COV_E9GA1FD_EN.fm Page 1 Thursday, March 8, 2007 12:09 PM
DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER
D-VR17KB
OWNER’S MANUAL
OPERATIONS
GUIDE
PROGRAM
REC
DUBBING
VCR/DVD
REC
VCR
DVD
ON
/
STANDBY
VCR
DVD
Printed in China
1VMN23544 / E9GA0BD ★★★★★
© 2007 Toshiba Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 2 Monday, March 26, 2007 10:14 AM
Introduction
Precautions
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
WARNING
THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with
CAUTION
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous
RISK OF ELECTRIC SHOCK
DO NOT OPEN
voltage” within the product’s
enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
The important note is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. Only a qualified service
personnel should remove the cover or attempt to
service this unit, due to the possibility of eye injury.
Caution
1. Do not attempt to open the cabinet. There are no
parts inside you can service. Refer all servicing to
qualified service personnel.
2. Slots and openings in the cabinet at the sides and
underneath are provided for ventilation. To ensure
reliable operation and to protect the unit from
overheating, these openings must not be blocked
or covered.
Avoid installation in enclosed spaces such as
bookcases unless suitable ventilation is provided.
3. Keep the unit away from radiators and other heat
sources.
4. Avoid use near strong magnetic fields.
5. Do not push objects of any kind into the unit
through the cabinet slots or openings as they
could touch electrically live parts or short circuit
parts resulting in a fire or electric shock.
6. Do not spill liquid on the unit. If liquid is spilled
and enters the unit, consult qualified service
personnel.
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
Power Supply
The power supply is connected and the unit is live
when the mains cable is plugged into a 220–240 V ,
50 Hz AC outlet. To operate the unit, press
7. Do not stand the unit vertically. Use the unit in a
horizontal (flat) position only.
8. Before attempting to operate the unit, make sure
that the timer recording mode is off.
[
ON / STANDBY].
9. This product is in Stand-by mode when turned off
while the mains cable is connected.
10. Do not place any combustible objects on the
device (candles, etc.).
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
11. Before moving the unit, be sure to remove any
discs and unplug the mains cable from the AC
outlet.
12. Disconnect the mains plug to shut off when find
troubles or not in use.
13. The mains plug shall remain readily operable.
14. Read both manual instructions to ensure correct
and safe installation and interconnection of the
unit in multimedia systems.
15. Keep the distances 20 cm around apparatus of
ventilation openings.
EN
2
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 3 Monday, March 26, 2007 10:14 AM
Important
A NOTE ABOUT RECYCLING
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.
No connection is to be made to the earth terminal of
the plug.
This product’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local recycling
regulations.
This product consists of materials
which can be recycled and reused if
disassembled by a specialised
company.
Batteries should never be thrown
away or incinerated but disposed of
in accordance with your local
regulations concerning chemical
wastes.
If a 13 Amp (BS 1363) Plug is used, a 3 Amp Fuse
must be fitted, or if any other type of Plug is used a 3
or 5 Amp Fuse must be fitted, either in the Plug or
Adaptor, or on the Distribution Board.
Mains Supply: 220 - 240V 50 Hz - AC only
Make your contribution to the environment!!!
• Exhausted batteries do not belong in
the dustbin.
• You can dispose of them at a collection
point for exhausted batteries or special
waste.
Do not make any connection to the larger pin marked
with the letter “E” or by the symbol
green or green and yellow.
or coloured
FUSE
• Contact your council for details.
BROWN
(Live)
For Customer Use:
BLUE
Carefully read the Model No. and Serial No.
located at the back of the unit and enter the
information below. Retain this information for
future reference.
(Neutral)
CORD GRIP
OUTER SHEATH OF THE WIRE
Model No. _____________________
Serial No. _____________________
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
• Do not place anything directly on top of the unit.
• Do not place the unit directly on top of the TV.
• Shield the unit from direct sunlight and keep away
from sources of intense heat. Avoid dusty or humid
locations. Avoid locations with insufficient ventilation
for suitable heat dissipation. Do not block the
ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong
magnetic fields.
Connection to Power
Before Switching on make sure that the voltage of
your electricity supply is the same as that indicated on
the rating plate.
Mains Cord
This appliance may be fitted with a non-rewireable
plug. If it is necessary to change the fuse in a
nonrewireable plug the fuse cover must be refitted. If
the fuse cover is lost or damaged, the plug must not
be used until a replacement available from the
appliance manufacturer is obtained.
It is important that the colour of the replacement fuse
cover corresponds with the rating marking on the
base of the plug.
Avoid the Hazards of Electrical Shock
and Fire
• Do not handle the mains cable with wet hands.
• Do not pull on the mains cable to disconnect it from
AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on the unit, unplug
the mains cable immediately and take the unit to an
authorised service centre for servicing.
If the plug has to be changed because it is not
suitable for your socket, or becomes damaged, it
should be cut off and an appropriate plug fitted
following the wiring instructions below. The plug
removed must be disposed of safely as insertion into
a 13A socket is likely to cause an electrical hazard.
For your own safety read the following instructions
carefully before attempting to connect this unit to
mains.
Moisture Condensation Warning
The wires in this mains lead are coloured in
accordance with the following code:
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
after heating a cold room, or under conditions of high
humidity. Do not use the unit for at least 2 hours to
allow the inside to dry.
BLUE=NEUTRAL, BROWN=LIVE
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 4 Monday, March 26, 2007 10:14 AM
About Copyright
Declaration of Conformity
Unauthorised copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorised by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorised
by Macrovision. Reverse engineering or disassembly
is prohibited.
This product complies with the requirement of the
directives
EMC-Directive:
Low Voltage Directive: 73 / 23 / EEC
CE Marking: 93 / 68 / EEC
89 / 336 / EEC
We declare that the following product:
DVD Video Recorder / Video Cassette Recorder
Model D-VR17KB
Trade Name: TOSHIBA
is in compliance with following Regulations.
EN55013: 2001+A1:2003, EN55020:
2002+A1:2003+A2:2005, EN61000-3-2:
2003+A2:2005, EN61000-3-3: 1995 + A1: 2001
EN60065: 2002
Notice for the Progressive Scan
Outputs
EN60825-1 Edition 1.2: 2001
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 525 or 625
progressive scan output, it is recommended that the
user switch the connection to the ‘standard definition’
output. If there are questions regarding your TV set
compatibility with this 525p or 625p DVD recorder,
please contact our customer service centre.
Maintenance
CLEANING THE UNIT
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use solutions containing
alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to
record high-quality video with stereo sound on
recordable DVD discs. The technology, when
utilised instead of PCM recording, also saves
recordable disc space, allowing for higher video
resolution or extended recording time on each
DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-Video players.”
Note: This is true when the players are compatible
with actual recordable DVD discs.
If a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out. Do not wipe in a
circular motion.
Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for
analogue records.
DISC HANDLING
Handle the discs so that fingerprints and dust do not
adhere to the disc surfaces.
Always store the disc in its protective case when it is
not in use.
“DTS” and “DTS Digital Out” are registered
trademarks of DTS, Inc.
SERVICING
If the unit becomes inoperative, do not try to correct
the problem by yourself. There are no user
serviceable parts inside. Turn the unit off, unplug the
mains cable, and consult your dealer or an authorised
service centre.
DivX, DivX Certified, and
associated logos are
trademarks of DivX, Inc. and
are used under license.
CLEANING THE DISC LENS
If the unit does not perform correctly even though you
have referred to “Troubleshooting” and the relevant
sections in the Owner’s Manual, the laser optical
pickup unit may be dirty. Consult your dealer or an
authorised service centre for inspection and cleaning
of the laser optical pickup unit.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 5 Monday, March 26, 2007 10:14 AM
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV programme reception is clear. Dirt
accumulated on the video heads after a long period
of use, or the usage of rental or worn tapes can
cause this problem. If a streaky or snowy picture
appears during playback, the video heads in the unit
may need to be cleaned.
Accessories Supplied
• Remote control with two R6 (AA) batteries
OPEN/
CLOSE
INPUT
SELECT
.
@/
:
ABC
JKL
DEF
MNO
PROG.
GHI
PQRS
MODE
ZOOM
TUV
WXYZ
CLEAR
SPACE
AUDIO
S
E
A
R
C
H
R
E
P
E
A
T
DISC MENU
TOP MENU
ENTER
DISPLAY
RETURN
INSTANT 1.3x/0.8x
SKIP PLA
Y
TIME SLIP
FWD
REV
PLAY
SKIP
STOP
SKIP
P
AUSE
VCR
DVD
REC
DUBBING
REC MODE
SAT.LINK TIMER SET TIMER PROG SETUP
SE-R0273
1. Please visit your local Audio / Video store and
purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the
problem, please consult your dealer or an
authorised service centre.
• RF cable
Note:
• Remember to read the instructions along with the
video head cleaner before use.
• Clean video heads only when problems occur.
• Owner’s Manual
Owner's Manual
• Quick Setup Guide
• Registration card
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 6 Monday, March 26, 2007 10:14 AM
Table of Contents
Introduction ............................................ 2
Precautions ........................................................... 2
Features................................................................ 7
Guide to the Owner’s Manual................................ 8
Functional Overview............................................ 11
Installing Batteries in the Remote Control........... 15
VCR / DVD Recorder Switching.......................... 15
Guide to On-Screen Displays.............................. 16
Front Panel Display Guide .................................. 18
Playback................................................42
Basic Playback .................................................... 42
PBC Function for Video CDs............................... 47
Special Playback ................................................. 48
Search ................................................................. 52
Repeat / Random / Programme Playback /
Slide Show........................................................... 53
Selecting the Format of Audio and Video............ 55
Editing ...................................................57
Disc Editing.......................................................... 57
Editing Discs........................................................ 57
Connections ......................................... 19
Connections ........................................................ 19
Function Setup .....................................64
Playback.............................................................. 66
Display................................................................. 69
Video ................................................................... 69
DivX® ................................................................... 70
Reset All .............................................................. 71
Basic Setup........................................... 22
Initial Setting........................................................ 22
Channel Setting................................................... 22
Setting the Clock................................................. 24
Selecting the TV Aspect Ratio ............................ 25
Recording ............................................. 26
Information on DVD Recording ........................... 26
Formatting a Disc................................................ 27
Selecting the Sound Mode.................................. 30
Basic Recording.................................................. 31
One-touch Timer Recording (OTR)..................... 32
Timer Recording.................................................. 33
Satellite Link........................................................ 36
Settings for External Equipment.......................... 38
Dubbing Mode..................................................... 39
Setting a Disc to Protect...................................... 40
Finalising Discs ................................................... 41
VCR Functions......................................72
Playback.............................................................. 72
Recording and One-touch Timer Recording
(OTR)................................................................... 72
Search ................................................................. 73
Other Operations................................................. 74
Hi-Fi Stereo Sound System................................. 74
Others....................................................75
Troubleshooting................................................... 75
Language Code................................................... 79
Glossary .............................................................. 80
Specifications ...................................................... 81
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 7 Monday, March 26, 2007 10:14 AM
Chasing Playback during Recording and
Simultaneous Playback and Recording:
You can play the already recorded part of the current
recording or another title during recording.
Features
This unit not only plays back DVDs, CDs and VHS
tapes but also offers features for you to record on
DVD discs and edit them after that. The following
features are offered with this unit.
Quick search:
You can easily find the part you want to watch using
the search function. Search for a desired point on a
disc by title, chapter / track or time.
Recording
Playback from Original or a Playlist (VR mode):
You can play back titles using either the Original list or
a Playlist.
The unit is compatible with DVD-RW, DVD+RW discs,
which are recordable repeatedly, and DVD-R, DVD+R
discs, which are recordable only once.
Also, this unit allows you to record to the video
cassette tape. You can choose either one for your
convenience.
Virtual Surround System:
You can enjoy stereophonic space through your
existing 2 channel stereo system.
Playing back on MP3 / JPEG / DivX® files:
You can enjoy MP3 files which are recorded on
CD-RW/-R.
DivX® files can also be recorded on DVD-RW/-R and
DVD+RW/+R discs.
DVD mode
VCR mode
Recording up to 12 programmes:
You can programme the unit to record up to 12
programmes, up to a month in advance. Daily or
weekly programme recordings are also possible.
VCR mode
One-touch Timer Recording:
Quick search for what you want to watch:
You can easily find the part you want to watch using
the Index or Time search functions. An index mark will
be assigned at the beginning of each recording you
make. For Time search function, you can go to a
specific point on a tape by entering the exact amount
of time you wish to skip.
You can set your required recording time easily. Every
time [REC I] is pressed during recording, the
recording time will be increased by 30 minutes up to 8
hours. It will be turned off automatically when the
recording time you set is finished.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a
videotape to a DVD disc. This function will be
available only if the DVD disc and the videotape are
not copy-protected.
Editing
DVD mode
Set / clear chapter markers (Video mode DVD-RW
Left channel stereo recording:
disc only) [
Page 60]
This unit can record the sound of the Left channel
monaural input as Left and Right channels
automatically (available only for AV3 jacks on the front
panel).
You can easily add chapter markers at every selected
time interval in your recordings for easy editing.
Adding or Deleting Chapter Marks Manually
[
Pages 59 - 60]
DVD mode
You can add or delete chapter marks.
Automatic Chapter marker setting:
Chapter markers will be added to recordings as you
set them in the Setup menu before starting to record.
Creating Titles to a Playlist (VR mode DVD-RW
discs only) [
You can create a title to the Playlist.
Deleting Titles [ Page 58]
Page 62]
Automatic Title menu making (Video, +VR mode
only):
The unit creates Title menus automatically when
finalising discs.
You can delete titles which you do not need anymore.
Deleting a Scene of a Title (VR mode DVD-RW
discs only) [
You can delete a specific scene of a title.
Editing title name [ Page 58]
Page 63]
Automatic Playlist making (VR mode DVD-RW
disc only):
The unit creates a Playlist automatically after
recording.
You can name titles or change the title name.
Combining Titles (VR mode DVD-RW discs only)
Automatic finalising (Video mode DVD-RW/-R,
DVD+R disc):
You can finalise discs automatically at the end of the
disc space if you set this in the Setup menu.
[
Page 61]
You can combine two titles into a single title.
Dividing Titles (VR mode DVD-RW, DVD+RW discs
only) [
Page 61]
You can divide a title into two new titles.
Playback
Protecting titles (VR mode DVD-RW disc only):
To avoid accidental editing or erasing of titles, the
protect function is useful when set to “ON” in the
Original list.
DVD mode
Theatre surround sound:
When the unit is connected to an amplifier or a
decoder compatible with Dolby Digital or DTS, you
can enjoy theatre-quality surround sound from discs
recorded with the surround sound system.
Hiding chapters (+VR mode only):
To keep others from playing back some chapters
without permission, you can hide chapters.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 8 Monday, March 26, 2007 10:14 AM
Compatibility
DVD mode
Guide to the Owner’s Manual
Playing back discs recorded in Video mode on
any regular DVD player:
Discs recorded in Video mode can be played back on
regular DVD players, including computer DVD drives
compatible with DVD-Video playback. You will need to
finalise the discs recorded in Video mode to play back
in other DVD players.
Symbols Used in the Owner’s Manual
To show what recording mode or disc type applies to
each function, the following symbols appear at the
beginning of each operating item.
Although DVD+RW/+R discs are playable on other
units without finalisation in most cases, it is
recommended to finalise in order to stabilise the
performance.
Symbol
Description
Available to DVD-Videos
DVD-V
Video
DVD-RW
Available to DVD-RW discs in
Video mode
* DVD-Video Format (Video mode) is a new format for
recording on DVD-RW/-R discs that was approved
by the DVD Forum in 2000. Adoption of this format is
optional for manufactures of DVD playback devices
and there are DVD-Video players, DVD-ROM drives
and other DVD playback devices available that
cannot play back DVD-RW/-R discs recorded in the
DVD-Video Format.
VR
DVD-RW
Available to DVD-RW discs in VR mode
Available to DVD-R discs in Video mode
Available to DVD+RW discs
Available to DVD+R discs
DVD-R
DVD+RW
DVD+R
CD
DVD mode
PDC:
VCR mode
This system assures that the TV programme you wish
to record using timer recording will be recorded
exactly from beginning to end even if the actual
broadcasting time differs.
Available to Audio CDs
Available to Video CDs
VCD
Available to CD-RW/-R discs with
MP3 files
Others
MP3
Progressive scan system:
Available to CD-RW/-R, discs with JPEG
files
Unlike conventional interlace scanning, the
progressive scan system provides less flickering and
images in higher resolution than that of traditional
television signals.
JPEG
Available to DVD-RW/-R, DVD+RW/+R
and CD-RW/-R discs with DivX® files
®
®
DivX
Available to VHS tapes
Use only cassettes marked VHS (
VCR
).
PAL
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 9 Monday, March 26, 2007 10:14 AM
Discs for Recording, Playing
DVD-RW
DVD-R
DVD+RW
DVD+R
Disc Type
Logo
Automatically
formatted in
Video mode
Automatically
formatted in
+VR mode
Automatically
formatted in
+VR mode
Can be formatted in VR or Video
mode
Format
Video Mode
VR Mode
Video
DVD-RW
VR
DVD-RW
Icon
DVD-R
DVD+RW
DVD+R
480 min (12 cm)
144 min (8 cm)
480 min (12 cm)
144 min (8 cm)
480 min (12 cm)
144 min (8 cm)
480 min (12 cm)
144 min (8 cm)
480 min (12 cm)
144 min (8 cm)
Maximum Record Time
Ver. 2.0
Ver. 1.1,1.2
Ver. 1.1/2× CPRM compatible
Ver. 1.2/4× CPRM compatible
Ver. 2.0/4×
Ver. 2.0/8×
Ver. 2.0/16×
Recordable/Playable
Versions
1×-4×
1×-16×
Playable on
Playable on most
Playable on most DVD+RW
Playable on most
DVD players.
Finalisation
recommended.
(Title menu will
be created)
Playable only on
VR mode
compatible unit.
Finalisation
recommended.
DVD players.
Finalisation
necessary.
(Title menu will
be created)
DVD players.
Finalisation
necessary.
compatible
players.
Finalisation
recommended.
(Title menu will
be created)
Compatibility
(Title menu will
be created)
Recording Features
Record TV
Programmes
✔
✔
✔
✔
✔
✔
✔
✔
✔
Reuse by deleting
the current
contents
Record 16:9 size
pictures
✔
✔
✔
Record copy-once
programmes
✔*
Create chapters at
fixed intervals
(auto chapter)
✔
✔
✔
✔
✔
Editing Features
Scene Delete
Playlist
Original
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Edit Title Name
Create chapters
wherever you like
(chapter mark)
✔
✔
✔
✔
Divide a title
Combine titles
Hide chapters
Delete a title
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Create a playlist
Protect a title
✔: Available
Gray: Not available
*CPRM compatible disc only.
Because of problems and errors that can occur during the creation of DVD and CD software and/or the
manufacture of DVD and CD discs, Toshiba cannot guarantee that product will play every feature of every DVD
bearing the DVD logo and/or every CD bearing the CD logo. As one of the creators of DVD technology,
Toshiba DVD players are manufactured using the highest standards of quality, and as a result, such
incompatibilities are rare.
DVD players with
are capable of playing DVD-RW recorded in VR mode.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 10 Monday, March 26, 2007 10:14 AM
Discs for Playing
DVD-VIDEO
CD-DA
Video CD
CD-RW
CD-R
Disc Type
Logo
Icon
DVD-V
Files for Playing
MP3
CD
VCD
CD
CD
Type of
title
JPEG
DivX®
Icon
®
®
MP3
JPEG
DivX
CD-RW/-R
DVD-RW/-R
DVD+RW/+R
CD-RW/-R
CD-RW/-R
Media
is a trademark of DVD Format/Logo Licensing
Corporation.
The number inside the globe refers to region of the
world.
A DVD labelled for a specific region can only play
back on the unit with the same region code.
• Official DivX® Certified product; Plays DivX® 6.0,
DivX® 5, DivX® 4, DivX® 3, and DivX®VOD video
content (in compliance with DivX Certified™
technical requirements).
• Discs containing the DivX® files with the DivX® GMC
(Global Motion Compensation) playback feature,
which is DivX® supplemental function, cannot be
played back on this unit.
Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x,
DVD-RW 2x
* This unit cannot play back the disc contents
protected by Windows Media Digital Rights
Management (DRM).
JVC
DVD-RW 4x
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
Unplayable Discs
The following discs will not play back on this unit.
Performance of any other discs are not guaranteed.
• CD-ROM
• Video Single Disc (VSD) • DVD-ROM
• DVD-audio
• DVD contains MP3, Windows Media™ Audio or
JPEG files
• Compact Disc-Interactive (CD-I)
• Toshiba is not liable for any damage or loss
caused directly or indirectly by the malfunction of
this unit, including, without limitation, any one of
the following:
• Unfinalised disc
• Failure to record contents intended to be
recorded by the consumer.
• Failure to edit contents as intended by the
consumer.
• When a DVD-RW/-R, DVD+RW/+R disc
created on this unit is used (e.g., insertion,
playback, recording or editing) in another
DVD player, recorder or personal computer
drive.
• When a DVD-RW/-R, DVD+RW/+R disc that
is used in the manner described in the
immediately preceding bullet point is used
again in this unit.
• DVD-R recorded in VR format or non compatible
recording format
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer
can be heard. The sound on the high-density super
audio CD layer cannot be heard.
Colour Systems
DVDs are recorded using different colour systems
throughout the world. The most common colour
system, used primarily in the U.K. and other EU
countries, is PAL.
This unit uses the PAL system. However, it is also
possible to play back DVDs using other colour
systems, such as NTSC.
• When a DVD-RW/-R, DVD+RW/+R disc that
was recorded in another DVD recorder, or in a
personal computer drive is used in this unit.
• Some functions may not work with personal
computer discs.
• Discs recorded in this unit may not operate as
expected on other DVD players, recorders or
personal computer drives.
Region Codes
This unit has been designed to play DVD
with region 2. DVD must be labelled for ALL
2
regions or for region 2 in order to play on the
unit. You cannot play back DVD that are
labelled for other regions. Look for the
symbols on the right on your DVD. If these
region symbols do not appear on your DVD,
you cannot play back the DVD in this unit.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 11 Monday, March 26, 2007 10:14 AM
Functional Overview
Front Panel
1
2
3*
4
5 6 7
PROGRAM
REC
DUBBING
VCR/DVD
REC
VCR
DVD
ON
/
STANDBY
VCR
DVD
AV3 S-VIDEO
VIDEO
L
R
20* 19* 18 17*16 15
1413121110 9*8
(
)
*You can also turn on the unit by pressing these buttons.
1
2
ON / STANDBY button
• Press to turn on or off the unit.
• Green LED lights up when power is ON.
12 VCR/DVD button (DVD / VCR)
• Press to select the DVD mode or the VCR
mode.
Cassette compartment (VCR)
• Insert a tape here.
13 DUBBING button (DVD / VCR)
• Press to start VCR to DVD (DVD to VCR)
duplication which you set in the Setup menu.
3 O (OPEN / CLOSE) button* (DVD)
14 PROGRAM
/
buttons (DVD / VCR)
• Press to open or close the disc tray.
• Press to change the channel up or down.
4
5
6
7
8
Disc tray (DVD)
• Place the disc here when the disc tray is
opened.
15 Display (DVD / VCR)
• Refer to “Front Panel Display Guide” on
page 18.
S-VIDEO input jack (AV3) (DVD / VCR)
• Use to connect the S-Video output of external
equipment with an S-Video cable.
16 REC I button (VCR)
• Press once to start recording.
• Press repeatedly to start a One-touch Timer
Recording.
VIDEO input jack (AV3) (DVD / VCR)
• Use to connect external equipment with a
standard Video cable.
17 P (PLAY) button* (VCR)
• Press to start playback.
• Press to turn on the unit and start playback
when the unit is off with a tape playback.
AUDIO input jacks (AV3) (DVD / VCR)
• Use to connect external equipment with a
standard Audio cable.
18 O/S (STOP / EJECT) button (VCR)
• Press to remove the tape from the unit.
• Press to stop the tape playback.
• Press to stop the proceeding timer recording in
VCR.
REC I button (DVD)
• Press once to start recording.
• Press repeatedly to start a One-touch Timer
Recording.
9 P (PLAY) button* (DVD)
19 f (FWD) button* (VCR)
• Press to start or resume playback.
• Press to rapidly advance the video tape.
• Press to view the picture rapidly in forward
during playback. (Forward Search)
10 S (STOP) button (DVD)
• Press to stop a playback or recording.
• Press to turn the unit on when the video tape is
inserted and start rapidly advancing the tape.
• Press to stop a timer recording of DVD.
11 VCR/DVD indicator (DVD / VCR)
• Indicates the selected component (DVD or
VCR).
20 r (REW) button* (VCR)
• Press to rewind the video tape.
• Press to view the picture rapidly in reverse
during the playback mode. (Rewind Search)
• Press to turn the unit on when the video tape is
inserted and start rewinding the tape.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 12 Monday, March 26, 2007 10:14 AM
Rear Panel
DVD/VCR
AV2(DECODER)
DVD
ANTENNA
IN
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT
OUT
VIDEO OUT
Y
PB
L
/CB
COAXIAL
AV1(TV)
PR
R
/CR
OUT
1
2 3
4 5 67 8 9
1
2
Mains cable
• Connect to a standard AC outlet.
5
6
7
AUDIO OUT jacks (DVD)
• Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
AV2 (DECODER) socket (DVD / VCR)
• Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
S-VIDEO OUT jack (DVD)
• Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
3
4
AV1 (TV) socket (DVD / VCR)
• Connect to the Scart socket on your TV. Use a
commercially available Scart cable.
COMPONENT VIDEO OUT jacks (DVD)
• Connect to the component video input jacks on
your TV.
• Use a commercially available Component Video
cable.
DIGITAL AUDIO OUT (COAXIAL) jack
(DVD)
8
9
ANTENNA OUT (DVD / VCR)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system. Use the supplied RF
cable.
• Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder, DTS decoder
or MPEG decoder. Use a commercially
available Coaxial cable.
ANTENNA IN (DVD / VCR)
• Connect to an antenna or cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have an RF modulator.
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 13 Monday, March 26, 2007 10:14 AM
Remote Control
5
AUDIO
button (DVD / VCR)
DVD mode
• When receiving a bilingual broadcast, press to
change the audio out setting to “Main”, “Sub”
and “Main/Sub”.
• Press to change the bilingual audio source of an
external equipment to “Main”, “Sub” or “Main/
Sub”. (Available only when the “External Input
Audio” in the Setup menu is set to “Bilingual” in
advance.)
• Press to display the audio menu during
playback.
• Press to select the sound mode.
VCR mode
• During playback of a Hi-Fi video tape, press to
change the audio out setting to “STEREO”,
“LEFT”, “RIGHT” and “MONO”.
• When receiving a bilingual broadcast, press to
change the audio out setting to “Main”, “Sub”
and “Main/Sub”.
• Press to change the bilingual audio source of an
external equipment to “Main”, “Sub” or “Main/
Sub”. (Available only when the “External Input
Audio” in the Setup menu is set to “Bilingual” in
advance.)
OPEN/
CLOSE
INPUT
17
18
SELECT
1
.@/ :
GHI
ABC
JKL
DEF
MNO
PROG.
19
2
3
4
5
6
PQRS
MODE
ZOOM
TUV
WXYZ
CLEAR
SPACE
AUDIO
20
21
SEARCH REPEAT
TOP MENU
22
DISC MENU
23
ENTER
7
24
25
DISPLAY
RETURN
8
INSTANT 1.3x/0.8x
SKIP
PLAY
TIME SLIP
FWD
26
28
30
32
9
10
REV
PLAY
STOP
27
29
31
SKIP
SKIP
11
12
13
14
15
16
PAUSE
VCR
DVD
REC
6
7
DISC MENU button (DVD)
• Press to display the Disc menu during playback.
• Press to change the Original and Playlist on the
TV screen. (VR mode only)
DUBBING
REC MODE
33
35
34
36
SAT.LINK TIMER SET TIMER PROG SETUP
Direction U / D / L / P buttons
(DVD / VCR)
SE-R0273
• Press to move the cursor and determine items
or settings.
8
9
DISPLAY button (DVD / VCR)
• Press to display the On-Screen Display.
INSTANT SKIP button (DVD)
• During playback, press to skip 30 seconds.
(See page 48.)
1
2
OPEN/CLOSE
• Press to open or close the disc tray.
• Press to remove the tape from the unit.
button (DVD / VCR)
10 REV r button (DVD / VCR)
DVD mode
Number buttons (DVD / VCR)
• Press to select channel numbers.
• Press to select a title / chapter / track on the
display.
• Press to enter values for settings in the Setup
menu.
• Press to enter the number in the Index or Time
search in VCR mode.
• Press to enter the characters in edit function.
• During playback, press to reverse fast.
• When playback is paused, press to reverse
slowly.
VCR mode
• Press to rewind the video tape.
• Press to view the picture rapidly in reverse
during the playback mode.
11 PLAY P button (DVD / VCR)
3
4
MODE button
• This button does not work for this unit.
• Press to start or resume playback.
12 SKIP B button (DVD)
• During playback, press twice in quick
successions to skip to the previous chapter or
track.
ZOOM button (DVD)
• During playback, press to enlarge the picture on
the screen.
• When playback is paused, press to play reverse
step by step.
13 PAUSE p button (DVD / VCR)
• Press to pause playback or recording.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 14 Monday, March 26, 2007 2:12 PM
14 DUBBING button (DVD / VCR)
• Press to start VCR to DVD (DVD to VCR)
duplication which you set in the Setup menu.
27 1.3x/0.8x PLAY button (DVD)
• During playback, press to playback in a slightly
faster/slower speed while keeping the audio
quality just as normal playback.
15 SAT.LINK button (DVD / VCR)
28 FWD f button (DVD / VCR)
DVD mode
• Press to call up the Satellite Link setting.
• During playback, press to forward fast.
• When playback is paused, press to forward
slowly.
16 TIMER SET button (DVD / VCR)
• Press to set the unit in timer-standby mode. In
the timer-standby mode, press to cancel the
mode and to turn on the unit.
VCR mode
• Press to rapidly advance the video tape.
• Press to view the picture rapidly in forward
during playback.
17 INPUT SELECT
button (DVD / VCR)
• Press to select the appropriate input.
29 STOP S button (DVD / VCR)
18
ON / STANDBY button (DVD / VCR)
• Press to turn on or off the unit.
• Press to stop playing back or recording.
30 SKIP F button (DVD)
• During playback, press to skip to the next
chapter or track.
19 PROG.
/
buttons (DVD / VCR)
DVD mode
• Press to change the channel up or down.
VCR mode
• Press to change the channel up or down.
• Press to adjust the tracking during playback or
in slow motion of the tape.
• While playback is in still mode, you can adjust
the vertically blurred picture.
• When playback is paused, press to advance
step by step.
31 VCR button (DVD)
• Press to select the VCR output mode.
(See page 15.)
32 DVD button (VCR)
• Press to select the DVD output mode.
(See page 15.)
20 CLEAR button (DVD / VCR)
DVD mode
• Press to clear the password once entered.
• Press to cancel the programming for a disc.
• Press to clear the selecting marker number in
the marker setup mode.
33 REC MODE button (DVD / VCR)
• Press to switch the recording mode.
• Press to clear the programme once entered in
the timer recording setting mode.
VCR mode
34 REC I button (DVD / VCR)
• Press once to start a recording.
• Press repeatedly to start a One-touch Timer
Recording.
• Press to reset the tape counter.
21 REPEAT button (DVD / VCR)
DVD mode
35 TIMER PROG button (DVD / VCR)
• Press to display the timer programme setting
menu.
• Press to select the repeat mode.
VCR mode
• Press to set or release the Auto Repeat
Playback.
36 SETUP button (DVD / VCR)
• Press to display the Setup menu in stop mode.
22 SEARCH button (VCR)
• Press to call up the index or time search menu.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly
with the operations using the remote control. Some
operations can be carried out using the buttons on
the front panel.
23 TOP MENU button (DVD)
• Press to display the Title menu.
24 ENTER button (DVD / VCR)
• Press to acknowledge or approve a menu
selection.
Note
• If you turn off this unit, [OPEN / CLOSE O] on the
remote control is not available.
• Be sure to use [O (OPEN / CLOSE)] or
[O/S (STOP / EJECT)] on the unit.
25 RETURN button (DVD / VCR)
• Press to return to the previously displayed menu
screen.
26 TIME SLIP button (DVD)
• Press once to start recording the TV programme
you are watching. Press again to watch the
content being recorded from the beginning while
recording continues. (VR mode DVD-RW discs
with the recording mode of LP, EP or SLP only)
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 15 Monday, March 26, 2007 10:14 AM
Installing Batteries in the
Remote Control
Install two R6 (AA) batteries (supplied) into the
remote control, carefully match with the polarity
indicated inside the battery compartment.
VCR / DVD Recorder Switching
Because this product is a combination of a VCR and a
DVD recorder, you must select first which component
you wish to operate.
PROGRAM
REC
DUBBING
VCR/DVD
REC
VCR
DVD
ON
/
STANDBY
VCR
DVD
1
2
3
VCR/DVD
VCR
DVD
DVD indicator
VCR indicator
Caution
• Incorrect use of batteries can result in hazards such
as leakage and bursting.
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
VCR mode
• Make sure that the plus and minus ends of each
battery match the indications inside the battery
compartment.
Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)
• Remove batteries if the equipment will not be used
for a month or more.
DVD mode
• When disposing used batteries, please comply with
governmental regulations or the public instructions
for environmental protection that apply in your
country or area.
Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Note
• You can also press [VCR/DVD] on the front panel to
switch between DVD and VCR mode.
• You cannot switch to the mode (DVD or VCR) that is
in the timer-standby mode.
About the Remote Control
• Make sure there is no obstacle between the remote
control and the remote control sensor on the unit.
• Use within the operating range and angle as shown.
PROGRAM
REC
DUBBING
VCR/DVD
REC
VCR
DVD
ON
/
STANDBY
VCR
DVD
Within about
7 m
Remote control
• The maximum operable range as follows:
Line of sight: approximately 7 m
Either side of centre: approximately 7 m within
30 degrees
• Remote control operation may become unreliable if
the remote control sensor of the unit is being
exposed by the strong sunlight or fluorescent light.
• Remote controls for different devices can interfere
with each other. Be careful when using remote
controls for other equipment located close to the
unit.
• Replace the batteries when the operating range of
the remote control reduces.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 16 Monday, March 26, 2007 10:14 AM
Press [DISPLAY] while the On-Screen Display is
displayed to display Title Name Information or File
Name Information.
Guide to On-Screen Displays
<Title Name Information>
Title Name
DISPLAY Menu
My Title
1
DVD mode
Press [DVD] first.
(only when DVD+RW/+R, VR mode DVD-RW/-R,
or unfinalised Video mode DVD-RW/-R disc is in
playback)
With a disc inserted into the unit, press [DISPLAY] to
display the On-Screen Display. The menu shows
information about what is recorded on the disc.
<File Name Information>
1/
5
1/
5
0:01:00 / 1:23:45
RW VR ORG
5
6
File Name
-
1
2
My File
P01 BBC1
1
3
(only when a CD with MP3/JPEG/DivX® files is in
playback)
1
Displays title/file name.
SP
1:53
4
7
This is an example screen for explanation. Displayed
items vary depending on the actual mode.
VCR mode
Press [VCR] first.
Press [DISPLAY] to display the On Screen Display.
1
2
Indicates a disc type and format mode.
12:00
1
2
AV2
Indicates a type of titles for VR mode
DVD-RW disc.
STEREO
3
3
4
5
6
Indicates a channel number, station
name or selected external input mode.
7
6
SP
0:00:00
STEREO
Indicates a recording mode and possible
recording time left.
4
5
This is an example screen for explanation.
Displayed items are depending on the actual
mode.
Indicates a title number, chapter number,
elapsed time and total of disc playback.
1
2
3
Current time
Each icon means:
Position number
: Search
: Audio
Audio status of the receiving broadcast
or external equipment
: Subtitle
: Angle
4
Audio status of the currently playing
back video tape
: Repeat
: Marker
: Noise Reduction / Black Level
5
6
7
Tape counter
: Zoom
Recording or playing back speed
Status of the current tape
: Surround
7
Indicates an operation status.
Note
While in the VCR mode, the On Screen Display of the
VCR mode is displayed.
• In some descriptions on this manual, only one disc
type is indicated as an example.
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 17 Monday, March 26, 2007 10:14 AM
8
Reset All:
Main Menu
To reset the setting to the factory default.
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to
display the sub menu. These menus provide entries
to all main functions of the unit.
9
: DVD
: VCR
Indicates the available mode for the selected function.
Setup
1
DVD Menu / CD Playback Mode
General Setting
2
Timer Programming
<DVD Menu menu>
Title List
3
DVD Menu
DVD Menu
4
5
1
CD Playback Mode
Format
Finalise
Disc Protect OFF
Delete All Playlists
2
ON
3
4
1
General Setting:
To go to General Setting menu.
2
Timer Programming:
<CD Playback Mode menu>
To programme a timer recording.
CD Playback Mode
3
Title List:
5
Random Play
Program Play
PBC (Video CD only)
Slide Show
6
To call up the title list.
7
8
4
DVD Menu:
To set up the DVD disc setting.
5
CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an
audio CD, a video CD, a CD-RW/-R with MP3 /
JPEG / DivX® files is inserted into the unit.
1
Format (DVD-RW, DVD+RW only):
Allows you to format the disc.
General Setting Menu
2
Finalise:
Allows you to finalise a disc containing recorded titles.
General Setting
9
1
2
3
4
5
6
7
8
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
3
Disc Protect (VR mode DVD-RW,
DVD+RW/+R disc only):
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Allows you to protect a disc from accidental editing or
recording.
Still Mode
TV System
4
Delete All Playlists (VR mode DVD-RW
disc only):
Allows you to delete Playlist.
1
Playback:
5
Random Play:
To set up the unit to play discs as you prefer.
Allows you to activate the random playback feature.
2
Display:
6
Program Play (audio CD/video CD only):
To set up the OSD screen as you prefer.
Allows you to activate the programme playback
feature.
3
Video:
To set up the video setting.
7
PBC (Video CD only):
Allows you to select images or information on the
menu screen by activating PBC (playback control)
function.
4
Recording:
To set up the unit to record to discs as you prefer.
5
Clock:
8
Slide Show (JPEG files only):
To set up the clock of the unit as you need.
Allows you to select the display time of the slide show
mode.
6
Channel:
To adjust the channel setting of the unit as you prefer.
7
DivX:
To set up the setting for the DivX® playback.
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 18 Monday, March 26, 2007 10:14 AM
Front Panel Display Guide
2
3
VCR
DVD
1
DB
VCR: Appears when this unit is in VCR output
mode, or the timer-standby mode for VCR
recording.
1
Current status of the unit
p:
Appears when disc playback is paused.
Appears also during step by step
playback.
Flashes when switch to the timer-standby
mode while programming cannot set.
Flashes when a programme cannot be
performed for some reasons.
B :
Appears when playing back a disc.
Appears during slow forward playback.
:
:
Appears when the timer programming or
One-touch Timer Recording (OTR) is set
and is operating.
* I,
, DB,
and DVD will be displayed
simultaneously during VCR to DVD duplication
Appears when the unit goes into the
Satellite Link standby mode.
Flashes when all the timer programmes
are finished.
Flashes when there is an error in
programming.
Appears when recording.
Flashes when recording being paused.
: Appears when a tape is in the unit.
Appears when dubbing.
: Appears when a disc is in this unit.
process.
I,
, DB,
and VCR will be displayed
simultaneously during DVD to VCR duplication
process.
2
3
Title / Track and Chapter number
I:
:
Title / track number
:
Chapter number
DB:
Displays the following
• Playing back time
• Current title / chapter / track number
• Recording time / remaining time
• Clock
• Channel number
• VCR tape counter
• One-touch Timer Recording (OTR) remaining
time
DVD: Appears when this unit is in DVD output
mode, or the timer-standby mode for DVD
recording.
Flashes when switch to the timer-standby
mode while programming cannot set.
Flashes when a programme cannot be
performed for some reasons.
Display Messages
The disc tray is
opening.
A disc is loading.
DVD
DVD
DVD
DVD
The PBC function
of the Video CD is
activated.
Data is being
recorded on a disc.
DVD
The disc tray is
closing.
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 19 Monday, March 26, 2007 10:14 AM
Connections
To Aerial jack
Antenna
Cable
Signal
Audio/Video cable (not supplied)
3
3
or
Scart/RCA cable
(not supplied)
Scart adaptor
(not supplied)
2
RF cable
(supplied)
Scart cable (not supplied)
DVD/VR
AV2(DECOER)
DVD
ANTENNA
IN
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT
OUT
VIDEO OUT
Y
PB
L
/CB
COAXIAL
AV1(TV
1
PR
R
/CR
OUT
RF cable
(not supplied)
Selecting Progressive Scan (625p/525p or
Interlaced 625i/525i) Playback
• If your TV is compatible with progressive scanning
(625p/525p), connect the TV to the COMPONENT
VIDEO OUT jacks of the unit and set “Video Out”
setting to “Component Progressive (P)” in the setup
menu. (See page 69.) Next, set your TV to the
progressive scan mode.
Connections
Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.
• If your TV is not compatible with progressive scan,
set “Video Out” setting to “Component Interlace (I)”.
• Use a commercially available adaptor if the Video
input jacks of your TVs or monitors are the BNC
type.
Before installation, plug off your TV and this unit.
Using the Scart socket
1 Connect the antenna or cable to the
ANTENNA IN jack of this unit.
Using the S-VIDEO OUT or the COMPONENT
VIDEO OUT jacks and the AUDIO OUT jacks
(Only for DVD)
If your TV has an S-Video or a Component Video
input jack, use either an S-Video cable (to connect the
S-VIDEO OUT jack) or a Component Video cable (to
connect the COMPONENT VIDEO OUT jacks), and
an Audio Cable (to connect the AUDIO OUT jacks).
• S-Video connection provides the good quality
picture.
2 Connect the ANTENNA OUT jack of
this unit to the Aerial jack of your TV.
Use the supplied RF cable.
3 Connect AV1 (TV) Scart socket of
this unit to the Scart socket of your
TV. Use a commercially available
Scart cable.
• Component connection provides the better quality
picture.
Note
• If your TV does not have a Scart socket, use a
commercially available Scart adaptor or Scart/RCA
cable to connect. Use only AV1 (TV) or AV2
(DECODER) socket for the VCR output signals of
this unit.
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the copy protection system.
1 Follow steps 1 and 2 on the left.
2 Connect S-VIDEO OUT or
COMPONENT VIDEO OUT jacks of
this unit to the S-Video or
Component Video input jacks of your
TV. Use a commercially available
S-Video cable or Component video
cable.
• Teletext can only be output in VCR mode through
AV1 (TV) out.
• When changing the “Video Out” setting (“SCART
(RGB)”, “Component Interlace (I)” or “Component
Progressive (P)”), connect to the corresponding jack
on the TV. If the setting is changed, for example, to
“Component Interlace (I)” or “Component
Progressive (P)” while the scart cable is connected
to the TV, a distorted video signal may be output.
3 Connect the AUDIO OUT jacks of this
unit to the analogue Audio input
jacks of your TV. Use a commercially
available Audio cable.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 20 Monday, March 26, 2007 10:14 AM
AUDIO IN
S-VIDEO IN
Component
Video IN
AV3 (Front)
Y
PB/CB
PR/CR
Audio
cable
(not
S-Video
Component
VideoCable
(not
cable
(not
supplied)
DUBBING
VCR/DVD
REC
supplied)
supplied)
DVD
VCR
DVD
AV3 S-VIDEO
VIDEO
L
R
DVD/VCR
AV2(DECDER)
DVD
ANTENNA
IN
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT
OUT
VIDEO OUT
L
/CB
CAXIAL
AV1(TV)
S-Video cable
(not supplied)
Audio cable
(not supplied)
R
/CR
OUT
Note for a TV with no S-Video input jack or Scart
socket:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component connection is compatible with the
Progressive Scan.
S-VIDEO AUDIO
OUT OUT
• When connecting an external device of monaural
output to this unit, use AUDIO L jack of AV3.
Connecting to External Equipment
This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
Digital Audio for Better Sound Quality
(Only for DVD)
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
Digital audio
input jack
Recording from a DVD player, VCR, Satellite
Box or other Audio-Video equipment with a
Scart output socket (AV2)
COAXIAL
AV output
DIGITAL
AUDIO OUT
socket (Scart)
Scart cable (not supplied)
COAXIAL
Coaxial cable
(not supplied)
AV2 (DECODER)
DVD/VCR
AV2(DECODER)
DVD
ANTENNA
IN
DIGITAL AUDIO S-VIDEO COMPONENT
DVD/VCR
AV2(DECODER)
DVD
ANTENNA
AUDIO OUT OUT
OUT
VIDEO OUT
DIGITAL AUDIO S-VIDEO COMPONENT
Y
AUDIO OUT OUT
OUT
VIDEO OUT
Y
IN
PB
L
/CB
COAXIAL
AV1(TV)
PB
L
PR
/CB
R
/CR
COAXIAL
AV1(TV)
OUT
R
PR
/CR
OUT
Note
The connections illustrated above are
optional for better sound.
• When you record a TV programme from a Satellite
Box, you must connect a Scart cable to
AV2(DECODER). (See page 36.)
1 For clear digital sound quality, use
the DIGITAL AUDIO OUT (COAXIAL)
jack to connect your digital audio
equipment.
• When AV2 is connected, the signal from the AV2 will
be output automatically. If you want to monitor the
signal from other input, you must press [DISPLAY]
first. Then, select the desired input to monitor with
[INPUT SELECT
].
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
Recording from a camcorder or other
Audio-Video equipment with no Scart output
socket (AV3)
If no S-Video input jack is available, connect to
VIDEO input jack on the front panel using an RCA
Video cable.
Change the setup when using S-VIDEO input jack.
(See page 38.)
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 21 Monday, March 26, 2007 10:14 AM
Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder
• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multi-
channel surround system.
• After connecting to a Dolby Digital decoder, set
“Dolby Digital” to “Stream” in the Audio Out menu.
(See page 67.)
• After connecting to a DTS decoder, set “DTS” to
“ON” in the Audio Out menu. (See page 67.)
• After connecting to a MPEG decoder, set “MPEG” to
“Stream” in the Audio Out menu. (See page 67.)
Connecting to an MD deck or DAT deck
• The audio source recorded in Dolby Digital Multi-
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” in the Audio Out menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set “Dolby Digital” and “MPEG” to “PCM” and set
“DTS” to “OFF” in the Audio Out menu for
connecting to an MD or DAT deck.
• You can use AUDIO OUT jacks for the connection of
your audio system.
After You Have Completed
Connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner’s Manual of your TV.
Note
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the effects of the copy protection system.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 22 Monday, March 26, 2007 10:14 AM
Basic Setup
Initial Setting
Turn on this unit for the first time, you need to follow
these steps.
Channel Setting
Tuning of this unit to broadcast channels can be
performed in two ways.
1 Press [
ON / STANDBY].
Auto Tuning
Programme the tuner to scan only the channels you
can receive in your area.
2 Turn the TV on. Select the input to
which the unit is connected.
3 Press [ENTER] to start Channel Tuning.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
The unit will start getting channels available in
your area.
Initial Setting
General Setting Menu will appear.
2 Select “Channel” using [U/ D], then
press [ENTER].
Auto Tuning
Make sure the antenna is
connected to “ANTENNA IN” jack.
3 Select “Auto Tuning” using [U/ D],
Start
then press [ENTER].
The unit will start storing channels available in
your area.
General Setting
4 After finished channel setting,
“Clock Setting” will appear. Then
press [ENTER].
Playback
Display
Video
Recording
Clock
Channel
DivX
Auto Tuning
Manual Tuning
Move
Initial Setting
Reset All
Clock Setting
- -
/
- -
/
- - - - ( - - - )
- - : - -
Wait for several minutes to finish channel storing.
4 Press [SETUP] to exit.
You can select the channels memorised only in
this unit by using [PROG.
/
].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
5 Follow to step 5 on page 25 in
“Manual Clock Setting”.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when either VCR or
DVD is in any recording mode (normal recording,
One-touch Timer Recording or timer recording).
• Sorting of TV channels from P01 to P06 will be
performed automatically as follows.
P01: BBC1
P04: CH4
P02: BBC2
P05: CH5
P03: ITV
P06: SKY NEWS
• If you are using a satellite receiver, turn it on and
select SKY NEWS before commencing tuning.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 23 Monday, March 26, 2007 10:14 AM
• If “Skip” is set to “ON”, select “Skip” using
[U/ D], then press [P]. Select “OFF” using
[U/ D], then press [L].
• If you want to decode scrambled signals, select
“Decoder” using [U/ D], then press [P]. Select
“ON” using [U / D], then press [L].
Manual Tuning
Manually tune each channel.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
• To store another channel, repeat steps 4 to 7.
8 After completion, press [SETUP] to
exit.
2 Select “Channel” using [U/ D], then
press [ENTER].
To Select a Channel
3 Select “Manual Tuning” using
You can select a channel using [PROG.
/
], or
[U/ D], then press [ENTER].
directly enter the channel using [the Number
buttons] on the remote control.
4 Select “Position” using [U/ D], then
press [P].
Notes on using [the Number buttons]:
• Enter channel numbers as a two-digit number for
the quickest result. For example, to select channel
6, press [0] and [6]. If you only press [6], channel 6
will be selected after 2 seconds. You can only select
channels 1 to 99.
Manual Tuning
Position
Channel
Decoder
Skip
P01
1
• You can select the external input mode “AV1”, “AV2”
or “AV3”.
OFF
ON
• To select “AV1”, press [0], [0], [1].
• To select “AV2”, press [0], [0], [2].
• To select “AV3”, press [0], [0], [3].
“P01” is highlighted.
To Skip a Preset Channel
You can set the unit to skip channels. You can no
longer receive or seldom watch when you access
5 Select the position number you wish
to use using [the Number buttons] or
[U/ D], then press [L].
channels using [PROG.
/
].
You can select position numbers 01 to 99.
1 Follow steps 1 to 3 in “Manual
Tuning” on page 23.
6 Select “Channel” using [U/ D], then
press [P].
2 Select “Position” using [U/ D], then
press [P].
7 Press [U/ D] to start scanning.
• The tuner will begin to search up or down
automatically. When a channel is found, the unit
will stop searching and the picture will appear
on the TV screen.
3 Select the position number you wish
to skip using [the Number buttons]
or [U/ D], then press [L].
• You can select a desired channel number using
[the Number buttons]. Refer to the following
Channel Plan table and press the three digits to
select the channel number.
(To select channel 4, press [0] first and then
press [0] and [4]. Or press [4] and then “– – 4”
appears and wait for 2 seconds.)
4 Select “Skip” using [U/ D], then
press [P].
5 Select “ON” using [U/ D], then
press [L].
• To skip another channel, repeat steps 2 to 5.
• If this is the channel you want, press [L].
6 Press [SETUP] to exit.
Channel Plan
CH Indication
01 – 10
TV Channel
IRA-IRJ, GAP
E21 – E69
21 – 69
74 – 78
80 – 99, 100
121 – 141
X, Y, Z, Z+1, Z+2
S1 – S20, GAP
S21 – S41
This unit can receive the Hyper and Oscar
frequency bands.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 24 Monday, March 26, 2007 10:14 AM
Move
You can replace two channels.
Setting the Clock
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
Auto Clock Setting
Channel Tuning must be set before setting Auto
Clock.
2 Select “Channel” using [U/ D], then
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
press [ENTER].
3 Select “Move” using [U/ D], then
press [ENTER].
2 Select “Clock” using [U / D], then
press [ENTER].
4 Select the position number of which
you want to change the channel
General Setting
using [U / D], then press [ENTER].
Playback
Display
Video
Recording
Clock
You cannot select a position number where
“– – –” appears next to the number, because
“Skip” is set to “ON” for that position number.
Channel
DivX
5 Move the channel to another
position number using [U/ D], then
press [ENTER].
Reset All
• To move another channel, repeat steps 4 to 5.
3 Select “Auto Clock Setting” using
6 Press [SETUP] to exit.
[U/ D], then press [ENTER].
4 Select “ON” using [U/ D], then
press [ENTER].
The current time will be set automatically.
5 Press [SETUP] to exit.
6 Press [
ON / STANDBY] to turn
off.
The Auto clock function is activated.
This unit will search for the time every time when
the power is turned off. Leave the unit off for
several minutes to give it time to set the clock.
Hint
• If you want to cancel “Auto Clock Setting,” select
“OFF” using [U/ D], and then press [ENTER] at
step 4.
Note
• The default setting of “Auto Clock Setting” is “ON.”
• The clock may set itself automatically after you
connect the antenna cable to the unit and plug in the
mains cable. In this case, the current time will
appear on the front panel display.
• To set the clock automatically, the channel assigned
to “P04” must receive the PDC signal.
• The clock cannot be set automatically if you are not
receiving a channel in your area that carries a time
signal. In this case, set the clock manually.
• Once the auto clock setting is performed, the unit
will correct the current time by receiving PDC
broadcasts whenever the power is turned off.
• The unit will correct the current time automatically at
8:00, if the unit is in standby mode.
• Between 23:00 and 1:00, the Auto Clock function
will not operate even when the power is turned off.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 25 Monday, March 26, 2007 10:14 AM
Manual Clock Setting
Selecting the TV Aspect Ratio
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
You can select the TV aspect ratio to match the format
of the programme you are playing back with the unit
and that of your TV screen (4:3 standard or 16:9 wide
screen TV).
2 Select “Clock” using [U/ D], then
press [ENTER].
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
3 Select “Clock Setting” using [U/ D],
then press [ENTER].
4 Press [ENTER] again.
2 Select “Video” using [U / D], then
Default date will appear.
press [ENTER].
General Setting
Playback
Display
Video
3 Select “TV Aspect” using [U/ D],
then press [ENTER].
Clock Setting
Auto Clock Setting
Recording
Clock
Channel
DivX
General Setting
Clock Setting
01 / 01 / 2007 ( MON )
0 : 00
Playback
Display
Video
TV Aspect
Select Video
Video Out
Reset All
Recording
Clock
Channel
DivX
Reset All
5 Enter the date (day / month / year)
using [U / D].
Press [P] to move the cursor to the next field. If
you wish to go back to the previous field, press
[L].
4 Select the desired option using
[U/ D], then press [ENTER].
6 Enter the time (hours / minutes)
General Setting
using [U / D], then press [ENTER].
Playback
TV Aspect
Select Video
Video Out
Display
Video
Recording
Clock
Channel
DivX
Reset All
The clock will start.
• Although seconds are not displayed, they will be
counted from zero.
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
7 Press [SETUP] to exit.
Note
• Your clock setting will be lost if either there is a
power failure or the unit is unplugged for more than
30 seconds.
5 Press [SETUP] to exit.
Hint
If you have a standard TV:
• Select “4:3 Letter Box” for a full width picture
with black bars at the top and bottom.
• Select “4:3 Pan & Scan” for a full height picture
with both sides trimmed.
If you have a wide screen TV:
• Select “16:9 Wide”.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 26 Monday, March 26, 2007 10:14 AM
Recording
Restrictions on Recording
Information on DVD Recording
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Videos and
some satellite broadcasts.
Type of Discs
This unit can record on DVD-RW/-R discs and
DVD+RW/+R discs.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
You can only record “Copy-once only” video using a
DVD-RW disc in VR mode with Content Protection for
Recordable Media (CPRM).
When recording a TV broadcast or an external input,
you can display copy control information on the
screen.
CPRM is a scrambling copy protection system for the
protection of “copy-once” broadcast programmes.
This unit is CPRM compatible, which means that you
can record copy-once broadcast programmes, but
you cannot then make a copy of those recordings.
CPRM recordings can only be played back on DVD
players that are specifically compatible with CPRM.
DVD-R/+R discs allow you to record programmes
only once, and the recorded contents can be erased
although the space left on the disc does not change.
DVD-RW/+RW discs allow you to record programmes
repeatedly, and the recorded contents can be erased.
There are 3 recording formats: VR mode, Video mode
and +VR mode. VR and Video modes are available
for DVD-RW discs while as only Video mode is
available for DVD-R discs. +VR mode is available for
DVD+RW/+R discs.
Video mode is the same recording format as used on
the pre-recorded DVD-Videos you purchase in local
shops. You can play back the discs recorded in this
format on most of the DVD players. You will need to
finalise such discs (see page 41) before playing them
back on other DVD players. Unless finalised, you can
record additional materials or edit discs recorded in
Video mode with this unit.
Information on Copy Control
Some satellite broadcasts include copy-protected
information. If you wish to record them, refer to the
following.
Copy- Copy- Copy-
Disc type / format
VR (Video Recording) mode is a basic recording
format for DVD-RW discs.
free
once prohibited
ver. 1.1 / ver. 1.2
VR
DVD-RW
VR mode offers advanced editing, and you can record
and edit material repeatedly, however it is playable
only on VR mode compatible unit. Finalisation is
recommended before playing them back on other
unit.
+VR mode is a recording format for DVD+RW/+R
disc. +VR mode offers basic editing, and it is playable
on most DVD players. Finalisation is recommended
before playing them back on other unit.
ver. 1.1 / ver. 1.2 CPRM compatible
ver. 1.1 / ver. 1.2
Video
DVD-RW
ver. 1.1 / ver. 1.2 CPRM compatible
ver. 2.0
DVD-R
DVD+RW
DVD+R
VCR
Recording Mode
You can select a recording mode from 5 options.
The recording time will vary depending on the
recording mode you select as follows.
: Recordable
: Not recordable
Note
Recording time
Recording
mode
Video /
Sound Quality
• This unit cannot record on CD-RW or CD-R discs.
• DVD-RW/-R, DVD+RW/+R and CD-RW/-R discs
recorded on a personal computer or a DVD or CD
recorder may not be played back if the disc is
damaged or dirty or if there is condensation on the
player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format, it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
12 cm
60 min
8 cm
XP
SP
18 min
36 min
72 min
108 min
144 min
120 min
240 min
360 min
480 min
LP
EP
SLP
• This table is intended for a standard new single-
sided 12 cm / 8 cm disc. The recording times are
estimates and actual recording time may differ.
• The audio and video quality becomes poorer as the
recording time gets longer.
• Discs recorded in Video mode on this unit cannot
record additional information using other DVD
recorders.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 27 Monday, March 26, 2007 10:14 AM
• It is not possible to use a DVD-RW disc formatted
with this unit on other DVD recorder unless the
content of the disc was also recorded with this unit.
• Since recording is performed using the Variable Bit
Rate (VBR) method, the actual remaining time for
recording may be a little shorter than the remaining
time displayed on the OSD, depending on the
picture you are recording.
Formatting a Disc
Choosing the Recording Format of a
Blank DVD-RW Disc
Video
DVD-RW
VR
DVD-RW
Making Discs Playable in Other DVD
Players (Finalise)
After recording, you must finalise the disc to play it
back in other players. (See page 41.)
When inserting a brand-new DVD-RW/+RW disc, the
unit automatically starts to initialise the disc.
DVD+RW disc will always be formatted in +VR mode,
and DVD-RW disc will be formatted either Video or
VR mode according to the recording format mode
setting of the unit. Before insert a brand-new
DVD-RW disc, you need to set the recording format to
the desired mode. You can also manually format a
DVD-RW disc once it has been used.
You cannot finalise discs in other DVD recorders.
After finalising
• After DVD-R discs are finalised:
- A Title menu is created automatically.
- Undo finalising is not possible.
- Additional recording or editing is not possible.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U/ D],
• After DVD-RW (Video mode) discs are finalised:
- A Title menu is created automatically.
- Undo finalising is possible. (See page 41.)
- Additional recording or editing is possible if you
undo finalise. (See page 41.)
then press [ENTER].
“DVD Menu” menu will appear.
3 Select “Format” using [U/ D], then
press [ENTER].
• After DVD-RW (VR mode) discs are finalised:
- A Title menu is not created.
Format menu will appear.
- Undo finalising is possible. (See page 41.)
- Additional recording or editing is possible if you
undo finalise. (See page 41.)
4 Select “Format Mode” using [U/ D],
then press [ENTER].
• After DVD+RW discs are finalised:
- A Title menu is created automatically.
- Undo finalising is possible. (See page 41.)
- Additional recording or editing is possible even
without undo finalising.
5 Select “Video mode” or “VR mode”
using [U/ D], then press [ENTER].
DVD Menu
• After DVD+R discs are finalised:
- A Title menu is created automatically.
- Undo finalising is not possible.
Format Mode
Fo
Fin
Video mode
Dis
VR mode
De
- Additional recording or editing is not possible.
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
6 Press [SETUP] to exit.
7 Insert a blank disc.
Formatting will start.
8 Formatting is complete.
“100%” is indicated.
Note
• The recording format setting is effective only for
DVD-RW discs. You cannot change the recording
format for a DVD-R disc and DVD+RW/+R disc.
• You cannot mix two formats on one DVD-RW disc.
If you insert a disc that has been recorded before,
the recording format cannot be changed even if you
change it in the Setup menu.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 28 Monday, March 26, 2007 10:14 AM
4 Select your desired setting using
Make Recording Compatible
[U/ D], then press [ENTER].
General Setting
DVD+RW
DVD+R
Use this feature to make the unfinalised +VR mode
discs recorded on other unit recordable on this unit.
When you make an additional recording on this unit
with “Make Recording Compatible” set to “ON”, the
title list is automatically converted to this unit’s style.
Playback
Display
Video
Recording
Clock
Channel
DivX
Auto Chapter
Select (XP)
Aspect Ratio (Video mode)
Auto
4 : 3
16 : 9
ideo mode)
Compatible
Bilingual Recording Audio
External Input Audio
Reset All
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
Auto (default): It will be recorded with whichever the
ratio that the programme you started
to record is broadcasted with.
2 Select “Recording” using [U/ D],
then press [ENTER].
4:3 :
16:9 :
Recorded in the aspect ratio of 4:3.
Recorded in the aspect ratio of 16:9.
3 Select “Make Recording Compatible”
using [U / D], then press [ENTER].
5 Press [SETUP] to exit.
Note
4 Select “ON” or “OFF” using [U/ D],
then press [ENTER].
• For VR mode DVD-RW disc, the image will be
recorded in whichever the ratio that the programme
you record is broadcasted with, regardless of the
“Aspect Ratio (Video mode)” setting.
• For DVD+RW/+R disc, the image will always be
recorded in aspect ratio of 4:3.
General Setting
Playback
Display
Video
Auto Chapter
Recording Audio Select (XP)
Recording
Clock
Channel
DivX
mode)
patible
Bilingual Recording Audio
External Input Audio
Make Recording Compatible
ON
OFF
Reset All
Setting Auto Chapter
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
DVD+R
ON: Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that has
a title list created by other units.
The unit inserts a chapter mark periodically (every 15
minutes by default) during recording. Using the Auto
Chapter menu, you can set this function off or change
the time period.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
5 Press [SETUP] to exit.
Setting Aspect Ratio for Video Mode
Recording
Video
2 Select “Recording” using [U / D],
then press [ENTER].
DVD-RW
DVD-R
3 Select “Auto Chapter” using [U/ D],
You can set aspect ratio for video mode recording.
then press [ENTER].
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
2 Select “Recording” using [U/ D],
then press [ENTER].
Reset All
3 Select “Aspect Ratio (Video mode)”
using [U / D], then press [ENTER].
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 29 Monday, March 26, 2007 10:14 AM
4 If you wish to set “Auto Chapter” off,
select “OFF” using [U/ D], then
press [ENTER].
5 Select “Yes” using [U/ D], then
press [ENTER].
e.g.) VR mode DVD-RW disc
DVD Menu
Format
Finalise
Disc Protect OF
Delete All Playl
General Setting
Playback
Start
Display
Video
Recording
Clock
Channel
DivX
Reset All
Auto Chapter
ode
Are you sure?
o Select (XP)
OFF
5 minutes
Yes
No
ideo mode)
10 minutes
15 minutes
30 minutes
Compatible
ding Audio
Audio
Formatting will start.
If you want to cancel formatting, select “No”.
60 minutes
6 Formatting is complete.
Note
If you wish to change the time period
for Auto Chapter, select the required
time period using [U/ D], then
press [ENTER].
• It is not possible to use a disc formatted with this unit
on other DVD recorder. When you use a disc with
another DVD recorder, format a disc using that DVD
recorder.
5 Press [SETUP] to exit.
Note
• The interval for auto chapter marks may slightly
deviate from the one you specified on the Auto
chapter screen.
• A blank chapter may be created depending on the
remaining time of the disc.
Reformatting a Disc Manually
Video
DVD-RW
VR
DVD-RW
DVD+RW
If you are using a DVD-RW/+RW disc, you can format
the disc by performing “Format”. You can format
DVD-RW disc for either Video mode recording or VR
mode recording. DVD+RW disc can be format in order
to erase all content of the disc.
Note
• When you reformat the disc, the contents of the disc
are erased.
• Make sure that the recording format is set to the
desired mode. (See steps 1 to 6 in “Choosing the
Recording Format of a Blank DVD-RW Disc” on
page 27.)
Insert a recordable disc.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U/ D],
then press [ENTER].
3 Select “Format” using [U/ D], then
press [ENTER].
4 Select “Start” using [U/ D], then
press [ENTER].
For DVD+RW, use [U/ D] to select “Yes”, then
press [ENTER].
A pop up window will appear and prompt you to
confirm.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 30 Monday, March 26, 2007 10:14 AM
5 Press [SETUP] to exit.
Selecting the Sound Mode
This unit can receive bilingual broadcasts.
Hint
• If you select “Stereo”:
The audio will be recorded as “stereo audio”.
• If you select “Bilingual”:
You can switch between modes by pressing
The audio will be recorded as “bilingual audio” (see
“Setting Bilingual Recording Audio” below for more
detail).
[AUDIO
] on the remote control. Each mode is
indicated on the TV screen as follows.
• During reception of bilingual broadcasts
Display on the
TV screen
Mode
Main
Sub
Audio output
Setting Bilingual Recording Audio
Video
Main audio from both
speakers
Main
Sub
DVD-RW
DVD-R
DVD+RW
DVD+R
Sub audio from both
speakers
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode or +VR mode.
• Main audio from the left
speaker
• Sub audio from the
right speaker
Main / Sub
Main / Sub
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
Setting External Input Audio
2 Select “Recording” using [U / D],
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
then press [ENTER].
3 Select “Bilingual Recording Audio”
DVD+R
using [U/ D], then press [ENTER].
When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual” to
record on a DVD.
4 Select “Main” or “Sub” using
[U/ D], then press [ENTER].
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
General Setting
Playback
Display
Video
Auto Chapter
Recording Audio Select (XP)
Auto Finalse
mode)
patible
Bilingual Recording Audio
External Input Audio
Recording
Clock
Channel
DivX
2 Select “Recording” using [U/ D],
Bilingual Recording Audio
Main
Sub
then press [ENTER].
Reset All
3 Select “External Input Audio” using
[U/ D], then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
5 Press [SETUP] to exit.
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Note
• If you are recording onto a VR mode disc, both
“Main” and “Sub” will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Reset All
Recording Audio Select (XP)
4 Select “Stereo” or “Bilingual” using
Video
DVD-RW
VR
DVD-RW
[U/ D], then press [ENTER].
DVD-R
DVD+RW
General Setting
Playback
Display
Video
DVD+R
You can enjoy high quality sound recording. This
function works only when the recording mode is set at
XP.
Auto Chapter
Recording Audio Select (XP)
Auto Finalse
mode)
patible
Recording
Clock
Channel
DivX
External Input Audio
Stereo
Bilingual
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
Reset All
Bilingual Recording Audio
External Input Audio
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 31 Monday, March 26, 2007 10:14 AM
2 Select “Recording” using [U/ D],
5 Press [OPEN / CLOSE O] to close
the disc tray.
then press [ENTER].
6 Select the recording mode using
3 Select “Recording Audio Select
(XP)” using [U/ D], then press
[ENTER].
[REC MODE]. (See page 26.)
7 Select the desired channel to record
using [PROG.
/
] or
4 Select “PCM” or “Dolby Digital”
[the Number buttons].
using [U / D], then press [ENTER].
8 Press [REC I] to start recording.
General Setting
The “●” mark will be displayed for 5 seconds.
Playback
Display
Video
Recording
Clock
Channel
DivX
To pause the recording, press [PAUSE p]. Press
[PAUSE p] or [REC I] again to restart the
recording.
Auto Chapter
ect (XP)
Recording Audio Select (XP)
PCM
mode)
Dolby Digital
9 Press [STOP S] to stop the recording.
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Reset All
This operation may take a few moments to
complete.
Hint
• You can change the channel while in the REC pause
mode.
PCM:
Records PCM audio for the best
quality sound.
Note
Dolby Digital:Records Dolby Digital audio for good
quality sound.
• Recording starts immediately and continues until the
disc is full or you stop recording.
• If the clock is not set, the space for a date and time
of title names will be 01/01/07 and 00:00.
• You cannot change the recording mode in the REC
or REC pause mode.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off or press [DISPLAY] when it is
connected to AV2.
• Up to 99 titles can be recorded on the DVD-RW/-R
discs.
5 Press [SETUP] to exit.
Note
• “PCM” stands for Pulse Code Modulation. It
changes analogue sound to digital sound without
compressing audio data.
• When the recording mode is set at other than XP,
the unit records “Dolby Digital” audio automatically
even if you selected “PCM”.
• Up to 49 titles can be recorded on the DVD+RW/+R
discs.
• NTSC recording is prohibited in this unit.
• You can play back a title on one device while making
a recording on other device. To do so, simply select
the device (DVD or VCR) you like to use for the
playback by pressing [DVD] or [VCR] button during
DVD / VCR recording. And then follow the normal
playback procedure.
Basic Recording
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
DVD+R
Follow the steps below to record a TV programme.
1 Press [
ON / STANDBY] to turn on
the unit.
Turn on the TV and be sure to select the input to
which the unit is connected.
2 Press [DVD].
3 Press [OPEN / CLOSE O] to open the
disc tray.
4 Place the disc on the disc tray with
its label facing up. Be sure to align
the disc with the disc tray guide.
Disc tray
guide
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 32 Monday, March 26, 2007 10:14 AM
• If DVD One-touch Timer Recording is completed
during VCR playback or recording, the DVD will be
in stop mode and the VCR keeps the current mode.
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
One-touch Timer Recording
(OTR)
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
[TIMER SET] to cancel the timer-standby mode to
use the unit continuously.
DVD+R
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is powered off or press [DISPLAY] when it is
connected to AV2.
This is a simple way to set the recording time in
blocks of 30 minutes. Check that the disc you are
recording onto has enough space remaining for the
time you set.
1 Turn on the unit and insert a
recordable disc.
Make sure that the TV input is set on the unit.
2 Press [DVD].
3 Select the recording mode using
[REC MODE]. (See page 26.)
4 Select the desired channel to record
using [PROG.
/
] or
[the Number buttons].
5 Press [REC I] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
One-touch Timer Recording will start.
0:30
Normal
Recording
1:00
8:00
7:30
• When the unit reaches the specified time, it will
be turned off automatically.
• To change the recording length during One-
touch Timer Recording, press [REC I]
repeatedly until the desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP S].
Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
• The remaining recording time will be displayed on
the front panel display during One-touch Timer
Recording.
• Unlike the timer recording, you can perform the
following operations during One-touch Timer
Recording.
- Turn off the power. (One-touch timer recording will
be cancelled.)
- Use [REC I] or [STOP S] on the remote control.
Note
• You cannot use the pause function during One-
touch Timer Recording.
• The unit will be turned off automatically under the
following conditions.
- No space remains on the disc.
- If a power failure occurs.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 33 Monday, March 26, 2007 11:06 AM
5 Select the channel number to record
using [U / D], then press [P].
To record from the external input, select “AV1”,
“AV2”, or “AV3”.
Timer Recording
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
6 Select the recording media (“DVD”
or “VCR”) using [U / D], then press
[P].
VCR
DVD+R
You can set the unit to record up to 12 programmes,
up to a month in advance. Daily or weekly programme
recordings are also available.
• Be sure to set the clock before entering a timer
programming.
7 Select the recording mode using
[U / D], then press [P].
Refer to “Recording Mode” on page 26 for DVD or
page 72 for VCR.
Insert a recordable disc or a tape with a
record tab.
8 Select “PDC” to “ON” or “OFF”
using [U / D].
1 In stop mode, press [TIMER PROG].
Refer to “PDC (Programme Delivery Control)” on
page 34.
Timer Programming list will appear.
2 Select “New Program” using
[U / D], then press [ENTER].
9 Press [ENTER] when all information
required is entered.
Timer Programming
Your programme setting is stored.
• To set another programme, repeat steps 2 to 9.
• To exit, press [TIMER PROG].
• When 2 or more programmes are overlapped,
“Timer program overlapped” appears, and the
overlapped programme will be displayed in blue.
To correct the timer Programme, Refer To
“Checking, Cancelling or Correcting the Timer
Programming Information” on page 34.
0:00 THU 06/12
Date
06/12
07/12
Start
7:00
9:00
End
9:00
9:30
CH
P10
P08
PDC
New Program
1/1
10 Press [TIMER SET].
• If there are 7 programmes or more, use
[SKIP B / F] to turn the page.
Timer Programming
3 Enter the date using [U / D], then
0:00 THU 06/12
press [P].
Date
06/12
07/12
07/12
Start
7:00
9:00
End
9:00
9:30
18:00
CH
P10
P08
P08
PDC
Each time you press [D] at the current date, the
timer recording date will change as follows.
17:00
e.g., 1st January
New Program
01/01
1/1
Daily
M-F (Mon.-Fri.)
W-SAT
The
icon will appear on the front panel display
and the unit enters to the timer-standby mode.
W-FRI
Note
• If you have not set the clock, the clock setting
window will appear instead of the Timer
Programming list. Continue from step 4 in “Manual
Clock Setting” on page 25 before programming the
timer.
W-SUN
31/01
• Use [L / P] to move the cursor to the left and the
right in the entry screen for the timer programming.
• If a basic recording or One-touch Timer Recording is
in progress on one component (e.g. VCR) and the
timer recording set for the other component (e.g.
DVD) is about to begin, the unit automatically
switches to the programmed channel for timer
recording 2 minutes before the programmed starting
time, and the recording in progress (for VCR) will be
cancelled UNLESS their recording channels are the
same. If their recording channels are the same, the
timer recording will start without cancelling the
recording currently in progress. In this case, the
recording of the same channel will be made on both
DVD and VCR.
Timer Programming
0:00 THU06/12
Date
01/01
REC To
DVD
Start
--:--
Mode
End
--:--
CH
P01
PDC
OFF
SP
SP
2:00
1/1
4 Enter the time to start and to end
using [U / D], then press [P].
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 34 Monday, March 26, 2007 10:14 AM
• Cancel the timer-standby mode by pressing
[TIMER SET] before operation for either DVD or
VCR. When finished operating, press [TIMER SET]
to resume the timer-standby mode.
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which
is not currently timer-programmed.
4
A) To delete the timer programme:
1) Select the programme you want to delete using
[U/ D], then press [ENTER].
2) Select “Delete” using [U/ D], then press
[ENTER].
Confirmation window will appear.
3) Select “Yes” using [U/ D], then press
[ENTER].
B) To correct the timer programme:
1) Select the programme you want to correct
using [U/ D], then press [ENTER].
2) Select “Program Change” using [U/ D], then
press [ENTER].
PDC (Programme Delivery Control)
The Programme Delivery Control (PDC) assures that
the TV programmes you have programmed for timer
recording are recorded exactly from beginning to end,
even if the actual broadcasting time differs from the
scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a
3) Correct the timer programme by using
[U/ D/ L/ P], then press [ENTER].
5 Press [TIMER PROG] to exit.
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.
6 Press [TIMER SET] to return to the
timer-standby mode.
To check the timer programming in process
Press [TIMER PROG].
If the PDC signal drops out because the broadcast
signal is weak, or if a broadcasting station does not
transmit a regular PDC signal, the timer recording is
performed in normal mode (without PDC) even if it
was programmed for PDC. If the starting time of the
PDC timer recording is between 0:00 and 3:59 on a
given day, the PDC function will operate from 20:00
on the previous day to 4:00 on the next day. If the
starting time of the PDC timer recording is between
4:00 and 23:59 on a given day, the PDC function will
operate from 0:00 on the given day to 4:00 on the
next day. This means that if the relevant programme
is broadcasted within this period, it is recorded
correctly. If the timer is not programmed correctly, the
incorrect timer setting stays in effect unless you
cancel it. To cancel an incorrect timer setting, refer to
“Checking, Cancelling or Correcting the Timer
Programming Information” below.
Note
• If a timer recording is proceeding, that programme is
highlighted in red. In such a case, you cannot select
any other programmes.
• When you check the timer programming in progress
by pressing [TIMER PROG] during operations of the
component (DVD or VCR) which is not currently
used for the timer recording, the programme will not
be highlighted. In this case, you cannot select other
programmings.
To Stop the Timer Recording in
Progress
On the front panel of the unit, press
[
[
S
O
(STOP)] to stop the disc recording or
/S (STOP / EJECT)] to stop the tape
Checking, Cancelling or Correcting
the Timer Programming Information
recording.
1 Press [TIMER SET] so that the
icon disappears from the front panel
display.
Note
• [STOP S] on the remote control is not effective.
2 Press [TIMER PROG].
Timer Programming list will appear.
3 Check the information on the list you
want to edit.
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 35 Monday, March 26, 2007 10:25 AM
• If there is no tape or a tape with a record tab is not in
the cassette compartment, the VCR on the front
panel display will flash and the timer recording
cannot be performed. Please insert a recordable
tape.
• When all timer recordings are complete, the
icon flashes. To play back or eject the recorded disc,
press [TIMER SET], and then press [PLAY P] or
[OPEN / CLOSE O].
If the Timer Programming did not
Complete Correctly
The error number appears on the Timer Programming
list.
Timer Programming
• The timer recording cannot be performed in DVD
and VCR at the same time. If you set two
programmings with the same channel and time both
in DVD and VCR, the programming that has priority
will be recorded.
0:00 THU 06/12
Date
E40 06/12
Start
7:00
End
9:00
CH
P11
PDC
New Program
• You cannot make any DVD operation during DVD
timer recording.
• You cannot make any VCR operation during VCR
timer recording.
1/1
The error programme will be displayed in grey
with an error number.
• If the Start and End times are same, the length of
the recording will be set for 24 hours. If the disc or
tape becomes full during recording, the unit will turn
itself off. To continue recording, press [TIMER SET]
to cancel the timer-standby mode, insert a
recordable disc or tape and press [TIMER SET]
again.
• When 2 or more programmes are overlapped,
“Timer program overlapped” appears, and the
overlapped programme will be displayed in blue. To
correct the timer programme refer to “Checking,
Cancelling or Correcting the Timer Programming
Information” on page 34.
• If the Start time is earlier and the End time is later
than the current time, the recording will start
immediately after you press [TIMER SET].
• If a videotape ends during the timer recording, the
unit will automatically stop, eject the videotape, and
turn itself off. To continue recording, insert a
recordable tape.
The error numbers indicate:
E1–E22,
E37–E39: Recording error
E23–E24: Unrecordable disc
E25
: • Copy prohibited programme
• Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28: Copy prohibited programme
E29
E30
E31
: Disc protected
: Disc full
: Already recorded 99 titles (Video
mode)
E32
E33
E34
E35
E36
E40
: Already recorded 99 titles (VR mode)
: Already recorded 999 chapters
: No space for Control Information
: PCA (Power Calibration Area) full
: Already finalised Video format disc
: • There are some unrecorded parts due
the overlapped timer programmes.
• Recording did not start at the start
time.
Priority of overlapped settings
The unit records programmes according to priority if
the timer programmes overlap.
• There is no tape in the cassette
compartment.
• Tape recording reaches to the tape
end during timer recording.
: Power failure
If the starting time is same:
• The timer programming set first (PROG. 1) has
priority.
E41
E42
E43
E44
E45
E46
PROG. 2
recording
PROG. 1
: No disc
will start
after
: Already 49 titles recorded (+VR mode)
: Already 254 chapters recorded (+VR mode)
: Copy prohibited programme
: It is impossible to record additionally on
a disc recorded by other units when
setting “Make Recording Compatible”
to “OFF”. (+VR mode)
PROG. 2
PROG. 1
recordingis
completed.
Actual
recording
PROG. 1
PROG. 2
The first 2 minutes (at the longest) will be cut off.
When the starting time and the ending time for
each programmes are different:
• A programme that has earlier start time has priority.
The error programme will be deleted once you
check the error in the programme list, or once you
cancel the timer-standby mode and re-enter it.
PROG. 1
PROG. 2
Hints for the Timer Recording
PROG. 3
• If there is a power failure or the unit is unplugged for
more than 30 seconds, the clock setting and all
timer settings will be lost.
Actual
PROG. 1
PROG. 3
PROG.
2
recording
The first 2 minutes (at the longest) will be cut off.
• If there is no disc or an unrecordable disc in the tray
(finalised DVD-RW/-R, finalised DVD+R, a fully
recorded disc, etc.), the DVD on the front panel
display will flash and the timer recording will not
occur. Insert a recordable disc.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 36 Monday, March 26, 2007 10:14 AM
If the recording time is partially overlapped:
• The timer programming with the earlier start time
(PROG. 2) has priority. PROG. 1 will start after
PROG. 2 recording is complete.
Satellite Link
You can set the unit to start recording whenever it
detects the video scart control from the external tuner.
PROG. 1
PROG. 2
Preparing for the Satellite Link Timer Recording:
Actual
recording
PROG. 2
PROG. 1
[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner’s manual on how
to set the timer.)
The first 2 minutes (at the longest) will be cut off.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not
recorded.
PROG. 1
PROG. 2
• Make sure to turn off the external tuner when
you finish setting.
Actual
recording
PROG. 2
[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
Note for DVD recording
• If the recording time of two programmes are
overlapped, or the End time of a programme and the
Start time of another is same, the first 2 minutes (at
the longest) of the subsequent programme will be
cut off.
External tuner
(not supplied)
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
Scart cable (not supplied)
• If PROG. 1 is a DVD recorded programme, the
beginning of PROG. 2 may be cut off.
DVDVCR
AV2(DECODER)
DVD
ANTENNA
IN
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT
OUT
VIDEO OUT
PROG. 1
Y
PB
L
/CB
COAXIAL
AV1(TV)
PR
R
PROG. 2
/CR
OUT
Actual
recording
PROG. 1
PROG. 2
1 Press [SAT.LINK].
The first 2 minutes
(at the longest) will be cut off.*
2 Select the time, media or mode using
*If the cut off time exceeds 3 minutes, the error
number “E40” will appear in the Timer Programming
list.
[U/ D], then press [ENTER].
Satellite Link
DVD
VCR
DVD
Start
0:00
Mode
XP
To Standby Mode
3 Set the desired start time using
[U/ D], then press [P].
• The hour can be selected among 0-23.
• Repeat this step to set the desired minutes.
4 Select the recording media using
[U/ D], then press [P].
5 Select the recording mode using
[U/ D].
Refer to “Recording Mode” on page 26 for DVD or
page 72 for VCR.
• If you want to edit the time, media or mode
press [L], then press [U / D] to correct them.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 37 Monday, March 26, 2007 10:14 AM
6 Press [ENTER].
Example 1
Example 2
Example 3
“To Standby Mode” is highlighted.
Timer
Recording
Satellite Link
Satellite Link
Actual
Recording
DVD
Start
3:00
Mode
XP
VCR
DVD
To Standby Mode
Timer
Recording
Satellite Link
7 Press [ENTER] again.
In a second, the unit will be turned off
automatically as it goes into the Satellite Link
standby mode.
Actual
Recording
• Until the time you set in “Start”, the clock will
appear on the front panel display.
• “Sat” will appear on the front panel display at the
start time.
Timer
Recording
Satellite Link
Actual
Recording
To cancel the Satellite Link function while in the
Satellite Link standby mode:
Press [TIMER SET] to turn on the unit.
To cancel the Satellite Link function while the
Satellite Link Recording is in progress:
Press [S(STOP)] on the front panel of the unit.
Note
• If you have not set the clock, the clock setting
window will appear at step 1. Follow to step 4 in
“Manual Clock Setting” on page 25.
• You cannot set the End time for the Satellite Link
Timer Recording on this unit.
• Recording picture will be distorted if the copy
protection signal is being detected during Satellite
Link Timer Recording.
• When a regular Timer Recording and the Satellite
Link Timer Recording are overlapped, the examples
are given below.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 38 Monday, March 26, 2007 10:14 AM
2 When you want to record to the disc:
Press [DVD].
Settings for External Equipment
Press [OPEN / CLOSE O] to open the
disc tray, then place the disc to
record on.
Press [OPEN / CLOSE O] again to
close the disc tray.
Connection to External Equipment
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
VCR
DVD+R
When you want to record to a tape:
Press [VCR].
Insert the tape with a record tab into
the cassette compartment.
Connect the external equipment using either the input
jacks, AV1, AV2 (Rear) or AV3 (Front). However, for
AV3 jacks, you have to select S-VIDEO input or
VIDEO input jacks depending on the connected
devices.
3 Select the input terminal to which the
external equipment is connected.
(AV1, AV2, or AV3)
Use a commercially available Scart, S-Video or Video
cable and an Audio cable for this connection.
To use the input jacks on the back of the unit,
select the “AV1” or “AV2” position by pressing
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
[INPUT SELECT
] on the remote control or
using [PROG.
/
].
To use the input jacks on the front of this unit,
select “AV3” position by pressing
2 Select “Video” using [U/ D], then
[INPUT SELECT
] on the remote control or
press [ENTER].
using [PROG.
/
].
• You can also select the input terminals by using
3 Select “Select Video” using [U/ D],
[the Number buttons]
.
then press [ENTER].
- For AV1, press [0], [0], [1].
- For AV2, press [0], [0], [2].
- For AV3, press [0], [0], [3].
4 Select the input jack type to be used
using [U / D], then press [ENTER].
4 Select a recording mode using
[REC MODE].
General Setting
Playback
Refer to “Recording Mode” on page 26 for DVD or
page 72 for VCR.
Display
Video
TV Aspect
Select Video
5 Press [I REC] (DVD / VCR) on the
Recording
Clock
Channel
DivX
Select Video - AV3(Front)
unit to start recording.
Video In
S-Video In
6 Press the PLAY button on the
Reset All
external recording component.
7 For disc:
Press [S (STOP)] on the unit to stop
recording.
• If you want to use VIDEO input jack (Composite),
select “Video In”.
• If you want to use S-VIDEO input jack, select
“S-Video In”.
For tape:
Press [O/S (STOP / EJECT)] on the
unit to stop recording.
5 Press [SETUP] to exit.
Note
Recording from External Equipment
• During recording, if a signal other than PAL is
detected (such as NTSC), recording is paused.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off when it is connected to AV2.
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
VCR
DVD+R
Before recording from external equipment, see page
20 for connection instructions.
1 Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 39 Monday, March 26, 2007 10:14 AM
8 Press [DVD].
Make sure to select a recording mode using
[REC MODE]. (See page 26.)
Dubbing Mode
Video
DVD-RW
VR
DVD-RW
9 Press [DUBBING].
DVD-R
DVD+RW
VCR to DVD duplication will start.
VCR
DVD+R
10 Press [STOP S] to stop the
You can copy a DVD disc to a videotape or copy a
videotape to a DVD disc. This function will be
available only if the DVD disc or the tape is not copy-
protected. Before starting this function, prepare for the
recording on the DVD-RW/-R, DVD+RW/+R disc or
the videotape. See pages 26 and 72.
recording.
Note for VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture
may be distorted because of the auto tracking
function. This is not a malfunction. Be advised to
play back the tape until the picture is stabilised, then
set the starting point which you wish to start
recording, and start VCR to DVD duplication.
• This unit will automatically stop the duplication if
playback with no image detected for more than 3
minutes during VCR to DVD duplication.
• If the playback sound mode of VCR is set to
“STEREO”, “LEFT” or “RIGHT”, the sound mode
upon dubbing is automatically switched to
“STEREO”. If the playback sound mode is set to
“MONO”, the sound mode upon dubbing is also
“MONO”.
Note for recording to a tape:
• The tape’s record tab is intact.
• The videotape is long enough to record the DVD
disc.
Note for recording to a disc:
• The DVD disc is satisfied with the recording status.
See page 26.
Insert a disc and a tape with a record
tab.
• If you set “External Input Audio” to “Stereo”, the
sound is recorded in “Stereo” (Video mode, VR
mode and +VR mode).
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
• While in Video mode or +VR mode, if you set
“External Input Audio” to “Bilingual”, the audio set in
“Bilingual Recording Audio” mode is recorded.
While in VR mode, if you set “External Input Audio”
to “Bilingual”, bilingual audio is recorded.
• The main and sub audio will be simultaneously
recorded (VR mode). You can select audio modes
during playback.
2 Select “Recording” using [U/ D],
then press [ENTER].
3 Select “Dubbing Mode” using
[U/ D], then press [ENTER].
Option window will appear.
• If you want to watch the duplicated material, after
the VCR to DVD duplication, press [DVD] first then
press [PLAY P].
VCR to DVD
DVD to VCR
4 Select “VCR
DVD” using [U/ D],
then press [ENTER].
4 Select “DVD
VCR” using [U/ D],
then press [ENTER].
General Setting
Playback
Display
Video
General Setting
Playback
Display
Video
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Auto Chapter
Recording Audio Select (XP)
il
Recording
Clock
Dubbing Mode
Video mode)
DVD
e
Recording
Clock
Dubbing Mode
VCR
DVD
Channel
DivX
Reset All
Video mode)
DVD
VCR
Compatible
VCR
DVD
Channel
DivX
Reset All
Bilingual Recording Audio
External Input Audio
VCR
Compatible
Bilingual Recording Audio
External Input Audio
5 Press [SETUP] to exit.
5 Press [SETUP] to exit the Setup
6 Press [VCR].
menu.
7 Press [PLAY P], and then press
[PAUSE p] at the point you wish to
start recording.
6 Press [DVD].
7 Press [PLAY P], and then press
[PAUSE p] at the point you wish to
start recording.
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 40 Monday, March 26, 2007 10:14 AM
8 Press [VCR].
Make sure to select a recording mode using
[REC MODE]. (See page 72.)
Rewind or fast forward the tape to the point where
you want to start recording.
Setting a Disc to Protect
VR
DVD-RW
DVD+RW
DVD+R
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using the
Setup menu.
9 Press [DUBBING].
DVD to VCR duplication will start.
10 Press [STOP S] to stop the
Insert a recordable disc.
recording.
1 In stop mode, press [SETUP].
Note
2 Select “DVD Menu” using [U/ D],
• NTSC dubbing is prohibited in this unit.
• Dubbing Mode is available only if the tape or disc is
not copy-protected.
• You cannot change the output mode during VCR to
DVD or DVD to VCR duplication.
then press [ENTER].
3 Select “Disc Protect OFF
ON”
using [U/ D], then press [ENTER].
• If you want to watch the duplicated material, after
the DVD to VCR duplication, press [VCR] first and
then press [PLAY P].
4 Select “Yes” using [U/ D], then
press [ENTER].
The disc is protected.
5 Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
• You can select only “Disc Protect ON
when a protected disc is inserted.
OFF”
To cancel the disc protect:
• Select “Disc Protect ON
select “Yes”.
OFF” at step 3, then
• If you insert a disc protected with this unit, “Disc
Protect ON OFF” will appear instead of
“OFF ON”.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 41 Monday, March 26, 2007 10:14 AM
5 Finalising is complete.
Hint
Finalising Discs
• Finalising a disc in Video mode and +VR mode
automatically creates a Title menu.
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
• After you finalise the DVD+RW disc, you can call up
the title list by pressing [TOP MENU], or you can call
up the Title menu by pressing [DISC MENU].
• Even after DVD+RW disc is finalised, you can still
record or edit. After you finalise DVD-RW/-R or
DVD+R disc, you cannot edit or record anything else
on that disc.
DVD+R
You will need to finalise discs to play them back in
other players.
Finalising may take from several minutes up to an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
• To release the finalisation of the disc, select “Undo
Finalise” at step 3.
• To release the finalisaion of the DVD+RW disc,
make an additional recording to the disc.
• For DVD+RW disc, if you have added or deleted
chapters, or made chapters hidden, you must
finalise the disc before being able to see those
effects on other units. To play back discs other than
DVD+RW disc on other DVD players, you will need
to finalise.
Insert a recordable disc before
finalising.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U/ D],
then press [ENTER].
Note
3 Select “Finalise” using [U/ D], then
• If you insert a DVD-RW disc finalised with this unit,
“Undo Finalise” will appear instead of “Finalise”.
• DO NOT power off during finalising. This may result
in a malfunction.
press [ENTER].
4 Select “Yes” using [U / D], then
press [ENTER].
e.g.) VR mode DVD-RW disc
Auto Finalise
Video
DVD Menu
Format
Finalise
Disc Protect OFF
Delete All Playl
DVD-RW
DVD-R
DVD+R
ON
Finalise disc?
You can finalise discs automatically when the disc
space runs out if you set this in the Setup menu.
Yes
No
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
2 Select “Recording” using [U / D],
Finalising will start.
then press [ENTER].
To cancel finalising (DVD-RW disc only):
3 Select “Auto Finalise” using [U/ D],
At step 4, press [STOP S]. Select “Yes” using
[U / D], then press [ENTER]. Finalising is
cancelled and the unit switches to stop mode.
then press [ENTER].
4 Select “ON” using [U/ D], then
press [ENTER].
General Setting
Do you want to cancel ?
Yes
No
Playback
Display
Video
Recording
Clock
Channel
DivX
Auto Chapter
Select (XP)
deo mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Auto Finalise
ON
OFF
Reset All
Finalising
10%
If
appears when [STOP S] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
5 Press [SETUP] to exit.
Note
If “No” is selected and [ENTER] or [RETURN] is
pressed, finalising is continued.
• Auto finalise function is not available for discs
formatted in VR mode.
You cannot cancel finalising a DVD-R and
DVD+RW/+R disc once it has started.
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 42 Monday, March 26, 2007 10:14 AM
Playback
7 Select the desired title using
[U/ D / L/ P], then press [ENTER].
Pop up window will appear.
Basic Playback
8 Select “Play From Start” using
[U/ D], then press [ENTER].
Playback will start.
Hint for DVD Playback
The contents of a DVD are generally divided into
titles. Titles are sometimes further subdivided into
chapters.
9 Press [STOP S] to stop playback.
Start Rec.
Stop/Start
Stop Rec.
To eject the disc, press [OPEN / CLOSE O] to
open the disc tray, then remove the disc. Press
[OPEN / CLOSE O] to close the disc tray before
turning off the unit.
Title 1
Title 2
Hint
• For DVD-R (Video mode), DVD-RW (Video mode)
and DVD+R discs that are already finalised, a Title
menu will be displayed instead of thumbnails.
• After you finalise the DVD+RW, you can call up the
title list by pressing [TOP MENU], or you can call up
the Title menu by pressing [DISC MENU].
• You can resume playback from where you stopped
playing back the disc (Resume playback).
See page 48 for details.
Chapter 1 Chapter 2 Chapter3
Chapter 1 Chapter 2
Playing Back a DVD-RW / DVD-R /
DVD+RW / DVD+R Disc
• You can also start playback by pressing [PLAY P]
instead of [ENTER] at step 7.
Video
DVD-RW
VR
DVD-RW
DVD-R
DVD+RW
Note
• Some discs may start playback automatically.
DVD+R
1 Press [
ON / STANDBY] to turn on
Playing Back a DVD-V / Video CD
(without PBC Function)
the unit.
Turn on the TV and be sure to select the input to
which the unit is connected.
DVD-V
VCD
2 Press [DVD].
1 Follow steps 1 to 5 in “Playing Back
a DVD-RW / DVD-R / DVD+RW /
DVD+R Disc”.
3 Press [OPEN / CLOSE O] to open the
disc tray.
4 Place the disc on the disc tray with
its label facing up. Be sure to align
the disc with the disc tray guide.
2 Press [PLAY P] to start playback.
Playback will start.
If you are playing back a DVD-Video, a menu may
appear.
See pages 46 - 47 for details.
3 Press [STOP S] to stop playback.
Note
Disc tray
guide
• Some discs may start playback automatically.
• For playing back a Video CD with PBC function, see
page 47.
5 Press [OPEN / CLOSE O] to close
the disc tray.
6 Press [TOP MENU] to display the title
list.
You can switch between the “Original” and
“Playlist” in the VR mode using [DISC MENU].
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 43 Monday, March 26, 2007 10:14 AM
It is recommended that files to be played back in
this unit are recorded under the following
specifications:
Playing Back an Audio CD, MP3 or
JPEG
[MP3]
• Sampling frequency : 44.1 kHz or 48 kHz
CD
MP3
JPEG
• Constant Bit Rate
: 112 kbps to 320 kbps
1 Follow steps 1 to 5 in “Playing Back
a DVD-RW / DVD-R / DVD+RW /
DVD+R Disc” on page 42.
[JPEG] Size of picture
• Upper limit
• Lower limit
: 6,300 x 5,100 dots
: 32 x 32 dots
: less than 12 MB
• Capacity limit
The File List will appear.
Note
File List
• MP3 files cannot be recorded as digital sound using
an MD or DAT deck.
DISC NAME
• Files with extensions other than “.mp3 (MP3)” or
“.jpg / .jpeg (JPEG)” will not be listed in the File List.
• Some folders or tracks listed in the File List may be
unplayable due to their recording status.
• The File List displays only up to 8 folder and file
names.
A
B
1
2
3
4
5
6
JPEG file1
JPEG file2
MP3 file1
MP3 file2
MP3 file3
MP3 file4
Notes on JPEG:
After file is displayed for 5 seconds or 10 seconds (set
in the “Slide Show” on page 54), the display moves to
the next file.
During JPEG playback, press [P] or [L] to rotate a
picture 90 degrees clockwise or counterclockwise
respectively. (Not available when the display menu
appears.)
1/ 2
To exit the File List, press [TOP MENU] again or
press [STOP S].
To resume the File List, press [TOP MENU].
2 Press [U/ D] to select the desired
folder or track / file, then press
[ENTER].
Playing Back a DivX®
If a track / file is selected:
Playback will start.
®
®
DivX
If a folder is selected:
The files in the folder will appear.
Press [U/ D] to select the folder you want, then
press [ENTER].
• Press [PLAY P], [ENTER] or [P] to move to
any lower folders.
1 Follow steps 1 to 5 in “Playing Back
a DVD-RW / DVD-R / DVD+RW /
DVD+R Disc” on page 42.
The File List will appear.
• Press [L] or [RETURN] to move back to the
folder above.
File List
DISC NAME
Hints for Audio CD tracks and MP3 / JPEG
files:
Folder1
Folder2
1 DivX File1
2 DivX File2
• Folders are shown with the
• Audio CD tracks are shown by
• MP3 files are shown with the
icon.
icon.
icon.
Playback will start from the selected track and
continue with each one after.
• JPEG files are shown with the
icon.
• The unit can recognise up to 255 folders and up
to 99 tracks / 999 files.
1/ 1
To exit the File List, press [TOP MENU] again or
press [STOP S].
To resume the File List, press [TOP MENU].
• Letters of a file / folder name overflowing the
given space will be displayed as “…”.
• Unplayable folders and tracks / files may be
displayed depending on the recording
conditions.
• For MP3 file recorded in Variable Bit Rate
(VBR), the unit may not display the actual
elapsed time.
2 Press [U/ D] to select the desired
folder or file, then press [ENTER].
If a file is selected:
Playback will start.
• If there are no files in the folder, “No Files” is
displayed.
• High resolution or large-size JPEG files take a
few moments to be displayed.
• It is not possible to play back progressive
JPEGs (JPEG files saved in progressive format)
on this unit.
• It is not possible to play back JPEG files of 12
MB or more.
If a folder is selected:
The files in the folder will appear.
Press [U/ D] to select the file or folder you want,
then press [ENTER].
• Press [PLAY P], [ENTER] or [P] to move to
any lower folders.
• Press [L] or [RETURN] to move back to the
folder above.
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 44 Monday, March 26, 2007 10:14 AM
Hint for the purchased or rental official DivX®
Certified product
DivX® Subtitle
• When you purchased or rental a DivX® file through
the official site of DivX® Video which is called DivX®
Video-On-Demand (VOD) services, a registration
code is required every time you get the new file from
the DivX® VOD services. Refer to “DivX® VOD” on
page 45.
The subtitle created by the user can be displayed
during DivX® playback.
1 After the DivX® file is selected, the
Subtitle List will appear.
• Some DivX® VOD files are restricted with the limited
playable times (you cannot play them back beyond
the limit). If your DivX® VOD file has such limit, the
playback confirmation screen will appear.
Subtitle List
DivX File1
OFF
SMI
SRT
SUB
ASS
SSA
TXT
Use [L/ P] to select “Yes” if you want to play back
the file, or to select “No” if you do not wish to play it
back. Then press [ENTER] to confirm the selection.
R
DivX VOD Rental
2 Select the desired extension you
want to display using [U/ D], then
press [ENTER]. DivX® with the
subtitle starts playback. The subtitle
cannot be displayed when the
setting is “OFF”.
This rental has
Do you want to use one
of your views now?
views left.
Yes
No
• If there is more than one extension, the
extension selection will appear in the Subtitle
List.
• You cannot play back the DivX® VOD files of which
rental period has been expired. In such case, press
[TOP MENU] and select other files that can be
played back.
Note
• “DivX Subtitle” must be activated in the DivX Menu.
(Refer to “DivX Subtitle” on page 70.)
• Playback file and the subtitle file must have the
same name.
Rental Expired
• Playback file and the subtitle file must locate in the
same folder.
This rental is expired.
Please push ‘TOP MENU’.
• Only the subtitle files with the following extensions
are supported; .smi (.SMI), .srt (.SRT), .sub
(.SUB), .ass (.ASS), .ssa (.SSA), .txt (.TXT). (.sub
(.SUB) and .txt (.TXT) files may not be recognised.)
• The subtitles that exceed the playback time of the
DivX® file will not be displayed.
Hint
• DivX® is a codec (compression/decompression) that
can compress images to a very small amount of
data. The software can compress video data from
almost any sources to the size that can be sent on
the Internet without compromising visual quality of
the images.
• A file with an extension of “.avi” and “.divx” is called
an DivX® file. All files with the “.avi” extension are
recognised as MPEG4.
• Files whose extension other than “.avi” and “.divx”
will not be listed on the DivX® menu. However,
unplayable groups or tracks may be displayed,
depending on the recording conditions.
• Even if the file has an extension of either “.avi” and
“.divx”, this unit cannot play it back if it is recorded in
the format other than DivX®.
It is recommended that files to be played back in
this unit are recorded under the following
specifications:
[DivX®]
• Official DivX® Certifiedproduct
• Playable Codec of AVI files : DivX®3.x,
DivX®4.x,
DivX®5.x,
DivX®6.x
• Maximum size of image
: 720 x 480 @30 fps
720 x 576 @25 fps
• Sampling frequency of audio: 8 kHz - 48 kHz
• Audio type
: MPEG1 audio layer 3
(MP3), MPEG1
audio layer 2,
Dolby Digital
• Folders are known as Groups; files are known as
tracks.
• A symbol of
is shown on the top of the file name.
• A maximum of 255 folders or 999 files may be
recognised in one disc.
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 45 Monday, March 26, 2007 11:07 AM
• Up to 8 hierarchies can be recognised in one folder.
Files in the 9th or deeper hierarchies cannot be
played back.
• If the track extends beyond the scope of screen, a
down arrow “ ” appears, indicating that the user
can view another part on the previous page. The
current page number and the number of total pages
are shown on the right of the down arrow “ ”.
• Letters of a file / folder name overflowing the given
space will be displayed as “…”.
AUTHORIZATION ERROR
This player is not authorized to
play this video.
Please push ’TOP MENU’.
• You can play back the disc recorded in multi-
session.
• It may take awhile for audio and images to be output
after you inserted a disc and pressed [PLAY P].
• When playing back the files recorded in high bit
rates, the images can be interrupted in some
occasions.
DivX® VOD
®
®
DivX
• Although DivX® logo has been obtained for this unit,
it may not be able to play back some data,
depending on the characteristics, bit rates, or audio
format settings, etc.
This unit allows you to play back the files purchased
or rented from DivX® Video-On-Demand (VOD)
services. The files are available on the internet.
When you purchase or rent DivX® VOD files on the
internet, you will be asked to enter a registration
code. This menu item provides you with the
registration code.
• Use the software recognised by the DivX, Inc. when
you make DivX® files.
• A DivX® file whose file size exceeds 2 GB cannot be
played back.
• If you try to play back the DivX® file that has the
screen resolution which this unit does not support,
the playback will be stopped and error message will
appear.
• If a large-sized DivX® file is selected, it may take
awhile to start the playback (over 20 seconds
sometimes).
• If DivX® files written on CD discs cannot be played
back, rewrite them on a DVD disc and try to play
back.
• For more information for DivX®, please visit
1 Press [SETUP].
2 Select “General Setting” using
[U / D], then press [ENTER].
3 Select “DivX” using [U / D], then
press [ENTER].
4 Select “DivX®VOD” using [U / D],
then press [ENTER].
• If you insert a CD-RW/-R with DivX® files that are
mixed with MP3 and JPEG files, the Playback Media
Selection screen will be displayed. Please select
“Video” and proceed to next step.
General Setting
Playback
Display
Video
Recording
Clock
DivX
DivX Subtitle
®VOD
Channel
DivX
Reset All
Please select the media
to play back.
Video
Audio & Picture
Your registration code will appear.
DivX®VOD
Your registration code is :
• Press [DISC MENU] to call up the Playback Media
Selection screen in stop mode.
• If you select “Audio & Picture” instead of “Video” on
the Playback Media Selection screen, this unit can
play back MP3/JPEG files.
To learn more visit :
• You cannot play back the DivX® VOD files obtained
with different registration codes this unit. Press
[TOP MENU] and select other files that can be
played back.
• This unit does not support the DivX® file with UDF
format.
Note
• One registration code is only valid for one DivX®
VOD file.
• You must first download the file from the internet
and play it back on this unit before you are able to
get another code.
• You must follow this step every time you purchase
or rent a DivX® VOD file from the internet.
• For more information for DivX®, please visit
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 46 Monday, March 26, 2007 10:14 AM
Playing Back Discs Using the Disc
Menu
Playing Back a Disc Using the Title
Menu
Video
DVD-RW
DVD-V
DVD-V
DVD-R
DVD+RW
A DVD contains a disc menu, which lists the contents
and enables you to customise playback. The menu
may offer choices for subtitle languages, special
features, and chapter selection. Usually this
information appears automatically when you start
playback, but sometimes you need to press
[DISC MENU] to display the menu.
DVD+R
Some DVDs have a Title menu, which lists the titles
available on the DVD. You can start playing back such
discs at a specific title.
On this unit, if you finalise Video mode or +VR mode
discs, a Title menu will be created automatically.
Press [DVD] first.
Press [DVD] first.
1 Press [TOP MENU].
1 Press [DISC MENU].
The Title menu will appear.
• For some discs, the Title menu appears
automatically.
If the feature is not available,
the TV screen.
may appear on
2 Select an item using [U/ D/ L / P],
If the feature is not available,
the TV screen.
may appear on
then press [ENTER].
Repeat this step until all the features you want are
set up or to start playing back the disc from the
menu. The following operations are available.
2 Select a desired item using
[U/ D / L/ P], then press [ENTER].
[DISC MENU] button:
Displays the disc menu, which will vary among
discs.
The disc will start playing back at the title you
selected. The following operations are available.
[TOP MENU] button:
Displays the DVD “Title Menu” which will vary
between discs.
[U/ D/ L/ P] buttons:
Move the cursor from item to item on the screen.
[ENTER] button:
Selects the currently highlighted menu option.
[U/ D/ L/ P] buttons:
Move the cursor from item to item on the screen.
[the Number buttons]:
Selects a numbered menu option (available on
certain discs).
[ENTER] button:
Selects the currently highlighted menu option.
[the Number buttons]:
Selects a numbered menu option (available on
certain discs).
3 Press [DISC MENU] to exit the disc
menu.
3 Press [TOP MENU] to exit.
Note
• Menus vary among discs. Refer to the information
accompanying the disc for details.
Note
• [TOP MENU] will not be available for some DVDs.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• For DVD+RW discs finalised on this unit, press
[DISC MENU] to display the Title menu.
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 47 Monday, March 26, 2007 10:14 AM
Cancelling and Recalling the PBC
Function
PBC Function for Video CDs
VCD
VCD
This unit conforms to ver.1.1 and ver.2.0 of the Video
CD standard playback control (PBC) function. This
enables you to play back interactive software using
menu screens. Refer to the information
(PBC OFF)
Insert a Video CD.
accompanying the Video CD.
Ver.1.1 (without PBC function): You can still enjoy
playback of pictures and music from the CD.
Ver.2.0 (with PBC function): “Pbc” will appear on the
screen and display when playing back a Video CD
with the PBC function.
1 In stop mode, press [SETUP].
2 Select “CD Playback Mode” using
[U/ D], then press [ENTER].
3 Select “PBC (Video CD only)” using
Hint
[U/ D], then press [ENTER].
• When playing back Video CDs with the PBC
function, “Pbc” is displayed instead of the playing
back time and current track indications on the front
panel display.
CD Playback Mode
Random Play
Program Play
PBC (Video CD only)
Slide Show
Note
• Some operations cannot be performed unless the
function is cancelled either automatically or
intentionally by you.
• Operations that are not available when the PBC
function is set to “ON” are indicated by the following
symbol in this manual:
VCD
(PBC OFF)
4 Select “OFF” using [U/ D], then
press [ENTER].
5 Press [SETUP] to exit.
Playing Back a Video CD Using the
Title Menu
To recall the PBC function, select “ON” at step 4
above.
Note
VCD
• The default setting of “PBC (Video CD only)” is
“ON”.
1 When playing back a Video CD with
the PBC function, the Title menu will
appear automatically.
2 Press [the Number buttons] to select
the desired title.
Playback will start at the selected title.
3 Press [RETURN] to go back to the
Title menu.
Note
• While the On-Screen Display appears, you cannot
perform steps 2 and 3.
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 48 Monday, March 26, 2007 10:14 AM
Hint
• Forward / reverse speeds are indicated with icons
as follows.
Special Playback
Forward (Approx. Speed):
2x:
20x:
40x:
Resume Playback
Video
VR
DVD-RW
DVD-V
DVD+RW
JPEG
DVD-RW
DVD-R
VCD MP3
Reverse (Approx. Speed):
5x:
20x:
40x:
DVD+R
CD
(PBC OFF)
®
®
DivX
You can resume playback from the point where you
stopped it before.
Skipping TV Commercials during
Playback
1 During playback, press [STOP S].
Video
DVD-RW
VR
DVD-RW
The resume message will appear.
DVD-V
DVD-R
2 Press [PLAY P].
DVD+RW
DVD+R
In a few seconds, playback will resume from the
point at which you stopped it before. Even if you
turn off the unit, you can resume playback at the
same point after turning back on the unit.
To enjoy recorded programmes without any
interruptions, press [INSTANT SKIP].
To cancel the resume playback and start playing
back the disc from the beginning:
Press [STOP S] while playback is stopped.
1 During playback, press
[INSTANT SKIP].
Normal playback will start 30-second advanced
point from the point at which you press
[INSTANT SKIP].
Each time you press [INSTANT SKIP], the start
point will move another 30 seconds forward and
playback resume automatically.
Note
• For Video CDs, if you turn PBC on using the Setup
menu, the resume function is cancelled.
• For MP3 and JPEG files, playback will resume from
the beginning of the track at which playback was
stopped.
You can press [INSTANT SKIP] up to 6 times
(180 seconds).
Fast Forward / Fast Reverse
Pause
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD-R
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD+RW
JPEG
DVD-R
VCD MP3
DVD+RW
DVD+R
CD
VCD MP3
DVD+R
CD
®
®
DivX
®
®
DivX
1 During playback, press [FWD f] or
1 During playback, press [PAUSE p].
[REV r].
Each time you press [FWD f] or [REV r], the
approximate speed will change as follows.
Fast forward or fast reverse playback across titles
(for DVDs) or tracks / files (for VCD / MP3 / DivX®)
is not possible.
Playback will pause with the sound muted.
2 Press [PLAY P] to resume playback.
Rapid Playback
Video
FWD
FWD
FWD
FWD
FWD
FWD
Normal
speed
playback
VR
DVD-RW
40x
REV
20x
REV
5x
REV
REV
2x
REV
20x
REV
40x
DVD-V
DVD-RW
DVD-R
DVD+RW
DVD+R
• For Audio CDs and MP3 files approximate speed
is fixed at 8x with sound.
Rapid Play function is available only
during playback.
Available only on discs recorded in the Dolby Digital
format, Rapid Play plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
• For Video CDs, approximate forward / reverse
speeds are 2x, 8x and 16x.
• For DivX® files, approximate forward speeds are
2x, 20x and 40x, and approximate reverse
speeds are 5x, 20x and 40x.
• To return to playback at normal speed, press
[PLAY P].
• Picture quality of DivX® files in fast reverse is
lower than that in fast forward.
• For some DivX® files, Fast forward/Fast reverse
may not function.
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 49 Monday, March 26, 2007 10:14 AM
1 During playback, press
Slow Forward / Slow Reverse
Playback
[1.3x/0.8x PLAY].
Px0.8: Press [1.3x/0.8x PLAY] once during
playback.
Video
DVD-RW
VR
DVD-RW
Plays back approximately at 0.8 times of
normal playback.
DVD-V
DVD-R
Px1.3: Press [1.3x/0.8x PLAY] twice during
playback.
®
®
DVD+RW
DVD+R
VCD
DivX
Plays back approximately at 1.3 times of
normal playback.
: Press [1.3x/0.8x PLAY] thrice to play
back in normal speed.
No effects.
1 During playback, press [PAUSE p],
P
then press [FWD f] or [REV r].
Each time you press [FWD f] or [REV r], the
approximate speed change as follows.
(The sound will remain muted.)
2 Press [PLAY P] to continue the
FWD
FWD
FWD
FWD
FWD
FWD
normal playback.
Pause
1/4x
REV
1
/8x
REV
1
/
1
6x
REV
REV
1
/
1
6x
REV
1
/8x
REV
1
/3x
Note
• Audio (language) setting cannot be changed while
using this mode.
To return to normal playback, press [PLAY P].
Hint
• This feature may not work at some point in a disc.
• Audio is PCM during Rapid play mode.
• When you select “PAL” in “TV System” (see page
68), this function is not available with discs recorded
using the NTSC system.
• Forward / reverse speeds are indicated with icons
as follows.
Forward (Approx. Speed):
1 / 16x:
1 / 8x:
1 / 3x:
Step by Step Playback
Video
Reverse (Approx. Speed):
VR
1 / 16x:
1 / 8x:
1 / 4x:
DVD-V
DVD-RW
DVD-RW
DVD-R
®
®
DVD+RW
DVD+R
VCD
DivX
Note
• For some DivX® files, Slow forward may not
function.
• Only slow forward is available when playing back
Video CDs and discs with DivX® files.
1 During playback, press [PAUSE p].
2 Press [SKIP B / F] repeatedly.
Each time you press [SKIP F], playback will go
forward one frame (or step) at a time with the
sound muted.
To go backward one frame (or step), press
[SKIP B].
Zoom
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD-R
JPEG DivX
Press and hold [SKIP F] to continue going
forward.
®
®
DVD+RW
DVD+R
VCD
To continue going backward, press and hold
[SKIP B].
1 During playback, press [ZOOM].
1/
5
1/
5
0:01:00 / 1:23:45
3 Press [PLAY P] to resume playback.
DVD Video
Note
× 1.2
× 1.5
× 2.0
• Only step by step forward is available when playing
back Video CDs and discs with DivX® files.
Four options are available, “x1.0”, “x1.2”, “x1.5”
and “x2.0”. These are displayed excluding the
current zoom rate.
Hint
• You can also select the zoom function by pressing
[DISPLAY]. In this case, press [DISPLAY] first,
select the
icon using [L/ P], and then press
[ENTER] within 1 second, or wait for 1 second to
display the selection menu.
2 Select the desired zoom factor to
zoom using [U/ D], then press
[ENTER].
The zoom area is displayed.
EN
49
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 50 Monday, March 26, 2007 10:14 AM
3 Select the desired zoom position
using [U / D / L/ P], then press
[ENTER].
Note
• All markers are erased when you perform the
following operations.
- Open the disc tray.
Zoom playback will start.
- Turn off the power.
- Record on a recordable disc.
- Change the mode between Original and Playlist.
(VR mode)
Hint
• To exit the zoom menu, press [ZOOM] at step 1.
• To cancel the zoom function, select “x1.0” using
[U/ D], then press [ENTER].
Chasing Playback during Recording
VR
Note
• If selecting a smaller factor than that currently
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG
files.
DVD-RW
You can play back the already recorded part of the
currently recording programme without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.
Make sure to use a DVD-RW disc in VR mode, and
the recording mode is set to LP, EP or SLP.
Marker Setup
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD-R
VCD
1 Press [PLAY B] during recording.
DVD+RW
DVD+R
CD
Playback will start from the beginning of the
programme that you are currently recording.
Screen for the current playback:
(PBC OFF)
You can assign a specific point on a disc to return
later.
1/
5
1/
5
0:01:00 / 1:23:45
RW VR ORG
-
1 During playback, press [DISPLAY].
2 Select the
icon using [L / P],
then press [ENTER] within 1 second,
or wait for 1 second to display the
marker list.
Marker setup menu for DVD-Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
If you play the fast forward playback and the
playback reaches the scene recorded 1 minute
before, the forwarding playback will automatically
return to the normal playback.
1
2
3
4
5
6
2 To stop the playback, press [STOP C]
once.
The resume message will appear.
Screen for the current recording:
3 Select the desired marker number
using [U / D]. When the disc
reaches the desired point, press
[ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
RW VR ORG
-
P10
The title (track) number and the time are
displayed.
4 To return to the marker, select the
desired marker number using
[U/ D], then press [ENTER].
Resume ON
LP
1:01
Hint
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
• To clear a marker, select the marker number you
wish to clear, then press [CLEAR].
• You can mark up to 6 points.
EN
50
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 51 Monday, March 26, 2007 10:14 AM
Chapter:
To move to
Using the [TIME SLIP] button
for chapter, press [B].
With [TIME SLIP] button, even if you leave your
couch while you are watching TV through this unit,
you can come back and watch rest of the programme
from right where you left at any convenient time with
just one button. Please make sure to put VR mode
DVD-RW disc, and set the recording mode to LP, EP
or SLP.
Enter a desired chapter number to search
using [U/ D] or [the Number buttons], then
press [ENTER].
Selected chapter playback will start.
If you play the currently recording programme and the
playback reaches the scene recorded 1 minute
before, the forwarding playback will automatically
return to the normal playback.
1 While viewing a TV broadcast via
this unit, press [TIME SLIP].
This unit start to record the TV broadcast.
2 Press [TIME SLIP] again.
3 Press [STOP C] once to stop
playback.
Playback will start from the point you press
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can
pause and resume the playback by pressing
[TIME SLIP].
The resume message will appear.
1/
5
1/
5
0:01:00 / 1:23:45
RW VR ORG
-
P10
3 To stop the recording, press
[STOP C] twice.
Note
• Playback image may freeze momentarily using this
function. However this does not affect the recording.
• The 2x fast forward playback is not available.
• [REC I] is not available during this function.
• You must cancel this function first by pressing
[STOP C] once. Then you can use [REC I] to use
OTR (one-touch timer recording) function or change
recording time for the OTR.
Resume ON
LP
1:01
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
• “Wait for a moment.” will be displayed on the screen
if you press [PLAY B] before 1 minute of recording.
• This function is available only when you are
recording on a DVD-RW disc in VR mode, with
the recording mode LP, EP or SLP.
Note
• Playback image may freeze momentarily using this
function. However this does not affect the recording.
• The 2x fast forward playback is not available.
• This function is available only when you are
recording on a DVD-RW disc in VR mode, with
the recording mode LP, EP or SLP.
• Use DVD-RW disc capable of 2x or 4x speed
recording.
• Only the titles (chapters) in the Original can be
selected. You cannot select titles from the title list.
• When you stop the playback after the Timer
recording is completed, the unit will be switched to
the timer standby mode if another programme has
been set (refer to “Hints for the Timer Recording” on
page 35).
Simultaneous Playback and
Recording
VR
DVD-RW
You can also play back a recorded title during current
recording or the Timer Recording on the same disc.
• Use DVD-RW disc capable of 2x or 4x speed
recording.
1 Press [DISPLAY] during recording.
1/
5
1/
5
0:01:00 / 1:23:45
-RW VR ORG
P10
2 Select
icon using [L/ P], then
press [ENTER].
The title number next to
will be highlighted.
Title:
Enter a desired title number to search using
[U/ D] or [the Number buttons], then press
[ENTER].
Selected title playback will start.
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 52 Monday, March 26, 2007 10:14 AM
Track Search
Search
®
®
MP3
CD
VCD
(PBC OFF)
JPEG
DivX
Title / Chapter Search
Video
Using [SKIP B/ F] buttons
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
1 During playback, press [SKIP F] to
skip the current track and move to
the next.
DVD+RW
DVD+R
Using [SKIP B/ F] buttons
The unit moves to the next track one after the
other.
To go back to the previous track, press
[SKIP B] twice in quick successions. The unit
moves backward one track at a time.
1 During playback, press [SKIP F] to
skip the current title or chapter and
move to the next.
The unit moves to the next title or chapter one
after the other.
Using the [DISPLAY] button
For audio CD, skip to step 2.
To go back to the previous title or chapter, press
[SKIP B] twice in quick successions.
1 During playback, press [DISPLAY].
2 Select the
icon using [L / P],
Using the [DISPLAY] button
then press [ENTER].
1 During playback, press [DISPLAY].
for the track number is highlighted.
2 Select the
icon using [L/ P],
3 Enter the desired track number to
search for using [U/ D] or
[the Number buttons], then press
[ENTER].
then press [ENTER].
for the title number is highlighted.
Searching for a Title:
Track search will start.
3 Enter the desired title number to
search for using [U/ D] or
[the Number buttons], then press
[ENTER].
Hint
• For Video CDs, you can perform the track search
function in stop mode without turning PBC off
manually.
Title search will start.
Hint
Note
• Total number of chapters and playback time of the
selected title are also displayed.
• During Random playback or Programme playback,
you cannot search the desired track.
Searching for a Chapter:
Direct Search
3 Press [L/ P] to highlight the number
displayed in the right side of the
icon.
CD
You can search the desired track directly.
4 Enter the desired chapter number to
search for using [U/ D] or
[the Number buttons], then press
[ENTER].
Using [the Number buttons]
1 During playback, if the display menu
is not displayed, press
[the Number buttons] to enter the
desired track number.
Chapter search will start.
Hint
• The title number and playback time of the selected
chapter are also displayed.
Note
• During Random playback or Programme playback,
you cannot search the desired track directly.
EN
52
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 53 Monday, March 26, 2007 10:14 AM
Time Search
Repeat / Random / Programme
Playback / Slide Show
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD-R
VCD DivX
®
®
DVD+RW
DVD+R
CD
(PBC OFF)
Repeat Playback
Video
For audio CD, skip to step 2.
VR
DVD-RW
DVD-V
DVD+RW
JPEG
DVD-RW
DVD-R
VCD MP3
1 During playback, press [DISPLAY].
icon using [L/ P],
DVD+R
CD
2 Select the
(PBC OFF)
®
®
then press [ENTER].
DivX
for the title or track number is highlighted.
For audio CD or MP3, skip to step 2 or press
[REPEAT] and skip to step 3.
3 Press [L/ P] to highlight
.
1 During playback, press [DISPLAY].
4 Enter the desired time to search for
Or press [REPEAT] during playback, and follow
using [U / D] or
[the Number buttons], then press
[ENTER].
from step 3.
2 Select the
icon using [L/ P], then
press [ENTER] within 1 second, or
wait for 1 second to display the
selection menu.
Time search will start.
Note
3 Select the desired option to repeat
• During Random playback or Programme playback,
you cannot search the desired time.
• The title number and chapter number of the setting
time are also displayed.
• Time search function is available only in the same
track or title.
using [U/ D], then press [ENTER].
The selected repeat playback will start.
The following operations are available.
Title:
The current title will be played back repeatedly.
(DVD only)
Chapter:
The current chapter will be played back
repeatedly. (DVD only)
All:
The current disc will be played back repeatedly.
(DVD-RW (VR mode), Audio CD, Video CD, MP3,
JPEG and DivX® only)
A-B:
The A-B point will be played back repeatedly.
(DVD, Audio CD, Video CD and DivX® only)
When pressing [ENTER] while A-B is highlighted,
A-B repeat is set.
• Press [ENTER] again to decide the starting
point (A).
• Press [ENTER] after setting point (A) to select
the ending point (B).
Track:
The current track will be played back repeatedly.
(Audio CD, Video CD, MP3, JPEG and DivX® only)
Group:
The current group will be played back repeatedly.
(MP3, JPEG (except Picture CD) and DivX® only)
Hint
• To cancel the repeat playback, select “OFF” at step
3. The repeat setting is also cancelled when you
stop playback.
• You can also select the repeat playback by pressing
[REPEAT].
Note
• You can only set A-B repeat playback within the
current title (for DVDs) or current track (for Audio
CDs, Video CDs and discs with DivX® files).
• You cannot select “Group” during the random
playback of MP3 and JPEG files.
EN
53
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 54 Monday, March 26, 2007 10:14 AM
• Chapter / Track repeat function is cancelled
whenever [SKIP B / F] is pressed.
• For some DivX® files, A-B Repeat playback may not
function.
• For Video CDs with PBC function, repeat play does
not work while the PBC function is on.
3 Select the desired track using
[U/ D], then press [ENTER] or [P].
CD Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Random Playback
CD
VCD
(PBC OFF)
MP3
JPEG
Total 0:00:00
You can use this function to play back a disc randomly
instead of in the recorded order.
4 Press [PLAY P] to start programme
Press [DVD] first.
playback.
1 In stop mode, press [SETUP].
2 Select “CD Playback Mode” using
[U/ D], then press [ENTER].
CD Playback Mode menu will appear.
Hint
• To erase tracks you selected, press [CLEAR].
• You can make up to 50 track settings.
• To cancel programme playback, press [STOP S]
twice during programme playback. “OFF” appears
on the screen.
3 Select “Random Play” using [U/ D],
then press [ENTER].
• You may also select the desired track using
[the Number buttons] at step 3.
Random playback will start.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
programme playback.
Hint
• To cancel random playback, press [STOP S] twice
during random playback. “OFF” appears on the
screen.
Note
• During programme playback, if you forward the track
to the end, the playback speed of the next track will
be normal.
• For Video CDs with PBC function, the PBC setting
will be switched to off automatically when you start
random playback.
• During programme playback, you cannot use the
search function except for the search with
[SKIP B / F].
Note
• During random playback, if you forward the track to
the end, the playback speed of the next track will be
normal.
• During random playback, you cannot use the search
function except for the search with [SKIP B/ F].
By pressing [SKIP B], you can return only to the
beginning of the current track.
Slide Show
JPEG
You can select the display time between 5 seconds
and 10 seconds.
Programme Playback
1 Follow steps 1 and 2 in “Random
Playback”.
CD
VCD
(PBC OFF)
2 Select “Slide Show” using [U / D],
You can programme the disc to play back in your
desired order.
then press [ENTER].
3 Select the display time using
1 Follow steps 1 and 2 in “Random
[U/ D], then press [ENTER].
Playback”.
4 Press [SETUP] to exit.
Note
2 Select “Program Play” using [U/ D],
then press [ENTER].
• Large-size JPEG files take a few moments to be
displayed.
EN
54
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 55 Monday, March 26, 2007 10:14 AM
3 Select a desired audio soundtrack or
audio channel using [U/ D], then
press [ENTER].
Selecting the Format of Audio
and Video
You can select the format of audio and video to suit
the content of the disc you are playing back.
With a DVD Video, VR mode DVD-RW, or DivX®
files:
Audio soundtrack will switch.
Example:
English → Spanish → French
Switching subtitles
VR
If the title contains both main and sub audio, you
can further select “L” (main), “R” (sub), “L/R”
(mixed of main and sub).
®
®
DVD-V
DVD-RW
DivX
Many DVD-Videos have subtitles in one or more
languages. The available languages are usually
printed on the disc case. You can switch subtitle
languages at any time during playback.
With an Audio CD or Video CD:
The Audio channel will switch.
Example:
L/R → L → R
1 During playback, press [DISPLAY].
Note
• For some discs, it is only possible to change the
soundtrack from the disc menu. Press [TOP MENU]
or [DISC MENU] to display the disc menu.
2 Select the
icon using [L/ P], then
press [ENTER] within 1 second, or
wait for 1 second to display the
selection menu.
Switching Virtual Surround System
3 Select the desired subtitle language
Video
DVD-RW
VR
DVD-RW
using [U / D], then press [ENTER].
DVD-V
DVD-R
Subtitles are displayed in the selected language.
If you select “OFF”, subtitles will disappear.
DVD+RW
DVD+R
CD
MP3
You can enjoy stereophonic virtual space through
your existing 2 channel stereo system.
For audio CD or MP3, skip to step 2.
Note
• With some discs it is only possible to change the
subtitle language from the disc menu. Press
[TOP MENU] or [DISC MENU] to display the disc
menu.
1 During playback, press [DISPLAY].
Display menu will appear.
• If a 4-digit language code appears in the subtitle
menu at step 3, refer to the “Language Code” on
page 79.
• For discs with DivX® files, the screen only displays
the number of subtitle languages.
2 Select the
icon using [L/ P], then
press [ENTER] within 1 second, or
wait for 1 second to display the
selection menu.
Virtual Surround menu will appear.
Switching Audio Soundtrack
VR
e.g.) DVD-Video
®
®
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
DVD-V
DVD-RW
CD
VCD
DivX
When playing back a DVD-Videos recorded with two
or more soundtracks (often in different languages),
you can switch among them during playback.
When playing back DVD-RW discs recorded in VR
mode, you can switch to main audio (L), sub audio (R)
or a combination of both (L / R).
3 Select “OFF”, “Type 1” or “Type 2”
using [U/ D], then press [ENTER].
When playing back Audio CDs or Video CDs, you can
switch among the left, the right channel and stereo.
e.g.) DVD-Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
For audio CD, skip to step 2 or press [AUDIO
and skip to step 3.
]
OFF
Type 1
Type 2
1 During playback, press [DISPLAY].
Or press [AUDIO
] during playback and follow
• OFF: No effect
• Type 1: Natural effect
• Type 2: Emphasised effect
from step 3.
2 Select the
icon using [L/ P], then
press [ENTER] within 1 second, or
wait for 1 second to display the
selection menu.
EN
55
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 56 Monday, March 26, 2007 10:14 AM
Note
• Select Virtual Surround to “OFF” in a case the sound
is distorted.
• The setting will be kept “OFF” when the unit is
turned off.
Switching Camera Angles
DVD-V
Some DVD-Videos feature scenes shot from two or
more angles. The disc case is usually marked with an
angle icon if the disc has multi-angle scenes.
1 During playback, press [DISPLAY].
The angle icon appears when a switching camera
angle is available. (Available only when the angle
icon appears in bottom right on the TV screen.)
2 Select the
icon using [L / P],
then press [ENTER].
The angle will switch each time you press
[ENTER].
Hint
• If the Angle Icon setting is “OFF” in the Setup menu,
the icon will appear only when the disc is played
back and the Display menu appears. (See page 68.)
• Even when the icon is not displayed, you can
select the angle if the currently played back title has
at least two multi-angle scenes.
Reducing Block Noise
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
®
®
DVD+RW
DVD+R
VCD
DivX
1 During playback, press [DISPLAY].
icon using [L/ P],
2 Select the
then press [ENTER] within 1 second,
or wait for 1 second to display the
selection menu.
Noise Reduction menu will appear.
3 Select the desired option using
[U/ D], then press [ENTER].
This function reduces noise in the playback picture.
When playing back discs recorded in long time modes
such as EP or SLP, select “Type 1” or “Type 2”.
“Type 2” is more effective.
When playing back discs with a little noise, such as
DVD-Videos, select “OFF”.
EN
56
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 57 Monday, March 26, 2007 10:14 AM
Editing
8
9
Title name (editable): If you do not name the title,
the recorded date, time, channel, and the
recording mode are displayed here.
Progress bar: Indicating the progress of the
playback.
Disc Editing
You can edit a disc recorded using the PAL system. It
is not possible to edit discs recorded using the NTSC
system.
10 Preview window: Preview of the selected title is
displayed here.
11 Playback status: Indicating the current playback
status of the selected title.
Guide to a Title List
Press [RETURN] to exit the title list.
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from
this list and easily edit the titles as you prefer.
Press [TOP MENU].
Editing Discs
4
5
6
You will find editing discs is easy. This unit offers
convenient edit functions which are possible only with
DVD-RW/-R and DVD+RW/+R discs.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
• Combining titles
• Adding titles to a Playlist
Title List
ORG
01/ 01/ 07 12:00 P01 LP
12:00 (2:00:00)
01/ 01/ 07
P01 LP
1
2
5
3
6
4
• Erasing all Playlist
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
1 / 2
(Possible editing functions depend on the recording
format and editing method.)
3
2
1
3
Original and Playlist (VR mode)
Edit
For VR mode DVD-RW disc, you can edit the
recordings in Playlist without changing the original
recordings. Playlist does not take up much disc space.
What “Original” or “Playlist” is for?
Throughout this manual, you will find Original and
Playlist which refer to the actual content and the
edited version.
ORG
Scene Delete
Edit Title Name
Chapter Mark
Protect
1
• Original content refers to what’s actually recorded
on the VR mode DVD-RW disc.
01/ 01/ 07 12:00 P01 LP
• Playlist content refers to the edited version of the
VR mode DVD-RW disc; how the Original content is
to be played.
0:00:59
11 10
9
8
7
Finalising a Disc
1
2
Title list: List of the titles recorded on the disc
and their information.
For DVD+RW/+R, empty title always appears at
the last of the title list.
The protect icon, which appears when the title
has been protected. (Original titles only)
Arrow: Indicating there is a previous / next page.
Title list icon, which indicates a type of the
displayed title list.
• This will allow a disc that is recorded on this unit to
be played back on a different DVD player — without
finalisation it will not be playable on another player.
• After finalising a DVD-RW/-R or DVD+R disc, you
cannot edit any information that is on that disc.
• If you have recorded in DVD+RW disc, then editing
is still permitted after finalising.
3
4
Using these editing functions to modify
copyrighted content for any purpose other than
your private viewing may be prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and
criminal liability.
: VR (original) mode
ORG
: VR (Playlist) mode
PL
: +VR mode
+VR
: Video mode
Video
5
6
Title name.
Title information, which displays recorded time,
length of the title, date / month / year, recorded
CH, and the recording mode.
Submenu: Submenus for the selected menu are
displayed here.
Note
• A Playlist is not available for DVD-R or Video mode
DVD-RW and DVD+RW/+R discs.
• It is not possible to edit a disc recorded in another
video system other than PAL, such as NTSC.
7
EN
57
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 58 Monday, March 26, 2007 10:14 AM
4 Select “Yes” using [U/ D], then
Deleting Titles
Video
press [ENTER].
VR
Title List
DVD-RW
DVD-RW DVD-R
DVD+RW
ORG
01/01/07 12:00
12:00 (2:00:00)
P01 LP
01/01/07
P01 LP
DVD+R
1
2
3
6
You can delete titles you do not want to keep.
When an Original is deleted from VR mode DVD-RW
disc, the recordable disc space will increase. Even
when a Playlist is deleted, the original of the Playlist
will remains, and recordable disc space will not
increase.
Delete this title?
Yes
4
No
Add To Playlist
1 / 2
Recordable disc space of Video mode DVD-RW and
DVD+RW disc will increase when the last title on the
title list is deleted. However, deleting the title will not
change recordable disc space for DVD-R and DVD+R
disc.
“Are you sure?” will appear. Select “Yes” using
[U/ D], and then press [ENTER].
Title is deleted.
In finalised DVD-R, Video mode DVD-RW or DVD+R
discs, you cannot select the title list because it cannot
be edited once finalised.
5 Press [RETURN] or [STOP S] to exit.
Writing on the disc starts.
It may take awhile to write the data on a disc.
Note
Note
• It is not possible to retrieve deleted titles.
• If you delete the title in DVD+RW disc, deleted title
will be displayed as “Empty”.
Press [DVD] first.
• You cannot overwrite on the “Empty”.
1 In stop mode, press [TOP MENU].
Title list will appear.
For DVD-RW, press [DISC MENU] to switch
between “Original” and “Playlist” if the disc is
recorded in VR mode.
Editing Title Name
Video
DVD-RW
VR
DVD-RW DVD-R
DVD+RW
2 Press [ENTER] at the desired title
with [U/ D / L/ P].
DVD+R
You can edit the title names from this menu.
The title names you edit will appear on the title list.
e.g.) VR mode DVD-RW disc
Press [DVD] first.
Title List
ORG
01/01/07 12:00
12:00 (2:00:00)
P01 LP
01/01/07
1 In stop mode, press [TOP MENU].
P01 LP
Title list will appear.
1
2
5
3
6
For DVD-RW, press [DISC MENU] to switch
between “Original” and “Playlist” if the disc is
recorded in VR mode.
4
2 Press [ENTER] at the desired title
with [U/ D/ L / P].
e.g.) VR mode DVD-RW disc
1 / 2
Pop up window will appear.
Title List
ORG
01/01/07 12:00
12:00 (2:00:00)
P01 LP
01/01/07
3 Select “Title Delete” using [U/ D],
P01 LP
then press [ENTER].
1
2
5
3
6
Title List
ORG
01/01/07 12:00
12:00 (2:00:00)
P01 LP
01/01/07
4
P
01 LP
1
2
3
6
Play From Start
Edit
1 / 2
Title Delete
4
Pop up window will appear.
Add To Playlist
3 Select “Edit” with [U/ D], then
press [ENTER].
1 / 2
Edit menu will appear.
4 Select “Edit Title Name” using
[U/ D], then press [ENTER].
A window for entering the title name will appear.
EN
58
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 59 Monday, March 26, 2007 10:14 AM
5 To enter the title name, refer to
“Guide to Editing Title Names” on
this page.
Setting or Clearing Chapter Markers
VR
DVD-RW
Original
VR
DVD-RW
Playlist
DVD+RW
DVD+R
Edit - Edit Title Name
ORG
You can add chapter markers to a title. After a title is
marked with chapters, you can use the chapter
search feature.
You can set a chapter marker anywhere you want.
You cannot set more than 999 chapter markers in the
Playlist.
1
A
a
B
b
2
!
C
c
1
@
3
?
Press [DVD] first.
01/01/07 12:00 P01 LP
1 Follow the steps 1 to 3 in “Editing
0 : 00 : 59
Title Name” on page 58.
When you finish entering the title name, press
[ENTER].
2 Select “Chapter Mark” using [U/ D],
then press [ENTER].
6 Select “Yes” using [U / D], then
press [ENTER].
3 Use [SKIP B/ F], [REV r],
[FWD f], [PLAY P] and [PAUSE p]
to find the point where you will
create a new chapter marker.
Or, use [SKIP B/ F] to find a
chapter marker that you wish to
delete.
The name you edited becomes the title.
7 Press [RETURN] and then [RETURN]
or [STOP S] to exit.
Writing on the disc starts.
It may take awhile to write the data on a disc.
4 Select “Add” or “Delete” accordingly
using [U/ D], then press [ENTER].
e.g.) VR mode DVD-RW disc Original
Guide to Editing Title Names
Step 1: Select the desired character set using
[U/ D], then press [ENTER].
Step 2: Using the list below as a guide, press
[the Number buttons] repeatedly until the
desired letter appears.
Edit - Chapter Mark
ORG
Add
1
Delete
Select
ABC
abc
123
@ ! ?
Press
Chapter
2 / 3
<space> <space>
<space>
0
! ” # $ % & ’ ( )
01/01/07 12:00
P01 LP
–
–
1
+ , - . / : ; < = >
∗
1 : 25 : 47
? @ [ ] ^ _ { | }
You cannot delete the first chapter of a title.
–
–
–
–
–
–
–
–
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
5 Select “Yes” using [U/ D], then
press [ENTER].
GHI
ghi
e.g.) VR mode DVD-RW disc Original
JKL
jkl
Edit - Chapter Mark - Add
ORG
MNO
PQRS
TUV
mno
pqrs
tuv
Yes
1
No
WXYZ
wxyz
Chapter
2 / 3
• Characters set will be changed to the “@!?”
automatically if you press [1] after you selected the
“ABC” or “abc” mode.
01/01/07 12:00
P01 LP
Note
1 : 25 : 47
• To delete letters, press [CLEAR] repeatedly. Press
and hold [CLEAR] to delete all letters.
A chapter marker is added.
• Press [L/ P] to move the cursor to the left or right.
• You can enter up to 30 letters.
• Unrecognisable characters will be replaced with
asterisks (*). If you delete them, adjoining
characters may change to asterisks (*) or other.
Adding a chapter marker:
If you select “Add” at step 4, a new chapter marker is
created at the point you specified.
Deleting a chapter marker:
If you select “Delete” at step 4, the chapter marker
you selected is deleted.
EN
59
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 60 Monday, March 26, 2007 10:14 AM
6 Press [RETURN].
5 Press [RETURN] and then [RETURN]
or [STOP S] to exit.
7 Press [RETURN] again and then
Writing on the disc starts.
It may take awhile to write the data on a disc.
[RETURN] or [STOP S] to exit.
Writing on the disc starts.
It may take awhile to write the data on a disc.
Note
• You cannot select the chapter mark of the title which
is less than 5 minutes.
• You cannot select a chapter marker interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter marker may be delayed depending on the
recording content.
Note
• Maximum numbers of chapter for each DVD:
VR mode DVD : 999 chapters per entire original
and playlist
+VR mode DVD : 254 chapters per disc, 99
chapters per title
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Maximum number of chapter for Video mode DVD is
99 chapters per disc and title.
Setting or Clearing Chapter Markers
for Video Mode DVD-RW Disc
Video
Hiding Chapters
DVD+RW
DVD+R
DVD-RW
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
For titles in Video mode DVD-RW disc, you set or edit
chapter at every time interval. You can clear the
chapter mark in once too.
You can specify the interval of chapter marks for titles
last more than 5 minutes.
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing
Press [DVD] first.
Title Name” on page 58.
1 Follow the steps 1 to 3 in “Editing
2 Select “Hide Chapter” using [U/ D],
Title Name” on page 58.
then press [ENTER].
2 Select “Chapter Mark” using [U/ D],
3 Use [SKIP B/ F], [PLAY P] and
[PAUSE p] to decide the chapter to
be hidden.
then press [ENTER].
Edit
Video
4 Select “Hidden” using [U/ D], then
Edit Title Name
1
press [ENTER].
Chapter Mark
Edit - Hide Chapter
+VR
Visible
1
Hidden
04/01/07 12:00
P01 LP
Chapter 2 / 3 Visible
1 : 10 : 25
3 Select the desired interval using
02/01/07 12:00
P01 LP
[U/ D], then press [ENTER].
1 : 25 : 47
Edit - Chapter Mark
Video
5 Press [RETURN].
OFF
1
6 Press [RETURN] again and then
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
[RETURN] or [STOP S] to exit.
Writing on the disc starts.
It may take awhile to write the data on a disc.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[U/ D] to select “Visible” at the step 4 above.
Data will be written onto the disc momentarily.
04/01/07 12:00
P01 LP
1 : 10 : 25
Note
4 Select “Yes” using [U / D], then
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
press [ENTER].
Chapter markers are added.
If you select “OFF” at step 3, all the chapter
markers are erased.
EN
60
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 61 Monday, March 26, 2007 10:14 AM
3 Select “Title Dividing” using [U/ D],
Protecting Titles
then press [ENTER].
VR
DVD-RW
Original
4 Select “Yes” using [U/ D], then
press [ENTER].
To prevent the accidental editing or erasing of the
titles, you can protect them in the Original menu.
e.g.) VR mode DVD-RW disc playlist
Edit - Title Dividing
PL
Press [DVD] first.
Yes
1
1 Follow the steps 1 to 3 in “Editing
No
Title Name” on page 58.
2 Select “Protect” using [U/ D], then
press [ENTER].
Edit
ORG
01/01/07 12:00
P01 LP
1 : 25 : 47
Scene Delete
1
Edit Title Name
Chapter Mark
Protect
The title is divided into two new titles with the
same title names.
For DVD+RW
: Writing on the disc starts.
It may take awhile to
write the data on a disc.
For VR mode DVD-RW: Proceed to step 5.
01/01/07 12:00
P01 LP
5 Press [RETURN] or [STOP S] to exit.
1 : 25 : 47
Writing on the disc starts.
It may take awhile to write the data on a disc.
3 Press [ENTER] again.
Note
Edit - Protect
ORG
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
99 (-RW) or 49 (+RW), and the number of recording
chapters reaches the maximum of 999 (-RW) or 254
(+RW).
OFF
ON
1
Combining Titles
01/01/07 12:00
P01 LP
VR
DVD-RW
Playlist
1 : 25 : 47
You can combine two titles into a single title.
4 Press [RETURN] and then [RETURN]
Press [DVD] first.
or [STOP S] to exit.
Writing on the disc starts.
It may take awhile to write the data on a disc.
1 Follow steps 1 to 3 in “Editing Title
Name” on page 58.
To protect a whole disc
(VR mode DVD-RW and DVD +RW/+R discs only):
Select “Disc Protect OFF
2 Select “Title Combining” using
[U/ D], then press [ENTER].
ON” from the Disc
Menu, then select “Yes”. Refer to “Setting a Disc
to Protect” on page 40.
3 Select another title to combine using
[U/ D / L/ P], then press [ENTER].
Hint
4 Select “Yes” using [U/ D], then
• The protected title is marked with a protect icon in
the Original list.
press [ENTER].
The two titles will combine into a single title.
Edit - Title Combining
Title List
PL
PL
03/01/07 12:00
12:00(0:30:00)
P01 LP
03/01/07
01/01/07 12:00
12:00 (2:30:00)
P01 LP
01/01/07
Dividing a Title
VR
P01 LP
P01 LP
1
2
3
6
1
4
2
5
3
6
1 + 2
Combine selected titles?
DVD+RW
DVD-RW
Playlist
Yes
No
1 / 6
1 / 6
You can divide a title into two new titles.
Press [DVD] first.
5 Press [RETURN] or [STOP S] to exit.
1 Follow steps 1 to 3 in “Editing Title
Writing on the disc starts.
It may take awhile to write the data on a disc.
Name” on page 58.
Note
2 Use [SKIP B/ F], [REV r],
[FWD f], [PLAY P] and [PAUSE p]
to find the point where you wish to
divide the title.
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.
EN
61
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 62 Monday, March 26, 2007 10:14 AM
Adding Titles to a Playlist
Deleting All Playlists
VR
VR
DVD-RW
Original
DVD-RW
All Playlists can be deleted if it is no longer needed.
For VR mode DVD-RW disc, you can add a title to the
Playlist as you wish.
Press [DVD] first.
You can add up to 99 titles to a Playlist (as long as the
total number of the Playlist does not exceed 999
chapters).
1 Press [SETUP].
Main menu will appear.
2 Select “DVD Menu” using
Press [DVD] first.
[U/ D], then press [ENTER].
1 Follow the steps 1 to 2 in “Deleting
Titles” on page 58.
3 Select “Delete All Playlists” using
[U/ D], then press [ENTER].
2 Select “Add To Playlist” using
DVD Menu
[U/ D], then press [ENTER].
Format
Finalise
Title List
ORG
Disc Protect OFF
Delete All Playlists
ON
01/01/07 12:00
12:00 (2:00:00)
P01 LP
01/01/07
P01 LP
1
2
3
6
Play From Start
Edit
Title Delete
4
Add To Playlist
1 / 2
4 Select “Yes” using [U/ D], then
press [ENTER].
3 Select “Yes” using [U / D], then
press [ENTER].
DVD Menu
Format
Finalise
The title is added to Playlist.
Disc Protect OFF
Delete All Playl
Delete entire playlist?
4 Press [RETURN] or [STOP S] to exit.
Yes
No
Writing on the disc starts.
It may take awhile to write the data on a disc.
Hint
• To delete a title from the Playlist, refer to “Deleting
Titles” on page 58.
• When the disc contains 99 titles or more, or 999
chapters or more, “Add To Playlist” cannot be
selected.
“Are you sure?” will appear.
Select “Yes” using [U/ D], and then press
[ENTER].
DVD Menu
Format
Finalise
Disc Protect OFF
Delete All Playl
Are you sure?
Yes
No
Playlist is deleted.
Writing on the disc starts.
It may take awhile to write the data on a disc.
Note
• Deleting a Playlist will not increase the available
recording time on the disc.
EN
62
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 63 Monday, March 26, 2007 10:14 AM
4 Select “Delete” using [U/ D], then
Deleting Parts of Titles
VR
press [ENTER].
Edit - Scene Delete
PL
DVD-RW
You can delete a specific part of a title.
Even when a title is deleted from the Playlist, the
original title will remain as it is.
The available recording time on the disc will not
increase.
Start
1
End
Preview
Delete
Press [DVD] first.
1 Follow the steps 1 to 3 in “Editing
01/01/07 12:00
P01 LP
Title Name” on page 58.
1 : 40 : 00
2 Select “Scene Delete” using [U/ D],
5 Select “Yes” using [U/ D], then
then press [ENTER].
press [ENTER].
e.g.) VR mode DVD-RW disc Playlist
“Are you sure?” will appear. Select “Yes” using
[U/ D], and then press [ENTER].
Edit
PL
Scene Delete
1
Edit - Scene Delete
PL
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
Are you sure?
1
Yes
No
01/01/07 12:00
P01 LP
1 : 25 : 47
01/01/07 12:00
P01 LP
1 : 40 : 03
3 Use [SKIP B/ F], [REV r],
[FWD f], [PLAY P] and [PAUSE p]
to find the start point, then press
[ENTER].
The part of the title is deleted.
6 Press [RETURN] and then [RETURN]
or [STOP S] to exit.
Writing on the disc starts.
Edit - Scene Delete
PL
It may take awhile to write the data on a disc.
Start
1
Note
End
Preview
Delete
• You cannot select “Scene Delete” if the number of
chapter markers in the Original or Playlist is more
than 900. (Depends on the content, there is a case
that you cannot select “Scene Delete” before the
number of chapter marks reaches 900.)
• The recordable disc space will not increase after
deleting parts of titles.
01/01/07 12:00
P01 LP
1 : 00 : 00
• When a scene is deleted from an original, the scene
on the playlist will also be deleted.
Then use [SKIP B/ F], [REV r],
[FWD f], [PLAY P] and [PAUSE p]
again to move to the end point, and
press [ENTER].
Edit - Scene Delete
PL
Start
1
End
Preview
Delete
01/01/07 12:00
P01 LP
1 : 15 : 00
The cursor will move to “Preview”.
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the area
selected for deletion is indicated in red.
You can check the preview by pressing [ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.
EN
63
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 64 Monday, March 26, 2007 10:14 AM
Function Setup
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Playback
Items (highlight is the default)
Contents
Parental Lock
page 66
Set the parental level for DVD disc playback.
All
level 1 to 8
Audio Out
Dynamic Range
Compressing the range of sound volume.
ON
page 66 Control
OFF
PCM
Set whether the sound recorded in 96kHz will
be down sampled in 48kHz.
48kHz
96kHz
Dolby Digital
MPEG
DTS
PCM
Stream
Set the type of sound signal which outputs from
the digital audio output jack.
Set the digital audio output signal specification.
Set whether DTS signal is output or not.
Set the language for Disc Menu.
PCM
Stream
ON
OFF
Disc Menu Language
page 67
English
Other
Audio Language
page 67
Set the language for audio.
Original
English
Other
Subtitle Language
page 68
Set the language for subtitles.
OFF
English
Other
Angle Icon
page 68
Set whether or not to display the angle icon.
Set the type of still image in pausing playback.
ON
OFF
Still Mode
page 68
Auto
Field
Frame
TV System
page 68
Set the TV system.
PAL
Auto
Display
Screen Saver
page 69
OFF
Set the idling time before the screen saver
starts.
5 minutes
10 minutes
15 minutes
30 minutes
FL Dimmer
page 69
Auto
Bright
Dark
Set the brightness of the Front Panel Display.
Video
TV Aspect
page 69
Set a picture size according to aspect ratio of
your TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Select Video
page 38
Set the video input type for the external input.
Sets the video output mode.
Video In
S-Video In
Video Out
page 69
SCART (RGB)
Component
Progressive (P)
Component
Interlace (I)
EN
64
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 65 Monday, March 26, 2007 10:14 AM
Setup
Recording
Items (highlight is the default)
Contents
Auto Chapter
page 28
OFF
Insert chapter marks at even time interval.
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Recording Audio Select (XP)
page 30
PCM
Dolby Digital
Set the recording audio type. (Only when the
Rec Mode is set to XP.)
Auto Finalise
page 41
ON
OFF
Set the unit to finalise the disc automatically.
Aspect Ratio(Video mode)
page 28
Set a aspect ratio for Video mode recording.
Auto
4:3
16:9
→
Dubbing Mode
page 39
Set the dubbing selection.
VCR DVD
DVD VCR
→
Make Recording Compatible
page 28
ON
OFF
Set to prohibiting additional recording (OFF) or
to replace the title list after recording (ON).
Bilingual Recording Audio
page 30
Set the audio type for recording.
Set the external input audio type for recording.
Set the clock.
Main
Sub
External Input Audio
page 30
Stereo
Bilingual
Clock
Clock Setting
page 25
Auto Clock Setting
page 24
Set the clock automatically.
ON
OFF
Channel
Auto Tuning
page 22
Tune the channels automatically.
Tune the channels manually.
Manual Tuning
page 23
Move
Move the channel to different position.
Provide DivX®VOD registration code.
Set the language for DivX® Subtitle.
page 24
DivX
DivX®VOD
page 45
DivX Subtitle
page 70
OFF
English
French
Spanish
German
Italian
Swedish
Dutch
Russian1
Russian2
Hungarian
Polish
Czech
Hebrew
Reset All
Set to the default setting.
page 71
Note
• Your change to each settings stays on even when the power is switched off.
• An item which is not currently available is grayed in the settings.
EN
65
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 66 Monday, March 26, 2007 10:14 AM
Note
• The parental lock function may not be available on
some discs.
Playback
• It may be difficult to determine if some DVDs
support the parental lock function. Be sure to
confirm that the parental lock function operates in
the way that you have set.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
• Record the password in case you forget it.
2 Select “Playback” using [U/ D],
then press [ENTER].
A password is not yet set
General Setting
Select “Yes” using [U/ D], then
press [ENTER]. Enter a new
password using [the Number
buttons], then press [ENTER].
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
Change Password?
Password Input
Yes
No
Yes
Your setting is activated.
If you select “No”, press [SETUP] to exit.
3 Select a desired item using [U/ D],
then press [ENTER].
A password is already set
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
1
2
3
4
5
6
7
8
Enter the current password using
[the Number buttons].
Password Input
If you want to change the password, select “Yes”
using [U/ D], then press [ENTER].
Still Mode
TV System
Change Password?
Yes
No
4 Refer to 1. to 8. on pages 66 to 68
and set the selected item.
Enter a new password using
[the Number buttons], then press
[ENTER].
5 When you finish with the setting,
press [SETUP] to exit.
Password Input
1. Parental Lock (Default: All)
Set the Parental Lock level.
Your setting is activated.
Change the Parental Lock level using
[U/ D], then press [ENTER].
Proceed with either of the following steps.
Parental Lock
Note
• Press [CLEAR] to erase numbers entered
incorrectly.
• If you forget your password or you want to clear all
settings in Parental Lock, enter [4], [7], [3], [7] using
[the Number buttons] at the option window. Your
password is cleared and parental levels are set to
“All”.
All
8
7
6
5
4
3
2
1
2. Audio Out
Parental level
Choose the appropriate audio setting for your
external device.
It will only affect a disc playback.
All: All parental locks are cancelled.
8: DVD software of any grade (adult /
general / children) can be played back.
7 to 2: Only DVD software intended for general
use and children can be played back.
1: Only DVD softwares intended for children
can be played back.
Select a desired item using [U / D],
then press [ENTER].
Audio Out
Dynamic Range Control
PCM
Dolby Digital
MPEG
DTS
EN
66
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 67 Monday, March 26, 2007 10:14 AM
Dynamic Range Control (Default: ON)
Settings for MPEG (Default: PCM)
Select a setting using [U/ D], then
Set to “ON” to make the dynamic range narrower.
press [ENTER].
Select a setting using [U/ D], then
press [ENTER].
MPEG
PCM
Stream
Dynamic Range Control
ON
OFF
Your setting is activated.
PCM: Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to “PCM”.
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to “Stream”.
Your setting is activated.
The Dynamic Range Control function is effective
only with analogue audio connection.
Note
• The Dynamic Range Control function is available
only on discs recorded in the Dolby Digital format.
Settings for DTS (Default: ON)
Select a setting using [U/ D], then
PCM sampling (Default: 48kHz)
press [ENTER].
Select a setting using [U/ D], then
DTS
press [ENTER].
ON
OFF
PCM
Your setting is activated.
48kHz
96kHz
ON: Outputs DTS signals.
Your setting is activated.
If your amplifier / decoder is compatible with
DTS, set to “ON”.
OFF: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to “OFF”.
48kHz: If your amplifier / decoder is NOT compatible
with 96 kHz PCM, select “48kHz”. Sound
recorded at 96 kHz is down sampled to
48 kHz.
96kHz: If your amplifier / decoder is compatible with
96 kHz PCM, select “96kHz”. Sound is
sampled at 96 kHz.
3. Disc Menu Language (Default: English)
Set the Disc Menu language.
Note
Select a language using [U / D],
then press [ENTER].
Disc Menu Language
When playing back a disc with copyright protection:
• Even if you select “96kHz”, the sound is down
sampled to 48 kHz.
English
Other
Dolby Digital conversion (Default: Stream)
Your setting is activated.
Select a setting using [U/ D], then
press [ENTER].
4. Audio Language (Default: Original)
Dolby Digital
Set the Audio language.
PCM
Stream
Select a language using [U / D],
Your setting is activated.
then press [ENTER].
PCM: Converts the Dolby Digital into PCM
(2 channel).
Audio Language
Original
English
Other
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to “PCM”.
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to “Stream”.
Your setting is activated.
If “Original” is selected, the audio language is the
default of the inserted disc.
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
EN
67
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 68 Monday, March 26, 2007 10:14 AM
Auto:
Field:
Automatically select the best resolution
setting (“Frame” or “Field”) based on the
data characteristics of the pictures.
Select “Field” when the pictures are still
unstable even if “Auto” is selected. “Field”
stabilises the pictures, although the picture
quality may become coarse due to the
limited amount of data.
5. Subtitle Language (Default: OFF)
Set the Subtitle language.
Select a language using [U/ D],
then press [ENTER].
Subtitle Language
OFF
English
Other
Frame: Select “Frame” to display relatively
motionless pictures in higher resolution.
“Frame” improves the picture quality,
Your setting is activated.
although it may unstabilise the pictures due
to simultaneous output of two Field data.
If “Other” is selected, enter the
appropriate 4-digit code using
[the Number buttons].
Refer to “Language Code” on page 79.
Code Input
Note
• An individual picture on TV screen is called as
Frame, which consists of two separate images
called as Field. Some pictures may be blurred at the
“Auto” setting in still mode due to their data
characteristics.
-
-
-
-
When you finish entering the code,
press [ENTER].
8. TV System (Default: PAL)
Hint
Select a setting using [U/ D], then
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] or [L] to erase numbers entered
incorrectly.
press [ENTER].
TV System
PAL
Auto
Your setting will be activated.
Note
• You can only select the languages supported by the
inserted disc.
• The Audio Language setting may not be available
for some discs.
PAL: Outputs a modified PAL signal for viewing
discs recorded with the NTSC system on a
PAL system TV.
Auto: Changes the video system (PAL / NTSC)
automatically according to the format of
the inserted disc.
6. Angle Icon (Default: ON)
Set the angle icon.
Note
Select a setting using [U/ D], then
press [ENTER].
• With discs recorded using the PAL system, a PAL
signal is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be
viewed on an NTSC system TV.
Angle Icon
ON
OFF
• With discs recorded using the NTSC system, an
NTSC signal is output for viewing on an NTSC or
Multi system TV.
Your setting is activated.
7. Still Mode (Default : Auto)
• With discs recorded using the NTSC system, select
PAL to view on a PAL system TV.
Select a setting using [U/ D], then
press [ENTER].
Still Mode
Auto
Field
Frame
Your setting is activated.
EN
68
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 69 Monday, March 26, 2007 10:14 AM
Display
Video
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
2 Select “Display” using [U/ D], then
2 Select “Video” using [U / D], then
press [ENTER].
press [ENTER].
General Setting
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
3 Select the desired item using
3 Select the desired item using
[U/ D], then press [ENTER].
[U/ D], then press [ENTER].
Screen Saver
FL Dimmer
1
2
TV Aspect
Select Video
Video Out
1
2
3
4 Refer to 1. and 2. on this page and
set the selected item.
4 Refer to 1. and 3. on this page and
set the selected item.
5 When you finish with the setting,
For 2., refer to page 38.
press [SETUP] to exit.
5 When you finish with the setting,
1. Screen Saver (Default: 10 minutes)
press [SETUP] to exit.
Set the screen saver time delay.
Select a setting using [U/ D], then
press [ENTER].
1. TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the
formats of what you are playing back with the unit and
your TV screen (4:3 standard or 16:9 widescreen TV).
Screen Saver
OFF
5
minutes
10 minutes
15 minutes
30 minutes
Select the desired setting using
[U/ D], then press [ENTER].
TV Aspect
Your setting is activated.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
2. FL Dimmer (Default: Bright)
Set the front panel display brightness.
Select a setting using [U/ D], then
If you have a standard TV:
press [ENTER].
Select “4:3 Letter Box”, so that black bars appear on
the top and bottom of the TV screen when playing
back a wide-screen picture. Select “4:3 Pan & Scan”
for a full height picture with both sides trimmed when
playing back wide-screen picture.
FL Dimmer
Auto
Bright
Dark
You can choose one from “Auto”, “Bright” or
“Dark”.
If “Auto” is selected, the display gets dark when
the power is off.
If you have a widescreen TV:
Select “16:9 Wide”.
3. Video Out (Default: SCART(RGB))
This unit is compatible with the Progressive Scan
System. The feature provides you with the higher
definition images than the traditional output system
does. To utilise this feature, you must set Video
Output mode in the Setup menu by following the steps
on the right. “SCART (RGB)” is selected as the
default.
EN
69
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 70 Monday, March 26, 2007 10:14 AM
1 Select the desired setting using
[U/ D], then press [ENTER].
DivX®
Video Out
SCART (RGB)
Component Progressive (P)
Component Interlace (I)
1 In stop mode, press [SETUP]. Select
“General Setting” using [U/ D],
then press [ENTER].
• If you select “Component Progressive (P)”, proceed
to step 2 below.
• If you select “SCART (RGB)” or “Component
Interlace (I)”, your setting is activated.
• Refer to pages 19 and 20 for more details.
2 Select “DivX” using [U/ D], then
press [ENTER].
General Setting
2 Using [L/ P] to select “Yes”. Press
Playback
Display
Video
[ENTER].
Recording
Clock
Channel
DivX
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
Reset All
NOTE:
If there is no picture or picture is
distorted after selecting “Yes”,
wait about 15 seconds for autorecovery.
Activate?
Yes
No
3 Select the desired item using
Final confirmation window will appear.
[U/ D], then press [ENTER].
DivX® VOD
DivX Subtitle
3 Using [U/ D] to select “Yes”. Press
For DviX® VOD, refer to page 45 for details.
[ENTER] within 15 seconds.
Confirm again to use progressive scan.
If Picture is good, select “Yes”.
DivX Subtitle (Default: OFF)
Yes
No
Select the desired setting using
[U/ D], then press [ENTER].
DivX Subtitle
Your setting is activated.
OFF
Note
English
French
Spanish
German
Italian
• If your TV is compatible with Progressive Scan
(625p/525p), you must use the Component Video
cable (commercially available) to connect this unit to
the TV.
Swedish
• When changing the Video Out setting (“SCART
(RGB)”, “Component Interlace (I)” or “Component
Progressive (P)”), connect to a VIDEO jack or an
S-VIDEO jack on the TV. If the setting is changed,
for example, to “SCART (RGB)” while the
COMPONENT VIDEO OUT jacks are used to
connect to the TV, a distorted video signal may be
output.
4 When you finish with the setting,
press [SETUP] to exit.
EN
70
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 71 Monday, March 26, 2007 10:14 AM
Reset All
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
2 Select “Reset All” using [U/ D],
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
Reset All
3 Select “Yes” using [U / D], then
press [ENTER].
Reset to factory default?
Yes
No
“Are you sure?” will appear. Select “Yes” using
[U/ D], and then press [ENTER].
4 When you finish with the setting,
press [SETUP] to exit.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
- DivX® VOD code
- Timer Programmes
EN
71
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 72 Monday, March 26, 2007 10:14 AM
VCR Functions
Playback
Recording and One-touch Timer
Recording (OTR)
VCR
1 Press [
ON / STANDBY] to turn on
Basic Recording
the unit.
VCR
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons] or [PROG.
remote control.
2 Press [VCR].
/
] on the
3 Insert a pre-recorded tape, then
• There is a tape with a record tab in the unit.
press [PLAY P] to begin playback.
4 During playback, press [PAUSE p].
Tape speed
Recording / Playback Time
E120 E180 E240
Playback will be paused and sound will be muted.
Type of tape E60
5 Press [PLAY P] to resume playback.
SP mode
LP mode
1 hour 2 hours 3 hours 4 hours
2 hours 4 hours 6 hours 8 hours
6 Press [STOP S] to stop playback.
• Refer to page 33 for instructions on timer recording.
7 Press [OPEN / CLOSE O] to eject the
tape.
1 Turn on the unit and insert a
recordable tape.
Note
Make sure that the TV input is set on the unit.
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
2 Press [VCR].
3 Select the recording mode using
[REC MODE].
[PROG.
/
].
• The desired recording mode is selected in SP
(standard play) or LP (long play) mode by
pressing [REC MODE].
4 Select the desired channel to record
using [PROG.
/
] or
[the Number buttons].
5 Press [REC I] to start recording.
To temporarily stop recording or to resume it,
press [PAUSE p].
After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.
6 Press [STOP S] when the recording
is completed.
EN
72
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 73 Monday, March 26, 2007 10:14 AM
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it later,
cover the hole with cellophane tape.
Search
Index Search
VCR
Record tab
1 Press [VCR].
One-touch Timer Recording
2 Press [SEARCH] so that the index
search menu appears.
VCR
This feature allows you to set the recording length
simply by pressing [REC I].
3 Enter the number of recordings you
wish to skip using
[the Number buttons] within 30
seconds.
1 Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
4 Press [FWD f] or [REV r] to start
index search.
2 Press [VCR].
If you want to go in the forward direction, press
[FWD f].
If you want to go in the reverse direction, press
[REV r].
After index search, the VCR will play back the
tape automatically.
3 Select the recording mode using
[REC MODE]. (See page 72.)
4 Select the desired channel to record
using [PROG.
/
] or
[the Number buttons].
Note
5 Press [REC I] repeatedly until the
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
• This function is not available during recording.
• Every time a tape is recorded, an index mark is
written on the tape.
• You can make the index mark up to 20.
One-touch Timer Recording will start.
Time Search
0:30
VCR
Normal Recording
1:00
This feature allows you to go to a specific point on a
tape by entering the exact amount of time you wish to
skip in order to reach the point.
8:00
7:30
1 Press [VCR].
• When the unit reaches the specified time, it will be
turned off automatically.
• To change the recording length during One-touch
Timer Recording, press [REC I] repeatedly until the
desired length appears.
2 Press [SEARCH] repeatedly until the
time search menu appears.
3 Enter your desired time to skip using
[the Number buttons] within 30
seconds.
• To cancel One-touch Timer Recording within the
specified time, press [STOP S].
Hint
4 Press [FWD f] or [REV r] to start
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
time search.
If you want to go in the forward direction, press
[FWD f].
Note
If you want to go in the reverse direction, press
[REV r].
After time search, the unit will play back the tape
automatically.
• If VCR One-touch Timer Recording is completed
during DVD playback or recording, the VCR will be
in stop mode and the DVD keeps the current mode.
• You cannot use the pause function during One-
touch Timer Recording.
Note
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
• This function is not available during recording.
• Press [STOP S] to stop the search.
• If the tape reaches the end during the search, this
unit will cancel it and rewind the tape.
[TIMER SET] to cancel the timer-standby mode in
order to use the unit continuously.
• You can set the time up to 9:59.
EN
73
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 74 Monday, March 26, 2007 10:14 AM
Other Operations
Hi-Fi Stereo Sound System
This unit will record and playback Hi-Fi stereo sound.
In addition, it has a NICAM stereo sound decoder.
This unit will receive stereo and bilingual broadcasts
and it is possible to record in several ways and to play
back the sound.
VCR
Press [VCR] first.
To cue or review picture during playback
(Picture Search):
Press [FWD f] or [REV r] during playback.
Press it again and the unit will search in super high
speed (in the LP mode only).
Selecting the Sound Mode
You can select each mode by pressing [AUDIO
on the remote control. Each mode is indicated on the
TV screen as following.
]
To freeze the picture on TV screen during
playback (Still mode):
Press [PAUSE p]. Each time you press the button,
the picture will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still
mode, stabilise the picture by pressing the
• During playback of the recorded tape in Hi-Fi mode
• During reception of stereo broadcasts
Display on
Mode
Audio output
the TV screen
STEREO
LEFT
[PROG.
/
].
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Stereo
Stereo
L
L audio from both speakers
R audio from both speakers
To reset the tape counter:
Press [CLEAR].
R
RIGHT
To play back in slow forward motion:
During playback, press [PAUSE p], then press
[FWD f].
Normal Monaural
MONO
• During reception of bilingual broadcasts
If the noise bars appear on the TV screen, you can
reduce it by pressing [PROG.
is not available in VCR mode.
/
]. Slow reverse
Display on
the TV screen
Mode
Audio output
To repeat a playback indefinitely without touching
[PLAY P] (Auto Repeat Playback):
During normal playback, press [REPEAT]. When a
tape is played to its end, the tape will rewind to the
beginning and start playback itself. To cancel the Auto
Repeat Playback, press [REPEAT] again.
Main audio from the both
speakers
Main
Sub
Main
Sub
Sub audio from the both
speakers
• Main audio from the left
speaker
• Sub audio from the right
speaker
Note
Main /
Sub
Main
Sub
• Still / Slow / Pause mode will be automatically
cancelled after 5 minutes to prevent damage to the
tape and the video head.
• To return to normal play back from the Picture
Search / Still / Slow mode, press [PLAY P].
Note
• If you play back non-Hi-Fi tapes, the unit will play
back automatically in monaural even if you select
any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
EN
74
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 75 Monday, March 26, 2007 10:14 AM
Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment by you may eliminate the problem and restore correct
operation.
DVD • VCR
Symptom
Remedy
The power does not turn on.
• Check the mains cable is connected securely.
• Check the breaker (in case of power failure).
There is no picture.
• Check signal cables are connected securely.
• Check if a connecting cable is damaged.
• Check connections to your TV. (See page 19.)
• Switch the input selector on your TV (to “AV1”, for example) until a picture
appears on the screen.
TV programme picture does not fill the
screen.
• Set channels with “Auto Tuning” from the screen menu. (See page 22.)
• Select the channel of a TV programme(s) using [PROG.
/
].
TV programme pictures are distorted.
• Adjust the direction of the TV antenna.
• Adjust the picture. (See the TV instruction manual.)
• Place the antenna and the TV farther apart.
• Separate any bunched antenna cables and the TV.
TV channel cannot be changed.
• Switch the TV input.
• Check if the antenna cable is connected correctly. (See page 19.)
The channel cannot be changed from the
channel you are recording.
• Set the TV input to “TV”.
Playback picture is distorted.
• Do not bring equipment that may cause electrical interference, such as a
cellular phone, near the unit.
The playback picture or TV programme from
equipment connected through the unit is
distorted.
• If a DVD player, VCR or tuner is connected to your TV via the unit, the copy-
protection signal applied to some programme(s) could affect picture quality.
Disconnect the playback equipment in question and connect it directly to your
TV.
Nothing was recorded even though you set
the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for more
than 30 seconds.
• Reset the clock. (See page 24.)
• Unplug the mains cable from the AC outlet and plug it in again.
• The programme contains copy protection signals that restrict copying.
• The timer setting overlapped with another setting that was set later or has
priority.
Timer recording is not completed or did not
start from the beginning.
• The timer setting overlapped with another setting that has priority. (See pages
35-36.)
• There was not enough disc or tape space.
Timer recording does not start.
There is no sound.
• No disc is inserted.
• A disc is not recordable (finalised DVD-RW/-R, finalised DVD+R, a fully
recorded disc, etc.).
• The disc is dirty or flawed.
• Check if all cables are connected securely.
• Check if a connecting cable is damaged.
• Check the connections to the amplifier input.
• Check if the input source setting on the amplifier is correct.
• Check if the recorder is in Pause mode or in Slow-motion Playback mode.
• Check if the recorder is in Fast Forward or Fast Reverse mode.
Timer recording is not possible.
• Make sure
indicator appears on the front panel display of this unit. If not,
press [TIMER SET].
The remote control does not function.
• Batteries are exhausted.
• There are obstacles between the remote control and the unit.
• The remote control is too far from the unit.
• There are no batteries in the remote control.
• The unit is not turned on.
• The remote control is not pointed at the remote sensor on the unit.
• Press [DVD] or [VCR], whichever you need. Then try again.
The unit does not operate correctly.
• If static electricity or anything else causes the unit to operate abnormally,
unplug the mains cable and plug it in again.
EN
75
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 76 Monday, March 26, 2007 10:14 AM
DVD
Symptom
Remedy
There is no picture.
• If the Setup menu display appears, press [SETUP] or [RETURN] to turn off the
display.
Picture noise appears.
• The disc is dirty or flawed.
• If the unit is connected to your TV via a VCR, or if it is connected to a
combination TV / VIDEO player, the copy-protection signal applied to some
DVD programme could affect picture quality. If you still experience this problem
even when you connect the unit directly to your TV, try connecting the unit to
your TV’s S-VIDEO input.
Sound is noisy.
• The disc is dirty or flawed.
The unit does not play back the disc.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labelled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM). (See page 10.)
• The region codes on the DVD-Video and the unit are not matched. (See page
10.)
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about two hours until the moisture evaporates. (See page 3.)
• Check if the disc has been finalised by the same recording device.
There is no sound.
• If the audio signal is not output from the DIGITAL AUDIO OUT (COAXIAL)
jack, check the Audio setting. (See pages 66-67.)
Playback image freezes for a moment.
• During the playback of a two layered disc, the picture may freeze for a moment
while playback switches from the first to the second layer. This is not a
malfunction.
The unit does not play back the disc from the
beginning.
• Resume playback is activated. (See page 48.) Press [STOP S] twice.
• You have inserted a disc whose Title menu or disc menu automatically appears
on the TV screen when it is first inserted.
The unit starts playing back the disc
automatically.
• The DVD-Video features an auto playback function.
Some functions such as Stop, Search, or
Slow-motion Playback cannot be performed.
• Depending on the disc, you may not be able to perform some of those
operations. See the instruction manual supplied with the disc.
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD-Video, DVD-RW/-R or
DVD+RW/+R disc being played back.
• The DVD-Video prohibits the changing of the language for the sound track.
• Try changing the language using the DVD-Video menu.
The subtitle language cannot be changed or
turned off.
• Multilingual subtitles are not recorded on the DVD-Video.
• The DVD-Video prohibits changing the subtitles.
• Try changing the subtitles using the DVD-Video menu.
Angles cannot be changed.
• You can change the angle only if the disc contains multi-angle scene. Angles
can be changed only when the multi-angle scene appears on the screen.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video menu.
Recording does not start immediately after
pressing [REC I].
• An unused DVD-RW or DVD+RW disc was inserted. It takes awhile for the unit
to automatically format a DVD-RW or DVD+RW.
Recording does not stop immediately after
you press [STOP S].
• It will take a few seconds for the unit to send data to disc before recording can
stop.
The disc tray does not open when you press
[OPEN / CLOSE O].
• It may take a few seconds for the disc tray to open after you have recorded or
edited a disc.
• This is because the unit is sending data to the disc.
“Repairing” appears on the display.
• If a power failure occurs or the mains cable is unplugged during recording,
finalising, formatting or editing (even after “Wait for a moment.” message
disappeared), a repairing process will begin automatically when the unit is
turned on next time. It may take several minutes up to about four hours.
• If you intend to cancel the Repairing process, press [O(OPEN / CLOSE)] on
the front panel, then select “Yes” with [U/ D] and press [ENTER]. After that,
the disc tray will automatically open. In case the Repairing process is
cancelled, the disc MAY NOT work.
Repairing
In a case you intend to cancel the Repairing
process.
Do you want to cancel repair
process? If “YES” is selected,
the disc may not be usable.
Yes
No
Repairing
EN
76
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 77 Monday, March 26, 2007 10:14 AM
VCR
Symptom
Remedy
Picture noise appears.
• Adjust tracking control for better picture by pressing [PROG.
are playing back a video tape.
/
] while you
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING” on page 5.
The unit does not play back the tape.
• No video tape is inserted.
Recording does not start immediately after
pressing [REC I].
• Make sure the video tape has a record tab when you record to a video tape. If
needed, cover the hole with cellophane tape.
The remote control does not function.
• Check if a video tape is in the unit. Press [VCR]. Then try again.
The motor rotates even when playback /
recording is stopped.
• The motor may rotate for the duration of approximately 5 minutes for efficient
operation. This is not a malfunction.
* If the above remedies do not solve the problem, please call an authorised service centre.
EN
77
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 78 Monday, March 26, 2007 10:14 AM
Error message
Cause
Solution
Disc Error
• An unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert a standard disc shown in pages 9-
— Please eject the disc. —
Playback feature may not be
available on this disc.
10.
• Insert the disc with the labelled side facing
up.
Region Error
• Playback is not authorised in the region of
the DVD-Video that you inserted in the
unit.
• Insert a DVD-Video with region codes 2 or
ALL.
— Please eject the disc. —
Playback is not authorized in
your region.
Parental Lock On
The current selected parental
level prohibits playback.
• The current selected parental level in the
Setup menu prohibits playback.
• Check the “Parental Lock” setting. (See
page 66.)
Recording Error
This program is not allowed to
be recorded.
• The recording function encountered a
copy prohibited programme.
• Original source is in NTSC system.
• You cannot record copy prohibited
programmes.
Recording Error
This program is not recordable in
Video mode.
• You are trying to record a copy-once
programme onto a DVD-RW disc in Video
mode.
• Set “Format Mode” to “VR mode”. (See
page 27.)
Recording Error
Cannot record on this disc.
• You are trying to record onto a disc that is
unrecordable, or the disc status does not
satisfy recording requirements.
• The disc is dirty.
• Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 26.)
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is damaged.
Recording Error
This program is not allowed to
be recorded on this disc.
• You are trying to record a copy-once
programme onto a DVD disc that is not
compatible with CPRM.
• Insert a ver. 1.1 or ver. 1.2 DVD-RW disc
(compatible with CPRM.)
Recording Error
This disc is protected and not
recordable.
• You are trying to record onto a disc that is
set as protected in the Setup Menu.
• Remove the disc protect setting in the Disc
menu. (See page 40.)
Recording Error
• You are trying to record onto a disc that
has no space for recording.
• Insert a recordable disc with enough
recording space.
• Delete unnecessary original titles. (See
page 58.)
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto a disc on
which the number of recorded titles has
reached the maximum (99).
• Delete unnecessary original titles. (See
page 58.)
You cannot record more than 99
titles on one disc.
(The maximum is 99)
Recording Error
• You are trying to record onto a disc on
which the number of recorded chapters
has reached the maximum (999).
• Delete unnecessary chapter marker from
an Original list. (See page 59.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
Recording Error
• You are trying to record onto the
DVD+RW/+R disc on which the number of
recording titles comes up to the maximum
(49).
• Delete unnecessary titles. (See page 58.)
You cannot record more than 49
titles on one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the DVD+RW
disc on which the number of recording
chapters comes up to the maximum (254).
• Delete unnecessary chapter marks. (See
page 59.)
You cannot record more than
254 chapters on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as
Control Information is full.
• This disc has no space to write Control
Information when recording or deleting
contents.
• Delete unnecessary original titles. (See
page 58.)
• When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this area
may become full.
• Insert a new disc.
• Every time you insert a disc for recording,
part of the disc’s working area will be used.
• If you repeat this frequently, it will be used
up quicker and you may not be able to
record full 99 titles.
Recording Error
This disc is already finalised.
• You are trying to record onto a disc that is
already finalised.
• Release the finalising for the disc. (See
page 41.)
Recording Error
The disc has no recording
compatibility.
• You are trying to record onto the
unfinalised +VR mode discs recorded on
other unit.
• Set “Make Recording Compatible” to “ON”
to rewrite the menu, after that you will
record to disc. (See page 28.)
Set “Make Recording
Compatible” to “ON” to convert
the disc.
* If you are still having trouble with the unit after checking all the Troubleshooting points, write down the error code
and the error description and consult your dealer or an authorised service centre.
EN
78
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 79 Monday, March 26, 2007 10:14 AM
Language Code
Language
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
Language
Code
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
Language
Code
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Abkhazian
French
Lithuanian
Sindhi
Afar
Frisian
Macedonian
Malagasy
Malay
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Afrikaans
Albanian
Amharic
Arabic
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Greenlandic
Guarani
Gujarati
Hausa
Maori
Marathi
Moldavian
Mongolian
Nauru
Hebrew
Hindi
Basque
Bengali;Bangla
Bhutani
Bihari
Nepali
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Norwegian
Occitan
Tamil
Tatar
Oriya
Telugu
Thai
Bislama
Breton
Oromo (Afan)
Panjabi
Tibetan
Tigrinya
Tonga
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Pashto; Pushto
Persian
Irish
Italian
Polish
Tsonga
Turkish
Turkmen
Twi
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Portuguese
Quechua
Rhaeto-Romance
Romanian
Russian
Ukrainian
Urdu
Kinyarwanda
Kirghiz
Samoan
Uzbek
Danish
Sangho
Vietnamese
Volapuk
Welsh
Dutch
Kirundi
Sanskrit
English
Korean
Scots Gaelic
Serbian
Esperanto
Estonian
Faroese
Fiji
Kurdish
Wolof
Laothian
Latin
Serbo-Croatian
Sesotho
Xhosa
Yiddish
Yoruba
Zulu
Latvian; Lettish
Lingala
Setswana
Shona
Finnish
EN
79
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 80 Monday, March 26, 2007 10:14 AM
Glossary
Analogue audio
Finalise
To make DVDs that have been
recorded playable in DVD players. It players with particular areas of the
is possible to finalise DVD-RW/-R
and DVD+RW/+R discs with this
unit.
Region code
Regions associate discs and
An electrical signal that directly
represents sound. In contrast,
digital audio can also be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
world. This unit will only play back
discs that have compatible region
codes. You can find the region code
of your unit by looking on the rear
panel. Some discs are compatible
with more than one region (or all
regions).
INSTANT SKIP
Aspect ratio
This unit can skip TV commercials
during DVD Video playback. Once
[INSTANT SKIP] is pressed, the
start point will be set forward 30
seconds and playback resume
The width of a TV screen relative to
its height. Conventional TVs are 4:3
(i.e., the screen is almost square).
Widescreen models are 16:9 (the
Sampling frequency
The rate at which sound is
measured by a specified interval to
turn it into digital audio data. The
number of samples in one second is
defined as the sampling frequency.
The higher the rate is, the better the
possible sound quality.
disc is usually divided into chapters. JPEG is a method of compressing
S-Video output
Video is output as the individual
signals of colour(C) and
luminance(Y), so a higher-quality
picture will be displayed.
See also Title.
still image files. You can copy JPEG
files on CD-RW/-R discs from a
computer and play back the files on
this unit.
Component video output
Each signal of luminance(Y) and
component (PB/CB, PR/CR) is
independent to output so that you
can experience picture colour as it
is.
Also, due to compatibility with
progressive video (625p/525p), you
can experience higher-density
picture than that in interlace (625i/
525i).
MP3
(MPEG Audio Layer 3)
Title
(DVD)
MP3 is a method of compressing
files. You can copy MP3 files on
CD-RW/-R discs from a computer
and play back the files on this unit.
A collection of chapters on a DVD.
See also chapter.
(Video CD)
PBC (Video CD only)
(Playback Control)
The contents of a Video CD. When
playing back a Video CD with the
PBC function, the Title menu will
appear automatically.
CPRM
(Content Protection for
Recordable Media)
This function enables you to play
back interactive software using a
menu screen. See also Title.
Track
CPRM is a scrambling copy
protection system for the protection
of “copy-once” broadcast
programmes (e.g. some satellite
broadcasts).
PCM
Audio CDs and Video CDs use
tracks to divide the contents of a
disc. The DVD equivalent is called a
chapter. See also Chapter.
(Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can
play back sounds as realistic as
possible by converting even
compressed Dolby Digital and
MPEG audio to PCM.
Digital audio
Video mode
An indirect representation of sound
using numbers. During recording,
the sound is measured at discrete
intervals (44,100 times a second for
CD audio) by an analogue-to-digital
converter, generating a stream of
numbers. On playback, a digital-to-
analogue converter generates an
analogue signal based on these
numbers. See also Sampling
Video mode is the same recording
format as used on the DVD-Videos
you purchase in local shops. You
can play back the discs recorded in
this format in most DVD players,
however it offers only limited editing.
You will need to finalise discs
Playlist
From this list, you can play back
contents of a disc in your desired
order or in sequence. It is also
possible to directly search for a
specific scene.
recorded in Video mode before
playing them back on other unit.
frequency and Analogue audio.
VR mode
Progressive Scan (625p/525p)
A basic recording format for
DVD-RW. VR mode offers advanced
editing, and you can record and edit
material repeatedly, however it is
playable only on VR mode
compatible unit. Finalisation is
recommended before playing them
back on other unit.
Dolby Digital
A type of display that does not split
each frame into fields, and instead
scans directly through all the
scanlines of each frame in order.
Progressive Scan provides less
flickering and higher image
resolution than traditional (625i/
525i) TV signals. Refer to pages 19
and 69 for instructions on the
Progressive Scan mode selection.
A system developed by Dolby
Laboratories that compresses
digital sound. It works with stereo
(2ch) or multi-channel audio.
DTS
(Digital Theater System)
+VR mode
DTS is a multi channel surround
sound system. By connecting to
DTS decoder, you can enjoy
dynamic and realistic sound like
movie theatre. DTS surround sound
technologies were developed by
DTS, Inc.
A recording format for DVD+RW/+R.
+VR mode offers basic editing, and
it is playable on most DVD players.
Finalisation is recommended before
playing them back on other unit.
EN
80
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 81 Monday, March 26, 2007 10:14 AM
Specifications
General
System
DVD-Video, DVD-RW/-R, DVD+RW/+R, CD-DA, CD-RW/-R,
Video Cassette Tape
VCR video heads
Power requirements
Power consumption
Weight
Four heads
220–240 V ± 10%, 50 Hz ± 0.5%
35 W (standby: 5.0 W)
4.3 kg
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
435 x 99.5 x 260 mm
5°C to 40°C
Less than 80% (no condensation)
PAL-I
Recording
Recording format
Video Recording (VR) format (DVD-RW only),
Video format (DVD-RW, DVD-R)
+VR format (DVD+RW, DVD+R)
Recordable discs
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Receivable channels
IRA-E69
Input/Output
Front Panel : (AV3)
Video input
Input level
One RCA connector
1Vp-p (75 Ω)
S-Video input
Input level
One Mini DIN 4-pin jack
Y (Iuminance) 1Vp-p (75 Ω)
C (colour) 300mVp-p (75 Ω)
Audio input
Input level
Two RCA connectors
2Vrms (input impedance: more than 10kΩ)
Rear Panel :
VHF/UHF antenna input/output terminal
Audio input /output
VHF/UHF set 75 Ω
Two 21-pin scart sockets (AV1, AV2)
Video input /output
Input /output level
Two 21-pin scart sockets (AV1, AV2)
1Vp-p (75 Ω) each
S-Video output
Input /output level
One Mini DIN 4-pin jacks
Y (Iuminance) 1Vp-p (75 Ω)
C (colour) 300mVp-p (75 Ω)
Component video output
Output level
Three RCA connectors
Y: 1.0Vp-p (75 Ω)
PB/CB, PR/CR: 0.7Vp-p (75 Ω) each
Audio output
Output level
Two RCA connectors
2Vrms (output impedance: 680 Ω)
Digital audio output
Output level
One Coaxial pin jack
500mVp-p (75 Ω)
Note
The specifications and design of this product are subject to change without notice.
EN
81
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 82 Monday, March 26, 2007 10:14 AM
EN
82
Download from Www.Somanuals.com. All Manuals Search And Download.
E9GA0BD_EN.book Page 83 Monday, March 26, 2007 10:14 AM
EN
83
Download from Www.Somanuals.com. All Manuals Search And Download.
|