EXI 4246
Download from Www.Somanuals.com. All Manuals Search And Download.
EXI4246
Step 3 Set up the Base
Step 5 Connect to the Phone Line
Additional Features
Step 1 Check the Package Contents
For more information on these and
other features, please refer to your
Owner's Manual. For your
Plug one end of the
telephone cord into
the base TEL LINE
jack.
Plug the AC adapter cord to
Make sure your cordless phone's
packaging includes the following items.
the DC IN 9V jack (yellow).
convenience, listed below are
important features that will help
you set up your new cordless phone.
Route thhe cord.
Base
Handset
AC adapter
Handset/Base Set up:
Plug the other end into the
telephone wall jack.
-
Adjust the Earpiece
Volume → P.19
Belt Clip Rechargeable
battery
Also included: • Owner's manual
Telephone
cord
-
-
Set the Ringer Volume → P.17
Set Tone/Pulse Dialing → P.16
Step 6 Make & Receive Calls
To Make a Call
Step 2 Install Handset Battery Pack and Charge
Plug the AC adapter to a
120V AC power outlet.
Press
talk/flash .
Listen for dial
tone.
Note
Use ONLY the Uniden recharge-
able battery pack supplied with
your new phone!
Caller ID:
Note
Use ONLY the Uniden AC adapter
supplied with your new phone!
Set Caller ID on Call Waiting
(CIDCW) → P.14
Remove the
cover.
Note: You must subscribe to Caller
ID services through your local
telephone provider to use Caller
ID and CIDCW.
Dial the desired
number.
Step 4 Charge the Handset
To Receive a Call
Place the handset in
the base.
Pick up the handset
and press talk/flash .
Make sure that
charge LED
Connect the
battery pack
with the cor-
rect polarity.
Refer to your Owner's Manual
for detailed operations.
illuminates.
For answers to questions and to
order genuine Uniden parts and
accessories 24 hours a day visit our
have any problems, you can also call
our Customer Hotline at 1-800-297-
1023, Mon-Fri 7 a.m. to 7 p.m., Sat/
Sun 9 a.m. to 5 p.m. CST. (Phone
support is closed on holidays.)
To Hang Up a Call
Press end or return
the handset to the
base.
ꢀꢀꢀꢀꢀ6QVCNꢀꢁꢀꢂꢂ
Replace the
cover.
Charge the handset 15-20 hours.
Fully charge the battery pack by placing the
handset in the base before using phone.
w w w . u n i d e n . c o m
Q U I C K R E F E R E N C E G U I D E [ 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXI4246
3° Paso Preparación de la base
5° Paso Conexión de la línea telefónica
Características adicionales
1
°
Paso Inspección del contenido del embalaje
Para más información sobre estas y otras
características, le rogamos que consulte
su Manual del usuario. Para su
Conecte un
Conecte el adaptador CA en el
extremo de la
línea telefónica
en el enchufe
TEL LINE en la
base.
Asegúrese de que haya recibido los siguientes
artículos en el paquete
enchufe (amarillo) DC IN 9V
.
conveniencia, hemos listado abajo unas
características importantes, las cuales le
ayudarán a programar su nuevo teléfono
inalámbrico de Uniden.
Pase el cable
Adaptador
Al enchufe telefónico
Al enchufeTEL LINE
Base
Receptor
CA
Cable de la línea telefónica
(suministrado)
Programación del receptor/base:
-
-
-
Ajuste del volumen del auricular
Conecte el otro extremo en el
enchufe telefónico de la pared.
Pinza para
la correa
Pila
Cable
A la toma CA
Al enchufe DC IN 9V
y del altavoz → P.19
recargable
telefónico
Programación del volumen del
timbre → P.17
Programación de la marcación
por tono/pulso → P.16
Además va incluido: • Manual del usuario
6° Paso Realización y recepción de llamadas
Para hacer una llamada
Adaptador CA
(suministrado)
2° Paso Instalación y carga de la pila para el receptor
Conecte el adaptador CA en
una toma de 120V CA.
Oprima
talk/flash .
Nota ¡Use SOLAMENTE el paquete de
pilas recargable de Uniden sumi-
nistrado con su nuevo teléfono!
Identificación de llamadas (Caller ID):
Programe la Identificación de llamadas
en Llamadas en espera (CIDCW)
Nota ¡Use SOLAMENTE el adaptador CA de
Uniden suministrado con su teléfono!
Espere por el tono
de marcación.
→
P.14
Quite la tapa.
Marque el
número deseado.
4° Paso Carga del receptor
Nota: Usted debe estar suscrito al
servicio de Identificación de llama-
das con su proveedor de telefonía
local para poder usar las caracterís-
ticas de Caller ID y de CIDCW
Para recibir una llamada
Coloque el receptor
en la base.
Asegúrese de que el
LED de carga se
ilumine.
Levante el receptor y
oprima
talk/flash .
Conecte el
paquete de
pilas con la
polaridad
correcta.
Consulte su manual del usuario para
operaciones más detalladas.
Para hacer preguntas u ordenar partes genu-
inas y accesorios de Uniden, llame a nuestra
línea para atención al cliente en el 1-800-
297-1023.
Para colgar una llamada
Oprima end o
devuelva el receptor
a la base.
Horario:
ꢀꢀꢀꢀꢀ6QVCNꢀꢁꢀꢂꢂ
Reponga la
tapa
Lunes - viernes: 7 de la mañana- 7 de la
tarde. Sábado/domingo: 9 de la mañana - 5
de la tarde. No habrá ayuda telefónica los
días festivos. O, visite nuestra página Web:
Cargue el receptor de 15 á 20 horas.
Cargue el paquete de pilas totalmente colocando
el receptor en la base antes de usar el teléfono.
w w w . u n i d e n . c o m
[ 2 ] Q U I C K R E F E R E N C E G U I D E
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Call Waiting
21
22
23
23
26
27
QUICK REFERENCE GUIDE
Welcome/Features
Controls and Functions
Terms Used in this Manual
Accessibility
1
4
5
6
7
Voice Mail Waiting Indicator
Using the Speed Dial Memory
Storing Names and Numbers in Speed Dial Memory
Storing Caller ID Messages in Speed Dial Memory
Making Calls from Speed Dial Memory
Caller ID and CIDCW (Caller ID on Call
Waiting)
Installing the Phone
8
28
29
30
31
31
32
33
35
A. Choose the Best Location
8
Viewing the Caller ID Message List
Deleting Information from the Caller ID List
Making a Call from the Caller ID List
Caller ID on Call Waiting (CIDCW)
B. Install the Rechargeable Battery Pack into the Handset
C. Connect the Base Unit and Charge the Handset
D. Mount the Base Unit on a Wall
Installing the Beltclip
9
10
11
12
13
Headset Installation
Changing the Digital Security Code
Note on Power Sources
General Information
Basic Setup
14
14
14
15
16
16
17
18
18
19
19
20
20
20
21
Activating AutoTalk
Activating Caller ID on Call Waiting
Entering Your Area Code
Choosing the Dialing Mode
Setting the Language
Troubleshooting
36
Liquid Damage
38
Precautions & Warranty
I.C. Notice
Index
39
41
42
43
Selecting the Ring Tone and Volume
Using Your Phone
Making and Receiving Calls
Redialing the Last Dialed Number
Adjusting the Earpiece Volume
Tone Dialing Switch-over
Traveling Out-of-Range
Memory List
Selecting a Different Channel
Find Handset
w w w . u n i d e n . c o m
[ 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of the Uniden cordless telephone. This phone is designed and
engineered to exacting standards for reliability, long life, and outstanding performance.
Welcome
Features
Note:Illustrations in this manual are used for explanation purposes. Some
illustrations in this manual may differ from the actual unit. The color of your
cordless phone may vary.
• 2.4GHz Extended Range Technology
• Caller ID/Caller ID on Call Waiting
• 3-Line Backlit LCD
• Trilingual Menu Displays
• 30 Caller ID Memory
• 10 Number Memory Dialing
• Last Number Redial
• Tone/Pulse Dialing
• Find Handset Key
• Earpiece/Ringer Volume Controls
• Mute or Turn Ringer Off
• Hearing Aid Compatible
• 20 Channel Auto Scan
• Desk or Wall Mountable
If you have any trouble with your phone, call our Customer Hotline at 1-800-297-1023,
Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.)
For more information on Uniden products and accessories, be sure to visit our web site:
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of
Uniden America Corporation.
w w w . u n i d e n . c o m
[ 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Functions
1. Handset antenna
2. Jack for optional headset
3. Beltclip hole
1
4. Ringer speaker
5. Handset battery compartment
6. Handset earpiece
7. LCD display
2
3
6
8.
/
/vol/
(earpiece volume, ringer
volume and scroll) key (pages 14, 17 and
19)
7
8
9
9. Call id/menu key (pages 14 and 28)
10. /tone/ key (left cursor)
(pages 20 and 23)
13
14
15
4
*
11. Redial/pause key (pages 19 and 25)
12. Select key (page 14)
13. Talk/flash key (pages 18 and 21)
14. End key (pages 18 and 19)
15. Memory key (page 23)
5
16
17
10
11
16. #/
(right cursor) key (page 23)
17. Delete/chan key (pages 20, 23 and 30)
18. Handset microphone
18
12
19. Handset charging contacts
19
w w w . u n i d e n . c o m
C O N T R O L S & F U N C T I O N S [ 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Base charging contacts
21. Find hs key (pages 21 and 32)
22. Charge/in use and VMWI
(Voice Mail Waiting Indicator) LED
23. DC IN 9V jack
24. Telephone line jack
20
21
22
23
24
Terms Used in this Manual
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has not
been pressed and there is no dial tone.
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.
• CID - Caller ID
• CIDCW - Caller ID on Call Waiting
w w w . u n i d e n . c o m
[ 6 ] T E R M S U S E D I N T H I S M A N U A L
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer
service assistance or if you have any questions about how Uniden's products accommodate persons with disabilities,
please call the accessibility voice/TTY line:
1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave a message, and
w w w . u n i d e n . c o m
A C C E S S I B I L I T Y [ 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Do the following steps:
note
A. Choose the Best Location
B. Install the Rechargeable Battery Pack into the Handset
C. Connect the Base Unit and Charge the Handset
D. Mount the Base Unit on a Wall
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
A. Choose the Best Location
When choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid noise sources such as a window by
a street with heavy traffic
Avoid television sets and other
electronic equipment
Avoid microwave ovens
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
Avoid excessive moisture,
extremely low temperatures, dust,
mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet (one
which is not connected to a switch).
• The base and handset should be kept away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For
better reception, place the base as high as possible.
• The base should be placed in an open area for optimum range and reception.
[ 8 ] I N S T A L L I N G T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
B. Install the Rechargeable Battery Pack into the Handset
The handset is powered by a rechargeable battery pack.
The battery recharges automatically when the handset is placed
in the base unit.
!
Use only the Uniden
(BT-905 or BT-1006)
rechargeable battery
pack supplied with your
cordless telephone.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into the
jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery and listen for a
click to insure connection.
3) Make sure you have a good connection by slightly pulling on
the battery wires. If the connection is secure, the battery
jack will remain in place.
4) Place the battery case cover back in the handset by sliding
it upwards until it clicks into place.
w w w . u n i d e n . c o m
I N S T A L L I N G T H E P H O N E [ 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Connect the Base Unit and Charge the Handset
1) Connect the AC adapter to the DC IN 9V jack and to
a standard 120V AC wall outlet.
Route thhe cord.
!
2) Place the handset in the base unit with the keypad
facing forward.
•Use only the supplied
AD-0001 AC adapter.
Do not use any other
AC adapter.
3) Make sure the charge/in use LED illuminates.
If the LED does not illuminate, check to see that the AC
adapter is plugged in and the handset makes good
contact with the base charging contacts.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
• Connect the AC adapter to a continuous power
supply.
• Place the base unit close to the AC outlet to
avoid long extension cords.
4) Charge your handset at least 15-20 hours before
plugging the phone line.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL
LINE jack and a telephone outlet.
If your telephone outlet isn't modular, contact
your telephone company for assistance.
Modular
[ 1 0 ] I N S T A L L I N G T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
D. Mount the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any
standard wall plate.
1
1) Plug the AC adapter to the DC IN 9V
3
jack.
2) Plug the AC adapter into a standard
120V AC wall outlet.
3) Plug the telephone line cord into the
TEL LINE jack.
5
5
4) Plug the telephone line cord into the
telephone outlet.
5) Align the mounting slots on the base
with the mounting posts on the wall.
Then push in and down until the
phone is firmly seated.
4
2
w w w . u n i d e n . c o m
I N S T A L L I N G T H E P H O N E [ 1 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the
wall.
• Try to mount your phone within 5 feet of a working phone jack to
avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of
the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will be
placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-
15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for
mounting the phone.
2) Refer to steps 1 through 5 on page 11 to mount the telephone.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
[ 1 2 ] I N S T A L L I N G T H E P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Headset Installation
Your phone may be used with an optional headset. To use this feature,
insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
by calling our Parts Department. See back cover page.)
w w w . u n i d e n . c o m
I N S T A L L I N G T H E P H O N E [ 1 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call
Waiting), Area Code, Dial Mode and Language.
Activating AutoTalk
AutoTalk allows you to answer the phone simply by removing the handset from the base. You
do not have to press any keys.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the select key to turn AutoTalk on.
3) Press the end key to complete the setting. The handset returns to standby mode.
Activating Caller ID on Call Waiting
Caller ID allows you to see the name and number of the calling party before you answer the
phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that
comes in when you are on the line.
You must subscribe to Caller ID service through your local telephone provider to use this
feature.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
[ 1 4 ] B A S I C S E T U P
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Press the /vol/
key to select CIDCW.
3) Press the select key to toggle and turn on Caller ID on Call Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your local area
code in your phone. If you get a call from within your area code, you'll only see the 7-digit
phone number. If you get a call from outside your area code, you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the /vol/
key twice to select Area Code.
3) Press the select key. If an area code was already stored, the
phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/chan key to backspace.
5) Press the select key. A confirmation tone sounds.
6) Press the end key to complete the setting. The handset returns to standby mode.
w w w . u n i d e n . c o m
B A S I C S E T U P [ 1 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Dialing Mode
Your phone can communicate with the telephone network in two different ways: tone dialing
and pulse dialing. These days, most phone networks use a method called tone dialing, so
your phone comes programmed for tone dialing.
note
If your phone company uses pulse dialing, you'll need to change your phone's dial mode.
There's an easy way to tell: try making a call. If your call connects, your phone's setting is
fine. If not, follow the steps below:
If your phone system
requires pulse dialing
and you need to send
DTMF tones during a
call, you can
temporarily switch over
to tone dialing. (Refer
to “Tone Dialing Switch-
over” on page 20.)
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the /vol/
key three times to select Dial.
3) Press the select key to set the phone to pulse dialing.
4) Press the end key to complete the setting. The handset returns to
standby mode.
Setting the Language
You can change the language the menu display uses. Choose from English, French, or
Spanish.
1) When the phone is in standby mode, press and hold the call id/
menu key. The following screen appears.
2) Press the /vol/
key four times to select Language.
[ 1 6 ] B A S I C S E T U P
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Press the select key to select Eng, Fr. or Esp.
4) Press the end key to complete the setting. The handset returns to
standby mode.
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
1) With the phone in standby mode, press the
/vol/ or
/vol/
key.
2) The phone will sound the different ring tones at different volumes. To turn the ringer off,
select Ringer Off.
3) When the phone sounds the ring tone and volume you wish to use, press the end key.
w w w . u n i d e n . c o m
B A S I C S E T U P [ 1 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
note
Making and Receiving Calls
Making a call
1) Remove the handset from the base.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Remove the handset from the base.
2) Dial the number.
3) Press the talk/flash key.
Receiving a call
1) Remove the handset from the base. (If AutoTalk is on, the phone will automatically
To turn on the AutoTalk
feature, see “Activating
AutoTalk” on page 14.
answer the call when you pick it up.)
2) Press the talk/flash key.
OR
1) If the handset is off the base, press the talk/flash key, the /tone/
key, the #/
key
*
or any number key. (AutoTalk is on.)
Hanging up
Press the end key or return the handset to the base.
[ 1 8 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Redialing the Last Dialed Number
1) Remove the handset from the base.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Press the redial/pause key.
OR
note
1) Remove the handset from the base.
2) Press the redial/pause key.
3) Press the talk/flash key.
Adjusting the Earpiece Volume
To change the earpiece volume, press the /vol/
or
/vol/
key during a call.
You can only mute the
handset ringer if the
handset is off the base
when the phone starts
ringing
Temporarily Mute Ringer
If the handset is off the base while an incoming call is
ringing, simply press the end key to mute the incoming
ring. The ringer will sound with the next incoming call.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 1 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus, etc.
note
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the /tone/
*
key. Any digits you enter from then on will be sent as tone
digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base, your call will terminate within one
minute.
The UltraClear PlusTM
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone´s
channel for clear operation. While using your phone, press the delete/chan key. Scanning
appears on the display, indicating the phone is changing to another channel. For more
information on interference, refer to "Radio Interference" on page 40.
different channels,
provides you with the
best possible reception
during all your
conversations.
[ 2 0 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Find Handset
To locate the handset, press the find hs key on the base. The
handset beeps for 60 seconds.
To cancel paging, press any key on the handset or the find hs
key on the base, or return the handset to the base.
Paging is also canceled when the phone receives an incoming
call.
Using Call Waiting
If you have Call Waiting, you can receive calls while on the
line.
1)If a call comes in while you are on the phone, you will
hear a call waiting tone. If you have CIDCW activated,
you will see the name and number of the incoming caller.
2)Press the talk/flash key to accept the waiting call. After
a short pause, you will hear the new caller.
3)To return to the original caller, press the talk/flash key
again.
You must subscribe to Call Waiting through your local telephone company.
w w w . u n i d e n . c o m
U S I N G Y O U R P H O N E [ 2 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail Waiting Indicator
If you subscribe to voice mail service, you can use your cordless telephone to access your
voice mailbox. The charge/in use LED on the base of your phone flashes whenever you have
messages waiting in your voice mailbox.
note
You must subscribe to
voice mail service from
your telephone company
in order to use this fea-
ture. The voice mail
company will provide
you with the access
number.
Just dial the access number supplied by your voice mail provider to enter your mailbox.
You can program your voice mail access number to a speed dial number.
If the voice mail waiting indicator remains on after you have retrieved your messages, press
and hold the find hs key for 5 seconds. This will reset the indicator.
[ 2 2 ] U S I N G Y O U R P H O N E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Using the Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in the handset. You
can dial these numbers with just a few key presses.
note
The speed dial memory is not limited to phone numbers. You can store any number (up to 20
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
For example, you can save your bank account number to speed dial memory. When you call
your bank's telephone teller service and are prompted to enter your account number, simply
press the memory key and the speed dial number where you stored your account number.
Then press the select key.
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the base, the
phone will return to
standby mode also.
Storing Names and Numbers in Speed Dial Memory
1) With the phone in standby mode, press the memory key.
2) Enter 0-9 to select the speed dial number where you would like to
store this entry. You can also scroll through the list with the
/
vol/ and
/vol/
keys. Press the select key twice.
3) Store Name appears and a cursor flashes indicating that the
phone is ready for the name to be entered.
If the selected speed dial number is already assigned, the Edit
screen appears. You can select Edit to edit this entry, select
Delete to erase this entry, or select Go Back to choose another
speed dial number.
w w w . u n i d e n . c o m
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Enter a name according to the instructions below, then press the select key. If no name is
required, go to step 5.
• The name can be up to 13 characters.
note
• Use the #/
and /tone/
keys to move the cursor to the desired location.
*
• Use the delete/chan key to delete characters as needed.
• Press and hold the delete/chan key to delete all the characters.
If the next character
uses the same number
key, you must press the
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order:
upper case letters first, lower case letters next and finally the number corresponding to
the key.
#/
key to move the
cursor over. Otherwise
the next time you press
the number key, it
If you make a mistake while entering a name
changes the character
that was previously set.
Use the /tone/
or #/
key to move the cursor to the incorrect character.
*
Press the delete/chan key to erase the wrong character. Then enter the correct character.
To delete all characters, press and hold the delete/chan key.
Number of times key is pressed
For example, to enter Movies.
keys
1
2
3
4
5
6
7
8
9
1) Press 6. Then press the #/
move the cursor to the right.
2) Press 6 six times.
key to
1
2abc
3def
3) Press 8 six times.
4ghi
5jkl
4) Press 4 six times.
6mno
5) Press 3 five times.
6) Press 7 eight times.
7pqrs
8tuv
9wxyz
0oper
[ 2 4 ] U S I N G T H E S P E E D D I A L M E M O R Y
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
5) Store Numberis displayed. The cursor flashes indicating that the
phone is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number can be
up to 20 digits.
If you need the phone to pause during the dialing sequence, press
the redial/pause key to insert a two-second delay between the
numbers. You can enter multiple pauses to increase the delay.
Each pause counts as a digit. The display shows a
pause.
P
for every
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.
7) Press the memory key. You will hear a confirmation tone, and the
following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the speed
dial memory entries.
8) Press the end key to exit memory setup mode. The phone returns
to standby.
w w w . u n i d e n . c o m
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID Messages in Speed Dial Memory
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory
dialing. For instructions on viewing the Caller ID Message list, see page 29.
note
1) Press the call id/menu key. Select the phone number to be stored
You cannot store a
Caller ID message if no
phone number appears
in the message.
from the Caller ID list by pressing the /vol/ or
/vol/
key.
2) Press the memory key.
3) Enter a number (0 - 9) or press the /vol/ or
/vol/
key to select the memory
location to be stored.
4) Press the select key. You hear a confirmation tone, and the
number is stored in memory. The display returns to the Caller ID
list.
If a number has already been stored in the selected memory
number location, a confirmation screen is displayed.
Press the
/vol/
key to select Yes. Press the select key to
overwrite. The display returns to the Caller ID list.
[ 2 6 ] U S I N G T H E S P E E D D I A L M E M O R Y
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Making Calls from Speed Dial Memory
1) Press the memory key. The handset displays your programmed
speed dial number.
2) Enter the number (0 - 9), or press the
/vol/ or
/vol/
key to select the speed dial number you would like to dial.
3) Press the talk/flash key. Talkand the number selected appear on
the display. Then the displayed number is dialed.
To cancel speed dialing
Press the end key to cancel speed dialing. The handset returns to standby mode.
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to
standby mode.
w w w . u n i d e n . c o m
U S I N G T H E S P E E D D I A L M E M O R Y [ 2 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID and CIDCW (Caller ID on Call Waiting)
You must subscribe to Caller ID service through your local telephone provider to use
this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s
name, phone number, date and time of call. The incoming call information is stored in the
Caller ID record. If the Caller ID service includes the caller´s name, the caller´s name appears
on the display (up to 15 letters).
note
•If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
The date and
time received
Caller's name
Caller's phone number
You may receive any one of the following messages:
•When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone number
and name do not
When invalid data is received
Incomplete Data
When a private name is received
When a private number is received
When a unknown name is received
Private Name
Private Number
Unknown Name
When a unknown number is received Unknown Number
appear. (This includes
international calls.)
Data errors appear as ¨ ¨.
•When the call is
received via a private
branch exchange
(PBX), the caller´s
phone number and
name may not appear.
[ 2 8 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You
can also view the Caller ID list during a call.
note
1) Press the call id/menu key. The summary screen displays the
•In Caller ID operation,
if no key is pressed for
more than 30 seconds,
an error tone sounds
and the telephone
returns to standby
mode.
number of new messages and total messages.
2) Use the /vol/
key to scroll through the messages from the
latest to the earliest, or use the /vol/ key to scroll through
the messages from the earliest to the latest.
•Each message can be
up to 15 characters for
the name and 15 digits
for the phone number.
3) Press the call id/menu key to return to talk mode, or press the end key to return to
standby mode.
•The number of calls
from the same Caller ID
appears next to the
received time. Once
you view the new
message, the number
will be cleared and
disappear.
•During a call, don't
press the end key, or
the call will be
disconnected.
w w w . u n i d e n . c o m
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 2 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Information from the Caller ID List
If the phone receives more Caller ID messages than it can store, the oldest one in the list is
automatically deleted. Caller ID data can also be deleted manually.
note
Deleting a Caller ID message
•While using the Delete
All?or Delete
1) Press the call id/menu key in standby mode. Find the message to
be deleted from the Caller ID list by pressing the
/vol/
or
Message? screen, if no
key is pressed for more
than 30 seconds, an
error tone sounds, and
the handset returns to
standby mode.
/vol/ key.
2) Press the delete/chan key.
3) Press the /vol/ or
/vol/
key to select Yes, and then
press the select key.
•If you get an incoming
call or page, the
deleting operation is
canceled, and you can
answer the call or
page.
Deleting all Caller ID names/numbers
1) With the phone in standby mode, press the call id/menu key.
2) Press the delete/chan key.
3) Press the /vol/ or
/vol/
key to select Yes, and then
press the select key.
You hear a confirmation tone and all stored Caller ID messages are
deleted.
[ 3 0 ] C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G )
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Making a Call from the Caller ID List
You can place a call from the Caller ID list.
note
1) Press the call id/menu key in standby mode. Select the phone
number that you want to dial by pressing the
/vol/
or
/
vol/ key.
You cannot make a call
from the Caller ID list if
your cordless phone is
connected to a private
branch exchange (PBX).
2) To have the phone dial a 1 before the displayed Caller ID number, press 1. To have the
phone dial the stored area code before the displayed Caller ID number, press 3.
3) Press the talk/flash key. The displayed phone number dials automatically.
Caller ID on Call Waiting (CIDCW)
With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller ID data
is displayed. To accept the waiting call, press the talk/flash key (see page 21).
w w w . u n i d e n . c o m
C A L L E R I D A N D C I D C W ( C A L L E R I D O N C A L L W A I T I N G ) [ 3 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by
TM
other equipment, the cordless phone provides AutoSecure (which electrically locks your phone
TM
when the handset is in the base) and Random Code digital security which automatically selects
one of over 262,000 digital security codes for the handset and base.
If the handset battery pack is completely discharged or the battery pack is removed, the digital
security code will be lost. If this happens, a new security code is set automatically the next time
the battery pack is charged. In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit, and leave the handset
in the base for more than 3 seconds. A new random security code is set.
[ 3 2 ] C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
Note on Power Sources
Low battery alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in
use, Low Battery appears on the LCD and none of the keys will operate.
If the phone is in use, Low Battery flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base unit for
charging.
Information stored in the phone's memory will be retained for 30 minutes after
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID
list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum
performance, be sure to return the handset to the base unit after a telephone call.
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. A replacement battery may be purchased by calling
Uniden’s Parts Department (see back cover page).
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden
battery model and Uniden adapter model specifically designated for this product.
Caution
Power Failure
During the period that the power is off, you will not
be able to make or receive calls with the telephone.
• Use only the specified Uniden battery pack (BT-905 or BT-1006).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
w w w . u n i d e n . c o m
N O T E O N P O W E R S O U R C E S [ 3 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Talk and Standby Times
With average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of
standby time. When your handset is not being used and is left off of the charging cradle, the battery will gradually
discharge. You can achieve optimum battery life and performance by returning the handset to the charging cradle
after each use. If the handset is left off of the charging cradle, the actual talk time duration will be reduced
respective to the amount of time the handset is off of the charging cradle.
Cleaning the battery charging contacts
To maintain a good charge, clean the charging contacts on
the handset once a month.
Dampen a cloth with plain water. Gently rub the damp
cloth over the charging contacts until all visible dirt is
removed. Dry the contacts thoroughly before returning the
handset to the base.
Caution
Do not use paint thinner, benzene,
alcohol, or other chemical products.
Doing so may discolor the surface of
the telephone and damage the finish.
[ 3 4 ] N O T E O N P O W E R S O U R C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10°C to +50°C (+14°F to +122°F)
AC Adapter Information
AC Adapter part number:
Input Voltage:
AD-0001
120V AC 60Hz
9V DC 210 mA
Output Voltage:
Battery Information
Battery part number:
Capacity:
BT-905
600mAh, 3.6V
BT-1006
500mAh, 3.6V
or
Frequency
924.516925 - 926.704425 MHz
2,405.155942 - 2,411.718441 MHz
•To avoid damage to the phone use only Uniden AD-0001 and BT-905 or BT-1006 with your phone.
•If the handset is left off the base, the actual talk mode duration will be reduced respective to the amount of time
the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call.
When the operating time becomes short, even after the battery is recharged, please replace the battery.
With normal usage, the battery should last about one year.
A replacement Uniden adapter or battery may be purchased by calling Uniden’s Parts Department (see back cover
page).
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
w w w . u n i d e n . c o m
G E N E R A L I N F O R M A T I O N [ 3 5 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm,
CST. Phone support is closed on holidays.)
Symptom
Suggestion
The charge/in use LED won't
• Make sure the AC adapter is plugged into the base and wall outlet.
illuminate when the handset is • Make sure the handset is properly seated in the base.
placed in the base.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak and/or
scratchy.
• Move the handset and/or base away from metal objects or appliances and try again.
• Press the delete/chan key in the talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
Can't make or receive calls.
• Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 32).
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
[ 3 6 ] T R O U B L E S H O O T I N G
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (see page 32).
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn't set to "off."
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Charge the handset.
• Your Caller ID service may not be active; contact your local telephone service provider.
Voice Message Indication does
not work.
• Contact your local telephone company to make sure that your telephone receives FSK message
signaling.
• Reset the indicator by pressing and holding the find hs key for 5 seconds.
w w w . u n i d e n . c o m
T R O U B L E S H O O T I N G [ 3 7 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.
Case
Action
If the handset or base is exposed to
moisture or liquid, but it only affects the
exterior plastic housing.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the
Handset:
plastic housing (i.e., liquid can be heard 1.Remove the battery cover and leave it off for ventilation
in the phone or liquid has entered the
handset battery compartment or vent
openings on the base).
2.Remove the battery pack by disconnecting
3.Leave the battery cover off and the battery pack disconnected for at least 3 days
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.
5.Recharge the handset’s battery pack for 20 hours before using again.
Base:
1.Disconnect the AC adapter from the base unit, cutting off electrical power.
2.Disconnect the telephone cord from the base unit.
3.Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call our
Customer Service Hotline at 1-800-297-1023.
[ 3 8 ] T R O U B L E S H O O T I N G
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Uniden works to reduce lead content in our PVC coated cords in
our product and accessories.
product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for
details.
Precautions!
Before you read anything else, please observe the following:
Warning!
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the
local telephone company. For products approved after July 23,
2001, the REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
Warning!
The cords on this products and/or accessories contain lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage
to the unit, DO NOT expose this unit to rain or moisture.
Important Safety Instructions
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
Rechargeable Nickel-Cadmium Battery Warning
•This equipment contains a rechargeable nickel-cadmium battery.
•Cadmium is a chemical known to the State of California to cause
cancer.
•The rechargeable nickel-cadmium battery contained in this
equipment may explode if disposed of in a fire.
•Do not short-circuit the battery.
•Do not charge the rechargeable nickel-cadmium battery used in
this equipment in any charger other than the one designed to
charge this battery as specified in the owner’s manual.
Using another charger may damage the battery or cause the
battery to explode.
1. Do not use this product near water, for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of
the leak.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair any
parts of the device except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact
the state public utility commission, public service commission or
corporation commission for information. This equipment is
hearing aid compatible.
Should you experience trouble with this equipment, please
contact Uniden customer service at 800-297-1023. If the
equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the
equipment until the problem is resolved.
4. Use only the power cord and batteries indicated in this manual.
Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible battery disposal instructions.
5. Do not disassemble any component of this product.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
SAVE THESE INSTRUCTIONS
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions. Do not
open or mutilate the battery, and disconnect the battery before
shipping this product.
•Uniden voluntarily participates in an RBRC® industry program to
collect and recycle nickel-cadmium batteries at the end of their
useful life, when taken out of service within the United States.
The RBRC® program provides a convenient alternative to placing
used nickel-cadmium batteries into the trash or municipal waste
stream, which is illegal in some areas.
•Through the RBRC® program, Uniden makes it easy for you to
drop off the used battery at local retailers of replacement nickel-
cadmium batteries. You may also contact your local recycling
center for information on where to return the used battery.
Please call 1-800-8-BATTERY for information on Ni-Cd battery
recycling in your area. Uniden's involvement in this program is
part of its commitment to protecting our environment and
conserving natural resources.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
An applicable Universal Service Order Codes (USOC) certification
for the jacks used in this equipment is provided (i.e., RJ11C) in
the packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this
NOTICE: According to telephone company reports, AC electrical
surges, typically resulting from lightning strikes, are very
destructive to telephone equipment connected to AC power
sources. To minimize damage from these types of surges, a surge
arrestor is recommended.
Changes or modifications to this product not expressly approved
by Uniden, or operation of this product in any way other than as
detailed by the owner's manual, could void your authority to
operate this product.
•RBRC® is a registered trademark of the Rechargeable Battery
Recycling Corporation.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
w w w . u n i d e n . c o m
P R E C A U T I O N S & W A R R A N T Y [ 3 9 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation. Privacy of communications, may not be
ensured when using this phone.
To insure the safety of users, the FCC has established criteria for
the amount of radio frequency energy various products may
produce depending on their intended usage. This product has been
tested and found to comply with the FCCís exposure criteria. For
body worn operation, the FCC RF exposure guidelines were also
met when used with the Uniden accessories supplied or designed
for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines and should be
avoided.
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow this exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion may
not apply to you.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between
the handset and base of your cordless telephone are accomplished
by means of radio waves which are broadcast over the open
airways.
LEGAL REMEDIES: This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain
that the Product is defective, pack the Product carefully
(preferably in its original packaging). Disconnect the battery from
the Product and separately secure the battery in its own separate
packaging within the shipping carton. The Product should include
all parts and accessories originally packaged with the Product.
Include evidence of original purchase and a note describing the
defect that has caused you to return it. The Product should be
shipped freight prepaid, by traceable means, to warrantor at:
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other
than your own cordless telephone unit. Consequently, any
communications using your cordless telephone may not be private.
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects
in materials and craftsmanship with only the limitations or
exclusions set out below.
Radio Interference
Radio interference may occasionally cause buzzing and humming
in your cordless handset, or clicking noises in the base. This
interference is caused by external sources such as TV, refrigerator,
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit
is NOT DEFECTIVE. If these noises continue and are too
distracting, please check around your home to see what
appliances may be causing the problem. In addition, we
recommend that the base not be plugged into a circuit that also
powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully
extended when needed.
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C)
improperly installed, (D) serviced or repaired by someone other
than an authorized Uniden service center for a defect or
malfunction covered by this warranty, (E) used in any conjunction
with equipment or parts or as part of any system not
manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this
product.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving
radio signals from another cordless telephone or other source of
interference. If you cannot eliminate this type of interference, you
need to change to a different channel.
Finally, it should be noted that some cordless telephones operate
at frequencies that may cause interference to nearby TVs and
VCRs. To minimize or prevent such interference, the base of the
cordless telephone should not be placed near or on top of a TV or
VCR. If interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the
interference.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in
effect, warrantor will either, at its option, repair or replace the
defective unit and return it to you without charge for parts,
service, or any other cost (except shipping and handling) incurred
by warrantor or its representatives in connection with the
performance of this warranty. Warrantor, at its option, may replace
the unit with a new or refurbished unit. THE LIMITED WARRANTY
SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
[ 4 0 ] P R E C A U T I O N S & W A R R A N T Y
Download from Www.Somanuals.com. All Manuals Search And Download.
w w w . u n i d e n . c o m
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. “Privacy of communications may not be ensured when using this telephone”.
w w w . u n i d e n . c o m
I . C . N O T I C E [ 4 1 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
E, F, G, H, I, J, K, L
Traveling out-of-range . . . . . . . 20
Troubleshooting . . . . . . . . . . . 36
Index
Earpiece volume . . . . . . . . . . . .19
Find handset . . . . . . . . . . . . . .21
General information . . . . . . . . .35
I.C. Notice . . . . . . . . . . . . . . .41
Installing the phone . . . . . . . . . .8
Interference . . . . . . . . . . . . . .40
Liquid damage . . . . . . . . . . . . .38
A
V, W, X, Y, Z
AC adapter information . . . . . . . 35
Wall mounting . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . 40
B
Basic setup . . . . . . . . . . . . . . 14
Battery pack
Information . . . . . . . . . . . . . 35
Installing . . . . . . . . . . . . . . . 9
Preparing and charging . . . . . . 9
Replacement and handling . . . 33
Beltclip installation . . . . . . . . . 12
M, N, O, P, Q
Making a call . . . . . . . . . . . . . .18
Package contents . . . . . . . . . . . .1
Precautions . . . . . . . . . . . . . . .39
Quick reference guide . . . . . . . . .1
C
Call waiting . . . . . . . . . . . . . . 21
Caller ID service . . . . . . . . . . . 28
Call waiting . . . . . . . . . . . . . 21
Deleting . . . . . . . . . . . . . . . 30
Making a call . . . . . . . . . . . . 31
Viewing . . . . . . . . . . . . . . . 29
Channel . . . . . . . . . . . . . . . . . 20
Charging the battery pack . . . . . 10
Cleaning contacts . . . . . . . . . . 34
Connect the base unit . . . . . . . 10
Controls and functions . . . . . . 5, 6
R
Receiving a call . . . . . . . . . . . .18
Redial . . . . . . . . . . . . . . . . . .19
Ringer tone . . . . . . . . . . . . . . .17
S
Speed dial memory
Making calls from speed dial
memory . . . . . . . . . . . . . .27
Storing names and numbers in
speed dial memory . . . . . . .23
D
T, U
Dial mode . . . . . . . . . . . . . . . 16
Digital security code . . . . . . . . 32
Talk and Standby Times . . . . . . .34
Technical information . . . . . . . .35
Tone dialing switch-over . . . . . .20
[ 4 2 ] I N D E X
w w w . u n i d e n . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory List
C
U
T
C
U
T
MEMORY LOCATION MEMO
Name Phone Number
MEMORY LOCATION MEMO
Name Phone Number
Memory
Location
Memory
Location
1*
2
6
7
3
8
4
9
5
10
C
U
T
C
U
T
MEMORY LOCATION MEMO
Name Phone Number
MEMORY LOCATION MEMO
Name Phone Number
Memory
Location
Memory
Location
1*
2
6
7
3
8
4
9
5
10
w w w . u n i d e n . c o m
[ 4 3 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
w w w . u n i d e n . c o m
[ 4 4 ]
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m.
to 5 p.m. CST. (Phone support is closed on holidays.)
Need a part?
To order headsets, additional handsets, replacement batteries or other accessories, visit
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents:
4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010
5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981
5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289
5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619
5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358
5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278
6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920
6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940
6,953,118 7,023,176
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
