Telecommunication Systems Division
Digital Business Telephone Systems
Electronic Telephone
User Guide
(includes LCD and Direct Station Selection Console)
May 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Conventions .................................................................................................................... viii
Chapter 1 – The Grand Tour
Electronic Telephone Diagram ...........................................................................................2
Chapter 2 – Features
Before You Begin .............................................................................................................13
Automatic Line Selection ..............................................................................................14
Ringing Line Preference ................................................................................................14
Signaling ........................................................................................................................14
Quick Reference ................................................................................................................15
Making an Internal Call .................................................................................................15
Making an Outside Call .................................................................................................15
Making an Outside Call to an ISDN Trunk ...................................................................16
Strata DK Electronic Telephone 5/00
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 2 - Features
On-Hook Dialing ...........................................................................................................16
Receiving a Forwarded Call ..........................................................................................17
Account Code Calls ..........................................................................................................18
Automatic Busy Redial (ABR) .........................................................................................21
All Call Voice Page ..........................................................................................................22
Background Music (BGM) ...............................................................................................24
Call Forward–All Calls ..................................................................................................26
Call Forward–Busy ........................................................................................................26
Call Forward–No Answer ..............................................................................................27
Call Forward–Busy/No Answer ....................................................................................28
Call Forward–Fixed .......................................................................................................30
Call Forward–External ...................................................................................................30
Group Pickup ....................................................................................................................36
Call Transfer with Camp-on .............................................................................................37
Call Waiting ......................................................................................................................38
Conference Calls ...............................................................................................................39
Date/Time/Day Adjustment ..............................................................................................39
Direct Inward System Access (DISA) ..............................................................................40
Direct Station Selection (DSS) .........................................................................................41
ii
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Do Not Disturb (DND) .....................................................................................................42
DTMF Tone Dialing with and # ....................................................................................45
Group Listening ................................................................................................................46
Handsfree Answerback .....................................................................................................47
ISDN Outgoing Calling ....................................................................................................48
Microphone Cut-Off .........................................................................................................52
Off-hook Call Announce (OCA) ......................................................................................53
Override Calls ...................................................................................................................55
Do Not Disturb Override ...............................................................................................56
Saved Number Redial .......................................................................................................60
Speed Dial .........................................................................................................................61
Speed Dial–Advanced Features .....................................................................................63
Speed Dial Pause ...........................................................................................................66
Speed Dial Number Linking ..........................................................................................66
Chain Dialing Speed Dial Numbers ..............................................................................68
Timed Reminders ..............................................................................................................69
Tone/Pulse Dialing ............................................................................................................70
Strata DK Electronic Telephone 5/00
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 3 - LCD Operation
Two (Tandem) CO Line Connection ................................................................................70
Busy Lamp Field (BLF) Display ......................................................................................81
Caller ID/ANI/DNIS Information Mode ..........................................................................82
Call Park Orbit List Display .............................................................................................84
Message Notification .....................................................................................................91
Silent Messaging (Busy Station) ...................................................................................94
Name/Number Display .....................................................................................................98
[DSS] Buttons .................................................................................................................102
Calling a Station ..........................................................................................................103
Answering a (CO Line) ...............................................................................................104
Call Forward Override .................................................................................................105
Night Transfer ..............................................................................................................105
Appendix A – Access Codes
CO Line Access Codes ...................................................................................................107
Feature Access Codes .....................................................................................................108
iv
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Paging Access Codes ......................................................................................................108
Centrex Feature Buttons .................................................................................................111
Ringing Repeat ................................................................................................................112
Delayed Ringing .............................................................................................................112
Appendix C – Button Labels
Flexible Buttons ..............................................................................................................113
Index ....................................................................................................................................119
Strata DK Electronic Telephone 5/00
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 4 - Button Labels
vi
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This guide describes how to use electronic telephones for Strata DK systems. Models
covered in this user guide include electronic telephones equipped with a Liquid
Crystal Display (LCD) and/or speakerphone. Instructions for the Electronic Direct
Station Selection (DSS) Console are included. The Strata DK systems which support
this equipment are:
o
o
o
o
DK14
DK16e and 16
DK40i and 40
DK424i, DK424 and DK280 (Release 3.0 or higher)
Note This user guide incorporates the information in the Strata DK Liquid Crystal
Display Electronic Telephone User Guide. This guide is discontinued.
Strata DK Electronic Telephone 5/00
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Organization
Organization
o
o
o
Chapter 1 – The Grand Tour provides an overview of the equipment, buttons,
Light Emitting Diodes (LEDs), and LCDs.
Chapter 2 – Features describes the available electronic telephone features in
alphabetical order. Detailed instructions on using each feature are covered.
Chapter 3 – LCD Operation includes an explanation of the Control button
operations. Features which are available only on the LCD electronic telephone are
presented alphabetically and include detailed LCD displays.
o
o
Chapter 4 – DSS Consoles describes the DSS Console features and buttons.
Appendix A – Access Codes provides instructions for programming a sequence
of steps or access codes onto feature buttons. It includes CO Line Access Codes,
Paging Group Codes, Feature Access Codes (User Programmable Buttons), and
Speed Dial Access Codes.
o
o
Appendix B – Centrex Application describes the Centrex features which may be
available with your Strata DK system.
Appendix C – Button Labels lists the feature button designations of the
electronic telephone models.
Conventions
Letters in [brackets] represent buttons which have Directory Numbers on them. For
example:
Conventions
Description
Elaborates specific items or references other information.
Within some tables, general notes apply to the entire
table and numbered notes apply to specific items.
Note
Important!
CAUTION!
Calls attention to important instructions or information.
Advises you that hardware, software applications, or
data could be damaged if the instructions are not
followed closely.
viii
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Conventions
Conventions
WARNING!
Description
Alerts you when the given task could cause personal
injury or death.
Represents any Directory Number button, also known as
an extension or intercom number.
[DN]
Represents any Primary Directory Number button (the
extension number for the telephone).
[PDN]
Represents any Secondary appearance of a PDN. A PDN
which appears on another telephone is considered an
SDN.
[SDN]
Represents any Phantom Directory Number button (an
additional DN).
[PhDN]
$ULDOꢁ%ROG
Represents telephone buttons.
Courier
Shows a computer keyboard entry or screen display.
Represents LCD displays, tokens or custom IVR
functions. For example: M ( ).
Helvetica Bold
“Type”
Indicates entry of a string of text.
Indicates entry of a single key. For example: Type prog
then press Enter.
“Press”
Shows a multiple PC keyboard or phone button entry.
Entries without spaces between them show a
simultaneous entry. Example: Esc+Enter. Entries with
spaces between them show a sequential entry. Example: #
+ 5.
Plus (+)
Means “through.” Example: 350~640 Hz frequency
range.
Tilde (~)
o
o
Denotes the step in a one-step procedure.
Denotes a procedure.
Grey words within the printed text denote cross-
references. In the electronic version of this document
(Strata DK Library CD-ROM or FYI Internet download),
cross-references appear in blue hypertext.
See Figure 10
Strata DK Electronic Telephone 5/00
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Related Documents and Media
Action/Response
The left column gives you The right column gives the immediate response to your
action. This column also includes additional notes and
comments.
single or numbered steps
that you need to perform a
procedure.
Related Documents and Media
Note Some documents listed here may appear in different versions on the
CD-ROM, FYI, or in print. To find the most current version, check the
version/date in the Publication Information on the back of the document’s title
page.
Refer to the following documents for more information:
o
o
o
Electronic Telephone Quick Reference Guide
PC/Data Interface User Guide
System Administrator Guide
Strata DK documentation and enables you to view, print, and download current
publications.
x
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
1
This chapter familiarizes you with the controls and indicators located on your
electronic key telephone (EKT) (see “20-Button Electronic Key Telephone with LCD”
on Page 2).
Toshiba electronic telephones incorporate state-of-the-art telecommunications
technology and provide a vast array of calling features. They are easy to operate, and
all features are accessed with a feature button or a brief access code.
If your telephone is equipped with an LCD, information and feature prompting makes
call handling more efficient and provides easy access to frequently-used features.
Abbreviated feature prompts guide you through specific tasks.
In addition to the standard features, the LCD telephones provide Alphanumeric
Messaging, Busy Lamp Field (BLF) Identification, Central Office (CO) Line
Identification, Timed Reminders with Messaging, Speed Dial Memo Directory
Dialing, User Name/Number, Call Duration, Date/Time of Day displays, and the
ability to display names and telephone numbers of outside, incoming callers.
Telephones equipped with a speakerphone, enable you to make and receive outside
and internal calls without lifting the handset.
Feature operations in this guide apply to all EKTs, except the 10x and 20x series,
connected to a Strata DK system.
Strata DK Electronic Telephone 5/00
1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Electronic Telephone Diagram
LCD Display
Scroll Button
Page Button
Mode Button
SCRL
PAGE
MODE
Handset
Dial Pad
Speaker
Flexible Buttons
MIC
CONF/TRNS
HOLD
SPKR
Modular
INT
Handset Cord
Feature and
Function LEDs
RNG
VOL
Microphone
2548
[DN] or Intercom Button
Speaker Volume
Control
Sliding Memo Tray
Hold Button
Ring Volume Control
Speaker On/Off Button
Microphone Button
Conference Transfer Button
Figure 1
20-Button Electronic Key Telephone with LCD
2
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Buttons
There are two sets of buttons, fixed and flexible. The fixed buttons, such as 0,&,
+2/', &21)ꢀ7516, and 92/ are shown in Figure 1 on the prior page. The
flexible buttons consist of directory numbers (Primary, Secondary, Phantom) and
feature buttons. The number of preprogrammed flexible buttons varies by telephone.
Fixed Buttons
The fixed buttons are located below your dial pad and enable you to perform standard
functions quickly and easily.
Table 1
Fixed Button Instructions
Button
Instructions
&21)ꢀ7516ꢁ
(Conference/Transfer)
o
o
Press to set up conference and transfer calls (see “Conference Calls”
on Page 39).
Press once to hold internal or outside calls
(the CO LED flashes at the internal hold
HOLD LINE 10
JAN 01 SUN 12:19
rate)
...or press twice to enable Exclusive Hold. The CO LED flashes at the
exclusive hold rate.
Note Exclusive Hold enables you to place a call on hold so that only you
or somebody using a Call Pickup code at another station can
retrieve it.
+2/'
To retrieve a call on hold:
o
Press &2 or [DN] which is on hold
HOLD LINE 201
LINE 10 RECALL
...or if the call is on Exclusive Hold, from
another station dial ꢂꢃ plus your [DN], or dial ꢂꢃꢂꢄ plus the CO Line
number (001~200) that the call is held on.
If a call is not retrieved by a certain time (set in system programming),
it recalls back to your phone. You hear repeated recall tone (or if you
are on the phone, you hear recall tone twice).
Strata DK Electronic Telephone 5/00
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Table 1
Fixed Button Instructions (continued)
Button
Instructions
If the held party hangs up, the call is released and the &2 provides a
hold-release signal.
+2/'ꢁ(continued)
Note If your telephone is programmed for Automatic Hold, existing calls
are automatically placed on hold when you answer a call or make
another call. (See “Automatic Hold” on Page 24.)
A different call can be held on each [DN] or
&2 button on your phone. Each time you
CO LINE 02
HOLD
press 6&5/, a different [DN] or &2 is
selected. The selected button’s LED flashes
rapidly and your LCD displays information for
DN 202
the call holding on that button (samples shown
at right).
HOLD
o
Press to toggle the microphone ON/OFF while the telephone is in use.
The LED indicates the status of the microphone.
Notes
The microphone and accompanying LED are always ON when
o
receiving “voice first” internal [DN] calls to enable Handsfree
Answerback and OFF if you receive a ring-first call. 0,& may be ON/
OFF when placing an on-hook CO Line or internal [DN] call.
0,&
(Microphone)
o
Each station’s 0,& can be set in system programming to switch ON/
OFF with one touch, to switch OFF only while pressed and held, or to
be either ON/OFF at the start of handsfree dialing.
o
0,& functions on Handsfree Answerback and OCA calls for privacy.
o
Press to toggle the speaker ON/OFF. The LED indicates the status of
the speaker. Also selects a line or the internal [PDN] if programmed for
auto preference in system programming. Can be used to disconnect
on-hook speakerphone calls.
63ꢅ5
(Speaker)
92/
o
o
Slide to adjust volume levels (see “Volume Controls” on Page 11).
Slide to adjust the ring volume levels, and the voice levels of the caller
(Handsfree Answerback operation).
5,1*
4
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Flexible Buttons
All flexible buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your System Administrator for button assignments.
You may have buttons designated as /LQH and/or 3/ which enable you to directly
access outside Central Office (CO) lines. 3/ enables you to access available CO Lines
from a group of lines appearing under one button.
CO lines, you can use access codes. For a listing of these codes, see Table 11 on Page
108.
Directory Number [DN] Buttons
The [DN] buttons consist of: [PDNs], [SDNs], and [PhDNs]. They are used to make or
answer a call and are known as your extension or intercom number. You can have
multiple [DN] buttons on your telephone (see Figure 2 on Page 7), including [DNs]
belonging to another [SDNs].
Incoming calls ring your telephone [PDNs] from the top down. For example,
incoming calls to Station 10 [PDNs] first ring the “10-1” button, then “10-2,” and
finally “10-3.” Your station is considered busy only when all of the [PDNs] are being
used by your telephone or other telephones and/or when your telephone is on a call on
any type of CO Line or [DN].
If you have an LCD telephone, you can find out the actual
[DN] of a [DN] button by pressing the [DN] you want to
DN = 210
display and dialing ꢂꢆꢇꢄ. The number (210) displays.
Strata DK Electronic Telephone 5/00
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Table 2
Directory Button Definitions
Button
Definitions
o
Press to answer a call to the Primary Directory Number or to
initiate a phone call.
[PDN]
The [PDN] is specifically your Extension Number or Intercom
Number. Your telephone can have up to four [PDN] buttons with
your number. You can set Call Forward and Voice Mail ID code for
your [PDN].
Primary Directory Number
o
Press to answer a call on a [PDN] of another telephone which
appears on your telephone as a [SDN].
[SDN]
Secondary Directory
Number
You cannot set Call Forward and Voice Mail ID code for [SDNs] on
your telephone.
o
Press to answer a call to the [PhDN].
Up to 8 [PhDNs] can be assigned to one station. A [PhDN] can be
assigned exclusively to a station or shared among a group of
stations. An example of a [PhDN] application is using the [PhDN] as
a common phone number for an entire department, such as a Sales
Department. The [PhDN] rings on all of the telephones of the group
when it is called.
[PhDN]
Phantom Directory Number
You can only set Call Forward and Voice Mail ID code for [PhDNs]
that are owned by your telephone. You can have a separate
message waiting button and mailbox for each up to four [PhDNs] on
your telephone.
6
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
54
58
51
Phantom Directory Numbers
[PhDNs]
51
MW/50
50
50
11-1
11-2
10-1
10-1
10-2
10-3
Secondary Directory Numbers
[SDNs] of Station 11
Calls to Station 11 can be originated
or answered by Station 10 by
pressing the 11-1 or 11-2 button.
10-2
10-3
11-1
11-2
Station 10's Primary Directory
Numbers [PDNs]
Station 10
Station 11
Figure 2
Multiple Directory Numbers Example
Feature Buttons
Preprogrammed feature buttons can be assigned to your telephone and vary for
individual telephones. See Table 7 on Page 64 for a list of all the possible feature
buttons.
If a button does not appear on your display or telephone keystrip label, see your
System Administrator for button assignments.
There are two available features that may not be programmed to buttons on your
telephone – 6'6 andꢁ5'/. For the 6'6 feature, you can substitute the key in any
ꢁꢀꢁ
of the procedures. For the 5'/ feature, you can substitute the ꢂ key for any of its
referenced procedures.
LCD
In its idle state, the 32-character LCD feature of your EKT gives you an accurate desk
clock and calendar combination. The LCD automatically provides a variety of
information and feature prompts to make your call handling easier. When you have an
Strata DK Electronic Telephone 5/00
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
outside call in progress, the elapsed time display shows the duration of the call. You
can also send/receive short messages with other LCD telephones (see “Messages” on
Page 86). All display functions occur automatically as call processing proceeds.
A “+” next to the LCD readout (sample shown at right) on
CF-A 201-203+
your telephone indicates there is more data in memory. Press
JAN 01 TUE 12: 19
6&5/ to advance through the information.
LCD Buttons
The three buttons to the right of the display provide various functions.
Scroll Button
SCRL
Page Button
PAGE
MODE
Mode Button
Figure 3
LCD Buttons
These functions are:
6&5/ which scrolls through:
o
o
Message Waiting station numbers
Speed dial digits (if more than 16 digits) when in Mode 8.
3$*( which:
o
o
Changes Busy Field groups.
Records a user NAME/NUMBER for another station (used by station 200).
Station 200 must be an LCD EKT to record a NAME/NUMBER display for any
other station type.
o
o
Changes displays (date/time, elapsed time, message, call forward, dialed number).
Scrolls through speed dial numbers when using Mode 8.
02'( which:
o
o
Enters or exits various mode functions (see Mode Definitions).
Cancels the beeping tone when using timed reminders.
8
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
Table 3
Mode Definitions
MODE
Definition
Exit mode and return to clock/calendar display.
Display Busy Field.
Send a message to a Busy station.
Send a message to a Called station.
Displays LCD message number NN, where NN is a personal or message. Only
displays the selected message and cannot be used to edit or create a new
message.
Check a Speed Dial number and memo dialing.
Turn OFF Caller ID/ANI/DNIS information mode.
Display Caller ID/ANI/Lost Call stored information.
View Call Park Orbit list.
Send a message to a Remote called station.
Send a message to a Remote calling station.
(See Chapter 3 – LCD Operation for an explanation of how to use these buttons.)
Strata DK Electronic Telephone 5/00
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
LED Indicators
Each line and feature button has a LED next to it which indicates the status of the line
or feature associated with the button. Line LEDs light and/or flash at varying rates to
indicate call status (see Table 4).
Table 4
LED Indicators
Your Station
Other Station (Red)
Use
Interval Rates
CO In-Use
(access outside line)
2 seconds ON, 1/8 second
OFF— 1/8 second ON/OFF
steady
Incoming Call
(while ringing)
1 second ON at 10 pulses/
second—1 second OFF
one second ON/OFF
Hold (outside line)
4 pulses/second for 1/8
second ON/OFF
1/2 second ON/OFF
If using Pooled Line, the hold indication is only
at the station that places the call on hold.
Hold – Consultation
(during consultation/transfer to another
station)
10 pulses/second
10 pulses/second
steady
steady
flashes
Hold – Exclusive (outside line)
1 second at 2 pulses/
second, 1 second at 10
pulses/second
Hold – Recall
(when held call recalls your idle station)
1 second at 2 pulses/
second, 1 second at 10
pulses/second
Hold – Exclusive Recall
steady
Your [DN] flashes 10
pulses/second—1 second
OFF
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy station
from a designated station or AA)
4 pulses/second, 1/8
second ON/OFF
3/4 second ON, 1/8
second OFF
After disconnecting first call...
Alert Signal
10 pulses/second
.5 seconds
2 pulses/second
4 seconds
steady
Conference
10 pulses/second
10
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
On-hook/Off-hook
Some procedures in this user guide instruct you to perform a step while “on-hook” or
“off-hook.” These terms refer to the position of the handset. “Off-hook” indicates that
the handset should be lifted off of the telephone cradle. “On-hook” indicates that the
handset should remain in the cradle and should not be lifted.
Volume Controls
Voice and ring volume levels are controlled by adjustable slides located at the bottom
of the front panel. The right 92/ control adjusts the speaker volume for dial tone,
station Background Music (BGM), Off-hook Call Announce, and voice. The left
5,1* control adjusts the ring tone and handsfree voice announcement levels. The
method for changing the volume varies (see Tables 5 and 6).
Table 5
Using VOL
Feature
Phone Status
Slide
Comments
Adjusting the ring tone volume also
changes the volume level of incoming
Handsfree Answerback and Speaker
OCA calls before they are answered by
pressing a [DN].
Ring Tone Volume/
Incoming Handsfree
Answerback and
Speaker OCA
5,1*ꢁ
control
On-hook, Idle
Table 6
Using VOL with Additional Buttons
Feature
Phone Status
Press
Comments
%*0
BGM over Telephone
Speakers
BGM is activated over your telephone
speakers.
...or [DN] +ꢁ
ꢂꢆꢈꢉꢁand
63ꢅ5
On-hook, Idle
You hear dial tone after pressing the
button. Adjust the volume of the BGM
while listening to the dial tone. The dial
tone volume should be the same as the
BGM after you have adjusted it.
[DN] and
slide the
92/
BGM Volume
On-hook, Idle
control
Press 63ꢅ5 after setting the volume
level.
Strata DK Electronic Telephone 5/00
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Electronic Telephone Diagram
12
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
2
This chapter lists all the electronic telephone features in alphabetical order beginning
on Page 18. These features apply to all EKTs connected to Strata DK Systems, but
they do not apply to digital telephones (DKTs).
Features requiring a telephone equipped with a speakerphone are noted.
Before You Begin
If you are a new user of the Strata DK electronic telephone, you need to find out if
your telephone has been set up for Automatic Line Selection and Ringing Line
Preference. You also need to know if your telephone has Tone or Voice First signaling
when you receive an internal call. The differences between Tone First and Voice First
signaling are:
o
o
Tone First signaling rings.
Voice First signaling does not ring, but sends a long tone, then the caller’s voice.
Each of these features are enabled in system programming and determine how you
make and answer calls on your telephone.
Strata DK Electronic Telephone 5/00
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Before You Begin
Automatic Line Selection
You have Automatic Line Selection, if you go off-hook and
NO. 201
hear dial tone and the [DN], CO, or Pooled Line (PL) LED
lights steady. The LCD displays the station number (201) and
the seized CO Line (11).
USING LINE 11
o To make a call when you have Automatic Line Selection
o Lift the handset or press 63ꢅ5.
You do not have Automatic Line Selection, if you have to press an available [DN] or
CO Line before dialing.
o To make a call when you do not have Automatic Line Selection
o Press the [DN] or &2 first before using the handset or 63ꢅ5.
Ringing Line Preference
You have Ringing Line Preference, if you can answer a &2 ringing your station by
lifting the handset or pressing 63ꢅ5.
You do not have Ringing Line Preference, if you have to press the button associated
with the ringing call (flashing LED) to answer the call.
Signaling
If you hear a long tone, followed by a caller’s voice, you have Voice First Signaling. If
you hear suasive ring tones, you have Tone Signaling.
o To answer a call if you have Voice First Signaling
o Talk in the direction of your telephone, or answer the call as you normally would
using either the handset or 63ꢅ5.
o To answer a call if you have Tone First Signaling
o Lift the handset or press 63ꢅ5 or press the flashing button.
Note You can change to the alternate signaling method when making a call on a
call-by-call basis by pressing ꢉ after dialing an internal telephone number.
14
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Quick Reference
Quick Reference
The following is a quick reference chart for using your telephone’s standard features.
Making an Internal Call
1. Lift the handset
You hear dial tone.
...or press 63ꢅ5
...or a [DN] if you do
not have Automatic
Line Selection.
2. Dial a directory
Your LCD displays the called
number and your number.
NO. 203
201
number (201).
3. Hang up
...or press 63ꢅ5.
Making an Outside Call
1. Lift the handset or
You hear dial tone and your
LCD displays the line
number.
NO. 203
USING LINE 6
press 63ꢅ5
...or press &2 if you
do not have
Automatic Line
Selection
...or 3/
...or [DN], then enter See Table 11 on Page 108.
a CO Line or line
group access code.
2. Dial the telephone
number.
The LED flashes and the
digits are displayed as you
dial (shown at right).
NO. 203
5551374
Strata DK Electronic Telephone 5/00
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Quick Reference
The display automatically
changes from dialed
NO. 203
00: 13: 23
number to elapsed time
after a programmed period.
After you hang up, elapsed
time is displayed for 15
seconds and then changes to
date/time display.
3. Hang up
...or press 63ꢅ5.
Making an Outside Call to an ISDN Trunk
1. Access an outside CO
line.
2. Dial the number.
3. Press 67$57.
The dialed digits will not be sent until you press this
button or until the timer expires. Refer to “ISDN
Outgoing Calling” on Page 48 for more information
on ISDN calls.
On-Hook Dialing
1. Pressꢁ63ꢅ5ꢁif you have Automatic line selection.
2. Access an outside &2 and dial a telephone number.
3. Lift the handset when the called party answers.
Note If you have a full speakerphone, you do not have to lift the handset.
4. Hang up
...or press 63ꢅ5.
16
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Quick Reference
Answering Calls
When you receive an incoming call, the LCD displays either
NO. 203
the CO Line (10)
LINE 10 RINGING
... or the station [PDN] (210).
NO. 203
210 CALLING
o To answer the incoming call
o Lift the handset
The LED changes from incoming call rate to the in-
use rate. Your LCD displays the answered line.
...or press 63ꢅ5
For information on Caller ID/ANI/DNIS LCD
displays for incoming calls, see “LCD Operation” on
Page 79.
...or the flashing
[DN], &2, or 3/ and
lift the handset (if
you do not have
Ringing Line
Preference).
Incoming Call Notification
Muted ringing while you are on a call indicates an incoming call. If another call comes
in during the first call, you can release, transfer, or place the call on hold, then answer
the second call.
o To answer the incoming call
o Press 5/6ꢀ$16, or hold down the hookswitch for about one second.
Calling a Forwarded [DN]
When you call a [DN] that is forwarded (203), the [DN] you
NO. 203
called is shown first. The display changes to the [DN] where
210
your call forwarded (210).
Receiving a Forwarded Call
When a call is forwarded to your [DN] (210), the calling [DN]
NO. 201
(205) is displayed on the left and the [DN] called is displayed
205 CALL 203
on the right (203).
Strata DK Electronic Telephone 5/00
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Account Code Calls
Account Code Calls
Entered before or after a call, Account Codes can be used for a variety of reasons
including billing, tracking, and line restriction applications. Account Codes are
recorded by the system and can, along with the details of the calls, be printed on a
Station Message Detail Recording (SMDR) report.
Forced Account Codes (Verified/Non-Verified)
Some applications require that you enter a Forced Account Code before dialing a
telephone number. There are Verified and Non-Verified Account Codes. If the system
is set for Verified Account Codes, you must enter specific verified codes or the call
does not execute. Verified Account Codes are established in system programming or
by designated stations.
You can bypass Forced Account Code requirements with three emergency numbers,
including 911. See your System Administrator for these numbers.
1. Access a CO Line.
You hear dial tone after accessing the line.
Note If you used LCR, you will not hear dial tone.
2. Enter the Forced
Account Code.
Dial tone stops after entering the first digit. If the
account Code is valid, you hear dial tone again. If the
code is invalid, you hear a busy tone.
3. Dial a telephone
number.
Voluntary Account Codes (Verified/Non-Verified)
Voluntary Account Codes are optional and are used to track calls for client billing
purposes. They can be entered after accessing a CO Line or during a call. An
exception is a code which is required to change the Toll Restriction classification of
your station. This voluntary code gives you access to telephone numbers outside your
usual dialing area and must be entered prior to dialing the telephone number. For
example, if your station is restricted to local area calls, you can make out-of-state calls
by using a Voluntary Account Code set in system programming.
18
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Account Code Calls
If the system is set for Verified Account Codes, you must enter specific verified codes
when entering the Voluntary Account Code or the code is not validated for the SMDR
report.
1. After accessing a CO Your conversation is not
NO. 204
Line, press $&&17
interrupted.
ENTER ACCT CODE
...or 6'6ꢁ+ ꢃꢇ
Note If the Voluntary
Account Code is
not required to dial
out, the account
...or 6'6ꢁ+ ꢇꢃꢇ
(RCTU E/F)
ꢀꢃꢇ if your
...or
code can be entered
during a call.
telephone does not
have a 6'6 button.
2. Enter the Account
Code.
When your station is set for
Verified Account Codes,
you hear a half-second
confirmation tone if the
code is valid.
NO. 204
CODE VERIFIED
The outside party is not able to hear any confirmation
tones when the Account Code digits are being entered.
If your station is programmed not to verify Account
Codes, you do not hear a confirmation tone.
If the code is invalid, you
NO. 204
hear two short tones.
CODE NOT VALID
3. Repeat Steps 1 and 2
to enter more codes.
The last code entered is recorded.
4. Dial a telephone
number.
Any digits dialed after the code is entered in Step 2 is
treated as part of a telephone number.
Strata DK Electronic Telephone 5/00
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Alarm Reset
Alarm Reset
Your Strata DK system can be connected to a facility alarm system. All telephones
produce a startling tone whenever this alarm is activated.
o To reset the alarm
o Press $/50.
Alert Signaling
Alert Signaling enables you to send an alert sound to a designated station or partner by
pressing a single button. This feature is based on the “buzz” key, where, for example,
a manager might alert an administrative assistant to enter the office.
You can have as many as four Alert Signals to send or receive to/from other
telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook)
or in the DND or Call Forward mode.
o To send an Alert Signal
o Press $/(57 and an alert tone sounds at the designated station.
Attendant Console Calling
Up to four Attendant Consoles can be installed per system. There can be up to three
ways to call the Attendant Console depending upon system programming.
1. Press a [DN] + ꢇ.
The call rings the Attendant Console ꢇ button.
2. Dial ꢇ.
The calls rotate between the consoles, if more than
one console is installed.
20
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Automatic Busy Redial (ABR)
o To call a specific console
o Press a [DN] + the
The call rings the console ,Qꢊ'1 (incoming [DN]
button).
console [DN].
Note Your System Administrator can provide the
Attendant Console ,Qꢊ'1s.
o To call all consoles for an emergency
Press [DN] + ꢂꢆꢇꢇ. The call rings the (PJU button on all attendant
consoles.
Automatic Busy Redial (ABR)
After reaching a busy outside number, you can activate ABR so that the Strata DK
system automatically redials the number at regular intervals. If the system redials an
outside number that is still busy, ABR resets and tries again. This feature may not be
allowed on some (or all) lines in your system—depending on the telephone line type
connected.
ABR is not attempted while your station is busy, but continues
NO. 202
to time-out. The system inserts a pause (P) on your LCD
P555 3700
before redialing the number.
1. Press $%5
The LED flashes red.
...or &21)ꢀ7516 + You hear confirmation tone.
ꢂꢆꢆ.
2. Hang up
The system redials, up to 15
times, every 30 or 60
seconds depending on
system programming.
NO. 202
ABR SET
...or press 63ꢅ5.
Your telephone receives ring tone, when ABR dials
the number if it is available.
The [DN] or CO and SPKR LEDs flash.
Strata DK Electronic Telephone 5/00
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
All Call Voice Page
3. Lift the handset or
If you do not pick up the handset or press 63ꢅ5
press 63ꢅ5 and wait within 30 seconds after a connection is made, you hear
for the party to
answer.
a muted ring for another 30 seconds, then the call
disconnects.
o To cancel ABR
o Press $%5
...or [DN] + ꢂꢆꢆ.
All Call Voice Page
You can make an All Call Page to electronic telephones assigned to the “All Call Page
Group.” Stations are assigned to the “All Call Page Group” in system programming.
1. Press $&
...or [DN] + ꢂꢋꢌ.
The $&ꢁbutton pages “All Call Page” telephones, but
does not access external page speakers.
Note ꢂꢋꢌ may also Page external speakers as well
as “All Call Page” telephones depending on
system programming.
2. Make your
announcement in a
normal voice level
and repeat it.
3. Hang up.
22
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Automatic Callback (ACB)
Automatic Callback (ACB)
After reaching a busy/DND station, you can set ACB to have the system call you
when the called station becomes available. You can also set ACB to place you in a
queue for an available CO Line, if you reach a line group in which all lines are busy.
1. Press $&%
You hear a busy tone,
followed by dial tone for
two seconds, then busy tone.
NO. 204
INT 210 ACB SET
...or ꢆ.
When you set ACB at a
busy line group, its access
code number (801) displays.
NO. 204
INT 801 ACB SET
2. Hang up
You can make other calls while waiting for the called
station/line to become available.
...or press 63ꢅ5.
Your telephone rings at a
fast rate when the called
station or CO Line is idle.
NO. 204
210 ACB
The busy or DND station
LED flashes (incoming call)
and its number (210)
displays when it is available.
NO. 204
LINE 3 ACB
The CO Line LED from which you attempted to first
access the line flashes red (incoming call rate). The
seized line number (3) is displayed.
3. Press [DN] to answer After you answer, you hear a single tone, and the LED
the call within three
rings.
flashes.
If you hear a busy tone after answering a callback, the
called party is already on another call or the line has
been seized. Your request is not cancelled. You are
called again the next time the line is idle.
If the original call was made using LCR, the telephone
number is automatically dialed. If you did not use
LCR, you have to redial the telephone number.
Strata DK Electronic Telephone 5/00
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Automatic Hold
o To cancel ACB to a busy or DND station
o Press $&% or [DN] + ꢂꢆꢋ.
Automatic Hold
Automatic Hold enables you to automatically place a call on hold by pressing another
outside &2 or [DN] button—there is no need to press +2/'. Your telephone must be
programmed for this feature, otherwise existing calls drop if you do not press +2/'
before answering or making another call.
o Press a &2 or [DN].
You can make or receive a new call while on another
call. The LED of the accessed CO flashes (in-use), and
your first call is put on hold (LED flashes on-hold).
o To switch between held calls
o Press the &2 or [DN] The LED of the CO just accessed flashes (in-use). The
of the held call.
LED of the CO or [DN] placed on hold flashes (on-
hold).
Background Music (BGM)
If BGM is enabled, you can turn it ON/OFF for your individual station speaker.
o Press %*0
...or [DN] + ꢂꢆꢈꢉ +
Toggles BGM ON/OFF.
Turns BGM ON.
63ꢅ5.
o Press [DN] + ꢂꢆꢈꢇ + Turns BGM OFF.
63ꢅ5.
Note Ignore busy tone after dialing ꢂꢆꢈꢉ and
ꢂꢆꢈꢇ.
Note BGM over external speakers is controlled by the System Administrator.
24
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
Call Forwarding
If your telephone has been system programmed for a &DOOꢁ)RUZDUG button, you can
use a &DOOꢁ)RUZDUG button to set the feature for a [PDN].
If your telephone has more than one [DN], you can assign Call Forward destinations
for each [DN] on your telephone (one [PDN] and up to eight [PhDNs]). Each [DN]
can be independently set for a different Call Forward feature.
Call Forward must be set before the call is received and has priority over the Station
Hunt feature. To set call forward from a [PDN] or [PhDN], you must set the call
forward from your telephone, and it must be programmed as the owner of the [PDN]
or [PhDN].
Note If you hear a re-order tone when following any of the Call Forward steps, your
telephone is not the owner of the [PDN]/[PhDN].
After Call Forward is set, the following calls to your station are forwarded except in
Call Forward-External mode:
o
o
o
o
Internal calls (handsfree and OCA calls optionally may or may not).
Auto Attendant calls.
CO Line calls that ring only on your station.
Transferred CO Line or station calls.
Note CO lines that ring more than one station do not forward.
Access Codes
If your telephone has not been programmed for &DOOꢁ)RUZDUG buttons or you are
forwarding a [PhDN], you must use access codes, such as ꢂꢃꢄꢅ, to set the Call
Forward feature.
LCD Telephones
The LCD on your telephone provides you with call forwarding information. The LCD
examples below are identical to those on your telephone LCD. At times, the entries on
the display scroll off the LCD and only portions of the entries remain.
Strata DK Electronic Telephone 5/00
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
Call Forward–All Calls
This feature enables you to forward all calls automatically to another station. Your
station does not ring.
1. Press &)$&
The LED flashes red. You
hear confirmation tone after
ꢂꢍꢇꢉ is dialed.
NO. 201
CALL FORWARD TO
...or [PDN]/[PhDN] +
ꢂꢍꢇꢉ.
2. Enter the destination
[DN].
NO. 201
ALL FORWARD TO 203
3. Press &)$&
The LED is steady red and
calls forward to the stored
directory number (203).
CF-A 201-203
JAN 01 TUE 12: 19
...or 63ꢅ5 (if access
code used).
o To cancel a Call Forward–All Calls
o Press &)$& + 63ꢅ5
...or [PDN] + ꢂꢍꢇꢉ + 63ꢅ5.
Call Forward–Busy
Call Forward–Busy forwards calls immediately when your station, [PDN], or [PhDN]
is busy or in the DND mode. On “Tone First” systems, if your [PDN] appears on more
than one button on your telephone, Call Forward Busy forwards calls only when all
[PDN] buttons are in use; if there is an idle [PDN], it flashes or rings when called. On
“Voice First” systems, Call Forward Busy forwards all calls any time your telephone
is in use.
1. Press &)%
...or [PDN]/[PhDN] + You hear confirmation tone
ꢂꢍꢇꢎ. after ꢂꢍꢇꢎ is dialed.
The LED flashes red.
NO. 201
CALL FORWARD TO
26
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
2. Enter the destination
[DN].
NO. 201
CALL FORWARD TO 203
3. Press &)%
The LED is steady red and
calls forward to the stored
directory number (203).
CF-B 201-203
JAN 01 TUE 12: 19
...or 63ꢅ5 (if access
code used).
o To cancel a Call Forward–Busy
o Press &)% + 63ꢅ5.
...or [PDN] + ꢂꢍꢇꢎ + 63ꢅ5.
Call Forward–No Answer
This feature forwards all calls to your station if you fail to answer within a designated
time (set by you when you enable the feature). Your station can be programmed to
bypass Call Forward-No Answer when receiving Voice First (handsfree). Callers can
activate ring first by dialing ꢉ during their voice announcement.
1. Press &)1$
The LED flashes red.
NO. 201
CALL FORWARD TO
...or [PDN]/[PhDN] + You hear confirmation tone
ꢂꢍꢇꢋ.
after ꢂꢍꢇꢋ is dialed.
2. Enter the destination
[DN].
NO. 201
CALL FORWARD TO 203
3. Press 6'6
Skip this step, if you
pressed &)1$ in step 1.
NO. 201
LL FORWARD TO 203*
...or if your
ꢀ
telephone does not
The pre-set time delay for
have the 6'6 button. calls forwarding is 12
seconds.
Strata DK Electronic Telephone 5/00
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
4. Enter the time delay
The LCD displays the
amount of time entered
(16).
NO. 201
FORWARD TO 203*16
(ꢇꢈaꢍꢇ) seconds.
Note Skip this step if you
do not want to
change the time.
5. Press &)1$
The LED lights steady red
and calls forward to the
stored directory number
(203).
CF-NA 201-203
JAN 01 TUE 12: 19
...or 5'/, then
63ꢅ5 (if access
code was used in Step
1).
...or ꢂ if your
telephone does not
have the 5'/ button.
o To cancel a Call Forward–No Answer
o Press &)1$ + 63ꢅ5.
...or [PDN] + ꢂꢍꢇꢋ + 63ꢅ5.
Call Forward–Busy/No Answer
This feature forwards all calls to your station immediately whenever you are busy, in
the DND mode, or after ringing and you do not answer the call within a designated
time (set by you when you enable the feature). Your station can be programmed to
bypass Call Forward/No Answer when receiving Voice First (handsfree). Callers can
activate ringing and Call Forward by dialing ꢉ during their voice announcement.
On “tone-first” systems, if your [PDN] appears on more than one button on your
telephone, Call Forward Busy forwards calls only when all [PDN] buttons are in use;
if there is an idle [PDN], it flashes or rings when called. On “voice-first” systems, Call
28
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
Forward Busy forwards all calls any time your telephone is in use and/or any time all
of your [PDNs] are in use by other telephones.
1. Press &)%ꢀ1$
The LED flashes red.
NO. 201
CALL FORWARD TO
...or [PDN]/[PhDN] + You hear confirmation tone
ꢂꢍꢇꢆ.
after ꢂꢍꢇꢆ is dialed.
2. Enter the destination
[DN].
NO. 201
LL FORWARD TO 203
3. Press 6'6
The pre-set time delay for
calls to ring before
forwarding is 12 seconds.
NO. 201
LL FORWARD TO 203*
...press if your
ꢀ
telephone does not
have the 6'6 button.
Note Skip this step, if
you pressed &)%ꢀ
1$ in step 1.
4. Enter the time delay
The LCD displays the
amount of time entered
(16).
NO. 201
FORWARD TO 203*16
(ꢇꢈaꢍꢇ) seconds.
Note Skip this step, if
you do not want to
change the time.
5. Press &)1$
The LED lights steady red
and calls forward to the
stored directory number
(203).
CF-BN 201-203
JAN 01 TUE 12: 19
...or 5'/, then
63ꢅ5
(if access code used
in step 1).
...or ꢂ if your
telephone does not
have an 5'/ button.
Strata DK Electronic Telephone 5/00
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
o To cancel a Call Forward–Busy/No Answer
o Press &)%ꢀ1$ + 63ꢅ5.
...or [PDN] + ꢂꢍꢇꢆ + 63ꢅ5.
Call Forward–Fixed
Call Forward–Fixed forwards calls immediately to a station or voice mail device set in
system programming all internal, private or DID CO Line calls to your station. Your
station does not ring when called. Your station must be assigned with a &)) button in
system programming to activate this feature.
o Press &))
The LED lights steady red and all calls forward to a
station [PDN] or voice mail device set in system
programming.
Call Forward–External
This feature forwards new incoming calls directed to your [PDN] to a destination
outside of the system. [PhDNs] assigned to your telephone do not call forward to
external destinations. Internal calls and transferred calls to your [PDN] also do not
forward to external destinations.
Only incoming calls over CO lines dedicated to immediately ring your [PDN], the
private &2 button, and/or DID line, call forward externally. Any of the other Call
Forward modes can be set for your [PDNs] or [PhDNs] simultaneously with Call
Forward-External.
1. Store the destination
number at Station
Speed Dial location
Code 49.
The Call Forward-External destination can be a
telephone number over a CO Line, a station over a Tie
line, or a station within your Strata DK system. If the
destination is over a CO Line, the CO Line must only
ring at your station.
Only perform Step 1 the first time CF-EXT is set or when you change the
destination. It is not necessary to store the destination each time; it remains in
system memory.
See “Speed Dial–Advanced Features” on Page 63 for details.
30
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Forwarding
When forwarding to an outside destination include the CO line (or CO line
group) access code before the telephone number,
See Table 11 on Page 108 for CO Line/Line Group access codes. The LCR
access code “9” cannot be used.
2. Press &)ꢊ(;7
Incoming calls forward to the destination stored at
Station Speed Dial Location 49.
...or the [PDN]/
[PhDN] + ꢂꢍꢄꢇ.
o To cancel a Call Forward–External
o Press &)²(;7
...or [PDN] + ꢂꢍꢄꢇ + 63ꢅ5.
Call Forward Remote Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
1. Call into the DK
system over a CO
Line programmed for
the DISA feature.
You hear ringback tone signal, then internal dial tone
for 10 seconds.
Try again if you hear busy tone.
Note See the System Administrator for DISA
telephone numbers.
2. Press ꢂꢍꢄꢇ then dial You hear a confirmation tone.
your [PDN] after you
receive dial tone.
If a number is not dialed, the system automatically
makes the DISA CO Line ring as a normal incoming
call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote
Call Forward-
External security
code.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned
to your telephone in system programming.
Strata DK Electronic Telephone 5/00
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Park Orbits
4. Enter the new
Notes
destination number.
o
LCR access code “9” cannot be used as the CO
You can enter an
Line access code.
internal number,
o
When entering CO line access codes (ꢂꢄ;;;),
enter ꢆꢆꢄ;;; instead of ꢂꢄ;;;.
Voice Mail number,
or a CO Line access
code plus an external
telephone number.
With some systems,
you can dial a line
group code instead of
a CO Line number
access code. (See
Appendix A, See
“CO Line Access
Codes” on Page 107.)
5. Press ꢂ.
You hear a confirmation tone.
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in an orbit (the area where
the call is held). Anyone can retrieve the call from the orbit using the same or a
different station. There are 20 General Park Orbits for the system and 1 Personal Park
Orbit for each station.
Once you have parked a call in an orbit, you can:
o
o
o
Hang up and retrieve the parked call at a later time.
Originate another call.
Access a voice paging device to announce the parked call for pickup from another
station.
If you park a call, and it is not retrieved the following occurs:
o
If your station is idle when the system Call Park recall timer expires, the parked
call automatically recalls to your station.
32
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Park Orbits
o
If your station is busy, the parked call camps-on.
If you have an LCD telephone, you can let the system automatically select an
available orbit number which displays on your LCD. To monitor the calls parked at
your station, see “Call Park Orbit List Display” in Chapter 3 – LCD Operation.
o To park a call
1. Press 3$5ꢅ while
The LED flashes
(consultation-hold).
ENTER ORBIT NO
RTRN
on a call
...or &21)ꢀ7516 +
ꢂꢋꢋꢎ.
2. Enter a General Orbit The call is parked and the CO Line flashes (hold), or
Number (ꢌꢇꢇ~ꢌꢉꢌ)
the [DN] LED turns OFF.
...or a valid [PDN]
...or if you have an
LCD, press ꢌꢌꢌ.
The system parks the call on the lowest vacant Orbit
Number.
3. Hang up.
The calling extension or line
number and the orbit
number are shown.
6793 PK ORBIT 900
If the parked call is not
LN 2 ORBIT 900
retrieved within a specified
time, the call rings back to
your phone.
When a parked call recalls
L
2 PK ORBIT 900
your phone, the LCD shows
the line or [DN] that is
recalling and the orbit
number.
Strata DK Electronic Telephone 5/00
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Park and Page
o To retrieve a parked call
1. Press 3$5ꢅ
...or [DN] + ꢂꢋꢋꢎ.
[DN] can be [PDN], [SDN] or [PhDN].
2. Enter the Orbit
Number where the
The [DN] LED flashes at the in-use rate when the call
is retrieved.
Call Park and Page
You can use the Park feature in conjunction with the Page feature. This operation can
be programmed on a 6' button for one-touch activation (See “Feature Access Codes”
on Page 64.)
1. Press &3ꢀ3* while
The LED flashes
(consultation-hold).
HOLD LINE 2
ENTER ORBIT NO.
on a call
...or &21)ꢀ7516+
ꢂꢋꢋꢉ.
2. Enter a General Orbit The call is parked and the CO Line flashes (hold), or
Number (ꢌꢇꢇ~ꢌꢉꢌ)
the [DN] LED turns OFF.
or a valid [PDN]
...or if you have an
LCD, press ꢌꢌꢌ.
The system parks the call on the lowest vacant Orbit
Number.
3. Enter a [DN] or a
Page Group or Zone
access code (see
Tables 12 and 13 on
Page 109).
After you enter an Orbit Number, a short burst of dial
tone prompts you to enter the Page access code.
The LCD shows the ꢌꢌꢌ
HOLD LINE 2
Auto Park entry.
999
The LCD shows the line
HOLD LINE 2
being held and its orbit
L 2 ORBIT 900
number. Example: Line 2 is
held on orbit 900.
34
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Pickup
4. Make your
announcement
(include the Orbit
Number).
5. Hang up to free the
paging device.
If the parked call is not
retrieved within a specified
time, the call rings back to
your phone.
PARK ORBIT 900
HOLD
When a parked call recalls
your phone, the LCD shows
the line or [DN] that is
recalling and the orbit
number.
L
2 PK ORBIT 900
Call Pickup
You can pick up a call that is ringing another station [PDN] or [PhDN], a call placed
on hold at another station, and other types of calls.
When you pick up an internal call, the calling station (200)
NO. 204
displays on the left and the called station (201) displays on the
200 CALL 201
right.
If your call is picked up by another station, the LCD shows
NO. 204
that your call to station (200) was picked up by station (201).
200 PICKUP 201
o To use call pickup
o Press 3ꢅ83
Picks up the [DN] or CO Line that has the ringing or
held call. (This feature is not available on all systems.)
...or [DN] + ꢂꢃꢂꢎ +
[PDN]
...or [PhDN].
Strata DK Electronic Telephone 5/00
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Group Pickup
o To pick up a ringing CO Line in a tenant system
o Press 3ꢅ83ꢁꢏꢉaꢆꢐ
You are connected to a incoming CO Line call for a
Tenant Group (1~4).
...or [DN] + ꢂꢃꢌ.
Notes
o
In non-tenant systems, 3ꢅ83ꢉꢁpicks up any
ringing CO Line.
o
This feature does not pickup held lines or
transferred CO lines that are ringing; use Pickup.
Group Pickup
Stations can be assigned in system programming to pickup groups. As many as 20
groups can be created to enable easy pickup of incoming (new or transferred) or
internal calls that are ringing stations in your group or in other groups. This feature
does not pickup held calls. You may belong to more than one group. See your System
Administrator for group assignments.
o To pickup calls ringing within your group
o Press *53ꢀ3ꢅ83ꢁor a [DN] + ꢂꢃꢂꢋꢆ.
o To pickup calls ringing to other groups
1. Press [DN].
You hear dial tone.
2. Enter ꢂꢃ, then the
You are connected to the call. If the called station
belongs to more than one group, any of the Group
access code
(ꢂꢋꢎꢇ~ꢂꢋꢋꢌ) of the Pickup codes associated with those groups pickup the
group to which the
station belongs.
call.
36
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Transfer with Camp-on
Call Transfer with Camp-on
You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group
[DNs], etc. You cannot transfer (or camp-on) to a station [PDN] or [PhDN] if the
station is in the DND mode, unless the station [PDN] or [PhDN] appears on other
stations.
1. Press &21)ꢀ7516. The CO or [DN] LED flashes (conference rate). You
hear internal dial tone.
2. Dial the [DN] where
the call is be
The CO Line rings the called station. If you hear a
single tone, you can then announce the call over the
called telephone’s speaker. (If you hear ringing tone,
the call was made with Tone Signaling.)
transferred.
3. Announce the call
and hang up if the
station is idle
...or if the station is
busy or does not
answer, hang up
The CO LED flashes (on-hold). If you transferred the
call from a [DN], the [DN]’s LED turns off. The CO
Line or [DN] camps onto the called station and the
called station receives a warning tone. The camped-on
call rings when you hang up.
...or to reconnect to
the transferred line
The CO LED is a steady red
when the called station
NO. 204
CAMP-ON 4
before it is answered, answers the transferred call.
press the flashing &2
or [DN] + ꢂꢆꢎ.
If the call is not answered
after a specified Recall time
set in system programming,
HOLD LINE 2
LN 2 RECALL 203
Camp-on is cancelled. The transferred call returns to
your station if your station or [DN] is idle, sends a
two-tone burst if your telephone is busy.
The LCD shows the CO Line number and the station
number (203) where it was originally transferred.
Strata DK Electronic Telephone 5/00
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Call Waiting
Call Waiting
You can answer a call that is transferred to your station, even when your station is
busy. When another call is camped onto your station, you hear two camp-on tone
beeps and the [DN] or CO LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have a [DN] or
&2 button available to receive the call, two camp-on tone beeps are sent to your
telephone. You must disconnect or transfer the existing call to answer the waiting call.
o To answer a waiting call by placing the current call on hold
o Press +2/'
The existing call is placed on hold. The camped-on
line rings your station (the CO LED flashes to indicate
an incoming call).
...or if your telephone You are connected to the transferred call. The [DN] or
has the Auto Hold
CO LED flashes (in-use).
feature, just press the
flashing [DN] or &2. Note See your System Administrator to find out if
you have Auto Hold.
o To answer a waiting call by disconnecting or transferring the current call
o Hang up or transfer
The camped-on line rings your telephone, and the CO
LED flashes (incoming call).
the existing call
...or press the
This disconnects the current call and connects you to
flashing [DN] or &2. the transferred call. The [DN] or CO LED flashes (in-
use).
38
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Conference Calls
Conference Calls
This feature enables you to add other parties to an existing call. The following
conferencing configurations are possible:
o
o
o
Up to two stations and two CO lines.
Up to three stations and one CO Line.
Up to four stations.
1. Press &21)ꢀ7516. You hear dial tone and the [DN] or line LED flashes
(conference-rate).
2. Dial a [DN] or access If you receive a busy tone or no answer, press &21)ꢀ
a CO Line and dial
the telephone number
to be conferenced.
7516 to return to the original connection.
3. Press &21)ꢀ7516 ꢁ All parties are conferenced. If the second call was
,
when the called party placed on a [DN] or CO Line that appears on your
answers.
telephone, the LED also flashes (in-use rate).
Repeat the procedure to add other CO lines or [DNs],
remembering not to exceed the allowed number.
The new station is not conferenced unless its user lifts the handset or presses a [DN] to
answer.
Date/Time/Day Adjustment
This feature is performed from a designated station. See the System Administrator
Guide for instructions.
Strata DK Electronic Telephone 5/00
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Direct Inward System Access (DISA)
Direct Inward System Access (DISA)
Outside callers with telephones that send Dual-tone Multi-frequency (DTMF) tones
can call on CO lines programmed for DISA and dial a [DN] or outgoing CO Line
without going through an attendant or operator. See the System Administrator for this
number.
o To make an internal DISA Call
1. Dial the DISA CO
Line telephone
number.
You hear a ringback tone signal, then an internal dial
tone for 10 seconds.
If you do not dial within 10 seconds, the system
automatically causes the DISA CO Line to ring a
telephone or group of telephones designated in system
programming. Then, if the call is not answered within
15 seconds after the ringing starts, it disconnects.
2. Dial a [DN].
You hear ring tone. When the station answers, you are
connected.
Note If the call is not answered after 6 rings or 24
seconds, (whichever comes first) you hear
busy tone.
3. Press anytime you
Note To call another station after completing a
DISA station call, the internal party must
transfer you. Station and System Page cannot
be accessed on DISA calls.
ꢀ
hear busy tone and
repeat Step 2 to make
another call.
o To make an external DISA Call
1. Call the DISA CO
Line telephone
number.
You hear a ringback tone signal, then an internal dial
tone for 10 seconds.
If you do not dial within 10 seconds, the system
automatically rings the DISA CO Line as a normal
incoming call. Then, if the call is not answered within
15 seconds after the ringing starts, it disconnects.
40
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Direct Station Selection (DSS)
2. Dial a CO Line or CO If you do not hear dial tone, you must also dial a DISA
Line access code
when you hear dial
tone
security code. See Table 7 on Page 64.
...or dial a CO Line
or CO Line access
code and then a
You hear dial tone.
Note See the System Administrator for the DISA
security code number. If the correct code is
not entered, the call disconnects.
DISA security code.
3. Dial a telephone
number.
If set in system programming, both parties hear a
warning tone approximately 4, 10, or 20 minutes after
the call was made. Press ꢇ to reset the timer each time
the tone sounds (for an additional 4, 10, or 20
minutes). If you do not press ꢇ, the call disconnects
approximately one minute after the tone.
Direct Station Selection (DSS)
This optional feature enables you to use a '66 button to connect directly to another
station. The LED of the button shows the status (idle/busy) of the station and/or the
station’s [PDN].
For example, a station DSS LED shows busy (light steady red) when the station is:
o
o
Busy on a call on any button or is in the DND mode.
Idle, but all appearances of the [PDN] are in use by other stations.
o To connect directly to another station [PDN]
1. Press '66, while
connected to a CO
Line or another
station.
The original party is put on hold. You can call a station
even if the DSS LED shows busy (steady red).
Strata DK Electronic Telephone 5/00
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Do Not Disturb (DND)
2. Announce the call
Note You can transfer the call to an idle or busy
station.
...or transfer the call
by hanging up
...or transfer the call
by pressing
5/6ꢀ$16.
Do Not Disturb (DND)
If your station is in the DND mode, internal, external and transferred calls do not ring
your station and OCA calls are denied. You can continue to make calls while in the
DND mode.
If your [PDN] or [PhDN] appears on other stations, the calls flash on your station and
flash or ring the other stations. Other stations can answer your calls or you can, even
while your station is in the DND mode.
Your “alert partner” telephone can override your DND and signal your telephone by
pressing $/(57 (ꢉaꢆ). Telephones with DND Override can also call your telephone.
o Press '1'
The LED lights steady red and DND mode is
activated.
...or press it again to
deactivate the
feature.
Notes
o
Calls forward from your station immediately, while in the DND mode, if it is set
for Call Forward-Busy or Call Forward-Busy/No Answer.
o
If you press '1' while a call is ringing, the ringing stops, but the LED continues
to flash.
42
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Door Lock
Door Lock
Your telephone may have up to five '5/ꢅ (ꢇaꢆ) buttons, which enables you to
unlock a door.
o Press a door lock
The door unlocks for three or six seconds (set in
system programming). The Unlock Door LED is lit
while the door is unlocked.
button:
Location
'5/ꢅꢁꢇ
'5/ꢅꢁꢉ
'5/ꢅꢁꢎ
'5/ꢅꢁꢋ
'5/ꢅꢁꢆ
Door Phones
Door phones are used to call digital/electronic telephones selected in system
programming. When a door phone calls, you hear a distinctive ringing tone, one or
five times (set in system programming). You can also call a door phone and monitor
the surrounding area. The number of possible door phones vary by Strata DK system,
with up to 12 as the maximum for larger systems.
LCD telephones display the door phone ID when calls are
NO. 204
made to/from door phones. This helps you identify the door
DOOR PHONE 1A
phone [DN]. For example, door phone 1A corresponds to
Door Phone [DN] ꢂꢉꢃꢉ, 1B to ꢂꢉꢃꢎ, etc.
Strata DK Electronic Telephone 5/00
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Door Phones
o To answer a door phone call
1. Lift the handset
...or lift the handset
You hear dial tone.
and press /,1(
.
2. Dial the door
number:
Door Phone
Location
1A
1B
1C
2A
2B
2C
3A
3B
3C
4A
4B
4C
ꢂꢉꢃꢉ
ꢂꢉꢃꢎ
ꢂꢉꢃꢋ
ꢂꢉꢃꢆ
ꢂꢉꢃꢃ
ꢂꢉꢃꢍ
ꢂꢉꢃꢄ
ꢂꢉꢃꢈ
ꢂꢉꢃꢌ
ꢂꢉꢍꢉ
ꢂꢉꢍꢎ
ꢂꢉꢍꢋ
o To pick up a door phone call ringing at another telephone
o Press [DN] + ꢂꢃꢂꢋꢇ. The [DN] LED flashes (in-use) and you are connected
to the door phone.
Note ꢂꢃꢂꢋꢇ access is a system option that may not
be turned on for your system.
44
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
DTMF Tone Dialing with and #
o To call/monitor a door phone
1. With the handset
off-hook, press a
[DN].
You hear dial tone and the LED flashes (in-use).
2. Dial the [DN] for the A two-way talk-path exists between your telephone
desired door location. and the called door phone. You can audibly monitor
the area around the door phone.
Note Door phone [DNs] can be stored on 6'
buttons. See “Speed Dial–Advanced Features”
on Page 63.
DTMF Tone Dialing with and #
ꢀ
You may have to send and ꢂ DTMF tones to some devices or services, such as a
ꢀ
voice mail device or computer output service. DTMF tones are automatically enabled
on stations with 5'/ and 6'6. If you do not have 6'6 and 5'/, you must first dial
, ꢂ to enable these tones.
ꢀ
This feature disables the Speed Dial feature during the call. Speed Dial is restored
when you complete the call or place it on hold.
o To output and ꢂ DTMF tones on a telephone without a SDS/RDLꢁbutton
ꢀ
o Press , then ꢂ
You can now output and ꢂ, DTMF tones, and digits
ꢀ
ꢀ
ꢇ~ꢌ for the duration of the outside call. This
procedure must be repeated on each call when you
require such output.
Strata DK Electronic Telephone 5/00
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Emergency Ringdown/Hotline Service
Emergency Ringdown/Hotline Service
The Emergency Ringdown or Hotline Service feature enables standard telephones to
automatically ring a designated extension by going off-hook. Electronic telephones
cannot perform this feature, but they can receive Emergency Ringdown or Hotline
Service from standard telephones.
Emergency Ringdown is used in healthcare facilities, where it
205 CALLING
is used to assist callers who may not be able to complete a call
RINGDOWN
by dialing. An example of an incoming Emergency Ringdown
call is shown on the right. The calling [DN] and “Ringdown” displays whether soft
keys are ON or OFF.
This same feature is also known as Hotline Service and is often used for telephones in
hotel/motel lobbies.
Group Listening
This feature enables you and people near your telephone to hear the called party over
your speaker, but the called party cannot hear you. You can alternate between parties
as long as the handset is off-hook.
o When your telephone The SPKR LED lights red.
is off-hook on a call,
The person to whom you are talking can be heard
hold down 63ꢅ5.
through the telephone speaker. The person cannot hear
you.
o To deactivate group listening
o Release 63ꢅ5.
The SPKR LED turns OFF. You can talk through the
handset.
46
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Handsfree Answerback
Handsfree Answerback
You can talk back to internal or incoming Tie-line calls without lifting the handset.
o Press 0,&.
When the call comes into your station, do not lift the handset; speak toward the
telephone in a normal voice level. You hear a single long tone, followed by the
caller’s voice.
The LED flashes (incoming call). The MIC LED lights steady red, indicating
your microphone is active. The SPKR LED flashes red.
If you have a speakerphone, the performance is better if you press the called
[DN] button first.
Notes
o
A [DN] must be pressed or the handset must be taken off-hook to actually
answer the call. This is necessary before transferring or placing an internal call
on hold.
o
You can press 92/ to control the volume of the Handsfree Answerback
caller’s voice and ring tone (see “Volume Controls” on Page 11 for more
information).
Handsfree Monitoring
Calls placed on hold by an outside party may be monitored handsfree. This feature
frees you from having to hold the handset to your ear until the outside party returns to
the call.
1. Press and hold
The SPKR LED lights red.
63ꢅ5.
2. Place the handset
on-hook.
The SPKR LED stays on and you can hear the other
party through your telephone speaker.
3. Release 63ꢅ5.
For privacy, press 0,& to turn the microphone off,
otherwise, your conversations may be heard.
Strata DK Electronic Telephone 5/00
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
ISDN Outgoing Calling
4. Lift the handset when Note Your telephone’s 0,& can be set in system
the party returns.
programming to switch ON/OFF with one
touch, to switch OFF only while pressed and
held, or to be either ON/OFF at the start of
handsfree dialing. See your System
Administrator if you want the setting changed.
ISDN Outgoing Calling
This feature enables you to make outgoing calls using an Integrated Services Digital
Network (ISDN) trunk, provided that you are connected to a Strata DK424i, DK424
with software Release 4.0 or higher, or DK40i, and that you subscribe to ISDN lines.
ISDN trunks offer faster call connection setup, and they also provide more connection
circuits.
Making an ISDN outgoing call will either be handled automatically with a timer or by
you initiating the ISDN “Start” sequence. The method depends on your system’s
programming. See your System Administrator to determine the method.
o To make an outgoing call to an ISDN trunk
1. Access an outside CO
line
2. Dial the number.
3. Press 67$57.
The dialed digits will not be sent until you press this
button or until the timer expires.
Making an Outgoing Call with a Subaddress to an ISDN Trunk
Subaddress digits may be required for dialing another department, or to send a call to
equipment, such as a printer. If you need to enter subaddress digits, follow these
instructions:
1. Access an outside CO
line
48
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Message Waiting
2. Dial the number.
3. Press 68%.
This informs the system that the following digits are
the subaddress.
4. Enter the subaddress.
5. Press 67$57.
The dialed digits will not be sent until you press this
button or until the timer expires.
Message Waiting
All telephones have a standard MW/FL LED for receiving/retrieving messages left by
callers that called a [PDN] that was busy or did not answer. Telephones that own
[PhDNs] can also have up to four additional (flexible) message waiting [PhDN/MW]
buttons and LEDs. The fourth message waiting button is reserved for the Message
Center.
The MW/FL LED at the called station flashes to notify you that someone called while
you were busy on another call or away from your office. You can call the other party
back by pressing the 0:ꢀ)/ button. Voice mail devices, as well as people, can leave
message waiting indications.
If you have an LCD telephone, up to four message waiting
NO. 204
displays may be stored on the LCD per each [DN]. The LCD
CALL 203-201+
can show up to three stations that have left messages for your
[PDN] and three for each of your [PhDNs]. The fourth message waiting button is
reserved for the Message Center.
o To answer a Message Waiting on your [PDN]
1. Press 0:ꢀ)/ and lift Your phone rings the station or voice mail device that
the handset.
set the indication. The LED continues to flash red.
If you reach a station that is busy or does not answer,
go on-hook and press 0:ꢀ)/ again. The system
rotates to the next message sender.
Strata DK Electronic Telephone 5/00
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Message Waiting
The LCD can show
up to three stations
that have left
messages for the
[PDN] and three for
each of your
In the example (shown at
right), the display indicates
that station DN [203] received
a message signal from DN [201]. The “+” indicates
additional messages.
NO. 204
CALL 203-201+
[PhDNs].
2. Press 6&5/ to
display them.
3. After receiving the
If the MW/FL LED continues to flash, you have more
message(s), place the messages—repeat the Steps to retrieve them. Voice
handset on hook.
mail devices may cancel the indication after a short
delay.
o To cancel the Message Waiting on your [PDN]
o Press 0:ꢀ)/ and lift Your MW/FL LED turns OFF when the called party
the handset
answers.
Note The called party must answer by either going
off-hook or by pressing 63ꢅ5 for the call to
be cancelled automatically.
...or [DN] + ꢂꢆꢇꢌꢁto Your MW/FL LED turns OFF without calling the
cancel the light. This telephone or VM device.
must be done for
each message
recorded.
50
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Message Waiting
o To retrieve a Message Waiting on your [PhDN]
1. Press the flashing red Your phone rings the station or voice mail device that
MW/FL LED.
left the message. If the called party or voice mail
device answers, the message waiting indication is
cancelled automatically.
If there is no answer, hang up and try at a later time.
The red
MW/FL LED on your phone continues to flash.
2. Press 63ꢅ5 after
receiving the
If you have more messages, the MW/FL LED
continues to flash (red). To answer the next message.
Repeat this procedure.
message
...or place the handset
on-hook.
o To cancel the Message Waiting on your [PhDN]
1. Press 0:ꢀ)/.
2. Enter ꢂꢆꢇꢌ.
3. Press 63ꢅ5.
You hear a steady dial tone.
The dial tone stops.
The MW/FL LED turns OFF indicating that the
message has been canceled.
Strata DK Electronic Telephone 5/00
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Microphone Cut-Off
o To set the Message Waiting LED on another telephone
1. Press [DN] and dial
an internal number.
You hear ringback or busy tone.
2. Press 0:ꢀ)/ or ꢄ.
The MW/FL flashes red at
the called telephone. The
MW/FL LED lights steady
red at your telephone. The
LCD displays the station
[203] where you set a
NO. 201
INT 203 MW SET
message waiting light.
3. Press 63ꢅ5.
The MW/FL LED on your
telephone turns OFF. The
MW/FL LED on the called
telephone flashes until the
called party presses the
flashing LED .
SENT 203
JAN 01 SUN 12: 19
o To cancel a Message Waiting light set on another station
o Press [DN] and dial ꢂꢍꢆ + [PDN] or [PhDN].
Microphone Cut-Off
This feature prevents callers from monitoring the sounds near your telephone when
your telephone receives a handsfree call or cuts-off the telephone microphone. The
MCO LED lights steady red and the MIC and SPKR LEDs do not light when your
telephone is called. When the feature is OFF, the MCO LED is not lit and your
microphone works. The 0&2 functions on Handsfree Answerback and speaker OCA
calls for privacy.
o Press 0&2 to toggle Microphone ON/OFF.
52
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Off-hook Call Announce (OCA)
Off-hook Call Announce (OCA)
This feature enables you to call and speak through the handset or speaker of an busy,
off-hook telephone. The called station must be set in system programming for this
feature to work. The calling station can be set in system programming for OCA to
occur automatically when calling a busy station or by dialing an access code after
receiving busy tone. Automatic OCA only functions on Voice First Signaling systems.
Your telephone can receive Speaker Off-hook Call Announce (SP-OCA) calls which
enables callers to make an announcement through the speaker of your telephone when
it is off-hook. Your telephone must be equipped with optional hardware.
When you receive an OCA call while you are on another call, you hear a short
warning tone followed by an announcement through your telephone speaker.
Stations in the DND mode cannot receive OCA calls unless
NO. 204
the calling station is programmed for DND Override.
210 BUSY OVRD
While on a speaker OCA call, 0,& and 0&2 can be used to
prevent an OCA caller from listening to your conversation with the original party (see
“Microphone Cut-Off” on Page 52).
Voice First Signaling
o To make an OCA call
1. Lift the handset and
You hear a single tone (optional) or nothing and can
talk to the station (Automatic OCA).
dial the [DN].
2. Press ꢎ to OCA the
station and talk, if
you receive a busy
tone.
An optional tone is heard at
the busy station, indicating
that you are connected on an
OCA call.
NO. 203
205 BUSY OVR
Strata DK Electronic Telephone 5/00
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Off-hook Call Announce (OCA)
Tone Signaling
o To make an OCA call
1. Lift the handset and
You may hear busy or ring tone.
dial the [DN].
2. Pressꢁꢎꢉ if you hear
busy tone and speak
to the called station
If you hear busy or ring tone after dialing the first digit
(2 or 1), disregard the tone and dial the second digit to
OCA the called telephone.
...or ꢉꢎ if you hear a
ring tone and speak
to the called station.
If you still hear a busy tone after dialing 21 or 12, the
called telephone is either busy on a speakerphone call
or does not have the OCA option set in system
programming. Either condition blocks OCA.
SP-OCA
o To answer an SP-OCA call
o Speak toward the
microphone of your
phone.
You may want to hold your hand over the handset
mouth piece to prevent the other party from hearing
you.
o To disconnect an SP-OCA call to your station
o Press 63ꢅ5. The SP-OCA call made to your station disconnects.
54
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Override Calls
Override Calls
The available override features are:
o
Busy Override – enables you to send a muted ring tone to a busy station to
indicate that a call is waiting. The muted ring is programmed for each station as
two muted rings only or continued muted rings until the call is answered. This
option applies to the station receiving the muted ring. The muted ring can be sent
to the telephone speaker or to the telephone handset/headset and speaker.
o
Do Not Disturb Override – enables you to send a tone
NO. 204
to an idle or busy station in the DND mode to indicate
INT 210 DND
that a call is coming in. Your telephone can be
programmed to block DND Override. The LCD shows
that the station you called (210) is in the DND mode.
OCA is possible to DND stations from stations that are programmed for DND
Override.
o
Executive Override – enables you to enter an established conversation. Your
phone can also be programmed to block Executive Override from other phones.
The 35,9ꢁdoes not block this feature.
o
Privacy Override – enables you to enter an established call on a private common
CO Line; it does not operate on common [DNs] which are always private (see
“Conference Calls” on Page 39 which allow up to four parties to talk on a [DN]
button).
Up to two station users can enter an existing CO Line-to-station call (i.e., up to three
stations can be connected to a CO Line). You can also use this feature if the station
that is already connected to the CO Line is in the Privacy Release mode. Station users
with 359ꢁ5/6 can allow stations to enter their conversations, even if the station
entering the conversation is not programmed for Privacy Override.
Privacy Override is blocked by DND.
o
Toll Restriction Override – enables toll restriction on individual stations. Each
station can be allowed or denied specific area and office codes, long distance
information calls, international calls, and/or operator-assisted calls. You can
completely override Toll Restriction at selected stations or you can change the
station Toll Restriction class. The station resumes its normal class at the
conclusion of the call.
Strata DK Electronic Telephone 5/00
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Override Calls
Busy Station Override
o Press ꢎ.
A muted tone is heard at the
busy station, indicating that
a call is waiting. The station
number (210) displays.
NO. 203
210 BUSY OVR
Do Not Disturb Override
o Press ꢎ.
A tone signal is heard at the
DND station, indicating a
call is coming in. On your
station, the LCD shows the
station number (210) you
have overridden.
NO. 204
210 DND OVR
Your LCD displays DND
OVR DENY, if the station you
called denies your override.
NO. 204
DND OVR DENY
Executive Override
o Press ꢋ.
You enter the conversation. The called parties may
hear an optional tone signal prior to your entering the
conversation.
The overridden station
NO. 204
number (210) displays on
210 EXEC OVRD
your LCD until the call is
ended.
The overriding station
NO. 210
number (204) displays on
204 EXEC OVRD
the called station LCD until
the override is
disconnected.
56
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Page Announcements
Privacy Override
o Press &2.
Connected parties may hear
an optional tone signal
NO. 204
LINE 03 PRV OVRD
before you are connected.
Your LCD displays the CO
Line identification (CO 03).
The overridden station LCD
displays your station
number (204).
NO. 205
204 PRV OVRD
Toll Restriction Override
1. Access a CO Line.
You hear dial tone. The LED flashes at the in-use rate.
2. Press &21)ꢀ7516
You no longer hear dial tone
and your LCD prompts you
NO. 204
OVERRIDE CODE
+ ꢂꢆꢄ.
to enter a code.
3. Enter the Toll
Restriction Override
Code (four digits).
You hear dial tone. For security reasons, the override
codes are only available on a selected basis. See your
System Administrator.
4. Dial a telephone
number.
The toll call is connected.
Page Announcements
Station users can make page announcements to telephones and external speakers.
1. Press [DN], lift the
handset, and enter a
paging access code.
Each of the page access codes (including the [PDN]
button) can be stored on an 6' button. See Tables 12
and 13 on Page 109.
2. Use a normal voice level to make your announcement, then repeat it.
3. Hang up.
Strata DK Electronic Telephone 5/00
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Privacy On-Line
All Call Page
You can make an All Call Page to electronic telephones assigned to the “All Call Page
Group.” Stations are assigned to the “All Call Page Group” in system programming.
1. Press $&
...or [DN] + ꢂꢋꢌ.
The $&ꢁbutton pages “All Call Page” telephones, but
does not access external page speakers.
Note ꢂꢋꢌ may also Page external speakers as well
as “All Call Page” telephones, depending on
system programming.
2. Make your announcement in a normal voice level and repeat it.
3. Hang up.
Privacy On-Line
With this feature, you can block Privacy Override from being used on your CO Line.
The button does not block Busy or Executive Override.
o Press 35,9
The LED lights steady red. Others are blocked from
entering your CO Line calls when they press a
common &2 Line button.
...or 35,9 again to
The LED turns OFF.
cancel the feature.
Privacy Release
This feature enables others to enter your call on a common CO Line just by pressing
&2 on their telephone. It only works on common CO lines (appearing on more than
one telephone). Privacy Release cannot be used on single appearing CO lines or
multiple [DN] buttons. Calls on common [DNs] are always private and cannot be
accessed by more than one telephone.
58
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Release and Answer
Similar to conference calls, up to three stations can be connected to a CO Line.
o Press 359ꢁ5/6.
The LED lights red. The CO Line flashes at all
appearances. When another station user enters the CO
call by pressing a common CO Line, the Privacy
Release LED turns OFF.
To add a third station, press 359ꢁ5/6 again and the
process is repeated.
Release and Answer
This feature enables you to automatically disconnect or transfer an active call and
answer a new call using a button, instead of the hookswitch. When you receive the
new call, the LED flashes red and you hear a muted, Busy Override or Camp-on busy
tone.l
o Press 5/6ꢀ$16
Releases the original call and answers the new
incoming call.
Note You can press +ROG before 5HOHDVHꢁDQGꢁ
$QV if you do not wish to release the original
call.
...or &21)ꢀ7516
and dial a “transfer
to” destination. Then
press 5/6ꢀ$16
Transfers the original call and answers the new call.
...or '66 of a
“transfer to”
Transfers the original call and answers the new call.
destination, then
press 5/6ꢀ$16.
Strata DK Electronic Telephone 5/00
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Saved Number Redial
Saved Number Redial
This feature enables you to store a dialed telephone or station number, then redial that
number with the touch of a button.
o Press 6$9(.
The last number you dialed is saved for automatic
redial the next time you press this button.
Speakerphone
All electronic telephone users can answer internal calls handsfree (on-hook), but only
users with a speakerphone can make and receive calls without lifting the handset. Any
electronic telephone model with an “S” in the model name is equipped with a
speakerphone.
1. Press and hold
63ꢅ5.
2. Return the handset
on-hook.
3. Release 63ꢅ5.
The call is handsfree (on-hook).
o To change from speakerphone to handset
o Lift the handset.
Your call is now heard through the handset.
o To make a call (on-hook dialing)
1. Access a CO Line
...or press a [DN].
You hear dial tone and the CO or [DN] LED flashes
(in-use).
2. Dial a telephone
number.
You hear ringback tone or busy tone, if busy.
60
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
3. Speak in a normal
voice level toward
the telephone.
Note Your 0,& button must be set in system
programming to ON at the start of a call. If
not, you must press the 0,& button before
talking.
4. Press 63ꢅ5.
Your call is disconnected.
o To answer an incoming call using speakerphone
1. Press the &2 or [DN] The CO or [DN] LED flashes (in-use) and you are
with the flashing
LED with the handset
on-hook.
connected to the call.
2. Speak at a normal voice level toward the telephone.
3. Press 63ꢅ5 to disconnect the call.
Speed Dial
Speed Dial enables you to call a telephone number with a two- or three-digit access
code. There are two types of Speed Dial numbers:
o
o
Station—assigned by individual station users to their own station and can only be
dialed from the station that assigns it.
System—assigned only from attendant consoles or a designated station (typically
the System Administrator station), and can be used by other stations. (See System
Administrator User Guide for storing instructions.)
Important! If you do not perform the following procedures within a specified time
(set in system programming for either one or three minutes) when
storing speed dial numbers, the operation times out and your telephone
returns to idle mode.
Strata DK Electronic Telephone 5/00
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
o To store/replace a telephone number on a Station Speed Dial button
1. Press 5'/ (or ꢂ)
with the handset on-
hook
2. Press 6' to store the
6' buttons are assigned in system programming.
telephone number on
...or 6'6 (or ) and enter the Speed Dial code that you want to store the
ꢁꢀ
telephone number in. See Table 14 on Page 110 for codes.
3. Enter the telephone number (max. 20 digits).
To store longer dialing strings, see Table 15 on Page 110.
To insert a pause or flash signal in the number, see “Speed Dial Pause” on Page
66.
4. Press 5'/ (or ꢂ)
The number is stored.
o Repeat the previous procedure, skipping Step 3.
o To program one-touch telephone number dialing
o Repeat the previous procedure, except for Step 3. For Step 3, press [PDN] +
CO Line access code before the telephone number. See “CO Line Access
Codes” on Page 108.
o To make a call using a SD button or access code
1. Access a CO Line.
If your 6' button
programmed to
automatically access
a CO line, skip this
step.
62
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
2. Press 6'
The system dials the telephone number assigned to the
button/code.
...or 6'6 (or ) +
access code. (See
ꢀ
Table 14 on Page
110.)
Speed Dial–Advanced Features
You can program Speed Dial buttons with feature access codes for a single feature or a
To determine how many digits you have, count 2 digits for &21)ꢀ7516, [PDN] and
+2/' feature buttons and 1 digit for all other dial pad characters.
o To store a feature with a specific 6' button
o Press 5'/ (or ꢂ)ꢁ+ 6' + Feature Access Code + 5'/ꢁ(or ꢂ).
See Table 7 on Page 64 for Feature Access code sequences. Your System
Administrator can tell you which features can be programmed on your
telephone.
o To store a feature with a specific access code
o Press 5'/ (orꢁꢂ)ꢁ+
Important!
6'6 (or ) + Speed
ꢀ
Dial Access Code +
Feature Access Code
+ 5'/ꢁ(or ꢂ).
o
Do not lift the handset while entering the
sequence.
o
If you do not enter the entire sequence within a
specified time (set in system programming for
either one or three minutes), the operation times
out and your telephone returns to idle mode.
o
[PDNs] can be stored in speed dial sequences, but
[PhDNs] and [SDNs] cannot.
Strata DK Electronic Telephone 5/00
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
Table 7
Feature Access Codes
Features
Feature Access Code Sequence
Account Code1 (Frequently used codes)
Automatic Callback
&21)ꢀ7516 + ꢆꢆꢆꢍ + Account code digits
ꢆ
Background Music2 (Telephone Speaker ON)
Background Music2 (Telephone Speaker OFF)
Call Forward—All Calls (To Station or VM)
Call Forward—Busy (To Station or VM)
Call Forward Cancel
[PDN] + ꢆꢆꢆꢈꢉ
[PDN] + ꢆꢆꢆꢈꢇ
[PDN] + ꢆꢆꢍꢇꢉ + Directory Number
[PDN] + ꢆꢆꢍꢇꢎ + Directory Number
[PDN] + ꢆꢆꢍꢇꢉ
Call Forward—No Answer
Call Forward External
[PDN] + ꢆꢆꢍꢇꢋ
[PDN] + ꢆꢆꢍꢄꢇ
Call Forward External Cancel
Door Phone Calling
[PDN] + ꢆꢆꢍꢄꢇ
[PDN] + door phone Directory Number
Hookflash Signal1
&21)ꢀ7516 + ꢆꢆꢆꢃ
ISDN Subaddress
ꢆꢍꢄ
ISDN Start
ꢆꢍꢌ
ISDN Tone
ꢆꢌꢇ
Off-hook Call Announce (Manual Mode)
Overrides (Busy, DND)
ꢎ
Overrides (Executive)
ꢋ
+ROG + [PDN] + ꢆꢆXXX
Page Access4
ꢆꢆXXX = Page Access code - see Table 12 on
Page 109.
64
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
Table 7
Feature Access Codes (continued)
Features
Feature Access Code Sequence
&21)ꢀ7516 + ꢆꢆꢋꢋꢉ + [X X X] + [Y Y Y]
Park Call/Access Page
[X X X]3= 900~919 or 999 park zone number;
[Y Y Y] = page group/zone (See Tables 12 and 13
on Page 109.)
The existing call is parked, and you are
automatically connected to the Page.
Pickup4 (To station, new, or transferred call)
+2/' + [PDN] + ꢆꢆꢃ + station number [PDN]
[PDN] + ꢆꢆꢃꢆꢆꢎꢁ+ [X X X X]
Pickup a held or ringing [PDN] or [PhDN]
(not available on all systems)
[X X X X] = [PDN] or [PhDN] to be picked up
Pickup4 any ringing CO Line (new call only)
Pickup Station Page or Ringing Door Phone4
Pickup4 External Page
+2/' + [PDN] +ꢁꢆꢆꢃꢌ
+2/' + [PDN] +ꢁ ꢆꢆꢃꢆꢆꢋꢇ
[PDN] + ꢆꢆꢃ + ꢆꢆꢄꢇ(ꢇꢉaꢌꢌ)
[PDN] + ꢆꢆꢃ +ꢁꢆꢆꢄ(ꢉꢇꢇaꢎꢇꢇ)
[PDN] + Voice Mail [DN]
Pickup Line on Hold (lines 1~99)5
Pickup Line on Hold (lines 100~200)6
One-touch Voice Mail Access
[PDN] + CO Line Access Code, see Table 11 on
Page 108.)
Outgoing Calls
1. These codes can be used during a CO Line call.
2. Background music speakers can only be turned ON/OFF from Station 200.
3. XXX = Auto Park Orbit 9 9 9 (access the next available park orbit), or General Park Zones 900~919,
or [PDN] on which the call should be parked. Only use 999 with LCD telephones.
4. This feature holds an existing call when the button is pressed. If the button is pressed when not on a
call, pickup or page can still be accessed. These codes can be used during a CO Line call.
5. After pressing the feature button, the user dials the line number (01~99) to pickup the line.
6. After pressing the feature number, the user dials the line number (100~200) to pickup the line.
Strata DK Electronic Telephone 5/00
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
Speed Dial Pause
Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
Regular Pause
Long Pause
The ꢁ0:ꢀ)/ is programmed to
allow a 0.5 or 2 seconds long
(set in system programming)
CO line hookflash when
inputting Speed Dial numbers. It
is displayed on the LCD as “F-”.
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays “P-”.
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays “L-”.
Press 0:ꢀ)/
Pressꢁ3$8
Press ꢁ3$8ꢀ/.
.
...or enter the hookflash dial
code (&21)ꢀ7516 + ꢂꢆꢃ).
Note Your telephone must have a 3$8 key to allow 0:ꢀ)/ to be used to store a hookflash in Speed
Dial.
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. This enables up to 36 digits to
be stored under one Station 6SHHGꢁ'LDO button or code. Typically, long, frequently
used access numbers are stored as part of this digit string. The System Speed Dial
number dials out first, then the number linked to it.
Note A designated station can be used to link System Speed Dial codes. See the
System Administrator User Guide.
Important! Before linking Speed Dial Numbers, make sure the System
Administrator has stored the desired number in the System Speed Dial
that you are planning to use.
66
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
o To link station/system speed dial numbers
1. Press 5'/ (orꢁꢂ).
2. Press 6'
...or 6'6 (or ) + a Station Speed Dial Access Code. (See “Speed Dial Access
ꢀ
Codes” on Page 110 for access codes.)
3. Press 6'6ꢁ(or ).
ꢀ
Enter the System Speed Dial Access Code to which the number is to be linked.
(See “System Speed Dial Number Linking” on Page 110.)
4. Enter the telephone number to be stored (max. 16 digits).
5. Press 5'/ꢁ(or ꢂ).
The number is stored and is automatically dialed when the optional linked
station 6' button is pressed or the linked Station Speed Dial access code is
dialed.
Speed Dial Linking Example
The following examples illustrate what a System Administrator and station user can
store (CO Line access code plus international long distance dialing codes in System
Speed Dial locations) as linked speed dial codes.
The System Administrator stores the CO Line access code and the international
dialing sequence (9011813) in the System Speed Dial location *690 from the
administrator’s station.
o Press 5'/ (or ꢂ) + 6'6 (or ) + ꢍꢌꢇ + [PDN] + ꢌꢇꢉꢉꢈꢉꢋ + 5'/ꢁ(or ꢂ).
ꢀ
Note When you press [PDN], the letter “I” (Intercom) is displayed on your LCD. It
is the [PDN] that is used to automatically access internal dial tone before
dialing the remaining numbers in the Speed Dial sequence (in our example
that number is 9011813).
ꢍꢌꢇ is the System Speed Dial Code that is to be linked.
ꢌ is the CO Line access code.
Strata DK Electronic Telephone 5/00
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Speed Dial
ꢇꢉꢉ is the international area code.
ꢈꢉ is the country code (example: Japan).
ꢋ is the city code (example: Tokyo).
The Station User stores the System Speed Dial information on Speed Dial Code 10.
ꢀ
o Press 5'/ꢁ(or ꢂ) + 6'6ꢁ(or ) +ꢉꢇ + 6'6ꢁ(orꢁꢀ) + ꢍꢌꢇꢃꢈꢄꢍꢌꢋꢄꢆ + 5'/ (orꢁ
ꢂ).
ꢉꢇ is the Station Speed Dial Code.
ꢍꢌꢇ is the System Speed Dial Code being linked to Speed Dial Code 10.
ꢃꢈꢄꢍꢊꢌꢋꢄꢆ is the local Tokyo telephone number.
o To use the new link
o Press the 6'ꢁ(ꢉꢇ)
Your telephone automatically dials ꢌ to access a CO
Line, the international dialing sequence (011813), and
the local telephone number (58769374).
...or 6'6 (orꢁꢀ)ꢁ+
ꢉꢇ
.
Chain Dialing Speed Dial Numbers
You can call two or more Speed Dial numbers during one call. This enables you to add
dialing of a stored code, such as a credit card number, to send to a far-end computer.
o To chain dial Speed Dial numbers
1. Access a CO Line. (See Table 11 on Page 108 for CO Line Access Codes.)
2. Press 6'6 (or )ꢁand dial the Speed Dial code for the telephone number to be dialed.
ꢀ
(See Table 11 on Page 108 for Speed Dial Codes.)
3. To dial another telephone number, press &21) and repeat Steps 1 and 2.
68
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Timed Reminders
Timed Reminders
You can set five separate reminders at your station. At the time (hour and minute) set
by you, your telephone beeps. If your phone has an LCD, the message is also
displayed. You can set the reminder to occur once or on a daily basis.
1. Press a [DN] and dial a timed reminder number
(ꢂꢍꢇꢃ~ꢂꢍꢇꢌ).
#605 TIMER SET
2. Enter the time you want to be reminded.
#605 TIMER SET 0800
Use a 24-hour clock format (HHMM).
3. Press ꢇ for the reminder to be repeated every day, or
ꢉ for a one-time reminder only.
#605 TIMER SET 08001
4. Enter desired LCD message station number (ꢉꢇ~ꢉꢌ)
or system number (ꢍꢇ~ꢌꢌ)
605 TIMER SET 0800110
...or enter ꢇꢇꢁif your telephone does not have an
LCD or if you do not want a message to display
when the time reminder tone sounds.
5. Press 5'/.
DATA PROGRAMED
The time is recorded in memory and you should hear
a beeping tone (along with the displayed message)
for 30 seconds at the set time.
6. To cancel the beeping/message prior to 30 seconds,
press 0RGH + ꢇ or take the phone off-hook.
Strata DK Electronic Telephone 5/00
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Tone/Pulse Dialing
o To cancel a Timed Reminder
1. Press [DN], then the
number of the timed
reminder
You can only cancel one reminder at a time.
The reminder is cancelled.
(ꢂꢍꢇꢃ~ꢂꢍꢇꢌ) you
want to cancel.
2. Press 5'/.
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on CO lines that are
programmed for rotary dial pulses. This feature enables you, while on these lines, to
switch to tone dial in order to access remote equipment (such as an answering
machine) requiring DTMF tones.
1. Access a CO Line.
Although the CO Line is programmed for rotary dial
pulses, access the CO Line and dial the telephone
number like any other call.
2. Dial a telephone
number.
3. Press 721( while
The Tone LED lights steady red, and you are able to
send DTMF tones with your dial pad. The feature is
cancelled when the call is completed.
on the call.
Two (Tandem) CO Line Connection
This feature enables a station user to connect two CO lines, then drop out of the
conversation. On some systems, both &2 buttons (or 3/ꢁbuttons) must appear on
your telephone to allow Tandem connections to be established from your telephone.
70
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Two (Tandem) CO Line Connection
o To connect two outside lines using a [DN] button
1. Press &21)ꢀ7516
while talking on an
outside call using a
[DN] button.
You hear dial tone. The [DN] LED flashes (conference
rate).
2. Enter a CO Line
access code and then
the outside telephone
number.
See Table 11 on Page
108 for CO Line
access codes or ask
your System
Administrator.
3. Press &21)ꢀ7516
after the party
The [DN] LED flashes (in-use rate), and all parties are
conferenced.
answers.
...or [DN] to return to
the original
connection if you
receive a busy tone/
no answer.
4. Press &21)ꢀ7516
You hear dial tone before
you hang-up. The [DN]
TRK-TRK N1 N2
JAN 10 THU 11: 57
and hang-up.
LED flashes (exclusive-
hold rate) and the two lines
are connected. N1 and N2
identify the connected CO
lines.
Strata DK Electronic Telephone 5/00
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Two (Tandem) CO Line Connection
Note If the public telephone company provides auto
disconnect, the connection may release
automatically when the parties hang up. If not,
the lines must be supervised to be
disconnected. See “To connect two outside
lines (using a &2 button)” on Page 72.
o To connect two outside lines (using a &2 button)
1. Press &2
...or 3/ and dial a
You hear dial tone.
telephone number.
2. After the party
answers, press
You hear dial tone. The CO LED flashes (conference
rate). The new CO LED flashes (in-use rate).
&21)ꢀ7516.
3. Press another &2
...or 3/ and dial a
telephone number.
...or on some
It is not necessary to have both &2 buttons on your
telephone.
systems, you can
press &21)ꢀ7516
and dial a CO Line
access code and then
dial a telephone
number.
4. Press &21)ꢀ7516
after the party
The CO LEDs both flash (in-use rate) and all parties
are conferenced.
answers.
...or the original &2
button if you receive
a busy tone/no
answer.
72
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Two (Tandem) CO Line Connection
5. Press &21)ꢀ7516
You hear dial tone. Both
CO LEDs continue to flash
(exclusive-hold rate) and
the two lines are connected.
N1 and N2 identify the
TRK-TRK N1 N2
JAN 10 THU 11: 57
and hang up.
connected CO lines.
The LED turns OFF when the parties hang-up.
Note If the public telephone company provides auto
disconnect, the connection may release
automatically when the parties hang up. If not,
the lines must be supervised to be
disconnected.
o To supervise a tandem call and release it
1. Press [DN]
...or &2
You are connected to both
TRK-TRK N1 N2
JAN 10 THU 11: 57
CO lines. Both CO LEDs
flash (in-use rate). N1 and
N2 identify the connected
CO lines.
...or 3/.
2. Go back on-hook if
Both CO LEDs turn OFF, and the connection is
the parties have hung released.
up
...or press &21)ꢀ
7516 and hang-up
if the parties are still
talking.
Strata DK Electronic Telephone 5/00
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Voice Mail Integration
Voice Mail Integration
This section explains how to program your telephone to forward and retrieve
messages when using a Toshiba Voice Mail System with your Strata DK system. Refer
to the appropriate Toshiba Voice Mail User Guide for more information:
o
o
Stratagy Voice Processing User Guide
Toshiba VP User Guide
To direct forwarded calls to your mailbox—your personal storage space for voice
messages—and to ensure that callers receive your personal greeting, you must store a
Voice Mail (VM) Identification (ID) code. You need to store the ID code only once.
Once the ID code is stored, whenever a call is forwarded from your station, it is
automatically sent to voice mail and to your mailbox. Your [PDN] and up to four
[PhDNs] can be set up for unique (or the same) mailbox numbers. Telephones must
be programmed as the owners of a [PhDN] to be able to use this feature.
o To assign a voice mail message mailbox number
This procedure is required for the initial storage of VM ID code to the Toshiba Voice
Mail system. Once programmed, these digits remain in memory until changed. To
change the code, repeat this procedure.
1. Press [DN] + ꢂꢍꢃꢍ.
You hear confirmation tone.
656 ID CODE SET
2. Enter the voice mail
Example: for Toshiba voice
ID code and the voice mail systems, enter ꢌꢉ + the
91203
mailbox [DN], plus
any required pauses
(up to 16 characters).
mailbox number.
203= mailbox number of the
[DN] you pressed in Step 1.
3. Press 5'/ (or ꢂ).
You hear a confirmation
tone. The LCD confirms the
data storage.
DATA PROGRAMED
74
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Voice Mail Integration
o To cancel the mailbox number
o Press [DN] + ꢂꢍꢃꢍ + Your mailbox number is canceled.
5'/ (orꢁꢂ).
You can program a flashing 0:ꢀ)/ to automatically retrieve your voice mail
messages when it is pressed. Storing the message retrieval sequence in Steps 1~4
below is required only once. It remains in memory unless cancelled or changed.
o To assign the message retrieval sequence
1. Press [DN] + ꢂꢍꢃꢄ.
You hear a confirmation
tone.
657 ID CODE SET
2. Enter the voice mail
system code and the
voice mailbox [DN],
plus any required
pauses (16 chars.
max.).
Example: for Toshiba voice
mail systems, enter ꢌꢎ + the
mailbox number.
92203
203= mailbox number.
3. Enter your security
code.
By storing your security code, you avoid having to
enter your code every time you access your mailbox;
however, this also allows anyone to retrieve your
messages from your phone. If a security code is not
desired, do not include it.
4. Press 5'/ (or ꢂ).
You hear confirmation tone.
The LCD confirms the data
DATA PROGRAMMED
storage.
o To retrieve messages with MW/FL button
o Press the MW/FL
Message is retrieved.
flashing LED.
Strata DK Electronic Telephone 5/00
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Voice Mail Integration
o To cancel automatic retrieval
o Press [DN] + ꢂꢍꢃꢄ + Automatic retrieval is canceled.
5'/ (or ꢂ).
o To retrieve multiple messages (LCD Telephones)
1. Press 0:ꢀ)/ with
The displayed station is
called.
the flashing LED.
2. Press 6&5/ to rotate When a message waiting
NO. 203
through more
message waiting
sources.
voice mail is displayed, a V
follows the station number.
If a + sign is displayed, you
have message waiting
indications from more than
one source (voice mail or
stations).
CALL 200 216V+
By setting Call Forward to the Toshiba Voice Mail System on your telephone, callers
are automatically connected to your voice mailbox.
Note Call Forward buttons can only be used to Call Forward [PDNs]; access codes
can be used to Call Forward [PDNs] or [PhDNs].
o To forward calls to voice mail
1. Press &)$&, &)%,
&)%ꢀ1$, &)1$, or
&))
The LED flashes.
Note Select the button that reflects the type of call
you want to forward to voice mail (e.g.,
forward all calls, forward busy/no answer
calls, etc).
76
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Voice Mail Integration
...or a [PDN] or
[PhDN] + access
code.
You hear a confirmation tone after entering the access
code. The Call Forward access codes are:
Call Forward-All Calls:
Call Forward-Busy:
ꢂꢍꢇꢉ
ꢂꢍꢇꢎ
ꢂꢍꢇꢋ
ꢂꢍꢇꢆ
Call Forward-No Answer:
Call Forward-Busy-No Answer:
2. Dial the Voice Mail
System Directory
See your System Administrator for the correct voice
mail [DN]. After dialing, you hear confirmation tone.
number__________.
3. Press &)
If your phone has &) assigned, its LED lights steady
red.
...or 6'6 (or ) +
5'/ (or ꢂ) + 63ꢅ5.
ꢀ
o To cancel Call Forward
o Press &)
The Call Forward LED turns off.
...or a [PDN] or
[PhDN] + ꢂꢍꢇꢉ,
then hang up.
You hear a confirmation tone, and Call Forward is
cancelled.
Strata DK Electronic Telephone 5/00
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Voice Mail Integration
78
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
3
This chapter covers the LCD, its buttons and displays. Special features available only
given. (For electronic telephone standard features, see Chapter 1 – The Grand Tour.)
Control Buttons
The 02'(, 3$*( and 6&5/ buttons are active when your telephone is idle. Table 8
on Page 79 lists button functions.
Table 8
Button Definitions
Button
Definitions
exit the following mode functions.
exit from any mode” on Page 80).
ꢇ
Busy Lamp Field (BLF) display (see “Busy Lamp Field (BLF) Display”
on Page 81).
02'(
ꢉ
Busy station messaging (see “Silent Messaging (Busy Station)” on
Page 94).
ꢎ
Called station messaging (see “Notification Station Messaging” on
Page 91).
ꢆ
Strata DK Electronic Telephone 5/00
79
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Control Buttons
Table 8
Button Definitions (continued)
Button
Displays LCD message number NN, where NN can be personal
message. It cannot be used to edit or create a new message.
02'(
(continued)
ꢃ
Dial Lost Calls” on Page 84).
ꢈ
Caller ID/ANI/DNIS information mode OFF (see “Caller ID/ANI/DNIS
Information Mode” on Page 82).
ꢍꢇ
ꢍꢉ
Caller ID/ANI/DNIS information mode ON (see “Caller ID/ANI/DNIS
Information Mode” on Page 82).
Caller ID/ANI/Lost Call stored information display (see “Retrieve and
Auto Dial Lost Calls” on Page 84).
ꢍꢎ
ꢍꢆ
ꢌꢆ
View Call Park Orbit list (see “Call Park Orbit List Display” on Page 84).
Remote called station messaging (see “Group Notification Station
Messaging” on Page 93).
Remote calling station messaging (see “Notification Station
Messaging” on Page 91).
ꢌꢃ
o
o
Changes Busy Field groups.
Changes displays (date/time, elapsed time,
message, call forward, dialed number).
NO. 204
AY 24 MON 12: 05
3$*(
6&5/
o
Scrolls through speed dial numbers when in
Mode 8.
o
o
Scrolls through message waiting numbers.
Scrolls through the speed dial digits (if more than 16 digits) when in Mode 8.
o To exit from any mode
1. Press 02'(.
MODE NO. ?
2. Press ꢇ.
The LCD displays date/day/
time.
JUNE 03 TUE 03:54
80
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Busy Lamp Field (BLF) Display
Busy Lamp Field (BLF) Display
This feature displays when a station is busy or ringing on any type of [DN] or CO
Line. If one or all telephone [PDNs] are in use on another telephone, the telephone
shows busy on the BLF, even though it may be idle. If a telephone is in the DND
mode, the telephone BLF appearance displays busy.
Starting with the number entered, the BLF displays a group of 10 [PDNs] per line; a
total of 20 for the LCD. Pressing 3$*( scrolls the display. The BLF mode stops all
other displays from appearing on your LCD.
1. Press 02'( + ꢉ.
BLF NO. ?
2. Press ꢂ if [PDNs] are For example, if you enter 2#
200 0 . . . 5 . . . . .
two digits
for 200, the list of telephone
[DNs] beginning with the
200 display.The sample
LCD (shown at right)
indicates that stations 200,
205, and 217 are in use or
DND mode.
210 . . . . . . 7 . . .
...or enter the first
digit of a three-digit
[PDN]
...or enter the first two
digits of a four-digit
[PDN].
3. Press ꢂ.
4. Press 3$*( to rotate The 200/210 group changes
210 . . . . . . 7 . . .
220 . . 2 . 4 . . . . 9
BLF groups.
to 210/220.
Strata DK Electronic Telephone 5/00
81
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Caller ID/ANI/DNIS Information Mode
Caller ID/ANI/DNIS Information Mode
Automatic Number Identification (ANI) information cannot co-exist on the same
telephone LCD with Dialed Number Identification Service (DNIS) information. If
your system is programmed to receive both ANI and DNIS information on incoming
calls, press 3$*( while the call is ringing to alternate between DNIS and ANI/Caller
DNIS
Incoming DNIS telephone numbers can be correlated in the system database with
assigned DNIS names. These names, up to 16 alphanumeric characters, display on
your telephone’s LCD, enabling incoming calls to be instantly identified and
appropriately answered. Table 9 on Page 83 shows DNIS samples.
ANI/Caller ID
If your telephone is programmed to receive Caller ID names and numbers, the calling
party name displays.
o To display the number while the call is ringing
o While the call is
MR. JONES
LINE 3 RINGING
ringing, press 3$*(.
Table 9 on Page 83 shows ANI samples. If Caller ID was activated, then the caller
name and/or number would appear on the first line.
o To activate the Caller ID/ANI or DNIS display mode
o Press 02'( + ꢍꢉ. The system default is ON.
o To deactivate the Caller ID/ANI or DNIS display mode
o Press 02'( + ꢍꢇ.
82
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Caller ID/ANI/DNIS Information Mode
Table 9
DNIS/ANI Samples
Function
ANI/Caller ID Number1
DNIS/Caller ID Name
TOSHIBA TSD
LINE CALLING
CN: 7145556782
LINE 3 RINGING
Incoming Call
3
TOSHIBA TSD
LINE RINGING
Incoming ACD Call
3
Answered incoming or transferred call.
Display changes to call duration.
CN: 7145556782
ANSWERED LINE 3
TOSHIBA TSD
ANSWERED LINE 3
HOLD LINE
3
Call placed on-hold.
SEP TUES 18:30
9
CN: 7145556782
LINE 3 RECALL
TOSHIBA TSD
Held call recalls your station.
LINE
3
RECALL
Station 201 is transferring a call to you
(station 200).
NO. 200
201 CALLING
CN: 7145556782
LN 3 TRANS 201
TOSHIBA TSD
LINE TRANS 201
Transferred station (201) hangs up.
Transferred call recalls your station (201).
Call forwarded to your phone.
3
CN: 7145556782
L 3 RECALL 201
TOSHIBA TSD
RECALL 201
L
3
TOSHIBA TSD
LINE CALL 201
3
1. Caller ID numbers do not display CN: before the number, whereas ANI does.
Strata DK Electronic Telephone 5/00
83
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Call Park Orbit List Display
Call Park Orbit List Display
This feature enables you to monitor (view) the calls that are parked at your station.
o Press 02'( + ꢍꢆ
while your phone is
idle.
LCD shows the CO Line
number (003) and the orbit
number where the call is
parked (900).
LN 3 ORBIT 900+
...or 2UELWꢁ/LVW. To
scan the Orbit List,
press 6&5/.
Retrieve and Auto Dial Lost Calls
The system automatically saves the numbers for all calls that ring at your telephone,
but are unanswered (lost calls). This feature enables you to view the stored
information, view the time and date, delete the information without returning the call,
and/or Auto Dial the saved numbers.
o To view lost calls
1. Press 02'( + ꢍꢎ.
The phone number and
caller name are displayed on
your LCD. ANI/Caller ID
numbers always include
area codes.
MR. JONES
7145553700
2. Press 6&5/
The next lost call is
displayed.
MR. SMITH
7145568725
...or
The lost call prior to the call
displayed after pressing
6&5/ is displayed.
MS. DOE
7143723546
ꢀ
84
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Retrieve and Auto Dial Lost Calls
...or 3$*(.
You can toggle between the
phone number and caller
name screen and the date
and time screen.
MR. JONES
7145553700
Note CN: Identifies ANI
calls as opposed to
Caller ID calls
which do not
display CN:.
06/02 17: 46
CN: 7145553700
o To delete lost call
1. Press 02'( + ꢍꢎ.
The first lost call phone
number and caller name are
displayed on your LCD.
ANI/Caller ID numbers
always include area codes.
MR. SMITH
7145568725
2. Press 6&5/
The next lost call is
displayed.
...or
The lost call prior to the call
displayed after pressing
6&5/ is displayed.
MS. DOE
7143723546
ꢀ
...or ꢂ.
The lost call information is deleted without auto
dialing the call.
o To Auto Dial the lost call
1. Press 02'( + ꢍꢎ.
The phone number and
caller name are displayed on
MR. SMITH
7145568725
your LCD. ANI/Caller ID
numbers always include
area codes.
2. Press 6&5/
The next lost call is
displayed.
Strata DK Electronic Telephone 5/00
85
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
...or .
The lost call prior to the call
displayed after pressing
6&5/ is displayed.
MS. DOE
7143723546
ꢀ
3. Press &2
...or a [DN] + CO
You hear dial tone.
Line access code.
4. Press /&$'.
The DK System auto dials the digit “1” before dialing
the saved, outgoing telephone number.
Messages
The LCD on your telephone can be used to send or receive
BACK AT 2-PM-CALL
MEETING FOR 3PM
calling your telephone or the name of the person you are calling. Names and memos
can also be set to display with speed dial numbers and timed reminders.
You can write or edit a station message (10~19), “fill in the blanks” of system
messages 62~64, enter a name/title that you want to display when other stations call
your station (see “Name/Number Display” on Page 98), or enter a Speed Dial (see
“Speed Dial Memos” on Page 96) or Timed Reminder memo (see “Timed Reminders”
on Page 69).
System messages 65~99, if available, are written by the System Administrator and
cannot be edited by the user
o To enter LCD characters
1. Access message/
A cursor (—) appears at the first character in the
display.
memo/name display.
86
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
2. Enter the message/
name/memo (up to 32
alphanumeric
See Table 10 on Page 87 for dial pad key equivalents.
characters), using the
following dial pad keys
(dial pad shown at
right):
2358
Move Right
(Alpha mode only)
ꢉ – moves right
– moves left
ꢂꢀꢁ²ꢁtoggles between
Move Left
Toggles between
alphanumeric
characters
alphanumeric mode
(dial pad defaults to
numeric mode)
Scrolls alpha/
special characters
ꢇ – scrolls the alpha/
special characters.
3. To blank out any
portion of a message,
press ꢉ (in alpha mode)
and move the cursor to
the right.
Each character the cursor transverses is deleted.
Table 10
Dial Pad Key Equivalents
Letter
Key Equiv.
Letter
Key Equiv.
Letter
Key Equiv.
ꢄꢇꢇ
ꢈ
Symbol
Key Equiv.
ꢉꢇꢇꢇ
A
B
C
D
E
F
G
H
I
ꢎ
ꢎꢇ
ꢎꢇꢇ
ꢋ
J
K
L
ꢃ
ꢃꢇ
ꢃꢇꢇ
ꢍ
S
T
:
–
+
/
ꢉꢇꢇꢇꢇ
U
V
W
X
Y
Z
ꢈꢇ
ꢉꢇꢇꢇꢇꢇ
ꢉꢇꢇꢇꢇꢇꢇ
M
N
O
P
Q
R
ꢈꢇꢇ
ꢌ
ꢋꢇ
ꢋꢇꢇ
ꢆ
ꢍꢇ
ꢍꢇꢇ
ꢄ
Note Symbols shown
above must be
ꢌꢇ
made in alpha
character mode
on the dial pad.
ꢌꢇꢇ
ꢉꢇꢇ
ꢆꢇ
ꢆꢇꢇ
ꢉꢇ
ꢄꢇ
Strata DK Electronic Telephone 5/00
87
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
There are three basic LCD message functions:
o
Advisory messaging enables you to store an informative message for LCD
telephones that call your phone.
o
Silent messaging enables you to write a message that you can send to busy LCD
telephones. Silent messaging lets you communicate visually to someone who is
occupied on the telephone.
o
Notifications enable you to send your station number and message indication to
another LCD station. Responding to the message, the called station receives your
message.
There are two types of messages—station and system.
System Messages 60~64
System messages 60~64 are standard messages. You can “fill in the blanks” of
messages 62~64 (see below). Example: Message 64 can be edited to read RETURN ON
JAN. 4. This message is displayed to callers with LCD phones.
System Message
Number
Preprogrammed message
(Max. 32 digits per message)
60
61
62
63
64
OUT TO LUNCH
IN A MEETING
CALL _____________
BACK AT __________
RETURN ON________
System Messages 65~99
System messages 65~99 can only be programmed or permanently changed at the
Administrator’s telephone. Any messages programmed at Administrator’s telephone
remain in memory until canceled from Administrator’s telephone or until the system is
reinitialized.
88
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
Station Messages
You can create up to 10 station messages (10~19). Once entered, a message can never
be deleted; only overwritten. This is a station option that is enabled in system
programming.
o To enter/store a station message
1. Press /&'ꢁ0
The LCD M or [PDN] LED
flashes.
MSG NO. ?
...or [PDN] + ꢂꢍꢈ.
message number
The current message, if any, is displayed.
(10~19) to be stored.
3. Enter the message.
The LCD M or [PDN] LED lights, and the message
displays. The message is now stored in system
memory.
(See “To enter LCD
characters” on Page
86.)
4. Repeat Steps 1~3 for
any additional
messages you want to
store.
5. Press /&'ꢁ0
The message displays on your LCD as an Advisory
Message (see below). To cancel the message display,
press [PDN] and dial ꢂꢍꢈ or press /&'ꢁ0.
...or 63ꢅ5.
o To set an advisory message for incoming calls
1. Press /&'ꢁ0
The LCD M or [PDN] LED
flashes.
MSG NO. ?
...or a [PDN] + ꢂꢍꢈ.
Strata DK Electronic Telephone 5/00
89
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
2. Enter the desired
The selected message
displays. This assumes the
message has already been
stored in memory.
message number:
MSG NO. 10
ꢉꢇ~ꢉꢌ (station)
...or ꢍꢇ~ꢌꢌ (system)
3. Press /&'ꢁ0
The message displays on your LCD. The LCD M
[PDN] LED lights continuously. The selected message
is sent to LCD phones when they call your [PDN] or
any [PhDN] owned by the telephone.
...or 63ꢅ5.
4. Press 3$*( to
display the message
instead of the CF
display if you have
Call Forward set.
o To cancel an advisory message that has been set at your station
o Press /&'ꢁ0
The LED goes out. If a station message was sent, this
procedure does not erase it.
...or [PDN] + ꢂꢍꢈꢁ+
63ꢅ5.
o To set an advisory station message for a remote station
1. Press 02'( + ꢌꢃ
while your telephone
is idle.
MODE 95
DEST EKT NO.?
2. Dial the destination
[PDN].
207 = the destination [PDN]
MODE 95 DEST EKT
EKT NO. 207
3. Press 3$*(.
MW TO ST123
MSG NO?
90
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
4. Enter the message
number (station
ꢉꢇaꢉꢌ; system
ꢍꢇaꢌꢌ).
This assumes the message is
already stored in memory.
MW TO STXXX
MSG NO?10
5. Press 3$*(.
6. Press 02'(.
7. Press ꢇ.
Remote calling station
messaging allows you to set
a calling station message for
only one station at a time.
207 = the [PDN] where the
message is to appear.
010 = the message number.
CALL 207-010M
Called Station
M
= message is set.
Your LCD shows the time
and date. The message is
displayed at station 207.
LCD telephones calling
station 207 receives the
message.
SENT 207
Your Station
Message Notification
With an LCD telephone, you can set short messages (up to 32 characters) that display
to callers with LCD telephones. Any station can record a message; however, only
stations with an LCD are able to see the stored messages.
Notification Station Messaging
Your station number and a message indication can be sent to another LCD station.
When that station responds, it receives the message.
1. Press [PDN] and dial Station does not answer or is busy.
the station DN.
2. Press 02'( + ꢆ.
MW TO STXXX
MSG NO.?
Strata DK Electronic Telephone 5/00
91
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
3. Enter the message
Station message (10~19), system message (60~99).
The LCD displays the message. This assumes the
message has already been stored in memory.
number.
4. Press 06*ꢁ:.
MSG W LED flashes on the
called station and the LCD
CALL 204-207M
displays:
Called Station
204 = the called [DN]
207 = the [PDN] of the
station that sent the message
M = message has been sent.
Your LCD displays:
SENT 204
204 = the called [DN]
SENT = message has been
Your LCD
sent.
5. Press 63ꢅ5 or hang
up to release.
o To receive a notification station message
o Press 06*ꢁ: when the LED flashes.
o To cancel the message from the telephone that has the message set
o Press [PDN] and dial XXX is the [PDN] of the telephone that has the
ꢂꢍꢆ;;;.
message set.
92
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
Group Notification Station Messaging
This feature enables a station to set a Called Station Message for a group of stations.
1. Press 02'( + ꢌꢆ.
Prompted for the destination
number.
MODE 94
DEST EKT NO.?
2. Dial the destination
[DN]
Station groups correspond
to the same stations that are
in respective Page groups
assigned in system
MODE 94
DEST EKT NO. 207
...or press ꢂꢋꢇ for all
call page stations,
programming.
...or enter a group
code (ꢂꢋꢉ~ꢂꢋꢈ).
207=destination [DN] or
group number.
ꢂꢋꢉ~ꢂꢋꢈ for Page Group
1~8 respectively.
3. Press 3$*(.
MODE 94
ORG EKT NO.?
4. Dial the originating
[PDN].
This can be your number or
another station number.
MODE 94
ORG EKT NO. XXX
5. Press 3$*(.
MSG NO.?
6. Enter the message
number (station
ꢉꢇ~ꢉꢌ; system,
ꢍꢇ~ꢌꢌ).
The LCD displays the
message. In this example,
system message 60 was
entered. This assumes the
message is already stored in
memory.
OUT TO LUNCH
Strata DK Electronic Telephone 5/00
93
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
7. Press 3$*(.
MSG NO.?
8. Press 02'(.
MODE NO.?
9. Press ꢇ.
At the destination station,
the LCD displays the
originating station number
and the 06*ꢁ: LED
flashes.
SENT 207M
o To receive a notification message
o Press 06*ꢁ:.
o To cancel the message from the telephone that has the message set
o Press [PDN] and dial XXX is the [PDN] of the telephone that has the
ꢂꢍꢆ;;;. message set.
Silent Messaging (Busy Station)
An audible tone and an LCD message can be sent to an LCD station that is busy. The
busy station can return a message to the calling station LCD. The two stations may
continue this procedure to carry on a “silent” conversation.
1. Press 02'( + ꢎ
when you receive a
busy tone.
The called number is
displayed, 210=[DN], and
you are prompted for the
message number.
OVER TO ST210
MSG NO?
94
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Messages
2. Enter the message
number.
Station message (10~19)
and system message
(60~99). The LCD displays
the message. This assumes
the message is already
stored in memory.
3. Press 3$*(.
The destination station
beeps four times and the
message displays for 30
seconds or until you hang
up.
Your LCD confirms the
message was sent.
MSG SENT
o To return to a busy station message after receiving a busy station message
1. Press 02'( + ꢎ.
You are prompted for the
message number.
OVR TO ST210
MSG NO?
2. Enter the message
number.
Station message (10~19) and system message (60~99).
The LCD displays the message. This assumes the
message is already stored in memory.
3. Press 3$*(.
Your LCD confirms the
message was sent.
MSG SENT
Strata DK Electronic Telephone 5/00
95
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Memos
Memos
Speed Dial Memos
You can store names (12 characters maximum) for each of 40 station speed dial
station must be enabled via system programming for LCD message memory.
o To program Speed Dial names and numbers
1. Press 5'/ (or ꢂ),
then 6'6 (or ).
ꢁꢀ
2. Dial a station speed
dial code.
See Table 14 on Page 110
for speed dial codes.
# * 10 SPEED DIAL
3. Press 02'(.
If a name was previously
stored on this code, it
appears on the top line.
*10 NAME
SPEED DIAL
4. Enter the name or
memo (12 characters
maximum).
The name appears on the bottom line as you enter it.
(See “To enter LCD characters” on Page 86.)
5. Press 02'(.
6. Enter a phone number The number displays on the top line as you enter it.
(16 characters
maximum).
7. Press 5'/ (or ꢂ) to
record data in
memory.
o To display the SD number and memo
o Press 02'( +
X~X is the speed dial number to be displayed.
ꢈ;a;.
96
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Memos
o To dial a SD number
1. Press 02'( + ꢈ
when your phone is
idle.
2. Enter Station Speed
Dial Code
SPEED DIAL NO. 10
...or System Speed
Dial Code.
3. Press 3$*( to see
more of the directory
of numbers/memos.
4. Press an available &2 The number is dialed.
...or [DN] and enter a
CO Line access code.
o To check a SD number
1. Press 02'( + ꢈ
when phone is idle.
MODE NO.? 8
2. Dial a speed dial
number.
TOSHIBA is the memo (up to
12 characters).
*11 TOSHIBA
7145553700
714 583 3700 is the number
(up to 16 digits).
3. Press 3$*( to scan
the directory for the
appropriate number/
memo.
If the number is longer than 16 digits, a “+” appears in
the far right corner of the display.
4. Press 6&5/ to
display any remaining
digits.
Strata DK Electronic Telephone 5/00
97
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Name/Number Display
Timed Reminders
See “Timed Reminders” on Page 69.
Name/Number Display
This feature enables you to enter a name/title, telephone number, location, etc. in
system memory. This name/title (e.g., LOBBY) displays on your LCD while it is idle,
and on other station LCDs when you call them or they call you.
Name display information for non-LCD telephones or voice mail/auto attendant
devices may be entered by the System Administrator for display on other stations
LCDs when called.
When this feature is set, your Name/Number displays during direct, forwarded, and
hunted calls. The name/number is not displayed on overridden or OCA calls.
o To enter name/number information
1. Press [DN] + ꢂꢍꢎꢉ.
You are prompted for your
name.
USER NAME ?
2. Enter the new
characters can be
entered, e.g., your
name and station
number). See “To
enter LCD
characters” on Page
86.
3. Press 63ꢅ5.
The information is stored
and appears on the top line
of your station LCD.
TOSHIBA EXT. 200
DATE DAY TIME
98
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Name/Number Display
When you call a station, the
name/title displays on the
bottom of the called station
LCD.
NO. 213
TOSHIBA EXT. 200
o To clear name/number display
1. Press [DN] + ꢂꢍꢎꢇ.
You hear confirmation tone, then busy tone.
2. Press 63ꢅ5.
During the clear, the
NO. 213
message on the right is
USER NAME RESET
displayed.
After the clear, a name is
displaced by message and
call forward settings if they
are set.
NO. 213
DATE DAY TIME
Note This procedure does not erase the name/
number. To restore the display, press [DN] +
ꢂꢍꢎꢉ.
o To erase name/number display
1. Press [DN] + ꢂꢍꢎꢉ.
Current information
USER NAME ?
displays on the lower line of
the LCD. You are asked for
the user name.
2. Press ꢉ in the alpha
Blank characters replace the information.
mode to enter blanks.
3. Press 63ꢅ5.
The information is erased and the [PDN] of the
telephone is displayed.
Strata DK Electronic Telephone 5/00
99
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Operation
Name/Number Display
100
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
4
This chapter provides an overview of the Direct Station Selection (DSS) Console that
is available for system operators who do not have an attendant console. It describes
the features buttons and their associated LEDs. It applies to the DSS Console models
HDSS2060 (see Table 10 on Page 102), HDSS1060, and HDSS6560.
The DSS Console operates alongside of a electronic telephone to provide the
telephone with 60 additional feature buttons. The buttons can be programmed for:
o
&2 Line access
$OOꢁ&DOOꢁ3DJH
1LJKWꢁ7UDQVIHU
o
o
o
6WDWLRQ and/or 6\VWHPꢁ6SHHGꢁ'LDO
LEDs on the HDSS2060, HDSS1060, and HDSS6560 models light or flash red. For
the HDSS2060 and HDSS1060 models, the CO and [DSS] LEDs act in the same
manner as the electronic telephone and other LEDs on both of these models is red
when activated.
Strata DK Electronic Telephone 5/00
101
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
[DSS] Buttons
Notes
The button numbers
o
shown in this figure
are examples only
and may not reflect
the numbers on your
particular station
equipment.
209
208
207
206
205
204
203
202
201
200
219
218
217
216
215
214
213
212
211
210
229
228
227
226
225
224
223
221
221
220
239
238
237
236
235
234
233
232
231
230
249
248
247
246
245
244
243
242
241
240
NT
AC
257
256
255
254
253
252
251
250
o
Not available on
DK14 systems.
2039
[DSS] Buttons
Each [DSS] button is associated with a particular station in your telephone system. It
can be used to transfer an outside call to the associated station or to make a direct call
to the associated station. The [DSS] LED lights steady red when the station associated
with the [DSS] is ringing, busy on a call, or in the DND mode. When the associated
station is idle, but all appearances of the station [PDNs] are busy or in-use by other
stations, the [DSS] LED lights steady red.
Note [DSS] buttons cannot call stations [PhDNs], Distributed Hunt Groups [DNs],
or ACD Groups.
102
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
Features
Features
The LED color indications described here apply to DSS Console models HDSS2060
and HDSS1060. Flash conditions described here apply to all DSS Console models.
Calling a Station
To call a station [PDN] from a DSS Console, press the [DSS] associated with the
station. A station call with a [DSS] button can be made on-hook or off-hook and with
Voice First or Tone signaling. After pressing the button, treat the call like any other
station call made from a electronic telephone.
[DSS] LEDs show if the associated station is idle or busy. The LED is steady red if the
station is busy or ringing, and is not lit if idle. If all the station’s PDN buttons are
being used by other stations, the [DSS] LED of the station lights steady red, but the
station may be idle. If the station is in the DND mode, its [DSS] LED lights steady
red.
Transferring a Call
You can transfer internal or outside calls to an idle station from a DSS Console. You
can transfer a call to a busy station from your DSS Console. Use [DSS] to transfer the
call, even though the [DSS] LED for the station you are transferring to is red.
o To transfer a call to an idle station
1. Press the [DSS]
button associated
with the called
station.
The call is automatically placed on hold. The CO or
[DN] LED flashes at double the on-hold rate, and the
[DSS] LED flashes.
You hear a single-ring tone. If using the tone signaling
mode, you hear successive ring tones.
2. Announce the call.
3. Hang up.
With tone signaling, you have to wait for the called
station to answer before announcing the call.
The call rings the called station when you hang up.
While the called station is ringing, the [DSS] LED is
steady red, and the CO LED flashes at the on-hold rate
or if on a [DN] button, it goes idle.
Strata DK Electronic Telephone 5/00
103
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
Features
When the called station answers the call, the [DSS]
LED stays steady red, and the CO LED becomes
steady red.
If the station does not answer before a period set in
system programming, the call recalls your station.
o To transfer call with camp-on to a busy station
1. Press [DSS] You may hear a busy tone. The original caller is
corresponding to the
busy station.
placed automatically on hold. The CO or [DN] LED
flashes at double the on-hold rate, and the [DSS] LED
remains steady red.
2. Hang up.
The call rings the called station once with the camp-on
tone. While the called station is receiving this tone, the
CO LED on your telephone flashes (on-hold rate) or if
you are on a [DN] button, it goes idle. The [DSS] LED
remains steady red.
When the called station answers the transferred call,
the CO LED becomes steady red. The [DSS] LED
remains steady red.
Note If the busy station is in the DND mode, the
call is not transferred, but recalls your
telephone immediately.
If the call is not answered after a specified recall time
set in system programming, camp-on is cancelled and
the transferred call rings back.
Answering a (CO Line)
If your DSS Console is equipped with a &2 button, you can answer CO Line calls
from the console as you would from a electronic telephone. See Chapter 2 – Features,
beginning on Page 61 for detailed information.
o Press the flashing &2.
104
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
Features
Speed Dial
Your DSS Console may be equipped with 6' buttons that can be programmed to dial
telephone numbers or to access features. 6' buttons on the console function like 6'
detailed information.
Paging
You can make an announcement page to a group of station telephone speakers selected
in system programming with $& on the DSS Console. 6' (if programmed) can be
used for page announcements. See “All Call Voice Page” on Page 22.
Call Forward Override
Either the [DSS] buttons on your DSS Console or the dial pad on the associated
telephone can be set in system programming to ring stations that are in the Call
Forward mode instead of being forwarded. Usually the console’s telephone is the unit
activated to perform this function. This feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
Important! DSS buttons cannot override Call Forward.
o To override call forward with your DSS associated telephone
1. Press &21)ꢀ7516
or [PDN].
2. Dial the station
number set for call
forward.
Make the call as you would from any other station.
This procedure assumes your station has a typical
program setting.
o To override call forward with your DSS Console
o Press the station [DSS] set for call forward.
Night Transfer
You can use the DSS Console to make the system ring different telephones for
incoming calls during different times of the day. See the Strata DK System
Administrator Guide for more information on Night Transfer.
Strata DK Electronic Telephone 5/00
105
Download from Www.Somanuals.com. All Manuals Search And Download.
DSS Console
Features
106
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
A
This appendix contains access codes for outside Speed Dial (SD) numbers, CO lines,
Paging Group and Paging Zone Codes.
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a
&2 button, you can enter the appropriate code listed in Table 11 on Page 108 to access
an outside line.
You can also store the code on a 6' button for one-touch access. If you are storing a
CO Line access code onto a Speed Dial code, enter ꢆꢆ before the CO access code
(e.g., to store code ꢂꢄꢇꢇꢉ, enter ꢆꢆꢄꢇꢇꢉ).
In some systems, ꢌ is used as a general group code or to access Least Cost Routing
(LCR). System users are required to dial ꢌ in order to access an outside line. If you
press ꢌ in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
o To access a line
o Press [PDN] + CO Line Access Code.
Strata DK Electronic Telephone 5/00
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Feature Access Codes
Table 11
CO Line Access Codes
System
CO Line Access Codes
ꢌꢁRUꢁꢈꢇꢉaꢈꢇꢆꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢇꢇꢆ
ꢌꢁRUꢁꢈꢇꢉaꢈꢇꢈꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢇꢇꢈ
ꢌꢁRUꢁꢈꢇꢉaꢈꢇꢈꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢇꢉꢎ
ꢌꢁRUꢁꢈꢇꢉaꢈꢇꢈꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢇꢉꢍ
DK14
DK16, DK16e
DK40, DK40i
DK424 (RCTUA)
DK424 (RCTUBA/BB) and
DK424i (B1CU)
ꢌꢁRUꢁꢈꢇꢉaꢈꢇꢈꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢇꢆꢈ
ꢌꢁRUꢁꢈꢇꢉaꢈꢉꢍꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢉꢆꢆ
ꢌꢁRUꢁꢈꢇꢉaꢈꢉꢍꢁRUꢁꢂꢄꢇꢇꢉaꢂꢄꢎꢇꢇ
DK424 (RCTUC/D) and
DK424i (B2CAU/B2CBU)
(B3CAU/B3CBU)
DK424 (RCTUE/F) and
DK424i (B5CAU/B5CBU)
Notes
o
o
o
ꢌꢁaccesses LCR or general line group.
ꢂꢄꢇꢇꢉaꢂꢄꢎꢇꢇ accesses individual lines 1~200, respectively.
Feature Access Codes
See Table 12 on Page 109.
Paging Access Codes
Your telephone can be assigned to page groups. Telephones can be a member of more
than one group and each group can have as many as 120 stations. Station users can
access each group separately by dialing an access code (see Tables 12~13 on Page
109).
108
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Paging Access Codes
o To enter a paging group access code
o Press [PDN] + Access Code.
Table 12
Paging Groups
Paging Group
Access Code
ꢂꢋꢉꢉ
Paging Group
Station Group E
Station Group F
Station Group G
Station Group H
Access Code
ꢂꢋꢉꢃ
Station Group A
Station Group B
Station Group C
Station Group D
ꢂꢋꢉꢎ
ꢂꢋꢉꢍ
ꢂꢋꢉꢋ
ꢂꢋꢉꢄ
ꢂꢋꢉꢆ
ꢂꢋꢉꢈ
Table 13
External Paging Zones
Access Code
External Paging Zone
External Paging Zone
Access Code
DK14, DK40, DK40i, DK424, DK424i (all processors)
Paging
ꢂꢆꢄ
Paging All Call,
External Page Zone
ꢂꢆꢇ
All Call Page Zone
DK40, DK40i, DK424 (RCTUA, RCTUBA/BB, RCTUC/D), and
DK424i (B1CU, B2CAU/B2CBU, B3CAU/B3CBU)
Zone A
Zone B
ꢂꢆꢈ
ꢂꢆꢃ
Zone C
Zone D
ꢂꢆꢉ
ꢂꢆꢊ
DK424 (RCTUE/F) and DK424i (B5CAU/B5CBU)
Zone A
Zone B
Zone C
Zone D
ꢂꢆꢈꢅ
ꢂꢆꢈꢋ
ꢂꢆꢈꢆ
ꢂꢆꢈꢌ
Zone E
Zone F
Zone G
Zone H
ꢂꢆꢈꢈ
ꢂꢆꢈꢃ
ꢂꢆꢈꢉ
ꢂꢆꢈꢊ
Strata DK Electronic Telephone 5/00
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Codes
Speed Dial Access Codes
Speed Dial Access Codes
The number of station and system speed dial numbers available to you depends on the
size of your company’s telephone system. Check with your System Administrator to
find out which codes apply to your system.
Once you store a telephone number on any of the codes listed below, you can dial the
ꢀꢉꢇ or 6' + ꢉꢇ.
number by entering the code, such as
Table 14
Speed Dial Access Codes
Station
Speed Dial Codes
System
Speed Dial Codes
Telephone System Size
Small System
(DK14, DK16, DK16e, DK40, DK40i, RCTUA)
ꢅꢄaꢌꢇ
ꢅꢄaꢌꢇ
ꢃꢄaꢇꢇ
Medium System
(RCTUBA/BB and RCTUC/D, B1CU,
B2CAU/B2CBU and B3CAU/B3CBU)
ꢃꢄꢄaꢃꢇꢇ
ꢋꢄꢄaꢇꢇꢇ
Large System
(RCTUE/F and B5CAU/B5CBU)
ꢅꢄꢄaꢅꢆꢇ
Table 15
System Speed Dial Number Linking
System Speed Dial Codes that can be linked to
other Speed Dial Codes
System
DK14, DK16, DK16e, DK40, DK40i, RCTUA
ꢇꢄaꢇꢇ
RCTUBA/BB, RCTUC/D, B1CU,
B2CAU/B2CBU and B3CAU/B3CBU
ꢃꢇꢄaꢃꢇꢇ
ꢇꢇꢄaꢇꢇꢇ
RCTUE/F and B5CAU/B5CBU
110
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Centrex Application
B
Your system may be equipped with the Centrex Application, which enhances its
feature capability when installed behind a Centrex or PBX system.Your telephone
may have access to one or more of the enhanced Centrex features listed below.
Flexible Directory Numbering
A station [PDN] can be three or four digits. It is, therefore, possible to match a station
[PDN] and Centrex line extension number. Dial the entire station number when
indicated.
Note Some access code numbers may have been changed to avoid system
numbering plan conflicts.
Centrex Feature Buttons
You can access some Centrex features by pressing a preprogrammed flexible button
on your telephone, instead of dialing a Centrex access code. The Centrex access code,
including the necessary flash and/or pause sequence, is activated when the button is
pressed. See your Centrex or PBX operations manual for specific details.
Strata DK Electronic Telephone 5/00
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Centrex Application
Ringing Repeat
Ringing Repeat
The distinctive ring patterns available in your Centrex system are automatically
repeated with your electronic telephone enabling you to answer appropriately for
either outside, inside or callback calls.
Delayed Ringing
CO or Centrex line(s) can be programmed for a 12-second and/or 24-second ring
delay at stations to permit alternate answering conditions. Answer the line when your
telephone is ringing.
112
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
C
Flexible Buttons
All flexible buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your System Administrator for button assignments.
Table 16
Flexible Button Labels
Button Label
Definitions
Automatic Busy Redial Button
$%5
Press to set up Automatic Busy Redial after receiving a busy tone on a
dialed CO line call (not available on tie or DID CO lines).
All Call Voice Page Button
$&
$&%
Press to page all of the digital and electronic telephones in the All Call
Page group.
Automatic Callback Button
Press to recall a busy station or station in the Do Not Disturb (DND)
mode as soon as that station becomes idle or deactivates DND. Also
used for CO line queuing.
Account Code Button
$&&17
Press to enter a Voluntary Account Code anytime during a Central Office
(CO) line call without interrupting the conversation.
Strata DK Electronic Telephone 5/00
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
Flexible Buttons
Table 16
Flexible Button Labels (continued)
Button Label
Definitions
Alert Signaling Buttons
Press to alert with a distinctive sound and to indicate a pre-arranged
meaning and visual indication to a predesignated station. Up to four
Alert Signal buttons can be assigned to a telephone.
$/(57ꢁꢍꢅaꢌꢎ
Alarm Reset Button
$/50
Press to turn off a telephone alarm connected to a facility alarm
mechanism.
Background Music Button
Press to turn Background Music ON or OFF over your station speaker.
%*0
Call Forward-All Calls Button
Press to forward all calls to another station or voice mail device.
&)$&
Call Forward-Busy Button
&)%
Press to forward calls immediately to another station or voice mail
device when your station is busy or in the DND mode.
Call Forward-Busy/No Answer Button
Press to forward calls immediately to another station or voice mail
device when your station is busy or in DND mode. Also forwards calls
when your station is not answered after 8~60 seconds (set at your
station).
&)%ꢏ1$
Call Forward-No Answer Button
&)1$
&)ꢐ(;7
&))
Press to forward calls to another station or voice mail device when your
station is not answered after 8~60 seconds (set at your station).
Call Forward-External Button
Press to forward Private or DID line calls to an external or internal
telephone number.
Call Forward-Fixed Button
Press to forward all calls to a station or voice mail device assigned in
system programming.
Line Button
&2
Press to answer or access an outside Central Office (CO) line.
Conference/Transfer Button
Press to set up conference and transfer calls.
&21)ꢏ7516
Park Orbit Display Button - LCD Telephones Only
Press to display call(s) parked in orbit. If there are multiple parked calls,
a + sign appears on the LCD.
&3'
114
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
Flexible Buttons
Table 16
Flexible Button Labels (continued)
Button Label
Definitions
Park/Page Button
&3ꢏ3*
>'1@
Press to park internal or outside call in orbit and announce to other
telephones or paging speakers to retrieve the parked calls.
Directory Number Button
Press to answer a call to the Directory Number [DN] or to initiate a
phone call. The [DN] is also known as an Extension Number or Intercom
Number. You can have multiple [DN] buttons on your telephone,
including DNs belonging to another telephone [SDN]. See “Directory
Button Definitions” on Page 6 for more information.
Do Not Disturb Button
Press to lock your station in or out of the DND mode.
'1'
Door Lock Buttons
Press to unlock a door lock mechanism.
'5/,ꢁꢍꢄaꢌꢎ
Direct Station Selection Button(s)
Press to ring a preselected station. The LED associated with each DSS
button provides the status (idle/busy) of the station assigned to the
button.
'66
Flash Button
Press to perform the following functions: Disconnect and recall dial tone
on a CO line; access Centrex or PBX features; enter a pause or flash
signal when programming speed dial numbers.
)/$6+
Group Pickup Button
*53ꢏ3,83
+2/'
Press to pick up a call that is ringing a station that belongs to a Pickup
Group that your station is a member of.
Hold Button (Fixed)
Press to hold internal or outside calls.
Message Select Button
/&'ꢁ0
Press to allow system and personal messages to be displayed on the
optional 32-character Liquid Crystal Display (LCD).
Unanswered (Lost) Call Automatic Dial Button
Press to automatically dial the stored ANI (Automatic Number
Identification) or Caller ID number shown on the LCD. Unanswered calls
will be stored on this button and on the LCD.
/&$'
Strata DK Electronic Telephone 5/00
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
Flexible Buttons
Table 16
Flexible Button Labels (continued)
Button Label
Definitions
Microphone Cutoff Button
Press to turn the microphone off/on while idle, providing privacy when
you receive handsfree internal calls. Also functional when your station
receives calls—the Mic button controls the microphone when you
originate calls.
0&2
Microphone Button (Fixed)
Press to turn the microphone off/on while telephone is in use.
0,&
Modem Button
Press to reserve a modem from a pool. The LED of the button indicates
the status of the modem pool. See the Strata DK PC/Data Interface User
Guide.
02'(0
Additional Message Waiting Buttons
Phantom Directory Numbers allow multiple Message Waiting buttons
with LED indications for up to four different Directory Numbers [DNs]
other than your Primary Directory Number [PDN]. It performs the same
Message Waiting functions as the MW/FL button.
06*ꢁ:
0:ꢏ)/
Message Waiting/Flash Button
The MW/FL LED flashes to indicate that a message is waiting. Press the
MW/FL button to call back the station or voice mail device that activated
the LED. This button performs the following functions: Disconnect and
recall dial tone on a CO line; access Centrex or PBX features; enter a
pause or flash signal when programming speed dial numbers.
Night Transfer Button
17
Press to control the system’s CO line ringing pattern for after-hours
incoming calls.
Tenant Night Transfer Buttons
Press the appropriate button to control the system’s CO line ringing
patterns for after hours incoming calls for either of the tenants that share
a single Strata DK system.
17ꢁꢍꢅaꢌꢎ
17ꢁ/ꢁꢍꢅaꢌꢎ
3$5,
Night Transfer Lock Buttons
Initiates entry of the NT Lock password. NT L LED will be on when the
system ring mode (Day/Day2/Night) is locked.
Park Button
Press to park internal or outside calls in an orbit. Call retrieval can be
made locally from the same parking telephone or remotely from a
different telephone.
116
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
Flexible Buttons
Table 16
Flexible Button Labels (continued)
Button Label
Definitions
Pause (Long) Button
3$8ꢏ/
3$8
Press to insert a 10-second pause when programming Speed Dial
numbers.
Pause Button
Press to set either a one-half or two-second pause when programming
Speed Dial numbers. (The pause time is set in system programming).
Primary Directory Number Button
Press to answer a call to the [PDN] or to initiate a phone call. The [PDN]
is your Extension Number or Intercom Number. Your telephone can
have up to four [PDN] buttons with your number. See “Directory Button
Definitions” on Page 6 for more information.
>3'1@
Phantom Directory Number Button
Up to eight [PhDN]s can be dedicated to a station or shared by a group
of stations.See “Directory Button Definitions” on Page 6 for more
information.
>3K'1@
Call Pickup Button
Press to initiate a Directed Call Pickup of CO line, [DN], and page calls.
3,83
Tenant Call Pickup Buttons
3,83ꢁꢍꢅaꢌꢎ
If the system is shared by tenants, the Directed Pickup 1~4 buttons pick
up ringing CO line calls for Tenants 1~4 respectively.
Pooled Line Button
3/
Press to access an available CO line from a group of lines appearing
under one button.
Privacy Button
35,9
Press to block Privacy Override on common CO line buttons. This
button does not block Busy Override or Executive Override.
Privacy Release Button
Press to release privacy on common CO line buttons, enabling other
station users to enter your conversations on those buttons. Privacy
release does not apply to common [DN] buttons which are always
private.
359ꢁ5/6
5'/
Redial Button
Press to have the system redial the last telephone number you dialed or
begin to store a speed dial number. If RDL is not programmed on your
telephone, you can substitute the # key for any of its referenced
procedures.
Strata DK Electronic Telephone 5/00
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Labels
Flexible Buttons
Table 16
Flexible Button Labels (continued)
Button Label
Definitions
Release and Answer Button
Press to disconnect or complete the transfer the current CO or [DN] call
and automatically answer the new incoming CO or [DN] call.
Operational for Pooled Lines, [DN], and CO line buttons.
5/6ꢏ$16
Release Button
5/6
Press to disconnect or complete the transfer of the current CO or [DN]
call and to place your station in the idle condition.
Save Button
After dialing an outside or internal directory number, press to “save” the
number. Later, you can have the system automatically redial the number
for you when you press the button after accessing an internal or outside
line.
6$9(
Speed Dial Button
Press to Speed Dial a telephone number or feature access codes. SD
buttons can be used as either System Speed Dial numbers or Station
Speed Dial numbers.
6'
Speed Dial Select Button
Press to store and access Speed Dial number. If SDS is not
programmed on your telephone, you can substitute the * key for any of
its referenced procedures.
6'6
Speaker Button (Fixed)
Press to turn the speaker on and off. This button also selects a line or an
internal [PDN] if programmed for auto preference in system
programming. Also used to disconnect on-hook speakerphone calls.
63,5
Start Button
67$57
68%
Press to make an outgoing call using an ISDN trunk.
Subaddress Button
Press to enter a subaddress on an ISDN trunk outgoing call.
Tone Button
721(
Press to change the outgoing dialing of the CO line in use from dial
pulse to tone signaling.
118
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
about this book
button labels, 113
buttons, 3
conventions, viii
organization, viii
ABR, 21
ACB, 23
access codes
[DSS], 102
CO line, 107
[PhDN], 6
[SDN], 6
feature, 63
speed dial, 110
using, 25
account code
calls, 18
forced account codes (verified/non-
verified), 18
alert signaling, 20
HOLD, 3
ANI/Caller ID, 82
LCD, 8
MODE, 79
PAGE, 80
RING, 4
SCRL, 80
SPKR, 4
attendant console calling, 20
auto dial lost calls, 84
automatic busy redial, 21
automatic callback, 23
automatic hold, 24
VOL, 4
Strata DK Electronic Telephone 5/00
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
C ~ H
[DSS] button, 102
C
call forward, 25
all calls, 26
busy⁄no answer, 28
external, 30
fixed, 30
no answer, 27
call park
orbit list display, 84
orbits, 32
call pickup, 35
features, 103
call transfer, 37
with camp-on, 37
override), 105
calling a station, 103
call waiting, 38
called station messaging, 91
caller ID/ANI/DNIS information mode, 82
centrex application, 111
CO line access codes, 107
CONF/TRNS, 3
conference calls, 39
transfer to an idle station, 103
forced account codes (verified/non-
control buttons, 79
D
date
time⁄day adjustment, 39
delayed ringing, 112
directory number, 5
DISA
internal calls, 40
outgoing calls, 40
DNIS, 82
do not disturb (DND), 42
do not disturb override, 56
door lock, 43
group listening, 46
group pickup, 36
calls to other groups, 36
calls within your group, 36
H
handsfree answerback, 47
door phone, 43
120
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
handsfree monitoring, 47
HOLD, 3
hotline service
station, 89
I
incoming DISA calls, 40
indicators
N
LED, 10
ISDN
buttons, 16, 48, 118
feature codes, 64
outgoing calling, 48
off-hook, 11
on-hook, 11
override
L
LCD, 7
buttons, 8
operation, 79
telephones, 25
incoming calls, 17
LED indicators, 10
liquid crystal display (LCD), 7
lost calls
busy, 56
do not disturb, 56
executive, 56
P
retrieve and auto dial, 84
phantom directory number, 6
primary directory number, 6
privacy
M
memo, 96
speed dial, 96
timed reminders, 98
message
on-line, 58
called station, 91
group called station, 93
silent (busy station), 94
override, 57
Strata DK Electronic Telephone 5/00
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Q ~ V
supervision, 72
Q
quick reference, 15
U
R
release and answer, 59
remote destination change, 31
retrieve and auto dial lost calls, 84
ringing repeat, 112
volume, 4
S
saved number redial, 60
scroll button, 80
secondary directory number, 6
silent messaging (busy station), 94
speakerphone, 60
speed dial, 61
access codes, 110
number linking, 66
pause and flash storage, 66
long pause, 66
memos, 96
pause, 66
SPKR, 4
SP-OCA, 54
sub (subaddress ISDN button), 48
T
timed reminders, 69
tone⁄pulse dialing, 70
two (tandem) CO line connection, 70
[DN], 70
122
Strata DK Electronic Telephone 5/00
Download from Www.Somanuals.com. All Manuals Search And Download.
|