Issue 3
VP-4124D
24 VOLT DC POWER SUPPLY
SPECIFICATIONS
Input:
100-250VAC, 50/60Hz
IEC-320-C14 input receptacle
Input Current (@115V, 60Hz,
Rated Output Load): 0.93A
AC Apparent Power 107.0VA
Meets CEC 2008
Output:
24VDC, 4A Regulated
5.5mm x 2.5mm connector center
positive (mating wire assembly for
Class 2 wiring included)
Dimensions: 1.4” H x 2.65” W x 6.65” L
REGULATORY INFORMATION
(3.6cm H x 6.7cm W x 16.9cm L)
UL, cUL and CE Approvals
Weight:
1.15 lbs. (0.52 kg)
Meets VDE and FCC Class B Regulations
Mounting:
Wall or shelf, mount near an
electrical outlet (wall mount
hardware included)
TECHNICAL ASSISTANCE
When trouble is reported, verify that AC power is
being supplied to the unit. To test the power
supply, remove all output connections and
measure the output voltage with a meter. If no
voltage is measured, replace the unit.
Features:
Output voltage LED indicator
Power Cord: 6’ NEMA 5-15P (US)
6’ BS1363
6’ CEE7/7
(UK)
(EC)
FOR INDOOR USE ONLY
Assistance in troubleshooting is available from
the factory. When calling, you should have a
VOM and a test set available and be calling from
the job site. Call (540) 563-2000 and ask for
Technical Support or visit our website at
OUTPUT CONNECTIONS
Connect “+” wire to connection labeled GND
on Valcom equipment
Connect “-” wire to connection labeled -24V
on Valcom equipment
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating your
company name, address, phone number,
contact person, and the nature of the problem.
Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
1
947347
Download from Www.Somanuals.com. All Manuals Search And Download.
|