Uniden Telephone FP204 User Manual

FP204

LCD Display

Caller ID

Speaker Phone

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION OF CONTROLS

LCD

Hook switch

NEW CALL

indicator

IN USE indicator

button

This unit is not

button

waterproof. Do not

expose this product to

rain, water, moisture

or any other liquid.

phone book

button

Speaker volume

control

delete button

Speaker

M1~M3

button

dial button

store button

mute button

redial button

speakerphone

flash button

The earcap of this

telephone may attract

and retain small

metallic objects.

SETUP

AC Adaptor

Line Cord

New Zealand

Australia

Tel Line Adaptor (Not supplied)

Battery

Compartment

(HI/LO/OFF)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Line Cords and AC Adaptor

1. Plug one end of the supplied telephone cord into the telephone line socket located

at the rear of the phone.

2. Plug the other end into the telephone line wall jack.

3. Plug the AC Adaptor lead into the power socket at the rear of the phone.

4. Plug AC Adaptor into a standard wall outlet and switch it on.

Setting Time and Date

If you subscribe to a Caller ID Service, your time and date will automatically be set for you

when you receive your first call to this unit.

FLASH

1. Press and hold

2. Use and

, display shows SET TIME.

DIAL

to select the correct number, press

to confirm and move

to the next digit, HH:MM DD/MM.

DEL

3. Press

to exit.

OPTIONAL BACKUP BATTERY INSTALLATION

Batteries may be used instead of the supplied AC Adaptor.

1. Remove the battery compartment cover.

2. Fit 4 x AAA alkaline batteries.

If using the AC Adaptor,

Batteries are not

required for normal

operation.

3. Replace the cover.

Based on ½ hour use per day, good alkaline

batteries should last 2-3 months.

Always ensure

telephone cord is

disconnected before

opening the battery

compartment door and

installing batteries.

Battery

Compartment

4x AA Batteries

Download from Www.Somanuals.com. All Manuals Search And Download.

Digit Insert 0 Caller ID

To correctly display and dial Call ID numbers, you may need to insert a digit at the beginning of

your telephone number. (eg: in New Zealand, Telecom requires a '0' to be inserted.)

New Zealand:

If you subscribe to Telecom New Zealand, this code has already been set for you to '0N'. If you

subscribe to another telephone company, please set the insert 0 to "ON".

If this phone is used with a business PABX - consult the PABX manufacturer for the correct setting.

Australia:

Telecom New Zealand

Customers: this code is

already set to "0N".

For private household telephone lines, set insert 0 to OFF.

If this phone is used with a business PABX - consult the PABX manufacturer for the

correct setting.

Australian Customers:

This code is already set

to "OFF".

While the handset is on the base:

DEL

1. Press

2. Use

button twice quickly. INSERT O OFF or INSERT O ON will be displayed.

and to choose on or off.

DIAL

3. Press

to store.

Download from Www.Somanuals.com. All Manuals Search And Download.

TELEPHONE KEY and SWITCH FUNCTIONS

Ring Volume (Hi/Lo/Off)

Set the ring volume switch to the desired level (Hi, Lo or Off). The maximum level is Hi. The

switch is located at the back of the unit.

Ring Pitch (Hi/Lo)

Set the ring pitch switch to the desired level (Hi or Lo). The switch is located at the back of the

unit.

Regular dialling

Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The

dialled number will appear on the display screen whenever you make a call.

Redial function

To redial the previous number you called. Lift the handset or press

REDIAL

and then press

Last 10 number redial

1. With the handset on the cradle press

2. Press or

3. Pick up the handset or press

REDIAL

to review the last 10 numbers dialled.

to dial the selected number.

Pause function

To insert a temporary pause. Press the

REDIAL

/pause button during a dialling sequence. For

example, in some cases when dialling an international number you need to place a pause between

the clusters of numbers to allow the telephone company, relaying the call, time to process it. The

REDIAL

number 011-886-22-795-1234 would need to be dialled 011

REDIAL

/pause 886,

/pause

REDIAL

22,

/pause795,

/pause 1234.

Mute button

For privacy when you are required to consult with a person standing next to you and do not wish

MUTE

the party on the line to hear your conversation, press

again to resume the conversation.

. MUTE will be displayed. Press

Handset Volume (Hi/Lo)

Set the handset volume switch to the desired position (Hi or Lo). The switch is located at the back

of the unit.

For 'Call Waiting' to

operate you must

Flash button - Call Waiting

If the Call Waiting tone sounds while you are on a call -

FLASH

New Zealand: Press the

FLASH

button to switch between callers.

to switch between callers.

subscribe to this service

through your local

telephone company.

If you do not have this

service, then pressing

the flash button during a

call may disconnect the

caller.

Australia: Press

then

Speaker Button

To switch your call to speaker phone, press

and hang up the handset. To switch

back, simply pick up the handset and speak. You can make, receive and dial in the

speaker mode.

Speaker Volume

During the conversation, you can move the slide control on the right hand side of the

unit to adjust the speaker volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY MESSAGES

Message Waiting

MSG

If you have arranged a voice mail service with your

telephone company, the LCD screen will display

MESSAGE WAITING for a few seconds after a call is

received. The screen will then display MSG in the upper

left corner until you retrieve the message from the voice

mail service. MESSAGE WAITING will be saved as a

Caller ID record. The MSG function may not be

available in all areas.

For LCD messages to

operate, you must first

subscribe to the Caller ID

service through your

local telephone company.

Total & New Calls

This displays the total calls received and which of those

are new calls.

No Calls

When all calls have been deleted the screen will display

NO CALL.

Private

If a caller has exercised the option which prevents the

caller's name and number from being sent, the screen

will display PRIVATE.

Repeat Calls

If the same call is received again on the same day,

REPEAT will be displayed in the top right of the LCD

screen.

End of List

This is displayed when you use the review

and have reached the top end of the call history list. If

there are no calls in the list the LCD screen displays NO

CALL.

Out of Area

This will be displayed when the caller's telephone

company does not provide Caller ID services or does not

provide name and number services via the long distance

network.

Battery Low Indicator

If you are using batteries, this icon is displayed when the

batteries require replacing.

Download from Www.Somanuals.com. All Manuals Search And Download.

CALLER ID

A Caller ID record consists of the following information:

Time and Date of call

Number of new calls or record number

Total calls

The LCD display will not

operate if the AC Adaptor

is not connected or if the

batteries are flat or not

installed.

Caller's number

Caller's name (if available)

CALLER ID OPERATION

New Call Indicator

The red indicator light of your phone will flash when you have New Calls. It will

continue to flash until you have reviewed the calls displayed on the LCD screen.

Review Call Records

For Caller ID features to

operate you must first

subscribe to this service

through your local

Use the review

call record list, END OF LIST will be displayed.

buttons to scroll through the caller list. At the end of the

Call Records

Your phone stores up to 99 Call records. When the list is full a new incoming call will

automatically delete the oldest call record.

telephone company.

Call Back feature

You can automatically dial the number of a person who has recently called.

1. Select the caller that you wish to call back by pressing the review

button.

2. Pick up the handset of press

and the number will be dialled.

Del button - for deleting Caller ID records

Individual Delete

1. With the handset in its cradle, press

you wish to delete.

buttons or select the number

DEL

2. Now press the

3. To confirm the number chosen is to be deleted, press

button. The LCD screen will show DEL?

DEL

again. The number

will be deleted.

Delete All

1. With the handset in its cradle, press

buttons or select the number

you wish to delete.

2. Press and hold

DEL

and ALL DEL? will be displayed.

DEL

3. Press

to delete all records.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPEED DIAL NUMBERS

Three speed dial numbers can be programmed into the memory of your telephone

(

). Each memory location can store a maximum of 16 digits.

Storing One-Touch Speed Dial Numbers

STORE

A Speed Dial label has

been provided to

1. Press

. The LCD shows -->

2. Enter phone number using the keypad (up to 16 digits).

STORE

record Speed Dial

names. You may wish

to stick it on the inside

of the handset.

3. Press

. The LCD shows -->?.

4. Press the speed dial location you wish to store the number to

5. The LCD shows SAVE OK.

Dialing One-Touch Numbers

To dial a stored memory number:

1. Pick up the handset or press

2. Press the desired speed dial button,

PHONEBOOK

Storing Name and Number

PHONEBOOK

1. Press and hold

line.

until a new entry appears with the cursor at the second

2. Enter the number using the keypad (up to 20 digits). Press _REDIALto insert a pause

PHONEBOOK

P. Use

to delete previous digit. Press

to confirm number.

DEL

DIAL

3. Enter the name using the keypad. Press

to move the cursor to the right. Use

PHONEBOOK

Delete to delete previous digit. Press

to confirm name. Number and

Name are stored and cursor appears at new entry.

To Review Phonebook

PHONEBOOK

Press

. Use

to review. You can quickly review an entry by

pressing the first letter of the name, the LCD will display the matching name(s).

To Edit a Phonebook Entry

Review an entry as per instructions above. Press and hold

PHONEBOOK

until the first

DEL

character of the name flashes. Edit the name or press

number.

to move cursor to edit the

To Delete a Phonebook Entry

DEL

During review process select the entry you wish to delete. Press

DEL

once, the LCD

shows DEL? Press

again to delete the entry.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Blank or faint screen

Check the line cord, AC Adaptor or replace batteries.

Batteries not lasting

Review new calls immediately to prevent the new call light flashing for extended

periods.

Based on ½ hour use per day, good alkaline batteries should last 2-3

months.

Caller ID will not work properly

Your phone stores up to 99 Call records. When the list is full a new incoming call will

automatically delete the oldest call record.

Phone will not ring

You may have too many communication devices connected to a single line.

A communication device can be a phone, a modem or fax machine. Disconnect some

devices.

Check that Ring Volume switch at rear of phone is not set to OFF.

How can the listening volume be increased?

Adjust the handset volume switch at the rear of the phone OR adjust the speaker

volume control on the right side of the phone.

No dial tone

Verify that you are using the correct line cord and that it is plugged in correctly.

Caller ID

Please check with your service provider that your subscription to this service is active.

If the screen is blank check the AC adaptor or replace batteries.

Please refer to our website for further information and frequently asked questions.

New Zealand - www.uniden.co.nz

Australia - www.uniden.com.au

Download from Www.Somanuals.com. All Manuals Search And Download.

WARRANTY

One Year Limited Warranty

UNIDEN FP204 CORDED PHONE

IMPORTANT Satisfactory evidence of the original purchase is required for warranty service

Important: Evidence of original purchase is required for warranty service.

Please refer to our Uniden website for any details or warranty durations offered in addition to those

Warrantor: Uniden Australia Pty Limited A.B.N. 58 00 865 498

contained below.

Uniden New Zealand Limited

Warrantor

Warranty is only valid in the original country of purchase.

The warrantor is either Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”) or

Uniden New Zealand Limited (“Uniden NZ”) as the case may be.

ELEMENT OF WARRANTY:

Terms of Warranty

Uniden warrants to the original retail owner for the duration of this warranty, its FP204

Uniden Aust/NZ warrants to the original retail purchaser only that the FP204 (“the Product”), will be

corded phone (herein after referred to as the Product), to be free from defects in

free from defects in materials and craftsmanship for the duration of the warranty period, subject to the

materials and craftsmanship with only the limitations or exclusions set out below.

limitations and exclusions set out below.

Warranty Period

WARRANTY DURATION:

This warranty to the original retail purchaser is only valid in the original country of purchase for a

This warranty to the original retail owner only, shall terminate and be of no further

effect 1year (12 months) after the date of original retail sale. This warranty will be

deemed invalid if the Product is;

Product first purchased either in Australia or New Zealand and will expire one (1) year from the date of

the original retail sale.

If a warranty claim is made, this warranty will not apply if the Product is found by Uniden to be:

(A) Damaged or not maintained as reasonable and necessary,

(A) Damaged or not maintained in a reasonable manner or as recommended in the relevant Uniden

(B) Modified, altered or used as part of any conversion kits, subassemblies, or any

Owner’s Manual;

configurations not sold by Uniden,

((BC)) IMmopdriofipeedr, layltienresdtaolrleudse,d as part of any conversion kits, subassemblies or any configurations not

sold by Uniden Aust or Uniden NZ;

(D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or

malfunction covered by this warranty,

(E) Used in conjunction with any equipment or parts or as part of a system not

(D) Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or

manufactured by Uniden, or

malfunction covered by this warranty; or

(F) Where the Serial Number label of the product has been removed or damaged

beyond recognition.

Warranty only valid in the country of original retail/sale.

(E) Used in conjunction with any equipment, parts or a system not manufactured by Uniden.

Parts Covered

This warranty covers the Product and included accessories.

User-generated Data

This warranty does not cover any claimed loss of or damage to user-generated data (including but

PARTS COVERED:

This warranty covers for one (1) year, the Product and included accessories.

without limitation phone numbers, addresses and images) that may be stored on your Product.

Statement of Remedy

If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion,

STATEMENT OF REMEDY:

In the event that the Product does not conform to this warranty at any time while this

will either repair the defect or replace the Product without any charge for parts or service. This

warranty does not include any reimbursement or payment of any consequential damages claimed to

warranty is in effect, the warrantor at its discretion, will repair the defect or replace the

Product and return it to you without charge for parts or service. This warranty does not

arise from a Product’s failure to comply with the warranty.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

provide for reimbursement or payment of incidental or consequential damages. This

EXPRESS WARRANTY is in addition to and does not in any way affect your rights under

You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

the TRADE PRACTICES ACT 1974 (Cth) (Australia) or the CONSUMER GUARANTEES ACT

(New Zealand).

goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to and sits alongside your rights under either the COMPETITION AND

CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as

PROCEDURE FOR OBTAINING PERFORMANCE OR WARRANTY:

In the event that the Product does not conform to this warranty, the Product should be

shipped or delivered, freight pre-paid, with evidence of original purchase (e.g. a copy of

the case may be, none of which can be excluded.

Procedure for Obtaining Warranty Service

Depending on the country in which the Product was first purchased, if you believe that your Product

the sales docket), to the warrantor at:

does not conform with this warranty, you should deliver the Product, together with satisfactory

UNIDEN AUSTRALIA

SERVICE DIVISION

UNIDEN NEW ZEALAND LIMITED

SERVICE DIVISION

evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses

shown below. You should contact Uniden regarding any compensation that may be payable for your

e3x4p5enPsersinincceusrrHedigihnwmaayk,ing a warranty clai1m5.0PrHioarrtroisdeRliovaerdy,, we recommend that you make a backup

copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged

Rockdale NSW 2216

Fax (02) 9599 3278

East Tamaki, Auckland

Fax (09) 274 4253

during warranty service.

UwNwwID.uEnNidAenU.ScTomRA.aLuIA PTY LTD

Service Division

www.uniden.UcNo.InDzEN NEW ZEALAND LTD

Service Division

345 Princes Highway,

150 Harris Road, East Tamaki

Customers in other States should ship or deliver the Product freight pre-paid to their

Rockdale, NSW 2216

nearest Uniden Authorized Repair Centre (Contac^At^uU^cn^ki^ladⁿe^dn²f⁰o¹r³the nearest Warranty

Agent to you).

Phone number: 1300 366 895

Phone number: (09) 273 8377

Email address: [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

Telex Projector Firefly P200 User Manual
Toastmaster Food Warmer TTS2 User Manual
Toshiba All in One Printer e STUDIO200L 230L User Manual
Tricity Bendix Freezer TB 100 FF User Manual
Tripp Lite Network Cables P753 010 User Manual
Valcom Speaker V 1220 User Manual
Vent a Hood Ventilation Hood CLH9 User Manual
Video Products Computer Hardware SE DVI 8 LC User Manual
VistaQuest Digital Camera VQ 5015 User Manual
Vivotek Security Camera 7530D User Manual