VEC1040AMG
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those
described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in materials
and workmanship for two years from the date of purchase without additional charge. The warranty does not
extend to subsequent purchasers or users. Vector Manufacturing will not be responsible for any amount of damage
in excess of the retail purchase price of the product under any circumstances. Incidental and consequential
damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or
damage to units from misuse or incorrect installation/ connection. Misuse includes wiring or connecting to
improper polarity power sources.
RETURN/ REPAIR POLICY: Defective products, other than accessories, may be returned to Vector Manufacturing.
Any defective product, other than accessories, that is returned to Vector Manufacturing within 30 days of the date
of purchase will be replaced free of charge. If such a product is returned more than 30 days but less than two
years from the purchase date, Vector Manufacturing will repair the unit or, at its option, replace it free of charge.
100 Watt
Power Inverter
Vehicle Power System
Converts DC Vehicle Power
to 115 Volt AC Household Power
If the unit is repaired, new or reconditioned replacement parts may be used, at Vector Manufacturing’s option. A
unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced
unit will then be warranted under the terms of the remainder of the warranty period. The customer is responsible
for the shipping charges on all returned items after 30 days. During the warranty period, Vector Manufacturing
will be responsible for the return shipping charges.
lIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from normal
wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure to sunlight),
accidents, damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse,
abuse, failure to follow instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446 or
toll free at (866) 584-5504 for general repair information and charges if applicable.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on how
long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the
exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other
rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support by
telephone, fax or mail. We suggest that you keep the original packaging in case you need to ship the unit. When
returning a product, include your name, address, phone number, dated sales receipt (or copy) and a description
of the reason for return and product serial number. After repairing or replacing the unit, we will make every effort
to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
“VEC1040AMG” as Model and “100 Watt PowerInverter Vehicle Power System” as Product Type. All Vector
Manufacturing products must be registered within 30 days of purchase to activate this warranty. Mail the
completed registration form, along with a copy of the original sales receipt to:
USER’ S M ANUAL
& WARRANTY INFO RM ATIO N
IMPORTANT SAFETY INFORMATION, SAVE THESE
INSTRUCTIONS
ATTN.: CUSTOMER SERVICE
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
PH: 954-584-4446 • TOLL FREE: 866-584-5504 • Fax: 954-584-5556.
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.
BD022806
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (866) 584-5504
© 2006 VECTOR MANUFACTURING
MADE IN CHINA
8
Download from Www.Somanuals.com. All Manuals Search And Download.
It is also ideal for use with 12 volt DC cordless/portable/rechargeable DC power supplies and jump-
starter products.
SAFE – Do not use the inverter near flammable materials or in any locations that may accumulate
flammable fumes or gases. This is an electrical appliance that can briefly spark when electrical
connections are made or broken.
Estimated runtimes below are at 100 watt output:
• Jump-starters with 17-19 amp hour battery
• Compact jump-starter with 15 amp hour battery
• Compact jump-starter with 12 amp hour battery
Lower operating output (less than 100 watts) reduces the current drawn from the DC source, so
longer operating times can be realized.
approx. 2 hours
approx. 1.5 hours
approx. 1 hour
Rated Versus Actual Current Draw of Equipment. Most electrical tools, appliances,
electronic devices and audio/visual equipment have labels that indicate the power consumption in
amps or watts. Be sure that the power consumption of the item to be operated is below 100 watts.
If the power consumption is rated in amps, simply multiply by the AC volts (110) to determine the
wattage.
Resistive loads are the easiest for the inverter to run; however, it will not run larger resistive loads
(such as electric stoves and heaters) which require far more wattage than the inverter can deliver.
Inductive loads (such as TVs and stereos) require more current to operate than do resistive loads
of the same wattage rating. For safety reasons, the unit will simply shut down if it is overloaded.
To restart the unit, simply remove the load and the unit will auto reset.
O PERATIO N O F IN VERTER
1. Insert the unit into the vehicle’s (or jump-starter’s) accessory outlet.
2. Rotate the plug slightly to make sure there is good contact.
3. A green LED light on the inverter will indicate a proper operation.
Note: This inverter will not operate appliances and equipment that generate heat, such as
hair dryers, electric blankets, microwave ovens, and toasters.
4. If the inverter does not work, make sure the ignition/accessory switch is actually powering the
accessory outlet. Some vehicles need the ignition switch turned on.
5. Plug in the AC appliance.
HO W THIS IN VERTER W O RKS
This inverter is an electronic device that converts low voltage DC (direct current) electricity from a
battery to 115 volt AC (alternating current) household power. In designing this inverter, the
manufacturer has incorporated design techniques previously employed in computer power
supplies. The result of these design innovations is a smaller, lighter and easier-to-use power
inverter.
PRO TECTIVE FEATURES
The inverter monitors the following conditions:
Low Battery Voltage – this condition is not harmful to the inverter but could damage the power
source, so the inverter automatically shuts down when input voltage drops to 10.6 volts. When this
condition is corrected, the unit will auto-reset.
The inverter converts power in two stages. The first stage is a DC-to-DC conversion process that raises
the low voltage DC at the inverter input to 145 volts DC. The second stage is a MOSFET bridge stage
that converts the high voltage DC into 115 volts, 60 Hz AC.
Over Voltage Protection – the inverter will automatically shut down when the input voltage exceeds
15 volts DC.
The DC-to-DC converter stage uses creative, high frequency, zero voltage switching power
conversion techniques that replace the bulky transformers found in less technologically advanced
models. The inverter stage uses advanced power MOSFET transistors in a full bridge configuration.
This ensures excellent overload capability and the ability to operate reactive loads like lamp
ballasts and small induction motors.
Note: The inverter will auto-reset after removing a short circuit. If the inverter’s fuse fails,
disconnect the shorter load and replace the fuse inside the inverter. SEE FUSE REPLACEMENT – if
bad fuse is suspected.
O PERATIN G TIPS
The inverter should only be operated in locations that are:
In ve rte r O u tp u t Wa ve fo rm
The AC output waveform of this inverter is known as a modified sine wave. It is a stepped
waveform that has characteristics similar to the sine wave shape of utility power. This type of
waveform is suitable for most AC loads, including linear and switching power supplies used in
electronic equipment, transformers, and small motors.
DRY – Do not allow water or other liquids to come into contact with the inverter.
COOL – Surrounding air temperature should be between -20°C and 40°C - ideally between 15°C
and 25°C (60 - 80°F). Keep the inverter away from direct sunlight, when possible.
The modified sine wave produced by this inverter has an RMS (root mean square) voltage of 115
volts, which is the same as standard household power. Most AC voltmeters (both digital and analog)
are sensitive to the average value of the waveform rather than the RMS value. They are calibrated
for RMS voltage under the assumption that the waveform measured will be a pure sine wave. These
VENTILATED – Keep the area surrounding the inverter clear to ensure free air circulation around
the unit. Do not place items on or over the inverter during operation. The unit will shut down if the
internal temperature gets too hot. The inverter will auto-reset after it cools down.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
meters will not correctly read the RMS voltage of a modified sine wave. Non-TRUE RMS meters will
read about 20 to 30 volts low when measuring the output of this inverter. For accurate
measurement of the output voltage of this unit, use a TRUE RMS reading voltmeter such as a Fluke
87, Fluke 8080A, Beckman 4410, or Triplett 4200.
CO MMO N AUDIO / VISUAL PRO BLEMS
Pro b le m : Bu zzin g So u n d In Au d io Syste m s
Some inexpensive stereo systems and boom boxes make a buzzing sound when operated from the
inverter, because the power supply in the electronic device does not properly filter the modified
sine wave produced by the inverter. The only solution to this problem is to use a sound system that
has a higher quality power supply.
115 volt AC Output
Pro b le m : Te le visio n In te rfe re n ce
The inverter is shielded to minimize interference with TV signals. However, in some instances, some
interference may still be visible, especially when the TV signal is weak. Try the following to improve
the picture:
1. Move the inverter as far away as possible from the TV set, the antenna, and the antenna cables.
Use a short AC extension cord, if necessary.
2. Adjust the orientation of the antenna cables, and the TV power cord to minimize interference.
CAUTIO N : Re ch a rg e a b le De vice s
Certain rechargeable devices are designed to be charged by plugging them
directly into an AC receptacle.
•
•
•
These devices may damage the inverter or the charging circuit.
When using a rechargeable device, monitor its temperature for the initial ten
minutes of use to determine if it produces excessive heat.
If excessive heat is produced, this indicates the device should not be used with
this inverter.
This problem does not occur with most battery-operated equipment. Most of
these devices use a separate charger or transformer that is plugged into an AC
receptacle.
3. Make sure the antenna feeding the TV provides an adequate (snow free) signal and that high
quality, shielded antenna cable is used.
•
•
CO MMO N PO W ER O UTPUT PRO BLEMS
Possible Causes
Recommendations
Battery voltage
below 10 volts.
Recharge battery or check
DC power supply.
Equipment being operated
draws too much power.
Reduce load to maximum 100 watts.
•
The inverter is capable of running most chargers and transformers.
Inverter in thermal
shutdown condition.
Allow inverter to cool down. Ensure there is
adequate ventilation around unit, and load is
no more than 100 watts for continuous operation.
CARE AN D MAIN TEN AN CE
Sto ra g e
Main fuse failed (blown).
Inverter is overloaded.
Replace fuse in DC connector.
Reduce load to 100 watts max.
to maintain regulation.
1. Ideal storage temperature range is 50-68°F (10-20°C).
2. Store and use the inverter in a cool, dry place with adequate ventilation for all-around air
circulation.
3. Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive
humidity or dampness.
SPECIFICATIO N S
Power :
100 watts
115 volts, 60 Hz
Fu se Re p la ce m e n t
AC Output:
DC Input:
Fuse:
If the inverter is overloaded, and the green LED is not lit, the internal 10 amp fuse may be blown.
1. Unscrew the flange of the inverter (counterclockwise).
2. Remove the end contact, flange and fuse.
13.8 volts
10 amps
Waveform:
Modified Sine Wave
3. Inspect the fuse to see if it is good or blown.
4. Replace with a new 10 amp fuse, if needed.
5. Carefully reassemble the fuse, end contact and flange. Do not overtighten the flange (turning
clockwise).
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|