Owner’s Manual
VGA with Audio Over Cat5
Extender Wallplate Kit
Model: B130-101A-WP
Safety Information
2
2
Package Contents
Product Features
Optional Accessories
Specifications
2-3
3
3
Features
4
Installation
5
Warranty & Warranty Registration
Español
6
7
Français
13
1111 W. 35th Street, Chicago, IL 60609 USA
Note: Follow these instructions to ensure proper operation and prevent damage
to this device and its connected equipment.
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Features
•
•
•
•
Provides connections for optional local monitor and speakers
Features built-in Equalization and Gain controls to adjust the video image
Supports video resolutions up to 1920x1440
No drivers required
Optional Accessories
•
P504-Series Monitor Cables with RGB Coax and Audio, HD15 Male/
Male, Mini-Stereo 3.5 mm Male/Male
•
•
•
•
•
•
P312-Series 3.5 mm Mini-Stereo Cable
P502-Series Monitor Cables with RGB Coax, HD15 Male/Male
P524-Series Zero-Skew UTP Bulk Cable
N020-01K-GY Cat5e Bulk Stranded Cable, 1000 ft.
N022-01K-GY Cat5e Bulk Solid Cable, 1000 ft.
N222-01K-GY Cat6 Bulk Solid Cable, 1000 ft.
Specifications
Signal Type
Video Amplifier Bandwidth
Input DDC Signal
VGA, SVGA, XGA, UXGA and WUXGA
350 Mbps
0.7 Volts p-p (TTL)
Signal Noise Ration
Local Unit Ports
90 dB
(1) HD15 Female, (1) 3.5 mm Female,
(1) 110 Punchdown Female
(1) HD15 Female, (1) 3.5 mm Female,
(1) 110 Punchdown Female
(2) 5V, 2.0A DC Power Supplies
2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
2.75 in. (W) x 4.5 in. (H) x 1.1 in. (D)
0.2 lb
Remote Unit Ports
Power Supply
Dimensions (Local Unit)
Dimensions (Remote Unit)
Local Unit Weight
Remote Unit Weight
0.2 lb
Note: Specifications are subject to change without notice. Mass and dimensions are
approximate; please take the actual products as the standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Features
Source Video-In Port: HD15 Female Connector.
1
2
Local Unit Power LED: This LED illuminates when the external power
supply is connected and the unit is receiving power.
Source Audio-In Port: 3.5 mm Female Connector.
3
4
5
Power Jack: The 5V, 2A external power supply plugs in here.
110 Punchdown Connector: Connect Cat5/5e/6 cable between the 110
Punchdown Connectors on the local and remote units.
Remote Unit Video-Out Port: HD15 Female Connector.
6
7
Remote Unit Power LED: This LED illuminates when the external
power supply is connected and the unit is receiving power.
Remote Unit Audio-Out Port: 3.5 mm Female Connector.
Gain Adjustment: Adjusts brightness.
8
9
EQ Adjustment: Adjusts equalization length.
10
Local Unit (By Source)
Remote Unit (By Display)
Local
Remote
Audio
3
8
7
Audio
2
1
Power
Power
Gain
6
9
EQ
10
4
4
DC5V, 2.0A
DC5V, 2.0A
Rear
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Installation
1
2
5
6
3
4
7
Connect the Male end of the VGA with audio splitter cable to the HD15
and 3.5 mm ports on the source computer.
1
2
3
Connect one of the Female ends of the VGA with audio splitter cable to the
Local Unit’s HD15 and 3.5 mm ports using a VGA cable and audio cable.
(Optional) Connect a local monitor and speakers to the remaining
Female connectors of the VGA with audio splitter cable using a VGA
cable and audio cable.
Connect the external power supply to the power jack on the local unit
and plug it into an appropriate power source.
4
5
6
7
Connect the 110 Punchdown Connector on the local unit to the 110
Punchdown Connector on the remote unit using Cat5/5e/6 cable.
Connect the HD15 and 3.5 mm ports on the remote unit to a monitor
and speakers using a VGA cable and audio cable.
Connect the external power supply to the power jack on the remote unit
and plug it into an appropriate power source.
Turn the display(s) on first.
Turn on the computer.
8
9
If the video on your monitor is either too dark or too light, use the Gain
Adjustment on the remote unit.
10
If the video on your monitor is fuzzy, or shows a ghosting effect, use the
EQ Adjustment on the remote unit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Warranty & Warranty Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for
a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this
warranty is limited to repairing or replacing (at its sole option) any such defective products. To
obtain service under this warranty, you must obtain a Returned Material Authorization (RMA)
number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned
to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid
and must be accompanied by a brief description of the problem encountered and proof of date and
place of purchase. This warranty does not apply to equipment which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OF THIS PRODUCT, EVEN IFADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss
of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims
by third parties, or otherwise.
WARRANTY REGISTRATION
You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing
regulations, when customers buy new electrical and electronic equipment from Tripp Lite they
are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on
the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to
change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA
200908079 932929-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
6
|