble Balance, Audio Language
or MTS). Adjust them using the or button.
4. Repeat step 3 to adjust other options.
or
button to select AUDIO, then press
PICTURE AUDIO
Sound Mode
Bass
TIME
SET UP PARENTAL
Standard
TV
50
50
0
Treble
Balance
Audio Language
MTS
English
Stereo
5. To exit the MAIN MENU and return to the normal
screen, press the EXIT or TV MENU button
Note: Experiment with different sound settings
until you find the settings you prefer.
UP/DOWN
ADJUST "MENU":EXIT
Sound Mode
: Select from preset sound settings (Standard, Music, Movie or Personal) to match
the type of show you are watching. Select Personal mode to recall your custom
settings on bass, treble and balance.
Bass
: Adjust the bass range.
Treble
Balance
: Adjust the treble range.
: Adjust the balance level toward the left or right speakers.
Audio Language : Select from English / Spanish / French (available for digital channels if multiple
audio languages are broadcasted).
MTS (Multi Channel Television Sound) : Select Stereo / SAP (Secondary Audio Program) / Mono.
Note:
The SAP (Secondary Audio Programs) feature allows a TV station to broadcast other information,
which could be audio in another language.
E - 12
Untitled-3
12
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
TIME MENU
1. Press the TV MENU button.
2. Use the or button to select TIME, then press the
PICTURE AUDIO
OSD Duration
Sleep Timer
Time Zone
TIME
SET UP PARENTAL
TV
button to enter the TIME settings.
15 Sec
Off
Eastern
50
50
3. Use the
Duration, Sleep Timer, Time Zone or Day Saving
Time). Adjust them using the or button.
4. Repeat step 3 to adjust other options.
or
button to select the options (OSD
Day Saving Time
Clock
Off
2007/03/05 04:39PM
5. To exit the MAIN MENU and return to the normal
screen, press the EXIT or TV MENU button
repeatedly.
UP/DOWN
ADJUST "MENU":EXIT
OSD (On Screen Display) Duration : Select the length of time the On Screen Menu is displayed: 15
Sec / 30 Sec / 45 Sec / 60 Sec.
Sleep Timer
: Select the length of time before the unit automatically changes to Standby Mode:
Off -> 5 Minutes -> 10 Minutes -> 15 Minutes -> 30 Minutes -> 60 Minutes -> 90
Minutes -> 120 Minutes -> Off.
Time Zone
: Select the time zone from Eastern / Central / Mountain / Pacific / Alaska / Hawaii.
Day Saving Time : Select On to activate daylight savings time.
Clock
: Displays the current time.
SET UP MENU
1. Press the TV MENU button.
2. Use the or button to select SET UP, then press the
button to enter the SET UP settings.
PICTURE AUDIO
OSD Language
Color Mode
TIME
SET UP PARENTAL
English
TV
3. Use the
or
button to select the options (OSD
Normal
Language, Color Mode, PC Set Up, Closed
Caption or Restore Setting). Adjust them using the
or button (The screen will change to your desired
PC Set Up
Closed Caption
Restore Setting
setting); or press the
settings.
button to go into the detailed
4. Press the MENU button to return to the previous menu.
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal screen,
press the EXIT or TV MENU button repeatedly.
UP/DOWN
ADJUST "MENU":EXIT
OSD (On Screen Display) Language : Select On-screen menu language from English / French /
Spanish.
Color Mode
: Adjust the three color temperature of the picture. Choose from Normal (balanced),
Warm (red white), or Cool (blue white) modes.
Restore Setting : If you reset the TV to the factory settings, all your present settings on PICTURE and
AUDIO will be erased and replaced by the factory’s default settings.
E - 13
Untitled-3
13
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
PC Set Up (in PC mode only)
-
-
Resolution : 1280 x 1024 max
Refresh Frequency : 60Hz max
PICTURE AUDIO
H - Pos
TIME
SETUP
50
50
H - Pos : Center the image by moving it left or right.
V - Pos : Center the image by moving it up or down.
Clock : Adjusts the display clock to change width of
the image.
V - Pos
50
Clock
100
Phase
Auto
Phase : Adjusts the image if there is flicker of screen
letters, color misalignment, or blurring.
Best Resolution is 1280x1024
UP/DOWN
ADJUST "MENU":EXIT
Closed Caption
PICTURE AUDIO
CC Mode
TIME
SET UP PARENTAL
CC on Mute
CC1
TV
Note:
Analog Closed Caption
Digital Closed Caption
Digital Caption Style
This function only works on ATSC
programs
captions.
Service1
broadcast
with
UP/DOWN
ADJUST "MENU":EXIT
CC Mode
: Select closed caption On, Off or CC on Mute.
Analog Closed Caption : Select the analog closed caption or turn it off.
Digital Closed Caption : Select the digital closed caption or turn it off.
Digital Caption Style
: Select As Broadcaster to use the default digital caption style of the
broadcaster. Select Custom to activate the caption style items and set your
desired detailed settings.
PARENTALMENU
Password
1. Press the TV MENU button.
2. Use the
press the
PICTURE AUDIO
Enter Password
TIME
SET UP PARENTAL
TV
or
button to select PARENTAL, then
button to enter the PARENTAL settings.
The menu locked screen will be displayed.
3. Enter a 4-digit password. Once entered, the screen
will enter the Parental menu. The preset password
is 0000.
UP/DOWN
ADJUST "MENU":EXIT
If you forget the password,
enter " 8888 " to unlock parental
control.
E - 14
Untitled-3
14
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
Parental
1. Use the
or
button to select various Parental
or button, or press
button to go into the detailed settings.
PICTURE AUDIO
Change Password
Rating Enable
US
TIME
SET UP PARENTAL
On
TV
settings. Adjust them using the
the
2. Press the TV MENU button to return to the previous
menu.
Canada
3. Repeat steps 1 - 2 to adjust other options.
4. To exit the MAIN MENU and return to the normal
screen, press the EXIT or TV MENU button repeatedly.
RRT Setting
Reset RRT
UP/DOWN
ADJUST "MENU":EXIT
Rating Enable: Select On to edit the following parental items. Select Off to disable parental control.
US
: Set TV and MPAA ratings.
Canada
: Set Canada English and Canada French ratings.
RRT Setting : Set Rating Region Table.
Reset RRT
: Reset Rating Region Table to the default settings.
TV-Y : Recommended for all children.
TV-Y7 : Recommended for all children age 7 and above.
TV-G : General Audience.
TV-PG : Parental Guidance Suggested.
TV-14 : Parental Strongly Cautioned.
TV-MA : Mature Audience Only.
U.S. TV
Ratings
N/A
G
PG
: Not rated.
: GENERALAUDIENCES, Suitable for all ages.
: PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for
children.
U.S.
MPAA
Ratings
PG-13 : PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for
children under 13.
R
: RESTRICTED, Under 17 requires accompanying parent or adult guardian for
viewing in movie theaters.
NC-17 : No one 17 or under admitted in movie theaters,
X
: Adults Only.
E
: Exempt.
C
: Children.
C8+
G
PG
: Recommended for children age 8 and older.
: GENERALAUDIENCES, Suitable for all ages.
: PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for
children.
Canadian
English
Ratings
14+
18+
: Viewers 14 years and older.
: Adult Programming.
E
: Exempt.
G
: GENERALAUDIENCES, Suitable for all ages.
Canadian
French
Ratings
8 ans+ : Not recommended for young children.
13 ans+:
16 ans+:
18 ans+:
Not suitable for children under the age of 13.
Not suitable for children under the age of 16.
Adult Programming.
E - 15
Untitled-3
15
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
TV MENU (For TV Mode Only)
1. Press the TV MENU button.
PICTURE AUDIO
TIME
SET UP PARENTAL
Air
TV
2. Use the
or
button to select TV, then press the
Antenna
button to enter the TV settings.
Auto Scan
3. Use the
or
button to select the options
Auto Scan Add CH
Channel Skip
Channel No.
Channel Label
DTV Signal
(Antenna, Auto Scan, Auto Scan Add CH,
Channel Skip, Channel No. Channel Label or
DTV Signal). Adjust them using the
5-5
XXX
or
button,
Good
or press the button to go into the detailed settings.
4. Press the TV MENU button to return to the previous
menu.
UP/DOWN
ADJUST "MENU":EXIT
5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal
screen, press the EXIT or TV MENU button
repeatedly.
Antenna
: Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite broadcasts, CH
1-135) mode is available.
Auto Scan
: Search for usable stations and store them in memory.
Auto Scan Add CH : Search for more usable stations and add them in memory. The stations stored
before are still kept.
Channel Skip
Channel No.
Channel Label
DTV Signal
: Skip weak channels and the channels you do not like.
: Select a different TV channel.
: Display and edit the channel label.
: Display the signal strength (for digital TV channels only).
Channel Skip
1. Use the
or
button to select a channel (Press
PICTURE AUDIO
TIME
SET UP PARENTAL
TV
the
button to select the last channel of the page;
No.
2
Program Name
XXX
Skip
On
On
Off
Off
Off
On
Off
press again to go to the next page. Press the
button to select the first channel of the page; press
again to go to the previous page).
3
XXXX
XX
4
2. Press the ENTER button to shift between On / Off
(Select On to skip the selected channel. The channel
5
XX
5-1
6
XXXX
XXXXX
XXXX
will not appear when you press the CH
Button).
/ CH
7
"ENTER":SELECT "MENU":EXIT
Channel Label
You can edit a label for each channel.
PICTURE AUDIO
TIME
SET UP PARENTAL
TV
1. Use the
Use the
or
or
button to select the number or letter.
button to move and edit the next
character. Press the ENTER button to confirm.
2. After editing, the Channel and Channel Label will be
displayed on the screen when you press the
DISPLAY button.
X
EDIT
SELECT "MENU":EXIT
E - 16
Untitled-3
16
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has
been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a dry
cloth.
• Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed
air to remove dust.
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE (AND REMEDY)
No power.
• Make sure the AC power cord is connected.
• The unit is not turned on.
The remote does not
function.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new ones.
TV
Bad Picture (snow,
• Check the location of the antenna and adjust it if necessary.
• Make sure the antenna cable is firmly connected.
• Make sure all input cables are firmly connected.
multiple
images,
distortion, blurry)
Black and white
picture.
• Check the PICTURE MENU within the TV SETUP MENU.
• Check to make sure the program you are watching is broadcast in Color
and not black and white.
No picture or sound.
• Make sure the unit is plugged in and turned on.
• Make sure TV mode is selected.
• Try a new channel to check for possible station trouble.
• Make sure the antenna is connected properly.
• Increase the volume.
• Make sure the antenna or audio video source device is working properly.
• Make sure all cables are firmly connected.
• Check for local interference.
Colored patches of
picture.
• Make sure there are no unshielded electrical devices nearby that are causing
interference.
• Turn the unit off for 30 minutes, then try it again.
E - 17
Untitled-3
17
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit : INCH
Untitled-3
18
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the
original consumer purchaser and is limited to non-commercial use of the product.
Ninety (90) Day Parts & Labor Warranty
VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship
for a period of ninety (90) days from the date of their original retail purchase. If the unit fails to conform to this
warranty, we will service the product using new or refurbished parts and products, at VENTURER’s sole discretion.
During a period of ninety (90) days from the effective warranty date, VENTURER will provide, when needed, service
labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States,
you must first call our Customer Support Center at (800) 252-6123, during the hours listed in the box below. The
determination of service will be made by VENTURER Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO
VENTURER WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or
products will be used for repairs by VENTURER at its designated Service Center for ninety (90) days from the
effective warranty date. Such replacement parts or products are warranted for an additional ninety (90) days from the
date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time
Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation
charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the VENTURER service facility you must use the original carton box and packing
material or an equivalent as designated by VENTURER.
LIMITED WARRANTY
Your Responsibility
(1) You must retain the original sale receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which
have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or
maintenance, or use in violation of instructions provided with the product, or to product which has been altered or
modified without authorization of VENTURER, or to products or parts thereof which have had the serial number
removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired, please contact
Hours: Monday–Thursday: 9–7, Friday: 9–5, Saturday: 9–12 EST.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of product to our
Product Returns Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of
any parts. In no event shall VENTURER be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of
VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby
limited to ninety (90) days from the date of purchase. This limitation does not apply to implied warranties arising under
state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
Important: Also keep your “Bill of Sale” as proof of purchase.
Model no. ..............................................
Product name ...............................................................
Type of set ........................................................................................................................................
Serial no. ................................................
Date purchased .....................................
Invoice no. .....................................................................
Dealer name .................................................................
For more information on other products and services, please visit our web site at www.venturer.com
© 2007 VENTURER Electronics Inc.
Printed in China
811-P16191W020
Untitled-3
19
9/7/2007, 12:31 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|