Owner’s Manual
Caster Kit for Tripp Lite 4-Post
Open-Frame Rack Systems
Model: SRCASTER
The SRCASTER Kit consists of four (4) casters with required locknuts and bolts for installation on Tripp Lite 4-Post
Open Frame Rack Systems (Model SR4POST). The casters install to the base plates of the racks using the pre-drilled
holes as shown in the illustration below.
WARNING! Do not attempt to install casters with equipment mounted in the rack. Remove all
equipment from the rack before installing casters. Failure to heed this warning may result in damage
to rack and equipment or personal injury.
Installing Casters:
SR4POST Open Frame Rack
1111 West 35th Street • Chicago, IL 60609
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice. Made in China.
Copyright © 2008 Tripp Lite. All rights reserved.
93-2811 200808121
Download from Www.Somanuals.com. All Manuals Search And Download.
|