Uniden Cordless Telephone EXT 1365 User Manual
O W N E R ’ S M A N U A L  
E X T 1 3 6 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Caller ID Message list  
Deleting information from the Caller ID list  
Using the Caller ID list  
Using “Caller ID on call waiting“ service  
Call Waiting Features  
37  
38  
40  
42  
43  
General Information  
Precautions  
54  
55  
55  
55  
56  
56  
57  
59  
Important Safety Instructions  
Important Electrical Considerations  
Installation Considerations  
One Year Limited Warranty  
Technical Information  
Index  
Advanced Calling Features  
Accessing calling features  
Pre-programmed calling features  
Adding new features  
44  
45  
47  
Additional Information  
Changing the digital security code  
Installing the beltclip  
Headset installation  
Note on power sources  
Maintenance  
49  
50  
50  
51  
51  
52  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Features  
Congratulations on your purchase of the EXT 1365 cordless telephone. This  
phone is designed for reliability, long life and outstanding performance  
utilizing the latest in 2.4 GHz Spread Spectrum Technology.  
Note: Some illustrations in this manual may differ from the actual unit for  
explanation purposes.  
• 2.4 GHz Spread Spectrum Technology  
• Secure Digital Transmission  
• Caller ID and Call Waiting Caller ID  
• Advanced Caller ID with Call Waiting Options  
• 50 Number Caller ID Memory  
• 20 Number Memory  
• 3 Line Backlit Display  
• 3 Redial Memories (up to 32 digit)  
• Flash and Pause  
• Bilingual Language Option  
• Pulse / Tone Dialing  
• 10 Day Standby Battery Life  
• 6 Hour Talk Time  
• Handset Earpiece and Ringer Volume Control  
• Base Speakerphone with Keypad  
• 3-Way Conference Operation  
• Dual Keypad Operation  
• 35 Channels  
• Voice Message Waiting Indicator  
[ 2 ]  
I N TR O D U C TI O N / FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Spread Spectrum Technology  
utilizes a “wider frequency band“ vs. a  
“single narrow band“ used in standard digital transmissions. The 2.4 GHz  
frequency range was recently released to commercial communications. The  
result is a more secure conversation with the clarity of digital sound, extended  
range, and minimal interference from other cordless phones.  
Random CodeTM  
digital security automatically selects one of approx. 65,000  
codes for the handset and base.  
These features enhance your phone´s security and also prevents unauthorized  
calls as a result of your phone being activated by other equipment.  
UnidenTM is a registered trademark of Uniden America Corporation.  
AutoTalkTM and Random CodeTM are trademarks of Uniden America Corporation.  
Throughout this manual, terms such as Standby Mode and Talk Mode are  
used. Below is the terminology explanation:  
Standby Mode  
•
•
- The handset is not in use, off of the base and  
has not been pressed. A dial tone is not present and the display  
is blank.  
Talk Mode  
- The handset is not on the base and  
has been pressed  
enabling a dial tone. Talkappears on the display.  
I N TR O D U C TI O N / FE ATU R E S [ 3 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and Functions  
1. Handset Antenna  
2. Headset Jack Cover  
3. Handset Battery Compartment  
4. Handset Earpiece  
5. LCD Display  
1
2
6. Volume Up Key  
7. Memory Key  
4
8. Talk Key  
5
6
7
8
9
9. Volume Down Key  
10. Tone/Left Cursor Key  
11. Redial/Pause Key  
12. Menu Key  
13. Handset Microphone  
14. V.mail Key  
14  
15  
16  
10  
3
15. Caller ID/Flash Key  
16. Right Cursor Key  
17. Delete/Intercom Key  
18. Select/Channel Key  
19. Handset Charging Contacts  
11  
12  
13  
17  
18  
19  
[ 4 ]  
C O N TR O LS A N D FU N C TI O N S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. Base Charging Contacts  
21. Base Speaker  
22. Tone Key  
23. Speaker LED  
24. Status LED  
23  
24  
25  
26  
27  
28  
20  
25. Voice Mail LED  
26. Intercom Key  
27. Redial/Pause Key  
28. Flash Key  
29. Base Antenna  
30. Voice Mail Key  
31. Speaker Key  
21  
22  
32  
33  
29  
30  
31  
32. Base Speaker Volume Adjust  
33. Base Microphone  
34. Base Ringer Switch  
35. Pulse-Tone Switch  
36. DC Power Input  
37. Phone Jack  
34 35 36 37  
C O N TR O LS A N D FU N C TI O N S [ 5 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read This First  
This cordless telephone must be set up before use. Follow these steps:  
Step 1 (page 7)  
Unpack the telephone and accessories.  
Step 2 (page 8)  
Next, choose the best location to  
set up the base unit.  
Base unit  
About the digital security code  
Step 3 (page 9 to 11)  
This cordless telephone uses a digital  
security code to prevent unauthorized  
access to your base unit. This  
security code prevents other cordless  
handsets from making calls through  
your base unit.  
Then, insert the battery pack into the  
handset. Connect the base unit. You  
15-20  
must charge the battery pack for  
hours before plugging into the phone  
line and using the phone  
Handset  
.
A random security code will be  
assigned automatically between your  
base unit and handset when you  
charge the battery pack for the  
first time.  
Step 4 (page 12 to 13)  
Finally, set the Caller ID options and  
store your area code in the memory to  
use the Caller ID service.  
Note:  
Skip the area code setting if your  
Handset  
If you want to reset the security  
code, see page 49.  
calling area requires 10-digit dialing.  
[ 6 ]  
G E TTI N G S TA R TE D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Package Contents  
Make sure you have received the following items in the package.  
If any of these items are missing or damaged, contact the Uniden Parts  
Department (see below).  
• Base unit  
• Handset  
• AC adapter (AD-312)  
• Rechargeable  
battery pack  
(BT-800)  
• This Owner´s Manual  
• Quick Reference Guide  
• Telephone line cord  
• Beltclip  
Uniden Parts Department  
(800) 554-3988  
Hours: M-F 7:00 AM to 5:00 PM CST.  
We can also be reached on the web at www.uniden.com  
G E TTI N G S TA R TE D [ 7 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Base Unit  
Do the following steps:  
A. Choose the best location  
B. Install the battrery pack  
C. Connect the base unit  
D. Choose the dialing mode  
A. Choose the best location  
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included  
in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important  
guidelines you should consider:  
Avoid noise sources such as a window  
by a street with heavy traffic  
Avoid heat sources, such as  
radiators, air ducts, and sunlight  
Avoid microwave ovens  
Avoid excessive moisture, extremely low  
temperatures, dust, mechanical vibration, or shock  
Avoid television sets and  
other electronic equipment  
Avoid personal computers  
Avoid other cordless telephones  
Choose a central location  
15-20  
• After installing the battery pack in the handset, you should charge your handset for  
hours before using the phone  
. Once the handset battery pack is fully charged, you may connect  
the telephone line cord to the base and telephone wall outlet.  
• The location should be close to both a phone jack and a continuous power outlet which is  
not switchable.  
• Keep the base and handset away from sources of electrical noise such as motors and  
fluorescent lighting.  
• Be sure there is sufficient space to raise the base antenna to a vertical position.  
[ 8 ]  
G E TTI N G S TA R TE D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B. Installing the Handset Battery Pack  
Charge the battery pack for 15-20 hhours before  
plugging the phone line into your phone.  
The plastic connectors will  
fit together only one way.  
Make sure the battery´s  
connector is properly  
aligned.  
1
2
Press in on the battery cover release and slide the  
cover down until it comes off.  
Connect the battery pack connector with the  
correct polarity (black and red wires), then insert  
the battery pack into the battery compartment.  
3
Slide the battery cover forward until it snaps  
into place.  
4
5
Place the handset on the base.  
status  
Make sure that the “  
“ LED lights. If the LED  
doesn´t light, check to see that the AC adapter is  
plugged in and that the handset makes good  
contact with the base charging contacts.  
Use only the Uniden Battery (BT-800) supplied with  
your phone. Replacement batteries are also available  
through the Uniden Parts Department (See page 7).  
G E TTI N G S TA R TE D [ 9 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery use time (per charge)  
From fully charged  
• 6 hours continuous use  
• 10 days when the handset is in the standby mode  
• Even when the battery  
pack is not being used,  
it will gradually  
When the battery charge becomes low  
discharge over a long  
period of time. For  
optimum performance,  
be sure to return the  
handset to the base unit  
after each telephone  
call.  
When the voltage of battery pack in the handset is very low and needs to be  
charged, the phone is programmed to eliminate functions in order to save power.  
If the battery charge becomes low, “Low Battery“  
appears on the LCD. If the phone is in use, the handset  
beeps. Complete your conversation as quickly as possible  
and return the handset to the base unit for charging.  
• The built-in memory  
backup can hold  
numbers and names  
stored in the memory  
even if the battery is  
completely discharged.  
Cleaning the charging contacts  
To maintain a good charge, it is important  
to clean the battery contacts on the  
handset and base unit with a dry cloth or a  
pencil eraser about once a month.  
• If you must replace the  
battery pack during a  
telephone call,  
Do not use any liquids or solvents.  
complete the  
replacement of the  
battery pack within  
30 seconds, and you  
can return to the  
original call.  
[ 10 ] G E TTI N G S TA R TE D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. Connect the base unit  
1
2
3
DC IN 9V  
jack  
Connect the AC adapter to the  
and to a standard 120V AC wall outlet.  
Set the base unit on a desk or tabletop and  
place the handset on the base unit as shown.  
Then raise the antenna to a vertical position.  
After installing the battery pack in the  
• Place the power cord so  
it does not create a trip  
hazard or where it could  
become chafed and  
create a fire or electrical  
hazard.  
15-20  
handset, charge your handset at least  
hours before plugging into the phone line  
Once the handset battery pack is fully  
charged, connect the telephone line cord  
to the base and telephone wall outlet.  
.
• Use only the supplied  
AD-312 AC adapter. Do  
not use any other AC  
adapter.  
4
TEL LINE  
jack and to a  
Connect the telephone line cord to the  
telephone outlet.  
If your telephone outlet isn´t modular, contact  
your telephone company for assistance.  
• Connect the AC adapter  
to a continuous power  
supply.  
Modular  
D. Choose the dialing mode  
• Place the base unit close  
to the AC outlet so that  
you can unplug the AC  
adapter easily.  
PULSE-TONE  
Depending on your dialing system, set the  
switch as follows:  
If your dialing system is  
Set the switch to  
TONE  
Tone  
PULSE  
Pulse  
PULSE-TONE  
If you aren´t sure of your dialing system, make a trial call with the  
TONE  
switch set to  
PULSE  
. If the call connects, leave the switch as is; otherwise, set to  
.
G E TTI N G S TA R TE D [ 11 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Caller ID Options/Language  
There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller  
ID on Call Waiting), and Area Code. See page 13 for Area Code setup instructions.  
AutoTalkTM  
allows you to answer the phone without pressing the  
button. If the  
You must subscribe to  
phone rings when AutoTalk is on, simply remove the handset from the base and the  
phone automatically answers the call. Or if the handset is not on the base, press  
any key to answer the call. If the phone rings when AutoTalk is off, you must  
Caller ID on Call Waiting in  
order to use this feature.  
press  
to answer the call.  
Caller ID on Call Waiting (CIDCW)  
performs the same as regular Caller ID on a call  
waiting number. Call waiting options allow you to handle call waiting calls in seven  
different ways. (See page 43.)  
To change your Caller ID options/Language:  
1
2
Press and hold  
. The following screen appears.  
Use and  
or a number key (1-4) to move the  
pointer to the selection that you would like to change.  
Press  
“ Auto Talk“ .  
to choose “On“ and “Off“ for  
For “CIDCW“, choose “On“ , “Off“, or “Opt“ depending upon the type of  
service to which you subscribe.  
3
4
To set up the language of your display, press  
or the  
number 4 key to move the pointer to “Language“ .  
Press  
“ Fr.“(French).  
to select “Eng“(English) or  
After you have made your Caller ID selections, press  
handset to the base.  
and return the  
[ 12 ] G E TTI N G S TA R TE D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Entering Your Area Code  
If you enter a 3-digit area code number in the “Area Code“ option, your  
local area code does not appear in Caller ID messages. Do not program this  
option if your calling area requires 10-digit dialing. When reviewing Caller ID  
messages, you will see only the local seven digit number. For calls received  
from outside your local area code, you will see a full 10-digit number.  
If your calling area requires  
10-digit dialing, do not  
program this option.  
1
2
3
When the phone is in the standby mode, press and hold  
. The Caller ID setting screen appears.  
Press  
to select “Area Code“ .  
Press  
.
4
5
6
Use the number keypad (  
to  
) to enter the 3-digit area code.  
Press  
Press  
. A tone sounds and the displayed area code is entered.  
to complete the setting. Or return the handset to the base  
unit to complete the setting. The handset returns to the standby mode.  
When the area code has already been stored in memory, the  
stored area code will be displayed. To change it, use the  
and number keypad to enter the new area  
code. Then press  
To complete the setting, press  
handset to the base unit.  
.
or return the  
G E TTI N G S TA R TE D [ 13 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making a Call  
Dialing from Standby Mode  
1
Enter the phone number and press  
flashes on the display.  
. “Talk“  
• Press  
you enter a wrong  
if  
Then current volume setting is displayed.  
number at step 1. To  
delete all the numbers  
that you have entered,  
press and hold  
Example:  
• Volume Medium  
until the  
• Volume Medium and Ringer Off  
display clears.  
• You must press a key  
within 20 seconds or the  
phone will return to  
standby.  
2
3
The number is dialed. After about 5 seconds, the  
call-time display appears.  
• Refer to terminology  
explanation on Page 3,  
if necessary.  
To hang up, press  
or place the handset on the base.  
The call-time will be displayed for about 5 seconds.  
Other Operations  
To  
Do this  
Press  
Press  
Press  
To improve the reception  
To adjust the earpiece volume  
To temporarily switch to tone dial  
(when the base is set to pulse mode)  
during a call.  
during a call.  
. The following numbers  
or  
will be sent as tone dialing.  
To enter a pause within the  
dialing sequence  
Press  
. “P“ appears on the display  
which represents a pause.  
[ 14 ] B A S I C S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dialing from Talk Mode  
1
Press  
. “Talk“ flashes on the display.  
Then current volume setting is displayed.  
If you set the ringer to off, “Ringer Off“  
appears on the display.  
2
3
Dial the phone number.  
Example  
: Enter 8002971023  
To hang up, press  
or place the handset on the base.  
The call-time will be displayed for about 5 seconds.  
From the base  
1
2
3
Press  
.
Dial the number on the keypad.  
When you finish the call, press  
The base microphone is  
located under the phone.  
Position yourself as near to  
the base as possible and  
speak clearly.  
to hang up.  
B A S I C S [ 15 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving a Call  
From the handset  
1
The phone rings.  
2
Press  
. “Talk“ and the volume setting appears  
on the display.  
If you set the ringer to off, “Ringer Off“  
appears on the display.  
3
4
Talk with the caller.  
To hang up, press  
the base. The call-time will be displayed for about  
5 seconds.  
or place the handset on  
AutoTalk when ringing  
When the AutoTalk setting is on and there is an incoming call, simply lift the  
handset from the base unit to answer the phone. See “Setting Caller ID options“  
on page 12 for more details.  
Any key answer when ringing  
When the AutoTalk setting is on and the handset is off the base, press any  
handset key to answer the incoming call.  
Call Waiting  
Note: You must subscribe to Call Waiting service to use this feature.  
When a call is received during a telephone call already in progress, press  
to switch to the new call. If you also subscribe to Call Waiting on Caller ID, you  
will see the name and number of the caller in call waiting. (See page 42.)  
[ 16 ] B A S I C S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
From the base  
1
status  
LED on the  
The phone rings. The  
base flashes.  
2
3
Press  
and begin speaking.  
The base microphone is  
located under the phone.  
Position yourself as near to  
the base as possible and  
speak clearly.  
To hang up, press  
.
Microphone  
B A S I C S [ 17 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Volume  
Handset ringer tone and volume  
Press  
or  
in standby mode to select one of four ringer  
tones and volume combinations. (Refer to terminology  
explanation on page 3 if necessary.)  
Earpiece volume  
Pressing  
or  
during a call will change the earpiece volume of the handset.  
This setting will remain in effect after the telephone call has ended.  
When you press  
in Maximum mode or  
in Low mode, an error tone sounds.  
Handset ringer off  
During the standby mode or tone/volume setting, press  
and hold until “Ringer Off“ appears.  
To turn the ringer back on, simply press  
or  
.
“ Ringer A High“ appears.  
Base ringer switch  
This switch turns the base ringer on or off.  
Base speaker volume  
To control the speaker volume of the base, adjust the  
volume slide control as desired.  
[ 18 ] B A S I C S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Redialing a Call  
The last three phone numbers dialed can be quickly redialed.  
Redialing from Standby Mode  
• If the number exceeds  
32 digits, only the  
1
Press  
.
first 32 digits are  
The phone number that was last dialed appears on the display.  
retained for redialing.  
2
Press  
again.  
Each press of  
will display one of the last three numbers dialed.  
• Press and hold  
to delete  
the displayed redial  
number.  
Most  
recent  
• Refer to terminology  
explanation on Page 3,  
if necessary.  
3
4
5
Press  
. “Talk“ appears on the display, then the volume setting  
is displayed.  
The selected number is dialed. After about 5 seconds, the call-time  
display appears.  
To hang up, press  
will be displayed for about 5 seconds.  
or place the handset on the base. The call-time  
B A S I C S [ 19 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Redial from Talk Mode  
1
Press  
. “Talk“ appears on the display.  
Only the last number  
dialed can be accessed  
If you set the ringer to off, “ Ringer Off“ appears on the display.  
after  
has been  
pressed.  
2
3
Press  
. The last number dialed will be displayed and redialed.  
To hang up, press  
be displayed for about 5 seconds.  
or place the handset on the base. The call-time will  
From the Base  
1
2
3
To call the last number dialed from the base,  
press  
.
Press  
. The last number dialed from the  
base is redialed.  
To hang up, press  
.
Traveling Out-of-Range  
During a call, as you begin to move your handset too far from your base unit,  
noise increases. If you pass the range limits of the base unit, your call will  
terminate within 30 seconds.  
[ 20 ] B A S I C S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using One Touch Voice Mail Access  
If you subscribe to voice mail service, you can use your EXT 1365 to access  
your voice mailbox. The message light on the base of your phone flashes  
whenever you have messages waiting in your voice mailbox. Just program the  
key with your access number and you can get your messages at the  
touch of a button. (The voice mail service provider will supply you with the  
access number. This number may be simply a phone number. Refer to the  
provider´s literature.)  
You must subscribe to  
voice mail service from  
your telephone company  
in order to use this  
feature. The voice mail  
service company will  
provide you with the  
access number.  
Programming your Voice Mail Access Number  
1
On the handset, press and hold  
seconds. The following screen appears:  
for about 2  
Store Number  
If you have previously stored a number, the following  
display appears:  
Edit Number  
Use the  
and  
to move the pointer to the “Edit Delete Number  
Go Back  
Number“option. Press  
to select the option.  
2
3
Enter your personal access number.  
Press  
. You will hear a confirmation tone  
Number Stored  
and the following display appears:  
With the Base  
1
2
3
Press and hold  
Enter your personal access number.  
Press again. You will hear a confirmation tone.  
in standby mode.  
B A S I C S [ 21 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dialing your Voice Mail Service  
Once you´ve programmed your personal access number, you can dial your  
mailbox with the touch of a button. When you have messages, simply pick up  
the handset and press  
. Or press  
, listen for the dial tone, and  
then press . If you have not entered the access number or it has been  
deleted, when you press  
, an error tone sounds.  
Message Waiting Indicator  
voice mail  
The  
LED indicator on the base is designed to work with voice mail  
service provided by your local telephone company. The indicator flashes when  
you have new voice messages.  
You may need to occasionally reset the indicator if it remains on after you´ve  
retrieved your messages. To reset the indicator, return the handset to the  
base and press and hold  
.
Deleting the Voice Mail Number  
1
Press and hold  
in standby mode. You will hear a  
Edit Number  
Delete Number  
Go Back  
confirmation tone.  
2
Use the  
or  
to move the pointer to “Delete  
Number“ .  
3
4
5
Press  
Press  
Press  
.
to select “Yes“ .  
or  
. You will hear a  
confirmation tone.  
With the base  
1
2
Press and hold  
Press  
in standby mode.  
again. You will hear a confirmation tone.  
[ 22 ] B A S I C S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Phone Numbers and Names  
Memory Dialing allows you to dial a number using just a few key presses.  
Your EXT 1365 stores up to 20 names/numbers in the handset.  
In memory dialing  
With the handset  
operation, you must press  
a key within 20 seconds or  
the phone will return to  
standby. If you return the  
handset to the base, the  
phone will return to  
1
Press and hold  
is displayed in standby mode.  
until “Memory Store“  
2
Press  
and  
or enter a two-digit number (01 - 20)  
standby also.  
to select the memory location where you would like  
to store the number.  
3
Press  
.
The following screen appears and a cursor flashes  
indicating that the display is ready for the name  
to be entered.  
If this screen appears, the selected memory location is  
already stored. Then you must either change the entry  
in this location, clear the entry in this location, or  
select “Go Back“ to choose another location.  
4
To enter a name (up to 13 characters), use the number keys.  
• See the “Steps for entering names and special characters “ .  
(See pages 25-26.)  
• Use  
and  
to move the cursor to the desired location.  
M E M O RY D I A LI N G [ 23 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Use  
to delete characters as needed.  
to delete all the characters.  
• Press and hold  
• If a name is not required, go to step 5.  
5
6
Press  
.
“ Store Number“ is displayed. The cursor flashes  
indicating that the display is ready for the number  
to be entered.  
The pause feature is useful  
for long distance calling,  
credit card dialing, or  
sequences that require a  
pause between digits.  
Use the number keypad to enter the phone number.  
The phone number cannot exceed 20 digits.  
• Use  
to enter pause in the dialing sequence.  
The display shows a “P“. Each pause counts as one  
digit and represents a two second delay of time  
between the digits.  
• Use  
to delete digits as needed.  
7
Press  
.
The handset beeps and displays the confirmation screen.  
Memory storage is complete.  
For example, if you store a name and number into  
memory location number 07, the display shows  
“ Memory07 Stored“. After about 2 seconds,  
“ Memory Store“ is displayed.  
8
Press  
to return to standby mode.  
[ 24 ] M E M O RY D I A LI N G  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steps for Entering Names and Special Characters  
Refer to the letters on the number keys to select the desired characters.  
With each press of a numeric key, the displayed character appears in the  
following order: Upper case letters first, lower case letters next and finally  
the number corresponding to the key.  
Number of times key is pressed  
keys  
1
2
3
4
5
6
7
8
9
1
A
D
G
J
M
P
T
W
*
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
5
6
r
8
y
s
z
7
9
(blank) 0  
If you make a mistake while entering a name  
Use or to move the cursor to the incorrect character. Press  
to erase the wrong character, then enter the correct character.  
To delete all characters, press and hold  
.
M E M O RY D I A LI N G [ 25 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uniden  
For example, to enter  
:
1
2
Press and hold  
in standby mode.  
Enter a two-digit number or press  
number.  
,
to select a memory location  
3
4
5
6
7
Press  
Press  
Press  
Press  
Press  
.
twice.  
five times.  
six times.  
four times, then press  
to move the cursor to the right.  
If the next character uses the same number key, you must press  
to move  
the cursor over. Otherwise the next time you press the number key, it changes  
the character that was previously set.  
8
9
Press  
Press  
five times.  
five times.  
10  
When finished, Press  
.
To continue to store the telephone number, proceed to step 6 on page 24.  
[ 26 ] M E M O RY D I A LI N G  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Calls with Memory Dialing  
Memory dialing from Standby Mode  
1
Press  
.
The handset displays your programmed  
memory locations.  
• If you press  
before  
, you can confirm  
the name and number  
stored in the selected  
memory location. To exit  
this mode, press and  
hold  
2
3
Press  
and  
or enter a two-digit number (01 - 20)  
to select the memory location you would like to dial.  
Press  
. “Talk“ and the volume setting appear on  
until the display clears.  
the display. Then the displayed number is dialed.  
• To exit the memory  
mode without dialing,  
press  
.
Display a Programmed Number  
Use  
and  
to toggle between the names display  
and the numbers display.  
Program number  
Program name  
When the stored phone number has 14 or more digits,  
“ \“ is displayed next to the 12th digit. Press to  
see the extra digits and to return.  
M E M O RY D I A LI N G [ 27 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory dialing from Talk Mode  
1
Press  
. “Talk“ and the  
volume setting appears.  
If you set the ringer to off, “ Ringer Off“ appears on the display.  
2
3
Press  
.
Enter a two-digit number (01 - 20) to select the  
memory location of the desired phone number.  
The selected phone number is displayed. Then the  
number is dialed.  
4
To hang up, press  
.
[ 28 ] M E M O RY D I A LI N G  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing a Stored Name and/or Phone Number  
1
2
3
Press and hold  
in standby mode until  
“ Memory Store“is displayed.  
Press  
and  
or enter a two-digit number (01 - 20)  
to select the memory location you would like to edit.  
Press  
.
The following screen appears with the memory location  
number that you have selected in the display.  
4
Press  
or  
to select “Edit Memory“, then press  
. The following screen appears.  
The cursor flashes indicating that the display is ready  
for the name to be edited. When a name has not been  
stored, the cursor appears at the beginning of the  
second line.  
5
6
Press the number keypad,  
to edit the name. (See page 26.)  
To edit only the phone number, skip this step.  
,
, or  
Press  
. The following screen appears.  
The cursor flashes indicating that the display is ready  
for the number to be edited.  
M E M O RY D I A LI N G [ 29 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
8
Use the number keypad,  
or  
to edit the phone number.  
The phone number cannot exceed 20 digits. (See page 24.)  
If you don´t want to change the phone number, skip this step.  
Press  
. The handset beeps and displays the confirmation screen.  
The memory storage is complete.  
To edit the numbers that  
you have stored in the  
base, simply overwrite the  
existing number.  
For example, if you store a name and number into  
memory location number 01, the display shows  
“ Memory01 Stored“. After about 2 seconds,  
“ Memory Store“ is displayed.  
9
Press  
to return to standby mode.  
Erasing a Stored Name and Phone Number  
1
2
3
Press and hold  
in standby mode until  
“ Memory Store“ is displayed.  
Press  
and  
or enter a two-digit number (01 - 20)  
to select the memory location you would like to erase.  
Press  
.
The following screen appears with the memory location  
number that you have selected in the display.  
4
Press  
to move the pointer down to “Delete  
Memory“ command line.  
[ 30 ] M E M O RY D I A LI N G  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Press  
screen appears.  
. The following confirmation  
6
7
Press  
to move the pointer to “Yes“ .  
Press  
or  
.
You will hear a confirmation tone and the entry is  
deleted. The following screen appears.  
8
After a few seconds the display returns to the  
“ Memory Store“ screen.  
You may select another number to delete (return to  
step 2) or press  
to return to standby.  
M E M O RY D I A LI N G [ 31 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-way Conferencing  
The Uniden EXT 1365 permits 3-way conversations between  
the handset, base and outside line.  
• Pressing the  
When speaking on the handset  
key on the base while  
dialing with the handset  
will set the 3-way  
conversation mode, and  
dialing is not affected.  
1
2
Press  
on the base  
to join the 3-way conversation.  
• During a 3-way  
conversation, you can  
only dial from the  
handset.  
To hang up, press  
the base. The handset will still  
be connected to the call.  
on  
• Pressing the  
key  
on the handset while  
dialing with the base  
will not set the 3-way  
conversation mode, and  
you hear the busy tone.  
When speaking on the base  
1
2
Press  
on the handset to join the  
3-way conversation.  
To hang up, return the handset to the  
base, or press  
on the handset.  
The base will still be connected to  
the call.  
[ 32 ] TE LE P HO N E FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intercom Feature  
Intercom from the base to handset  
1
2
3
Press  
on the base. The handset and base beep. “Paging“  
again to disconnect.)  
appears on the display. (If no answer, press  
If the page is not answered  
within one minute, the  
paging sounds stops  
automatically.  
Press  
on the display.  
or  
on the handset to answer. “Intercom“ appears  
To turn off the intercom, press  
on the handset or  
on the base.  
Intercom from the handset to base  
1
Press  
on the handset. The handset and base beep.  
“ Paging Base“ appears on the handset display. (If no answer, press  
again to disconnect.)  
2
3
At the base, press  
or  
to answer. “Intercom“ appears on  
the display. Speak into the base microphone.  
To turn off the intercom, press  
on the handset or  
on the base.  
TE LE P HO N E FE ATU R E S [ 33 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Transfer Feature  
To Transfer from the Handset to the Base  
1
Press  
on the handset. The caller is put on hold and the  
intercom tone sounds on the handset and the base.  
“ Hold Paging Base“ appears on the display.  
2
3
Press  
or  
on the base. “Hold Intercom“ appears on  
the display. The intercom mode is activated, but the caller is still on hold.  
To transfer the call to the base, press  
transfer, press on the base.  
on the handset. To cancel the  
To Transfer from the Base to the Handset  
1
2
3
Press  
on the base. The caller is put on hold and the intercom  
tone sounds on the handset and the base. “Hold Paging“ appears on  
the display.  
Press  
or  
on the handset. “Hold Intercom“ appears  
on the display. The intercom mode is activated, but the caller is still on  
hold.  
To transfer the call to the handset, press  
the transfer, press on the handset.  
on the base. To cancel  
[ 34 ] TE LE P HO N E FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chain Dialing  
The memory locations on the handset and base are not limited to phone  
numbers, you may want to store in memory a group of numbers (up to 16  
digits) that you need to enter once your call connects. This is referred to as  
Chain Dialing.  
Selecting a Different Channel  
If you encounter interference while using your phone, you can manually  
change the phone´s channel for clear operation. Interference can come from  
appliances or other phone in your home (see troubleshooting on page 52).  
Tone Dialing Switch-over  
Some telephone companies use equipment that require pulse dialing  
(sometimes referred to as rotary dialing). If you need to enter tone dialing  
digits, you can switch-over to tone dialing during the call. An example of this  
could be entering your bank account number after you have called your bank.  
The digits of your bank account can be entered using DTMF tones.  
Initially make your call with the pulse dialing mode. Once your call connects,  
press  
. Enter the desired number (like in the example above, the bank  
account number). These digits will be sent as tone dialing. This special  
number can be stored in a memory location. This is referred to as Chain  
Dialing. Once the call ends, the tone mode is canceled and pulse dialing  
resumes.  
TE LE P HO N E FE ATU R E S [ 35 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID  
You must subscribe to Caller ID service to use this feature.  
When the telephone rings, the Caller ID feature allows you to view the  
caller´s name and phone number on the display before you answer the phone.  
The handset displays the phone number of the incoming call and the name.  
Additionally, you can dial the displayed number and store the information for  
memory dialing. Make sure you have turned on the Caller ID/Call Waiting  
feature (See page 12).  
• If you answer a call  
before the Caller ID  
message is received  
(Example: before the  
second ring), the  
Caller ID message will  
not appear.  
When the Telephone Rings  
1
When the Caller ID message is received, the display shows the caller´s  
phone number. The incoming call information is stored in the Caller ID  
record.  
• When the call is received  
via a telephone  
company that does not  
offer Caller ID service,  
the caller´s phone  
number and name do  
not appear. (This  
If the Caller ID service includes the caller´s name, the caller´s name  
appears on the display (up to 15 letters).  
includes international  
calls.)  
Here are some typical displays:  
• When the call is via a  
private branch exchange  
(PBX), the caller´s  
When the phone number and  
name data are received  
When invalid data is received  
When the ringer is off  
phone number and  
name may not appear.  
[ 36 ] C A LLE R I D FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When a private name is received  
When an unknown name is received  
When a private number is received  
When an unknown number is received  
• In Caller ID operation, if  
no key is pressed for  
more than 20 seconds,  
an error tone sounds  
and the telephone  
returns to the standby  
mode.  
2
When you pick up the phone, the display changes to “Talk“ .  
• If a call comes in via a  
telephone system that  
does not offer Caller ID  
service, no information  
is stored.  
Data errors appear as “ “ .  
2
Viewing the Caller ID Message List  
• Each message can be up  
to 15 characters for the  
phone number and the  
name.  
The Caller ID list stores information for up to 50 incoming calls - even  
unanswered calls.  
1
Press  
. The summary screen appears. The screen  
shows the number of new messages and total messages.  
2
Press  
to display the latest Caller ID message.  
3
4
Press  
Press  
to see the next message. Or press  
to return to standby.  
to see previous message.  
C A LLE R I D FE ATU R E S [ 37 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting Information from the Caller ID List  
The EXT 1365 stores up to 50 messages. If the phone receives the 51st  
message, the oldest one in the list is automatically deleted. Caller ID data  
can also be deleted manually.  
If you get an incoming call  
or page, the deleting  
operation is canceled and  
the telephone returns to  
standby so you can answer  
the call or page.  
Deleting a Caller ID message  
1
Press  
. Display the message to be deleted from  
or  
the Caller ID list by pressing  
.
2
Press  
.
3
4
Press  
Press  
or  
to select “Yes“ or “No“ .  
or  
.
When the pointer is at “  
“ :  
Yes  
A tone sounds and the Caller ID message is deleted. The next  
Caller ID message is then displayed.  
When the pointer is at “ “ :  
No  
The display returns to the Caller ID message.  
[ 38 ] C A LLE R I D FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting all Caller ID names/numbers  
1
Press  
.
While using the “Delete  
All?“ screen if no key is  
pressed within 20 seconds,  
an error tone sounds and  
the telephone returns to  
standby.  
2
Press  
.
3
4
Press  
Press  
or  
to select “Yes“ or “No“ .  
or  
.
When the pointer is at “  
“ :  
Yes  
A tone sounds and all stored Caller ID messages  
are deleted.  
When the pointer is at “ “ :  
No  
The display returns to the summary screen.  
C A LLE R I D FE ATU R E S [ 39 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Caller ID List  
Calling a party from the Caller ID list  
You can place a call from the Caller ID list. The EXT 1365 stores up to  
50 messages.  
•You cannot make a call  
from the Caller ID list if  
your EXT 1365 is  
connected to a private  
branch exchange (PBX).  
1
2
Press  
. Select the phone number that you want  
or  
to dial by pressing  
.
Press  
dials automatically.  
. The displayed phone number  
• When a long distance  
call has been set, “1“  
appears in the display.  
Long Distance calls and Area Code setting/cancellation  
Pressing  
while the incoming call information is displayed (in step 1) will  
place the prefix “1“ in the display to set up for a long distance call.  
Pressing  
will set or cancel an area code setting.  
Dial edit  
You can temporarily edit the Caller ID number that is displayed by pressing  
. A cursor appears in the display. Press  
cursor left, make your changes and then press  
number in the Caller ID list menu.  
to move the  
. This will not change the  
[ 40 ] C A LLE R I D FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing Caller ID messages in Memory dialing  
Messages shown in the Caller ID list can be stored in memory dialing.  
Using the incoming call information (i.e., Caller ID list), the phone number  
of the party on the Caller ID list can be stored in memory dialing.  
• You can not store  
a Caller ID message if no  
phone number appears  
in the message.  
1
Press  
Select the phone number to be stored from the  
Caller ID list by pressing or  
.
• If there is an incoming  
call or page, memory  
storage is canceled and  
the telephone is set to  
receive the incoming  
call or page.  
.
2
3
4
Press  
.
Press  
and  
or enter a two-digit number (01 - 20)  
to select the memory location to be stored.  
Press  
.
A tone will sound. The number is stored in memory,  
and the display returns to the Caller ID list.  
If a message has already been stored in the selected  
memory number location, a confirmation screen is  
displayed. Press  
to select “Yes“. Press  
to overwrite. The display returns to the Caller ID list.  
C A LLE R I D FE ATU R E S [ 41 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using “Caller ID on Call Waiting” Service  
“Caller ID“ and “Call Waiting“ are separate services. CIDCW (Caller ID on  
Call Waiting) performs the same as regular Caller ID on a Call Waiting number.  
You must subscribe to the “Caller ID on Call Waiting (CIDCW) services“ before  
you can use the following features. The “Call Waiting“ service can also be  
used independently. Please contact your local telephone company for ddetails.  
1
2
3
When a new incoming call arrives during your current  
telephone call, the phone number and the name of the  
caller are displayed.  
Press  
.
You will be able to talk with the second caller. The first  
caller will be put on hold.  
To return to the first caller, press  
again.  
When CIDCW is set to “Opt“ in the Caller ID setup menu (See page 12),  
you can press the key after receiving a call waiting call and view  
a list of ways to handle the new call. Choose an option using the and  
keys and press to activate.  
[ 42 ] C A LLE R I D FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Waiting Features  
Your EXT 1365 gives you new options for Call Waiting. At the touch of a button,  
you can ask the caller to hold, send them to your voice mail service, or  
conference them into your current call. You may be required to subscribe to  
Call Waiting and Call Waiting options to use these features. Not all features are  
available in all areas. Check with your local telephone company for details.  
1
2
When you receive a Call Waiting call, press  
for a list of options.  
Press the  
or  
key to select an option.  
3
Press  
.
A confirmation screen will appear.  
Your EXT 1365 is pre-programmed with seven Call Waiting options. You may  
select to ask the calling party to hold, send them a busy message, forward  
them to your voice mail, or conference them into the current call. You may  
also select to answer and drop the first caller or, at any time, choose to  
drop the first or drop the last caller.  
Check with your local telephone company for a full list of options.  
You can also answer a Call Waiting call immediately by pressing the  
The first caller will be placed on hold. To return to the original caller, press  
again.  
key.  
C A LLE R I D FE ATU R E S [ 43 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessing Calling Features  
To access the network calling features programmed into your phone, follow  
the instructions below. General descriptions of each service are given in the  
following section. For complete instructions for using each service, please  
contact your local telephone company.  
• You must select a  
service from the menu  
before pressing  
.
1
2
Press  
. The following  
screen appears.  
• When using certain  
calling features, local  
toll or long distance  
charges may apply.  
Use the or  
key or enter  
a two-digit number (01-12) to  
select the feature you would  
like to use.  
• Certain calling features  
may not be used on  
some long distance calls  
or from certain types of  
business lines.  
3
Press  
. Talk and the  
volume setting appears for a  
few moments. The display  
shows the activation code  
being dialed.  
[ 44 ] A D VA N C E D C A LLI N G FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pre-programmed Calling Features  
The following calling features and activation codes are pre-programmed in the  
EXT 1365. Activation codes may vary depending on the local telephone  
company. See the page to reprogram a different code of any of these features.  
Preprogrammed  
activation codes  
No. Calling features  
Display  
01 Last Call Return  
02 Busy Call Return  
03 Cancel Call Waiting  
04 Call Forwarding  
05 Cancel Call Forwarding  
06 Priority Calling  
07 Anonymous Call Rejection On ACR On  
08 Anonymous Call Rejection Off ACR Off  
09 Call Blocking  
10 Select Blocking  
Call Return  
✱69  
✱66  
✱70  
Busy Redial  
Cncl Call Wtg  
Call Forward  
Cncl Call Fwd  
Priority Call  
#
#
72  
73  
✱61  
✱77  
✱87  
✱60  
✱67  
Call Block  
Select Block  
Displaying the pre-programmed activation codes  
Use the  
and  
keys to switch between the calling feature and its  
activation code.  
Calling features  
Activation codes  
A D VA N C E D C A LLI N G FE ATU R E S [ 45 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Descriptions of calling features  
The following descriptions are typical and may vary depending on local  
calling area and service availability. For complete instructions, please contact  
your telephone company.  
Last Call Return  
remembers the number of the person who called you last and  
automatically dials that number. This feature is useful if you just missed an  
incoming call.  
Busy Call Return  
continually redials a busy number for you. When a number is busy,  
Busy Redial monitors the busy number and lets you know when the line is free.  
Cancel Call Waiting  
temporarily cancels call waiting service. This feature is useful  
if you have call waiting service, but don´ t want to be disturbed during a call.  
Call Forwarding  
allows you to send your calls to another phone, cellular or  
even pager number.  
Cancel Call Forwarding  
temporarily cancels call forwarding.  
Priority Calling  
lets you recognize special calls before you answer the phone.  
You can set up a list of up to 12 special phone numbers and the instant your  
phone rings, you´ll know if the call is from one of these numbers by the  
distinctive ring. Your list can identify important callers or people you don´t  
wish to talk to.  
Anonymous Call Rejection  
stops calls from people who block their Caller ID  
information. Anonymous callers hear a message that you are not accepting  
blocked calls and how to unlock their calls. On your end of the line, the  
phone doesn´t ring.  
Call Blocking  
allows you to stop the specified calls before you answer the  
phone.  
Select Blocking  
stops your name and telephone number, one call at a time,  
from being sent to Caller ID customers.  
[ 46 ] A D VA N C E D C A LLI N G FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding New Features  
The last two calling feature locations are available for you to program new  
features into your EXT 1365. You may also reprogram features in any of the  
other locations or restore the pre-programmed service at any time.  
Add or edit a service  
1
2
Press and hold  
.
The following screen appears.  
Use the  
and  
keys or  
number keys to select the  
feature location you would like  
to edit.  
3
Press  
.
The following screen appears  
with the service location  
number that you have selected  
in the display.  
You can restore a feature to its original pre-programmed service. Just select  
“ Restore Svc01“ and follow the instructions below.  
If you have selected “Restore Svc01“, the  
following display appears:  
Select “Yes“ to restore Call Return. The following  
display appears. The phone returns to step 1.  
A D VA N C E D C A LLI N G FE ATU R E S [ 47 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Press  
to edit the feature stored in location  
two. The following screen appears:  
The cursor flashes indicating that the name can be  
edited. Use the  
a new name.  
,
, and number keys to enter  
Press the  
Press and hold  
at once.  
key to delete a character.  
to delete all characters  
5
Press  
when you have entered a new name.  
The following screen appears:  
The cursor flashes indicating that the code can be  
edited or entered. Use the keypad to enter a new code.  
If you enter a wrong digit, press the  
.
To delete wrong digits all together, press and hold  
.
6
7
Press  
. The following screen appears:  
Press  
to standby mode.  
or return the handset to the base to return  
[ 48 ] A D VA N C E D C A LLI N G FE ATU R E S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the Digital Security Code  
The digital security code is an identification code used to connect the  
handset and the base unit. Normally, setting the code is not necessary.  
The first time you charge your handset, the security code is automatically set.  
(See page 6.)  
In the rare situation that you suspect another cordless telephone is using the  
same security code, you can change the code.  
If the handset battery pack  
is completely discharged or  
the battery pack is  
removed, the digital  
security code will be lost.  
If this happens, a new  
security code is set  
automatically next time the  
battery pack is charged.  
1
2
Remove the handset from the base unit.  
Press and hold on the base.  
While the handset is emitting the paging  
sound, replace the handset to the base unit.  
The paging tone stops.  
Leave the handset on the base for more than  
3 seconds. A random, new security code is set.  
A D D I TI O N A L I N FO R M ATI O N [ 49 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Beltclip  
To attach the beltclip  
To remove the beltclip  
Insert the beltclip into the holes on  
each side of the handset. Press down  
until it clicks.  
Pull both sides of the beltclip to  
release the tabs from the holes.  
Headset Installation  
Your phone may be used with an optional headset, the Uniden  
HS910. To use this feature, insert the headset plug into the  
headset jack. Your phone is ready for hands-free  
conversations. (Headsets may be purchased by calling the  
Uniden Parts Department or visiting the website. See Page 7.)  
[ 50 ] A D D I TI O N A L I N FO R M ATI O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note on Power Sources  
Battery replacement and handling  
RECYCLING NICKEL-CADMIUM BATTERIES  
When the operating time becomes short, even after a battery  
is recharged, please replace the battery.  
With normal usage, your battery should last about one year.  
Please contact your place of purchase or the Uniden Parts  
Department for a replacement battery. (See page 7)  
Nickel-cadmium cells are used in the battery  
pack. Please take your used nickel-cadmium  
battery packs to a store that recycles nickel-  
cadmium batteries.  
Power Failure  
During the period that the power is off, you will not  
be able to make or receive calls with the telephone.  
Caution  
• Use the specified battery pack.  
• Do not remove the battery from the handset to charge it.  
• Never throw the battery into a fire, disassemble it, or heat it.  
• Do not remove or damage the battery casing.  
Maintenance  
When slightly dirty  
Wipe with a soft, dry cloth.  
Caution  
When very dirty  
Wipe with a soft cloth that has been dampened with  
diluted, neutral detergent. Dry with a dry cloth.  
Do not use paint thinner, benzene,  
alcohol, or other chemical products.  
Doing so may discolor the surface of  
the telephone and damage the finish.  
When the charging terminals become dirty  
Wipe with a dry cloth or a pencil eraser, if necessary.  
A D D I TI O N A L I N FO R M ATI O N [ 51 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If your phone is not performing to your expectations, please try these simple steps first.  
Symptom  
Suggestion  
status  
The  
LED won´t light  
• Make sure the AC adapter is plugged into the base unit  
and wall outlet.  
• Make sure the handset is properly seated in the base unit.  
• Make sure the charging contacts on the handset and  
base unit are clean.  
when the handset is placed  
in the base unit.  
The audio sounds weak  
and/or scratchy.  
• Press  
background noise.  
during a call to help eliminate  
• Make sure that the base unit antenna is in a vertical position.  
• Move the handset and or base unit to a different location  
away from metal objects or appliances and try again.  
• Make sure that you are not too far from the base.  
Can´t make or receive calls.  
• Check both ends of the base unit telephone line cord.  
• Make sure the AC adapter is plugged into the base unit  
and wall outlet.  
• Disconnect the AC adapter for a few minutes,  
then reconnect it.  
• Reset the digital security code (See page 49).  
• Make sure  
is pressed.  
[ 52 ] A D D I TI O N A L I N FO R M ATI O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Suggestion  
The handset doesn´t ring  
or receive a page.  
• The battery pack may be weak. Charge the battery on the  
base unit for more than 15-20 hours.  
• The handset may be too far away from the base unit.  
• Place the base unit away from appliances or metal objects.  
• Reset the digital security code (See page 49).  
Severe noise interference.  
• Keep the handset away from microwave ovens, computers,  
remote control toys, wireless microphones, alarm systems,  
intercoms, room monitors, fluorescent lights, and  
electrical appliances.  
• Move to another location or turn off the source  
of interference.  
The Caller ID/CIDCW does  
not display.  
• The handset was picked up before the second ring.  
• The call was placed through a switch board.  
• Call your local telephone company to verify your Caller ID  
service is current.  
• Make sure that the CIDCW option is set to “ On“ or “ Opt“ .  
If you still have a problem.  
• Call our customer hotline at 1-800-297-1023.  
A D D I TI O N A L I N FO R M ATI O N [ 53 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
The EXT 1365 complies with FCC Parts 15 and 68.  
Operating Temperature:  
0ºC to +50ºC (+32ºF to +122ºF)  
AC Adapter Information  
AC Adapter part number:  
Input Voltage:  
Output Voltage:  
AD-312  
120V AC 60Hz  
9V DC 350 mA  
Battery Information  
Battery part number:  
Capacity:  
BT-800  
800 mAH, 3.6V  
Battery Use Time (per charge)  
From fully charged:  
Talk Mode duration  
Standby Mode duration  
6 hours  
10 days  
If the handset is left off of the base, the actual Talk Mode duration will be reduced  
respective to the amount of time the handset is off the base.  
Recharge your phone on a regular basis about once a week by placing the handset on the base for 15-20  
hours. When the operating time becomes short, even after the battery is recharged, please replace the  
battery. With normal usage, the battery should last about one year.  
Replacement batteries may be purchased at your local Uniden dealer or by contacting the Uniden Parts  
Department (800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.  
We can also be reached on the web at www.uniden.com  
Specifications, features, and availability of optional accessories are all subject to change without  
prior notice.  
[ 54 ] A D D I TI O N A L I N FO R M ATI O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Use only the appropriate type and size battery pack specified in  
the owner´s manual.  
2. Do not dispose of the battery pack in a fire. The cell may explode.  
Check the nickel-cadmium battery disposal package insert for  
disposal instructions.  
3. Do not open or mutilate the battery pack. Released electrolyte is  
corrosive and may cause damage to the eyes or skin. It may be  
toxic if swallowed.  
4. Exercise care in handling the battery in order not to short the  
battery with conducting materials such as rings, bracelets, and  
keys. The battery or conductor may overheat and cause burns.  
5. Charge the battery pack provided with or identified for use with  
this product only in accordance with the instructions and  
limitations specified in the owner´s manual provided for this  
product.  
Precautions!  
Important Safety Instructions  
Before you read anything else, please observe the following:  
When using your telephone equipment, these basic safety precautions  
should always be followed to reduce the risk of fire, electrical shock,  
and injury to persons:  
Warning!  
Uniden America Corporation DOES NOT represent this unit to be  
waterproof. To reduce the risk of fire, electrical shock, or damage to  
the unit, DO NOT expose this unit to rain or moisture.  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Use a dry  
cloth for cleaning without liquid or aerosol cleaners.  
4. Do not use this product near water; for example, near a bath tub,  
wash bowl, kitchen sink or laundry tub, in a wet basement, or near  
a swimming pool.  
Rechargeable Nickel-Cadmium Battery Warning  
•
•
This equipment contains a rechargeable nickel-cadmium battery.  
Cadmium is a chemical known to the State of California to cause  
cancer.  
The rechargeable nickel-cadmium battery contained in this  
equipment may explode if disposed of in a fire.  
Do not short-circuit the battery.  
Do not charge the rechargeable nickel-cadmium battery used in  
this equipment in any charger other than the one designed to  
charge this battery as specified in the owner´s manual. Using  
another charger may damage the battery or cause the battery to  
explode.  
5. Do not place this product on an unstable cart, stand, or table. The  
telephone may fall, causing serious damage to the unit.  
6. Slots and openings in the cabinet and the back or bottom are  
provided for ventilation. To protect the product from overheating,  
these openings must not be blocked or covered. This product  
should never be placed near or over a radiator or heat register.  
This product should not be placed in a built-in installation unless  
proper ventilation is provided.  
7. This product should be operated only from the type of power  
source indicated on the marking label. If you are not sure of the  
type of power supply to your home, consult your dealer or local  
power company.  
8. Do not allow anything to rest on the power cord. Do not locate this  
product where the cord will be damaged by persons walking on it.  
9. Do not overload wall outlets and extension cords, as this can result  
in the risk of fire or electrical shock.  
10.Never push objects of any kind into this product through cabinet  
slots, as they may touch dangerous voltage points or short out  
parts that could result in a risk of fire or electric shock. Never spill  
liquid of any kind on the product.  
11.To reduce the risk of electric shock, do not disassemble this  
product. Take it to qualified service personnel when service or  
repair work is required. Opening or removing covers may expose  
you to dangerous voltages or other risks. Incorrect reassembly can  
cause electric shock when the appliance is subsequently used.  
12.Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
A. When the power supply cord is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
D. If the product does not operate normally when following the  
operating instructions. (Adjust only those controls that are  
covered by the operating instructions. Improper adjustment  
of other controls may result in damage and will often require  
extensive repair work by a qualified technician.)  
•
•
•
6. Observe proper polarity orientation between the battery pack and  
battery charger.  
SAVE THESE INSTRUCTIONS!  
Important Electrical Considerations  
Unplug all electrical appliances when you know an electrical storm is  
approaching. Lightning can pass through your household wiring and  
damage any device connected to it. This phone is no exception.  
Rechargeable Nickel-Cadmium BBatteries  
Must Be Recycled or DDisposed of Properly  
Warning!  
Please do not attempt to unplug any appliance during an electrical  
storm.  
•
Uniden voluntarily participates in an RBRC¤ industry program to  
collect and recycle nickel-cadmium batteries at the end of their  
useful life, when taken out of service within the United States. The  
RBRC¤ program provides a convenient alternative to placing used  
nickel-cadmium batteries into the trash or municipal waste stream,  
which is illegal in some areas.  
Through the RBRC¤ program, Uniden makes it easy for you to drop  
off the used battery at local retailers of replacement nickel-  
cadmium batteries. You may also contact your local recycling  
center for information on where to return the used battery. Please  
call 1-800-8-BATTERY for information on Ni-Cd battery recycling in  
your area. Uniden’s involvement in this program is part of its  
commitment to protecting our environment and conserving  
natural resources.  
The FCC Wants You To Know  
Changes or modifications to this product not expressly approved by  
Uniden, or operation of this product in any way other than as detailed  
by the owner´s manual, could void your authority to operate this  
product. The equipment cannot be used on public coin phone service  
provided by the telephone company. Connection to party line service is  
subject to state tariffs. (Contact the state public utility commission,  
public service commission or corporation commission for information.)  
•
Range  
Your new phone is designed to achieve the maximum possible range by  
transmitting and receiving according to the highest specifications set  
forth by the FCC. We have rated this phone to operate at a maximum  
distance with the qualification that the range depends upon the  
environment in which the telephone is used. Many factors limit range,  
and it would be impossible to include all the variables in our rating.  
The Maximum Range rating of this phone is meant to be used as a  
means of comparison against other range claims.  
•
RBRC¤ is a registered trademark of the Rechargeable Battery  
Recycling Corporation.  
The exclamation point within an equilateral triangle  
is intended to alert the user to the presence of  
important operating and maintenance (servicing)  
instructions in the literature accompanying the  
appliance.  
Telephone Line Problems  
The FCC has granted the telephone company the right to disconnect  
service in the event that your phone causes problems on the  
telephone line. Also, the telephone company may make changes in  
facilities and services which may affect the operation of your unit.  
However, your telephone company must give adequate notice in  
writing prior to such actions to allow you time for making necessary  
arrangements to continue uninterrupted service.  
E. If the product has been dropped or the cabinet has been  
damaged.  
F. If the product exhibits a distinct change in performance.  
13.Do not use the telephone to report a gas leak in the vicinity of the  
leak.  
If you are having trouble with your telephone service, you must first  
disconnect your phone to determine if it is the cause of your  
problem. If you determine that it is the cause, you must leave it  
Additional Battery Safety Precautions  
Caution! To reduce the risk of fire or injury to persons by the  
battery, read and follow these instructions:  
A D D I TI OdNiscoAnneLctedIunNtilFtheOtroRubleMhasAbeTenIcoOrrecNted. [ 55 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Interference  
Telephone LLine Outlets  
One Year Limited Warranty  
Radio interference may occasionally cause buzzing and humming in  
your cordless handset, or clicking noises in the base. This interference  
is caused by external sources such as TV, refrigerator, vacuum cleaner,  
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If  
these noises continue and are too distracting, please check around  
your home to see what appliances may be causing the problem. In  
addition, we recommend that the base not be plugged into a circuit  
that also powers a major appliance because of the potential for  
interference. Be certain that the antenna on the unit is fully extended  
when needed.  
There are two types of phone outlets:  
Important: Evidence of original purchase is required for warranty  
service.  
Modular Jack  
Most phone equipment available now uses modular jacks. Phone cords  
are fitted with a molded plastic connector which plugs into this type  
of jack. If you do not have modular phone jacks, contact your local  
telephone company for information about their installation.  
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden“)  
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the  
original retail owner, this Uniden Product to be free from defects in  
materials and craftsmanship with only the limitations or exclusions set  
out below.  
Hardwired Jack  
Some equipment is wired directly to a phone jack, and these types of  
installations require a modular jack converter. This type of installation  
is not difficult; however, you should contact your Uniden telephone  
dealer or a telephone supply store for advice about the proper adapter  
or converter for your particular situation.  
WARRANTY DURATION: This warranty to the original user shall  
terminate and be of no further effect 12 months after the date of  
original retail sale. The warranty is invalid if the Product is (A)  
damaged or not maintained as reasonable or necessary, (B) modified,  
altered, or used as part of any conversion kits, subassemblies, or any  
configurations not sold by Uniden, (C) improperly installed, (D)  
serviced or repaired by someone other than an authorized Uniden  
service center for a defect or malfunction covered by this warranty, (E)  
used in any conjunction with equipment or parts or as part of any  
system not manufactured by Uniden, or (F) installed or programmed  
by anyone other than as detailed by the owner s manual for this  
product.  
In the unlikely event that you consistently hear other voices or  
distracting transmissions on your phone, you may be receiving radio  
signals from another cordless telephone or other source of  
interference. If you cannot eliminate this type of interference, you  
need to change to a different channel.  
Finally, it should be noted that some cordless telephones operate at  
frequencies that may cause interference to nearby TVs and VCRs. To  
minimize or prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV or VCR. If  
interference is experienced, moving the cordless telephone farther  
away from the TV or VCR will often reduce or eliminate the  
interference.  
Connecting the Telephone Cords  
Consider these safety guidelines before connecting the telephone  
cords:  
Caution!  
•
•
Never install telephone wiring during a lightning storm.  
Never touch uninsulated telephone wires or terminals unless the  
telephone line has been disconnected.  
•
Use caution when installing or modifying telephone lines.  
STATEMENT OF REMEDY: In the event that the product does not  
conform to this warranty at any time while this warranty is in effect,  
warrantor will either, at its option, repair or replace the defective unit  
and return it to you without charge for parts, service, or any other  
cost (except shipping and handling) incurred by warrantor or its  
representatives in connection with the performance of this warranty.  
Warrantor, at its option, may replace the unit with a new or  
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE  
SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN  
LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE  
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION  
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS  
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR  
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do  
not allow this exclusion or limitation of incidental or consequential  
damages so the above limitation or exclusion may not apply to you.  
More Than One Cordless Telephone  
Applying Power to the Base  
If you want to use more than one cordless telephone in your home,  
they must operate on different channels. Press the channel key to  
select a channel that provides the clearest communication.  
This phone requires an AC outlet, without a switch to interrupt power,  
and the included AC adapter. To relieve strain on the DC plug when the  
phone is placed on a desk or table, wrap the power cord around the  
strain relief notch on the bottom of the base.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications between the  
handset and base of your cordless telephone are accomplished by  
means of radio waves which are broadcast over the open airways.  
Because of the inherent physical properties of radio waves, your  
communications can be received by radio receiving devices other than  
your own cordless telephone unit. Consequently, any communications  
using your cordless telephone may not be private.  
NOTE:  
Place the power cord so that it does not create a trip  
hazard, or where it could become chafed and create a  
fire or other electrical hazards.  
Adapter Safety Features  
If the AC adapter furnished with this phone has  
a polarized line plug (a plug having one blade  
wider than the other), this plug will fit into the  
power outlet only one way. If you are unable to  
insert the plug fully into the outlet, try  
reversing the plug.  
Installation Considerations  
Selecting a Location  
LEGAL REMEDIES: This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to state. This  
warranty is void outside the United States of America.  
Before choosing a location for your new phone, there are some  
important guidelines you should consider:  
Do not alter the shape of the blades of the  
polarized plug!  
•
The location should be close to both a phone jack and continuous  
power outlet. (A continuous power outlet is an AC outlet which  
does not have a switch to interrupt its power.)  
Keep the base and handset away from sources of electrical noise  
such as motors or fluorescent lighting.  
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after  
following the instructions in the owner´s manual you are certain that  
the Product is defective, pack the Product carefully (preferably in its  
original packaging). The Product should include all parts and  
accessories originally packaged with the Product. Include evidence of  
original purchase and a note describing the defect that has caused you  
to return it. The Product should be shipped freight prepaid, by  
traceable means, to warrantor at:  
NOTE:  
If you cannot plug the AC adapter into the outlet,  
contact someone about replacing the outlet.  
•
Plug the AC Adapter into a standard 120 VAC wall outlet.  
•
•
Be sure there is sufficient space to fully extend the base antenna.  
The base can be placed on a desk or tabletop or mounted on a  
standard telephone wall plate.  
You should charge your new phone for 15-20 hours before  
completing the installation or using the handset.  
Do not use an outlet controlled by a wall switch.  
•
Uniden America Corporation  
Parts and Service Division  
4700 Amon Carter Blvd.  
Fort Worth, TX 76155  
Use only the Uniden AC Adapter supplied with this phone.  
(800) 297-1023, 7 a.m. to 7 p.m. Central, Monday through Friday  
[ 56 ] A D D I TI O N A L I N FO R M ATI O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Information  
The FCC wants you to know!  
Telephone Line Problems  
Changes or modifications to this product not expressly  
approved by Uniden, or operation of this product in  
any way other than as detailed by the owner’s manual,  
could void your authority to operate this product. The  
equipment cannot be used on public coin phone  
service provided by the telephone company.  
Connection to party line service is subject to state  
tariffs. (Contact the state public utility commission,  
public service commission or corporation commission  
for information.)  
The FCC has granted the telephone company the right  
to disconnect service in the event that your phone  
causes problems on the telephone line. Also, the  
telephone company may make changes in facilities and  
services which may affect the operation of your unit.  
However, your telephone company must give adequate  
notice in writing prior to such actions to allow you  
time for making necessary arrangements to continue  
uninterrupted service.  
If you are having trouble with your telephone service,  
you must first disconnect your phone to determine if it  
is the cause of your problem. If you determine that it  
is the cause, you must leave it disconnected until the  
trouble has been corrected.  
Below is some information that might concern you  
while using your new phone.  
Range  
Your new phone is designed to achieve the maximum  
possible range by transmitting and receiving according  
to the highest specifications set forth by the FCC. We  
have rated this phone to operate at a maximum  
distance with the qualification that the range depends  
upon the environment in which the telephone is used.  
Many factors limit range, and it would be impossible to  
include all the variables in our rating. The Maximum  
Range rating of this phone is meant to be used as a  
means of comparison against other range claims.  
Radio Interference  
Radio interference may occasionally cause buzzing and  
humming in your cordless handset, or clicking noises  
in the base. This interference is caused by external  
sources such as TV, refrigerator, vacuum cleaner,  
fluorescent lighting, or electrical storm. Your unit is  
NOT DEFECTIVE. If these noises continue and are too  
distracting, please check around your home to see  
what appliances may be causing the problem.  
A D D I TI O N A L I N FO R M ATI O N [ 57 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In addition, we recommend that the base not be  
plugged into a circuit that also powers a major  
appliance because of the potential for interference. Be  
certain that the antenna on the unit is fully extended  
when needed.  
More Than One Cordless Telephone  
If you want to use more than one cordless telephone  
in your home, they must operate on different  
channels. Press the channel key to select a channel  
that provides the clearest communication.  
In the unlikely event that you consistently hear other  
voices or distracting transmissions on your phone, you  
may be receiving radio signals from another cordless  
telephone or other source of interference. If you  
cannot eliminate this type of interference, you need to  
change to a different channel.  
Cordless Telephone Privacy  
Cordless telephones are radio devices. Communications  
between the handset and base of your cordless  
telephone are accomplished by means of radio waves  
which are broadcasted over the open airways. Because  
of the inherent physical properties of radio waves,  
your communications can be received by radio  
receiving devices other than your own cordless  
telephone unit. Consequently, any communications  
using your cordless telephone may not be private.  
Finally, it should be noted that some cordless  
telephones operate at frequencies that may cause  
interference to nearby TVs and VCRs. To minimize or  
prevent such interference, the base of the cordless  
telephone should not be placed near or on top of a TV  
or VCR. If interference is experienced, moving the  
cordless telephone farther away from the TV or VCR  
will often reduce or eliminate the interference.  
[ 58 ] A D D I TI O N A L I N FO R M ATI O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
0 - 9  
Calling Features  
Memory dialing  
Editing a stored name  
and phone number . . . . . . . 29  
Erasing a stored name  
and phone number . . . . . . . .30  
Making calls  
with memory dialing . . . . . . .27  
Storing phone  
numbers and names . . . . . . .23  
3-way conferencing . . . . . . . . .32  
Accessing . . . . . . . . . . . . . .44  
Adding and Editing . . . . . . . .47  
Description . . . . . . . . . . . . .46  
Options . . . . . . . . . . . . . . .43  
Pre-programmed . . . . . . . . .45  
Connection . . . . . . . . . . . . . .11  
A
Adjusting the volume . . . . . . .18  
Area Code . . . . . . . . . . . . . . 13  
Auto Talk . . . . . . . . . . . . . . . 12  
B
D
Base ringer switch . . . . . . . . .18  
Base speaker volume . . . . . . . 18  
Battery pack  
Preparing and charging . . . . .10  
Replacement and handling . . .51  
Dialing mode . . . . . . . . . . . . .11  
Digital security code . . . . . .6, 49  
P, Q  
Package contents . . . . . . . . . . .7  
E, F, G  
Earpiece volume . . . . . . . . . . .18  
R
Receiving a call . . . . . . . . . . .16  
Redialing a call . . . . . . . . . . .19  
Ringer off . . . . . . . . . . . . . . .18  
Ringer volume . . . . . . . . . . . .18  
C
H
Caller ID  
Headset installation . . . . . . . .50  
Advanced Call Waiting Features . . 42  
Caller ID service . . . . . . . . .36  
Calling . . . . . . . . . . . . . . . .40  
Call Waiting . . . . . . . . . . . .42  
Deleting . . . . . . . . . . . . . . .38  
Setting . . . . . . . . . . . . . . . 12  
Storing . . . . . . . . . . . . . . . 41  
Using . . . . . . . . . . . . . . . .40  
Viewing . . . . . . . . . . . . . . .37  
I, J, K  
Installing the beltclip . . . . . . .50  
Intercom . . . . . . . . . . . . . . . 33  
S
Setting up the Base unit . . . . . .8  
Setting up the Handset . . . . . . .9  
L
Language . . . . . . . . . . . . . . .12  
T, U, V, W, X, Y, Z  
Technical Information . . . . .3, 57  
Transferring a call . . . . . . . . . 34  
Troubleshooting . . . . . . . . . . .52  
Voice Mail . . . . . . . . . . . . . . .21  
M, N, O  
Maintenance . . . . . . . . . . . . .51  
Making a call . . . . . . . . . . . . .14  
[ 59 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
[ 60 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At Uniden, we´ll take care of you!  
If you need any assistance with this product, please call our Customer Hotline at  
1-800-297-1023  
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.  
Our Uniden representatives will be happy to help you with any matters regarding  
the operation of this unit, available accessories, or any other related matters.  
Thank you for purchasing a Uniden product.  
Hours: M-F 7:00 AM to 7:00 PM CST.  
[ 61 ]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T H A N K Y O U F O R P U R C H A S I N G A U N I D E N C O R D L E S S P H O N E  
Covered under one or more of the following U.S. patents:  
4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690  
5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269  
5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345  
5,787,356 5,838,721 5,864,619 5,893,034 5,912,968 5,915,227  
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082  
6,125,277  
© 2001 Uniden America Corporation, Fort Worth, TX  
All rights reserved.  
Printed in China  
UCZZ01734BZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teledyne TV Converter Box T200U NOy User Manual
Toshiba Computer Drive GMAA0020901T User Manual
Toshiba Security Camera IK DF02ADAY User Manual
Triarch Indoor Furnishings 31086 32 User Manual
Tricity Bendix Oven TBS 603 User Manual
Universal Remote Control Universal Remote UR2 CBL CV04 User Manual
ViewSonic Computer Monitor VS15423 User Manual
ViewSonic Projector VG920 User Manual
Vizio Car Speaker SB3821 C6 User Manual
VTech Cell Phone 91 002463 000 000 User Manual