UNIDEN
CORDLESS
TELEPHONES
DXI4560 and DXI4561
Series
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product.
If you have any questions or problems,
please do not return this product to the place of purchase.
Our customer care specialists are here to help you!
Customer Hotline at 1-800-297-1023 during regular
Having Trouble?
business hours.*
To order replacement batteries or other accessories,
1-800-554-3988 during regular business hours.*
Need a Part?
Uniden provides a customer service hotline for
accessibility questions. If you have disability and
need customer service assistance or if you have
any questions about how Uniden's products can
accommodate persons with disabilities, please call
the accessibility voice/TTY line:
Help for our
Special Needs
Customers
1-800-874-9314 (voice or TTY).
Accessibility information can be found on our
link. If your call is received outside of our business
hours, leave us a message and we will call you back.
* Central Standard Time. Detailed customer service hours are available at
©2007 Uniden America Corporation, Fort Worth, Texas.
Contains additional foreign articles.
Printed in China
UPZZ0ꢀ097FZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Base
in use/ (in use/charge) LED /
Voice mail waiting indicator (flashing)
DC IN 9V jack TEL LINE jack
[find]
Charging contacts
Parts of the Charger
DC IN 9V
jack
Charging
contacts
(charge)
LED
3) Installing the Phone
Choosing the Best Location
Before choosing a location for your new phone, here are some important
guidelines you should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid noise sources such as a
window by a street with heavy traffic
Avoid television sets and
other electronic equipment
Avoid microwave ovens
Avoid excessive
moisture, extremely
low temperatures, dust,
mechanical vibration,
or shock
Choose a
central location
Avoid
personal computers
Avoid other
cordless telephones
• Choose a location close to both a phone jack and a continuous power
outlet (one which is not connected to a switch).
• Keep the base and handsets away from sources of electrical noise such as
motors, microwave ovens, and fluorescent lighting.
• For better reception, place the base as high as possible. You can place the
base on a desk or table top or mount it on the wall.
• Place the base in an open area for optimum range and reception.
• If your home has specially wired alarm equipment connected to the
telephone line, be sure that installing the system does not disable your
alarm equipment. If you have questions about what will disable your alarm
equipment, contact your telephone company or a qualified installer.
Installing the Battery
Note: Use only the Uniden BT-1006 rechargeable battery pack
supplied with your phone.
Remove the cover.
Press down
Connect the battery pack
with the correct polarity.
1
2
Use the finger
indention for
a better grip
Red Black
Wire Wire
Red
Black
Slide the cover
downward
The connector notches
fit only one way.
Replace the cover.
3
Click
Listen for
a click to
ensure
connection.
Slide upwards
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Base and Charger
Note: Use only the supplied AD-0001 AC adapter for the base and
AD-310 or AD-1010 for the charger. Do not use any other AC adapter.
Connect each AC adapter to the DC IN 9V jack and
to a standard 120V AC wall outlet.
1
To AC outlet
AC adapter
(supplied)
Route the cord.
To DC IN 9V
To AC outlet
To DC IN 9V
Do not use a power outlet
controlled by a wall switch.
AC adapter (supplied)
2
Make sure that
the in use/ and
LEDs illuminate.
Charge the handsets
at least 15-20 hours.
If the LED does not illuminate,
check to see that the AC
adapter is plugged in and
that the handset makes good
contact with the charging
contacts.
Once the handset
3
battery packs are
fully charged, use
the telephone cord
to connect the
TEL LINE jack to a
telephone wall jack.
Route the cord.
To TEL LINE
To telephone wall jack
Telephone cord (supplied)
Charge both handsets at least
15 to 20 hours before you plug
in the phone cord.
Note:
• Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
• If the telephone cord does not fit into your telephone wall jack,
contact your local phone provider for assistance.
Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
ꢀ) Be sure both handsets are fully charged.
2) One at a time, place each handset in the base. The in use/ LED on the
base begins to flash, indicating the base is registering the handset.
3) Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
4) Press [end] and continue with the next handset.
Note:
• Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
• When you charge the handsets, the
HS1
Caller ID summary screen and the
name of the handset appears.
Total:00
Mounting the Base on a Wall
You can mount the phone on any standard telephone jack wall plate.
ꢀ) Plug the AC adapter to the DC IN 9V jack.
2) Plug the AC adapter into a standard ꢀ20V AC outlet.
4
3) Plug the telephone cord into the TEL LINE jack.
4) Route the telephone cord through the molded
wiring channel as shown.
6
1
5
ꢁ) Plug the telephone cord into the telephone
wall jack.
3
6
ꢂ) Align the mounting slots on the base with
the mounting posts on the wall. Then push in and
down until the phone is firmly seated.
2
Note: To mount the phone directly on the wall, insert two 1 3/8 inch,
#10 screws (not supplied) into the wall using anchors suitable for
1
the wall material. Place the screws 3 15
/
inches apart, and allow /8
16
inch free space between the wall and screw heads.
Download from Www.Somanuals.com. All Manuals Search And Download.
4) Setting Up Your Phone
There are five basic options that you will need to set up: Display Language,
Dial Mode, CIDCW (Caller ID on Call Waiting), Area Code, and AutoTalk.
ｰAuto Talk :Off
CIDCW :On
Area Code :
Dial :Tone
CIDCW and Dial Mode options can only
be changed from Handset ꢀ.
(Handset ꢀ shows HS1 on the screen
while the phone is charging.)
Language :Eng
Scroll
(Handset 1)
AutoTalk, Area Code and Language options
can be changed from any handset.
ｰAuto Talk :Off
Area Code :
Language :Eng
Setting the Language
You can change the language the handset menu displays. Choose from
English (ENG), French (FR), or Spanish (ESP).
ꢀ) With the phone in standby, press and hold [cid/menu].
2) Press [vol/ / ] to move the pointer to select LANGUAGE.
3) Press [select/channel] to select ENG, FR. or ESP.
4) Press [end] to complete the setting. The handset returns to standby.
Changing the Dial Mode (Tone or Pulse Dialing)
(HS1 only)
Your phone can communicate with the telephone network in two different
ways: tone dialing or pulse dialing. These days, most phone networks use a
method called tone dialing, so your phone comes programmed for tone dialing.
If your phone company uses pulse dialing, you need to change your phone's
dial mode. If you don't get a dial tone or can't connect to the telephone
network, follow the steps below to modify your phone’s settings:
ꢀ) With the phone in standby, press and hold [cid/menu].
2) Press [vol/ / ] to move the pointer to select DIAL.
3) Press [select/channel] to set the phone to pulse dialing.
4) Press [end].
ꢁ) Return the handset to the base. The handset communicates the new
setting to the base, and the base activates the setting on any other
handsets.
Note: If your phone system requires pulse dialing and you need
to send DTMF tones during a call, press [ /tone/ ] to temporarily
switch to tone dialing. When the call ends, the phone automatically
returns to pulse dialing mode.
Activating Caller ID on Call Waiting (HS1 only)
Caller ID allows you to see the name and number of the calling party before
you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the
name and number of a call that comes in when you are on the line. You must
subscribe to Caller ID service through your local telephone provider to use
this feature.
ꢀ) With the phone in standby, press and hold [cid/menu].
2) Press [vol/ / ] to move the pointer to select CIDCW.
3) Press [select/channel] to toggle and turn on Caller ID on Call Waiting.
4) Press [end].
ꢁ) Return the handset to the base. The handset communicates the new
setting to the base, and the base activates the setting on any other
handsets.
Programming Your Area Code (Seven-Digit Dialing)
If you can make a local call by dialing only seven digits (instead of ten), you
can program your local area code in your phone. Calls that come from within
your area code will show only the seven-digit phone number; calls from
outside your area code will show all ten digits.
ꢀ) With the phone in standby, press and hold [cid/menu].
2) Press [vol/ / ] to move the pointer to select AREA CODE.
3) Press [select/channel]. If an area code was already stored, the phone
will display it.
4) Use the number keys ([0] – [9]) to enter the three-digit area code.
If you make an error, use [delete/transfer] to backspace.
ꢁ) Press [select/channel]. A confirmation tone sounds.
ꢂ) Press [end] to complete the setting. The handset returns to standby.
Activating AutoTalk
AutoTalk allows you to answer the phone simply by removing the handset
from the cradle. You do not have to press a key to answer the incoming call.
ꢀ) With the phone in standby, press and hold [cid/menu].
2) Press [select/channel] to turn AutoTalk on.
3) Press [end] to complete the setting. The handset returns to standby.
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Using the Speed Dial Memory
You can store up to ten names and numbers in each handset. You can
dial these numbers with just a few key presses.
Note: When editing the speed dial memory, you must press a key
within thirty seconds or the phone will return to standby.
Storing a Name and Number in Memory
ꢀ) With the phone in standby,
Select Memory
01ｰ
02 JOHN DOE
press [memory].
2) Enter [0] - [9] or use [vol/ / ] and
[vol/ / ] to select the speed dial
location where you would like to store.
3) Press [select/channel] twice. STORE
NAME appears and a cursor flashes
indicating that the phone is ready for the
name to be entered.
Store Name
Note: If the selected speed dial
number is already assigned, the Edit
screen appears. You can select EDIT
MEMORY to edit this entry, select
DELETE MEMORY to erase this entry,
or select GO BACK to choose another
speed dial number.
ｰEdit Memory01
Delete Memory01
Go Back
4) Enter a name (up to thirteen characters) using the keypad. If no name
is required, go to step ꢁ.
• Use [ /tone/ ] and [#/ ] to move the cursor to the desired location.
• Press [delete/transfer] to delete characters as needed.
• If you make a mistake, move the cursor to the incorrect character
and erase the wrong character. Then enter the correct character.
• To delete all characters, press and hold [delete/transfer].
• If the next character uses the same number key, press [#/ ] first to
move the cursor over. Otherwise the next time you press the number
key, it changes the character that was previously set.
Refer to the letters on the number keys to select the desired
characters. With each press of a number key, the displayed character
appears in the order shown the following table.
Number of times key is pressed
keys
1
1
A
D
G
J
M
P
T
W
*
2
3
4
5
6
7
8
9
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
-
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
5
6
r
8
s
7
9
y
z
0
(blank)
For example, to enter Movies.
ꢀ. Press [6] once.
Then press [#/ ] to move the cursor to the right.
2. Press [6] six times.
3. Press [8] six times.
4. Press [4] six times.
ꢁ. Press [3] five times.
ꢂ. Press [7] eight times.
ꢁ) Press [select/channel]. STORE NUMBER is displayed. The cursor
flashes indicating that the phone is ready for the number to be entered.
ꢂ) Use the keypad to enter the phone number (up to twenty digits).
To enter a two-second pause, press [redial/pause].
• You can also enter multiple pauses. Each pause counts as a digit.
• The display shows a P for every pause.
7) Press [memory]. Memory storage is
complete.
Memory01 Stored
ꢃ) After about two seconds, the screen
displays the memory list.
9) Press [end] to exit the memory list. The phone returns to standby.
Storing Caller ID Numbers in Speed Dial Memory
Caller ID names and numbers shown in the Caller ID list can be stored in
speed dial memory.
ꢀ) With the phone in standby, press [cid/menu].
2) Use [vol/ / ] or [vol/ / ] to select the phone number you would like
to store.
3) Press [memory].
4) Enter a number ([0] – [9]) or press [vol/ / ] or [vol/ / ] to select the
memory location to be stored.
ꢁ) Press [select/channel] to store the number.
Note: If a number has already been
Replace Memory?
Yes
ｰNo
stored in the selected memory location,
a confirmation screen is displayed. To
overwrite, press [vol/ / ] to select YES
and press [select/channel].
ꢂ) The display returns to the Caller ID list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chain Dialing
The speed dial memory is not limited to phone numbers. You can store
any number (up to twenty digits) that you need to enter once your call
connects. This is referred to as Chain Dialing. An example is a frequently
refilled prescription number. Store your pharmacy phone number in
one speed dial and your most frequently refilled prescription number as
another speed dial. To use, once connect to your pharmacy's automated
prescription line, simply press [memory] and the speed dial number
where you stored your prescription number and press [select/channel].
6) Using Your Phone
Making and Receiving Calls
Handset on the cradle
Handset off the cradle
ꢀ) Pick up the handset from
the cradle.
2) Press [talk/flash].
3) Listen for the dial tone.
4) Dial the number.
OR
ꢀ) Press [talk/flash].
2) Listen for the dial tone.
3) Dial the number.
OR
Making
a call
ꢀ) Pick up the handset from ꢀ) Dial the number. Then
the cradle.
press [talk/flash].
2) Dial the number. Then
press [talk/flash].
ꢀ) Pick up the handset from
the cradle. (If AutoTalk
is on, the phone will
answer the call when
you pick it up.)
Press [talk/flash] (or
[ /tone/ ], [#/ ] or any
number key if AutoTalk is
on).
Receiving
a call
2) Press [talk/flash].
Hanging up Press [end] or return the handset to the cradle.
Making a Call from Speed Dial Memory
ꢀ) With the phone in standby, press [memory] to open the speed dial list.
2) Enter the number ([0] – [9]), or press [vol/ / ] or [vol/ / ] to select
the speed dial number you would like to dial.
3) Press [talk/flash] to dial the number.
Note: You can also press [talk/flash] before you access the
speed dial memory. When you come to the phone number you
want to dial, press [select/channel].
To cancel speed dialing
Press [end] to return to standby. If accessing the list during an active call,
you can press [memory] to exit the list immediately. If no key is pressed
for thirty seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will
disconnect the call immediately.
Transferring a Call
You can transfer a call from one handset to another. Only one handset at a
time can talk with an outside caller. While one handset is in use, the other
handset cannot go off hook to listen to conversations or make an outgoing
call.
ꢀ) During a call, press [delete/transfer]. The call will automatically be
placed on hold and the transfer tone sounds.
To cancel the transfer and return to the caller, press [delete/transfer]
or [talk/flash] on the handset.
2) When the other handset receives the call, the transfer tone stops.
To receive a transfer call
Do one of the following operation.
• Pick up the handset and press [talk/flash].
• Pick up the handset from the cradle (when AutoTalk is set to on).
• Press any number key, [ /tone/ ] or [#/ ] (when AutoTalk is set to on).
Note: If you transfer a call and it is not picked up after five
minutes, the call will be disconnected.
Redialing the Last Dialed Number
ꢀ) Pick up the handset from the
ꢀ) Pick up the handset from the
cradle.
cradle.
2) Press [talk/flash].
OR
2) Press [redial/pause].
3) Listen for the dial tone.
4) Press [redial/pause].
3) Press [talk/flash].
Adjusting the Handset Earpiece Volume
To change the earpiece volume, press [vol/ / ] or [vol/ / ] during a call.
Adjusting the Ringer Tone and Volume
Changing the Handset Ringer
Your phone has five different ringer tone/volume combinations you can
choose from. With the phone in standby, press [vol/ / ] or [vol/ / ].
To turn the ringer off, select RINGER OFF.
Muting the Handset Ringer
If the handset is off the cradle while an incoming call is ringing, simply press
[end] to mute the incoming ring. The ringer will sound with the next incoming
call.
Note: You can only mute the handset ringer if the handset is off
the cradle when the phone starts ringing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail Waiting Indicator
If you subscribe to voice mail service through your local telephone company,
you can use your cordless telephone to access your voice mailbox. The
voice mail company will provide you with the access number. The in
use/ LED on the base of your phone flashes whenever you have messages
waiting in your voice mailbox.
To access your voice mailbox
Just dial the access number supplied by your voice mail provider to enter
your mailbox. You can program your voice mail access number to a speed
dial number.
If the voice mail waiting indicator remains on after you have retrieved your
messages, press and hold [find] for five seconds. This will reset the indicator.
7) Using Caller ID and Call Waiting
If you subscribe to Caller ID from
your phone company, your phone
will show you the caller's phone
number and name (if available)
whenever a call comes in. If you
The date and
time received
Caller's name
Caller's phone
number
5/11 12:30PM
Jane Smith
214-555-1234
subscribe to both Call Waiting and Caller ID, the phone also shows you the
name and the number of any call that comes in while you're on the line.
If your telephone provider supports seven-digit dialing, you can save your
local area code so it does not display in the Caller ID list. See "Programming
Note: If you answer a call before the Caller ID message is received
(for example, before the second ring), the Caller ID message will
not appear.
Viewing the Caller ID Message List
The Caller ID list stores information for up to thirty incoming calls - even
unanswered calls. If the phone receives more Caller ID messages than it can
store, the oldest one in the list is automatically deleted.
You can also view the Caller ID list during a call.
ꢀ) Press [cid/menu]. The summary screen displays the number of new
messages and total messages.
2) Use [vol/ / ] to scroll through the messages from the latest to the
earliest, or use [vol/ / ] to scroll through the messages from the earliest
to the latest.
3) Press [cid/menu] to return to the call, or press [end] to return to standby.
Note:
• Pressing [end] to exit during a call will disconnect the call
immediately.
• The number of calls from the same Caller ID appears next to the
received time. Once you view the new message, the number will
be cleared and disappear.
• In Caller ID operation, if no key is pressed for more than thirty
seconds, the handset will automatically exit the Caller ID list.
Making a Call from the Caller ID List
ꢀ) With the phone in standby, press [cid/menu].
2) Use [vol/ / ] or [vol/ / ] to select the phone number you would like to dial.
3) To add (or delete) a "ꢀ" before the displayed Caller ID number, press [1].
To add (or delete) the stored area code before the displayed Caller ID
number, press [3].
4) Press [talk/flash] to dial the number.
Note: You can also press [talk/flash] before you access the Caller
ID list. When you come to the phone number you want to dial, press
[select/channel].
Deleting Information from the Caller ID List
Deleting a single Caller ID message
ꢀ) With the phone in standby, press [cid/menu].
2) Use [vol/ / ] or [vol/ / ] to find the message to be deleted from the
Caller ID list.
3) Press [delete/transfer].
4) Press [vol/ / ] or [vol/ / ] to select YES.
ꢁ) Press [select/channel].
Deleting all Caller ID messages
ꢀ) With the phone in standby, press [cid/menu].
2) Press [delete/transfer].
3) Press [vol/ / ] or [vol/ / ] to select YES.
4) Press [select/channel]. All stored Caller ID messages are deleted.
Note: If you get an incoming call or page, the operation is canceled.
Using Call Waiting
While you are on a call, the received Caller ID data is stored on the handset
that is on a call only.
ꢀ) If you have Call Waiting service and a second call comes in when you
are on the phone, a call waiting tone will sound.
2) Press [talk/flash] to accept the waiting call. After a short pause, you will
hear the new caller.
3) To return to the original caller, press [talk/flash] again.
Note: While you are on a call, the received Caller ID data is stored
on the handset that is on a call only.
Download from Www.Somanuals.com. All Manuals Search And Download.
8) Finding a Lost Handset
To locate a lost handset, press [find] on the base. The handsets will beep for
sixty seconds. To cancel paging, press [find] again or press any key on the
found handset.
9) Maintenance
Specifications
The phone complies with FCC Parts ꢀꢁ and ꢂꢃ.
Operating
-ꢀ0°C to +ꢁ0°C (+ꢀ4°F to +ꢀ22°F)
temperature
For the base
For the charger
AD-3ꢀ0 or
AD-ꢀ0ꢀ0
Part number
Input Voltage
AD-000ꢀ
AC Adapter
ꢀ20V AC ꢂ0Hz
ꢀ20V AC ꢂ0Hz
9V DC 2ꢀ0mA
Output Voltage 9V DC 2ꢀ0mA
Part number
Capacity
BT-ꢀ00ꢂ
Battery
ꢁ00mAh, 3.ꢂV
924.ꢁꢀꢂ92ꢁ - 92ꢂ.70442ꢁ MHz
2,40ꢁ.ꢀꢁꢁ942 - 2,4ꢀꢀ.7ꢀꢃ44ꢀ MHz
Frequency
Note: To avoid damage to the phone use only Uniden AD-0001,
AD-310 or AD-1010 and BT-1006 with your phone.
Specifications, features, and availability of optional accessories are all
subject to change without prior notice.
Power Failure
During the period that the power is off, you will not be able to make or
receive calls with the telephone.
Battery Life
With average use, your handset battery provides approximately six hours of
talk time and approximately seven days of standby time. You can achieve
optimum battery life and performance by returning the handset to the base or
charger cradle after each use. When your handset is left off of the cradle, the
battery will gradually discharge even if the handset is not being used. The
actual talk time duration will be reduced in proportion to the amount of time
the handset is off of the cradle.
Low Battery Alert
When the battery pack is very low and needs
to be charged, the phone is programmed to
eliminate functions in order to save power. If the
Low Battery
phone is not in use, LOW BATTERY appears
on the LCD and none of the keys will operate. During a call, LOW BATTERY
flashes and the handset beeps. Complete your conversation as quickly as
possible and return the handset to the cradle for charging.
Note: Information stored in the phone's memory will be retained for
thirty minutes after the battery pack is removed. This includes all
setup information, last number dialed, speed dial memory, and the
CID list.
Even when the battery pack is not being used, it will gradually discharge
over a long period of time. For optimum performance, be sure to return the
handset to the cradle after a telephone call.
Battery Replacement and Handling
Recharge your phone on a regular basis by returning the handset to either
cradle after each phone call. When the operating time becomes short even
after a battery is recharged, please replace the battery. With normal usage,
your battery should last about one year. To order replacement batteries,
please contact Uniden’s Parts Department. The contact information is listed
on the back cover page.
Warning:
To avoid the risk of personal injury or property damage from fire or
electrical shock, only use the Uniden battery model and Uniden adapter
model specifically designated for this product.
Caution:
• Use only the specified Uniden battery pack (BT-1006).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
Cleaning the Battery Charging Contacts
To maintain a good charge, clean the charging contacts
on the handset once a month. Dampen a cloth with plain
water.
Gently rub the damp cloth over the charging contacts until
all visible dirt is removed. Dry the contacts thoroughly
before returning the handset to the cradle.
Caution:
Contacts
Do not use paint thinner, alcohol, or other chemical products. Doing so
may discolor the surface of the telephone and damage the finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
10) Troubleshooting
Re-registering Handsets
There are a few cases when it may be necessary to re-register your
handsets to the base:
• When there is a power failure that lasts more than one hour.
• If a handset's battery is completely discharged. (The handset must be
recharged for ꢀꢁ - 20 hours before re-registering to the base.)
• Any time you experience difficulty connecting to the base to place or
receive calls.
To re-register handsets:
ꢀ) Pick up the handset from the base. Press and hold [find] on the base.
2) While holding [find], place the handset in the base. The in use/ LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds.
3) Pick up the handset from the base and press [talk/flash]. If the display
shows TALK, the handset is registered. If not, place the handset in the
base to try again.
4) Press [end].
ꢁ) Place the next handset in the base and wait for at least five seconds.
No need to hold [find] this time.
ꢂ) Repeat steps 3 - ꢁ with any other handsets you have.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base. If the handset battery pack is completely discharged or the
battery pack is removed, the digital security code will be lost. If this happens,
a new security code is set automatically the next time the battery pack is
charged in the base. In the rare situation that you suspect another cordless
telephone is using the same security code, you can change the code.
To change the digital security code, re-register both handsets to the base
following the instructions in "Re-registering Handsets" above.
Note: Any handsets that are not properly re-register may not be
able to communicate with the base.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base
noise increases. If you pass the range limits of the base, your call will
terminate within one minute.
Solving Common Issues
If your phone is not performing to your expectations, please try these simple
steps first. If these steps do not solve your problem, please call our Customer
Symptom
The in use/ LED • Make sure the AC adapter is plugged into the base or
or LED won't charger and wall outlet.
Suggestion
illuminate when the • Make sure the handset is properly seated in the cradle.
handset is placed • Make sure the charging contacts on the handsets are
in the cradle.
clean.
• Move the handset and/or base away from metal
The audio sounds objects or appliances and try again.
weak and/or
scratchy.
• Press [select/channel] during a call to change the
phone’s channel and help eliminate background noise.
• Make sure the handset is not too far from the base.
• Re-register both handsets.
• Check both ends of telephone cord.
• Make sure the AC adapter is plugged into the base
and wall outlet.
• Disconnect the AC adapter for a few minutes, then
reconnect it.
Can't make or
receive calls.
• Change the digital security code.
• Make sure the handset is not too far from the base.
• Check the dialing mode used by your telephone
company.
• Re-register both handsets.
• The battery pack may be weak. Charge the battery for
ꢀꢁ-20 hours.
• The handset may be too far away from the base.
• Place the base away from appliances or metal objects.
• Change the digital security code.
The handset
doesn't ring or
receive a page.
• Check the battery pack to ensure there is a secure
connection.
• Make sure ringer volume isn’t set to "off."
• Press [select/channel] during a call to change the
phone’s channel and help eliminate background noise.
• Keep both handsets away from microwave ovens,
computers, remote control toys, wireless microphones,
alarm systems, intercoms, room monitors, fluorescent
lights, and electrical appliances.
Severe noise
interference.
• Move the base to another location or turn off the
source of interference.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• The battery pack may be weak: charge the handset.
• Your Caller ID service may not be active; contact your
local telephone service provider.
The Caller ID does
not display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
• Make sure the battery pack is connected to the
handset and fully charged.
• Re-register the non-functional handset.
A handset is not
working.
• Make sure another handset is not already in use. Both
handsets cannot be in talk at the same time.
• Place the handset in the base for at least five seconds
to re-register to the base.
• Make sure the handset is not too far from the base
when trying to use.
Unavailable
message is
displayed on the
LCD screen of the
handset.
The handsets can't
communicate with • Re-register both handsets.
each other.
• Only one handset at a time can talk with an outside
caller. To allow the other handset to talk to the caller,
transfer the call.
No three-way
conversation.
• Contact your local telephone company to make sure
that your telephone receives FSK message signaling.
• Reset the indicator by pressing and holding [find] for
five seconds.
Voice Message
Indication does not
work.
Liquid Damage
Moisture and liquid can damage your cordless phone.
• If the handset or base is exposed to moisture or liquid, but only the exterior
plastic housing is affected, wipe off the liquid, and use as normal.
• If moisture or liquid has entered the plastic housing (i.e. liquid can be
heard in the phone or liquid has entered the handset battery compartment
or vent openings on the base), follow the steps below:
Handset
Base
ꢀ) Remove the battery cover and leave it off for
ventilation.
2) Disconnect the battery pack. Leave the battery
cover off and the battery pack disconnected
for at least three days.
3) Once the handset is completely dry, reconnect
the battery pack and the battery cover.
ꢀ) Disconnect the AC
adapter from the
base, cutting off
electrical power.
2) Disconnect the
telephone cord from
the base.
4) Recharge the handset's battery pack for ꢀꢁ to 3) Let dry for at least
20 hours before using. three days.
IMPORTANT:
You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven. After
following these steps, if your cordless telephone does not work, please call
11) Precautions!
Before you read anything else, please note the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of
fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Cadmium Battery Warning
• This equipment contains a rechargeable nickel-cadmium battery.
• Cadmium is a chemical known to the State of California to cause cancer.
• The rechargeable nickel-cadmium battery contained in this equipment may explode if disposed of
in a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable nickel-cadmium battery used in this equipment in any charger
other than the one designed to charge this battery as specified in the owner's manual. Using
another charger may damage the battery or cause the battery to explode.
Rechargeable Nickel-Cadmium Batteries Must Be Recycled or
Disposed of Properly
As part of our commitment to protecting our environment and conserving natural
®
resources, Uniden voluntarily participates in an RBRC industry program to
collect and recycle used Ni-Cd batteries within the United States. Please call
ꢀ-ꢃ00-ꢃ-BATTERY for information on Ni-Cd battery recycling in your area. (RBRC
®
is a registered trademark of the Rechargeable Battery Recycling Corporation.)
Warning!
The cords on this product and/or accessories contain lead, a chemical known to the State of
California to cause birth defects or other reproductive harm. Wash hands after handling.
Uniden works to reduce lead content in our PVC coated cords in our products and accessories.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
ꢀ. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
fire. They may explode. Check with local authorities for possible battery disposal instructions.
ꢁ. Do not disassemble any component of this product.
SAVE THESE INSTRUCTIONS
CAUTION!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping
this product.
The FCC Wants You To Know
This equipment complies with Part ꢂꢃ of the FCC rules and the requirements adopted by the
ACTA.
On the bottom of this equipment is a label that contains, among other information, a product
identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
Download from Www.Somanuals.com. All Manuals Search And Download.
An applicable Universal Service Order Codes (USOC) certification for the jacks used in this
equipment is provided (i.e., RJꢀꢀC) in the packaging with each piece of approved terminal
equipment. A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part ꢂꢃ rules and requirements
adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for
details.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To
be certain of the number of devices that may be connected to a line, as determined by the total
RENs, contact the telephone provider. For products approved after July 23, 200ꢀ, the REN for
this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. But if advance notice
isn't practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary. The
telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company
will provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service. Please follow instructions for repairing, if any (e.g. battery replacement
section); otherwise do not substitute or repair any parts of the device except as specified in
this manual. Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for information. This
equipment is hearing aid compatible.
Should you experience trouble with this equipment, please contact Uniden customer service
at ꢃ00-297-ꢀ023. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is resolved.
NOTICE: According to telephone company reports, AC electrical surges, typically resulting from
lightning strikes, are very destructive to telephone equipment connected to AC power sources.
To minimize damage from these types of surges, a surge arrestor is recommended.
Changes or modifications to this product not expressly approved by Uniden, or operation of this
product in any way other than as detailed by the owner's manual, could void your authority to
operate this product.
This device complies with part ꢀꢁ of the FCC rules. Operation is subject to the following two
conditions: (ꢀ) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation. Privacy
of communications may not be ensured when using this phone.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the handset and base of
your cordless telephone are accomplished by means of radio waves which are broadcast
over the open airways. Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than your own cordless
telephone unit. Consequently, any communications using your cordless telephone may not be
private.
I.C. Notice
Terminal Equipment
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before
the registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not imply
that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on
the equipment itself. The REN assigned to each terminal equipment provides an indication
of the maximum number of terminals allowed to be connected to a telephone interface. The
termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed five.
Radio Equipment
The term "IC:" before the radio certification number only signifies that Industry Canada
technical specifications were met. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. "Privacy of communications
may not be ensured when using this telephone".
12) One Year Limited Warranty
Important: Evidence of original purchase is required for warranty service. WARRANTOR:
UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden
warrants, for one year, to the original retail owner, this Uniden Product to be free from defects
in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further
effect ꢀ2 months after the date of original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified, altered, or used as part
of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized Uniden service center
for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment
or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed
by anyone other than as detailed by the owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty
at any time while this warranty is in effect, warrantor will either, at its option, repair or replace
the defective unit and return it to you without charge for parts, service, or any other cost
(except shipping and handling) incurred by warrantor or its representatives in connection with
the performance of this warranty. Warrantor, at its option, may replace the unit with a new or
refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion
or limitation of incidental or consequential damages so the above limitation or exclusion may
not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. This warranty is void outside the United States of America
and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that the Product is defective,
pack the Product carefully (preferably in its original packaging). Disconnect the battery from the
Product and separately secure the battery in its own separate packaging within the shipping
carton. The Product should include all parts and accessories originally packaged with the
Product. Include evidence of original purchase and a note describing the defect that has
caused you to return it. The Product should be shipped freight prepaid, by traceable means, to
warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
May be covered under one or more of the following U.S. patents:
4,797,9ꢀꢂ ꢁ,42ꢂ,ꢂ90 ꢁ,434,90ꢁ ꢁ,49ꢀ,74ꢁ ꢁ,493,ꢂ0ꢁ ꢁ,ꢁ33,0ꢀ0 ꢁ,ꢁ74,727 ꢁ,ꢁꢃꢀ,ꢁ9ꢃ ꢁ,ꢂꢁ0,790
ꢁ,ꢂꢂ0,2ꢂ9 ꢁ,ꢂꢂꢀ,7ꢃ0 ꢁ,ꢂꢂ3,9ꢃꢀ ꢁ,ꢂ7ꢀ,24ꢃ ꢁ,ꢂ9ꢂ,47ꢀ ꢁ,7ꢀ7,3ꢀ2 ꢁ,732,3ꢁꢁ ꢁ,7ꢁ4,407 ꢁ,7ꢁꢃ,2ꢃ9
ꢁ,7ꢂꢃ,34ꢁ ꢁ,7ꢃ7,3ꢁꢂ ꢁ,794,ꢀꢁ2 ꢁ,ꢃ0ꢀ,4ꢂꢂ ꢁ,ꢃ2ꢁ,ꢀꢂꢀ ꢁ,ꢃꢂ4,ꢂꢀ9 ꢁ,ꢃ93,034 ꢁ,9ꢀ2,9ꢂꢃ ꢁ,9ꢀꢁ,227
ꢁ,929,ꢁ9ꢃ ꢁ,930,720 ꢁ,9ꢂ0,3ꢁꢃ ꢁ,9ꢃ7,330 ꢂ,044,2ꢃꢀ ꢂ,070,0ꢃ2 ꢂ,ꢀ2ꢁ,277 ꢂ,2ꢁ3,0ꢃꢃ ꢂ,3ꢀ4,27ꢃ
ꢂ,4ꢀꢃ,209 ꢂ,ꢂꢀꢃ,0ꢀꢁ ꢂ,ꢂ7ꢀ,3ꢀꢁ ꢂ,7ꢀ4,ꢂ30 ꢂ,7ꢃ2,09ꢃ ꢂ,7ꢃꢃ,920 ꢂ,7ꢃꢃ,9ꢁ3 ꢂ,ꢃ39,ꢁꢁ0 ꢂ,ꢃꢃ9,ꢀꢃ4
ꢂ,90ꢀ,27ꢀ ꢂ,907,094 ꢂ,9ꢀ4,940 ꢂ,9ꢁ3,ꢀꢀꢃ 7,023,ꢀ7ꢂ 7,030,ꢃꢀ9 7,ꢀ4ꢂ,ꢀꢂ0
Other patents pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
|