BCD436HP
and
BCD536HP
Owner’s Manual
©2014 Uniden America Corporation
Printed in Vietnam
U01UB375ZZA(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important InformatIon 1
The FCC WanTs You To KnoW 1
ModiFiCaTion noTiCe 1
ParT 15 inForMaTion 1
General PreCauTions 2
earphone Warning 2
liquid exposure Warning 2
Power disconnection Caution 2
sCanninG leGallY 2
aVis d’indusTrie Canada 3
IntroduCtIon 4
hoW does The hoMe PaTrol® WorK? 4
WhaT You hear 4
CreaTe FaVoriTes lisTs 4
aVoid TransMissions 4
rePlaY TransMissions 5
reCord TransMissions 5
maIn features 5
InCluded WIth Your sCanner 8
BCd436hP 8
BCd536hP 9
InstallInG Your sCanner 9
PoWer relaTed issues 9
ConneCTinG an oPTional anTenna 9
ConneCTinG an exTension sPeaKer 9
Base sTaTion 10
VehiCle insTallaTion 11
Mounting using the Bracket 11
Mounting using the din-e sleeve 12
removing the scanner from the din-e sleeve 13
Mounting using iso Technique 14
Connecting dC Cable with orange Wire 14
usinG inTernal BaTTeries (BCd436hP onlY) 14
using rechargeable Batteries 15
understandInG the memorY 15
FaVoriTes lisTs 15
sYsTeMs 16
TrunKinG siTes 16
deParTMenTs 16
sentInel softWare 16
Download from Www.Somanuals.com. All Manuals Search And Download.
ManaGe ProFiles 16
ManaGe FaVoriTes lisTs 16
ManaGe daTaBases 16
share FaVoriTes lisTs 16
ManaGe FirMWare uPdaTes 17
hoW To insTall senTinel soFTWare 17
uPdaTinG FirMWare 17
uPdaTinG The daTaBase 17
settInG up Your sCanner 18
Turn on The sCanner 18
KeYPad and KnoB ConTrols 19
BCd536hP 19
BCd436hP 20
CoMMon ConTrols (BCd436hP and BCd536hP) 22
set Your loCatIon and ranGe 24
seT loCaTion 24
seT ranGe 24
undersTandinG ranGe 24
ediT loCaTion 25
seleCtInG servICe tYpes 25
navIGatInG the menus 26
daTa naMinG 26
disPlaY Menu 26
a look at the display 28
seTTinGs Menu 32
adjust Key Beep 32
Battery option (BCd436hP only) 32
Band defaults 32
auto shutoff 32
set Clock 32
replay options 33
restore options 33
see scanner information 33
Keypad lock (BCd436hP only) 33
Wi-Fi seTuP (BCd536hP onlY) 33
Wi-Fi oPTions 34
KeY ConCepts 34
QuiCK KeYs 34
FaVoriTes lisT QuiCK KeYs 34
sYsTeM QuiCK KeYs 35
searCh KeYs 35
plannInG profIles 35
Download from Www.Somanuals.com. All Manuals Search And Download.
sTarTuP KeYs 35
nuMBer TaGs 35
alerTs 35
manaGInG favorItes lIsts 35
neW FaVoriTes lisT/ FaVoriTes lisT oPTions 35
ManaGinG FaVoriTes lisTs 37
undersTandinG loCaTion ConTrol 37
proGrammInG sYstems 37
neW sYsTeM/sYsTeM seTTinGs 37
sYsTeM seTTinGs 38
sYstem optIons 39
proGrammInG sItes 41
neW siTe/siTe oPTions 41
proGrammInG departments 44
neW deParTMenT/deParTMenT oPTions 44
deParTMenT oPTions 45
proGrammInG frequenCIes/tGIds 46
QuiCKlY sTorinG a FreQuenCY/TGid 46
neW Channel/Channel oPTions 46
Channel oPTions 46
set sCan seleCtIon 49
manaGInG full database 49
usInG startup KeYs 50
To use a sTarTuP KeY: 50
prIorItY sCannInG 50
PrioriTY sCan oPTions 50
sCannInG bY assIGnInG quICK KeYs 51
seleCTinG QuiCK KeYs 53
ToGGle disPlaY Modes 53
ToGGle id sCan or id searCh 54
seleCT serViCe TYPes 54
holdinG 54
rePlaY The lasT TransMissions 54
sTarT/sToP reCordinG 55
adVanCed Channel Menu 55
sTore a searCh FreQuenCY (searCh WiTh sCan) 55
aTTenuaTion 55
ModulaTion 55
Conventional Channel Modulation 55
site Modulation 55
inTerMediaTe FreQuenCY exChanGe 56
rePeaTer FreQuenCY ConVenTional Channel 56
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel VoluMe oFFseT 56
aVoidinG Channels, deParTMenTs, siTes, and sYsTeMs 56
ChanGe Your loCaTion 56
seT The ranGe 56
direCT FreQuenCY/TGid enTrY 57
usinG nuMBer TaGs 57
Close Call Modes 57
Close Call hit 58
PrioriTY Modes 58
Weather alert Priority 58
CusToM searCh BY searCh KeY 58
Close Call onlY 58
WeaTher sCan 58
Tone-ouT sTandBY/searCh 58
reVieW aVoids 58
QuiCK searCh 59
P25 adjusTMenT Mode 59
usInG a Gps 59
loCaTion-Based sCanninG 59
dIsCoverY mode 60
neW sessIon 60
session oPTions 61
start discovery 61
edit session name 61
set limit Frequencies (Conventional only) 61
set Modulation (Conventional only) 61
set step (Conventional only) 61
set delay 62
set logging 62
set Compare to database 62
set record duration 62
set Time-out Timer 62
system information (Trunking only) 62
set auto store 62
delete session 62
Change system (Trunking only) 62
revIeW dIsCoverY 63
searCh/Close Call optIons 63
searCh optIons 65
seT searCh KeY 66
searCh WiTh sCan 66
QuiCK searCh 66
Download from Www.Somanuals.com. All Manuals Search And Download.
CusToM searCh 67
Change direction or resume search 67
select Custom search Bands 67
holding 67
avoiding Frequencies 67
attenuation 67
Modulation 67
direct Frequency entry 68
Frequency intermediate exchange 68
repeater Frequency 68
replay the last Transmissions 68
start/stop recording 68
storing Frequencies 68
search Menu 68
Close Call Modes 68
Weather alert Priority Mode 68
Close Call 69
Close Call oPTions 69
Close Call only 69
hits with scan 69
set CC Mode 70
set CC Bands 70
set CC alert 70
Close Call only Mode 70
Toggle Close Call Bands 71
Cancel a hit 71
holding on a hit 71
View last hit 71
avoiding hits 71
attenuation 71
Modulation 72
intermediate Frequency exchange 72
repeater Frequency 72
replay the last Transmissions 72
start/stop recording 72
storing 72
Close Call Menu 72
Weather operatIon 72
WeaTher oPTions 72
set delay Time 73
set attenuator 73
set audio aGC 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Program saMe 73
Weather alert Priority 73
Weather scan 74
Change Channel 74
attenuation 74
intermediate Frequency exchange 74
replay the last Transmissions 74
Quick search 74
Weather Menu 74
WeaTher alerT 74
fIre tone-out 75
Tone-ouT seTuP 75
edit name 76
set Frequency 76
set Tone 76
set delay Time 76
set alert 76
set audio aGC 77
Fire Tone-ouT sTandBY/searCh 77
select a different Tone-out 77
listen to Tone-out Frequency 77
appendIx 78
TrouBleshooTinG 78
scan Mode, nothing to scan 78
scanning interrupted 78
all Channels out of range 78
deFaulT Band CoVeraGe 79
serViCe TYPes 80
reformatting the microsd Card 81
enTerinG ids 81
TYPe ii sPeCial sTaTus BiTs 82
WeaTher Channels 83
CTCss FreQuenCies 85
dCs Codes 86
reVerse lisT 86
rePeaTer FreQuenCY lisT 87
teChnICal speCIfICatIons - bCd436hp 88
teChnICal speCIfICatIons - bCd536hp 90
Download from Www.Somanuals.com. All Manuals Search And Download.
Important InformatIon
the fCC Wants You to KnoW
IMPORTANT! This scanning radio has been manufactured so that it will not tune to the radio
frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications
Privacy Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or
cordless telephone transmissions or to market this radio when altered to receive them. The
installation, possession, or use of this scanning radio in a motor vehicle may be prohibited,
regulated, or require a permit in certain states, cities, and/or local jurisdictions. Your local law
enforcement officials should be able to provide you with information regarding the laws in your
community.
Caution - FCC RF Exposure Requirements
Transmitter operating conditions: The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 7.8 in. (20 cm) from all persons
and must not be collocated or operating in conjunction with any other antenna or
transmitter
modIfICatIon notICe
Changes or modifications to this product not expressly approved by Uniden, or operation of this
product in any way other than as detailed by this Users Guide, could void your authority to operate
this product.
part 15 InformatIon
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil
ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
General preCautIons
Before you use this scanner, please read and observe the following:
Earphone Warning
You can use an optional 32Ω stereo headset or earphone with your scanner. Use of an incorrect
earphone or headset might be potentially hazardous to your hearing. The output of the phone jack
is monaural, but you will hear it in both headphones of a stereo headset.
Set the volume to a comfortable audio level coming from the speaker before plugging in the
earphone or headset. Otherwise, you might experience some discomfort or possible hearing
damage if the volume suddenly becomes too loud because of the volume control or squelch
control setting. This might be particularly true of the type of earphone that is placed in the ear
canal.
Liquid Exposure Warning
Uniden does not represent this unit to be waterproof. To reduce the risk of fire or electrical shock,
do not expose this unit to rain or moisture!
Power Disconnection Caution
IMPORTANT: Always turn the scanner off before disconnecting external power. Some
settings are saved only as the scanner is powering down.
sCannInG leGallY
Your scanner covers frequencies used by many different groups, including police and fire
departments, ambulance services, government agencies, private companies, amateur radio
services, military operations, pager services, and wireline (telephone and telegraph) service
providers. It is legal to listen to almost every transmission your scanner can receive. However,
there are some transmissions that you should never intentionally listen to. These include:
•
Telephone conversations (cellular, cordless, or other private means of telephone signal
transmission)
•
•
Pager transmissions
Any scrambled or encrypted transmissions
According to the Electronic Communications Privacy Act (ECPA), you are subject to fines and
possible imprisonment for intentionally listening to, using, or divulging the contents of such a
conversation unless you have the consent of a party to the conversation (unless such activity is
otherwise illegal). This scanner has been designed to prevent the reception of cellular telephone
transmissions and the decoding of scrambled transmissions. This is done to comply with the
2
Download from Www.Somanuals.com. All Manuals Search And Download.
legal requirement that scanners be manufactured so they are not easy to modify to pick up these
transmissions. Do not open your scanners case to make any modifications that could allow it
to pick up transmissions that are illegal to monitor. Modifying or tampering with your scanners
internal components or using it in a way other than as described in this manual could invalidate
your warranty and void your FCC authorization to operate it. In some areas, mobile and/or
portable use of this scanner is unlawful or requires a permit. Check the laws in your area. It is
also illegal in many areas (and a bad idea everywhere) to interfere with the duties of public safety
officials by traveling to the scene of an incident without authorization.
avIs d’IndustrIe Canada
Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. Son utilisation est assujettie aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil ne doit accepter tout
brouillage radioélectrique qu’il reçoit, même se lebrouillage est susceptible d’en compromettre le
fonctionnement.
Une version française de ce guide d’utilisation est disponible sur le site Web d’Uniden au :
www.uniden.com.
1.
2.
3.
4.
Sur le site d’Uniden, sélectionnez “ Support”, puis “ Owner’s Manuals”.
Au menu déroulant de sélection des produits, choisissez “Scanners”.
Sélectionnez le modèle et cliquez sur le drapeau canadien.
La version française du guide d’utilisation de ce modèle.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IntroduCtIon
The Uniden BCD536HP and BCD436HP are digital TrunkTracker V communications receivers
that require no user programming. Simply turn it on, enter your location, and you will immediately
begin hearing communications in your area. This functionality is made possible by combining
the rich radio system database from RadioReference.com with Uniden’s patented radio system
selection methods to correctly identify and monitor only nearby systems.
hoW does the home patrol® WorK?
When you set your location, the scanner searches its databases for channels near that location.
If you enter your zip code, the scanner searches within a 20 mile radius of the center of that zip
code. If you use the Auto Locate feature, that range increases to 30 miles. If you manually enter
your location or connect an optional GPS receiver, your scanner will select channels that apply to
your precise location. You can adjust the range from 0 to 50 miles.
Your scanner uses these databases:
•
Radio System Database – provided by www.radioreference.com, this database contains
radio system information including frequencies, trunked talk groups, and geographic
locations for radio systems across most of North America.
•
•
ZIP Code Geographic Database – provides geographical coordinates for most zip and postal
codes in the US and Canada.
RadioReference SysID Database – contains system ID and geographic location information
for trunked radio systems across North America.
What You hear
Your scanner has over 10,000 police, fire, ambulance, business, utility, and other agencies set for
instant access. You can also listen to weather channels and weather alerts, and you can set your
scanner to monitor weather alerts.
NOTE: There are some communications that the public is locked out from monitoring.
Your scanner cannot receive agencies that scramble their communications; it also cannot
receive agencies on private proprietary systems.
Because there are so many different kinds of communications going on, you can turn on specific
types of agencies you want to hear (and turn off those you don’t).
Create favorItes lIsts
As you find transmissions you like and would like to monitor again, you can save them to a
Favorites List. When you opt to listen to a Favorites List, your scanner will monitor only the
transmissions from that list.
You can assign a Quick Key to a Favorites List (FLQK) that allows you to quickly turn a Favorites
List on or off by simply entering the quick key on the keypad while scanning.
avoId transmIssIons
You can also select transmissions for your scanner to Avoid (ignore).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
replaY transmIssIons
Your scanner Replay feature acts as an instant replay of the transmissions you’ve just heard.
You can set how long a period Replay records for instant playback. This period can range from
30 seconds to 240 seconds (4 minutes). While you can replay that recording immediately and
continue replaying it, you cannot save it for future listening.
reCord transmIssIons
With your scanner, you can record transmissions. When you begin recording, your scanner adds
the Replay recording buffer to the recording. These recording sessions are saved and can be
replayed on demand. Rename and delete sessions through the Review Recordings submenu.
maIn features
No Programming Required – Factory programmed microSD® card for all known radio systems
in the US and Canada. The database is updatable with the Sentinel software and Uniden updates
the main database weekly.
Scan by Location – Allows you to set your location(s) by zip/postal code or GPS coordinates for
instant reception. The Auto-locate feature will find local systems if you don’t know where you are.
Favorites Scan – Allows you to organize your Systems into Favorites Lists. The scanner will scan
multiple Favorites Lists and Full Database at the same time.
4 GB microSD card (provided - supports up to 32 GB) – For storing Favorites Lists, Profiles, all
your settings, Discovery sessions, and recording sessions.
Location Based Scanning – Connect to a GPS receiver (not included) for precise system
selection and continuing reselection when you travel. The scanner can automatically Avoid and
Unavoid Systems and Departments based on your current location as provided by an external
GPS unit.
Range Control – Lets you set how far out from your current location the scanner will search for
channels in Favorites Lists and the database. Location precision for departments and sites that
allows you to define a location and range using rectangles instead just of a single circle.
Wi–Fi Dongle (BCD536HP Only) – With a WiFi app to connect your iPad/Android Tablet/
computer to remotely control the scanner.
Trunk Tracker V Operation – Scans APCO 25 Phase 1 and Phase 2, Motorola, EDACS, and LTR
trunked systems, as well as conventional analog and P25 digital channels.
Multi-Site Trunking – Lets you program the scanner to share trunked system IDs across multiple
sites without duplicating IDs.
Control Channel Only Scanning – With Motorola trunking frequencies, you do not have to
program voice channel frequencies.
Instant Replay – Plays back up to 240 seconds (4 minutes) of the most recent transmissions.
Audio Recording – Capture transmissions for later playback.
Custom Alerts – You can program your scanner to alert when you receive, a Channel or Unit ID,
a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert
in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2
flash patterns.
Multicolor LED Alert – The alert LED with 7 colors, Blue, Red, Magenta, Green, Cyan, Yellow, or
White, can be used with your Custom Alerts.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunking Discovery – Monitors system traffic on a trunked radio system to find unknown IDs and
automatically records audio from and logs new channels for later review and identification.
Conventional Discovery – Searches a range of frequencies to find unknown frequencies and
automatically records audio from and logs new channels for later review and identification.
Scan by Service Types – Scan your channels by Service Type i.e. Fire, Police, Railroad, etc.
Search Speed – 78 step/sec. (typical) in Search mode (max) except for 5 kHz steps. 250 step/
sec. (typical) in Search mode (max) – (Turbo Search) for 5 kHz steps.
Multi-Level Display and Keypad light – Makes the display and keypad easy to see in dim light
with three light levels.
Temporary or Permanent Avoid – For Systems/Sites/Departments/Channels.
System/Channel Number Tagging – Number tags allow you to quickly navigate to a specific
Favorites List, System, or Channel.
Start-up Configuration – You can program each of your Favorites Lists with a Startup Key (0-9)
so that when you power up the scanner and press the key number, just those Favorites Lists
assigned to the key will be enabled for scan.
Close Call© RF Capture Technology – Lets you set the scanner so it detects and provides
information about nearby radio transmissions. Close Call Do-not-Disturb checks for Close Call
activity in between channel reception so active channels are not interrupted.
Broadcast Screen – Allows the scanner to ignore hits on known broadcast frequencies including
pager frequencies in search and Close Call modes. You can also program up to 10 custom
frequency ranges that the scanner will ignore.
Fire Tone-Out Standby/Tone Search – Lets you set the scanner to alert you if a two-tone
sequential page is transmitted. You can set up to 32 Tone-Outs. The scanner will also search and
display unknown tones.
PC Programming – Use the Sentinel software to manage your scanners Profiles, Favorites Lists,
Databases, and firmware updates.
Analog and Digital AGC – Helps automatically balance the volume level between different radio
systems.
Priority/Priority w/DND Scan – priority channels let you keep track of activity on your most
important channels while monitoring other channels for transmissions.
Priority ID Scan – Allows you to set priority to talkgroup IDs.
Intermediate Frequency Exchange – Changes the IF used for a selected channel/frequency to
help avoid image and other mixer-product interference on a frequency.
Individual Channel Volume Offset – Allows you to adjust the volume offset for each channel.
Configurable Band Defaults – Allows you to set the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25,
50 or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.
Repeater Find – Allows the scanner to try to switch to the repeater frequency if an input
frequency is found.
Adjustable Scan/Search Delay/Resume – Set a delay up to 30 seconds or a forced resume up
to 10 seconds for each channel or search.
Data Naming – Allows you to name each Favorites List, System, Site, Department, Channel, ID,
Location, Custom Search, and SAME group, using up to 64 characters.
Duplicate Input Alert – Alerts you if you try to enter a duplicate name or frequency already stored
in the scanner.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
100 Quick Keys – You can scan Favorites Lists and Systems by assigning them to quick keys.
Search Avoids – You can temporarily Avoid up to 250 frequencies and permanently Avoid up to
250 frequencies in any Search mode or Close Call mode.
10 Custom Searches – Lets you program up to 10 custom search ranges.
Search with Scan Operation – Lets you include Custom Search ranges during scan operation.
3 Search Keys – You can assign 3 of the number keys to start a Custom Search, Tone-Out
Search, or Close Call Search.
Quick Search – Lets you enter a frequency and start searching.
SAME Weather Alert/Priority – Lets your scanner alert you when a SAME weather alert is
transmitted on a NOAA weather channel. You can also set a weather channel as a priority
channel.
Built-in Battery Charger (BCD436HP only) – Allows you to charge the batteries in the scanner.
DIN-E and ISO Vehicle Mountable (BCD536HP Only) – Using the optional DIN-E sleeve or a
standard ISO technique, the scanner can be easily mounted in most vehicles.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
InCluded WIth Your sCanner
Accessories included in the box are:
BCD436HP
BCD536HP
usB Connection Cable
aC Power adapter
3 x aa niMh rechargeable Batteries
microsd card (installed)
swivel Belt Clip (attached)
sMa-BnC antenna adaptor
rubber antenna
Cigarette lighter Power Cord
usB Connection Cable
microsd card (installed)
Wi-Fi dongle
din-e sleeve (optional accessory)
dC Cord with orange Wire
Mounting Bracket with screw and foot
Telescopic antenna
bCd436hp
8
Download from Www.Somanuals.com. All Manuals Search And Download.
bCd536hp
InstallInG Your sCanner
The BCD536HP can be placed on a convenient surface in your home as a base station, and
connected to a standard outlet that supplies 120VAC, 60Hz. You must use either the supplied
antenna or an electrically correct outdoor antenna, properly and safely mounted at your chosen
site.
The unit can also be placed above, beneath, or in the dash of your vehicle using the supplied
bracket and mounting hardware.
•
If your scanner receives interference or electrical noise, move the scanner or its antenna
away from the source.
•
Do not use the scanner in high-moisture environments such as the kitchen or bathroom.
Avoid placing the scanner in direct sunlight or near heating elements or vents.
poWer related Issues
Important: To prevent memory from being corrupted, do not unplug the AC adapter during the
time the memory is accessed for programming or auto store.
Note 1: If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner
may not power on. Should this occur, simply turn the control OFF, then ON again.
Note 2: When you turn off the scanner using the power switch, the scanner remembers the
last settings and mode. When you turn power back on, it resumes the previous mode.
ConneCtInG an optIonal antenna
The scanner’s BNC connector makes it easy to connect a variety of optional antennas, including
an external mobile antenna or outdoor base station antenna.
Note: Always use 50-ohm, RG-58, or RG-8, BNC terminated coaxial cable to connect
an outdoor antenna. If the antenna is over 50 feet from the scanner, use RG-8 low-loss
dielectric coaxial cable. Cable loss increases with higher frequency.
ConneCtInG an extensIon speaKer
In a noisy area, an optional amplified extension speaker, positioned in the right place, might
provide more comfortable listening. Plug the speaker cables 1/8-inch (3.5-mm) mini-plug into your
scanners back-panel Ext. Sp. Jack.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING! If you connect an external speaker to the scanner’s Ext. SP jack or headphone
jack, never connect the audio output line to a power supply and ground. This might
also damage the scanner.
BCD536HP Only - All audio output is Class-D amplified (PWM). Never connect Ext. SP
jack or headphone jack to an external Class-D AMP.
base statIon
This is the simplest approach to let you get started quickly. Decide on a location that is convenient
to a nearby wall outlet, has desk space to let you complete your programming worksheets, will
safely allow the indoor antenna to be extended, or near a window to use an outdoor antenna.
To secure the radio to a surface by means of the mounting bracket, follow the steps below:
1.
Attach the four protective mounting feet to the mounting bracket when you casually use the
scanner on a flat surface. Should you desire to permanently mount the scanner, remove the
feet and use wood screws through the bracket as described in Steps 2 and 3.
2.
3.
4.
Use the bracket as a template to mark positions for the two mounting screws.
At the marked positions, drill holes slightly smaller than the screws.
Align the bracket with the threaded holes on the sides of the radio case so the bracket is
beneath the radio. Secure the bracket using the two threaded knobs. Never over tighten the
knobs.
Once the radio is positioned, connect it to a source of AC power using the supplied 13.8V, 750
mA AC adapter. Insert the barrel of the AC adapter to the jack on the rear, upper right side of the
radio marked. Insert the connector of the supplied indoor telescoping antenna to the BNC Antenna
Connector and apply moderate pressure to secure it.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
vehICle InstallatIon
You can mount your scanner in your vehicle, using either the supplied bracket or the optional
DIN-E sleeve.
If the scanner loses power (as when you turn off your car’s ignition with the scanners power switch
on), it can corrupt the microSD card. To ensure that does not happen, turn off the scanner before
turning the car’s ignition off.
WARNING! AVOID AIRBAG DEPLOYMENT ZONES.
Ignoring this installation concern may result in bodily harm and the inability of the
airbag to perform properly.
Mounting Using the Bracket
With the bracket removed from the radio, use the holes in the bracket as a template to initially
mark the location you plan to use in your vehicle. Be absolutely certain of what might be behind
the mounting surface before making any holes, be it above, or below, or in front of your dash,
armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt,
consult your vehicle dealer’s service department or a qualified professional installer.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
3.
Using appropriate screws or other hardware, secure the bracket.
Insert the scanner and insert the bracket knobs to lock the scanner in position.
Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug the adapter end
into a dash mounted 12V DC socket.
4.
Attach a suitable mounted mobile antenna to the antenna jack on the back of the scanner.
Mounting Using the DIN-E Sleeve
If you are unsure about how to install your scanner in your vehicle using the optional DIN-E
sleeve, consult your automobile manufacturer, dealer, or a qualified installer. Before installing,
confirm that your scanner fits in the desired mounting area and you have all the necessary
materials to complete the task.
Your scanner requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an
additional 2-3/8 inch (60mm) space behind the unit for connectors and wires.
1.
2.
Remove the bracket if it is attached.
Remove the four Philips screws from four small tabs on the rear of the case that secure the
outer metal case and pull off the case (toward the rear) with care.
3.
4.
Install the DIN sleeve into the opening in your dashboard, lip facing out.
Push out the top and bottom tabs to hold the sleeve firmly in place.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Before inserting the scanner in the sleeve, attach the cable from the previously mounted
antenna. Attach the DC Power leads. RED goes to a positive (+) connection on your fuse
block while BLACK connects to the vehicles chassis ground (-).
Connect the ORANGE lead to one side of the headlamp switch so that when you activate
the headlights, the scanners LCD display changes intensity. Be sure all the connections are
routed away from any potentially pinching or slicing sheet metal.
7.
8.
Slowly slide the scanner into the sleeve until it locks in place.
To remove the unit, fully insert the removal keys into each slot on the left and right edges of
the front panel. Carefully slide the radio from the sleeve.
Removing the Scanner from the DIN-E Sleeve
If you plan to connect other devices or wires to the radio, such as a GPS unit, at a later time, you
should plan to remove the scanner from the DIN-E sleeve. This is easily done using the provided
Removal Keys that come with the optional DIN-E sleeve.
Refer to the illustration that follows, showing the Removal Keys.
Fully insert both Removal Keys into the slots on the left and the right edges of the radios dress
panel. You cannot remove the radio with only one key. Press in fully, and do not twist the keys.
The radio will unlock from the sleeve making withdrawal from the sleeve possible. Store the keys
in a safe place for future use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Using ISO Technique
Some vehicles can take advantage of another approach to mounting a radio in a vehicle, called
the ISO technique. However, this technique requires a very detailed and thorough knowledge of
the technique. Therefore, we strongly suggest that if you have any doubt about your experience
and abilities, please consult with a professional installer who is familiar with the ISO approach to
radio installation.
To begin the process, it is first necessary to remove the scanners outer metal sleeve from the
inner chassis. Unthread the four screws in the rear of the unit. Slide the cover toward the rear and
off. Once the sleeve is removed, you will see threaded, metric machine screw holes on either side
of the chassis cabinet. Uniden does not supply these screws. Their diameter, length, and screw
type should be chosen by a qualified installer based on the internal vehicle bracket which will be
used in securing the scanner chassis.
Once the original radio is removed from the vehicle dash and the fit of the scanner is correct,
be sure to connect all the power, audio, antenna, and any other cables or wires, to the scanner
before the scanner is secured.
The following illustration is a typical example of the ISO technique and the general side mounting
screw holes often encountered. It does not actually represent the Uniden scanner or your vehicle’s
mounting bracket. Only a professional installer will be able to determine the best and correct
approach.
Connecting DC Cable with Orange Wire
Connect this cable to the vehicle’s electric system that receives power when you turn on your
headlights. Now your scanner’s display will automatically dim when you turn on the headlights.
usInG Internal batterIes (bCd436hp onlY)
You can power your scanner using three alkaline or rechargeable AA batteries.
There is no switch for the battery type. Using non-rechargeable batteries, select “No” at the
Battery message when connecting the USB cable.
1.
2.
Install 3 AA batteries, matching the polarity symbols (+ -).
Replace the cover.
When Battery icon flashes and the scanner beeps every 15 seconds, replace or recharge the
batteries.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Rechargeable Batteries
You can also use three rechargeable batteries to power your scanner. Before you use
rechargeable batteries, you must charge them. The scanner has a built-in circuit that lets you
recharge batteries while they are in the scanner.
If the USB cable is connected to the scanner, or batteries are installed in the scanner when an
USB cable is connected, the scanner will check the battery condition.
When the scanner is turned on, the scanner does not charge the batteies.
When the scanner is turned off, the scanner will charge the batteies.
The scanner displays “Normal Charging” while charging the batteies according to the Set Charge
Time setting.
Caution: If the scanner gets too hot while charging, it will turn off automatically.
If the batteries are not installed, “No Battery” is displayed.
understandInG the memorY
All of the information contained in the scanner is stored on a microSD card supplied with the
scanner. This includes Favorites Lists, all the radio settings, and the Radio Reference database.
favorItes lIsts
Because the memory is based on the Radio Reference database we now have a different order of
organization not like banks and channels in traditional scanners, but more like Dynamic Memory
Architecture. You can now use Favorites Lists that follow RR database structure of Systems that
contain Departments that hold the Channels (conventional frequencies or IDs) and then there
are Sites to hold just the trunking frequencies. If you are familiar with DMA (Dynamic Memory
Architecture) scanners, think of departments as being like channel groups.
Favorites Lists will allow you to store channels you find when you are scanning from the full
database (the easiest way). They can contain channels from trunking systems and conventional
systems. You can also manually add systems, (not single sites), departments and channels into
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorites Lists from the database as well as program new systems, departments, sites, and
channels with the Sentinal software.
You can save up to 256 different lists in the scanner (and software) and associate them with any
or all of your profiles. You can monitor one or more lists at a time and/or the database. You can
also export you lists to a file to share them. Deleting a profile will not delete the lists associated
with a profile. However, deleting a Favorites List will delete it from all profiles.
sYstems
Systems will hold all of your Sites, Departments, and Channels.
trunKInG sItes
Inside systems are trunked sites hold the trunking frequencies for any trunking system and any
band plan information needed. You will need at least one site for each trunked system and some
systems can have several sites.
departments
Departments are also created inside systems. Departments hold frequencies (channels) for
conventional systems and IDs (also called channels) for trunked systems.
sentInel softWare
manaGe profIles
Profiles are “snapshots” of your scanner’s set up. A profile contains all your configuration settings
as well as all of your Favorites Lists, Avoids, and System settings. Sentinel can save multiple
profiles so you can also restore different profiles as you need them. For example, If you regularly
visit a specific location, you can create a profile for that location. You can save it to Sentinel to use
whenever you visit.
manaGe favorItes lIsts
You can create Favorites Lists in Sentinel and then associate them with specific profiles. Sentinel
allows you to create your own systems, or edit systems already in a Favorites list. These systems
can include information not provided by the weekly database downloads. When those profiles are
written to your scanner, only specified Favorites Lists are written to the scanner.
manaGe databases
Uniden updates the Database used in your scanner every week. You can decide how often you
want to update the databases on your scanner. When you update them through Sentinel, it checks
the website for the most current database and saves it in Sentinel. When you select Write to
Scanner, the new database is updated in the scanner.
share favorItes lIsts
Create and share Favorites lists with your friends or others in the HomePatrol® Community at
http://www.HomePatrol.com and the HomePatrol Twiki site at http://info.uniden.com/HomePatrol
for Favorites Lists that cover common services such as Railroad, Marine Radio, Civilian and
Military Air bands, and more.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
manaGe fIrmWare updates
For information about what is included in each update, see:
•
•
http://info.uniden.com/UnidenMan4/BCD536HP, or
http://info.uniden.com/UnidenMan4/BCD436HP.
hoW to Install sentInel softWare
If you have not already installed Sentinel software, follow these procedures.
1.
2.
3.
4.
5.
6.
7.
8.
Use the USB cable to connect your scanner to your PC.
Turn on the scanner if it is not already on. Select Mass Storage.
USB Mass Storage displays while it is connected to the PC.
The microSD card in your scanner will install to your PC like an additional drive.
Open the drive folder and Double-click setup.exe in the Setup folder.
When installation is complete, Sentinel software is installed on your PC.
You can now disconnect the USB cable.
Sentinel will automatically notify you if a more recent version is available.
updatInG fIrmWare
Your scanner updates its firmware through Sentinel. In that process, Sentinel connects to the
internet and checks for the current firmware version to download.
From time to time, Uniden will release firmware updates to improve existing functionality, add new
features, or address issues found in its operation. Updating the firmware takes just a few minutes
and is easily accomplished using the Sentinel Software you installed on your PC.
Simply connect your scanner to your PC using the supplied USB cable and select Mass Storage.
Then, in Sentinel select UPDATE/Update Firmware and follow the on-screen prompts.
updatInG the database
1.
To update the scanner’s database, connect it to your PC using the supplied USB cable.
Select Mass Storage.
2.
3.
Next, in Sentinel, select UPDATE/Update Master HPDB.
Finally, write the new database to your scanner by selecting Scanner/Write to Scanner.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
settInG up Your sCanner
turn on the sCanner
Scroll
Control
Squelch
Volume
Func
Menu
BCD536HP
BCd436hP
For Model Number
BCd436hP
Procedure
for about 2 seconds.
If the screen is too dark, tap to turn on the backlight.
1.
Press and hold
2.
3.
Press the scroll control to display the volume level. Turn the
scroll control (within 10 seconds) to adjust the volume.
4.
5.
Press the scroll control again to close the volume level (or let
it disappear after 10 seconds).
Press Func then press the scroll control to display the
squelch level. Turn the scroll control counter-clockwise all
the way then clockwise until the noise stops, then one notch
more.
6.
1.
Press the scroll control again to close the squelch level.
Rotate VOL clockwise and set the volume to around 10
BCd536hP
o’clock.
2.
Rotate the SQ knob counter-clockwise all the way, and then
rotate the VOL knob to find a comfortable volume level.
Rotate the SQ clockwise until the noise stops, then one notch
more.
The first time you turn on your scanner it will prompt you to set the clock. See Setting the Clock.
To begin scanning right away, press the Zip button to select your country and zip/postal code (See
Data Naming to enter postcode). The scanner will load channels for your area from the database
and start scanning.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
KeYpad and Knob Controls
BCD536HP
Key
Operation
Power/Vol light
•
•
•
Turns the scanner on/off and adjusts the volume
Press func then Vol to view P25 adjustment mode
Press to toggle backlight intensity
•
•
•
•
Turn to adjust the squelch
sQ
Press to toggle Close Call modes
Press and hold to enable Close Call only mode
Press func then sq to start Fire Tone-out standby search
scroll Control/Function
•
•
•
•
•
•
Press to enter Function mode for 3 seconds
Press to select a menu item or save an entry in menu mode
Turn to select a menu item in menu mode
Turn to set decode threshold in P25 adjustment mode
Turn to select characters with data naming
Turn to select scan/search direction and to continue scan/search in
scan/search modes
•
•
•
•
•
Turn to scroll Channels or Frequencies in hold modes
Turn in department Pause to scroll departments
Turn in system Pause to scroll systems
Turn in site Pause to scroll site in current system
Turn in search Pause to select Custom search Banks to enable in search
mode
•
•
•
•
•
•
Turn to select next or previous recording in replay mode
Turn to resume Close Call search in Close Call mode
Turn to start a Quick search hold mode in Close Call hold mode
Turn to select next Weather Channel in Weather scan
Turn to select Tone-outs in Tone-out standby/search mode
Press func then avoid to review avoids in the current system in scan
mode
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
Operation
avoid
•
•
Press to return to previous mode in Menu mode
Press to toggle Channel/Frequency avoid status in receive/hold
modes
•
•
Press to toggle avoid status in system, department, or site Pause
Press and hold to clear all system/site/department/Channel avoids in
current systems in scan hold mode
•
•
•
Press and hold to clear search avoids in search hold mode
Press func then avoid to review all search avoids in search modes
Press func then avoid to review avoids in current system in scan
mode
Press to enter country-zip/postal code.
Press to select Service types.
Press to select Range.
Zip
serv
rang
BCD436HP
Scroll
Control
Func
Menu
Key
Operation
Power/light/lock
•
•
•
Press and hold to turn the scanner on or off
Press to use the backlight
Press func then
to lock or unlock the keypad
func (Function)
Press to enter Functin mode for 3 seconds
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
Operation
scroll Control (Volume,
•
Press then turn to adjust volume level in scan mode
squelch)
•
•
•
•
•
Press func then Vol turn to adjust the squelch
Press Vol then func then Vol to view P25 adjustment mode
Press to select a menu item or save an entry in menu mode
Turn to select characters with data naming
Turn to select scan/search direction and to continue scan/search in
scan/search modes
•
•
•
•
•
Turn to scroll Channel or Frequency in hold mode
Turn in department Pause to scroll departments
Turn in system Pause to scroll systems
Turn in site Pause to scroll site in current system
Turn in search Pause to select Custom search Banks to enable in search
mode
•
•
•
•
•
Turn to select next or previous recording in replay mode
Turn to resume Close Call search in Close Call mode
Turn to start a Quick search hold mode in Close Call hold mode
Turn to select next receivable Weather Channel in Weather scan
Turn to select Tone-outs in Tone-out standby mode
•
•
Press to return to previous mode in Menu mode
avoid
Press to toggle Channel/Frequency avoid status in receive/hold
modes
•
•
Press to toggle avoid status in system, department, or site Pause
Press and hold to clear all system/site/department/Channel avoids in
current systems in scan hold mode
•
•
•
Press and hold to clear search avoids in search hold mode
Press func then avoid to toggle Close Call modes
Press func then press and hold avoid to enable Close Call only mode
Zip/services
•
•
Press to enter country-zip/postal code
Press func then Zip to select service Types
21
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMON CONTROLS (BCD436HP and BCD536HP)
system
•
•
Press func then system to start scan mode
Press to enter system Pause for 2 seconds then hold on a system in
scan mode
•
•
•
double-press system for hold without pause in scan mode
double-press to release system hold
Press to enter search Pause mode for 2 seconds then hold on a search
in search mode
•
•
double-press for search hold without pause in search mode
Press to release search hold
department
•
Press to enter department, pause for 2 seconds, and then hold on a
department in scan mode
•
•
•
double-press department for hold without pause in scan mode
double-press to release department hold
Press to enter search Pause mode for 2 seconds then hold on a search
in search mode
•
•
•
double-press for search hold without pause in search mode
Press to release search hold
Press func then department to hold/release site in scan mode
Channel
•
•
Press to hold/release a Channel, Frequency, CC hit, Tone-out
Press func then Channel to toggle Modulation for Channel, site, or
search, in hold modes
•
Press to pause in replay mode
Menu
•
•
•
•
•
•
Press to enter Menu mode
Press to return one level in Menu mode
Press func then menu for search menu in search mode
Press func then menu for Close Call menu in Close Call mode
Press func then menu for Weather menu in Weather scan
Press func then menu for Tone-out menu in Tone-out
replay/record
•
•
•
Press to replay the last transmissions
Press func then replay to start/stop recording
Press and hold to review recordings
22
Download from Www.Somanuals.com. All Manuals Search And Download.
number keys
•
•
•
Press to select Favorites lists in scan mode
Press 0-9 to use direct entry in hold mode
Press 0-9 to toggle custom search bands on or off in Custom search
mode
•
•
•
•
Press 0-6 to toggle Close Call bands on or off in Close Call mode
Press func then 1, 2, or 3 to enable search keys in hold mode
Press <4 to move the cursor to the left when editing text
Press func then 4(aTT) to toggle channel/search/CC attenuation on/off
in hold mode
•
Press func then press and hold 4(aTT) to toggle Global attenuation on/
off in hold mode
•
•
•
•
•
Press func then 5( ) to enter Wi-Fi menu (BCd536hP only)
Press 6> to move the cursor to the right when editing text
Press func then 6(wx) to toggle Weather alert Priority in hold modes
Press func then press and hold 6(wx) to enter Weather scan
Press func then 7(iFx) to toggle intermediate frequency exchange for a
channel/frequency in hold modes
•
•
•
Press func then press and hold 8(reV) to view the repeater frequency
in search mode
Press func then 9(dIsp) to toggle 3 lline display mode on/off in scan
hold mode
Press func then 0(lVl) to toggle the volume offset for a channel in scan
hold mode
/no/Pri
•
•
•
•
•
•
•
Press to enter a decimal point for a frequency
Press to delete current character with data naming/direct entry
Press to cancel Confirm? prompt
Press twice to delete all characters with data naming/direct entry
Press twice to enter a hyphen when entering an id
Press to enter an‘i’when entering an i-Call id
Press func then /no to toggle Priority modes in scan mode
e/yes
Q srCh
•
•
•
•
•
•
•
Press to select a menu item or save an entry in menu mode
Press to store a blinking CTCss/dCs/naC tone in scan mode
Press to store an id in id search mode in scan mode
Press for advanced Channel Menu in hold/receive modes
Press to‘quick store’a frequency in search modes
Press func then e/yes to start Quick search mode
Press func then e/yes to toggle id search mode on/off in scan mode
(when scanning Trunked system in Favorites list only)
•
•
Press to store found tones in Tone-out search mode
Press to select the current Tone-out menu in Tone-out mode
23
Download from Www.Somanuals.com. All Manuals Search And Download.
set Your loCatIon and ranGe
Press Menu then scroll to Set Your Location and press E/yes.
Scroll to through the following option and press E/yes.
set loCatIon
Enter Zip/Postal Code – This will set the center of a zip/postal code as your location (not your
exact location) and a default scan range of 20 miles.
You can then set the range, edit the location name, and save the location.
Select your country (USA or Canada) and press E/yes.
Enter your zip code or see Data Naming to enter a post code.
Note: You can also press the ZIP button to tenter your zip/postal code.
Auto Locate – The Auto Locate feature works by trying to monitor any Motorola or P25 system in
your area that is also in the Radio Reference Database.
The scanner will then set your location based on the system(s) it receives.
This will set the center of the discovered radio tower as your location (not your exact location) and
a default scan range of 30 miles.
You can then set the range, edit the location name, and save the location.
Press E/yes or ./no to accept the location. Press Menu to cancel.
Set Manual Location – This will set your exact location and a default scan range of 0 miles. You
can then edit the location name and save the location.
Input Latitude. Using the keypad, enter your latitude.
Press ./no to toggle N or S, and press E/yes.
Input Longitude. Using the keypad, enter your longitude.
Press ./no to toggle E or W, and press E/yes.
Set Up GPS – Sets the location format, serial port baud rate, and units.
Location Format
DMS:DDD˚MM’SS.ss or DEG:DDD.dddddd.
Set Serial Port. Default is 4800 bps for GPS device.
Off, 4800, 9600, 19200, 38400, 57600, or 115200 bps.
set ranGe
Set Range – This setting allows you override the default range setting for your current location
to increase or decrease the number of Trunking Sites and Channel Departments you can receive
when you are scanning from the Full Database and when you are scanning Favorites Lists with
Location Control enabled. See also Understanding Range.
Enter the range (0-50) and press E/yes.
Note: (BCD536 Only) You can also press RANG to enter your range.
understandInG ranGe
1.
The range setting will only work with Favorites Lists that have Location Control set to On and
with Departments/Sites that have locations programmed. Everything in the Full Database
also has locations programmed. If you manually program Departments/Sites with no location
24
Download from Www.Somanuals.com. All Manuals Search And Download.
information included, the range setting will have no effect on them because the scanner
doesn’t know where they are.
2.
3.
You will receive Departments/Sites that have a range equal to your scan range setting plus
the programmed range of the Departments and Sites. For example, if your scan range is set
to 10 miles and a Department/Site range is set to 30 miles, and that Department/Site is less
than 40 miles away from your current location setting, it will be enabled in your Favorites List
according to both range settings.
If you use Add Current dB Channels from a list with a 10 mile range (selected location by
zip/postal code) and then set the range to 20 miles, Location Control will not add the other
channels included that extra 10 mile range.
edIt loCatIon
This allows you to create a location or edit a location for rapid recall.
New Location or Edit Location
Edit Name. See Data Naming.
Use Location. This will set the location as current for scanning the Database and
Favorites Lists with Location Control enabled.
At Confirm? Press E/yes or ./no.
Delete Location. You can only delete saved locations. The last location set will be
retained for use when scanning the Database.
At Confirm Delete?, press E/yes or ./no.
Set Location Information. See Set Manual Location.
Set Range. Enter the range (0-50) and press E/yes.
Save Location – This will save the current location, the range, and set the location as current for
scanning the Database and Favorites Lists with Location Control enabled.
See Data Naming to name the location.
seleCtInG servICe tYpes
Not all service types are enabled when you set your location in the scanner. By default only EMS
Dispatch, Fire Dispatch, Law Dispatch, Custom 1, and Multi-Dispatch are enabled.
The Appendix has a list of Service Types and their general descriptions.
(BCD536HP) Press the Serv button.
(BCD436HP) Press Func then the Zip/Services button.
Scroll to each Service Type and press E/yes to enable or disable.
Press System to exit.
When the scanner displays a Service Type that is not in the Favorite Lists, the scanner will display
a “---” indication.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
navIGatInG the menus
The Menu key lets you select options to set up and use the scanner. To select a menu item, rotate
the scroll control. Rotate right for down and left for up.
The currently-selected menu item is highlighted and reversed in the display. When the menu item
you want to select is highlighted, press E/yes or the scroll control to select it. To back up a level,
press Menu.
To exit all menus and return to the previous mode, press Avoid.
data namInG
Name any Favorites List, System, Site, Department, Channel, Location, Custom Search,
Recording Session, Tone-Out, or SAME group using up to 64 characters.
To Enter a Character, turn the scroll control until the character you want appears.
To move the cursor to the right, press 6>.
To move the cursor to the left, press <4.
To clear a character, press ./no.
To clear all characters, press ./no twice.
Press E/yes when finished to exit.
dIsplaY menu
Press Menu and then scroll to Display Options and press E/yes.
Scroll to the options below and press E/yes.
set backlight
adjust Contrast
disp unit Id
set Id format (mot/p25)
set Id format (edCs)
set upside-down (bCd536hp only)
Setting the Backlight – The scanner will turn on/off the LCD and the Keypad backlight
automatically according to backlight setting.
Set Mode
Note: (BCD536HP Only) Keypress and Squelch settings will work only when the backlight
is Off.
Squelch
Off - The backlight stays off when the squelch opens.
5 sec - The backlight stays on 5 seconds after the squelch opens.
10 sec - The backlight stays on 10 seconds after the squelch opens.
Open Squelch - The backlight stays on only when the squelch is open.
Keypress
Off - The backlight stays off when any key is pressed.
5 sec - The backlight stays on for 5 seconds when any key is pressed.
10 sec - The backlight stays on for 10 seconds when any key is pressed.
Timeout (BCD436HP Only)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
10 sec - Turns the backlight on for 10 seconds when you press
30 sec - Turns the backlight on for 30 seconds when you press
60 sec - Turns the backlight on for 30 seconds when you press
Infinite - The backlight always stays on.
.
.
.
Set Dimmer (BCD436HP Only)
High, Middle, or Low
Set Dimmer (BCD536HP Only)
Manual (For non-vehicle use) - High, Middle, Low, or Off.
Note: You can also toggle the backlight brightness by pressing Vol.
Auto (For vehicle use)
+ Polarity - If the orange wire gets 12V when you turn on the headlights.
- Polarity - If the orange wire is switched to chassis ground when you turn on the
headlights.
Adjust Contrast – This setting controls the displays contrast.
Contrast 1-15
Display Unit ID – Allows you view the unit ID of the radio currently transmitting on Motorola,
EDACS, and APCO P25 systems.
On or Off
Set ID Format – Sets the ID display format for the System.
Set ID Format (Mot/P25)
Decimal Format or Hex Format. The default setting is Decimal.
Set ID Format (EDACS)
AFS Format or Decimal Format. The default setting is AFS.
Set Upside-Down (BCD536HP Only) – This allows you to reverse the display so you can mount
the scanner upside-down and hear the speaker from the top. The default setting is Off.
On or Off
Selecting 3-Line Display Mode
Hold on any channel and press Func then 9(DISP). Press Channel to resume.
3-Line Display Oꢀ
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Line Display On
View the Battery Level (BCD436HP Only)
To view the battery level (in volts) press the scroll control and look at the small numbers in the
upper right of the display. Press the scroll control again to close the battery level or let it disappear
after 10 seconds.
A Look at the Display
Scan Mode
Searching
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume and Squelch
displays to show Function mode
F0-9
indicates the first digit of the Favorites list quick key on the left with the blinking
second digit on the right in scan mode
a non-blinking number on the right indicates the quick key is enabled waiting to be
scanned
a - (dash) means nothing is assign to the quick key
an * (asterisk) means the quick key is disabled
siTe hold
searCh
Time
displays in site hold mode
displays in search mode
displays the time
↑ or ↓
GPs
displays to show the scan or search direction
displays when connected to a GPs unit
displays when recording
reC
displays to show Wi-Fi status is not connected (BCd536hP only)
displays to show Wi-Fi status is connected (BCd536hP only)
aP
displays when connected in access Point mode (BCd536hP only)
displays to show the signal strength
displays in Priority mode
displays in reverse in Priority dnd mode
displays and blinks if the battery is low (BCd436hP only)
displays if the Close Call Priority feature is on
displays in reverse in Close Call dnd mode
s=nn
displays the squelch level for three seconds when you turn sQ
Battery level
displays when you press Vol (BCd436hP only)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
s0-9
display the first digit of the current system quick key on the left with the blinking
second digit on the right
a non-blinking number on the right indicates the quick key is enabled waiting to be
scanned
a - (dash) means nothing is assigned to the quick key
an * (asterisk) means the quick key is disabled
0-9 displays the Custom search key status in search mode
date
displays the date
Receive
Mode
receive mode in Function mode
Volume
Offset
Volume offset for the channel in Function mode
IFX
displays if intermediate exchange is enabled for the channel
aTT
displays to show channel attenuation in receiving/hold modes and in search mode
to show search attenuation
aTT blinks to indicate global attenuation
P25
lnK
daT
enC
displays if the channel is receiving digitalized voice in receiving or hold modes
displays when data is received on a voice channel in receiving or hold modes
displays when data is received on a control channel in receiving or hold modes
displays if the channel is receiving encrypted voice and is muted in receiving or
hold modes
Wx
displays if the Weather alert Priority feature is on
displays the volume level for three seconds when you turn vol
displays in receiving/hold modes
V=nn
system name
avoid/hold
Temporary avoids appear reversed -
search with
displays to show a custom search in scan mode
scan
Custom search displays in search mode
name
department
name
avoid/hold
status displays in receiving/hold modes
Temporary avoids appear reversed -
displays for a conventional system in scan mode
displays for a system in receiving/hold modes
Custom search displays in search with scan mode
name
site name
displays for a trunked system in scan mode
department
displays the department name
name
search
displays in search mode
Frequency
Modulation
displays in search mode
scanning
displays for a conventional system in scan mode
30
Download from Www.Somanuals.com. All Manuals Search And Download.
id scanning/
displays for a trunked system in scan mode
searching
Channel name displays in receiving/hold modes
displays when receiving a priority channel in receiving/hold modes
Channel
displays in receiving/hold modes
service Type
TGid
displays in receiving/hold modes for a trunked site with display unit id set to on
Tone/Code
displays for a conventional channel in receiving/hold modes
Blinking Tone/Code indicates a Tone/Code search
****** indicates Tone/Code lockout
Channel name displays a channel’s avoid/hold status
avoid/hold
Temporary avoids appear reversed -
unit id
displays in receiving/hold modes for a trunked site with display unit id set to on
displays in receiving/hold modes for a trunked site with display unit id set to off
display for a conventional channel in receiving/hold modes
TGid
Frequency,
Modulation
Favorites list
displays in scan mode
name
Full database
displays in scan mode
sCr
displays if one or more broadcast/custom screen bands are turned on in receiving/
search mode
reP
displays if repeater Find is enabled in receiving search modes
number Tag
displays in Function mode for a Favorites list
information
31
Download from Www.Somanuals.com. All Manuals Search And Download.
settInGs menu
Press Menu then scroll to Settings and press E/yes.
Scroll to the options below and press E/yes.
adjust Key beep
auto shutoff
restore options
battery option
set Clock
see scanner Information
bCd436hp only
band defaults
replay options
Keypad lock
(bCd436hp only)
Adjust Key Beep
Allows you to turn the key beep on or off and adjust the volume level.
Auto sets the alert beep to the master volume level.
Off, Level 1-15, or Auto
Battery Option (BCD436HP Only)
Set Battery Save. On or Off.
Set Charge Time. 1-14 (hours). See also Using Rechargeable Batteries.
Set Battery Low
Set Alert
Set Alert Tone. Change tone frequency. (640 Hz, 780 Hz, 920 Hz, 1060 Hz, 1200 Hz)
Set Alert Interval. Set to a value between 1 and 60 seconds. (Default is 15 sec.)
Set Alert Volume. 1-15, Off, or Auto. (Default is Auto)
Set Voltage. 3100 - 3400mV. (Default is 3300mV)
Band Defaults
Use this menu to change the default modulation and frequency step or spacing used for each
band.
Scroll to each band you wish to edit and press E/yes. See also Default Bands.
Set Modulation
AM, NFM, FM, WFM, or FMB (Broadcast).
Set Step
5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz.
Auto Shutoff
Allows you to set the scanner to shut off after a set time.
Off, 5, 10, 15, 30, 45 min, 1, 2, 3 hours.
Set Clock
Sets the clock for the display and the default tag for recordings.
Set Date
Set Year. Enter the year (2013-2099).
Set Month. Enter the month.
Set Day. Enter the day.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Time
Set Hour. Enter the Hour (0-23).
Set Minute. Enter the minute.
Set Time Zone
Scroll to your time zone.
Set Daylight Saving
On or Off
Replay Options
This allows you to set the recording duration and delete, replay, or rename recording sessions.
Set Replay Duration
30, 60, 90, 120, 150, 180, 210, or 240 sec.
Review Recordings
Recording Session
Play Session. See Replaying Transmissions.
Delete Session
At Confirm Delete? Press E/yes or ./no.
Rename Session. See Data Naming.
Restore Options
Allows you to clear all user data (full reset) or reset just scanner settings to default.
Clear User Data
(Full Reset) will delete all Favorites Lists, locations, reset all profile options to default,
clear all Avoids, delete all recording sessions, all discovery logs, and all weather event
records.
Note: Pressing and holding 2, 9, and Dept when you power on the scanner will also clear
all user data.
Reset User Settings
Will only reset all scanner settings; the Favorites List will be saved.
See Scanner Information
This will show you how much memory is in use, the firmware version, and scanner serial number.
Keypad Lock (BCD436HP Only)
The only keys/knobs that work when the keypad is locked are Channel for hold mode,
,
Func, and the Scroll Control for volume.
Press Func then
to toggle the keypad lock.
WI-fI setup (bCd536hp onlY)
The Wi-Fi dongle allows you to connect to the scanner wirelessly and control your scanner with
the Remote software.
The scanner has two different Wi-Fi connection modes - Infrastructure mode and Access Point
mode.
Infrastructure Mode is able to connect to an Access Point device.
With this mode, all you need to do is a set a password. In a few cases, there is no password
needed with the Access Point unit.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Point Mode is able to connect with up to 5 clients.
Setting parameters are as follows: SSID, Security type, and Password.
Wi-Fi OPTIONS
Make sure the Wi-Fi dongle is connected to the USB port behind the scanner.
Press Menu then scroll to Wi-Fi Setup and press E/yes.
Show Wi-Fi Information
Shows the IP address, MAC number, and version when connected.
Shows ‘Wi-Fi not connected’ when the WiFi dongle is not connected.
Set Connection
Off. Not connected.
Infrastructure Mode. Routers etc.
Select AP. Select the access point with the encryption type.
Input Password. Input password to connect.
Access Point Mode. Laptops, Smart devices etc.
Input SSID
Enter (or use default) name of connection. See Data Naming.
Select Security
Open, WPA/WPA2
Input Password. Enter the password for connection.
Reset to Factory
Initialize information for WiFi Setup.
KeY ConCepts
quICK KeYs
Organizing your Quick Keys will be part of the planning. You will have to figure out which quick
keys to assign to your Favorites Lists and Systems so you can scan them without a table of
contents and with some sort of logic you can remember. Remember, enabling/disabling quick keys
is not the same thing as Avoiding or Unavoiding Systems and Monitor On/Off Favorites Lists.
favorItes lIst quICK KeYs
Favorites Lists Quick Keys are used to enable or disable Favorites Lists for scanning. They are
just the number keys on the scanner but once assigned to a Favorites List they become the Quick
Keys. Your Favorites Lists hold your Systems that also may have System quick keys assigned
to those Systems. You cannot assign a Quick Key in one Favorites List to another Favorites List.
Selecting a Favorites List will enable all (Unavoided) Systems in that list for scanning. There
are 100 Quick Keys (0-99) to use for your Favorites Lists. Favorites List Quick Keys can only be
assigned once to any one Favorites List, If you don’t assign a Quick Key to a list, it will always be
enabled.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
sYstem quICK KeYs
System Quick Keys are used to enable or disable conventional and trunking systems for scanning.
You can assign any quick key to one or more Systems, or program one or more systems with no
quick key assigned that will always be scanned unless you Avoid it. There are also 100 Quick
Keys (0-99) to use for your Systems.
It is best to assign Quick Keys to everything to easily access your Favorites List and System. See
also Scanning and Quick Key scanning order.
searCh KeYs
You can assign any Search Keys (1, 2, or 3) to any Custom Search range, Tone-Out Search, or
Close Call Only Search for quick access to your favorite searches.
plannInG profIles
startup KeYs
You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power
up the scanner and press the key number, just those Favorites List(s) assigned to the key will be
enabled for scan. Systems are not affected.
number taGs
Numbers tags will allow you to tag each Favorites List, System, and Channel to locate easier.
Number tags can range from 0 to 99 for Favorites Lists and Systems and 0-999 for Channels.
You can assign number tags to channels even if the Favorites List does not have a number tag
but, without a Favorites List number tag, you can only navigate to these channels while holding or
scanning in that Favorites List. See also Using Number Tags.
alerts
You can program your scanner to alert you when, a Channel or Unit ID is received, you receive
a Close Call hit, an ID is transmitted with an Emergency Alert or you receive a Tone-out hit. For
each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7
colors, and 3 color patterns.
manaGInG favorItes lIsts
Favorites Lists hold all your Systems, Sites, Departments, and Channels. You should assign a
Quick Key to every Favorites List to quickly enable or disable the list. You can assign a Favorites
List to a Favorites List Quick Key.
neW favorItes lIst/ favorItes lIst optIons
Press Menu then scroll to Manage Favorites and press E/yes.
To Create a New Favorites List, scroll to New Favorites List and press E/yes.
To Edit a Favorites List, scroll to the Favorites List and press E/yes.
Scroll to the options below and press E/yes.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
review/edit system
set fl quick Key
set fl number tag
det fl startup Key
use location Control
review avoids
add Current db Channels
rename
delete
Information
stop all avoiding
Review/Edit System – See Programming Systems.
Set FL Quick Key – This assigns a quick key to the Favorites List and will scan the list when the
key is enabled. The default setting is . (no quick key). If you don’t assign a Favorite Lists to a quick
key, it will always be scanned unless you turn it off in Select Lists to Monitor. See also Select Lists
to Monitor.
Scroll to the quick key number (0-99 or . for no quick key) and press E/yes to save.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set FL Number Tag – This allows you to number a Favorites List so you can access it quickly
from scan hold mode.
The default setting is no number tag. See also Using Number Tags.
Enter the number tag (0-99) and press E/yes to save. Enter a blank for no number tag.
Set FL Startup Key – This allows you to turn on the scanner with the Favorites List enabled for
scan. The default settings are all keys Off.
See also Using Startup Keys.
Scroll to each key (0-9) and press E/yes to enable then press Menu to save.
Use Location Control – This enables Location Control for the Favorites List. The default setting
is Off. See also Understanding Location Control.
Review Avoids – This allows you to review all Avoids for the Favorites List. Temporary Avoids
appear reversed in the display -
.
Scroll to each Avoided channel, Department, or System, and press E/yes to Stop Avoiding.
Stop All Avoiding – This will Stop Avoiding all Channels, Departments, and Systems in the
Favorites List.
At Confirm Delete? Press E/yes or ./no.
Add Current dB Channels – This allows you to add all channels you are currently scanning to
the Favorites List.
At Confirm? Press E/yes or ./no.
Note 1: Any Avoided Channel will not be added.
Note 2: When adding channels from the Full Database, only channels that are inside the set
range, and from the selected Service Types are added.
Note 3: When adding channels from a Favorites List that has ‘Use Location Control’ is set
to Yes, only channels that are inside the set range, and from the selected service types are
added.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Note 4: When adding channels from a Favorites List that has Use Location Control is set to
No, only channels that are from the selected service types are added.
manaGInG favorItes lIsts
Rename – This allows to you rename the Favorites List.
See Data Naming.
Delete – This will delete the Favorites List.
At Confirm Delete? Press E/yes or ./no.
Information – This will show you the file size and number of Systems in the list.
understandInG loCatIon Control
Location Control allows you to enable or disable channels scanned in a Favorites List based
on your location. Actually, it enables/disables Sites and Departments in Favorites Lists (as long
as they have locations programmed) based on your current location and scan range settings.
Location Control is always enabled when scanning from the Full Database.
To use Location Control, you have to enable it for each Favorites List (default is OFF). You also
need to have locations programmed for Sites and Departments in each list (you can’t program a
location for a system).
With Location Control set to ON, the scanner only sees Departments/Sites with programmed
locations. Any Department/Site with no location information programmed will not be scanned. If
you append (add) a System/Department to a list from the database, the locations will be brought
in with each System/Department you append.
With Location Control set to OFF, the scanner will enable all Sites and Departments in your
Favorites List no matter what the scan range or Site/Department range is set to.
You don’t need a GPS to scan by location if all of the following apply:
1.
You have Location Control set to ON for each Favorites List you want to use with Location
Control.
2.
3.
You set (by zip/post code, Auto Locate, or manually), or select a location.
Your Departments and Sites have locations programmed.
The scanner then compares your location data with Site and Department data to determine which
channels to scan.
Conceivably, you could program everything you want to hear into one Favorites List and scan just
by selecting locations rather than enabling/disabling lists. If you are traveling long distances a
GPS device would be a better way to go.
proGrammInG sYstems
Note for Motorola/P25 systems: If you are not sure if the system is Motorola or P25, look
at the system type in the RR database for your system. Only those systems tagged as
“Project 25 Phase I or Project 25 Phase 2” are Project 25 systems. Any system type that
includes the word “Motorola” should be programmed as a Motorola system, even if it uses
some or all digital channels.
neW sYstem/sYstem settInGs
Press Menu then scroll to Manage Favorites and press E/yes.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
To Create a New System, scroll to New System and press E/yes.
Scroll to P25 Trunk, P25 X2-TDMA, P25 One Frequency, Motorola, EDACS, LTR, or
Conventional and press E/yes.
At Confirm? press E/yes or ./no.
To Edit System Settings, scroll to the System and press E/yes.
sYstem settInGs
edit name
Copy system
edit unit Id
edit system
Edit Name – Enter a name and press E/yes. See Data Naming.
Edit Unit IDs – Unit ID must be set to On in the Display Options menu to view Unit IDs.
New Unit ID/Edit Unit ID
Enter the Unit ID and press E/yes.
Edit Name See Data Naming.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Delete Unit ID
At Confirm Delete?, press E/yes or ./no.
Copy System – Copying a system will copy all Sites, Departments, Channels, and settings
including quick key assignments into the current Favorites List.
See Data Naming to name the new system.
Delete System
At Confirm Delete?, press E/yes or ./no.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
sYstem optIons
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System you want to edit and press E/yes.
Scroll to Edit Sys Option and press E/yes.
Note: Not all options will appear for all types of systems.
set quick Key
set number tag
set avoid
priority Id scan
set status bit
Clear all Id avoids
set audio aGC
set end Code
p25 naC option
set hold time
Id search
emergency alert
review Id avoids
p25 Waiting time
p25 threshold mode
p25 threshold level
edit fleet map
Set Quick Key – This assigns a quick key to the System and the scanner will scan the System
when the key is enabled. The default setting is . (no quick key). If you don’t assign a Quick Key to
a system, it will always be scanned unless you Avoid it.
0-99 or . for no quick key.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set Number Tag – This allows you to number a System so you can access it quickly from Scan
Hold mode.
The default setting is no number tag. See also Using Number Tags.
Enter the number [0-99, Blank (no number tag)] and press E/yes to save.
Set Avoid – This determines whether a System will be scanned or not (even if the system is
enabled). Temporary Avoids cancel when you cycle power.
The default setting is Stop Avoiding.
Stop Avoiding, Temporary Avoid, or Permanent Avoid
See also Scan Avoids.
Set Hold Time – This sets (in seconds) the amount of time the scanner will scan the System
before moving on to the next system. All (Unavoided) channels will be scanned at least once
regardless of this setting. The scanner moves to the next system after the hold time expires, any
current transmission ends, and the channel delay time expires. The default setting is 0 seconds.
Enter the hold time and press E/yes to save.
0-255
ID Search – This sets whether the scanner searches for all IDs in a trunking system (On), or
scans only programmed IDs (Off).
The default setting is Off. See also ID Toggle ID Scan or Search.
On or Off
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Fleet Map (Motorola Type I/lli systems Only) – This allows you to program a fleet map
for Motorola Type I Systems. You must program a system fleet map in order for the scanner to
properly track and display talk group IDs.
Block 0 Scroll to the size code (0-14) and press E/yes.
The next available block is prompted to select the next size code (0-14).
Repeat for each block as needed (0-7).
Note: If you select size code 12, 13, or 14, these restrictions apply:
12 can only be assigned to Blocks 0, 2, 4 or 6.
13 can only be assigned to Blocks 0 and 4.
14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you will be prompted for the next
available block. Example: If you assign Block 0 as 12, the scanner prompts you for block
2, the next block available, instead of block 1.
Priority ID Scan (no P25 One Freq) – This allows you to use Priority Scan with IDs in the
System. The default setting is Off.
On or Off
Set Status Bit (Motorola Only) – This sets how your scanner works with Status Bits (also called
S-bits), letting you control how the scanner interprets and displays Motorola talk group IDs. The
default setting is Ignore.
Yes. The scanner treats all received IDs as unique IDs.
Ignore. The scanner rounds all received IDs down to the next interval of 16.
Set End Code (Motorola Only) – This sets how the scanner handles the transmission end code
sent by most Motorola Systems.
The default setting is Analog.
Analog. The scanner recognizes only analog end transmission codes.
Analog+Digital. The scanner recognizes both analog and digital end codes.
Ignore. The scanner waits for the carrier to drop before leaving a channel.
Emergency Alert (Motorola/EDACS Only) – This sets how your scanner alerts you to IDs that
have the emergency flag set. The default setting is Off.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Review ID Avoids – This allows you to review Avoided IDs in the System. Temporary Avoids
appear reversed in the display:
.
Stop Avoiding?. Scroll to ID and press E/yes to Stop Avoiding.
Nothing Avoided appears if nothing is Avoided.
Clear All ID Avoids – This allows you to Stop Avoiding all Avoided IDs in the System.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
At Confirm?, press E/yes or ./no.
Nothing Avoided appears if nothing is Avoided.
Set Audio AGC – This allows you to turn AGC (Automatic Gain Control) on or off for the System.
The default settings are Off.
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 NAC Option (P25 One Freq) – This allows you to have the scanner search for NAC codes or
you can program a specific code for the System.
The default setting is Search.
Search. The scanner opens squelch for any digital signal and displays the NAC being used.
Set P25 NAC. The scanner opens squelch only for signals that include the programmed
NAC.
At Input P25 NAC, see Data Naming.
P25 Waiting Time (Conventional Only) – This setting gives the scanner time to determine
if channels on Conventional Systems have digital or analog transmissions. During this time,
the scanner will evaluate the received signal and, if it detects digital data, will open squelch
immediately. If digital is not detected before the delay expires, the scanner will open squelch at the
end of this delay. This is to prevent “false decode” problems. This setting only affects conventional
channels with an Audio Type set to All. The default setting is 400 ms.
0 to 1000
Note: Any analog transmissions will lose the first part of the transmission, up to the wait
time you set here.
P25 Threshold Mode – (Conventional Only)
The default setting is Auto.
Auto. Automatically sets the decode threshold based on the received signal.
Manual. Allows you to manually set the threshold in threshold setting mode by using the P25
Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto.
P25 Threshold Level (Conventional Only) – The default setting is 8.
0 to 20
proGrammInG sItes
neW sIte/sIte optIons
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Site and press E/yes.
To Create a New Site, scroll to New Site and press E/yes.
To Edit an Existing Site, scroll to the Site and press E/yes.
Note: Not all options will appear for all sites.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
edit name
set modulation
set attenuator
p25 threshold mode
p25 threshold level
delete site
set site type
edit band plan
set frequencies
set avoid
set location Information
p25 Waiting time
new site
Edit Name
See Data Naming.
Set Site Type (EDACS Only) – EDACS Wide is the same as EDACS Standard and use a 9600
baud control channel. EDACS Narrow-band sites use a 4800 baud control channel.
Wide (Standard) or Narrow. The default setting is Wide.
Edit Band Plan (Motorola/P25 Only) – Band plans are required so the scanner can correctly
determine the voice channel frequencies.
P25 Systems. Explicit mode systems (which comprise most systems in use) include all
information needed to determine voice frequencies on the control channel, leave all entries
blank. The system will automatically detect the band plan and fill in the entries. Implicit
systems need you to supply the systems band plan with the Custom option for the scanner
to correctly determine voice frequencies.
Select Plan - Scroll to each Band Plan 0-9, A-F, and press E/yes.
Input Base Freq - Enter the base frequency press E/yes.
Input Spacing - Enter the step size and press E/yes.
Press Menu to return and repeat for each band plan as needed.
Motorola Systems
800/900 Standard or 800 Splinter
The scanner will use the regular Motorola band plan.
Custom (rebanded) Motorola/VHF/UHF Systems. Custom band plans require that you
enter both a lower and an upper base frequency value. The lower base frequency (or base)
is always the base frequency as provided in the Radio Reference Database.
Use this Excel spreadsheet to calculate the upper base frequency value located at:
http://info.uniden.com/twiki/pub/UnidenMan4/CalculatingUpperBaseFrequencies/
CustomBandPlanCalculator.xls
If you don’t have Excel you can download and install a viewer here, or do a simple Google
search.
The upper base frequency can also be found using the Band Plan Calculator located at:
http://info.uniden.com/twiki/bin/view/UnidenMan4/CalculatingUpperBaseFrequencies.
Also, look at Determining Base/Step/Offset for VHF/UHF Motorola Systems at Radio
Reference.com.
For Standard 800 MHz Rebanded Systems, you need to set Band Plan 1 and Band Plan 2
as follows:
Band Plan
Lower Base Freq Upper Base Freq
Offset
440
0
Polarity
Spacing
25 khz
1
2
851 025
854 000
+
+
851 0125
868 9875
25 khz
Select Plan 1-6 Select for each Band Plan.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Base Freq
Input Lower. Enter the lower base frequency and press E/yes.
Input Upper. Enter the upper base frequency and press E/yes.
Set Offset
Input Offset. Enter the offset and press E/yes.
Select Polarity. Scroll to + (default) or - and press E/yes.
Set Spacing. Scroll to the step size and press E/yes.
Press Menu to return and repeat for each band plan as needed.
Set Frequencies – This is where you program trunking frequencies for the Site.
New Frequency/Edit Frequency. Enter the frequency and press E/yes.
For EDACS and LTR sites only:
Input LCN. Enter the LCN number and press E/yes.
Delete Frequency
At Confirm Delete?, press E/yes or ./no.
Set Modulation (no P25/P25 One Freq) – This setting selects the modulation used for the Site.
The default setting is Auto.
Auto, NFM, or FM
See also Scan Modulation.
Set Attenuator – This setting controls whether the scanner attenuates signals on the Site by
about 20 dB The default setting is Off.
On or Off
See also Scan Attenuation.
Set Avoid – This determines whether a Site will be scanned or not. Temporary Avoids cancel
when you cycle power. The default setting is Stop Avoiding.
Stop Avoiding, Temporary Avoid, or Permenant Avoid
See also Scan Avoids.
Set Location Information – This allows you program a location for the Site to use with Location
Control enabled or with a GPS. You can program a circle with a radial range or multiple rectangles
as a location.
See Set Up GPS first to set your location format and the Baud rate.
Circle
Set Latitude
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Set Longitude
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Set Range See also Understanding Range.
0-6000
Rectangles
New Rectangle
Latitude - Top Left
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Longitude - Top Left
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Latitude - Bottom Right
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Longitude - Bottom Right
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Stored Rectangle
Edit Rectangle See Rectangles above.
Delete Rectangle
At Confirm Delete? press E/yes or ./no.
P25 Waiting Time (Motorola Only) – This setting gives the scanner time to determine if channels
on mixed Motorola Systems have digital or analog transmissions. During this time, the scanner will
evaluate the received signal and, if it detects digital data, will open squelch immediately. If digital
is not detected before the delay expires, the scanner will open squelch at the end of this delay.
This is to prevent “false decode” problems. This setting only affects channels with an Audio Type
set to All. The default setting is 400 ms.
0 to 1000
Note: Any analog transmissions will lose the first part of the transmission, up to the wait
time you set here.
P25 Threshold Mode (P25/Motorola)
The default setting is Auto.
Auto. Automatically sets the decode threshold based on the received signal.
Manual. Allows you to manually set the threshold in threshold setting mode by using the P25
Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto.
P25 Threshold Level (P25/Motorola) – The default setting is 8.
0 to 20
Delete Site – Deletes the Site.
At Confirm Delete? press E/yes or ./no.
New Site – See New Site.
proGrammInG departments
neW department/department optIons
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Department and press E/yes.
To Create a New Department, scroll to New Department and press E/yes.
To Edit an Existing Department, scroll to the Department and press E/yes.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
department optIons
edit name
edit Channel
set location Information
delete department
set avoid
new department
Edit Name
See Data Naming.
Edit Channel
See Channel Options.
Set Location Information – This allows you program a location for the Department to use with
Location Control enabled or with a GPS. You can program a circle with a radial range or multiple
rectangles as a location.
See Set Up GPS first.
Circle
Set Latitude
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Set Longitude
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Set Range See also Understanding Range.
0-6000
Rectangles
New Rectangle
Latitude - Top Left
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Longitude - Top Left
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Latitude - Bottom Right
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Longitude - Bottom Right
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Stored Rectangle
Edit Rectangle See Rectangles above.
Delete Rectangle
At Confirm Delete? press E/yes or ./no.
Set Avoid – This determines whether a Department will be scanned or not. Temporary Avoids
cancel when you cycle power.
The default setting is Stop Avoiding.
Stop Avoiding, Temporary Avoid, or Permanent Avoid
See also Scan Avoids.
Delete Department – Deletes the Department.
At Confirm Delete? press E/yes or ./no.
New Department – See New Department.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
proGrammInG frequenCIes/tGIds
quICKlY storInG a frequenCY/tGId
In scan mode press Channel to hold on any channel.
Enter the Frequency or TGID and press E/yes. See also Edit Frequency/TGID.
Note: You have to enter a TGID/frequency in the proper format for the system you are
holding on. Example: You can’t enter a Motorola Type II TGID when holding on an LTR
system.
Store a Frequency/TGID into a “Quick Save” Favorites List
At Quick Freq/TGID Save?, press E/yes.
The scanner will save the Frequency/ TGID in a Favorites List called Quick Save
Favorites List, in a System called Quick Save System, (with no quick keys assigned), in a
Department called Quick Save Department.
Store a Frequency/TGID into a Current Favorites List
At Quick Freq/TGID Save?, press ./no.
At inquiry Press E/yes.
At Select Favorites List, scroll to the Favorites List where you want to store the
Frequecy/TGID and press E/yes.
At Select System, scroll to the System where you want to store the Frequency/TGID and
press E/yes.
At Select Department, scroll to the Department where you want to store the Frequency/
TGID and press E/yes.
After storing the Frequency/TGID, you will be at the Channel Options menu to complete the
settings for the new channel. If you don’t want to edit the channel settings press Avoid to
return.
neW Channel/Channel optIons
Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Department and press E/yes.
Scroll to the Department and press E/yes.
Scroll to Edit Channel and press E/yes.
To Create a New Channel, scroll to New Channel and press E/yes.
At Input Frequency/TGID, enter the frequency or TGID and press E/yes.
To Edit an Existing Channel, scroll to the Channel and press E/yes.
Channel optIons
Note: Not all options will appear for all channels.
edit name
set attenuator
set alert
edit frequency or tGId set service type
set avoid
46
Download from Www.Somanuals.com. All Manuals Search And Download.
set audio type
set number tag
set modulation
Edit Name
set delay time
volume offset
delete Channel
new Channel
set priority
See Data Naming.
Edit Frequency or TGID
Enter the frequency or TGID and press E/yes to save. See also Entering IDs for Partial IDs.
To enter a Conventional Frequency, enter the Frequency and press E/yes.
To enter a Motorola Type II TGID, enter the TGID and press E/yes.
To enter a Motorola Type I TGID, enter the Block Number and Fleet Number, press ./no
twice for a hyphen, then enter the Subfleet and press E/yes.
To enter an EDACS ID in AFS format, enter the Agency Number, press ./no twice for a
hyphen, then the Fleet and Subfleet and press E/yes.
To enter an EDACS TGID in Decimal format, enter the TGID and press E/yes.
To enter a LTR TGID, enter the Area Code (0 or 1) and press ./no twice for a hyphen,
then enter the Home Repeater Number (01-20) and press ./no once, then the User ID
(1-254) and press E/yes.
To enter an I-Call ID, press ./no once then enter the ID and press E/yes.
To enter a Wildcard I-Call ID, press ./no once then enter 0 and press E/yes.
To enter Hexadecimal IDs, see Data Naming.
Note: If the channel is already stored in the group TGID or Frequency Exists Accept? (Y/N)
appears. Press ./no to return. You can also Avoid wildcard IDs.
Set Audio Type (Conventional/Motorola Only) – Select All if this channel might contain both
digital and analog signals. If you are sure the channel is analog set the channel to Analog Only.
This will prevent the P25 Waiting Time for the conventional system from losing the first part of the
transmission up to the wait time you set there.
All. The scanner determines whether the audio is analog or digital.
Digital Only. The scanner will receive the channel only if it is carrying APCO 25 digital
audio.
P25 NAC Option (Conventional Only)
Search - the scanner searches and displays any NAC tone received.
Set P25 NAC - allows you to program a NAC code. See Data Naming.
Note: You can also store a (blinking) NAC code when receiving the frequency
in scan mode by pressing E/yes.
Analog Only. The scanner will only receive analog audio.
Set CTCSS/DCS
Search. The scanner searches and displays any CTCSS or DCS tone.
Note: You can also store a (blinking) CTCSS/DCS tone when receiving a
frequency in scan mode by pressing E/yes.
CTCSS. Scroll to the desired CTCSS tone. Press E/yes to save.
DCS. Scroll to the desired DCS tone. Press E/yes to save.
Set Lockout. Scroll to CTCSS or DCS and press E/yes.
Scroll to the desired tone you want avoided and press E/yes to save.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Number Tag – This allows you to number a Channel so you can access it quickly from scan
hold mode.
The default setting is no number tag. See also Using Number Tags.
0-999, Blank (No number tag)
Set Modulation (Conventional Only) – This setting selects the modulation used for the channel.
The default setting is Auto.
Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)
See also Scan Modulation.
Set Attenuator (Conventional Only) – This setting controls whether the scanner attenuates
signals on the Channel by about 20 dB.
The default setting is Off.
On or Off
See also Scan Attenuation.
Set Service Type – This sets the Service Type for The Channel.
The Appendix has a list of Service Types and their general descriptions.
Default is Custom 1.
Scroll to the Service Type and press E/yes.
Set Delay Time – This sets (in seconds) the amount of time the scanner stays on a channel
after the transmission has ended before moving to the next channel. A negative delay will force a
resume after that number of seconds.
The default setting is 2 seconds.
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Priority – This sets the channel as a priority channel while scanning. The default setting is
Off.
Note: To use Priority ID Scan you must also enable Priority ID Scan for each System. See
also Priority Scanning.
On or Off
Set Alert – This setting controls when and how the scanner alerts you if the channel becomes
active. The default setting is Off.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Set Avoid – This determines whether a channel will be scanned or not. Temporary Avoids cancel
you cycle power. The default setting is Stop Avoiding.
Stop Avoiding, Temporary Avoid, or Permanent Avoid
See also Scan Avoids.
Volume Offset – This sets the Volume Offset for the Channel.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
-3, -2, -1, 0, 1, 2, or 3
Note: You can also toggle volume offset for a channel in scan hold mode by pressing Func
then 0(LVL).
Delete Channel – Deletes the Channel.
At Confirm Delete? press E/yes or ./no.
New Channel – See New Channel.
set sCan seleCtIon
Manage Quick Key Status – This is one way to enable or disable your System quick keys and
Favorites Lists quick keys. The other way is using the number keys on the keypad. See Selecting
Quick Keys.
Favorites Quick Key
Scroll to each Favorites List quick key and press E/yes to enable or disable.
System Quick Key
Scroll to each Favorites List and press E/yes.
Favorites List
Scroll to each System quick key and press E/yes to enable or disable.
Set Nationwide Systems (Database Only) – This setting enables or disables Nationwide
systems in the Database, only when the Database is being scanned.
Scroll to each Nationwide System and press E/yes to enable or disable.
Select Lists to Monitor – This setting enables or disables your Favorites Lists and the database
for scanning. You must first enable each list here, before you can enable the quick key for the list
or you will see Nothing to Scan.
Note: You will need to set a location to enable the database.
Scroll to the Full Database, Search with Scan, or each Favorites List, then press E/yes to
enable or disable.
For Search with Scan, see also Search with Scan and Edit Custom Search.
Set All Lists Off/On – These settings turn all Favorites Lists on or off.
Select Set All Lists Off/On then press E/yes to toggle each setting.
manaGInG full database
Press Menu then scroll to Manage Full Database and press E/yes.
Scroll to the options below and press E/yes.
Review Avoids – You can review all Systems, Departments, and Channels that are avoided and
stop avoiding each one.
Note: The Database must be enabled for scan to review Avoids.
Scroll to each System, Department, or Channel and press E/yes to stop avoiding. Temporary
Avoids appear reversed in the display -
.
Stop All Avoiding – This will stop avoiding all Systems, Departments, and Channels in the
Database.
At Confirm Delete?, press E/yes or ./no.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Information – This will show the database version in the scanner.
usInG startup KeYs
to use a startup KeY:
1.
Turn the scanner off.
2.
Press and hold the number key that corresponds to the startup key when you turn the
scanner on.
3.
Continue holding the number key until the scanner display shows the number of the startup
key configuration
When you use Startup Configuration, the scanner checks all Favorites Lists and:
1.
Favorites whose Startup Key matches the one the user pressed are changed to Monitor
Status ON.
2.
Favorites whose Startup Key DOES NOT match the one the user pressed are changed to
Monitor Status OFF.
Caution: If you press the wrong key when you press the power key to set your startup
configuration, and that wrong key doesn’t have any Favorites Lists assigned to that
key, you will start up your scanner with all systems Avoided-Nothing to Scan.
prIorItY sCannInG
Priority Scan – When the scanner is scanning a Conventional System, it interrupts scanning,
based on the Priority Interval and Max Channels settings, to check priority channels for activity.
The more channels you have set to priority, the longer the interruption will be. The Favorites
List(s) and System(s) containing the priority channel(s) have to be enabled (and not Avoided) or
the scanner will display Priority Scan No Channel.
Priority ID Scan – This function is similar to conventional priority although there is no interruption
during the transmission. Priority is checked in between transmissions, when the scanner is
receiving the control channel, and during the channel delay period. The scanner can only look for
priority IDs in the trunked system it is currently scanning.
Priority DND – The scanner checks priority channels, based on the Priority Interval and Max
Channels settings, only when not receiving other conventional channels so there is no interruption
in scanning with conventional systems.
The highest priority is for channels in System Quick Key 0. The lowest priority is for channels in
System Quick Key 99. Priority for priority channels in the same channel Department follows the
order in which the channels were created.
To use Priority Scan, you must first set your Priority Channels.
To use Priority ID Scan, you must also enable Priority ID Scan for each system.
To Toggle Priority Modes, press Func then ./no(Pri).
prIorItY sCan optIons
Press Menu then scroll to Priority Scan and press E/yes.
set priority
set Interval
maxChannels/pri-scan
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Priority – Sets the Priority mode. You can also toggle these modes by holding on any channel
in scan mode and pressing Func then ./no(Pri).
Off - The Priority feature is off.
Priority DND - The scanner checks Priority channels only when not receiving other
conventional channels.
PRI appears in the display reversed -
Priority Scan - The scanner checks conventional priority channels.
PRI appears in the display -
.
.
Set Interval – This sets (in seconds) how often the scanner will check the priority channels.
1-10 sec.
MaxChannels/Pri-Scan – This sets the maximum number of priority channels that are scanned
during one priority scan interrupt. If there are more priority channels than the value you select,
the channels are divided into more than one group and the scanner scans each group in turn.
Example: If you set the maximum channels to 20 and there are 100 priority channels, the scanner
checks those 100 channels in groups of 20 and takes a total of 5 intervals to complete the priority
scan.
1-100
sCannInG bY assIGnInG quICK KeYs
With previous scanners, you selected banks to scan. With this scanner, you select Favorites List
and Systems to scan by assigning Quick Keys to them.
See also Understanding Quick Keys.
Scanning is performed with a mixture of FLQK order and SQK order. The scanner will not scan all
Systems in one Favorites List and then move to the next List.
For each Favorites List, starting with 0, the scanner will scan each 0 SQK in FLQK order and then
move to the next set of SQKs for each list.
Example:
FLQK 0, SQK 0; FLQK 1, SQK 0…. FLQK 98, SQK 99; FLQK 99, SQK, 99.
Systems with the same quick key are scanned in order of creation.
The Database is scanned next, in order of creation. Then, Systems with no quick key (including
created Quick Save Systems) are scanned and in order of creation.
Conventional Channels and Departments within Systems are also scanned in order of creation.
IDs are not really scanned. The scanner checks for any activity in the trunking system and:
•
•
Will display all IDs when ID Search mode is set to On.
Will display only programmed IDs when ID Search mode is set to Off.
Next, any Custom Searches (enabled for Search with Scan) are scanned in order.
Then, the scanner scans the Close Call ‘Hits with Scan’ system (if Unavoided). This is a system
that automatically stores the frequencies found by Close Call. If the ‘Hits with Scan’ system has no
frequencies, the scanner will not scan the system.
The scanner scans a system for the duration you set using the System Hold Time option. For
trunked systems, the scanner moves to the next system after the hold time expires, the current
transmission ends, and the channel delay expires. Conventional systems operate similarly, but all
(Unavoided) channels are scanned at least one time regardless of the hold time setting.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Checklist:
1.
2.
You must enable at least one Favorites List or the Full Database in Select Lists to Monitor.
Favorites Lists or Systems, with Quick Keys assigned to them, must be enabled with quick
keys or through Manage Quick Key Status.
3.
Service Types required for channels must be set to On.
Any Favorites List not assigned to a quick key, not Avoided, and set to On in Select – to Monitor
will be scanned.
Any System not assigned to a quick key and not Avoided, will be scanned.
Time
and
Date
Quick Key for
System
Quick Key for
Favorites List
Scanning
Direction
System
Name
Department Name
Favorites List Name
scan Mode
Signal Strength
Channel
Name
Function Tag
Frequency
CTCSS/DCS/NAC
scan receive
system hold
site hold
unit id display - Channel hold
search with scan - Frequency hold
Change Direction or Resume Scan Turn the Scroll Control.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
seleCtInG quICK KeYs
Select a Favorites List Quick Key – Press the number key(s) assigned to the Favorites
List then press E/yes. Example: 00, E/yes to enable or disable List 0.
Select a System Quick Key in the Current List – Press ./no, then the number key (2 digits)
assigned to the System.
Example: ./no, 03, E/yes to enable or disable System 3.
Select a System Quick Key in a Different List – Press the number key(s) assigned to the
Favorites List then ./no, then the number key (2 digits) assigned to the System then E/yes.
Example: 00, ./no, 04, E/yes to enable or disable List 0, System 4.
toGGle dIsplaY modes
Hold on any channel and press Func then 9(DISP). Press Channel to resume.
In BCD536HP, you can turn 3-Line Display on and off.
In BCD436HP, you can turn on Disp. Unit ID on and off.
3-Line Display Oꢀ
53
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Line Display On
toGGle Id sCan or Id searCh
While scanning each Trunked System, press Func then E/yes.
seleCt servICe tYpes
(BCD536HP) Press Serv.
(BCD436HP) Press Func then Zip/Services.
Scroll to each Service Type and press E/yes to enable or disable.
holdInG
Channel Hold
Press Channel to hold on a Channel. Scroll to channels.
Press Channel to release Hold mode.
Department Hold
Press Dept to pause then hold on any Department.
Double press Dept to hold without a pause.
Press Dept then quickly scroll to the Department in pause mode.
Double press Dept to release Department hold.
Site Hold
Press Func then Dept to hold on any Site.
Press Func then Dept to release Site hold.
Press Dept then rotate the scroll control to select a Site.
System Hold
Press System to pause then hold on any System.
Double press System to hold without a pause.
Press System then quickly scroll to the System in pause mode.
Double press System to release System hold.
replaY the last transmIssIons
While scanning, press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
start/stop reCordInG
While scanning, press Func then Replay.
Note: Resets to Off when you turn off the scanner.
advanCed Channel menu
While the channel is in the display, press e/yes
Edit Current Channel - See Channel Options.
Add to Favorites List - Press E/yes or ./no.
At Select Favorites List, scroll to the Favorites List and press E/yes.
Save Sub Audio/P25 NAC - CTCSS Tone or DCS/NAC Code (blinking)
At Are you sure?, press E/yes.
Save Talk Group ID - Unknown Talk Group ID with ID Search
At Are you sure?, press E/yes or .No.
At Select Department, scroll to the Department and press E/yes.
Save Unit ID - Unknown Unit ID
At Are you sure?, press E/yes or .No.
store a searCh frequenCY (searCh WIth sCan)
Press E/yes.
Then see Storing Frequencies.
Adding Systems From the Database
Press E/yes to store a frequency.
attenuatIon
Channel Attenuation - Press Channel to hold on the channel and press Func then 4(ATT)
to toggle attenuation.
Global Attenuation - Press Channel to hold on any channel then press Func then press
and hold 4(ATT) to toggle global attenuation.
modulatIon
Conventional Channel Modulation
Press Channel to hold on the channel.
Press Func then Channel(MOD) to toggle modulation.
Press Channel to release hold mode.
Site Modulation
Press Func then Dept to hold on the Site.
Press Channel to hold on any channel.
Press Func then Channel(MOD) to toggle modulation.
Press Channel to release hold mode.
Press Func then Dept to release Site hold mode.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
IntermedIate frequenCY exChanGe
Press Channel to hold on the channel.
Press Func then 7(IFX) to toggle on or off.
repeater frequenCY ConventIonal Channel
Press Channel to hold on the channel.
Press Func then press and hold 8(REV).
Channel volume offset
Press Channel to hold on the channel.
Press Func then press 0(LVL) to toggle.
avoIdInG Channels, departments, sItes, and sYstems
Avoids are common to every System in the Favorites List.
Temporary Avoids cancel when you cycle power. See also Review Avoids.
Channel Avoid When the Channel is in the display or in Channel Hold mode:
To Temporary Avoid, press Avoid once.
To Permanent Avoid, press twice when the channel is in the display or in Channel Hold
mode.
Department Avoid
Press Dept then Avoid once to Temporary Avoid.
Press Avoid twice to Permanent Avoid.
Site Avoid When the Site is in the display or in Site Hold mode (Func then Dept):
To Temporary Avoid, press Dept then quickly press Avoid.
To Permanent Avoid, press Dept then quickly press Avoid twice.
To Stop Avoiding, press Dept then Avoid once.
Press Func then Dept to release Site hold.
System Avoid
Press System then Avoid once to Temporary Avoid.
Press Avoid twice to Permanent Avoid.
ChanGe Your loCatIon
(BCD536HP) Press the Zip button.
(BCD436HP) Press Zip/Services.
Select your Country, and enter a zip/postal code. See also Set Your Location.
set the ranGe
(BCD536HP) Press the Rang button.
Enter new range using the numeric keys and press E/yes to save.
(BCD436HP) See Set Range.
See also Understanding Range and Understanding Location Control.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
dIreCt frequenCY/tGId entrY
Press Channel to hold on any Channel.
Enter the Frequency/TGID and press E/yes. Press Channel to release hold.
usInG number taGs
If two Favorites Lists have the same number tag, they will be selected in sequence. The first time
you select the number tag, the scanner will go to the first Favorites List assigned to that number
tag; if you select the same number tag again, it will go to the 2nd Favorites List assigned to that
number tag, and so on. The same rule applies to System and Channel number tags.
View Number Tags
BCD436HP - Number Tag is always displayed in Scan Hold mode.
BCD536HP - Press Func in Scan Hold mode..
System Number
Tag
Favorite Number
Tag
Channel Number
Tag
Go To Number Tag
Press Channel to hold on any channel.
Enter the Favorites number tag, ./no, then the System number tag, ./no, then the
Channel number tag and press Channel.
Examples:
1.01.36 to go to Channel 36 in System 01 in Favorites List 1.
Favorite
Number Tag
System
Number Tag
Channel
Number Tag
.01.36 to go to Channel 36 in System 01 in current Favorites List.
..36 to go to Channel 36 in current System.
Close Call modes
To toggle CC Off, CC DND, or CC Pri:
(BCD536HP) Press SQ ( ).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
(BCD436HP) Hold on any channel and press Func then Avoid(
).
Close Call Hit
See Using Close Call.
prIorItY modes
Press Func then ./no(PRI) to toggle Priority mode Off, DND, or On.
Weather Alert Priority
Press Channel to hold on any channel.
Press Func then 6(WX) to toggle on or off.
Custom searCh bY searCh KeY
Press Channel to hold on any channel.
Press Func then 1(SRCH1), 2(SRCH2), or 3(SRCH3), to start a Custom Search assigned to
a Search Key.
Close Call onlY
(BCD536HP) Press and hold SQ (
).
(BCD436HP) Press Func then press and hold Avoid (
).
Weather sCan
Press Channel to hold on any channel.
Press Func then press and hold 6(WX).
tone-out standbY/searCh
(BCD536HP Only)
Press Func then SQ. (Push F+FTO)
(BCD436HP) Assign Tone-Out Standby/Search to a Search Key.
revIeW avoIds
Database Avoids. Press Menu and scroll to Manage Full Database.
Scroll to the following:
Review Avoids - Scroll to each channel, department, site, or system and press E/yes to
Stop Avoiding. Temporary Avoids appear reversed in the display -
Stop All Avoiding - At Confirm?, press E/yes or ./no.
Favorites List Avoids. Press Menu and scroll to Manage Favorites.
Scroll to the Favorites List and press E/yes.
.
Scroll to the following:
Review Avoids - Scroll to each channel, department, site, or system and press E/yes
to Stop Avoiding. Temporary Avoids appear reversed in the display -
Stop All Avoiding - At Confirm? press E/yes or ./no.
ID Avoids. Press Menu and scroll to Manage Favorites.
Scroll to the Favorites List and press E/yes.
.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll to Review/Edit System and press E/yes.
Scroll to the System and press E/yes.
Scroll to Edit Sys Options and press E/yes.
Scroll to the following:
Review ID Avoids - Scroll to each ID and press E/yes to Stop Avoiding.
Clear All ID Avoids - At Confirm? press E/yes or ./no.
Clear All Avoids for Site or Department – Press Channel to hold on any System.
Press and hold Avoid.
quICK searCh
Press Func then E/yes to start Quick Search at the current frequency.
p25 adjustment mode
(BCD536HP) Press Func then Vol. Press Func then Vol to exit.
(BCD436HP) Press Vol then Func then Vol. Press Vol to exit.
APCO Decode
Error Rate
Threshold
Level
P25 Condition
Mode
Threshold
Voltage
Set the P25 Threshold mode to Manual in Site Options or System Options for a
Conventional channel.
Press Func then Dept to hold on a Site or Channel to hold on a digital Channel.
The first line on the display now shows the digital error rate and the decode threshold setting
(0-20). The second line on the display shows the decode threshold levels for the site.
Allow the scanner to monitor the site or channel for several minutes. The error rate should
drop for each transmission and the threshold levels should automatically adjust to a more
optimal setting. Then, once the threshold level settles to a stable setting, make a note of the
value. This is the site’s or channel’s optimum decode threshold.
Press Func and rotate the Scroll Control to set the MAN decode threshold start level to a
setting that most closely matches the system’s optimum decode threshold. Whatever you set
at this point will be remembered for this site as the starting point for the auto-tuning function
for subsequent transmission on site. See also P25 Threshold Level.
usInG a Gps
loCatIon-based sCannInG
You can connect the scanner to a compatible GPS device and set the scanner to automatically
Avoid and Unavoid Departments and Sites based on your current location. This frees you from
having to manually enable and disable Departments and Sites as you change locations.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
For the BCD436HP, use the 4-pin mini plug to connect to the scanner using a NMEA compatible
GPS device. The BCD536HP has a 9-pin RS232 male serial connector and you should select a
baud rate of (4800 bps) for the serial port.
A good application of this feature would be to set the longitude and latitude for each multi-site
system transmitter as usually you can receive at least a handful in any given location. Set the
range to around 30 miles and the scanner will automatically Avoid or Unavoid Sites when in and
out of range. It may also be relevant to set different locations/ranges for the Departments within
the site.
You can find the physical location of antennas using the databases available at Radio Reference
or the FCCs Antenna Structure Registration site.
Both sites list the latitude, longitude, and height of the antenna and both sites can map the exact
location for you.
Once the scanner completes the initial GPS review, if you move into or out of an area covered
by a Site/Department, the scanner will Avoid and Unavoid Sites and Departments according to
Range settings for the scanner and Sites/Departments.
If you cycle power, all Sites/Departments are Unavoided until the scanner reacquires the GPS
signal and completes the initial GPS review.
Note: If you unplug your GPS device or it loses reception to satellites, the scanner will use
the last known location as the current location.
See also Set Location to set your Location, Range, and relevant GPS options.
See also Understanding Location Control and Understanding Range.
All Sites/Departments with locations set and not within range of your current location will be
temporarily Avoided.
dIsCoverY mode
Trunking Discovery mode allows you to monitor a trunked radio system, logging system channel
activity and recording the audio for channels.
Conventional Discovery mode lets you monitor a range of frequencies, logging frequencies with
activity and recording the audio for frequencies that are not already known to be in use in your
area so that you can more easily identify the users. This includes frequencies used conventionally
as well as in trunked radio systems.
In both modes, you also have the option to compare hits to the Database and log all hits or just
new hits.
If you use the Auto Store option, Discovery will create a new Trunking System for IDs found for
each Session or will create a new Conventional System for frequencies found for each Session.
You can create and save several sessions with different settings. Every time you start a session
you create a Run that can later be reviewed in the scanner or the Sentinel software.
neW sessIon
Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking Discovery or Conventional Discovery and press E/yes.
Scroll to New Session and press E/yes.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Conventional Discovery
Input Session Name - Enter the Name and press E/yes. See Data Naming.
Trunking Discovery
Input System Name - Enter the first few relevant letters of the system and press E/yes.
See Data Naming.
Note: The System must be enabled for scan to input system name.
Select System - Scroll to the System and press E/yes.
Select Site - Scroll to the Site and press E/yes.
Input Session Name - Enter the Name and press E/yes. See Data Naming.
sessIon optIons
Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking/Conventional Discovery and press E/yes.
Scroll to the Discovery Session and press E/yes.
start discovery
edit session name
set limit frequencies
set modulation
set step
set Compare to database
set record duration
set time-out timer
system Information
set auto store
set delay
delete session
set logging
Change system
Start Discovery
This starts the Discovery Session.
Press Menu to stop and review the Run information. See Review Discovery.
Press Avoid to Avoid a hit.
Press Func then System to exit.
Edit Session Name
This allows you to name a Session.
See Data Naming.
Set Limit Frequencies (Conventional Only)
This sets the lower and upper frequencies for conventional discovery session.
Set Lower Limit Enter the lower limit.
Set Upper Limit Enter the upper limit.
Set Modulation (Conventional Only)
This sets the modulation for conventional discovery session.
Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)
Set Step (Conventional Only)
This sets the step size for conventional discovery session.
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Delay
This sets the Delay when monitoring a site or frequencies.
0, 1, 2, 3, 4, or 5 sec.
Set Logging
This will log all hits or just new hits.
All or New Only
Set Compare to Database
Select On to compare hits against the channels already in the Database. Only new channels will
have audio recorded (if enabled). Select Off to treat all hits as new channels.
On or Off
Set Record Duration
This sets how much audio will be recorded for each new channel.
None, 30, 60, 90, 120, 150, 180, 300, or 600 sec.
Set Time-Out Timer
This is used to keep a stuck channel from stealing the whole Run in a session.
Off, 10, 30, or 60 sec.
System Information (Trunking Only)
This will give you where it came from, (Full Database or Favorites List), the System Type,
(Motorola, P25, etc.), and the System used for the Discovery Session.
Set Auto Store
This turns Auto Store on and will create a System called Conventional or Trunking Discovery.
On or Off
Delete Session
This deletes the session.
At Confirm Delete? Press E/yes or ./no.
Change System (Trunking Only)
This allows you to create or change the System used and change the Site used for the session.
Input System Name
Press E/yes to Skip if System is saved.
See Data Naming.
Select System
Select the System to use for the session.
Select Site
Select the Site to use for the session.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Conventional Discovery
revIeW dIsCoverY
In Review Discovery mode, you can review the results of discovery mode runs, resume runs, or
restart saved discovery sessions.
Press Menu then scroll to Discovery and press E/yes.
Scroll to Review Discovery and press E/yes.
Scroll to Trunking/Conventional Discovery Results and press E/yes.
Scroll to select each Run.
Review Run Results
Summary List by each frequency.
Detail - List by each hit.
Restart this Run. Delete all log files.
Restart? Press E/yes or ./no.
Resume this Run Continue without deleting log files.
Resume? Press E/yes or ./no.
Delete this Run
At Confirm Delete?, press E/yes or ./no.
Rename this Run
See Data Naming.
Run Information
Shows the Session settings.
searCh/Close Call optIons
These are the settings you should look at before you perform a Quick Search, or Close Call
Search.
Press Menu. Scroll to Srch/CloCall Opt and press E/yes.
Scroll to the options below and press E/yes.
freq avoids
set delay time
set attenuator
set audio aGC
p25 Waiting time
broadcast screen
repeater find
p25 threshold mode
p25 threshold level
Freq Avoids – This allows you to review Avoided Frequencies or Stop Avoiding all Frequencies
for Searching and Close Call search.
Temporary Avoids appear reversed in the display -
.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Stop All Avoiding. See also Search Avoids.
At Confirm? Press E/yes or ./no.
Rvw Search Avoid
Scroll to Frequency and press E/yes to Stop Avoiding.
Broadcast Screen – Automatically ignores transmissions that are on common broadcasts, paging
systems, and other annoyance radio sources during Custom Search, Quick Search, or Close Call
Search. The default setting is Pager On.
Set All Band On/Off. Turns Broadcast Screen On or Off for All Bands.
Set Each Band
Scroll to each Band and press E/yes to enable or disable.
Program Band
Band 0-9 Select for each Close Call Band and other searches.
Set Lower Limit - Input the lower frequency limit.
Set Upper Limit - Input the upper frequency limit.
Press Menu to return and repeat for each band as needed.
Repeater Find – Sets whether the scanner tries to tune to a repeater output frequency when it
detects a transmission on a repeater input frequency, in Search and Close Call modes. Turning
this feature on can let you hear both sides of the conversation on the output frequency. The
default setting is Off.
On or Off
Set Delay Time – Determines how long the scanner waits after a transmission ends before
resuming Quick Search and Close Call Search operations.
A negative delay will force a resume after that number of seconds.
The default setting is 2 seconds.
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Attenuator – This controls the attenuator for Quick Search, and Close Call operations by
about 20dB. The default setting is Off.
On or Off
See also Search Attenuation.
Set Audio AGC – This allows you to turn AGC (Automatic Gain Control) on or off for Quick Search
and Close Call modes. The default settings are Off.
Analog. Press E/yes to toggle On or Off.
Digital. Press E/yes to toggle On or Off.
P25 Waiting Time – This setting gives the scanner time to determine if frequencies have digital
or analog transmissions. During this time, the scanner will evaluate the received signal and, if
it detects digital data, will open squelch immediately. If digital is not detected before the delay
expires, the scanner will open squelch at the end of this delay. This is to prevent “false decode”
problems. The default setting is 400 ms.
0 to 1000 ms
Note: Any analog transmissions will lose the first part of the transmission, up to the wait
time you set here.
P25 Threshold Mode – The default setting is Auto.
Auto. Automatically sets the decode threshold based on the received signal.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual. Allows you to manually set the threshold in threshold setting mode or using the
P25 Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto.
P25 Threshold Level – The default setting is 8.
0 to 20
searCh optIons
Press Menu. Scroll to Search for... and press E/yes.
Scroll to the options below and press E/yes.
Custom search
set search Key
edit Custom
search with scan
IMPORTANT! There are many options and setting in Search/Close Call Options that affect
and compliment the settings for searching. Please review those first.
edIt Custom
You can edit the 10 Custom Search ranges. The default custom search range names appear as
Custom 1, Custom 2, and so on.
Custom 0-9. Select for each Custom Search.
Edit Name. See Data Naming.
Edit Srch Limit
Set Lower Limit. Enter the lower limit.
Set Upper Limit. Enter the upper limit.
Set Delay Time
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Modulation
Auto, AM, NFM, FM, WFM, or FMB (Broadcast)
Set Attenuator
On or Off
Set Step
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz
Set Audio AGC
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 Waiting Time
0 to 1000 ms
P25 Threshold Mode
Auto, Manual, Default
P25 Threshold Level
0 to 20
Search with Scan. See also Select Lists to Monitor and Search with Scan.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Avoid
Stop Avoiding, Temporary Avoid, or Permanent Avoid
Set Hold Time. Sets how long to search when scanning.
Enter the hold time (0-255 sec.) and press E/yes to save.
set searCh KeY
The scanner has three search keys that you can assign to a search range. The search keys
are number keys 1, 2, and 3. This allows you to start a Custom, Tone-Out, or Close Call Search
without having to go into the menus.
Search Key 1-3. Select a search for each Search Key.
. (nothing assigned), Custom Search 0-9, Tone-Out, or Close Call.
searCh WIth sCan
This enables Custom Searches in Scan mode.
See also Select Lists to Monitor and Edit Custom Search.
Set System Avoid
Stop Avoiding, Temporary, or Permenant Avoid.
quICK searCh
Allows you to start searching at the displayed frequency, or enter a frequency and start searching
from that frequency in hold modes.
Quick Search will search all the way up to 1300 MHz or all the way down to 25 MHz then start
over.
To Start a Quick Search from the Displayed Frequency:
Press Channel to hold on the channel or frequency.
Press Func then E/yes. At Quick Search? Press E/yes.
Press Channel again to release hold mode and start searching.
To Start a Quick Search from a New Frequency:
Press Channel to hold on any channel or frequency.
Enter the new frequency then press Channel to set the new starting frequency. Press
Channel again to release hold mode and start searching.
Press Channel to hold on any channel or frequency. Enter the new frequency you wish
to start at then press Channel to set the new starting frequency. Press Channel again to
release hold mode and start searching.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom searCh
Search range
name
Range number
currently being
searched
Searching
Direction
Allows you to search the scanners 10 programmed frequency ranges.
See also Edit Custom Search.
Press Menu. Scroll to Search for... and press E/yes.
Scroll to Custom Search and press E/yes.
See also Set Search Key.
Change Direction or Resume Search
Turn the Scroll Control.
Select Custom Search Bands
Press the number keys to enable or disable each Custom Search band.
Holding
Frequency Hold. Press Channel to hold on a Frequency.
Scroll to frequencies. Press Channel to release hold.
Avoiding Frequencies
Temporary Avoids cancel when you cycle power.
Frequency Avoid - Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the the scanner
stays in a frequency or in Search Hold mode.
Review Avoids - Press Channel to hold on any Frequency.
Press Func then Avoid. Scroll to each frequency and press E/yes to Stop Avoiding.
Temporary Avoids appear reversed -
.
T
Stop All Avoiding - Press Channel to hold on any Frequency.
Press and hold Avoid. The scanner displays Search Frequencies All Unavoided.
See also Freq Avoids.
Attenuation
Band Attenuation. Press Func then 4(ATT) for each band.
Global Attenuation. Press Channel to hold on any frequency then press and hold Func
then 4(ATT) to toggle global attenuation.
Modulation
Press Func then Channel(MOD) for each band.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Frequency Entry
Press Channel to hold on any frequency. Enter the frequency and press Channel. Press
Channel to release hold.
Frequency Intermediate Exchange
Press Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.
Repeater Frequency
Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions
While searching, press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
While searching, press Func then Replay.
Note: Resets to Off when you turn off the scanner.
Storing Frequencies
Displayed Frequency into a Quick Save Department – Press E/yes.
You will see Quick Frequency Save in the display then press E/yes.
The scanner stores the frequency into the Quick Save Department in the Quick Save
System.
Displayed Frequency into an Existing Department – Press E/yes.
You will see Saving to Quick Dept in the display then press ./no.
At Saving Channel to scroll to the Favorites List and press E/yes.
At Select System scroll to the System and press E/yes.
At Select Department scroll to the and press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete the
settings for the new channel.
If you don’t want to edit the channel settings or are done editing the channel, press
Avoid to return to searching.
Search Menu
Press Func then Menu.
Close Call Modes
To toggle CC Off, CC Pri, or CC DND:
(BCD536HP) Press SQ(
).
(BCD436HP) Press Func then Avoid(
).
Weather Alert Priority Mode
Press Channel to hold on any channel.
Press Func then 6(WX) to toggle on or off.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Close Call
Your scanner’s Close Call feature lets you set the scanner so it detects, alerts you to, and displays
the frequency of a nearby strong radio transmission. You can set the scanner so the Close Call
feature checks for a Close Call hit every 2 seconds in the background while you are scanning,
searching, listening to the weather frequency, etc. or use Close Call Only mode. Close Call
‘Do-Not-Disturb’ will only check for close call signals when you are not receiving transmissions.
You can also select the frequency band(s) to look for transmissions. When the scanner detects a
Close Call hit, it alerts you according to the alert settings.
‘Hits with Scan’ is a special system that automatically stores the last 10 Close Call hits until you
cycle power.
The Close Call feature works well for locating the source of strong local transmissions such
as mobile and handheld two-way radios in areas with no other strong transmission sources.
Performance is increased with higher transmit power, a receive antenna tuned to the target band,
and a low background RF level.
The Close Call feature works better with some types of transmissions than others.
It might not correctly display frequency information for transmitters using a highly directional
antenna (such as an amateur radio beam antenna) or if there are many transmitters operating at
the same time in the same area.
Close Call optIons
Important! There are many options and settings in Search/Close Call Options that affect and
compliment the settings for Close Call. Please review those first.
Note: Close Call does not operate in Weather Scan or Tone-Out Standby/Search.
Press Menu. Scroll to Close Call and press E/yes.
Scroll to the options below and press E/yes.
Close Call only
hits with scan
set CC mode
set CC bands
set CC alert
Close Call Only
This setting puts the scanner in Close Call Only mode.
See also Using Close Call.
You can also toggle these modes by:
BCD435HP: Holding on any channel and pressing Func then Avoid ( ).
BCD536HP: Pressing SQ ( ).
Hits with Scan
This is a special system that automatically stores the last 10 close call hits and allows you to scan
them. Accessible only in the Close Call menu, the system has to be Unavoided to view while
scanning (default is Permanent Avoid). The scanner will delete the frequencies in this system
when you turn the power off.
Set Avoid
Stop Avoiding, Temporary, or Permanent Avoid
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Hold Time. Sets how long to search when scanning.
Enter the hold time (0-255 sec.) and press E/yes to save.
Set CC Mode
Selects the Close Call mode when scanning or searching.
Off. Close Call is turned off.
CC DND. Close Call checks for frequencies every two seconds when the scanner is not
receiving a transmission.
CC Priority. Close Call checks for frequencies every two seconds.
You can also toggle these modes by:
(BCD536HP) Pressing SQ (
).
(BCD436HP) Holding on any channel and pressing Func then Avoid (
).
Set CC Bands
Lets you select the Close Call bands to be searched.
Scroll to each Band and press E/yes to toggle On or Off.
Press Menu to return.
vhf low 1 - 25-54 Mhz
vhf high2 - 225-320 Mhz
vhf low 2 - 54-108 Mhz
air band - 108-137 Mhz
vhf high1 - 137-225 Mhz
uhf - 320-512 Mhz
800mhz+ - 758-960, 1240-1300 Mhz
(Cellular frequencies not scanned)
Set CC Alert
This allows you to set an Alert Tone, Alert Light, and sets the Pause time for Close Call when you
receive a hit.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
Set CC Pause
3, 5, 10, 15, 30, 45, 60, sec. or Infinite.
Close Call Only Mode
(BCD536HP) Press and hold SQ (
).
(BCD436HP) Press Channel to hold on any channel/frequency.
Press Func then press and hold Avoid (
) . See also Set Search Key.
You will see activity on the 7 bands in the display. Bands with an * (asterisk) under them are
turned off.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
When the scanner detects a Close Call signal, CC Found! and Press Any Key display for the
length of time set in Close Call Pause.
Close Call Only Mode
Toggle Close Call Bands
Press the number keys to enable or disable each Close Call band.
Cancel a Hit
Turn the Scroll Control.
Holding on a Hit
Press System, Department, or Channel to hold on the Close Call Hit.
Press Channel to cancel hold. Turn the Scroll Control to start Quick Search.
View Last Hit
Press System, Department, or Channel to recall the last hit.
Press Channel to cancel hold.
Avoiding Hits
Temporary Avoids cancel when you cycle power.
Press Avoid once to Temporary Avoid.
Press quickly to toggle Permanent Avoid and Stop Avoiding when the frequency is in the
display or in Search Hold mode.
Review Avoids. Press Channel to hold on any Frequency.
Press Func then Avoid. Scroll to each frequency and press E/yes to Stop Avoiding.
Temporary Avoids appear reversed in the display -
.
T
Clear All Avoids - Press Channel to hold on any Frequency.
Press and hold Avoid. The scanner displays Search Frequencies All Unavoided.
Close Call Hit
Attenuation
Press Func then 4(ATT) for all bands.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Modulation
Press Func then Channel(MOD) for all bands.
Intermediate Frequency Exchange
Press Channel to hold on any frequency.
Press Func then 7(IFX) to toggle on or off.
Repeater Frequency
Press Channel to hold on any frequency.
Press Func then press and hold 8(REV).
Replay the Last Transmissions
Press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Start/Stop Recording
Press Func then Replay.
Note: Resets to Off when you turn off the scanner.
Storing
Displayed Frequency into a Quick Save Department. Press E/yes.
You will see Saving to Quick Save Department in the display then press E/yes.
The scanner stores the frequency into the Quick Save Department.
Displayed Frequency into an Existing Department Press E/yes.
You will see Saving to Quick Save Department in the display, then press ./no.
At Select Department, scroll to the department where you want to store the frequency and
press E/yes.
After storing the frequency, you will be at the Edit Channel menu to complete the settings
for the new channel.
If you don’t want to edit the channel settings or are done editing the channel, press Avoid
to return to searching.
Close Call Menu
Press Func then Menu.
Weather operatIon
Weather optIons
Press Menu. Scroll to WX Operation and press E/yes.
Scroll to the options below and press E/yes.
set delay time
set attenuator
set audio aGC
Wx alt priority
Weather scan
Weather alert
72
Download from Www.Somanuals.com. All Manuals Search And Download.
program same
review Wx alerts
Set Delay Time
Sets the number of seconds the scanner should wait after a transmission stops before moving on
to the next channel during weather scan.
A negative delay will force a resume after that number of seconds.
The default setting is 2 seconds.
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Attenuator
Sets the attenuator (20 dB) for weather operation.
The default setting is Off.
On or Off
Note: You can also toggle attenuation for weather scan by pressing Func then 4(ATT).
Set Audio AGC
This allows you to turn AGC (Automatic Gain Control) on or off for Weather operations.
The default setting is Off.
Analog - Press E/yes to toggle On or Off.
Program SAME
SAME (Specific Area Messaging System) is a system developed by the National Weather Service
to reduce the number of alerts received by consumers by allowing them to hear alerts only for the
county(ies) they are interested in. Each alert contains information about the type and severity of
the alert, as well as the specific geographic locations affected by the alert.
To receive SAME alerts, you can program up to 5 groups of 8 FIPS codes (40 codes) into the
scanners memory.
To find the FIPS codes for your scanner call the NWS toll free at 1-888-697-7263 (follow the
instructions you hear) or see FIP codes for the United States and its Possessions.
SAME 0-4 Select for each SAME group.
Edit Name. See Data Naming.
Edit County
Code 1-8. Select for each FIP code.
Enter the FIPS code and press E/yes to save.
Weather Alert Priority
Turning the weather alert priority feature on allows the scanner to check the weather channels
every 5 seconds for a 1050 Hz weather alert signal and still scan or search. If you should receive
an alert, you will hear a loud warbling then the weather channel audio.
On or Off
Note: You can also toggle weather alert priority in scan or search modes by holding on any
channel and pressing Func then 6(wx).
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Weather Scan
Press Channel to hold on any channel/frequency. Press Func then press and hold 6(WX).
The scanner starts scanning the preprogrammed weather frequencies and stops on the first good
signal. If the signal is lost, the scanner resumes searching for another weather transmission.
Change Channel
Turn the Scroll Control.
Attenuation
Press Func then 4(ATT).
Intermediate Frequency Exchange
Press Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.
Replay the Last Transmissions
Recording starts when the scanner receives an Alert in Weather Alert.
Press Replay.
Press Channel to pause/resume replay.
Turn the Scroll Control to select recordings.
Quick Search
Press Func then E/yes to start Quick Search at the current frequency.
Weather Menu
Press Func then Menu.
Weather alert
This setting turns on weather alert and determines which types of signals will trigger an alert. See
also Program SAME.
Press Channel to hold on any channel/frequency.
Press Func and then press and hold 6(WX). Press Func then Menu.
Scroll to Weather Alert and press E/yes.
Alert Only - The scanner will scan all the weather channels and immediately sound a
weather alert siren when it detects the 1050 Hz weather alert tone. Press any key to stop the
siren which opens the squelch and the scanner remains on the weather channel.
SAME 0-4 - The scanner sounds a weather alert siren for any programmed county(ies). The
scanner displays warning level as “Warning WX”, “Watch WX” or “Advisory WX” and it
displays decoded Event Code.
When an alert is received, press any key to listen to the alert.
All FIPS - The scanner sounds a weather alert siren for any county.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
The scanner displays warning level as “Warning WX,” “Watch WX” or “Advisory WX” and it
displays decoded Event Code.
When an alert is received, press any key to listen to the alert.
The scanner will mute and scan only the weather channels.
WARNING! If you receive an alert it will be at FULL volume.
Weather Alert
Weather Warning
Review WX Alerts
Replay and review WX/SAME alert event results. The scanner drops these alert events after
the alert time expires.
fIre tone-out
Fire Tone-Out will monitor up to 32 different channels for paging tones (two-tone sequential, single
tone, and group tone).
Tone-Out Standby Mode is used if you use programmed tones.
Tone-Out Search Mode is used if you don’t know the tones.
All tone-outs (channels) that have the same frequency (and modulation and attenuation) as the
one you select will also (and only) be monitored so you can monitor up to 32 tone-out channels for
one frequency.
In this case, the scanner displays each tone-out channel for two seconds. It does not scan them;
tone-out monitors the frequency for all tone-out channels with the same frequency.
Regardless of the current display, the scanner will alert on any received tone out that matches a
stored setting (channel) for the frequency.
Note: Tone-Out Search Mode will not display each Tone-Out channel for two seconds, even
when multiple channels have the same frequency, modulation and attenuator settings with
other channels.
tone-out setup
Press Menu. Scroll to Tone-Out for... and press E/yes.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll to Tone-Out Setup and press E/yes.
Scroll to Tone-Out (0-31) and press E/yes.
Note: Close Call DND/Pri and Weather Alert Priority do not operate in this mode.
edit name
set frequency
set tone
start delay time
set alert
set audio aGC
Edit Name
See Data Naming.
Set Frequency
Edit Frequency Enter the frequency and press E/yes.
Set Modulation
Auto, NFM, FM
Set Attenuator
On or Off
Set Tone
Edit Tone A and press E/yes. Enter the tone and press E/yes to save.
Edit Tone B and press E/yes. Enter the tone and press E/yes to save.
Press Menu to return.
For two-tone pages, enter the tones (in Hz) for tone A and tone B.
For one-tone pages using short tones between 1.25 and 3.75 seconds, enter tone for
tone A, and 0 for tone B.
For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 for tone
A, and the tone for B.
To search for tones, leave the tones for A and B at 0.
Set Delay Time
0 - the scanner resumes standby as soon as the carrier drops after a page.
1, 2, 3, 4, 5, 10, 30 - (seconds): the scanner resumes standby mode after the carrier drops
and the selected time expires.
Infinite - you must press Hold after a page to resume standby mode.
Set Alert
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Audio AGC
This allows you to turn AGC (Automatic Gain Control) on or off for Tone-Out operations. The
default setting is Off.
Analog - Press E/yes to toggle On or Off.
fIre tone-out standbY/searCh
Press Menu. Scroll to Tone-Out for... and press E/yes.
Scroll to Tone-Out Standby and press E/yes.
(BCD536HP Only) press FUNC then SQ.
See also Set Search Key.
Scroll to monitor a Tone-Out channel (0-31).
Press Func then System to exit.
Tone-Out
Standby Status
Tone-Out
channel name
Tone A and B
frequency
Tone-Out
channel
Tone-Out Standby Mode
Any transmission received on the frequency will not be heard but you will still see the signal
strength bars.
To monitor a different frequency, scroll to a tone-out (channel) with a different frequency.
If you press Channel while in Standby/Search mode, the scanner temporarily exits and you will be
able to hear any transmissions on that frequency. No alerts sound, even if a tone-out matches one
you have programmed in hold mode. Press Channel again to return to Standby/Search mode.
If the scanner finds tones in Tone-Out Search mode, you will see Set Found Tone A and B? after
you press E/yes to save.
Tone-Out Search Mode
Select a Different Tone-Out
Turn the Scroll Control.
Listen to Tone-Out Frequency
Press Channel.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Attenuation
Press Func then 4(ATT).
Modulation
Press Func then Channel(MOD).
Intermediate Frequency Exchange
Press Func then 7(IFX) to toggle on or off.
Start/Stop Recording
Press Func then Replay.
Note: Resets to Off when you turn off the scanner.
Store Found Tones
Press E/yes at Save Found Tones?.
Tone-Out Menu
Press Func then Menu.
appendIx
troubleshootInG
Scan Mode, Nothing to Scan
1.
2.
3.
4.
5.
6.
7.
8.
Make sure you Set Your Location to scan the Database.
Make sure Favorites Lists are enabled in Set Scan Selection.
Make sure Service Types are enabled for the Channels you want to hear.
Make sure you have locations programed if Use Location Control is On.
Make sure longitude and latitude are N and W (for N America).
Make sure Systems/Departments/Channels are not Avoided.
Make sure Favorites List/System quick key is enabled.
(Search with Scan) Make sure Search with Scan is enabled in Select Lists to Monitor and
the Search for Menu and for the Custom Search.
Scanning Interrupted
1.
2.
3.
4.
5.
Turn off Priority Scan. Change Priority Interval.
Turn off Close Call Priority.
Turn off Weather Priority.
Set Channel Delay longer.
Set positive Channel Delay.
All Channels Out of Range
1.
Increase your range.
2.
Turn Location Control off for the Favorites List..
78
Download from Www.Somanuals.com. All Manuals Search And Download.
default band CoveraGe
Frequency Range
Step
(kHz)
Mode
Band
Lower
25.0000
Upper
26.9600
27.4050
27.9950
29.6800
49.9900
53.9800
71.9500
75.9950
87.9950
107.9000
136.9916
143.9875
147.9950
150.7875
161.9950
173.9875
215.9500
224.9800
379.9750
399.9875
405.9875
419.9875
449.9875
469.9875
512.0000
Petroleum Products & Broadcast Pickup
CB Class D Channel
Business & Forest Products
10 Meter Amateur Band
VHF Low Band
aM
5
5
5
26.9650
aM
27.4100
aM
28.0000
nFM
nFM
nFM
WFM
FM
20
29.7000
10
50.0000
6 Meter Amateur Band
VHF TV Broadcast 2 – 4
Intersystem & Astronomy
VHF TV Broadcast 5 – 6
FM Broadcast
60
54.0000
50
72.0000
5
76.0000
WFM
FMB
aM
50
88.0000
100
8 33
12 5
5
108.0000
137.0000
144.0000
148.0000
150.8000
162.0000
174.0000
216.0000
225.0000
380.0000
400.0000
406.0000
420.0000
450.0000
470.0000
758.0000
788.0000
806.0000
849.0125
894.0125
Commercial Aircraft
Military Land Mobile
2 Meter Amateur Band
Military Land Mobile
VHF High Band
nFM
nFM
nFM
nFM
nFM
WFM
nFM
aM
12 5
5
Federal Government
TV Broadcast 7 – 13
1.25 Meter Amateur Band
UHF Aircraft Band
12 5
50
20
25
Trunked Military Band
Miscellaneous
nFM
nFM
NFM
NFM
NFM
NFM
12 5
12 5
12.5
12.5
12.5
12.5
6 25
6 25
12 5
12 5
12 5
25
Trunked Federal Government
70 cm Amateur Band
UHF Standard Band
UHF TV Band
787.99375 NFM
805.99375 NFM
Public Service Band
Public Service Band
Public Service Band
Public Service Band
Public Service Band
25 cm amateur Band
823.9875
868.9875
960.0000
NFM
NFM
NFM
1240.0000 1300.0000 NFM
When you select AUTO for a channel, modulation, or step, the above values are used unless
you’ve edited the Band Defaults
Steps can be selected from 5/6.25/7.5/8.33/10/12.5/15/20/25/50/100/AUTO (kHz).
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Although TV bands are listed, the scanner cannot decode digital TV audio.
servICe tYpes
Service Type
Description
For civilian aircraft and air traffic control operations most typically in the 118-
136 MHz and 225-380 MHz bands in AM mode.
aircraft
Most business related entities not covered by other tags.
Jail/prison operations, corrections activities, federal prisons.
Business
Corrections
emergency ops
Emergency Operation Centers and similar emergency management or
disaster related operations.
Ambulance dispatch, including rescue squads.
eMs dispatch
Ambulance on-scene communications, tactical operations and secondary
channels.
eMs-Tac
Ambulance talk-around, car-to-car and supervisor operations.
eMs-Talk
All federal government operations (except corrections, traditional law
enforcement patrol and fire/EMS operations).
Federal
Fire dispatch, including combined fire/ambulance dispatch.
Fire dispatch
Fireground, tactical and on-scene communications, including combined fire/
ambulance operations.
Fire-Tac
Fire talk-around and car-to-car operations, chiefs, supervisors, etc., including
combined fire/ambulance operations.
Fire-Talk
Any amateur radio assignment
ham
Ambulance-to-Hospital communications and patient reports.
hospital
interop
Interoperability communications, cross-agency communications, mutual aid,
etc.
Law enforcement dispatch.
law dispatch
Law enforcement tactical, SWAT, on-scene, surveillance and specific sub-
agency communications.
law-Tac
law Talk
Law enforcement talk-around, car-to-car and supervisor operations.
Newspapers, television and broadcast radio operations.
Military operations, e.g., range control, air-to-air combat, etc.
Combined law enforcement and fire/ambulance dispatch.
Media
Military
Multi-dispatch
Multi-Tac
Combined law enforcement and fire/ambulance tactical and on-scene
communications.
Combined law enforcement and fire/ambulance tactical talk-around and car-
to-car operations.
Multi-Talk
Public agency non-public safety communications. This includes any non-
public safety government services, such as trash, streets, roads, sewer, zoos,
administration, maintenance, animal control, community initiatives, code
compliance, etc.
Public Works
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Type
racing officials
racing Teams
railroad
Description
Available for use to identify officials’ frequencies for racing events.
Available for use to identify team frequencies for racing events.
All common carrier railroad communications.
School-related communications (schools, school buses, football games, etc.).
schools
Non-law enforcement security operations, including private security
security
companies, noncommissioned government agency security, school security,
etc.
Public and private bus, taxi, and public passenger rail communications.
Private electric, water, natural gas, phone, cable TV, etc. operations.
Miscellaneous channels that do not fall into another service type.
Transportation
utilities
other
User-defined service types. These can be used for custom groups of
channels, systems, sites, etc.
Custom 1-8
removInG the microsd Card
Carefully remove the microSD card by using a thumbnail or pencil eraser to push the card in so
it will spring out. Handle with care if you are going to use it in a card reader. Gently install the
microSD card the same way it was removed and to push the card in so it will spring back into
place.
Reformatting the microSD Card
Reformat microSD cards using a special SD Card Formatter (https://www.sdcard.org/downloads/
formatter_4/). Then, you need to “Clear User Data” using Sentinel to restore all HP files and
directories to the card.
After formatting, the HP won’t be automatically detected (since it is wiped clean), so you may need
to uncheck “Hide empty drives” in windows “Tools>Folder Options>View before doing the “Clear
User Data” step.
enterInG Ids
These are the acceptable ID entry formats.
Partial IDs can be used to receive all IDs in a Fleet, Sub-Fleet, Agency, etc.
Partial IDs can also be Avoided.
System Type
TGID Format
BFF-ss = normal id
Motorola Type 1
systems
B = Block
F = Fleet
BFFF-s = normal id (Fleet is 100 - 127)
BFF- = Partial Fleet id
BFFF- = Partial Fleet id (Fleet is 100 - 127)
B- = Partial Block ids
s = sub-Fleet
n = decimal number
i = i-Call id
nnnnn (size code 0)
innnnn (size code 0)
81
Download from Www.Somanuals.com. All Manuals Search And Download.
System Type
TGID Format
Motorola Type 2
systems
n = decimal number
h = hexadecimal number
i = i-Call id
Decimal Format
nnnnn
innnnn
Hexadecimal Format
hhhh
ihhhh
P25 systems
n = decimal number
h = hexadecimal number
i = i-Call id
Decimal Format
nnnnn
innnnnnnn
Hexadecimal Format
hhhh
ihhhhhh
edaCs systems
a = agency
F = Fleet
s = sub-Fleet
n = decimal number
i = i-Call id
only aFs Format is allowed for
direct entry except for i-Call id
AFS Format
aa-FFs (normal id)
aa-FF- (Partial Fleet id)
aa- (Partial agency id)
Decimal Format
nnnn
innnnn
lTr systems
a = area number
rr = home repeater number
u = decimal number
a-rr-uuu (normal id)
a-rr (Partial repeater id
Note: A-RR (Partial Repeater ID) cannot be used with decimal formats.
tYpe II speCIal status bIts
Type II Motorola Smartnet systems use these status bits for special transmissions such as
emergency, patches, DES/DVP scrambled transmissions, and multiselects. Motorola trunking
radios directly interpret them for their special functions, thus no difference is noticed by the person
with the radio. The scanner however interprets these special talk group status bits as different talk
groups entirely. Below is the conversion chart for these special status bits.
TT ID + # Usage
id+0 normal Talk group
TT ID + # Usage
id+8 des/dVP encryption talk group
id+9 des all Talk group
id+1 all Talk group
id+2 emergency
id+10 des emergency
id+3 Talk group patch to another
id+4 emergency Patch
id+5 emergency multi-group
id+6 unassigned
id+11 des Talk group patch
id+12 des emergency Patch
id+13 des emergency multi-group
id+14 unassigned
id+7 Multi-select (initiated by dispatcher) id+15 Multi-select des TG
Therefore, if a user was transmitting a multi-select call on talk group 1808, the scanner would
actually receive those transmissions on 1815.
Some common uses of these status bits are as follows:
When a user hits their emergency button, all conversations on the talk group revert to
the emergency status talk group (ID+2) until the dispatch clears the emergency status.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Therefore, if someone hit their emergency button and their radio was on talk group 16, all
communications would switch to talk group 18.
A lot of Fire and EMS departments dispatch tone-outs and alarms as Multi-select
communications (ID+7). Therefore, if your fire department dispatch talk group is 1616, and
they do dispatch tone-outs and alarms as Multi-selects, then those communications will be
on talk group 1623.
Weather Channels
Channel
Frequency
162.550
162.400
162.475
162.425
Channel
Frequency
162.450
162.500
162.525
1
2
3
4
5
6
7
ST
adr
aVa
Event Code
administrative Message
avalanche Watch
Warning Watch Advisory
Definition?
admin Message
avalanche
o
o
aVW
BhW
BWW
BZW
Cae
avalanche Warning
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
avalanche
Biological hazard Warning
Boil Water Warning
Biological
Boil Water
Blizzard Warning
Blizzard
Child abduction emergency
Civil danger Warning
Civil emergency Message
Coastal Flood Watch
Coastal Flood Warning
Chemical hazard Warning
Contaminated Water Warning
dam Watch
Child emergency
Civil danger
Civil eMG
CdW
CeM
CFa
Coastal Flood
Coastal Flood
Chemical
CFW
ChW
CWW
dBa
dBW
deW
dMo
dsW
ean
Contam Water
dam Break
dam Break Warning
Contagious disease Warning
Practice/demo
dam Break
Contagious
system demo
dust storm
eMG notify
dust storm Warning
emergency action
notification
eaT
emergency action
Termination
o
eMG Terminate
eQW
eVa
eVi
earthquake Warning
evacuation Watch
o
o
o
earthquake
evacuate note
evacuate note
immediate evacuation
83
Download from Www.Somanuals.com. All Manuals Search And Download.
ST
FCW
FFa
Event Code
Food Contamination Warning
Flash Flood Watch
Warning Watch Advisory
Definition?
Food
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Flash Flood
Flash Flood
Flash Flood
Flood
FFs
Flash Flood statement
Flash Flood Warning
Flood Watch
FFW
Fla
Fls
Flood statement
Flood
FlW
FrW
FsW
FZW
hls
Flood Warning
Flood
Fire Warning
Fire
Flash Freeze Warning
Freeze Warning
Flash Freeze
Freeze
hurricane statement
hazardous Material Warning
hurricane Watch
hurricane
hazardous
hurricane
hurricane
high Wind
high Wind
iceberg
hMW
hua
huW
hWa
hWW
iBW
hurricane Warning
high Wind Watch
high Wind Warning
iceberg Warning
iFW
industrial Fire Warning
local area emergency
law enforcement Warning
land slide Warning
national audible Test
national information Center
industrial Fire
local eMG
law enforcement
land slide
national audible
national info
network Message
lae
leW
lsW
naT
niC
nMn
network notification
Message
nPT
nsT
national Periodic Test
o
nation Period
nation silent
nuclear Plant
Power outage
radiological
Monthly
national silent Test
o
nuW
Pos
rhW
rMT
rWT
sMW
sPs
nuclear Power Plant Warning
Power outage advisory
radiological hazard Warning
required Monthly Test
required Weekly Test
o
o
o
o
o
o
o
o
o
Weekly
special Marine Warning
special Weather statement
shelter in-Place Warning
severe Thunderstorm Watch
special Marine
special Wx
sheleter
sPW
sVa
Thunderstorm
84
Download from Www.Somanuals.com. All Manuals Search And Download.
ST
Event Code
Warning Watch Advisory
Definition?
sVr
severe Thunderstorm
Warning
o
Thunderstorm
sVs
Toa
Toe
severe Weather statement
o
severe Wx
Tornado Watch
o
Tornado
911 Telephone outage
emergency
o
911 Phone outage
Tor
Tra
TrW
Tsa
TsW
TxB
TxF
Tornado Warning
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Tornado
Tropical storm Watch
Tropical storm Warning
Tsunami Watch
Tropical storm
Tropical storm
Tsunami
Tsunami Warning
Tsunami
Transmitter Backup on
Transmitter Carrier off
Transmitter Carrier on
Transmitter Primary on
Volcano Warning
Tx Backup on
Tx Carrier off
Tx Carrier on
Tx Primary on
Volcano
Txo
TxP
VoW
WFa
WFW
Wsa
WsW
**a
Wild Fire Watch
Wild Fire
Wild Fire Warning
Wild Fire
Winter storm Watch
Winter storm Warning
unrecognized Watch
unrecognized emergency
unrecognized statement
unrecognized Warning
Winter storm
Winter storm
unrecognized
unrecognized
unrecognized
unrecognized
**e
**s
**W
Continuous Tone Coded Squelch System (CTCSS) and Digital Coded Squelch (DCS) are two
methods used to prevent interference by other radio communications. Your scanner can receive
transmissions that use these codes.
CTCSS and DCS systems all use some form of coded squelch. Coded squelch involves the
transmission of a special code signal along with the audio of a radio transmission. A receiver with
coded squelch only activates when the received signal has the correct code. This lets many users
share a single frequency, and decreases interference caused by distant transmitters on the same
channel. In all major metropolitan areas of the United States, every available radio channel is
assigned to more than one user.
CtCss frequenCIes
The scanner can detect the following 50 CTCSS frequencies.
67 0hz
69 3hz
71 9hz
94 8hz
97 4hz
100 0hz
131 8hz
136 5hz
141 3hz
171 3hz
173 8hz
177 3hz
203 5hz
206 5hz
210 7hz
85
Download from Www.Somanuals.com. All Manuals Search And Download.
74 4hz
77 0hz
79 7hz
82 5hz
85 4hz
88 5hz
103 5hz
107 2hz
110 9hz
114 8hz
118 8hz
123 0hz
146 2hz
151 4hz
156 7hz
159 8hz
162 2hz
165 5hz
179 9hz
183 5hz
186 2hz
189 9hz
192 8hz
196 6hz
218 1hz
225 7hz
229 1hz
233 6hz
241 8hz
250 3hz
91 5hz
127 3hz
167 9hz
199 5hz
254 1hz
dCs Codes
The scanner can detect the following hexadecimal DCS codes.
006
007
015
017
021
023
025
026
031
032
036
043
047
050
051
053
054
065
071
072
073
074
114
115
116
122
125
131
132
134
141
143
145
152
155
156
162
165
172
174
205
212
214
223
225
226
243
244
245
246
251
252
255
261
263
265
266
271
274
306
311
315
325
331
332
343
346
351
356
364
365
371
411
412
413
423
431
432
445
446
452
454
455
462
464
465
466
503
506
516
523
526
532
546
565
606
612 703
624 712
627 723
631 731
632 732
654 734
662 743
664 754
reverse lIst
Base Frequency
(MHz)
Offset
(MHz)
+0 1
-0 1
+1
Base Frequency
(MHz)
Offset
(MHz)
+5
-5
29 5200 - 29 5800
450 0000 - 454 9875
29 6200 - 29 6800
52 0100 - 52 9900
53 0100 - 53 9900
143 7500
455 0000 - 459 9875
460 0000 - 464 9875
465 0000 - 469 9875
470 0000 - 472 9875
473 0000 - 475 9875
476 0000 - 478 9875
479 0000 - 481 9875
482 0000 - 484 9875
485 0000 - 487 9875
488 0000 - 490 9875
491 0000 - 493 9875
494 0000 - 496 9875
497 0000 - 499 9875
500 0000 - 502 9875
+5
-5
-1
+4 375
+4 25
+0 6
-0 6
+0 6
+1
+3
-3
143 9000
144 5100 - 144 8900
145 1100 - 145 4900
146 0100 - 146 3850
146 4150 - 146 5050
146 5950
+3
-3
+3
-3
+1
+3
-3
146 6100 - 146 9850
147 0000 - 147 3900
147 4150 - 147 5050
147 5950
-0 6
+0 6
-1
+3
-3
-1
+3
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Frequency
(MHz)
Offset
(MHz)
-0 6
Base Frequency
(MHz)
Offset
(MHz)
-3
147 6000 - 147 9900
503 0000 - 505 9875
148 1250
-4 375
-4 25
+1 6
-1 6
506 0000 - 508 9875
509 0000 - 511 9875
758 0000 - 775 9937
788 0000 - 805 9937
806 0000 - 823 9875
851 000 - 868 9875
896 0000 - 901 0000
935 0000 - 940 0000
+3
158 1500
-3
222 1200 - 223 3800
223 7200 - 224 9800
420 0000 - 424 9875
425 0000 - 429 9875
440 0000 - 444 9875
445 0000 - 449 9875
+30
-30
+5
+45
-45
-5
+5
+39
-39
-5
repeater frequenCY lIst
Base Frequency
(MHz)
Offset
Base Frequency
Offset
(MHz)
-3
(MHz)
-5
(MHz)
497 0001 - 500 0000
503 0001 - 506 0000
509 0001 - 512 0000
758 0000 - 775 9937
806 0051 - 823 9875
894 0125 - 921 0000
455 0151 - 459 9950
465 0101 - 469 9950
473 0001 - 476 0000
479 0001 - 482 0000
485 0001 - 488 0000
491 0001 - 494 0000
-5
-3
-3
-3
-3
+30
+45
+39
-3
-3
87
Download from Www.Somanuals.com. All Manuals Search And Download.
teChnICal speCIfICatIons - bCd436hp
Band Coverage
Size:
: 31 Bands
2.8 in (W) x 1.5 in (D) x 6.3 in (H) (without antenna)
71.1 mm (W) x 36.9 mm (D) x 160.9 mm (H) (without antenna)
Weight: 12.3 oz. (with antenna and battery)
operating Temperature:
storage Temperature:
Power requirements:
+ 14º F (– 10º C) to + 140º F (+ 60º C )
– 22º F (– 30º C) to + 158º F (+ 70º C )
3 x aa rechargeable ni-Mh Batteries (2300mah) (included)
3 x aa alkaline Batteries (not included)
dV 5 0V 5% Connect to PC with usB cable (included)
lCd display: 192 x 160 Full dot Matrix lCd with white-color backlight
internal speaker: 24ohm, 0 8W Max
Certified in accordance with FCC Rules and Regulations Part 15 Sub-part C as of date of
manufacture.
Weather Channels: 7 Channels
Scan Rate:
85 channels/second
Search Rate:
80 steps/second (12.5kHz step)
250 steps/second (5kHz step)
Scan Delay:
2 seconds
Audio Output Power:
Internal Speaker - 360mW nominal
(24ohm)
Headphone (L-ch) 4mW nominal
(32 ohm)
Antenna:
50 ohms (Impedance)
sensitivity (12dB sinad) nominal
VhF low 1 Band
(aM)
(nFM)
25 005 Mhz
40 840 Mhz
53 980 Mhz
0 4 μV
0 3 μV
0 3 μV
(nFM)
VhF low 2 Band
(WFM)
54 050 Mhz
72 515 Mhz
107 100 Mhz
0 7 μV
0 3 μV
0 6 μV
(FM)
(FMB)
aircraft Band
(aM)
118 800 Mhz
127 175 Mhz
135 500 Mhz
0 4 μV
0 4 μV
0 4 μV
(aM)
(aM)
88
Download from Www.Somanuals.com. All Manuals Search And Download.
VhF high 1 Band
(nFM)
138 150 Mhz
0 4 μV
(nFM)
(nFM)
161 985 Mhz
173 225 Mhz
197 450 Mhz
216 020 Mhz
0 3 μV
0 3 μV
0 6 uV
0 3 uV
(WFM)
(nFM)
VhF high 2 Band
(aM)
225 050 Mhz
272 950 Mhz
315 050 Mhz
0 3 μV
0 4 μV
0 4 μV
(aM)
(aM)
uhF Band
(aM)
325 050 Mhz
406 875 Mhz
511 9125 Mhz
0 4 μV
0 3 μV
0 3 μV
(nFM)
(nFM)
Public service Band
(nFM)
758 0125 Mhz
806 000 Mhz
857 150 Mhz
954 9125 Mhz
0 3 μV
0 3 μV
0 3 μV
0 3 μV
(nFM)
(nFM)
(nFM)
1200Mhz Band
(nFM)
1299 925 Mhz
0 4 μV
Close Call sensitivity (no Modulation)
(nFM)
(FM)
40 8400 Mhz
-58 dBm
-65 dBm
-69 dBm
-71 dBm
-71 dBm
-66 dBm
-64 dBm
-58 dBm
72 5150 Mhz
127 1750 Mhz
161 9850 Mhz
272 9500 Mhz
406 8750 Mhz
857 1500 Mhz
1299 9250 Mhz
(aM)
(nFM)
(aM)
(nFM)
(nFM)
(nFM)
signal noise ratio (nominal)
VhF low 1 Band
(aM)
25 0050 Mhz
49 dB
(nFM)
40 8400 Mhz
43 dB
VhF low 2 Band
(WFM)
54 0500 Mhz
53 dB
89
Download from Www.Somanuals.com. All Manuals Search And Download.
(FM)
(FMB)
72 5150 Mhz
47 dB
107 100 Mhz
60 dB
aircraft Band
(aM)
127 1750 Mhz
50 dB
VhF high 1 Band
(nFM)
161 9850 Mhz
173 2250 Mhz
197 4500 Mhz
41 dB
42 dB
52 dB
(nFM)
(WFM)
VhF high 2 Band
(aM)
272 9500Mhz
50 dB
uhF Band
(aM)
325 0500 Mhz
50 dB
(nFM)
406 8750 Mhz
41 dB
Public service Band
(nFM)
758 0125 Mhz
42 dB
(nFM)
857 1500 Mhz
42 dB
1200 Mhz Band
(nFM)
1299 9250 Mhz
41 dB
Features, specifications, and availability of optional accessories are all subject to change without
notice.
teChnICal speCIfICatIons - bCd536hp
Size: 7.2 in W (184 mm) x 5.9 in D (151) x 2.2 in H (56 mm)
Weight: 54.3 oz. (without accessories)
operating Temperature:
storage Temperature:
Power requirements:
+ 14º F (– 10º C) to + 140º F (+ 60º C )
– 22º F (– 30º C) to + 158º F (+ 70º C )
dC 11 0 V - 16 6 V (ext dC Power jack or dC Power jack)
orange Wire operation:
lCd display:
dC 3 V - 16 6 V (less than 10ma)
64 x 288 Full dot Matrix lCd
internal speaker: 8 ohm, 5W Max
Certified in accordance with FCC Rules and Regulations Part 15 Sub-part C as of date of
manufacture.
Weather Channels:
Scan Rate:
7 Channels
85 channels/second (nominal)
Search Rate:
80 steps/second (nominal)
250 steps/second (5kHz step - nominal)
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan Delay:
2 seconds
Audio Output Power:
Antenna:
5W Max., 8 ohm Load
50 ohms (Impedance)
sensitivity (12dB sinad) nominal
VhF low Band
(aM)
(nFM)
25 005 Mhz
0 4 μV
0 2 μV
0 2 μV
40 840 Mhz
(nFM)
53 980 Mhz
VhF low 2 Band
(WFM)
54 050 Mhz
72 515 Mhz
107 100 Mhz
0 6 μV
0 2 μV
0 6 μV
(FM)
(FMB)
aircraft Band
(aM)
118 800 Mhz
127 175 Mhz
135 500 Mhz
0 3 μV
0 3 μV
0 3 μV
(aM)
(aM)
VhF high 1 Band
(nFM)
138 150 Mhz
0 2 μV
(nFM)
(nFM)
161 985 Mhz
173 225 Mhz
197 450 Mhz
216 020 Mhz
0 2 μV
0 3 uV
0 6 uV
0 3 uV
(WFM)
(nFM)
VhF high 2 Band
(aM)
225 050 Mhz
272 950 Mhz
315 050 Mhz
0 3 μV
0 3 μV
0 4 μV
(aM)
(aM)
uhF Band
(aM)
325 050 Mhz
406 8750 Mhz
511 9125 Mhz
0 4 μV
0 3 μV
0 3 μV
(nFM)
(nFM)
Public service Band
(nFM)
758 0125 Mhz
806 000 Mhz
857 150 Mhz
954 9125 Mhz
0 3 μV
0 3 μV
0 2 μV
0 2 μV
(nFM)
(nFM)
(nFM)
1200Mhz Band
(nFM)
1299 9250Mhz
0 3 μV
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Close Call sensitivity (no Modulation)
(nFM)
(FM)
40 8400 Mhz
-60dBm
-62dBm
-67dBm
-66dBm
-67dBm
-63dBm
-63dBm
-56dBm
72 5150 Mhz
127 1750 Mhz
161 9850 Mhz
272 9500 Mhz
406 8750 Mhz
857 1500 Mhz
1299 9250 Mhz
(aM)
(nFM)
(aM)
(nFM)
(nFM)
(nFM)
signal noise ratio (nominal)
VhF low 1 Band
(aM)
25 0050 Mhz
48dB
(nFM)
40 8400 Mhz
42dB
VhF low 2 Band
(WFM)
54 0500 Mhz
72 5150 Mhz
107 1000 Mhz
52dB
47dB
58dB
(FM)
(FMB)
aircraft Band
(aM)
127 1750 Mhz
49dB
VhF high 1 Band
(nFM)
161 9850 Mhz
173 2250 Mhz
197 4500 Mhz
40dB
41dB
53dB
(nFM)
(WFM)
VhF high 2 Band
(aM)
272 9500 Mhz
49dB
uhF Band
(aM)
325 0500 Mhz
49dB
(nFM)
406 8750 Mhz
40dB
Public service Band
(nFM)
758 0125 Mhz
41dB
(nFM)
857 1500 Mhz
41dB
1200 Mhz Band
(nFM)
1299 9250 Mhz
42dB
Features, specifications, and availability of optional accessories are all subject to change without
notice.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
WarrantY InformatIon
WARRANTOR: UNIDEN AMERICA CORPORATION (Uniden)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this
Uniden Product to be free from defects in materials and craftsmanship with only the limitations or
exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further
effect 12 months after the date of original retail sale.
The warranty is invalid if the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations
not sold by Uniden,
(C) improperly installed,
(D) serviced or repaired by someone other than an authorized Uniden service center for a defect
or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of any system not manufactured by
Uniden, or
(F) installed or programmed by anyone other than as detailed by the Operating Guide for this
product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty
at any time while this warranty is in effect, warrantor will repair the defect and return it to you
without charge for parts, service, or any other cost (except shipping and handling) incurred by
warrantor or its representatives in connection with the performance of this warranty. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING
TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES
OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES
NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental
or consequential damages so the above limitation or exclusion might not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you might also have other
rights which vary from state to state.
This warranty is void outside the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the
instructions in this Operating Guide you are certain that the Product is defective, pack the Product
carefully (preferably in its original packaging). Include evidence of original purchase and a note
describing the defect that has caused you to return it. The Product should be shipped freight
prepaid, by traceable means, or delivered, to warrantor at:
Uniden America Corporation
Parts and Service Division
743 Henrietta Creek Rd.
Roanoke, Texas 76262.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|