Toshiba TV DVD Combo MD13M1 User Manual

COMBINATION 13" COLOR TELEVISION AND  
DVD/CD PLAYER  
Owner’s Manual  
MD13M1  
DIGITAL VIDEO  
ATTENTION  
For your protection in the event of theft or loss of this product, please fill in the  
information listed below which is for your own personal records.  
Date of Purchase  
Serial No.  
:
:
:
Place of Purchase  
TV/CATV MODE SELECTION  
When shipped from the factory, the TV/CATV menu option is set to the  
“CATV”(Cable Television) mode.  
If not using CATV, set this menu option to the “TV” position.  
Before operating the unit, please read this manual thoroughly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning the exterior cabinet only.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
8A. An appliance and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation,  
and to ensure reliable operation of the unit, and to protect it from overheating.  
S3126A  
These openings must not be blocked or covered. The openings should never be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat  
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have been adhered to.  
10. POWER SOURCES  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not  
sure of the type of power supply to your home, consult your appliance dealer or local power company. For  
units intended to operate from battery power, or other sources, refer to the respective pages on this  
Owner's Manual for their operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be  
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into  
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the  
outlet, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the grounding-type plug.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
(Continued)  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,  
as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
For example:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
21. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
22. DISC TRAY  
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.  
23. CONNECTING  
When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
24. SOUND VOLUME  
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  
sound may cause hearing or speaker damage.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
25. SOUND DISTORTION  
Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.  
26. HEADPHONES  
When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-  
ously with high volume sound, it may cause hearing damage.  
27. LASER BEAM  
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the  
laser beam. It may cause sight damage.  
28. DISC  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
29. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD  
IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on discs  
Structure of disc contents  
On handling discs  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. VIDEO CDs and  
AUDIO CDs are divided into tracks.  
Do not touch the playback side of the disc.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
VIDEO CD/AUDIO CD  
VIDEO CD/AUDIO CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Each title, chapter or track is assigned a number, which  
is called “title number”, “chapter number” or “track  
number” respectively.  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
There may be discs that do not have these numbers.  
Notes on copyright  
It is forbidden by law to copy, broadcast, show,  
broadcast on cable, play in public, and rent copyrighted  
material without permission.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
This device does not tape-record copy protected DVD  
Video Discs.  
The device is not to be used for copying copyrighted  
content without the express written permission of the  
copyright owner.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
Obtaining such permission is the sole responsibility of  
the user.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Before using your unit  
IMPORTANT SAFEGUARDS .............................................. 3  
Notes on discs...................................................................... 6  
Contents ............................................................................... 7  
Parts and functions .............................................................. 8  
Remote control ..................................................................... 9  
Power source ..................................................................... 10  
Antenna connections.......................................................... 11  
Cable TV connections ........................................................ 12  
TV operation  
Setting the language .......................................................... 13  
TV operation....................................................................... 14  
Closed caption ................................................................... 16  
To memorize channels ....................................................... 17  
Setting the V-Chip .............................................................. 19  
Picture control adjustment.................................................. 22  
Stereo and separate audio program (SAP) ........................ 23  
Sound control adjustment .................................................. 24  
Playback operation  
Disc .................................................................................... 25  
Setting setup language ...................................................... 26  
Playback procedure ........................................................... 27  
Special playback ................................................................ 28  
Advanced Function  
Zooming/Locating desired scene ....................................... 29  
Repeat playback................................................................. 30  
Program playback/Random playback (CD/VCD) ............... 31  
Changing soundtrack language/Subtitles .......................... 32  
Changing angles/Title selection/DVD menu....................... 33  
Setting the aspect ratio of TV screen ................................. 34  
Setting on screen display/Status display of Disc ............... 35  
Dynamic Range Control ..................................................... 36  
Additional Information  
Parental control setting ...................................................... 37  
To change the parental level .............................................. 38  
Temporary disabling of rating level by DVD disc ................ 39  
Setting menu language ...................................................... 40  
Setting subtitle language .................................................... 41  
Setting audio soundtrack language.................................... 42  
Language code list ............................................................. 43  
Connections to other equipments ...................................... 44  
Problems and troubleshooting ............................................. 46  
Reception disturbances...................................................... 48  
Specifications ..................................................................... 49  
Warranty............................................................................. 50  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and functions  
Front  
AUDIO (L/R)/VIDEO IN jacks (LINE2)  
SKIP buttons  
VOLUME UP/DOWN buttons  
OPEN/CLOSE button  
Disc tray  
Power indicator  
POWER button  
Headphone Jack  
STOP button  
PLAY button  
Remote sensor  
CHANNEL UP/DOWN buttons  
Rear  
COAXIAL DIGITAL AUDIO OUT jack  
AUDIO (L/R)/ VIDEO OUT jacks  
AUDIO (L/R)/ VIDEO IN jacks (LINE1)  
SERVICE jack  
RF IN jack  
AC power cord  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Page  
RECALL  
Call TV information  
15  
35  
Call DVD information  
Switch between TV/AV and DVD  
Power On/Off  
TV/DVD  
POWER  
0-9  
26  
13,14,26  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Direct channel selection of TV  
Input setting  
Enter a password  
14,18  
29,31  
19,21,37~39  
1
4
2
5
8
3
6
INPUT SELECT  
GAME  
Switch between TV/AV  
45  
Switch between TV/AV and GAME  
Sleep timer  
45  
15  
16  
7
SLEEP  
9
CLOSED  
SLEEP  
VOLUME  
CAPTION  
0
CLOSED CAPTION  
Switch between TV/Caption/Text in  
Closed Caption mode  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
VOLUME  
TOP MENU  
SUBTITLE  
AUDIO  
Adjust volume of TV  
Select title  
14  
33  
32  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Set Subtitle  
CH +  
Switch the sound of TV  
Change sound track language  
23  
32  
ANGLE  
Change playback angle  
33  
RETURN  
SELECT/ENTER  
SET UP/MENU  
TV mode - Display menu of TV  
13,17~24  
CH –  
DVD mode - Call up initial setup mode 27,34~42  
DVD MENU  
CANCEL  
Display DVD menu  
33  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Reset information in the menu 22,24,29,31  
37~39,40~42  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
ZOOM/CH RTN  
Switch between present/last channel  
Zoom  
15  
29  
CH+/–  
Select channel of TV  
Cursor buttons  
15  
13,17~24  
23~42  
RETURN  
Remove DVD set up menu  
34~35  
SELECT/ENTER  
Enter information in the menu  
13,17~21  
Select option in the menu 26,29~31,33~43  
FWD/REV  
PLAY  
Fast Forward/Review playback  
Playback  
28  
27,28,31,33  
30,31  
PLAY MODE  
SKIP  
Select playback mode  
Skip chapter to forward or reverse  
direction  
28  
STOP  
JUMP  
SLOW  
PAUSE  
Stop  
27  
29  
28  
28  
Locating desired scene  
Forward/Reverse- slow motion  
Pause CD sound  
Still picture of DVD  
REPEAT A-B  
Repeat playback between A and B  
30  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Inserting Batteries  
Slide the battery compartment  
cover in the direction of the  
arrow.  
Install two "AAA" batteries  
(supplied), paying attention to  
the polarity diagram in the  
battery compartment.  
Replace the compartment  
cover.  
2
3
1
Operation  
Aim the remote control at the remote sensor and  
press control buttons to operate.  
Operate the remote control within 30° angle on  
either side of the remote sensor, up to a dis-  
tance of Approx. 5 meters.  
Approx. 5 meters  
The precautions below should be followed when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.  
Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from  
possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery  
manufacturers directions).  
Power Source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert  
AC Outlet  
the AC cord plug into a standard 120V 60Hz polarized AC outlet.  
Wider Hole  
and Blade  
NOTES:  
Never connect the AC line cord plug to other than the specified  
voltage (120V 60Hz). Use the attached power cord only.  
If the polarized AC cord does not fit into a non-polarized AC  
outlet, do not attempt to file or cut the blade. It is the users  
responsibility to have an electrician replace the obsolete outlet.  
If you cause a static discharge when touching the unit and the  
unit fails to function, simply unplug the unit from the AC outlet  
and plug it back in. The unit should return to normal operation.  
If the AC cord plug is plugged in for the first time, wait for about  
5 seconds before pressing the POWER button.  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna connections  
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna  
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.  
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)  
Connect the 75 ohm Cable from the Combination  
VHF/UHF Antenna to the Antenna Jack.  
Antenna  
Jack  
Antenna  
Jack  
If your Combination VHF/UHF Antenna has a 300  
ohm Twin-lead Wire, the use of the 300-75 ohm  
Matching Transformer may be necessary.  
UHF/  
VHF  
UHF/  
VHF  
75 ohm  
Coaxial  
Cable  
300-75 ohm  
Matching  
Transformer  
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)  
Connect the UHF 300 ohm Twin-lead Wire to the  
Combiner (not supplied). Connect the VHF 300  
300-75 ohm  
Matching  
Transformer  
Antenna  
Jack  
ohm Twin-lead Wire to the 300-75 ohm Matching  
Transformer. Attach the Transformer to the Com-  
biner, then attach the Combiner to the Antenna  
Jack.  
UHF/  
VHF  
Combiner  
UHF 300 ohm  
VHF 300 ohm  
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
Twin-lead Wire to the Combiner. Attach the Com-  
biner to the Antenna Jack.  
Antenna  
Jack  
UHF/  
VHF  
VHF 75 ohm  
Combiner  
UHF 300 ohm  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable TV connections  
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable  
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is  
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device  
which is generally provided by the cable company.  
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE  
For basic cable service not requiring a Converter/Descrambler  
Antenna  
box, connect the CATV 75 ohm Coaxial Cable directly to the  
Jack  
Antenna Jack on the back of the TV/DVD.  
UHF/  
VHF  
75 ohm  
Coaxial Cable  
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE  
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the  
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,  
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the  
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually  
channel 3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
CATV Cable  
Antenna  
Jack  
75 ohm Cable to  
TV/VCR  
Converter/  
Descrambler  
UHF/  
VHF  
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH  
SCRAMBLED PREMIUM CHANNELS  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from  
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”  
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune  
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/  
Descrambler box to tune scrambled channels.  
Converter/  
Descrambler  
Incoming  
75 ohm  
Antenna  
Jack  
75 ohm Cable  
to TV/VCR  
CATV Cable  
A
A/B Switch  
Splitter  
B
UHF/  
VHF  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
You can choose from three different languages (English, French and Spanish) for the on-screen displays.  
Adjustment menus and messages will appear in the language of your choice.  
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU  
button initially. Select the language you prefer first, then proceed with the other menu options.  
To turn on the TV/DVD, press POWER. The Power indicator  
1 will light.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press MENU in the TV mode.  
The TV menu screen will appear.  
2
3
1
4
2
5
8
3
6
Press  
or  
until the OPTION  
menu appears.  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
or  
to select the  
4
5
LANGUAGEoption, then press  
CH +  
or  
button.  
RETURN  
SELECT/ENTER  
CH –  
Press  
or  
to select the  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
desired language: English  
(ENGLISH), Spanish  
(ESPAÑOL) or French  
(FRANCAIS), then press  
ENTER.  
SKIP  
LANGUAGE/IDIOMA/LANGUE  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/
/
/
/ MENU  
<
<
Press MENU until the MENU  
screen is cleared.  
NOTE:  
If the unit does not operate properly,  
or No key operation (by the unit and/  
or the remote control): Static electricity,  
etc., may affect the player's operation.  
Disconnect theAC power cord once, then  
connect it again.  
The TV section has its own menu and also  
DVD section has its own menu (see page  
26).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
To turn on the TV/DVD, press  
1 POWER.  
Adjust the volume level by  
2
pressing VOLUME  
or . The  
volume level will be indicated on  
the screen by green bars. As the  
volume level increases, so do  
the number of bars. If the volume  
decreases, the number of green  
bars also decreases.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
VOLUME  
32  
1
4
2
5
8
3
6
Set the TV/CATV menu  
3 option to the appropriate  
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
7
SLEEP  
9
position. (See page 17.)  
CLOSED  
VOLUME  
CAPTION  
Press the Direct Channel selection  
0
4 buttons to select the channel.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
CH 012  
TV Mode Direct Channel Selection  
When the TV/CATV menu option is  
in the TV position, all channels can  
be instantly selected by using two  
buttons. (for example, to select  
channel 2, press 0, then 2. If  
you press only 2, channel  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
selection will be delayed for a few  
seconds.) For channels 10 and  
above, press the 2 digits in order.  
RETURN  
SELECT/ENTER  
CH –  
CATV Mode Direct Channel Selection  
When the TV/CATV menu option is in the CATV position, channels  
can be selected as follows:  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
TO SELECT CATV CHANNELS:  
SKIP  
1-9:  
Press 0twice, then 1-9 as needed. Example, to select  
channel 2, press "002".  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
10-12:  
13-99:  
Press 0, then the remaining 2 digits. Example, to  
select channel 12, press "012".  
Press the 2 digits in order. Example, to select channel  
36, press "36".  
100-125: Press the 3 digits in order. Example, to select channel  
120, press "120".  
NOTE FOR CHANNELS 1-12:  
If only 1 or 2 buttons are pressed, the corresponding channel  
will be selected in 2 seconds.  
CATV  
TV  
VHF  
2-13  
VHF  
2-13  
UHF  
14-69  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
NOTES:  
If a channel with no broadcast is  
selected, the sound will automati-  
cally be muted.  
If a station being viewed stops  
broadcasting, the TV will automati-  
cally shut itself off after 15 minutes.  
(5A)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL UP/DOWN  
Press and release CHANNEL CH +  
or . The channel automatically  
stops at the next channel set into  
memory.  
For proper operation, before select-  
ing channels, they should be set into  
the memory. See pages 17 and 18  
To memorize channels”  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
RECALL  
7
SLEEP  
9
CLOSED  
Press RECALL to display the  
current informations on the screen.  
Press RECALL again to clear the  
call display.  
VOLUME  
CAPTION  
0
STEREO SAP  
CH 012  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Channel number or VIDEO mode  
Stereo or SAP (second audio  
program) audio status  
SEL. MONO+SAP  
CH +  
Audio output status  
CH RETURN  
This button allows you to go back to  
the last channel selected by pressing  
CH RTN. Press CH RTN again to  
return to the last channel you were  
watching.  
RETURN  
SELECT/ENTER  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
SLEEP  
SLEEP  
120  
To set the TV/DVD to turn off after a  
preset amount of time, press SLEEP  
on the remote control. The clock will  
count down 10 minutes for each press  
of SLEEP (120, 110, ...10, 0). After the  
sleep time is programmed, the display  
will appear briefly every ten minutes  
to remind you that the sleep timer is  
operating. To confirm the sleep timer  
setting, press SLEEP and the remain-  
ing time will be displayed for a few  
seconds. To cancel the sleep timer,  
press SLEEP repeatedly until the dis-  
play turns to 0.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed caption  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning  
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.  
Captions: This Closed Caption Mode will display text on the  
screen in English or another language (depending on the set-  
ting of the Closed Captions CH 1/2).  
Generally, Closed Captions in English are transmitted on Cap-  
tions Channel 1 and Closed Captions in other languages are  
transmitted on Captions Channel 2.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Text: The Text Closed Caption Mode will usually fill the screen  
with a programming schedule or other information.  
After selecting a Closed Caption Mode, it will stay in effect until it  
is changed, even if the channel is changed.  
7
SLEEP  
9
CLOSED  
If the Captions signal is lost due to a commercial or a break in  
the signal, the Captions will reappear when the signal is received  
again. If the channels are changed, the Captions will be delayed  
approximately 10 seconds. The Captions will appear in places  
on the screen where they will least interfere with the picture,  
usually on the bottom of the screen. News programs will usually  
show three-line Closed Captions which scroll onto the screen.  
Most other shows provide two or three lined Captions placed  
near the character who is speaking so the viewer can follow the  
dialogue. Words in italics or underlined describe titles, words in  
foreign languages or words requiring emphasis. Words that are  
sung usually appear enclosed by musical notes.  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
RETURN  
SELECT/ENTER  
For television programs broadcasting with Closed Captions, look  
in your TV guide for the Closed Captions symbol (CC).  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
TO VIEW CLOSED CAPTIONS  
Press CLOSED CAPTION to  
switch between normal TV and the  
two closed caption modes (cap-  
tions and full screen text). Closed  
captioning will display text on the  
screen for hearing impaired  
viewers.  
NOTES:  
When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.  
If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with  
Closed Captioning, especially with live programs. This is because during live programs, captions are also  
entered live. These transmissions do not allow time for editing.  
When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may  
interfere with Closed Captions.  
Some cable systems and copy protection systems may interfere with the Closed Captioned signal.  
If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or  
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception  
or use an outdoor antenna.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next  
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-  
grammed into the TV/DVDs memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up  
to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.  
When shipped from the factory, this menu option is in the CATV mode.  
TV/CATV SELECTION  
Press MENU in the TV mode.  
1 The TV menu screen will appear.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
or  
until the SET UP  
2 menu appears.  
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
Press  
CATV.  
or  
to select the TV/  
CANCEL ZOOM/CH RTN  
3
4
CH +  
RETURN  
SELECT/ENTER  
CH –  
Press  
or CATV mode.  
or  
to select the TV  
TV - VHF/UHF channels  
CATV - CABLE TV channels  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Press MENU until the MENU  
5 screen is cleared.  
CATV CHART  
The chart below is typical of many cable system channel allocations.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
AUTOMATIC MEMORY TUNING  
Press MENU in the TV mode. The TV menu  
1 screen will appear.  
Press  
appears.  
or  
until SET UP menu  
2
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
or  
to select the “AUTO  
1
4
2
5
8
3
6
3
CH MEMORY”, then press  
The TV will begin memorizing all the  
channels available in your area.  
or  
.
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Press MENU until the MENU screen  
0
4 is cleared.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
TO ADD/DELETE CHANNELS  
Select the desired channel to be  
1 memorized or deleted using Direct  
CH +  
Channel Selection (0-9), or CH + or .  
Press MENU. The TV menu  
2 screen will appear.  
RETURN  
SELECT/ENTER  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Press  
appears.  
or  
until SET UP menu  
to select the “ADD/  
3
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
Press  
or  
4 DELETE”.  
Press  
or  
to select “ADD” or  
5
“DELETE”, whichever function you  
want to perform.  
Press MENU until the MENU screen  
6 is cleared.  
Repeat steps 1-6 for other channels  
7 you want to add or delete.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc.  
The TV/DVD corresponds to "TV RATING" and "MOVIE RATING". To use the V-Chip function, you must  
register a password.  
TO REGISTER PASSWORD  
Press MENU in the TV mode. The TV menu  
1 screen will appear.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
menu appears.  
or  
until the OPTION  
2
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
Press  
or  
to select the V-  
3
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
CHIP SET, then press  
or  
.
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
Enter the password (4 digits)  
4 using Direct Channel Selection  
RETURN  
SELECT/ENTER  
(0-9), then press ENTER.  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
" " appears instead of the number.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Enter the same password again  
5 for the safety, then press ENTER.  
Now the password was registered  
and V-Chip setting menu will  
appear on the display.  
NOTES:  
If you forget the password, you can-  
not set the V-Chip.  
To avoid forgetting the password, write  
it down and keep in the safe place.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
(Continued)  
TO SET THE V-CHIP  
In the V-CHIP SET menu, press  
1
or  
to select the TV  
RATING.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
desired setting.  
OFF  
TV-Y :  
TV-Y7 :  
TV-G :  
TV-PG:  
TV-14 :  
TV-MA:  
or  
to display the  
2
1
4
2
5
8
3
6
:
TV RATING is not set  
All children  
7 years old and above  
General Audience  
Parental guidance  
14 years old and above  
17 years old and above  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
RECALL to show the contained rating. Press  
/
or  
/
to select the desired item you want.  
CH +  
Press  
or  
to select the  
3 MOVIE RATING.  
RETURN  
SELECT/ENTER  
CH –  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Press  
or  
to select desired  
4 rating.  
SKIP  
OFF  
G
PG  
:
:
:
MOVIE RATING is not set  
All ages  
Parental guidance  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
PG-13 : Parental guidance  
less than 13 years old  
R
:
Under 17 years old  
Parental guidance suggested  
NC-17 : 17 years old and above  
X
:
Adult only  
Press  
5 CHIP.  
or  
to select V-  
To use after the TV is protected  
When the program applied to the V-  
Chip setting is received, enter the  
password. Protection can be can-  
celled.  
Press  
or  
to Display ON.  
6
Now your settings were set into  
the memory.  
NOTE:  
The V-Chip function is activated only  
on programs and tapes that have the  
rating signal.  
Press MENU until the MENU  
7 screen is cleared.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO CHANGE PASSWORD  
Press MENU in the TV mode. The TV menu  
1 screen will appear.  
Press  
menu appears.  
or  
until OPTION  
2
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Press  
CHIP SET, then press  
or  
to select the V-  
3
or  
.
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Enter the Password using Direct  
4 Channel Selection (0-9), then  
press ENTER.  
CH +  
RETURN  
SELECT/ENTER  
CH –  
Press  
or  
CHANGE PASSWORD, then  
press or  
to select  
5
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
.
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Enter the new password using  
6 Direct Channel Selection (0-9),  
then press ENTER.  
Enter the same password again  
7 for safety, then press ENTER.  
Press MENU repeatedly to  
8 return to normal screen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture control adjustment  
Picture controls are factory preset but you can adjust them individually as follows:  
Press MENU in the TV mode. The TV menu  
screen will appear.  
1
Press  
or  
until PICTURE  
2 menu appears.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Press  
you want to adjust.  
or  
to select the item  
7
SLEEP  
9
3
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
Press  
4 setting.  
or  
to adjust the  
RETURN  
SELECT/ENTER  
CH –  
increase brightness  
increase contrast  
be brilliant color  
decrease brightness  
decrease contrast  
be pale color  
BRIGHTNESS  
CONTRAST  
COLOR  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
be reddish color  
be greenish color  
makes picture softer  
TINT  
SHARPNESS  
SKIP  
makes picture clearer  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
After your desired setting press  
5 MENU until the MENU screen is  
cleared.  
CANCEL  
Pressing CANCEL while making  
picture adjustments will return all  
adjustments to the factory preset  
levels.  
NOTE:  
The CONTRAST default setting is set  
to maximum at the factory.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stereo and separate audio program (SAP)  
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly  
enhance TV viewing by bringing you programs with high fidelity stereo sound.  
MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to  
transmit a second language for bilingual transmission or for other purposes.  
LISTENING TO STEREO SOUND  
When the TV is turned on or a  
channel selection is made, make  
STEREO  
CH 013  
certain the STEREO appears on  
the screen. This means that  
"Stereo" broadcasting is  
available. You can enjoy stereo  
sound from the left and right  
speakers.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
When "Mono" broadcasting is  
received, no indication is  
displayed.  
If the broadcast signal is not  
strong enough or clear stereo  
sound is not available, press  
AUDIO to change to mono  
sound. The noise should be  
eliminated. Press it again to  
return to the stereo sound.  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
CH +  
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)  
When the TV is turned on or a  
channel selection is made, make  
RETURN  
SELECT/ENTER  
STEREO SAP  
CH 013  
CH –  
certain the SAP appears on the  
screen. This means that the  
"Separate Audio Program"  
broadcasting is available.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
TO SELECT DESIRED SOUND  
Press AUDIO to select the  
desired sound.  
SEL. STEREO  
MONO+SAP BROADCASTING  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MONO)  
SAP SOUND  
STEREO+SAP BROADCASTING  
STEREO SOUND  
(MAIN)  
SAP SOUND  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MAIN)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound control adjustment  
Sound controls are factory preset but  
you can adjust them individually as  
follows:  
Press MENU in the TV mode. The TV menu screen will appear.  
1
Press  
or  
until the AUDIO  
2 menu appears.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Press  
you want to adjust.  
or  
to select the item  
3
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
or  
or  
to adjust the  
4 setting.  
BASS:  
Press  
CH +  
to adjust the bass sound.  
TREBLE:  
Press  
BALANCE:  
or  
to adjust the treble sound.  
RETURN  
SELECT/ENTER  
CH –  
Press  
or  
to obtain an equal sound level from both  
speakers.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
After your desired setting press  
5 MENU until the MENU screen is  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
cleared.  
CANCEL  
Pressing CANCEL while making sound adjustments will return all  
adjustments to the factory preset levels.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
About this owners manual  
Playable discs  
This owner’s manual explains the basic instructions of  
this TV/DVD. Some DVD video discs are produced in a  
manner that allows specific or limited operation during  
playback. As such, the TV/DVD may not respond to all  
operating commands. This is not a defect in the TV/DVD.  
Refer to instruction notes of discs.  
This DVD/VCR can play the following discs.  
Maximum  
playback time  
Disc  
Size  
Disc Mark Contents  
Approx. 4 hours  
(single sided disc)  
12 cm  
Audio  
+
video  
(moving  
pictures)  
“ ” may appear on the TV screen during operation.  
A “ ” means that the operation is not permitted by the  
TV/DVD or the disc at the moment.  
Approx. 8 hours  
(double sided disc)  
DVD  
video  
discs  
For example, it is unable to skip the playback of  
Approx. 80 minutes  
(single sided disc)  
copyright message of the disc. When the SKIP(  
button is pressed. Alternatively, the “ ” may also  
indicate that the feature is not available for the disc.  
)
8 cm  
Approx. 160 minutes  
(double sided disc)  
Notes on region numbers  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
The region number of this TV/DVD is 1. If region  
Audio  
+
video  
(moving  
pictures)  
numbers, which stand for their playable area, are printed  
on your DVD video disc and you do not find  
disc playback will not be allowed by the player. (In this  
case, the TV/DVD will display a message on-screen.)  
VIDEO  
CDs  
ALL  
1
or  
,
DIGITAL VIDEO  
8 cm  
On VIDEO CDs  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
This TV/DVD supports VIDEO CDs equipped with the  
PBC (Version 2.0) function. (PBC is the abbreviation of  
Playback Control.) You can enjoy two playback  
variations depending on types of discs.  
Audio  
CDs  
Audio  
8 cm  
(CD  
single)  
The following discs are also available.  
CD-R  
CD-RW  
CD-R/RW discs recorded by CD-DA method can be  
played. Some CD-R/RW discs may be incompatible.  
VIDEO CD not equipped with PBC function  
(Version 1.1)  
Sound and movie can be played on this TV/DVD in the  
same way as an audio CD.  
VIDEO CD equipped with PBC function  
(Version 2.0)  
In addition to operation of a VIDEO CD not equipped  
with the PBC function, you can enjoy playback of  
interactive software with search function by using the  
menu displayed on the TV screen (Menu Playback).  
Some of the functions described in this owner’s  
manual may not work with some discs.  
• You cannot play discs other than those listed above.  
• You cannot play discs of DVD-RAM, DVD-RW, etc., or  
non standardized discs even if they may be labeled as  
above.  
• This TV/DVD uses the NTSC color system, and  
cannot play DVD video discs recorded in any other  
color system (PAL, SECAM, etc.).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting setup language  
The setup language can be selected.  
The following pages describe the  
setup/operation in DVD mode.  
Preparation  
Insert the AC cord plug into a standard 120V 60Hz  
polarized AC outlet.  
Note: When connecting to other equipment, unplug the  
unit from the AC outlet.  
If the AC cord plug is plugged in for the first time, wait for  
about 5 seconds before pressing the power button.  
Press POWER on the unit or on the remote control to turn  
on the unit. The POWER indicator will light.  
When using an amplifier, switch on the amplifier.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
PressTV/DVDtoselectthe  
Reading  
1
DVD mode.  
welcome  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Readingchanges to  
No Disc.  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
(If DVD disc has already  
loaded, the playback will  
start automatically.)  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press SET UP in the stop  
2
Picture Sound Parental  
Language  
Other  
CH +  
mode.  
Press  
or  
to select  
Other.  
RETURN  
SELECT/ENTER  
CH –  
/Enter/Setup/Return  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press  
or ENTER  
3
4
Language Picture Sound Parental Other  
OSD Language English  
to select OSD Language.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
/Enter/Setup/Return  
Press  
then press  
lect desired language(e.g.  
English), then press  
ENTER.  
or ENTER and  
or to se-  
Language Picture Sound Parental Other  
OSD Language English  
English  
Francais  
Espanol  
If the unit does not operate properly:  
Static electricity, etc., may affect the play-  
er's operation. Disconnect theAC power  
cord once, then connect it again.  
/Enter/Setup/Return  
NOTE: To make SETUP screen disappear, press SET UP  
(or RETURN) while the SETUP screen is shown.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback procedure  
Press OPEN/CLOSE on  
the unit. The disc tray will  
open.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Place a disc onto the tray.  
Hold the disc, position it  
with the printed label side  
up, align it with the guides,  
and place it in its proper  
position.  
2
3
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
O
L
U
M
E
C
H
A
N
N
E
L
V
LIN  
ID  
E
E
I
N
O
2
L/MONO-A  
UDIO-R  
HEADPHONE  
CH +  
RETURN  
SELECT/ENTER  
CH –  
Press PLAY or OPEN/  
CLOSE on the unit.  
The disc tray closes auto-  
matically.  
On the TV-screen,  
changes to Readingand  
then playback  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
commences.  
Reading  
Note:  
A menu screen will  
appear on the TV screen,  
if the disc has a menu  
feature.  
If a non-compatible disc is loaded, "Incor-  
rect Disc", "Region Code Error" or "Paren-  
tal Error" will appear on the TV screen ac-  
cording to the type of loaded disc. In this  
case, check your disc again (See pages 25  
and 37).  
Press  
/
or  
/
to select title.  
4
5
Some discs may take a minute or so to start  
playback.  
When you set a single-faced disc label  
downwards (ie. the wrong way up) and  
press PLAY or CLOSE on the unit, "Read-  
ing" will appear on the display for 10 sec-  
onds and then "Incorrect Disc" will continue  
to be displayed.  
Some playback operations of DVDs may be  
intentionally fixed by software producers.  
Since this unit plays DVDs according to the  
disc contents the software producers de-  
signed, some playback features may not be  
available.Also refer to the instructions sup-  
plied with the DVDs.  
Press SELECT.  
Title is selected and play commences.  
Press STOP to end playback.  
6
The unit records the stopped point, depending on the  
disc. “ ” appears on the screen. Press PLAY to resume  
playback (from the scene point).  
If you press STOP again or unload the disc (“ ” appears  
on the screen.), the unit will clear the stopped point.  
When playing DTS-encoded Audio CDs,  
excessive noise will be heard from the ana-  
logue stereo outputs. To avoid possible  
damage to the audio system, the consumer  
should take proper precautions when the  
analogue stereo outputs of the DVD player  
are connected to an amplification system.  
To stop the playback, press STOP.  
Then press OPEN/CLOSE on the unit.  
The disc tray opens.  
Remove the disc and press OPEN/CLOSEon the unit then  
press POWER.  
7
The disc tray closes automatically and unit turns off.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special playback  
Note: there may be a slight delay be-  
tween you pressing the button and the  
function activating.  
Fast Forward Playback  
Press FWD during normal playback.  
Each press of the FWD button will increase the speed of the  
search  
(x2),  
(x4),  
(x8),  
(x20).  
• To resume normal playback, press PLAY.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Review Playback  
Press REV during normal playback.  
Each press of the REV button will increase the speed of the  
search (x2), (x4), (x8), (x20).  
1
4
2
5
8
3
6
• To resume normal playback, press PLAY.  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Still Playback  
Press PAUSE during normal  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
playback to pause playback.  
CH +  
To resume normal playback,  
press PLAY.  
RETURN  
SELECT/ENTER  
CH –  
Frame Advance  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
Press PAUSE during still playback.  
One frame is advanced each time you press PAUSE.  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
To resume normal playback, press PLAY.  
Slow-motion Playback  
Press SLOW  
(
)
Reverse or SLOW  
(
)
Forward during  
normal playback or still playback.  
Each press of SLOW will change the speed of the slow x1/2,  
x1/4, x1/6, x1/7.  
To resume normal playback, press PLAY.  
To resume the still playback, press PAUSE.  
Note:  
The unit is capable of holding a still video  
image or On screen display image on your  
television screen indefinitely. If you leave  
the still video image or On screen display  
image displayed on your TV for an ex-  
tended period of time, you risk permanent  
damage to your television screen. Pro-  
jection televisions are very susceptible.  
Locating a chapter or track  
Press SKIP(  
) Forward or SKIP(  
) Reverse during  
playback to locate a chapter that you want to watch.  
Each time you press the button, a chapter or track is  
skipped.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming/Locating desired scene  
Zooming  
This unit will allow you to zoom in on the frame image. You  
can then make selections by switching the position of the  
frame.  
Press ZOOM during play-  
back.  
The centre part of the  
image will be zoomed in.  
Each press of ZOOM will  
1
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
change the ZOOM  
(x 1.3), 2 (x 1.5) and  
3 (x 2.0).  
1
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Press  
/
/
/
to view a different part of the frame.  
0
2
3
You may move the frame from the centre position to UP,  
DOWN, LEFT or RIGHT direction.  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
In the zoom mode press ZOOM repeatedly to return to a  
1:1 view (  
Off).  
CH +  
RETURN  
SELECT/ENTER  
CH –  
Locating Desired Scene  
Use the title, chapter and time recorded on the disc to  
locate the desired point to play back.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press JUMP during play-  
back.  
1
Jump  
Time  
Title  
Chapter  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
/Enter/0 9/Cancel/Jump  
Press  
or  
to select the Time, Titleor Chapter.  
2
3
Note:  
Press Number buttons (0-9) to change the number.  
You can select the Pause, Slow or  
Search playback in the zoom mode.  
Some discs may not respond to zoom  
feature.  
If you input a wrong number, press CANCEL.  
Refer to the package supplied with the disc to check the  
numbers.  
Press ENTER.  
4
Playback starts.  
When you change the title, playback starts from  
Chapter 1 of the selected title.  
Some discs may not work in the above operation.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat playback  
Title, Chapter, Track Playback  
Press PLAY MODE during playback or stop mode.  
DVD  
Press  
/
or ENTER once or twice to select Chapteror Title.  
Repeat  
:
Off  
Repeat  
:
Chapter  
Repeat  
:
Title  
/Enter/Play Mode  
/Enter/Play Mode  
/Enter/Play Mode  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
1
4
2
5
8
3
6
Audio CD  
Press  
Press  
to select Repeat.  
or ENTER once or twice to select Trackor All.  
/
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Play Mode  
Repeat  
:
:
Off  
Off  
Play Mode  
Repeat  
:
:
Off  
Track  
Play Mode  
Repeat  
:
:
Off  
All  
0
/Enter/Play Mode  
/Enter/Play Mode  
/Enter/Play Mode  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press PLAY MODE again to make the screen disappear.  
Press PLAY to start Repeat playback.  
To resume normal playback, select Repeat Off.  
CH +  
RETURN  
SELECT/ENTER  
CH –  
A-B Repeat Playback  
A-B repeat playback allows you to repeat material between  
two selected points.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press REPEAT A-B dur-  
ing playback.  
The start point is selected.  
1
A
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Press REPEAT A-B again.  
Note:  
2
A B  
The end point is selected.  
Playback starts at the point  
thatyouselected.Playback  
stops at the end point, re-  
turns to Point A automati-  
cally, then starts again.  
Some discs may not work with the repeat  
operation.  
InA-B repeat mode, subtitles near point  
A or B may not appear.  
During the A-B Repeat Playback the  
ANGLE feature will not operate.  
You may not be able to set A-B Repeat,  
depending on the scenes of the DVD.  
A-B repeat does not work with an inter-  
active DVD.  
To resume normal playback press REPEAT A-B again.  
appears on the screen.  
Off  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program playback/Random playback (CD/ VCD)  
You can arrange the order of tracks on  
the disc.  
Program playback  
Press TV/DVD to select DVD mode.  
Press PLAY MODE in the stop mode.  
1
2
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Press  
Mode, then press  
select program.  
/
to select Play  
Play Mode  
Repeat  
1
:
:
Program  
Off  
/
to  
4
5
6
7
8
9
10  
11  
12  
1
4
2
5
8
3
6
2
3
Clear  
Program Playback  
/Enter/0 9/Cancel/Play Mode  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Press  
/
or  
/
to  
3
4
Play Mode  
Repeat  
:
:
Program  
Off  
7
8
9
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
selecttheprogrammingpo-  
sition.UseNumberedbut-  
tons(0-9)toinputtheTrack  
numbers.  
Toprogramothers,repeat  
Step 3.  
1 9  
2 3  
3 11  
Clear  
4
5
6
10  
11  
12  
Program Playback  
/Enter/0 9/Cancel/Play Mode  
CH +  
Ifyouputawrongnumber,  
press CANCEL.  
RETURN  
SELECT/ENTER  
CH –  
Press  
/
or  
/
to  
Program Playback  
select Program Playback”  
and press ENTER.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
The programmes you se-  
lected will start to playback  
in the order.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
To return to normal play-  
back, select Play Mode:  
Off.  
To cancel program play, select Clearand press ENTER.  
The program is cancelled when you open the disc tray or  
turn the power off.  
Random playback  
1 Press PLAY MODE in the  
stop mode.  
Play Mode  
Repeat  
:
:
Random  
Off  
/Enter/Play Mode  
2 Press  
/
to select Play  
Mode, then press  
/
to  
select Random.  
3 Press PLAY.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing soundtrack language/Subtitles  
Changing soundtrack language  
You can select the language when you play a multilingual  
disc.  
Press AUDIO during play-  
back.  
1
2/8 Fra Dolby Digital  
Spatializor off  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
The current soundtrack  
language will appear.  
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Press AUDIO repeatedly  
until the desired language  
is selected.  
0
2
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
1/8 Eng Dolby Digital  
Spatializor off  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
The on-screen display will  
disappear after a few sec-  
onds.  
CH +  
Subtitles  
Turning the Subtitles On and Off  
RETURN  
SELECT/ENTER  
CH –  
When playing back a disc recorded with subtitles, you  
can turn the subtitles on or off.  
Note:  
Press SUBTITLE during play-  
back until Offappears.  
If the desired language is not heard  
after pressing the button several times,  
the language is not recorded on the disc.  
Changing soundtrack language is can-  
celled when you open the disc tray or  
turn the power off. The initial default lan-  
guage or available language will be  
heard if the disc is played back again.  
If desired language is not selected after  
pressing the button several times, the  
language is not recorded on the disc.  
Changing subtitle language is cancelled  
when you open the disc tray or turn the  
power off.  
Depending on the DVD, you may not be  
able to turn the subtitles on even if they  
are recorded on it. Depending on the  
DVD, you may not be able to turn the  
subtitles off. Depending on the DVD, you  
may not be able to change the subtitles  
even if multilingual subtitles are recorded  
on it. While playing the DVD, the subtitle  
may change when: -you open or close  
the disc tray -you change the title.  
In some cases, the subtitle language is  
not changed to the selected one imme-  
diately.  
Off  
Changing the subtitle language  
You can select the language when playing back a disc  
recorded with multi-lingual subtitles.  
Press SUBTITLE repeat-  
edly during playback until  
your desired language ap-  
pears.  
1
1/32 Eng  
The on-screen display will disappear after a few seconds.  
2
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles/Title selection/DVD menu  
Changing Angles  
Whenplayingbackadiscrecordedwithmulti-anglefacility,  
you can change the angle that you are viewing the scene  
from.  
PressANGLEduringplay-  
back.  
1
1/9  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
The current angle will ap-  
pear.  
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Press ANGLE repeatedly until the desired angle is se-  
lected.  
2
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
Title Selection  
CANCEL ZOOM/CH RTN  
Two or more titles are recorded on some discs. If the title  
menu is recorded on the disc, you can select the desired  
title.  
CH +  
Press TOP MENU during playback.  
1
Title menu appears on the screen.  
RETURN  
SELECT/ENTER  
Press  
/
or  
/
to select the desired title.  
CH –  
2
3
Press ENTER or PLAY.  
The playback of the selected title will start.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
DVD Menu  
SomeDVDsallowyoutoselectthedisccontentsusingthe  
menu.  
When you play back these DVDs, you can select the sub-  
title language and sound-track language,etc. using the  
DVD menu.  
Press DVD MENU during playback.  
1
The DVD menu appears on the screen.  
Press DVD MENU again to resume playback at  
the scene when you pressed DVD MENU.  
Note:  
Depending on the DVD, you may not be  
able to change the angles even if multi-  
angles are recorded on the DVD.  
Depending on the DVD, you may not be  
able to select the title. Depending on the  
DVD, a "title menu" may simply be called  
a "menu" or "title" in the instructions sup-  
plied with the disc.  
Press  
/
or  
/
to select the desired item.  
2
3
Press ENTER.  
The menu continues to another screen. Repeat steps 2  
and 3 to set the item completely.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the aspect ratio of TV screen  
You can select the aspect ratio for  
your TV.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press or  
Picture.  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
7
SLEEP  
9
Press  
or ENTER, then  
or toselectTv  
2
3
Language Picture Sound Parental Other  
CLOSED  
VOLUME  
CAPTION  
press  
Screen.  
Tv Screen  
Display  
4:3  
On  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
CH +  
Press  
Press  
or ENTER.  
or to select  
Language Picture Sound Parental Other  
Tv Screen  
Display  
4:3  
On  
4:3  
4:3  
your desired screen type,  
RETURN  
SELECT/ENTER  
CH –  
16:9  
then press ENTER.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
/Enter/Setup/Return  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
You have the following screen sizes to choose from:  
4:3  
Select this mode when connecting to a conventional TV.  
When playing back a wide screen-DVD disc, it displays  
the wide picture with black bands at the top and bottom of  
screen.  
4:3  
PAN SCAN  
It displays the wide picture on the whole screen with left  
and right edges automatically cut off.  
Note:  
16:9  
WIDE SCREEN  
If the DVD disc is not formatted in the pan  
& scan style, it displays 4:3 style.  
Select this mode when connecting to a wide-screen TV.  
A wide screen picture is displayed full size.  
To make SETUP screen disappear, press SET UP or RE-  
TURN while the SETUP screen is being displayed.  
4
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting on Screen display/Status display of disc  
On screen display can be switched on  
or off when you press the buttons.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press or  
Picture.  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press  
or ENTER, then  
2
3
Language Picture Sound Parental Other  
press  
Display.  
or  
to select  
7
SLEEP  
9
Tv Screen  
Display  
4:3  
On  
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
/Enter/Setup/Return  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
select Onor Off.  
/
or ENTER to  
Language Picture Sound Parental Other  
CH +  
Tv Screen  
Display  
4:3  
Off  
RETURN  
SELECT/ENTER  
CH –  
/Enter/Setup/Return  
ON: On screen displays appear when you press the  
buttons (factory setting).  
OFF: On screen displays do not appear when you press  
any buttons.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
To make SETUP screen disappear, press SET UP or RE-  
TURN while the SETUP screen is being displayed.  
4
Status display of Disc  
Each Press of RECALL, the status display of the disc will appear  
on the screen and change as follows.  
DVD  
00:34:56 01:12:33  
00:34:56 01:12:33  
Title  
1/99 Chapter 1/999  
1/9  
1/8 Eng DolbyDigital  
1/32 Eng  
To make status display disappear, press RECALL again.  
CD  
34:56  
71:33  
Track 11/99  
When you playback the CD disc, the status display will  
appear on the screen and continue displaying.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Range Control  
DRC(DynamicRangeControl)enables  
you to control the dynamic range so  
as to achieve a suitable sound for  
your equipment.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode.  
1
Press  
Sound.  
or  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press  
select DRC.  
or ENTER to  
2
3
Language Picture Sound Parental Other  
DRC  
Std  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
/Enter/Setup/Return  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
Press  
press  
desired setting.  
or ENTER, then  
or to select  
Language Picture Sound Parental Other  
Max  
Std  
Min  
DRC  
Std  
CH +  
RETURN  
SELECT/ENTER  
/Enter/Setup/Return  
CH –  
Max: Full dynamic range is increased.  
Std: Full dynamic range is maintained.  
Min: Dynamic range is reduced.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Note:  
This function works only during  
playback of Dolby Digital recorded discs.  
The level of Dynamic Range Reduction  
may differ depending on DVD video  
disc.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental control setting  
Some discs are specified not suitable  
for children. Such discs can be limited  
not to play back with the unit.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode.  
1
2
Press  
or  
to select  
Language Picture Sound Parental Other  
Password  
Parental. Then press  
or ENTER.  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
Parental  
Off  
1
4
2
5
8
3
6
0
9/Cancel  
/Enter/Setup/Return  
7
SLEEP  
9
CLOSED  
Press  
Parental, then press  
or until the level you re-  
quire appears.  
or  
to select  
VOLUME  
CAPTION  
Language Picture Sound Parental Other  
Password  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
Parental  
1
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
CH +  
Level Off : The parental control setting does not  
function.  
Level 8 : Almost all DVD software can be played  
back.  
RETURN  
SELECT/ENTER  
CH –  
Level 1 : DVD software for adults cannot be  
played back.  
Select from the level 1 to level 8. The limitation will be  
more severe as the level number is lower.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Press  
Password.  
Press number buttons  
(0-9) to input a 4-digit  
password.  
or  
to select  
3
Language Picture Sound Parental Other  
Password  
Parental  
1234  
1
Be sure to remember this  
number!  
0
9/Cancel  
/Enter/Setup/Return  
If you input a wrong  
number, press CANCEL.  
Press ENTER to store the  
password.  
Note: Now the rating is  
locked and the setting can-  
not be changed unless you  
enter the correct password.  
4
5
Language Picture Sound Parental Other  
Password  
Note:  
Parental  
1
If each setup (P.34~35, 37~42) has  
been completed, theunitcanalways  
beworkedunderthesameconditions  
(especially with DVD discs).  
Each setup will be retained in the  
memory if you turn the power off.  
Depending on the discs, the unit can-  
not limit playback.  
Some discs may not be encoded with  
specific rating level information though  
its disc jacket says "adult." For those  
discs, the age restriction will not work.  
0
9/Cancel  
/Enter/Setup/Return  
Press SET UP or RETURN to remove the parental control  
screen.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the parental level  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press  
or  
to select  
Language Picture Sound Parental Other  
Password  
Parental  
“Parental”. Then press  
or ENTER.  
1
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
0
9/Cancel  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press number buttons  
(0-9) to enter the password  
you have stored.  
2
3
4
Language Picture Sound Parental Other  
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Password  
Parental  
1234  
1
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
0
9/Cancel  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
CH +  
Press ENTER.  
The rating is now unlocked.  
Language Picture Sound Parental Other  
Password  
Parental  
1
RETURN  
SELECT/ENTER  
CH –  
0
9/Cancel  
/Enter/Setup/Return  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
Press  
Parental, then press  
to change the parental  
level.  
or  
to select  
Language Picture Sound Parental Other  
Password  
SLOW  
PAUSE  
SLOW  
REPEAT A–B  
or  
Parental  
5
/Enter/Setup/Return  
Press  
or  
to select  
5
Language Picture Sound Parental Other  
Password, then press  
number buttons (0-9) to  
enter the password.  
Password  
Parental  
1234  
5
Note:  
Note: You can change the  
password if you want.  
Do not forget the password. If you forget  
the password, contact the dealer that you  
purchased the unit from.  
0
9/Cancel  
/Enter/Setup/Return  
Press ENTER.  
Now the parental level is  
changed and locked.  
6
7
Language Picture Sound Parental Other  
Password  
Parental  
5
Press SET UP or RETURN  
to remove the parental con-  
trol screen.  
0
9/Cancel  
/Enter/Setup/Return  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temporary disabling of rating level by DVD disc  
Depending on the DVD disc, the disc  
may try to temporarily cancel the  
rating level that you have set.  
It is up to you to decide whether to  
cancel the rating level or not.  
Load a DVD disc and press  
PLAY or OPEN/CLOSE on  
the unit (see P.27).  
1
O
L
U
M
E
C
H
A
N
N
E
L
V
LIN  
E
IN  
ID  
E
O
2
L/MONO-A  
U
DIO-R  
HEADPHONE  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
IftheDVDdischasbeendesignedtotemporarilycancelthe  
Ratinglevel,thescreenwhichfollowstheReadingscreen  
willchange,dependingonwhichdiscisplayed.Ifyouselect  
YESwith the SELECT key, Your disc exceeds The  
parental control level#.screen will then appear.  
2
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
Your disc exceeds  
Reading  
VOLUME  
CAPTION  
the parental control level#.  
0
Parental Control Level  
Cancel Picture  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Return  
CH +  
If you wish to cancel the set rating level temporarily, select  
3
Parental Control Levelwith  
or  
, then press SE-  
RETURN  
SELECT/ENTER  
LECT. If the 4-digit password at step 3 on P.37 has been  
set, the password entering screen will appear as shown in  
step 4 below.  
CH –  
Alternatively, if the password has not been set, playback  
will commence. If you dont know (or have forgotten) the  
password, select Cancel Picture.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
The setting screen will disappear. Press OPEN/CLOSE to  
remove the disc.  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
Enter the password with  
number buttons (0-9).  
Then press ENTER.  
4
5
Please enter the  
-
4
digit password  
Enter/0 9/ Cancel/Return  
If you interrupt the enter-  
ing, press RETURN.  
Playback will commence if the entered password was  
correct.  
Note:  
This temporary cancellation of rating level  
will be kept until the disc is ejected.  
When the disc is ejected, the original rating  
level will be set again automatically.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting menu language  
You can select the language of the  
disc menu messages of DVDs.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press  
Language.  
or  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
7
SLEEP  
9
CLOSED  
VOLUME  
CAPTION  
Press  
press  
Menu.  
or ENTER, then  
or to select  
2
3
Language Picture Sound Parental Other  
0
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
CH +  
Press  
Press  
or ENTER.  
or to select  
Language Picture Sound Parental Other  
RETURN  
SELECT/ENTER  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
English  
Francais  
Espanol  
Other  
CH –  
your desired language,  
then press ENTER.  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
/Enter/Setup/Return  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
English, Francais, Espanol  
The selected language is the first-priority Menu language.  
Other: Other language can be selected (See the Lan-  
guage Code List on page 43).  
To make SETUP screen disappear, press SET UP or RE-  
TURN while the SETUP screen is being displayed.  
4
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting subtitle language  
The same subtitle language can  
always be selected even if you replace  
the disc or turn the power off.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press  
Language.  
or  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press  
press  
Subtitle.  
or ENTER, then  
or to select  
7
SLEEP  
9
2
3
Language Picture Sound Parental Other  
CLOSED  
VOLUME  
CAPTION  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
Press  
Press  
or ENTER.  
or to select  
CH +  
Language Picture Sound Parental Other  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
English  
Francais  
Espanol  
Other  
your desired language,  
then press ENTER.  
RETURN  
SELECT/ENTER  
CH –  
Automatic  
Off  
/Enter/Setup/Return  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
English, Francais, Espanol  
The subtitle is displayed with the selected language if it is  
recorded on the disc.  
Other:  
If you want to select another language, enter the language  
code (see the language code list on page 43).  
Automatic:  
The unit will automatically select the same language in  
the AUDIO setting.  
When the unit selects the same language as the AUDIO,  
the subtitles will not appear during playback.  
When you do not use the same language as the AUDIO,  
the subtitles will appear during playback.  
Note:  
If the selected language is not recorded  
on the disc, the first-priority language is  
selected.  
Off:  
Subtitles do not appear.  
To make SETUP screen disappear, press SET UP or RE-  
TURN while the SETUP screen is being displayed.  
4
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting audio soundtrack language  
The same audio soundtrack language  
can always be selected by your unit  
even if you replace the disc or turn the  
power off.  
Press TV/DVD to select DVD mode.  
Press SET UP in the stop mode or No Disc.  
1
Press  
Language.  
or  
to select  
Language Picture Sound Parental Other  
RECALL  
TV/DVD  
POWER  
INPUT SELECT  
GAME  
/Enter/Setup/Return  
1
4
2
5
8
3
6
Press  
press  
Audio.  
or ENTER, then  
or to select  
7
SLEEP  
9
2
3
Language Picture Sound Parental Other  
CLOSED  
VOLUME  
CAPTION  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
0
TOP MENU  
SUBTITLE  
AUDIO  
ANGLE  
SET UP/MENU DVD MENU  
CANCEL ZOOM/CH RTN  
/Enter/Setup/Return  
CH +  
Press  
Press  
or ENTER.  
or to select  
Language Picture Sound Parental Other  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
English  
Francais  
Espanol  
Other  
your desired Audio Lan-  
guage,thenpressENTER.  
RETURN  
SELECT/ENTER  
CH –  
Original  
/Enter/Setup/Return  
REV  
PLAY  
STOP  
FWD  
SKIP  
PLAY MODE  
JUMP  
SKIP  
SLOW  
PAUSE  
SLOW  
REPEAT AB  
English, Francais, Espanol:  
The language you have selected will play if it is  
recorded on the disc.  
Other: If you want to select another language,  
enter the language code (See the Language Code List  
on page 43).  
Original: The unit will select the first priority language  
of each disc.  
To make SETUP screen disappear, press SET UP or RE-  
TURN while the SETUP screen is being displayed.  
4
Note:  
If the selected language is not recorded  
on the disc, the original language will be  
heard.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language code list  
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"  
(see pages 40-42).  
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese 2919  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2921  
2922  
2925  
1529  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
2322 Sundanese 2931  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
2629 Tonga  
1611 Turkish  
2622 Turkmen  
2630 Twi  
Breton  
1929 Panjabi  
1924 Pashto, Pushto  
1911 Persian  
1711 Polish  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese 3219  
2923 Volapük  
2911 Welsh  
1714 Wolof  
2928 Xhosa  
2918 Yiddish  
2924 Yoruba  
2914 Zulu  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian  
2211 Shona  
1625 Latvian, Lettish 2232 Sindhi  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipments  
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-  
ent on the model and features of each component. Check the Owner's Manual provided with each component  
for the location of video and audio inputs and outputs.  
Using an Audio Amplifier  
Rear of TV/DVD  
Amplifier  
To Audio (R) Input  
To Audio (L) Input  
Audio (L) Output  
Audio (R) Output  
AUDIO cord (not supplied)  
Using an AV Amplifier with built-in digital surround  
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems  
including Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as  
shown below.  
Front  
Speaker  
(Right)  
Subwoofer  
Rear of TV/DVD  
TV/DVD  
Front  
Speaker  
(Left)  
Coaxial Digital  
Audio Output  
Coaxial digital cable (not supplied)  
Center Speaker  
To Coaxial Digital Audio Input  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround  
decoder as listed above  
*
*
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
DTSand DTS Digital Outare trademarks of Digital Theater Systems, Inc.  
NOTE:  
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV  
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be  
damaged.  
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.  
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the audio/video inputs  
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.  
NOTE:  
Press INPUT SELECT repeatedly to select the desired mode.  
LINE1, LINE2or TV channel will display on the screen for 4 seconds.  
In the DVD mode this key will not  
operate.  
LINE 1  
TV Channel  
LINE 1  
(Back)  
LINE 2  
(Front)  
1. To connect the TV/DVD to a VCR  
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.  
Operate your VCR as usual.  
Rear of TV/DVD  
VCR  
VIDEO IN  
To Audio/Video  
OUT  
AUDIO IN (L)  
AUDIO IN (R)  
2. To connect the TV to a camcorder  
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.  
Camcorder  
Front of TV/DVD  
VIDEO IN  
To Audio/Video OUT  
AUDIO IN (R)  
AUDIO IN (L)  
Audio/Video cord (not supplied)  
3. To connect the TV to a TV Game  
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.  
1. Connect a TV Game to the LINE 2 (Front)  
Front of TV/DVD  
VIDEO IN  
AUDIO IN (R)  
To Audio/Video OUT  
AUDIO IN (L)  
Audio/Video cord (not supplied)  
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.  
Game timer function: After one hour the Game timer display will appear every 30  
minutes for about 5 seconds showing how long the time has passed up to 4 hours.  
Notes:  
You can also change the TV screen to LINE 2 by pressing INPUT SELECT. But this screen is normal.  
The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different  
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included  
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer  
or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
POWER  
Make sure the power cord is plugged in.  
Try another AC outlet.  
Power is off, check fuse or circuit breaker.  
Unplug unit, then plug it back in.  
10  
TV/DVD does not operate.  
TV BROADCAST RECEPTION  
Station or CATV experiencing problems, tune to another station.  
Check Volume adjustments.  
Check for sources of possible interference.  
14  
14  
48  
Poor sound or No sound  
14  
11,12  
48  
Station or CATV experiencing problems, tune to another station.  
Check antenna or CATV connections, reorient antenna.  
Check for sources of possible interference.  
Poor picture or No picture  
22  
Check picture control adjustments.  
Station or CATV experiencing problems, tune to another station.  
14  
Poor reception on some channels  
Station signal is weak, reorient antenna to receive weaker station. 11,12  
• Check for sources of possible interference.  
48  
Station or CATV experiencing problems, tune to another station.  
Make sure channels are set into memory.  
Check picture control adjustments.  
14  
18  
22  
Poor color or no color  
Check antenna or CATV connections, reorient antenna.  
Check for sources of possible interference.  
11,12  
48  
14  
18  
Station or CATV experiencing problems, tune to another station.  
Make sure channels are set into memory.  
CATV company is scrambling signal.  
Check antenna orientation.  
Check all CATV connections.  
Picture wobbles or drifts  
No CATV reception  
11  
12  
17  
14  
Set TV/CATV menu option to the CATV mode.  
Station or CATV system problems, try another station.  
Horizontal or diagonal bars on  
screen  
Check antenna connections, reorient antenna.  
Check for sources of possible interference.  
11,12  
48  
Make sure TV/CATV menu option is in the appropriate mode.  
If using antenna, check UHF antenna connections.  
17  
11  
No reception above channel 13  
No broadcast on station tuned.  
Sleep Timer is set.  
Power interrupted.  
18  
15  
TV shuts off  
TV station experiencing problems or program tuned is not closed  
captioned. Try another channel.  
Check CATV connection or VHF/UHF antenna, reposition or  
rotate antenna.  
Press CLOSED CAPTION button to turn on the closed caption  
decoder.  
18  
11,12  
16  
Closed - Caption is not activated.  
Display is not shown in your  
language.  
Select proper language in the menu options.  
13  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
No disc is inserted.  
The disc may be dirty. Clean up the disc.  
The unit cannot play CD-ROMs, etc.  
27  
25  
Playback doesnt start.  
No picture  
No sound  
TV/DVD selector is not set correctly.  
26  
Check the input selector of the amplifier is set properly.  
The unit is in the Special playback mode.  
Select the correct Audio Output position on AV amplifier.  
28  
44  
Picture is distorted during CUE or The picture will be distorted occasionally.  
REVIEW.  
Stopping playback, search, slow-  
motion play, repeat play, or  
program play, etc. cannot be  
performed.  
Some discs may not do some of the functions.  
No 4:3 (16:9) picture  
No on-screen display  
No surround sound  
The setup does not match your TV.  
Select Display On.  
34  
35  
44  
The setup does not match your stereo system.  
The unit or remote operation key  
is not functioning.  
Turn off the unit and unplug the AC power cord for several  
minutes, then replug it.  
Playback does not start when the Check the RATING LEVEL setup.  
title is selected.  
37,38  
Audio soundtrack and/or subtitle  
language is not changed when  
you play back a DVD.  
Multilingual language is not recorded on the DVD disc.  
41,42  
No subtitle  
Some discs have no subtitles.  
Subtitles are cleared. Press SUBTITLE.  
41  
Angle cannot be changed.  
appears on the screen.  
REMOTE CONTROL  
Multi-angles are not recorded on the DVD disc.  
33  
The function is prohibited with the unit or the disc.  
The remote control does not  
function.  
Aim at the remote control at the remote sensor.  
Operate within Approx. 5 Meters or reduce the light in the room.  
Clear the path of the beam.  
10  
The batteries are weak. Replace the batteries.  
Check the batteries are inserted correctly.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable  
TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV/VCR is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST  
or BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
Power supply:  
AC 120V 60Hz  
Power consumption:  
Operation: 75W  
Standby: 5W  
24.3lbs (11.0 kg)  
Weight:  
Dimensions:  
Width : 14-1/4 inches (362 mm)  
Height: 15-1/16 inches (382 mm)  
Depth : 14-3/8 inches (365 mm)  
5° - 40°C  
Operating temperature:  
Operating humidity:  
Less than 80%  
TELEVISION  
Picture tube:  
Type 13 (335 mm diagonal)  
Tuner type:  
Quartz PLL Frequency Synthesized  
Receiving channels:  
VHF  
UHF  
2-13  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
Antenna input:  
Speaker:  
Audio output power:  
VHF/UHF In 75 ohm coaxial  
3" (76 mm), 8 ohm x 2  
1.5W + 1.5W  
DVD/CD player  
Signal system:  
Applicable disc:  
NTSC  
1. DVD (12cm, 8cm)  
2. CD (12cm, 8cm)  
DVD: 4Hz - 22KHz  
CD: 4Hz - 20KHz  
90dB  
Audio characteristics:  
Frequency response:  
S/N Ratio:  
Harmonic distortion:  
Wow and flutter:  
Dynamic range:  
Input/Output:  
0.01%  
Below Measurable Level  
96dB  
Inputs : Video : (RCA) 1 Vp-p/75ohm  
Audio : (RCA) 8 dB/50Kohm  
Outputs : Video : (RCA) 1 Vp-p/75ohm  
Audio : (RCA) 8 dB/1Kohm  
0.5Vp-p 75ohms terminated  
CD : Wavelength: 775 - 815 nm  
Maximum output power: 0.5 mW  
DVD : Wavelength: 650 - 666 nm  
Maximum output power: 2.0 mW  
Digital audio out:  
Pickup:  
ACCESSORIES:  
Remote control x 1  
Batteries (2 x AAA)  
300 - 75 ohm Matching Transformer  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TOSHIBA COMBINATION TELEVISION  
AND DVD/CD PLAYER  
Toshiba America Consumer Products, Inc. ("TACP") and Toshiba Hawaii Inc. ("THI") make the following limited  
warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a  
gift from the original consumer purchaser and to no other purchaser or transferee .  
Limited Ninety (90) Day Warranty  
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of ninety  
(90) days after the date of original retail purchase. During this period, TACP and THI will repair a defective product or  
part, without charge to you. You must deliver the entire set to an Authorized TACP/THI Service Station. You pay for all  
transportation and insurance charges for the set to and from the Service Station.  
Limited One (1) Year Warranty  
TACP/THI further warrant the parts in this product against defects in materials or workmanship for a period of one  
year after the date of original retail purchase. During this period TACP/THI will replace a defective part without  
charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase  
you pay labor charges involved in the replacement. You must also deliver the entire product to a TACP/THI Autho-  
rized Service Station. You are responsible for all transportation for the set to and from the Service Station.  
Limited Two (2) Year Warranty of Picture Tube  
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a  
period of two (2) years after the date of original retail purchase. During this period, TACP/THI will replace a defective  
picture tube without charge to you except that if a defective picture tube is replaced after ninety (90) days from the  
date of the original retail purchase, you pay labor charges involved in the replacement. You are responsible for all  
charges involved in the replacement. you are responsible for all transportation and insurance charges for the set to  
and from the Service Station.  
Rental Units  
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm,  
whichever comes first.  
Commercial Units  
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube.  
Owner's Manual and Demographic Card  
You should read this owner's manual thoroughly before operating this product. You should complete and mail the  
enclosed Demographic card within ten days after you, or the person who has given you this product as a gift,  
purchased this product. This is one way to enable TACP/THI to provide you with better customer service and im-  
proved products. Failure to return the Demographic card will not affect your rights under this warranty.  
Your Responsibility  
The above warranties are subject to the following conditions:  
( 1 ) You must retain your bill of sale or provide other proof of purchase.  
( 2 ) All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.  
( 3 ) These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.  
( 4 ) Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of  
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems  
are your responsibility.  
( 5 ) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any  
product or parts which have been lost or discarded by you or to damage to products or parts caused by  
misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, improper  
installation, improper maintenance or use in violation of instructions furnished by us; or to units which have  
been altered or modified without authorization of TACP/THI .  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Obtain Warranty Service  
If after following all of the operating instructions in this manual and checking the section "Problems and trouble-  
shooting" and you still find that service is needed;  
( 1 ) Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the  
nearest Toshiba Authorized Service Station.  
( 2 ) Please present your bill of sale or other proof to the Authorized Service Station.  
"TACP/THI Authorized Service Station personnel will come to your home when warranty service is required.  
Depending on the type of repair required, the service will either be performed in your home or the set will be  
taken to the TACP/THI Authorized Service Station for repair and returned to your home at no cost to you"  
In the Continental United States contact:  
In Hawaii Contact:  
Toshiba Hawaii, Inc  
327 Kamakee Street,  
Honolulu, Hawaii 96814  
(808) 591-8377  
Toll Free  
1-800-631-3811  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular  
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any  
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,  
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of  
any parts. In no event shall TACP or THI be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obligation of  
TACP or THI arising under this warranty or under any statute, or law of the United States or any state thereof, is here  
by limited to 90 days from the date you discover or should have discovered, the defect. This limitation does not apply  
to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.  
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the  
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.  
ATTENTION CANADIAN CONSUMERS:  
Canadian consumers are requested to complete the special Canadian "Warranty Registration Form"  
enclosed, and forward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to  
"Register and Validate" their warranty.  
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.  
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.  
Rev. 09-01-98  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5C30201B U  
02/05  
Printed in Thailand  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam Personal Computer US 144 User Manual
Tektronix Network Card 80A03 User Manual
TERK Technologies Network Card XMDGM100 User Manual
Topfield Satellite TV System TF3100FEI User Manual
Toshiba Air Conditioner RAM SM560AT E User Manual
Toshiba CRT Television 35A44 User Manual
Toshiba Laptop U845t User Manual
Triarch Indoor Furnishings 30024 User Manual
Tricity Bendix Range TBE 635 User Manual
Varimixer Mixer W20P User Manual