Toshiba Projector TLP450E User Manual
CONTENTS  
1
OWNER’S MANUAL  
3LCD DATA PROJECTOR  
TLP4 5 0 E  
(
)
)
WITH DOCUMENT IMAGING CAMERA  
TLP4 5 1 E  
TLP6 5 0 E  
(
WITH DOCUMENT IMAGING CAMERA  
TLP6 5 1 E  
TXP4 5 0  
(
)
WITH DOCUMENT IMAGING CAMERA  
TXP4 5 1  
TXP6 5 0  
(
)
WITH DOCUMENT IMAGING CAMERA  
TXP6 5 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
3
Before use  
In the spaces provided below, record the Model and Serial No. located  
at the rear of your LCD projector.  
IMPORTANT PRECAUTIONS  
Model No.  
Serial No.  
Save Original Packing Materials  
The original shipping carton and packing materials will come in  
handy if you ever have to ship your LCD projector. For maximum  
protection, repack the set as it was originally packed at the factory.  
Retain this information for future reference.  
Avoid Volatile Liquid  
Do not use volatile liquids, such as an insect spray, near the unit.  
Do not leave rubber or plastic products touching the unit for a long  
time. They will mar the finish.  
Moisture Condensation  
Never operate this unit immediately after moving it from a cold  
location to a warm location. When the unit is exposed to such a  
change in temperature, moisture may condense on the crucial  
internal parts. To prevent the unit from possible damage, do not use  
the unit for at least 2 hours when there is an extreme or sudden  
change in temperature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
4
Before use  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE  
ALL WARNINGS AND  
3. Source of Light  
1. Read Owner’s Manual  
Do not look into the lens while the lamp is  
on. The strong light from the lamp may  
cause damage to your eyes or sight.  
After unpacking this product, read the  
owner’s manual carefully, and follow all the  
operating and other instructions.  
INSTRUCTIONS GIVEN IN THIS  
OWNER’S MANUAL AND THOSE  
MARKED ON THE UNIT. RETAIN  
THIS BOOKLET FOR FUTURE  
REFERENCE.  
This set has been designed and manufactured  
to assure personal safety. Improper use can  
result in electric shock or fire hazard. The  
safeguards incorporated in this unit will protect  
you if you observe the following procedures for  
installation, use and servicing. This unit is fully  
transistorized and does not contain any parts  
that can be repaired by the user.  
4. Ventilation  
Openings in the cabinet are provided for  
ventilation and to ensure reliable operation  
of the product and to protect it from  
overheating, and these openings must not  
be blocked or covered. The openings  
should never be blocked by placing the  
product on a bed, sofa, rug or other similar  
surface. This product should not be placed  
in a built-in installation such as a bookcase  
or rack unless proper ventilation is provided  
or the manufacturer’s instructions have  
been adhered to.  
2. Power Sources  
This product should be operated only from  
the type of power source indicated on the  
marking label. If you are not sure of the type  
of power supply to your home, consult your  
product dealer or local power company.  
For products intended to operate from  
battery power, or other sources, refer to the  
operating instructions.  
DO NOT REMOVE THE CABINET COVER, OR  
YOU MAY BE EXPOSED TO DANGEROUS  
VOLTAGE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL ONLY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
5
Before use  
IMPORTANT SAFETY INSTRUCTIONS  
5. Heat  
The product should be situated away from  
7. Cleaning  
Unplug this product from the wall outlet  
9. Overloading  
Do not overload wall outlets; extension  
heat sources such as radiators, heat  
registers, stoves, or other products  
(including amplifiers) that produce heat.  
before cleaning. Do not use liquid cleaners  
or aerosol cleaners. Use a damp cloth for  
cleaning.  
cords, or integral convenience receptacles  
as this can result in a risk of fire or electric  
shock.  
6. Water and Moisture  
8. Power-Cord Protection  
10. Lightning  
Do not use this product near water – for  
example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub; in a wet  
basement; or near a swimming pool and the  
like.  
Power-supply cords should be routed so  
that they are not likely to be walked on or  
pinched by items placed upon or against  
them, paying particular attention to cords at  
plugs, convenience receptacles, and the  
point where they exit from the product.  
For added protection for this product during  
storm, or when it is left unattended and  
unused for long periods of time, unplug it  
from the wall outlet.  
This will prevent damage to the product due  
to lightning and power-line surges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
6
Before use  
IMPORTANT SAFETY INSTRUCTIONS  
11. Object and Liquid Entry  
13. Stack Inhibited  
15. Accessories  
Never push objects of any kind into this  
product through openings as they may  
touch dangerous voltage points or short-out  
parts that could result in a fire or electric  
shock. Never spill liquid of any kind on the  
product.  
Do not stack other equipment on this  
product or do not place this product on the  
other equipment.  
Top and bottom plates of this product  
develops heat and may give some  
undesirable damage to other unit.  
Do not place this product on an unstable  
cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a  
child or adult, and serious damage to the  
product. Use only with a cart, stand, tripod,  
bracket, or table recommended by the  
manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use  
a mounting accessory recommended by the  
manufacturer.  
A product and cart combination should be  
moved with care. Quick stops, excessive  
force, and uneven surfaces may cause the  
product and cart combination to overturn.  
12. Do not place the product vertically  
Do not use the product in the upright  
position to project the pictures at the  
ceiling, or any other vertical positions.  
It may fall down and dangerous.  
14. Attachments  
Do not use attachments not recommended  
by the product manufacturer as they may  
cause hazards.  
S3125A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
7
Before use  
IMPORTANT SAFETY INSTRUCTIONS  
16. Damage Requiring Service  
17. Servicing  
Do not attempt to service this product  
19. Safety Check  
Unplug this product from the wall outlet and  
refer servicing to qualified service  
personnel under the following conditions:  
Upon completion of any service or repairs  
to this product, ask the service technician to  
perform safety checks to determine that the  
product is in proper operating condition.  
yourself as opening or removing covers  
may expose you to dangerous voltage or  
other hazards. Refer all servicing to  
qualified service personnel.  
a) When the power-supply cord or plug is  
damaged.  
b) If liquid has been spilled, or objects have  
fallen into the product.  
c) If the product has been exposed to rain or  
water.  
d) If the product does not operate normally by  
following the operating instructions. Adjust  
only those controls that are covered by the  
operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive  
work by a qualified technician to restore the  
product to its normal operation.  
20. Do not get your hands between the  
camera arm and the main unit when  
setting the camera arm back in its  
original position.  
18. Replacement Parts  
When replacement parts are required, be  
sure the service technician has used  
replacement parts specified by the  
manufacturer or have the same  
characteristics as the original part.  
Unauthorized substitutions may result in  
fire, electric shock, or other hazards.  
(Replacement of the lamp only should be  
made by users.)  
To avoid injury, be careful not to get your  
hands caught when setting the camera arm  
back in its original position. Families with  
children should be particularly careful.  
e) If the product has been dropped or  
damaged in any way.  
f) When the product exhibits a distinct change  
in performance – this indicates a need for  
service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
8
Before use  
IMPORTANT SAFETY INSTRUCTIONS  
21. Do not carry by the camera arm.  
23. Do not move the projector while the arm  
is still erect.  
Do not carry the projector by the camera  
arm.  
Doing so can result in damage or injury.  
Always store the arm back in position when  
moving the projector. Otherwise injury or  
damage may result.  
22. Do not leave documents on the unit for  
long periods of time while using the  
document imaging function.  
Do not leave texts, papers or other  
documents for projection on the unit for  
long periods of time. The heat could erase  
the letters on a thermal paper.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
9
Before use  
Power supply cord  
selection  
If your line voltage is 220 to 240, use one of the  
following types of cable.  
Plug  
configuration  
Plug type  
EURO  
Line voltage  
220 – 240V  
UK  
220 – 240V  
Use a 5A fuse which is approved by ASTA or  
BSI to BSI362.  
Always replace the fuse cover after changing  
the fuse.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
10  
Before use  
Contents  
Before use  
Camera  
SAFETY PRECAUTIONS ............................................................... 2  
IMPORTANT PRECAUTIONS....................................................... 3  
IMPORTANT SAFETY INSTRUCTIONS ..................................... 4  
Power supply cord selection ............................................................. 9  
Part names and functions .............................................................. 11  
Part names and functions of document imaging camera ............. 35  
Picture projection with the document imaging camera ................ 37  
Overlaying projection ..................................................................... 39  
Connections and installation  
Maintenance  
Connections .................................................................................... 16  
Projector placement........................................................................ 18  
Trouble indications ......................................................................... 40  
Air filter, lens and main unit cleaning........................................... 41  
Lamp replacement .......................................................................... 42  
Operations  
Others  
Picture projection ........................................................................... 21  
Operating the computer by the remote control.............................. 25  
Before calling service personnel .................................................... 43  
Input signal ..................................................................................... 45  
Adjustments with RS-232C ............................................................ 49  
Specifications .................................................................................. 51  
Adjustments  
Setting and adjustments on the menu............................................ 27  
Initial settings – Default ................................................................. 28  
Keystone correction – Keystone ..................................................... 30  
Projection adjustments – Image..................................................... 31  
Picture adjustments – Picture ........................................................ 32  
Sound adjustments – Audio............................................................ 33  
Saving data – Save.......................................................................... 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
11  
Before use  
Part names and functions  
Control panel  
ON/STANDBY button  
To turn the projector on or off.  
21  
1
2
3
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
MENU button  
27  
Main unit  
To display or close the menu.  
SELECT/ADJUST button  
28  
(
/
/
/
)
1
2
3
4
5
6
7
8
To select items or adjust values on the  
menu.  
ENTER button  
To enter your selection on the menu.  
30  
4
5
Lens cover  
Zooming ring  
Focusing ring  
21  
21  
INPUT button  
To select the input source.  
21  
Projection lens  
ON indicator  
21 40  
Exhaust holes  
6
7
8
LAMP indicator  
TEMP indicator  
21 40  
40  
Intake holes  
Foot adjuster  
release button  
20  
Infrared remote sensor  
Foot adjuster  
20  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
12  
Before use  
(Continued)  
Left side  
Right side  
1
2
3
4
RS-232C  
RGB  
AUDIO  
RGB  
AUDIO  
CONTROL  
MONITOR OUTPUT  
RGB INPUT  
VIDEO INPUT  
Carrying handle  
Open to carry the projetor.  
AC IN socket  
S-VIDEO VIDEO  
L - AUDIO -R  
19  
Rear side  
CONTROL connector  
To connect a computer to control the projector.  
17 49  
1
MONITOR OUTPUT connectors  
2
(RGB output, AUDIO output)  
17  
Speaker  
Infrared remote sensor  
To connect to a monitor or audio equipment.  
RGB INPUT connectors (RGB input, AUDIO input)  
To connect a computer, etc.  
3
4
16  
Intake holes  
VIDEO INPUT connectors  
(S-VIDEO input, VIDEO input, AUDIO input)  
17  
To connect a video equipment, etc.  
Document imaging camera model  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
13  
Before use  
(Continued)  
AVOID EXPOSURE-LASER  
RADIATION IS EMITTED  
FROM THIS APERTURE  
MADE IN JAPAN  
Location of the labels  
REAR  
Remote control  
AUTO SET ON/STANDBY  
KEYSTONE  
MARKER  
LASER  
POINTER  
PJ  
RAYONNEMENT LASER  
CAUTION  
NE PAS REGARDER DANS LE FAISCEAU  
APPAREIL A LASER DE CLASSE 2  
LONGUEUR D'ONDE: 645nm  
Caution - use of controls or adjustments or  
performance of procedures other than those  
specified herein may result in hazardous  
radiation exposure.  
L-CLICK  
MENU  
R-CLICK  
ENTER  
LASER RADIATION  
RGB  
VIDEO CAMERA  
DO NOT STARE INTO BEAM  
RESIZE RESET FREEZE  
PUISSANCE MAXIMA: 1mW  
WAVE LENGTH :  
MAX OUTPUT  
645nm  
1mW  
:
LASER -STRAHLUNG  
MANUFACTURER  
NIGHT IN DEN STRAHL  
BLICKEN LASER KLASS 2  
WELLENLÄNGE: 645nm  
MAX AUSGANGSLEISTUNG: 1mW  
CLASS II LASER PRODUCT  
COMPLIES WITH DHHS 21 CFR SUBCHAPTER J  
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.  
82 TOTOWA RD., WAYNE, NJ 07470, U.S.A.  
JUNE 1999  
PLACE OF  
MANUFACTURER:A  
EN60825-1:1994+A11  
REMOTE CONTROL  
MODEL CT-90009  
Laser emission part  
* Functions when the POINTER/PJ selector is  
set to “POINTER”.  
POINTER/PJ selector  
To switch the operation modes of the  
remote control.  
POINTER: To operate a computer. (The  
supplied REMOTE MOUSE RECEIVER  
should be connected to the computer.)  
PJ: To operate the projector.  
26  
AUTO SET button  
To adjust the image automaticcally.  
AUTO SET  
ON/STANDBY  
LASER  
23  
1
4
5
KEYSTONE  
9
1
2
10  
MARKER  
KEYSTONE button  
To correct the keystone distortion of the  
picture automatically.  
2
22  
POINTER  
PJ  
3
4
MARKER button  
3
11  
,
,
(–), (+) button  
28  
/
To display a marker on the screen.  
Each time the button is pressed, the  
marker changes the shape, and finally  
disappears.  
Pointer control*  
26  
• To select items or adjust values on the  
menu.  
• To shift a picture after changing its size  
with the RESIZE button.  
• To move the marker displayed with the  
MARKER button.  
L-CLICK  
MENU  
R-CLICK  
ENTER  
12  
13  
14  
5
6
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
15  
16  
17  
• To move the pointer of the computer.*  
• To substitute for the L-CLICK button by  
pressing the center.*  
MUTE CALL  
7
8
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
14  
Before use  
MUTE button  
To cut off the picture and sound  
temporarily.  
23  
16  
17  
(Continued)  
L-CLICK button*  
• To left-click.*  
/ MENU button  
28  
26  
6
CALL button  
To display the current input source and  
23  
Laser emission part  
• To display or close the menu.  
signal status information.  
RGB button  
To select the RGB input.  
21  
7
8
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
9
1
2
Installing batteries  
RESIZE button  
To change the picture size.  
24  
10  
LASER  
1) Open the cover.  
POINTER  
PJ  
ON/STANDBY button  
To turn the projector on or off.  
21  
9
3
4
11  
LASER button  
To display the laser pointer by pointing the  
laser emission part toward the screen.  
10  
L-CLICK  
MENU  
R-CLICK  
ENTER  
12  
13  
14  
5
6
R-CLICK button*  
• To right-click.*  
• To enter your selection on the menu.  
/ ENTER button  
28  
11  
26  
RGB  
VIDEO CAMERA  
2) Install the batteries.  
RESIZE RESET FREEZE  
Make sure that the +/– polarities match the  
illustration in the compartment.  
VIDEO button  
To select the video input.  
21  
12  
13  
15  
16  
17  
7
8
MUTE CALL  
CAMERA button (for document imaging  
camera model only)  
To select the camera input.  
37  
RESET button  
To restore the settings and adjustments to  
the default.  
29  
14  
15  
FREEZE button  
To freeze the picture.  
23  
3) Attach the cover.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
15  
Before use  
Notes  
Remote control operation  
(Continued)  
• The remote control may not operate when  
there is sunlight or other strong light such as  
a fluorescent lamp shining on the remote  
sensor.  
• Operate the remote control from a position  
where the remote sensor is visible.  
• Do not drop the remote control or otherwise  
jolt it.  
• Keep the remote control out of locations with  
excessively high temperature or humidity.  
• Do not get water on the remote control or  
place wet objects on it.  
• Do not disassemble the remote control.  
• Under unusual circumstances the remote  
control may not operate well due to the  
location being used or the surroundings.  
At such times, change the direction of the  
remote control to the projector and retry the  
operation.  
Point the remote control at the infrared  
remote sensor and press a button.  
Notes  
Using batteries incorrectly can cause them to  
leak or burst. Strictly observe the following.  
• Install the batteries with their + and – ends  
facing correctly.  
• Do not charge, heat, disassemble, or short  
the batteries or throw them into a fire.  
• Do not leave exhausted batteries in the  
remote control.  
• Do not mix different types of batteries or new  
and old batteries.  
• When you will not be using the remote control  
for a prolonged period, take the batteries out  
of the remote control.  
Rear side  
Front side  
15°  
15°  
15°  
15°  
Rear side (document imaging camera model)  
• When the remote control stops working or  
only works from very close distance, replace  
all the batteries with new ones.  
• When replacing the batteries, use a more  
longer life alkaline batteries.  
15°  
15°  
• If a battery leaks, carefully wipe off any  
residue inside the battery case before loading  
new batteries.  
Distance : within about 5 meters from the front  
of the remote sensor.  
Angle :  
within about 15° of the remote  
sensor in every direction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
16  
Connections and installation  
Connections  
Connecting an IBM PC or compatible computer (DOS/V)  
Connecting a Macintosh computer  
Check that the power for the projector and computer is off before  
connecting the cables.  
• Attach the supplied adapter for Macintosh computers.  
• Check that the power for the projector and computer is off before  
connecting the cables.  
Connect when you  
Laptop  
computers  
Desktop  
computers  
want to view a picture  
Laptop  
computers  
Desktop  
computers  
on the computer monitor.  
RS-232C  
CONTROL  
AUDIO  
A
RS-232C  
CONTROL  
RGB  
AUDIO  
AO  
R OUTPUT  
B INPUT  
MONITOR OUTPUT  
B INPUT  
or  
or  
VIDEO INPUT  
VIDEO INPUT  
S-VIDEO VIDE
L
-
AUDIO
S-VIDEO VIDE
L
-
AUDIO
To monitor port  
To  
Adapter for Macintosh  
computers (supplied)  
To  
RGB  
INPUT  
(RGB)  
To  
To  
MONITOR  
OUTPUT  
(RGB)  
RGB  
RGB  
Computer  
monitor  
cable  
INPUT  
(AUDIO)  
INPUT  
(AUDIO)  
To audio output port  
To  
monitor  
port  
To  
audio  
output port  
To RGB  
INPUT (RGB)  
RGB cable (supplied)  
PC audio cable (supplied)  
RGB cable (supplied)  
PC audio cable (supplied)  
Notes  
Notes  
• The projector cannot be connected to a computer that does not have  
an analog RGB output terminal. For details, refer to the computer  
manual.  
• The projector cannot be connected to a computer that does not have  
an analog RGB output terminal. For details, refer to the computer  
manual.  
• You may not be able to connect some computers to the projector. For  
details, consult the dealer.  
• You may not be able to connect some computers to the projector. For  
details, consult the dealer.  
• If NTSC/PAL/SECAM signals are input to the RGB INPUT connector,  
they cannot be displayed. (Input NTSC/PAL/SECAM signals to the  
VIDEO INPUT jack.)  
• The adapter for Macintosh computers is conformable to MULTIPLE  
SCAN 21.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
17  
Connections and installation  
(Continued)  
Connecting video equipment  
Output terminals  
Check that the power for the projector and computer is off before  
connecting the cables.  
Check that the power for the projector and computer is off before  
connecting the cables.  
(not supplied)  
To C (P ) output  
R
R
To C (P ) output  
B
B
Audio cable (not supplied)  
RS-232C  
CONTROL  
RGB  
A
RGB  
AUDIO  
MONITOR OUT
RGB INPUT  
To Y output  
To audio output R  
(red)  
VIDEO INPUT  
To audio output L  
VIDEO VIDEO  
L
-
AUDIO -R  
(white)  
You can connect an  
extra monitor to view  
the picture.  
To RGB  
INPUT  
To RGB  
INPUT  
(RGB)  
(AUDIO)  
Video player with color difference output  
RS-232C  
CONTROL  
RGB  
AUDIO  
RGB  
AUDIO  
MONITOR OUTPUT  
RGB INPUT  
To MONITOR OUTPUT (AUDIO)  
Ø3.5mm STEREO mini plug  
(Audio output level is constant.)  
You can connect a computer  
to control the projector.  
49  
To VIDEO INPUT (VIDEO) (yellow)  
To VIDEO INPUT (AUDIO L) (white)  
To VIDEO INPUT (AUDIO R) (red)  
VIDEO INPUT  
S-VIDEO VIDO  
L
-
AUDIO -R  
Audio cable  
(not supplied)  
To VIDEO  
INPUT  
(S-VIDEO)  
Audio/Video cable (supplied)  
To audio input  
To Video output (yellow)  
To Audio output (white)  
To Audio output (red)  
S-VIDEO cable (not supplied)  
To S-VIDEO output  
Connect a stereo system  
for dynamic sound.  
Video tape player  
Note  
Notes  
Signal input to the S-VIDEO jack takes priority over that to the VIDEO  
jack.  
• Sound of the source which you select is output to the connected  
stereo system, etc.  
• The MONITOR OUTPUT connector always sends out a signal which  
is input to the RGB INPUT connector regardless of your source  
selection.  
• Even while the projector is in standby mode, the MONITOR OUTPUT  
connector continues its output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
18  
Connections and installation  
Floor-mounted front projection  
Viewing a picture projected on the front of  
the screen from a floor.  
Floor-mounted rear projection  
Viewing a picture projected through the  
back of the screen from a floor installation.  
Projector placement  
There are four ways of installing this projector  
as shown right. This section explains the  
standard case of the floor-mounted front  
projection.  
Translucent screen  
Viewer  
Viewer  
CAUTION  
• When a ceiling mount is required, please  
consult with the dealer.  
• When carrying the unit, always handle the  
carrying handle.  
Ceiling-mounted front projection  
Ceiling-mounted rear projection  
Preparation  
• Select a room that can be darkened.  
• Refer to the table on the next page  
the screen size and required distance.  
(The document imaging camera model  
could not be mounted on the ceiling.)  
Viewing a picture projected on the front of  
the screen from a ceiling installation.  
(The document imaging camera model  
could not be mounted on the ceiling.)  
Viewing a picture projected through the  
back of the screen from a ceiling  
installation.  
for  
19  
Translucent screen  
Viewer  
Viewer  
• When installed the projector in the way except the floor-mounted front projection, make the  
setting of the projecting orientation on the menu.  
28  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
19  
Connections and installation  
(Continued)  
Adjust the distance between  
the lens and the screen.  
The projection size depends on the  
distance between the lens and the  
screen.  
Connect the power cord.  
• Insert one end in the AC IN socket on  
the projector.  
2
3
Place the projector on a steady,  
level surface such as a table.  
1
• Insert the other end in a wall outlet.  
Point the projector squarely at the screen  
for the best possible picture.  
Adjust the projection size by changing the  
distances as shown below.  
Top view  
Screen  
Screen  
Lens  
90°  
To a wall outlet.  
90°  
The ON indicator lights in orange and the  
projector turns to standby mode.  
b
a
Take off the lens cover.  
4
Point the lens straight at the center of the  
screen as above.  
a: Distance between the lens and the screen  
b: Distance between the lens height and the  
bottom of projection area  
Side view  
Screen  
a (m)  
Screen size  
(inches)  
23  
Minimum Maximum  
(WIDE)  
–
1.56  
2.373  
3.186  
3.999  
6.031  
8.064  
10.096  
(TELE)  
1.132  
2.017  
3.059  
4.1  
b (cm)  
4
40  
60  
80  
100  
150  
200  
250  
6
9
90°  
12  
15  
23  
30  
38  
4.142  
7.746  
10.35  
–
Place the projector horizontally so that the  
projecting light hits the screen squarely.  
• The values are approximations.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
20  
Connections and installation  
3) To put the foot adjuster back, hold down  
the foot adjuster release button and  
lower the front slowly.  
How to use the foot adjuster  
(Continued)  
The tilt of the projector can be adjusted using  
the foot adjuster.  
Notes  
The foot adjuster will put back.  
• When the projector is moved from a cold  
location to a warm location, or when the  
ambient temperature in the projection room  
has risen suddenly, moisture may condense  
on the lens or the mirror to blur the projected  
pictures. In such a case, leave the projector  
for an adequate time (1 to 2 hours, depending  
on the room’s condition) before using it so it  
adjusts to the ambient temperature.  
• If the screen is exposed to direct sunlight or  
other strong light, the projected picture  
becomes too faint to see. Shut out the light  
with curtains or other means.  
1) Lift the front of the projector until a tilt  
angle desired is obtained and hold down  
the foot adjuster release button.  
Note  
Be sure to hold the projector when putting the  
foot adjuster back so as not to let the front fall  
on your fingers.  
The foot adjuster will stretch.  
Release the button to lock in position.  
• If the screen and the projector are not  
installed properly, the projected picture may  
be distorted.  
Foot adjuster  
release button  
Foot adjuster  
• If the projector is tilted, the picture may be  
distorted. To obtain the best possible picture,  
place the projector so it faces the screen  
squarely.  
2) Turn the foot adjuster to make fine  
adjustment of the height.  
Turn clockwise to lift up.  
Turn counterclockwise to lower.  
Lift up  
Lower  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
21  
Operations  
Select the input source.  
(On the remote control)  
3
Picture projection  
Press RGB or VIDEO.  
AUTO SET  
ON/STANDBY  
LASER  
(On the control panel of the main unit)  
Press INPUT repeatedly.  
KEYSTONE  
CAUTION  
Do not look into the projection lens while  
operating the projector.  
1
3
MARKER  
POINTER  
PJ  
Each time the button is pressed, the  
source indication on the screen changes  
as follows:  
Preparation  
• Install and connect the projector properly.  
• Take off the lens cover.  
L-CLICK  
MENU  
R-CLICK  
ENTER  
→
RGB:  
To project pictures from a  
computer connected to RGB  
INPUT.  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
• Set the POINTER/PJ to “PJ”.  
Video:  
To project pictures from a  
video player connected to  
VIDEO INPUT.  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Camera: To project pictures from a  
document imaging camera.  
(For document imaging  
Press ON/STANDBY.  
Both the ON and LAMP indicators light up  
in green.  
1
2
Indicators  
1
3
camera model only)  
ON  
ON  
Adjust the picture size by  
turning the zooming ring.  
Turn to the right to enlarge the picture.  
Turn to the left to reduce the picture.  
On (Green)  
On (Green)  
On (Green)  
4
5
LAMP  
LAMP  
Flashing (Green)  
Turn on the connected  
equipment and put it in  
playback mode.  
Focus on the picture by  
turning the focusing ring.  
A still picture is recommended for  
focusing.  
5
4
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
22  
Operations  
Notes  
(Continued)  
• Even after turning the power off, the intake  
and exhaust fans continue to work for about 3  
minutes more to cool the inside of the  
projector.  
• Immediately after the power off, the projector  
may not be turned on while the LAMP  
indicator is flashing in green.  
Notes  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
• “  
” is displayed on the screen if the  
projector does not receive any signal from the  
LAMP  
TEMP  
connected equipment. Put the equipment in  
playback mode.  
• Due to the lamp characteristic, flickers may  
occasionally occur in a picture. This is not  
malfunction of the unit.  
• When an RGB source is selected and no  
signal is sent from the computer for about 30  
minutes, the projector turns to standby mode  
for power saving. It automatically turns on  
when the signal resumes. Pressing  
ON/STANDBY also turns it on.  
ON/STANDBY  
Indicators  
• Before unplugging the power cord, make sure  
that the fans are stopped.  
AUTO SET  
ON/STANDBY  
KEYSTONE  
ON/STANDBY  
KEYSTONE  
MARKER  
LASER  
Correcting the keystone distortion  
POINTER  
PJ  
A picture may be expanded on the upper side if  
projected upward from the projector lifted up by  
the foot adjuster. The projector can correct this  
keystone distortion automatically.  
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
• While operating the projector, “  
displayed on the screen. This means that the  
operation cannot be completed.  
” may be  
RESIZE RESET FREEZE  
Press KEYSTONE.  
The keystone distortion is corrected  
automatically.  
To correct further, make the “Keystone”  
adjustment on the menu.  
30  
Turning the power off  
1) Press ON/STANDBY after using the  
projector.  
An instruction message appears.  
2) Press ON/STANDBY again.  
The LAMP indicator turns off, and the  
projector turns to standby mode. (The ON  
idicator lights in orange.)  
3) After confirming the exhaust fan stops,  
unplug the power cord.  
The ON indicator turns off.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
23  
Operations  
2) Press MUTE again.  
Contents of displayed items  
(Continued)  
The picture is also cut off temporarily.  
<
S T A TUS  
>
“
” appears.  
I NPUT : RGB  
To restore, press MUTE again.  
S I GNA L : XGA 6 0 H z  
SCREEN : XGA 6 0  
SYNCHV : N / N  
AUTO SET  
ON/STANDBY  
LASER  
KEYSTONE  
Note  
AUTO SET  
MARKER  
If you press MUTE while the menu is displayed,  
the menu disappears.  
POINTER  
PJ  
Freezing the picture  
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
Press FREEZE.  
RESIZE RESET FREEZE  
FREEZE  
The picture freezes.  
MUTE CALL  
Current input source  
“
” mark appears on the up right corner of the  
CALL  
Signal system of the input source  
Signal system automatically detected  
by the projector  
screen.  
MUTE  
To release the picture, press FREEZE again.  
(Mode determination  
Synchronizing polarity of input signal  
P=Positive N=Negative  
)
45  
Any other operations can also release the  
picture.  
Adjusting the image automatically  
Note  
An image which is flickering, blurred or is not  
centered, can be adjusted automatically.  
This function is convenient for the case where  
you are using the document imaging camera  
model and change documents to project  
through the camera.  
Note  
If you press CALL while the menu is displayed,  
the menu disappears.  
Press AUTO SET.  
The image is adjusted automatically.  
To adjust further, make the “Image” adjustment  
Displaying the input source  
information  
on the menu.  
31  
Cutting off the picture and sound  
temporarily  
Press CALL.  
The current input source and the signal status  
information is displayed.  
1) Press MUTE.  
To close the display, press CALL again.  
The sound is cut off temporarily.  
“
” appears.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
24  
Operations  
When the picture size is smaller than the  
projection area:  
(Continued)  
: To move the picture upward  
: To move the picture down  
: To move the picture leftward  
: To move the picture rightward  
AUTO SET  
ON/STANDBY  
LASER  
KEYSTONE  
MARKER  
POINTER  
PJ  
When the picture size is larger than the  
projection area:  
,
,
,
: To view the upper side of the picture  
: To view the lower side of the picture  
: To view the left side of the picture  
: To view the right side of the picture  
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
RESET  
RESIZE  
MUTE CALL  
Notes  
• Picture size returns to normal after the power  
is turned off. The values are not saved.  
• You may not change the picture size  
depending to the signal.  
• Pictures of VGA signals, etc. may be slightly  
inferior in quality at the initial size because  
they are enlarged.  
Changing the picture size  
Pictures are projected at the maximal  
projection size regardless of the signal types.  
Optionally you can change the picture size to  
through size or enlarge it.  
• The picture returns to the normal position  
when the RESET button is pressed after the  
picture is moved.  
• The picture may not be projected properly  
while moving the picture.  
Press RESIZE.  
Each time the button is pressed, the picture  
size changes from the center of the picture.  
When the picture size does not correspond with  
the projection area, the picture can be moved  
by pressing  
,
,
and  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
25  
Operations  
Notes  
If you connect the iREMOTE MOUSE  
RECEIVER to the computer, the supplied  
remote control can work as a mouse of the  
computer.  
Operating the computer  
by the remote control  
• To operate the projector and the computer by  
the remote control, place the REMOTE  
MOUSE RECEIVER close to the projector.  
• When connecting the REMOTE MOUSE  
RECEIVER to an IBM PC/DOS V computer,  
use the supplied PS/2 mouse adapter if you  
are using a PS/2 mouse, or connect the  
supplied IBM/MAC cable directly to your  
computer if you are using a serial mouse.  
• When connecting the REMOTE MOUSE  
RECEIVER to the USB PORT for the first  
time, insert the “Windows98 CD-ROM” and  
install the device drivers for a USB  
Connecting the REMOTE MOUSE RECEIVER  
Check that the power of the computer is turned off.  
Connect the REMOTE MOUSE RECEIVER.  
Remove the mouse actually used and change it to the supplied cable.  
interchangeability device and a USB human  
interface devices (two kinds). The installation  
starts automatically when you connect a USB  
mouse cable connected to the remote mouse  
receiver to the USB port of your computer.  
USB Mouse cable  
(supplied)  
USB  
PORT  
IBM PC  
DOS/V  
PV-98 IBM/Mac  
USB  
SERIAL  
PORT  
PS/2  
Mouse adapter  
(supplied)  
IBM/MAC  
Mouse cable  
(supplied)  
PS/2  
MOUSE  
PORT  
MAC  
Mouse adapter  
(supplied)  
Macintosh  
MAC  
MOUSE  
PORT  
REMOTE MOUSE RECEIVER  
(supplied)  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
26  
Operations  
To drag and drop  
(Continued)  
While holding down the center of the pointer  
control, press the rim and release the  
center.  
Operating the computer by the  
remote control  
Notes  
Use the supplied remote control pointing it at  
the connected REMOTE MOUSE RECEIVER.  
• The remote control operating range is about 5  
meter from the front of the remote sensor.  
• The remote control may not operate when  
there is sunlight or other strong light such as  
a fluorescent lamp shining on the remote  
sensor.  
AUTO SET  
ON/STANDBY  
LASER  
KEYSTONE  
MARKER  
POINTER  
PJ  
POINTER/PJ  
selector  
Pointer control  
L-CLICK  
MENU  
R-CLICK  
ENTER  
R-CLICK  
L-CLICK  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
Preparation  
Set the POINTER/PJ selector to “POINTER”.  
To move the pointer  
Press the pointer control.  
The pointer moves to the pressed direction.  
To left-click  
Press L-CLICK.  
To right-click  
Press R-CLICK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
27  
Adjustments  
H-position : To shift the image position  
horizontally  
Bass :  
To adjust the bass of the sound  
output.  
Settings and adjustments on  
the menu  
V-position : To shift the image position  
vertically.  
Treble :  
To adjust the treble of the sound  
output.  
Clock :  
To adjust the clock frequency.  
Most of adjustments and settings are made on  
the menu.  
To display the menu, press MENU.  
Picture  
Default  
28  
32  
Contrast : To adjust the contrast.  
Brightness : To adjust the brightness.  
Language : To select the language for displays.  
Proj. mode :To set the projecting orientation  
according to the way of installation.  
Color :  
Tint :  
To adjust the color depth.  
To adjust the tint.  
RGB input : To set the signal type of RGB  
input.  
The followings are adjustments and settings on  
Sharpness : To adjust the sharpness.  
the menu. For details, see page in  
.
29  
Video signal : To set the signal type of video  
input.  
R-level :  
G-level :  
B-level :  
To adjust the amount of red in the  
picture.  
When using this projector for the first time, see  
“Default”.  
28  
Scrn display : To use or disable on-screen  
displays.  
To adjust the amount of green in  
the picture.  
To adjust the amount of blue in the  
picture.  
30  
Keystone  
Save  
34  
Camera gain : To adjust the sensitivity of the  
document imaging camera.  
(For document imaging camera  
model only)  
Auto set : To correct the keystone distortion  
automatically.  
Save data : To save the adjustments and  
settings on the menu.  
Adjust :  
To make the correction of keystone  
distortion beyond the automatic  
correction.  
All preset : To restore the adjustments and  
setings on the menu to the factory  
set.  
Audio  
33  
Volume :  
To adjust the sound volume of the  
speaker.  
Image  
31  
Auto sync. : To adjust the image automatically.  
Phase : To adjust the phase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
28  
Adjustments  
Proj. mode  
Confirm your installation type on the  
chart on page  
Press or to select  
.
2
Initial settings  
– Default  
.
18  
De f a u l t  
Standard: Floor-mounted front  
projection  
L a n g u a g e  
P r o j . mo d e  
RGB i n p u t  
E n g l i s h  
S t a n d a r d  
R G B  
Make the basic settings for projecting.  
Ceiling:  
Ceiling-mounted front  
projection  
Preparation  
Rear:  
Floor-mounted rear  
projection  
Ceiling-mounted rear  
projection  
V i d e o s i g n a l A u t o  
S c r n d i s p l a y On  
• Display the image as explained in “Picture  
Projection”.  
21  
R. ceil.:  
• Set the POINTER/PJ selector to “PJ”.  
SELECT/ADJUST  
ON  
Press or to select a  
preferred item.  
ON/STANDBY  
MENU  
ENTER  
INPUT  
3
4
RGB input  
LAMP  
TEMP  
To set the signal type of RGB input.  
RGB:  
Y/Pb/Pr:  
RGB signal  
Press or to make the  
setting.  
Color difference (Component)  
video signal from the DVD  
video player, etc.  
To select another item, go back to step 3.  
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
2-4  
Language  
Video signal  
LASER  
Select a language for the menu or on-  
screen displays.  
POINTER  
PJ  
To set the signal type of video input.  
Auto:  
1,5  
Automatic signal detection  
works on video input. If it  
does not properly, set the  
signal type of the source  
from the followings.  
English:  
:
Français:  
Deutsch:  
Italiano :  
Español :  
English  
Japanese  
French  
German  
Italian  
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
RESET  
NTSC M:  
NTSC443A: NTSC4.43A signal  
NTSC J:  
NTSC N:  
NTSC443B: NTSC4.43B signal  
NTSC M signal  
Spanish  
Português : Portuguese  
NTSC J signal  
NTSC N signal  
Press MENU to display the menu.  
1
PAL:  
PAL signal  
PAL N:  
SECAM:  
PAL443:  
PAL M:  
PAL N signal  
SECAM signal  
PAL4.43 signal  
PAL M signal  
Ke y s t o n e  
A u t o s e t  
–
+
A d j u s t  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
29  
Adjustments  
(Continued)  
Scrn display  
On:  
On-screen displays  
(indications of input  
selection, signal absent or  
mute mode, etc.) appear.  
On-screen displays do  
not appear.  
Off:  
Press MENU.  
The menu disappears.  
5
Notes  
• These settings are stored until you turn the  
power off.  
• To store the settings even if the power is  
turned off, follow the procedure of “Saving  
data”.  
34  
• Pressing RESET will return all the  
adjustments or settings currently displayed to  
their default.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
30  
Adjustments  
Notes  
Press MENU to display the  
menu.  
1
2
Keystone correction  
– Keystone  
• Pressing KEYSTONE on the remote control  
can also correct the keystone distortion  
automatically.  
22  
• These adjustments are stored until you turn  
the power off.  
• Pressing RESET will return all the  
adjustments or settings currently displayed to  
their default.  
Press or to select  
.
Preparation  
• Display the image as explained in “Picture  
Ke y s t o n e  
Projection”.  
• Set the POINTER/PJ selector to “PJ”.  
21  
A u t o s e t  
–
+
A d j u s t  
• Pictures may be slightly deteriorated by the  
keystone correction.  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Press to select “Auto set”.  
Press ENTER.  
The keystone distortion is corrected  
automatically. For further correction,  
follow the below steps.  
3
4
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
KEYSTONE  
LASER  
POINTER  
PJ  
2,3,5,6  
1,7  
Press .  
5
6
4
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
Press or to correct the  
distortion.  
RESIZE RESET FREEZE  
RESET  
(–):To reduce the upper width.  
(+): To expand the upper width.  
Press MENU.  
The menu disappears.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
31  
Adjustments  
Notes  
Projection adjustments  
– Image  
• Pressing AUTO SET on the remote control  
can also adjust the image automatically.  
23  
I ma g e  
A u t o s y n c .  
• If you project an image from a computer with  
an LCD screen while monitoring the image on  
the computer, the image may not be projected  
properly, depending on the computer model.  
In this case, turn off the computer display, or  
make the necessary picture adjustments on  
the projector. For details on controlling the  
computer display, etc., refer to the computer’s  
manual and description on the software for  
the computer used.  
• During adjustments of “H-position” or “V-  
position”, the image may not be projected  
properly.  
• While using, an aberration of the phase may  
occur. In that case, adjust “Phase” again.  
• These adjustments are stored until you turn  
the power off.  
Preparation  
• Display the image as explained in “Picture  
–
–
–
–
+
+
+
+
P h a s e  
H – p o s i  
V – p o s i  
C l o c k  
t
t
i o n  
i o n  
Projection”.  
• Set the POINTER/PJ selector to “PJ”.  
21  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Press to select “Auto sync.”  
Press ENTER.  
The image is automatically adjusted.  
For further adjustments, follow the below  
steps.  
3
4
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
AUTO SET  
LASER  
POINTER  
PJ  
2,3,5,6  
1,7  
• To store the adjustments even if the power is  
turned off, follow the procedure of “Saving  
Press or to select a  
preferred item.  
4
5
6
L-CLICK  
MENU  
R-CLICK  
ENTER  
data”.  
34  
RGB  
VIDEO CAMERA  
• Pressing RESET will return all the  
adjustments or settings currently displayed to  
their default.  
RESIZE RESET FREEZE  
Press or to adjust the  
item.  
RESET  
To select another item, go back to step 5.  
Phase:  
To reduce flickers.  
H-position: To shift the image to the  
left (–), to the right (+).  
V-position: To shift the image down (–),  
to up (+).  
Press MENU to display the  
menu.  
1
2
Clock  
To remove vertical stripes.  
Press or to select  
.
Press MENU.  
7
The menu disappears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
32  
Adjustments  
Camera gain: (For document imaging  
camera model only)  
–
–
–
–
–
–
+
+
+
+
+
+
T i n t  
Picture adjustments  
– Picture  
S h a r p n e s s  
R - l e v e l  
G - l e v e l  
B - l e v e l  
C ame r a g a i n  
(–) To lower the camera  
sensitivity when the  
subject is too bright.  
(+) To raise the camera  
sensitivity when the  
subject is too dark.  
Preparation  
• Display the image as explained in “Picture  
Projection”.  
• Set the POINTER/PJ selector to “PJ”.  
21  
SELECT/ADJUST  
ON  
Press or to select a  
preferred item.  
3
4
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Press MENU.  
The menu disappears.  
5
Press or to adjust the item.  
To select another item, go back to step 3.  
Notes  
• The adjustment can be stored on each input  
source (RGB, Video, Camera).  
• “Tint” adjustment is not available for PAL nor  
SECAM signals.  
• “Color”, “Tint” and “Sharpness” adjustments  
are not possible when RGB input is selected.  
• “Tint” and “Sharpness” adjustments are not  
possible when camera input is selected.  
• “Tint” and “Sharpness” adjustments are not  
possible when Y/Pb/Pr signals are input.  
• These adjustments are stored until you turn  
the power off.  
– :  
+ :  
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
Contrast : (–) Lower  
(+) Higher  
2-4  
LASER  
POINTER  
PJ  
Brightness  
:
(–) Darker  
(+) Brighter  
1,5  
L-CLICK  
MENU  
R-CLICK  
ENTER  
Color:  
(–) Duller  
(+) Brighter  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
Tint:  
(–) Redder  
(+) Greener  
RESET  
Sharpness: (–) Softer  
(+) Sharper  
• To store the adjustments even if the power is  
turned off, follow the procedure of “Saving  
Press MENU to display the  
menu.  
1
2
R-level:  
G-level:  
B-level:  
(–) To reduce red  
(+) To increase red  
data”.  
34  
• Pressing RESET will return all the  
adjustments or settings currently displayed to  
their default.  
(–) To reduce green  
(+) To increase green  
Press or to select  
.
P i c t u r e  
(–) To reduce blue  
(+) To increase blue  
–
+
+
+
C o n t r a s t  
–
B r i g h t n e s s  
–
C o l o r  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
33  
Adjustments  
Notes  
Press MENU to display the  
menu.  
1
2
Sound adjustments  
– Audio  
• These adjustments are stored until you turn  
the power off.  
• To store the adjustments even if the power is  
turned off, follow the procedure of “Saving  
Press or to select  
.
Preparation  
• Display the image as explained in “Picture  
data”.  
34  
Au d i o  
• Pressing RESET will return all the  
adjustments or settings currently displayed to  
their default.  
Projection”.  
• Set the POINTER/PJ selector to “PJ”.  
21  
–
+
+
+
V o l ume  
–
B a s s  
–
T r e b l e  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Press or to select a  
preferred item.  
3
4
Press or to adjust the  
item.  
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
To select another item, go back to step 3.  
2-4  
LASER  
– :  
+ :  
POINTER  
PJ  
1,5  
Volume :  
(–) To turn down.  
(+) To turn up.  
L-CLICK  
MENU  
R-CLICK  
ENTER  
Bass:  
(–) To reduce the bass.  
(+) To increase the bass.  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
Treble:  
(–) To reduce the treble.  
(+) To increase the treble.  
RESET  
Press MENU.  
The menu disappears.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
34  
Adjustments  
Press MENU to display the  
menu.  
1
2
Saving data  
– Save  
Press or to select  
.
Preparation  
• Display the image as explained in “Picture  
Sa v e  
Projection”.  
• Set the POINTER/PJ selector to “PJ”.  
21  
S a v e d a t a  
A l  
l
p r e s e t  
SELECT/ADJUST  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Press or to select a  
preferred item.  
3
Save data : To save the adjustments  
and settings on the menu.  
All preset : To restore the adjustments  
and setings on the menu  
to the factory set.  
AUTO SET  
MARKER  
ON/STANDBY  
KEYSTONE  
2,3  
4
LASER  
POINTER  
PJ  
1,5  
Press ENTER.  
4
5
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
RESIZE RESET FREEZE  
Press MENU.  
The menu disappears.  
RESET  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
35  
Camera  
Camera control panel  
Part names and functions of  
document imaging camera  
OVERLAY button  
To activate the overlaying projection.  
39  
1
2
3
4
5
1
2
3
PHOTO/TEXT button  
To switch modes between text and photo.  
38  
CAUTION  
• When using the camera, be careful to not  
pinch your hand or fingers into the arm.  
• Do not look into the projection lens while  
operating the projector.  
ARM LIGHT button  
To turn on or off the light.  
37  
OVERLAY PHOTO/TEXT ARM LIGHT  
LOCK (W.BALANCE) indicator  
Lights when the white balance is locked.  
38  
LOCK  
W.BALANCE CAMERA  
On the document imaging camera model, you  
can project pictures using the document  
imaging camera.  
W.BALANCE button  
To switch white balance settings between  
38  
The document imaging camera can directly  
project any materials (documents, illustrations,  
etc.) without using an OHP film.  
automatic adjustment and lock.  
4
5
6
CAMERA button  
37  
6
To select the camera source.  
Press again to return to the previous input  
source.  
Camera head  
Focusing ring  
Camera lens  
38  
Arm  
Light  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
36  
Camera  
3) Turn the arm.  
6) Pull up the light.  
(Continued)  
Preparation of the document imaging  
camera  
1) Raise up the arm.  
4) Open the camera head.  
7) Turn the light.  
2) Stretch the arm.  
Notes  
5) Turn the camera head.  
• Never give shocks or impacts to the camera  
or arm as this may cause breakdowns.  
• While raising up the arm in step 2), be careful  
not to hit your face or your body.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
37  
Camera  
Place a document (text,  
illustration) onto or around the  
projector, and turn the camera  
head to direction of the  
document.  
Press CAMERA to select the  
camera input mode.  
Pressing CAMERA on the camera control  
panel or INPUT on the main unit can also  
select it.  
2
3
4
Picture projection with the  
document imaging camera  
Preparation  
Display the image as explained in “Picture  
Projection” .  
21  
“Camera” is displayed.  
Move the camera head to  
adjust the size of the picture.  
LCD PROJECTOR  
LCD PROJECTOR  
OVERLAY PHOTO/TEXT ARM LIGHT  
1
LOCK  
W.BALANCE CAMERA  
Up : To reduce.  
3
6
3
SELECT/ADJUST  
LCD PROJECTOR  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
LAMP  
TEMP  
Down : To enlarge.  
AUTO SET ON/STANDBY  
KEYSTONE  
You can project around the projector by  
moving the arm and the camera head.  
MARKER  
LASER  
POINTER  
PJ  
L-CLICK  
MENU  
R-CLICK  
ENTER  
RGB  
VIDEO CAMERA  
3
RESIZE RESET FREEZE  
Press ARM LIGHT.  
The light turns on.  
1
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
38  
Camera  
Locking the white balance  
Correcting illuminated defects  
(Continued)  
Normally, this camera automatically adjusts the If there are some luminous dots on a projected  
color balance to project the picture. If the  
adjustment is not sufficient, follow the steps  
below to lock the white balance.  
picture, make the following correction.  
Focus on the picture by  
turning the focusing ring on  
the camera head.  
5
1) While the camera is active, cover the  
camera lens with a black paper  
completely.  
1) Project a white paper and enlarge it to  
fill the screen.  
2) Press OVERLAY and ARM LIGHT at the  
same time.  
2) Press W.BALANCE to turn the LOCK  
indicator on.  
Focusing ring  
N: Near  
F: Far  
The white balance is locked.  
To release the white balance, press  
W.BALANCE again to turn the LOCK  
indicator off.  
Press PHOTO/TEXT to select  
the mode of the document.  
6
7
Notes  
• When projecting a transparent draft such as  
an OHP film or a small size document such  
as a name card, etc., place the supplied pad  
under them.  
• When the arm is not raised up, the camera  
source cannot be projected.  
• If you raise up the arm while the camera input  
is selected, the color of the picture may vary  
for an instant due to the white balance  
adjustment. This is not malfunction.  
• If you put back the arm and raise it up while  
the white balance is locked (the LOCK  
indicator is lit), the projector releases the  
white balance but leaves the LOCK indicator  
on. In this case, press W.BALANCE to restore  
the indicator to the normal status.  
• “Camera gain” adjustment may improve view  
of a camera subject which is too dark or vivid.  
32  
PHOTO:  
when using a photograph.  
TEXT:  
when using a text.  
AB  
When finished, turn off the  
light and close it, and put back  
the arm.  
Follow the steps of “Preparation of the  
document imaging camera” in reverse.  
Note  
The light turns off automatically when the arm  
is leaned.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
39  
Camera  
Write on the paper with a blue  
or red pen.  
4
Overlaying projection  
The handwriting is superimposed on the  
RGB picture.  
When an RGB source is projected, you can  
overlap your handwriting on it.  
RGB picture  
Preparation  
• Display an RGB picture.  
• Set the document imaging camera at the  
ready.  
36  
OVERLAY PHOTO/TEXT ARM LIGHT  
2
LOCK  
W.BALANCE CAMERA  
Notes  
• Handwriting in colors except blue and red  
cannot be displayed properly.  
• Handwriting in fine lines may not be displayed  
properly.  
Prepare a white paper to write  
on.  
1
2
Press OVERLAY.  
The camera source is overlaid on the  
RGB picture.  
Project the paper using the  
camera.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
40  
Maintenance  
ON  
Lit (red)  
Lit (red)  
–
ON  
Lit (red)  
Trouble indications  
LAMP  
TEMP  
LAMP  
TEMP  
–
Flashing (red)  
If there is some problem inside the projector,  
the indicators light up or flash.  
The lamp turns off or does not light up.  
The power turns off or does not come on.  
→ The lamp’s end, or malfunction of the  
→ Trouble with the intake fan.  
unit.  
SELECT/ADJUST  
• Unplug the power cord and call the  
dealer.  
ON  
ON/STANDBY  
MENU  
ENTER  
INPUT  
ON Indicator  
LAMP Indicator  
TEMP Indicator  
• Lamp’s life length is over, replace the  
LAMP  
TEMP  
lamp with new one.  
42  
• Unplug the power cord and call the  
dealer.  
ON  
Lit (red)  
LAMP  
TEMP  
–
Flashing (orange)  
ON  
Lit (red)  
–
The power turns off or does not come on.  
LAMP  
TEMP  
Lit (red)  
→ Trouble with the exhaust fan.  
• Unplug the power cord and call the  
dealer.  
The power turns off or does not come on.  
→ The inside is too hot, or the projector has  
been working in an area of high  
temperature.  
Note  
Before attempting any maintenance, unplug the  
power cord.  
• Place the projector correctly so the  
intake and exhaust fans’ holes are not  
covered.  
ON  
Off or lit (red)  
LAMP  
TEMP  
–
–
• Turn the projector off, and leave it for  
a while, and turn it on again.  
The power does not come on.  
• Clean the air filter.  
41  
→ Malfunction of the unit.  
• Unplug the power cord and call the  
dealer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
41  
Maintenance  
3) Clean the air filter cover.  
Cleaning the lens  
Air filter, lens and main unit  
cleaning  
Remove dust and stains with a vacuum  
cleaner.  
Use a blower or a lens cleaner to clean the  
lens.  
Never rub or tap the lens with a hard object as  
the lens surface is fragile.  
CAUTION  
If you use the projector mounted on the  
ceiling, ask the dealer to carry out the  
maintenance such as cleaning.  
Cleaner’s  
nozzle  
Cleaning the main unit  
• Pull out the power cord before cleaning.  
• Use a soft cloth to wipe off stains from the  
surface.  
4) Attach the air filter cover.  
• To remove difficult stains, use a soft cloth  
slightly moistened with a weak solution of  
synthetic detergent and water, and finish with  
a soft, dry cloth.  
Cleaning the air filter  
The filter under the air filter cover is the device  
to shut out dusts or dregs.  
Do not use the projector with the filter taken off.  
Give a frequent clean especially to the air filter.  
(The cleaning period is once per about 50  
hours).  
Replacing the intake, exhaust fans  
and air filter  
To maintain the efficiency of the projector,  
replace the intake and exhaust fans about  
every two to three years.  
1) Unplug the power cord.  
Ask the dealer for the replacement.  
2) Take off the air filter cover.  
The filter is on the right side of the projector.  
Pull up the filter tabs.  
Notes  
• When the air filter is dusty, the ventilation is  
impaired. This causes the temperature inside  
the projector to rise, and may damage the  
unit.  
• Attach the air filter cover firmly after the  
cleaning. If it is not set correctly, the dusts will  
enter and they will be projected and  
overlapped on the picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
42  
Maintenance  
Take off the lamp cover on the  
bottom panel.  
Attach the lamp cover.  
Slide the cover in place and tighten two  
screws.  
3
6
7
Lamp replacement  
Loosen two screws, and pull off the lamp  
cover.  
3
The lamp will eventually begin to project dark  
or dull pictures and finally will not light up.  
(Lamp’s life length depends on the use  
condition.) In such a case, replace the lamp  
with new one.  
1
2
1
2
CAUTION  
• If you use the projector mounted on the  
ceiling, ask the dealer to carry out the  
maintenance such as cleaning or  
replacement of the lamp.  
• When replacing, always use lamp “TLPL6”  
(sold separately). For detail, refer to TLPL6  
instruction.  
• If you have been using the projector, the  
lamp will be very hot, and may cause burn  
injuries. Wait for the lamp to cool (for longer  
than 1 hour) before replacing it.  
Reset the lamp timer.  
Refer to the lamp instructions for  
resetting.  
Pull out the lamp.  
Loosen the two fixing screws, and lift up  
the handle to pull out the lamp.  
4
5
1
Notes  
• The projector displays the total working time  
at every 1,000 hours (only when plugged in  
and turned on; ex. “ >1000H ”, “ >2000H ”).  
• The lamp should be replaced if the total  
working time exceeds about 2,000 hours.  
• Attach the lamp cover firmly after replacing  
the lamp. If it is not set correctly, the power  
will not turn on.  
• Use a new lamp when replacing it.  
• The lamp is made of glass and is very fragile.  
Do not touch the lamp with your bare hands  
and do not jolt or damage it. Do not use an  
exhausted lamp.  
2
Load a new lamp.  
Slide until it hits the bottom and tighten  
the two fixed screws.  
2
Unplug the power cord.  
1
1
Wait until the lamp gets cold  
enough.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
43  
Others  
• The “Brightness” adjustment is at its  
darkest.  
• The picture is out of focus.  
→ Focus the picture.  
• The projection distance is not  
appropriate.  
Before calling service  
personnel  
21  
→
Make the “Brightness” adjustment.  
27  
• The source is not correctly connected to  
the projector.  
Check the following points before asking for  
support service.  
→ Adjust the distance properly.  
• The projecting light is not hitting the  
screen squarely.  
19  
→ Connect the source correctly to the  
Refer also to “Trouble indications”.  
40  
projector.  
16  
→ Adjust the projecting direction so that  
the light hits the screen squarely.  
The power does not come on.  
No sounds are heard.  
19  
• The power cord is disconnected.  
• The “Brightness”, “Contrast”, “Sharpness”  
or “Phase” adjustments are not correct.  
• The wrong input is selected.  
→ Select the input source correctly.  
• The audio muting mode is on.  
→ Firmly plug in the power cord.  
19  
21  
→ Make the “Image” or “Picture”  
• The lamp cover is not attached correctly.  
→ Attach the cover correctly.  
adjustments.  
31 32  
42  
→
Press MUTE to restore the sound.  
23  
• The sound volume is at the minimum.  
The pictures are dim.  
The power turns off while using the  
projector.  
→ Adjust the sound volume on the  
• The “Brightness” or “Contrast”  
adjustments are not correct.  
menu.  
33  
• The ambient temperature of the  
projection room is too high.  
• The source is not correctly connected to  
the projector.  
→ Make the “Picture” adjustments.  
32  
• The lamp life is ending.  
→ Lower the ambient temperature of the  
projection room, and turn the power  
on.  
→ Connect the source correctly to the  
projector.  
→ Replace the lamp.  
42  
16  
The images are blurred. Focusing is  
uneven.  
The colors are faint. The colors are strange.  
No image appears.  
• The “Color”, “Tint”, “R-Level”, “G-Level” or  
“B-Level” adjustments are not correct.  
• The lens cover is on.  
• The lens is dirty.  
→ Take off the lens cover.  
19  
→ Make the “Picture” adjustments.  
→ Clean the lens.  
32  
• The wrong input is selected.  
→ Select the input source correctly.  
• The muting mode is on.  
Use a lens cleaner to clean the lens.  
41  
• The lamp life is ending.  
21  
→ Replace the lamp.  
42  
→
Press MUTE to restore the picture.  
23  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
44  
Others  
(Continued)  
Image does not appear when using the  
document imaging camera.  
The remote control does not work.  
• The wrong input is selected.  
• The remote control is not facing the  
remote sensor.  
→ Select the correct input source.  
37  
→ Face the remote control transmitter  
toward the remote sensor on the  
Image is out of focus or not clear when  
using the document imaging camera.  
projector.  
15  
• The remote control is too far.  
• The camera lens is dirty.  
→ Operate within about 5 meters.  
15  
→ Clean the camera lens.  
• There is an obstruction between the  
remote control and the remote sensor.  
Use a lens cleaner to clean the lens.  
41  
• The document imaging camera is out of  
focus.  
→ Remove the obstacle.  
• The batteries are exhausted.  
→ Focus the document imaging camera.  
→ Replace the batteries.  
14  
38  
• The operating mode of the remote  
control is not set correctly.  
• Focus between main unit and screen is  
not correct.  
→ Set the POINTER/PJ selector  
→ Focus the picture by turning the  
according to the equipment you want  
focusing ring.  
21  
to control.  
13  
• The light is not on.  
The image may not be projected clearly if  
the light is not on.  
→ Turn on the light.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
45  
Others  
Input Signal  
Mode determination and signal system  
: full compatible  
: dot resizing display  
: high resolution serial transfer control  
: simplified display  
Frequency  
Signal  
Resolution (line)  
Synchronizing  
Default  
Remarks  
VIDEO IN  
650/651 450/451  
model model  
Horizontal Vertical  
Horizontal Vertical  
H/V  
Mode  
System  
(kHz)  
(Hz)  
NTSC  
PAL/SECAM  
NTSC/DTV480i  
NTSC  
PAL/SECAM  
Digital broadcasting  
15.734  
15.625  
15.750  
31.500  
47.500  
33.750  
24.830  
31.470  
31.470  
37.861  
37.861  
31.470  
37.861  
37.500  
43.269  
35.000  
35.156  
37.879  
48.077  
46.875  
53.674  
49.724  
35.522  
59.940  
50.000  
60.000  
60.000  
60.000  
60.000  
56.420  
70.090  
70.090  
85.080  
85.080  
59.940  
72.809  
75.000  
85.008  
66.667  
56.250  
60.317  
72.188  
75.000  
85.061  
74.550  
43.479x2  
664  
756  
484  
574  
480  
480  
720  
1080  
400  
350  
400  
350  
400  
480  
480  
480  
480  
480  
600  
600  
600  
600  
600  
624  
768  
N/N  
N/N  
N/N  
N/N  
N/N  
N/N  
N/N  
P/N  
N/P  
P/N  
N/P  
N/N  
N/N  
N/N  
N/N  
– / –  
P/P  
P/P  
P/P  
P/P  
P/P  
– / –  
P/P  
VIDEO IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
720/640  
720/640  
1280  
1920  
640  
DTV480P/VGA60Hz Digital broadcasting  
DTV720P Digital broadcasting  
HDTV/DTV1080i Hi-Vision/Digital broadcasting  
NEC24K  
TEXT70  
TEXT70  
TEXT85  
TEXT85  
VGA60  
PC98 Standard  
VGA-350  
VGA-400  
VGA 85Hz-1  
VGA 85Hz-2  
VGA 60Hz  
VGA 72Hz  
VGA 75Hz  
VGA 85Hz-4  
MAC-13”  
SVGA 56Hz  
SVGA 60Hz  
SVGA 72Hz  
SVGA 75Hz  
SVGA 85Hz  
MAC-16”  
640  
640  
640  
640  
640  
640  
640  
640  
VGA72  
VGA75  
VGA85  
MAC13  
SVGA56  
SVGA60  
SVGA72  
SVGA75  
SVGA85  
MAC16  
XGA43i  
640  
800  
800  
800  
800  
800  
832  
1024  
XGA 43Hz interlace  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
46  
Others  
(Continued)  
: full compatible  
: dot resizing display  
: high resolution serial transfer control  
: simplified display  
Frequency  
Signal  
System  
Resolution (line)  
Synchronizing  
Default  
Remarks  
RGB IN  
650/651 450/451  
model model  
Horizontal Vertical  
Horizontal Vertical  
H/V  
Mode  
(kHz)  
(Hz)  
XGA60  
XGA70  
XGA75  
XGA85  
MAC19  
SXGA75-1  
MAC21  
SXGA60-1  
SXGA85-1  
SXGA43i  
SXGA60-2  
SXGA75-2  
SXGA85-2  
UXGA60  
UXGA65  
UXGA70  
UXGA75  
XGA 60Hz  
XGA 70Hz  
XGA 75Hz  
XGA 85Hz  
MAC-19”  
SXGA 75Hz  
MAC-21”  
SXGA 60Hz  
SXGA 85Hz  
SXGA 43Hz interlace  
SXGA 60Hz  
SXGA 75Hz  
SXGA 85Hz  
UXGA 60Hz  
UXGA 65Hz  
UXGA 70Hz  
UXGA 75Hz  
48.363  
56.476  
60.023  
68.677  
60.197  
67.500  
68.681  
60.000  
85.938  
46.433  
63.981  
79.976  
91.146  
75.000  
81.130  
87.500  
93.750  
60.004  
70.069  
75.029  
84.997  
74.872  
75.000  
75.062  
60.000  
85.002  
43.436x2  
60.020  
75.025  
85.024  
60.000  
65.000  
70.000  
75.000  
1024  
1024  
1024  
1024  
1024  
1152  
1152  
1280  
1280  
1280  
1280  
1280  
1280  
1600  
1600  
1600  
1600  
768  
768  
768  
768  
768  
864  
870  
960  
960  
1024  
1024  
1024  
1024  
1200  
1200  
1200  
1200  
N/N  
N/N  
P/P  
N/N  
N/N  
P/P  
– / –  
P/P  
P/P  
P/P  
P/P  
P/P  
P/P  
P/P  
P/P  
P/P  
P/P  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
RGB IN  
Notes  
• If the mode identification does not define the mode described on the chart above, adjust to the  
projection details.  
• If the mode identification is carried out correctly, a normal display may be not obtained  
depending on the signal frequency.  
• SXGA, UXGA signals can be projected since the projector has simplified compatibility with them.  
(However, letters and lines can be inequal or a part can be missing. Some signals may not be  
projected at all.)  
• Some computers may have output modes which are not compatible with this projector. Check  
the compatibility of the connectors, signal levels, timing, and resolutions.  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
47  
Others  
(Continued)  
Signal assignment  
5
1
10  
15  
6
11  
D-SUB 15 pin shrinking terminal  
Input Signal  
Pin arrangements  
Video signal  
Analog 0.7V(p-p) 75Ω  
Horizontal synchronizing signal  
TTL level (positive/negative  
Pin No.  
1
2
3
4
5
Video input (Red)  
Video input (Green)  
Video input (Blue)  
N.C  
polarity)  
GND  
6
7
8
9
10  
11  
12  
13  
GND (Red)  
GND (Green)  
GND (Blue)  
N.C  
GND  
GND  
N.C  
Horizontal synchronizing/  
composite synchronizing signal  
Vertical synchronizing signal  
N.C  
Vertical synchronizing signal  
TTL level (positive/negative  
polarity)  
Composite synchronizing signal  
TTL level  
14  
15  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
48  
Others  
(Continued)  
RGB signal defaults  
Video Timing (Horizontal)  
Video Timing (Vertical)  
The following signals are factory set as defaults  
in each mode. However, some computers may  
have different timings than those in the chart.  
Make the necessary adjustments if the picture  
has flickers or is blurred.  
G
H
A
B
C
I
Video  
Video  
Hor Sync  
Ver Sync  
J
D
E
K
Timing chart  
A
B
C
D
E
fh  
(kHz)  
fv  
(Hz)  
Clock  
(MHz)  
G
H
I
J
K
Mode  
Resolution  
(Pixels) (Pixels) (Pixels) (Pixels) (Pixels)  
(Lines) (Lines) (Lines) (Lines) (Lines)  
NEC24k  
TEXT70  
TEXT70  
TEXT85  
TEXT85  
VGA60  
VGA72  
VGA75  
VGA85  
MAC13  
SVGA56  
SVGA60  
SVGA72  
SVGA75  
SVGA85  
MAC16  
XGA60  
XGA70  
XGA75  
XGA85  
MAC19  
640 x 400  
640 x 350  
640 x 400  
640 x 350  
640 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
823 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
85  
50  
50  
96  
96  
640  
640  
640  
640  
640  
640  
640  
640  
640  
640  
800  
800  
800  
800  
800  
832  
1024  
1024  
1024  
1024  
1024  
59  
14  
14  
32  
32  
16  
24  
16  
56  
64  
24  
40  
56  
16  
32  
40  
24  
24  
16  
48  
20  
64  
96  
96  
64  
64  
96  
40  
64  
56  
64  
72  
128  
120  
80  
64  
64  
136  
136  
96  
848  
800  
800  
832  
832  
800  
832  
840  
832  
24.83  
31.47  
31.47  
37.86  
37.86  
31.47  
37.86  
37.50  
43.27  
35.00  
35.16  
37.88  
48.08  
46.88  
53.67  
49.72  
56.42  
70.09  
70.09  
85.08  
85.08  
59.94  
72.81  
75.00  
85.01  
66.67  
56.25  
60.32  
72.19  
75.00  
85.06  
74.55  
21.053  
25.175  
25.175  
31.500  
31.500  
25.175  
31.500  
31.500  
36.000  
30.240  
36.000  
40.000  
50.000  
49.500  
56.250  
57.283  
25  
59  
34  
60  
41  
33  
28  
16  
25  
39  
22  
23  
23  
21  
27  
39  
29  
29  
28  
36  
30  
400  
350  
400  
350  
400  
480  
480  
480  
480  
480  
600  
600  
600  
600  
600  
632  
768  
768  
768  
768  
768  
7
38  
13  
32  
1
10  
9
1
1
3
1
1
37  
1
1
1
3
3
1
1
3
8
2
2
3
3
2
3
3
3
3
2
4
6
3
3
3
6
6
3
3
3
440  
449  
449  
445  
445  
525  
520  
500  
509  
525  
625  
628  
666  
625  
631  
667  
806  
806  
800  
808  
804  
48  
128  
120  
80  
96  
128  
88  
864  
1024  
1056  
1040  
1056  
1048  
1152  
1344  
1328  
1312  
1376  
1320  
64  
160  
152  
216  
160  
144  
176  
208  
180  
48.363 60.004 65.000  
56.476 70.069 75.000  
60.023 75.029 78.750  
68.677 84.997 94.500  
60.197 74.872 73.200  
96  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
49  
Others  
Command list  
Adjustments with RS-232C  
Conditioning of the Projection Unit can also be  
done by a computer via the RS-232C, as well  
as by the remote control.  
Classification  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
NORMAL  
RESIZE  
Command  
POF  
PON  
MOF  
MON  
AOF  
AON  
DOF  
DON  
FOF  
FON  
IN1  
Meaning  
Power OFF  
Power ON  
Video audio mute OFF  
Video audio mute ON  
Audio mute OFF  
Audio mute ON  
Status display OFF  
Status display ON  
Freeze OFF  
Freeze ON  
Input (RGB)  
Input (Video)  
Input (Camera)  
Resize reset  
Pin No.  
Signal Meaning  
7
1
2
3
4
5
6
7
8
N.C  
TXD  
RXD  
DSR  
GND  
DTR  
CTS  
RTS  
No connection  
Sending data  
Receiving data  
Data set ready  
Signal ground  
Data terminal ready  
Consent to send  
Request to send  
8
6
5
3
4
2
1
Mini DIN 8-pin  
(Main Unit)  
IN2  
IN3  
RS0  
RS1  
RS2  
RS3  
RS4  
PO0  
PO1  
PO2  
PO3  
PO4  
CW0  
CW1  
CS0  
CS1  
CO0  
CO1  
ARS  
ARG  
RESIZE  
RESIZE  
RESIZE  
RESIZE  
RESIZE  
RESIZE  
RESIZE  
RESIZE  
Resize 1  
Resize 2  
Resize 3  
Resize 4  
Interface format  
1
2
Communication  
method  
RS-232C  
No parity + 8DATA + 1 STOP bit  
Position reset  
Position upper shift  
Position lower shift  
Position left shift  
Position right shift  
Automatic W/B OFF  
Automatic W/B ON  
Text mode OFF  
Text mode ON  
Overlaying mode OFF  
Overlaying mode ON  
Adjustment value reset  
Adjustment value increase  
Data format  
Command shall be composed of  
alphanumeric characters of ASCII  
description. Use only capital letters.  
RESIZE  
3
4
Speed  
9600 bps  
CAMERA  
CAMERA  
CAMERA  
CAMERA  
CAMERA  
CAMERA  
ADJUST  
ADJUST  
Communication  
format  
STX (02h) Command (3Byte) ETX (03h)  
5
Return value  
One command only can be used in one  
communication.  
Acknowledge ACK (06h)  
Not Acknowledge NAK (15h)  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
50  
Others  
(Continued)  
Classification  
ADJUST  
ADJUST  
ADJUST  
KEYSTONE  
KEYSTONE  
Image  
Command  
ALF  
Meaning  
Classification  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Save  
Command  
LGR  
LIT  
LSP  
LP0  
PJ0  
PJ1  
PJ2  
PJ3  
KR0  
KR1  
KV0  
KV1  
KV2  
KV3  
KV4  
KV5  
KV6  
KV7  
KV8  
KV9  
KVA  
MO0  
MO1  
DRS  
DSV  
Meaning  
German display setting  
Italian display setting  
Spanish display setting  
Portuguese display setting  
Floor-mounted front projection  
Floor-mounted rear projection  
Ceiling-mounted front projection  
Ceiling-mounted rear projection  
RGB input mode (RGB)  
Adjustment value decrease  
Adjustment value increase  
Adjustment value decrease  
Keystone automatic adjustment  
Keystone manual adjustment  
Panel automatic adjustment  
Vertical position adjustment  
Horizontal position adjustment  
Phase adjustment  
Clock adjustment  
Brightness adjustment  
Color adjustment  
Contrast adjustment  
Sharp adjustment  
Tint adjustment  
Blue level adjustment  
Green level adjustment  
Red level adjustment  
Camera gain adjustment  
Volume adjustment  
Treble adjustment  
Bass adjustment  
Japanese display setting  
English display setting  
French display setting  
AUP  
ADW  
PKA  
PKS  
PAT  
PVP  
PHP  
PPH  
PCK  
VBR  
VCL  
VCN  
VSH  
VTN  
VLB  
VLG  
VLR  
CGN  
VOL  
VTR  
VBS  
LJP  
Image  
Image  
Image  
Image  
RGB input mode (Y/Pb/Pr)  
Video signal mode (Automatic)  
Picture  
Picture  
Picture  
Picture  
Picture  
Picture  
Picture  
Picture  
Picture  
Audio  
Audio  
Audio  
Default  
Default  
Default  
Video signal mode (60/NTSC/JAPAN)  
Video signal mode (60/NTSC/3.58)  
Video signal mode (60/NTSC/4.43)  
Video signal mode (60/PAL/3.58)  
Video signal mode (60/PAL/4.43)  
Video signal mode (50/NTSC/3.58)  
Video signal mode (50/NTSC/4.43)  
Video signal mode (50/PAL/3.58)  
Video signal mode (50/PAL/4.43)  
Video signal mode (50/SECAM/4.43)  
OSD mute OFF  
OSD mute ON  
Adjustment value preset  
Adjustment value saving  
LEN  
LFR  
Save  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
51  
Others  
VIDEO INPUT  
S-video signal : Mini DIN 4-pin  
Projection lens  
Specifications  
Lens  
Zooming lens F = 1.8 – 2.1  
f = 36 – 47mm  
Video signal : 1V(p-p), 75Ω  
Audio : 1V(p-p), more than 22kΩ,  
RCA pin jack  
Focusing Manual operation  
Zooming Manual operation  
Main unit  
MONITOR OUTPUT  
RGB signal : D-sub 15-pin  
Audio : 1V(p-p), less than 2.2kΩ,  
ø3.5mm stereo mini jack  
Power requirements  
AC 100 – 240V 50/60Hz  
Power consumption  
TLP450E, TXP450 : 220W  
Document imaging camera  
CONTROL terminal  
Mini DIN 8-pin (RS-232C)  
Cabinet Material  
Lens  
Focus  
Iris  
Image element  
1/3 inch CCD  
Total picture elements  
810,000 pixels  
Resolution Horizontal 1024, vertical 768  
Lighting LED light  
F = 1.8 – 2.3, f = 5.8 – 23.2mm  
Manual operation  
Auto/Level adjustment allowed  
TLP451E, TXP451 : 235W  
TLP650E, TXP650 : 220W  
TLP651E, TXP651 : 235W  
ABS resin  
Mass  
TLP450E, TXP450 : 3.7 Kg  
TLP451E, TXP451 : 4.5 Kg  
Liquid crystal display  
TLP650E, TXP650 : 3.7 Kg  
TLP651E, TXP651 : 4.5 Kg  
Projection system  
3-pannels transmission  
Dimensions  
Panel size  
TLP450E, TLP650E, TXP450, TXP650 :  
318 x 87 x 232 (mm) (W/H/D)  
(Including the projecting sections)  
0.9 inches  
Driving system  
TFT active matrix  
Picture elements  
TLP451E, TLP651E, TXP451, TXP651 :  
318 x 87 x 288 (mm) (W/H/D)  
(Including the projecting sections)  
TLP450E, TLP451E, TXP450, TXP451 :  
480,000 pixels (800 x 600 dots) x 3  
Ambient environment  
Temperature : 0°C to 35°C  
Humidity : 30% to 70% RH  
TLP650E, TLP651E, TXP650, TXP651 :  
786,432 pixels (1024 x 768 dots) x 3  
Lamp  
UHP lamp 150W  
Speaker  
1W (monaural)  
RGB INPUT  
RGB signal : (D-sub 15-pin)  
Audio: 1V(p-p), more than 22kΩ,  
ø3.5mm stereo mini jack  
(Continued)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
52  
Others  
(Continued)  
Accessories  
Wireless remote control ............................... 1  
AA size battery ............................................. 2  
Power cord ................................................... 2  
RGB cable ............................................1 (3m)  
Adapter for Macintosh computers ................ 1  
PC audio cable .....................................1 (3m)  
Audio/Video cable ................................1 (3m)  
Lens cover.................................................... 1  
REMOTE MOUSE RECEIVER .................... 1  
IBM/MAC mouse cable  
(for REMOTE MOUSE RECEIVER) ............. 1  
PS/2 mouse adapter  
(for REMOTE MOUSE RECEIVER) ............. 1  
MAC mouse adapter  
(for REMOTE MOUSE RECEIVER) ............. 1  
USB mouse cable  
(for REMOTE MOUSE RECEIVER) ............. 1  
Trademarks  
NEC, PC-98 series are trademarks of NEC  
Corporation.  
Pointing rod .................................................. 1  
Carrying case ............................................... 1  
IBM, DOS/V, VGA, SVGA, XGA, SXGA, UXGA  
are trademarks or registered trademarks of  
International Business Machines Corporation.  
Macintosh is a registered trademark of Apple  
Computer, Inc.  
The design and specifications are subject to  
change without notice.  
Windows is a registered trademark of Microsoft  
Corporations in the U.S. and other countries.  
T O S H IB A C O R P O R A T IO N  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tascam CD Player BB 1000CD User Manual
Tech Craft TV Video Accessories NTR60 User Manual
Tektronix Lawn Mower TM 5003 User Manual
Telex Video Game Headset H 51 User Manual
The Speaker Company Speaker System Home Theater Speaker User Manual
TRENDnet Computer Drive TEW 624UB User Manual
Triarch Indoor Furnishings 25931 User Manual
Triarch Indoor Furnishings 33232 User Manual
Tripp Lite Network Cables S522 01M User Manual
Ultratec Network Card INTELE MODEM User Manual