S E R I E S
IA-400
Subwoofer Amplifier
IA-IWS1
In-Wall Subwoofer
w w w . c h r y s a l i s a c o u s t i c s . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
TABLE OF CONTENTS
Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
– IA-400 Subwoofer Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
– IA-IWS1 (In-Wall Subwoofer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Setup Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
– Front Panel Controls and Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
– Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Rear Panel Connections - Detailed Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
– About Low-Pass Crossovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
– A Word About Your Home Theater Receiver’s Crossover and the IA-400 Amplifier’s Crossover . . . . . . . . . . . . . . . . . . . . . . .8
– A Word About Interconnect Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
– A Word About Subwoofer Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Restore Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Care of Your Amplifier and Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Troubleshooting and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Appendix A: RS-232 Serial Overview and Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Chrysalis Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
InstallAdvantage IA-400 Amp manual
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
CONGRATULATIONS
Congratulations on your purchase of a Chrysalis™ InstallAdvantage Series (IA) amplifier and subwoofer. This system represents the
state-of-the-art in low frequency reproduction. Read and follow the instructions below to ensure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open the speaker
enclosure or the amp chassis cover. Please observe all warnings on the equipment itself. There are no user serviceable parts inside.
Please refer all service questions to your authorized Chrysalis dealer.
Prior to Installation
Please unpack the system carefully. Please save the carton and all packaging materials for future use. Record the serial number in the
space provided on the warranty card, on page 19, for future reference.
PRODUCT FEATURES
IA-400 Subwoofer Amplifier
• 400 watts dynamic/200 watts RMS high efficiency, Class A/B
• DSP-controlled
• Four selectable presets for customized listening mode
• Automatic 5-band room equalizer (microphone included)
• Night-mode setting
• Mute control
• Line-level (RCA) inputs and outputs
• Speaker-level inputs with 5 way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0, 90, 180 or 270 degrees)
• Built-in adjustable (30-160 Hz) digital low-pass crossover with 24 dB/octave slope
• Driver Displacement Control software to prevent over excursion and amp clipping
• Blue power indicator LED
• RS-232 Serial Interface
• 12 Volt trigger
• Universal IR repeater mini-jack
• Preset-specific subsonic filter
InstallAdvantage IA-400 Amp manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
IA-IWS1 (In-Wall Subwoofer)
- Two high excursion 6.5” active drivers, two 12.5” x 3” oval passive radiators with ribbed rubber surround
- High-excursion rubber surrounds on both active and passive drivers
- 2” 4 layer copper voice coils
- Frequency Response: 30 - 120Hz (+/- 3 dB)
- 4 ohm impedance
NOTE: The IA-IWS1 must be driven with the IA-400 subwoofer amplifier. Use of any other power source voids the warranty.
SETUP CHECKLIST
Be sure to do the following to ensure the best performance from your subwoofer:
K If possible, optimize the placement of the subwoofer(s) in the listening area. See page 9 of the User’s Manual.
K Install and wire the subwoofer per the instructions on pages 3 - 9.
K Select the proper volume level. See page 4.
K Be sure the low pass crossover is set correctly. See pages 8 - 9.
K Be sure to equalize the subwoofer using the microphone and Auto-EQ feature. See page 10.
K Be sure to set the phase control on the remote. See page 10.
K Select the correct preset for the source material. See page 12.
Your new Chrysalis subwoofer system provides for a number of installation options. Read all the installation information below in order to
determine which installation option is best for your system. Remember to perform all installation procedures with system power turned off.
NOTE: For proper set-up and installation of the IA-IWS1 (In-Wall Subwoofer), please refer to IA-IWS1 Quick Install Guide.
InstallAdvantage IA-400 Amp manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
INSTALLATION
Front Panel Controls and Displays
Figure 1: Front Panel Connections of the IA-400 amplifier.
Following are brief descriptions of the controls described in Figure 1. More detail on these controls can be found in the next section.
(1) Power Switch
This button forces your IA-400 amplifier into standby mode. The power LED turns amber, the numeric LED shuts off, and the
amplifier puts out no power. The unit will remain in this mode until the POWER button is pressed again. To fully deactivate
(i.e. power down) the unit, use the main power switch on the back panel.
(2) Power LED
This LED illuminates when the power is on. Blue indicates normal operation. The LED turns amber when the unit is in standby mode
or the remote has been used to deactivate the unit, and dims when the unit is in night mode.
(3) Mic Input
Connect the supplied microphone for the Auto-EQ feature to this mini-jack input.
(4) Remote Eye
This is the eye that receives infrared commands from the supplied remote.
(5) Low-Pass Crossover
Use these up and down buttons to select the frequency below which all signals will be routed to the subwoofer (for example, 80 Hz),
rather than to the main speakers.. The frequency is indicated on the LED display briefly, then the display reverts to showing the
subwoofer’s volume level. The slope is fixed at 24 dB/octave. To deactivate the crossover, press BOTH the up and down crossover
buttons at the same time – two dashes on the display indicate the crossover is deactivated and the woofer plays all frequencies presented
to it. Please see page 8 for a more detailed discussion on crossovers.
InstallAdvantage IA-400 Amp manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
(6) LED Numeric Indicator
This LED supplies information on volume, crossover, woofer type, and other information. The “light” button on the remote deactivates
this display. Upon startup, the display shows the “IW”, referring to the IA-IWS1 subwoofer that the IA-400 amp is controlling, then
reverts to the volume indicator.
(7) Volume Control
These buttons allow you to balance the output from the subwoofer to the main speakers in your system. The volume should be set to
achieve similar volume level of both the main speakers and subwoofer. The default volume is 30.
Note: Volume can also be controlled by using the supplied remote.
WARNING: Some manufacturers preset their receivers with the Sub-Out (a.k.a. LFE) channel signal at a minimum level. It is very
important to verify that your receiver Sub-Out channel is set to the same output level as your front right and left channels. Refer to your
receiver manual for the individual channel level adjustment procedure. If your receiver Sub-Out channel is set too low, the subwoofer may
appear to have a weak output, it may sound noisy or distorted, and the Auto On/Off feature may not operate properly.
(8) Optional Rack Mount Ears (Included)
These ears can be attached to the IA-400 amp to allow standard 19” rack mounting.
Rear Panel Conections
Following are brief descriptions described in Figure 2. More detail on these controls can be found in the next section.
Figure 2: Rear Panel Connections of the IA-400 amplifier.
(9) Thru Jacks
These RCA connectors are for passing along the same signal that goes into your subwoofer to a second “daisy-chained” system. The signal
from these RCA connectors is the same as the input signal.
(10) Line Input / LFE Input
Connect these jacks to the LINE OUT preamp output, LFE output, or subwoofer output jacks of your receiver/processor. If using the
LFE output from your receiver or processor, plug the single cable into the jack labeled LFE input or, for more signal, use a “Y” connector
(optional) and feed the signal into both “R” and “L” inputs. Examples of these types of connections can be found in Figures 2A and 2B.
InstallAdvantage IA-400 Amp manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
Line-Level
Subwoofer Signal
from Source (LFE)
Note: A “Y” Connector can
be used as an option.
Figure 2A: Mono (LFE) Line-Level Connection.
Stereo Line-Level Output
to another system, e.g. IA-400
Stereo Line-Level
Input from Source
Figure 2B: Stereo Line-Level Connection.
InstallAdvantage IA-400 Amp manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
(11) IR Input
An IR repeater can be connected to this mini-jack.
(12) 12V Trigger
When this mini-jack is connected, the unit remains in power-off mode until 12 volts is supplied. Polarity is irrelevant.
(13) RS-232
Use this port to communicate with an RS-232 controlled touch panel system. See Appendix A for an explanation of the use of the serial
port, available commands, and their formats.
(14) Signal Sensing Auto On/Off Switch
With this switch in the “standby” position, your subwoofer can be safely left with the main power switched on continuously. The
subwoofer amp will turn itself on automatically when an audio signal is present. If no signal is present for approximately 10 minutes,
the unit will switch to standby mode. While in standby mode, your subwoofer amp will draw very minimal power. This function can
be disabled by leaving the switch in the “always on” position.
(15) Speaker Level Input Terminals
If you do not connect the IA-400 amplifier to your receiver using the line input/LFE input connection (Item 10, above), connect these
input terminals to the speaker output terminals of your amplifier or receiver. If you use this method of connection, when you go to the
receiver speaker set up menu, make sure you select the “large” speaker option. Also, select the option for no subwoofer. This will make
sure all bass and LFE information is fed to the speaker outputs and will be received by your IA-400 amplifier.
NOTE: Using both speaker terminals and the line level inputs is not recommended, as this may damage the IA-400 amplifier or
your receiver.
(16) Speaker Level Output Terminals
These connections send a crossed-over speaker-level signal to the front speakers. When connected in this fashion, your satellite speakers
will be crossed over at 80 Hz. This removes the lower bass frequencies from your satellites, enabling them to do a better job reproducing
high frequencies.
You may also connect your satellites directly to your receiver or amplifier along with the subwoofer if you wish to bypass this crossover.
An example of a speaker-level connection is shown in Figure 3.
InstallAdvantage IA-400 Amp manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
Figure 3: Speaker-Level Connection.
(17) Subwoofer Connection 5-Way Binding Post Terminals
Connect the output terminals to the subwoofer being controlled by the IA-400 amplifier. Only connect ONE subwoofer to the red/black
pair of subwoofer output terminals - DO NOT connect multiple subwoofers to the terminals in any configuration.
Caution!!!
To avoid damage to your IA-400 amp and subwoofer, be sure to maintain correct polarity when making all speaker connections; red (positive)
to red, and black (negative) to black. Be sure that all connections are tight, and that there are no loose strands or frayed wires.
(18) Power Cord Adapter
Connect the detachable power plug to this male interface connection. The detachable cord allows for easy replacement should the original
become damaged.
(19) Fuse
If the unit is not functioning, check the fuse. If the fuse is blown, replace with an identically rated fuse. If the fuse blows again, refer the
unit for service.
(20) Main Power Switch
Press the POWER switch to the ON position to activate the amplifier. If the unit is to be left unused for an extended period of time,
move this switch to the OFF position to prolong the life of the amplifier.
(21) 115V or 230V Operation Selectable Switch
This selectable voltage switch is factory preset for the correct voltage in the geographical region in which the product is sold. To retain
full Chrysalis warranty coverage, this switch should ONLY be operated by a Chrysalis factory authorized service representative during
a FULL factory-authorized mains voltage change procedure. Should anyone other than a Chrysalis factory authorized service
representative attempt to perform a mains voltage change in any way, the warranty for the product will be terminated. In this case,
Chrysalis assumes no liability for any and all injuries to any persons involved, or for any property damage, whether to the subwoofer
or any other property involved or damaged as a result of this unauthorized mains voltage change.
InstallAdvantage IA-400 Amp manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
REAR PANEL CONNECTIONS — DETAILED EXPLANATION
The IA-400 amplifier is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type “INPUT” jacks when connecting
from a pre-amp, signal processor, or line-level crossover. The “SPEAKER LEVEL INPUT” jacks connect directly to the speaker outputs of
an integrated amplifier or receiver. Your amplifier section will notice no additional loading effects when you use these inputs because of their
high impedance.
Note: Do not use both the RCA/Phono “INPUT” connections and “SPEAKER LEVEL INPUT” connections simultaneously.
About Low-Pass Crossovers
All of the IA-400 amplifier inputs sum the left and right channels together and the resulting signal is passed through an adjustable low-pass
crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer’s frequency response from 30 to
160 Hz. The subwoofer’s response will begin rolling off above the frequency you set this control to. The slope is 24 dB/octave.
You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer to the main speakers in your system.
If your main speakers are small with limited low frequency output, you may wish to choose a higher frequency (such as 100-120 Hz) than
you would with larger speakers which have greater low frequency output. The IA-400 amp’s crossover has a default of 80 Hz.
Most receivers and processors provide a menu option in which you can characterize main speakers as “large” or “small” speakers. This affects
the bass signals passed to the main speakers. We recommend in most cases setting the main speakers to “small,” despite their size and
frequency response characteristics, allowing all multi-channel base and LFE signals to be passed to the IA-400. This is because the powerful
400 watt IA-400 amp combined with the IA-IWS1 subwoofer you have purchased are more likely suited to low bass reproduction than your
amp and main speakers. With the burden of low frequency reproduction relieved, your speakers will exhibit better performance, and your
overall system performance will improve.
Disabling the Low-Pass Crossover (Subwoofer Direct)
If your receiver/processor provides a crossed-over signal to the subwoofer, you may want to bypass off the IA-400 amp’s low-pass crossover.
To do this, depress BOTH the Crossover UP and Crossover DOWN buttons simultaneously. The numeric LED will show
that the low-pass crossover has been defeated. To reactivate the low-pass crossover, simply push the crossover UP or crossover DOWN
buttons.
indicating
--
A Word About Your Home Theater Receiver’s Crossover
and the IA-400 Amplifier’s Crossover
Your Chrysalis IA-400 amplifier is designed to operate using the full range audio signal for input when using the built-in crossover.
Many home theater processors/receivers have a “subwoofer out” jack that performs this same function and are designed to be used
with a powered subwoofer.
InstallAdvantage IA-400 Amp manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
In these installations, you may want to bypass the crossover in either the processor or the Chrysalis IA-400 amplifier as described above.
However, in some cases you may want to use BOTH crossovers. If you choose to do this you should stagger the frequencies, (i.e., 120 Hz
subwoofer, 80 Hz processor) for best results.
Note: If not using an external crossover, you should use the subwoofer’s built-in crossover for optimal performance. When using a single
RCA sub out from the processor, it does not matter which line level input (L/R) is used.
A Word About Interconnect Cables
When installing your Chrysalis IA-400 amplifier using the line-level connections, you should always use high quality shielded interconnect
cables. It is recommended that you keep the length of cable as short as possible to avoid any potential external interference problems.
When connecting the IA-400 amplifier to your subwoofer, use a quality speaker cable that is at least 14-gauge. Be very careful to avoid any
loose or frayed strands that could result in a short, causing a dangerous condition and possible damage to your unit. Cables of extremely
large size are typically not required. Extremely large gauge wire may not properly fit in the binding posts, resulting in a poor connection
and possible short circuits.
A Word About Subwoofer Placement
Subwoofers operate at extremely low frequencies, which are primarily omni-directional. Keep in mind that frequency response and output
level can be drastically influenced by room placement, depending on the acoustic properties of the listening room. Typically, the optimum
location for a subwoofer is in a front corner of your listening room. This location will usually offer the greatest output levels and optimum
low frequency extension. Typically, a minimum distance of one to two feet from your TV to the subwoofer will be adequate to avoid any
magnetic interference.
Remember that the built-in 5-band EQ will help to get the most performance out of your subwoofer no matter where it is placed.
Caution!
This amplifier is an electronic device. Do not place the amplifier next to sources of heat such as furnace registers, radiators, etc. Likewise, do not
place the amplifier near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a
way that it will not be walked on, pinched or compressed in any way that could result in damaging the insulation or wire.
InstallAdvantage IA-400 Amp manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
USAGE
This section addresses EQ set-up and day-to-day usage of your IA-400 amplifier.
Remote Control
The features of the IA-400 remote control are listed below.
• POWER — This button forces your IA-400 amplifier unit into standby mode. The power LED turns
amber, the numeric LED shuts off, and the amplifier puts out no power. The unit will remain in this
mode until the POWER button is pressed again. To fully deactivate (i.e. power down) the unit, use the
main power switch on the back panel.
Note: The master power switch on rear panel must be on in order for the front power button to function.
• MUTE — This button mutes the subwoofer’s output. The LED on the amplifier will show 00 if the
unit is muted. To unmute the subwoofer, press the MUTE button again and the original volume
setting shows on the LED.
• EQ — This button automatically EQs the subwoofer using a 5-band internal graphic equalizer. To use
this feature, first plug the supplied microphone into the Mic-In jack on the front panel of the amplifier
and place the mic in your preferred listening position. Then press EQ on the remote for about 2-3
seconds. The subwoofer emits 12 “sweep tones” that cover the frequencies between 20 and 150 Hz. The
LED displays “AU” during the Auto-EQ process. After the sweeps are complete, the unit saves its EQ
settings and returns to normal operation. To prevent accidental invocation of the EQ feature, you must
hold down the EQ button for 2-3 seconds before the EQ sweeps begin.
Figure 4: IA-400 Remote.
Note: Each time the EQ feature is utilized, the EQ settings for the IA-400 amplifier are reset. If the microphone is not plugged in, the
IA-400 amplifier will emit one or two sweep tones then cease the EQ operation. In this case, the previous EQ settings will be preserved.
• PHASE — These buttons allow you to optimize the subwoofer performance for the location and your listening position. Play some bass-
heavy music. While listening, push one of the four phase buttons, listen for a few moments, and then press the next phase button. In most
installations, one of the four button positions will offer an audibly better blend of subwoofer and speakers. Selecting the correct phase
position is just that easy. The LED will show the phase selected by showing “PH” followed by the phase number: 0, 90, 180 or 270.
• LIGHT — If you wish, you can deactivate the numeric LED on your IA-400 amplifier. To do this, press the LIGHT button on your
remote. To reactivate the LED, press the LIGHT button again.
• NIGHT — Night mode limits the maximum output of the subwoofer for late night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Night mode, when active, will reduce the brightness of the blue power LED.
• VOLUME CONTROL — This control allows you to balance the output from the subwoofer to the main speakers in your system. This
control should be set to achieve similar volume level of both the main speakers and subwoofer. When pressing volume up or down, the
volume level change is shown on the numeric LED on the front panel.
InstallAdvantage IA-400 Amp manual
10
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
WARNING: Some manufacturers preset their receivers with the Sub-Out channel signal at a minimum level. It is very important to verify that your
receiver Sub-Out channel is set to the same output level as your front right and left channels. Refer to your receiver manual for the individual channel
level adjustment procedure. If your receiver Sub-Out channel is set too low, the subwoofer may appear to have a weak output, it may sound noisy or
distorted, and the Auto On/Off feature may not operate properly.
Note: The volume can also be adjusted via the volume buttons on the front panel of the amplifier. These buttons have the same effect as
pressing the up and down volume buttons on your remote.
• PRESETS — There are four presets, consisting of Movies, R&B – Rock, Jazz – Classical, and Games. As a preset is chosen, the preset is
shown on the numeric LED as P1 for preset 1, P2 for preset 2, etc. The presets provide the following characteristics for bass reproduction:
Movies:
Maximum output and impact for explosions and other action adventure movie content.
Provides the driving bass found in today’s rock music.
R&B – Rock:
Jazz – Classical:
Games:
The tightest, cleanest, lowest distortion bass. The flattest frequency response of the four presets.
Maximum loudness available for the impact of video games.
Each preset has its own characteristics with respect to subsonic filter, volume differential and a single contour equalizer in order to optimize
the listening mode for the preset.
InstallAdvantage IA-400 Amp manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
The following table indicates musical style and which preset is recommended for it.
MUSICAL STYLE
Action Adventure Movies
Country – Rock
Country – Soft
Folk
SUGGESTED PRESET
Movies
R&B – Rock
Jazz – Classical
Jazz – Classical
R&B – Rock
R&B – Rock
R&B – Rock
Jazz – Classical
Jazz – Classical
Jazz – Classical
Jazz – Classical
Jazz – Classical
R&B – Rock
Jazz – Classical
R&B – Rock
R&B – Rock
R&B – Rock
Jazz – Classical
Jazz – Classical
Jazz – Classical
Jazz – Classical
R&B – Rock
R&B – Rock
R&B – Rock or Jazz – Classical
Games
Indie Music
Pop
Rock
Alternative Rock
Blues
Broadway and Vocalists
Children’s Music
Christian and Gospel
Classic Rock
Classical
Dance and DJ
Hard Rock/Heavy Metal
Latin Music
Miscellaneous
Movies – Non-Action Adventure
New Age
Opera and Vocal
R&B
Rap and Hip-Hop
Soundtracks
Video Games
InstallAdvantage IA-400 Amp manual
12
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
RESTORING DEFAULTS
There is a feature that allows you to restore default settings for your IA-400 amplifier. By pressing presets in EXACTLY the following order
on the remote, the unit’s power light will blink indicating that you have restored defaults.
Preset 1:
Preset 2:
Preset 3:
Preset 4:
Preset 4:
Preset 3:
Preset 2:
Preset 1:
Movies
R&B – Rock
Jazz – Classical
Games
Games
Jazz – Classical
R&B – Rock
Movies
When you press the presets in the above order, the numeric LED will display “P3” indicating that you have restored defaults. The unit’s
volume is reset to level 30 out of 80.
CARE OF YOUR AMPLIFIER AND SUBWOOFER
Do not use any harsh detergents or chemicals to clean the IA-400 chassis or the subwoofer cabinet. Abrasives, detergents, or cleaning
solutions will damage the finish on the IA-400 chassis or the subwoofer cabinet. We recommend using a damp cloth to clean the front,
back and sides.
During normal conditions, the amplifier may be left on continuously without any problems. If you plan to leave the unit unused for an
extended period of time, we recommend that you turn off the unit by the master power switch on the rear panel.
InstallAdvantage IA-400 Amp manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
TROUBLESHOOTING AND SERVICE
Before seeking service for your amplifier or subwoofer, please re-check all systems. Following is a simple troubleshooting guide to assist you.
1. Verify that the unit is plugged in and power outlet used is active.
2. Is the power switch on?
3. Is the unit receiving an input signal from your source?
4. Have all controls on the amplifier (volume, crossover, phase, etc.) been properly set?
5. If the unit has been running at high levels, one of the protection circuits may be engaged. Has the amplifier overheated?
6. Has the power button been depressed on the remote?
7. Is the remote non-responsive? We recommend replacing the batteries in the remote.
If the protection circuitry is active, the unit may cycle on and off until operating parameters return to normal. Under more serious conditions,
the unit may shut off completely. Normal operation should return upon cooling, but you may be required to turn the power off and then on
again to reset the unit.
The following conditions require service by a qualified technician:
1. The power cord has become damaged
2. The unit does not appear to operate normally or exhibits a marked change in performance
3. The unit has been exposed to water
4. Some part of the chassis or circuitry is physically damaged
Thank You for Purchasing an IA-400 Amplifier!
InstallAdvantage IA-400 Amp manual
14
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
SPECIFICATIONS
InstallAdvantage IA-400 Amp manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
APPENDIX A: RS-232 SERIAL OVERVIEW AND COMMANDS
Introduction
This document outlines Chrysalis’ InstallAdvantage (IA) RS-232 protocol specification. This protocol indicates how IA products receive
run-time commands from devices such as Creston Universal Remote Controls.
Com Port Setup
Use standard communications settings: Baud Rate: 9600, Data Bits: 8, Parity: None, Stop Bits: 1
IA IN and OUT Port Pin Configuration
IA serial ports use a standard configuration that allows direct connection to a PC via a FEMALE to MALE serial cable. It uses only
three pins (Transmit, Receive, Ground).
The pin configurations are:
IN:
Pin 2 = Transmit
Pin 3 = Receive
Pin 5 = Ground
OUT:
Pin 2 = Receive
Pin 3 = Transmit
Pin 5 = Ground
Runtime Command Format
Byte Number
0‘#’
Byte Description
Notes
Header Character
1 to 3 or 4
Command and
Parameter Data
3 to 4 ASCII characters see formats below
Case sensitive - CAPS ONLY!
4 or 5
‘$’
Termination Character (required or command is ignored)
InstallAdvantage IA-400 Amp manual
16
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
RS-232 Commands
Activity
Command
Format
Acceptable
n Values
Example(s)
Comments
Volume Control
#VOnn$,
#VO+$,
#VO-$,
#VO?$
00 – 80
#VO25$,
#VO+$,
#VO-$,
#VO?$
Sets volume to a value,
increments volume up
or down, or requests
current volume setting
Preset Control
#PSn$,
#PS?$
1, 2, 3, 4
#PS1$, #PS2$,
#PS3$, #PS4$,
#PS?$
Activates the indicated
preset, or requests
the current preset
Logo Light
Control
#LTn$,
#LT?$
0: Light Off
1: Light On
#LT0$
#LT1$
#LT?$
Turns the Logo Light
on or off, or requests
light state
Night Mode
Control
#NMn$,
#NM?$
0: Night
Mode Off
1: Night
Mode On
#NM0$
#NM1$
#NM?$
Activates/Deactivates
Night Mode, or
requests light
mode state
Mute Control
Power Control
#MUn$,
#MU?$
#MU0$
0: Mute Off
1: Mute On
#MU1$
#MU?$
Mutes/Unmutes the
woofer, or requests
mute state
#JUn$,
#JU?$
0: Power Off
1: Power On
#JU0$
#JU1$
#JU?$
Powers On/Powers
Off the woofer, or
requests power state
InstallAdvantage IA-400 Amp manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
CHRYSALIS PRODUCTS
BassMatrix™ Series
BassMatrix-10
BassMatrix-12
Photon™ Series
Photon-8
Photon-10
Starfire™ Series
Starfire-10
Starfire-12
InstallAdvantage Series
IA-400 Subwoofer Amplifier
IA-IWS1 (In-Wall Subwoofer)
InstallAdvantage IA-400 Amp manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . c h r y s a l i s a c o u s t i c s . c o m
FOR YOUR RECORDS. . .
Date Purchased____________________________________________________________________________
Dealer__________________________________________________________________________________
Serial #_________________________________________________________________________________
*NOTE: Please complete and return your warranty card within ten (10) days or
LIMITED WARRANTY - U.S. AND CANADA ONLY
CHRYSALIS ACOUSTICS (“CHRYSALIS”) warrants all electronics for a period of three years, drivers for a period of five years, and full
range speakers for a period of five years. All CHRYSALIS products have a warranty from the date of purchase against defects in materials and
workmanship subject to the following conditions:
1. CHRYSALIS is not responsible for defects which result from the use of an amplifier or controller other than the one originally
supplied with the unit (subwoofer) or defects which result from modifications or repairs made by any component of the system by
anyone other than a CHRYSALIS factory authorized service representative.
2. This warranty is void if any repairs or service covered by the terms of this warranty are made to any component of the system by
anyone other than a CHRYSALIS factory authorized service representative.
3. CHRYSALIS is not responsible for damage caused by accidents, abuse, misuse, natural or personal disaster or unauthorized
modification. The CHRYSALIS products are not intended for professional or commercial use and CHRYSALIS is not responsible
for damage resulting from such use.
4. The CHRYSALIS product warranty is limited to units that are purchased from authorized CHRYSALIS dealers and finalized
within authorized dealer locations.
5. This warranty is nontransferable under any condition.
6. Use of this product outside the U.S. and Canada voids this warranty.
TO OBTAIN SERVICE
Information regarding service may be obtained from the dealer from whom you purchased the unit, or by contacting CHRYSALIS customer
service. Warranty service must be performed by a CHRYSALIS factory authorized service representative within the warranty period set forth
above. If CHRYSALIS determines the unit is defective, CHRYSALIS will, at CHRYSALIS’s option, repair or replace the product at no
charge if the product is forwarded prepaid to a factory authorized service representative. Products forwarded to the factory authorized service
representative should be shipped securely and properly packaged, insured and freight prepaid.
WARRANTY OUTSIDE THE UNITED STATES AND CANADA
The Warranty of this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be
the sole responsibility of the distributor that supplied this product. To obtain any applicable warranty service, please contact the dealer from
which you purchased this product, or the distributor that supplied this product.
InstallAdvantage IA-400 Amp manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
C h r y s a l i s A c o u s t i c s
A Velodyne Company
345 Digital Drive
Morgan Hill, CA 95037
408.465.2888 voice
408.779.9227 fax
408.779.9208 service fax
w w w . c h r y s a l i s a c o u s t i c s . c o m
63-IA400 Rev A NOV09
Download from Www.Somanuals.com. All Manuals Search And Download.
|