Toshiba TV DVD Combo MD13N3 User Manual

COMBINATION COLOR TELEVISION AND  
DVD/CD PLAYER  
Owner’s Manual  
MD13N3  
DIGITAL VIDEO  
ATTENTION  
For your protection in the event of theft or loss of this product, please fill in the  
information listed below which is for your own personal records.  
Date of Purchase  
Serial No.  
:
:
:
Place of Purchase  
TV/CATV MODE SELECTION  
When shipped from the factory, the TV/CATV menu option is set to the  
“CATV”(Cable Television) mode.  
If not using CATV, set this menu option to the “TV” position.  
Before operating the unit, please read this manual thoroughly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning the exterior cabinet only.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
8A. An appliance and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation,  
and to ensure reliable operation of the unit, and to protect it from overheating.  
S3126A  
These openings must not be blocked or covered. The openings should never be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat  
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturers instructions have been adhered to.  
10. POWER SOURCE  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not  
sure of the type of power supply to your home, consult your appliance dealer or local power company. For  
units intended to operate from battery power, or other sources, refer to the respective pages on this Own-  
er's Manual for their operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be  
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into  
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the  
outlet, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the grounding-type plug.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
(Continued)  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,  
as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-  
ments for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
For example:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
21. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
22. DISC TRAY  
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.  
23. CONNECTING  
When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
24. SOUND VOLUME  
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  
sound may cause hearing or speaker damage.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
25. SOUND DISTORTION  
Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.  
26. HEADPHONES  
When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-  
ously with high volume sound, it may cause hearing damage.  
27. LASER BEAM  
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the  
laser beam. It may cause sight damage.  
28. DISC  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
29. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD  
IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on discs  
On handling discs  
Structure of disc contents  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. VIDEO CDs and  
AUDIO CDs are divided into tracks.  
Do not touch the playback side of the disc.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
VIDEO CD/AUDIO CD  
VIDEO CD/AUDIO CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Each title, chapter or track is assigned a number, which  
is called title number, chapter numberor track  
numberrespectively.  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
There may be discs that do not have these numbers.  
Notes on copyright  
It is forbidden by law to copy, broadcast, show,  
broadcast on cable, play in public, and rent copyrighted  
material without permission.  
This device does not tape-record copy protected DVD  
Video Discs.  
The device is not to be used for copying copyrighted  
content without the express written permission of the  
copyright owner.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
Obtaining such permission is the sole responsibility of  
the user.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned  
by Macrovision Corporation and other rights owners.  
Use of this copyright protection technology must be  
authorized by Macrovision Corporation, and is intended  
for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Before using your unit  
IMPORTANT SAFEGUARDS .............................................. 3  
Notes on discs...................................................................... 6  
Contents ............................................................................... 7  
Parts and functions .............................................................. 8  
Remote control ..................................................................... 9  
Power source ..................................................................... 10  
Antenna connections.......................................................... 11  
Cable TV connections ........................................................ 12  
TV operation  
Setting the language .......................................................... 13  
TV operation....................................................................... 14  
Closed caption ................................................................... 16  
To memorize channels ....................................................... 17  
Setting the V-Chip .............................................................. 19  
Picture control adjustment.................................................. 22  
Stereo and separate audio program (SAP) ........................ 23  
Playback operation  
Disc .................................................................................... 24  
Preparation/Status display of disc ...................................... 25  
Playback procedure ........................................................... 26  
Special playback ................................................................ 27  
Advanced Function  
Zooming/Locating desired scene ....................................... 28  
Repeat/Random/Program playback and Repeat A-B......... 29  
Changing soundtrack language/Subtitles .......................... 30  
Changing angles/Title selection/DVD menu....................... 31  
Additional Information  
Setting language ................................................................ 32  
Setting the aspect ratio of TV screen/Setting on screen  
display ................................................................................ 33  
Dynamic Range Control ..................................................... 34  
Parental control setting ..................................................... 35  
To change the parental level .............................................. 36  
Temporary disabling of rating level by DVD disc ................ 37  
Language code list ............................................................. 38  
Reception disturbances...................................................... 39  
Connections to other equipments ...................................... 40  
Problems and troubleshooting ............................................. 42  
Specifications ..................................................................... 44  
Warranty............................................................................. 45  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and functions  
Front  
AUDIO (L/R)/VIDEO IN jacks (LINE)  
SKIP buttons  
VOLUME UP/DOWN buttons  
OPEN/CLOSE button  
Disc tray  
Power indicator  
POWER button  
Headphone jack  
STOP button  
PLAY button  
Remote sensor  
CHANNEL UP/DOWN buttons  
Rear  
COAXIAL DIGITAL AUDIO OUT jack  
RF IN jack  
AC power cord  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Page  
RECALL  
Call TV information  
15  
25  
Call DVD information  
Switch between TV/AV and DVD  
Power On/Off  
TV/DVD  
POWER  
0-9  
25  
13,14,25  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Direct channel selection of TV  
Input setting  
Enter a password  
14,18  
28,29  
19,21,35~37  
1
4
2
5
8
3
6
INPUT SELECT  
GAME  
Switch between TV/AV  
41  
Switch between TV/AV and GAME  
Open or Close the tray  
Sleep timer  
41  
26,37  
15  
OPEN/CLOSE  
MUTE  
OPEN/CLOSE  
SLEEP  
7
SLEEP  
9
CLOSED  
CAPTION  
0
CLOSED CAPTION  
Switch between TV/Caption/Text in  
Closed Caption mode  
16  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
MUTE  
Switch off the sound  
Select title  
15  
31  
30  
TOP MENU  
SUBTITLE  
AUDIO  
Set Subtitle  
CH +  
Switch the sound of TV  
Change sound track language  
23  
30  
VOL –  
VOL +  
ANGLE  
Change playback angle  
31  
SETUP/MENU  
TV mode - Display menu of TV  
13,17~22  
RETURN  
ENTER  
CH –  
DVD mode - Call up initial setup mode 32~36  
DVD MENU  
CANCEL  
Display DVD menu  
31  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Reset information in the menu 19,22,28,35  
ZOOM/CH RTN  
Switch between present/last channel  
Zoom  
15  
28  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
CH+/–  
Select channel of TV  
Cursor buttons  
15  
13,17~22  
26,28,31~36  
VOL +/–  
Adjust volume of TV  
Cursor buttons  
14  
13,17~22  
26,28,31  
RETURN  
ENTER  
Remove DVD set up menu  
32~37  
Enter information in the menu 13,19,21,26  
28,29,31~37  
FWD/REV  
PLAY  
Fast Forward/Review playback  
27  
26,27,29,31,37  
29  
Playback  
PLAY MODE  
SKIP  
Select playback mode  
Skip chapter to forward or reverse  
direction  
27  
STOP  
JUMP  
SLOW  
PAUSE  
Stop  
26  
28  
27  
27  
Locating desired scene  
Forward/Reverse- slow motion  
Pause CD sound  
Still picture of DVD  
REPEAT A-B  
Repeat playback between A and B  
29  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Inserting Batteries  
Slide the battery compartment  
cover in the direction of the  
arrow.  
Install two "AAA" batteries  
(supplied), paying attention to  
the polarity diagram in the  
battery compartment.  
Replace the compartment  
cover.  
1
2
3
Operation  
Aim the remote control at the remote sensor and  
press control buttons to operate.  
Operate the remote control within 30° angle on  
either side of the remote sensor, up to a dis-  
tance of Approx. 5 meters.  
Approx. 5 meters  
The precautions below should be followed when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.  
Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from  
possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery  
manufacturers directions).  
Power source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert  
AC Outlet  
the AC cord plug into a standard 120V 60Hz polarized AC outlet.  
Wider Hole  
and Blade  
NOTES:  
Never connect the AC line cord plug to other than the specified  
voltage (120V 60Hz). Use the attached power cord only.  
If the polarized AC cord does not fit into a non-polarized AC  
outlet, do not attempt to file or cut the blade. It is the users  
responsibility to have an electrician replace the obsolete outlet.  
If you cause a static discharge when touching the unit and the  
unit fails to function, simply unplug the unit from the AC outlet  
and plug it back in. The unit should return to normal operation.  
If the AC cord plug is plugged in for the first time, wait for about  
5 seconds before pressing the POWER button.  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna connections  
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna  
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.  
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)  
Connect the 75 ohm Cable from the Combination  
VHF/UHF Antenna to the Antenna Jack.  
Antenna  
Jack  
Antenna  
Jack  
If your Combination VHF/UHF Antenna has a 300  
ohm Twin-lead Wire, the use of the 300-75 ohm  
Matching Transformer may be necessary.  
75 ohm  
Coaxial  
Cable  
300-75 ohm  
Matching  
Transformer  
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)  
Connect the UHF 300 ohm Twin-lead Wire to the  
Combiner (not supplied). Connect the VHF 300  
300-75 ohm  
Matching  
Transformer  
Antenna  
Jack  
ohm Twin-lead Wire to the 300-75 ohm Matching  
Transformer. Attach the Transformer to the Com-  
biner, then attach the Combiner to the Antenna  
Jack.  
Combiner  
UHF 300 ohm  
VHF 300 ohm  
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
Twin-lead Wire to the Combiner. Attach the Com-  
biner to the Antenna Jack.  
Antenna  
Jack  
VHF 75 ohm  
Combiner  
UHF 300 ohm  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable TV connections  
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable  
TV Converter box. Some cable companies offer premium pay channelsin which the signal is  
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device  
which is generally provided by the cable company.  
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE  
For basic cable service not requiring a Converter/Descrambler  
Antenna  
box, connect the CATV 75 ohm Coaxial Cable directly to the  
Jack  
Antenna Jack on the back of the TV/DVD.  
75 ohm  
Coaxial Cable  
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE  
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the  
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,  
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the  
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually  
channel 3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
CATV Cable  
Antenna  
Jack  
75 ohm Cable to  
TV/DVD  
Converter/  
Descrambler  
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH  
SCRAMBLED PREMIUM CHANNELS  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from  
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the B”  
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the Aposition, tune  
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/  
Descrambler box to tune scrambled channels.  
Converter/  
Descrambler  
Incoming  
75 ohm  
Antenna  
Jack  
75 ohm Cable  
to TV/DVD  
CATV Cable  
A
A/B Switch  
Splitter  
B
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
You can choose from three different languages (English, French and Spanish) for the on-screen displays.  
Adjustment menus and messages will appear in the language of your choice.  
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU  
button initially. Select the language you prefer first, then proceed with the other menu options.  
To turn on the TV/DVD, press POWER. The Power indicator  
will light.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press MENU in the TV mode.  
The TV menu screen will appear.  
2
3
1
4
2
5
8
3
6
Press  
or  
until the OPTION  
OPEN/CLOSE  
MUTE  
menu appears.  
7
SLEEP  
9
CLOSED  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
/
/
/
/MENU  
<
>
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
or  
to select the  
4
5
6
LANGUAGEoption, then press  
CH +  
or  
button.  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
/
/
/
/MENU  
<
<
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Press  
or  
to select the  
desired language: English  
(ENGLISH), Spanish  
(ESPAÑOL) or French  
(FRANCAIS), then press  
ENTER.  
SKIP  
LANGUAGE/IDIOMA/LANGUE  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/
/ ENTER / MENU  
<
<
Press MENU until the MENU  
screen is cleared.  
NOTE:  
If the unit does not operate properly,  
or No key operation (by the unit and/  
or the remote control): Static electricity,  
etc., may affect the player's operation.  
Disconnect the AC power cord once, then  
connect it again.  
TheTV section has its own menu and also  
DVD section has its own menu (see page  
32).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
To turn on the TV/DVD, press  
POWER.  
1
2
Adjust the volume level by  
pressing VOL + or . The volume  
level will be indicated on the  
screen by green bars. As the  
volume level increases, so do  
the number of bars. If the volume  
decreases, the number of green  
bars also decreases.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
VOLUME  
32  
1
4
2
5
8
3
6
Set the TV/CATV menu  
option to the appropriate  
position. (See page 17.)  
3
4
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
Press the Direct Channel selection  
buttons to select the channel.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
CH 012  
TV Mode Direct Channel Selection  
When the TV/CATV menu option is  
in the TV position, all channels can  
be instantly selected by using two  
buttons. (for example, to select  
channel 2, press 0, then 2. If  
you press only 2, channel  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
selection will be delayed for a few  
seconds.) For channels 10 and  
above, press the 2 digits in order.  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
CATV Mode Direct Channel Selection  
When the TV/CATV menu option is in the CATV position, channels  
can be selected as follows:  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
TO SELECT CATV CHANNELS:  
SKIP  
1-9:  
Press 0twice, then 1-9 as needed. Example, to select  
channel 2, press "002".  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
10-12:  
13-99:  
Press 0, then the remaining 2 digits. Example, to  
select channel 12, press "012".  
Press the 2 digits in order. Example, to select channel  
36, press "36".  
100-125: Press the 3 digits in order. Example, to select channel  
120, press "120".  
NOTE FOR CHANNELS 1-12:  
If only 1 or 2 buttons are pressed, the corresponding channel  
will be selected in 2 seconds.  
CATV  
TV  
VHF  
2-13  
VHF  
2-13  
UHF  
14-69  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
NOTES:  
If a channel with no broadcast is  
selected, the sound will automati-  
cally be muted.  
If a station being viewed stops  
broadcasting, the TV will automati-  
cally shut itself off after 15 minutes.  
(5A)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL UP/DOWN  
Press and release CH + or . The  
channel automatically stops at the  
next channel set into memory.  
For proper operation, before select-  
ing channels, they should be set into  
the memory. See pages 17 and 18  
To memorize channels”  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
RECALL  
STEREO SAP  
CH 012  
Press RECALL to display the  
current informations on the screen.  
Press RECALL again to clear the  
call display.  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
SEL. MONO+SAP  
0
Channel number or VIDEO mode  
Stereo or SAP (second audio  
program) audio status  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Audio output status  
CH RETURN  
CH +  
This button allows you to go back to  
the last channel selected by pressing  
CH RTN. Press CH RTN again to  
return to the last channel you were  
watching.  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
MUTE  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
MUTE  
Press MUTE to switch off the sound.  
The TV/DVDs sound will be silenced  
and MUTEwill briefly appear on the  
screen. The sound can be switched  
back on by pressing this button  
again or one of the VOLUME + or –  
buttons.  
SLEEP  
SLEEP  
120  
To set the TV/DVD to turn off after a  
preset amount of time, press SLEEP  
on the remote control. The clock will  
count down 10 minutes for each press  
of SLEEP (120, 110, ...10, 0). After the  
sleep time is programmed, the display  
will appear briefly every ten minutes  
to remind you that the sleep timer is  
operating. To confirm the sleep timer  
setting, press SLEEP and the remain-  
ing time will be displayed for a few sec-  
onds.To cancel the sleep timer, press  
SLEEP repeatedly until the display  
turns to 0.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed caption  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning  
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.  
Captions: This Closed Caption Mode will display text on the  
screen in English or another language (depending on the set-  
ting of the Closed Captions CH 1/2).  
Generally, Closed Captions in English are transmitted on Cap-  
tions Channel 1 and Closed Captions in other languages are  
transmitted on Captions Channel 2.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Text: The Text Closed Caption Mode will usually fill the screen  
with a programming schedule or other information.  
After selecting a Closed Caption Mode, it will stay in effect until it  
is changed, even if the channel is changed.  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
If the Captions signal is lost due to a commercial or a break in  
the signal, the Captions will reappear when the signal is received  
again. If the channels are changed, the Captions will be delayed  
approximately 10 seconds. The Captions will appear in places  
on the screen where they will least interfere with the picture,  
usually on the bottom of the screen. News programs will usually  
show three-line Closed Captions which scroll onto the screen.  
Most other shows provide two or three lined Captions placed  
near the character who is speaking so the viewer can follow the  
dialogue. Words in italics or underlined describe titles, words in  
foreign languages or words requiring emphasis. Words that are  
sung usually appear enclosed by musical notes.  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
VOL –  
VOL +  
ENTER  
RETURN  
For television programs broadcasting with Closed Captions, look  
in your TV guide for the Closed Captions symbol (CC).  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
TO VIEW CLOSED CAPTIONS  
Press CLOSED CAPTION to  
switch between normal TV and the  
two closed caption modes (cap-  
tions and full screen text). Closed  
captioning will display text on the  
screen for hearing impaired  
viewers.  
NOTES:  
When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.  
If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with  
Closed Captioning, especially with live programs. This is because during live programs, captions are also  
entered live. These transmissions do not allow time for editing.  
When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may  
interfere with Closed Captions.  
Some cable systems and copy protection systems may interfere with the Closed Captioned signal.  
If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or  
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception  
or use an outdoor antenna.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next  
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-  
grammed into the TV/DVDs memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up  
to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.  
When shipped from the factory, this menu option is in the CATV mode.  
TV/CATV SELECTION  
Press MENU in the TV mode.  
The TV menu screen will appear.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
menu appears.  
or  
until the SET UP  
2
3
1
4
2
5
8
3
6
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
/
/
/
/MENU  
<
>
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
CATV.  
or  
to select the TV/  
TV/CATV  
ADD/DELETE  
CATV  
ADD  
AUTO CH MEMORY  
CH +  
/
/
/
/MENU  
<
<
>
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
Press  
or CATV mode.  
or  
to select the TV  
4
5
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
TV  
ADD  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
TV - VHF/UHF channels  
CATV - CABLE TV channels  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
/
/
/
/MENU  
>
Press MENU until the MENU  
screen is cleared.  
CATV CHART  
The chart below is typical of many cable system channel allocations.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
(Continued)  
AUTOMATIC MEMORY TUNING  
Press MENU in the TV mode. The TV menu  
screen will appear.  
1
2
Press  
appears.  
or  
until SET UP menu  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/
/
/
/MENU  
<
>
Press  
or  
to select the AUTO  
3
1
4
2
5
8
3
6
CH MEMORY, then press  
or  
.
The TV will begin memorizing all the  
channels available in your area.  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
/
/
/
/MENU  
<
>
Press MENU until the MENU screen  
is cleared.  
0
4
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
TO ADD/DELETE CHANNELS  
Select the desired channel to be  
memorized or deleted using Direct  
Channel Selection (0-9), or CH + or .  
1
CH +  
VOL –  
VOL +  
ENTER  
Press MENU. The TV menu  
screen will appear.  
2
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
3
4
5
Press  
appears.  
or  
until SET UP menu  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
/
/
/
/MENU  
<
>
Press  
DELETE.  
or  
to select the ADD/  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
>
Press  
or  
to select ADDor  
DELETE, whichever function you  
want to perform.  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
DELETE  
/
/
/
/MENU  
<
Press MENU until the MENU screen  
is cleared.  
6
7
Repeat steps 1-6 for other channels  
you want to add or delete.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
An age limitation can be set to forbid children to watch programs according to "TV RATING" and  
"MOVIE RATING".To use the V-Chip function, you must register a password.  
TO REGISTER PASSWORD  
Press MENU in the TV mode. The TV menu  
screen will appear.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
2
Press  
menu appears.  
or  
until the OPTION  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
1
4
2
5
8
3
6
/
/
/
/MENU  
<
<
>
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
Press  
or  
to select the V-  
3
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
CHIP SET, then press  
or  
.
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/
/
/
/MENU  
>
CH +  
VOL –  
VOL +  
ENTER  
Enter the password (4 digits)  
4
5
using Direct Channel Selection  
(0-9), then press ENTER.  
If you put a wrong number,  
press CANCEL.  
RETURN  
CH –  
V-CHIP SET  
NEW  
PASSWORD  
:
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
0
9/ENTER/CANCEL/MENU  
<
>
SKIP  
" " appears instead of the number.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Enter the same password again  
for the safety, then press ENTER.  
Now the password was registered  
and V-Chip setting menu will  
appear on the display.  
V-CHIP SET  
CONFIRM  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
NOTES:  
If you forget the password, you can-  
not set the V-Chip.  
To avoid forgetting the password, write  
it down and keep in the safe place.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
(Continued)  
TO SET THE V-CHIP  
In the V-CHIP SET menu, press  
1
or  
to select the TV  
RATING.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
desired setting.  
OFF  
TV-Y :  
TV-Y7 :  
TV-G :  
TV-PG:  
TV-14 :  
TV-MA:  
or  
to display the  
2
1
4
2
5
8
3
6
:
TV RATING is not set  
All children  
7 years old and above  
General Audience  
Parental guidance  
14 years old and above  
17 years old and above  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press  
RECALL to show the contained rating. Press  
/
or  
/
to select the desired item you want.  
CH +  
Press  
MOVIE RATING.  
or  
to select the  
3
4
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Press  
rating.  
or  
to select desired  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
OFF  
G
PG  
:
:
:
MOVIE RATING is not set  
All ages  
Parental guidance  
PG-13 : Parental guidance  
less than 13 years old  
R
:
Under 17 years old  
Parental guidance suggested  
NC-17 : 17 years old and above  
X
:
Adult only  
Press  
CHIP.  
or  
to select V-  
5
6
7
To use after the TV is protected  
When the program applied to the V-  
Chip setting is received, enter the  
password. Protection can be can-  
celled.  
Press  
or  
to Display ON.  
Now your settings were set into  
the memory.  
NOTE:  
The V-Chip function is activated only  
on programs and tapes that have the  
rating signal.  
Press MENU until the MENU  
screen is cleared.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO CHANGE PASSWORD  
Press MENU in the TV mode. The TV menu  
screen will appear.  
1
2
Press  
or  
until OPTION  
menu appears.  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/
/
/
/MENU  
<
>
1
4
2
5
8
3
6
Press  
CHIP SET, then press  
or  
to select the V-  
3
or  
.
OPEN/CLOSE  
MUTE  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
/
/
/
/MENU  
<
>
TOP MENU  
SUBTITLE  
AUDIO  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Enter the Password using Direct  
Channel Selection (0-9), then  
press ENTER.  
If you put a wrong number,  
press CANCEL.  
4
5
6
V-CHIP SET  
PASSWORD  
CH +  
:
VOL –  
VOL +  
0
9/ENTER/CANCEL/MENU  
<
>
RETURN  
ENTER  
CH –  
Press  
CHANGE PASSWORD, then  
press or  
or  
to select  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
.
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Enter the new password using  
Direct Channel Selection (0-9),  
then press ENTER.  
Enter the same password again  
for safety, then press ENTER.  
7
8
Press MENU repeatedly to  
return to normal screen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture control adjustment  
Picture controls are factory preset but you can adjust them individually as follows:  
Press MENU in the TV mode. The TV menu  
screen will appear.  
1
Press  
or  
until PICTURE  
2 menu appears.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
0
+32  
0
0
0
1
4
2
5
8
3
6
/
/
/
/MENU  
<
<
>
OPEN/CLOSE  
MUTE  
Press  
you want to adjust.  
or  
to select the item  
7
SLEEP  
9
3
4
CLOSED  
CAPTION  
0
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
0
+32  
0
0
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/
/
/
/CANCEL/MENU  
>
CH +  
Press  
setting.  
or  
to adjust the  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
increase brightness  
increase contrast  
be brilliant color  
decrease brightness  
decrease contrast  
be pale color  
BRIGHTNESS  
CONTRAST  
COLOR  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
be reddish color  
be greenish color  
makes picture softer  
TINT  
SHARPNESS  
SKIP  
makes picture clearer  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
After your desired setting press  
MENU until the MENU screen is  
cleared.  
5
CANCEL  
Pressing CANCEL while making picture adjustments will return all  
adjustments to the factory preset levels.  
NOTE:  
The CONTRAST default setting is set  
to maximum at the factory.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stereo and separate audio program (SAP)  
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly  
enhance TV viewing by bringing you programs with high fidelity stereo sound.  
MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to  
transmit a second language for bilingual transmission or for other purposes.  
LISTENING TO STEREO SOUND  
When the TV is turned on or a  
channel selection is made, make  
STEREO  
CH 013  
certain the STEREO appears on  
the screen. This means that  
"Stereo" broadcasting is avail-  
able. You can enjoy stereo  
sound from the left and right  
speakers.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
When "Mono" broadcasting is  
received, no indication is  
displayed.  
If the broadcast signal is not  
strong enough or clear stereo  
sound is not available, press  
AUDIO to change to mono  
sound. The noise should be  
eliminated. Press it again to  
return to the stereo sound.  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)  
VOL –  
VOL +  
ENTER  
When the TV is turned on or a  
channel selection is made, make  
RETURN  
STEREO SAP  
CH 013  
CH –  
certain the SAP appears on the  
screen. This means that the  
"Separate Audio Program"  
broadcasting is available.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
TO SELECT DESIRED SOUND  
Press AUDIO to select the  
desired sound.  
SEL. STEREO  
MONO+SAP BROADCASTING  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MONO)  
SAP SOUND  
STEREO+SAP BROADCASTING  
STEREO SOUND  
(MAIN)  
SAP SOUND  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MAIN)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
About this owners manual  
Playable discs  
This owners manual explains the basic instructions of  
this TV/DVD. Some DVD video discs are produced in a  
manner that allows specific or limited operation during  
playback. As such, the TV/DVD may not respond to all  
operating commands. This is not a defect in the TV/DVD.  
Refer to instruction notes of discs.  
This TV/DVD can play the following discs.  
Maximum  
Disc  
Disc Mark Contents  
Size  
playback time  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
video  
(moving  
may appear on the TV screen during operation.  
Approx. 8 hours  
(double sided disc)  
A “ ” means that the operation is not permitted by the  
TV/DVD or the disc at the moment.  
For example, it is unable to skip the playback of  
copyright message of the disc when the SKIP(  
button is pressed. Alternatively, the “ ” may also  
DVD  
video  
discs  
Approx. 80 minutes  
(single sided disc)  
pictures)  
)
8 cm  
Approx. 160 minutes  
(double sided disc)  
indicate that the feature is not available for the disc.  
Notes on region numbers  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
Audio  
+
video  
(moving  
The region number of this TV/DVD is 1. If region  
numbers, which stand for their playable area, are printed  
on your DVD video disc and you do not find  
disc playback will not be allowed by the player. (In this  
case, the TV/DVD will display a message on-screen.)  
VIDEO  
CDs  
ALL  
1
or  
,
DIGITAL VIDEO  
pictures)  
8 cm  
Approx. 74 minutes  
Approx. 20 minutes  
On VIDEO CDs  
12 cm  
Audio  
CDs  
Audio  
This TV/DVD supports VIDEO CDs equipped with the  
PBC (Version 2.0) function. (PBC is the abbreviation of  
Playback Control.) You can enjoy two playback  
variations depending on types of discs.  
8 cm  
(CD  
single)  
The following discs are also available.  
CD-R  
CD-RW  
VIDEO CD not equipped with PBC function  
(Version 1.1)  
Sound and movie can be played on this TV/DVD in the  
same way as an audio CD.  
CD-R/RW discs recorded by CD-DA method can be  
played. Some CD-R/RW discs may be incompatible.  
VIDEO CD equipped with PBC function  
(Version 2.0)  
You cannot play discs other than those listed above.  
You cannot play discs of DVD-RAM, DVD-RW, etc., or non  
standardized discs even if they may be labeled as above.  
ThisTV/DVD uses the NTSC color system, and cannot play  
DVD video discs recorded in any other color system (PAL,  
SECAM, etc.).  
In addition to operation of a VIDEO CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owners  
manual may not work with some discs.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation/Status display of disc  
The following pages describe the  
setup/operation in DVD mode.  
Preparation  
Before DVD/CD operation, please make preparations as follows.  
Insert the AC cord plug into a standard 120V 60Hz polarized  
AC outlet.  
If the AC cord plug is plugged in for the first time, wait for  
about 5 seconds before pressing POWER.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
NOTE: When connecting to other equipment, unplug the unit  
from the AC outlet.  
1
4
2
5
8
3
6
Press POWER on the unit or on the remote control to turn on  
2
OPEN/CLOSE  
MUTE  
the unit. The POWER indicator will light.  
Every time you press POWER, the TV/DVD starts from TV  
mode.  
7
SLEEP  
9
CLOSED  
CAPTION  
0
When using an amplifier, switch on the amplifier.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Press TV/DVD to select DVD  
mode.  
The DVD startup screen will ap-  
pear on the screen.  
3
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
welcome  
CH +  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
Status display of disc  
Press RECALL.The status display of the disc will appear on the  
screen.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
DVD  
SKIP  
Title number  
Title elapsed playing time  
Chapter number Title total time  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Disc operation  
1/8  
C
1/19  
T
0:07:18 2:02:31  
1/8 Eng 1/1  
Camera angle  
1/8 Eng DolbyDigital  
Subtitle language  
Audio language  
A kind of audio  
To make status display disappear, press RECALL again.  
Audio CD/Video CD  
PBC (PlayBack Control) on Video CD  
Track elapsed playing time  
NOTE:  
Disc operation  
PBC  
1 / 8  
If the unit does not operate properly:  
Static electricity, etc., may affect the play-  
er's operation. Disconnect the AC power  
cord once, then connect it again.  
Track total time  
T
0:02:31 0:53:09  
Track number  
Play list  
Playlist  
1
2
3
4
5
6
7
8
When you play the CD disc, the status display will appear  
on the screen and continue displaying.  
When you play the Video CD, Play list will not appear on the  
screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback procedure  
Press OPEN/CLOSE on  
the unit or the remote con-  
trol.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
The disc tray will open.  
1
4
2
5
8
3
6
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
Place a disc onto the tray.  
Position it with the printed  
label side up, align it with  
the guides, and place it in  
its proper position.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
2
3
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
VOL –  
VOL +  
ENTER  
Press OPEN/CLOSE or  
PLAY.  
The disc tray closes auto-  
RETURN  
CH –  
matically.  
TheTV-screen,  
to “ ” and then playback  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
changes  
SKIP  
commences.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
A menu screen will  
appear on the TV screen,  
if the disc has a menu  
feature.  
NOTES:  
If a non-compatible disc is loaded, Incor-  
rect Disc, Region Code Erroror Paren-  
tal Errorwill appear on theTV screen ac-  
cording to the type of loaded disc. If these  
appear, check your disc again (see pages  
24 and 35).  
Some discs may take a minute or so to  
start playback.  
When you set a single-faced disc label  
downwards (ie. the wrong way up) and  
press PLAY or OPEN/CLOSE on the unit,  
Press  
/
or  
/
to make a selection.  
4
5
Press ENTER.  
Title is selected and play commences.  
will appear on the display for 3 about  
seconds and then No Discwill be dis-  
played.  
Press STOP to end playback.  
6
The unit memorizes the stopped point, depending on the  
disc. “ ” appears on the screen. Press PLAY to resume  
playback (from the scene point).  
If you press STOP again or unload the disc (“ ” appears  
on the screen.), the unit will clear the stopped point.  
Some playback operations of DVDs may  
be intentionally fixed by software produc-  
ers. Since this unit plays DVDs according  
to the disc contents the software produc-  
ers designed, some playback features may  
not be available. Also refer to the instruc-  
tions supplied with the DVDs.  
When playing DTS-encoded Audio CDs,  
excessive noise will be heard from the  
analogue stereo outputs. To avoid possi-  
ble damage to the audio system, the con-  
sumer should take proper precautions  
when the analogue stereo outputs of the  
DVD player are connected to an amplifi-  
cation system.  
To stop the playback, press STOP.  
Then press OPEN/CLOSE.  
The disc tray opens.  
Remove the disc and press OPEN/CLOSE then press  
POWER.  
The disc tray closes automatically and unit turns off.  
7
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special playback  
Note: There may be a slight delay be-  
tween when you press the button and  
the function activating.  
Fast Forward Playback  
Press FWD during normal playback.  
Each press of the FWD button will increase the speed of the  
search  
(CD:  
(x 2),  
(x 2),  
(x 4),  
(x 4),  
(x 8),  
(x 8),  
(x 15).  
(x 20))  
To resume normal playback, press PLAY.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Review Playback  
Press REV during normal playback.  
Each press of the REV button will increase the speed of the  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
search  
(CD:  
(x 2),  
(x 2),  
(x 4),  
(x 4),  
(x 8),  
(x 8),  
(x 15).  
(x 20))  
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
To resume normal playback, press PLAY.  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Still Playback  
Press PAUSE during normal  
CH +  
playback to pause playback.  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
To resume normal playback,  
press PLAY.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Frame Advance  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Press PAUSE during still playback.  
One frame is advanced each time you press PAUSE.  
To resume normal playback, press PLAY.  
Slow-motion Playback  
Press SLOW  
(
)
Reverse or SLOW  
(
)
Forward during  
normal playback or still playback.  
Each press of SLOW will change the speed of the slow x1/2,  
x1/4, x1/6, x1/8.  
To resume normal playback, press PLAY.  
To resume the still playback, press PAUSE.  
NOTE:  
The unit is capable of holding a still video  
image or On screen display image on your  
television screen indefinitely. If you leave  
the still video image or On screen display  
image displayed on your TV for an ex-  
tended period of time, you risk permanent  
damage to your television screen. Pro-  
jection televisions are very susceptible.  
Locating a chapter or track  
Press SKIP(  
) Forward or SKIP(  
) Reverse during  
playback to locate a chapter that you want to watch.  
Each time you press the button, a chapter or track is  
skipped.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming/Locating desired scene  
Zooming  
This unit will allow you to zoom in on the frame image. You  
can then make selections by switching the position of the  
frame.  
Press TV/DVD to select  
DVD mode.  
Press ZOOM during play-  
back.  
1
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
The center part of the  
image will be zoomed in.  
Each press of ZOOM will  
1
4
2
5
8
3
6
change the ZOOM  
1
OPEN/CLOSE  
MUTE  
(x 2),  
(x 4).  
2 (x 3) and  
3
7
SLEEP  
9
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Press  
/
/
/
to view a different part of the frame.  
2
3
You may move the frame from the centre position to UP,  
DOWN, LEFT or RIGHT direction.  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
In the zoom mode press ZOOM repeatedly to return to a  
1:1 view (  
Off).  
CH +  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
Locating Desired Scene  
Use the title, chapter and time recorded on the disc to  
locate the desired point to play back.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press JUMP during play-  
back.  
1
Jump  
C
T
SLOW  
PAUSE  
SLOW  
REPEAT AB  
_ _ / 19  
1 / 8  
2:02:31 / 2:02:31  
/Enter/0 9/Cancel/Jump  
Press  
Track)or “  
or  
to select the “  
(Time).  
C
(Chapter), “  
T
(Title/  
2
3
Press Number buttons (09) to input the number.  
NOTES:  
You can select the Pause, Slow or  
Search playback in the zoom mode.  
Some discs may not respond to zoom  
feature.  
If you input a wrong number, press CANCEL.  
Refer to the package supplied with the disc to check the  
numbers.  
Press ENTER.  
4
Playback starts.  
When you change the title, playback starts from  
Chapter 1 of the selected title.  
Some discs may not work in the above operation.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat/Random/Program playback and Repeat A-B  
Press PLAY MODE during playback or stop mode.  
Each time you press PLAY MODE, playback mode changes as follows.  
DVD  
Audio CD/Video CD  
On screen  
display  
Title:  
On screen  
display  
Operation  
Operation  
Repeats entire disc.  
Repeats the current title.  
All:  
Track:  
Chapter: Repeats the current chapter.  
Repeats the current track.  
Off:  
Resumes normal playback.  
Random Play: Plays the tracks in random order.  
*Program:  
Plays the tracks in program order.  
During stop mode, PLAY MODE key is not effective.  
(Status display): Resumes normal playback.  
During stop mode, you can not select “  
Track.  
Random playback and Program playback do not  
function on the Video CD.  
*Program menu  
Program  
Use number buttons (09) to  
1
2
3
4
5
8
8:29  
8:54  
7:31  
enter the tracks number you  
want to program, then press  
ENTER. The track number and  
total time are displayed.Repeat  
this step to enter additional  
tracks.When you have finished  
entering tacks, press PLAY to  
start Program playback.  
3
__  
Total 3 0:25:14  
/Enter/0 9/Cancel/Play/PlayMode  
A playlist of your programmed  
tracks is displayed.  
NOTES:  
If you put a wrong number, press CANCEL.  
To cancel program play, press STOP 3 times.  
To clear the programs on the program menu, press CANCEL until all programs  
will be cleared.  
The program is cancelled when you open the disc tray or turn off the power.  
Repeat A-B  
Repeat A-B playback allows you to repeat material between two selected points.  
Press REPEAT A-B during playback.  
The start point is selected.  
1
A
Press REPEAT A-B again.  
2
A B  
The end point is selected. Playback starts at the point that you selected.  
Playback stops at the end point, returns to Point A automatically, then starts  
again.  
To resume normal playback press REPEAT A-B again.  
Offappears on the screen.  
NOTES:  
Some discs may not work with the repeat operation.  
In Repeat A-B mode, subtitles near point A or B may not appear.  
You may not be able to set Repeat A-B, depending on the scenes of the DVD.  
Repeat A-B does not work with interactive DVDs.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing soundtrack language/Subtitles  
Changing soundtrack language  
You can select the language when you play a multilingual  
disc.  
Press AUDIO during play-  
back.  
1
2/8 Fra Dolby Digital  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
The current soundtrack  
language will appear.  
1
4
2
5
8
3
6
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
Press AUDIO repeatedly  
until the desired language  
is selected.  
CAPTION  
2
0
1/8 Eng Dolby Digital  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
The on-screen display will  
disappear after a few sec-  
onds.  
CH +  
In case of video CD playback  
Audio type changes as follows each time you press ADUIO.  
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
LR  
L
R
NOTES:  
If the desired language is not heard af-  
ter pressing the SUBTITLE button sev-  
eral times, the language is not recorded  
on the disc.  
Changing soundtrack language is can-  
celled when you open the disc tray.The  
initial default language or available lan-  
guage will be heard if the disc is played  
back again.  
Subtitles  
Turning the Subtitles On and Off  
When playing back a disc recorded with subtitles, you  
can turn the subtitles on or off.  
Press SUBTITLE during play-  
back until Offappears.  
Off  
Changing subtitle language is cancelled  
when you open the disc tray or turn the  
power off.  
Some functions may not work on some  
DVDs.You may not be able to turn sub-  
titles on or off or change subtitles.While  
playing the DVD, the subtitle may  
change when:  
- you open or close the disc tray  
- you change the title.  
In some cases, the subtitle language is  
not changed to the selected one imme-  
diately.  
Changing the subtitle language  
You can select the language when playing back a disc  
recorded with multi-lingual subtitles.  
Press SUBTITLE repeat-  
edly during playback until  
your desired language ap-  
pears.  
1
1/32 Eng  
The on-screen display will disappear after a few seconds.  
2
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles/Title selection/DVD menu  
Changing Angles  
When playing back a disc recorded with multi-angle facil-  
ity, you can change the view angle.  
Press ANGLE during play-  
back.  
1
1/9  
RECALL  
TV/DVD  
POWER  
The current angle will ap-  
pear.  
INPUT SELECT  
1
4
2
5
8
3
GAME  
6
OPEN/CLOSE  
7
SLEEP  
9
CLOSED  
MUTE  
CAPTION  
Press ANGLE repeatedly until the desired angle is selected.  
2
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Title Selection  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Two or more titles are recorded on some discs. If the title  
menu is recorded on the disc, you can select the desired  
title.  
CH +  
Press TOP MENU during playback.  
Title menu appears on the screen.  
1
VOL –  
VOL +  
RETURN  
SELECT/ENTER  
CH –  
Press  
/
or  
/
to select the desired title.  
2
3
Press ENTER or PLAY.  
The playback of the selected title will start.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
DVD Menu  
Some DVDs allow you to select the disc contents using the  
menu.  
When you play back these DVDs, you can select the sub-  
title language and sound-track language,etc. using the  
DVD menu.  
Press DVD MENU during playback.  
The DVD menu appears on the screen.  
1
Press DVD MENU again to resume playback at the scene  
when you pressed DVD MENU.  
NOTES:  
Press  
/
or  
/
to select the desired item.  
Depending on the DVD, you may not be  
able to change the angles even if multi-  
angles are recorded on the DVD.  
Depending on the DVD, you may not be  
able to select the title.Depending on the  
DVD, a title menumay simply be called  
a menuortitlein the instructions sup-  
plied with the disc.  
2
3
Press ENTER.  
The menu continues to another screen. Repeat steps 2  
and 3 to set additional items if any.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting language  
You can change the default settings  
to customise performance to your  
preference.  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode.  
1
2
3
Main Menu  
Language  
Picture  
Sound  
Press  
or  
to select  
Parental  
Language, then press  
or ENTER.  
/Enter/Setup/Return  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
or  
to select  
1
4
2
5
8
3
6
OSD Language, then  
press  
or ENTER.  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
or  
to select de-  
OSD Language  
sired language (e.g. Eng-  
lish), then press ENTER.  
The menu returns to Lan-  
guagemenu automatically.  
English  
Francais  
Espanol  
CH +  
VOL –  
VOL +  
ENTER  
/Enter/Setup/Return  
If you want to return to the  
previous menu, press  
or RETURN.  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Repeat steps 2-3 for other Languagesetting.  
4
5
SKIP  
Other Selection: (Menu/Audio/Subtitle)  
If you want to select another language, enter the language  
code (see the Language code list on page 38).  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Off: (subtitle)  
Subtitles do not appear.  
Press SETUP to remove the Menu screen.  
NOTES:  
If the selected soundtrack language is  
not recorded on the disc, the original  
language will be heard.  
If the selected subtitle language is not  
recorded on the disc, the first-priority  
language is selected.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the aspect ratio of TV screen/Setting on screen display  
Setting the aspect ratio of TV screen  
You can select the aspect ratio for your TV.  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode or No Disc.  
Main Menu  
1
Language  
Picture  
Sound  
Press  
or  
to select  
Parental  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Picture, then press  
or  
/Enter/Setup/Return  
ENTER.  
1
4
2
5
8
3
6
Press  
TV Screen, then press  
or ENTER.  
or  
to select  
2
3
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
Press  
or  
to select  
TV Screen  
0
your desired screen type,  
then press ENTER.  
16:9  
4:3  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
4:3  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
You have the following screen sizes to choose from:  
16:9 Wide screen  
Select this mode when connecting to a wide-screen TV.  
A wide screen picture is displayed full size.  
CH +  
4:3  
Letterbox  
VOL –  
VOL +  
ENTER  
Select this mode when connecting to a conventional TV.  
When playing back a wide screen-DVD disc, it displays the  
wide picture with black bands at the top and bottom of  
screen.  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
4:3  
Panscan  
It displays the wide picture on the whole screen with left  
SKIP  
and right edges automatically cut off.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
If you want to return to the previous menu, press  
or  
RETURN.  
Press SETUP to remove the Menu screen.  
4
Status on screen display  
On screen display can be switched on or off when you  
press the buttons.  
Press SETUP in the stop mode or No Disc.  
1
Press  
or  
to select Picture, then press  
or ENTER.  
Picture  
Press  
Display.  
or  
to select  
2
TV Screen  
Display  
16:9  
On  
NOTE:  
If the DVD disc is not formatted in the pan  
& scan style, it displays 4:3 style.  
Press  
select Onor Off.  
or ENTER to  
Picture  
3
TV Screen  
Display  
16:9  
Off  
On: On screen displays appear when you press the  
buttons (factory setting).  
Off: On screen displays do not appear when you press  
or any buttons.  
If you want to return to the previous menu, press  
or  
RETURN.  
33  
Press SETUP to remove the Menu screen.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Range Control  
DRC (Dynamic Range Control) ena-  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode.  
Main Menu  
Language  
1
bles you to control the dynamic range  
so as to achieve a suitable sound for  
your equipment.  
Picture  
Sound  
Press  
or  
to select  
Parental  
Sound.  
/Enter/Setup/Return  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Press  
lect DRC.  
or ENTER to se-  
Sound  
DRC  
2
3
On  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
/Enter/Setup/Return  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
lect Onor Off.  
or ENTER to se-  
Sound  
DRC  
Off  
CH +  
VOL –  
VOL +  
ENTER  
/Enter/Setup/Return  
RETURN  
CH –  
If you want to return to the previous menu, press  
or  
RETURN.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press SETUP to remove the Menu screen.  
4
SLOW  
PAUSE  
SLOW  
REPEAT AB  
NOTES:  
This function works only during play-  
back of Dolby Digital recorded discs.  
The level of Dynamic Range Reduction  
may differ depending on DVD video  
disc.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental control setting  
Some discs are specified not suitable  
for children. Such discs can be limited  
not to play back with the unit.  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode.  
1
Main Menu  
Language  
Picture  
Sound  
Press  
or  
to select  
Parental  
Parental, then press  
or  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
ENTER.  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press  
or  
to select  
Parental  
2
3
Parental Level, then press  
Password  
Parental Level  
Off  
Off  
or ENTER.  
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
CLOSED  
CAPTION  
0
Press  
or  
to select a  
Parental Level  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
level from Off or 18. Press  
or ENTER to set the se-  
lected level.  
Off  
1
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
2
3
4
5
/Enter/Setup/Return  
CH +  
VOL –  
VOL +  
ENTER  
Level Off: The parental control setting does not func-  
tion.  
Level 8: Almost all DVD software can be played back.  
Level 1: DVD software for adults cannot be played  
back.  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Select from the level 1 to level 8. The limitation will be  
more severe as the level number is lower.  
SKIP  
Press  
Password, then press  
or ENTER.  
or  
to select  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
4
5
6
Parental  
Password  
Parental Level  
Off  
1
Press number buttons (0–  
9) for the password.  
Dont forget the password.  
If you input a wrong  
number, press CANCEL.  
Password  
Password  
1234  
NOTES:  
Press ENTER to store the  
password.  
Note: Now the rating is  
locked and the setting can-  
not be changed unless you  
enter the correct password.  
Parental  
If each setup (P.3236) has been  
completed, the unit can always be  
worked under the same conditions  
(especially with DVD discs).  
Each setup will be retained in the  
memory when you turn the power off.  
Depending on the discs, the unit can-  
not limit playback.  
Some discs may not be encoded with  
specific rating level information though  
its disc jacket says adult.For those  
discs, the age restriction will not work.  
Password  
Parental Level  
On  
1
If you want to return to the previous menu, press  
or RETURN.  
Press SETUP to remove the parental control screen.  
7
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the parental level  
Press TV/DVD to select DVD mode.  
Press SETUP in the stop mode or No Disc.  
1
2
3
Press  
or  
to select Parental, then press  
or  
ENTER.  
Press  
Password, then press  
or ENTER.  
or  
to select  
Parental  
Password  
Parental Level  
On  
1
Press number buttons (0–  
9) to enter the password  
you have stored.  
Password  
Password  
____  
If you input a wrong number, press CANCEL.  
Press ENTER.  
The password is now Off.  
Parental  
4
5
Password  
Parental Level  
Off  
1
Press  
Parental Level. Then  
press or ENTER. The  
or  
to select  
Parental  
Password  
Parental Level  
Off  
1
Parental Level screen is dis-  
played.  
Press  
or  
to select a  
6
level from Off or 18 and  
then press  
or ENTER.  
Press  
or  
to select  
Parental  
7
8
Passwordand then press  
Password  
Parental Level  
Off  
8
or ENTER.  
Press number buttons (0–  
9) to enter a 4-digit pass-  
word.  
Password  
Password  
1234  
NOTE:  
Do not forget the password. If you forget  
the password, contact the dealer that you  
purchased the unit from.  
Note: You can enter a new password.  
Press ENTER.  
The parental level is now  
changed and locked.  
Parental  
9
Password  
Parental Level  
On  
8
If you want to return to the previous menu, press  
or  
RETURN.  
Press SETUP to remove the parental control screen.  
10  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temporary disabling of rating level by DVD disc  
Depending on the DVD disc, the disc  
Load a DVD disc and press  
1
may try to temporarily cancel the  
PLAY (see page 26).  
rating level that you have set.  
It is up to you to decide whether to  
cancel the rating level or not.  
If the DVD disc has been designed to temporarily cancel  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
2
the Rating level, the screen which appears after inserting  
a DVD will change, depending on which disc is played. If  
you select YESwith the ENTER key, Your disc exceeds  
the parental control level.screen will then appear.  
1
4
2
5
8
3
6
OPEN/CLOSE  
MUTE  
7
SLEEP  
9
Your disc exceeds the parental control level.  
Password  
CLOSED  
CAPTION  
____  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Enter/09/Cancel/Return  
SETUP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
If you wish to cancel the set rating level temporarily, enter  
the 4-digit password.  
Then press ENTER.  
Alternatively, if the password has not been set, playback  
will commence. If you dont know (or have forgotten) the  
password, select STOP.  
The setting screen will disappear. Press OPEN/CLOSE to  
remove the disc.  
CH +  
3
4
VOL –  
VOL +  
ENTER  
RETURN  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
To quit entering, press RETURN.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Playback will commence if the entered password was cor-  
rect.  
NOTE:  
This temporary cancellation of rating level  
will be kept until the disc is ejected.  
When the disc is ejected, the original rating  
level will be set again automatically.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language code list  
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"  
(see page 32).  
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese 2919  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2921  
2922  
2925  
1529  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
2322 Sundanese 2931  
Armenian  
Assamese  
Aymara  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
Azerbaijani  
Bashkir  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
2629 Tonga  
1611 Turkish  
2622 Turkmen  
2630 Twi  
Breton  
1929 Panjabi  
1924 Pashto, Pushto  
1911 Persian  
1711 Polish  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese 3219  
2923 Volapük  
2911 Welsh  
1714 Wolof  
2928 Xhosa  
2918 Yiddish  
2924 Yoruba  
2914 Zulu  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian  
2211 Shona  
1625 Latvian, Lettish 2232 Sindhi  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable  
TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV/DVD is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST  
or BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipments  
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-  
ent on the model and features of each component. Check the Owner's Manual provided with each component  
for the location of video and audio inputs and outputs.  
Using an AV Amplifier with built-in digital surround  
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems  
including Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as  
shown below.  
Front  
Speaker  
(Right)  
Subwoofer  
Rear of TV/DVD  
TV/DVD  
Front  
Speaker  
(Left)  
Coaxial Digital  
Audio Output  
Center Speaker  
Coaxial digital cable (not supplied)  
To Coaxial Digital Audio Input  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround  
decoder as listed above  
*
*
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
DTSand DTS Digital Outare trademarks of Digital Theater Systems, Inc.  
NOTES:  
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV  
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be  
damaged.  
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.  
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the audio/video inputs  
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.  
NOTE:  
Press INPUT SELECT repeatedly to select the desired mode.  
LINEor TV channel will display on the screen for 4 seconds.  
In the DVD mode this key will not  
operate.  
LINE  
1. To connect the TV/DVD to a VCR  
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.  
Operate your VCR as usual.  
VCR  
Front of TV/DVD  
VIDEO IN  
AUDIO IN (R)  
AUDIO IN (L)  
To Audio/Video  
OUT  
2. To connect the TV to a camcorder  
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.  
Camcorder  
Front of TV/DVD  
VIDEO IN  
To Audio/Video OUT  
AUDIO IN (R)  
AUDIO IN (L)  
Audio/Video cord (not supplied)  
3. To connect the TV to a TV Game  
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.  
1. Connect a TV Game  
Front of TV/DVD  
VIDEO IN  
AUDIO IN (R)  
To Audio/Video OUT  
AUDIO IN (L)  
Audio/Video cord (not supplied)  
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.  
Game timer function: After one hour the Game timer display will appear every 30  
minutes for about 5 seconds showing how long the time has passed up to 4 hours.  
NOTES:  
You can also change the TV screen to LINE by pressing INPUT SELECT. But this screen is normal.  
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different  
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included  
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer  
or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
POWER  
Make sure the power cord is plugged in.  
Try another AC outlet.  
Power is off, check fuse or circuit breaker.  
Unplug unit, then plug it back in.  
10  
TV/DVD does not operate.  
TV BROADCAST RECEPTION  
Station or CATV experiencing problems, tune to another station. 14  
Poor sound or No sound  
Check Volume adjustments.  
Check for sources of possible interference.  
14  
39  
14  
11,12  
39  
Station or CATV experiencing problems, tune to another station.  
Check antenna or CATV connections, reorient antenna.  
Check for sources of possible interference.  
Poor picture or No picture  
22  
Check picture control adjustments.  
Station or CATV experiencing problems, tune to another station. 14  
Station signal is weak, reorient antenna to receive weaker station. 11,12  
Poor reception on some channels  
Check for sources of possible interference.  
39  
Station or CATV experiencing problems, tune to another station. 14  
Make sure channels are set into memory.  
Check picture control adjustments.  
18  
22  
Poor color or no color  
Check antenna or CATV connections, reorient antenna.  
Check for sources of possible interference.  
11,12  
39  
14  
18  
Station or CATV experiencing problems, tune to another station.  
Make sure channels are set into memory.  
CATV company is scrambling signal.  
Check antenna orientation.  
Check all CATV connections.  
Picture wobbles or drifts  
No CATV reception  
11  
12  
17  
14  
Set TV/CATV menu option to the CATV mode.  
Station or CATV system problems, try another station.  
Horizontal or diagonal bars on  
screen  
Check antenna connections, reorient antenna.  
Check for sources of possible interference.  
11,12  
39  
Make sure TV/CATV menu option is in the appropriate mode.  
If using antenna, check UHF antenna connections.  
17  
11  
No reception above channel 13  
No broadcast on station tuned.  
Sleep Timer is set.  
Power interrupted.  
18  
15  
TV shuts off  
TV station experiencing problems or program tuned is not closed  
14  
captioned. Try another channel.  
Check CATV connection or VHF/UHF antenna, reposition or ro- 11,12  
tate antenna.  
Closed - Caption is not activated.  
Press CLOSED CAPTION button to turn on the closed caption  
decoder.  
16  
13  
Display is not shown in your  
language.  
Select proper language in the menu options.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
No disc is inserted.  
The disc may be dirty. Clean up the disc.  
The unit cannot play CD-ROMs, etc.  
26  
6
Playback doesnt start.  
No picture  
TV/DVD selector is not set correctly.  
25  
Check the input selector of the amplifier is set properly.  
The unit is in the Special playback mode.  
Select the correct Audio Output position on AV amplifier.  
27  
40  
No sound  
Picture is distorted during CUE or The picture will be distorted occasionally.  
REVIEW.  
Stopping playback, search, slow-  
motion play, repeat play, or  
program play, etc. cannot be  
performed.  
Some discs may not do some of the functions.  
No 4:3 (16:9) picture  
No on-screen display  
No surround sound  
The setup does not match your TV.  
Select Display On.  
33  
33  
40  
The setup does not match your stereo system.  
The unit or remote operation key  
is not functioning.  
Turn off the unit and unplug the AC power cord for several min-  
utes, then replug it.  
Playback does not start when the  
title is selected.  
Check the RATING LEVEL setup.  
35~37  
Audio soundtrack and/or subtitle  
language is not changed when  
you play back a DVD.  
Multilingual language is not recorded on the DVD disc.  
32  
Some discs have no subtitles.  
Subtitles are cleared. Press SUBTITLE.  
No subtitle  
30  
Angle cannot be changed.  
Multi-angles are not recorded on the DVD disc.  
31  
appears on the screen.  
The function is prohibited with the unit or the disc.  
REMOTE CONTROL  
Aim at the remote control at the remote sensor.  
Operate within Approx. 5 Meters or reduce the light in the room.  
Clear the path of the beam.  
The batteries are weak. Replace the batteries.  
Check the batteries are inserted correctly.  
The remote control does not  
function.  
10  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
Power supply:  
Power consumption:  
AC 120V 60Hz  
Operation: 75W  
Standby: 5W  
Weight:  
24.3lbs (11.0 kg)  
Dimensions:  
Width: 14-1/4 inches (362 mm)  
Height: 15-1/16 inches (382 mm)  
Depth: 14-3/8 inches (365 mm)  
5° - 40°C  
Operating temperature:  
Operating humidity:  
Less than 80%  
TELEVISION  
Picture tube:  
Type 13 (335 mm diagonal)  
Tuner type:  
Quartz PLL Frequency Synthesized  
Receiving channels:  
VHF  
2-13  
UHF 14-69  
CATV14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
Antenna input:  
Speaker:  
Audio output power:  
VHF/UHF In 75 ohm coaxial  
1-1/2" x 2-11/16" (38 mm x 68 mm), 8 ohm x 2  
1.5W + 1.5W  
DVD/CD player  
Signal system:  
Applicable disc:  
NTSC  
1. DVD (12cm, 8cm)  
2. CD (12cm, 8cm)  
Audio characteristics:  
Frequency response:  
Input:  
DVD: 4Hz - 22KHz  
CD: 4Hz - 20KHz  
Video :(RCA) 1 Vp-p/75ohm  
Audio :(RCA) 8 dB/50Kohm  
0.5Vp-p 75ohms terminated  
CD :Wavelength: 775 - 815 nm  
Maximum output power: 0.5 mW  
DVD :Wavelength: 650 - 666 nm  
Maximum output power: 2.0 mW  
Digital audio out:  
Pickup:  
ACCESSORIES:  
Remote control x 1  
Batteries (2 x AAA)  
300 - 75 ohm Matching Transformer  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION  
AND DVD/CD PLAYER  
Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited  
warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set  
as a gift from the original consumer purchaser and to no other purchaser or transferee .  
Limited Ninety (90) Day Warranty  
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of  
ninety (90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective  
product or part, without charge to you.You must deliver the entire set to an Authorized TACP/THI Service  
Station.You pay for all transportation and insurance charges for the set to and from the Service Station.  
Limited One (1)Year Warranty  
TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of  
one year after the date of original retail purchase. During this period TACP/THI will replace a defective part  
without  
charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail  
purchase  
you pay labor charges involved in the replacement.You must also deliver the entire product to a TACP/THI  
Authorized Service Station.You are responsible for all transportation for the set to and from the Service Station.  
Limited Two (2)Year Warranty of Picture Tube  
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a  
period of two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a  
defective picture tube without charge to you except that if a defective picture tube is replaced after ninety (90)  
days from the date of the original retail purchase, you pay labor charges involved in the replacement.You are  
responsible for all charges involved in the replacement. you are responsible for all transportation and insurance  
charges for the set to and from the Service Station.  
Rental Units  
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental  
firm, whichever comes first.  
Commercial Units  
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture  
tube.  
Owner's Manual and Demographic Card  
You should read this owner's manual thoroughly before operating this product.You should complete and mail the  
enclosed Demographic card within ten days after you, or the person who has given you this product as a gift,  
purchased this product. This is one way to enable TACP/THI to provide you with better customer service and  
improved products. Failure to return the Demographic card will not affect your rights under this warranty.  
Your Responsibility  
The above warranties are subject to the following conditions:  
( 1 ) You must retain your bill of sale or provide other proof of purchase.  
( 2 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.  
( 3 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.  
( 4 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair  
of  
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna sys-  
tems are your responsibility.  
( 5 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any  
product or parts which have been lost or discarded by you or to damage to products or parts caused by  
misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power,  
improper installation, improper maintenance or use in violation of instructions furnished by us; or to units  
which have been altered or modified without authorization of TACP/THI .  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION  
AND DVD/CD PLAYER  
How to Obtain Warranty Service  
If after following all of the operating instructions in this manual and checking the section "Problems and  
troubleshooting" and you still find that service is needed;  
( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find  
the nearest Toshiba Authorized Service Station.  
( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.  
"TACP/THI Authorized Service Station personnel will come to your home when warranty service is  
required. Depending on the type of repair required, the service will either be performed in your  
home or the set will be taken to the TACP/THI Authorized Service Station for repair and returned to  
your home at no cost to you"  
In the Continental United States contact:  
In Hawaii Contact:  
Toshiba Hawaii, Inc  
327 Kamakee Street,  
Honolulu, Hawaii 96814  
(808) 591-8377  
Toll Free  
1-800-631-3811  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular  
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any  
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warran-  
ties,  
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replace-  
ment of  
any parts. In no event shall TACP or THI be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-  
tion of TACP or THI arising under this warranty or under any statute, or law of the United States or any state  
thereof, is here by limited to 90 days from the date you discover or should have discovered, the defect. This  
limitation does not apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to  
state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be  
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not  
apply to you.  
ATTENTION CANADIAN CONSUMERS:  
Canadian consumers are requested to complete the special Canadian "Warranty Registration  
Form" enclosed, and forward this completed form with a copy of bill of sale to TOSHIBA OF  
CANADA to "Register and Validate" their warranty.  
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.  
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.  
Rev. 09-01-98  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
J5E60301A U  
03/01  
Printed in Thailand  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toastmaster Double Oven CO36 User Manual
Tokina Camera Accessories TC0412DC User Manual
Toshiba Computer Drive MK4008GAH User Manual
Traulsen Freezer Traulsen Quality Refrigeration User Manual
Troy Bilt Blower 769 06521 P00 User Manual
Uniden Cordless Telephone ANA9620 User Manual
Universal Remote Control Universal Remote UR P95TVE User Manual
Univex CRT Television 21PT6441 User Manual
ViewSonic Digital Photo Frame VFD1028W11 User Manual
Vizio Projection Television M420NV User Manual