Toshiba TV DVD Combo MD20Q41 User Manual

Introduction  
Connections  
Basic setup  
2
DIGITAL VIDEO  
13  
18  
20  
28  
31  
39  
45  
COMBINATION COLOR  
TELEVISION AND DVD  
VIDEO PLAYER  
TV operation  
Basic playback  
MD13Q41  
MD20Q41  
OWNER’S MANUAL  
Advanced playback  
Function setup  
Others  
Illustration of MD20Q41  
©2005 Toshiba Corporation  
Before operating the unit, please read this manual thoroughly.  
5R80101D [E] (Cover)  
1
2/24/05, 10:11 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
Installation, Care, and Service  
Installation  
Follow these recommendations and precautions and heed  
all warnings when installing your TV:  
4) Follow all instructions.  
16) Never modify this equipment. Changes or  
modifications may void: a) the warranty, and b) the  
user’s authority to operate this equipment under the  
rules of the Federal Communications Commission.  
5) Do not use this apparatus near  
water.  
17)  
DANGER: RISK OF SERIOUS PERSONAL  
INJURY, DEATH, OR EQUIPMENT  
DAMAGE! Never place the TV on  
6) Clean only with a dry cloth.  
7) Do not block any ventilation  
openings. Install in accordance with  
the manufacturer’s instructions.  
an unstable cart, stand, or table. The TV  
may fall, causing serious personal injury,  
death, or serious damage to the TV.  
8) Do not install near any heat  
sources such as radiators, heat  
18) Never place or store the TV in direct  
sunlight; hot, humid areas; areas  
subject to excessive dust or vibration;  
or locations with temperatures at or  
below 41°F (5°C).  
registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized  
or grounding type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third  
19) Always place the TV on the floor  
or a sturdy, level, stable surface that  
can support the weight of the unit.  
Wide plug  
prong are provided for your safety.  
If the provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10) Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and  
the point where it exits the apparatus.  
20) Never place items such as vases,  
aquariums, or candles on top of the TV.  
11) Only use attachments/accessories specified by  
21) Never block or cover the slots or  
openings in the TV cabinet back,  
bottom, and sides. Never place  
the TV:  
the manufacturer.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer, or sold with the  
on a bed, sofa, rug, or similar  
surface;  
apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
too close to drapes, curtains,  
or walls; or  
in a confined space such as a  
bookcase, built-in cabinet, or any  
other place with poor ventilation.  
13) Unplug this apparatus during  
lightning storms or when unused  
for long periods of time.  
The slots and openings are provided  
to protect the TV from overheating  
and to help maintain reliable  
operation of the TV.  
14) Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as  
power supply cord or plug is damaged,  
22) Never allow anything to rest on or roll over the power  
cord, and never place the TV where the power cord is  
subject to wear or abuse.  
liquid has been spilled or objects have  
fallen into the apparatus, the apparatus  
QUALIFIED  
has been exposed to rain or moisture, does  
SERVICE  
TECHNICIAN  
not operate normally, or has been dropped.  
15)  
CAUTION: To reduce the risk of electric  
shock, do not use the polarized plug  
23) Never overload wall outlets and  
extension cords.  
with an extension cord, receptacle, or other  
outlet unless the blades can be inserted  
completely to prevent blade exposure.  
0303  
3
5R80101D [E] (P02-05)  
3
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
IMPORTANT SAFEGUARDS  
S
30) [This item applies to projection TVs only.] If the air  
temperature rises suddenly (for example, when the TV  
is first delivered), condensation may form on the  
lenses. This can make the picture appear distorted or  
the color appear faded. If this happens, turn off the TV  
for 6 to 7 hours to allow the condensation to evaporate.  
24) Always operate this equipment from  
a 120V AC, 60 Hz power source only.  
25) Always make sure the antenna system is properly  
grounded to provide adequate protection against  
voltage surges and built-up static charges (see Section  
810 of the National Electric Code).  
31) For added protection of your TV from lightning and  
power surges, always unplug the power cord and  
disconnect the antenna from the TV if you leave the TV  
unattended or unused for long periods of time.  
Antenna lead-in wire  
32) During normal use, the TV may make  
occasional snapping or popping  
Antenna discharge unit  
(NEC Section 810-20)  
Ground clamp  
sounds. This is normal, especially  
when the unit is being turned on or  
off. If these sounds become frequent  
or continuous, unplug the power cord  
and contact a Toshiba Authorized Service Center.  
Grounding conductors  
(NEC Section 810-21)  
Electric service equipment  
Power service grounding  
electrode system (NEC Art 250 Part H)  
Ground clamps  
33) Possible Adverse Effects on TV Picture Tube: If a  
fixed (non-moving) pattern remains on the TV screen  
for long periods of time, the image can become  
permanently ingrained in the picture tube and cause  
subtle but permanent ghost images. This type of  
damage is NOT COVERED BY YOUR WARRANTY.  
Never leave your TV on for long periods of time while it  
is displaying the following formats or images:  
26)  
DANGER: RISK OF SERIOUS  
PERSONAL INJURY OR DEATH!  
Use extreme care to make sure you  
are never in a position where your body (or any item  
you are in contact with, such as a ladder or  
screwdriver) can accidentally touch overhead power  
lines. Never locate the antenna near overhead power  
lines or other electrical circuits.  
Never attempt to install any of the following during  
lightning activity:  
• Fixed Images, such as PIP/POP windows, stock  
tickers, video game patterns, TV station logos, closed  
captions, and websites.  
• Special Formats that do not use the entire screen.  
For example, viewing letterbox style (16:9) media on a  
normal (4:3) display (gray bars at top and bottom of  
screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (gray bars on left and right  
sides of screen).  
a) an antenna system; or b) cables, wires, or any home  
theater component connected to an antenna or phone  
system.  
Care  
For better performance and safer operation of your  
TOSHIBA TV, follow these recommendations and  
precautions:  
Service  
34)  
WARNING: RISK OF ELECTRIC  
SHOCK! Never attempt to service the  
TV yourself. Opening and  
27) Always sit approximately 1025 feet away from the TV  
and as directly in front of it as possible. The picture can  
appear dull if you sit too far to the left or right of the  
TV, or if sunlight or room lights reflect on the screen.  
Turn the TV off to check for reflections on the screen,  
and then remove the source of reflections while  
viewing the TV.  
removing the covers may expose  
you to dangerous voltage or other  
hazards. Refer all servicing to a  
Toshiba Authorized Service Center.  
QUALIFIED  
SERVICE  
TECHNICIAN  
35) If you have the TV serviced:  
Ask the service technician to use only replacement  
parts specified by the manufacturer.  
28) Always unplug the TV before  
cleaning. Never use liquid or  
aerosol cleaners.  
Upon completion of service, ask  
the service technician to perform  
routine safety checks to determine  
that the TV is in safe operating  
condition.  
36) When the TV reaches the end of its useful life, ask a  
qualified service technician to properly dispose of the  
TV. Improper disposal may result in a picture tube  
implosion and possible personal injury.  
29)  
WARNING: RISK OF ELECTRIC SHOCK!  
Never spill liquids or push objects of any  
kind into the TV cabinet slots.  
0303  
4
5R80101D [E] (P02-05)  
4
2/24/05, 2:01 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTION/ Power source  
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the interference by one  
or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the distance between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the  
FCC (Federal Communications Commission) Rules could void the user's authority to operate this  
equipment.  
COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the event  
that third party copyrights and other rights are not violated.  
Location of the required Marking  
CAUTION:  
The rating sheet and the safety caution  
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.  
are on the rear of the unit.  
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ  
THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FU-  
TURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE-  
NANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.  
USE OF CONTROLS, ADJUSTMENTS ORTHE PERFORMANCE  
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT  
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION  
CERTIFICATION: COMPLIES WITH  
MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO  
FDA RADIATION PERFORMANCE  
NOT STARE INTO BEAM.  
STANDARDS, 21 CFR SUBCHAPTER J.  
WARNING: This product contains a laser beam. Do not attempt to stare at the beam through the DVD disc tray  
or the ventilation openings. Staring directly at the beam may cause permanent damage to your  
eyesight.  
IMPORTANT RECYCLING INFORMATION  
This product uses both Cathode Ray Tube (CRT) and other components that contain lead. In your  
community there might be regulations that require you to dispose these materials  
properly under environmental considerations. Please contact your local authorities, or the Electronic  
Power source  
TO USE AC POWER SOURCE  
AC Outlet  
Use the AC polarized line cord provided for operation on AC. Insert the AC  
cord plug into a standard 120V 60Hz polarized AC outlet.  
Wider Hole  
and Blade  
Notes:  
• Never connect the AC line cord plug to other than the specified voltage (120V  
60Hz). Use the attached power cord only.  
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not  
attempt to file or cut the blade. It is the user’s responsibility to have an  
electrician replace the obsolete outlet.  
• If you cause a static discharge when touching the unit and the unit fails to  
function, simply unplug the unit from the AC outlet and plug it back in. The  
unit should return to normal operation.  
• If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds  
before pressing the POWER button.  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
5
5R80101D [E] (P02-05)  
5
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Precautions  
Notes on handling  
Notes on moisture condensation  
3 When shipping the unit, the original shipping carton  
and packing materials come in handy. For maximum  
protection, repack the unit as it was originally packed  
at the factory.  
3 Do not use volatile liquids, such as insect spray, near  
the unit. Do not leave rubber or plastic products to  
contact the unit for prolonged period. They will leave  
marks on the finish.  
Moisture condensation damages the unit. Please  
read the following carefully.  
Moisture condensation occurs, for example, when you  
pour a cold drink into a glass on a warm day. Drops of  
water form on the outside of the glass. In the same way,  
moisture may condense on the optical pick-up lens  
inside this unit, one of the most crucial internal parts of  
the unit.  
3 The top and rear panels of the unit may become  
warm after a long period of use. This is not a  
malfunction.  
3 When the unit is not in use, be sure to remove the  
disc and turn off the power.  
3 If you do not use the unit for a long period, the unit  
may not function properly in the future. Turn on and  
use the unit occasionally.  
3 Moisture condensation occurs during the  
following cases.  
Notes on locating  
When you bring the unit directly from a cold place to  
a warm place.  
3 Place the unit on a level surface. Do not use it on a  
shaky or unstable surface such as a wobbling table or  
inclined stand. The loaded disc may become dis-  
aligned and damage the unit.  
3 When you place this unit near a TV, radio, or VCR,  
the playback picture may become poor and the sound  
may be distorted. In this case, place the unit away  
from the TV, radio, or VCR.  
When you use the unit in a room where you just  
turned on the heater, or a place where the cold wind  
from the air conditioner directly hits the unit.  
In summer, when you use the unit in a hot and humid  
place just after you move the unit from an air  
conditioned room.  
When you use the unit in a humid place.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
Use a dry cloth to wipe it dry.  
Do not use any type of solvent, such as thinner and  
benzine, as they may damage the surface of the unit.  
If you use a chemical saturated cloth to clean the unit,  
follow that product’s instructions.  
3 Do not use the unit when moisture condensation  
may occur.  
If you use the unit in such a situation, it may damage  
discs and internal parts. Remove the disc, connect  
the power cord of the unit to the wall outlet, turn on  
the unit, and leave it for two or three hours. After two  
or three hours, the unit will have warmed up and  
evaporated any moisture. Keep the unit connected to  
the wall outlet and moisture condensation will seldom  
occur.  
Wall outlet  
6
5R80101D [E] (P06-07)  
6
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on discs  
On handling discs  
Structure of disc contents  
Do not touch the playback side of the disc.  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. Video CDs and  
Audio CDs are divided into tracks.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
Video CD/Audio CD  
Video CD/Audio CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
Each title, chapter or track is assigned a number, which  
is called “title number”, “chapter number” or “track  
number” respectively.  
There may be discs that do not have these numbers.  
Notes on copyright  
The unauthorized recording, use, distribution, or  
revision of copyrighted materials including, without  
limitation, television programs, videotapes, and DVDs,  
is prohibited under the Copyright Laws of the United  
States and other countries, and may subject you to civil  
and criminal liability.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
On storing discs  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
7
5R80101D [E] (P06-07)  
7
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on discs (Continued)  
About this owner’s manual  
Playable discs  
This owner’s manual explains the basic instructions of  
this unit. Some DVD video discs are produced in a  
manner that allows specific or limited operation during  
playback. As such, the unit may not respond to all  
operating commands. This is not a defect in the unit.  
Refer to instruction notes of discs.  
This unit can play the following discs.  
Maximum  
Disc  
Disc Mark Contents  
playback time  
Size  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
Video  
(moving  
pictures)  
A “  
” may appear on the TV screen during operation.  
” means that the operation is not permitted by the  
Approx. 8 hours  
(double sided disc)  
DVD  
video  
discs  
unit or the disc.  
For example, sometimes it is unable to stop the  
playback of copyright message of the disc when the  
STOP (3) button is pressed. Alternatively, the “  
also indicate that the feature is not available for the disc.  
Approx. 80 minutes  
(single sided disc)  
8 cm  
” may  
Approx. 160 minutes  
(double sided disc)  
Notes on region numbers  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
Audio  
+
Video  
(moving  
pictures)  
The region number of this unit is 1. If region numbers,  
which stand for their playable area, are printed on your  
Video  
CDs  
ALL  
1
DVD video disc and you do not find  
or  
, disc  
DIGITAL VIDEO  
8 cm  
playback will not be allowed by the player. (In this case,  
the unit will display a message on-screen.)  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
On Video CDs  
Audio  
CDs  
Audio  
This DVD supports Video CDs equipped with the PBC  
(Version 2.0) function. (PBC is the abbreviation of  
Playback Control.) You can enjoy two playback  
variations depending on types of discs.  
8 cm  
(CD  
single)  
The following discs are also available.  
DVD-R/RW discs of DVD video format  
• Video CD not equipped with PBC function  
(Version 1.1)  
Sound and movie can be played on this DVD in the  
CD-R/CD-RW discs of CD-DA, Video CD or JPEG  
format  
same way as an audio CD.  
• Video CD equipped with PBC function  
(Version 2.0)  
Kodak Picture CD and FUJICOLOR CD format  
Some of these discs may be incompatible.  
You cannot play discs other than those listed above.  
You cannot play discs of DVD-RAM, DVD-ROM, Photo  
CD, etc., or non standardized discs even if they may  
be labeled as above.  
Some CD-R/RWs can not be played back depending  
on the recording conditions.  
In addition to operation of a Video CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owner’s  
manual may not work with some discs.  
• This unit uses the NTSC color system, and cannot  
play DVD video discs recorded in any other color  
system (PAL, SECAM, etc.).  
Because of problems and errors that can occur during the  
creation of DVD software and/or the manufacture of DVD  
discs, Toshiba cannot guarantee that this player will play  
every feature of every DVD bearing the DVD logo. As one  
of the creators of DVD technology, Toshiba DVD players are  
manufactured using the highest standards of quality, and as  
a result, such incompatibilities are rare. If you happen to  
experience any difficulty playing a DVD on a Toshiba DVD  
player, please feel free to call our Contact listed in “How to  
Obtain Warranty Service” (see page 51).  
8
5R80101D [E] (P08-12)  
8
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Advanced playback  
Introduction  
Zooming ......................................................... 31  
Locating desired scene .................................. 31  
Marking desired scenes ................................. 32  
Repeat playback............................................. 33  
A-B Repeat playback...................................... 33  
Program playback .......................................... 34  
Random playback........................................... 34  
Changing angles ............................................ 35  
Title selection ................................................. 35  
DVD menu...................................................... 35  
Changing soundtrack language ..................... 36  
Subtitles ......................................................... 36  
Disc status...................................................... 37  
To turn off the PBC ........................................ 37  
JPEG playback............................................... 38  
IMPORTANT SAFEGUARDS ............................2  
SAFETY PRECAUTION....................................5  
Precautions .......................................................6  
Notes on discs...................................................7  
Contents ............................................................9  
Identification of controls ..................................10  
Connections  
Antenna connections.......................................13  
Cable TV connections .....................................14  
Connecting to optional equipment...................15  
Basic setup  
Starting setup ..................................................18  
Setting the language .......................................19  
Function setup  
Customizing the function settings .................. 39  
Temporary disabling of rating level  
TV operation  
TV operation....................................................20  
Closed captions...............................................22  
To memorize channels ....................................23  
Setting the V-Chip ...........................................24  
Picture control adjustment...............................26  
Adjusting the picture preference .....................26  
Stereo and Second Audio Program (SAP) ......27  
by DVD disc ................................................... 44  
Others  
Language code list ......................................... 45  
Troubleshooting ............................................. 46  
Reception disturbances.................................. 48  
Specifications ................................................. 49  
Limited United States Warranty ..................... 50  
Basic playback  
Playing a disc ..................................................28  
9
5R80101D [E] (P08-12)  
9
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of controls  
See the page in  
for details.  
Front  
Illustration of MD20Q41  
POWER indicator 20  
POWER button 18  
AUDIO (L/R)/VIDEO IN jacks (LINE)  
15  
STOP ( ) button  
28  
Disc tray  
28  
SKIP (  
PLAY ( ) button 28  
CHANNEL ( / ) buttons  
/
) buttons 30  
Remote sensor  
12  
PHONES jack 21  
OPEN/CLOSE ( ) button  
28  
21  
VOLUME ( / ) buttons 20  
Rear  
Illustration of MD20Q41  
COAXIAL DIGITAL AUDIO OUT jack  
16  
AC power cord  
RF IN jack  
13  
10  
5R80101D [E] (P08-12)  
10  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
The instructions in this manual describe the function on the remote control. See the page in  
for details.  
OPEN/CLOSE button 28  
POWER button  
18  
TV/DVD button  
28  
SLEEP button 21  
Direct channel  
selection buttons (0-9)  
Number buttons (0-9)  
20  
31  
21  
21  
DISPLAY button  
JUMP button 31  
CH  
/
buttons  
VOL +/  
-
buttons  
20  
SUBTITLE button 36  
AUDIO SELECT button  
27 36  
INPUT button 15  
MUTE button  
21  
ZOOM button 31  
DVD MENU button  
35  
PLAY MODE button 33  
ENTER button  
18  
(
)
Direction buttons  
/
/
/
18  
MENU button  
SETUP button  
19  
39  
CANCEL button  
18  
PLAY button  
PAUSE button  
CH RTN button  
28  
29  
21  
STOP button  
28  
CLOSED CAPTION button  
22  
SKIP  
button 30  
button  
30  
SKIP  
FF button  
30  
REV button  
30  
30  
35  
SLOW  
button  
SLOW  
button  
30  
32  
ANGLE button  
MARKER button  
TOP MENU button  
35  
GAME button  
15  
REPEAT A  
-B button  
33  
RETURN button 39  
*DVD MENU button  
Use the DVD MENU button to  
display the menu included on  
many DVD video discs.  
To operate a menu, follow the  
35  
instructions in “DVD menu.”  
11  
5R80101D [E] (P08-12)  
11  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Identification of controls (Continued)  
Inserting batteries  
Open the battery compart-  
ment cover in the direction of  
the arrow.  
Install two “R03/AAA” batter-  
Replace the compartment  
cover.  
1
2
3
ies (supplied), paying attention  
to the polarity diagram in the  
battery compartment.  
Operation  
• Aim the remote control at the remote sensor and press control buttons to operate.  
• Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5  
meters.  
Illustration of MD20Q41  
Approx. 5 meters  
Caution:  
Never throw batteries into a fire.  
Notes:  
Be sure to use AAA size batteries.  
Dispose of batteries in a designated disposal area.  
Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accord-  
ance with applicable laws and regulations.  
If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries  
with new ones.  
When necessary to replace batteries in the remote control, always replace both batteries with new ones.  
Never mix battery types or use new and used batteries in combination.  
Always remove batteries from remote control if they are dead or if the remote control is not to be used for an  
extended period of time. This will prevent battery acid from leaking into the battery compartment.  
12  
5R80101D [E] (P08-12)  
12  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If  
you are using a cable TV service (CABLE), see page 14 for Cable TV connections.  
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)  
Connect the 75 ohm cable from the combination  
VHF/UHF antenna to the antenna jack.  
Antenna  
jack  
Antenna  
jack  
If your combination VHF/UHF antenna has a 300  
ohm twin-lead wire, the use of the 300-75 ohm  
matching transformer may be necessary.  
75 ohm coaxial cable  
(not supplied)  
300-75 ohm matching  
transformer (supplied)  
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)  
Connect the UHF 300 ohm twin-lead wire to the  
Antenna  
300-75 ohm matching  
transformer (supplied)  
combiner (not supplied). Connect the VHF 300  
ohm twin-lead wire to the 300-75 ohm matching  
transformer.Attachthetransformertothecombiner,  
then attach the combiner to the antenna jack.  
jack  
Combiner  
(not supplied)  
UHF 300 ohm  
twin-lead wire  
(not supplied)  
VHF 300 ohm  
twin-lead wire  
(not supplied)  
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
twin-lead wire to the combiner (not supplied).  
Attach the combiner to the antenna jack.  
Antenna  
jack  
VHF 75 ohm  
(not supplied)  
Combiner  
(not supplied)  
UHF 300 ohm  
twin-lead wire  
(not supplied)  
13  
5R80101D [E] (P13-23)  
13  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Cable TV connections  
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box.  
Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for  
normal viewing requires the use of a descrambler device which is generally provided by the cable company.  
For subscribers to basic cable TV service  
Antenna  
jack  
For basic cable service not requiring a converter/descrambler  
box, connect the Cable TV 75 ohm coaxial cable directly to the  
Antenna jack on the back of the TV/DVD.  
75 ohm  
coaxial cable  
For subscribers to scrambled cable TV service  
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the  
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect  
the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections  
shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)  
and use the converter/descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Antenna  
jack  
75 ohm cable  
to TV/DVD  
Converter/  
descrambler  
For subscribers to unscrambled basic cable TV service with scrambled  
premium channels  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the  
cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”  
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune  
your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/  
descrambler box to tune scrambled channels.  
Converter/  
Incoming  
descrambler  
Antenna  
75 ohm  
Cable TV  
75 ohm cable  
to TV/DVD  
jack  
A
A/B switch  
Splitter  
B
14  
5R80101D [E] (P13-23)  
14  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to optional equipment  
You can enjoy VCR, camcorder or TV game with connection to external  
input. To select the external input, press INPUT and select “LINE” mode.  
INPUT  
GAME  
To connect the TV/DVD to a VCR  
Press the INPUT to select the “LINE” (external input) to use the TV as a monitor.  
Operate your VCR as usual.  
VCR  
Front of TV/DVD  
: Signal flow  
VIDEO IN  
AUDIO IN (R)  
AUDIO IN (L)  
To Audio/Video OUT  
Audio/Video cable (not supplied)  
To connect the TV/DVD to a camcorder  
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.  
Front of TV/DVD  
Camcorder  
: Signal flow  
VIDEO IN  
AUDIO IN (R)  
AUDIO IN (L)  
To Audio/Video OUT  
Audio/Video cable (not supplied)  
To connect the TV/DVD to a TV Game  
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.  
1. Connect a TV Game to the TV/DVD.  
2. Press GAME. The GAME mode screen appears.  
• This TV/DVD has the GAME mode function (see page 21).  
Front of TV/DVD  
: Signal flow  
VIDEO IN  
AUDIO IN (R)  
To Audio/Video OUT  
AUDIO IN (L)  
Audio/Video cable (not supplied)  
Notes:  
• You can also change the TV screen to LINE by pressing the CH  
/
buttons.  
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different  
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included  
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional  
information.  
• The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials,  
is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or  
criminal liability.  
15  
5R80101D [E] (P13-23)  
15  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to optional equipment (Continued)  
This section uses the following reference mark.  
You can enjoy high quality dynamic sounds by connecting the  
TV/DVD to optional audio equipment.  
*
: Front speaker  
: Rear speaker  
: Sub woofer  
: Center speaker  
: Signal flow  
Connecting to an amplifier equipped with a Dolby Digital decoder  
Dolby Digital  
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to  
reproduce this realistic effect in the home.You can enjoy motion picture and live concert DVD video discs encoded via the  
Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier  
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will  
obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as  
well as from titles with the Dolby Surround mark.  
Amplifier equipped with a  
• Use DVD video discs  
Dolby Digital decoder  
encoded via the Dolby  
Digital recording system.  
To COAXIAL  
type digital  
audio input  
Manufactured under license from  
Dolby Laboratories. “Dolby”, “Pro  
Logic”, and the double-D symbol  
are trademarks of Dolby Labora-  
tories.  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with Dolby Surround Pro Logic  
Dolby Surround Pro Logic  
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right  
and left front speakers, a center speaker, and one or two rear speakers).  
3 With an amplifier equipped with Dolby Digital  
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.”  
Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.  
3 With an amplifier not equipped with Dolby Digital  
Connect the equipment as follows.  
• This connection is only suitable for Video CDs and Audio CDs.  
*
Amplifier equipped with  
Dolby Surround Pro Logic  
Connect one or two rear speak-  
*
ers. The output sound from the  
rear speakers will be monaural  
even if you connect two rear  
speakers.  
To COAXIAL  
type digital  
audio input  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a DTS decoder  
Digital Theater Systems (DTS)  
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.  
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD  
video discs or audio CDs.  
Amplifier equipped with  
• Use DVD video discs  
a DTS decoder  
encoded via the Dolby  
Digital recording system.  
To COAXIAL  
type digital  
audio input  
“DTS” and “DTS Digital Out”  
are trademarks of Digital  
Theater Systems, Inc.  
75 coaxial cable (not supplied)  
16  
5R80101D [E] (P13-23)  
16  
2/24/05, 10:12 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with an MPEG2 audio decoder  
MPEG2 sound  
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic  
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.  
Amplifier equipped with an  
MPEG2 audio decoder  
To COAXIAL  
type digital  
audio input  
• Use DVD video discs  
encoded via the Dolby  
Digital recording system.  
75 coaxial cable (not supplied)  
Connecting to an amplifier equipped with a digital audio input  
2 channel digital stereo  
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input  
and speaker system (right and left front speakers).  
Amplifier equipped with a  
Digital audio input  
To COAXIAL  
type digital  
audio input  
75 coaxial cable (not supplied)  
Notes:  
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.  
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO  
OUT jack of the TV/DVD.  
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIALinput of a Receiver or Processor.  
• Refer to the owner’s manual of the connected equipment as well.  
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the  
wall outlet before making any connections.  
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate  
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.  
Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the  
speakers may be damaged.  
17  
5R80101D [E] (P13-23)  
17  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic setup  
POWER  
Starting setup  
The STARTING SETUP function makes installing your TV/DVD easily. It leads  
you the Language selection, TV/CABLE selection and auto channel memory  
automatically.  
/
IMPORTANT: Make sure that the antenna or cable TV system connection  
is made!  
ENTER  
CANCEL  
Starting setup  
Now the “AUTO CH MEMORY” starts.  
After the starting setup is completed, the TV  
channel appears on the screen.  
Press POWER.  
The starting setup function begins and the  
Language setup menu appears on the screen.  
4
1
Press  
or  
to select your desired  
language, then press ENTER.  
Note:  
If you press CANCEL in the process of “AUTO CH  
MEMORY” you can do starting set up function again.  
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
AUTO CH MEMORY  
STOP : CANCEL  
<
/
/ ENTER>  
Press  
or  
to select “TV” or “CABLE”, then  
press ENTER.  
2
3
Note:  
CHANNEL PLAN  
The starting setup function will work only when you press  
POWER for the first time.  
TV  
CABLE  
<
/
/ ENTER>  
Press  
or  
to select “START”, then press  
ENTER.  
If you select “CANCEL” and press ENTER, the  
STARTING SETUP stops and changes to the TV  
screen.  
AUTO SETUP  
START  
CANCEL  
<
/
/ ENTER>  
18  
5R80101D [E] (P13-23)  
18  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
This TV/DVD can display the on screen language in English, Spanish or French.  
Select the language you prefer first, then proceed with the other menu  
options.  
ENTER  
/
/
/
MENU  
Setting the language  
Press MENU, then press  
option.  
or  
to select  
1
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/MENU  
Press  
or  
to select the desired language:  
English (ENGLISH), Spanish (ESPAÑOL) or  
French (FRANCAIS), then press ENTER.  
2
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/
/ ENTER/MENU  
Press MENU repeatedly until the menu screen  
is cleared.  
3
Notes:  
If the unit does not operate properly, or No key operation  
(by the unit and/or the remote control): Static electricity,  
etc., may affect the player's operation. Disconnect the AC  
power cord once, then connect it again.  
• The TV section has its own menu and also DVD section has  
39  
its own menu  
.
19  
5R80101D [E] (P13-23)  
19  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
POWER  
0–9  
TV operation  
VOL +/–  
TV operation  
To turn on the TV/DVD, press POWER.  
The Power indicator will light.  
Press Direct channel selection buttons (0–9)  
to select the channel.  
4
1
2
TV mode direct channel selection  
When the TV/CABLE selection is in the TV position, all  
channels can be instantly selected by using two  
buttons. (for example, to  
select channel 2, press “0”,  
then “2”. If you press only “2”,  
channel selection will be  
delayed for a few seconds.)  
For channels 10 and above,  
press the 2 digits in order.  
Adjust the volume level by pressing VOL + or –.  
The volume level will be indicated on the  
screen by green bars. As the volume level  
increases, so do the number of bars. If the  
volume decreases, the number of green bars  
also decreases.  
CH 012  
CABLE mode direct channel selection  
When the TV/CABLE selection is in the CABLE  
position, channels can be selected as follows:  
TO SELECT CABLE TV CHANNELS:  
1-9:  
Press “0” twice, then 1-9 as needed.  
Example, to select channel 2, press  
002”.  
Press “0”, then the remaining 2 digits.  
Example, to select channel 12, press  
012”.  
VOLUME  
32  
10-12:  
Set the TV/CABLE selection to the appropriate  
position. (See page 23.)  
13-99:  
Press the 2 digits in order. Example, to  
select channel 36, press “36”.  
3
100-125: Press the 3 digits in order. Example, to  
select channel 120, press “120”.  
TV  
- VHF/UHF channels  
NOTE FOR CHANNELS 1-12:  
CABLE - Cable TV channels  
If only 1 or 2 buttons are pressed, the corresponding  
channel will be selected in 2 seconds.  
CABLE  
VHF  
2-13  
TV  
VHF  
2-13  
UHF  
14-69  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
(5A)  
Notes:  
• If a channel with no broadcast is selected, the sound will auto-  
matically be muted.  
• If a station being viewed stops broadcasting, the TV will auto-  
matically shut itself off after 15 minutes.  
20  
5R80101D [E] (P13-23)  
20  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SLEEP  
DISPLAY  
VOL +/–  
MUTE  
CH  
/
CH RTN  
GAME  
SLEEP  
CHANNEL UP/DOWN  
To set the TV/DVD to turn off after a preset amount of  
time, press SLEEP on the remote control. The clock  
will count down 10 minutes for each press of SLEEP  
(120, 110, ...10, 0). After the sleep time is programmed,  
the display will appear briefly every ten minutes to  
remind you that the sleep timer is operating. To confirm  
the sleep timer setting, press SLEEP and the remain-  
ing time will be displayed for a few seconds. To cancel  
the sleep timer, press SLEEP repeatedly until the  
display turns to 0.  
Press and release CH  
or . The channel automati-  
cally stops at the next channel set into memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See page 23 “To  
memorize channels”.  
SLEEP  
120  
DISPLAY  
Press DISPLAY to display the current informations on  
the screen. Press DISPLAY again to clear the display.  
• Channel number or external input mode  
• Stereo or SAP (Second Audio Program) audio status  
• Audio output status  
GAME MODE  
After connecting a TV Game to the unit, press GAME.  
The TV screen changes to the Game mode.  
• The Game mode screen is adjusted to the suitable  
brightness for your eyes.  
STEREO SAP  
CH 012  
• Game timer function: After one hour the Game timer  
display will appear every 30 minutes for approx. 5  
seconds showing how long the time has passed up  
to 4 hours.  
SEL. STEREO  
• If GAME is pressed during standby mode, the unit  
turns on automatically and the Game mode screen  
appears on the screen.  
CH RETURN  
This button allows you to go back to the last channel  
selected by pressing CH RTN. Press CH RTN again to  
return to the last channel you were watching.  
GAME  
HEADPHONES  
Insert a stereo headphones (not supplied) with a 1/8”  
mini plug into the PHONES jack on the front panel. If  
you connect headphones, the sound from TV speakers  
is muted.  
MUTE  
Press MUTE to switch off the sound. The TV/DVD’s  
sound will be silenced and “MUTE” will briefly appear on  
the screen. The sound can be switched back on by  
pressing this button again or one of VOL + /–.  
MUTE  
21  
5R80101D [E] (P13-23)  
21  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Closed captions  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display closed captioned  
television programs. Closed captioning will display text on the screen for  
hearing impaired viewers or it will translate and display text in another  
language.  
CLOSED  
CAPTION  
Closed captions  
Captions: This closed caption mode will display text on the screen in English or another language (depending on the  
setting of the closed captions CH 1/2).  
Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other languages  
are transmitted on captions channel 2.  
Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.  
After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.  
If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the signal is  
received again. If the channels are changed, the captions will be delayed approximately 10 seconds.The captions will  
appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen.  
News programs will usually show three-line closed captions which scroll onto the screen.  
Most other shows provide two or three lined captions placed near the character who is speaking so the viewer can  
follow the dialogue.Words in italics or underlined describe titles, words in foreign languages or words requiring empha-  
sis. Words that are sung usually appear enclosed by musical notes.  
For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol (CC).  
TO VIEW CLOSED CAPTIONS  
Press CLOSED CAPTION to switch between normal TV and the two closed caption  
modes (captions and full screen text). Closed captioning will display text on the screen  
for hearing impaired viewers.  
Notes:  
• When selecting closed captions, the captioning will be delayed approximately 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.  
• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning,  
especially with live programs.This is because during live programs, captions are also entered live.These transmissions do not  
allow time for editing.  
• When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed  
captions.  
• Some cable systems and copy protection systems may interfere with the closed captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with  
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.  
NOTICE OF POSSIBLE ADVERSE EFFECT ON TV PICTURE TUBE  
Avoid displaying stationary images on your TV screen for extended periods of time. Fixed (non-moving) images (such as  
still PIP/POP windows, black/gray bars in wide-screen or PIP/POP formats, stock tickers, video game patterns, TV station  
logos, closed captions, and websites) can become permanently ingrained in the picture tube. This type of damage is  
NOT COVERED BY YOUR WARRANTY.  
22  
5R80101D [E] (P13-23)  
22  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0–9  
To memorize channels  
This TV/DVD is equipped with a channel memory feature which allows  
channels to skip up or down to the next channel set into memory, skipping over  
unwanted channels. Before selecting channels, they must be programmed into  
the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/  
DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an  
antenna, set the TV/CABLE selection to the TV position. When shipped from  
the factory, this selection is in the CABLE position.  
/
/
/
MENU  
TV/CABLE selection  
Automatic memory tuning  
Press MENU in the TV mode, then press  
or  
Press  
or  
to select the “AUTO CH MEMORY”,  
to select  
option.  
then press  
.
1
The TV will begin memorizing all the channels  
available in your area.  
Press  
or  
to select “TV/CABLE”.  
2
3
To ADD/DELETE channels  
Press  
press  
or  
to select “ADD/DELETE”, then  
.
1
Press  
or  
to select “TV” or “CABLE”.  
TV - VHF/UHF channels  
CABLE - Cable TV channels  
Select the desired channel to be added or  
deleted using Direct channel selection buttons  
2
3
(0–9) or  
/
.
Press MENU repeatedly until the menu screen is  
cleared.  
4
Press  
or  
to select “ADD” or “DELETE”,  
whichever function you want to perform.  
Cable TV chart  
The chart below is typical of many cable system channel  
allocations.  
ADD  
CH 001  
0-9 /  
/
/
/
/
MENU  
23  
5R80101D [E] (P13-23)  
23  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Setting the V-Chip  
0–9  
An age limitation can be set to forbid children to watch programs according to  
“TV RATING” and “MOVIE RATING” level set. To use the V-Chip function,  
you must register a password.  
ENTER  
/
/
/
Notes:  
CANCEL  
• If you forget the password, you cannot set the V-Chip.  
To avoid forgetting the password, write it down and keep in  
the safe place.  
MENU  
To register password  
To change password  
In the V-CHIP menu, press  
“CHANGE PASSWORD”, then press  
or  
to select  
Press MENU, then press  
option.  
or  
to select  
.
1
1
V-CHIP SET  
V-CHIP  
OFF  
V-CHIP SET  
NEW  
CHANGE PASSWORD  
PASSWORD : – – – –  
/
/
/
/ MENU  
/
/
/ MENU  
Press  
or  
to select “PASSWORD”.  
Enter the new password using Number buttons  
(0–9), then press ENTER.  
2
3
2
3
4
V-CHIP SET  
NEW  
PASSWORD : – – – –  
CHANGE PASSWORD  
NEW  
0
9/ENTER/CANCEL/MENU  
PASSWORD  
: – – – –  
Enter the password (4 digits) using Number  
buttons (0–9), then press ENTER.  
If you put a wrong number, press CANCEL.  
0-9/ENTER/CANCEL/MENU  
Enter the same password again using Number  
buttons (0–9) for safety, then press ENTER.  
V-CHIP SET  
NEW  
CHANGE PASSWORD  
CONFIRM  
PASSWORD  
:
PASSWORD  
:
0–  
9/ENTER/CANCEL/MENU  
0-9/ENTER/CANCEL/MENU  
“ ” appears instead of the number.  
Enter the same password again using Number  
buttons (0–9) for safety, then press ENTER.  
Now the password was registered and V-Chip  
setting menu will appear on the display.  
Press MENU repeatedly until the menu screen  
is cleared.  
4
V-CHIP SET  
CONFIRM  
PASSWORD  
:
0–  
9/ENTER/CANCEL/MENU  
24  
5R80101D [E] (P24-27)  
24  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY  
ENTER  
/
/
/
MENU  
To set the V-Chip  
Press  
or  
to select desired rating.  
In the V-CHIP menu, press  
or  
to select  
After setting, press ENTER.  
“V-CHIP SET”, then press  
.
4
1
V-CHIP SET  
TV-Y  
PG-13  
TV RATING  
MOVIE RATING  
V-CHIP  
V-CHIP SET  
CHANGE PASSWORD  
OFF  
/
/
/
/ ENTER/MENU  
/
/
/ MENU  
OFF : MOVIE RATING is not set  
Press  
press or  
After setting, press ENTER.  
or  
to select “TV RATING”, then  
to display the desired setting.  
G
: All ages  
2
3
PG  
: Parental guidance  
PG-13 : Parental guidance less than 13 years old  
R
: Under 17 years old Parental guidance  
suggested  
NC-17 : 17 years old and above  
V-CHIP SET  
TV RATING  
MOVIE RATING  
X
: Adult only  
TV-Y  
OFF  
Press  
or to select “V-CHIP”.  
5
6
/
/
/
/ ENTER/MENU  
V-CHIP  
V-CHIP SET  
CHANGE PASSWORD  
OFF  
OFF : TV RATING is not set  
TV-Y : All children  
TV-Y7 : 7 years old and above  
TV-G : General audience  
TV-PG : Parental guidance  
TV-14 : 14 years old and above  
TV-MA: 17 years old and above  
/
/
/
/ MENU  
Press  
or  
to display “ON”.  
Now your settings were set into the memory.  
When you select TV- Y7, TV-PG, TV-14 or TV-MA,  
press DISPLAY to show the contained rating.  
Press  
/
or  
/
to select the desired item you  
V-CHIP  
V-CHIP SET  
CHANGE PASSWORD  
ON  
want.  
Press  
or  
to select “MOVIE RATING”.  
/
/
/
/ MENU  
Press MENU repeatedly until the menu screen is  
cleared.  
V-CHIP SET  
TV RATING  
MOVIE RATING  
7
TV-Y  
OFF  
To use after the TV is protected  
When the program applied to the V-Chip setting is received,  
/
/
/
/ ENTER/MENU  
enter the password, then press ENTER. Protection can be  
canceled.  
Note:  
The V-Chip function is activated only on programs that have  
the rating signal.  
25  
5R80101D [E] (P24-27)  
25  
2/24/05, 10:13 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
Picture control adjustment/  
Adjusting the picture preference  
ENTER  
Picture controls are factory preset but you can adjust them individually as follows:  
And also you can select four picture modes—Standard, Sports, Movie, and  
Memory—as described in the following table:  
/
/
/
CANCEL  
MENU  
Picture control adjustment  
Adjusting the picture preference  
Press MENU, then press  
option.  
or  
to select  
Press MENU, then press  
option.  
or  
to select  
1
1
2
PICTURE  
PICTURE PREFERENCE  
PICTURE  
PICTURE PREFERENCE  
Press  
.
or  
to select “PICTURE”, then press  
/
/
/
/ MENU  
Press  
or  
to select “PICTURE  
PREFERENCE”, then press  
.
2
PICTURE  
PICTURE PREFERENCE  
PICTURE  
PICTURE PREFERENCE  
/
/
/ MENU  
Press  
adjust, then press  
or  
to select the item you want to  
or to adjust the setting.  
/
/
/ MENU  
3
Press  
or  
to select the desired picture  
mode, then press ENTER.  
3
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
0
+32  
0
0
0
PICTURE PREFERENCE  
STANDARD  
SPORTS  
MOVIE  
/
/
/
/ CANCEL / MENU  
MEMORY  
Selection  
Pressing  
/
/ ENTER / MENU  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
darker  
lower  
paler  
reddish  
softer  
lighter  
higher  
deeper  
greenish  
sharper  
Mode  
Picture quality  
STANDARD Standard picture quality (factory-set)  
SPORTS  
MOVIE  
Bright and dynamic picture (factory-set)  
Movie-like picture setting (factory-set)  
Your personal preferences (set by you;  
see “Picture control adjustment” as left)  
Note:  
MEMORY  
The CONTRAST default setting is set to maximum  
(+32) at the factory.  
After your desired setting press MENU  
repeatedly until the menu screen is cleared.  
After your desired setting press MENU  
repeatedly until the menu screen is cleared.  
4
4
Note:  
3 To return all adjustments to the factory preset levels  
You cannot select “PICTURE PREFERENCE” in the Game  
mode.  
26 Press CANCEL while making picture adjustments.  
5R80101D [E] (P24-27)  
26  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stereo and Second Audio Program (SAP)  
The TV/DVD is equipped with a feature known as multi-channel TV sound or  
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs  
with high fidelity stereo sound.  
AUDIO SELECT  
MTS also provides an extra channel called the Second Audio Program or SAP  
which broadcasters can use to transmit a second language for bilingual transmis-  
sion or for other purposes.  
Listening to stereo sound  
To select desired sound  
When the TV is turned on or a channel selection is  
made, make certain the “STEREO” appears on the  
screen. This means that Stereo broadcasting is  
available. You can enjoy stereo sound from the left  
and right speakers.  
Press AUDIO SELECT to select the desired sound.  
When mono broadcasting is received, no indication is  
displayed.  
If the broadcast signal is not strong enough or clear  
stereo sound is not available, press AUDIO SELECT to  
change to mono sound. The noise should be elimi-  
nated. Press it again to return to the stereo sound.  
SEL. STEREO  
MONO + SAP BROADCASTING  
MONO SOUND  
SAP SOUND  
(MAIN)  
STEREO  
CH 013  
STEREO+SAP BROADCASTING  
STEREO SOUND  
SAP SOUND  
(MAIN)  
MONO SOUND  
(MAIN)  
Listening to SAP (Second Audio Program)  
When the TV is turned on or a channel selection is  
made, make certain the SAP appears on the screen.  
This means that the Second Audio Program broad-  
casting is available.  
STEREO SAP  
CH 013  
27  
5R80101D [E] (P24-27)  
27  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Playing a disc  
This section shows you the basics on how to play a disc.  
CAUTION  
Keep your fingers well clear of the disc tray as it is closing.  
Neglecting to do so may cause serious personal injury.  
Illustration of MD20Q41  
1 3,5  
5
6 4  
DVD  
VCD  
CD  
Basic playback  
Preparations:  
• Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time,  
you need to set “Starting setup” 18  
.
• When connecting to other equipment, turn power off.  
Press OPEN/CLOSE or PLAY.  
Press POWER on the unit or on the remote control  
to turn on the unit.  
The Power indicator will light.  
• Every time you press POWER, theTV/DVD starts from  
TV mode.  
• When using an amplifier, switch on the amplifier.  
1
5
6
The disc tray closes automatically.  
On the TV-screen, “ ” changes to  
“Reading” and then playback  
commences.  
OR  
Reading  
Press TV/DVD to select DVD mode.  
The DVD startup screen will appear on the screen.  
“Reading” display will change to “No Disc”. (If DVD  
disc has already loaded, playback will start automati-  
2
cally.)  
Reading  
• A menu screen will appear on the TV screen, if  
the disc has a menu feature.  
Press C/D or B/A to select title, then press ENTER.  
Title is selected and play commences.  
Press STOP to end playback.  
Press OPEN/CLOSE.  
3Resuming facility  
• The unit records the stopped point,  
The disc tray opens.  
3
depending on the disc. “  
appears on the screen. Press  
PLAY to resume playback (from  
the scene point).  
• If you press STOP again or unload  
the disc (“3” appears on the  
screen.), the unit will clear the  
stopped point.  
Place the disc on the disc tray.  
4
3 To start playback in the stop mode  
Press PLAY.  
With the playback  
side down  
Note:  
• There are two different disc sizes. Place the disc in  
the correct guide on the disc tray. If the disc is out of  
the guide, it may damage the disc and cause the unit  
to malfunction.  
If the unit does not operate properly:  
Static electricity, etc., may affect the player's operation. Discon-  
nect the AC power cord once, then connect it again.  
• Do not place a disc which is unplayable on the disc tray.  
28  
5R80101D [E] (P28-31)  
28  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV/DVD  
POWER  
To obtain a higher quality picture  
Occasionally, some picture noise not usually visible during a normal broadcast  
may appear on the TV screen while playing a DVD video disc because the high  
resolution pictures on these discs include a lot of information. While the amount of  
noise depends on the TV you use with this unit, you should generally reduce the  
sharpness adjustment on your TV when viewing DVD video discs.  
OPEN/CLOSE  
PAUSE  
DVD VCD  
CD  
About  
The  
DVD VCD  
CD  
icons on the heading bar show the playable discs for the  
STOP  
PLAY  
function described under that heading.  
: You can use this function with DVD video discs.  
: You can use this function with Video CDs.  
: You can use this function with Audio CDs and CD-R/RW CDs.  
VCD  
CD  
To remove the disc  
Press OPEN/CLOSE.  
To pause playback (still mode)  
Press PAUSE during playback.  
Remove the disc after the disc tray  
opens completely.  
To resume normal playback, press  
PLAY.  
• The sound is muted during still  
mode.  
To stop playback  
Press STOP.  
Be sure to press OPEN/CLOSE to close the disc tray  
after you remove the disc.  
Notes:  
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen  
according to the type of loaded disc. In this case, check your disc again (see pages 8 and 43).  
• Some discs may take a minute or so to start playback.  
• When you set a single-faced disc label downwards (ie. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,  
“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.  
Some discs may not work the resuming facility.  
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 37.  
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according  
to the disc contents the software producers designed, some playback features may not be available. Also refer to the  
instructions supplied with the DVDs.  
• Do not move the unit during playback. Doing so may damage the disc.  
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit  
to malfunction.  
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to  
malfunction.  
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen  
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press  
POWER on your remote control once the movie is completed.  
• There may be a slight delay between you pressing the button and the function activating.  
29  
5R80101D [E] (P28-31)  
29  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic playback  
Playing a disc (continued)  
PAUSE  
PLAY  
FF  
SKIP  
SLOW  
REV  
/
/
DVD  
VCD  
CD  
Playing in fast reverse or fast forward directions  
To resume normal playback  
Press PLAY.  
Press REV or FF during playback.  
PLAY  
REV: Fast reverse playback  
FF: Fast forward playback  
Notes:  
Each time you press REV or FF, the  
• The TV/DVD mutes sound and subtitles during reverse and  
forward scan of DVD/VCD video discs. However, the TV/DVD  
plays sound during fast forward or fast reverse play of audio  
CDs.  
playback speed changes.  
• The playback speed may differ depending on the disc.  
DVD  
VCD  
Playing frame by frame  
To resume normal playback  
Press PLAY.  
Press PAUSE during still playback.  
Each time you press PAUSE, the  
picture advances one frame.  
Note:  
The sound is muted during frame by frame playback.  
DVD  
VCD  
Playing in slow-motion  
To resume normal playback  
Press PLAY.  
Press SLOW  
during playback.  
(REVERSE) or  
(FORWARD)  
Each time you press the button, the  
slow-motion speed changes.  
Notes:  
• The sound is muted during slow-motion playback.  
• The Video CD cannot play Reverse Slow.  
DVD  
VCD  
CD  
Locating a chapter or track  
Press SKIP  
or  
repeatedly to display the chapter or track number you want.  
Playback starts from the selected chapter or track.  
To locate succeeding chapters or  
tracks.  
Playback starts from the beginning of  
the current chapter or track.  
Note:  
When you press twice in quick successions,  
playback starts from the beginning of  
the preceding chapter or track.  
Press and hold SKIP on the unit during playback to play forward or in reverse.  
Afterwards, each time you press and hold SKIP, the playback speed will change.  
Notes:  
• A prohibition symbol “  
may appear at the upper left of the screen. This symbol means either the feature you tried is not  
available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.  
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave  
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent  
damage to your television screen. Projection televisions are very susceptible.  
30  
5R80101D [E] (P28-31)  
30  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
DISPLAY  
0–9  
Zooming/Locating desired scene  
JUMP  
ZOOM  
/
/
/
CANCEL  
ENTER  
DVD  
VCD  
CD  
DVD  
VCD  
CD  
Zooming  
Locating desired scene  
This unit will allow you to zoom in on the frame image. You Use the title, chapter and time recorded on the DVD disc to  
can then make selections by switching the position of the locate the desired point to play back. In the case of VCD/CD  
frame.  
discs, time and track are used to locate the desired point to  
play back.  
To check the title, chapter and time, press DISPLAY.  
Press ZOOM during playback.  
1
The center part of the image will be  
zoomed in.  
Each press of ZOOM will change the  
Press JUMP during playback or stop mode.  
1
ZOOM 1 (x 1.3), 2 (x 1.5) and  
3
Time  
/
Title  
Chapter  
/6  
/
(x 2.0).  
/Enter/0 9/Cancel/Jump  
1
• “Time” only works in playback or  
resume stop mode.  
Press  
or  
to select the “Time”, “Title” or  
“Chapter”.  
2
3
Press  
/
/
/
to view a different part of the  
Time  
Title  
Chapter  
/
frame.  
2
/6  
/
You may move the frame from the  
center position to UP, DOWN, LEFT  
or RIGHT direction.  
/Enter/0 9/Cancel/Jump  
Press Number buttons (0–9) to change the  
number.  
In the zoom mode press ZOOM repeatedly to  
return to a 1:1 view ( Off).  
Time  
Title  
Chapter  
/
3
/6  
/
12  
/Enter/0 9/Cancel/Jump  
• If you input a wrong number, press  
CANCEL.  
• Refer to the package supplied with  
Notes:  
the disc to check the numbers.  
You can select the Pause, Slow or Search playback in the zoom  
mode.  
Press ENTER. Playback starts.  
• Some discs may not respond to zoom feature.  
4
• When you change the title,  
playback starts from Chapter 1  
of the selected title.  
• Some discs may not work in the  
above operation.  
Note:  
In case of the Video-CD playback with PBC, the JUMP does not  
37  
work. To turn off PBC, see page  
.
31  
5R80101D [E] (P28-31)  
31  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Marking desired scenes  
The unit stores the points that you want to watch again up to 3 points.  
You can resume playback from each scene.  
C/D  
ENTER  
CANCEL  
MARKER  
DVD  
VCD  
DVD  
VCD  
Returning to the scenes  
Marking the scenes  
Press MARKER during playback or stop mode.  
Press MARKER during playback.  
1
2
3
1
2
Select the blank Marker using C or D.  
Then press ENTER at the desired scene.  
Press C or D to select the Marker 1-3.  
• Repeat this procedure to set the  
other 2 scenes.  
Press ENTER.  
Playback starts from the marked  
scene.  
Press MARKER to remove this display.  
3
To cancel the Marker  
Follow the above steps 1~2, then press CANCEL.  
Notes:  
• Some discs may not work with the marking operation.  
• The marking is cancelled when you open the disc tray or turn  
the power off.  
• Some subtitles recorded around the marker may fail to  
appear.  
32  
5R80101D [E] (P32-33)  
32  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat playback/A-B Repeat playback  
PLAY MODE  
/▼  
/
PLAY  
REPEAT A-B  
DVD  
VCD  
CD  
DVD  
VCD  
CD  
Repeat playback  
A-B Repeat playback  
A-B repeat playback allows you to repeat material between  
two selected points.  
PressPLAYMODEduringplaybackorstopmode.  
1
2
Press REPEAT A-B during playback.  
1
The start point is selected.  
A
[DVD]  
Press B/A to select “Chapter” or “Title”.  
The unit automatically starts repeat  
playback after finishing the current title  
or chapter.  
Press REPEAT A-B again.  
Repeat  
/Play Mode  
Off  
2
The end point is selected. Playback  
starts at the point that you selected.  
Playback stops at the end point, re-  
turns to Point A automatically, then  
starts again.  
[Audio CD, Video CD]  
Press D to select “Repeat”.  
Press B/A to select “Track” or “All”.  
A
B
The unit automatically starts repeat  
playback after finishing the current  
track.  
To resume normal playback  
Press REPEAT A-B again.  
• If you set the repeat mode during stop mode,  
press PLAY to start Repeat playback.  
” appears on the screen.  
Off  
Press PLAY MODE again to make the screen  
disappear.  
Notes:  
3
• In A-B Repeat mode, subtitles near the A or B locations may  
not be displayed.  
You cannot set the A-B Repeat for the scenes that include  
multiple angles.  
• A-B Repeat playback does not work when Repeat playback is  
activated.  
You may not be able to set A-B Repeat, during certain scenes  
of the DVD.  
• A-B Repeat does not work with an interactive DVD.  
• A-B Repeat is prohibited when PBC is on.  
To resume normal playback  
Select Repeat : “Off” in step 2.  
Notes:  
• Some discs may not work with the repeat operation.  
• In case of Video CD with PBC, repeat functions are prohib-  
ited during playback.  
33  
5R80101D [E] (P32-33)  
33  
2/24/05, 10:14 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
0–9  
Program playback/Random playback  
You can arrange the playback order of tracks or files on the disc. And also  
the unit selects tracks or files at random and playback them. These feature  
works for Audio CD, Video CD and JPEG CD.  
PLAY MODE  
/ /  
/
CANCEL  
PLAY  
SKIP7  
ENTER  
VCD  
CD  
Program playback  
Press  
/
/
/
to select “Program Playback”  
Press PLAY MODE in the stop mode.  
and press ENTER.  
4
1
2
The programs you selected will start to playback in  
the order.  
• In case of JPEG file, press SKIP  
to continue  
Press  
or  
to select Play Mode, then press  
the program playback.  
/
to select “Program”.  
• To resume normal playback, select Play Mode:  
“Off” in step 2.  
Play Mode  
Repeat  
:
:
Program  
Off  
1 9  
4
5
6
7
8
9
10  
11  
12  
2
3
3
11  
Clear  
Program Playback  
/Enter/0 9/Cancel/Play Mode  
Press  
/
or  
/
to select the programming  
position. Use Number buttons (0–9) to input the  
Track or file numbers.  
To change the program  
1. In the program mode, press C/D/B /A to select the track  
number.  
2. Press Number buttons (0–9) to select the track number to  
be replaced.  
3
• To program others, repeat Step 3.  
• If you input a wrong number, press  
CANCEL.  
To clear the program one by one  
In the program mode, press C/D/B/A to select the track  
number. Then press CANCEL.  
To clear all the programs  
In the program mode, press C/D/B/A to select “Clear”.Then  
press ENTER.  
Notes:  
• In playing back the Video CD with PBC, you cannot set  
Program playback.  
• The program is cancelled when you open the disc tray or  
turn the power off.  
VCD  
CD  
Random playback  
Press PLAY MODE during playback or stop  
mode.  
Press PLAY.  
1
2
3
The Random Playback will start.  
• If you set “Random” during playback mode,  
Random playback will begin after the track that is  
currently being played has ended.  
• To resume normal playback, select Play Mode:  
“Off” in step 2.  
Press C/D to select Play Mode, then press  
B/A to select “Random”.  
Note:  
In playing back the Video CD with PBC, you can not set  
Random playback.  
34  
5R80101D [E] (P34-38)  
34  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles/Title selection/DVD menu  
ENTER  
DVD MENU  
/ /  
/
PLAY  
ANGLE  
TOP MENU  
Changing angles  
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.  
Press ANGLE during playback.  
Press ANGLE repeatedly until the desired angle  
is selected.  
1
2
The current angle will appear.  
1/9  
Note:  
Depending on the DVD, you may not be able to change the  
angles even if multi-angles are recorded on the DVD.  
Title selection  
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.  
Press TOP MENU during playback.  
Press ENTER or PLAY.  
1
2
3
The playback of the selected title will  
start.  
Title menu appears on the screen.  
Press  
/
/
/
to select the desired title.  
Note:  
Depending on the DVD, you may not be able to select the title.  
Depending on the DVD, a “title menu” may simply be called a  
“menu” or “title” in the instructions supplied with the disc.  
DVD menu  
Some DVDs allow you to select the disc contents using the menu.  
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.  
Press DVD MENU during playback.  
The DVD menu appears on the screen.  
Press ENTER.  
1
2
3
The menu continues to another  
screen. Repeat steps 2 and 3 to set  
the item completely.  
• Press DVD MENU again to resume  
playback at the scene when you  
pressed DVD MENU.  
Press  
/
/
/
to select the desired item.  
Note:  
Depending on the DVD, you may not be able to resume  
playback from the scene point when you pressed DVD MENU.  
35  
5R80101D [E] (P34-38)  
35  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
Changing soundtrack language/  
Subtitles  
SUBTITLE  
AUDIO SELECT  
DVD  
VCD  
Changing soundtrack language  
Subtitles  
You can select the language when you play a multilin-  
gual disc.  
When playing back a disc recorded with subtitles, you can  
select the subtitle language or turn the subtitle off.  
Press AUDIO SELECT during playback.  
PressSUBTITLErepeatedlyduringplaybackuntil  
your desired language appears.  
1
1
The current soundtrack language will  
appear.  
1/8 Eng  
To turn off the subtitle, press SUBTITLE until  
“Off” appears.  
2
Press AUDIO SELECT repeatedly until the desired  
language is selected.  
2
Off  
The on screen display will disappear after a  
few seconds.  
• The on screen display will disappear after a few  
seconds.  
Notes:  
• Depending on the DVD, you may not be able to change  
subtitles, or to turn subtitles on or off.  
In case of Video CD playback  
• While playing a DVD, the subtitle may change when you  
open or close the disc tray.  
• In some cases, a selected subtitle language may not be  
changed immediately.  
Audio type changes as follows each time you press  
AUDIO SELECT.  
LR  
L
R
Notes:  
• If the desired language is not heard after pressing the  
button several times, the language is not recorded on the disc.  
• Changing soundtrack language is cancelled when you  
open the disc tray. The initial default language or available  
language will be heard if the disc is played back again.  
• If you select DTS in playing DTS-encoded disc, no sound  
will be heard from the TV/DVD’s speakers.  
36  
5R80101D [E] (P34-38)  
36  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Disc status/To turn off the PBC  
DISPLAY  
PLAY MODE  
//  
/
ENTER  
DVD  
VCD  
CD  
VCD  
Disc status  
To turn off the PBC  
With each press of DISPLAY, the status of the disc  
will appear on the screen and change as follows.  
Press PLAY MODE in the stop mode.  
1
Press  
/
to select Play Mode, then press  
/
to select “Off”.  
DVD  
2
00:34:56 01:12:33  
00:34:56 01:12:33  
1/99 Chapter 1/999  
1/9  
1/8 EngDolby Digital  
Title  
1/32 Eng  
To make status display disappear, press DISPLAY again.  
Video CD  
Press PLAY MODE again to make the screen  
disappear.  
00:12  
04:32  
PBC  
Track –/–  
00:12  
04:32  
3
To turn on the PBC  
Select Play Mode : “PBC” in step 2.  
Note:  
To make status display disappear, press DISPLAY again.  
You can also turn off the PBC by pressing number button 1  
and ENTER in the stop mode.  
Audio CD  
34:56  
71:33  
Track 11/99  
When you playback the CD disc, the status display will  
appear on the screen and continue displaying.  
37  
5R80101D [E] (P34-38)  
37  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced playback  
0–9  
JPEG playback  
You can select your desired JPEG file on the file menu and picture menu.  
The selected JPEG file is automatically adjusted to the TV screen. (When the  
aspect ratio of the JPEG file is different to your TV screen, the black bar will  
appear at the top and bottom, or the both sides of the TV screen.  
PAUSE  
ENTER  
DVD MENU  
/ /  
/
STOP  
PLAY  
SKIP  
/
CAUTION:  
ANGLE  
Some JPEG CDs cannot be played back depending on the recording conditions.  
TOP MENU  
CD  
CD  
JPEG CD playback  
Slide show playback  
The slide show enables you to view pictures (files) one after  
another automatically.  
Place a disc on which JPEG files have been  
recorded onto the tray.  
1
2
Preparation:  
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or  
“15 Seconds” (see page 42).  
A file menu screen will appear on the screen.  
Press B/A to select folder.  
-
/36  
CD  
Select your desired starting file for the slide  
Collection  
1
2
3
4
8
9
10  
11  
Pic-1  
Pic-2  
Pic-3  
Pic-4  
Pic-8  
Pic-9  
Pic-10  
Pic-11  
show in the step 3 as left.  
1
2
Press ENTER to start slide show from the se-  
lected file.  
Press C/D/B/A or Number buttons (0–9) to se-  
lect the desired file.  
To display a picture menu, press DVD MENU.  
(To return to a file menu, press TOP MENU.)  
Press B/A or C/D to select the desired file.  
3
• If you press PAUSE during the slide show, the slide  
show stops temporary. “ 4 ” appears briefly on the pic-  
ture.  
If the picture appears upside down or sideways, press  
ANGLE repeatedly until it’s right side up.  
”, “  
on the screen.  
Press PLAY or SKIP  
”, “  
” or “  
” appears briefly  
• To display next list, press SKIP  
/
.
again to resume the slide show.  
• When the slide show playback finished the file list ap-  
pears.  
Press ENTER. The selected picture appears on  
the screen.  
4
To stop the slide show, press STOP. The file list ap-  
pears.  
JPEG CD Information  
Limitations on JPEG CD playback  
Rotating an image  
You can rotate an image by 90 degrees by pressing  
ANGLE during playback of the image.  
• JPEG CD is the disc that is standardized by ISO9660, its  
file name must include 3-digits extension letters, “jpg”.  
• The directory and file names of the JPEG CD must be  
correspond to the ISO standardized files.  
,“  
,“  
or“  
appearsbriefly  
• This unit can read 600 files per disc. If a disc has more than  
600 files, it reads up to 600 files, the remaining files will be  
omitted.  
• The unit is able to recognize up to a maximum of 50  
directories per disc.  
• It may take more than one minute for this unit to read JPEG  
files depending on its structure.  
on the screen.  
Press STOP to end playback.  
The file menu appears on the screen.  
If you want to watch the other file, repeat steps  
3 ~ 4.  
5
Limitations on display  
• The maximum number for display is 16 letters. Available  
letters for display are the following: capital or small  
alphabets of A through Z, numbers of 0 through 9, and _  
(under score).  
Notes:  
• The picture menu is displayed when the FUJICOLOR CD or  
the Kodak Picture CD are played. To display the file menu, • Other letters than those above are replaced in hyphen.  
press TOP MENU.  
Notes on JPEG files  
• During JPEG-Playback, you cannot use SEARCH, A-B Re-  
To play back JPEG CD in the recorded order,  
peat functions.  
1. Use JPEG software that records data alphabetically or  
• You can use Repeat (Track or All), Random functions and  
numerically.  
Program playback for JPEG CD playback. (See pages 33 and  
2. Name each file including two-digit or three-digit number  
34.)  
(ex. “01” “02” or “001” “002”).  
3. Refrain from making too many sub-folders.  
38  
5R80101D [E] (P34-38)  
38  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the function settings  
You can change the default settings to customize performance  
to your preference.  
ENTER  
C/D/B/A  
SETUP  
RETURN  
DVD  
VCD  
CD  
Setting procedure  
Press SETUP during stop mode.  
To make SETUP screen disappear, press  
SETUP or RETURN.  
1
5
The following on-screen display  
appears.  
Press B or A to select the desired section, then  
press D or ENTER.  
2
3
4
Press C or D to select the desired option.  
Change the selection using B or A, by referring  
to the corresponding pages 41~43.  
• Repeat steps 3 and 4 to change  
other settings.  
• To select another operation, go  
back to step 2 by pressing C  
repeatedly.  
39  
5R80101D [E] (P39-44)  
39  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the function settings (continued)  
Setting details  
Option  
Details  
Page  
Section  
Menu  
Subtitle  
Audio  
To select the language of “Menu”, “Subtitle” and  
“Audio” if more than one language are recorded on  
the disc.  
41  
OSD  
To select a preferred language for on screen display.  
Tv Screen  
To select a picture size according to the aspect  
ratio of your TV.  
41  
41  
Display  
To turn on or de-activate the operational status dis-  
play on the screen.  
Picture Mode  
JPEG Interval  
DRC  
To select a preferred picture mode from “Video”,  
“Film” or “Auto”.  
42  
42  
To select a preferred setting for the slide show play-  
back.  
To select On or Off for DRC (Dynamic Range Con-  
trol).  
42  
Password  
Parental  
Input 4-digit password to set the parental level.  
43  
To select a preferred parental level for the parental  
setting.  
40  
5R80101D [E] (P39-44)  
40  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tv Screen  
Display  
Picture Mode  
JPEG Interval  
4:3  
On  
Auto  
Off  
/Setup/Return  
Tv Screen  
You have the following screen sizes to choose from:  
4:3 : (Letter box)  
Menu, Subtitle, Audio  
You can select the language of “Menu”, “Subtitle” and  
“Audio” if more than one languages are recorded onto  
the disc.  
Select this mode when connecting to a conventional  
TV. When playing back a wide screen-DVD disc, it  
displays the wide picture with black bands at the  
top and bottom of screen.  
English, Francais, Espanol:  
The selected language will be heard or seen.  
Other:  
Other language can be selected (see the  
“Language code list” on page 45).  
4:3  
: (Pan scan)  
It displays the wide picture on the whole screen  
with left and right edges automatically cut off.  
Original: (Audio)  
The unit will select the first-priority language of  
each disc.  
Press OPEN/CLOSE to view in the selected screen size.  
Off: (Subtitle)  
Subtitles do not appear.  
Note:  
If the DVD disc is not formatted in the pan & scan style,  
it displays 4:3 style.  
Note:  
If the selected language is not recorded on the disc, the  
first-priority language is selected.  
Display  
OSD  
On screen display can be switched on or off when you  
press the buttons.  
The setup language can be selected.  
English: To display OSD language is English.  
Francais: To display OSD language is French.  
Espanol: To display OSD language is Spanish.  
On: On screen displays appear when you press  
the buttons (factory setting).  
Off: On screen displays do not appear when you  
press any buttons.  
41  
5R80101D [E] (P39-44)  
41  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
Customizing the function settings (continued)  
Setting details  
Picture Mode  
There are two types of source content in pictures re-  
corded in DVD video discs: film content (pictures re-  
corded from films at 24 frames per second) and video  
content (video signals recorded at 30 frames per sec-  
ond).Makethisselectionaccordingtothetypeofcontent  
being viewed.  
Auto: Select this position normally.  
DRC  
TheDVDplayerautomaticallydetectssource  
content, film or video, of playback source,  
and converts that signal in the progressive  
output format in an appropriate method.  
DRC (Dynamic Range Control) enables you to control  
the dynamic range so as to achieve a suitable sound for  
your equipment.  
Film: TheDVDplayerconvertsfilmcontentpictures  
in the progressive output format appropri-  
ately. Suitable for playback of film content  
pictures. The progressive output feature will  
be most effective under this selection.  
On: Loud sound such as explosion or similar  
is toned down slightly when played back.  
This makes it suitable for when it is con-  
nected to a stereo.  
Off: It plays back at the recording level on the  
disc.  
Video: The DVD player filters video signal, and  
converts it in the progressive output format  
appropriately.  
Notes:  
• This function works only during playback of Dolby Digital  
recorded discs.  
• The level of Dynamic Range Reduction may differ  
depending on DVD video disc.  
Suitable for playback of video content  
pictures.  
Note:  
Depending on the disc, pictures may be cut off or doubled.  
In this case, select “Video”.  
JPEG Interval  
You can continuously play back all JPEG files automati-  
cally.  
After the setting below, start playing the disc on which  
JPEG files have been recorded.  
Off:  
Plays back one file at a time.  
5 Seconds:  
Plays back images in the form of a slide show at  
5 second intervals.  
10 Seconds:  
Plays back images in the form of a slide show at  
10 second intervals.  
15 Seconds:  
Plays back images in the form of a slide show in  
15 second intervals.  
42  
5R80101D [E] (P39-44)  
42  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the parental level  
1) Press C or D to select “Password”.  
2) Press Number buttons (0–9) to enter the password  
you have stored.  
3) Press ENTER.  
• The rating is now unlocked.  
4) Press C or D to select “Parental”, then press B  
or A to change the parental level.  
5) Press C or D to select “Password”, then press  
Number buttons (0–9) to enter the password.  
Note:You can change the password if you want.  
6) Press ENTER.  
Parental control setting  
Some discs are specified not suitable for children.  
Suchdiscscanbelimitednottoplaybackwiththeunit.  
Now the parental level is changed and locked.  
1) Press C or D to select “Parental”, then press B  
or A until the level you require appears.  
• Level Off: The parental control setting does not  
function.  
If you forget the password...  
1. Press OPEN/CLOSE to open the disc tray.  
2. Remove the disc.  
3. Press OPEN/CLOSE again to close the disc tray.  
“No Disc” appears on the screen.  
4. While holding STOP down on the front panel, press  
7 on the remote control. “PASSWORD CLEAR”  
appears on the screen.  
• Level 8: All DVD software can be played back.  
• Level 1: DVD software for adults cannot be  
played back.  
Select from the level 1 to level 8. The limitation will  
be more severe as the level number is lower.  
2) Press C or D to select “Password”.  
Press Number buttons (0–9) to input a 4-digit  
password. Be sure to remember this number!  
• If you input a wrong number, press CANCEL.  
3) Press ENTER to store the password.  
Note: Now the rating is locked and the setting can  
not be changed unless you enter the correct pass  
word.  
5. Enter a new password again.  
Note:  
If each setup (pages 41~43) has been completed, the unit  
can always be worked under the same conditions (espe-  
cially with DVD discs).  
Each setup will be retained in the memory even if you turn  
the power off.  
4) Press OPEN/CLOSE to activate Parental control  
setting. (See “Temporary disabling of rating level  
by DVD disc” on page 44.)  
Notes:  
• Depending on the discs, the unit cannot limit playback.  
• Some discs may not be encoded with specific rating  
level information though its disc jacket says “adult.” For  
those discs, the age restriction will not work.  
43  
5R80101D [E] (P39-44)  
43  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function setup  
OPEN/CLOSE  
0–9  
Temporary disabling of rating level by DVD disc  
Depending on the DVD disc, the disc may try to temporarily cancel the rating  
level that you have set.  
It is up to you to decide whether to cancel the rating level or not.  
/▼  
ENTER  
PLAY  
RETURN  
Enter the password with Number buttons (0–9).  
Then press ENTER.  
Load a DVD disc and press PLAY or OPEN/  
28  
CLOSE on the unit  
.
1
2
4
To exit from the entry, press RETURN.  
IftheDVDdischasbeendesignedtotemporarily  
canceltheRatinglevel, thescreenwhichfollows  
the “Reading” screen will change, depending on  
which disc is played. If you select “YES” with the  
ENTER key, “Your disc exceeds the parental  
control level#.” screen will then appear.  
Playback will commence if the entered  
password was correct.  
5
Reading  
Your disc exceeds  
the parental control level#.  
Parental Control Level  
Cancel Picture  
Note:  
/Enter/Return  
This temporary cancellation of rating level will be kept until the  
disc is ejected.  
When the disc is ejected, the original rating level will be set again  
automatically.  
If you wish to cancel the set rating level tempo-  
rarily, select “Parental Control Level” with  
or  
3
, then press ENTER. If the 4-digit password at  
step 2 on page 43 has been set, the password  
entering screen will appear as shown in step 4.  
Alternatively, if the password has not been set,  
playback will commence. If you don’t know (or  
have forgotten) the password, select “Cancel  
Picture”.  
The setting screen will disappear. Press OPEN/  
CLOSE to remove the disc.  
44  
5R80101D [E] (P39-44)  
44  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Language code list  
41  
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio”  
.
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2322 Sundanese  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2919  
2921  
2922  
2925  
1529  
2931  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
3219  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
Breton  
1929 Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
1924 Pashto, Pushto 2629 Tonga  
1911 Persian  
1711 Polish  
1611 Turkish  
2622 Turkmen  
2630 Twi  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese  
2923 Volapük  
2911 Welsh  
1714 Wolof  
Danish  
Dutch  
English  
2928 Xhosa  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian 2918 Yiddish  
2211 Shona  
2924 Yoruba  
2914 Zulu  
1625 Latvian, Lettish 2232 Sindhi  
45  
5R80101D [E] (P45-49)  
45  
2/24/05, 10:15 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer  
or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
POWER  
• Make sure the power cord is plugged in.  
• Try another AC outlet.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit, then plug it back in.  
5
TV/DVD does not operate.  
TV BROADCAST RECEPTION  
• Station or Cable TV experiencing problems, tune to another station. 20  
Poor sound or no sound.  
• Check Volume adjustments.  
• Check for sources of possible interference.  
20  
48  
20  
13, 14  
48  
• Station or Cable TV experiencing problems, tune to another station.  
• Check antenna or Cable TV connections, reorient antenna.  
• Check for sources of possible interference.  
Poor picture or no picture.  
26  
• Check picture control adjustments.  
Station or Cable TV experiencing problems, tune to another station. 20  
Poor reception on some channels.  
• Station signal is weak, reorient antenna to receive weaker station. 13,14  
• Check for sources of possible interference.  
48  
• Station or Cable TV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
20  
23  
26  
Poor color or no color.  
• Check antenna or Cable TV connections, reorient antenna.  
• Check for sources of possible interference.  
13, 14  
48  
20  
23  
• Station or Cable TV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Check antenna orientation.  
• Check all Cable TV connections.  
• Set TV/CABLE selection to the CABLE position.  
• Station or Cable TV system problems, try another station.  
Picture wobbles or drifts.  
No CATV reception.  
13, 14  
14  
23  
20  
Horizontal or diagonal bars on  
screen.  
• Check antenna connections, reorient antenna.  
• Check for sources of possible interference.  
13,14  
48  
• Make sure TV/CABLE selection is in the appropriate position.  
• If using antenna, check UHF antenna connections.  
23  
13  
No reception above channel 13.  
• No broadcast on station tuned.  
• Sleep Timer is set.  
• Power interrupted.  
20  
21  
TV shuts off.  
• TV station experiencing problems or program tuned is not closed  
captioned. Try another channel.  
• Check Cable TV connection or VHF/UHF antenna, reposition or  
rotate antenna.  
• Press CLOSED CAPTION button to turn on the closed caption  
decoder.  
20  
13,14  
22  
Closed - Caption is not activated.  
Display is not shown in your  
language.  
• Select proper language in the menu options.  
19  
46  
5R80101D [E] (P45-49)  
46  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
• No disc is inserted.  
• The disc may be dirty. Clean up the disc.  
• The unit cannot play CD-ROMs, etc.  
28  
7
8
Playback doesn’t start.  
No picture.  
• TV/DVD selector is not set correctly.  
28  
• Check the input selector of the amplifier is set properly.  
• The unit is in the special playback mode.  
• Select the correct Audio Output position on AV amplifier.  
30  
No sound.  
Picture is distorted during fast  
reverse/forward playback.  
• The picture will be distorted occasionally.  
Stopping playback, search, slow-  
motion play, repeat play, or  
program play, etc. cannot be  
performed.  
• Some discs may not do some of the functions.  
No on-screen display.  
No surround sound.  
• Select Display On.  
41  
16  
• The setup does not match your stereo system.  
The unit or remote operation key  
is not functioning.  
• Turn off the unit and unplug the AC power cord for several min-  
utes, then replug it.  
Playback does not start when the  
title is selected.  
• Check the Parental setup.  
43  
Audio soundtrack and/or subtitle  
language is not changed when  
you play back a DVD.  
• Multilingual language is not recorded on the DVD disc.  
36  
• Some discs have no subtitles.  
• Subtitles are cleared. Press the SUBTITLE button.  
No subtitle.  
36  
Angle cannot be changed.  
• Multi-angles are not recorded on the DVD disc.  
• The function is prohibited with the unit or the disc.  
35  
30  
” appears on the screen.  
REMOTE CONTROL  
The remote control does not  
function.  
• Aim at the remote control at the remote sensor.  
• Operate within approx. 5 meters or reduce the light in the room.  
• Clear the path of the beam.  
12  
• The batteries are weak. Replace the batteries.  
• Check the batteries are inserted correctly.  
47  
5R80101D [E] (P45-49)  
47  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable  
TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV/DVD is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST  
or BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
48  
5R80101D [E] (P45-49)  
48  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
MD13Q41  
AC 120 V 60 Hz  
Operation: 75 W, Stand by: 5 W  
13 Inch* (335.4 mm diagonal)  
MD20Q41  
General  
Power supply  
Power consumption  
Picture tube  
Speaker  
Operation: 90 W, Stand by: 5 W  
20 Inch* (508.0 mm diagonal)  
1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 ohm x 2 3 inches (76.5 mm), 8 ohm x 2  
Audio output power  
Weight  
1.5 W + 1.5 W  
24.3 lbs (11.0 kg)  
2.5 W + 2.5 W  
48.5 lbs (22.0 kg)  
Width: 14-1/4 inches (362 mm)  
Height: 15-1/16 inches (382 mm)  
Depth: 14-3/8 inches (365 mm)  
181 channel freq. synthesized  
Width: 19-3/4 inches (502 mm)  
Height: 20-3/16 inches (513 mm)  
Depth: 19-1/4 inches (489 mm)  
Dimensions  
Tuner  
VHF  
2-13  
UHF  
CATV  
14-69  
125 Channels  
Antenna input  
UHF/VHF: 75 coaxial  
Applicable disc  
Frequency range  
Operating conditions  
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)  
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz  
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal  
Input/Output  
Video input  
1.0 V (p-p), 75 , negative sync., pin jack x 1  
–8 dBm, 50 k, negative sync., pin jack (L/R) x 1  
0.5 V (p-p), 75 , pin jack x 1  
Audio input  
Audio output (DIGITAL COAXIAL)  
Supplied accessories  
Remote control (DC-SB1)..................................... 1  
Batteries (R03/AAA) ............................................. 2  
300-75 matching transformer ............................ 1  
* Screen size is approximate.  
• This model complies with the above specifications.  
• Designs and specifications are subject to change without notice.  
• This model may not be compatible with features and/or specifications that may be added in the future.  
49  
5R80101D [E] (P45-49)  
49  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States Warranty  
for CRT-based TV/DVD Combinations,TV/VCR Combinations, and TV/DVD/VCR Combinations,  
25” and Smaller (“TV Combination(s)”)  
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in  
the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR  
ANY PERSON RECEIVING THIS TV COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER  
AND TO NO OTHER PURCHASER OR TRANSFEREE.  
TV COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,  
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.  
TV COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,  
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.  
Owner's Manual and Product Registration Card  
Read this owner’s manual thoroughly before operating this  
TV Combination.  
Limited Ninety (90) Day Warranty on Labor  
TACP warrants this TV Combination and its parts against  
defects in materials or workmanship for period of ninety (90)  
days after the date of original retail purchase. DURING THIS  
PERIOD,TACP WILL, AT TACP'S OPTION, REPAIR OR  
REPLACE A DEFECTIVE PART WITH A NEW OR  
REFURBISHED PART WITHOUT CHARGE TOYOU FOR  
PARTS OR LABOR.  
Complete and mail the enclosed product registration card or  
register your TV Combination online at  
registering your TV Combination you will enable TACP to  
bring you new products specifically designed to meet your  
needs and help us to contact you in the unlikely event a  
safety notification is required under the U.S. Consumer  
Product Safety Act. Failure to complete and return the  
product registration card does not diminish your warranty  
rights.  
Limited One (1)Year Warranty on Parts  
TACP further warrants the parts in this TV Combination  
against defects in materials or workmanship for a period of  
one (1) year after the date of original retail purchase.  
DURING THIS PERIOD,TACP WILL, AT TACP'S OPTION,  
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW  
OR REFURBISHED PART WITHOUT CHARGE TOYOU  
FOR THE PART, PROVIDED THAT IF A DEFECTIVE PART  
IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS  
AFTER THE DATE OF ORIGINAL RETAIL PURCHASE,  
YOU MUST PAY ALL LABOR CHARGES IN CONNECTION  
WITH THE REPAIR OR REPLACEMENT THEREOF.  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE  
FOLLOWING CONDITIONS:  
(1) You must retain your original bill of sale or provide  
other proof of purchase.  
(2) All warranty servicing of this TV Combination must be  
performed by an Authorized TACP Service Station.  
Limited Two (2)Year Warranty on Picture Tube  
TACP further warrants the picture tube in this TV  
(3) The warranties from TACP are effective only if this TV  
Combination is purchased and operated in the  
Continental U.S.A. or Puerto Rico.  
Combination against defects in materials or workmanship for  
a period of two (2) years after the date of original retail  
purchase. DURING THIS PERIOD,TACP WILL, AT TACP'S  
OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE  
TUBE WITH A NEW OR REFURBISHED PICTURE TUBE  
WITHOUT CHARGE TOYOU, PROVIDED THAT IF A  
DEFECTIVE PICTURE TUBE IS REPAIRED OR  
REPLACED AFTER ONE (1)YEAR AFTER THE DATE OF  
ORIGINAL RETAIL PURCHASE,YOU MUST PAY FOR ALL  
LABOR CHARGES IN CONNECTION WITH THE REPAIR  
OR REPLACEMENTTHEREOF.  
(4) Labor service charges for set installation, setup,  
adjustment of customer controls and installation or repair  
of antenna systems are not covered by this warranty.  
Reception problems caused by inadequate antenna  
systems, misaligned satellite dishes, cable television  
distribution, VCRs, DVD players/recorders, personal  
computer level IEEE-1394 devices, and any other  
connected signal source device are your responsibility.  
(5) Warranties extend only to defects in materials or  
workmanship as limited above, and do not extend to any  
TV Combination or parts that have been lost or  
discarded by you or to damage to the TV Combination or  
parts caused by fires, misuse, accident, Acts of God  
(such as lightning or fluctuations in electric power),  
improper installation, improper maintenance, or use in  
violation of instructions furnished by TACP; use or  
malfunction through simultaneous use of this TV  
Combination and connected equipment; or to units that  
have been modified or had the serial number removed,  
altered, defaced, or rendered illegible.  
Rental Units  
The warranty for TV Combination rental units begins on the  
date of the first rental or thirty (30) days after the date of  
shipment to the rental firm, whichever comes first.  
Limited Warranty for Commercial Units  
TACP warrants TV Combinations that are sold and used for  
commercial purposes as follows: all parts are warranted  
against defects in materials or workmanship for a period of  
ninety (90) after the date of original retail purchase.  
DURING THIS PERIOD,TACP WILL, AT TACP'S OPTION,  
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW  
OR REFURBISHED PART WITHOUT CHARGE TOYOU.  
50  
5R80101D [E] (P50-Back)  
50  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS  
ANDYOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY  
VARY FROM STATE TO STATE IN THE U.S.A. SOME  
STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS  
ON THE DURATION OF AN IMPLIED WARRANTY, WHEN  
AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES. THEREFORE,THE ABOVE PROVISIONS MAY  
NOT APPLY TOYOU UNDER SUCH CIRCUMSTANCES.  
How to Obtain Warranty Service  
If, after following all of the operating instructions in this  
manual and reviewing the section  
entitled "Troubleshooting," you find that service is needed:  
(1) To find the nearest TACP Authorized Service Station,  
visit TACP's website at www.tacp.toshiba.com/service  
or contact TACP's Consumer Solution Center toll free at  
1-800-631-3811.  
(2) You must present your original bill of sale or other proof  
of purchase to the TACP Authorized Service Station. You  
must deliver the entire TV Combination to a TACP  
Authorized Service Station. You must pay for all  
transportation and insurance charges for the TV  
Combination to and from the TACP Authorized Service  
Station.  
For additional information, visit TACP's website:  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY  
STATE OF THE U.S.A., INCLUDING THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY  
LIMITED TO THE DURATION OF THE LIMITED  
WARRANTIES SET FORTH ABOVE. WITH THE  
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE  
LAW OF ANY STATE OF THE U.S.A. AS HEREBY  
LIMITED,THE FOREGOING WARRANTY IS EXCLUSIVE  
AND IN LIEU OF ALL OTHER WARRANTIES,  
GUARANTEES, AGREEMENTS, AND SIMILAR  
OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR  
OR REPLACEMENT OF ANY PARTS. IN NO EVENT  
SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR  
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED  
TO, LOST PROFITS, BUSINESS INTERRUPTION, OR  
MODIFICATION OR ERASURE OF RECORDED DATA  
CAUSED BY USE, MISUSE OR INABILITY TO USE THIS  
TV COMBINATION).  
No person, agent, distributor, dealer or company is authorized  
to change, modify or extend the terms of these warranties in  
any manner whatsoever. The time within which an action  
must be commenced to enforce any obligation of TACP arising  
under the warranty or under any statute, or law of the United  
States or any state thereof, is hereby limited to ninety (90)  
days from the date you discover or should have discovered,  
the defect. This limitation does not apply to implied warranties  
arising under the law of any state of the U.S.A.  
51  
5R80101D [E] (P50-Back)  
51  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in Thailand  
K
J5R80101D SH 05/04  
5R80101D [E] (P50-Back)  
52  
2/24/05, 10:16 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Microcassette Recorder PR 10 User Manual
Tatung Rice Cooker TRC 10DC User Manual
Teac Electronic Accessory LP R550USB User Manual
TIMEX Weather Products Thermometer TX1007 User Manual
TOA Electronics Portable Speaker H 3 User Manual
Toastmaster Food Warmer TTS1 User Manual
Toshiba Welding System VF A7 User Manual
Uniden Security Camera GC45 User Manual
ViewSonic Computer Monitor Q2205WB User Manual
Walker Lawn Mower 42 inch User Manual