Toshiba Home Theater System SD V57HTSU User Manual

TH-C550M.NA1UTT_RH0074C_ENG

DVD/VCR

Home Theater System

SD-V57HTSU

OWNER’S MANUAL

Before connecting, operating or adjusting this product,

please read this instruction booklet carefully and completely.

This device does not tape-record copy protected DVD Video Discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions. - All these safety and oper-

ating instructions should be read before the product is

operated.

11. Only use attachments/accessories specified by

the manufacturer.

2. Keep these instructions. - The safety, operating and

use instructions should be retained for future refer-

ence.

3. Heed all warnings. - All warnings on the product and

in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use

instructions should be followed.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

apparatus. When a cart is used, use caution

when moving the cart/product combination to

avoid injury from tip-over.

5. Do not use this product near water. – For example:

near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement; or near a swimming pool; and

other areas located near water.

13. Unplug this product during lightning storms or

when unused for long periods of time.

6. Clean only with dry cloth. – Unplug this product from

the wall outlet before cleaning. Do not use liquid

cleaners.

14. Refer all servicing to qualified service personnel.

Servicing is required when the product has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the product, the product

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over-heating. The

openings should never be blocked by placing the

product on a bed, sofa, rug or other similar surface.

This product should not be placed in a built-in instal-

lation such as a bookcase or rack unless proper ven-

tilation is provided or the manufacturer’s instructions

have been adhered to.

8. Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A ground-

ing type plug has two blades and a third ground-

ing prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

ꢀ

Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Still Picture and Frame-by-Frame Playback . . . 30

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3D Surround . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Marker Search . . . . . . . . . . . . . . . . . . . . . . . . . 32

Changing Video Mode . . . . . . . . . . . . . . . . . . . 32

Introduction

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 3

Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Selecting the Viewing Source. . . . . . . . . . . . . . . . . . 6

Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Special DVD Features . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ

Checking the contents of

DVD Video discs: Menus . . . . . . . . . . . . . . . . . 32

ꢀ

Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ

Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Preparation

ꢀ

Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

Connecting Antenna/Cable TV to a

ꢀ

Changing the Audio Language . . . . . . . . . . . . . 32

ꢀ

Changing the Audio Channel . . . . . . . . . . . . . . 32

DVD/VCR Receiver . . . . . . . . . . . . . . . . . . . . . . . . 11

Basic TV Connections . . . . . . . . . . . . . . . . . . . . . . 12

Optional TV Connections . . . . . . . . . . . . . . . . . . . . 12

Speaker System Connections. . . . . . . . . . . . . . . . . 13

Speaker Positioning . . . . . . . . . . . . . . . . . . . . . . . . 13

Radio Antenna Connections . . . . . . . . . . . . . . . . . . 14

Accessory Audio/Video (A/V) Connections to

ꢀ

Subtitle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ꢀ

Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Audio CD and MP3/WMA Disc Operation. . . . . . . 33-34

Playing an Audio CD and MP3/WMA Discs. . . . . . . 33

Notes on MP3 Recordings . . . . . . . . . . . . . . . . . . . 33

ꢀ

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ

Moving to another Tracks . . . . . . . . . . . . . . . . . 34

DVD/VCR Receiver . . . . . . . . . . . . . . . . . . . . . . . . 14

Digital Device Connections. . . . . . . . . . . . . . . . . . . 14

Selecting the Input/Output Source . . . . . . . . . . . . . . 15

Before Operation - Sound Mode Descriptions . . . . . 16

Mini Glossary for Audio Stream & Surround Mode . 16

Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

VCR Operation Setup . . . . . . . . . . . . . . . . . . . . . . 17-19

On-Screen Display(OSD) . . . . . . . . . . . . . . . . . . . . 17

On-Screen Menus Setup . . . . . . . . . . . . . . . . . . . . 17

VCR Setup Menu Options . . . . . . . . . . . . . . . . . . . 18

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 19

DVD Operation Setup . . . . . . . . . . . . . . . . . . . . . . 20-23

General Explanation. . . . . . . . . . . . . . . . . . . . . . . . 20

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . 20

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23

ꢀ

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ

Random. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ

Repeat Track/ All/ Off . . . . . . . . . . . . . . . . . . . . 34

ꢀ

Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ

3D Surround . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ꢀ

Changing the Audio Channel . . . . . . . . . . . . . . 34

JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . . . 35

Viewing JPEG Files on a Disc . . . . . . . . . . . . . . . . 35

ꢀ

Selecting other Files. . . . . . . . . . . . . . . . . . . . . 35

ꢀ

Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ

To flip the picture . . . . . . . . . . . . . . . . . . . . . . . 35

ꢀ

To rotate picture . . . . . . . . . . . . . . . . . . . . . . . . 35

Notes on JPEG Files . . . . . . . . . . . . . . . . . . . . . . . 35

Programmed Playback. . . . . . . . . . . . . . . . . . . . . . . . 36

Programmed Playback with Audio CDs

and MP3/WMA Discs . . . . . . . . . . . . . . . . . . . . . . . 36

Programmed Playback with Video CD . . . . . . . . . . 36

ꢀ

Repeat Programmed Tracks. . . . . . . . . . . . . . . 36

ꢀ

General Operation . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ

Erasing a Track from Program List . . . . . . . . . . 36

ꢀ

Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ

Erasing the whole Program List . . . . . . . . . . . . 36

ꢀ

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39

Presetting the Radio Stations . . . . . . . . . . . . . . . . . 38

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . 38

To Clear the Stored Radio Stations. . . . . . . . . . . . . 38

Tuning into a Station Manually . . . . . . . . . . . . . . . . 39

For your reference . . . . . . . . . . . . . . . . . . . . . . . . . 39

Tuning into a Station Automatically. . . . . . . . . . . . . 39

Labeling Stations . . . . . . . . . . . . . . . . . . . . . . . . . . 39

ꢀ

Progressive Scan. . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ

Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . 22

ꢀ

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ꢀ

Parental Control . . . . . . . . . . . . . . . . . . . . . . . . 23

Operation

VCR Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-29

Normal Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Special Effect Playbacks . . . . . . . . . . . . . . . . . . . . 24

ꢀ

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Reference

ꢀ

Still Picture and Frame-by-Frame Playback . . . 24

Controlling Your TV with the Supplied Remote . 40-41

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43

Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . 44

Area Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47

Limited United States Warranty. . . . . . . . . . . . . . . . . 48

ꢀ

Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Variable playback speed control . . . . . . . . . . . . 24

ꢀ

Normal Recording . . . . . . . . . . . . . . . . . . . . . . . . . 25

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . 25-26

Instant Timer Recording . . . . . . . . . . . . . . . . . . . . . 27

Dubbing and Editing. . . . . . . . . . . . . . . . . . . . . . . . 27

Copying from DVD to VCR. . . . . . . . . . . . . . . . . . . 27

VHS Hi-Fi Stereo System/MTS Broadcast . . . . . . . 28

Tape Counter Memory Feature. . . . . . . . . . . . . . . . 29

Additional Information. . . . . . . . . . . . . . . . . . . . . . . 29

DVD and Video CD Operation. . . . . . . . . . . . . . . . 30-32

Playing DVD and Video CD . . . . . . . . . . . . . . . . . . 30

General Features . . . . . . . . . . . . . . . . . . . . . . . 30-32

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Note: Indicates special operating features of this unit.

ꢀ

Moving to another TITLE . . . . . . . . . . . . . . . . . 30

Moving to another CHAPTER/TRACK . . . . . . . 30

Tip:

Indicates tips and hints for making the task easier.

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Note on DTS-encoded CDs

Playable Discs

When playing DTS-encoded CDs, excessive noise may

be exhibited from the analog stereo output. To avoid

possible damage to the audio system, turn down the

volume before playing back such discs, adjust the vol-

ume gradually, and keep the volume level low. To enjoy

DTS Digital Surround^®playback, an external 5.1 chan-

nel DTS Digital Surround^®decoder system must be con-

nected to the digital output of the unit.

DVD

(8 cm/12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Audio CD

(8 cm/12 cm disc)

Disc-related Terms

In addition, this unit can play a DVD-R/ RW, SVCD and

CD-R or CD-RW that contains audio titles, MP3, WMA

or JPEG files.

Title (DVD only)

The main film content or accompanying feature content

or additional feature content, or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

Notes

^ꢀDepending on the conditions of the recording equip-

ment or the CD-R/RW (or DVD-R/ RW) disc itself,

some CD-R/RW (or DVD-R/ RW) discs cannot be

played on the unit.

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number,

enabling you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

^ꢀDo not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

^ꢀDo not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). It may result in malfunctions.

Track (Video CD and Audio CD only)

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

Notes on DVDs and Video CDs

Because of problems and errors that can occur during

the creation of DVD and Video CD software and/or the

manufacture of DVD and Video CD discs, Toshiba can-

not guarantee that this DVD/VCR Receiver will play

every feature of every DVD bearing the DVD logo

and/or every Video CD bearing the CD logo. As one of

the creators of DVD technology, Toshiba DVD players

are manufactured using the highest standards of quality,

and as a result, such incompatibilities are rare. If you

happen to experience any difficulty playing a DVD or a

Video CD on this DVD/VCR Receiver, please feel free

to call our Consumer Solution Center (see page 49).

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

A scene is composed of one or several tracks.

Types of Video CDs

There are two types of Video CDs:

Notes on copyright

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

The unauthorized recording, use, distribution, or revi-

sion of television programs, videotapes, DVDs and

other materials, is prohibited under the Copyright Laws

of the United States and other countries, and may sub-

ject you to civil and/or criminal liability.

This product incorporates copyright protection technolo-

gy that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by

Macrovision Corporation and other rights owners. Use

of this copyright protection technology must be author-

ized by Macrovision Corporation, and is intended for

home and other limited viewing uses only unless other-

wise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

Regional code of the DVD/VCR Receiver and DVDs

This DVD/VCR Receiver is designed and man-

ufactured for playback of region “1” encoded

DVD software. The region code on the labels of

some DVDs indicates which type of player can

play those discs. This unit can only play DVDs labelled

“1” or “ALL”. If you try to play any other discs, the mes-

sage “Check Regional Code” will appear on the TV

screen. Some DVDs that have no region code label

may still be subject to area restrictions and therefore

not playable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Cleaning discs

Precautions

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

To keep the surface clean

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

Cleaning the unit

About Symbols

To clean the cabinet

About the

symbol display

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

“

” may appear on the TV screen during operation.

This icon means the function explained in this owner’s

manual is not available at that moment or with that spe-

cific DVD video disc.

To obtain a clear picture

About the disc symbols for instructions

The DVD/VCR Receiver is a high-tech, precision

device. If the optical pick-up lens and disc drive parts

are dirty or worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

DVD DVDs.

Audio CDs.

For details, please contact your nearest dealer.

VCD2.0

Video CDs with the PBC (playback control)

function.

Moisture Condensation

VCD1.1

Video CDs without the PBC (playback control)

function.

Never operate the DVD/VCR Receiver immediately after

moving it from a cold location to a warm location. Leave

it for two or three hours without operating it. If you use

the DVD/VCR Receiver in such a situation, it may dam-

age discs/tapes and internal parts.

MP3 MP3 Discs.

WMA Discs.

JPEG Files.

WMA

JPEG

Notes on Discs

Selecting the Viewing Source

You must select one of your output sources (DVD or

Handling discs

VCR) to view on the TV screen.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

• If you want to view DVD deck output source:

Press DVD/CD until DVD indicator in the display window lights

and output source of DVD deck is viewed on the TV screen.

• If you want to view VCR deck output source:

Press VCR until VCR indicator in the display window lights and

output source of VCR deck is viewed on the TV screen.

• If you want to listen to AM/FM radio broadcasts:

Press FM/AM until RADIO indicator in the display window lights

and the frequency band appears on the TV screen.

Do not stick paper or tape on the disc.

Notes

• If you insert a disc while the DVD/VCR Receiver is in

the VCR mode, the DVD/VCR Receiver will switch to

DVD mode automatically.

• If you insert a cassette tape without an erasure pre-

vention tab intact while the DVD/VCR Receiver is in

the DVD mode, the DVD/VCR Receiver will switch to

VCR mode automatically.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Download from Www.Somanuals.com. All Manuals Search And Download.

0Front Panel

EJECT

ON/STANBY I/1

Switches the DVD/VCR Receiver ON and OFF.

Ejects the tape in the VCR deck.

VOLUME

Adjusts volume of speakers.

LINE IN 2 (VIDEO / AUDIO (L/R) input

Connect the audio/video output of an

external source (Audio system, TV/ Monitor,

another VCR).

N (PLAY)

To play back a recorded

tape or disc.

Disc Tray (DVD deck)

Insert a disc here.

TUNING (

)

Selects FM and AM band.

COPY/MEMORY

Press to copy a DVD in the DVD deck to a VHS tape

in the VCR deck.

Memorizes currently tuned Radio frequency (station).

OPEN/CLOSE

Opens or closes the disc tray.

Cassette Compartment (VCR deck)

Insert a video cassette here.

DVD/VCR

Toggles control between

the DVD deck and the

VCR deck.

RADIO

Selects Radio operation

mode.

zREC

CH/PRESET (

)

To record normally or to activate

Scans up or down through

memorized channels or radio

frequencies (stations).

Instant Timer Recording.

X (PAUSE/STEP)

Pause playback or recording

temporarily/press repeatedly for

frame-by-frame playback.

Remote Sensor

Point the DVD/VCR Receiver remote

control here.

Display window

Shows the current status of the

DVD/VCR Receiver.

x (STOP)

Stops playback of a disc or tape.

./m

DVD: Go to beginning of current chapter/track or Press two times in quick successions to go

to previous chapter/track. Press and hold for a fast reverse search.

VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.

M/>

DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.

VCR: Advances the tape during the STOP mode or for fast forward picture search.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Window

Indicates encoding format of the current disc.

A cassette is in the VCR deck.

RADIO Indicates RADIO mode is active

MUTE The speaker sound is muted.

Indicates sound mode is

DOLBY PRO LOGIC or DOLBY PRO LOGIC II.

SAP Indicates when a SAP BILINGUAL

broadcast is being received.

HI-FI Indicates the unit is playing

back a tape recorded in Hi-Fi.

REC DVD/VCR Receiver is Recording.

COPY DVD to VCR copy

is in progress.

TIMER DVD/VCR

Receiver is in timer

recording or a timer

recording is programmed.

Lights when a disc

is in the DVD deck

PROG Indicates

when programmed

playback is in

progress.

Indicates clock, total playing time, elapsed time, remaining time, title

number, chapter/track number, channel, radio frequency, level, volume,

channel or current deck status (Playback, Pause, Mode, etc).

Lights when TV mode is active.

The VCR deck is selected.

Indicates repeat mode

DVD DVD inserted.

PHOTO Photo disc inserted.

VCD Video CD inserted.

MP3 MP3 disc inserted.

ST Indicates a stereo broadcast is being received.

Indicates when the Progressive scan playback is in progress.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

TV POWER

Switches TV ON and OFF.

POWER

(

)

I/1

Switches DVD/VCR Receiver ON and OFF.

INPUT ^ꢀ

- Selects the VCR deck’s source

^ꢀTV

To control multi-brand TV.

(Tuner, LINE 1, or LINE 2) in VCR mode.

- Selects the TV external source in TV mode.

^ꢀDVD/CD

To control DVD/CD operating.

AUX ^ꢀ

To listen to an audio source connected to the

DIGITAL AUDIO IN (OPTICAL) jack with

video from LINE 1.

^ꢀVCR

To control VCR operating.

^ꢀFM/AM

Selects the DVD/VCR Receiver’s tuner as

the listening choice (FM and AM bands).

SOUND MODE ^ꢀ

Selects sound mode between BYPASS, PRO

LOGIC, PRO LOGIC II (MOVIE, MUSIC,

MATRIX) and 3D SURROUND.

PROGRAM

Accesses or removes Program menu.

COUNT RESET, CLEAR

- Resets tape counter to 0:00:00

- Removes a track number on the

program menu or a mark on the

MARKER SEARCH menu.

OPEN/CLOSE, EJECT

(

)

ꢀ

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

0-9 numerical buttons

Selects numbered options in a menu.

TOP MENU

Displays the disc’s Title menu, if available.

ZOOM

Enlarges DVD/VCD video image.

DISC MENU

Accesses menu on a DVD disc.

ANGLE ^ꢀ

Selects a DVD camera angle if

available.

RETURN

- Removes the setup menu.

- Displays the menu of a video CD with

PBC.

SUBTITLE ^ꢀ

Selects a subtitle language.

AUDIO ^ꢀ

Selects an audio language (DVD) or an audio

channel (CD).

TUNING (v/V)

To tune in the desired station.

MARKER

Marks any point during playback.

SLOW ^ꢀ

Forward slow playback of tape.

Displays MARKER SEARCH menu.

STOP ^ꢀ

Stops playback.

VOLUME (v

/V)

PAUSE/STEP ^ꢀ

Pause playback or recording

temporarily/press repeatedly for

frame-by-frame playback.

Adjusts volume of speaker.

-Adjusts volume of TV in TV mode.

DISPLAY, CLK/CNT

Accesses On-Screen display.

Switches among the clock, tape counter and

tape remaining modes on the display.

PLAY ^ꢀ

Starts playback.

REW ^ꢀ

- For fast reverse picture search.

- Rewinds the tape during the STOP mode.

b/B/v/V (left/right/up/down)

- Selects an option in the menu.

- CH/TRK (v/V): Selects VCR channels in

VCR mode ; Selects TV channels in TV

mode.

- Manually adjusts the tape’s picture

onscreen in VCR mode.

- b/B can also change the speed of VCR

playback. For example, slow, still, 2x play,

3x play, review and cue.

FWD ^ꢀ

- For fast forward picture search.

- Advances the tape during the STOP mode.

SKIP

(

)

ꢀ

- Skip to beginning of current DVD/CD chap-

ter or track, press twice in quick succession

to go to previous DVD/CD chapter or track.

- Press and hold for a fast reverse picture

search in DVD mode.

TV/VCR

To view channels selected by the VCR tuner

or by the TV tuner.

SKIP

(

)

ꢀ

- Skip to next DVD/CD chapter or track.

- Press and hold for a fast forward picture

search in DVD mode.

ENTER, MEMORY

- Acknowledges menu selection.

- Displays functions on the TV screen.

Note

REC/ITR (z)

ꢀ

SETUP, MENU

Records normally or activates Instant Timer

Recording.

This remote control uses the

same buttons for VCR and

DVD functions (ex. PLAY).

To use the VCR, first press

the VCR button.

Accesses or removes DVD Setup menu and

VCR menu.

REPEAT A-B, SP/SLP ^ꢀ

- Repeats sequence.

- Selects recording speed.

MUTE

Turns off sound from speaker connectors.

REPEAT ^ꢀ

Repeat chapter, track, title, all.

To use the DVD, first press

the DVD/CD button.

RANDOM ^ꢀ

Plays tracks in random order.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

VCR IN LINE 1 (VIDEO IN/AUDIO IN

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

(Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/Monitor, Another

VCR).

Connect to a TV with video and audio inputs.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT

(Y Pb Pr) (DVD OUT)

Connect to a TV with Y Pb Pr inputs. FOR DVD

VIEWING ONLY.

AC Power Cord

Plug into the power source.

ANT.IN

Connect the VHF/UHF/CATV

antenna to this terminal.

RF.OUT

Connect to a TV with RF coaxial inputs.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.

SPEAKER Connectors

Connect the six supplied speakers to these terminals.

DIGITAL AUDIO IN (OPTICAL)

Connect to a digital audio output on a digital device.

AM Antenna Connectors

Connect the AM antenna to this terminal.

Do not touch the inner pins of the jacks on the rear

panel.

FM Antenna Connectors

Connect the FM antenna to this terminal.

Electrostatic discharge may cause permanent dam-

age to the unit.

Caution

Never throw batteries into a fire.

Remote Control Operation Range

Point the remote control at the remote sensor and

press the buttons.

^ꢀDistance: About 7m (23ft) from the front of the

remote sensor

^ꢀAngle: About 30° in each direction of the front of the

remote sensor

Notes

ꢀ Be sure to use AAA size batteries.

ꢀ Dispose of batteries in a designated disposal area.

ꢀ Batteries should always be disposed of with the environment

in mind. Always dispose of batteries in accordance with

applicable laws and regulations.

ꢀ If the remote control does not operate correctly, or if the

operating range becomes reduced, replace batteries with

new ones.

ꢀ When necessary to replace batteries in the remote control,

always replace both batteries with new ones. Never mix bat-

tery types or use new and used batteries in combination.

ꢀ Always remove batteries from remote control if they are dead

or if the remote control is not to be used for an extended

period of time. This will prevent battery acid from leaking into

the battery compartment.

Remote control battery installation

Detach the battery cover on the rear of

the remote control, and insert two R03

(size AAA) batteries with

aligned correctly.

and

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Tips

Without Cable Box

If your cable wire is connected to your TV without a converter

or descrambler box, unscrew the wire from your TV and attach

it to the ANT.IN jack on the DVD/VCR Receiver. Use the sup-

plied round coaxial cable to connect between the DVD/VCR

Receiver’s RF.OUT jack and the 75 ohm antenna input jack on

the TV. With this connection, you can receive all midband,

super band, and hyperband channels.

ꢀ

Depending on your TV and other equipment you wish to

connect, there are various ways you could connect the

DVD/VCR Receiver. Use connections described on pages

11-14.

ꢀ

Please refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the best

connections.

With Cable Box

If a converter is required in your cable system, follow the

instruction below:

The cable hookup permits both TV and DVD/VCR Receiver

operation.

To view or record a CATV channel

Caution

ꢀ

Make sure the DVD/VCR Receiver is connected directly to

the TV. Tune the TV to the correct video input channel.

Do not connect the DVD/VCR Receiver’s DVD/VCR AUDIO

OUT jack to the phono in jack (record deck) of your audio

system.

ꢀ

Do not connect your DVD/VCR Receiver via your VCR. The

DVD image could be distorted by the copy protection sys-

tem.

The unauthorized recording, use, distribution, or revision of

television programs, videotapes, DVDs and other materials,

is prohibited under the Copyright Laws of the United States

and other countries, and may subject you to civil and/or

criminal liability.

1 Tune the TV to the DVD/VCR Receiver output channel (CH

3 or 4).

2 Set the DVD/VCR Receiver channel selector to the output

channel of the Cable Converter box using CH/TRK (v/V) or

number (0-9) of your DVD/VCR Receiver. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

Notes

ꢀ With this connection, you CANNOT record one program

while viewing another.

Connecting Antenna/Cable TV to

DVD/VCR Receiver

ꢀ If you are using a cable box to tune channels, it is not nec-

essary to do Auto Channel Programming, (Auto Channel

Search) as indicated on page 18.

1. Disconnect the antenna leads from the rear of the

TV.

Cable TV

Wall Jack

2. Identify the type of cable from your antenna. If it is a

round cable as illustrated, it is a 75 ohm coaxial

antenna cable. This cable will connect directly to the

jack marked ANT.IN on your DVD/VCR Receiver.

Back Panel of

Typical Cable Box

Tip

If your antenna lead wire is a flat type antenna cable,

connect it to an Antenna Adaptor (300-ohm to 75-ohm)

(not supplied) and slip the Adaptor onto the ANT.IN

jack. The Adaptor does not screw on to the DVD/VCR

Receiver, it just slips over the jack.

Antenna

Cable TV

Wall Jack

Flat Wire

(300 ohm)

Rear of DVD/VCR Receiver

300/75 ohm

Adaptor

(Not supplied)

Rear of DVD/VCR Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Basic TV Connections

Optional TV Connections

Note

Make one of the following connections, depending on

the capabilities of your TV.

DVD playback can also be done using the S-VIDEO OUT

and COMPONENT/PROGRESSIVE SCAN VIDEO OUT

connection options below. The tuner and VCR ONLY

output through the RF.OUT (R) or DVD/VCR OUT (A,

V) jack. (See left)

RF coaxial connection

Connect the RF.OUT jack on the DVD/VCR Receiver to

the antenna in jack on the TV using the 75-ohm Coaxial

Cable supplied (R).

Note

S-Video Connection

If you use this connection, tune the TV to the

DVD/VCR Receiver’s RF output channel (CH 3 or 4).

1. Connect the S-VIDEO OUT jack on the DVD/VCR

Receiver to the S-Video in jack on the TV using the

S-Video cable (S).

How to set the DVD/VCR Receiver’s RF output chan-

nel

When the DVD/VCR Receiver is turned off, press and

2. Connect the Left and Right AUDIO OUT jacks on

the DVD/VCR Receiver to the audio left/right in

jacks on the TV using the supplied audio cables (A).

hold CH/PRESET (

) on the front panel for about

five seconds to change the RF output channel (CH 03

or CH 04). “RF-03” or “RF-04” appears in the display

window.

Component Video (ColorStream^®) connection

1. Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD/VCR Receiver to the

corresponding in jacks on the TV using Y Pb Pr

cables (C).

Audio/Video connection

1. Connect the DVD/VCR VIDEO OUT jack on the

DVD/VCR Receiver to the video in jack on the TV

using the supplied video cable (V).

2. Connect the Left and Right AUDIO OUT jacks of the

DVD/VCR Receiver to the audio left/right in jacks on

the TV (A) using the supplied audio cables.

2. Connect the Left and Right DVD/VCR AUDIO OUT

jacks on the DVD/VCR Receiver to the audio

left/right in jacks on the TV (A) using the supplied

audio cables.

Progressive Scan (ColorStreamPro^®) connection

^ꢀIf your television is a high-definition or “digital ready”

television, you may take advantage of the DVD/VCR

Receiver’s progressive scan output for the highest

video resolution.

Note

If you use this connection, set the TV’s source selector

to VIDEO.

^ꢀIf your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

Progressive Scan on the DVD/VCR Receiver.

Rear of TV

ANTENNA

INPUT

COMPONENT/PROGRESSIVE

SCAN VIDEO INPUT

S-VIDEO

INPUT

VIDEO

INPUT

AUDIO INPUT

1. Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD/VCR Receiver to the

corresponding in jacks on the TV using Y Pb Pr

cable (C).

2. Connect the Left and Right AUDIO OUT jacks of the

DVD/VCR Receiver to the audio left/right in jacks on

the TV (A) using the supplied audio cables.

Notes

^ꢀSet the Progressive Scan to “On” on the DVD setup

menu for progressive signal, see page 21.

^ꢀProgressive scan does not work with the analog video

connections (yellow VIDEO OUT and S-VIDEO OUT

jack).

Rear of DVD/VCR Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Speaker System Connections

Speaker Positioning

For a normal setup use 6 speakers (2 front speakers,

Connect the speakers using the supplied speaker cords

by matching the colors of the terminals and those of the

cords. To obtain the best possible surround sound,

adjust the speaker parameters (distance, level, etc.).

center speaker, 2 rear speakers and subwoofer).

• Front Speakers

Based on your listening position, set up the speakers

at equal distance. And by hearing position, set up an

interval between speakers of 45 degree.

Notes

ꢀ Be sure to match the speaker cord to the appropriate

terminal on the components: 3 to 3 and # to #. If

the cords are reversed, the sound will be distorted

and lack bass.

ꢀ If you use front speakers with low maximum input rat-

ing, adjust the volume carefully to avoid excessive

volume output to the speakers.

• Center Speaker

It is ideal that the center speakers and front speakers

are same height. But normally place it above or below

the television as shown below.

• Rear Speakers

Place the rear surround speakers to the left and right

behind the primary listening area. These speakers

recreate sound motion and atmosphere required for

surround playback. For best results, do not install the

rear speakers too far behind the listening position,

install them at or above the level of the listener’s ears.

It is also effective to direct the rear speakers towards

a wall or ceiling to further disperse the sound.

In the case of a smaller room size, if the audience is

near to the rear wall set the rear speakers opposite

each other, and set the rear speakers 60 - 90 cm

above the listener’s ears.

ꢀ

Do not disassemble the front covers of supplied speakers.

Front Speaker

(Right)

Front Speaker

(Left)

Center

Speaker

• Subwoofer

This can be placed in any front position.

Center Speaker

Subwoofer

Front

Speaker

(Left)

Speaker

(Right)

Rear

Speaker

(Left)

Speaker

(Right)

Rear speaker

(Right surround)

Rear speaker

(Left surround)

Speaker Positioning Example

Subwoofer

About Ferrite Core

Be sure to attach the ferrite core to

the speaker cables (for connecting to

this unit).

This ferrite core can reduce noises.

How to attach the ferrite core.

1 Push the stopper [a] of the ferrite core

to open.

Wind the Center and Subwoofer Speaker

cables once on the ferrite core.

Pass the others straight on the ferrite core.

Close the ferrite core until it clicks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Radio Antenna Connections

Connect the supplied FM/AM antennas for radio listen-

Digital Device Connections

Connect the DIGITAL AUDIO IN (OPTICAL) jacks on

the DVD/VCR Receiver to the digital audio out (optical)

jacks on your digital device (Game device, Digital Set

Top Box, etc.), using optional optical audio cable.

To select source of DVD/VCR Receiver to OPTICAL IN,

press AUX on the remote control.

ing.

1. Connect the AM loop antenna to the AM antenna

connectors.

2. Connect the FM wire antenna to the FM antenna

connectors.

Notes

ꢀ If the audio format of the digital output does not

match the capabilities of your DVD/VCR Receiver, the

DVD/VCR Receiver will produce a strong, distorted

sound or no sound at all.

Notes

ꢀ To prevent noise pickup, keep the AM loop antenna

away from the DVD/VCR Receiver and other compo-

nents.

ꢀ The Optical input function is available only when the

other unit’s Sampling Frequency is 32 - 48kHz.

ꢀ Be sure to fully extend the FM wire antenna.

ꢀ After connecting the FM wire antenna, keep it as hori-

zontal as possible.

Game Device

Digital Set Top Box

AM loop antenna (supplied)

Rear of DVD/VCR Receiver

Accessory Audio/Video (A/V)

Connections to DVD/VCR

Receiver

Rear of DVD/VCR Receiver

Connect the VCR IN LINE1 or LINE in 2 jacks on the

DVD/VCR Receiver to the audio/video out jacks on your

accessory component, using optional audio/video

cables.

AUDIO

OUTPUT

VIDEO

OUTPUT

Front of DVD/VCR Receiver

Rear of DVD/VCR Receiver

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Input/Output Source

Follow these guidelines to select and switch among the

various DVD/VCR Receiver input and output sources:

AUX

DVD/CD

VCR

FM/AM

• DVD/CD

To view output from the DVD deck:

Press DVD/CD on the remote or DVD/VCR on the

front panel until the DVD indicator on the front panel

lights and output from the DVD deck is viewed on the

TV screen.

• VCR

To view output from the VCR deck:

INPUT

Press VCR on the remote or DVD/VCR on the front

panel until the VCR indicator on the front panel lights

and output from the VCR deck is viewed on the TV

screen.

• FM/AM

To listen to AM/FM radio broadcasts:

Press FM/AM on the remote to toggle between AM

and FM radio. The selected frequency appears on

the front panel display.

• AUX

To listen to an audio source connected to the

DIGITAL AUDIO IN (OPTICAL) jack with video

from LINE 1:

Press AUX on the remote control once. L1 OPT will

appear on the front panel display. Audio will come

from an external source connected to the DIGITAL

AUDIO IN (OPTICAL) jack and video will come from

an external source connected to the VIDEO IN jack

of LINE 1 (for rear panel).

To listen to an audio source connected to the

AUDIO IN jack of LINE1 with video from LINE 1:

Press AUX on the remote control a second time.

L1 will appear on the front panel display. Audio will

come from an external source connected to the

AUDIO IN jacks of LINE1 (for rear panel) and video

will come from an external source connected to the

VIDEO IN jack of LINE 1 (for rear panel).

• INPUT

To view a source connected to the front or rear

LINE inputs:

First, press VCR to select the VCR deck, and then

press INPUT to select LINE1 (L1) (for rear panel) or

LINE2 (L2) (for front panel).

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation - Sound Mode Descriptions

BYPASS

Mini Glossary for Audio Stream &

Software with multichannel surround audio signals is played

Surround mode

according to the way it was recorded.

(DTS)

Sound Mode

You can enjoy surround sound simply by selecting one

of the pre-programmed sound fields according to the

program you want to listen to.

Allows you to enjoy 5.1(or 6) discrete channels of high quality

digital audio from DTS program sources such as discs, DVD

and compact discs, etc.bearing the trademark. DTS Digital

Surround delivers up to 6 channels of transparent audio(which

means identical to the original masters) and results in excep-

tional clarity throughout a true 360 degree sound field. The

term DTS is a trademark of DTS Technology, LLC.

Press SOUND MODE repeatedly until the sound mode

you want appears in the display window as below.

Manufactured under license from DTS Technology, LLC.

Each time you press SOUND MODE button, the sound

mode is changed in the following order;

(Dolby Digital)

BYPASS → PRO LOGIC → MOVIE → MUSIC → MATRIX →

3D SURR

The Dolby Digital surround format lets you enjoy up to 5.1

channels of digital surround sound from a Dolby Digital pro-

gram source. If you play DVDs with “

enjoy even better sound quality, greater spatial accuracy, and

improved dynamic range.

” mark, you can

When DVD is inserted.

You can change the sound mode of DVD (Dolby Digital, DTS,

PCM, etc) by pressing the AUDIO button on the remote

during playback.

(Dolby Pro Logic)

Although the DVD contents differ from disc to disc, the follow-

ing explains the basic operation when this feature is used.

Use this mode when playing movie or Dolby Digital 2 channel

which carries the “

” mark. This mode provides the effect

Each time you press AUDIO button, the sound mode of DVD is

changed as the following order;

of being in a movie theater or live concert house-an effect with

an intensity which can only be obtained through DOLBY PRO

LOGIC SURROUND. The effect of the front/back/left/right

movement of the sound image, as well as the sense of fixed

position in the sound image, is much clearer and more dynam-

ic than before.

→

Note

Depending on discs format, you may not be able to change the

sound mode.

(Dolby Pro Logic II)

Dolby Pro Logic II creates five full-bandwidth output channels

from two-channel sources. This is done using an advanced,

high-purity matrix surround decoder that extracts the spatial

properties of the original recording without adding any new

sounds or tonal colorations.

For your reference

•

The DVD/VCR Receiver memorizes the last mode

settings for each source individually.

•

You can identify the encoding format of program

software by looking at its packaging.

MOVIE mode:

The Movie mode is for use with stereo television shows and all

programs encoded in Dolby Surround. The result is enhanced

soundfield directionality that approaches the quality of discrete

5.1-channel sound.

- Dolby Digital discs are labelled with the

- Dolby Surround encoded programs are labelled with

logo.

the

logo.

MUSIC mode:

- DTS Digital Surround discs are marked with

The Music mode is for use with any stereo music recordings, and

provides a wide and deep sound space. The Music mode

includes controls that allow the sound to be tailored to individual

listening tastes.

Note

When you play sound tracks with 96kHz sampling frequency,

the output signals will be converted to 48kHz (sampling

frequency).

MATRIX mode:

The Matrix mode is the same as the Music mode except that the

directional enhancement logic is turned off. It may be used to

enhance mono signals by making them seem “larger.” The Matrix

mode may also find use in auto systems, where the fluctuations

from poor FM stereo reception can otherwise cause disturbing

surround signals from a logic decoder. The ultimate “cure” for

poor FM stereo reception may be simply to force the audio to

mono.

Volume Control

You can adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME (v/V) on the

remote control repeatedly.

3D SURROUND

Muting

This unit can produce a 3D Surround effect, using 3D Surround

Sound technology, which simulates multi-channel audio play-

back from two conventional stereo speakers instead of the five

or more speakers normally required to listen to multi-channel

audio from a home theater. This feature works with DVD discs

encoded with Dolby Pro Logic and Dolby Digital audio tracks.

Press MUTE to mute your unit.

You can mute your unit in order, for example, to answer

the telephone, “MUTE” indicator in the display window

will light up. To exit mute mode, press MUTE again.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup

EASY INFORMATION

On-Screen Display (OSD)

Set the Output Source to VCR as shown in “Selecting

the Input/Output Source” on page 15.

If the Extended Data Service (XDS) signals are provided

along with normal TV signal in your area or during play-

back of a tape recorded with Extended Data Service

(XDS) signals, the station ID, program title, and program

details are shown on the TV screen.

Some of these functions appear during VCR operated.

When viewing a channel with Extended Data Service (XDS)

signals, press ENTER and the station ID will appear on the

TV screen. Press ENTER again and the program details will

appear on the TV screen.

❶

❷

❸

❹

❺

PLAY

HI-FI

CH 4

STEREO

When viewing a tape recorded with Extended Data

Service (XDS) signals, press ENTER twice and the pro-

gram title and program details will appear on the TV

screen.

OCT 8 , SAT

2:15 PM

PROGRAM DETAILS

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

RATING: Indicates the rating of the current program

(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The

rating N/A means that the motion picture ratings are not

applicable to this program.

❻

❼

❶ TAPE SPEED DISPLAY

Shows the current tape speed.

❷ FUNCTION DISPLAY

Indicates the current function.

❸ HI-FI DISPLAY

Indicates the unit is playing back tape recorded in Hi-Fi.

CH 4

WABC STEREO

PROGRAM DETAILS

“Home video”

❹ CHANNEL DISPLAY

ndicates the selected channel (or LINE1(L1), LINE2(L2)).

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

❺ STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻ DATE DISPLAY

“Home video”

OCT 8 , SAT

2:15 PM

Shows the current date. (Month/Date/Day of the week

format)

Easy Information Screen

(Program details)

Easy Information Screen

(Station ID)

❼ CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time

on the tape.

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer

recordings (PROGRAM) are accessed conveniently with

the on-screen menus, that lead you through each step.

The following pages describe the on-screen menu

selections available.

Each press of the ENTER changes the TV

on-screen displays in the following sequence.

STOP

STEREO

Menu Selection

Your VCR allows remote control adjustment of several

features.

OCT 8 , SAT

2:15 PM

1. Press MENU and the MAIN menu will appear.

2:15 PM

0:35:40

2. Select the desired menu with v/V button and

then press ENTER.

REM 1:58

Note

Menus remain on-screen for 3 minutes.

Notes

MAIN MENU

ꢀ The function displays remain on the TV screen for 5

seconds.

CLOCK SET (page 19)

PROGRAM (page 25)

TUNING (page 18)

SETUP (page 18)

ꢀ The clock (or tape counter, tape remaining) mode will remain

on the screen until you press ENTER.

ꢀ The tape counter and the remaining tape length indicator

appear only when a cassette is inserted. Also, the remaining

tape length indicator appears after any tape operation.

3. Press MENU when finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup (Continued)

VCR Setup Menu Options

Channel Selection

This DVD/VCR Receiver is equipped with a

1. Press MENU and the MAIN menu will appear.

frequency synthesized tuner capable of receiving up to

181 channels. These include VHF channels 2-13, UHF

channels 14-69 and CATV channels 1-125.

2. Use v/V to select the SETUP menu, then press

ENTER.

The SETUP menu will appear.

Preparation:

Connect the DVD/VCR Receiver to the desired type of antenna

or cable TV system, as shown in Connecting Antenna/Cable

TV to DVD/VCR Receiver on page 11.

AUTO CHANNEL PROGRAMMING

1. Press MENU and the MAIN menu will appear.

2. Use v/V to select the TUNING menu, then press

ENTER.

3. Use v/V to choose a desired option on the

SETUP menu. Then use b/B to choose a desired

setting.

The TUNING menu will appear.

FUNCTION OSD

The on-screen display of this DVD/VCR Receiver can be turned

on or off.

ꢀ FUNCTION OSD can be switched between ON and OFF

using b/B.

AUDIO MODE

The DVD/VCR Receiver has two separate audio playback sys-

tems, the high quality VHS Hi-Fi system and standard NOR-

MAL mono system. The same audio is generally recorded on

both systems. The VHS Hi-Fi system plays on separate (left

and right) channels, and the NORMAL system plays monaural

sound. The normal track is always played so the cassette can

be played on a DVD/VCR Receiver that does not have VHS

Hi-Fi.

3. Use V to choose the SOURCE SELECT option,

then use b/B to select TUNER.

Press b/B repeatedly to switch between TUNER,

LINE1(L1) and LINE2(L2).

4. Use v/V to choose the AUTO CHANNEL SET option,

then use b/B to search for channels.

ꢀ AUDIO MODE can be switched between HI-FI and

NORMAL using b/B.

The tuner will automatically cycle through all

available channels in the area and place them in the

tuner’s memory.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or

Second Audio Program (SAP) bilingual signals. Set this display to

the desired position when both MTS stereo and SAP signals are

received. When only one of the MTS signal is received, the

DVD/VCR Receiver automatically selects the corresponding

receiving mode (Stereo or SAP) regardless of the selected posi-

tion. For normal operation, the display should be in the STEREO

position. The DVD/VCR Receiver will then record a STEREO pro-

gram when available, and record a mono program IF the program is

NOT IN STEREO.

5. After the AUTO CHANNEL SET PROCEEDING is

complete, make sure the TUNING BAND is set

appropriately (TV or CATV) using v/V and

choosing the correct TUNING BAND (TV or

CATV) by using b/B while in the TUNING menu.

Remember, TV is for the air antenna reception,

CATV is for cable or wireless cable connection.

For weak STEREO and/or SAP broadcasts, changing the dis-

play to mono may give clearer sound.

6. Press MENU to return to the TV screen.

ꢀ BROADCAST TYPE can be switched between STEREO,

SAP, and MONO using b/B.

7. Use CH/TRK (v/V) on the remote control or

CH/PRESET (

) on the front panel to cycle

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

the DVD/VCR Receiver through the channels in

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is

in HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi-

tion, so that when a stereo tape is played, the stereo sound will

be heard through the left and right channels. If a mono tape is

played and the audio output is set to stereo, the same mono

sound will be heard from both left and right channels.

ꢀ AUDIO OUTPUT can be switched between STEREO, LEFT,

and RIGHT using b/B.

memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels in

memory manually.

Press V to choose the CH. ADD/DEL option on the

TUNING menu. Use b/B to select a channel to add

or erase.

4. Press MENU when finished.

Press ENTER to add or erase the channel.

Repeat steps 1 and 2 to add or erase channels.

Press MENU to return to the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation Setup (Continued)

Setting the Clock

The DVD/VCR Receiver gives you two ways to set the

time and date: the Auto Clock Feature or manually. The

Auto Clock feature enables the DVD/VCR Receiver to

set up the clock while the DVD/VCR Receiver is turned

off.

Note

There are cases where the TV station does not send or sends

the wrong time. Therefore, the incorrect time will be set. If this

happens we recommend that you set the clock manually.

Manual Clock Set

Things to know before starting

The clock uses the 12-hour system. (Be sure to set AM

1. Press MENU and the MAIN menu will appear.

ꢀ

2. Use v/V to choose the CLOCK menu.

and PM correctly.)

Press ENTER and the CLOCK menu will appear.

ꢀ

The initial Clock Setting is JANUARY 1, 2005, 12:00 AM.

Auto Clock Set

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD/VCR Receiver looks for a channel carry-

ing XDS (Extended Data Services) information. XDS updates

the clock using the Coordinated Universal Time.

The Auto Clock feature enables the DVD/VCR Receiver

to set up the clock while the DVD/VCR Receiver is

turned off.

3. Use b/B to choose the month.

4. Use V to choose the DAY option.

Use b/B to choose the date.

The day of the week will display automatically.

1. Press MENU and the MAIN menu will appear.

2. Use v/V to choose the CLOCK menu.

5. Use V to choose the YEAR option.

Press ENTER and the CLOCK menu will appear.

Use b/B to choose the year.

6. Use V to choose the TIME option.

Use b/B to choose the time.

Press and hold b/B to advance clock

continuously.

7. Use ^Eto choose the DAYLIGHT SAVINGS option.

Use ^For ^Gto choose AUTO, ON, or OFF.

If you choose AUTO, the VCR sets the clock using the

DST information broadcast in the signal (channel).

If you choose ON, the VCR adjusts the clock for Daylight

Saving Time automatically.

3. Use V to choose the AUTO CLOCK SET option.

Use b/B to choose ON.

4. Use ^Eto choose the DAYLIGHT SAVINGS option.

Use ^For ^Gto choose AUTO, ON, or OFF.

If you choose AUTO, the DVD/VCR Receiver sets the

clock using the DST information broadcast in the signal

(channel). If you choose ON, the DVD/VCR Receiver

adjusts the clock for Daylight Saving Time automatically.

5. Use ^Eto choose the TIME ZONE option.

Use ^For ^Gto choose the correct time zone

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

8. Press MENU when finished.

PACIFIC, ALASKA or HAWAII).

Note

If “AUTO” is selected as the time zone, the DVD/VCR

Receiver sets the clock using the first Coordinated

Universal Time information it finds in a broadcast signal.

If setting the clock manually, “AUTO CLOCK SET” must

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be

entered again when the DVD/VCR Receiver is turned

off.

6. Press MENU when finished.

7. Turn off the DVD/VCR Receiver and the auto

clock set feature sets the time.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup

General Explanation

Temporary Feedback Field Icons

This manual gives basic instructions for operating the

DVD/VCR Receiver. Some DVDs require specific opera-

tion or allow only limited operation during playback.

TITLE

Repeat Title

CHAPT

Repeat Chapter

When this occurs, the symbol

appears on the TV

TRACK

Repeat Track (non-PBC Video CDs

screen, indicating that the operation is not permitted by

the DVD/VCR Receiver or is not available on the disc.

and Audio CD only)

ALL

Repeat Disc (non-PBC Video CDs

and Audio CD only)

On-Screen Display

Set the Output Source to DVD as shown in “Selecting

the Input/Output Source” on page 15.

Repeat A-B

OFF

Repeat Off

Resume play from this point

Action prohibited or not available

General playback status can be displayed on the TV

screen. Some items can be changed on the menu.

Notes

On-screen display operation

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

1. Press DISPLAY during playback.

2. Press 3/4to select an item.

The selected item will be highlighted.

3. Press 1/2to change the setting of an item.

The number buttons can be also used for setting

numbers (e.g., title number). For some functions,

press ENTER to execute the setting.

DVD

Items

Function (Press 3/4to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

titles, and skips to the desired title number.

, or Numbers,

ENTER

1/3

1/12

-:--:--

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or Numbers,

ENTER

Shows the elapsed playing time, and

searches the point directly from the elapsed time.

Numbers, ENTER

, or

Audio language

and Digital Audio

Output mode

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

ENG

5.1 CH

AUDIO

Subtitle language

Shows the current subtitles language, and

changes the setting.

1 2

, or

SUBTITLE

OFF

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

, or

1/1

ANGLE

Sound

Shows the current sound mode, and

changes the setting.

, or

BYPASS

SOUND MODE

VCD1.1

VCD2.0

Items

Function (Press 3/4to select desired item)

Selection Method

Track Number

Shows the PBC On mode or current track number, total

number of tracks and skips to the desired track number.

, or Numbers,

ENTER

1/4

Time

Shows the elapsed playing time (Display only)

–

0:16:57

Audio Channel

Shows the audio channel, and

changes the audio channel.

, or

STER.

AUDIO

Shows the current sound mode, and

changes the setting.

Sound

, or

BYPASS

SOUND MODE

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Initial Settings

Picture

You can set your personal preferences on the DVD/VCR

Receiver.

TV Aspect DVD

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays pictures with masking bars above and

below the picture.

General Operation

1. Press SETUP.

4:3 Panscan: Select when a standard 4:3 TV is con-

nected. Displays pictures cropped to fill your TV screen.

Both sides of the picture are cut off.

The Setup menu appears.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

16:9 Wide: Select when a 16:9 wide TV is connected.

French

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

German

Spanish

Italian

Area Code

TV Aspect

Menu Language

Chinese

Polish

Area Code

TV Aspect

Progressive Scan

Hungarian

Other — — — —

Menu Language

5.1 Speaker Setup

Others

Progressive Scan

5.1 Speaker Setup

Others

2. Use v/V to select the desired option.

The screen will show the current setting for the

selected option, as well as alternate setting(s).

Progressive Scan DVD

Progressive Scan Video provides the highest resolution

pictures with less flicker and line structure.

3. While the desired option is selected, press B,

then v/V to select the desired setting.

If you are using the COMPONENT/PROGRESSIVE

SCAN VIDEO OUT jacks, but are connecting the

DVD/VCR Receiver to a standard (analog) television,

set Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

4. Press ENTER to confirm your selection.

Some options require additional steps.

5. Press SETUP, RETURN, or PLAY to exit the setup

menu.

Language

Off

Disc Audio

Disc Subtitle

Disc Menu

Disc Language DVD

Select a language for the disc’s Menu, Audio, and

Subtitle features.

Original : The original language set for the disc is selected.

Other : To select another language, use number buttons to

enter the corresponding 4-digit number according to the

language code list on page 44. If you enter the wrong

language code, press CLEAR.

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Note

Disc Language selection may not work for some DVDs.

Original

English

Disc Audio

Disc Subtitle

Disc Menu

Rating

Caution

Once the setting for progressive scan output is entered,

an image will only be visible on a progressive scan

compatible TV or monitor. If you set Progressive Scan

to On in error, you must reset the unit.

French

German

Spanish

Italian

Area Code

TV Aspect

1) Remove any disc from the unit and close the disc

tray. See that “NO DISC” is displayed on the display

window.

2) Press STOP (9) and hold it for more then five

seconds before releasing it. The video output will be

restored to the standard setting and a picture will

once again be visible on a conventional analog TV or

monitor.

Menu Language

Chinese

Polish

Progressive Scan

Hungarian

Other — — — —

5.1 Speaker Setup

Others

Menu Language

Select a language for the VCR and DVD Setup menu.

This is the menu you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Speaker setup

DVD

Auto Play

You can set up the DVD/VCR Receiver so a DVD disc

automatically starts playing whenever the DVD is insert-

ed.

If Auto Play mode is set to On, this DVD/VCR Receiver

will search a title where playback time is longest and

then play back the title automatically.

5.1 Speaker settings DVD

Select speaker settings, including volume balance and

distance, or test the speaker settings.

Speaker settings are only active on the Analog Multi-

Channel Output. (See “Speaker Setup”, page 37.)

On: Auto Play function is activated.

Disc Audio

Off: Auto Play function is not activated.

Disc Subtitle

Disc Menu

Rating

Note

Front

Volume

Size

0 dB

Small

1 ft

The Auto Play function may not work for some DVDs.

Area Code

TV Aspect

Distance

Test

Menu Language

Progressive Scan

B.L.E. (Black Level Expansion)

Return

VCD2.0

VCD1.1

DVD

5.1 Speaker Setup

Others

To select the black level of playback pictures. Set your

preference and monitor’s ability.

Others

On: Expanded grey scale. (0 IRE cut off)

The DRC, Vocal, PBC, Auto Play, B.L.E., Pluge and

DNR settings can be changed.

Off: Standard grey scale. (7.5 IRE cut off)

ꢀ Use 3/4to select the desired item and press

ENTER. The setting of the selected item is changed

between On and Off.

Pluge (Blacker than Black) DVD

For proper adjustment of your television brightness

settings utilizing a commercially available test disc.

Disc Audio

Disc Subtitle

Disc Menu

Rating

On: Select when you adjust the level of your TV using a

commercially available test disc that contains pluge sig-

nals.

Area Code

TV Aspect

Off: For normal use.

Menu Language

Progressive Scan

DNR (Digital Noise Reduction)

VCD2.0

VCD1.1

DVD

5.1 Speaker Setup

Others

You can reduce ambient noise in the picture.

DNR1: Normal level

Dynamic Range Control (DRC) DVD

DNR2: Expanded level.

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

Off:

Off.

Notes

^ꢀActual picture enhancement may vary depending on the

quality of the disc.

^ꢀWhile the DNR2 (expanded level) can provide additional

improvement in the reduction of noise in the video signal, it

may produce undesirable picture artifacts on some discs.

Should this occur, select a more appropriate DNR level (nor-

mal or off).

Vocal DVD

^ꢀDepending on the disc, some picture detail may be lost by

the picture enhancement.

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

VCD2.0

VCD1.1

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation Setup (Continued)

Parental Control

DVD

Area Code

Rating DVD

Enter the code of a area whose standards were used to

rate the DVD video disc, referring to the list (See “Area

Code List”, page 45).

Movies on DVDs may contain scenes not suitable for chil-

dren. Therefore, discs may contain Parental Control infor-

mation that applies to the complete disc or to certain

scenes on the disc. These scenes are rated from 1 to 8,

and alternatively, more suitable scenes are available for

selection on some discs. Ratings are area dependent.

DVD video discs may or may not respond to the parental

control setting if the Area code of the disc is set wrongly.

The Parental Control feature allows you to prevent discs

from being played by your children or to have certain discs

played with alternative scenes.

Code Set

Disc Audio

Disc Subtitle

Disc Menu

Rating

Area Code

TV Aspect

Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Disc Audio

Disc Subtitle

Disc Menu

Rating

1. Select Area Code using the v/V buttons on the

setup menu.

Area Code

TV Aspect

2. While Area Code is selected, press B.

3. Follow step 3 of “Rating” on left.

Menu Language

Progressive Scan

Unlock

Change

5.1 Speaker Setup

Others

4. Select the first character using the v/V buttons.

5. Press 2 to shift to second character and select

1. Select Rating on the Setup menu using v/V

the second character using v/V buttons.

buttons in stop mode.

6. Press ENTER to confirm your Area code

selection, then press SETUP to exit the menu.

2. While Rating is selected, press B.

3. When you have not entered a password yet.

Enter a 4-digit password using the numbered but-

tons to create a personal 4-digit security password,

then press ENTER. Enter the 4-digit password again

and press ENTER to verify.

Note

Confirmation of the 4-digit password is necessary when

the password is changed (see Changing the 4-digit

password below ).

When you have already entered a password;

Enter a 4-digit password using the numerical

buttons to confirm the personal 4-digit security pass-

word, then press ENTER.

Changing the 4-digit password

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old password, then press ENTER.

3 Select Change using v/V buttons then press

ENTER.

If you make a mistake before pressing ENTER, press

CLEAR and enter 4-digit security password again.

4. Select a rating from 1 to 8 using v/V buttons.

One (1) has the most playback restrictions. Eight

(8) has the least playback restrictions.

The limitation will be more severe as the level

number decreases.

4 Enter the new 4-digit password, then press

ENTER.

5 Enter exactly the same password a second time and

verify by pressing ENTER.

6 Press SETUP to exit the menu.

Unlock: If you select Unlock, Parental Control is not

active. The disc will play in full.

If you forget your 4-digit password

Ratings 1 to 8: Some discs contain scenes not suit-

able for children. If you set a rating for the DVD, all

disc scenes with the same rating or lower will be

played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

If you forget your password, to clear the current pass-

word follow the procedure below.

1 Press SETUP to display the setup menu.

2 Enter the 6-digit number 210499.

The 4-digit password is cleared.

3 Enter a new password as shown above to the left

(Rating).

5. Press ENTER to confirm your rating selection,

then press SETUP to exit the menu.

6. Press OPEN/CLOSE to activate the Parental

Control. If the rating set is lower than the disc

rating, a message will appear. Select “YES” if

you want to continue playback and input the

password followed by ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation

Normal Playback

Special Effect Playbacks

Preparation:

Special effects playback notes

^ꢀTurn on the TV.

ꢀ Horizontal lines (noise bars) will appear on the TV screen.

This is normal.

ꢀ The audio is automatically muted during special effect modes,

so there is no sound during search.

ꢀ During high-speed picture search mode, a short period is

needed to stabilize tape speed when re-entering the PLAY

mode. Slight interference may be observed during this period.

^ꢀTune the TV to the DVD/VCR Receiver output channel (CH

3 or 4) or set the TV’s source selector to VIDEO.

^ꢀIf a direct VIDEO/AUDIO connection is made between the

DVD/VCR Receiver and the TV, set the TV’s source selector

to VIDEO.

^ꢀSet the Output Source to VCR as shown in “Selecting the

Input/Output Source” on page 15.

1. Insert a prerecorded video cassette.

This function lets you quickly and visually search for a

desired tape section in either direction: forward or

reverse.

The

indicator will light and the DVD/VCR Receiver

will power-up automatically.

ꢀ Make sure that the

window is not lighted. If it is, press POWER once.

indicator in the display

1 Press REW (m) or FWD (M) during playback. The

DVD/VCR Receiver will be activated in the SEARCH

mode.

ꢀ If a tape without a safety tab is inserted, the unit will

2 To return to playback, press PLAY.

start playback automatically.

2. Press PLAY once.

Still Picture and Frame-by-Frame

Playback

1 Press PAUSE/STEP during playback.

Still picture will appear on the TV screen.

PLAY appears on the TV screen .

ꢀ It is not necessary to select the tape speed for

playback. It will be automatically selected by the

DVD/VCR Receiver.

ꢀ If a still picture vibrates vertically, stabilize it using

ꢀ In playback, the TV/VCR selector switches to VCR

CH/TRK(v/V) on the remote control.

mode automatically.

ꢀ If the DVD/VCR Receiver is left in the STILL mode for

more than 5 minutes, the DVD/VCR Receiver will auto-

matically enter the STOP mode to protect the tape and

video heads.

3. Press STOP to stop playback.

STOP appears on the TV screen.

ꢀ If the tape reaches the end before STOP is pressed, the

DVD/VCR Receiver will automatically stop, rewind and

eject the tape, and it will turn itself off.

2 Press PAUSE/STEP repeatedly to advance the

video picture one frame at a time while viewing a still

picture.

Tracking Control

3 To return to playback, press PLAY.

Auto Tracking

Slow Motion

1 Press SLOW.

The automatic tracking function adjusts the picture to

remove snow or streaks.

The tape will be played back at a speed 1/19 times

slower than the normal speed.

The AUTO TRACKING function works in the following

cases:

ꢀ During slow playback, use CH/TRK (v/V) on the Remote

Control to minimize noise bands.

ꢀ A tape is played back for the first time.

ꢀ Tape speed (SP, SLP) changes.

ꢀ If slow motion mode continues for more than 3 minutes,

the DVD/VCR Receiver will automatically change to play-

back mode.

ꢀ Streaks or snow appear because of scratches on the tape.

Manual Tracking

2 To return to playback, press PLAY.

If noise appears on the screen during playback, press

either CH/TRK (v/V) on the remote control or CH/PRE-

SET (

screen is reduced.

) on the front panel until the noise on the

Variable playback speed control

During Playback use b/B, you can reach the follow-

ing playback speeds.

(-7xplay (REV), -3xplay (-3PLY), -play (-PLAY), still

(STILL), 1/19 slow (SLOW), play (PLAY), 2xplay (2PLY),

7xplay(CUE)).

During slow motion and shuttle, the noise bars may

appear on the picture according to the status of tape.

If distortions can be seen in the picture, reduce them

with CH/TRK (v/V) on the remote control.

ꢀ If vertical jitter is present, adjust tracking controls very

carefully.

ꢀ Tracking is automatically reset to normal when the tape is

ejected or the power cord is unplugged for more than 3

seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Normal Recording

Timer Recording

Preparation:

This DVD/VCR Receiver can be programmed to record

up to 8 programs within a period of 1 year. For unattend-

ed recording, the timer needs to know the channels to be

recorded and the starting and ending times.

^ꢀTurn on the power of both the DVD/VCR Receiver and TV.

^ꢀTune the TV to the DVD/VCR Receiver output channel (CH 3

or 4) or set the TV’s source selector to VIDEO.

^ꢀIf a direct VIDEO/AUDIO connection is made between the

DVD/VCR Receiver and the TV, set the TV’s source selector

to VIDEO.

Things to know before starting

ꢀ

If you try to set the program timer before setting the clock,

^ꢀThe unauthorized recording, use, distribution, or revision of

television programs, videotapes, DVDs and other materials,

is prohibited under the Copyright Laws of the United States

and other countries, and may subject you to civil and/or

criminal liability.

PLEASE SET THE CLOCK appears for a moment and

then CLOCK menu appears on the TV screen. Set the time

and date before proceeding.

Make sure a tape is in the DVD/VCR Receiver and the

safety tab is in place or the tape will be automatically

ejected.

ꢀ

1. Insert a video cassette with the safety tab intact.

Preparation:

2. Select the desired channel with CH/TRK (v/V) or

^ꢀTurn on the power of both the DVD/VCR Receiver and the

TV.

number (0-9) buttons.

If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select LINE1(L1)

or LINE2(L2) with INPUT.

ꢀ

Be sure the TV is set to the DVD/VCR Receiver output channel

(CH3 or CH4).

^ꢀMake sure the TUNING BAND in the TUNING menu is set

appropriately (TV or CATV).

3. Set the desired recording speed (SP or SLP) with

the SP/SLP button.

1. Press MENU and the MAIN menu will appear.

4. Set the MTS mode as desired (See page 18, 28).

2. Use v/V to choose the PROGRAM menu.

5. Press REC/ITR (z) once.

3. Press ENTER to go to the PROGRAM menu.

Recording will start. (The REC indicator will light in

the display window.)

The PROGRAM menu will appear.

^ꢀIf all 8 programs have been entered, FULLY

PROGRAMMED message will appear for a moment

and then PROGRAM 1 will appear on the TV screen.

^ꢀREC indicator appears only when the Output Source is

set to VCR.

^ꢀIf a cassette with no safety tab is loaded, the cassette

will be ejected automatically.

6. Press STOP to stop recording.

If the tape reaches the end before STOP is pressed, the

DVD/VCR Receiver will automatically stop, rewind, eject

the tape and turn itself off.

4. Use b/B to choose the PROGRAM No. (1-8).

To pause recording

5. Use V to choose the MONTH option.

1 Press PAUSE/STEP to pause the tape during

recording.

Use b/B to choose the desired month.

6. Use V to choose the DAY option.

The REC indicator will flash in the display window.

Use b/B to choose the desired day.

2 When you want to continue recording, press

PAUSE/STEP or REC/ITR (z).

^ꢀAfter 5 minutes in Pause mode, the tape will be stopped

automatically to protect the tape and the video heads.

7. Use V to choose the START option.

Use b/B to choose the desired start time.

8. Use V to choose the STOP option.

Use b/B to choose the desired stop time.

To record one TV program while

watching another

1 Use TV/VCR to select the TV mode during recording.

“TV” appears in the display window.

9. Use V to choose the CHANNEL option.

Use b/B to choose the desired channel

(Channel, LINE1(L1) or LINE2(L2)).

2 Using the TV, select the channel to be viewed.

Cable Users: If you have CABLE TV and used Cable Box

in Connecting Antenna/Cable TV to DVD/VCR Receiver

(page 11), using a cable box converter, you must set the

channel in this step to match the cable box output channel

(usually CH 3 or 4). Change channels on the cable box

instead of with the DVD/VCR Receiver.

Tips

Always use PAUSE/STEP for best results when making

changes during recording.

For example: To change channels during recording, first press

PAUSE/STEP to put the unit in pause mode. Select the desired

channel on the DVD/VCR Receiver, then press PAUSE/STEP

again to resume recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Notes

10. Use V to choose the SPEED option.

Use b/B to choose the desired recording speed

(AUTO, SP or SLP).

^ꢀIf the power fails or the DVD/VCR Receiver is unplugged

from the AC outlet, the correct clock time and timer settings

are kept in memory for approximately 3 seconds. After 3

seconds, the clock and program timer must be reset when

power is restored. Reset the clock according to instructions.

AUTO mode determines how much tape is left and switch-

es speed from SP to SLP, if necessary, to complete record-

ing the program. There will be some picture and sound dis-

tortion at the point of the speed change.

^ꢀAfter setting up a timer recording, recording will start if no

other timer recordings are scheduled to occur at the same

time (see “Program Priority” at right).

11. Use V to choose the REPEAT option.

Use b/B to choose the desired repeat (ONCE,

WEEKLY or DAILY).

^ꢀThe unauthorized recording, use, distribution, or revision of

television programs, videotapes, DVDs and other materials,

is prohibited under the Copyright Laws of the United States

and other countries, and may subject you to civil and/or

criminal liability.

ONCE event....for recording up to 8 programs on a single

day or over the days within a period of 1 year.

WEEKLY event....for recording up to 8 programs on a cer-

tain day of every week.

Checking (Erasing) Timer Record

Programming

Programming can be checked whenever the DVD/VCR

Receiver is turned on.

DAILY event....for recording up to 8 programs at the same

time(s) Monday through Friday.

1 Press MENU and the MAIN menu will appear.

2 Use v/V to choose the PROGRAM menu.

Press ENTER and the PROGRAM menu will appear.

Tip

If the input data is wrong, use v to select the data and cor-

rect it using b/B.

3 Use b/B to select a program you want to check or

erase. If you want to erase the program, press

CLEAR.

12. Press MENU, the program will be memorized by

the DVD/VCR Receiver.

4 Press MENU to return to the TV screen.

ꢀ

indicator lights in the display window.

^ꢀIf the program preset time has past, the PAST TIME

PROGRAMMED message will appear on the TV screen.

Return to the incorrect program and program it with the

correct time.

^ꢀIf you had entered a past date, timer recording will be

performed on that date of the next year.

^ꢀAdditional programs may be entered by repeating steps

1-12.

Program Priority

If the starting and ending times of two or more timer

recordings overlap on the

same day, priority is given to

the earliest recording. For

example, in the diagram at

left PROGRAM 2 will not be

recorded until PROGRAM 1

is finished. The first part of

Cable Users: If your cable hookup is via a TV

converter box, you can program multiple recordings only on

the converter box output channel. This is because the con-

verter determines what channel you view through your

DVD/VCR Receiver.

PROGRAM 2 will not be recorded. Likewise, PRO-

GRAM 3 will not be recorded until PROGRAM 2 is fin-

ished, and so on.

Tip

If you have finished programming and you want to set the

DVD/VCR Receiver to record the programs you have entered,

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE

DVD/VCR Receiver. The DVD/VCR Receiver is now set to

record the preset programs.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Instant Timer Recording

Dubbing and Editing

Instant Timer Recording allows you to make a recording

easily of a preset length without using the programma-

ble timer.

If you wish to edit or dub your camcorder (or another

VCR) recordings to this DVD/VCR Receiver, the rear

(or Front) panel mounted Audio and Video (A/V) input

jacks make the connections quick and easy. These

direct A/V jacks will also provide better picture results

than using the RF jack on the rear panel.

Preparation:

ꢀ Turn on the power of both the DVD/VCR Receiver and the TV.

ꢀ Be sure the TV is tuned to the DVD/VCR Receiver output channel

(CH3 or 4).

1. Connect the camcorder’s (or another VCR’s) A/V

outputs to your DVD/VCR Receiver as illustrated on

page 14.

ꢀ If a direct VIDEO/AUDIO connection is made between the

DVD/VCR Receiver and the TV, set the TV’s source selector to

VIDEO.

2. Select the input channel “LINE2” (Use INPUT to

select LINE2(L2)).

1. Insert a video cassette with the safety tab intact.

2. Select the desired channel with CH/TRK (v/V) or

number (0-9) buttons.

If you have connected your DVD/VCR Receiver to the A/V

input jacks on the rear of DVD/VCR Receiver, you should

select the input channel LINE1(L1) by pressing INPUT

twice.

The channel number appears on the TV screen.

ꢀ If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select

LINE1(L1) or LINE2(L2).

3. Play the tape in the camcorder (or another VCR).

If you have a TV attached to your DVD/VCR

Receiver, you can see the video playing.

3. Select the desired recording speed (SP or SLP)

with the SP/SLP button.

4. When you desire the recording to begin, press

DVD/VCR Receiver’s REC/ITR (z) once to start.

You can stop the recording by pressing STOP.

The tape speed will appear on the TV screen.

4. Press REC/ITR (z) twice.

The menu as illustrated, will appear on the TV screen.

Note

Before recording, please confirm the recording start position.

ꢀ Recording will start. (The

indicator will light)

5. Press REC/ITR (z) repeatedly to select the

recording time length.

Copying from DVD to VCR

This unit allows you to copy the contents of a DVD to a

VHS tape.

At the end of the recording, the DVD/VCR Receiver

will stop recording and shut off.

Press DVD/CD to select DVD mode.

ꢀ During Instant Timer Recording, changing the channel

on the DVD/VCR Receiver will not be possible.

ꢀ You can stop the recording by pressing STOP.

ꢀ Each additional press or REC/ITR(z) increases record-

ing time by 30 minutes until you reach a maximum of 9

hours.

1. Insert Disc

Insert the disc you wish to copy in the DVD deck

and close the disc tray.

2. Insert VHS Tape

Insert a blank VHS video tape into the VCR deck.

Checking the Recording Time

Press REC/ITR (z) once to check the recording time.

The recalled setting will automatically return to the TV

screen after 6 seconds.

3. Press COPY button on the unit front panel or

press REC/ITR (z) button on the remote control.

The DVD will go into Play mode and the VCR will go

into Record mode.

To extend the Recording Time

The recording time can be extended anytime by press-

ing REC/ITR (z).

Subsequent presses result in advancing the recording

time by 30-minute increments.

ꢀ If the DVD disc menu appears, you may need to press

PLAY manually to begin copying.

ꢀ “COPY” indicator will light.

4. Stopping the Copy Process

When the DVD is finished playing, press STOP to end

copying.

Notes

ꢀ If you press PAUSE/STEP during instant timer recording, the

DVD/VCR Receiver will enter the recording pause mode.

Instant timer recording is cancelled.

ꢀ If the DVD/VCR Receiver is set to “0H00M”, the DVD/VCR

Receiver goes to normal recording mode.

You must stop the Copy process manually when the DVD

movie ends, or the unit may replay and record over and

over again.

Notes

ꢀ If the DVD you are attempting to copy is copy protected, you

will not be able to copy the disc. It is not permitted to copy

Macrovision encoded DVDs. “LOCK” is displayed in the dis-

play window.

ꢀ When you stop the DVD playback during copying, VCR

recording mode also stops automatically.

ꢀ You must set Progressive Scan to Off to copy process.

ꢀ The unauthorized recording, use, distribution, or revision of

television programs, videotapes, DVDs and other materials,

is prohibited under the Copyright Laws of the United States

and other countries, and may subject you to civil and/or

criminal liability.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

VHS Hi-Fi Stereo System/

MTS Broadcast

MTS (Multi-Channel TV Sound)

This DVD/VCR Receiver will decode MTS stereo and

bilingual (SAP) off-the-air broadcast sound signals. It

also decodes stereo TV sound from local cable compa-

nies, as long as they operate on assigned cable fre-

quencies and use the EIA-recommended MTS

This DVD/VCR Receiver is equipped with the VHS Hi-Fi

audio sound system for recording and playback. The

information below gives a brief description of Hi-Fi audio

and how to record and play a tape in the Hi-Fi audio

mode.

stereo/bilingual TV sound system.

Multichannel TV Sound Indicator (MTS)

Playback with Hi-Fi Stereo Audio Sound

Shows onscreen as illustrated below when ENTER is

A stereo TV with AUDIO/VIDEO input jacks or a stereo

audio system is required for true stereo playback. To

experience the full and rich stereo sound available with

Hi-Fi recorded tapes, we recommend the connection of

this unit to a home stereo audio system.

pressed.

ꢀ

One or both of the indicators will light, depending on the

MTS broadcast.

TV screen

STEREO

Lights up when a stereo broadcast

is being received.

CH 4

STEREO/SAP

1. Set the AUDIO MODE option to HI-FI on the

SETUP menu .

SAP

Lights up when a SAP BILINGUAL

broadcast is being received.

If only STEREO appears on the TV screen.

The DVD/VCR Receiver can record in stereo onto the VHS Hi-

Fi audio tracks when the BROADCAST TYPE option is in the

STEREO position. The DVD/VCR Receiver will also record

mono audio onto the mono audio track.

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

2. Set the AUDIO OUTPUT option to STEREO

position.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired

recording mode (STEREO or SAP).

STEREO: The left channel sound (L) is heard from the left

speaker and the right channel sound (R) is heard from the

right speaker.

LEFT: The left channel sound (L) is heard from both

speakers.

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which

is used for a second language or additional information.

When the station broadcasts a Second Audio Program,

follow the procedure below to record the SAP.

RIGHT: The right channel sound (R) is heard from both

speakers.

1. Insert a video cassette with the safety tab intact.

2. Set the BROADCAST TYPE option to SAP

(SETUP menu).

Do this if only the SAP appears on the TV screen or you

know the program will use the SAP.

3. Press MENU.

4. Insert a cassette and press PLAY.

Adjust volume at your stereo system.

3. Press MENU.

4. Select the desired recording speed (SP or SLP)

with the SP/SLP button.

5. Select the desired channel. SAP should appear

on the TV screen.

6. Press REC/ITR (z) once

You are now recording the program you see and hear on the

TV.

7. Press STOP to stop recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Operation (Continued)

Tape Counter Memory Feature

Additional Information

ꢀ

In manual recording, Timer recording, Instant Timer

Recording, playback, or fast forward modes, the DVD/VCR

Receiver automatically starts rewinding the tape at the end

of the tape. The cassette will stop at the beginning of the

tape and be ejected, and the DVD/VCR Receiver will turn

itself off.

Real-Time Counter

Shows length of tape run in hours, minutes, and

seconds. Press CLK/CNT to select the real-time

counter display.

Every press of CLK/CNT changes the TV screen as

illustrated below.

ꢀ

After you have finished using the DVD/VCR Receiver,

rewind, eject, and remove the cassette. Place the cassette

in its protective sleeve to protect it from dust. It is not nec-

essary to rewind the cassette before removing it, but if you

do, it will be ready to play or record the next time you use it.

2:15 AM

CLOCK

0:05:25

COUNTER

REM 1:07

REMAINING TIME

Be sure the DVD/VCR Receiver Channel Selector is on the

correct channel you wish to record. The channel that is

being recorded can always be checked by tuning the televi-

sion to the DVD/VCR Receiver channel (3 or 4) and press-

ing the VCR button to set the DVD/VCR Receiver to VCR

mode (VCR appears in the display window).

ꢀ

Counter changes to “0:00:00” when the cassette is

ejected.

The real-time counter does not operate if nothing is

recorded on the tape.

The real-time counter will not work unless a tape is

inserted.

ꢀ

Do not attempt to hook up more than one television set to

the DVD/VCR Receiver for either recording or playback.

Note

During the “L1 OPT” mode, the OSD(On Screen

Display) can not be changed.

Auto Play System

This DVD/VCR Receiver features automatic playback.

Load a cassette (with the safety tab removed).

Counter Memory Feature

This is useful if there is a section of tape you want to

view immediately after recording or if you want to return

to the same point several times.

ꢀ

The Output Source is changed to VCR mode automatically.

The power turns on automatically and playback begins.

At the end of the tape, the DVD/VCR Receiver stops and

rewinds the tape.

ꢀ

The cassette is ejected after rewinding and the VCR turns

itself off automatically.

1. Begin recording or playing a tape.

2. Press CLK/CNT repeatedly to display the

real-time counter on the TV screen.

3. At the point that you want to locate later, reset

the real-time counter to “0:00:00” by pressing

CLEAR.

4. Continue to play or record.

Note

Auto power off does not function during regular DVD play

mode. (DVD/VCR Receiver power stays on.)

5. Press STOP when recording or playback

finishes.

6. Press REW (

S-VHS Quasi Playback (SQPB)

The tape automatically stops when the tape counter

returns to about “0:00:00”.

ꢀ

This DVD/VCR Receiver can also play back a tape which is

recorded in S-VHS playback picture.

ꢀ

This DVD/VCR Receiver cannot record in S-VHS format

SQPB is an abbreviation for S-VHS Quasi Playback.

Tape Remaining

This function shows the remaining time on the tape

during recording or playback.

Press CLK/CNT repeatedly until the REM indicator

displays on the TV screen during recording or playback.

Note

The remaining tape length indicator may not be displayed

correctly depending on the condition of the tape and the kind of

the tape (T-140, T-160, or T-210 etc)

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation

Playing DVD and Video CD

General Features

Note

Playback Setup DVD

ꢀ Turn on the TV and select the video input source connected

to the DVD/VCR Receiver.

ꢀ Audio system: Turn on the audio system and select the input

source connected to the DVD/VCR Receiver.

ꢀ Set the Output Source to DVD as shown in “Selecting the

Input/Output Source” on page 15.

VCD2.0

VCD1.1

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

Moving to another TITLE

1/3

DVD

1. Press OPEN/CLOSE ( ) to open the disc tray.

If a disc has more than one title, you can move to

another title as follows:

2. Load your chosen disc in the tray, with the label

facing up.

ꢀ

Press DISPLAY, then press the appropriate number

buttons (0-9) to select a title number.

When a double-sided DVD is inserted, make sure

the side you want to play is facing down.

Moving to another CHAPTER/TRACK

3. Press OPEN/CLOSE ( ) to close the tray.

“READING” appears in the display window, and

playback starts automatically. If playback does not

start, press PLAY.

1/12

1/3

VCD1.1

DVD

VCD2.0

If a title on a disc has more than one chapter or a disc

has more than one track, you can move to another

chapter/track as follows:

In some cases, the disc menu might appear instead.

ꢀ Press SKIP (.) or (>) briefly during playback to

return to the beginning of the current chapter/track or

to select the next chapter/track.

^ꢀPress SKIP (.) twice in quick succession to step

back to the previous chapter/track.

If a menu screen is displayed

A menu screen may appear automatically after loading a

DVD.

DVD

^ꢀTo go directly to any chapter/track during playback,

press DISPLAY. Use v/V to select Chapter/track icon.

Then, enter the chapter/track number with the number

buttons (0-9).

Use b/B/v/V buttons to select the title/chapter you

want to view, then press ENTER to start

playback.

Press TOP MENU or DISC MENU to return to the menu

screen.

Note

For two-digit numbers, press the numbered buttons

(0-9) in rapid succession.

VCD2.0

^ꢀUse the number buttons to select the track you want

to view.

VCD2.0

VCD1.1

DVD

Slow Motion

Press RETURN to return to the menu screen.

^ꢀMenu setting and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page

22.

1 Press SLOW during playback or still mode.

The player will enter SLOW mode.

2 Use REW or FWD (or SLOW) to select the required

speed:

t 1/16, t 1/8, t 1/4, t 1/2 (backward), or

T 1/16, T 1/8, T 1/4, T 1/2 (forward).

Notes

3 To return to playback, press PLAY.

ꢀ If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit password

must be entered and/or the disc must be authorized

(see Parental Control, on page 23).

Note

Slow motion playback in reverse is not applicable for

Video CD.

ꢀ DVDs may have a Region Code.

Still Picture and Frame-by-Frame

Your DVD/VCR Receiver will not play discs that have

a Region Code different from your DVD/VCR

Receiver. The Region Code for this DVD/VCR

Receiver is 1 (one).

ꢀ Do not keep a fixed image displayed on the screen

for a long time.

VCD2.0

VCD1.1

DVD

Playback

1 Press PAUSE/STEP during playback.

The DVD/VCR Receiver will go into PAUSE mode.

2 You can advance the picture frame by frame by

pressing PAUSE/STEP repeatedly on the remote con-

trol.

3 To return to playback, press PLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation (Continued)

Repeat A-B

General Features (Continued)

OFF

VCD2.0

VCD1.1

DVD

VCD2.0

VCD1.1

DVD

To repeat a sequence in a title:

1 Press REW (m) or FWD (M) during playback.

The DVD/VCR Receiver will now go into SEARCH mode.

2 Each press of the REW (m) or FWD (M) button

will increase the speed of the search mX2, mX4,

mX16, mX100 (backward) or MX2, MX4,

MX16, MX100 (forward).

1 Press REPEAT A-B at your chosen start point.

“ A * ” appears briefly on the TV screen.

2 Press REPEAT A-B again at your chosen end point.

“A B” appears briefly on the TV screen, and the repeat

sequence begins.

3 To cancel the sequence, press REPEAT A-B.

With a Video CD, the Search speed changes: mX2,

mX4, mX8, (backward) or MX2, MX4, MX8,

(forward).

3D Surround

3 To return to playback, press PLAY.

BYPASS

3D SUR

VCD2.0 VCD1.1

DVD

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

VCD2.0

VCD1.1

Karaoke DVD

Random

1 Press RANDOM during playback or in Stop mode.

The unit automatically begins Random Playback and

“RANDOM” appears on the TV screen.

2 To return to normal playback, press RANDOM until

“NORMAL” appears on the TV screen.

1 Press SOUND MODE to select “3D SUR” during

playback.

2 To turn off the 3D Surround effect,

press SOUND MODE again to select “BYPASS”.

Tips

By pressing SKIP (. or >) during Random play-

back, the unit selects another title (track) and resumes

Random playback.

0:16:57

- : - - : - -

DVD

Time Search

Notes

The Time Search function allows you to start playing at

any chosen time on the disc.

^ꢀThis function only works with DVD Karaoke discs and

Video CD without PBC.

^ꢀOn a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Random function. See

page 22.

1 Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

2 Within 10 seconds, use v/V to select the Time

Search icon in the on-screen display.

VCD2.0

VCD1.1

DVD

Repeat

The “-:--:--” appears in the Time Search box.

3 Within 10 seconds, use the numbered buttons to

enter the required start time. Enter hours, minutes

and seconds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

4 Within 10 seconds, press ENTER.

Playback starts from the selected time on the disc. If you

enter an invalid time, playback will continue from the current

point.

CHAPT

TRACK

ALL

TITLE

OFF

DVD Video Discs - Repeat Chapter/Title/Off

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

VCD2.0

VCD1.1

DVD

Zoom

Video CDs - Repeat Track/All/Off

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat All icon appears on the TV screen.

3 To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

2 Use b/B/v/V buttons to move through the zoomed

picture.

3 Press CLEAR to resume normal playback or return to

the paused image.

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Repeat function. See page 22.

Notes

ꢀ The Zoom function may not work with some DVDs.

ꢀ The Zoom function may not work with some

multi-angle scenes.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD and Video CD Operation (Continued)

General Features (Continued) Special DVD Features

Checking the contents of DVD Video

VCD2.0

VCD1.1

DVD

Marker Search

MARKER SEARCH

discs: Menus

1/9

DVDs may contain menus that allow you to access spe-

cial features. To use the disc menu, press DISC MENU.

Then, press the appropriate number button to select an

option. Or, use b/B/v/V buttons to highlight your selec-

tion, then press ENTER.

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

1 During disc playback, press MARKER when playback

reaches the spot that you want to memorize.

The Marker icon will appear on the TV screen briefly.

2 Repeat step 1 to enter up to nine Marker points on a

disc.

DVD

Title Menu

1 Press TOP MENU.

To Recall a Marked Scene

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to recall.

3 Press ENTER.

Playback will start from the Marked scene.

4 To remove the MARKER SEARCH menu, press

SEARCH.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

3 To remove the title menu, press TOP MENU again.

DVD

Disc Menu

To Clear a Marked Scene

1 Press DISC MENU.

1 During disc playback, press SEARCH.

The Marker Search menu will appear on the screen.

2 Within 10 seconds, use 1/2 or number button to

select a Marker number that you want to erase.

3 Press CLEAR.

The Marker number will be erased from the list.

4 Repeat steps 2 and 3 to erase additional Marker

numbers.

The disc menu is displayed.

2 To remove the disc menu, press DISC MENU again.

1/1

DVD

Camera Angle

If the disc contains sequences recorded from different

camera angles, the angle icon appears for a short while

on the TV screen. You can then change the camera

angle if you wish.

5 To remove the MARKER SEARCH menu, press

SEARCH.

^ꢀAll markers are erased when the disc is ejected.

ꢀ

Press ANGLE repeatedly during playback to select a

desired angle.

DVD

The number of the current angle appears on the display.

Changing Video Mode

^ꢀWith certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

^ꢀTo change the video mode, press and hold

DISPLAY about 3 seconds during disc playback. The

new video mode selected is displayed on the TV

screen. Check whether the video quality has

improved. If not, repeat the above procedure until pic-

ture quality is improved.

Changing the Audio Language

ENG

DVD

5.1 CH

Press AUDIO repeatedly during playback to hear a

different audio language or audio track.

Changing the Audio Channel

STER.

RIGHT

LEFT

VCD2.0

VCD1.1

^ꢀVideo mode sequence:

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STER., LEFT or RIGHT).

Auto

Film

Video

Auto

→

^ꢀIf you turn off the power, the video mode will return to

initial default state (Auto).

ENG

DVD

Subtitles

Detailed Description of each Video Mode

Auto : The source material of the DVD video (film material or

video material) is determined from disc information.

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

Film : Suitable for playing film based content or video based

material recorded by the progressive scan method.

Video : Suitable for playing video based content with

comparatively little motion.

Note

appears, the feature is not available on the disc.

Screen Saver

The screen saver picture appears when you leave the

DVD/VCR Receiver in Stop mode for about five min-

utes.

Note

The video mode setting only works when the Progressive Scan

mode is set to “On” in the Setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3/WMA Disc Operation

Playing an Audio CD and MP3/WMA

Notes on MP3/WMA Recordings

MP3

About MP3

WMA

Discs

^ꢀAn MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^ꢀThe DVD/VCR Receiver can not read an MP3 file

that has a file extension other than “.mp3”.

The DVD/VCR Receiver can play MP3/WMA formatted

recordings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3/WMA discs, read the notes on

MP3/WMA Recordings on right.

1. Insert a disc and close the tray.

Audio CD: Audio CD menu appears on the TV

screen. Go to step 4.

About WMA (Windows Media Audio) Files

^ꢀAn WMA file is a Microsoft audio compression

technology.

^ꢀWMA(Windows Media Audio) offers double audio

compression of the MP3 format.

MP3/WMA disc: The MP3/WMA-JPEG choice menu

appears on the TV screen. Go to step 2.

MP3 WMA

MP3/WMA Disc compatibility with this player is

limited as follows:

JPEG

1. Sampling Frequency / only at 44.1kHz (MP3),

22.05 - 44.1kHz (WMA)

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

2. Use 3/4to select the MP3/WMA then press

ENTER.

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy-

CD Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

Program

MP3 WMA

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Clear All

OFF

00:00

3. Use 3/4 to select a folder then press ENTER.

A list of files in the folder appears.

4. Use 3/4to select a track then press PLAY or

ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TOP MENU to move to the next page.

Press DISC MENU to move to the previous page.

This DVD/VCR Receiver requires discs/recordings to

meet certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are auto-

matically set to these standards. There are many differ-

ent types of recordable disc formats (including CD-R

containing MP3/WMA files). Because this area of tech-

nology is still evolving, Toshiba cannot guarantee that

all recordable discs will produce optimal playback quali-

ty. The technical criteria set forth in this owner's manual

are meant only as a guide.

Program

MP3 WMA

TRACK01

FILE 1

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

Clear All

BYPASS

Clear All

OFF

0: 56: 18

STER.

00:00

Please be advised that you must obtain permission

from the applicable copyright owners to download

copyrighted content, including music files, in any

format, including the MP3 and WMA formats, prior

to the downloading thereof. Toshiba has no right to

grant and does not grant permission top download

any copyrighted content.

Audio CD Menu

MP3/WMA Menu

Tip

If you are in a File List and want to return to the Folder

List, use the 3/4to highlight and press ENTER to

return to the previous menu screen.

Microsoft, Windows Media, and the

Windows Logo are trademarks or

registered trademarks of Microsoft

Corporation in both the United States

and other countries

5. To stop playback at any other time, press

STOP.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3/WMA Disc Operation (Continued)

MP3

WMA

Pause

Repeat A-B

1 Press PAUSE/STEP during playback.

To repeat a sequence.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

1 During disc playback, press REPEAT A-B at your cho-

sen starting point.

The Repeat icon and “ * ” appears on the menu screen.

MP3

2 Press REPEAT A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

WMA

Moving to another Tracks

^ꢀPress SKIP (. or >) briefly during playback to

go to the next track or to return to the beginning of

the current track.

3 To exit the sequence and return to normal play, press

REPEAT A-B again.

The Repeat icon and “OFF” appears on the menu screen.

^ꢀPress SKIP (.) twice in quick succession to step

back to the previous track.

^ꢀOn Audio CDs, to go directly to any track, enter the

track number using the numbered buttons (0-9) dur-

ing playback.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

MP3

WMA

1 Press REW (m) or FWD (M) during playback.

The player will now go into SEARCH mode.

1 Press SOUND MODE to select “3D SUR”

during playback.

2 Each press of the REW (m) or FWD (M) button

will increase the speed of the search mX2, mX4,

mX8 (backward) or MX2, MX4, MX8 (for-

ward).

2 To turn off the 3D Surround effect,

press SOUND MODE again to select “BYPASS”.

Search speed and direction are indicated on the menu

screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

3 To exit SEARCH mode, press PLAY.

MP3

WMA

Random

1 Press RANDOM during playback or in Stop mode.

The unit automatically begins Random Playback and

“RAND.” appears on the menu screen.

2 To return to normal playback, press RANDOM repeat-

edly until “RAND.” disappears from the menu screen.

Note

RANDOM only works in File List of MP3 and WMA

discs.

MP3

WMA

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu

screen.

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appears on the menu screen.

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

JPEG File Operation

JPEG

Selecting other Files

Viewing JPEG Files on a Disc

Press SKIP (> or .) once while viewing a picture

This DVD/VCR Receiver can play discs with JPEG files.

Before playing JPEG files, read the notes on JPEG

Files on right.

to advance to the next file or to the previous file.

Still Picture

1 Press PAUSE/STEP during slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press PLAY or press

PAUSE/STEP again.

1. Insert a disc and close the tray.

The MP3/WMA-JPEG choice menu appears on the

TV screen.

MP3 WMA

JPEG

To flip the picture

Press 3/4while showing a picture to flip the

picture horizontally or a vertically.

2. Use 3/4to select the JPEG then press ENTER.

The JPEG menu appears on the TV screen.

To rotate picture

Press 1/2 while showing a picture to rotate the

picture clockwise or counter clockwise.

JPEG

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Notes on JPEG Files

Off

Slide Speed

^ꢀDepending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 3072x2048 pixels and burn another disc.

3. Use 3/4 to select a folder, and ENTER.

A list of files in the folder appears.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

Tip

If you are in a file list and want to return to the Folder

list, use the 34 buttons on the remote to highlight

^ꢀTotal number of files and folders on the disc should

be less than 650.

“

and press ENTER to return to the

”

^ꢀSome disc may be incompatible due to different

recording format or condition of disc.

previous menu screen.

ꢀ When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

4. If you want to view a particular file, use 3/4to

highlight the file and press ENTER or PLAY.

Viewing the file function starts.

While viewing a file, press RETURN to move to the

previous menu (JPEG menu).

Press TOP MENU to move to the next page.

Press DISC MENU to move to the previous page.

ꢀ If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

ꢀ File names without “.jpg” extension will not be able to

be read by this DVD/VCR Receiver, even though the

files are shown as JPEG image files in windows

explorer.

Folder1

JPEG

Picture1

Picture2

Picture3

Picture4

Picture5

Picture6

Picture7

Off

5/32

1024X768

Slide Speed

5/32

1024X768 Picture5.jpg

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Use 1/2 to highlight the Slide

Speed then use 3/4 to select the option you want to

use, and press ENTER.

5. To stop viewing at any other time, press STOP.

The JPEG menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

WMA

Programmed Playback

Programmed Playback with Audio CDs Programmed Playback with Video CD

and MP3/WMA Discs

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 22.

The Program function enables you to store your

favourite tracks from any disc in the player memory.

1. Insert Video CD and close the tray.

Program can contain 30 tracks.

2. Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

1. Press PROGRAM during playback or in the Stop

Program

VCD

mode to enter the Program Edit mode.

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

The

mark will appear to the right of the word Program

on the right side of the menu screen.

Clear All

Note

Press PROGRAM to exit the Program Edit mode;

Note

the

mark will disappear.

Press RETURN, PROGRAM or PLAY to exit the Program menu.

2. Select a track, then press ENTER to place the

selected track on the Program list.

3. Follow steps 2-6 of “Programmed Playback with

Audio CD and MP3/WMA disc” on left.

4. Press PLAY (N) or ENTER to start.

Playback begins in the order in which you programmed the

tracks. “PROGRAM” indicator will appear briefly on the TV

screen.

3. Repeat step 2 to place additional tracks on the

Program list.

Program

Playback stops after all of the tracks on the Program list

have played once.

MP3 WMA

Program

FILE 8

FILE 2

FILE 4

FILE 3

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

FILE 1

FILE 2

FILE 3

FILE 4

FILE 5

FILE 6

FILE 7

FILE 8

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

5. To resume normal playback from

programmed playback, press PROGRAM.

“NORMAL” indicator will appear briefly on the TV screen.

Clear All

OFF

Clear All

BYPASS

00:00

0: 56: 18

STER.

Repeat Programmed Tracks

^ꢀTo repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu screen.

^ꢀTo repeat all tracks on the program list, press

REPEAT a second time.

Audio CD menu

MP3/WMA menu

4. Press 2.

The programmed track you selected last is highlighted on

the program list.

The Repeat icon and “ALL” appears on the menu screen.

^ꢀTo cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

5. Use 3/4to select the track you want to start

playing.

Note

Press TOP MENU to move to the next page.

Press DISC MENU to move to the previous page.

For Video CD, the Repeat icon will only appear briefly on the

screen.

6. Press PLAY or ENTER to start.

Playback begins in the order in which you programmed the

tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

Erasing a Track from Program List

1 Press PROGRAM during playback (Audio CD and

MP3/WMA disc only) or stop to enter the Program

Edit mode.

The

mark will appear.

2 Press 2 to move to the Program list.

3 Use 3/4to select the track that you wish to erase

from the Program list.

7. To resume normal playback from programmed

playback, press PROGRAM.

4 Press CLEAR.

Select a track of CD (or MP3/WMA) list and then

The track will be erased from the Program list.

press ENTER or PLAY.

“PROG” indicator disappears from the display window.

Erasing the whole Program List

1 Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2 Use 3/4to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

Notes

ꢀ The programs are cleared when the disc is removed.

ꢀ The programs are cleared when another function mode

(VCR, radio etc.) is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speaker Setup

Adjust the following settings for the built-in 5.1 channel

surround decoder.

Distance

If you connected speakers to your DVD/VCR Receiver ,

setting the Distance lets the speakers know how far the

sound has to travel to reach your set listening point.

This allows the sound from each speaker to reach the

listener at the same time. (1~20 ft, 1 ft = 0.30 m)

Disc Audio

Disc Subtitle

Disc Menu

Rating

Front

Volume

Size

0 dB

Small

1 ft

Area Code

TV Aspect

Distance

Test

Note

Menu Language

You can not set the distance of subwoofer speaker.

Progressive Scan

Return

5.1 Speaker Setup

Others

Test

1. Select “5.1 Speaker Setup” using the 3/4

Press ENTER to test the signals of each speaker.

Adjust the volume to match the volume of test signals

memorized in the system.

^ꢀFront Left (L) → Centre → Front Right (R) →

Rear Right (R) → Rear Left (L) → Subwoofer

buttons on the setup menu.

2. While “5.1 Speaker Setup” is selected, press 2

button.

3. Press 2buttons to select the desired speaker.

4. Adjust options by using 341 2buttons.

Return

Press ENTER to return to the previous menu.

Speaker selection

Select a speaker that you want to adjust. ((Front speak-

ers (Left), Centre Speaker, Front speakers (Right), Rear

speakers (Left), Rear speakers (Right), or Subwoofer))

Note

Certain speaker settings are prohibited by the Dolby

Digital licensing agreement.

Volume

Press 1/ 2to adjust the output level of the selected

speaker. (-6dB ~ 6dB)

Size

Since the speaker settings are fixed, you cannot

change the settings.

^ꢀSubwoofer’s size is fixed “Large” and the other

speaker’s size are fixed “small”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operation

Presetting the Radio Stations

Listening to the Radio

You can preset 50 stations for FM and AM. Before tun-

ing, make sure that you have turned down the volume.

Preset radio stations in the DVD/VCR Receiver memory

first (see “Presetting Radio Stations” on the left).

1. Press FM/AM on the remote control or RADIO on

the front panel until the frequency band appears

on the display and TV screen.

1. Press FM/AM on the remote control or RADIO on

the front panel until the frequency band appears

on the display and TV screen.

The last received station is tuned in.

- - - - - - - RADIO - - - - - - - 1/10

2. Use 3/4on the remote control repeatedly to

AM 1720kHz

AM 600kHz

AM 1400kHz

AM 1000kHz

530kHz

select the preset station you want.

Each time you press the button, the DVD/VCR Receiver

tunes in one preset station at a time.

FM/AM

MEMORY/CLEAR

TUNING

3. Adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME (3or 4) on

the remote control repeatedly.

2. Use 3/4on the remote control or

CH/PRESET (

desired Station.

If you select a blank column, R-SKIP appears in the

display window.

) front panel to select the

To Clear the Stored Radio Stations

1. Press FM/AM on the remote control or on the

front panel until the frequency band appears on

the display and TV screen.

- - - - - - - RADIO - - - - - - - 2/10

FM 87 . 5MHz

FM 108 . 0MHz

FM 90 . 0MHz

FM 106 . 0MHz

FM 98 . 0MHz

- - - - - - - RADIO - - - - - - - 1/10

AM 1720kHz

AM 600kHz

530kHz

AM 1400kHz

AM 1000kHz

FM/AM

TUNING

MEMORY/CLEAR

FM/AM

MEMORY/CLEAR

TUNING

3. Press FM/AM on the remote control or front

panel to select the desired band.

2. Use 3/4on the remote control to select your

desired station.

4. Hold down TUNING (

) on the front panel or

TUNING (3/4) remote control for 1 or 2 seconds,

- - - - - - - RADIO - - - - - - - 2/10

and a station is searched for automatically.

FM 87 . 5MHz

FM 108 . 0MHz

FM 90 . 0MHz

FM 106 . 0MHz

FM 98 . 0MHz

5. Press MEMORY on the remote control.

The station is stored.

FM/AM

TUNING

MEMORY/CLEAR

3. Press CLEAR the remote control to clear the

stored radio station.

6. Repeat steps 2 to 5 to store other stations.

- - - - - - - RADIO - - - - - - - 6/10

FM 87 . 0MHz

FM/AM

TUNING

Note

While record or record pause mode, the CLEAR

function may not be operated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operation (Continued)

Tuning into a Station Manually

1. Press FM/AM on the remote control until the fre-

quency band appears on the display and TV

screen.

2. Press FM/AM on the remote control to select the

desired band.

3. Press TUNING (3/4) on the remote control to

tune in the desired station.

For your reference

Weak FM stations

“ST” may flash when a weak FM stereo signal is

received, select another station or realign the antenna.

To turn off the radio

Press POWER (I/1) to turn the DVD/VCR Receiver off

or select another function mode (DVD or VCR).

Tuning into a Station Automatically

Hold down TUNING (3/4) on the remote control for 1

or 2 seconds, and a station is searched for automatical-

ly.

Note

The search may not stop at a station with a very weak

signal.

Labeling Stations

1. Press 2 to move to the station name column.

- - - - - - - RADIO - - - - - - - 6/10

FM 87 . 5MHz

FM 108 . 0MHz

FM 90 . 0MHz

FM 106 . 0MHz

FM 98 . 0MHz

FM/AM

TUNING

MEMORY/CLEAR

2. Use the 3/4buttons to select the character then

use the 1/2buttons to shift to the next or previ-

ous character.

3. Press ENTER to confirm the station name.

4. Press ENTER on the remote control.

The station name is stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling Your TV with the Supplied Remote

The remote control can be compatible with various

brands of TV by setting their control codes. The TOSHI-

BA code has initially been set to control TOSHIBA TVs.

TV POWER

Setting TV Control Codes

INPUT

1. Press TV to set the remote control operating

your TV.

2. While holding down PROGRAM button, enter

the two digits of your TV’s brand code (listed on

page 41) using number buttons.

PROGRAM

3. Release PROGRAM.

By pressing

TV POWER

CH/TRK (4/3)

You can

Turn the TV on or off.

To select TV channels in the upper

or lower direction.

VOLUME

CH/TRK

VOLUME (4/3)

Adjust the volume of the TV.

INPUT

Switch the TV’s input source

between the TV and other input

sources.

Important

Some TV’s may not respond to all the operations

above, or may not be operated at all with this

remote control. In this case, operate your TV with

its own remote control.

Notes

^ꢀFor some brands, several control codes (brand

codes) are allocated. Try each of them until the but-

tons work on your TV.

^ꢀIf you replace the remote control’s batteries, set the

brand code again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling Your TV with the Supplied Remote (Continued)

Table of TV Brand Codes

Brand name of your TV

Toshiba

Bell & Howell

Carver

Brand Code

Brand name of your TV

Runco (NEC)

Samsung

Sanyo

Brand Code

11,12

Scotch

Celebrity

Citizen

Scott

Curtis Mathes

Dumont

Electro band

Emerson

Fisher

09, 12

Sears

01, 02, 09, 10, 11

Sharp

08, 13

Sony

09, 11

Soundesign

Supreme

Sylvania

Tandy

02, 07, 11

Gibraiter

Goldstar

Hallmark

Hitachi

Technics

Techwood

Teknika

TMK

07, 15

04, 10, 12

Infinity

JBL

JCB

Victor

JVC

Vidikron

Vidtech

Wards

LXI

01, 02, 09, 10, 11

Magnavox

Marantz

Megatron

Memorex

MGA

10, 11, 13

Zenith

06, 11

04, 09, 11

04, 11

Midland

Mitsubishi

Motorola

MTC

02, 07, 14

04, 11

NAD

01, 11

Nikko

Optimus

Optonica

Panasonic

Penney

Philco

07, 10, 15

01, 02, 07, 11, 12

Philips

Pioneer

Princeclub

Prism

Proscan

Proton

Pulser

Quasar

Radio Shack

RCA

07, 15

Realistic

09, 11, 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Solution

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The power is on, but the

DVD/VCR Receiver

does not work.

ꢀ The TV is not set to receive DVD/VCR

Receiver signal output.

ꢀ Select the appropriate video input mode

on the TV so the picture from the

DVD/VCR Receiver appears on the TV

screen.

No picture.

ꢀ Press the TV/VCR button on the remote

control repeatedly to choose VCR

mode. VCR MODE appears in the dis-

play window.

ꢀ TV/VCR mode for DVD/VCR Receiver is

set to TV MODE.

ꢀ The video cable is not connected

securely.

ꢀ Connect the video cable securely.

ꢀ The connected TV power is turned off.

ꢀ Turn on the TV.

No sound.

ꢀ The equipment connected with the

audio cable is not set to receive

DVD/VCR Receiver signal output.

ꢀ Select the correct input mode on the

audio receiver so you can listen to the

sound from the DVD/VCR Receiver.

ꢀ The audio cables are not connected

securely.

ꢀ Connect the audio cable securely.

ꢀ The power of the equipment connected

with the audio cable is turned off.

ꢀ Turn on the equipment connected with

the audio cable.

ꢀ The audio connecting cord is damaged.

ꢀ The disc is dirty.

ꢀ Replace it with new one.

ꢀ Clean the disc.

The playback picture is

poor.

ꢀ Tape heads are dirty.

ꢀ Clean video heads.

ꢀ Tape is a rental or was recorded on

another VCR.

ꢀ Use CH/TRK (v/V) for manual tracking

adjustment while tape is playing.

ꢀ No disc is inserted.

ꢀ No tape is inserted.

ꢀ Insert a disc or tape. (Check that the

disc or tape indicator in the display

window is lit.)

The DVD/VCR Receiver

does not start playback.

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type, color system, and Regional code.)

ꢀ The disc is placed upside down.

ꢀ

Place the disc with the playback side down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The Rating level is set.

ꢀ Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

ꢀ The remote control is not pointed at the

remote sensor of the DVD/VCR Receiver.

ꢀ Point the remote control at the remote

sensor of the DVD/VCR Receiver.

ꢀ The remote control is too far from the

DVD/VCR Receiver.

ꢀ Operate the remote control within 23 ft

(7 m).

ꢀ There is an obstacle in the path of the

remote control and the DVD/VCR

Receiver.

ꢀ Remove the obstacle.

ꢀ The batteries in the remote control are

exhausted.

ꢀ Replace the batteries with new ones.

ꢀ This remote control use the same

buttons for VCR and DVD functions

(ex. PLAY).

ꢀ When using a VCR, first press the VCR

button. When using a DVD, first press

the DVD button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Continued)

Cause

Solution

Symptom

ꢀ Incorrect mode (e.g. Remote control in

TV mode).

ꢀ Press DVD/CD, VCR or FM/AM to

select the correct mode on the remote

control.

INPUT, VOLUME (v/V)

and b/B/v/V buttons on

remote control cannot

operate.

ꢀ Those channels were deleted with the

CH. ADD/DEL option.

ꢀ Use CH. ADD/DEL to restore channels.

See “Channel Selection” on page 18.

Some channels are

skipped over when using

CH/TRK (v/V)

ꢀ Antenna or cables are loose.

ꢀ Tighten connections or replace cable.

Picture and sound of

broadcasting channel are

weak or missing.

ꢀ Wrong CHANNEL SOURCE option is

being used.

ꢀ Try all CHANNEL SOURCE options.

See “Channel Selection” on page 18 for

details.

ꢀ Camcorder is off.

ꢀ Turn camcorder on and operate

properly.

Camcorder image is not

shown.

ꢀ DVD/VCR Receiver INPUT SELECT is

not set to LINE1(L1) or LINE2(L2).

ꢀ Press INPUT to select LINE input chan-

nel (LINE1(L1) or LINE2(L2)).

Camcorder image via

A/V input to DVD/VCR

Receiver is not shown on

TV screen.

ꢀ Clock in DVD/VCR Receiver is not set

to correct time.

ꢀ Set clock to correct time. See “Setting

the Clock” on page 19.

Timer recording is not

possible.

ꢀ Timer has been programmed

incorrectly.

ꢀ Reprogram Timer. See “Timer

Recording” on pages 25 and 26.

ꢀ

indicator light does not appear after

programming timer.

ꢀ Reprogram Timer.

ꢀ TV is not Stereo-compatible.

ꢀ No action is possible.

Stereo Audio Record

and/or Playback is not

present.

ꢀ Broadcast program is not in stereo for-

mat.

ꢀ No action is possible.

ꢀ DVD/VCR Receiver A/V Out jacks are

not connected to TV A/V In jacks.

ꢀ Make A/V connections. Stereo is

available only via A/V output from

DVD/VCR Receiver.

ꢀ DVD/VCR Receiver Audio/Video Out is

ꢀ Select AUX or A/V source as TV input.

not selected for viewing at the TV.

ꢀ DVD/VCR Receiver BROADCAST

TYPE mode is set to SAP or MONO.

ꢀ Set BROADCAST TYPE mode to

STEREO. See “VCR Setup Menu

Option” on page 18.

ꢀ The plugs and jacks are dirty.

ꢀ Wipe them with a cloth slightly mois-

tened with alcohol.

Severe hum or noise is

heard.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The speakers and components are

connected poorly.

ꢀ Connect the speakers and components

securely.

ꢀ The DVD/VCR Receiver is located too

close to the TV.

ꢀ Move your TV away from the audio

components.

ꢀ The antenna is positioned or connected ꢀ Connect the antenna securely.

poorly.

Radio stations cannot be

tuned in.

ꢀ Adjust the antennas and connect an

external antenna if necessary.

ꢀ The signal strength of the stations is too ꢀ Tune in the station manually.

weak (when tuning in with automatic

tuning).

ꢀ No stations have been preset or preset

stations have been cleared (when

tuning by scanning preset stations).

ꢀ Preset the stations (page 38).

No sound from DIGITAL ꢀ DVD/VCR Receiver source is not set to

AUDIO IN (OPTICAL).

DIGITAL AUDIO IN (OPTICAL).

ꢀ Select OPTICAL by pressing AUX once.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 21).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Amharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faeroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Area Code List

Enter the appropriate code number for the initial setting “Area Code List” (See page 23).

Code Area

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Australia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

AC 120V, 60 Hz

Power consumption

Dimensions (approx.)

Mass (approx.)

Operating temperature

Operating humidity

Signal system

110 W

430 X 81 X 360 mm (17 x 3.2 x 14.2 inches) (w x h x d)

7.2 kg (15.8 lbs)

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

NTSC

Inputs

ANTENNA IN

VCR VIDEO IN

VCR AUDIO IN

Antenna or CATV input, 75 ohms

1 V (p-p) 75 ohms, sync negative, RCA jack x 2

-6.0 dBm more than 47 kohms, RCA jack (L, R) x 2

FM antenna input, 75 ohms

AM antenna input, 300 ohms

Optical connector x 1

FM ANTENNA IN

AM ANTENNA IN

DIGITAL AUDIO IN

Outputs

VIDEO OUT

1 V (p-p) 75 ohms, sync negative

S-VIDEO OUT

(Y) 1.0 V (p-p), 75 ohms, sync negative, Mini DIN 4-pin x 1

COMPONENT VIDEO OUT

(PROGRESSIVE SCAN)

Audio output (analog audio)

RF OUT

(Y) 1.0 V (p-p), 75 ohms, sync negative, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2

2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1

Channel 3 or 4 (Adjustable)

VCR Specifications

Head system

Timer

Tape speed

4 head helical scan azimuth system

12-hour display type with AM, PM

SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec

12.7 mm

Tape width

Maximum recording time

Rewind time

SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)

About 180 seconds (T-120)

Antenna

75 ohms (VHF/UHF)

Channel coverage

Frequency range

Signal-to-noise ratio

Dynamic range

Channel separation

VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)

20Hz to 20kHz

More than 43dB

More than 85 dB (AUDIO OUT jacks)

More than 55 dB (AUDIO OUT jacks)

DVD Specifications

Laser system

Frequency response

Signal-to-noise ratio

Harmonic distortion

Dynamic range

Semiconductor laser, wavelength 650 nm

DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz

More than 80 dB (AUDIO OUT jacks)

Less than 0.4%

More than 80 dB (AUDIO OUT jacks)

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications (Continued)

FM Tuner

Tuning Range

87.5 - 108.0 MHz

Intermediate Frequency

10.7 MHz

AM Tuner

Tuning Range

Intermediate Frequency

530 - 1,720 kHz

450 kHz

Amplifier

Stereo mode

70W + 70W (6Ω at 1 kHz, THD 10 %)

Surround mode

Front: 70W + 70W (6Ω at 1 kHz, THD 10 %)

Center*: 70W (6Ω at 1 kHz, THD 10 %)

Surround*: 70W + 70W (6Ω at 1 kHz, THD 10 %)

Subwoofer*: 150W (4Ω at 30 Hz, THD 10 %)

*Depending on the sound mode settings and the source, there may be no sound output.

Inputs

LINE 1, LINE 2, OPTICAL IN

Speakers

Satellite Speaker

2 Way 2 Speaker

6 Ω

Center Speaker

2 Way 2 Speaker

6 Ω

Passive Subwoofer

1 Way 1 Speaker

4 Ω

Type

Impedance

Frequency Response

Sound Pressure Level

Rated Input Power

110 - 40,000 Hz

83 dB/W (1m)

90 W

110 - 40,000 Hz

83 dB/W (1m)

90 W

40 - 1,500 Hz

82 dB/W (1m)

150 W

Max. Input Power

180 W

300 W

Net Dimensions (W x H x D)

Net Weight

120 x 170 x 107 mm

0.94 kg

120 x 252 x 107 mm

1.07 kg

200 x 400 x 381 mm

7.0 kg

Accessories:

Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Ferrite core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . .1

Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

^ꢀThis model complies with the above specifications.

^ꢀDesigns and specifications are subject to change without notice.

^ꢀThis model may not be compatible with features and/or specifications that may be added in the future.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby

Laboratories.

“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited United States Warranty

for DVD/VCR Home Theater System

Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers

in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER

OR ANY PERSON RECEIVING THIS DVD/VCR HOME THEATER SYSTEM AS A GIFT FROM THE ORIGINAL

CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.

DVD/VCR HOME THEATER SYSTEMS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE

U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.

DVD/VCR HOME THEATER SYSTEMS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,

WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE

WARRANTIES.

Limited Ninety (90) Day Warranty on Labor

TACP warrants this DVD/VCR Home Theater System

and its parts against defects in materials or workman-

ship for a period of ninety (90) days after the date of

original retail purchase. DURING THIS PERIOD, TACP

WILL, AT TACP'S OPTION, REPAIR OR REPLACE A

DEFECTIVE PART WITH A NEW OR REFURBISHED

PART WITHOUT CHARGE TO YOU FOR PARTS OR

LABOR.

Owner's Manual and Product Registration Card

Read this owner’s manual thoroughly before operating

this DVD/VCR Home Theater System.

Complete and mail the enclosed product registration

card or register your DVD/VCR Home Theater System

online at www.tacp.toshiba.com/service as soon as pos-

sible. By registering your DVD/VCR Home Theater

System you will enable TACP to bring you new products

specifically designed to meet your needs and help us to

contact you in the unlikely event a safety notification is

required under the U.S. Consumer Product Safety Act.

Failure to complete and return the product registration

card does not diminish your warranty rights.

Limited One (1) Year Warranty on Parts

TACP further warrants the parts in this DVD/VCR Home

Theater System against defects in materials or work-

manship for a period of one (1) year after the date of

original retail purchase. DURING THIS PERIOD, TACP

WILL, AT TACP'S OPTION, REPAIR OR REPLACE A

DEFECTIVE PART WITH A NEW OR REFURBISHED

PART WITHOUT CHARGE TO YOU FOR THE PART,

PROVIDED THAT IF A DEFECTIVE PART IS

REPAIRED OR REPLACED AFTER NINETY (90) DAYS

AFTER THE DATE OF ORIGINAL RETAIL PURCHASE,

YOU MUST PAY ALL LABOR CHARGES IN CONNEC-

TION WITH THE REPAIR OR REPLACEMENT

THEREOF.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE

FOLLOWING CONDITIONS:

(1) You must retain your original bill of sale or provide

other proof of purchase.

(2) All warranty servicing of this DVD/VCR Home

Theater System must be performed by an

Authorized TACP Service Station.

(3) The warranties from TACP are effective only if this

DVD/VCR Home Theater System is purchased and

operated in the Continental U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup,

adjustment of customer controls and installation or

repair of antenna systems are not covered by this

warranty. Reception problems caused by inadequate

antenna systems are your responsibility.

*Rental Units

The warranty for DVD/VCR Home Theater System

rental units begins on the date of the first rental or thirty

(30) days after the date of shipment to the rental firm,

whichever comes first.

*Limited Warranty for Commercial Units

(5) Warranties extend only to defects in materials or

workmanship as limited above, and do not extend to

any DVD/VCR Home Theater System or parts that

have been lost or discarded by you or to damage to

the DVD/VCR Home Theater System or parts

caused by fires, misuse, accident, Acts of God (such

as lightning or fluctuations in electric power),

improper installation, improper maintenance, or use

in violation of instructions furnished by TACP; use or

malfunction through simultaneous use of this

DVD/VCR Home Theater System and connected

equipment; or to units that have been modified or

had the serial number removed, altered, defaced, or

rendered illegible.

TACP warrants DVD/VCR Home Theater Systems that

are sold and used for commercial purposes as follows:

all parts are warranted against defects in materials or

workmanship for a period of ninety (90) days after the

date of original retail purchase. DURING THIS PERIOD,

TACP WILL, AT TACP'S OPTION, REPAIR OR

REPLACE A DEFECTIVE PART WITH A NEW OR

REFURBISHED PART WITHOUT CHARGE TO YOU.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Obtain Warranty Service

THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE IN THE

U.S.A. SOME STATES OF THE U.S.A. DO NOT

ALLOW LIMITATIONS ON THE DURATION OF AN

IMPLIED WARRANTY, WHEN AN ACTION MAY BE

BROUGHT, OR THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES.

THEREFORE, THE ABOVE PROVISIONS MAY NOT

APPLY TO YOU UNDER SUCH CIRCUMSTANCES.

If, after following all of the operating instructions in this

manual and reviewing the section entitled

"Troubleshooting," you find that service is needed:

(1) To find the nearest TACP Authorized Service

Station, visit TACP's website at

www.tacp.toshiba.com/service or contact TACP's

Consumer Solution Center toll free at 1-800-631-

3811.

(2) You must present your original bill of sale or other

proof of purchase to the TACP Authorized Service

Station. You must deliver the entire DVD/VCR

Home Theater System to a TACP Authorized

Service Station. You must pay for all transportation

and insurance charges for the DVD/VCR Home

Theater System to and from the TACP Authorized

Service Station.

For additional information, visit TACP's website:

www.tacp.toshiba.com

ALL WARRANTIES IMPLIED BY THE LAW OF ANY

STATE OF THE U.S.A., INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE EXPRESSLY

LIMITED TO THE DURATION OF THE LIMITED WAR-

RANTIES SET FORTH ABOVE. WITH THE EXCEP-

TION OF ANY WARRANTIES IMPLIED BY THE LAW

OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED,

THE FOREGOING WARRANTY IS EXCLUSIVE AND

IN LIEU OF ALL OTHER WARRANTIES, GUARAN-

TEES, AGREEMENTS, AND SIMILAR OBLIGATIONS

OF TACP WITH RESPECT TO THE REPAIR OR

REPLACEMENT OF ANY PARTS.

IN NO EVENT SHALL TACP BE LIABLE FOR CONSE-

QUENTIAL OR INCIDENTAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, LOST PROFITS, BUSINESS

INTERRUPTION, OR MODIFICATION OR ERASURE

OF RECORDED DATA CAUSED BY USE, MISUSE OR

INABILITY TO USE THIS DVD/VCR HOME THEATER

SYSTEM).

No person, agent, distributor, dealer or company is

authorized to change, modify or extend the terms of

these warranties in any manner whatsoever. The time

within which an action must be commenced to enforce

any obligation of TACP arising under the warranty or

under any statute, or law of the United States or any

state thereof, is hereby limited to ninety (90) days from

the date you discover or should have discovered, the

defect. This limitation does not apply to implied war-

ranties arising under the law of any state of the U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

ColorStream and ColorStream Pro

are registered trademarks of Toshiba

America Consumer Products, L.L.C.

P/NO : 3834RH0074C

Printed in Indonesia.

Download from Www.Somanuals.com. All Manuals Search And Download.

Taylor Thermometer 1446 User Manual
Telex Dollhouse sc 600 User Manual
Thermador Range PD30 User Manual
Transcend Information Network Card StoreJetTM OTG User Manual
Triarch Indoor Furnishings 34115 User Manual
Univex Flat Panel Television HD65W40 User Manual
Vermont Casting Indoor Fireplace SR18SHK User Manual
Viking Ventilation Hood DIPR User Manual
VuPoint Solutions Scanner PDS ST410A VP User Manual
Wayne Septic System 332200 001 User Manual