PLV16151S1 IB Cover
Size: 148 X 210 MM
15” LCD TV
PLV1615S
Owner’s Manual
811-161S91WXXX
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
The lightning flash with an arrowhead
within a triangle alerts you to uninsulated
dangerous voltage within the product's
enclosure that could cause an electric
shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ÉLECTRIQUE NE
AVIS
PAS OUVRIR
The exclamation point within a triangle
alerts you to the presence of important
operating, maintenance and servicing
instructions in this user’s manual.
* SEE REAR OF UNIT FOR GRAPHIC SYMBOLS *
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
CAUTION: DANGER OF EXPLOSION IF BATTERY
IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE. DO NOT PLACE OBJECTS FILLED
WITH LIQUIDS ON OR NEAR THIS UNIT.
The symbol for Class II
(Double lnsulation)
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, used in accordance with
theinstructions,maycauseharmfulinterference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
causeharmful interferencetoradioortelevision
reception, which can be determined by turning
the equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
PLACEMENT INFORMATION
• Do not use this unit in places which are
extremely hot, cold, dusty, or humid.
• Do not restrict the air flow of this unit by
placing it somewhere with poor air flow, by
covering it with a cloth, or by placing it on
bedding or carpeting.
SAFETY INFORMATION
• When connecting or disconnecting the AC
cord, grip the plug and not the cord itself.
Pulling the cord may damage it and create a
hazard.
• When you are not going to use the unit for a
long period of time, disconnect the AC cord.
CONDENSATION INFORMATION
• When left in a heated room where it is warm
and damp, water droplets or condensation
may form inside the unit. When there is
condensation inside the unit, the unit may
not function normally. Let the unit stand for
1-2 hours before turning the power on, or
gradually heat the room and let the unit dry
before use.
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuitdifferentfromthattowhichthereceiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Shielded cables must be used with this unit to
ensure compliance with the Class FCC limits.
WARNING: Changes or modifications to
this unit not expressly approved by the
party responsible for compliance could
void the user authority to operate the
equipment.
WARNING: Should any problems
occur, disconnect the AC cord and
refer servicing to
technician.
a
qualified
NOTE: This equipment has been tested and
2
PLV16151S1 VEN - WM CANADA.pmd
2
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
13.Unplug this apparatus during lightning
storms or when unused for long periods
of time.
4. Follow all instructions.
14.Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
10.Protect the power cord from being
walked on or pinched particularly at
plug, convenience receptacles, and the
point where they exit from the
apparatus.
11.Only use attachments/accessories
specified by the manufacture.
12.Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold
with the apparatus.
When a cart is used,
use caution when
moving the cart/
apparatus combination
to avoid injury from tip-
over.
3
PLV16151S1 VEN - WM CANADA.pmd
3
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SAFETY PRECAUTIONS ............................................................................................ 2
IMPORTANT SAFETY INSTRUCTIONS .................................................................... 3
REMOTE CONTROL ................................................................................................. 4
ACCESSORIES ........................................................................................................... 4
REMOTE CONTROL REFERENCE GUIDE................................................................. 5
UNIT REFERENCE GUIDE ........................................................................................ 6
CONNECTIONS.................................................................................................. 8–13
Connecting a TV antenna/Cable/Satellite .............................................................. 8
Connecting to A/V devices (VCR, PVR Camcorder, Game System, etc.) ............... 9
Connecting to Devices with a composite (yellow RCA-type) Video Output ........ 10
Connecting to Devices with a composite (yellow RCA-type) Video Input ........... 11
Connecting to sources with component video output (DVD - only 480i, 480p, 720p
& 1080i are supported) ........................................................................................ 12
Connecting an audio amplifier ............................................................................ 12
Connecting a PC.................................................................................................. 13
Connecting the power cord ................................................................................. 13
INSTALLATION ....................................................................................................... 14
Mounting on the wall .......................................................................................... 14
USING HEADPHONES ........................................................................................... 14
TV SETUP ........................................................................................................... 15-21
Main menu .......................................................................................................... 15
Picture menu ....................................................................................................... 15
Sound menu ........................................................................................................ 16
Setup menu ......................................................................................................... 17
Parental setting .................................................................................................... 18
TV setting ............................................................................................................ 20
MTS setting .......................................................................................................... 21
Restore setting ..................................................................................................... 21
TROUBLESHOOTING GUIDE ................................................................................ 22
MAINTENANCE ...................................................................................................... 23
4
PLV16151S1 VEN - WM CANADA.pmd
4
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
USING THE REMOTE CONTROL
• Point the remote control at the REMOTE SENSOR located on the unit.
• When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR
may not work properly.
• The recommended effective distance for using the remote control is about 16 feet (5
meters).
TO CHANGETHE REMOTE CONTROL BATTERY
1. Open the battery door.
2. Insert two “AAA” batteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the batteries.
Note:
• If the Remote Control is not going to be used for a long time, remove the batteries to
avoid damage caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-
ZINC) or rechargeable (NICKEL-CADMIUM) batteries.
WARNING:
Do not dispose of batteries in a fire or they may leak and/or explode.
ACCESSORIES
PLEASE LOCATE THE INCLUDED ACCESSORIES.
Remote control (with batteries) ........................................................................ x 1
Specifications and appearance are subject to change without notice.
Need More Help?
DO NOT RETURN THISTO THE STORE
5
PLV16151S1 VEN - WM CANADA.pmd
5
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL REFERENCE GUIDE
6) DISPLAY button
Press to show which input you are
watching (TV Channel/AV/YUV/PC).
7) SLEEP button
Sets the SLEEP timer. The unit will
remain ON for the time that is set, and
will automatically shut off afterwards.
8) CC button
Press to activate the Closed
Captioning feature. This function only
works on programs broadcasted with
captions.
9) FORMAT button
Press to select the picture format.
10) STANDBY/ON button
Turns the unit ON and puts the unit
into STANDBY mode.
11) YUV IN button
Directly select YUV IN (component
video) mode.
12) AV IN button
Directly selects AV IN mode.
13) LAST CH button
Press to switch repeatedly between
the last two channels displayed.
1) FUNCTION button
14) MUTE button
Toggle between AV/YUV/PC/TV.
Press to turn off the sound.
2) TV button
Press to select TV channel mode.
3) Number (0 - 9) buttons
Use to change the TV channels.
4) EXIT button
Press to exit the menu and return
directly to normal viewing.
5) Cursor (
15) PICTURE button
Select from preset screen display
settings to match the type of show you
are watching (Standard, Personal,
Movie, Dynamic, & Soft).
16) SOUND button
Select from preset sound settings
,
, , ) buttons
(Personal, Voice, Music, Theater) to
match the type of show you are
watching.
Press to highlight selections on a menu
screen and make adjust certain
settings.
MENU button
Press to display the on-screen menu.
+ CH – button
Move CH+ or CH– through the TV
channels.
+ VOLUME – button
Press to adjust the volume level.
6
PLV16151S1 VEN - WM CANADA.pmd
6
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
UNIT REFERENCE GUIDE
FRONT & BOTTOM VIEW
1) Color LCD Screen
2) STANDBY indicator
8) REMOTE CONTROL SENSOR
Do not block this sensor or remote
control will not work.
9) Power Cord
10) Headphones Jack
11) AV IN Video Input Jack
12) AV IN Audio Input Jacks (Left / Right)
13) AV OUT Audio Output Jacks (Left/
Right)
Indicates whether the unit is ON or
in STANDBY (OFF) mode.
Light On: The unit is in STANDBY.
Light Off: The unit is turned ON.
3) STANDBY/ON button
Turns the unit on and off.
4) MENU button
Enter the Setup menu.
14) PC IN Audio Jack
5) FUNCTION button
15) AV IN S-Video Input
Select TV, AV IN, YUV IN or PC.
16) YUV IN ComponentVideo Inputs (Y/
6)
/
buttons
PB/PR)
Select a TV channel and highlight
selections (Up & Down) on the menu
screen.
17) YUV INAudio Input Jacks (Left/Right)
18) AV OUT Video Output Jack
19) PC IN MONITOR/VGA Jack
20) TV Antenna Cable terminal - Coaxial
TV antenna input
7) – VOL + controls
Adjust the volume level and highlight
selections (Left & Right) on the menu
screen.
7
PLV16151S1 VEN - WM CANADA.pmd
7
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING ATV ANTENNA/CABLE/SATELLITE
To view television channels correctly, a signal must be received from one of the following
sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Note:
For receiving over-the-air TV broadcasts, we recommend that you use an external fixed
antenna. Should you require the use of a temporary antenna, please ensure that you
purchase an antenna with sufficient ability to receive in weak signal areas. Only when
you are in close proximity to a transmitter will a temporary antenna reproduce a signal
as strongly as a fixed antenna.
Satellite, Cable, or
TV antenna cable to
TV ANTENNA
CABLE Terminal
(cable not included)
8
PLV16151S1 VEN - WM CANADA.pmd
8
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING TO A/V DEVICES (VCR, PVR, CAMCORDER, GAME
SYSTEM, ETC.)
Connecting to Devices with an S-Video Output
To connect to A/V devices such as a VCR or camcorder:
- Connect to a VCR
Connect the right (red) and left (white) audio output
from the VCR to the right (red) and left (white) input
on this unit (Audio cable not included).
Connect the S-VIDEO output from the VCR to the S-
VIDEO input on this unit (S-VIDEO cable not
included).
Make sure you connect both audio and video from
the same VCR to the same input (AV IN).
Note:
Please refer to the user manual for
the VCR for more information.
- Connect to a camcorder
Connect the right (red) and left (white) audio output
from the camcorder to the right (red) and left (white)
input on this unit (Audio cable not included).
Connect the S-VIDEO output from the camcorder to
the S-VIDEO input on this unit (S-VIDEO cable not
included).
Make sure you connect both audio and video from
the same camcorder to the same input (AV IN).
Note:
Please refer to the user manual for
the camcorder for more
information.
9
PLV16151S1 VEN - WM CANADA.pmd
9
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING TO DEVICES WITH A COMPOSITE (YELLOW RCA-
TYPE)VIDEO OUTPUT
To connect to A/V devices such as a VCR or camcorder:
- Connect to a VCR
Connect the right (red) and left (white) audio output
from theVCR to the right (red) and left (white) input
on this unit and connect the video (yellow) output
from theVCR to the video input on this unit (Video/
Audio cable not included).
Make sure you connect both audio and video from
the same VCR to the same input (AV IN).
Note:
Please refer to the user manual for the VCR for
more information.
- Connect to a camcorder
Connect the right (red) and left (white) audio output
from the camcorder to the right (red) and left
(white) input on this unit and connect the video
(yellow) output from the camcorder to the video
input on this unit (Video/Audio cable not included).
Make sure you connect both audio and video from
the same camcorder to the same input (AV IN).
Note:
Please refer to the user manual for the camcorder
for more information.
10
PLV16151S1 VEN - WM CANADA.pmd
10
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING TO DEVICES WITH A COMPOSITE (YELLOW RCA-
TYPE)VIDEO INPUT
To connect to A/V devices such as a VCR, PVR or camcorder:
- Connect to a VCR/PVR
Connect the right (red) and left (white) audio input
from theVCR/PVR to the right (red) and left (white)
output on this unit and connect the video (yellow)
input from the VCR/PVR to the video output on
this unit (Video/Audio cable not included).
Make sure you connect both audio and video from
the same VCR/PVR to the same output (AV OUT).
Note:
• Please refer to the user manual for the VCR/
PVR for more information.
• After connection, please operate in TV/AV
mode.
- Connect to a camcorder
Connect the right (red) and left (white) audio input
from the camcorder to the right (red) and left
(white) output on this unit and connect the video
(yellow) input from the camcorder to the video
output on this unit (Video/Audio cable not
included).
Make sure you connect both audio and video from
the same camcorder to the same output (AV OUT).
Note:
• Please refer to the user manual for the
camcorder for more information.
• After connection, please operate in TV/AV
mode.
11
PLV16151S1 VEN - WM CANADA.pmd
11
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTINGTO SOURCESWITH COMPONENTVIDEO OUTPUT
(DVD - ONLY 480I, 480P, 720P & 1080I ARE SUPPORTED)
Devices with component video output must be
connected to the YUV input:
Connect the three video outputs (Y, Pb, Pr) from
the source to the corresponding video inputs on
this unit (Component video cable not included).
Connect the right (red) and left (white) audio output
from the source to the right (red) and left (white)
input on this unit (Audio cable not included).
Make sure you connect both audio and video from
the same source to YUV IN.
Note:
Please refer to the user manual for your component
video source for more information and connection
details.
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio
amplifier and external speakers.
Connect the right (red) and left (white) audio
OUTPUT from this unit to the right (red) and left
(white) audio INPUT on your amplifier. Refer to
your amplifier’s user manual for more information.
Note :
To control the audio, both the TV and the
amplifier must be turned on, and the volume
of the amplifier must be set above 0, or you
will not hear any sound.
If you want to hear the volume of the amplifier
only. Press the volume – button of TV to
decrease the volume or press the MUTE button
of remote control to turn off the sound.
12
PLV16151S1 VEN - WM CANADA.pmd
12
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/VGA
input on this unit using a monitor cable (not
included).
Connect a stereo audio cable (not included) to
the PC AUDIO IN jack on the bottom of this unit,
and the other end to the AUDIO OUT jack on
your computer’s sound card.
CONNECTTHE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY/ON button on the unit or remote control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and all functions are off before making
connections.
• Make sure that all the components are connected correctly.
• To prevent electrical shock, match wide blade of plug to wide slot of wall outlet,
then fully insert.
• When you are not going to use the unit for a long period of time, disconnect the
power cord.
13
PLV16151S1 VEN - WM CANADA.pmd
13
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
MOUNTING ON THE WALL
This unit isVESA-compliant, and is designed to be wall-mounted with aVESA-compliant
75mm x 75mm mounting kit designed for flat-panel TVs (sold separately). Mount this
unit according to the directions included with the mounting kit.
75mm
USING HEADPHONES
• Turn down the volume before connecting headphones to the unit, then adjust the
volume to your desired level.
• When headphones are connected, no sound will come from the front speakers.
Note:
• Avoid listening to sound at high levels for prolonged periods of time. This may be
harmful to you and may cause hearing loss.
14
PLV16151S1 VEN - WM CANADA.pmd
14
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
MAIN MENU
1. Press the MENU button.
2. Use or button to select the options (Picture
/ Sound / Setup / TV Setting / Restore Setting).
3. The screen will change to your selected mode
immediately.
4. To exit the MAIN MENU and return to the
normal screen, press the EXIT button on remote
control.
Note: When you are in AV, PC & YUV mode, the TV Setting option will not be shown.
PICTURE MENU
1. Press the MENU button.
2. Use or button to select the Picture menu, then press the button to confirm
the setting.
3. Use
or
button to select the options (Brightness, Contrast, Color, Sharpness,
Hue, Color Temp, Mode) and adjust them using the or buttons. (The screen will
change to your desired setting).
4. Repeat step 3 to adjust other options.
5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on
remote control.
TV / AV MODE
• Brightness : Adjust to brighten the darkest parts
of the picture.
• Contrast : Adjust to sharpen the picture quality.
The black portions of the picture become richer
in darkness and the white become brighter.
• Color : Adjust the color of the picture.
• Sharpness : Adjust the sharpness level to
improve detail in the picture.
• Hue : Adjust the hue of the picture. (Toward
purple / Toward green)
• ColorTemp :Adjust the three color temperature
of the picture. Select Normal (balanced) / Cold
(blue white) / Warm (red white) mode.
• Mode : Select from preset screen display
settings to match the type of show you are
watching (Standard, Personal, Movie, Dynamic,
& Soft).
YUV MODE
15
PLV16151S1 VEN - WM CANADA.pmd
15
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
In PC mode
Use or button to select the options (Brightness, Contrast, Frequency, Phase, H offset,
V offset, Auto config, Color Temp, Mode) and adjust them using the
or
buttons.
(The screen will change to your desired setting).
-
-
Resolution : 1024 x 768 max
Refresh Frequency : 60Hz max
PC MODE
• H offset : Center the image by moving it left or
right.
• V offset : Center teh image by moving it up or
down.
• Color Temp : Adjust the three colour
temperature of the picture. Select Normal
(balanced) / Cold (blue white) / Warm (red
white) mode.
SOUND MENU
1. Press the MENU button.
2. Use
or
button to select the Sound menu, then press
button to confirm the
setting.
3. Use or button to select the options (Bass,Treble, Balance, Mode) to be adjusted
and use the button to adjust each individual setting.
4. Repeat step 3 to adjust other settings.
5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on
remote control.
Note:
Experiment with different sound settings until you
find the settings you prefer.
TV / AV / YUV / PC MODE
• Bass : Adjust the bass range.
• Treble : Adjust the treble range.
• Balance : Adjust the balance level toward the
left or right speakers.
• Mode : Select from preset sound settings
(Personal, Voice, Music, Theater) to match the
type of show you are watching.
16
PLV16151S1 VEN - WM CANADA.pmd
16
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
SETUP MENU
1. Press the MENU button.
2. Use
setting.
3. Use
or
button to select the Setup menu, then press
button to confirm the
or
button to select the options (OSD Size, Language, Parental, Timers) to
buttons to adjust the individual settings.
be adjusted, then use the or
4. Repeat step 3 to adjust other settings.
5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on
remote control.
Notes:
TV / AV MODE
• OSD Size : Select the screen size you prefer.
• Language : Select from English / Français /
Español.
• Parental : Sets the parental controls. Refer to
the section titled “PARENTAL SETTING” for
instructions.
• Timers : Select the Sleep timer / Reminder timer
mode : Off -> 5 - - - - -> 115 -> 120.
Sleep timer : Set the LCD TV to turn itself off
within a certain time.
YUV / PC MODE
Reminder timer : Remind the show time setting
of TV.
17
PLV16151S1 VEN - WM CANADA.pmd
17
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
PARENTAL SETTING
Lock code
1. Press the MENU button.
2. Use
or
button to select the Setup menu, then press
button to confirm the
setting.
3. Use or button to select the Parental menu, then press or button to confirm
the setting and the menu locked screen will be displayed.
4. Enter a 4-digit lock code. Once entered, the screen will enter the Parental menu.
The preset lock code is “ 0000 “.
5. To exit the MAIN MENU and return to the normal screen, press the EXIT button on
remote control.
TV / AV MODE
If you forget the password,
enter “ 8 8 8 8 “ to unlock parental control.
18
PLV16151S1 VEN - WM CANADA.pmd
18
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
Child lock
1. Press the MENU button.
2. Use
setting.
3. Use
or
button to select the Setup menu, then press
button to confirm the
or
button to select the Parental menu, then press or button.
4. Enter a 4-digit to select the Lock code and turn on/off the Child lock using
or
button.
TV / AV MODE
5. Use
or
button to select various Parental settings and use the or or button
to adjust each setting.
6. Repeat steps 4-5 to adjust other options.
7. To exit the MAIN MENU and return to the normal screen, press the EXIT button on
remote control.
1. OFF
inappropriate for children under 13.
5. R: RESTRICTED, Under 17 requires
accompanying parent or adult guardian
for viewing in movie theaters.
6. NC-17: No one 17 or under admitted in
movie theaters,
2. G: GENERAL AUDIENCES, Suitable
for all ages.
3. PG: PARENTAL GUIDANCE
SUGGESTED - Some material may
not be suitable for children.
4. PG-13: PARENTS STRONGLY
CAUTIONED - Some material may be
MPPA
Rating
7. X: Adults Only.
1. OFF
4. TV-G : General Audience.
2. TV-Y: Recommended for all children.
3. TV-Y7: Recommended for all
children age 7 and above.
5. TV-PG : Parental Guidance Suggested.
6. TV-14 : Parental Strongly Cautioned.
7. TV-MA : Mature Audience Only.
PG
Rating
1. Violence: Contains violence.
2. Sex: Contains sexual situations.
3. Language: Contains adult language.
4. Dialogue: Contains dialogue.
5. Fantasy Violence : Contains fantasy
violence.
PG
Contents
1. E: Exempt.
2. C: Children.
SUGGESTED - Some material may not
be suitable for children.
Can.
Eng
3. C8: Recommended for children age 8.
4. G: GENERAL AUDIENCES, Suitable
for all ages.
6. 14+:Viewers 14 years and older.
7. 18+: Adult Programming.
5. PG:
PARENTAL
GUIDANCE
1. E :Exempt.
4. 13+: Not suitable for children under the
age of 13.
5. 16+: Not suitable for children under the
age of 16.
6. 18+: Adult Programming.
2. G :GENERALAUDIENCES, Suitable for
Can.
French
all ages.
3. 8+: Not recommended for young
childred.
19
PLV16151S1 VEN - WM CANADA.pmd
19
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
TV SETTING
1. Press the TV MENU button.
2. Use the
confirm the setting.
3. Use the or button to select the Channel no. setting and use the or button
to change the channel no.
4. Use the or button to select the Tuning mode and use the
change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
5. Use the or button to select the Auto tune and press the or button to
or
button to select the TV setting menu, then press the
button to
or
button to
confirm the selection. The unit will immediately search through all possible TV
channels and store those channels with signals in memory. After this is complete,
the unit will switch to the first channel found.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : This option is available in TV mode only.
TV MODE
Remarks:
• Channel no. : 2-69 channel for Air mode, 1-
125 channel for Cable mode.
• Tuning mode :Air or Cable mode are available.
• Auto tune : Searches for usable stations and
stores them in memory.
• Skip
:
ON
-
Skip weak channels.
OFF - No channel skip.
• Fine tune :The frequency changes to allow fine
tuning.
• AFC : Auto frequency control.
• MTS : Select the Mono sound/Stereo sound/
Secondary Audio Program (SAP). Refer to the
section titled “MTS SETTING” for instructions.
20
PLV16151S1 VEN - WM CANADA.pmd
20
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
MTS (Multi-channel Television Sound) setting
TV MODE
This feature allows reception of sound other than
the main audio for the program.
1. Press the MENU button.
2. Use
or
button to select the TV setting
menu, then press
button to confirm the
setting.
3. Use
or
button to select MTS menu, and
press or button to select the options (Mono,
Stereo, SAP)
4. To exit the MAIN MENU and return to the
normal screen, press the EXIT button on remote
control.
Note:
• MTS only operates while in TV mode.
• The SAP (Secondary Audio Programs) feature allows a TV station to broadcast other
information, which could be audio in another language.
RESTORE SETTING
If you reset the TV to the factory settings, all your present settings on picture & sound
will be erased and replaced by the factory’s default settings. However, picture setting in
PC mode and parental setting will not be erased.
21
PLV16151S1 VEN - WM CANADA.pmd
21
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
SYMPTOM
CAUSE (AND REMEDY)
No power.
• Check that the AC power cord is connected.
• Turn on the unit.
The remote does not
function.
• Remove any obstacles between the remote and the
unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with a new one.
Bad Picture (snow,
• Check the location of the antenna and adjust it if
necessary.
• Make sure the antenna cable is connected firmly.
multiple
images,
distortion, blurry)
• Make sure all input cables are firmly connected.
No sound.
• Increase the volume.
• Check whether the mute function has been activated
on the Remote Control.
Black and white picture.
No picture or sound.
• Check the Picture setting within the Setup menu.
• Check to make sure the program you are watching is
broadcast in Color and not Black & White.
• Make sure the unit is plugged in and turned on.
• Make sure that the TV mode is selected.
• Try a new channel to check for possible station trouble.
• Make sure the antenna is connected properly.
• Increase the volume.
• Make sure the antenna or audio/video source device
is working properly.
• Make sure all cables are connected firmly.
• Check for local interference.
Colored patches of
picture.
• Make sure there are no unshielded electrical devices
nearby that are causing interference.
• Turn the TV off for 30 minutes, then try it again.
22
PLV16151S1 VEN - WM CANADA.pmd
22
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect the AC power cord before maintaining
the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean
with a cloth which has been dipped in a weak soap-and-water solution and wrung
out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use
compressed air to remove dust.
23
PLV16151S1 VEN - WM CANADA.pmd
23
1/10/2007, 5:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|