USB
128MB-256MB JetFlash™
User’s Manual
P/N TS128/256MJF-WL
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you very much for purchasing Transcend’s Wireless LAN JetFlash™. This small device is
more than a USB Flash Drive. It combines a USB Flash Drive with an IEEE802.11b Wireless LAN
(WLAN) function. Via a USB connection, it can expedite exchanging huge amounts of data
between desktop or laptop computers. With the WLAN function, you can surf the Internet freely
from a wireless network. In addition, JetFlash’s mobility, strong data retention ability, and
impressive appearance will provide you with a brand-new data storage experience.
Package Contents
Your JetFlash package includes the following items:
•
•
•
•
•
•
JetFlash
Neck Strap
Driver CD
USB Adapter
USB Extension Cable
Quick Installation Guide
Features
•
•
•
•
•
•
•
Compliant with USB specification 1.1, True Plug and Play
Compliant with IEEE802.11b standard for 2.4 GHz Wireless LAN
High-speed wireless connection up to 11 Mbps
Peer-to-peer communication without an Access Point
Solid design with an integrated internal antenna
No external power or battery needed
LED lights indicate the usage status of JetFlash
System Requirements
•
•
•
Hardware: Desktop or notebook computer with a USB port
Operating System: Windows® 98SE, Windows® Me, Windows® 2000 or Windows® XP
IEEE802.11b compliant systems constructed by Access Points
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Switch
When the switch is set to the “ON” position, you can write/read data to/from your JetFlash and
simultaneously use it for wireless applications. When the switch is set to the “OFF” position, you
can write/read data to/from your JetFlash, but the wireless function is disabled. Please set the
switch to the “ON” position before using the Wireless LAN function of your JetFlash.
LED Lights
WLAN LED
(Blue)
DATA LED
(Green)
Status
Off
Off
Off
Standby
Blinking
Data transfer
JetFlash is searching for an Access Point to
connect to a wireless network
Blinking
Blinking
Off
JetFlash is searching for an Access Point to
connect to a wireless network and there is data
transferring to and from the JetFlash
Blinking
Solid
Solid
Off
Wireless connection is established
Wireless connection is established and there is
data transferring to and from the JetFlash
Blinking
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Storage Function
Driver Installation for Windows 98SE
1. Drivers are required for Windows 98SE. Drivers will also be required for the WLAN function.
(see Wireless LAN Function section). Insert the Driver CD into the CD-ROM (Auto-Run
supported). Select the Win98 Driver button.
2. Select 98 Driver Install to continue.
3. After the drivers are installed, the “DRVSETUP2” dialogue window will appear. Select OK to
continue.
4. Plug your JetFlash into an available USB port. Your computer will automatically detect the
new device. Two new Removable Disk drives with newly assigned drive letters will appear
in the My Computer window.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver Installation for Windows Me, 2000, and XP
No drivers are required. These Windows operating systems have built-in drivers to support the
data portion of your JetFlash. Drivers will be required for the WLAN function (see Wireless LAN
Function section). Simply plug your JetFlash into an available USB port, and Windows will install
the files needed to use it as an external hard drive. Two new Removable Disk drives with newly
assigned drive letters will appear in the My Computer window.
□
Warning
To prevent loss of data and/or damage to your JetFlash, NEVER remove JetFlash
from a device while the DATA LED is blinking.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless LAN Function
The WLAN Utility is JetFlash’s management software. You must install the WLAN Utility found
on the Driver CD to enable the WLAN Function. Before installing the WLAN Utility, verify that the
switch is set to the “ON” position and carefully read the following steps.
Install the WLAN Utility
1. Insert the Driver CD into the CD-ROM (Auto-Run supported). Select the WLAN Utility button.
2. Select Next.
3. Select Yes.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Next.
™ You can select Browse to choose the folder destination.
5. Select Next.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
™ You can rename the program folder name.
6. The Question window will appear. Select Yes to add a program shortcut on your desktop
(recommended).
7. Select Finish to complete the installation. (In Windows XP, you must complete steps
8-10 and disable the Windows XP Zero-Configuration.)
™ The Operating system may request you to insert the original Windows CD, add necessary
protocols, or edit networking settings. Follow the on-screen instructions or ask your IT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
personnel to assist you to complete the installation.
8. From the Start Menu, go to Settings and select Network Connections.
9. Right-click Wireless Network Connection (this will be your JetFlash), and select Properties.
10. Select the Wireless Networks tab, and verify the check box “Use Windows to configure my
wireless network settings” is clear, and then Select OK.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
™ You can also use the KU8-M zip file in the second partition of your JetFlash. This zip file
is the compressed files of the WLAN Utility. After uncompressing it, run the Setup.exe
file inside and follow the above-mentioned steps to complete the installation.
Execute the WLAN Utility
1. Verify that you have installed the WLAN Utility application and the switch is set to the “ON”
position.
2. Plug your JetFlash into an available USB port on your computer and double-click the IEEE
802.11b WLAN Utility (USB) shortcut on your desktop.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The IEEE 802.11b WLAN Utility (USB) window will appear.
™ One of following signal icons will appear in the system tray (bottom right corner) after the
WLAN Utility has executed.
•
•
•
(Green): Connected
(Yellow): Low Quality
(Red): Disconnected
™ You can right-click the signal icon, and select Exit to close the IEEE 802.11b WLAN
Utility (USB) window, or select radio off to disable the Wireless LAN function.
Connect to an Access Point (Infrastructure Mode)
Follow the procedures below to connect with an Access Point:
1. Execute the WLAN Utility.
2. Select the Setting tab in the IEEE 802.11b WLAN Utility (USB) window.
3. Select Infrastructure as the Network Type.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select or type in the SSID you want to use (see picture below for an example). The SSID
must match the one used by the Access Point.
™ SSID (Service Set Identifier) is the group name that will be shared by all the members of
the wireless network. You can only connect to an Access Point (AP) that uses the same
SSID.
5. Select Apply and then OK to finish.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
™ Channel is not active in Infrastructure Mode.
™ After the values of Computer Name, SSID, Network Type, Channel and Country are set,
you can type in a name in the Profiles column and select Apply to save the settings.
Profiles will allow you to store a maximum of five sets.
™ You can select the Site Survey tab in the IEEE 802.11b WLAN Utility (USB) window to
display all of the Access Points within communication range and double-click on one of
them to connect.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect without an Access Point (Ad Hoc Mode)
If you want to communicate with the other wireless devices directly (peer to peer) without using an
Access Point, you must select Ad Hoc mode. Follow the procedures below to activate Ad Hoc
Mode:
1. Execute the WLAN Utility.
2. Select the Setting tab in the IEEE 802.11b WLAN Utility (USB) window.
3. Select 802.11 Ad Hoc as the Network Type.
4. Select or type in the SSID, Country, and Channel.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Every member of the peer-to-peer network must select the same SSID and channel.
5. Select Apply.
6. Select OK to activate 802.11 Ad Hoc Mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Enable Encryption
You can enhance the security of network by enabling the encryption. Follow the procedures
below to activate encryption.
1. Execute the WLAN Utility.
2. Select the Setting tab and then select Advance.
3. From the WEP Required Mode drop-down menu box, choose either 64 bits (ASCII), 128 bits
(ASCII), 64 bits, or 128 bits, then type in the WEP keys.
™
You must type in the exact same WEP Key(s) that the network or access point uses.
a. If Manual 64 bits (ASCII) is selected, enter the 5-digit WEP Key(s).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
b. If Manual 128 bits (ASCII) is selected, enter the 13-digit WEP Key(s).
c. If Manual 64 bits is selected, enter the 10-digit WEP Key(s).
d. If Manual 128 bits is selected, enter a 26-digit WEP Key.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Apply to finish.
Setting the Transmission Rate
JetFlash supports four kinds of transmission rates. You can follow the procedures below to set
the transmission rate.
1. Execute the WLAN Utility.
2. Select the Setting tab and then select Advance.
3. Select one of following transmission rates and then select Apply to set the transmission rate.
•
•
•
•
Fully Auto (Default)
Fixed 11Mbps
Fixed 5.5Mbps
Auto 1 or 2Mbps
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Saving Mode
JetFlash supports Power Saving Mode. You can follow the procedures below to enable the Power
Saving Mode.
1. Execute the WLAN Utility.
2. Select the Setting tab and then select Advance.
3. Select the Enable option in the Power Saving Mode column.
™
™
When the Power Saving Mode is enabled, JetFlash can work with low power
consumption but the throughput may slow down.
Power Saving Mode is useless in Ad Hoc Mode.
LAN Status
Select the LAN Status tab in the IEEE802.11b WLAN Utility (USB) window to see information
18
Download from Www.Somanuals.com. All Manuals Search And Download.
about your wireless connection.
The SSID and MAC information of the network or access point to which your computer is
connected will appear on the screen. Also, the Signal Quality and Signal Strength will be
displayed.
Select Rescan to refresh the display and to detect if there are other available networks. You may
be able to connect to any of the other available networks displayed. Encryption may prevent you
from connecting to one of the other networks.
Link Information
Select the Link Information tab in the IEEE 802.11b WLAN Utility (USB) window to display the
Current Channel, Current Transmission Rate, Own MAC Address, Current Connection State,
Wireless Network Adapter IP Address, Wireless Network Adapter Subnet Mask, and Wireless
Network Adapter Default Gateway.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagnostic
To view any errors in the hardware, firmware, or software of your JetFlash, select the Diagnostic
tab in the IEEE 802.11b WLAN Utility (USB) window and select Start Diagnostic. If any error
occurs, you can select View Error Details to view the detailed information.
About Version
You can select the About tab in the IEEE 802.11b WLAN Utility(USB) window to see the version
of the Firmware, Driver and Utility.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Safely Remove JetFlash
Remove JetFlash in Windows 98SE
Unplug JetFlash from your system directly when data is not transferring.
Remove JetFlash in Windows Me
1. Select the
icon in the system tray.
2. The Unplug or Eject Hardware pop-up menu will appear. Select to continue.
3. The Unplug or Eject Hardware window will appear. Select USB Disk and then select Stop
to continue.
4. The Safe To Remove Hardware window will appear. Select OK to continue.
5. Select USB Disk and then select Stop to continue.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
6. The Safe To Remove Hardware window will appear again. Select OK to complete. You
may now safely unplug your JetFlash from your computer.
Remove JetFlash in Windows 2000
1. Select the
icon in the system tray.
2. The Unplug or eject hardware pop-up menu will appear. Select to continue.
3. The Unplug or eject hardware window will appear. Select USB Mass Storage Device and
then select Stop to continue.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The Safe To Remove Hardware window will appear. Select OK to continue.
5. Select WLAN miniUSB Adapter and select Stop to continue.
6. The Safe To Remove Hardware window will appear. Select OK to complete. You may now
safely unplug your JetFlash from your computer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove JetFlash in Windows XP
1. Select the
icon in the system tray.
2. The Safely Remove Hardware pop-up menu will appear. Select to continue.
3. The Safely Remove Hardware window will appear. Select USB Mass Storage Device and
then select Stop to continue.
4. The Safe To Remove Hardware message balloon will appear. You may now safely unplug
your JetFlash from your computer.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstall WLAN Utility
1. Safely remove your JetFlash (see previous section).
2. Select the
button on the Task Bar, go to Settings and then select Control
Panel.
3. Double-click the Add or Remove Programs icon.
4. Select the IEEE802.11b WLAN Utility and select Change or Remove Programs to continue.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Follow the InstallShield Wizard and select Remove to complete the un-installation.
6. Select Finish when the un-installation has completed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: Why doesn’t the driver CD Auto-Run after it is inserted into the CD-ROM drive in Windows?
A1: This problem usually occurs because the Auto-Insert function of the CD-ROM drive is
disabled. Please enter the Device Manager in Control Panel and enable the Auto-Insert
function of the CD-ROM drive. Alternatively, you can execute the JetFlash.EXE in the
driver CD manually.
Q2: Why isn’t my operating system detecting JetFlash after I’ve plugged it into the USB port of
my computer?
A2: Please check following:
1. Is JetFlash properly connected to the USB port? If not, unplug it and plug it in again.
2. Is the USB port enabled? If not, refer the user’s manual of your computer (or
motherboard) to enable it.
3. Follow the procedures below to verify if the Driver is installed properly.
™ In Windows 98SE:
a. Right-click the My Computer icon on the desktop and the select Properties.
b. Select Device Manager tab and double-click Network adapters. Select the
WLAN miniUSB Adapter and then select Properties.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
c. If an error message appears in the Device Status window, select Remove.
d. Select OK to confirm the device removal.
e. Select Yes to restart your computer and refer to the “Driver Installation for
Windows 98SE” section to re-install the Win98 Driver.
™ In Windows Me:
a. Right-click the My Computer icon on the desktop and select Properties.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Select the Device Manager tab and double-click Network adapters. Select the
WLAN miniUSB Adapter and right-click Properties.
c. If an error message appears in the Device Status window, select Remove.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
d. Select OK to confirm the device removal.
e. Select Yes to restart your computer and re-insert your JetFlash.
™ In Windows 2000:
a. Right-click the My Computer icon on the desktop and select Properties.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Select Hardware tab and then select Device Manager.
c. Double-click the Network adapters. Right-click the WLAN miniUSB Adapter and
then select Properties.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
d. If an error message appears in the Device Status window, right-click WLAN
miniUSB Adapter and then select Uninstall.
e. Select OK to confirm the device removal.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
f. Restart your computer and re-insert your JetFlash.
™ In Windows XP:
a. Select the
button on the Task Bar, go to Settings and then select
Control Panel.
b. Double-click the System icon.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Select Hardware tab and then select Device Manager.
d. Double-click the Network adapters. Right-click WLAN miniUSB Adapter and then
select Properties.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
e. If an error message appears in the Device Status window, right-click WLAN
miniUSB Adapter and select Uninstall.
f. Restart your computer and re-insert your JetFlash.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
•
•
•
•
•
Host Interface:
Standard:
USB 1.1
IEEE802.11b
Dimension:
26 (W) x 86 (L) x 14 (H) mm
27g
Weight:
WLAN Frequency Range:
2.4-2.4835 GHz
2.497GHz (14 Channel)
Indoor: 35-100m @ 11Mbps
Outdoor: 300m @ 11Mbps
US/Canada: 11 (1-11)
•
•
WLAN Operation Range:
WLAN Channels Support:
Europe: 13 (1-13)
France: 4 (10-13)
Japan: 14 (1-14)
•
•
WLAN Transmission Rate:
Modulation Technique:
11Mbps, 5.5Mbps, 2Mbps, 1Mbps, Auto-Rate
DSSS (Direct Sequence Spread Spectrum) with BPSK
(1Mbps), QPSK (2Mbps), and CCK (5.5Mbps and
11Mbps)
•
•
•
Antenna:
Embedded PIFA antenna
64-bit, 128-bit WEP encryption
@PER < 0.08
Wireless Security:
RF Receiver Sensitivity:
11Mbps < -82dBm
5.5Mbps < -86dBm
2Mbps < -88dBm
1Mbps < -90dBm
•
•
Power Consumption:
Certificates:
Transmission mode: 205mA (Typical)
Receives mode: 190mA (Typical)
Idle mode: 173mA (Typical)
Power Saving Idle mode: 30mA (Typical)
CE, FCC, Wi-Fi, TELEC
Ordering Information
Memory Size
128MB
256MB
Transcend P/N
TS128MJF-WL
TS256MJF-WL
36
Download from Www.Somanuals.com. All Manuals Search And Download.
JetFlash Limited Warranty
“Above and beyond” is the standard we set ourselves for customer service at Transcend.
We consistently position ourselves to be significantly above the industry norm. It’s all part
of our commitment to Customer Satisfaction.
All Transcend Information, Inc. (Transcend) products are warranted and tested to be free from
defects in material and workmanship and to conform to the published specifications. Should your
Transcend JetFlash malfunction during normal use in its recommended environment due to
improper workmanship or materials within the warranty period, Transcend will repair or replace
your product with a comparable product. This warranty is subject to the conditions and limitations
set forth herein.
Duration of Warranty: Transcend JetFlash are covered by this warranty for a period of two (2)
years from the date of purchase. Transcend will inspect the product and make the determination as
to whether the product is eligible for repair or replacement. The decision by Transcend regarding
eligibility of the product for repair or replacement will be final and binding. Transcend reserves the
right to provide a functionally equivalent refurbished replacement product.
Limitations: This warranty does not apply to products that fail due to accident, abuse, mishandling,
improper installation, alteration, and acts of nature, improper usage, or problems with electrical
power. Transcend JetFlash must be used with devices that conform to the recommended industry
standards. Transcend will not be liable for damages resulting from a third party device that causes
the Transcend product to fail. Transcend shall in no event be liable for any consequential, indirect,
or incidental damages, lost profits, lost business investments, lost goodwill, or interference with
business relationships as a result of lost data. Transcend is also not responsible for damage or
failure of any third party equipment, even if Transcend has been advised of the possibility. This
limitation does not apply to the extent that it is illegal or unenforceable under applicable law.
Disclaimer: The foregoing limited warranty is exclusive, with no other warranties, implied or
statutory, including, but not limited to any implied warranty of merchantability or fitness for a
particular purpose. This warranty is not affected in any part by Transcend providing technical
support or advice.
Online Registration: To expedite warranty service, please register your Transcend Product within
30 days of purchase.
Register online at http://www.transcendusa.com/registration
Transcend Information, Inc.
The Transcend logo is a registered trademark of Transcend Information, Inc.
*All logos and marks are trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
|