USB
3-in-1 Card Reader/Writer
TS0MFLRD
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing Transcend’s 3-in-1 Card Reader/Writer, a small
device designed for fast and easy data exchange from CompactFlash Cards,
SmartMedia Cards, and IBM Microdrives. It is an easily installed device,
which only needs a USB interface to allow its use by any PC, Mac or notebook
computer.
Features
•
•
•
•
•
•
USB connection for true Plug and Play
Compliant with USB specification version 1.1
Supports CompactFlash Card, SmartMedia Card, and IBM Microdrive
USB bus powered. No external power needed.
High Performance Transfer Rate: 12M bit/sec at full speed
Convenient and fast data exchange for MP3, PDA, Digital Camera, etc.
Package Contents
The package should contain the following items:
•
•
•
•
3-in-1 Card Reader/Writer
Driver CD
Quick Installation Guide
Mini USB Cable
System Requirements
•
Desktop or notebook computer with USB port
•
One of following operating systems:
− Windows® 98/98SE
− Windows® Me
− Windows® 2000
− Windows® XP
− Mac™ OS
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Setup and Driver Installation
Follow the steps below to install the 3-in-1 Card Reader/Writer and driver for
the first time.
Hardware Setup
™ In Windows 98/98SE, the driver must be installed before
hardware setup.
1.
Plug the “device end” of the USB cable into the 3-in-1 Card Reader/Writer,
and connect the other end of the USB cable into the USB port of the
computer (as shown in the figure below).
2.
Refer to the following instructions to install the appropriate driver and begin
using the 3-in-1 Card Reader/Writer.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver Installation for Windows 98/98SE
1.
Insert the Driver CD into the CD-ROM drive of your computer.
2.
Click Start in the Windows Taskbar. Then, select Run to continue.
3.
Type D:\WIN98\SETUP.EXE, where “D” is your CD-ROM drive. Click OK to
continue.
4.
Follow the on-screen instructions to complete driver installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The 3-in-1 Card Reader/Writer is ready for use. You can find two new
Removable Disk drives with newly assigned drive letters in the My
Computer window.
Driver Installation for Windows 2000
Upon completion of hardware setup, Windows 2000 will auto detect your 3-in-1
Card Reader/Writer and install the default driver, which only supports
SmartMedia Cards. You will need to use the driver provided with the Driver CD
to upgrade the driver for access to the full functions of the 3-in-1 Card
Reader/Writer.
1.
2.
Insert the Driver CD into the CD-ROM drive of your computer.
Right click on My Computer and select Properties.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
The System Properties window will appear. Select Hardware and click
Device Manager to continue.
4.
The Device Manager window will appear. Find Universal Serial Bus
controllers, and double click on USB Mass Storage Device.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Click on Update Driver to continue.
6.
The Upgrade Device Driver Wizard will appear. Click on Next to continue.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
Select Display a list of the known drivers for this device so that I can
choose a specific driver. Click on Next to continue.
8.
Select Show compatible hardware and click Have Disk to continue.
9.
Click Browse to locate the driver on the Driver CD (e.g., D:\Win2000,
where “D” is the CD-ROM drive). Click on OK to continue.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Select ScanLogic Corp. in Manufacturers column. Click on Next to
continue.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Click on Next to continue.
12. Click on Finish to complete the driver upgrade.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Click on Close to close the window.
Driver Installation for Windows Me/Windows XP
Upon completion of hardware setup, Windows Me or Windows XP will auto
detect your 3-in-1 Card Reader/Writer and install the default driver as USB
Mass Storage Device. Your 3-in-1 Card Reader/Writer is ready for use. You
can use your storage media and the 3-in-1 Card Reader/Writer like Removable
Disks to transfer data to/from your computer.
Note: To Safely Remove the 3-in-1 Card
Reader/Writer in Windows Me, Windows
2000, or WindowsXP
1.
Right click on the green arrow icon
in the system tray.
2.
Unplug or eject hardware pop-up menu will appear. Click to enter the
Unplug or Eject Hardware window.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Select ScanLogic USB Mass Storage Device and click on Stop to
continue.
4.
The Stop a Hardware device window will appear. Click on OK.
5.
The Safe To Remove Hardware window will appear. Click on OK.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
The 3-in-1 Card Reader/Writer is ready to be removed.
Driver Installation for Mac OS 8.6 or Older
1.
2.
Insert the Driver CD into the CD-ROM drive of your computer.
TRANSCEND icon will appear. Find the install icon in TRANSCEND\OS
8.6 OR OLDER and double click on it.
3.
Restart your computer.
Driver Installation for Mac OS 9.0 or Later
1.
2.
Insert the Driver CD into the CD-ROM drive of your computer.
TRANSCEND icon will appear. Find the install icon in TRANSCEND\OS
9.0 OR LATER and double click on it.
3.
Restart your computer.
Warnings
1. To avoid improper shutdown, never remove a memory card or one of the
USB cable connectors while data transmission is occurring. If you can
open the file from the new location, then transmission is complete.
2.
To function well, never connect the USB cable directly into a Mac’s
keyboard.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power supply
Sockets
DC 5V from USB port
CompactFlash Card Type I/II,
SmartMedia Card, and
IBM Microdrive
LED Indicators
Red:
Green: Data traffic for
CompactFlash Card or
Power on
IBM Microdrive
Orange: Data traffic for
SmartMedia Card
Operating Temperature
Storage Temperature
Humidity
0ºC ~ 65ºC
-20ºC ~ 70ºC
0% ~ 80% RH
FCC Class B, CE, BSMI
71 x 63 x 17 mm
41 g
Emission/Safety
Dimensions
Weight
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3-in-1 Card Reader/Writer Limited Warranty
“Above and beyond” is the standard we set ourselves for customer service at
Transcend. We consistently position ourselves to be significantly above the
industry norm. It’s all part of our commitment to Customer Satisfaction.
All Transcend Information, Inc. (Transcend) products are warranted and tested to be
free from defects in material and workmanship and to conform to the published
specifications. Should your Transcend 3-in-1 Card Reader/Writer malfunction during
normal use in its recommended environment due to improper workmanship or
materials within the warranty period, Transcend will repair or replace your product with
a comparable product. This warranty is subject to the conditions and limitations set
forth herein.
Duration of Warranty: The Transcend 3-in-1 Card Reader/Writer is covered by this
warranty for a period of five (5) years from the date of purchase. Transcend will
inspect the product and make the determination as to whether the product is eligible
for repair or replacement. The decision by Transcend regarding eligibility of the
product for repair or replacement will be final and binding. Transcend reserves the
right to provide a functionally equivalent refurbished replacement product.
Limitations: This warranty does not apply to products that fail due to accident, abuse,
mishandling, improper installation, alteration, acts of nature, improper usage, or
problems with electrical power. The Transcend 3-in-1 Card Reader/Writer must be
used with devices that conform to the recommended industry standards. Transcend
will not be liable for damages resulting from a third party device that causes the
Transcend product to fail. Transcend shall in no event be liable for any consequential,
indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or
interference with business relationships as a result of lost data. Transcend is also not
responsible for damage or failure of any third party equipment, even if Transcend has
been advised of the possibility. This limitation does not apply to the extent that it is
illegal or unenforceable under applicable law.
Disclaimer: The foregoing limited warranty is exclusive, with no other warranties,
implied or statutory, including, but not limited to any implied warranty of
merchantability or fitness for a particular purpose. This warranty is not affected in any
part by Transcend providing technical support or advice.
Transcend Information, Inc.
The Transcend logo is a registered trademark of Transcend Information, Inc.
*All logos and marks are trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|