Venturer Digital Photo Frame DPF562SE User Manual

Mounting on theWall  
IMPORTANT SAFETY INSTRUCTIONS  
ACCESSORIES  
The unit can be mounted either horizontally or vertically on the wall by the mounting  
holes on the back of the unit.  
Please check and identify the supplied accessories.  
To order accessories visit web site (http://www.1800customersupport.com)  
1. Read these instructions.  
2. Keep these instructions.  
3. Heedallwarnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
Caution:  
Mounting the unit requires special skills that should only be performed by qualified  
personnel.  
AC Power Adapter.................................................................................... x 1  
Stand........................................................................................................ x 1  
Make sure that the wall mount is being fixed securely enough so that it meets  
safety standards.  
64mm  
Digital Photo Frame  
116mm  
CONTROL REFERENCE GUIDE  
7. Do not block any of the ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Operating Instructions  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
2
9. Do not defeat the safety purpose of the polarized or grounding - type plug.  
Apolarizedplughastwobladeswithonewiderthantheother. Agrounding  
typeplughastwobladesandathirdgroundingprong.Thewidebladeorthe  
third prong is provided for your safety. When the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete  
outlet.  
OFF  
ON  
ENTER  
ROTATE  
MENU  
3
10. Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
POWER SUPPLY  
RIGHT SIDE OF UNIT  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand, tripod, bracket, or  
tablespecifiedbythemanufacturer,orsoldwith  
theapparatus. Whenacartisused, usecaution  
whenmovingthecart/apparatuscombinationto  
avoid injury from tip-over.  
Portable  
Cart Warning  
1
AC Power Adapter  
Back of Unit  
13. Unplug this apparatus during lightning storms or when unused for long  
periods.  
OFF  
ON  
Need More Help?  
DO NOT RETURN THIS PRODUCTTOTHE STORE  
SlidetheOFF/ON  
switch to ON  
position.  
14. Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhen  
the apparatus has been damaged in any way, such as the power-supply  
cord or plug is damaged, liquid has spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
To  
AC 120V  
outlet  
4
SAFETYPRECAUTIONS  
To DC IN 9V jack  
Caution:  
CAUTION: TOREDUCETHERISKOF  
ELECTRICSHOCK,DONOTREMOVE  
COVER(ORBACK).  
NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO  
QUALIFIEDSERVICEPERSONNEL.  
The AC power adapter included with this unit is for its use only. Do not use it with  
FCC Statements  
other equipment.  
This device complies with the Part 15 of the FCC rules. Operation is subject to the  
following two conditions:  
Turn off the unit before unplugging the AC power adapter from the unit to avoid  
the unit being damaged.  
When the unit is not going to be used for a long time, disconnect the AC power  
adapter from the AC power outlet.  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesirable operation.  
OFF  
ON  
5
6
OFF  
ON  
The lightning flash with an arrowhead symbol, within the equilateral  
triangle, is intended to alert the user to the presence of uninsulated  
"dangerous voltage" within the product's enclosure that may be of sufficient  
magnitude to cause an electric shock.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an AC power outlet on a circuit different from that to  
which the receiver is connected.  
– Consult the dealer or an experienced radio/TV technician for help.  
Important:  
Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug  
from the wall outlet at once.  
When the AC power adapter is plugged in, the apparatus is not completely  
disconnected from the main power source, even when the unit is turned off.  
The exclamation point within the equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in this owner's manual.  
Warning:  
1. LCD Screen  
2. Function Buttons  
: Skip to the previous photo.  
: Skip to the next photo.  
ROTATE Button  
The AC power adapter is used as the disconnect device. To completely disconnect  
the apparatus from the main power supply, the AC power adapter should be  
disconnected from the AC power outlet completely.  
WARNING  
Button  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO  
RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR  
NEAR THIS UNIT.  
Press to start, pause and resume  
photo slide show playback.  
Press and hold to display the  
thumbnail menu. Use the  
buttons to select a photo, press the  
Rotate the photo by 90o.  
Press and hold the ROTATE button  
to change the display aspect ratio (Fit  
Screen or Return to normal).  
MENU Button  
,
,
INSERTING MEMORY CARD  
On Placement  
Do not use the unit in places that are extremely hot, cold, dusty or humid.  
Do not restrict the airflow of the unit by placing it in a place with poor airflow, by  
covering it with a cloth, or by placing it on carpeting.  
Keep the stand of the unit clear from cables. Cables could pull the unit to the  
floor.  
Enter and exit the Setup Menu.  
3. SD / xD / MS Card Slot  
4. DC IN 9V Jack  
5. OFF / ON Switch  
6. Removeable Stand  
button to start playback.  
Turn off the unit before inserting or removing the memory card.  
Do NOT insert or remove the memory card when the unit is playing files.  
ENTER Button  
Confirm settings in the Setup Menu.  
Warning: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user's authority to operate the equipment.  
,
,
Buttons  
The unit is compatible with the following Memory Card:  
Move between selections on the  
Setup Menu screen.  
The unit should not be exposed to excessive heat such as sunshine, fire or the like.  
• Secure Digital Card (SD) • Memory Stick Pro (MS Pro) • Extreme Digital (xD)  
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.  
On Safety  
Insert any compatible memory card with the front label facing the rear of the product.  
Do not force the memory card into the memory card slot.  
When connecting or disconnecting the AC power adapter, grip the plug and not  
the cord itself. Pulling the cord may damage it and create a hazard.  
When you are not going to use the unit for a long period, disconnect the AC  
power adapter.  
INSTALLATION  
QUICK START GUIDE  
For easy removal, memory card  
will stick out a bit.  
Using the Stand  
The unit can be placed either horizontally or vertically to fit the photos on display by  
its stand.  
Temperature and Humidity Limitations  
Operating temperature: 41°F ~ 95°F (5°C ~ 35°C)  
Humidity: 20% ~ 80%  
For easy removal, memory card  
will stick out a bit.  
1. Slide the stand into the slots on the  
back of the unit as illustrated.  
2. Place the unit horizontally or vertically.  
SD/MMC  
Insert a memory card.  
Rating Plate Location  
The rating plate is located on the back of the unit.  
MS Pro  
xD  
To AC 120V outlet  
AC Power  
Back of Unit  
Adapter  
WARNING: Should any trouble occur, disconnect the AC power adapter  
and refer servicing to a qualified technician.  
OFF  
ON  
SlidetheOFF/ON  
switch to ON  
position.  
Turn off the unit before inserting or removing the memory card.  
Do NOT insert or remove the memory card when the unit is playing files.  
Note:  
To DC IN 9V jack  
If you cannot easily insert the memory card, you may have inserted it incorrectly.  
Try to turnover the card and then insert again.  
E - 1  
E - 2  
E - 3  
E - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technics Stereo Receiver SA AX610 User Manual
Tripp Lite Switch B006 VUA4 K R User Manual
Tripp Lite Welding System 450 1400VA User Manual
Uniden Cell Phone MHS 350 User Manual
Uniden Cordless Telephone UND1685 User Manual
Victor Technology Calculator 1208 2 Series User Manual
ViewSonic Computer Monitor E91F User Manual
ViewSonic Computer Monitor VS14691 User Manual
ViewSonic Speaker System VSACC27952 1 User Manual
Weed Eater Lawn Mower 438178 User Manual