OWNER’S MANUAL
FULLY AUTOMATIC
WASHING MACHINE
AW-7480EM
CONTENTS
WARNING ........................................................... 2
CAUTION ............................................................ 3
DESCRIPTION OF PARTS ................................. 3
DESCRIPTION AND OPERATION
OF PANEL PARTS .............................................. 4
RESUME FUNCTION ......................................... 4
CHILD PROOF MODE ........................................ 5
PRESET MODE .................................................. 5
HOW TO OPERATE ........................................ 6~7
SUPER SPIN DRY .............................................. 7
CUSTOM WASH CYCLES .................................. 8
LAUNDRY GUIDE ............................................... 9
MAINTENANCE ................................................ 10
INSTALLATION ........................................... 11~13
BEFORE CALLING THE SERVICEMAN .... 14~15
HANDLING METHOD FOR EMERGENCY ...... 15
SPECIFICATIONS............................................. 15
Thank you for purchasing TOSHIBA Fully Automatic
Washing Machine.
Please read this manual carefully in order to operate
•
the machine properly.
Sometimes you may find some water remaining in
•
the drainage hose at your first operation. This is
caused by the production-line test and nothing
to worry about.
6348100701 (01-Cover)
1
22/10/08, 11:12
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
CAUTION: This indicates an important item where incorrect operation may lead to injury or material damage.
Do not pull the cord when unplug the appliance.
Hold the plug body to unplug.
It can cause electrical shock or malfunctions that lead to injuries.
Do not use water with temperatures over 50°C.
Water that is too hot can cause malfunctions and deformation of the machine, which may result in electrical shock.
Do not attempt to wash or rinse waterproofed sheets, mats, or clothing.*
Doing so may cause abnormal vibration or injury during the spin cycle.
*: This includes raincoats, fishing gear (jackets and waders), ski wear, sleeping bags, etc.
Do not climb or place heavy objects on the washing machine.
Doing so may result in injury due to bending or breakage.
Pull out the power plug if you do not plan to use the machine for a long time.
Failure to do so may result in electrical shock or shorts due to deterioration of the insulation.
Do not place the hands or other objects under the washing machine while in operation.
Moving parts may cause injury.
Before use, make sure the faucet in open, and the connection with water supply hose is not loose or
leakage water.
Looseness of screws, hose connections, or other areas may cause water leakage or other damage.
The opening must not be obstructed by carpeting when the washing machine is installed on a carpet
floor.
DESCRIPTION OF PARTS
Lid
Water Intake Valve
Shower cover
Pulsator
(Hybrid Screw Type)
Softener Dispenser
Bleach Dispenser
Lint Collector
Basket (WASH/SPIN)
Hose Hanger
Power Cord
Control Panel
Power Switch
Plug
Caution:
If the supply cord is
damaged, it must
be replaced by the
manufacturer or its
service agent or a
similarly qualified
person in order to
avoid a hazard.
Adjustable Leg
Both front legs
Accessories
Drainage Hose
Water supply hose
6348100701 (02-06)
Drainage hose
Drainage hose band
3
3
12/11/08, 8:53 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION AND OPERATION OF PANEL PARTS
PROCESS DISPLAY
“START/HOLD” button
CHILD PROOF MODE DISPLAY
• Operating process is indicated by
flashing. Remaining process is
indicated by lightening.
• Press this pad when you want to start.
• Check this to see if the CHILD
PROOF mode is ON (lit) or
warning (flashing).
• Press this pad when you want to hold.
“POWER” button
“COURSE” button
“PRESET” button
•
•
Press this button to power off/on.
Power is automatically turned off about 15
seconds after the end of operation, or about
10 minutes later if the operation is not on.
• You can select the program
• You can set/reset the CHILD
suitable for the laundry.
• PYoRuOcOaFn smeotdthee. time until
washing finished.
WATER LEVEL
“SUPER SPIN DRY” button
“SELECT” button
Auto-Set Mode
• The water level is set linearly by adjusting to
the washing volume. If the water level is
assigned at the point with no particular
•
Select either the WASH,
RINSE, or SPIN cycle as you
desire.
• Iinndtihciastiaount,ot-hseent mthoednee, athreessteletvwealtleigrhletsveulp.
DETERGENT GUIDE
• Billuymprineassteinsgwthheen"SwTaAteRrTs/uHpOpLlyDf"inbisuhtteosn. while
water is in the wash basket, the highest
water level lights up.
• The amount of supply using the measure spoon accompanying
the compact detergent is displayed.
Button Setting
• By pressing the
button, a desired
• wIllautmerinlaetvieolncsahnifbtsetoobthtaeindeirde.ction where the
higher water level is indicated as the result of
button.
One spoonful of detergent denotes about 55L of water consumption
• pWuhsihleinugstihneg the "tub cleaning" program, the
Depending on the kind of detergents, amount of water consumption
by one spoonful changes. Adjust the detergent volume according to
the particular detergent in use.
water level will be automatically at High and
the
button cannot be used.
RESUME FUNCTION (POWER FAILURE RECOVERY)
If a power failure occurs during operation, the washer memorizes the remaining
process. After the electricity recovers, you can resume it.
1
Turn the POWER on.
ꢀ The progress and course indicators of the remaining process will be flashing,
and the buzzer sounds for 5 seconds.
2
Press the
button.
2
1
NOTE • For “PRESET MODE” , if the power failure occurs before the machine starts
operating, the machine will cancel the preset time. Therefore, you have to
reset the time.
• Press the
button to clear the remaining process.
4
6348100701 (02-06)
4
22/10/08, 11:13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILD PROOF MODE (if you have small children)
CHILD PROOF mode
This model is equipped with CHILD PROOF mode. After this mode is set to ON, the washer will alarm you if the lid is opened
during operation. If you find accident such as falling of child into wash tub, please take necessary safety action
urgently.
If there is small children who requires attention, set this mode ON.
WARNING: Pay attention to small children. Do not leave the lid opened. Do not leave the washer filled with water. Never allow
children to look into the basket or play around the washer. Do not place the stand or box etc. near the washer.
HOW TO USE CHILD PROOF MODE
If the CHILD PROOF mode is set to ON and the lid is opened while the washer is in operation, it beeps the buzzer, stops water
supply and stops wash/spin operation. If there is water in the tub, the washer drains water. (The buzzer keeps beeping
alarming unexpected operation is happening).
CHILD PROOF INDICATOR
TO SET/RESET CHILD PROOF MODE
TO SET CHILD PROOF MODE:
1 With pressing “PRESET” button, press
“START/HOLD” to turn the CHILD PROOF
mode on.
* Buzzer beeps and the CHILD PROOF
indicator lights on. (Check the indicator lights
on.)
TO TURN CHILD PROOF MODE OFF:
2 With pressing “PRESET” button, press
with pressing “PRESET” button
press “START/HOLD” button
“START/HOLD” to turn the CHILD PROOF mode.
* Buzzer beeps and the CHILD PROOF
indicator turns off.
If there is small child, set this mode ON.:
if this mode is set to ON and the lid opened during operation, the
buzzer beeps, the indicator flashes, the washer stops water supply
and stops wash/spin operation, and drains water from wash tub
approximately 5 seconds of the lid opening.
TO PUT ADDITIONAL LAUNDRY/
DETERGENT:
Open the lid, throw laundry/detergent into the wash
tub and close the lid quickly. (The washer starts
draining approx. 5 seconds after the lid opening.)
• If the CHILD PROOF mode is set off temporary, do not forget to
• WturhnetnhestCarHteILdDoPpeRrOatOioFn mwoithdelidONopaegnaeidn.and the CHILD PROOF
• mThoedewoansh, ethremweamsohreizrewsillthbeeelapsstasnedttidnrgaionfsCwHatIeLrD. PROOF mode
WHEN THE WASHER IS BEEPING AND
STARTS DRAINING WATER.
Check for safety.
• TwhheenCpHoILwDerPedROofOf.F mode is set to “OFF” when shipped out from
Press POWER button to OFF.
the factory.
PRESET MODE
How to use preset mode
1 Turn the POWER on.
ꢀPut the laundry in the basket and select your favorite cycle or water level.
Set the custom wash cycle.
2 Press PRESET button for preset time.
• Change 9, 6 to off with pressing.
• 9-hour is indicated by lightening.
6-hour is indicated by flashing.
2
3
1
3 Press
button.
TO SET/RESET PRESET MODE
• Check to turn the water faucet on.
• Turn the POWER off when you want to
delete memory. If you wish to change
preset time, turn the POWER off. And then
set to new preset time.
4 Put in the detergent according to the detergent guide and then close the lid.
LIQUID DETERGENT
POWDER DETERGENT
Spread a handkerchief on the
laundry, and then put on the
detergent not to spill from the
handkerchief.
Pour the liquid detergent into the
bleach dispenser.
TO CONFIRM PRESET TIME
CAUTION
Cause by remained detergent as
follows:
• Display preset time when you open the
• wFiansishhleidd, otirmpereisssdPifRfeEreSnEtTbebtuwtteoenn. preset
and actual time with water pressure and
drain condition.
• Wet detergent.
• Wet clothes or put in detergent
directly on clothes.
5
6348100701 (02-06)
5
22/10/08, 11:13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE
Preparation
4
3
1 Set drainage hose for drain.
2 Set the water supply hose correctly.
3 Turn the water faucet on.
2
• Make sure that there are no sign of water leakage at water tap or inlet
valve.
1
4 Connect the power plug.
"REGULAR" "SOAK" "SPEED" "HEAVY" "DELICATE"
1 Turn the POWER on.
• Turn the POWER on, "REGULAR" cycle and "CONDENSED WASH"
is selected automatically.
CONDENSED WASH
The washer starts flowing water at the low level to absorb the concen-
trated detergent into the laundry in order to remove the dirt efficiently.
2
3
1
2 Put the laundry in the basket.
"REGULAR" cycle
• In case of much laundry, soak the laundry completely in the water to
Water level, water current and time are auto-
matically selected according to the quantity
and type of laundry detected automatically.
Put the laundry evenly and confirmly.
prevent the splash on feeding water.
• In case of selecting "SUPER SPIN DRY", please see page 7 for
details.
If it is not, the lower water level may be set.
3 Press
button to select "REGULAR" "SOAK" "SPEED" "HEAVY"
"SOAK" cycle
This method is used to wash clothing which
easily absorbs stain and clothes with
noticeable stains.
or "DELICATE".
4 Press
button.
• The time requirement is 1 hour.
• Rinsing is set to "OVERFLOW RINSE".
• The pulsator automatically detects the laundry amount, and indicates
When you press
once, "OVERFLOW
the amount of concentrated detergent suitable for the laundry amount.
RINSE" will be canceled.
5 Put in the detergent according to the detergent guide.
"SPEED" cycle
It is especially for light soiled clothes.
It washes with regular water current mode
and shorter washing time.
6 Close the lid.
• If you start the lid opening, cycle stops before spin.
• Avoid your finger caught when closing the lid.
"HEAVY" cycle
Cycle end
It is especially for heavy soiled clothes.
It washes with stronger water current mode
and longer washing time.
The power turn off automatically.
• A "beep" sound will be heard when operation is finished.
"DELICATE" cycle
∗ If you add the laundry during washing, be sure to press
button.
This course is for delicate clothes such as
blouse or lingerie to wash gentlely with very
mild water flow.
After stopping the basket, put the laundry in it.
∗ If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps and the CHILD PROOF indicator
flashes then the machine starts draining water.
Cloth Weight : 2kg or less.
If you wish to turn off the end buzzer sound
• You can turn off the buzzer sound.
• With pressing "COURSE" button, press to turn on the power switch.
• AAfsteyrobuurzezseert,bseeetptshe3 stiammees,wthaey.end buzzer disabled.
∗ Once you set it, the washing machine will remember the mode set,
and no need to set each time.
With pressing
Press
6
6348100701 (02-06)
6
12/11/08, 8:53 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE
WASHING OF BLANKET
SUPER SPIN DRY
When you need to dry clothes or shorten their
indoor drying time.
3
4
2
1
4-1
5
4-2
1
Type and amount which may be washed.
Single size
(140 cm x 200 cm or less)
100% synthetic fiber
type: Mayer, Tuft, Down cloth
The amount of laundry/once of spin
Less than 1.5 kg
Setting time for spinning
• You can manually set the time of spinning according to the
Weight: 2.8 kg or less
following guide:
• All wool blankets and regular electric blankets should
If you would like to shorten the time of drying clothes in the
room: 30 min.
NEVER be washed.
Washable electric blankets should be washed according to
the washing instruction given in the user’s manual that ac-
If you would like to dry the synthetic clothes: 90 min.
The clothes which cannot be performed spin
drying
• “SUPER SPIN DRY” program will use a long time to spin
with high speed and will stop every 30 minutes to loosen
the laundry in the basket. Please do not spin the following
clothes:
• Icfotmhepabnlayntkheetmwiwllhneont gpouricnhtoasweads. hing net because of fiber
length of thickness, it cannot be washed.
Folding blankets
Allow the
hem of the
blanket to ex-
tend about
• Remove waste or
• tFhoreldadthferomblabnlaknekteitn.
• Easily color bleeding clothes.
• Easily wrinkled clothes (e.g.blouse, 100% cottons, or shirts).
• Easily transformable clothes.
140 cm
two lengthwise.
10 cm.
Fold it once again the same way.
• Waterproofed clothes.
Insert a blanket to the net
• Roll up the blanket.
1 Turn the POWER on and put the laundry in the
basket.
• Roll the blanket up loosely
• PexlacceepttMheaybelratnykpeetbilnatnoketht.e
blanket net hem-side first,
and close the fastener.
2 Press the
button to select the program.
• At the set of “TUB CLEANING” without “SPIN” cycle,
you cannot select “SUPER SPIN DRY”.
Washing period may become longer with drain-
age condition.
3 Press the
• 30 min. is indicated by lightening.
• 90 min. is indicated by flashing.
button and select the desired time.
1 Turn the POWER on.
2 Put the detergent and press the START button.
Put the detergent amount matches for HIGH in spite of
displaying detergent volume for LOW.
4 Press the
button.
• The pulsator will operate before the water is let into the
basket.The washer will estimate the amount of laundry
and display the detergent amount (while the lid is open).
• After operate 3 and 4 minutes and a detergent melts,
cut the POWER off.
• Do not use soap powder.
5 Put the detergent as the display and close the lid.
• If the lid is open during the operation, the washer will
stop before washing and spinning.
3 Put the blanket in basket.
• Place the blanket in net and put into the basket with the
fastenerside on top.
• Dip a blanket in washing liquid sufficiently.
4 Set the regular cycle.
After the operation: the buzzer will beep when the washer
com•pleTtuersntohfef tohpeefraauticoent. and clean the lint collector.
Press
once to set to “OVERFLOW RINSE”.
Press
to set 45L water level.
5 Close the lid and press the START button.
Take the blanket out after washing completed.
• Open the blanket net fastener and put at the center of the
blanket. Then take out the blanket from net.
7
6348100701 (07-10)
7
22/10/08, 11:17
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOM WASH CYCLES
"OVERFLOW RINSE" cycle
OVERFLOW RINSE cycle compared to normal washing, is one
rinse more (total 3 times) and last rinse becomes overflow rinse.
• When set once, it is written in memory and starts with overflow
rinse from the next time.
3
2
1
You can select the operation that you want — such
as spin only or rinsed water reuse.
The process cannot be changed after pushing the START.
Turn the POWER supply off and on in order to change course.
1 Turn the POWER on.
ꢀPut the laundry in the basket and select your favorite cycle or water level.
2 Set the custom wash cycle.
ꢀ
ꢀ
WASH
RINSE
ꢀ
ꢀ
WASH
RINSE
Removing clothes with-
out spinning to prevent
wrinkling, or reusing the
softener.
WASH
RINSE
SPIN
WASH
and
RINSE
Regular washing
ꢁ OVERFLOW RINSE
ꢀ
ꢁ OVERFLOW RINSE
ꢁ SPIN
SPIN
Press 6 times
Rinsing perfectly at the
regular washing cycle.
At the RINSE cycle, the
water is automatically
added.
ꢀ
ꢀ
ꢀ
ꢀ
WASH
RINSE
OVERFLOW RINSE
SPIN
ꢀ
ꢀ
ꢀ
WASH
RINSE
OVERFLOW RINSE
WASH
RINSE
OVERFLOW RINSE
SPIN
Washing the easily
wrinkled clothes without
spinning.
WASH
RINSE
OVERFLOW RINSE
Reusing the softener.
Press 7 times ꢁ SPIN
Press once
Press twice
ꢀ
WASH
ꢀ
WASH
Washing clothes with
different soil separately
and spinning.
ꢁ RINSE
ꢁ OVERFLOW RINSE
ꢁ SPIN
WASH
SPIN
ꢁ RINSE
ꢁ OVERFLOW RINSE
Re-using washed water.
Melting a detergent
WASH
only
Press 8 times
Press 9 times
Press 10 times
ꢀ
SPIN
Performing rinse only for
articles which have
been washed.
(Spinning will start
before rinsing)
ꢁ WASH
RINSE
ꢁ OVERFLOW RINSE
ꢀ SPIN
ꢁ WASH
ꢀ
Performing rinse which
have only been washed.
(Spinning will start
before rinse)
RINSE
and
SPIN
ꢀ
RINSE
RINSE
only
ꢁ OVERFLOW RINSE
Press 3 times ꢁ SPIN
ꢁ WASH
ꢁ WASH
ꢀ
Rinsing perfectly and
spinning only.(Spinning
will start before wash-
ing.)
Rinsing the washed
clothes perfectly.
(Spinning will start
before washing.)
RINSE
OVERFLOW RINSE
SPIN
ꢀ
ꢀ
ꢀ
RINSE
OVERFLOW RINSE
SPIN
RINSE
OVERFLOW RINSE
RINSE
OVERFLOW RINSE
ꢀ
Press 4 times
Press 5 times
ꢁ SPIN
ꢁ WASH
ꢁ RINSE
ꢁ OVERFLOW RINSE
ꢀ
Spin only for hand-
washed articles.
(Draining before spin-
ning.)
SPIN
only
SPIN
Draining water from the
tub.
DRAIN
only
3 Close the lid and press the START button.
• To use drain only, leave the lid open.
After error display appears, turn the power off.
If you wish to change the shower rinse to the static rinse
For the shower rinse, it needs twice for the process.
But for the static rinse, it needs only once.
SHOWER RINSE CYCLE means during stirring,
flowing water and rinsing are executed
simultaneously.
1
Press
button.
When flowing water amount is
small, the tank may not be
filled up.
2
Press the
button and hold for 5 seconds.
ꢀ The buzzer sound will be heard and the course will be set within 5
seconds. After that, turn off the washer.
NOTE • Never press
and
button in the same time.
• Follow this instruction for the shower rinse, and the buzzer sound will
be heard.
• After the setting, the washer will keep the setting in memory. So it is not
necessary to reset every time.
8
6348100701 (07-10)
8
12/11/08, 8:54 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
LAUNDRY GUIDE
Recommended detergent amount
Put the laundry in the washer basket, push the START button, rotate the
pulsator without water to detect the laundry amount.
•
Then it indicates the amount of detergent required.
Example
Put 1 spoon of the detergent.
Indicates one measuring spoon of the concentrated detergent is required.
•
Caution
The estimated amount of washing
The detergent spoon size may vary from
•
D
etergent
different manufactures and the brands.
If there is water in the basket before
starting, the water level is set high without
detecting the laundry amount.
Softener
(Normal Type)
Manual Water
Level Setting
•
Normal
Type
Concentrated
Type
Powder
Liquid
cup
When the pulsator moves without water,
there may be sound come from the clothes
buttons. Don’t worry about clothes
damages. If it is necessary, put delicate
buttons inside of the clothes to avoid
damage.
•
Approx. 30g Approx. 30mL Approx. 30mL Approx. 10mL
45L
34L
22L
Approx. 23g Approx. 23mL Approx. 23mL
Approx. 15g Approx. 15mL Approx. 15mL
Approx. 7mL
Approx. 5mL
The detergent amount differs with the type of the detergent.
Too much detergent causes frothily or insufficient rinse.
The water level slightly differs according to the particular type of laundry.
•
•
•
When using liquid detergent and bleach
Caution
Liquid detergent and bleach
Colored and dyed fabrics may lose their color if washed
in bleach, so be sure to consult the instructions on the
bleach container before washing.
Do not apply chloric bleach directly to laundry items.
Do not allow bleach to spill on the control panel. If you
spill bleach, wipe it away.
Pour liquid detergent into the bleach dispenser with watered down
double.
Pour it into the bleach dispenser slowly, being careful not to split it,
while the water fills for the wash cycle.
•
•
•
When using powered bleach, add it directly into the basket.
When using softener
Caution
1
2
Add softener to the softener dispenser at the top of the basket,
and close the softener dispenser lid.
You cannot see the softener poured into the dispenser
while rinsing. Because it moves to the three parts in
the case for using the centrifugal force at spinning.
Softener effectiveness is reduced when OVERFLOW
RINSE is used.
Do not open the lid while spinning. The softener
dispensation timing will be thrown off and effectiveness
reduced.
•
If the basket is situated so that filling with softener is difficult,
turn the basket to counter-clockwise to a more accessible spot.
•
•
•
Wash as described on page 5 ~ 7.
Softener will be dispensed automatically.
The amount of softener varies with the
brands. Follow the instruction on the
softener label.
•
•
Do not leave the washing machine idle for long periods
while filled with softener.
Pour the concentrate softener after watering down triple.
•
•
If you feel the water amount is less or much
Water level is automatically set
to suit the laundry amount.If you
feel the water amount is less or
much, you can adjust it by
following.
If you feel the water amount is much.
If you feel the water amount is less.
Turn the POWER on with pressing WATER LEVEL button.
Adjust by pressing SELECT
Adjust by pressing START
Pressing 2 times Pressing 1 times
Pressing 1 times
(increase 3L)
Pressing 2 times
(increase 6L)
(reduce 6L)
(reduce 3L)
Turn off the POWER. (Finished adjusting)
* Set it once, it is written in memory.You don’t have to set it on each laundry.
9
6348100701 (07-10)
9
22/10/08, 11:18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lint collector
Clean the lint collector after every use.
1 Remove the lint collector by lifting it up.
When the machine has stopped in a place
in which it is difficult to lift the lint collector
out, turn the basket by hand to a more
convenient place and remove the lint
collector.
2 Remove the lint by turning
the lint collector inside out.
3 Replace the lint collector.
• In the event that the net is
damaged,consult your
nearest dealer.
Softener case
Catch
Remove and clean after every ten usages.
Removal
1 Hold down the each.
2 And pull toward you.
Installation
1 Fit in the bottom.
2 Then press in the top until the
catch catches.
Caution
ener case
Water in the case may freeze in cold weather.
•
If this occurs, remove the case, immerse in warm water (less than 40°C) for 10 minutes, and replace after dried well.
Washing machine body and panel
Before performing any maintenance on your washing machine, be sure to remove the electrical plug from its power source.
The main body and control panel may be cleaned by wiping with a soft cloth soaked in water.
(Hard-to-remove dirt may be cleaned by wiping with a soft cloth soaked in a mind detergent.)
Caution: Never clean the body or control panel with benzine, thinner, cleanser, or other chemical cleaners. Use of such
chemicals can discolor or damage parts.
Cleaning the tub
1
2
Turn the POWER on.
"TUB CLEANING" course
The dirt from clothes or wastewater on the wash/spin basket will cause the
smell or the problem of water draining. Such dirt from the washing process
will then make the laundry dirty. If you are in such case, please use "Tub
Cleaning" program once a month. Or in case the clothes have been
starched, please use the "Tub Cleaning" program to remove the dirt of the
starch from the basket.
Press the COURSE button and select
TUB CLEANING.
3
Press the START button.
During the "Tub Cleaning" program,
only the TUB CLEANING indicator will
light on.
•
Normally use detergent.
The amount of detergent must be more than the guided Standard
Detergent Amount.
•
•
4
When the pulsator (spinning board)
starts to spin, add the chlorine-type
whitening detergent about 300 ml. to
the basket.
Do not use "Tub Cleaning" program continuously.
If there is a great amount of dirt inside the basket, you had better use
the chlorine-type basket cleaner for the washing machine.
Please follow the instruction labeled on the cleaner bag.
•
•
Do not put any clothes in the basket
during the "Tub Cleaning" program.
•
L "Tub Cleaning" Process
Water Intake and stir about 5 min
5
Close the lid.
Soaking
about 20 min
If the lid is opened during the operation,
the operation will stop before the
draining and rinsing process.
•
Washing (Tub cleaning) about 3 min
Draining water and spin about 4 min
Water Intake and stir about 5 min
Finish "Tub Cleaning" process.
Beeping when the operation is finished.
•
Rinsing
about 3 min
Draining water and spin about 1 min
10
6348100701 (07-10)
10
22/10/08, 11:18
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Choosing an installation location
Install your washing machine in a level, stable place.
Avoid place where the machine is exposed to direct sun-
light.
• Plastic parts may become deformed or discolored.
• It is dangerous to place the washing machine in an
• Iutnwsitlal ibnlcereloacsaetiothne, ssoinucneditpmroadyucmeodvbeydtuhreinmgavcibhrinaetiownh.en it
vibrates during use.
When you move washing machine, hold the handles on
the sides.
There are moving parts, electrical parts and steel plates
which may cause electrical shock or injury.
• Never touch on the cabinet bottom by hands.
Never lift at the cabinet bottom by hands.
Avoid places where the machine may become frozen
during cold weather.
Allow a space of at least 5 cm from the sides and rear of
the machine to the nearest vertical object.
• When placed too near to walls or other objects, the
vibration of the machine during operation may cause them
to shake.
When the machine is covered.
Do not use the cover made of chloric vinyl. Sometimes it
damages resinous parts and painted surface. When you use
the cover made of chloric vinyl, put the cloth between the
machine and the cover.
Allow 5 cm
Installing the bottom cover
Put the bottom cover into the bottom of the washing machine, and fix the bottom cover with screws.
1 Lay down the washing machine
on a flat object such as a corrugated board
so that the front side is down.
FR ONT
2 Align the bottom cover with
the taps of the hooks of the
bottom cover left & right. (4 taps)
3 Fasten the screws on 6 positions.
FR ONT
BOTTOM C OVE R (LE FT)
BOTTOM C OVE R (R IG HT)
S UP P OR T P LATE
Installation
Adjust the legs so that the body of your washing machine is level. (The two legs are adjustable.)
After loosening the adjusting
nut, adjust the leg to the proper
height by turning it. Then
tighten the adjusting nut se-
curely once again.
When the leg height is difficult to
adjust because of floor slope or
unevenness, place a board of
sufficient thickness to prevent
breakage under the affected legs
to allow adjustment to a level po-
sition.
A weight attached to a string may be used
to check to ensure that your washing
machine is level.The distance is less than
1 cm between A and B
1
2
3
eg nut
String
Loosen
Tighten
ower
Raise
Check the distance
11
6348100701 (11-15)
11
22/10/08, 11:19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installing the ground pin
• The ground pin in the plug should be connected to the proper point of the socket for grounding.
Installing the drainage hose
Moving the hook
Drainage hose extension
• When inserting the drainage hose into a wash pan or
• Pay close attention to the height of the drainage hose and
onto a drain pipe, the hook may be moved to facilitate
articles over which it passes. If the drainage hose is too
• tWheheinnshtaolloaktiinogn.the hose hook
into the slot provided on the
body of your washing machine,
• Thihgeh,lepnrgoptherofdtrhaeinage may not be obtained.
drainage hose may be
3 m or less
extended to as much
move the hook back to its initial
position.
as 3 m if kept the same
level.
Hook
Drainage hose
Drainage hose cap
• Insert the drainage hose
in as far as it will go, then
use the accessory hose
Hose band
Caution:
• If the level of the threshold and the drainage hose is high,
the washing machine may not be drained.
• bSaencdurteotsheechuoreseitttiigghhttllyy..
An improperly secured
Drainage hose
Drain pipe
• hWohseenmaattyacchaiunsgethleeakdaragien.ag
hose to a wash pan, etc.,
either leave a gap between
the end of the hose and the
adjacent surface, or cut the
hose diagonally to ensure
proper drainage.
Gap
3 cm or
greater
• Be careful not to rub the drainage hose. Do not insert the
drainage hose under the washing machine. They may be
damaged the drainage hose.
Concrete block
Cut diagonally
Drainage hole
Allowing the flat end of the
hose to come in contact
with the flat surface of the
washing machine will
impair drainage.
nage
hose
Moving the drainage hose The drainage hose can be installed on either the right or left side.
The connector port for the drainage hose is found on the right side of the washing machine, but it can be changed without
disconnecting the internal hose from the drainage valve.
1 Remove the back cover, then
grip the stopper securing the
internal hose with your fingers
and pull it up.
5 Turn the stopper 180°C without removing from
hose.Insert the stopper into the securing hole
on the left side of the outer shell and press
down to secure the internal hose.
Stopper
Drainage valve
2 Turn the nut for the drainage
hose connector port
counterclockwise.
3 Pull the internal hose from
inside the washing machine to
detach.
Nut
Tap
4 Remove the hose hole cap on
the left-hand side, from inside
the washing machine align the
internal hose with the notch in
the connector port and fit into
place, then from outside put the
nut in place and turn clockwise
to secure.
Stopper
Hose hole cap
Upper and lower notches
6 Attach the back cover, and fit the hose hole
cap over the hose hole on the right-hand side.
in the hose hole
7 After moving the drainage hose, be sure to
testoperate the washing machine, ensuring
that there are no water leaks or unusual
noises.
Nut
Outer shell
12
6348100701 (11-15)
12
22/10/08, 11:19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Attaching the water supply hose to the faucet
Branching
water pipe
If you attach the water supply hose completely, it may cause a water leakage.
Caution
Faucet shape
Wall-mounted faucets are best.
• The old inlet hose should not be reused.
• If the faucets are not suited, please contact your
Wall-mounted
shaped
Square
faucet
Movable
faucet
Multi-home
faucet
• dDeoalenro. t connect the hot water supplying
• cInonovredneirentocep. rovide a permanent source of
Hose union
water for your washing machine, it is suggested
The distance is needed
1.6 cm or more
that a branching water pipe (available separately) be used.
Hose Union
5
6
Remove the seal from the union
and turn to the arrow destination
the nozzle to tighten securely.
Check the gap is approx. 1 to 3
mm between the nozzle and the
ring.
• If the gap is wide, it may cause the water leak.
• If it cause the water leakage during operation,
tighten the nozzle more securely.
Ring
Attaching the hose union
1
Push the lock lever of the water
supply hose.Pulling the sleeve down,
lower the entire hose to disconnect
the hose union.
Lock
lever
Approx.
1 to 3 mm
Sleeve
Water
supply
hose
Nozzle
2
Check the diameter of the faucet.
When the faucet mouth is large,
loose the screws and remove the
inside ring to facilitate, attachment.
Loose 4 screws of the hose union,
push the hose union to the water
faucet.
Tighten the four screws evenly
around the faucet. In this time check
the gap is approx.4 mm between the
nozzle and the ring.
Inside
ring
Caution
Ring
3
4
• If you attach the hose union again because of
moving house etc., loose the gap is approx. 4 mm
between the nozzle and the
Approx.
4 mm
ring. Then attach it according
above methods. They are
preventable the water leakage.
Approx.
4 mm
Joint
seal
Caution
4
Tighten the hose nut
on the end of the
water supply hose
securely to the water
intake valve.
Connecting the water supply hose
• Check to ensure that the water
supply hose is properly installed by
turning the water on and checking for
leakage.
1
2
3
Pull the sleeve down, then insert
the water supply hose.
Separate the sleeve until a click is
heard, then push it up.
Check to ensure that the lock
lever is hung on the nozzle. Next,
check to ensure that the water
supply hose does not come off by
pulling down on it.
Nozzle
Sleeve
If there is leakage, connect it from the
Water supply
hose
Hose nut
• Iffirsyot.u remove the water supply hose
after supplying water, water may
splash. Refer to the following
— “Removing the water supply hose”.
Lock
lever
Water intake
valve
If the filling water becomes not good
The water inlet may be blocked by foreign
objects. Remove the water supply hose
and clean the filter with a brush.
• If you remove the water supply care-
lessly, water may splash.Therefore, use
the following procedure.
Removing the water supply hose
1 Turn the water faucet off.
2 Turn the power switch ON and press
the START/HOLD pad.
3 After indicating the water level,
loosen the hose nut of the machine
top and remove it.
Filter
Wate
intake valve
In case of water may freeze
Drain all water from the
basket, drainage hose
and water supply hose
after using the machine.
If the water is frozen
1 Remove the water supply hose and pour in warm water (under 40°C).
2 Fill warm water (under 40°C) into the basket until the pulsator is
completely covered.Leave it for 30 minutes.Then check to see whether
the pulsator can be turned by hand.
13
6348100701 (11-15)
13
22/10/08, 11:19
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING THE SERVICEMAN
WHEN
CHECK
TREATMENT
does not operate
• Is there a power outage?
Please confirm whether a power failure or fuse
breaker is cut. Then draw out power supply
plug, insert once again and turn the power
switch on.
• Is the circuit breaker or fuses cut off?
• Is the machine’s plug properly inserted into
• aIsnthAeCpsoowceker ts?witch ON?
• Is there the inclination of the laundry?
• Is your washing machine installed on an
inclined or uneven surface?
making noise
Please correct the inclination or non stability
of laundry in the washing machine.
• Are there match sticks, hairpins or metal
Remove them.
objects being washed with the laundry?
Remove the center screw, lift the pulsator out
and remove the foreign object.
• Is there a foreign object caught under the
pulsator?
Water intake valve buzzes.
• Groan sounds during water supply.
water leak
Adjust the inside ring of the hose union or
change faucet shape (Refer to p.13)
• Is the faucet shape suited?
• Are the hose coupling and the nozzle loose?
Re-attaching the water (Refer to p.13)
• Is the water inlet nut loose?
Re-attaching the water supply hose (Refer to
p.13)
• Is the water supply hose connector clogged?
does not beep the
end buzzer
• If you turn the power on and press START
Reset the end buzzer sound to turn on refer-
ring to "If you wish to turn off the end buzzer
sound. (p. 6)"
pad immediately, it may not beep the end
• bIsutzhzeere.nd buzzer turned off?
Error Indication List
In the case the buzzer sounds and the select display flash alternatively.
The display of "LINEAR WATEL LEVEL" indicates the error condition as shown below.
WHEN
CHECK
TREATMENT
•Is the drainage hose properly connected to the machine?
•Is the drainage hose bent?
Open and close the lid once and
then press the START button.
•Is the drainage hose laid down?
•Is the drain water frozen?
•Is the outlet of the drainage hose sunk in water?
•Is the drainage hose clogged?
•Is there not the inclination of the laundry?
Please repair the inclination of a
•Is your washing machine installed on an incline or uneven washing machine and non
surface?
stability of a washing machine.
Then close the lid.
•Is the water faucet turned on?
Open and close the lid once and
then press the START button.
•Is the water supply frozen or shut?
•Is the inlet net of the water intake valve choked with dust?
•Is the lid opened?
Close the lid.
14
6348100701 (11-15)
14
28/10/08, 10:12
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING THE SERVICEMAN
The following are not malfunctions.
When:
Check:
• This is merely water lift over from the performance inspection performed
The first time you use your washing machine,
a small amount of water may drain out of the
drainage hose.
on your washing machine before it was shipped from the factory.
• Because of the electronic parts radiate heat.
During operation the control panel gets warm.
The pulsator rotates bit by bit.
• Because of preventing the laundry unbalancing, it rotates bit by bit.
During washing and rinsing, lamps flickers.
• It is the cause of the power source wiring in a house. If fluorescence light
be changed, it may improve condition.
During spinning, suddenly supplying the
water or rinsing.
• Because load unbalance occurred and safety switch operated. The spin
will cycle resume after supplying water, rotating and correcting the
unbalanced load.
Sloshing sounds of remaining water coming
from your washing machine after SPIN cycle
has been completed.
• They are made by water retained by the machine for the purpose of
maintaining balance and do not indicate malfunction.
• Spinning rate of fully automatic washing machine is lower than that of
twin tub washing machine. Sometimes spinning is uneven like thick parts
of blanket.
Spin extraction is not enough.
• There are a short pause before the machine begins to spin as the
After pausing the machine during the spin
cycle, it will not starts immediately.
drainage valve opens sufficienty.
If operates the machine at spinning on and • You may hear intermittent motor sound ("coon" sound) in spinning
off.
process occurs, this is a sound which occurs in order to control rotation,
and not a malfunction.
After water supply shut off or water with iron • Wait for water becomes clean. Returning type bleach can be used
rust appears.
(hydrohiter etc.) when iron rust adhered to the white colored clothes. Avoid
using the bleach for colored articles.
The buzzer does not stop.
• If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps. Check inside the washing
machine. Press POWER to turn it off.
HANDLING METHOD FOR EMERGENCY
When the machine takes on abnormal operation, please disconnect the power plug and send it to our service agency for
handling. Never disassemble the machine by yourself, for safety reasons.
SPECIFICATIONS
Type
Fully automatic washer
Vortex type
Rated period of operation
Standard amount of water
Standard water consumption
Regular cycle 43 min.
45L high water level
98L
Washing
system
Overall
dimension
Rated capacity
(Dry clothes weigth)
563(Width)x535 (Depth)x920(Height)
27kg
6.5kg
Water tap pressure
Weight
0.03~1MPa
15
6348100701 (11-15)
15
22/10/08, 11:19
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURED BY
TOSHIBA CONSUMER PRODUCTS (THAILAND) CO., LTD.
6348100701
6348100701 (01-Cover)
2
22/10/08, 11:12
Download from Www.Somanuals.com. All Manuals Search And Download.
|