DCT756 &
DCT7565
Download from Www.Somanuals.com. All Manuals Search And Download.
Finding a Phonebook Entry ..................................27
Editing an Existing Phonebook Entry....................28
Redialing a Number..................................................37
Deleting a Redial record.............................................37
Storing Caller ID or Redial Numbers
in the Phonebook................................................28
Adjusting the Ringer, Handset Earpiece, and
Base Speaker Volume ..............................................37
Adjusting the Ringer Volume ................................37
Adjusting the Handset/Base Volume ....................38
Adjusting the Audio Tone and Clarity Boost..........38
Finding a Lost Handset............................................38
Using Hold, Conference, and Transfer...................39
Placing a Call on Hold ..........................................39
Conferencing ........................................................39
Transferring a Call ................................................40
Answering a Transferred Call ...............................40
Using Special Features............................................41
Do Not Disturb (All Calls) (DCT7565 Only)...........41
Muting the Ringer (One Call Only)........................41
Muting the Handset Microphone...........................41
Muting the Base Microphone (DCT7565 only)......41
Privacy Mode........................................................41
Seven-Digit Dialing...................................................42
Using the DirectLink Feature...................................42
Making a DirectLink Call.......................................43
Exiting DirectLink Operation .................................43
Making an Intercom Page........................................43
Deleting Phonebook Entries .................................28
Deleting All the Phonebook
Entries at Once................................................29
Copying Phonebook Entries
to Another Handset...............................................29
Customizing Your Phone.........................................30
Changing the Handset Banner .............................30
Selecting Ring Tones (Handset Only)...................31
Activating AutoTalk (Handset only) .......................32
Activating Any Key Answer (Handset only)...........32
Using Your Phone.....................................................33
Making a Call from the Phonebook.......................34
Making a Call with Speed Dial and with
Base Speed Dial (DCT7565 Only)......................34
Switching to the Handset
Speakerphone During a Call ........................34
Using Caller ID, Call Waiting.................................34
Using the Caller ID List.........................................35
Making a Call from a Caller ID Record .................35
Deleting Caller ID Numbers..................................35
Using Call Waiting and Call Waiting Deluxe .........35
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering An Intercom Page ...............................44
Room/Baby Monitor .................................................44
Tone Dialing Switch Over ........................................45
Installing the Optional Headset...............................45
Maintenance..............................................................46
Battery Replacement and Handling......................46
Battery Contact Maintenance ..........................46
Low Battery Alert...................................................47
Talk Time, Standby Time, and
Storing the Handset on the Base..........................47
Troubleshooting .......................................................47
Resetting the Handset...........................................47
Resetting the Handset without the Base ...............48
Changing the Digital Security Code.......................49
Traveling Out of Range..........................................49
Common Issues........................................................49
Liquid Damage..........................................................51
Rechargeable Nickel-Metal-Hydride
Battery Warning.............................................52
The FCC Wants You To Know ...............................54
I.C. Notice..................................................................55
One Year Limited Warranty......................................56
Index..........................................................................57
Specifications...........................................................58
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you for purchasing a Uniden Multi-Handset phone.
Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manu-
al may differ from the actual unit.
As an Energy Star® Partner, Uniden has determined that this product or product models meets the
Energy Star® guidelines for energy efficiency. Energy Star®; is a U.S. registered mark.
Uniden is a registered trademark of Uniden America Corporation. AutoStandby, DirectLink, Integri-
Sound and Random Code are trademarks of Uniden America.
Accessibility
Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer
service assistance or if you have any questions about how Uniden’s products can accommodate persons with dis-
abilities, please call the accessibility voice/TTY line: 1-800-874-9314
A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a message,
link.
Terminology used in this Manual
Base
The main part of the phone that connects to your phone line and lets you make and receive calls.
Caller ID is available from your telephone provider. With this service, you can see the name and
number of incoming callers.
CID
CID Deluxe
Caller ID on Call Waiting Deluxe features are offered by your telephone provider. This service
or Call Wait- gives you different options when you have a waiting call. See Using Call Waiting and Call Waiting
ing Deluxe
Deluxe on page 35.
CID/CW or
CIDCW
Caller ID on Call Waiting is available from your telephone provider. With this service, you can see
incoming caller information while on another call.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
A cradle that comes with an accessory handset and charges the handset battery. It connects to
power but does not connect to a phone line.
Charger
DirectLink
If you have accessory handsets on your system, you can use two handsets as 2-way radios.
Extra or
Accessory
Handset
This phone system is expandable and will support a total of four handsets to one base. The extra,
or accessory handset, is a handset that is compatible with this model.
Apply to registered handsets and the base. If you change something under the global menu, you
change it for all handsets and the base. Only one handset can change global settings at a time,
and the phone must be in standby.
Global
Settings
Standby
Station
Talk
The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present.
Any handset or the base.
A telephone line has been activated on the handset or the base, enabling a dial tone.
Product Overview
DCT7565/DCT756 Features:
• 2.4GHz Digital Expandable System
• Expands up to 4 Handsets
• Caller ID/Call Waiting Deluxe
• Base Keypad (DCT7565 model only)
• 100 shared Phonebook Entries/Caller ID Numbers
• DirectLink™
• Room/Baby Monitoring
• 20 Ringer Options (10 Tones/10 Melodies)
• Personalized Ring by Party
• 10 Speed Dial Locations
• Last 3 Number Redial
• Copy Phonebook Entries to Another Handset
• Trilingual Menu Displays (English, Spanish,
and French)
• Call Transfer
• Conferencing
• Intercom
• Handset Speakerphone
• Base Speakerphone (DCT7565 Model only)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DCT756 and DCT7565 - Parts of the Handset
1.Handset Antenna
2.Headset Jack Cover
3.Beltclip Hole
4.Speakerphone Speaker and Ringer
5.Handset Battery Compartment
6.New Message LED
7.Handset Earpiece
8.LCD Display
9. [menu/clear] key
[redial/pause] key
10.
[
]
11. /flash
key (talk/flash)
12.[ ]
(phonebook)
key
[*/tone/<] key
13.
[xfer/intercom] key
14.
15.
16.
17.
key (Enter/Voice Mail)
key(up)
key (end call)
key (caller ID)
[
18.
19.
20.
]
(down)
key
key
#/>
(speaker)
21. key
22.Handset Microphone
23.Handset Charging Contacts
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DCT756 - Parts of the Base
30
30. Reeggiissttrrattion buutton
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DCT7565 - Parts of the Base
[speaker] key and
[hold]
key
speaker LED (speaker)
[int’com/xfer]
[flash]
key
key (intercom/transfer)
[dnd] key and LED
(do not disturb)
[memory] key
[redial] key
[mute/find hs]
key (find handset)
[
]
*/tone key
[#]
key
[
]
[pause] key
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset Icons
ICON
STATUS
DESCRIPTION
The Battery icon indicates the handset battery status: empty, low,
medium, and full
Standby/Talk
Standby
Talk
The Ringer Off icon indicates that the ringer is turned off.
The Mute icon appears when you mute the handset.
Talk
Talk
The Boost icon appears when Clarity Boost is enabled.
The Speaker icon appears when the handset speakerphone is in use.
Talk
The Privacy icon appears when Privacy Mode is enabled.
The Standby Screen
When the phone is in standby, the handset display shows the following items:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Interface
Using the Four-way Function Key
Your handset has a four-way function key that allows you to move the
cursor on the display and access the most commonly used features at
the touch of a button. By moving this key to the left, you open the Phone-
book. Move the key to the right to access Caller ID information. To use
this four-way key, place your thumb over the key on the handset and
move to the four positions to get the feel of how it moves and operates.
Using the Handset Menus
To open the menu, press [menu/clear]. Select the option you want by pressing the four-way function key up or
down. This moves the cursor; the option currently selected has a triangle beside it. Select the option by pressing
.To exit the menu and return to standby, press [ ] on the handset.
If you do not press a key within 30 seconds, the phone times out and exits the menu. When setting Day and Time,
the time-out period is extended to two minutes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Text from Your Handset
You can use the number keypad on your phone to enter text by referring to the letters printed on each number key.
When you press the number key in a text entry field, the phone displays the first letter printed on the number key.
Press the number key twice to display the second letter and three times to display the third. Capital letters are dis-
played first, then lower case letters, then the number on the key.
If two letters in a row use the same number
key, enter the first letter, then use the
[#/>] key to move the cursor to the next
position to enter the second letter.
For example, to enter Movies:
1. Press 6 once to enter M.
2. Use [#/>] key to move the cursor
to the right.
3. Press 6 six times to enter o.
4. Press 8 six times to enter v.
5. Press 4 six times to enter i.
6. Press 3 five times to enter e.
7. Press 7 eight times to enter s.
8. Press
text entry.
to end your
If you make a mistake while entering a
name, use [*/tone/<] or [#/>] to move
the cursor to the incorrect character.
Press [menu/clear] to erase the wrong
character, and then enter the correct
character. To delete all characters, press
and hold [menu/clear].
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When choosing a location for your new phone, here are some important guidelines you should consider:
• The location should be close to both a phone jack and a power outlet that is not connected to a wall switch.
• The base and handset should be kept away from sources of electrical noise such as motors, microwave ov-
ens, and fluorescent lighting.
• For better reception, place the base as high as possible.
• The base should be placed in an open area for optimum range and reception.
• If your home has specially wired alarm equipment connected to a phone line, be sure that installing the sys-
tem does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
contact your telephone company or a qualified installer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting the Base (DCT7565 Only)
This phone can be mounted on any standard wall plate.
1. Snap the wall mount adapter into the notches on the base top.
2. Plug the AC adapter into the DC IN 9V jack.
3. Route the AC adapter cord through the molded wiring channel as
shown.
4. Plug the AC adapter into a standard 120V AC wall outlet.
5. Plug the telephone line cord into the TEL LINE jack.
6. Plug the telephone line cord into the telephone outlet.
7. Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is firmly seated.
DO NOT use an AC outlet controlled by a wall switch.
Notes:
• The DCT756 base is not wall mountable.
• Use only the supplied AD-800 AC adapter with
DCT7565 Base.
Do not use any other AC adapter.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Wall Mounting (DCT7565 Only)
If you don’t have a standard wall plate, you can mount your phone directly to
the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting loca-
tion that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5-feet of a working phone jack to avoid
excessive wire lengths.
• Make sure the wall material is capable of supporting the weight of the
base and handset.
• Use #10 screws with a minimum length of 1-3/8 inches, with anchor-
ing devices suitable for the wall material where the base unit will be
placed.
1. Insert two mounting screws into the wall, using the appropriate anchor-
ing device, 3-15/16 inches apart. Allow about 1/8 inch between the
wall and screw heads for mounting the phone.
2. Refer to the steps on page 14 to complete the mounting process.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Rechargeable Battery
Use only the Uniden BT-909 rechargeable battery pack sup-
plied with your cordless telephone.
Follow the steps below to install a battery.
1. Press in on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2. Place the battery pack in the battery compartment with
the connectors on the battery and on the compartment
aligned.
3. Place the battery case cover back on the handset and
slide it upwards until it clicks into place.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Base and Charging the Handset
1. Connect the AC adapter to the DC IN 9V jack.
2. Connect the AC adapter to a wall outlet that is not controlled by a switch.
3. Place the handset in the base with the LCD screen facing forward.
4. Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter
is plugged in and the handset makes good contact with the base charging contacts.
5. Charge your handset at least 15-20 hours before plugging into the phone line.
Note: Use only the supplied AD-800 AC adapter with your phone.
Do not use any other AC adapter.
DCT7565
DCT756
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Belt Clip
1. Line up the holes on each side of the handset. To
attach the belt clip, insert into the holes on each
side of the handset. Press down until it clicks.
2. To remove the belt clip, pull either side of the belt
clip to release the tabs from the holes.
Connecting to the Phone Line
Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and to a standard telephone wall outlet.
Testing the Connection
To test your connection try making a call. If your
call connects, the settings are fine. If your call
does not connect check the following:
1. Check the AC adapter cord. Make sure it is
securely connected to the DC IN 9V con-
nector and to a standard AC power outlet.
DCT756 Base Shown
2. Check to make sure the battery is fully charged. (If you don’t see the
“battery full” icon, check to make sure the battery is properly connected).
3. Change “dial mode” (instructions follow).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Dial Mode
Your phone can communicate with the telephone network in two different ways:
tone dialing or pulse dialing. These days, most phone networks use a method
called tone dialing, so your phone comes programmed for tone dialing. If your
phone company uses Pulse dialing, you will need to change your phone’s dial
mode. If you cannot connect to the telephone network, please follow the steps
below to modify your phone’s settings:
1. Press [menu/clear]. Select the GLOBAL SETUP menu, and then the
DIAL MODE submenu.
2. Scroll [ ] to select PULSE. (The initial setting is TONE).
3. Press
. You hear a confirmation tone.
If you need to change the dial mode back to Tone, follow the same procedure, but select TONE in step 2.
Basic Setup
Selecting a Language
Your phone supports three languages: English, French and Spanish.
Once you select a language, the menus on the handset will display in
that language. The default language is English.
1. Press [menu/clear]. Select the HANDSET SETUP menu, and
then the LANGUAGE submenu.
2. Move the cursor to choose ENGLISH, FRANÇAIS (French), or
ESPAÑOL (Spanish).
3. Press
. You hear a confirmation tone.
Setting the Day and Time
To change the day and time shown in the display, follow the steps below.
Note: If you don’t press any keys for two minutes when setting the day and
time, the phone exits the menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press [menu/clear]. Select the GLOBAL SETUP menu, then the DAY & TIME submenu option.
2. Move the cursor to select the day of the week, then press
.
3. Move the cursor to set the hour, then press
4. Move the cursor to set the minute, then press
5. Move the cursor to choose AM or PM, then press
.
.
. You hear a confirmation tone.
Activating Caller ID on Call Waiting and Call Waiting Deluxe
Your phone supports Caller ID on Call Waiting (CIDCW), so you see the
name and number of someone who calls when you’re already on the line.
Your phone also supports Call Waiting Deluxe (CWDX), which gives you a
choice of how you want to handle a waiting call. You need to subscribe to
these features with your phone company before you can use them. To let
your phone support these features, follow the steps below:
See page 35 for instructions on using Call Waiting Deluxe.
1. Press [menu/clear]. Select the GLOBAL SETUP menu, then the CIDCW submenu.
2. Move the cursor to select CW (Call Waiting) ON/CWDX (Call Waiting Deluxe) ON, CW ON/CWDX OFF, or
CW OFF/CWDX OFF.
3. Press
. You hear a confirmation tone.
Activating Personal Ring
You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up
the Caller ID information in your phonebook. If you’ve assigned a personal ringer to that number, the phone uses it
so you know who is calling. To turn on personal ring, follow these steps:
1. Press [menu/clear]. Select the HANDSET SETUP menu, and then the PERSONAL RING submenu.
2. Move the cursor to select ON or OFF.
3. Press
. You will hear a confirmation tone.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating the Key Touch Tone
Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off.
1. Press [menu/clear]. Select the HANDSET SETUP menu, then the KEY TOUCH TONE submenu.
2. Move the cursor to select ON or OFF.
3. Press
. You hear a confirmation tone.
Setting up Voice Mail
If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message
LED flashes whenever you have messages waiting in your voice mailbox. If you have programmed your access
number into your phone, you can simply press
to access your voice mail. When you subscribe to the
service, your voice mail provider provides you with the access number and the required voice mail signaling tone.
Setting the Voice Mail Signaling Tone
Your telephone service provider should provide you with the specifics of your voice mail service upon your enroll-
ment. If you are having trouble with your message waiting indicator on your phone not illuminating when you have
waiting messages, you will need to contact your service provider and inquire as to which type of message notification
signal--either Frequency Shift Keying (FSK) or Stutter Dial Tone (SDT)--their service uses.
If your voice mail service uses an FSK message signal to alert you of a new voice mail message, you must turn off
the Voice Mail Tone. If your voice mail service uses an SDT message signal to alert you of new voice mail messag-
es, you can leave the Voice Mail Tone on.
Follow the instructions below to set up your cordless phone settings:
1. Press [menu/clear]. Select the GLOBAL SETUP menu,
then the VOICE MAIL TONE submenu.
2. Move the cursor to set the voice message indication (SDT message
signal) to ON or OFF.
3. Press
. You hear a confirmation tone.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming One-Touch Voice Mail Access
You can program your voice mail access number to the Voice Mail key
on each handset so you can
get your messages at the touch of a button. Your voice mail service provider will supply you with the access number.
This number may be simply a phone number.
To edit the voice mail number, follow the steps below:
1. Press [menu/clear].
2. Move the cursor to HANDSET SETUP menu and press
3. Move the cursor to EDIT VOICE MAIL and press
4. Enter your personal access number (up to 20 digits).
.
.
5. If you need to have the phone wait before sending the next digits, press [redial/pause] to insert a two-second
pause in the dialing sequence. For a longer pause, press [redial/pause] multiple times. A P appears in the
display each time you press [redial/pause] and each pause counts as one digit.
6. Press
when you are finished.
Resetting the Voice Message Waiting Indicator
When you receive a new voice mail message, the LED on the top of the handset flashes. In the event your message
alert tone gets out of sync with your phone company’s voice messaging system, you can reset back to its original “no
messages waiting” state. To reset, press and hold [find hs] on the DCT756 base or [mute/find hs] on the DCT7565
base for 5 seconds. A beep sounds and the message alert tone is reset.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Extra Handsets
Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do
not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power
is available to connect the handset charger. The accessory handsets connect to the base to make and receive calls
just like the handset that came with the main base. All the handsets ring when you receive a call.
Compatible Handsets
Your phone is compatible with the following Uniden 2.4 GHz Digital Accessory Handsets: DCX640, DCX700, and
DCX750. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.) If you
purchase an accessory handset, you must register the handset to the main base before use. Accessory handsets will
not operate until they are registered.
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack. The battery
recharges automatically when the handset is placed in the charger.
1. Connect the AC adapter to the DC IN 9V jack and to a stan-
dard 120V AC wall outlet. Use only AC adapter Model Num-
ber AD-0005.
2. Set the charger on a desk or tabletop, then place the handset
in the charger with the keypad facing forward.
3. Make sure that the charge LED illuminates. If the LED does
not illuminate, check that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
4. Charge the handset battery pack for at least 15-20 hours be-
fore using your new cordless telephone for the first time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering Accessory Handsets
If you purchase an accessory handset, you need to register the handset before use. Only one handset can be reg-
istered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre-
registered handsets display a handset ID number. Handsets that have not been registered display MODELS VARY!
CHARGE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL. (If an accessory
handset has ever been registered to a base, you must reset the handset before you can register it to a new base.
See Resetting Handsets on page 25.)
When you register an extra handset to the base, the handset ID will be assigned.
Registering DCX750 Handsets
1. Before registering the DCX750 accessory or extra handset, the battery pack MUST be charged for 15-20
hours.
2. Place the extra handset in the main base unit to begin registration.
3. While the handset is registering, HANDSET REGISTERING appears on the LCD display. When REGISTRA-
TION COMPLETE appears, the handset has been registered to the base. If REGISTRATION FAILED ap-
pears, please try these steps again.
Registering DCX640 and DCX700 Handsets
1. For the DCT756, press and hold the registration button on the bottom of the base. For the DCT7565 dual-
keypad base, press and hold [flash] until the charge LED starts to flash.
2. On the handset, press and hold [#] until you hear a beep.
3. While the handset is registering, HANDSET REGISTERING appears on the LCD display. When REGISTRA-
TION COMPLETE appears, the handset has been registered to the base. If REGISTRATION FAILED ap-
pears, please try these steps again.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting Handsets
If you want to register a handset to a different base or replace a handset with an-
other one, you must first clear the registration information from the base and the
handset.
1. Press and hold [ ] and [#/>] on the handset for at least 5 seconds until the
SYSTEM RESET menu appears. Select the DEREGISTER HS submenu.
WHICH HANDSET? appears.
2. Move the cursor to select the handset ID to be de-registered from the list, and then press
DEREGISTER HS appears.
.
3. The phone asks you to confirm the deregistration. Move the cursor to select YES, then press
. A
confirmation tone sounds. The handset clears the registration information from the base and then deletes its
own link to the base. The handset now displays MODELS VARY! CHARGE HANDSET ON THE BASE FOR
REGISTRATION OR REFER TO OWNER’S MANUAL. To register the handset to a base see page 24.
Setting up the Phonebook
Your phone lets you store up to 100 names and numbers in your phonebook in
the handset. Your phone shares memory between your phonebook and CID en-
tries. Once you store 100 phonebook entries, CID information is not stored and
only appears during a new incoming call. When phonebook and CID entries are
full, a beep sounds and MEMORY FULL appears. You cannot store any additional
names and numbers unless you delete some of the existing ones.
You can also use the phonebook to store a group of numbers (up to 20 digits)
that you may need to enter once your call connects. This is referred to
as chain dialing.
Creating Phonebook Entries
To store names and numbers in your phonebook, follow these steps:
1. When the phone is in standby mode, press [ ].
2. To create a new phonebook entry, move the cursor to select STORE NEW.
3. Press
. STORE/EDIT NAME appears.
4. Enter the name for this entry (STORE/EDIT NAME). Use the
25
Download from Www.Somanuals.com. All Manuals Search And Download.
keypad to enter a name for this entry; the name can contain up to 16 characters. (See page 12 for entering
text instructions.) If you do not want to enter a name for this entry, your phone stores this entry as <No
Name>. Press
when you are finished.
5.Enter the number for this entry (STORE/EDIT NO.). Once you have stored a name, STORE/EDIT NO.
appears. Use the number keypad to enter the phone number; the phone number can contain up to 20 digits.
If you need the phone to pause between digits when it’s dialing (for example, to enter an extension or an
access code), press [redial/pause] to insert a two-second pause. A P appears on the display. You can also
use more than one pause together if two seconds is not long enough. Each pause counts as one digit.
6.Assign a personal ring tone for this entry (PERSONAL RING). You can attach a personalized ring tone to
each phonebook entry; the phone uses this ring tone when this person calls. See page 31 for a selection list.
7.Move the cursor to select one of the 20 different ring tone options. As you select each ring tone, a sample of
that tone sounds. When you hear the ring tone you want to use,
press
.
If you do not want to use a personal ring tone for this phonebook
entry, select the NO SELECTN option, and the phone uses your
standard ring tone setting.
8.Your phone handset has 10 speed dial numbers, [0] to [9]. Move
the cursor to select the speed dial number you want to assign to
this phonebook entry, and press
. Select
NO SELECTN if you do not want to assign this entry to a speed dial
number.
A tone sounds confirming that the new phonebook entry has been stored,
and DONE! appears the display.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Base Speed Dial Numbers (DCT7565 Only)
The DCT7565 dual-keypad phone can store 10 speed dial numbers, [0] to [9]. Follow the steps below to store new
speed dial numbers in the base. (Handset speed dial numbers are stored as part of a phonebook entry. See Creating
Phonebook Entries on page 25 for information on programming handset speed dial numbers.)
1. With the phone in standby, press [memory].
2. Use the number keypad to enter the phone number; the phone number can contain up to 20 digits. If you
need the phone to pause between digits when it is dialing, such as the need to enter an extension or an ac-
cess code, press [pause] to insert a two-second pause. You can also use more than one pause if two-sec-
onds is not long enough. Each pause counts as one digit.
3. Press [memory] again, and then press the number key [0] to [9] where you want to store this phone number.
A confirmation tone sounds.
Deleting Base Speed Dial Numbers
1. With the phone in standby, press [memory] twice.
2. Press the number key, [0] to [9] that contains the phone number you want to delete. A confirmation tone
sounds.
Finding a Phonebook Entry
Press [ ] to open the phonebook.Then, select DIAL/EDIT. Phonebook entries are stored in alphabetical order. To
scroll through the phonebook from A to Z, press [ ].To scroll through the phonebook from Z to A press [ ].
You can also use the letters on the number keys to jump to a name that starts with that letter. Press a number key
([2] to [9] and [0]) once for the first letter, twice for the second letter, and so on. The phonebook jumps to the first
entry that begins with the letter you entered; you can then use [ ] or [ ] to scroll to other entries. For example, to
search for an entry beginning with the letter M, press [6] once. To close the phonebook, press [ ]. If you are looking
up a phonebook entry during a call, press [ ] again instead of [ ] to close the phonebook.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing an Existing Phonebook Entry
1. With the phone in standby, press [
] to open the phonebook.
2. Select DIAL/EDIT.
3. Use [ ] or [
] to scroll through the phonebook entries. When you come to the entry you
want to edit, press
.
4. Follow the steps for Creating a Phonebook Entry on page 25. If you do not wish to change the information at
any step, simply press to go to the next step.
Storing Caller ID or Redial Numbers in the Phonebook
You can store Caller ID records or redial numbers in the phonebook so you can use them later.
Note: If the Caller ID information did not include the number, then you will not be able to store it.
1. When the phone is in standby, press [ ] to open the Caller ID list or [redial/pause] to open the redial list.
2. Use [ ] or [ ] to scroll through the Caller ID records or redial numbers. When you come to the information
you want to store, press
. STORE/EDIT NAME appears.
3. If the phone number is already stored in memory, a beep sounds, and THIS DATA IS ALREADY STORED!
appears in the display. The number will not be stored.
Follow the steps for Creating Phonebook Entries on page 25.
Deleting Phonebook Entries
To erase individual phonebook entries or erase all the phonebook entries at once follow the steps below.
1. When the phone is in standby, press [ ].
2. To delete a single phonebook entry, move the cursor to select DIAL/EDIT, then press
.
3. Use [ ] or [ ] to select the desired phonebook entry, then press [menu/clear].
4. DELETE MEMORY? appears in the display. Select YES, then press
sounds, and DELETED! appears in the display.
. A confirmation tone
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting All the Phonebook Entries at Once
1. When the phone is in standby, press [ ].
2. Move the cursor to select DELETE ALL, and press
DELETE ALL? appears in the display.
.
3. Select YES, then press
. A confirmation tone sounds,
and DELETED! appears in the display.
Copying Phonebook Entries to Another Handset
If you have more than one handset, you can transfer stored phonebook entries from one handset to another without
having to re-enter names and numbers. You can transfer one phonebook entry at a time or all phonebook entries at
once.
1. When the phone is in standby, press [
2. Move the cursor to select COPY, and then press
Move the cursor to select the handset to which you want to transfer
the phonebook entries, then press
3. Move the cursor to select ONE MEMORY or ALL MEMORY, then
press
].
.
.
.
4. If you select ALL MEMORY, ARE YOU SURE? appears. Move the
cursor to select YES, then press
want to transfer and then press
. If you select ONE MEMORY, select the phonebook entry you
.
5. The phonebook entries will be transferred to the designated station. During the copy process, the receiving
handset shows RECEIVING and the Banner name of the sending handset.
6. When the transfer is completed, DONE! appears on the handset.
Notes:
• If your phonebook contains 100 entries, you cannot store any new phonebook entries. A beep sounds, and
MEMORY FULL appears on the display.
• If the selected handset is out of range or data transfer is canceled, UNAVAILABLE appears in the display.
Phonebook listings are not transferred.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Phone
Changing the Handset Banner
Each handset displays the banner name once it is registered to the base.
The default banner is HANDSET #1, HANDSET #2, etc. You can change
the name your phone displays by changing the banner display. If you
have more than one handset, you can use the banner name to identify
your handset during handset-to-handset functions like intercom and Di-
rectLink. The banner lets you customize the name your handset displays.
The name is displayed on the LCD screen during Standby, Intercom, In-
tercom Hold, Room/Baby Monitor, and Copy Phonebook operations. The
banner name is displayed on the receiving handset as well.
1. Press [menu/clear].
2. Select the HANDSET SETUP menu, then the BANNER submenu.
3. Use the keypad to enter or edit the banner name. (See page 12 for detailed instructions on entering text.)
Press
. A confirmation tone sounds.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Ring Tones (Handset Only)
You may choose from 10 melodies or 10 tones for your phone’s primary ring tone. Each station can use a different
ring tone or melody. The available ring tones are listed below:
Melodies
Beethoven’s Symphony #9 [Beethoven9]
Ringers
Flicker
For Elise [Elise]
Clatter
We Wish You A Merry Christmas [Merry- Xmas]
Home Sweet Home [Hm Swt Hm]
Lorri Song #6 [Lorri Song]
Soft Alert
Wake Up
Light Bug
Beep Boop
Tone Board
Chip Chop
Party Clap
Reminder
When Irish Eyes Are Smiling [Irish Eyes]
Aura Lee [Aura Lee]
Let Me Call You Sweet Heart [Sweetheart]
Star Spangled Banner [Star Spngl]
Old MacDonald [Old MacDld]
1. Press [menu/clear].
2. Select the HANDSET SETUP menu, and then
the RINGER TONES submenu.
3. Move the cursor to a ring tone. As each ring tone is selected, you
will hear a sample of the ring tone.
4. When you hear the tone you want to use, press
. You
will hear a confirmation tone.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating AutoTalk (Handset only)
AutoTalk allows you to answer the phone simply by removing the handset
from the cradle. You do not have to press any buttons to answer the call.
1. Press [menu/clear].
2. Select the HANDSET SETUP menu, then the AUTO TALK sub-
menu.
3. Select ON or OFF, and press
tion tone.
. You hear a confirma-
Activating Any Key Answer (Handset only)
Any Key Answer allows you to answer the phone by pressing any key in
the twelve-key pad.
1. Press [menu/clear].
2. Select the HANDSET SETUP menu, and then the ANY KEY
ANSWER submenu.
3. Select ON or OFF, then press
tion tone.
. You hear a confirma-
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone
From the base
From a cordless
From a handset
speaker phone
speaker phone -
handset
DCT7565 only
1. Remove the handset from the charging
cradle.
1. Remove the handset from
the charging cradle.
2. Press [ ].
3. Listen for the dial tone.
4. Dial the number
OR
1. Remove the handset from
the charging cradle.
2. Dial the number.
1.
Press [speaker]
2.
Listen for the
dial tone.
2. Press [ /flash].
3. Listen for the dial tone
4. Dial the number.
OR
3.
Dial the number.
Making
a Call
1. Remove the handset from the charging
cradle.
2. Dial the number.
3. Press [ ].
3. Press [ /flash].
1. Pick up the handset. If
AutoTalk is on, the phone answers when
you remove the handset from the charg-
ing cradle.
1. Pick up the handset. If
AutoTalk is on, the phone
answers when you re-
move the handset from the
charging cradle.
Press [speaker]
Answering
a Call
2. Press [ /flash]. If Any Key Answer is
on, you can also press any
number keypad.
2. Press [ ].
Hanging Up
Press [speaker]
Press [ ] or return the handset to the cradle
Press [ ] or return the handset
to the cradle
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call from the Phonebook
1. When the phone is in standby, press [ ] to open the phonebook.
2. Move the cursor to select DIAL/EDIT, and then press
.
3. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 27).
4. Press [ /flash] or [ ] on the handset to dial the number.
Note: You can also press [ /flash] before you open the phonebook.
Making a Call with Speed Dial
1. When the phone is in standby, press and hold the number key ([0] - [9]) until the assigned phonebook entry
appears in the display.
2. Press [ /flash] or [ ] on the handset to dial the number.
Making a Call with Base Speed Dial (DCT7565 Only)
1. When the phone is in standby, press [speaker].
2. Press [memory].
3. Press the number key ([0] through [9]) where the desired speed dial number is stored. The phone dials the
programmed number.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press [ ] on the handset. To switch from a speaker phone call to a
normal call, press [ ].
Using Caller ID, Call Waiting
If you subscribe to Caller ID from your phone company, your phone shows you the caller’s phone number and name
(if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also shows you
the name and the number of any call that comes in while you’re on the line.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Caller ID List
You can store up to 100 Caller ID numbers in each handset. Your phone shares memory between your Phonebook
and Caller ID entries. Once you reach your maximum phonebook entries of 100, Caller ID information will not be
stored (but it will still display when the call comes in).
To open the Caller ID list, press [ ] (on the right side of the four-way key). The phone shows the total number of
stored Caller ID records. Use [ ] or [ ] to scroll through the list, or enter a letter on the keypad to jump to the first
caller ID name that starts with that letter.
Making a Call from a Caller ID Record
1. When the phone is in standby, press [
] to open the Caller ID list.
2. Use [ ] or [ ] to find the Caller ID record you want to dial.
3. To add (or delete) a “1” at the beginning of the displayed phone number, press [*/tone/<]. To add (or remove)
the stored area code to the displayed phone number, press [#/>].
4. Press [ /flash] or [ ] to dial the number.
Note: You can also press [ /flash] before you open the Caller ID list.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and select the number you want to delete. Press
[menu/clear]. When the phone asks you to confirm, select YES.
To delete all the Caller ID numbers, press [
YES when asked if you want to DELETE ALL.
] (on the right side of the four-way key) and then [menu/clear]. Select
Warning: When you delete a Caller ID number, you delete it permanently.
Using Call Waiting and Call Waiting Deluxe
You must subscribe through your telephone service provider to receive Call Wait-
ing and Call Waiting deluxe services.
If you have Call Waiting service and a second call comes in when you are on the
phone, a call waiting tone sounds. Press [ /flash] on the handset or [flash] on
35
Download from Www.Somanuals.com. All Manuals Search And Download.
the dual-keypad base, to accept the waiting call. There is a short pause, then you hear the new caller. To return to
the original caller, press [ /flash] or [flash] again.
If you have Call Waiting Deluxe Service, your phone gives you new options. At the touch of a button, you can place
the caller on hold, send them to your voice mail service, or conference them into your current call. You must sub-
scribe to both Call Waiting and Call Waiting Deluxe services to use these features. Not all features are available in all
areas. Check with your telephone provider for details.
1. When you receive a Call Waiting call, press [menu/clear].
2. Move the cursor to select CW Deluxe, and then press
3. Move the cursor or use the number keypad [1] to [7] to select an option.
Ask to Hold — A prerecorded message states that user will be available
shortly, and the call is placed on hold.
Tell Busy — A prerecorded message tells the caller you are busy,
and the waiting call is disconnected.
Forward Call — The caller is sent to your voice mail box, if available.
Answer/Drop 1 — Disconnects the first call, and connects to the new caller.
Conference — Starts a conference call with your first and second callers.
Drop First/Drop Last — During a conference call, allows you to choose
to drop the first or last caller.
4. Press
. You hear a confirmation tone, and the phone returns to the call.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing a Number
You can quickly redial the last 3 numbers dialed on each handset.
From the base
DCT7565 only
From the handset
1.
2.
Press [speaker]
Then press [redial]
1. With the phone in standy, press [redial/pause] to open the redial list.
2. Use [ ] or [ ] to scroll through the redial list.
3. When you find the number you want to dial, press [ /flash] or [ ] to dial
the number.
OR
1. Press [ /flash] or [ ].
2. Press [redial/pause].The last number dialed will be displayed.
Deleting a Redial Record
If you want to delete a phone number from the redial list, follow the steps below:
1. With the phone in standby, press [redial/pause].
2. Use [ ] or [ ] to scroll through the redial list.
3. When you find the redial number you want to delete, press [menu/clear].
4. Select YES, and press
or [menu/clear]. The redialed number is deleted.
Adjusting the Ringer, Handset Earpiece, and
Base Speaker Volume
Adjusting the Ringer Volume
You can choose from three ringer volume settings on the handset (off, low, and high) and
four options (off, low, medium, and high) on the DCT7565 base. With the phone in stand-
by, use [ ] or [ ] on the handset or [
] or [
] on the DCT7565 base to
adjust the ringer volume.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Handset/Base Volume
Earpiece: You can choose from six volume levels for the earpiece. To adjust the earpiece volume while on a call,
press [ ] to make it louder or [ ] to make it softer.
Handset Speaker: You can choose from six volume levels for the handset speaker. To adjust the speaker volume
while on a call, press [ ] to make it louder or [ ] to make it softer.
Base Speaker: You can choose from ten volume levels for the base speakerphone. To adjust the speaker volume
while on a call, press [ ] to make it louder or [ ] to make it softer. This applies to dual-keypad models only.
Adjusting the Audio Tone and Clarity Boost
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a
call. Your phone gives you three audio tone options: low, natural, and high; the default setting, Natural Tone, is rec-
ommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone. To ad-
just the audio tone:
1. With the phone in talk mode, press
to cycle through the three audio tone options.
2. When the desired option appears on the display, stop.
3. After two seconds, the displayed audio tone is set, and the display returns to normal.
If you encounter interference while using your phone, you can manually improve the sound by setting the Clarity
Boost to on. This works only when the phone is in use, so while you are on a call:
1. Press [menu/clear].
2. Move the cursor to CLARITY BOOST, and then press
. BOOST ON and B appear on the display.
Use the same procedure to turn off Clarity Boost. BOOST OFF appears.
Finding a Lost Handset
With the phone in standby, press [find hs] on the base or [mute/find hs] on the dual-keypad base . All registered
handsets will beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any key on
the found handset or press [find hs] (or [mute/find hs] for the dual-keypad model) on the base.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Hold, Conference, and Transfer
Placing a Call on Hold
1. During a call, press [xfer/intercom] on the handset (or [hold] on the DCT7565 base) to place the caller on
hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD.
2. To return to the party on hold, press [ /flash] or [ ] on a handset or [speaker] on the DCT7565 base. The
phone returns to the holding party.
Notes:
• You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party’s line is disconnect-
ed and the phone returns to standby.
• While a call is on hold, Caller ID and Call Waiting can not be used.
Conferencing
If you have more than one handset, up to three people can participate in a conference call on the DCT756 and up to
four people on the DCT7565. A three-way conference call consists of an outside line and two handsets. A four-way
conference call consists of one outside line, two handsets, and the base speakerphone. You can easily join a call al-
ready in progress.
1. Press [ /flash] or [ ] on the handset or [speaker] on the DCT7565 base to join the call.
2. To hang up, return the handset to the cradle or press [ ] on the handset. From the base, press [speaker].
The other station will still be connected to the call.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring a Call
You can transfer a call from one station to another.
From the base - DCT7565 only
From the handset
1. During a call, press [int’com/xfer].
1.
2.
During a call, press [xfer/intercom].
2. The call is automatically placed on hold.
Select the handset you want to talk with
by pressing [1] to [4]. To page all the reg-
istered handsets, press [*/tone/<]. A pag-
ing tone sounds. To cancel the transfer,
press [int’com/xfer] or [speaker].
Use [ ] or [ ] to select the station you want to trans-
fer the call to, then press
be automatically be placed on hold, and a paging tone
sounds. To cancel the transfer, press [ /flash] or [ ].
. The call will
3.
When another station accepts the transferred call, you
will be disconnected. if you want to rejoin the call,
press [ /flash] or [ ] again.
3. When another station accepts the trans-
ferred call, you will be disconnected. If
you want to rejoin the call, press
[speaker] again.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging.
To accept the call transfer:
1. Press [ /flash] or [xfer/intercom] from the handset or [int’com/xfer] or [speaker] on the DCT7565 base.
2. To speak to the caller, press [ /flash] on the receiving handset or [speaker] on the DCT7565 base.
3. Only the first station to answer the transfer page will be connected to the call. If the transfer page is not
picked up within one minute, the operation will be canceled.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Special Features
Do Not Disturb (All Calls) (DCT7565 Only)
DND allows you to mute the ringer of all handsets and the base. With the phone in standby, press and hold [dnd]
on the base. A confirmation tone sounds and the [dnd] LED illuminates. To cancel, press [dnd] again. You can also
mute the ringer tone while the phone is ringing by pressing [dnd] on the DCT7565 base.
Muting the Ringer (One Call Only)
While a handset is ringing, press [ ] on the handset to mute the ringer for this call. The phone rings again on the
next call.
Note:
The handset must be off the cradle to mute the ringer.
Muting the Handset Microphone
Mute turns off the microphone so the caller can’t hear you. The display shows while the microphone is muted.
1. While you are on a call, press [menu/clear].
2. Move the cursor to MUTE and then press
.
appears in the display and remains
while MUTE ON disappears in several seconds.To cancel muting, repeat the procedure.
Muting the Base Microphone (DCT7565 only)
1. During a call, press [mute/find hs] to turn off the microphone.
2. To cancel muting, press [mute/find hs] again or press [speaker].
Privacy Mode
If you don’t want other station to interrupt you while on a call, you can turn on privacy mode. As long as your station
is in privacy mode, other stations won’t be able to join your call or make any calls of their own.
1. While on a call, press [menu/clear].
2. Move the cursor to PRIVACY MODE, and press
. PRIVACY MODE ON appears in the display for
2 seconds, but P appears and remains in the display until the feature is turned off. Other handsets will not be
able to make a call and their display will list UNAVAILABLE when they try to join the call.
To turn privacy off, repeat the procedures listed above.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits instead of 10, you can program your local area code in your
phone. If you get a call from within your area code, you will only see the 7-digit phone number. If you get a call from
outside your area code, you will see all 10 digits. To enter an area code, follow the steps below:
1. Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
2. Use the number keypad [0] to [9] to enter a 3-digit area code. If an area code has already been stored, it will
appear in the display. Press [menu/clear] to delete the stored code, and then enter a new one.
3. Press
. A confirmation tone sounds.
NOTE: Do not program an area code if you must dial all 10 digits to make a local call.
Using the DirectLink Feature
Using the DirectLink feature, a pair of handsets can function as two-way radios. You can
have up to two pairs of handsets using DirectLink at a time. DirectLink communication does
not interfere with the main base’s ability to make or receive telephone calls. You must set
both handsets to use DirectLink communication to activate this feature. Other handsets can
be used while two handsets are in DirectLink communication; however, the two handsets in
DirectLink operation are not able to make or receive calls until DirectLink communication is
canceled.
1. Press [menu/clear] and move the cursor to the DIRECTLINK MODE menu.
2. Press
PRESS SELECT.
3. Press
. The display shows TO ENTER DIRECTLINK MODE
. A confirmation tone sounds, and DIRECTLINK MODE
COMPLETE appears in the display.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a DirectLink Call
1. To call another handset with DirectLink communication, press [ /flash].
The display shows TO DIRECTLINK A HANDSET PRESS [1-4].
2. Press the number of the handset you want to call. If the handset is out of range or not using DirectLink com-
munication, the display shows UNAVAILABLE. To answer a DirectLink call, press [ /flash] or if Any Key An-
swer is on, press any key of the twelve-key pad.
3. To exit the DirectLink call, press [ ].
Exiting DirectLink Operation
To exit DirectLink communication and return to normal standby, press [menu/clear] and then press
or
return the handset to the cradle. DIRECT LINK MODE CANCEL appears in the display.
Making an Intercom Page
You can use the intercom to talk to another station without using the phone line.
From the base - DCT7565 only
From the handset
1. With the phone in standby, press [int’com/
1.
2.
With the phone in standy, press [xfer/intercom].
xfer].
Use [ ] or [ ] to select the station you want to
2. Select the handset you want to talk with by
pressing [1] to [4]. To page all registered
handsets, press [*/tone/<]. A paging tone
sounds.
talk with, then press
. If you select
ALL, all other stations will be paged.
3.
To cancel the intercom page, press [ ].
3. To cancel the intercom page, press [int’com/
xfer].
Notes: Intercom paging will be cancelled if any of the following things occur:
• You receive an outside call or an intercom page while selecting the other handset.
• You do not select a handset within 30 seconds.
• The party does not answer the page within one minute.
• The party is busy.
• The party is out of range (UNAVAILABLE appears on the display).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering an Intercom Page
When the intercom page tone sounds, the display shows the ID of the sta-
tion that is paging.
From the handset, press [ /flash] or [xfer/intercom]. If AutoTalk is on,
the handset automatically answers the page when you remove the hand-
set from the cradle.
From the DCT7565 base, press [int’com/xfer], or [speaker].
To hang up an intercom page from the handset, press [ ]. To hang up an intercom page from the DCT7565 base,
press [int’com/xfer].
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a hand-
set (or the DCT7565 base) in the room you wish to monitor; it will func-
Handset #2
at remote location
tion as a microphone. Another station can be set to function as a remote
One-Way Broadcast
speaker, allowing you to monitor sounds in the room.
1. Press [menu/clear] and enter the ROOM MONITOR menu. TO
ROOM MONITOR appears.
2. Select the station you want to monitor by
using [ ] or [ ].
3. Press
. ROOM MONITOR appears, and you hear
sounds in the room where the station is installed.
Handset #1
near child
4. To turn off the Room Monitor, press [ ] or return
the handset to the cradle.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
• This feature only works when both handsets are within
the range of the base.
• If the party is out of range, UNAVAILABLE appears in the display,
and the operation is canceled.
• While a pair of handsets is in Room/Baby Monitoring, they cannot be used to make or receive calls. Other
handsets can still make and receive calls.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch to tone
dialing after the call connects. This feature is useful when you need tone
dialing to use automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus, etc. If your phone
is set to pulse dialing, make your call normally. Once your call connects,
press [*/tone/<] on the handset (or [*/tone] on the DCT7565 base). Any
you enter from then on will be sent as tone dialing. When this partic-
ular call ends, the phone automatically returns to pulse dialing.
digits
Installing the Optional Headset
Your phone may be used with an optional headset. To use this feature,
insert the headset plug into the headset jack. Your phone is ready for
hands-free conversations. (Headsets may be purchased by calling the Un-
iden Parts Department. See the back cover page for contact information.)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Battery Replacement and Handling
With average use, your phone’s battery should last approximately one year.
To order replacement batteries, please contact Uniden’s Parts Department.
The contact information is on the back cover page.
Battery Contact Maintenance
To maintain a good charge, clean the charging contacts on the handset once
each month. Dampen a cloth with plain water. Gently rub the damp cloth over
the charging contacts until all visible dirt is removed. Dry the contacts thor-
oughly before returning the handset to the charging cradle.
Caution: Do not use paint thinner, benzene, alcohol, or any other chemical
products. Doing so may discolor the surface of the telephone and damage the
finish.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock, use only Uniden AD-800
(DCT7565) and
AD-0005 (DCT756, DCX750) AC adapters and Uniden BT-909 battery pack with your phone.
Caution:
• Do not remove the batteries from the handset to charge them.
• Never throw the battery into a fire, disassemble, or heat them.
• Do not remove or damage the battery casing.
• A replacement Uniden adapter or battery may be purchased by calling Uniden's Parts department (see the
back cover page).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Low Battery Alert
When the battery pack is very low, the phone is programmed to eliminate
functions in order to save power.
The battery pack needs to be charged when the empty battery icon appears.
When LOW BATTERY appears in the display and the phone is in standby, none
of the keys will operate. If you are on a call, complete your conversation as
quickly as possible, and return the handset to the charging cradle.
Talk Time, Standby Time, and Storing the Handset on the Base
With average use, your battery provides approximately 5 hours of talk time and approximately 7 days of stand-
by time. However, even when the battery pack is not being used, it gradually discharges over a long period of time.
Therefore, you can achieve optimum performance if you return the handset to the cradle after each call. If the hand-
set is left off of the base, the actual talk time duration will be reduced respective to the amount of time the handset is
off the cradle.
Troubleshooting
Resetting the Handset
You may need to reset your handset in the following instances:
• You lose a handset and purchase a new one.
• When you try and register to your existing base, you see REGISTRATION FAILED on the menu display.
• You are unable to register any handsets to the base.
• You had a base which needed to be exchanged by the manufacturer.
• When you register your existing handsets to the base, and the handset IDs do not match. (For example, the
handset registers as Handset #4, but you only have two handsets.)
• When you are instructed to by the one of the manufacturer’s call center representatives.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset the handset, do the following:
1. Press and hold [ ] and [#/>] for at least 5 seconds until the SYSTEM RESET menu appears.
Select DEREGISTER HS submenu. WHICH HANDSET? appears.
2. Move the cursor to select the handset ID to be deregistered from the list, and then press
DEREGISTER HS appears.
.
3. The phone will ask you to confirm the deregistration. Move the cursor to YES, and then press
.
You will hear a confirmation tone. the handset will delete its own base information without trying to contact the
base. When the base information is deleted, the handset displays MODELS VARY! CHARGE HANDSET ON
THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL.
If the handset cannot contact the base, it displays UNAVAILABLE. Make sure the handset is in range of the base
and the base is connected to power.
Note: It is also possible to reset the handset back to its original factory settings. All changes including phone-
book entries and Caller ID information will be erased. For more information on resetting the handset back to
contact information, see the back page).
Resetting the Handset without the Base
If your original base is not available for some reason (for example, it is
lost or somehow incapacitated), you can still reset the handset and use it
with another base.
1. Press and hold [ ] and [#/>] for at least 5 seconds until the
SYSTEM RESET menu appears.
2. Move the cursor to select the REPLACING BASE submenu, and
then press
. REPLACE BASE appears.
3. Move the cursor to select YES, and then press
. A confirmation tone sounds. The handset de-
letes its own base information without trying to contact the base. When the base information is deleted, the
handset displays MODELS VARY! CHARGE HANDSET ON THE BASE REGISTRATION OR REFER TO
OWNER’S MANUAL. To register the handset to the new base, see page 24.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base unit. Your unit ships from
the manufacturer with a preset security code. Resetting this code is not normally necessary. In the rare situation that
you suspect another cordless telephone is using the same security code or if you are instructed to change this code
by a manufacturer’s Call Center Representative, you can change the code. To change the digital security code:
1. Reset all handsets (see page 25).
2. Re-register each handset by following the steps on page 24.
Traveling Out of Range
During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the
range limits of the base unit, you hear a beep and see OUT OF RANGE on the display, and then the handset returns
to standby. You may return to the call if you move your handset within the range limits of the base and press
[ /flash] or [ ] within 30 seconds.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your problem, please call our Customer Hotline (see back cover for contact information).
Symptom
Suggestion
The charge LED fails to light
when the handset is placed in
the cradle.
• Make sure the AC adapter is plugged into the base or the charger (if you
have more than one handset) and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak.
• Move the handset and/or base away from metal objects or appliances and
try again.
• Make sure you are not too far from the base.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
Can’t make or receive calls.
• Make sure you are not too far from the base.
• Make sure the line is not in use. If an outside call is already using a line,
you cannot use that line to make another outside call.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and reconnect.
• Change the Digital Security Code (see page 49).
The handset doesn’t ring or
receive a page.
• Make sure that you are not too far from the base.
• Charge the battery in the handset for 15 to 20 hours by placing the handset
on the base or charging cradle.
• Change the Digital Security Code (see page 49).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors, flu-
orescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not dis-
play.
• The call was placed through a switchboard.
• Call your telephone provider to verify your Caller ID service is corrent.
There may be a problem with your Caller ID service.
You cannot register the hand-
set at the base.
• Charge the battery pack in the handset for at least
15 to 20 hours.
• Change the Digital Security Code (see page 49).
The handset doesn’t commu-
nicate with other handsets.
• Change the Digital Security Code (see page 49).
• Make sure you have registered all handsets.
An extra handset can’t join
the conversation.
• Make sure there are not 2 handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Suggestion
The Room Monitor feature
does not work.
• Make sure to place the handset(s) within the range of the base.
The Voice Message Waiting
LED flashes, but there are no
new messages.
• Reset the Voice Message Waiting Indicator (see page 22).
Liquid Damage
Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet:
Exterior
If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the
liquid, and use as normal.
Interior
If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the
handset battery compartment or vent openings on the base):
Handset:
1. Remove the battery cover and leave it off for ventilation.
2. Disconnect the battery pack. Leave the battery cover off and the battery pack disconnected for at least 3
days.
3. Once the handset is completely dry, reconnect the battery pack and the battery cover.
4. Recharge the handset's battery pack for 15 to 20 hours before using.
IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Base:
1. Disconnect the AC adapter from the base, cutting off electrical power.
2. Disconnect the telephone cord from the base.
3. Let dry for at least 3 days.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to
the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work,
please call our Customer Service Hotline (see back page).
Precautions!
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical
shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Metal-Hydride Battery Warning
• This equipment contains a rechargeable Nickel-Metal-Hydride battery.
• The rechargeable batteries contained in this equipment may explode if disposed of in a fire.
• Nickel is a chemical known to state of California to cause cancer.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery used in this equipment in any charger other than the one designed
to charge this battery as specified in the owner's manual. Using another charger may damage the battery or
cause the battery to explode.
Rechargeable Batteries Must Be Recycled or Disposed of Properly.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
The exclamation point within an equilater-
al triange is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
acompanying the appliance.
!
Uniden works to reduce lead content in our PVC coated cords in our products and accessories.
Warning!
The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth
defects or other reproductive harm. Wash hands after handling.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a
wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of
electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local authorities for possible battery disposal instructions.
5. Do not disassemble any component of this product.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
necessary.
SAVE THESE INSTRUCTIONS
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equip-
ment. If this happens the telephone company will provide advance notice
in order for you to make necessary modifications to maintain uninterrupt-
ed service.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Do not open or mutilate the
battery, and disconnect the battery before shipping this product.
The FCC Wants You To Know
Please follow instructions for repairing, if any (e.g. battery replacement
section); otherwise do not substitute or repair any parts of the device ex-
cept as specified in this manual. Connection to party line service is sub-
ject to state tariffs. Contact the state public utility commission, public ser-
vice commission or corporation commission for information. This equip-
ment is hearing aid compatible.
This equipment complies with Part 68 of the FCC rules and the require-
ments adopted by the ACTA. On the bottom of this equipment is a label
that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
Should you experience trouble with this equipment, please contact Un-
iden customer service at 800-297-1023. If the equipment is causing harm
to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
An applicable Universal Service Order Codes (USOC) certification for
the jacks used in this equipment is provided (i.e., RJ11C) in the pack-
aging with each piece of approved terminal equipment. A plug and jack
used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and require-
ments adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instruc-
tions for details.
NOTICE: According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes, are very destructive to telephone
equipment connected to AC power sources. To minimize damage from
these types of surges, a surge arrestor is recommended.
Changes or modifications to this product not expressly approved by Un-
iden, or operation of this product in any way other than as detailed by the
owner’s manual, could void your authority to operate this product.
The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be
certain of the number of devices that may be connected to a line, as de-
termined by the total RENs, contact the telephone provider. For products
approved after July 23, 2001, the REN for this product is part of the prod-
uct identifier that has the format US:AAAEQ##TXXXX. The digits repre-
sented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce de-
pending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn opera-
tion, the FCC RF exposure guidelines were also met when used with the
Uniden accessories supplied or designed for this product. Use of other
accessories may not ensure compliance with FCC RF exposure guide-
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of ser-
vice may be required. But if advance notice isn’t practical, the telephone
company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is
54
Download from Www.Somanuals.com. All Manuals Search And Download.
lines and should be avoided.
that registration was performed based on a Declaration of Conformity in-
dicating that Industry Canada technical specifications were met. It does
not imply that Industry Canada approved the equipment.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around your
home to see what appliances may be causing the problem. In addition,
we recommend that the base not be plugged into a circuit that also pow-
ers a major appliance because of the potential for interference. Be cer-
tain that the antenna on the unit is fully extended when needed. In the
unlikely event that you consistently hear other voices or distracting trans-
missions on your phone, you may be receiving radio signals from anoth-
er cordless telephone or other source of interference. If you cannot elimi-
nate this type of interference, you need to change to a different channel.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equip-
ment is marked on the equipment itself. The REN assigned to each ter-
minal equipment provides an indication of the maximum number of ter-
minals allowed to be connected to a telephone interface. The termination
on an interface may consist of any combination of devices subject only to
the requirement that the sum of the Ringer Equivalence Numbers of all
the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that In-
dustry Canada technical specifications were met.
Finally, it should be noted that some cordless telephones operate at fre-
quencies that may cause interference to nearby TVs and VCRs. To mini-
mize or prevent such interference, the base of the cordless telephone
should not be placed near or on top of a TV or VCR. If interference is
experienced, moving the cordless telephone farther away from the TV or
VCR will often reduce or eliminate the interference.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
“Privacy of communications may not be ensured when using this telephone.”
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways. Be-
cause of the inherent physical properties of radio waves, your communi-
cations can be received by radio receiving devices other than your own
cordless telephone unit. Consequently, any communications using your
cordless telephone may not be private.
I.C. Notice
Terminal Equipment
NOTICE: This equipment meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed by the registration
number. The abbreviation, IC, before the registration number signifies
55
Download from Www.Somanuals.com. All Manuals Search And Download.
PLIED OR ARISING BY OPERATION OF LAW,
One Year Limited Warranty
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRAN-
TIES OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states
do not allow this exclusion or limitation of incidental or conse-
quential damages so the above limitation or exclusion may not
apply to you.
Important: Evidence of original purchase is required for warran-
ty service. WARRANTOR: UNIDEN AMERICA CORPORATION
(“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for
one year, to the original retail owner, this Uniden Product to be
free from defects in materials and craftsmanship with only the
limitations or exclusions set out below. WARRANTY DURA-
TION: This warranty to the original user shall terminate and be
of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A) damaged or
not maintained as reasonable or necessary, (B) modified, al-
tered, or used as part of any conversion kits, subassemblies, or
any configurations not sold by Uniden, (C) improperly installed,
(D) serviced or repaired by someone other than an authorized
Uniden service center for a defect or malfunction covered by
this warranty, (E)
LEGAL REMEDIES: This warranty gives you specific legal
rights, and you may also have other rights which vary from
state to state. This warranty is void outside the United States of
America and Canada. PROCEDURE FOR OBTAINING PER-
FORMANCE OF WARRANTY: If, after following the instruc-
tions in the owner’s manual you are certain that the Product is
defective, pack the Product carefully (preferably in its original
packaging). Disconnect the battery from the Product and sepa-
rately secure the battery in its own separate packaging within
the shipping carton. The Product should include all parts and
accessories originally packaged with the Product. Include evi-
dence of original purchase and a note describing the defect
that has caused you to return it. The Product should be shipped
freight prepaid, by traceable means, to warrantor at:
used in any conjunction with equipment or parts or as part of
any system not manufactured by Uniden, or (F) installed or pro-
grammed by anyone other than as detailed by the owner’s man-
ual for this product. STATEMENT OF REMEDY: In the event
that the product does not conform to this warranty at any time
while this warranty is in effect, warrantor will either, at its option,
repair or replace the defective unit and return it to you without
charge for parts, service, or any other cost (except shipping and
handling) incurred by warrantor or its representatives in connec-
tion with the performance of this warranty. Warrantor, at its op-
tion, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND
ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES
OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IM-
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
56
Download from Www.Somanuals.com. All Manuals Search And Download.
E
M
Index
Earpiece Volume ........................ 38
Entering Text from the Handset.. 12
Maintenance............................... 46
Making a Call.............................. 33
Making a call from a Caller ID Re-
cord ................................. 35
Making a call with Speed Dial..... 34
Muting the Microphone............... 41
Muting the Ringer....................... 41
A
Adjusting Audio Tone.................. 38
Answering a Call......................... 33
Any Key Answer ......................... 32
AutoTalk...................................... 32
F
Four Way Function Key.............. 11
H
B
Handset Banner.......................... 30
Hanging Up................................. 33
O
Battery Contact Maintenance..... 46
Battery Replacement
Optional Headset........................ 45
Out of Range.............................. 49
I
and Handling................... 46
Important Safety Instructions...... 53
Installing the Belt Clip................. 18
Installing the Phone.................... 13
Installing the Rechargeable
P
C
Personal Ring............................. 20
Phonebook ................................. 25
Placing a Call on Hold................ 39
Privacy Mode.............................. 41
Product Overview......................... 6
Caller ID on Call Waiting ............ 20
Call Waiting Deluxe .................... 20
Clarity Boost ............................... 38
Controls Part of the Handset........ 7
Battery............................. 16
K
D
Key Touch Tone.......................... 21
R
Day and Time ............................. 19
Deleting a Redial Record............ 37
Deleting Caller ID Numbers........ 35
Dial Mode ................................... 19
Digital Security Code.................. 49
DirectLink.................................... 42
Do Not Disturb............................ 41
L
Redialing a Number.................... 37
Resetting Handsets.................... 25
Ringer Tones .............................. 31
Ringer Volume............................ 37
Room/Baby Monitor.................... 44
Low Battery Alert ........................ 47
57
Download from Www.Somanuals.com. All Manuals Search And Download.
S
Specifications
Speaker Volume......................... 38
Speed Dial.................................. 26
Operating Temperature
0° C to 50° C (32° F to 122° F)
Base: AD-800
AC Adapter Part Num-
ber
T
Charging Cradle: AD-0005
Talk and Standby Time............... 47
The FCC Wants You To Know.... 54
Base: 120V AC, 60 Hz
Input Voltage
Charging Cradle: 120V AC, 60 Hz
V
Base: 9V DC @ 350mA
Output Voltage
Charging Cradle: 9V DC @ 210mA
Voice Mail................................... 21
Voice Mail Programming............. 22
Voice Mail Tone .......................... 21
Voice Message Waiting Indicator22
Battery Part Number
Capacity
BT-909
3.6V DC @ 600mAh
Notes:
• Use only the supplied AD-800 and AD-0005 AC adapters.
• Do not use any other AC adapter.
• Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
• Do not place the base in direct sunlight or subject it to high
temperatures.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
At Uniden, we’ll take care of you!
Thank you for purchasing a Uniden product. if you have any questions or problems,
please do not return this product to the place of purchase.
Our customer care specialists are here to help you! Visit our website at www.
uniden.com or call our Customer Service Hotline at 1-800-297-1023,
Monday through Friday, 7 AM to 7 PM or Saturday/Sunday, 9 AM to 5 PM,
CST. The Customer Service Hotline is closed on holidays.
Having Trouble?
To order headsets, additional handsets, replacement batteries, or other ac-
Monday through Friday, 8 AM to 5 PM, CST.
Need A Part?
If you need special assistance due to a disability, or have questions on the
accessibility features of this product, please call 1-800-874-9314 (voice or
TTY).
Help For Our
Customers with
Special Needs
May be covered under one or more of the following U.S. patents:
4,797,916
5,533,010
5,663,981
5,758,289
5,864,619
5,960,358
6,314,278
6,788,920
6,914,940
5,381,460
5,574,727
5,671,248
5,768,345
5,893,034
5,987,330
6,418,209
6,788,953
5,426,690
5,581,598
5,696,471
5,787,356
5,912,968
6,044,281
6,618,015
6,839,550
5,434,905
5,650,790
5,717,312
5,794,152
5,915,227
6,070,082
6,671,315
6,889,184
5,491,745
5,660,269
5,732,355
5,801,466
5,929,598
6,125,277
6,714,630
6,901,271
5,493,605
5,661,780
5,754,407
5,825,161
5,930,720
6,253,088
6,782,098
6,907,094
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|