UNIDEN
CORDLESS
TELEPHONES
DECT1588 Series
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.
from.the.actual.unit.
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.
disabilities,.please.call.the.accessibility.voice/TTY.line:.1-800-874-9314.
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.
call.you.back.
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
.
.
.
.
.
.
.
5,491,745.
5,717,31ꢀ.
5,8ꢀ5,161.
5,987,330.
6,418,ꢀ09.
6,901,ꢀ71.
7,ꢀ03,307.
5,533,010.
5,73ꢀ,355.
5,864,619.
6,044,ꢀ81.
6,618,015.
6,907,094.
7,ꢀ06,403.
5,574,7ꢀ7.
5,754,407.
5,893,034.
6,070,08ꢀ.
6,714,630.
6,914,940.
7,310,398
5,581,598.
5,758,ꢀ89.
5,91ꢀ,968.
6,076,05ꢀ.
6,78ꢀ,098.
6,940,867.
5,650,790.
5,768,345.
5,915,ꢀꢀ7.
6,1ꢀ5,ꢀ77.
6,788,9ꢀ0.
6,953,118.
5,660,ꢀ69.
5,787,356.
5,9ꢀ9,598.
6,ꢀ53,088.
6,788,953.
7,0ꢀ3,176.
5,663,981.
5,794,15ꢀ.
5,930,7ꢀ0.
6,314,ꢀ78.
6,839,550.
7,030,819.
5,671,ꢀ48
5,801,466
5,960,358
6,3ꢀ1,068
6,889,184
7,146,160
Other.patents.pending.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:
PLACE YOUR BASE
TRY TO AVOID
• Microwave ovens
• Refrigerators
• Fluorescent
lighting
• Other cordless
telephones
Near an AC outlet and
a telephone wall jack.
• Personal computers
• Wireless LAN
equipment
• Areas with
a lot of
background
noise
• TVs
• Other electronics
• Dust
• Excessive
moisture
• Shock
• Vibration
In a centrally-located
open area.
• Direct sunlight
• Extreme temperatures
Notes:.For.maximum.range:.
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Battery
Use.only.the.Uniden.BT-1015.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Unpack all handsets,
battery packs, and battery
covers. (If the battery cover
is on the handset, press in
on the notch and slide the
cover off.)
Line up the red and black wires on
the battery pack connector with the
sticker in the handset’s battery
compartment.
Push the battery pack
connector in firmly. (You
should hear it click into
place.) Gently tug on the
battery wires to make
sure the connection is
secure.
RED
BLACK
Place the cover over the
battery compartment
and slide it up into
place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Handset
Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.
Connect the AC
adapter to the
DC IN 9V jack and
route the cord
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
through the molded
wiring channel.
Place the handset in the charging
cradle with the display facing forward.
What if the charge LED doesn’t light up?
Reseat the handset; make sure the
contacts on the bottom of the handset are
lined up with the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Make sure that the charge
LED illuminates when the
handset is seated.
Charge your handset at least 15 to 20 hours before plugging into the phone line.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Base
To avoid risk of fire and shock, only use the Uniden PS-0008 AC adapter with the base.
Connect the coiled cord to the left
side of the phone and the base
corded handset.
Connect the AC adapter
to the DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord
through the molded
wiring channel.
Don’t put any power cord where
it people might trip over it or step
on it. If a power cord becomes
chafed or worn out, it can create
a fire or electrical hazard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the Phone Line
Connect the
telephone
Route the cord through the
molded wiring channel.
cord to the
TEL LINE jack.
Connect the
telephone cord
to a telephone
wall jack.
What if Check TEL Line appears
on the base or handset display?
The telephone cord may not be
connected correctly. Check the
telephone cord connection.
Telephone
wall jack
Telephone
Do you have DSL or any high-speed Internet service
delivered through your phone line?
cord
Try putting a DSL filter between the base and the wall
jack. Without a filter, telephone-line-based Internet
services can interfere with standard phones.
DSL filter
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Testing the Connection
Pick.up.the.handset.from.the.cradle.and.press.TALK/FLASH..You.should.hear.a.dial.tone,.and.the.display.
should.show.Talk.
What.if.I.can’t.hear.a.dial.tone?
Check.the.telephone.cord.connection.on.the.base.
What.if.the.display.doesn’t.show.Talk?.
• Check.the.battery.pack.connection.in.the.handset.
• Make.sure.the.battery.pack.is.fully.charged..
• Make.sure.the.AC.adapter.cord.is.securely.connected.to.the..
DC IN 9V jack.and.a.standard.power.outlet.
Make.a.quick.test.call,.and.then.press.END.to.hang.up..
What.if.there.is.a.lot.of.static?.
Check.the.sources.of.interference.described.in.Choosing.the.
What.if.the.call.doesn’t.go.through?
Try.changing.the.dialing.mode.(see.the.next.section).
Note:. Make.sure.you.can.get.a.dial.tone.on.any.accessory.handsets.that.were.packaged.with.your.phone..
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Changing the dial mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing..These.
days,.most.base.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.dialing..If.
your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get.a.dial.tone.
or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
1) Press.MENU/SELECT..
ꢀ) Select.the.Global Setup.menu,.and.then.the.Dial Mode.submenu.
3) Scroll. .to.highlight.Pulse.
4) Press.MENU/SELECT. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.Tone.in.step.3.
NOW YOU ARE READY TO USE YOUR PHONE!
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Expanding Your Phone
Adding accessory handsets
Your.phone.supports.a.total.of.six.cordless.handsets,.including.any.that.were.supplied.with.your.phone..You.can.now.
place.a.fully-featured.cordless.handset.anywhere.AC.power.is.available.to.connect.the.charging.cradle.
• Your.phone.is.compatible.with.the.following.Uniden.DECT.6.0.accessory.handsets:.DCX150,.DCXꢀ00,.and.
DCX300..(Please.visit.our.website.at.www.uniden.com.for.the.most.up-to-date.list.of.compatible.handsets.)
• If.you.purchase.any.accessory.handsets.separately,.you.must.register.the.handsets.to.the.base.before.you.can.
use.them..(Accessory.handsets.that.come.packaged.with.a.base.are.already.registered.to.that.base.)
Registering accessory handsets
When.charged,.registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.display:
.. ..
↔
To.register.an.accessory.handset:
1) Charge.the.handset.completely..(For.the.DCX150.accessory.handset,.see.page.8.for.instructions.on.connecting.
the.charging.cradle.and.charging.the.handset..For.a.DCXꢀ00.or.DCX300.accessory.handset,.see.the.manual.
supplied.with.the.handset.for.instructions.on.connecting.the.charging.cradle.and.charging.the.handset.)
ꢀ) With.the.phone.in.standby,.press.MENU/SELECT.on.the.base..
3) Move.the.cursor.to.select.the.Register Handset.menu,.and.then.press.MENU/SELECT..Handset.Registering.will.
appear.
4) On.the.handset,.press.and.hold.#.until.the.handset.beeps.and.displays.Handset.Registering.
5) When.the.handset.has.registered.to.the.base,.the.LCD.will.display.Registration Complete.then.show.the.handset.
ID.number..
If.the.display.shows.Registration failed,.repeat.the.process.again.
Note:. If.a.handset.has.ever.been.registered.to.a.base,.reset.the.handset.before.you.register.it.to.a.new.base.(see.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Multiple Bases
The.handsets.supplied.with.your.phone.can.be.registered.to.a.total.of.four.different.bases..Compatible.bases.include.
the.DECT1500.series.and.the.WXIꢀ077.series..(See.our.website.or.contact.Customer.Service.for.an.up-to-date.list.
of.compatible.models.)
Note: To confirm how many bases the handset is registered to, open the Select Base.submenu.(follow.the.step.1.of.
Registering the handset to another base
To.register.a.handset.to.another.base:
1) Make.sure.the.handset.battery.is.fully.charged.
ꢀ) If.the.other.base.has.an.LCD.display:
• With.the.phone.in.standby,.press.MENU/SELECT.on.the.base..Move.the.cursor.to.select.the.Register
Handset.menu,.and.then.press.MENU/SELECT..Handset Registering.will.appear.
If.the.other.base.does.not.have.an.LCD.display:.
• Disconnect.the.base.AC.adapter..Then.press.and.hold.the.Find Handset.key*.while.you.reconnect.the.
adapter..Keep.holding.the.Find Handset.key.until.the.charge.LED.starts.to.blink..
*This.key.might.be.labeled.Find.or.Find HS.
3) On.the.handset,.press.MENU/SELECT..Select.the.Register Base.menu..Handset Registering.will.appear.in.the.
display..(After.step.ꢀ,.you.have.thirty.seconds.to.complete.this.step.3.before.the.system.returns.to.standby.)
4) Wait.approximately.thirty.seconds..Registration complete.will.be.displayed.to.indicate.the.handset.has.been.
registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned..The.handset.assigns.its.own.ID.to.this.
base,.too..(Since.the.base.ID.is.based.on.the.order.in.which.the.handset.was.registered.to.the.different.bases,.a.
base.may.have.different.IDs.on.each.handset.)
If.Registration failed.appears.in.the.LCD,.please.try.these.steps.again.
Note:. The.handset.will.stay.connected.to.the.new.base.until.you.select.a.different.base.(see.below).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the base
After.you.register.your.handset.to.more.than.one.base,.you.can.set.the.handset.to.automatically.search.for.a.new.
base.if.the.base.it’s.currently.connected.is.unavailable.or.out.of.range..You.can.also.manually.select.which.base.you.
want.the.handset.to.connect.to;.for.example,.if.you.have.one.base.with.an.answering.machine,.you.can.connect.to.
that.base.to.check.messages.from.the.handset.
1) With.the.phone.in.standby,.press.MENU/SELECT..Select.the.Handset Setup.menu,.and.then.the.Select Base.
submenu.
ꢀ) Move.the.cursor.to.select.the.base.you.want.to.connect.to,.or.choose.Auto.to.have.the.handset.automatically.
search.for.and.select.base.
3) Press.MENU/SELECT..Searching.will.appear.in.the.display.
4) When.the.base.is.found,.the.handset.will.return.to.standby..If.the.base.is.not.found,.“Searching”.continues.
to appear. You can repeat the procedure listed above to return back to the original connection or to find the
different.base.
Note:. You.cannot.change.bases.during.a.call..
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know Your New Phone
Features
• 1.9GHz.DECT.6.0.expandable.system
• 7.ringer.options.on.handset.(3.tones/4.melodies)
• Last.5.number.redial
• Expands.up.to.6.handsets
• Corded.handset.with.base.keypad
• Cordless.handset.and.charging.cradle.
• 70-number.phonebook.with.alphabetical.search
• Trilingual.menu.displays.on.handset.
(English,.Spanish,.or.French).
&.Bilingual.menu.displays.on.base.
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
• Personalized.ring.and.display.name.by.party..
(on.handset)
• Call.transfer
• Conferencing
• Intercom
• Transfer.single.listing.or.entire.phonebook
• Caller.ID/Call.Waiting.with.phonebook.match
• Store.30.Caller.ID.numbers
• Speakerphone.on.base.&.handset
Answering system features
• Digital.tapeless.recording
• Day.and.time.announcement
• Remote.message.retrieval
• Toll.saver
• Up.to.14.minutes.of.recording.time
• Call.screening
• Personal.or.pre-recorded.outgoing.messages
• Message.alert
• Bilingual.voice.prompts..
• Records.up.to.59.messages.
(for.US.models:.English.and.Spanish,..
for.Canadian.models:.English.and.French)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology Used in this Manual
Accessory
Handsets
Additional.handsets.that.can.register.to.the.base,.allowing.you.to.add.handsets.without.connecting.another.
phone.line..This.base.supports.a.total.of.six.cordless.handsets;.see.page.13.for.compatible.handsets.
Base
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.
Charging
cradle
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.pack.
It.connects.to.power.but.does.not.connect.to.a.phone.line.
Caller.ID.is.available.from.your.telephone.provider.and.is.offered.to.users.on.a.subscription.basis.
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number.
CID
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.telephone.provider.
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.
CID/CW
Any.settings.that.apply.to.all.registered.handsets.and.the.base.
These.features.are.available.by.selecting.“Global Setup”.or.“Day & Time”.in.the.handset.menu..Only.one.
handset.can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.currently.being.
used..If.you.have.multiple.bases,.the.different.bases.have.each.global.settings;.select.the.base.before.
Global
Settings
The.handset.and.the.base.are.not.in.use..(It.doesn’t.matter.whether.the.handset.is.in.the.cradle:.the.TALK/
Standby
FLASH.or.
.on.the.handset.or.
.on.the.base.hasn’t.been.pressed.or.the.base.corded.handset.hasn’t.
been.picked.up.from.the.base,.and.there.is.no.dial.tone.)
Station
Talk
Any.registered.handset.or.the.base.
A.dial.tone.has.been.enabled,.so.you.can.dial.and.carry.on.a.conversation.with.an.outside.party.
Manual Conventions
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:
• Bold italic text.indicates.a.key.or.button.on.the.phone
• Italic text indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold.text.indicates.a.status.light.on.the.phone
• ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charging.cradle
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Handset
new message LED
Earpiece
Display (LCD)
key (up)
CLEAR/INT'COM key
(clear/intercom)
MENU/SELECT key
Speakerphone
speaker and ringer
key (phonebook/left)
key (caller ID/right)
END key
TALK/FLASH key
key (down)
key (speaker)
Twelve-key dial pad
Battery compartment
/TONE key
# key
REDIAL/PAUSE key
/MUTE key
(messages/mute)
Microphone
Charging contacts
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Base
ANSWER ON/OFF key
CLEAR key
Display (LCD)
/
key
(repeat/left/phonebook)
key (up)
Corded
handset
key and LED
(play/stop)
/
key (skip/right/caller ID)
SELECT
MENU
CLEAR
MENU/SELECT key
Antenna
Speaker
ON/OFF
DELETE key
key (down)
MUTE key
ANSWER
DELETE
VOLUME+/
-
HOLD
FIND
DEF
ABC
MUTE
1
4
7
2
3
6
9
Coiled
handset
cord
INTCOM
JKL
GHI
MNO
5
REDIAL
PAUSE
FLASH
FLASH key
WX
YZ
PQ
RS
TUV
8
key and LED (speaker)
OPER
TONE
0
MIC
Microphone
# key
/TONE key
FIND/HOLD/INT'COM key (find/hold/intercom)
REDIAL/PAUSE key
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Reading the Display
Handset
In standby
Time
During a call
6CNMꢀꢀꢀꢀꢀ2ꢀꢀ
ꢀꢁ1((ꢀꢂꢃꢁꢄꢄ#
ꢀꢀꢀ*CPFUGVꢀꢅꢂ
ꢀꢀꢀ0GYꢀ%+&ꢁꢀꢆ
Handset ID and banner
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢄꢁꢄꢄ
ꢀꢀꢀ
Call duration
Number of new
Caller ID calls received
.
Note:.The.handset.does.not.display.the.day.and.time.
Base
In standby
Status of your
Status of your
During a call
answering system
answering system
Answer ON OFF
Answer ON OFF
Day of the week
and time
Number of new
Caller ID calls received
Message counter
Call duration
Message counter
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.
The.voice mail.icon.appears.when.you.have.messages.waiting.in.your.voice.mailbox.
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.
The.speaker.icon.appears.when.the.speaker.phone.is.in.use.
The.T-coil.icon.appears.when.the.T-coil.Mode.is.turned.on.
The.mute.icon.appears.while.the.microphone.is.muted.
The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Four-way Function Key
Increase the volume
Your.handset.and.base.have.a.four-way.function.key.
that.allows.you.to.move.the.cursor.on.the.display.and.
access.the.most.commonly.used.features.at.the.touch.of.
a.button.
• Press.the.left.side.of.the.key.to.open.the.phonebook.
• Press.the.right.side.of.the.key.to.open.the.Caller.ID.
list..
• Press.the.top.of.the.key.to.increase.the.ringer.volume.
(while.the.phone.is.in.standby).or.speaker.volume.
(while.you.are.on.a.call).
Open the
phonebook
Open the
Caller ID list
Four-way
Function Key
• Press.the.bottom.of.the.key.to.decrease.the.ringer.
volume.(while.the.phone.is.in.standby).or.speaker.
volume.(while.you.are.on.a.call).
Decrease the volume
Using the Menus
The.menus.for.the.handset.and.the.base.work.in.the.same.way:
• To.open.the.menu,.press.the.MENU/SELECT.key.
• The.arrow.cursor.on.the.left.side.of.the.line.shows.which.menu.item.is.currently.highlighted..Use.
way.function.key.to.move.the.cursor.up.and. .to.move.the.cursor.down.
• To.select.the.highlighted.option,.press.MENU/SELECT.
on.the.four-
• To.go.back.to.the.previous.screen,.press.left.on.the.four-way.function.key.
• To.exit.the.menu.on.the.handset,.press.END..
• To.exit.the.menu.on.the.base,.press.
.
• If.you.don’t.press.any.keys.for.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu..(When.setting.the.day.
and.time,.the.time-out.period.is.extended.to.two.minutes.)
• For.Ans..Setup,.Global Setup.and.Register Handset.(base.only).menu.options,.make.sure.the.line.is.not.in.use.
and.the.handsets.are.within.range.of.the.base..If.you.have.multiple.bases,.be.sure.to.select.the.correct.base.
before.changing.the.menu.options.
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text from Your Phone
You.can.use.the.number.keypad.on.your.handset.or.base.to.enter.text.by.referring.to.the.letters.printed.on.each.
number key. When you press the number key in a text entry field, the phone displays the first letter printed on the
number.key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third.
• When.[Aa] appears on the display, capital letters are displayed first, then lower case letters, and then the number
on.the.key.
• When.[aA] appears on the display, lower case letters are displayed first, then the number on the key, and then
capital.letters.
• When you input the first letter or a letter after a blank space, the default mode is [Aa]..From.the.next.letter,.the.
mode.changes.to.[aA].automatically.
• You.can.switch.back.and.forth.the.mode.manually.between.[Aa] and.[aA]..Press. /ToNE;.the.case.(small/capital).
of.the.letter.entered.changes.also.
If two letters in a row use the same number key, enter the first letter, then use right on.the.four-way.function.key.to.
move.the.cursor.to.the.next.position.to.enter.the.second.letter..
Number of times key is pressed (when [Aa] appears on the display)
For.example,.to.enter.the.word.“Movies”:.
1) Press.6.once.to.enter.M.
1
ꢀ) Use.right.on.the.four-way.function.key.to.move.the.
2 ABC
cursor.to.the.right.
3 DEF
4 GHI
3) Press.6.three.times.to.enter.o.
4) Press.8.three.times.to.enter.v.
5) Press.4.three.times.to.enter.i.
6) Press 3.two.times.to.enter.e.
7) Press.7.four.times.to.enter.s.
8) Press.MENU/SELECT.to.end.your.text.entry.
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ
0 OPER
If.you.make.a.mistake.while.entering.a.name,.use.right or.
left on.the.four-way.function.key.to.move.the.cursor.to.the.
incorrect.character..Press.CLEAr/INT’CoM.on.the.handset.or.CLEAr.on.the.base.to.erase.the.wrong.character,.
and.then.enter.the.correct.character..To.delete.all.characters,.press.and.hold.CLEAr/INT’CoM.on.the.handset.or.
CLEAr.on.the.base.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
Selecting a Language
Your.handset.supports.three.languages:.English,.French.and.Spanish..And.
your.base.supports.two.languages:.English.and.Spanish.for.US.models.or.
English.and.French.for.Canadian.models..You.can.set.the.station’s.language.
individually..Once.you.select.a.language,.the.menus.on.the.station.will.
display.in.that.language..The.default.language.is.English.
*CPFUGVꢀ.CPIWCIG
ꢀ'PINKUJ
ꢀ(TCP㩟CKU
1) Press.MENU/SELECT..
ꢀ) On.the.handset,.select.the.Handset.Setup.menu,.and.then.the.Handset
Language.submenu..
On.the.base,.select.the.Base.Setup.menu,.and.then.the.Base Language.
submenu.
3) On.the.handset,.move.the.cursor.to.choose.English,.Français.(French).
or.Español.(Spanish)..
On.the.base,.move.the.cursor.to.choose.from.two.languages..
for US models:.Choose.English.or.Español.(Spanish)..
for Canadian models:.Choose.English.or.Français.(French).
4) Press.MENU/SELECT. You will hear a confirmation tone.
Setting the Day & Time
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.on.the.
answering.system.may.not.have.the.correct.time.and.day.stamp.
ꢀꢀꢀ&C[ꢀꢁꢀ6KOG
ꢀꢀ570ꢀꢂꢃꢄꢅꢅꢀ#/
ꢀꢀ=㨲ꢆ㨱ꢆUGNGEV?
To.change.the.time.shown.in.the.display,.follow.the.steps.listed.below..
1) Press.MENU/SELECT.
ꢀ) Move.the.cursor.to.Day & Time.and.press.MENU/SELECT.
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Use. .and. .to.select.the.day.of.the.week,.and.press.MENU/SELECT.
Note:.The.day.of.the.week.does.not.appear.on.the.handset.display.
4) Use.the.number.keypad.(0.through.9).to.enter.the.hour.and.minutes.
5) Use. .and. .to.select.AM.or.PM,.and.press.MENU/SELECT. You hear a confirmation tone.
Activating Personal Ring (Handset only)
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.
you.know.who.is.calling..To.turn.the.personal.ringing.on.or.off,.follow.these.steps:
1) Press.MENU/SELECT..
ꢀ2GTUQPCNꢀ4KPI
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Personal Ring.
ꢀ1P
submenu.
ꢀ1HH
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
Activating the Key Touch Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.
1) Press.MENU/SELECT..
Key Touch Tone
ꢀ) Select.the.Handset Setup.or.Base.Setup.menu,.and.then.the.Key
On
Touch Tone.submenu.
Off
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Phonebook
Each.station.has.its.own.separate.phonebook.that.holds.up.to.seventy.names.and.numbers..When.a.station’s.
phonebook.is.full,.the.station.beeps.and.shows.Memory Full.on.the.display..You.cannot.add.any.names.and.numbers.
in.that.station’s.phonebook.until.you.delete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects..This.is.referred.to.as.chain.dialing..(See.Chain.dialing.from.the.phonebook.on.page.3ꢀ.)
Creating Phonebook Entries
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:
1) With.the.phone.in.standby,.press. .(on.the.left.side.of.the.four-way.key).
ꢀꢀꢀ'FKVꢀ0COG
ꢀ) To.create.a.new.phonebook.entry,.press.MENU/SELECT..Select.the.Create
㨫
New.menu..Edit Name.appears.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ=#C?
3) Enter the name for this entry (Edit Name)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.
Text.from.Your.Handset.on.page.ꢀꢀ.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.
entry,.your.phone.will.store.this.entry.as.No Name..Press.MENU/SELECT when you are finished.
4) Enter the number for this entry (Edit Number).
Once.you.have.stored.a.name,.Edit Number.appears.next..Use.the.number.
keypad.to.enter.the.phone.number;.the.phone.number.can.contain.up.to.
twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.dialing.
(for.example,.to.enter.an.extension.or.an.access.code),.press.rEDIAL/
ꢀꢀ'FKVꢀ0WODGT
ꢁꢂꢂꢃꢄꢂꢄꢅꢆꢇ㨫
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
PAUSE.to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..
Each.pause.counts.as.one.digit..Press.MENU/SELECT.when.you.are.
finished.
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Assign a personal ring tone for this entry (Personal ring) (Handset only).
You.can.attach.a.special.ring.tone.to.each.phonebook.entry;.the.phone.will.
use.this.ring.tone.when.this.person.calls..Use. .and. .to.select.one.of.
for.a.complete.list.of.ring.tones)..As.you.scroll.through.the.tones,.you.will.
hear.a.sample.of.each.tone.(unless.the.handset.ringer.volume.is.set.to.off)..
When.you.hear.the.ring.tone.you.want.to.use,.press.MENU/SELECT..If.you.
do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.entry,.choose.No
Selection;.the.phone.will.use.your.standard.ring.tone.setting.
ꢀ2GTUQPCNꢀ4KPI
ꢀ0Qꢀ5GNGEVKQP
ꢀ(NKEMGT
6) You will hear a tone confirming that the new entry has been stored, and Done!.appears.in.the.display.
Finding a Phonebook Entry
Press. .to.open.the.phonebook..Phonebook.entries.are.stored.in.alphabetical.order..To.scroll.through.the.
phonebook.from.A.to.Z,.press. ..To.scroll.through.the.phonebook.from.Z.to.A.press.
.
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.
for.an.entry.beginning.with.the.letter.M,.press.6 once. The phonebook jumps to the first entry that begins with the
letter.you.entered;.you.can.then.use. .and. .to.scroll.to.other.entries.
To.close.the.phonebook.and.return.to.standby,.press.END..If.you.are.looking.up.a.phonebook.entry.during.a.call.and.
want.to.close.the.phonebook,.press. .again.instead.of.END.
Editing an Existing Phonebook Entry
1) With.the.phone.in.standby,.press. .to.open.the.phonebook.
ꢀ) Find.the.entry.you.want.to.edit.and.press.MENU/SELECT.
3) Select.Edit..Follow.the.steps.for.Creating.Phonebook.Entries.on.page.ꢀ5..If.you.do.not.wish.to.change.the.
information.at.any.step,.simply.press.MENU/SELECT.to.go.to.the.next.step.
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Caller ID or Redial Numbers in the Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
1) With.the.phone.in.standby,.press. .to.open.the.Caller.ID.list.or.rEDIAL/PAUSE.to.open.the.redial.list.
ꢀ) Use. .and. .to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.you.
want.to.store,.press.MENU/SELECT..
Note:..If.you.need.to.add.(or.delete).a.“1”.to.the.beginning.of.the.Caller.ID.phone.number,.press. /ToNE.(see..
.
.
page.33)..If.you.need.to.add.(or.delete).the.stored.area.code.to.the.Caller.ID.phone.number,.press.#.(see..
3) Select.Store into PB..Edit Name.appears..If.the.phone.number.is.already.stored.in.memory,.you.will.hear.a.
beep,.and.This data is already saved!.appears.in.the.display..The.number.will.not.be.stored.
Deleting a Single Phonebook Entry
1) With.the.phone.in.standby,.press.
.
Edit
ꢀ) Find.the.entry.that.you.want.to.delete.and.press.MENU/SELECT..
3) Select.Delete..Delete Entry?.appears.in.the.display.
4) Move.the.cursor.to.select.Yes.
Copy
Delete
5) Press.MENU/SELECT. You will hear a confirmation tone, and Deleted!.appears.in.the.display..
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting all Phonebook Entries
1) With.the.phone.in.standby,.press.
.
ꢀ) Press.MENU/SELECT,.and.then.select.Delete All..Delete All?..
ꢀ%TGCVGꢀ0GYꢀ
ꢀ%QR[ꢀ#NN
appears.in.the.display.
3) Move.the.cursor.to.select.Yes.
ꢀ&GNGVGꢀ#NN
4) Press.MENU/SELECT. You will hear a confirmation tone, and Deleted!..
appears.in.the.display.
Copying Phonebook Entries to Another Station
You.can.transfer.phonebook.entries.from.one.station.to.another.without.having.to.re-enter.names.and.numbers..You.
can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
1) With.the.phone.in.standby,.press. ..
ꢀ) To copy one entry, find the phonebook entry you want to copy. Press MENU/SELECT,.and.then.select.Copy..
To.copy.all.entries,.press.MENU/SELECT,.and.then.select.Copy All.
3) Move.the.cursor.to.select.the.station.which.you.want.to.transfer.the.entries.to.and.then.press.MENU/SELECT.
If.you.select.Copy All,.Are you sure?.appears.on.the.display.screen..Move.the.cursor.to.select.Yes,.and.then.
press.MENU/SELECT.
.
4) The.phonebook.entries.will.be.transferred.to.the.designated.station..During.the.copy.process,.the.receiving.
station.shows.Receiving.and.the.ID.of.the.sending.station.
5) When.the.transfer.is.completed,.Done!.appears.on.the.station.
.
•.If.the.station.you.want.to.transfer.to.already.has.seventy.entries.in.its.phonebook,.you.will.hear.a.beep,.and.
Not enough memory in receiving unit.appears.on.the.display..
.
•.If.the.selected.station.is.out.of.range.or.data.transfer.is.cancelled,.Unavailable.appears.in.the.display..
Phonebook.listings.will.not.be.transferred.
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Handsets
All.of.the.following.options.are.set.separately.for.each.handset,.so.you.can.customize.a.handset.for.each.room.in.
your.house.
Changing the Handset Banner
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.
default.banner.is.Handset.#1,.Handset.#ꢀ,.etc..You.can.change.the.name.your.
phone.displays.by.changing.the.banner.display..If.you.have.more.than.one.handset,.
the banner name identifies your handset.
1) Press.MENU/SELECT..
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Banner.submenu.
3) Use.the.keypad.to.enter.or.edit.the.banner.name..(See.Entering.Text.from.Your.Handset.on.page.ꢀꢀ.for.detailed.
instructions.on.entering.text.)
4) Press.MENU/SELECT. You will hear a confirmation tone.
Note:.. When.you.have.multiple.bases.and.even.if.the.handset.ID.is.changed.when.you.switch.to.a.different.base,.
the.handset.will.keep.the.banner.name.
Selecting a Ring Tone
You.may.choose.from.four.melodies.or.three.tones.for.your.
phone’s.primary.ring.tone..Each.handset.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.as.listed:
Fur.Elise.(Elise)
Flicker
Clatter
Wake.Up
We.Wish.You.A.Merry
Christmas.(Merry-Xmas)
Aura.Lee.(Aura Lee)
Star.Spangled.Banner
(Star Spngl)
Tones
Melodies
1) Press.MENU/SELECT..
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Ringer Tones.submenu.
3) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
hear.a.sample.(unless.the.handset.ringer.volume.is.set.to.off).
4) When.you.hear.the.tone.you.want.to.use,.press.MENU/SELECT..You.will.hear.a.
confirmation tone.
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating AutoTalk
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.
a.button.to.answer.the.call.
1) Press.MENU/SELECT..
ꢀ) Select.the.Handset Setup.menu,.and.then.the.AutoTalk.submenu.
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
Activating Any Key Answer
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.twelve-key.dial.pad..
1) Press.MENU/SELECT..
ꢀ) Select.the.Handset Setup.menu,.and.then.the.Any Key Answer.submenu.
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
Using Your Phone
During a Power Failure
Because.the.phone.is.a.corded/cordless.combination.phone,.it.can.still.perform.several.of.its.functions.during.a.
power.failure..The.following.features.will.function.with.base.corded.handset.even.during.a.power.failure:
• Making.and.receiving.calls.with.the.base.corded.handset
• Corded.handset.volume.control
• Call.Waiting.on.a.base.corded.handset.call
• Entering.pauses.when.dialing.from.the.base.corded.handset
• A.special.ring.tone.will.sound.during.a.power.failure.and.you.will.not.be.able.to.control.the.volume.setting.of.this.
ring.
All.other.features.are.disabled.during.a.power.failure.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Receiving Calls
From the base
speakerphone
From the base
corded handset
From a handset
speakerphone
From a cordless handset
1) Pick.up.the.handset.
1) Pick.up.the.corded.
handset.from.the.
base.
1) Pick.up.the.handset.
from.the.cradle.
1) Press.
.
from.the.cradle.
ꢀ) Press.
.
ꢀ) Listen.for.
ꢀ) Press.TALK/FLASH.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
the.dial.tone.
ꢀ) Listen.for.the.dial.
3) Listen.for.the.dial.
tone.
tone.
3) Dial.the.
Making
a call
number.
3) Dial.the.number.
4) Dial.the.number.
OR
OR
OR
OR
1) Pick.up.the.handset.
1) Dial.the.
1) Dial.the.number.
1) Pick.up.the.handset.
from.the.cradle.
number.
from.the.cradle.
ꢀ) Pick.up.the.corded.
handset.from.the.
base.
ꢀ) Dial.the.number.
ꢀ) Press.
.
ꢀ) Dial.the.number..
3) Press.TALK/FLASH.
3) Press.
.
1) Pick.up.the.handset..
(If.AutoTalk.is.on,.the.
phone.will.answer.when.
you.pick.up.the.handset.
from.the.cradle.)
1) Pick.up.the.handset..
ꢀ) Press.
Answering
a call
Pick.up.the.corded.
handset.from.the.base.
Press.
Press.
.
.
.
ꢀ) Press.TALK/FLASH..(If.
Any.Key.Answer.is.on,.
you.can.also.press.any.
key.on.the.dial.pad.)
Return.the.corded.
handset.to.the.base.
cradle.
Hanging
up
Press.END.or.return.the.handset.to.the.cradle.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from the Phonebook
1) With.the.phone.in.standby,.press. .to.open.the.phonebook.
3) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.
base.to.dial.the.number.
Note:. You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.
.on.the.base.before.you.open.the.phonebook..Find.the.phone.number.you.want.to.dial,.and.then.press.
MENU/SELECT.
Chain dialing from the phonebook
If.you.often.have.to.enter.a.series.of.digits.or.a.code.number.during.a.call,.you.can.save.that.code.number.to.a.
phonebook.entry..When.your.call.connects,.just.use.the.phonebook.to.transmit.the.saved.code.number..(This.is.
referred.to.as.chain.dialing.).
1) Enter.the.code.number.(up.to.twenty.digits).into.the.phonebook.(see.Creating.Phonebook.Entries.on.page.ꢀ5)..
Be.sure.to.enter.the.code.number.into.the.phonebook.exactly.as.you.would.enter.it.during.a.call..
ꢀ) During.a.call,.when.you.hear.the.prompt.that.tells.you.to.enter.the.code.number,.press.
.
3) Use. .or. .to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.
4) Press.MENU/SELECT..The.phone.sends.the.digits.of.the.code.number.exactly.as.you.saved.them.in.the.
phonebook.entry.
Switching to the Speakerphone During a Call
Handset:.To.switch.a.normal.call.to.the.handset.speakerphone,.press. ..To.switch.from.a.handset.speakerphone.
call.to.a.normal.call,.press.
.
Base:.To.switch.a.call.from.the.corded.handset.to.the.base.speakerphone,.press. .and.then.return.the.corded.
handset.to.the.cradle..To.switch.a.call.from.the.base.speakerphone.to.the.corded.handset,.simply.pick.up.the.corded.
handset.from.the.cradle.
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Caller ID, Call Waiting, and Redial Lists
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.
Using the Caller ID List
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.station..Caller.ID.records.
are.stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.
record.will.be.automatically.deleted.when.a.new.call.is.received..When.you.
have.new.Caller.ID.records.(that.is,.records.you.have.not.reviewed.yet).and.
the.phone.is.in.standby,.the.station.will.display.the.number.of.new.Caller.ID.
To.open.the.Caller.ID.list,.press.
.(on.the.right.side.of.the.four-way.key)..The.phone.will.show.the.latest.record..
Use. .and. to.scroll.through.the.list..(New.records.have.an.asterisk.next.to.the.received.time.)
Making a Call from a Caller ID Record
1) With.the.phone.in.standby,.press.
.to.open.the.Caller.ID.list.
ꢀ) Use. .and.
to find the Caller ID record you want to dial.
3) If.you.need.to.add.(or.delete).a.“1”.to.the.beginning.of.the.displayed.phone.number,.press. /ToNE..
4) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.
base.to.dial.the.number.
Note:. You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press.
.on.the.base.before.you.open.the.caller.ID.list..Find.the.phone.number.you.want.to.dial,.and.then.press.
MENU/SELECT.
What’s.this.“add.or.delete.a.1”.about?
• Any.phone.number.in.the.Caller.ID.records.might.(or.might.not!).have.a.“1”.at.the.front,.depending.on.how.
different.phone.companies.send.the.Caller.ID.information..
• The.phone.dials.the.number.exactly.as.it.appears.in.the.Caller.ID.record..
• If.the.phone.number.is.a.long.distance.or.toll.call,.but.the.Caller.ID.record.does.not.have.a.“1”.in.front.of.the.
number,.press. /ToNE.to.add.it..If.the.phone.number.is.a.local.or.non-toll.call,.but.the.Caller.ID.record.has.a.
“1”.in.front.of.the.number,.press. /ToNE.to.delete.it.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Seven-digit dialing
If.you.can.make.a.local.call.by.dialing.only.seven.digits.instead.of.ten,.you.can.tell.the.phone.to.hide.your.local.area.
code.in.the.Caller.ID.list;.any.calls.from.outside.your.area.code.will.show.all.ten.digits..This.setting.applies.to.the.
base.and.all.handsets.currently.connected.to.the.same.base.
To.program.your.local.area.code:
1) Press.MENU/SELECT..
ꢀ) Select.the.Global Setup.menu,.and.then.the.Area Code.submenu.
3) Use.the.number.keypad.(0.through.9).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.stored,.
it.appears.in.the.display..Press.CLEAr/INT’CoM.on.the.handset.or.CLEAr.on.the.base.to.delete.the.stored.
code,.and.then.enter.a.new.one.
4) Press.MENU/SELECT. You will hear a confirmation tone.
• The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area
code.to.the.code.programmed.on.the.phone..If.the.two.codes.match,.the.station.hides.the.area.code.in.the.Caller.
ID.list.
• When.you.are.reviewing.the.Caller.ID.list,.you.can.show.the.hidden.area.code.by.pressing.#..Press.#.again.to.
hide.the.area.code..
• When.you.dial.from.a.Caller.ID.record.or.store.a.Caller.ID.record.in.the.phonebook,.the.phone.dials.or.stores.the.
digits.exactly.as.they.appear.on.the.display..If.you.need.to.use.ten.digits,.be.sure.to.press.#.to.show.the.area.
code.before.you.dial.or.store.the.number..(See.page.ꢀ7.to.store.a.Caller.ID.record.in.the.phonebook.)
Deleting Caller ID Numbers
To.delete.only.one.Caller.ID.number,.press.
delete..Press.MENU/SELECT.and.select.Delete Entry. When the phone asks you to confirm, select Yes.
To.delete.all.the.Caller.ID.numbers,.press. .when.the.phone.is.in.standby..Press.MENU/SELECT.and.select.
when the phone is in standby, and then find the number you want to
Delete All. When the phone asks you to confirm, select Yes.
Notes:.•.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
.
•.Caller.ID.numbers.are.stored.separately.in.each.station..Deleting.a.record.from.one.station.will.not.delete.
the.record.from.any.other.stations.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.
phone,.a.call.waiting.tone.will.sound..If.you.also.have.Caller.ID.service,.the.phone.
shows.the.Caller.ID.information.for.the.incoming.call..Press.TALK/FLASH.on.the.
handset.or.FLASH.on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.
then.you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.TALK/FLASH.
on.the.handset.or.FLASH.on.the.base.
Note:.. You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each station.
1) With.the.phone.in.standby,.press.the.rEDIAL/PAUSE.to.open.the.redial.list.
ꢀ) Use. .and. .or.rEDIAL/PAUSE.to.scroll.through.the.redial.list.
3) When you find the number you want to dial, press TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press. .on.the.base.
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
.
•.If.the.redial.memory.is.empty,.Empty.appears.in.the.display.and.you.will.hear.a.beep.
•.You.can.also.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.
press. .on.the.base.before.you.open.the.redial.list..Find.the.phone.number.you.want.to.dial,.and.then.
press.MENU/SELECT.
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
1) With.the.phone.in.standby,.press.rEDIAL/PAUSE.
ꢀ) Use. .and. .to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press MENU/SELECT.and.select.Delete Entry.
4) When the phone asks you to confirm, select Yes..The.redial.number.is.deleted.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).
separately.on.each.handset.or.the.base.
1) With.the.phone.in.standby,.press. .or. ..The.display.shows.the.current.
volume.level.and.the.station.sounds.the.ringer.at.that.level..
ꢀ) Use. .to.make.the.ringer.volume.louder.or. .to.make.it.softer.or.turn.it.
completely.off.
3) When.you.hear.the.ringer.volume.level.you.want.to.use,.stop.pressing.keys..
The.station.will.use.the.new.ringer.volume.starting.with.the.next.incoming.call.
Note:. If.you.set.the.ringer.volume.to.Off,.the.station.won’t.ring..Other.stations.will.ring.according.to.their.individual.
settings.
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press. /MUTE.or.END.on.the.handset,.or.MUTE.or. .on.the.base.to.mute.the.ringer.
for.this.call..The.phone.will.ring.again.on.the.next.call..(The.cordless.handset.must.be.off.the.cradle.to.mute.the.
ringer.)
Adjusting the Earpiece Volume
You.can.choose.from.six.volume.levels.for.each.cordless.handset.earpiece.or.the.corded.handset.earpiece..To.
adjust.the.earpiece.volume.while.on.a.call,.press. .(to.make.it.louder).or. .(to.make.it.softer)..The.display.shows.
the.current.volume.level.for.the.earpiece.
Adjusting the Speaker Volume
Handset Speaker:.You.can.choose.from.six.volume.levels.for.the.handset.speaker.while.on.a.speakerphone.call.or.
when.the.handset.is.accessing.the.answering.system..To.adjust.the.handset.speaker.volume,.press. .(to.make.it.
louder).or. .(to.make.it.softer)..The.handset.display.shows.the.current.volume.level.for.the.handset.speaker.
Note:. The.handset.earpiece.and.the.handset.speaker.have.separate.volume.settings.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Speaker:.You.can.choose.from.ten.volume.levels.for.the.base.speaker.while.on.a.speakerphone.call.or.when.
the.answering.system.announces.or.plays.a.message..To.adjust.the.base.speaker.volume,.press. .(to.make.it.
louder).or. .(to.make.it.softer)..The.base.display.shows.the.current.volume.level.for.the.base.speaker.
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.cordless.handset.earpiece,.not.the.
speakerphone.and.the.base.corded.handset.
To.adjust.the.audio.tone:
1) While.on.a.call,.press.MENU/SELECT.
ꢀ) Move.the.cursor.to.select.Audio Tone,.and.then.press.MENU/SELECT.
3) Move.the.cursor.to.select.desired.option.(High Tone,.Natural Tone,.or.Low Tone),.and.then.press.MENU/
SELECT..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.
Activating T-Coil Mode
Digital.cordless.phones.generate.magnetic.signals.that.can.cause.noise.on.hearing.aids.equipped.with.a.telecoil.
(“T”.coil).feature..This.phone.includes.a.special.“T-coil”.mode.that,.when.activated,.reduces.the.magnetic.noise.
generated.by.the.cordless.handset.
1) With.the.phone.in.standby,.press.MENU/SELECT.
ꢀ) Select.the.Handset Setup.menu,.and.then.the.T-coil.submenu.
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
When.the.T-coil.mode.is.turned.on,. .appears.in.the.display.during.a.call.
Note:.. Using.the.T-coil.mode.may.shorten.the.handset.battery’s.talk.time;.make.sure.you.always.return.the.handset.
to.the.charging.cradle.when.not.in.use..Only.activate.T-coil.mode.if.you.experience.problems.using.the.
handset.with.a.T-coil-equipped.hearing.aid.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding a Lost Handset
To.locate.a.misplaced.handset,.press.FIND/HoLD/INT’CoM.on.the.base.when.the.phone.is.in.standby..Use.
or. .to.select.the.handset.you.want.to.page,.and.then.press.MENU/SELECT..Select.All.to.page.all.registered.
handsets..To.cancel.paging,.press.FIND/HoLD/INT’CoM.on.the.base.again.
.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
1) During.a.call,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.to.place.the.caller.
on.hold..If.you.leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.Line On Hold.
ꢀ) To.return.to.the.party.on.hold,.press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.handset.from.the.
base.or.press. .on.the.base..The.phone.will.return.to.the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Call.Waiting.and.CID.on.Call.Waiting.do.not.work..
Conferencing
Outside call
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.in.a.
conference.call..A.four-way.conference.call.consists.of.an.outside.line,.two.
handsets,.and.the.base..You.can.easily.join.a.call.already.in.progress..The.
Handset #2
1) Press.TALK/FLASH.or. .on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press. .on.the.base.to.join.the.call.
ꢀ) To.hang.up,.return.the.handset.to.the.cradle.or.press.END.on.the.
handset.or.return.the.corded.handset.to.the.base.or.press. .on.the.
base..The.other.party.will.still.be.connected.to.the.call.
Base
speakerphone
Handset #1
or corded handset
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You.can.transfer.a.call.from.one.station.to.another..The.handsets.must.be.currently.connected.to.the.same.base.(see.
1) During.a.call,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.
ꢀ) Use. .or. .to.select.the.station.you.want.to.transfer.the.call.to,.and.then.press.MENU/SELECT..Select.All.to.
page.all.other.stations..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.
transfer,.press.TALK/FLASH.or. .on.the.handset.or. .on.the.base.
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,.press.
TALK/FLASH.or. .again.on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press. .on.the.
base.again.
Answering a transferred call
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone;.stations.also.show.the.ID.of.the.station.that.is.
paging..To.accept.the.call.transfer:
1) To.answer.the.page.and.speak.to.the.transferring.station,.press.TALK/FLASH.or.CLEAr/INT’CoM.on.the.
handset,.or. .or.FIND/HoLD/INT’CoM.on.the.base,.or.pick.up.the.corded.handset.from.the.base.
Note:. If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
ꢀ) To.accept.the.call.and.speak.to.the.caller,.press.TALK/FLASH on.the.receiving.handset,.or. .on.the.receiving.
base.
3) When.you.accept.the.transferred.call,.the.transferring.station.will.be.disconnected.
Only the first station.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Special Features
Privacy Mode
Privacy.mode.prevents.other.stations.(that.are.connected.to.the.same.base).from.interrupting.your.call..As.long.as.
your.station.is.in.privacy.mode,.other.stations.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.
show.Unavailable.
1) While.on.a.call,.press.MENU/SELECT.
ꢀ) Select.Call Privacy..Privacy Mode On.appears.in.the.display.for.two.seconds;. .appears.and.remains.in.the.
display.until.the.feature.is.turned.off.
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..Privacy Mode Off.appears.
Note:.Privacy.mode.does.not.affect.handsets.that.are.connected.to.a.different.base.or.extension.phone.
Using the Intercom
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..The.handsets.must.be.currently.
Making an intercom page
1) With.the.phone.in.standby,.press.CLEAr/INT’CoM.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.
ꢀ) Use. .or. .to.select.the.station.you.want.to.talk.with,.and.then.press.MENU/SELECT..Select.All.to.page.all.
other.stations.
3) To.cancel.the.intercom.page,.press.END.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base.
Notes:.Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:
• You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.station.
• You.do.not.select.a.station.within.thirty.seconds.
• Your.handset.is.out.of.range.(Out Of Range.appears.in.the.display).
• The.party.does.not.answer.the.page.within.one.minute.
• The.party.is.busy.
• The.party.is.out.of.range.(Unavailable.appears.in.the.display).
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering an intercom page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.paging.
1) Press.TALK/FLASH.or.CLEAr/INT’CoM.on.the.handset,.or. .or.FIND/HoLD/INT’CoM.on.the.base,.or.pick.
up.the.corded.handset.from.the.base.
Note:..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
ꢀ) To.hang.up.an.intercom.call,.press.END.on.the.handset.or.FIND/HoLD/INT’CoM.on.the.base,.or.return.the.
corded.handset.to.the.base.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
1) Press. /MUTE.on.the.handset.or.MUTE.on.the.base..Mute On.and. .appear.in.the.display;. .remains.while.
muting.is.on.
ꢀ) To.cancel.muting,.press. /MUTE.on.the.handset.or.MUTE.on.the.base.again..Mute Off.appears..(While.on.a.
base.speakerphone.call,.pressing. .on.the.base.is.also.available.to.cancel.muting.)
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press /ToNE.
on.the.station..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.dial.mode.on.page.1ꢀ.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Voice Mail Service
If.you.subscribe.to.a.voice.mail.service,.you.can.use.your.phone.to.access.your.voice.mailbox..When.there.are.
messages.waiting.in.your.voice.mailbox,.the.new message LED on the handset flashes, and .appears.in.both.the.
handset.and.base.displays.
Note: This notification feature supports the voice mail service that uses Frequency Shift Keying (FSK) for the
message notification signal only.
If.you.store.your.access.number.and.password.(provided.by.the.voice.mail.service.you.subscribe.to).in.your.
Resetting the voice message waiting indicator
When.you.receive.a.new.voice.mail.message,.the.new message LED on the top of the handset flashes and ..
appears.in.the.handset.display..In.the.event.your.message.waiting.light.gets.out.of.sync.with.your.phone.company’s.
voice.messaging.system,.you.can.manually.reset.it.back.to.the.“No.messages.waiting”.state.
1) On.the.base,.press.MENU/SELECT..
ꢀ) Select.the.Global Setup.menu,.and.then.the.VMWI Reset.submenu.
3) Move.the.cursor.to.select.Yes.or.No.
4) Press.MENU/SELECT. You will hear a confirmation tone.
4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Answering System
You.can.set.up.your.answering.system’s.features.from.the.base.or.handset.with.two.exceptions:.you.can.only.
change.the.greeting.or.record.a.new.greeting.from.the.base..Only.one.station.at.a.time.can.access.the.answering.
system.menus.
Recording a Personal Greeting
Your.answering.system.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.
call:.“Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.”.You.can.record.your.own.
personal.outgoing.greeting..Your.recorded.greeting.must.be.between.two.seconds.and.thirty.seconds.long.
1) On.the.base,.press.MENU/SELECT..
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Record Greeting.submenu.
3) Record Greeting,.Start [select].appears..Press.MENU/SELECT.to.start.the.recording..Begin.recording.after.the.
announcement..The.message counter.on.the.base.LCD.displays.“30”,.and.then.begins.to.count.down.
4) When you finish recording, press MENU/SELECT.again.or.press. . You will hear a confirmation tone, and
your.recorded.greeting.plays.back.for.you.
Selecting a Greeting
You.can.switch.back.and.forth.between.the.pre-recorded.greeting.and.your.own.greeting.at.any.time.
1) On.the.base,.press.MENU/SELECT..
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Greeting.Options.submenu..The.system.plays.the.current.greeting.
3) To.keep.this.greeting,.do.nothing..To.switch.to.the.other.greeting,.press. .or. .on.the.four-way.function.key.
while.the.system.is.playing.the.current.greeting.
4) Each.time.you.press. .or. ,.the.system.switches.between.the.pre-recorded.and.the.personal.greeting..The.
last.greeting.you.hear.is.used.as.the.current.greeting.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Your Personal Greeting
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.
1) On.the.base,.press.MENU/SELECT..
ꢀ) Select.the.Ans..Setup.menu,.and.then.the.Greeting.Options.submenu..The.system.plays.the.current.greeting.
3) While.the.personal.greeting.is.playing,.press.
.
4) The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.
Selecting the Language for Announcements
You.can.select.the.language.of.your.answering.system.announcements..The.default.system.language.is.English.
1) Press.MENU/SELECT..
ꢀ) Select.Ans. Setup,.and.then.the.Ans. Language.submenu.
3) Move.the.cursor.to.choose.a.language..
for US models:..
Choose.English.or.Español.(Spanish)..
for Canadian models:..Choose.English.or.Français.(French).
4) Press.MENU/SELECT. You will hear a confirmation tone.
Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.(ꢀ,.4,.or.6).the.caller.hears.before.your.answering.system.
picks.up..If.you.select.Toll Saver,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.
four.rings.if.there.are.none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.
after.the.third.ring.to.avoid.long.distance.billing.charges.
1) Press.MENU/SELECT..
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Ring Time.submenu.
3) Move.the.cursor.to.select.a.ring.time.(Toll Saver,.2.Times,.4.Times,.or.6.Times).
4) Press.MENU/SELECT. You will hear a confirmation tone.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Record Time (or Announce only)
You.can.choose.how.many.minutes.(1.or.4).callers.have.to.record.a.message..If.you.select.Announce Only,.the.
answering.system.answers.the.call.but.prevents.callers.from.leaving.a.message.
1) Press.MENU/SELECT..
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Record Time.submenu.
3) Move.the.cursor.to.select.a.record.time.(1 Minute,.4.Minutes,.or.Announce Only).
4) Press.MENU/SELECT. You will hear a confirmation tone.
While.your.answering.system.is.set.to.Announce Only,.the.message counter.on.the.base.LCD.displays.“A.”.If.you.
are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.is.
available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.that.
greeting.
Activating the Message Alert
The message alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.
To.turn.on.the.message.alert:
1) Press.MENU/SELECT..
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Message Alert.submenu.
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
Activating the Base Call Screen
With.the.call.screen.feature,.you.can.listen.to.callers.as.they.leave.a.message.without.answering.the.call.
1) Press.MENU/SELECT..
ꢀ) Select.the.Ans. Setup.menu.and.then.the.Call Screen.submenu.
3) Move.the.cursor.to.select.On.or.Off.
4) Press.MENU/SELECT. You will hear a confirmation tone.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Answering System
Turning Your Answering System On and Off
From the base
From the handset
1) Press.MENU/SELECT..
1) With.the.phone.in.standby,.press..
ANSWEr oN/oFF.
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.
ꢀ) The.system.announces.“Answering.System.
Ans. On/Off.submenu.
Turning.On
is.on”.and.plays.the.current.greeting.
3) Move.the.cursor.to.select.On.
3) Answering System On.appears.on.the.base.
4) Press.MENU/SELECT..You.will.hear.a.
display.
confirmation tone.
1) With.the.phone.in.standby,.press..
1) Press.MENU/SELECT..
ANSWEr oN/oFF.
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.
ꢀ) The.phone.announces.“Answering.System.
Ans. On/Off.submenu.
Turning.Off
is.off.”
3) Move.the.cursor.to.select.Off.
3) Answering System Off.appears.on.the.base.
4) Press.MENU/SELECT..You.will.hear.a.
display.
confirmation tone.
Notes:.•.If.the.answering.system.announces.“No.remaining.time”.when.you.turn.it.on,.the.memory.is.full.(the.
message counter.on.the.base.LCD.also.shows.FL)..The.answering.system.can’t.record.any.new.messages.
until.you.delete.some.of.the.saved.ones.
.
•.If.you.do.not.set.the.clock,.your.messages.may.not.have.the.correct.day.and.time.stamp..To.set.the.clock,.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation from the Handset
You.can.operate.your.answering.system.from.the.handset.whenever.the.phone.is.in.standby.
• Press. /MUTE.to.start.remote.operation.
Command
1:Repeat
Use it to
• During.remote.operation,.the.phone.beeps.to.let.you.
know.it’s.waiting.for.your.next.command.
Repeat a message
Play messages
2:Play
• Press.the.number.listed.next.to.the.commands..(see.the.
table.for.a.list.of.all.available.commands)..
3:Skip
Skip a message
• Use.the.left.and.right.keys.to.scroll.through.the.
commands.(see.the.table.for.a.list.of.all.available.
commands),.and.press.MENU/SELECT..You.can.also.
press.the.number.listed.next.to.the.commands.instead.of.
scrolling.through.them.
4:Delete
Delete a message
Stop the current operation
Choose a greeting
Record a new greeting
5:Stop
6:SelectGreeting
8:RecNewGreeting
• When you’re finished, press END.or.just.hang.up.
• If.you.don’t.press.any.keys.for.thirty.seconds,.the.phone.
will.return.to.standby.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Messages
The.message counter.on.the.base.LCD.displays.the.number.of.messages.stored.in.memory..When.you.have.new.
messages.(that.you.have.not.listened.to.yet),.
.on.the.base.and.the.new message LED on the handset flash.
The answering system plays your new messages first. If you have no new messages, the system plays your old
messages..You.can.review.your.messages.from.the.base.or.from.the.handset:
From the base
From the handset
Press. /MUTE..The.system.announces.the.
number.of.new.and.old.messages,.then.plays.the.
first new message followed by the day and time
it.was.received..Then.the.system.plays.the.new.
messages.in.the.order.they.were.received..
Press.
..The.system.announces.the.number.
of new and old messages, then plays the first
new.message.followed.by.the.day.and.time.it.
was.received..Then.the.system.plays.the.new.
messages.in.the.order.they.were.received.
Playing.new.
messages
Press
current.message..Press.
back.to.a.previous.message..
.once.to.go.to.the.beginning.of.the.
Press.1.once.to.go.to.the.beginning.of.the.current.
message..Press.1.repeatedly.to.go.back.to.a.
previous.message.
Repeating
a.message
.repeatedly.to.go.
Skipping
a.message message..
Press. .to.go.to.the.beginning.of.the.next.
Press.3.to.go.to.the.beginning.of.the.next.
message.
Deleting
While.a.message.is.playing,.press. ...
While.a.message.is.playing,.press.4.
The.message.is.permanently.deleted..
a.message The.message.is.permanently.deleted..
While.the.phone.is.in.standby,.press. ..When.
Deleting.all.
messages
the system asks you to confirm, press
.
Not.available.
again..All.messages.are.permanently.deleted.
Playing.old. After.you.listen.to.your.new.messages,.press.. After.you.listen.to.your.new.messages,.press..
messages
.again.to.play.your.old.messages.
/MUTE.again.to.play.your.old.messages.
Ending.the.
message.
review
Press.5.to.stop.the.message.playback.
Press.END.to.exit.the.system.and.return.to.standby,.
or.press.2.to.restart.the.message.playback.
Press.
return.to.standby..
.to.stop.the.message.playback.and.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Screening Calls
From the base
From the handset
• While.the.system.is.taking.the.message,.simply.
listen.to.the.caller.over.the.base.speaker..(You.
need.to.activate.the.base.call.screen.feature.in.
• While.the.systems.is.recording.the.message,.press..
/MUTE..If.another.handset.is.screening.a.call,.you.will.
hear.a.beep.and.you.will.not.be.able.to.screen.the.call.
• To.answer.the.call.and.speak.to.the.caller,.press.TALK/
FLASH.
• To.answer.the.call.and.speak.to.the.caller,.pick.up.
the.corded.handset.from.the.base.or.press.
• To.mute.the.call.screen.and.allow.the.caller.to.
.
• To.mute.the.call.screen.and.allow.the.caller.to.continue.
leaving.the.message,.press.END.or.return.the.handset.
to.the.cradle.
continue.leaving.the.message,.press.
.
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
Operating the Answering System While You Are Away from Home
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.
Setting a security code or Personal Identification Number (PIN)
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.
Personal Identification Number (PIN). The default security code is 80.
1) Press.MENU/SELECT..
ꢀ) Select.the.Ans. Setup.menu,.and.then.the.Security Code.submenu.
3) Use.the.number.keypad.(0.through.9).to.enter.a.two-digit.security.code.(01-99).
4) Press.MENU/SELECT. You will hear a confirmation tone.
Dialing in to your answering system
Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.
return.to.standby.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:
1) Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.
about.ten.rings.and.sounds.a.series.of.beeps.
ꢀ) During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.0.and.enter.your.security.code/PIN.within.
two.seconds.
3) The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
4) Enter a remote command from the chart below. You have fifteen seconds to enter the first command; after the
first command, you have two seconds to enter each command.
If you want to
Press
If you want to
Press
0.then.2.
The.answering.system.plays.back.
messages.for.four.minutes,.then.
waits.for.another.command..To.
continue.playing.your.messages,.
press.0.then.2.again.
Play.incoming.
messages
Stop.the.current.operation.to.
enter.a.different.command.
0.then.5
0.then.1 (after the first four
seconds.of.this.message)
Repeat.this.message.
Turn.the.answering.system.off
Turn.the.answering.system.on
0.then.9
Go.back.to.the.
previous.message
0.then.1 during the first four
seconds.of.a.message.
0.then.6
Skip.this.message
0.then.3
Listen.to.the.help.prompts
Exit.the.system
1.then.0
Delete.this.message 0.then.4
Hang.up.
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within fifteen seconds.
6) Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.telephone.wall.plate.
Snap the stand
into the notches
marked WALL
on the bottom of
the base.
Remove the stand
from the base.
K
S
E
D
WALL
L
L
A
W
ALL
W
Connect the AC adapter and the
telephone cords as shown on pages
9 and 10. Remember to route the AC
adapter cord through the channel on
the bottom of the base.
Route the AC adapter cord
through the molded wiring
channel on the bottom of
the stand, and let the cord
hang below the stand.
Plug the telephone
cord into the wall
jack. Route the
telephone cord
through the
molded wiring
channel on the
bottom of the
(To AC outlet)
stand as shown.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Place the mounting slots over the
pins on the wall plate.
Wall plate
Slide the base
down to lock it
into place.
(To AC outlet)
On the base unit, pull the handset
retainer out of the slot.
Notes:.Mounting.the.phone.directly.on.the.wall
Rotate it clockwise 180 degrees and
flip the retainer from front to back.
Slide it back into the slot.
• Be.sure.the.wall.is.capable.of.supporting.the.weight.
of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material.
• Insert.two.#10.screws.(minimum.length.of.1.3/8.
inches,.not.supplied).into.the.wall,.3.15/16.inches.
apart..
The retainer holds the corded
handset in place.
• Leave.the.screw.heads.1/8.inch.away.from.the.wall.to.
allow.room.for.mounting.the.phone..
• Align.the.mounting.slots.over.the.screws.and.slide.
the.base.down.into.place.as.shown.above.
5ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
Operating temperature 3ꢀ°.F.to.1ꢀꢀ°.F.(0°.C.to.50°.C)
Base
Charging cradle
PS-0007
Part number
Input voltage
Output voltage
Part number
Capacity
PS-0008
AC adapter
1ꢀ0V.AC,.60.Hz
9V.DC.@.ꢀ10mA
BT-1015
1ꢀ0V.AC,.60.Hz
9V.DC.@.ꢀ10mA
Battery pack
650mAh,.ꢀ.4V.DC
Notes:
• Use.only.the.supplied.AC.adapters.
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.charging.cradles.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or
electrical.hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
Battery Information
Battery life
With.average.use,.your.handset.battery.provides.more.than.ten.hours.of.talk.time.and.approximately.seven.days.
of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.base.or.
charging.cradle.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.
if.the.handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.
handset.is.off.of.the.cradle.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Low battery alert
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.
order.to.save.power..When.Low Battery - Charge Handset.appears.in.the.handset.display.
and.the.phone.is.in.standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.
your.conversation.as.quickly.as.possible,.and.return.the.handset.to.the.cradle.
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Cleaning the charging contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.cradle.
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..
Doing so may discolor the surface of the telephone and damage the finish.
Contacts
Battery replacement and handling
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.please.
Caution:
• Use.only.battery.pack.BT-1015..
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
Power Failures
During.a.power.failure,.you.can.make.and.receive.calls.with.the.base.corded.handset;.however,.you.will.not.be.able.
to.use.the.base.speakerphone.or.the.cordless.handset..See.page.30.for.available.features.with.the.base.corded.
handset.during.a.power.failure.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your.problem,.please.call.our.Customer.Hotline.(see.the.back.cover.for.contact.information).
When you have this
Try...
problem...
The.charge.LED.won’t.
illuminate.when.the.cordless.
• Re-seating.the.handset.in.the.cradle..
handset.is.placed.in.the.
cradle.
• Checking.the.telephone.cord.connection..If.Check TEL Line.appears.on.the.base.
or.handset.display,.the.telephone.cord.may.not.be.connected.correctly.(see.page.
No.stations.can.make.or.
receive.calls..
• Disconnecting.the.base.AC.adapter..Wait.a.few.minutes,.then.reconnect.it.(see.
A.single.cordless.handset.
can’t.make.or.receive.calls.
(but.other.stations.can).
• Moving.the.handset.closer.to.the.base.
A.station.can.make.calls,.but.
it.doesn’t.ring.or.receive.a.
page.
• Charging.the.battery.for.15-ꢀ0.hours.
A.cordless.handset.is.not.
working.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
• Moving.the.handset.closer.to.the.base.
A.cordless.handset.says.
Unavailable.
The.phone.keeps.ringing.
when.I.answer.on.an.
extension.
• You.may.have.to.change.the.line.mode..Contact.customer.service.for.more.
• Making.sure.to.use.the.base.corded.handset.to.make.or.receive.a.call..
During.power.failure,.can't.
make.or.receive.a.call.
• Checking.to.see.if.the.call.was.placed.through.a.switchboard.
• Asking.your.telephone.company.to.verify.your.Caller.ID.service.is.current..There.
may.be.a.problem.with.your.Caller.ID.service.
No.stations.will.display.any.
Caller.ID.information.
• Letting.incoming.calls.ring.at.least.twice.before.answering.
Caller ID displays briefly and • You.may.have.to.change.the.line.mode..Contact.customer.service.for.more.
then.clears.
• Seeing.if.you.already.have.6.cordless.handsets.registered.to.this.base.
• Seeing.if.you.already.registered.this.handset.to.4.bases.
I.can’t.register.a.cordless.
handset.at.the.base.
A.cordless.handset.doesn’t.
communicate.with.other.
handsets..
• Making.sure.all.handsets.are.registered.to.and.currently.connected.to.the.same.
• Making.sure.all.handsets.are.registered.to.and.currently.connected.to.the.same.
I.can’t.transfer.calls.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
When you have this
problem...
Try...
• Checking.to.see.that.there.are.not.two.handsets.already.using.the.conference.
• Making.sure.both.handsets.are.registered.to.and.currently.connected.to.the.same.
I.can’t.get.two.cordless.
handsets.to.talk.to.an.
outside.caller.
not.work.
The.answering.system.does.
not.record.any.messages.
•
Checking.to.see.that.the.message.record.time.is.not.set.to.announce.only.(see.
.
The.answering.system.
doesn’t.say.what.time.
messages.were.recorded.
• The.incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
Messages.are.incomplete..
I.can’t.hear.base.or.handset.
speaker.during.call.screening.
or.message.playback.
I.can’t.access.answering.
system.from.a.remote.
phone..
• Checking.to.see.if.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Weak or Hard to Hear Audio
If.the.caller’s.voice.sounds.weak.or.soft,.the.signal.might.be.blocked.by.large.metal.objects.or.walls;.you.might.also.
be.too.far.from.the.base,.or.the.handset’s.battery.may.be.weak.
• Try.moving.around.while.you’re.on.a.call.or.moving.closer.to.the.base.to.see.if.the.sound.gets.louder.
• Make.sure.the.handset’s.battery.is.fully.charged.
Noise or Static on the Line
The.most.common.cause.of.noise.or.static.on.a.cordless.phone.is.interference:.other.wireless.or.electronic.devices.
can.radiate.energy.that.disturbs.the.radio.signal.between.the.base.and.the.handset.(much.like.overhead.power.lines.
can.cause.static.on.your.car.radio)..Some.common.household.sources.of.interference.are
• electrical.appliances,.especially.microwave.ovens.
• computer.equipment,.especially.wireless.LAN.equipment.and.DSL.modems
• radio-based.wireless.devices,.such.as.room.monitors,.wireless.controllers,.or.wireless.headphones.or.speakers
• large florescent light fixtures (particularly ones that give off a “buzzing” noise)
• other.services.that.use.your.phone.line,.like.alarm.systems,.intercom.systems,.or.broadband.Internet.service
For static on only one handset or in a specific location:
For.static.on.more.than.one.handset:
• Check.nearby.for.one.of.the.common.interference.
sources.
• Try.moving.the.handset.away.from.a.suspected.
• Check.near.the.base.for.the.source.of.interference.
• Try.moving.the.base.away.from.a.suspected.source,.
or.try.turning.off.the.source.if.possible.
source,.or.try.moving.the.suspected.source.so.it’s.not. • If.you.have.any.services.that.might.use.your.phone.
between.the.handset.and.the.base. line, see if you need a filter on the phone line.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a telephone line filter or DSL filter
Telephone
wall jack
Any.broadband.Internet.service.that.uses.your.telephone.
line.might.interfere.with.standard.phones..The.most.common.type.
of.these.services,.DSL,.often.causes.static.on.your.telephone..
Fortunately, an easy-to-install filter removes this static from the line.
Technicians who install DSL service usually leave several filters for
the customers; if you can’t find them, call your DSL provider or look
in.any.electronics.store.
Telephone
cord
DSL filter
Just plug the DSL filter into the telephone wall jack and then plug
your phone’s base into the filter. Make a test call to make sure the
noise.is.gone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
ꢀ) Press.and.hold.END.and.# for more than five seconds. Select Deregister HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.
4) The phone will ask you to confirm the deregistration. Select Yes..The.selected.handset.will.clear.its.registration.
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.Handset not registered-place handset on base to
register. See your Owner’s Manual for help.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
If.the.handset.cannot.contact.the.base,.it.will.display.Out Of Range..Make.sure.the.handset.is.in.range.of.the.base.
and.the.base.is.connected.to.power;.you.can.also.reset.the.handset.without.the.base.(see.the.next.section).
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
1) Press.and.hold.END.and.# for at least five seconds.
ꢀ) Move.the.cursor.to.select.Base Unavailable.and.then.press.MENU/SELECT.
3) Select.the.base.which.you.want.to.de-register.from,.and.then.press.MENU/SELECT..Base Unavailable.appears.
4) Move.the.cursor.to.select.Yes,.and.then.press.MENU/SELECT. You hear a confirmation tone, and the handset
deletes.its.own.base.information.without.contacting.the.base..If.the.handset.was.registered.to.only.one.base,.
it.displays.Handset not registered-place handset on base to register. See your Owner’s Manual for help..If.the.
handset.is.still.registered.to.another.base,.it.searches.for.the.other.base.and.then.returns.to.standby.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Line Mode for Multiple Extensions
Line.mode.refers.to.the.method.that.telephones.use.to.signal.each.other.that.an.extension.is.in.use..Customer.
service.may.recommend.changing.the.line.mode.if.you.have.any.of.the.following.problems:
• Your.phone.keeps.ringing.after.someone.answers.on.an.extension.phone.
• Your.answering.system.doesn’t.stop.recording.when.you.answer.on.an.extension.phone.
• Caller ID displays briefly and then clears.
1) If.you.set.from.a.handset.and.you.have.multiple.bases,.select.the.base.that.is.having.problems.(see.page.15).
ꢀ) Press.MENU/SELECT..
3) Select.the.Global Setup.menu,.and.then.the.Set Line Mode.submenu..
4) If Instructed by Customer Service Press [select].appears..Press.MENU/SELECT.
5) Move.the.cursor.to.select.Type - A,.Type - B,.or.Off.
6) Press.MENU/SELECT. You will hear a confirmation tone.
Traveling Out of Range
When.the.handset.is.in.standby,.the.handset.will.display.Out Of Range.
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.
base,.the.handset.will.beep,.display.Out Of Range,.and.then.go.to.standby..The.base.will.maintain.the.connection.
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.
thirty.seconds,.press.TALK/FLASH.or. .to.pick.up.the.call.again.
Note:.. If.it.is.set.to.automatically.select.the.available.base,.the.handset.will.begin.searching.for.another.base.thirty.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Liquid Damage
Moisture.and.liquid.can.damage.your.cordless.phone.
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.
the.liquid,.and.use.as.normal..
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below..After.following.these.steps,.if.
your.cordless.telephone.does.not.work,.please.call.our.Customer.Service.Hotline.(see.the.back.cover.page).
Handset
Base
1) Remove.the.battery.cover.and.leave.it.off.for.
1) Disconnect.the.AC.adapter.from.the.base,.cutting.
ventilation.
off.electrical.power.
ꢀ) Disconnect.the.battery.pack..Leave.the.battery.
cover.off.and.the.battery.pack.disconnected.for.at.
least.3.days.
ꢀ) Disconnect.the.telephone.cord.from.the.base.
3) Let.dry.for.at.least.3.days..
3) Once.the.handset.is.completely.dry,.reconnect.the.
battery.pack.and.the.battery.cover.
4) Recharge.the.handset’s.battery.pack.for.15.to.ꢀ0.
hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
6ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
Precautions!
Before.you.read.anything.else,.please.observe.the.following:
Warning!
•
Uniden.voluntarily.participates.in.an.RBRC®.
Uniden.America.Corporation.DOES.NOT.represent.this.unit.
to be waterproof. To reduce the risk of fire, electrical shock,
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.
moisture.
industry.program.to.collect.and.recycle.nickel-cadmium.
batteries.at.the.end.of.their.useful.life,.when.taken.out.of.
service.within.the.United.States..
•
•
The.RBRC®.program.provides.a.convenient.alternative.to.
placing.used.nickel-cadmium.batteries.into.the.trash.or.
municipal.waste.stream,.which.is.illegal.in.some.areas.
Through.the.RBRC®.program,.Uniden.makes.it.easy.
for.you.to.drop.off.the.used.battery.at.local.retailers.of.
replacement.nickel-cadmium.batteries..You.may.also.
contact.your.local.recycling.center.for.information.on.
where.to.return.the.used.battery...
Rechargeable Nickel-Cadmium Battery
Warning
•
•
•
This.equipment.contains.a.rechargeable.nickel-cadmium.
battery..
The.rechargeable.batteries.contained.in.this.equipment.
may explode if disposed of in a fire.
Nickel.and.Cadmium.are.a.chemical.known.to.state.of.
California.to.cause.cancer..
Please.call.1-800-8-BATTERY.for.information.on.Ni-Cd.
battery.recycling.in.your.area..Uniden’s.involvement.in.
this.program.is.part.of.its.commitment.to.protecting.our.
environment.and.conserving.natural.resources.
RBRC®.is.a.registered.trademark.of.the.Rechargeable.
Battery.Recycling.Corporation.
•
•
Do.not.short-circuit.the.battery..
Do.not.charge.the.rechargeable.battery.pack.used.in.
this.equipment.with.in.any.charger.other.than.the.one.
designed to charge this battery pack as specified in the
owner's.manual..Using.another.charger.may.damage.the.
battery.pack.or.cause.the.battery.pack.to.explode..
•
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.
in.our.products.and.accessories.
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.
Properly..
Warning!
The.cords.on.this.product.and/or.accessories.contain.lead,.a.
chemical.known.to.the.State.of.California.to.cause.birth.defects.
or.other.reproductive.harm..Wash.hands.after.handling.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The FCC Wants You To Know
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.
the.requirements.adopted.by.the.ACTA..On.the.bottom.of.this.
equipment.is.a.label.that.contains,.among.other.information,.a.
product identifier in the format US: AAAEQ##TXXXX. If requested,
this.number.must.be.provided.to.the.telephone.company.
When.using.your.telephone.equipment,.basic.safety.
precautions.should.always.be.followed.to.reduce.the.risk.
of fire, electric shock and injury to persons, including the
following:.
1. Do.not.use.this.product.near.water,.for.example,.near.
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
An applicable Universal Service Order Codes (USOC) certification
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJ11C).in.
the.packaging.with.each.piece.of.approved.terminal.equipment..
A.plug.and.jack.used.to.connect.this.equipment.to.the.premises.
wiring.and.telephone.network.must.comply.with.the.applicable.FCC.
Part.68.rules.and.requirements.adopted.by.the.ACTA..A.compliant.
telephone.cord.and.modular.plug.is.provided.with.this.product..It.is.
designed.to.be.connected.to.a.compatible.modular.jack.that.is.also.
compliant..See.installation.instructions.for.details.
ꢀ. Avoid.using.a.telephone.(other.than.a.cordless.type).
during.an.electrical.storm..There.may.be.a.remote.risk.
of.electric.shock.from.lightning..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.
vicinity.of.the.leak..
4. Use.only.the.power.cord.and.batteries.indicated.in.
this manual. Do not dispose of batteries in a fire. They
may.explode..Check.with.local.authorities.for.possible.
battery.disposal.instructions..
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.
call..In.most.but.not.all.areas,.the.sum.of.RENs.should.not.exceed.
five (5.0). To be certain of the number of devices that may be
connected.to.a.line,.as.determined.by.the.total.RENs,.contact.the.
telephone.provider..For.products.approved.after.July.ꢀ3,.ꢀ001,.the.
REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the
REN.without.a.decimal.point.(e.g.,.03.is.a.REN.of.0.3)..For.earlier.
products,.the.REN.is.separately.shown.on.the.label.
5. Do.not.disassemble.any.component.of.this.product.
SAVE THESE INSTRUCTIONS
CAUTION..
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..
Dispose.of.used.batteries.according.to.the.instructions..Do.not.
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.
shipping.this.product.
If.this.equipment.causes.harm.to.the.telephone.network,.the.
telephone.company.will.notify.you.in.advance.that.temporary.
discontinuance.of.service.may.be.required..But.if.advance.notice.
isn’t.practical,.the.telephone.company.will.notify.the.customer.as.
soon as possible. Also, you will be advised of your right to file a
complaint.with.the.FCC.if.you.believe.it.is.necessary..The.telephone.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
company.may.make.changes.in.its.facilities,.equipment,.operations.
or.procedures.that.could.affect.the.operation.of.the.equipment..If.
this.happens.the.telephone.company.will.provide.advance.notice.
in order for you to make necessary modifications to maintain
uninterrupted.service.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.
for.the.amount.of.radio.frequency.energy.various.products.may.
produce.depending.on.their.intended.usage..This.product.has.
been.tested.and.found.to.comply.with.the.FCC’s.exposure.criteria..
For.body.worn.operation,.the.FCC.RF.exposure.guidelines.were.
also.met.when.used.with.the.Uniden.accessories.supplied.or.
designed.for.this.product..Use.of.other.accessories.may.not.ensure.
compliance.with.FCC.RF.exposure.guidelines.and.should.be.
avoided.
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.
replacement.section);.otherwise.do.not.substitute.or.repair.any.
parts of the device except as specified in this manual. Connection
to.party.line.service.is.subject.to.state.tariffs..Contact.the.state.
public.utility.commission,.public.service.commission.or.corporation.
commission.for.information..This.equipment.is.hearing.aid.
compatible.
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.
a.separation.distance.of.at.least.ꢀ0.cm.from.all.persons.and.must.
not.be.collocated.or.operated.in.conjunction.with.any.other.antenna.
or.transmitter.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-ꢀ97-10ꢀ3..If.the.equipment.is.
causing.harm.to.the.telephone.network,.the.telephone.company.
may.request.that.you.disconnect.the.equipment.until.the.problem.is.
resolved..
If.your.home.has.wired.alarm.equipment.connected.to.a.phone.
line,.be.sure.that.installing.the.system.does.not.disable.your.alarm.
equipment..If.you.have.questions.about.what.will.disable.alarm.
equipment, contact your telephone company or a qualified installer.
NOTICE:.According.to.telephone.company.reports,.AC.electrical.
surges,.typically.resulting.from.lightning.strikes,.are.very.destructive.
to.telephone.equipment.connected.to.AC.power.sources..To.
minimize.damage.from.these.types.of.surges,.a.surge.arrestor.is.
recommended.
Note:.This.equipment.has.been.tested.and.found.to.comply.with.the.
limits.for.a.Class.B.digital.device,.pursuant.to.part.15.of.the.FCC.
Rules..These.limits.are.designed.to.provide.reasonable.protection.
against.harmful.interference.in.a.residential.installation..This.
equipment.generates,.uses.and.can.radiate.radio.frequency.energy.
and,.if.not.installed.and.used.in.accordance.with.the.instructions,.
may.cause.harmful.interference.to.radio.communications..However,.
there.is.no.guarantee.that.interference.will.not.occur.in.a.particular.
installation..If.this.equipment.does.cause.harmful.interference.to.
radio.or.television.reception,.which.can.be.determined.by.turning.
the.equipment.off.and.on,.the.user.is.encouraged.to.try.to.correct.
the.interference.by.one.or.more.of.the.following.measures:
Changes or modifications to this product not expressly approved
by.Uniden,.or.operation.of.this.product.in.any.way.other.than.as.
detailed.by.the.owner’s.manual,.could.void.your.authority.to.operate.
this.product.
This.device.complies.with.part.15.of.the.FCC.rules..Operation.
is.subject.to.the.following.two.conditions:.(1).This.device.may.
not.cause.harmful.interference,.and.(ꢀ).This.device.must.accept.
any.interference.received,.including.interference.that.may.cause.
undesired.operation..Privacy.of.communications.may.not.be.
ensured.when.using.this.phone.
--Reorient.or.relocate.the.receiving.antenna.
--Increase.the.separation.between.the.equipment.and.receiver.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
--Connect.the.equipment.into.an.outlet.on.a.circuit.different.from..
...that.to.which.the.receiver.is.connected.
I.C. Notice
Terminal equipment
--Consult.the.dealer.or.an.experienced.radio/TV.technician.for.help.
NOTICE:.This.equipment.meets.the.applicable.Industry.
Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed.based.on.a.Declaration.of.Conformity.indicating.that.
Industry Canada technical specifications were met. It does not
imply.that.Industry.Canada.approved.the.equipment.
Radio interference
Radio.interference.may.occasionally.cause.buzzing.and.humming.
in.your.cordless.handset,.or.clicking.noises.in.the.base..This.
interference.is.caused.by.external.sources.such.as.TV,.refrigerator,.
vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is
NOT.DEFECTIVE..If.these.noises.continue.and.are.too.distracting,.
please.check.around.your.home.to.see.what.appliances.may.be.
causing.the.problem..In.addition,.we.recommend.that.the.base.
not.be.plugged.into.a.circuit.that.also.powers.a.major.appliance.
because.of.the.potential.for.interference..In.the.unlikely.event.that.
you.consistently.hear.other.voices.or.distracting.transmissions.
on.your.phone,.you.may.be.receiving.radio.signals.from.another.
cordless.telephone.or.other.source.of.interference.
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.
assigned.to.each.terminal.equipment.provides.an.indication.
of.the.maximum.number.of.terminals.allowed.to.be.connected.
to.a.telephone.interface..The.termination.on.an.interface.may.
consist.of.any.combination.of.devices.subject.only.to.the.
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.
of all the devices does not exceed five.
Finally,.it.should.be.noted.that.some.cordless.telephones.operate.
at.frequencies.that.may.cause.interference.to.nearby.TVs.and.
VCRs..To.minimize.or.prevent.such.interference,.the.base.of.the.
cordless.telephone.should.not.be.placed.near.or.on.top.of.a.TV.or.
VCR..If.interference.is.experienced,.moving.the.cordless.telephone.
farther.away.from.the.TV.or.VCR.will.often.reduce.or.eliminate.the.
interference..
Radio equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
Cordless telephone privacy
Operation.is.subject.to.the.following.two.conditions:.(1).this.
device.may.not.cause.interference,.and.(ꢀ).this.device.must.
accept.any.interference,.including.interference.that.may.cause.
undesired.operation.of.the.device..“Privacy.of.communications.
may.not.be.ensured.when.using.this.telephone.”
Cordless.telephones.are.radio.devices..Communications.between.
the.handset.and.base.of.your.cordless.telephone.are.accomplished.
by.means.of.radio.waves.which.are.broadcast.over.the.open.
airways..Because.of.the.inherent.physical.properties.of.radio.
waves,.your.communications.can.be.received.by.radio.receiving.
devices.other.than.your.own..
cordless.telephone.unit..Consequently,.any.communications.using.
your.cordless.telephone.may.not.be.private.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing.Caller.ID.or.redial.
T
M
Mute
V
R
Redial
Ringer
W
N
O
S
P
Personal identification number .
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Operation Card
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Remote access
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
4. Press 0 then 6 to turn the
answering system on.
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
4. Press 0 then 6 to turn the
answering system on.
away from home
1. Call your phone number from a
1. Call your phone number from a
touch-tone phone.
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
CUT
CUT
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
Remote access
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
4. Press 0 then 6 to turn the
answering system on.
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop the
announcement.
4. Press 0 then 6 to turn the
answering system on.
away from home
away from home
1. Call your phone number from a
1. Call your phone number from a
touch-tone phone.
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts.
3. To quit, hang up the phone.
3. To quit, hang up the phone.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
C U T
C U T
Task
Key
Task
Key
Repeat a Message
Repeat a Message
Play Incoming Messages
Skip a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
C U T
C U T
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Key
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
70
Download from Www.Somanuals.com. All Manuals Search And Download.
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES..
One Year Limited Warranty
Important:.Evidence.of.original.purchase.is.required.for.
warranty.service..WARRANTOR:.UNIDEN.AMERICA.
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.1ꢀ.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or necessary, (B) modified, altered, or used as part of any
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E).used.in.any.
conjunction.with.equipment.or.parts.or.as.part.of.any.system.
not.manufactured.by.Uniden,.or.(F).installed.or.programmed.
by.anyone.other.than.as.detailed.by.the.owner’s.manual.for.
this.product..STATEMENT.OF.REMEDY:.In.the.event.that.the.
product.does.not.conform.to.this.warranty.at.any.time.while.this.
warranty.is.in.effect,.warrantor.will.either,.at.its.option,.repair.or.
replace.the.defective.unit.and.return.it.to.you.without.charge.for.
parts,.service,.or.any.other.cost.(except.shipping.and.handling).
incurred.by.warrantor.or.its.representatives.in.connection.with.
the.performance.of.this.warranty..Warrantor,.at.its.option,.may.
replace.the.unit.with.a.new.or.refurbished.unit..THE.LIMITED.
WARRANTY.SET.FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.
WARRANTY.PERTAINING.TO.THE.PRODUCT.AND.IS.IN.
LIEU.OF.AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.
ANY.NATURE.WHATSOEVER,.WHETHER.EXPRESS,.
IMPLIED.OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY.OR.FITNESS.FOR
Some.states.do.not.allow.this.exclusion.or.limitation.of.
incidental.or.consequential.damages.so.the.above.limitation.or.
exclusion.may.not.apply.to.you.
LEGAL REMEDIES: This warranty gives you specific legal
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.
in.its.original.packaging)..Disconnect.the.battery.from.the.
Product.and.separately.secure.the.battery.in.its.own.separate.
packaging.within.the.shipping.carton..The.Product.should.
include.all.parts.and.accessories.originally.packaged.with.the.
Product..Include.evidence.of.original.purchase.and.a.note.
describing.the.defect.that.has.caused.you.to.return.it..The.
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.
to.warrantor.at:.
Uniden America Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76155
71
Download from Www.Somanuals.com. All Manuals Search And Download.
VISIT OUR WEBSITE AT
WWW.UNIDEN.COM IF YOU...
• ...HAVE A QUESTION OR A PROBLEM.
Or call our Customer Hotline at 1-800-297-1023 during regular business hours.*
• ...ARE LOOKING FOR A PART OR ACCESSORY.
Or call our Parts Department at 1-800-554-3988 during regular business hours.*
• ...NEED SPECIAL ASSISTANCE DUE TO A DISABILITY.
Or call our Accessibility help line at 1-800-874-9314 (voice or TTY).
© 2008 Uniden America Corp.,
Fort Worth, Texas. Printed In China.
UCZZ01580EZ(0)
* Central Standard Time. Detailed
customer service hours are available
Download from Www.Somanuals.com. All Manuals Search And Download.
|