LCD COLOR TV
LCD-2300VT
LCD-2700VT
LCD-3018VT
LCD-3200VT
LCD-4000VT
LCD-4200VT
TOTEVISION SERVICE CENTER 1319 Dexter
Avenue N.#020,Seattle,Wa98109
TELL: (206) 623-6000 FAX: (206) 623-6609
P/N:7042301301 V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION SAFETY
Caution：To avoid fire and electric
shocks, do not expose this
product under damp or humid
condition and make sure the
plug is fully plugged in at all time.
Warning:Never open the housing of the LCD
display. When the housing is opened,
there is a danger of injury from
electric shock.There is no
component that can be replaced by
users. Please contact the service
personnels and replace with
manufacturer appointed components.
Disposal: Due to the environmental concerns,
please refer to your local
authorized organization or
electronics industry society before
you dispose this product. Please
Informations.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CUSTOMERS
Thank you for purchasing this product. Please
read through the instructions and follow the steps
in order to achieve the maximum reliability.
Please keep this manual handy and close to your
LCD display after reading.
SAFETY & PRECAUTIONS
◎Manual Guide--Please read through user's
manual before operating this
product.
◎Instructions--Please follow and be aware
of cautions and warnings.
◎Follow Steps--Please follow the operation
procedures.
◎Socket Outlet--Please use standard socket
outlet to avoid damages to
the LCD display.
◎Power Source--This product has to operate with
correct power source shown on
label.
◎Power Cord Protection--Avoid tangling or
placing objects on the power cord.
◎Over-loading--Avoid AC power over-loading,
which may lead to fire or electric
shock.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
◎Do not insert any objects through the slots and
openings of the LCD display.This may lead to
an electrical short-circuit or even cause fire
and results in damages to your LCD display
◎Repair--Please unplug the power cord and contact
distributors or qualified repair personnels if
any of the following situations have happened.
1.Power cord is damaged
2.Objects have been inserted through the slots and
openings of the display.
3.Product is under humid condition or liquid
leakages on to the display.
4.Product cannot function normally, or cannot
operate.
5.Product was dropped or damaged
Note：When using AV signals (e.g DVD, VCR..), Please
check the input source if the screen appears glittering
or having bad signals.
For example, cables are correctly connected and DVD
player output setting is the same as TV resolution
setting. (Resolution is under 480i or 576i etc.)
◎Parts Replacement--If any parts need to be replaced,
please contact the service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
◎Wall Mounting--Please use correct wall mount and follow
instructions when installing the display
onto the wall.
◎Cleaning--Unplug power cord beforehand.Please use
dry and soft sponge to clean the screen
surface.Do not use diluted acid.
◎Humidity--Keep this product away from moisture or high
humidity area.
◎Placement--Place this product on a stable and vibration
free surface in order to avoid the LCD
display from falling.
◎Ventilation--Please never cover or block openings and
slots of the display.This may cause the
display to over-heat and reduced it's life
time.Please allow some space for
ventilation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
◎Away from heat sources--Keep this product away from heat
sources such as direct exposure to sunlight, heater and stove,
etc.This would avoid structure distortion or machine break down.
◎When switched off, the LCD display can be stored comfortably
between -4℉ to 140℉(-20℃ to 60℃）
◎Unplug from the socket outlet if the LCD Display is not intended
to be used for a long period of time.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
User Menu(*1)
Remote Control(*1)
AAA Batteries(*2)
VGA Cable(*1)
Power Cable(*1)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
1.
2.
Auto-Adjustment:It helps users to
adjust the display into appropriate
setup.
Contrast/Brightness:Users are able to
adjust their custom setup.
3.
4.
Color Adjustment:Users are able to
adjust their custom color setup.
Display Frequencies:Users can use this
function to check current horizontal
frequency,vertical frequency, phase
and resolution.
5.
Position Adjustment:Users can adjust
display's vertical and horizontal
positions.
6.
7.
Source:Allows selection from PC,DVI,
S-Video1,S-Video2,AV1,AV2,YCbCr,TV/CATV,HDTV
Menu Setting: Allows setup of OSD
language, picture position, time and
picture freeze time etc.
8.
PIP setup:
(1)PIP source:Select PIP input source
(2)PIP Ver/Horz position: Allows
adjustment of PIP positions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
23"LCD-2300VT
720
27"LCD-2700VT
766.2
30"LCD-3018VT
987.2
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Control Buttons(23".27".30") LCD-2300VT,LCD-2700VT,LCD-3018VT
89.9
(mm)
Source 目Menu
Ch
音Vol
Power
RGBJack, AudioIn(PCAudio Souce In)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPECIFICATIONS
產品尺寸規格
Model
27
23-inch.16:9 27-inch.16:9 30-inch.15:9 32-inch.16:9
30
32
40
40-inch.16:9 42-inch.16:9
23
42
Picture panel
Resolution
1280x768
1280x720
1280x768
1366x768
1280x768
1366x768
W
H
974mm
688mm
254mm
1024mm
700mm
250mm
720mm
475mm
240mm
766mm
545mm
240mm
987mm
545mm
240mm
1026mm
551mm
Dimensions
(mm)
D
240mm
HDTV compatible
Speaker
480p/480i/720p/1080i
10W + 10W
6W + 6W
8W+8W
8W+8W
AC Power Supply
View angle
AC 100-240V ,50/60 Hz
H：170, V：170
Contrast ration(type)
Response time(Tr/Tf)
Lamp life
600：1
500：1
600：1
800：1
600：1
400：1
15/10 ms
14/8 ms
10/10 ms
50,000 hours
60,000 hours
50,000 hours
Video Compatible
Remote control
NTSC/PAL/Secam
R4001
Weight(Net/Gross)
11.58/14.86Kg 13.42/16.7Kg 16.45/22.52Kg 17.0/24.3Kg
120W 125W 145W 170W
32.8/39.69Kg 36.0/45.0Kg
270W 360W
POWER COMSUMPTION
Note: No announcement for any change of design and specification.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Power Saving：Save more than 40% power compared
with CRT TV
No Radiation：No radiation wave from screen.
No Flaring Picture：No flaring picture which
may hurt users' eyes
Thinner and lighter：space saving, better for
decoration
No Static Electricity：LCD panel does not create
static electricity
Excellent Sound Effects：High performance speakers
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI-MEDIA BOX
YES
YES
MTS
Audio
Surround
S-Video
AV Input
2 SET
2 SET
TV Input
YCbCr
HDTV
1 SET
1 SET
1 SET
Connectors
VGA
Audio Input
1 SET
Audio Output
DVI
1 SET
1 SET
AV I/O Connector Video1vp-p(75)ohms
Audio0.4rms(47Kohms)
Supporting
Connectors
S-Video:Brightness:1vpp(75ohms),
Color:0.3VPP(75ohms)
〈WITH MULTI-MEDIA BOX〉
PRODUCT INSTALLATION
1.Antenna Installation
Make sure multi-media box has been
installed correctly.
Please connect antenna cable to
Multi-media box's tuner head〈ANT〉
(Refer to figure 1 on page 12)
Please do not install antenna in raining or thundering condition
Caution：Please use legal cable TV, otherwise it may
damage the product.It may also void warranty.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2.VGA Source Connection:
Please switch off PC and TV. Connect VGA
cable to display's D-Sub connector, and
connect the other head of cable to PC VGA
Output
3.DVI Source Connection:
Use DVI cable to connect with PC and TV
You can use this display to play with a Video player, Video
Camera, DVD Player, and TV Game consoles etc.
Please connect to Y.Cb.Cr (Digital signals)
if the external devices has Y.Cb.Cr outputs
Please connect to correct video and audio
jacks with external devices.
This TV provides audio output jack（Audio OUT) which allows
connection with external speakers or stereo.
Please purchase standard signal cables
Please switch off the TV before setting up additional equipments.
4.High Definition TV (HDTV)source connection:
This TV provides one Y.Cb.Cr-VGA cable and one
audio cable.for HDTV, please connect
Y.Cb.Cr-VGA cable to Y.Cb.Cr jacks, and connect
the other head of cable to D-SUB connector.
For HDTV audio, please connect the audio cable
to PC Audio In jack at the back of the TV.
5.Speaker Jack(Audio Out):
Use for external speakers or stereo.
6.Power Connection:
Please use correct socket outlet.
Please unplug the power cord if theTV will not be used for a
long period of time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SOURCE INPUT CONNECTORS
Multi-media box
INPUT1
INPUT2
Connectors
Description
Video Input is using Video Jack(Yellow RCA Jack)or S-Video
Jack. Audio Input is using White RCA Jack (Left) and Red RCA
Jack (Right)
1
2
AV.S-Video In
Input 1、Input 2
The level of audio output cannot be changed using the volume,
treble and bass controls on your display.This connector should
be used with an external audio amplifier that can be used to
control the volume
3
4
Audio Out
ANT
Receive TV Source
SDTV Input
HDTV Input
Support 480i. 576i. Signal
5
6
Support 480P. 576P.720P and 1080i Signal
20
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON/OFF
1.Press POWER button from key pad (or remote control),the
red light will turn green.This means the TV has been
switched on. The picture will takes about 3 seconds to show
on the screen.
2.Press POWER button again to switch off
the TV. Green light will turn back to red
Warning：Electrical currents may still remain
in TV after power is switched off,please
unplug the power cord if it is not intended to be
used for a long period of time.
TV/AUDIO/PC SELECTION
Key Pad
Vol
Source
Menu POWER
Ch
B
A
C
D
E
2
C
1.Press SOURCE
2.Sources display orders are PC DVI
Av1 Av2 YCbCr TV/CATV
button to change input source
S-Video1 S-Video2
HDTV
3.After source input has been selected, press
B 3
MENU
functions
button to set up language and other
Refer to Pg.14 for Remote Control Description
21
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
(1) Power
(2) Source:
Select source input
(3) Menu:
Select from PICTURE
PARAMETERS/AUDIO
SETTING/PICTURE IN
PICTURE/PARENTAL
CONTROLS/GENERAL
SETTINGS.Use(+)(-)to
select desired
program and press ENTER
7
E 5
D 4
to proceed. Use
and
to select function that need
to be adjusted.
VOL:
(4)
(+)for volume up and
(-)for volume down
CH:
Use CH(
channels
(5)
(6)
) to change
Exit:
Back to previous
channel or program
(7)Enter：
Under menu mode,press this key to confirm and proceed the
program or function.In TV Mode,it can be used to switch back to
the previous channel
(8)MTS/NICAM：
Switch to Mono,SAP
(9)PIP：
Switch to PIP or POP
22
Download from Www.Somanuals.com. All Manuals Search And Download.
(10)Mute:
Switch On/Off sound off function
(11)Sleep:
Set timer to 30/60/120 min.
(12)Display:
To display the imformations at top right corner
(13)Digit Buttons:
Switch to favorite channel directly by
entering the channel numbers
(14)16:9:
Switch to 4:3 or 16:9 display format
(15)Freeze:
Freeze the display image
(16)Close Caption:
Switch On/Off sub-title function
(17)Swap:
Swap input sources between main display and
sub-display
(18)PIP Source:
To show PIP function on the screen
(19)Direct Keys:
Access to PC/DVI/TV/(AV1andAV2)/(S-Video1andS-Video2)
/Y.Pb.Pr/HDTV directly
REMOTE CONTROL PRECAUTION & USAGE
Remote distance will be shorter as the
signal receiver is facing a strong light.
All impacts should be avoided
Humidity and high temperature
conditions should be avoided
Remove batteries from remote control if it
not in use for a long time
Remote control should point directly to
the TV signal receiver
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PC (RGB) MODE
IMPORTANT:
1.If PC picture interferences appeared
while RGB and antenna are connecting to the
display at the same time. This is possibly caused by
PC and display both are using different number of
plugging heads,such as 2 heads and 3 heads.
Users are adviced to use the same number of plugging heads
for both PC and display.
( )
( )
( )
Display Display
PC
PC
Display
PC
PC Mode Adjustment
Key Pad
Vol
Source
Menu POWER
Ch
B
A
C
D
B
E
3
1.Press
or
button to get Menu list
D
4
2.Use
buttons to select options
7
C
3.Use Enter
(or Source
button from remote control
button from key pad) to
confirm selected adjustment option
D
4
5
E
4.Use
Or
to proceed adjustment
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Key Pad
Remote Control
Vol
Source
Menu POWER
Ch
B
A
C
D
E
A：By using Key Pad
B：Or Remote Control
1.Channel Selection
Press Ch 5 or
button to search channels
E
2.Direct Channel Selection
Select favorite channels directly by pressing
channel numbers. For example, Ch45. Press 4
and followed by 5
3.Antenna/Cable TV Setup
Menu
CHANNEL SETTINGS
System
ANTENNA/
CABLE
4.Auto Scan
Menu
CHANNEL SETTINGS CH EDIT AUTO
5.Press POWER button to stop auto-scan process
25
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO SETTINGS
Key Pad
Vol
Source
Menu POWER
Ch
10
B
A
C
D
E
8
D 4
1.Press Vol
button,
down and "+"for volume up.
"-"for volume
B
3
2.Press MENU
to display the main menu. Use
4
Vol E
to select audio settings.
C
3.Press
7
to enter Audio Settings menu.Use
5
E
Buttons to select (Bass/Treble/Balance/MTS/Mute)
D 4
B
3
4.Press
buttons to perform adjustment. Press MENU
button to exit.
Balance：Sound Balance adjustment
Bass：Bass sound frequency adjustment
Treble：Treble sound frequency adjustment
10
5.MUTE：Press Mute button
from remote control
to switch On/Off the sound
(Refer to pg.14 for Remote Control Description)
6.MTS：Press MTS button 8 from remote control,
You are able to select fuctions of Mono,and Nicam
(Refer to pg.14 for Remote Control Description)
Note：MTS/NICAM only works in TV mode
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE PARAMETERS
BRIGHTNESS
BRIGHTNESS
50
CONTRAST
SATURATION
HUE
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
1.Press MENU
3 button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
D 4
3.Select BRIGHTNESS and press
CONTRAST
to perform adjustment.
BIRGHTNESS
50
CONTRAST
SATURATION
HUE
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
3
1.Press MENU
button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
D
4
5
E
3.Press
button to select CONTRAST and use
to adjust.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE PARAMETERS
SATURATION
BRIGHTNESS
50
CONTRAST
SATURATION
HUE
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
3
1.Press MENU
button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
D 4
5
E
3.Press
button to select SATURATION and use
to adjust.
HUE
BRIGHTNESS
CONTRAST
SATURATION
HUE
50
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
3
1.Press MENU
button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
D
4
5
E
3.Press
button to select HUE and use
to adjust.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE PARAMETERS
FLESHTONE
BRIGHTNESS
CONTRAST
SATURATION
HUE
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
3
1.Press MENU
button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
C
5
7
E
3.Press
button to select FLESHTONE press Enter
to adjust
SHARPNESS
BRIGHTNESS
50
CONTRAST
SATURATION
HUE
COLOR TEMP
FLESHTONE
SHARPNESS
BL BRIGHTNESS
B
3
1.Press MENU
button to display the main menu
C
7
2.Press Enter
button to select(PICTURE PARAMETERS) option
D
4
5
E
3.Press
button to select SHARPNESS and use
to adjust.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PC PARAMETERS
AUTO
AUTO
CLOCK
PHASE
POSITION
AUTO COLOR
YES
NO
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(PC PARAMETERS) option
C
7
3.Press Enter
button to select AUTO
D 4
4.Press Enter again and use
CLOCK
to select (YES / NO)
AUTO
CLOCK
PHASE
50
POSITION
AUTO COLOR
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
button to select(PC PARAMETERS) option
C
7
button to select CLOCK
D
4
4.Press
to adjust
30
Download from Www.Somanuals.com. All Manuals Search And Download.
PC PARAMETERS
PHASE
AUTO
CLOCK
PHASE
50
POSITION
AUTO COLOR
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(PC PARAMETERS) option
C
7
3.Press Enter
button to select PHASE
D 4
4.Press
to adjust
POSITION
AUTO
CLOCK
PHASE
POSITION
AUTO COLOR
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
4.Press Enter again and use
button to select(PC PARAMETERS) option
5
E
C
7
button then press
to select POSITION
to adjust
D
4
5
E
and
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PC PARAMETERS
AUTO COLOR
AUTO
CLOCK
PHASE
POSITION
AUTO COLOR
YES
NO
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(PC PARAMETERS) option
BL BRIGHTNESS
C
7
5
E
3.Press Enter
button then
to select AUTO COLOR
D 4
4.Press Enter again and use
to select (YES / NO)
AUDIO SETTINGS
BASS
50
TREBLE
BALANCE
MONO
SAP
MTS
MUTE
STEREO
EXT SPEAKER
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
button to select(AUDIO SETTINGS) option
C
7
5
E
4
3.Press Enter
button then
to select required option
D
E 5
4.Press Enter again and use
or
to adjust
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-IN-PICTURE
PIP POSITION
PIP SIZE
OFF
SMALL
LARGE
PBP
PIP SOURCE
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
3.Press Enter
(PIP POSITION / PIP SIZE / PIP SOURCE)
button to select(PICTURE-IN- PICTURE) option
C
5
7
E
or
button to select
C
7
D 4
4.Press Enter
button and use
and
5 to select
E
(OFF / SMALL / LARGE / PBP)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-IN-PICTURE
PIP POSITION
PIP SOURCE
PIP SIZE
VGA
DVI
PIP SOURCE
S-VIDEO1
S-VIDEO2
Av1
Av2
YCbCr
TV
HDTV
1.When the main screen is display under the
VGA or HDTV mode either
(DVI-S-video1/S-video2/AV1/AV2/YCbCr/TV)is selectable for
sub-screen display.
2.(VGA and HDTV source are not viewable at the
same time)
3.When the main screen is display under the
DVI mode either
(VGA/S-video1/S-video2/AV1/AV2/YCbCr/TV/HDTV)
is selectable for sub-screen display.
4.When the main screen is display under the
S-video1/S-video2/AV1/AV2/YCbCr/TV mode either
(VGA/DVI/HDTV)is selectable for
sub-screen display.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE SOURCE SETUP
Picture source setup
Main
source
VGA DVI
Sv1 Sv2 Av1 Av2 YCbCr TV HDTV
PIP
source
VGA
DVI
Sv1
Sv2
Av1
Av2
YCbCr
TV
HDTV
Remark:
" "
Represent a playable source
" "Represent a non-playable source
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTINGS
ANTENNA AND CABLE TV SELECTION
SYSTEM
CH EDIT
ANTENNA
CABLE
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(CHANNEL SETTINGS)
C
7
3.Press Enter
button to select SYSTEM
5
E
4.Press Enter again and use
CHANNELS AUTO-SCAN
to select(ANTENNA / CABLE)
SYSTEM
CH EDIT
AUTO
ADD
DELETE
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
4.Press Enter again and use
button to select(CHANNEL SETTINGS)
C
7
5
E
button then
to select CH EDIT
5
E
to select(AUTO/ADD/DELETE)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL CONTROLS
LOCK MENU
MPAA RATING
TV PG RATING
Please Enter the Password:
CODE CHANGE
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
3.Press Enter
4.Press Enter again and use
button to select(PARENTAL CONTROLS)
C
7
5
E
button then
to select required option
D 4
5
E
and number button to adjust.
5.Press default password was"1111",you can change your password
with the icom "code change".
GENERAL SETTINGS
OSD TIMEOUT
OSD TIMEOUT
10 SEC
LANGUAGE
30 SEC
1 MIN
SLEEP TIMER
I/P INFO
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
4.Press Enter again and use
button to select(GENERAL SETTINGS)
C
7
button to select OSD TIMEOUT
E 5
37
to select(10SEC/30SEC/1MIN)
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTINGS
LANGUAGE
OSD TIMEOUT
LANGUAGE
ENGLISH
SLEEP TIMER
I/P INFO
中文
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(GENERAL SETTINGS)
C
7
5
E
5
3.Press Enter
button then
to select required option
E
4.Press Enter again and use
(ENGLISH/CHINESE 中文.)
to select
SLEEP TIMER
OSD TIMEOUT
LANGUAGE
OFF
30 MIN
60 MIN
SLEEP TIMER
I/P INFO
120 MIN
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
button to select(GENERAL SETTINGS)
C
7
5
E
button then
to select SLEEP TIMER
E 5
38
4.Press Enter again and use
to select (OFF / 30MIN / 60MIN
/ 120MIN)
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTINGS
I/P INFO
OSD TIMEOUT
LANGUAGE
SOURCE
AV
720x240
RESOLUTION
SLEEP TIMER
I/P INFO
15KHZ
59KHZ
H SYNC
V SYNC
RESET
TRANSPARENCY
DEINTERLACE
B
1.Press MENU
3 button to display the main menu
4
E
2.Press
button to select(GENERAL SETTINGS)
C
7
5
E
3.Press Enter
on screen
then
and the information will display
RESET
OSD TIMEOUT
LANGUAGE
NO
YES
SLEEP TIMER
I/P INFO
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
3.Press Enter
button to select(GENERAL SETTINGS)
C
7
5
E
4
button then
to select RESET
D
4.Press Enter again and use
to select (YES / NO)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTINGS
TRANSPARENCY
OSD TIMEOUT
LANGUAGE
50
SLEEP TIMER
I/P INFO
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
4
E
2.Press
button to select(GENERAL SETTINGS)
C
7
5
E
3.Press Enter
button then
to select TRANSPARENCY
D 4
4.Press and use
DEINTERLACE
to adjust
OSD TIMEOUT
LANGUAGE
LOW
MADI
SLEEP TIMER
MOTION
MEDUUM
HIGH
I/P INFO
RESET
TRANSPARENCY
DEINTERLACE
B
3
1.Press MENU
button to display the main menu
E 4
2.Press
button to select(GENERAL SETTINGS)
C
C
7
7
5
E
3.Press Enter
4.Press Enter
button then
to select DEINTERLACE
5
E
then
to select MOTION
5
E
5.Press Enter again then
to select (LOW / MEDUUM / HIGH)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTINGS
DEINTERLACE
1.MADI(Motion Adaptire De-interlacing)
Video processing with this
de-interlacing,recommend in TV,AV
and S-video mode.
2.Motion:
Video processing in motion picture.
Low: Exhibits very little fickering.
Medium: Between low and high.
High: Minimize or eliminate the feathering
artifact.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE YEAR LIMITED WARRANTY
ToteVision warrants to the original purchaser that this product is free from defects in workmanship and material under normal use and
conditions for a period of 1 year from the date of original purchase,subject to the limitations below. Should service be required by
reason of any defect or malfunction during the warranty period,ToteVision will repair or at its discretion replace this product,, without
charge(except for a $15.00 charge for handling,packing,return shipping,and subject to verification of the defect or malfunction),
upon delivery of this product to the Factory Service Center listed below with proof of date of purchase.During the warranty period
ToteVision will repair or replace,free of charge,defective units WHICH ARE NOT DEFECTIVE DUE TO ORDINARY WEAR
AND TEAR, USER ABUSE, OR OTHER CAUSES NOT ARISING OUT OF MANUFACTURER'S DEFECTS IN
MATERIALS OR WORKMANSHIP.
Before returning this product for service:
1. If it is necessary to pack the unit in other than original carton and protectors,please insure proper packaging for good protection.
2. Enclose a photocopy of your dated sales receipt, credit card statement, or other proof of the date of purchase, a description of your
complaint, your name, address and day time telephone number. (Do not use P.O Box numbers since UPS cannot deliver to P.O.
Boxes.) Your warranty registration information must be on file in our office as a method of identification. If Proof of original
ownership is not in our records, the repairs will be treated as"out-of-warranty" and your unit will be returned to you C.O.D. For repair
and handling charges.
3. For"In Warranty repairs" enclose a check or money order payable to the order of Tote Vision for the sum of $15.00 for return
postage and handling.
4. Ship the unit prepaid to the Factory Service Center listed below.
5. If your unit needs service after the warranty period has expired,ship it prepaid and insured to the Factory Service Center below.
Enclose a description of your complaint:your name,company name,address,and day time telephone number,You will be advisd of
estimated repair charges.
NOTE:This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover:
(i ) products which have been damaged by negligence,misuse, accidents,abuse,acts of God, or units which have been modified or
repaired by unauthorized persons,
(ii ) cracked or broken units damaged by excessive heat or cold, or units exposed to excessive UV light.
(iii ) products which havetheir serial numbers removed,altered or rendered illegible,
(iv ) products that have been in constant use (24 hours per day, 7 days per week)that have cold cathode florescent tubes(CCFT) that
do not provide sufficient illumination,
(v ) the cost of shipping this product to the Factory Service Center and its return to you.
No warranty,expressed or implied,as to merchantability or fitness for a particular use is made beyond this Limited Warranty.
Tote Vision will not be liable for incidental or consequential damages or lost profits arising form product defects or malfunctions. This
warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the original
purchaser.Any applicable implied warranties are also limited to 1 year and Tote Vision will not be liable for consequential damages.
(Some states do no allow limitations on implied warranties or exclusions of consequential damages,so that thes restrictions may not
apply to you.) This warranty gives you specific legal rights,and you may also have other rights which vary from state to state.
As a precondition to receiving any of the benefits of this limited warranty,your completed warranty registration information
must be on file in our office. IF YOUR INFORMATION IS NOT ON FILE WITH US, ALL WARRANTY CLAIMS WILL BE
DENIED. TO PROTECT YOUR WARRANTY, MAIL YOUR REGISTRATION INFORMATION TODAY! Submission of a unit
determined not defective will result in a charge to you for testing and handling the unit. Thoroughly test your unit before submitting it
for warranty claim repair.
Send unit to :
TOTEVISION SERVICE CENTER 1319 Dexter Avenue N.#020,Seattle, Wa98109
For further information: call (206) 623-6000 fax (206) 623-6609
WARRANTY REGISTRATION
Protect your Warranty by completing and mailing this form to : ToteVision,1319 Dexter Avenue N.# 020, Seattle, Wa98109
Model Number:
Name:
Serial Number:
Address:
City:
State:
Zip:
Telephone number: (
Dealer:
)
Dealer City:
State:
Download from Www.Somanuals.com. All Manuals Search And Download.
|