Toshiba Network Card T1 40 PLC User Manual

Programmable Controllers  
GATEWAY  
Protocol Converters for Toshiba PLCs  
Temperature  
Controllers  
Motor  
Protection  
Relays  
GATEWAY with Toshiba T1-40 PLC  
CAN WE TALK?  
Everyone Always Wants to Know  
What Everyone Else is Doing  
Higher Level Controller  
Adjustable  
Speed Drives  
Computer  
DCS  
PLC  
Don’t Let Anyone Work Alone!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gateway Modes  
There are two communications ports on the Gateway, labeled PLC1 and PLC2. Each port can be  
configured for either RS232 or RS485 operation. Gateway can communicate through either the T-Series  
RS232 programming port or the RS485 computer link port.  
Gateway Setup  
Gateway is setup using simple MS Windows setup software. The software allows devices/registers from  
one device to be mapped to devices/registers of the other device. For Modbus, the 400001 numbered  
holding registers can be mapped directly to D data registers in the Toshiba PLC.  
In the above example, 5 data registers in the T1 PLC starting at D101 are written into PID controller  
modbus registers starting with holding register 400001. 3 Holding registers in the PID controller are  
written into the data registers of the T1 starting at D0 (D0 –D2). It is also possible to control the priority  
and frequency of the data transfer using the Gateway setup software.  
Specifications  
Power Supply:  
24 VDC +/- 5 % (50 ma MAX.) No Fuse inside  
5 VDC +/- 5 % FROM PLC (120 ma MAX.)  
Two ports as follows:  
Communication:  
Com 1: RS232C/RS485  
Com 2: RS232C/RS485  
Status LEDs:  
PLC1 LED  
STATUS LED  
PLC2 LED  
Temperature:  
Humidity:  
Immunity to ESD:  
Immunity to Transients:  
Radiated Susceptibility:  
Emissions:  
Operating: 0 to 60 °C Storage: - 40 to 90 °C  
10% to 90% (Non condensing)  
Level 3 as per IEC1000-4-2  
Level 3 as per IEC1000-4-4  
Level 3 as per IEC1000-4-3  
EN55011 CISPR A  
Dimensions:  
97mm(W) X 15.mm (H) X 42mm(D) DIN RAIL mounting  
available  
Weight:  
100 gm Approx.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
Mounting is via Din Rail or Through Hole  
Order Information  
Part Number  
Description  
GWY-02  
Gateway Protocol Converter, RS232/RS485, Powered from PLC, includes 50cm  
cable for connection to T1 programming port.  
GWY-08  
Gateway Protocol Converter, RS485/RS485, Requires 24 Vdc Power.  
RS232 to RS422/RS485 Converter, 2 wire / 4 wire.  
Y Cable, Connects Gateway to T1 and PC for downloading Gateway Program.  
Y Cable, Connects Gateway to T2 and PC for downloading Gateway Program.  
Cable, Connects Gateway to T1 programming port, 2m.  
CNV-01-02-2-0  
SC-Y-019A-00  
SC-Y-019A-00  
SC-G-019A-00  
SC-G-019B-00  
Cable, Connects Gateway to T2 programming port, 2m.  
ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC DCS  
Available Through:  
INTERNATIONAL CORPORATION  
13131 West Little York Rd Houston, TX 77041  
Ph: 713-466-0277  
Fax: 713-466-8773  
US: 800-231-1412 Canada: 800-872-2192 Mexico: 001-800-527-1204  
Rev 2003.5.1  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tech Craft TV Video Accessories BG4020 User Manual
Technicolor Thomson DVD Player DTH190 User Manual
Telex Speaker System ZX3 User Manual
Toastmaster Bread Maker 1142 User Manual
Turbo Chef Technologies Convection Oven TD030208 User Manual
Uniflame Gas Grill GBC920W1 User Manual
Victory Refrigeration Refrigerator VPT 119 NS User Manual
ViewSonic Computer Monitor VX2439WMH User Manual
Viking Convection Oven VHSO205 User Manual
Weed Eater Blower 545146904 User Manual