Toshiba Flat Panel Television 65L7300U User Manual

Integrated High Definition LED  
Television User’s Guide:  
32L4300U / 39L4300U / 50L4300U / 58L4300U  
50L7300U / 58L7300U / 65L7300U  
If you need assistance:  
Toshiba's Support Web site support.toshiba.com  
For more information, see “Troubleshooting” on page 160 in this guide.  
Owner's Record  
The model number and serial number are on the back and side of your television.  
Record these numbers, whenever you communicate with your Toshiba dealer about  
this Television.  
Model name:  
Serial number:  
Register your Toshiba Television at register.toshiba.com  
Note: To display a High Definition  
picture, the TV must be receiving a  
High Definition signal (such as an over-  
the-air High Definition TV broadcast, a  
High Definition digital cable program,  
or a High Definition digital satellite  
program). For details, contact your TV  
antenna installer, cable provider, or  
satellite provider  
GMA300019013  
6/13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Dear Customer,  
Important Safety Instructions  
Thank you for purchasing this Toshiba LED TV.  
This document will help you use the many exciting  
features of your new LED TV. Before operating your  
LED TV, carefully read this manual completely.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
Safety Precautions  
6) Clean only with dry cloth.  
WARNING: TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR MOISTURE.  
7) Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
WARNING  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN.  
9) Do not defeat the safety  
purpose of the polarized  
or grounding type plug. A  
polarized plug has two blades  
with one wider than the other. A  
Wide blade  
WARNING: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
grounding type plug has two blades and a third  
grounding prong. The wide blade or the third  
prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
The lightning flash with arrowhead  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltage” within the product’s  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
The exclamation point within an  
equilateral triangle is intended to  
alert the user to the presence of  
important operating and maintenance  
(servicing) instructions in the literature  
accompanying the appliance.  
10) Protect the power cord from being walked on  
or pinched, particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11) Only use attachments/accessories specified  
by the manufacturer.  
12) Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer, or sold  
with the apparatus. When a cart  
is used, use caution when moving  
the cart/apparatus combination to  
avoid injury from tip-over.  
WARNING  
To prevent injury, this apparatus must be securely  
attached to the floor/wall in accordance with the  
installation instructions. See item 26) on page 4.  
13) Unplug this apparatus during lightning storms  
WARNING: If you decide to wall mount this  
television, always use a mounting bracket that has  
been Listed by an independent laboratory (such as  
UL, CSA, ETL) and is appropriate for the size and  
weight of this television. The use of inappropriate or  
non-Listed mounting brackets could result in serious  
bodily injury and/or property damage. See To Display  
or when unused for long periods of time.  
14) Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
NOTE TO CATV INSTALLERS  
This is a reminder to call the CATV system installer’s  
attention to Article 820-40 of the U.S. NEC, which  
provides guidelines for proper grounding and, in  
particular, specifies that the cable ground shall be  
connected to the grounding system of the building,  
as close to the point of cable entry as practical. For  
additional antenna grounding information, see items  
33) and 34) on page 5.  
Additional Safety Precautions  
14a) CAUTION: If the TV is dropped and the cabinet  
or enclosure surface has been damaged or the  
TV does not operate normally, take the following  
precautions:  
• ALWAYS turn off the TV and unplug the power  
cord to avoid possible electric shock or fire.  
• NEVER allow your body to come in contact with  
any broken glass or liquid from the damaged  
television. The LCD panel inside the TV contains  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
glass and a toxic liquid. If the liquid comes in  
contact with your mouth or eyes, or your skin  
is cut by broken glass, rinse the affected area  
thoroughly with water and contact your doctor  
immediately.  
• ALWAYS contact a service technician to inspect  
the TV any time it has been damaged or  
dropped.  
24) When selecting a location for the TV,  
• NEVER allow any part of the TV to hang over  
the edge of the supporting furniture,  
• NEVER place the TV on tall furniture (for  
example, entertainment centers or bookcases)  
without anchoring both the furniture and the TV  
to a suitable support,  
• Never place cloth or other material between the  
TV and the supporting furniture.  
15) CAUTION:  
• NEVER allow children to climb on the TV.  
To reduce the risk of electric shock, do not  
use the polarized plug with an extension cord,  
receptacle, or other outlet unless the blades  
can be inserted completely to prevent blade  
exposure.  
25) To avoid damage to this product, never place or  
store the TV in direct sunlight; hot, humid areas;  
or areas subject to excessive dust or vibration.  
26) Always place the TV on the floor or a sturdy, level,  
stable surface that can support the weight of the  
unit. Secure the TV using one of the following  
methods:  
To prevent electric shock, match wide blade of  
plug to wide slot; fully insert.  
16) CAUTION:  
• Do not let children swallow any small parts  
included on or with the product or play with the  
plastic bag. Keep the small parts and the plastic  
bag out of the reach of children.  
(1) Secure the TV with a mounting screw  
(Recommended.)  
• Place the TV on a sturdy surface that has a  
sufficient thickness and screw the unit on the  
surface securely by using the mounting screw  
and the fall-prevention screw hole.  
17) CAUTION:  
• Do not let water or other liquids come into  
contact with the product, as it may result in  
damage.  
Mounting screw  
18) WARNING:  
TV Back  
To prevent the spread of fire, keep candles or  
other open flames away from this product at all  
times.  
• Keep the product away from direct sunlight, fire  
or a heat source such as a heater. This may  
reduce the product lifetime or result in fire.  
Screw hole  
(2) Secure the TV with a sturdy strap to a wall  
stud, pillar, or other immovable structure. When  
connecting the strap:  
• attach the strap to the TV using the hooks on  
the back of the TV, the clips on the pedestal, or  
the hole in the base of the pedestal as available.  
• make sure the strap is tight, secure, and parallel  
to the floor.  
Installation, Care, and Service  
Installation  
Sturdy strap (as short as possible)  
Follow these recommendations and precautions and  
heed all warnings when installing your TV:  
Hook  
7”  
min.  
19)  
WARNING: NEVER expose batteries  
to excessive heat such as sunshine,  
fire, or the like.  
TV Side  
TV Top  
27) The apparatus shall not be exposed to dripping or  
splashing, and that no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
20) ALWAYS plug the product into an outlet that is  
located in such a manner that it can be easily  
unplugged in case the product requires service.  
28) Never block or cover the slots or openings in the  
TV cabinet back, bottom, and sides. Never place  
the TV:  
21) NEVER route the product’s power cord inside a  
wall or similar enclosed area.  
22) Never modify this equipment. Changes or  
modifications may void: a) the warranty, and b)  
the user’s authority to operate this equipment  
under the rules of the Federal Communications  
Commission.  
• on a bed, sofa, rug, or similar surface;  
• too close to drapes, curtains, or walls; or  
• in a confined space such as a bookcase,  
built-in cabinet, or any other place with poor  
ventilation.  
23)  
DANGER: RISK OF  
SERIOUS PERSONAL  
INJURY, DEATH, OR  
29) Always leave a space of at least 4 (four) inches  
around the TV. The slots and openings are  
provided to protect the TV from overheating and  
to help maintain reliable operation of the TV.  
EQUIPMENT DAMAGE  
Never place the TV on an unstable  
cart, stand, or table. The TV may fall, causing  
serious personal injury, death, or serious damage  
to the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
30) Never allow anything to rest on or roll over the  
power cord, and never place the TV where the  
power cord is subject to wear or abuse.  
• Always unplug the TV before cleaning. Gently  
wipe the display panel surface (the TV screen)  
using a dry, soft cloth (cotton, flannel, etc.).  
A hard cloth may damage the surface of the  
panel. Avoid contact with alcohol, thinner,  
benzene, acidic or alkaline solvent cleaners,  
abrasive cleaners, or chemical cloths, which  
may damage the surface. Never spray volatile  
compounds such as insecticide on the cabinet.  
Such products may damage or discolor the  
cabinet.  
31) Never overload wall outlets and extension cords.  
32) Always operate this equipment from a 120V AC,  
60 Hz power source.  
33) Always make sure the antenna system is properly  
grounded to provide adequate protection against  
voltage surges and built-up static charges (see  
Section 810 of the National Electric Code).  
37) Never hit, press, or place anything on the back  
cover. These actions will damage internal parts.  
Antenna lead-in wire  
38)  
Antenna discharge unit  
(NEC Section 810-20)  
Ground clamp  
WARNING:  
RISK OF ELECTRIC SHOCK!  
Grounding conductors  
(NEC Section 810-21)  
Never spill liquids or push objects of any kind into  
the TV cabinet slots.  
Electric service equipment  
39) During a lightening storm, do not touch the  
connecting cables or product.  
Power service grounding  
electrode system (NEC Art 250 Part-H)  
Ground clamps  
40) For added protection of your TV from lightning and  
power surges, always unplug the power cord and  
disconnect the antenna from the TV if you leave  
the TV unattended or unused for long periods of  
time.  
34)  
DANGER: RISK OF SERIOUS  
PERSONAL INJURY OR DEATH!  
• When installing a rooftop antenna, use extreme  
care to make sure you are never in a position  
where your body (or any item you are in contact  
with, such as a ladder or screwdriver) can  
accidentally touch overhead power lines.  
Never locate the antenna near overhead power  
lines or other electrical circuits.  
• Never attempt to install any of the following  
during lightning activity: a) an antenna system;  
or b) cables, wires, or any home theater  
component connected to an antenna or phone  
system.  
41) Always unplug the TV to completely disconnect  
from mains power. When the TV is turned off  
using the on/off switch, it is not completely  
disconnected from power and a minute amount of  
current is still consumed.  
42) During normal use, the TV may make occasional  
snapping or popping sounds. This is normal,  
especially when the unit is being turned on or off.  
If these sounds become frequent or continuous,  
unplug the power cord and contact a Toshiba  
Authorized Service Provider.  
Care  
43)  
WARNING: RISK OF SERIOUS  
PERSONAL INJURY OR EQUIPMENT  
DAMAGE!  
For better performance and safer operation of your  
TOSHIBA TV, follow these recommendations and  
precautions:  
Never strike the screen with a sharp or heavy  
object.  
35) If you use the TV in a room whose temperature is  
32° F (0° C) or below, the picture brightness may  
vary until the LCD warms up. This is not a sign of  
malfunction.  
44)  
• The LCD screen of this product can be damaged  
by ultraviolet radiation from the sun. When  
selecting a location for the television, avoid  
locations where the screen may be exposed to  
direct sunlight, such as in front of a window.  
• Never touch, press, or place anything on the  
LCD screen. These actions will damage the  
LCD screen. If you need to clean the LCD  
screen follow the instructions (in item 36) on  
page 5.  
36)  
WARNING: RISK OF SERIOUS  
PERSONAL INJURY OR EQUIPMENT  
DAMAGE!  
• Never use chemicals (such as air fresheners,  
cleaning agents, etc.) on or near the TV  
pedestal. Studies indicate that plastics may  
weaken and crack over time from the combined  
effects of chemical agents and mechanical  
stress (such as the weight of the TV). Failure to  
follow these instructions could result in serious  
injury and/or permanent damage to TV and TV  
pedestal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6
4) Always use the screws supplied or recommended  
by the wall mount manufacturer.  
Service  
45)  
5) Follow the instructions provided with your wall  
bracket. Before proceeding, make sure the  
appropriate bracket(s) are attached to the wall and  
the back of the TV as described in the instructions  
provided with the wall bracket.  
6) After attaching the appropriate bracket(s) to the  
wall and the back of the TV, remove the pedestal  
stand from the TV, as described below.  
WARNING:  
RISK OF ELECTRIC SHOCK!  
Never attempt to service the TV yourself. Opening  
and removing the covers may expose you to  
dangerous voltage or other hazards. Failure  
to follow this WARNING may result in death or  
serious injury. Refer all servicing not specified  
in this manual to a Toshiba Authorized Service  
Provider.  
7) VESA Mounting Pattern  
TV Size  
Hole Pattern (HxV)  
200x200 mm  
200x200 mm  
400x400 mm  
400x400 mm  
400x200 mm  
400x400 mm  
400x400 mm  
Screw Size  
M6  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
46) If you have the TV serviced:  
• Ask the service technician to use only  
replacement parts specified by the manufacturer.  
• Upon completion of service, ask the service  
technician to perform routine safety checks  
to determine that the TV is in safe operating  
condition.  
M6  
M8  
M8  
M6  
M6  
M6  
Choosing a location for your LED TV  
(unit in mm)  
To Display your LED TV on the included Pedestal  
Stand:  
Removing the Pedestal Stand  
Observe the following safety precautions:  
1) Read and follow the pedestal assembly  
instructions included with the pedestal.  
1) Carefully lay the front of the unit face down on a  
flat, cushioned surface such as a quilt or blanket.  
Leave the stand protruding over the edge of the  
surface.  
CAUTION: Before beginning pedestal assembly,  
carefully lay the front of the LCD Panel face down  
on a flat, cushioned surface such as a quilt or  
blanket. Leave the bottom of the unit protruding  
over the edge of the surface and assemble the  
pedestal as indicated below.  
Note: Extreme care should always be used when  
removing the pedestal stand to avoid damage to  
the LCD panel.  
2) Remove the screws shown in the below diagram.  
This will allow removal of the pedestal stand.  
Note: Extreme care should always be used when  
attaching the pedestal stand to avoid damage to  
the LCD panel.  
3) Once you have removed all of the screws holding  
the pedestal stand in place, remove the pedestal  
stand from the TV.  
2) Place the TV on a sturdy, level surface that can  
support the weight of the TV.  
L7300U Series  
3) Be sure to secure the TV to a wall, pillar, surface,  
or other immovable structure see item 26) page 4  
for additional details.  
50"/ 58"/ 65" VESA Mounting Pattern  
To Display your LED TV using a Wall Bracket:  
If you decide to wall mount your LED TV, always use  
a wall bracket Listed by an independent laboratory  
(such as UL, CSA, ETL) that is appropriate for the  
size and weight of the TV (see page 2):  
1) CAUTION: Two people are required for  
installation.  
2) Unplug and remove any cables and/or other  
component connectors from the rear of the TV.  
3) Remove the screws of the VESA Mounting  
Pattern show in the table if applicable.  
Four stand screws  
One clip  
CAUTION: Do not use the screws removed from  
the back cover to attach the wall mount bracket to  
the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
L4300U Series  
FCC Declaration of Conformity  
Compliance Statement (Part 15):  
32"/ 39" VESA Mounting Pattern  
Toshiba television models 32L4300U, 39L4300U,  
50L4300U, 58L4300U, 50L7300U, 58L7300U and  
65L7300U, comply with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired operation.  
The party responsible for compliance to these rules is:  
Toshiba America Information Systems, Inc. 9740 Irvine  
Blvd., Irvine, CA 92618. Phone: 800-631-3811  
Note: This equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by removing and applying  
power to the equipment, the user is encouraged to  
try to correct the interference by one of the following  
measures:  
Two stand screws  
One clip  
50"/ 58" VESA Mounting Pattern  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
Four stand screws  
One clip  
CAUTION: Always place the TV on the floor or a  
sturdy, level, stable surface that can support the  
weight of the unit. Secure the TV as described in  
item 26) of the Important Safety Instructions in  
this document.  
Caution: Changes or modifications to this equipment  
not expressly approved by Toshiba could void the  
user's authority to operate this equipment.  
FCC Caution  
To assure continued compliance, follow the attached  
installation instructions. Any changes or modifications  
not expressly approved by Toshiba America  
Wireless Radio  
Information Systems, Inc. could void the user’s  
authority to operate this device. Service Center or an  
experienced radio/TV technician for help.  
For product available in the USA/Canada market,  
only channel 1–11 can be operated. Selection of other  
channels is not possible. The device could automatically  
discontinue transmission in case of absence of information  
to transmit, or operational failure. Note that this is not  
intended to prohibit transmission of control or signaling  
information or the use of repetitive codes where required  
by the technology. If this device is going to be operated in  
5.15–5.25GHz frequency range, then it is restricted to an  
indoor environment only.  
Important: Any changes or modifications not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate  
this equipment. This device and its antenna(s) must  
not be co-located or operating in conjunction with any  
other antenna or transmitter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
FCC Radiation Exposure Statement: This equipment  
complies with FCC radiation exposure limits set forth  
for an uncontrolled environment. This equipment  
should be installed and operated with minimum  
distance 20cm between the radiator & your body.  
Important notes about your TV  
The following symptoms are technical limitations of  
LCD Display technology and are not an indication of  
malfunction; therefore, Toshiba is not responsible for  
perceived issues resulting from these symptoms.  
Wireless Radio  
1) An afterimage (ghost) may appear on the screen  
if a fixed, non-moving image appears for a long  
period of time. The afterimage is not permanent  
and will disappear in a short period of time.  
For product available in the USA/Canada market, only  
channel 1–11 can be operated. Selection of other channels  
is not possible.  
The device could automatically discontinue transmission  
in case of absence of information to transmit, or  
operational failure. Note that this is not intended to prohibit  
transmission of control or signaling information or the use  
of repetitive codes where required by the technology.  
2) The LCD panel contained in this TV is  
manufactured using an extremely high level  
of precision technology; however, there may  
be an occasional pixel (dot of light) that does  
not operate properly (does not light, remains  
constantly lit, etc.). This is a structural property of  
LCD technology, is not a sign of malfunction, and  
is not covered under your warranty. Such pixels  
are not visible when the picture is viewed from a  
normal viewing distance.  
Important: Any changes or modifications not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate  
this equipment.  
IMPORTANT NOTE:  
IC Radiation Exposure Statement: This equipment  
complies with IC RSS-102 radiation exposure limits  
set forth for an uncontrolled environment. This  
equipment should be installed and operated with  
minimum distance 20cm between the radiator & your  
body.  
Note: Interactive video games that involve shooting a  
“gun” type of joystick at an on-screen target may not  
work with this TV.  
Trademark Information  
• AutoView, Cinema Series, ClearScan, ColorMaster,  
ColorStream, CQ Engine, DynaLight, GameTimer  
and Native Mode are trademarks or registered  
trademarks of Toshiba America Information  
Systems, Inc.  
• ActiveX is a registered trademark of the Microsoft  
Corporation.  
• Android is a trademark of Google Inc.  
ENERGY STAR® User Information  
ENERGY STAR User Information Statement: the factory  
default settings of this television meet ENERGY STAR®  
requirements. Changing Picture Settings may increase  
energy consumption, possibly beyond the limits required  
for ENERGY STAR qualification.  
To ensure your television is operating at optimal energy  
efficiency, select [Home] mode during initial activation.  
To return to [Home] mode settings, select [Home] under  
the Installation Tab of the TV Menu.. [AutoView] mode is  
recommended for normal home use.  
• Manufactured under license from  
Audyssey Laboratories.  
U.S. and foreign patents pending.  
Audyssey Premium Television™ is a  
trademark of Audyssey Laboratories.  
Audyssey Premium Television™ is a  
suite of technologies that remove the  
acoustical problems caused by small  
speakers and drivers.  
Working together these technologies  
deliver a better translation of the  
audio content and make the television  
experience sound closer to the original.  
ENERGY STAR® qualified TV.  
Products that earn the ENERGY STAR  
prevent green house gas emissions by  
meeting strict guidelines set by the  
U.S. Environmental Protection Agency.  
ENERGY STAR and the ENERGY STAR  
mark are registered U.S. marks.  
• Blu-ray Disc™, Blu-ray™, and the logos are  
trademarks of the Blu-ray Disc Association  
• CinemaNow is a registered trademark of BBY  
Solutions, Inc.  
• DivX®, DivX Certified®, DivX Plus® HD and  
associated logos are trademarks of Rovi  
Corporation or its subsidiaries and are used under  
license.  
• Manufactured under license from Dolby  
Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9
• ENERGY STAR and the ENERGY STAR mark are  
registered U.S. marks.  
BE OBTAINED FROM MPEG LA, LLC. SEE  
HTTP://WWW.MPEGLA.COM  
• THIS PRODUCT IS LICENSED UNDER THE  
• The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI logo are  
trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other  
countries.  
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE  
FOR THE PERSONAL AND NON-COMMERCIAL  
USE OF A CONSUMER FOR (i) ENCODING  
VIDEO IN COMPLIANCE WITH THE MPEG-  
4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/  
OR (ii) DECODING MPEG-4 VIDEO THAT WAS  
ENCODED BY A CONSUMER ENGAGED IN A  
PERSONAL AND NON-COMMERCIAL ACTIVITY  
AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED BY MPEG LA TO PROVIDE  
MPEG-4 VIDEO. NO LICENSE IS GRANTED  
OR SHALL BE IMPLIED FOR ANY OTHER USE.  
ADDITIONAL INFORMATION INCLUDING THAT  
RELATING TO PROMOTIONAL,INTERNAL AND  
COMMERCIAL USES AND LICENSING MAY BE  
OBTAINED FROM MPEG powered LA,LLC. SEE  
HTTP:// WWW.MPEGLA.COM  
• Intel and the Intel logo are trademarks of Intel  
Corporation in the U.S. and/or other countries.  
• iTunes Store is a trademark of Apple Inc., registered  
in the U.S. and other countries.  
• MPEG Layer-3 audio coding technology licensed  
from Fraunhofer IIS and Thomson.  
• Netflix is a registered trademark of Netflix, Inc.  
• Skype, the Skype logo and the "S" logo are  
trademarks of Skype and are used with the  
permission of Skype  
• VUDU, Vudu Apps, and Vudu HD Movies are  
trademarks and registered trademarks of VUDU,  
Inc  
Copyright  
• WiFi is a registered mark of the Wi-Fi Alliance.  
This guide is copyrighted by Toshiba America Information  
Systems, Inc. with all rights reserved. Under the copyright  
laws, this guide cannot be reproduced in any form without  
the prior written permission of Toshiba. No patent liability  
is assumed, however, with respect to the use of the  
information contained herein.  
• Designed with UEI Technology™. Under License  
from Universal Electronics Inc.  
Portions © UEI 2000-2012.  
• All other brand and product names are trademarks  
or registered trademarks of their respective  
companies.  
©2013 by Toshiba America Information Systems, Inc. All  
rights reserved.  
• THIS PRODUCT IS LICENSED UNDER THE  
AVC PATENT PORTFOLIO LICENSE FOR THE  
PERSONAL AND NONCOMMERCIAL USE  
OF A CONSUMER TO (i) ENCODE VIDEO IN  
COMPLIANCE WITH THE AVC STANDARD  
(“AVC VIDEO”) AND/OR (ii) DECODE AVC  
VIDEO THAT WAS ENCODED BY A CONSUMER  
ENGAGED IN A PERSONAL AND NON-  
Notice  
The information contained in this manual, including but not  
limited to any product specifications, is subject to change  
without notice.  
TOSHIBA CORPORATION AND TOSHIBA  
AMERICA INFORMATION SYSTEMS, INC.  
(TOSHIBA) PROVIDES NO WARRANTY WITH  
REGARD TO THIS MANUAL OR ANY OTHER  
INFORMATION CONTAINED HEREIN AND  
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR ANY PARTICULAR PURPOSE WITH  
REGARD TO ANY OF THE FOREGOING. TOSHIBA  
ASSUMES NO LIABILITY FOR ANY DAMAGES  
INCURRED DIRECTLY OR INDIRECTLY FROM  
ANY TECHNICAL OR TYPOGRAPHICAL ERRORS  
OR OMISSIONS CONTAINED HEREIN OR FOR  
DISCREPANCIES BETWEEN THE PRODUCT  
AND THE MANUAL. IN NO EVENT SHALL  
TOSHIBA BE LIABLE FOR ANY INCIDENTAL,  
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY  
DAMAGES, WHETHER BASED ON TORT,  
CONTRACT OR OTHERWISE, ARISING OUT  
OF OR IN CONNECTION WITH THIS MANUAL  
OR ANY OTHER INFORMATION CONTAINED  
HEREIN OR THE USE THEREOF.  
COMMERCIAL ACTIVITY AND/OR WAS  
OBTAINED FROM A VIDEO PROVIDER LICENSED  
TO PROVIDE AVC VIDEO. NO LICENSE IS  
GRANTED OR SHALL BE IMPLIED FOR ANY  
OTHER USE. ADDITIONAL INFORMATION MAY  
BE OBTAINED FROM MPEG LA, LLC. SEE  
HTTP://WWW.MPEGLA.COM  
• THIS PRODUCT IS LICENSED UNDER THE  
VC-1 PATENT PORTFOLIO LICENSE FOR  
THE PERSONAL AND NONCOMMERCIAL USE  
OF A CONSUMER TO (i) ENCODE VIDEO IN  
COMPLIANCE WITH THE VC-1 STANDARD  
(“VC-1 VIDEO”) AND/OR (ii) DECODE VC-1  
VIDEO THAT WAS ENCODED BY A CONSUMER  
ENGAGED IN A PERSONAL AND NON-  
COMMERCIAL ACTIVITY AND/OR WAS  
OBTAINED FROM A VIDEO PROVIDER LICENSED  
TO PROVIDE VC-1 VIDEO. NO LICENSE IS  
GRANTED OR SHALL BE IMPLIED FOR ANY  
OTHER USE. ADDITIONAL INFORMATION MAY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
11  
Connecting an HDMIor DVI device to the HDMI™  
Connecting an HDMIaudio system ......................... 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
13  
Using HDMICEC Control......................................... 81  
HDMICEC Control input source selection.......... 83  
DynaLight® ........................................................ 100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
14  
ClearScan® ........................................................ 100  
Using the Dolby® Digital Dynamic Range  
Using Audyssey EQ® for Wall Mounted or  
Using Audyssey Dynamic Volume ® .................. 110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
15  
Using Intel® WiDi .................................................... 124  
Changing the Intel® WiDi Device Name.............. 125  
Netflix® .............................................................. 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
16  
ColorStream® (component video) HD input....... 171  
HDMIinput ...................................................... 171  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Introduction  
Safety icons  
This manual contains safety instructions that must be observed to avoid  
potential hazards that could result in personal injuries, damage to your  
equipment, or loss of data. These safety cautions have been classified  
according to the seriousness of the risk, and icons highlight these  
instructions as follows:  
Indicates an imminently hazardous situation which, if not avoided, will result in  
death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, could result in  
death or serious injury.  
Indicates a potentially hazardous situation which, if not avoided, may result in  
minor or moderate injury.  
Indicates a potentially hazardous situation which, if not avoided, may result in  
property damage.  
Provides important information.  
NOTE  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
19  
Features  
Features  
Integrated digital tuning (8VSB ATSC and QAM) —  
Eliminates the need for a separate digital converter set-top box (in  
most cases).  
1920 x 1080 display resolution.  
Four HDMI—Digital, High-Definition Multimedia Interfaces  
with 1080p input support  
HDMIcapabilities ARC (Audio Return Channel)—Enables the  
audio signal of the TV to be sent to an AV amplifier via an HDMI™  
cable.  
HDMICEC Control—Allows control of external devices from  
the TV remote via HDMIconnection  
ColorStream® HD—High-resolution component video input.  
Digital Audio Out—Optical audio connection with Dolby® Digital  
CQ Engine™—A powerful video processing engine with an array  
of advanced technology including Edge Enhancement, Dynamic  
Gamma, ColorMaster , Expert Mode and new UltraClear DNR that  
creates superior picture quality.  
UltraClear DNR—The new Dynamic Noise Reduction technology  
that filters out video noise without decreasing picture sharpness for  
clean, crystal-clear images, see “UltraClear DNR” on page 101.  
PC IN (Analog RGB)—Computer Input terminal, see “Connecting  
IR Blaster Out— Controls infrared remote controlled devices from  
the TV.  
Built-in WLAN—Allows the television to access your home  
wireless network.  
Intel® WiDi— Allows direct wireless connection between the TV  
and Intel® WiDi equipped computers or mobile devices  
ColorMaster— Allows you to adjust the TV’s standard colors, see  
DynaLight— Backlight control monitors the brightness of each  
video frame and automatically adjusts backlight intensity based on  
the content to create higher dynamic contrast, for deeper blacks and  
increased depth, see “DynaLight®” on page 100.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
Overview of installation, setup, and use  
20  
Cinema Modeshows film-like quality movies (for  
32/39/50L4300U models only). For more information, please see  
ClearScan® 120Hz—Technology utilizes advanced backlight  
control with image synchronization to double the television  
refresh rate for clearer fast motion video. This technology is  
ideal for watching action movies, sports and video games. (For  
32/39/50L4300U models)  
ClearScan® 240Hz—Technology uses both frame interpolation  
technology and advanced backlight control with image  
synchronization to quadruple the TV refresh rate for an even clearer  
fast motion video. (For 58L4300U and 50/58/65L7300U) For more  
information, please see “ClearScan®” on page 100.  
AutoView®—Allows TV to automatically adjust picture settings  
including Brightness, Contrast, Gamma, and Sharpness based  
on ambient room light conditions and incoming picture content  
to create the best possible picture settings without any manual  
adjustment. See “ENERGY STAR® User Information” on page 8.  
Audyssey Premium Television® — includes innovative audio  
enhancement technologies that create clear, rich, and natural sound.  
These technologies include EQ®, ABX, Dynamic Volume®,  
Volume ExtensionTM, and Day/Night and Wall/Table Modes. see  
MediaShare—Allows you to view photo files and play music or  
141.  
Cloud TV—Enhanced content discovery includes real time  
streaming news, true social interaction features, and mobile device  
interaction.  
ENERGY STAR® qualified  
Overview of installation, setup, and use  
Follow these steps to set up your TV and begin using its many exciting  
features.  
1
Carefully read the important safety, installation, care, and service  
information. Keep this manual for future reference.  
2
To choose a location for the TV:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
21  
Overview of installation, setup, and use  
Place the TV on the floor or a sturdy, level, stable surface that  
can support the weight of the unit. Secure the TV to a wall,  
pillar, or other immovable structure, see 24) on page 4.  
Place the TV in a location where light does not reflect on the  
screen.  
Place the TV far enough from walls and other objects to allow  
proper ventilation. Inadequate ventilation may cause overheating,  
which will damage the TV. THIS TYPE OF DAMAGE IS NOT  
COVERED UNDER THE TOSHIBA WARRANTY.  
3
4
Do not plug in any power cords until after you have connected all  
cables and devices to your TV.  
Before connecting cables or devices to the TV, review the functions  
of the TV’s connections and controls, see “Overview of cable types”  
5
6
7
8
Connect your other electronic device(s) to the TV, see “Connecting  
Install the batteries in the remote control, see “Installing batteries”  
the buttons on the remote control.  
After connecting all cables and devices, plug in the power cords for  
your TV and other devices. Then press the POWER button on the  
TV control panel or remote control to turn on the TV.  
If the TV stops responding to the buttons on the remote control or TV  
control panel and you cannot turn the TV off or on, unplug the power cord  
for a few seconds and then plug it in and try again.  
NOTE:  
9
overview of navigating the TV’s menu system.  
10 Program channels into the TV’s channel memory, see “Auto  
11 For details on using the TV’s features, see chapters 6, 7, and 8.  
12 For help, refer to “Troubleshooting” on page 160.  
13 For technical specifications, see “Specifications” on page 169.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
22  
TV front and side panel controls and connections  
TV front and side panel controls and connections  
1 Analog  
Video port  
ARC HDMITM  
only port  
3 HDMITM ports  
2 USB ports  
1 Digital  
Audio jack  
Remote sensor  
Ambient light sensor  
Power LED  
(Sample Illustration) L7300U Series front and side panel controls and  
connections  
1 Analog  
Video port  
3 HDMITM ports  
ARC HDMITM  
only port  
1 Digital  
Audio jack  
2 USB ports  
Remote sensor  
Ambient light sensor  
Power LED  
(Sample Illustration) L4300U Series front and side panel controls and  
connections  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
23  
TV front and side panel controls and connections  
Front panel  
1
Power On/Standby LED—Power indicator light, (glows green  
when the TV power is On).  
2
3
Ambient light sensor—This sensor detects the ambient light  
conditions to optimize the backlighting levels, see “Ambient Light  
Remote Sensor—Point the remote control toward this remote  
Left side  
4
Analog Video Port—Analog ideo input. Connect using a  
commercially available conversion cable.  
V
5
3 HDMIPorts—High-Definition Multimedia Interface input  
receives digital audio and uncompressed digital video from an  
HDMIdevice or uncompressed digital video from a DVI device.  
HDMIconnection is necessary to receive 1080p signals.  
6
7
ARC HDMIonly port—Audio Return Channel (ARC) enables  
the audio signal of the TV to be sent to an AV amplifier via the  
HDMI cable.  
Digital Audio Jack—Optical audio output in Dolby® Digital or  
PCM (pulse-code modulation) format for connecting an external  
Dolby® Digital decoder, amplifier, A/V receiver, or home theater  
system with optical audio input.  
8
2 USB Ports—Used to access video, music, or photo files with  
USB device. Works with wireless keyboard (but only included with  
L7300U).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Introduction  
TV back panel controls and connections  
24  
TV back panel controls and connections  
For explanations of cable types and connections, see “Connecting Your  
POWER button  
Volume up  
Volume down  
IR Blaster OUT  
Switches the function of VOL+/-  
buttons to select volume, channel, or  
input mode.  
LAN  
LAN  
HDMI IN  
HDMITM IN port  
4
IR  
OUT  
FIXED  
AUDIO  
OUT  
OUT  
Analog Audio OUT  
PC IN  
PC  
/
HDMI  
2
AUDIO  
IN  
PC IN  
ANT/CABLE  
R
AUDIO  
L
/
MONO  
PR  
PB  
Y
/
VIDEO  
COLOR STREAM HD / VIDEO 2 IN  
Antenna / Cable  
PC / HDMITM  
Audio IN  
Colorstream HD /  
Video 2 IN  
®
(Sample Illustration) L7300U Series back panel controls and  
connections  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Introduction  
TV back panel controls and connections  
25  
Left Side  
POWER button  
Volume up  
Volume down  
Switches the function of  
VOL+/- buttons to select  
volume, channel, or input  
mode.  
IR Blaster OUT  
LAN  
LAN  
HDMI IN  
HDMITM IN port  
4
IR  
OUT  
FIXED  
AUDIO  
OUT  
OUT  
Analog Audio OUT  
PC IN  
PC  
/
HDMI  
2
AUDIO  
PC / HDMITM Audio IN  
IN  
PC IN  
R
L
/
MONO  
P
R
P
B
Y
/
VIDEO  
®
Colorstream HD /  
Video 2 IN  
AUDIO  
COLOR STREAM HD / VIDEO 2 IN  
32/39/50L4300U  
58L4300U  
ANT/CABLE  
ANT/CABLE  
Antenna / Cable  
(Sample Illustration) L4300U Series back panel controls and  
connections  
Back panel controls  
1
POWER—Turns the TV On and Off.  
2
VOL +/– —Adjust the volume level, change the channel, or change  
the input or source you are viewing, depending on the mode, which  
is selected by the CH/INPUT button.  
3
CH / INPUT— Switches the function of the VOL +/– buttons to  
select the volume, channel, or input mode.  
In Volume mode, the arrow buttons increase or decrease the  
volume.  
In Channel mode, the arrow buttons change the channel up or  
down.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Introduction  
TV back panel controls and connections  
26  
Back panel connections  
4
LAN—Connects the TV to your home network.  
5
HDMIIN—High-Definition Multimedia Interface input receives  
digital audio and uncompressed digital video from an HDMI™  
device or uncompressed digital video from a DVI device. HDMI™  
connection is necessary to receive 1080p signals.  
6
Analog Audio Port—Analog audio outputs for connecting an audio  
amplifier.  
7
8
PC IN—For use when connecting a personal computer.  
ANT/CABLE—Antenna input that supports analog (NTSC) and  
digital (ATSC) off-air antenna signals and analog and in the clear,  
unencrypted digital Cable TV (QAM) signals.  
9
ColorStream® HD/ Video 2 IN—These include standard A/V  
connections, see “Connecting DVD to ColorStream® or VCR to  
10 PC/HDMIAudio IN—PC audio input terminals are shared  
with HDMI-2 analog audio input terminals, and their use can be  
configured in the Configuring shared inputs menu, see “Configuring  
11 IR Blaster OUT—Used to connect and control infrared remote-  
controlled devices.  
Component/Standard (composite) video cables carry only video  
information; separate audio cables are required.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2  
Connecting Your TV  
Overview of cable types  
Before purchasing cables, know the connector types your devices require.  
You can purchase cables from most stores that sell audio/video devices.  
Coaxial cable (F-type)  
(Sample Illustration) Coaxial cable  
Coaxial (F-type) cable connects your antenna, cable TV service, and/or  
cable converter box to the ANT/CABLE input on your TV.  
Please tighten this connection by hand. Using tools may damage the  
connection.  
NOTE  
Standard A/V cables (red/white/yellow)  
(Sample Illustration) Standard A/V cables  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting Your TV  
Overview of cable types  
28  
Standard A/V cables (composite video) usually come in sets of three, and  
connect to video devices with analog audio and composite video output.  
These cables (and the related inputs on your TV) are typically color-  
coded according to use: yellow for video, red for stereo right audio, and  
white for stereo left (or mono) audio.  
Component video cables (red/green/blue)  
(Sample Illustration) Component video cables  
Component video cables come in sets of three and are for use with video  
devices with component video output. (ColorStream® is Toshiba’s brand  
of component video.) These cables are typically color-coded red, green,  
and blue. Separate audio cables are required for a complete connection.  
Component video cables provide better picture quality than composite  
video cables.  
NOTE  
HDMIcable (with HDMI Logo)  
(Sample Illustration) HDMIcable  
HDMI(High-Definition Multimedia Interface) cable connects to devices  
that have an HDMIoutput. An HDMIcable delivers digital audio and  
video in its native format. Separate audio cables are not required, see  
“Connect a computer to the TV’s HDMIterminal” on page 43.  
HDMIcables provide the best audio and picture quality.  
NOTE  
Dual-wand IR blaster cable  
Connect the dual-wand IR blaster cable to the IR blaster terminal to  
control infrared remote controlled devices from the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting Your TV  
Overview of cable types  
29  
Optical audio cable  
(Sample Illustration) Optical audio cable  
Optical audio cable connects receivers with Dolby® Digital or PCM  
(pulse-code modulation) optical audio input to the TV’s Digital Audio  
Analog RGB (15-pin) computer cable  
(Sample Illustration) Analog RGB (15-pin) computer cable  
Analog RGB (15-pin) computer cable connects a computer to the to the  
Separate audio cables are required.  
NOTE  
3.5mm Stereo to RCA Y-cable  
(Sample Illustration) 3.5mm Stereo to RCA Y- cable  
3.5mm Stereo to RCA Y-cable connects an audio signal from DVI device  
to TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting Your TV  
Connecting an antenna, satellite receiver, and cable TV box  
30  
LAN cable  
(Sample Illustration) LAN cable  
Standard LAN cable connects the TV to your home network, see  
Crossover LAN cable connects the TV directly to a computer, see  
About the connection illustrations  
You can connect different types and brands of devices to your TV in  
several different configurations. The connection illustrations in this  
manual are representative of typical device connections only. The input/  
output terminals on your devices may differ from those illustrated. For  
details on connecting and using your specific devices, refer to each  
device’s owner’s manual.  
Connecting an antenna, satellite receiver, and/or cable TV  
box  
Satellite receiver with component video  
AUDIO  
OLUT  
Y
P
B
P
R
TV back panel  
R
AUDIO  
L
/
MONO  
P
R
P
B
Y
/
VIDEO  
W
R
Satellite dish  
R
COMPONENT VIDEO  
VIDEO  
OUT  
Satellite  
IN  
COLOR STREAM HD  
/
VIDEO  
2
IN  
G
B
R
Standard  
R
W
R
B
G
audio cable  
ANT/CABLE  
Component video cable  
VHF/UHF  
Antenna  
Coaxial cable  
Cable box  
CH  
CH  
3
4
Cable TV  
OUT  
IN  
R
White Red Green Blue  
(Sample Illustration) L7300U Series—Connecting to an antenna,  
satellite receiver, and/or cable TV box  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting Your TV  
Connecting an antenna, satellite receiver, and cable TV box  
31  
Satellite receiver with component video  
AUDIO  
OLUT  
R
L
/
MONO  
P
R
P
B
Y
/
VIDEO  
Y
P
B
P
R
TV back panel  
W
R
Satellite dish  
R
COMPONENT VIDEO  
VIDEO  
OUT  
Satellite  
IN  
AUDIO  
COLOR STREAM HD  
/
VIDEO IN  
2
G
B
R
Standard  
R
W
R
B
G
audio cable  
ANT/CABLE  
Component video cable  
VHF/UHF  
Antenna  
Coaxial cable  
Cable box  
CH  
CH  
3
4
Cable TV  
OUT  
IN  
R
White Red Green Blue  
(Sample Illustration) L4300U Series—Connecting to an antenna,  
satellite receiver, and/or cable TV box  
Items needed:  
Coaxial cables  
Standard AV cables  
Component video cables (red/green/blue)  
When you use a cable box, you may not be able to use the remote control  
to program or access certain features on the TV.  
NOTE  
To view the antenna or cable signal:  
Select ANT/CABLE video input source on the TV.*  
To view basic and premium cable channels:  
Select the ANT/CABLE video input source on the TV.* Tune the TV to  
channel 3 or 4 (whichever channel the cable box output is set to). Use the  
cable box controls to change channels.  
To view the VCR or camcorder video:  
Turn On the VCR or camcorder video. Select VIDEO input source on the  
TV.*  
*To select the video input source, press the INPUT button on the remote  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your TV  
Connecting DVD to ColorStream® or VCR to composite video  
32  
The unauthorized recording, use, distribution, or revision of television  
programs, videotapes, DVDs, and other materials is prohibited under the  
Copyright Laws of the United States and other countries, and may subject  
you to civil and criminal liability.  
NOTE  
Connecting DVD to ColorStream® or VCR to composite video  
R
Standard A/V cable  
Yellow White Red Green Blue  
Y
W
R
VCR  
R
W
Y
L
R
TV back panel  
VIDEO  
AUDIO  
R
AUDIO  
L
/
MONO  
P
R
PB  
Y
/
VIDEO  
DVD player  
COMPONENT VIDEO  
AUDIO OUT  
L
R
Y
P
B
P
R
COLOR STREAM HD / VIDEO 2 IN  
G
R
W
R
B
G
B
R
W
R
Standard audio cable  
Component video cable  
(Sample Illustration) L4300U/L7300U Series—Connecting a DVD with  
ColorStream® or a VCR with composite video  
Items needed:  
Coaxial cables  
Standard AV cables  
Standard audio cables  
Composite or component video cables  
You can connect the component video cables (plus audio cables)  
from the DVD player or satellite receiver to the COLOR  
STREAM HD terminal in the TV. The COLOR STREAM  
HD terminal can be used to display Progressive (480p, 720p,  
1080p) and Interlaced (480i, 1080i) scan systems.  
If your DVD player or satellite receiver does not have  
component video, connect a standard A/V cable to the AUDIO/  
VIDEO terminal. If your DVD player has HDMIvideo, see  
“Connecting an HDMIor DVI device to the HDMIinput” on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting remote IR devices  
33  
When you use ColorStream® HD or Video, please switch to the appropriate  
AV mode.  
NOTE  
To view antenna or Cable channels:  
Select the ANT/CABLE video input source on the TV.*  
To view the DVD player:  
Turn ON the DVD player. Select the ColorStream® HD video input source  
on the TV.*  
To view satellite programs using the component video connections:  
Turn ON the satellite receiver. Select the ColorStream® HD video input  
source on the TV.*  
To view the VCR or view and record antenna channels:  
Turn ON the VCR. Tune the VCR to the channel you want to watch.  
Select the VIDEO video input source on the TV.*  
To record a TV program while watching a DVD:  
Turn ON the VCR. Tune the VCR to the channel to record. Select the  
ColorStream® HD video input source on the TV* to view the DVD.  
*To select the video input source, press the INPUT button on the remote  
The unauthorized recording, use, distribution, or revision of television  
programs, videotapes, DVDs, and other materials is prohibited under the  
Copyright Laws of the United States and other countries, and may subject  
you to civil and criminal liability.  
NOTE  
Connecting remote IR devices  
Using the IR blaster OUT terminal  
You can use the TV’s IR OUT terminal to remotely operate many infrared  
remote-controlled devices enclosed in an entertainment center or similar  
cabinet.  
Items needed:  
Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on  
Other cables as required to connect the device(s) to the TV (see  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting Your TV  
34  
Connecting remote IR devices  
To connect the IR blaster cable:  
1
Locate the infrared sensor on the front of your device. This sensor  
is marked on some devices. If you are having issues locating the  
device's infrared sensor, see “If you cannot locate the device’s  
2
Align one of the IR blaster cable’s wands approximately 1 inch  
away from the infrared sensor on the front of the device and attach  
it using double-sided mounting tape. If you have a second device,  
attach the second wand in a similar manner.  
If you do not have a second device, coil the second wand with a rubber  
band and leave it behind the TV.  
NOTE  
3
Plug the IR blaster cable’s plug into the TV’s IR Blaster Out  
terminal.  
Front of IR-controlled DVD player (for example)  
Front of IR-controlled audio device (for example)  
Infrared  
sensor  
Dual-  
wand IR  
blaster  
cable  
IR blaster cable wand  
(approx. 1 inch from device)  
TV back panel  
IR  
OUT  
OUT  
(Sample Illustration) L4300U/L7300U Series—Using the IR blaster  
OUT terminal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your TV  
Connecting remote IR devices  
35  
To control the device(s):  
Point the TV remote control toward the front of the TV and press the  
button for the desired function. The signal passes from the remote  
control through the TV to the device via the IR Blaster cable. For more  
(Sample Illustration) Controlling the device(s) - remote control  
The IR pass-through feature does not support all IR controlled devices.  
Satisfactory quality may not be attainable with certain devices.  
NOTE  
If you cannot locate the device’s infrared sensor:  
1
2
Turn off the device.  
Starting at the device’s lower-left corner, place the end of the  
device’s remote control (with the infrared emitter) so it touches the  
front of the device. Press the POWER button.  
(Do not use the TV’s remote control for this step.)  
3
4
5
If the device turns on, the sensor is located where the remote control  
touched the device.  
If the device does not turn on, move the remote control slightly to  
the right and press the POWER button again.  
Repeat the previous steps if necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Your TV  
Connecting a digital audio system  
36  
Connecting a digital audio system  
The TV’s Digital Audio Out terminal outputs a Dolby® Digital or  
2-channel down-mixed PCM (pulse-code modulation) signal for using  
with an external Dolby® Digital decoder or other external audio systems  
with optical audio input.  
You will need an Optical audio cable (Use an optical audio cable that  
has the larger “TosLink” connector and not the smaller “mini-optical”  
connector.)  
TV back panel  
Digital audio system  
HDMI IN  
LINE IN  
Optical  
Audio IN  
L
R
DIGITAL AUDIO  
OUT  
Optical audio cable  
(Sample Illustration) L4300U/L7300U Series—Connecting a digital  
audio system  
Before controlling the audio, see “Selecting the optical audio output  
Some audio systems may not be compatible with Dolby Digital bitstream  
signals. Older audio systems that are not compatible with standard optical  
out signals may not work properly, creating a high noise level that may  
damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY  
YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may not output some  
digital audio sources because of copy restrictions.  
NOTE  
The Dolby Digital format is available in the following situations:  
- When tuned to a digital RF channel  
- When an HDMI input is used  
- When network devices are used  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting an HDMIor DVI device to the HDMIinput  
37  
Connecting an HDMIor DVI device to the HDMIinput  
The HDMIinput on your TV receives digital audio and uncompressed  
digital video from an HDMIsource device, or uncompressed digital  
video from a DVI (Digital Visual Interface) source device.  
This input is designed to accept HDCP (High- Bandwidth Digital-Content  
Protection) program material in digital form from EIA/CEA-861-D–  
compliant[1] consumer electronic devices (such as a set-top box or DVD  
player with HDMIor DVI output).  
The HDMIinput can accept and display VGA, SVGA, XGA, WXGA,  
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p  
(24Hz/30Hz/60Hz) signal formats. For detailed signal specifications, see  
“HDMIsignal formats” on page 176.  
The supported Audio formats are Linear PCM and Dolby® Digital,  
sampling rate 32/44.1/ 48 kHz.  
To connect a PC to the HDMIinput, see “Connect a computer to the TV’s  
NOTE  
HDMIterminal” on page 43.  
To connect an HDMIdevice, you will need one HDMIcable (type A  
connector) per HDMIdevice:  
For proper operation, it is recommended that you use an HDMI™  
cable with the HDMILogo (  
).  
To display an 1080ip/60Hz signal format, you will need a High  
Speed HDMIcable. A conventional HDMI/DVI cable may not  
work properly.  
HDMIcables transfer both video and audio. Separate analog audio  
cables are not required (see illustration).  
HDMI IN  
TV back panel  
TM  
HDMI device (satellite or  
cable box, DVD player, etc)  
4
HDMI OUT  
TM  
HDMI cable  
DVI device  
HDMI IN  
TM  
DVI/HDCP  
OUT  
HDMI -to-DVI adapter cable  
OUT  
L
R
PC  
/
HDMI  
2
AUDIO  
Analog audio cable  
IN  
(Sample Illustration) L4300U/L7300U Series—Connecting an HDMI™  
or DVI device to the HDMIInput  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting an HDMIor DVI device to the HDMIinput  
38  
To view the HDMIdevice video:  
Select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source  
on the TV. (Press the INPUT button on the remote control. For more  
To connect a DVI device, you will need:  
HDMIto DVI adapter cable  
For proper operation, the length of an HDMIto DVI adapter cable  
should not exceed 9.8 ft (3m). The recommended length is 6.6 ft  
(2m).  
3.5mm Stereo to RCA Y-cable  
An HDMIto DVI adapter cable transfers video only. Separate  
analog audio cables are required (see illustration).  
To ensure that the HDMIor DVI device is reset properly:  
NOTE  
NOTE  
When turning on your electronic components, turn on the TV first, and  
then the HDMIor DVI device.  
When turning off your electronic components, turn off the HDMIor  
DVI device first, and then the TV.  
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed  
digital video with high-bandwidth digital content protection, which is being  
standardized for reception of high definition video signals. Because this is  
an evolving technology, it is possible that some devices may not operate  
properly with the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your TV  
Using the TV remote and HDMI™  
CEC Control to control other devices 39  
Using the TV remote and HDMICEC Control to control other  
devices  
To control the basic functions of connected audio/video devices using  
the TV’s remote control, connect an HDMICEC compatible audio  
system or playback device. The HDMICEC Control feature uses CEC  
technology as regulated by the HDMIstandard.  
Playback device  
Audio system  
(HDMI™ CEC DVD player, etc.)  
TV back panel  
HDMI OUT  
HDMI OUT  
HDMI IN  
HDMI IN  
TM  
HDMI cable  
Playback device  
(HDMI™ CEC DVD player, etc.)  
4
HDMI OUT  
TM  
HDMI cable  
HDMI IN  
(Sample Illustration) L4300U/L7300U Series—Connecting an HDMI™  
CEC compatible audio system and playback device  
To connect an audio system and playback devices, you will need HDMI™  
cables, see “HDMIcable (with HDMI Logo)” on page 28.  
If several devices are connected, HDMICEC Control feature may not  
NOTE  
operate properly, see “HDMICEC Control input source selection” on  
For proper operation, it is recommended that you use HDMIcables  
with the HDMILogo (  
).  
HDMICEC devices can be controlled by TV remote only when it is  
the TV mode.  
Before controlling the devices:  
For an explanation of setup and operations, see “Other HDMI™  
Configure the connected devices. See each device’s operation  
manual.  
This feature is limited to models incorporating HDMICEC Control feature.  
However, Toshiba is not liable for those operations. See the individual  
instruction manuals for compatibility information.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting an HDMIaudio system  
40  
When using an external AV amplifier the picture and sound may not be  
properly synchronized. In this case, adjust the delay time of the sound on  
the AV amplifier.  
The control range of the delay time differs according to the device you use.  
NOTE  
Connecting an HDMIaudio system  
If your HDMIaudio system supports ARC, audio from the TV can be  
sent to the audio system via an existing HDMIcable.  
You will need an HDMIcable.  
TV back panel  
3
2
1
(ARC)  
HDMI  
cable  
Audio system that  
supports ARC  
(Sample Illustration) L4300U/L7300U Series— Connecting to HDMI™  
ARC  
HDMI's ARC (Audio Return Channel) feature  
This feature enables the audio signal of the TV to be sent to an audio  
system via the HDMIcable. It will not be necessary to connect a cable  
from the audio output of the TV to the audio input of the audio system to  
reproduce the audio received from the tuner of the TV through the audio  
system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Your TV  
Connecting a computer  
41  
Connecting a computer  
With either the PC IN or HDMIconnection, you can view your  
computer’s display on the TV and hear the sound from the TV’s speakers.  
Connecting a computer to the TV’s PC IN terminal  
When connecting a computer to the PC IN terminal on the TV, use an  
analog RGB (15-pin) computer cable and a PC audio cable. For more  
TV back panel  
PC / HDMI 2  
AUDIO  
IN  
PC IN  
PC audio  
cable  
PC audio  
output  
Conversion adapter  
(if necessary)  
(Sample Illustration) L4300U/L7300U Series—Connecting to a  
computer through analog RGB cable  
To use a computer, set the monitor output resolution on the computer  
before connecting it to the TV. The supported signal formats are VGA,  
SVGA, XGA, WXGA and SXGA. For detailed signal specifications, see  
Other formats or non-standard signals will not be displayed correctly.  
To display the optimum picture, use the computer setting feature, see  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting Your TV  
Connecting a computer  
42  
The PC audio input terminal on the TV is shared with the HDMI 2  
terminal. For configuration information, see “Setting the computer  
NOTE  
Some computer models cannot be connected to this TV.  
If the computer has a compatible mini D-sub15-pin terminal, an  
adapter is not required.  
Depending on the content’s title and the computer’s specifications,  
some scenes may be skipped or you may not be able to pause during  
multi-angle scenes.  
Signal names for mini D-sub 15-pin connector:  
Pin  
No.:  
1
2
3
Signal  
Name:  
R
G
B
Pin No.: Signal  
Name:  
Pin No.: Signal  
Name:  
6
7
8
9
Ground  
Ground  
Ground  
5V  
11  
12  
13  
14  
15  
NC  
SDA  
H-sync  
V-sync  
SCL  
4
5
NC*  
Ground  
10  
Ground  
*NC=Not connected  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your TV  
43  
Connecting a computer  
Connect a computer to the TV’s HDMIterminal  
When connecting a computer with a DVI port to the HDMIterminal on  
the TV, use an HDMIto DVI adapter cable and analog audio cables.  
When connecting a computer with an HDMIport, use an HDMIcable  
(type A connector). Separate analog audio cables may not be necessary,  
depending on computer hardware and setup.  
For more information, see “Overview of cable types” on page 27.  
LAN  
HDMI IN  
4
IR  
OUT  
FIXED  
AUDIO  
OUT  
IN  
OUT  
PC  
/
HDMI  
2
AUDIO  
PC IN  
(Sample Illustration) L4300U/L7300U Series—Connecting to an  
HDMIterminal  
The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA,  
480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p  
(24Hz/30Hz/60Hz). For signal specifications, see “Acceptable signal  
formats for PC IN and HDMI” on page 175.  
The edges of the picture may be hidden.  
NOTE  
If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p  
signal program, Native mode scales the video to display the entire  
picture within the borders of the screen (i.e. no overscanning).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting to a home network  
44  
Connecting to a home network  
The LAN port allows your Toshiba TV to connect to your home network.  
You can use this home network to access photos, movies, and music files  
that are stored on a connected Media Server and play them on your TV.  
Connecting the TV directly to a computer without an Internet connection  
You will need a Crossover LAN cable.  
LAN  
(Sample Illustration) L4300U/L7300U Series—Connecting a computer  
without Internet connection  
Connecting the TV to a home network without an Internet connection  
Items needed:  
Standard LAN cables  
Router with a hub  
Router with a hub  
Computer  
TV back panel  
LAN  
Computer  
(Sample Illustration) L4300U/L7300U Series—Connecting a network  
without Internet connection  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connecting Your TV  
Connecting to a home network  
45  
Connecting the TV to a home network with an Internet connection -  
wired  
Items needed:  
Coaxial or telephone cable (depending on your modem type)  
Standard LAN cables  
Router with Hub  
Modem (DSL or cable)  
Modem (DSL or cable)  
Router with a hub  
1
2, 3  
2
TV back panel  
LAN  
Cable or  
Phone jack  
Computer  
2
(Sample Illustration) L4300U/L7300U Series—Connecting with  
Internet connection - wired  
Item: Description:  
1
2
3
Coaxial or telephone cable (depending on your modem type)  
Standard LAN cable  
Do NOT connect a phone jack directly to the TV’s LAN  
port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Your TV  
Connecting to a home network  
46  
Connecting the TV to a home network with an Internet connection -  
wireless  
Items needed:  
Coaxial or telephone cable (depending on your modem type)  
Standard LAN cables  
Wireless LAN access point or wireless router  
Modem (DSL or cable)  
Modem (DSL or cable)  
Wireless LAN access point  
1
Built-in WLAN system:  
It is not nessesary to connect an  
external WLAN adaptor to the TV  
2
Cable or  
Phone jack  
Computer  
2
(Sample Illustration) L4300U/L7300U Series—Connecting with  
Internet connection - wireless  
Item:  
Description:  
1
Coaxial or telephone cable (depending on your modem  
type)  
2
Standard LAN cable  
The transmission speed over the wireless LAN and the distance over  
which wireless LAN can reach may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, and client design and software/hardware configurations.  
The actual transmission speed will be lower than the theoretical maximum  
speed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3  
Using the Remote Control  
Controlling other devices  
The TV’s remote control can operate other devices as described in the IR  
Installing batteries  
To install batteries:  
1
Slide back and pull up to open the cover.  
(Sample Illustration) Removing the battery cover  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the Remote Control  
48  
Installing batteries  
2
Install two AAA size batteries.  
Use carbon zinc batteries or alkaline batteries.  
NOTE  
(Sample Illustration) installing the batteries  
3
Slide on the cover.  
Do not expose batteries to excessive heat such as sunshine, fire, etc.  
Dispose of batteries in a designated disposal area.  
NOTE  
Always consider the environment when disposing of batteries.  
Always follow applicable laws and regulations.  
If the remote does not operate correctly, or if the operating range is  
reduced, replace the batteries.  
Always replace both batteries with new ones. Never mix battery types  
or use new and used batteries together.  
Always remove batteries from the remote if they are dead or if the  
remote control is not to be used for an extended period of time.  
This prevents battery acid from leaking into the battery compartment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Remote control effective range  
49  
Remote control effective range  
1
For optimum performance, aim the remote control directly at the TV  
and make sure there are no obstructions between the remote control  
and the TV.  
16.4 ft (5m)  
(Sample Illustration) Remote control effective range  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Remote Control  
Learning about the remote control  
50  
Learning about the remote control  
Only the buttons used to operate the TV are described in this section.  
For the HDMICEC Control functions, see “Using HDMICEC  
1
2
3
6
4
5
7
8
9
10  
11  
13  
14  
12  
15  
17  
20  
16  
18  
19  
21  
22  
23  
24  
26  
25  
27  
28  
30  
33  
29  
31  
32  
34  
35  
(Sample Illustration) Remote control overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Remote Control  
Learning about the remote control  
51  
The error message “Not Available” may appear if you press a button for a  
function that is not available.  
NOTE  
Item: Description:  
Function:  
Item: Description:  
21 QUICK button  
22 GUIDE button  
Function:  
1
POWER button  
Turns the TV On and Off. When  
the TV is on, the power LED  
indicator on the TV front glows  
green.  
Selects the video input source.  
Accesses the sleep timer.  
Launches the Quick menu.  
Launches the MediaGuide  
application on-screen.  
Selects or adjusts programming  
buttons menus when a menu is  
on-screen.  
Selects the highlighted items on  
the screen.  
Returns to the previous screen.  
Closes on-screen menus.  
: PLAY button  
u
23  
(
/
/
/
)
p q t u  
2
3
4
5
INPUT button  
SLEEP button  
TV button  
Cable/Satellite  
button  
24 OK button  
Sets the remote control mode to  
control the device: TV, CABLE/  
SAT, BD/DVD, DVR/VCR,  
AUDIO, or AUX  
25 BACK button  
26 EXIT button  
6
7
8
9
BD/DVD button  
DVR/VCR button  
Audio button  
Auxillary button  
27  
(
/
/
/
/
u
/
tt uu  
Z
/
)
: REWIND button  
tt  
z n W  
: FAST FORWARD button  
uu  
: SKIP-BACK button  
: SKIP-FORWARD button  
Z
z
10 Channel Number  
buttons (0-9)  
11 (–) button  
Directly tunes channels.  
: STOP button  
: PAUSE button  
W
Enters 2-part channel numbers.  
Returns to the last viewed  
channel or source.  
Displays TV status information  
as well as program details, when  
available.  
12 CH RTN button  
28 NETFLIX button  
Launches the Netflix®  
application on-screen.  
Launches the eManual  
application on-screen.  
Internet connection required.  
Used for TV, Cable/Sat, BD/  
DVD, Aux devices  
13 INFO button  
29 eMANUAL button  
30 REC button  
14 VOL (+ / -) buttons Adjusts the volume level.  
15 CH (  
/
) buttons Cycles through programmed  
channels.  
p q  
31 PIC SIZE button  
32 PIC MODE button  
33 SETUP button  
Cycles through the picture sizes.  
Selects the picture mode.  
Accesses the main TV menu  
system.  
Accesses the MTS options.  
Accesses the closed-caption  
feature.  
16 MUTE button  
17 MEDIA SHARE  
button  
18 SEARCH button  
19 HOME button  
Reduces or turns off the sound.  
Accesses the MediaShare  
Service.  
Accesses the SearchAll function.  
Accesses the Cloud TV Portal  
Pages.  
34 MTS button  
35 CC button  
20 INTERNET button  
Launches the web browser on-  
screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Initial Setup and Menu  
Initial setup  
When you first turn on or reset the TV, the Menu Language screen  
appears.  
You can stop Initial setup by pressing the EXIT button. However, if you  
do not finish Channel Tuning setting, the Quick Setup screen will  
appear every time you turn on your TV.  
NOTE  
The EXIT button does not work until after you have set the Store/  
Home Mode setting.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Initial Setup and Menu  
Performing the initial setup  
53  
Performing the initial setup  
1
Menu Language  
Select a language and press the OK button.  
Menu Language  
Please press [OK] to proceed.  
English  
Français  
Español  
(Sample Illustration) Selecting Menu Language  
Quick Setup screen will appear.  
About the Quick Setup screen  
The Quick Setup screen is divided into the progress window and setup  
window.  
The progress window shows the Quick Setup items being set up.  
The finished items are dark, and the finish mark ( ) appears by  
3
them.  
The setup window shows the settings.  
Progress window  
Setup window  
Quick Setup  
Country  
Country  
Welcome  
Thank you for choosing Toshiba TV  
Time Zone  
Store/Home Mode  
Network  
U.S.  
Canada  
Mexico  
Smart TV  
Channel Tuning  
IR Blaster  
Previous  
Next  
Next  
(Sample Illustration) Quick Setup and Welcome window.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial Setup and Menu  
54  
Performing the initial setup  
Basic Operations in Quick Setup  
1
Use the  
/
(arrow) buttons to select an item on the setup window,  
p q  
and press the OK button.  
2
Select Next and press the OK button.  
The next item will appear.  
Some items have sub menus, which appear when the OK button is  
pressed.  
Use the  
/
(arrow) buttons to select an item on the sub menu,  
p q  
and press the OK button.  
Quick Setup  
Country  
Time Zone  
1/3  
Submenu  
Time Zone  
Store/Home Mode  
Network  
Eastern  
Newfoundland  
Atlantic  
Time Zone  
Eastern  
Oꢀ  
Hawaii  
Smart TV  
Daylight Saving Time  
Alaska  
Paciꢁc  
Channel Tuning  
IR Blaster  
Mountain  
Central  
Previous  
Next  
(Sample Illustration) Quick Setup and Welcome window.  
Alternatively, press the (arrow) button to show the sub menu.  
u
When the (arrow) button is pressed on the setup window, the  
t
focus moves to the progress window. On the progress window, you  
can select a finished item using the  
/
(arrow) buttons.  
p q  
Quick Setup  
Network Type  
1/5  
Country  
Can be selected  
using the  
(arrow) buttons.  
/
p q  
Time Zone  
Store/Home Mode  
Network  
Network setup allows you to access content on your  
home network and the internet. Enjoy online video,  
music, games, news and more provided by Smart TV  
portal and keep your TV up to date with new  
software.  
Smart TV  
Availability is dependant on country selection  
Please select from Wired or Wireless  
Channel Tuning  
IR Blaster  
Network Type  
Previous  
Wired  
Next  
Skip  
(Sample Illustration) Quick Setup and Welcome window.  
Repeat the above procedure to continue setting up.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup and Menu  
Performing the initial setup  
55  
Performing the Quick Setup  
1
Country  
elect a country then press the OK button.  
S
2
Time Zone  
Select Time Zone, and select a time zone from the submenu.  
Select Daylight Saving Time, and select On or Off from the  
submenu.  
Select Next.  
3
Store / Home Mode  
Select Store / Home Mode, and select Home or Store from the  
submenu.  
To use at home, select Home.  
Select Next.  
Store Mode is only available if the TV is set to Store Mode at initial setup.  
This option is hidden in the Home Mode.  
NOTE  
4
Network  
To make full use of the functions, it is recommended that you  
set up a network and connect to the Internet.  
To start the Network Setup, select Next on the screen or to skip  
the setup, select Skip. If you skip this setup, you can setup the  
Network at any time through the Network menu.  
Network setup  
1
Select Network Type, and select Wired or Wireless from the  
sub menu.  
Select Next.  
If you select Wired, proceed to the Network Connection  
Test (Step 3). If you selected Wireless, please proceed to  
the following step.  
2
Select Wireless Setup, and select Easy Setup, Assisted  
Setup, or Manual Setup from the sub menu.  
Select Next.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Initial Setup and Menu  
Performing the initial setup  
56  
Easy Setup. If your Access Point (AP) supports WPS, this method  
can be used. WPS is a standard designed to simplify the connection of  
wireless LAN equipment and the setup of network security features.  
NOTE  
Assisted Setup (setup using the AP's notification information).  
The Network Name, Authentication, and Encryption are decided based  
on information from the AP. You need to manually set the Security Key  
for this method.  
Manual Setup (to input all settings manually).  
3
Once your wired or wireless network has been configured,  
perform a Network Connection Test.  
A network connection test screen will appear while the test  
is being performed. If the test was successful, the successful  
connection screen will appear.  
If the network connection test failed, the connection failure  
screen will appear.  
For more information, see “Setting up the Network” on page  
113 .  
4
Press the OK button.  
When the network can be accessed, Software Upgrade  
availability check starts automatically. When Software  
Upgrade is completed, proceed to the next step.  
In order to secure your home network, it is strongly recommended that you  
use a wireless access point with encryption.  
NOTE  
5
Smart TV  
Select TV Power On Control, and select Enabled or Disabled  
from the sub menu.  
If you select Enabled, you can turn on or off the television from  
the companion devices such as Tablet or Smartphone.  
Select Next.  
When Enabled is selected, perform the following procedure:  
1
Select Enable Control, and select On or Off from the sub  
menu.  
When On is selected, you can control the TV using companion  
devices such as a tablet or smartphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial Setup and Menu  
57  
Performing the initial setup  
2
3
Select Media Renderer, and select On or Off from the sub  
menu.  
When On is selected, the Media Renderer function can be  
used.  
Select Next.  
6
Channel Tuning  
Select Antenna or Cable, and select Start Scan.  
Auto Tuning will start.  
While scanning is in progress, the Auto Tuning Progress screen  
appears.  
If you do not want to scan channels, you do not need to make a selection  
for Channel Tuning. Select Skip to skip this step.  
NOTE  
NOTE  
If you want to stop scanning, pressing the EXIT button while scanning is in  
process.  
While scanning is in progress, the Auto Tuning Progress screen  
appears.  
After scanning is complete, the auto tuning results screen (such as  
the one below) will appear.  
Auto Tuning (Antenna)  
Antenna Channels Found: 13  
Ch.  
Type  
RF Ch.  
0
101 - 201  
201  
ATV  
DTV  
ATV  
DTV  
ATV  
DTV  
ATV  
11  
22  
33  
44  
55  
66  
77  
101 - 201  
201  
101 - 201  
201  
101 - 201  
201  
(Sample Illustration) Auto Tuning Results screen  
Press the OK button.  
The encrypted channels are not listed on the auto tuning result screen.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Initial Setup and Menu  
58  
Performing the initial setup  
If some channels are not found after scanning:  
Check the antenna/cable connections, and scan again.  
Connect the TV to the antenna or cable box directly and scan again.  
1
Press the SETUP button. Select Installation > Quick Setup  
and press the OK button.  
A confirmation message appears.  
2
3
Select Yes then press the OK button.  
Repeat setup to step 6 (Channel Tuning).  
If you selected Antenna previously, selecting Cable  
might be effective.  
If you selected Cable previously, selecting Antenna  
might be effective.  
4
Select Start Scan.  
7
IR Blaster  
Select Next or Skip.  
To start the IR Blaster setup, select Next on the screen, or to  
skip the setup, select Skip. If you skip this setup, you can setup  
the IR Blaster at any time through the Installation > IR Blaster  
Setup menu.  
The IR Blaster may not work with some devices, and it may not control  
certain features on your external devices.  
NOTE  
Setting the IR Blaster  
IR Blaster Setup  
1
Select Add on the screen.  
Device Type screen will appear.  
Device Type  
Select Device Type, and use the  
1
/
(arrow) buttons to select  
t u  
a device type from the following:  
Cable Box  
Satellite Box  
VCR  
Blu-ray, DVD Player  
Receiver, Misc Audio  
Amplifier  
CD Player  
Video Accessory  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Initial Setup and Menu  
59  
Performing the initial setup  
2
3
Press the (arrow) button then press the GREEN button.  
q
The Brand screen will appear.  
Use the  
/
(arrow) buttons to select the brand name then  
p q  
press the OK button.  
Select a field and press the OK button to show the  
software keyboard. Enter the first few characters of the  
brand name and press the GREEN button. The brand  
name starting with the entered characters will appear on  
the Brand screen.  
4
Press the OK button.  
Model Name screen will appear.  
Model Name  
1
Press the GREEN button.  
The Model Name screen will appear.  
Use the (arrow) buttons to select the model name then  
2
/
p q  
press the OK button.  
Select a field and press the OK button to show the  
software keyboard. Enter the first few characters of the  
model name and press the GREEN button. The model  
name starting with the entered characters will appear on  
the Model Name screen.  
3
Press the (arrow) button to select Code Set then press the  
q
OK button.  
Code Set screen will appear.  
Code Set  
1 Use the  
/
(arrow) buttons to select the code.  
t u  
After the code is selected, press the RED button to show  
the Test screen. The test will start automatically.  
If a model has more than one Code Set, a message will appear stating “This  
model has more than one Code Set. Please select and test your preferred  
NOTE  
Code Set.” You will need to choose a code set using the  
/
(arrow)  
p q  
buttons and perform the Test option to ensure the correct Code Set has  
been selected.  
2
Press the OK. button  
Input & Mode Key screen will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup and Menu  
60  
Performing the initial setup  
Input & Mode Key  
1
Use the  
/
(arrow) buttons to select the TV input to which  
t u  
the IR device is connected  
.
--- (Appears when Device Type is set to Receiver, Misc  
Audio or Amplifier)  
ANT/CABLE  
Video1  
Video2  
ColorStream HD  
HDMI 1  
HDMI 2  
HDMI 3  
HDMI 4  
PC  
2
3
Press the (arrow) button.  
q
Use the  
/
(arrow) buttons to select device mode key.  
t u  
CABLE/SAT  
BD/DVD  
DVR/VCR  
Audio  
AUX  
4
Press the OK button.  
When Device Type is set to Receiver, Misc Audio or  
Amplifier, the Volume Control screen will appear.  
When Device Type is set to Cable Box, Satellite Box,  
Blu-ray or DVD Player, the Guide Preferences screen  
will appear.  
When Device Type is set to VCR, CD Player or Video  
Accessory, press the OK button on the IR Blaster Setup  
complete screen.  
Support Information screen will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup and Menu  
Performing the initial setup  
61  
Volume Control  
1
Use the  
select:  
/
(arrow) buttons to set up the Volume control to  
t u  
TV (this is the default)  
External  
The Volume + or – and MUTE buttons will control the  
external equipment through the IR blaster.  
2
Press the OK button.  
Press the OK button on the IR Blaster Setup complete screen.  
Support Information screen will appear.  
Guide Preferences  
1
Use the  
/
(arrow) buttons to set up the Guide preferences  
t u  
to select:  
TV MediaGuide  
External Device Guide  
2
Press the (arrow) button to select Interval Time.  
q
0.125 sec  
0.25 sec  
0.375 sec  
0.5 sec  
0.625 sec  
0.75 sec  
0.875 sec  
1 sec  
After the interval time is selected, press the RED button to  
show the Test screen. The test will start automatically.  
3
Press the OK button.  
Press the OK button on the IR Blaster Setup complete screen.  
Support Information screen will appear.  
8
Support Information  
Read through the information, and press the OK button.  
The initial setup is completed.  
Refer to this information if there is a problem and you need to contact  
Customer Support. To find help, the following operation can be performed  
at any time. SETUP button > Get Help > System Information > OK  
button.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup and Menu  
Navigating the menu system  
62  
Navigating the menu system  
To open the menu system, press the SETUP button on the remote  
control.  
< Picture  
Picture  
Picture Mode  
Reset  
Standard  
Sound  
Backlight  
0
100  
0
Options  
Installation  
Network  
Timers  
Contrast  
Brightness  
Color  
0
Tint  
0
Sharpness  
0
Advanced Picture Settings  
Expert Picture Settings  
Display Settings  
Get Help  
(Sample Illustration) Main menu  
When a menu is open, press the  
/
/
/
(arrow) buttons on the  
p q t u  
remote control to move in the corresponding direction.  
To show the setup items or sub menus, press the (arrow) button (or  
u
the OK button).  
To select a highlighted item or save your menu settings, press the  
OK button. (A highlighted menu item appears in a different color in  
the menu.)  
All menus close automatically if no selection is made within  
approximately 60 seconds.  
To close a menu instantly, press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Initial Setup and Menu  
63  
Quick Menu  
Quick Menu  
Quick menu helps you access some options more quickly.  
Press the QUICK button to display the Quick menu and press the  
/
p q  
(arrow) buttons to select an option.  
Quick menu items differ depending on the current mode.  
NOTE  
Quick Menu  
Intel® WiDi  
Picture Mode  
Picture Size  
Item Page  
Sleep Timer  
HDMI CEC Device Control  
Speakers  
Device Information  
Wireless Information  
Interval Time  
Repeat  
Sound  
Picture  
Background Music  
Play List  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 5  
Setting up your TV  
How to navigate the menu  
Press the SETUP button. Select Installation, Main menu,  
Submenu, and then press the OK or EXIT button.  
Changing initial settings  
From Quick Setup:  
1
2
Press the SETUP button.  
Select Installation > Quick Setup, and press the OK button.  
A confirmation message appears.  
3
4
Press the  
/
(arrow) buttons to select Yes.  
t u  
Press the OK button.  
To change settings, see “Initial setup” on page 52.  
Individual settings  
Menu Language  
You can choose from three different menu language settings (English,  
Français, and Español). The TV displays menus and messages in your  
preferred language.  
1
2
3
4
Press the SETUP button.  
Select Installation > Menu Language and press the OK button.  
Press the  
/
(arrow) buttons to select your preferred language.  
p q  
Press the OK button.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting up your TV  
Individual settings  
65  
Country  
You can select the country in which you reside.  
1
2
3
4
Press the SETUP button.  
Select Installation > Country and press the OK button.  
Press the  
/
(arrow) buttons to select the country.  
p q  
Press the OK button.  
Time Zone  
This setting allows you to specify the correct time zone for your region.  
1
2
3
4
Press the SETUP button.  
Select Installation > Time Zone and press the OK button.  
Press  
/
(arrow) buttons to select your time zone.  
p q  
Press the OK button.  
Daylight Saving Time  
1
Press the SETUP button.  
2
Select Installation > Daylight Saving Time and press the OK  
button.  
3
4
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Press the OK button.  
Store / Home Mode  
You can select Store or Home to designate the TV location. Select Home  
for normal home use.  
1
2
3
4
Press the SETUP button.  
Select Installation > Store / Home Mode and press the OK button.  
Press the  
/
(arrow) buttons to select Home or Store.  
p q  
Press the OK button.  
Store Mode is only available if the TV is set to Store Mode at initial setup.  
NOTE  
ANT/CABLE In  
This setting configures the antenna input source for the ANT/CABLE  
terminal.  
1
2
Press the SETUP button.  
Select Installation > Channel Tuning > ANT/CABLE In and  
press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
66  
Storing channels in memory (optional)  
3
4
5
Press the  
/
(arrow) buttons to select Antenna or Cable.  
p q  
Press the OK button  
.
Select Start Scan.  
After scanning is complete, the auto tuning results screen will  
appear.  
6
Press the OK or EXIT button.  
Storing channels in memory (optional)  
To make sure your TV stops only on the channels you want when you press  
the CH  
/
buttons on the remote control or the control panel, store  
p q  
those channels in the TV’s memory.  
Auto Tuning  
You must set up the antenna/cable input source first. See “Initial setup” on  
NOTE  
You can set up the TV to detect all active channels in your area and store  
them in its memory. Then you can manually store or skip individual  
channels from memory.  
Option:  
Description:  
Cable  
Note: If you select Cable, auto tuning deletes previously stored channels  
from memory.  
This setup requires some time, but you do not need to repeat the setup  
unless your cable TV service’s lineup changes significantly.  
To skip an antenna source channel and remove it from memory, set the  
channel to be skipped. See “Skipping channels” on page 67.  
Antenna  
To tune to channels not stored in memory, use buttons 0–9 and the DASH  
button on the remote control.  
NOTE  
1
2
Press the SETUP button.  
Select Installation > Channel Tuning > Auto Tuning, and then  
press the OK button.  
A confirmation screen appears.  
3
Press the OK button to start Auto Tuning or press EXIT button to  
abort.  
The TV cycles through the channels and stores all active channels  
in memory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting up your TV  
67  
buttons.  
Skipping channels  
4
To view the programmed channels, press the CH  
/
p q  
Manual Tuning  
After storing channels in memory, you can manually enter channels if the  
channel number is known.  
1
2
Press the SETUP button.  
Select Installation > Channel Tuning > Manual Tuning, and then  
press the OK button.  
3
Use buttons 0–9 on the remote control to enter the channel number  
(for example, 56).  
4
5
Press the OK button.  
Press the OK button again to begin Manual Tuning.  
The channels found are listed at the bottom of the screen.  
Option:  
ATV  
DTV  
Description:  
Analog channel  
Digital channel  
Skipping channels  
To prevent a channel from being viewed, you can set it to be skipped.  
1
2
Press the SETUP button.  
Select Options > Channel Options and then press the OK button.  
The list of channels appears.  
Channel Options  
Ch  
Type  
Label  
CH-1  
CH-2  
101 - 201  
201  
DTV  
ATV  
DTV  
ATV  
DTV  
ATV  
DTV  
101 - 201  
201  
101 - 201  
201  
101 - 201  
(Sample Image) Channel options  
3
4
5
Press the  
press the  
/
(arrow) buttons to select the Skip column ( ) and  
(arrow) buttons to select a channel to skip.  
t u  
8
/
p q  
Press the OK button.  
The box is selected.  
To clear the selection, press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting up your TV  
Skipping video inputs  
68  
You cannot tune skipped channels using the CH  
buttons 0–9 and the DASH button on the remote control.  
/
buttons. Use  
NOTE  
p q  
Skipping video inputs  
You can set video inputs to be skipped when selecting inputs in the Input  
selection screen.  
To turn on skip  
1
Press the SETUP button.  
2
Select Options > Input Option > Input Labeling and press the  
OK button.  
3
Press the  
/
(arrow) buttons to select the item you wish to skip.  
p q  
Then press the RED button to turn on Skip.  
To turn off skip  
Press the RED button again to turn off Skip.  
Labeling analog TV channels  
1
Press the SETUP button.  
2
Select Options > Channel Options, and then press the OK button.  
The list of channels appears.  
Channel Options  
Ch  
Type  
Label  
CH-1  
CH-2  
101 - 201  
201  
DTV  
ATV  
DTV  
ATV  
DTV  
ATV  
DTV  
101 - 201  
201  
101 - 201  
201  
101 - 201  
(Sample Image) Channel options  
Press the (arrow) buttons to select a channel to label.  
3
4
/
p q  
Press the OK button.  
The Software Keyboard window appears.  
5
6
Input a name using the Software Keyboard, see “Using the software  
Press the GREEN button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting up your TV  
Labeling video inputs  
69  
Labeling video inputs  
The input labels are shown in the input selector and banner displays. You  
can label video inputs according to the devices you have connected to the  
TV.  
1
2
Press the SETUP button.  
Select Options > Input Option > Input Labeling and press the  
OK button.  
3
Press the  
Press the  
/
(arrow) buttons to select the item you wish to label.  
(arrow) buttons to select Receiver, Cable, DVD,  
p q  
/
t u  
Game, PC, Recorder, Satellite, VCR or Blu-ray ™.  
When entering arbitrary characters, press the GREEN button.  
The Software Keyboard window appears.  
Input a name using the Software Keyboard, see “Using the  
4
Repeat Step 3 for other video inputs.  
Configuring shared input  
To set Shared PC Audio  
1
Press the SETUP button.  
2
Select Options > Input Option > PC/HDMI 2 Audio and press the  
OK button.  
3
Press the  
/
(arrow) buttons to select PC or HDMI 2.  
p q  
To apply the setting, switch the input to PC or HDMI 2.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 6  
Basic features  
Tuning Channels  
Tuning to the next programmed channel  
Press the CH  
/
buttons on the remote control or TV control panel.  
p q  
Tuning to a specific channel (programmed or unprogrammed)  
Channel:  
Description:  
Analog  
Use the 0–9 buttons on the remote control. (For example, to select channel  
125, press 1, 2, 5.), and then press the OK button.  
Digital  
Use the 0–9 buttons on the remote control to enter the major channel  
number. (and press the DASH button if needed, (For example, to select  
digital channel 125- 1, press 1, 2, 5, –, 1.)), and then press the OK button.  
Using Channel Return  
You can switch between two channels without entering a channel number  
each time. This feature also works for external inputs.  
1
2
Select the first channel you want to view.  
Select a second channel using the Channel Number buttons (and  
press the DASH button if needed).  
3
Each time you press the CH RTN button, the TV switches between  
the last two channels that were tuned.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Basic features  
Selecting the video input to view  
71  
Selecting the video input to view  
To select the video input to view:  
1
2
Press the INPUT button.  
Change the input:  
Press 0–7.  
Repeatedly press the  
/
(arrow) button and then press the  
p q  
OK button.  
Repeatedly press the INPUT button.  
Inputs  
0
1
2
3
4
5
6
7
ANT/CABLE  
Video 1  
Video 2 / ColorStream HD  
HDMI 1  
HDMI 2  
HDMI 3  
HDMI 4  
PC  
You can label the video input sources according to the specific devices  
you have connected to the TV, see “Labeling video inputs” on page  
69.  
NOTE  
You can skip sources, see “Skipping video inputs” on page 68.  
Inputs that are set to be skipped will be skipped when selecting by  
repeatedly pressing the INPUT button or the  
/
(arrow) buttons.  
p q  
You can select inputs that are set to be skipped using the number  
buttons.  
If one or more HDMICEC devices are connected to an HDMIinput,  
the icon appears in the input selector. In this case, the label, see  
“Labeling video inputs” on page 69 will not appear in the input  
selector.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
72  
Using closed captions  
To select an HDMICEC device:  
1
2
Press the  
/
(arrow) buttons to select an HDMIinput.  
p q  
Press the (arrow) button. The list of HDMICEC devices for  
u
that input appears.  
3
4
If the input has multiple HDMICEC devices, press the  
(arrow) buttons to select a device.  
/
p q  
Press the OK button.  
Using closed captions  
To turn on the closed caption mode:  
1
2
3
4
Press the SETUP button.  
Select Options > Closed Captions.  
Press the OK button.  
Press the  
/
(arrow) buttons to select Closed Captions Display  
p q  
and press the OK button.  
Press the (arrow) buttons to select On or Off.  
5
/
p q  
If Closed Captions Display is set to Off, Analog CC Mode and Digital CC  
Settings will be not available.  
NOTE  
Analog CC mode  
The closed caption mode has two options:  
Mode:  
Description:  
Captions  
Displays the dialogue, narration, and sound effects of TV programs  
and videos that are closed captioned (usually marked “CC” in program  
guides).  
Text  
Displays information not related to the current program, such as weather  
or stock data (when provided by individual stations).  
To view captions or text:  
1
2
3
4
Press the SETUP button.  
Select Options > Closed Captions.  
Press the OK button.  
Press the  
/
(arrow) buttons to select Analog CC Mode and  
p q  
press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Using closed captions  
73  
To view captions:  
Press the  
/
(arrow) buttons to highlight CC1, CC2, CC3, or  
p q  
CC4.  
Giant pandas eat leaves.  
(Sample Illustration) Captions  
If the program or video you have selected is not closed captioned, no  
captions will be displayed.  
NOTE  
To view text:  
Press the  
/
(arrow) buttons to highlight T1, T2, T3, or T4.  
p q  
WORLD WEATHER  
Temps  
Current  
Weather  
F
C
Clear  
Cloudy  
Clear  
Cloudy  
Rain  
LONDON  
MOSCOW  
PARIS  
51  
57  
53  
66  
65  
11  
14  
12  
19  
18  
ROME  
TOKYO  
(Sample Illustration) Captions - text  
If text is not available in your area, a black rectangle may appear on the  
screen. You can remove this rectangle by setting Closed Captions Display  
to Off.  
NOTE  
NOTE  
A closed caption signal may not be displayed when a videotape is dubbed,  
signal reception is weak, or signal reception is non-standard.  
Digital CC settings  
You can customize the closed caption display characteristics.  
These settings are available for digital channels only.  
You cannot set Caption Text and Background as the same color.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
Using closed captions  
74  
Mode:  
Description:  
Caption Size  
Caption Text Type  
Auto, Small, Standard, Large  
Auto, Default, Mono (with Serif), Prop. (with Serif), Mono  
(without Serif), Prop. (without Serif), Casual, Cursive, Small  
Capitals  
Caption Text Edge  
Auto, None, Raised, Depressed, Uniform, Left Drop Shadow,  
Right Drop Shadow  
Caption Text Color  
Text Foreground Opacity  
Background Color  
Text Background Opacity  
Caption Text Edge Color  
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan  
Auto, Transparent, Translucent, Flashing, Solid  
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan  
Auto, Transparent, Translucent, Flashing, Solid  
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan  
To customize the closed captions:  
1
2
3
4
Press the SETUP button.  
Select Options > Closed Captions.  
Press the OK button.  
Press the  
/
(arrow) buttons to select Digital CC Settings.and  
p q  
then press the OK button.  
Press the (arrow) buttons to select a characteristic and then  
5
/
p q  
press the OK button.  
Press the (arrow) buttons to select the format for that  
/
p q  
characteristic.  
Using the Closed Caption button  
If you press the CC button when an analog channel is tuned or from an  
external input (480i signal from the video input):  
The CC bar will appear and will display the options, CC1-4, T1-4.  
If you press the CC button when a digital channel is tuned:  
The CC bar will appear and will display the available caption  
options for that channel or service.  
Setting the PIN code  
A PIN code is necessary for some menus.  
The Parental Control and Locks menu is grayed out if no PIN has been set.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Using closed captions  
75  
Entering a new PIN code  
1
2
3
4
Press the SETUP button.  
Select Options > Parental PIN Setup.  
Press the OK button.  
Use the number buttons to enter a 4-digit number, and then confirm  
the code.  
The PIN code cannot be set to “0000”.  
NOTE  
Changing or deleting your PIN code  
1
2
3
4
5
Press the SETUP button.  
Select Options > Parental PIN Setup.  
Press the OK button.  
Use the number buttons to enter your 4-digit PIN code.  
Select Change PIN or Delete PIN, and then press the OK button.  
The PIN code cannot be set to “0000”.  
NOTE  
If you delete the PIN code, the settings of Parental Controls and Locks  
are reset.  
Forgotten PIN code  
1
2
3
4
5
6
Press the SETUP button.  
Select Options > Parental PIN Setup.  
Press the OK button.  
Press the INFO button 4 times quickly.  
Select Change PIN and press the OK button.  
Enter a new PIN code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Basic features  
Using parental controls  
76  
Using parental controls  
Blocking TV programs and movies by rating (V-Chip)  
Some TV programs and movies include signals that classify the content  
of the program (as unsuitable for younger viewers). The V-Chip feature  
in this TV detects the signals and blocks the programs according to the  
ratings you select.  
The V-Chip feature in this TV supports the U.S. V-Chip system only.  
NOTE  
1
2
3
4
5
Press the SETUP button.  
Select Options > Parental Control and Locks.  
Press the OK button.  
Enter your 4-digit PIN code.  
Press the  
/
(arrow) buttons to select Enable Rating Blocking  
p q  
and press the OK button.  
6
7
Press the  
/
(arrow) buttons to select On.  
p q  
Press the  
/
(arrow) buttons to select Edit Rating Limits, and  
p q  
then press the OK button.  
The Edit Rating Limits screen appears.  
8
9
Press the  
/
/
/
(arrow) buttons.  
p q t u  
Press the OK button to select a level of blocking.  
A box with an “X” indicates a rating that will be blocked. As you  
highlight a rating, the rating’s definition appears at the bottom of  
the screen.  
10 Select Done and then press the OK button.  
This feature will not be available if no PIN code is set.  
NOTE  
Downloading an additional rating system  
An additional rating system may be available for use in selectively  
blocking TV programs and movies.  
The currently tuned station must be receiving a digital signal before an  
additional rating system can be downloaded.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Basic features  
Using parental controls  
77  
1
2
3
4
Press the SETUP button.  
Select Options > Parental Control and Locks.  
Press the OK button.  
Enter your 4-digit PIN code.  
The Parental Control and Locks screen appears.  
5
Press the  
/
(arrow) buttons to select Enable Rating Blocking  
p q  
and press the OK button.  
6
7
Press the  
/
(arrow) buttons to select On.  
p q  
Press the  
/
(arrow) buttons to select Edit Rating Limits, and  
p q  
then press the OK button.  
The Edit Rating Limits screen appears.  
8
Select Alt RS, and then press the OK button.  
The Edit Alternate Ratings screen appears.  
The Alt RS button is only available if an additional rating system is  
currently available.  
NOTE  
The download may take several minutes.  
The information displayed on the Alternate Ratings screen depends on  
the configuration of the additional rating system available at the time  
of download.  
9
Press the  
/
/
/
(arrow) buttons.  
p q t u  
10 Press the OK button to select the desired level of blocking. A box  
with an “X” indicates the rating that will be blocked.  
You can only download the additional rating system once. You cannot  
download updates if they become available.  
The additional rating system is not designed, transmitted, or controlled  
by the TV or Toshiba, nor is the availability of an additional rating  
system determined or controlled by Toshiba.  
NOTE  
Similarly, the rating of programs in an additional rating system is not  
determined, transmitted, or controlled by the TV or Toshiba.  
The additional rating system is an evolving technology; therefore,  
availability, content, and format may vary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic features  
Using parental controls  
78  
Rating system  
Independent rating system for broadcasters:  
Ratings:  
Description and Content themes:  
TV-MA  
Mature Audience Only (This program is specifically designed to be viewed  
by adults and therefore may be unsuitable for children under 17. L) Crude or  
indecent language S) Explicit sexual activity V) Graphic violence  
Parents Strongly Cautioned (This program contains some material that  
many parents would find unsuitable for children under 14 years of age.)  
D) Intensely suggestive dialogue L) Strong, coarse language S) Intense  
sexual situations V) Intense violence  
TV-14  
TV-PG  
TV-G  
Parental Guidance Suggested (This program contains material parents  
may find unsuitable for younger children.) D) Some suggestive dialogue L)  
Infrequent coarse language S) Some sexual situations V) Moderate violence  
General Audience (Most parents would find this program suitable for all  
ages.)  
TV-Y7,  
TV-Y7FV  
Directed to Older Children (This program is designed for children age 7 and  
above.  
NOTE: Programs in which fantasy violence may be more intense or more  
combative than other programs in this category are designated TV-Y7FV.)  
All Children (This program is designed to be appropriate for all children.)  
TV-Y  
Independent rating system for movies  
Ratings:  
X
Description and Content themes:  
X-rated (For adults only)  
NC-17  
R
PG-13  
Not intended for anyone 17 and under  
Restricted (Under 17 requires accompanying parent or adult)  
Parents Strongly Cautioned (Some material may be inappropriate for children  
under 13)  
PG  
G
Parents Strongly Cautioned (Some material may be inappropriate for children  
under 13)  
General Audience (Appropriate for all ages)  
Indication other than rating system  
Display:  
Description:  
NONE  
(No rating appears)  
The program is rated None.  
No rating information is provided.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic features  
Locking specific channels  
79  
If you place an “X” in the box next to “Rated “None””, programs rated “None”  
or “Not Rated” will be blocked; Programs that do not provide any rating  
information will not be blocked.  
NOTE  
Displaying ratings  
To display the rating of the program you are watching, press the INFO  
button on the remote control.  
Unlocking programs  
If you try to tune to a program that exceeds the rating limits you have set,  
the TV will enter program lock mode and a warning message will appear  
on screen. Follow the instructions to temporarily unlock the program.  
Locking specific channels  
A channel that is configured as Locked cannot be viewed unless the PIN  
code is entered first, see “Setting the PIN code” on page 74.  
1
2
3
Press the SETUP button.  
Select Options > Channel Options.  
Press the OK button.  
The list of channels appears.  
Channel Options  
Ch  
Type  
Label  
CH-1  
CH-2  
101 - 201  
201  
DTV  
ATV  
DTV  
ATV  
DTV  
ATV  
DTV  
101 - 201  
201  
101 - 201  
201  
101 - 201  
(Sample Illustration) Channel options  
Press the (arrow) button and then press the  
4
/
(arrow) buttons  
u
p q  
to select a channel in the lock column, and then press the OK  
button.  
5
You must enter your PIN code to lock channels.  
If no PIN code has been set, a warning appears. See, “Setting the PIN code”  
NOTE  
6
The box is selected. To clear the selection, press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Basic features  
Locking specific channels  
80  
Locking video inputs  
You can lock video inputs. You cannot view the input sources until you  
unlock the inputs by entering the PIN code.  
1
2
3
4
5
Press the SETUP button.  
Select Options > Parental Control and Locks.  
Press the OK button.  
Enter your 4-digit PIN code.  
Press the  
/
(arrow) buttons to select Input Lock and press the  
p q  
OK button.  
Press the  
6
/
(arrow) buttons to select Video or Off.  
p q  
Mode:  
Description:  
Video  
Locks Video 1, Video 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3,  
HDMI 4, and PC.  
Off  
Unlocks all video inputs.  
Setting a time limit for games  
You can use the GameTimer® to set a time limit for playing a video game.  
When the time expires, the TV locks all external inputs.  
1
2
3
4
5
6
Press the SETUP button.  
Select Timers > GameTimer.  
Press the OK button.  
Enter your 4-digit PIN code.  
Press the  
/
(arrow) buttons to select 30, 60, 90, or 120 minutes.  
p q  
To cancel the timer, select Off.  
To deactivate the Input Lock once the GameTimer® has activated it:  
Set the Input Lock to Off, see “Locking video inputs” on page 80.  
A message appears when 10 minutes, 3 minutes, and 1 minute are  
remaining.  
NOTE  
If the TV loses power with time remaining, the TV will enter Input  
Lock mode when power is restored (as if the GameTimer had been  
activated). You must deactivate the Input Lock, see “Locking video  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Using HDMICEC Control  
81  
Locking the control panel  
You can lock the control panel to prevent your settings from being  
changed accidentally (by children, for example). When Panel Lock is set  
to On, none of the controls on the control panel operate except POWER.  
1
2
3
Press the SETUP button.  
Select Options > Panel Lock and press the OK button.  
Press the  
/
(arrow) buttons to select On.  
p q  
When Panel Lock is set to On, “Panel Lock” appears on screen when the  
buttons on the TV control panel are pressed. Unless the TV is in "Active  
Standby", then control panel POWER button can turn on the TV  
NOTE  
To unlock the control panel:  
Select Off in Step 3 above.  
Using HDMICEC Control  
This feature uses CEC technology and allows you to control Toshiba  
HDMICEC compatible devices from the TV remote control via HDMI™  
connection.  
When Enable HDMI CEC Control in the HDMI CEC Control Setup  
menu is set to On, the following HDMICEC Control functions are  
enabled.  
To set HDMICEC Control Setup  
1
Press the SETUP button.  
2
Select Options > HDMI CEC Control Setup and press the OK  
button.  
3
Press the  
/
(arrow) buttons to select Enable HDMI CEC  
p q  
Control and press the OK button.  
Press the (arrow) buttons to select On.  
4
/
p q  
If you set Enable HDMI CEC Control to Off, the other items under HDMI  
CEC Control Setup will be grayed out.  
NOTE  
5
Press the  
button.  
/
(arrow) buttons to select an item and press the OK  
p q  
Press the  
/
(arrow) buttons to select On or the desired mode:  
p q  
TV Auto Power: On/Off  
Auto Standby: On/Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Using HDMICEC Control  
82  
Amplifier Control: On/Off  
Initial Speaker Setting: TV Speakers/Amplifier  
These functions depend on the connected devices.  
NOTE  
Controlling HDMICEC playback devices  
With your TV’s remote control, you can control the connected HDMI™  
CEC playback device (DVD player, etc.) you are watching.  
Button:  
u
v
Description:  
Begins playback  
Stops playback  
Pauses the picture during play or record mode  
Skips forward.  
W
z
Skips backward.  
Z
uu  
Fast forward  
tt  
Rewind/reverse  
Menu navigation, etc.  
Enters content with a menu  
Controls various operation  
p q t u  
OK  
RED, GREEN,  
YELLOW, BLUE  
0–9 buttons  
Controls various operation, e.g. tuning to a specific channel for tuner  
device.  
Channel  
/
Changes to the next available channel up or down in the sequence  
p q  
These functions depend on the connected devices.  
NOTE  
HDMICEC Player Control menu functions  
1
2
3
Press the QUICK button to open the Quick menu.  
Select HDMI CEC Device Control, and then press the OK button.  
Press the  
/
(arrow) buttons to select the item you want to  
p q  
control, and then press the OK button.  
Item:  
Description:  
Power  
Root Menu  
Contents Menu  
Setup Menu  
Audio  
Turns the selected device On and Off  
Accesses the selected device’s top menu  
Accesses the content list when the OK button is pressed  
Accesses the device’s setup menu  
Select the divice's sound  
Eject  
Ejects the device's media  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
Using HDMICEC Control  
83  
These functions depend on the connected devices.  
NOTE  
The HDMICEC Device Control item is not available under the following  
conditions:  
A non-HDMIinput is selected  
The Enable HDMI CEC Control item is set to Off  
The connected HDMICEC device is not a playback, recording, or  
tuner device  
HDMICEC Control input source selection  
If an HDMICEC device with HDMIswitching capability (e.g. an  
amplifier) is connected to the HDMIinput, you can select another  
HDMICEC device that is connected to the master HDMIdevice.  
Use the INPUT button on the remote control or the control panel, see  
Adjusting the amplifier’s audio  
Using the TV’s remote control, you can adjust or mute the sound volume  
of your audio system.  
The VOL (+ -) buttons adjust the volume level.  
The MUTE button turns off the sound.  
Press SETUP button.  
1
2
Select Options > HDMI CEC Control Setup and press the OK  
button.  
3
Press the  
/
(arrow) buttons to select Initial Speaker Setting  
p q  
and press the OK button.  
Press the (arrow) buttons to select Amplifier.  
4
/
p q  
Confirm that a connected HDMICEC device (such as DVD player, etc.) is  
selected for the Amplifier input source.  
NOTE  
You can also use this function when the audio system is connected to  
NOTE  
the TV’s DIGITAL AUDIO OUT terminal (not HDMIconnection).  
Select a digital audio input mode on the amplifier.  
These functions depend on the device connected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Viewing the HDMIsignal information  
84  
Other HDMICEC Control functions  
When Enable HDMI CEC Control and all items in the HDMICEC  
Control Setup menu are set to On, the following functions will be  
enabled:  
Item:  
TV Auto Power  
Auto Standby  
Description:  
If an HDMICEC device is turned on, the TV turns on automatically.  
If the TV is turned off, it will send a message to turn off all of the  
HDMICEC devices connected to the TV.  
Amplifier Control  
If Amplifier Control is set to On, you can adjust the sound volume  
or turn off the sound using the remote control.  
Initial Speaker  
Setting  
With this item, you can set your audio output preference to the TV  
Speakers or the Amplifier. When this item is set to Amplifier, the remote  
control can be used to adjust or mute the volume of the audio. This  
item will not be available and set to TV Speakers automatically unless  
an HDMICEC compatible audio system is connected.  
When you turn on the audio system, change its input source, or adjust the  
sound volume, the sound will be output from the audio system’s speakers  
even if TV Speakers has been selected. Turn the TV off and on again to  
output the sound from the TV speakers.  
NOTE  
Viewing the HDMIsignal information  
1
Press the SETUP button.  
2
Select Options > HDMI Information Display and press the OK  
button.  
3
4
Press the  
/
(arrow) buttons to select On.  
p q  
Press the INFO button.  
HDMIInformation is shown (Resolution, Scan Type, Frame  
Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma  
Format), and the normal banner and signal information banner  
appear.  
The signal information banner will appear when this feature is set to  
NOTE  
On and you watch an HDMIinput and press the INFO button. The  
signal information will disappear after 60 seconds.  
If you press the INFO button when this feature is set to Off, only the  
normal banner will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Using your computer with the TV  
85  
Using your computer with the TV  
Adjusting the image  
If the edges of the picture are hidden, readjust Horizontal Position and  
Vertical Position. If the picture is affected by interference, readjust Clock  
Phase and Sampling Clock.  
1
2
3
4
Press the SETUP button.  
Select Picture > Display Settings and press the OK button.  
Press the  
/
(arrow) buttons to select PC Settings, and then  
p q  
press the OK button.  
If a computer is not connected or there is no PC input signal, this menu will  
not be available.  
NOTE  
5
Press the  
button.  
/
(arrow) buttons to select an item and press the OK  
p q  
6
Press the  
/
(arrow) buttons to make adjustments.  
t u  
The screen is disrupted momentarily when adjusting the PC settings.This is  
not a sign of malfunction.  
NOTE  
Mode:  
Description:  
Moves the picture left/right  
Moves the picture up/down  
Helps to reduce noise and sharpen Within 32 from center*  
the picture  
Adjustment Range  
Within 10 from center*  
Within 10 from center*  
Horizontal Position  
Vertical Position  
Clock Phase  
Sampling Clocks  
Helps to reduce noise and minimize Within 5 from center*  
periodic vertical stripes on the screen  
*The default settings and/or adjustment ranges vary depending on the input signal  
format.  
To reset the PC Settings:  
Select Reset, and then press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Setting the timer to turn on the TV  
86  
Setting the computer audio  
You can output sound from your computer when connecting it to your TV,  
using the AUDIO IN terminal and PC audio cable.  
1
2
3
Press the SETUP button.  
Select Options > Input Options and press the OK button.  
Press the  
/
(arrow) buttons to select PC/HDMI 2 Audio and  
p q  
press the OK button.  
Press the (arrow) buttons to select PC.  
4
/
p q  
To apply the setting, switch the input to PC or HDMI 2.  
NOTE  
Setting the timer to turn on the TV  
You can set the on timer to turn on the TV to a preset channel or input at a  
preset time.  
To activate the timer:  
1
2
3
4
Press the SETUP button.  
Select Timers > On Timer.  
Press the OK button.  
Press the  
/
(arrow) buttons to select Enable On Timer and  
p q  
press the OK button.  
Press the (arrow) buttons to select On.  
5
/
t u  
If the Enable On Timer is set to Off, other menus under On Timer  
cannot be changed.  
NOTE  
It can take the TV approximately 60 seconds to turn on through the ON  
TIMER feature.  
To set the timer:  
1
2
3
4
Press the SETUP button.  
Select Timers > On Timer.  
Press the OK button.  
Set these options to your preference:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Basic features  
Setting the sleep timer  
87  
Item:  
Input  
Channel  
Volume  
Description:  
Video input source  
Channel to view  
Volume level  
Time until Power On Desired length of time until the TV turns on:  
minimum=00:10, maximum=12:00  
Press  
/
(arrow) buttons  
t u  
Use the number buttons  
5
Select Done, and then press the OK button.  
If you do not operate the TV for 1 hour after it is powered on by the On  
Timer feature, it turns off.  
NOTE  
To cancel the timer:  
1
2
3
4
Press the SETUP button.  
Select Timers > On Timer.  
Press the OK button.  
Press the  
/
(arrow) buttons to select Enable On Timer and  
p q  
press the OK button.  
Press the (arrow) buttons to select Off.  
5
/
t u  
Setting the sleep timer  
You can set the TV to turn off after a specific amount of time  
(maximum = 12 hours).  
Using the remote control:  
1
2
Press the SLEEP button.  
Set the amount of time until the TV turns off.  
Repeatedly press the SLEEP button to increase the time.  
Press the  
/
(arrow) buttons to increase or decrease the time.  
p q  
Using the on-screen menus:  
1
2
3
4
Press the SETUP button.  
Select Timers > Sleep Timer.  
Press the OK button.  
Select the amount of time until the TV turns off.  
Use the number buttons.  
Press the  
/
(arrow) buttons to increase or decrease the time.  
p q  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
Setting No Signal Power Down  
88  
If a power failure occurs, the sleep timer setting may be cleared.  
NOTE  
To display the time remaining until the TV turns off, press the SLEEP  
button.  
To cancel the sleep timer, press the SLEEP button repeatedly or press the  
/
(arrow) buttons until it is set to 0 minutes.  
p q  
When the following features are set, the feature that is set for the nearest  
time will function.  
NOTE  
Sleep Timer  
Auto shutdown after 1 hour of inactivity (after powering on by On  
Timer)  
No signal auto power off (after approximately 15 minutes of no signal)  
Setting No Signal Power Down  
When an input's setting in this feature is set to On, The TV will  
automatically turn itself off after about 15 minutes if no signal is detected.  
You can change each input's setting to Off: ANT/CABLE, Video 1, Video  
2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC.  
1
2
Press the SETUP button.  
Select Options > Power Management > No Signal Power Down,  
and then press the OK button.  
3
Press the  
/
(arrow) buttons to select the item you want to  
p q  
change and press the OK button.  
Press the (arrow) buttons to select On or Off.  
4
5
/
p q  
Press the EXIT button.  
Default setting for each input is On.  
A warning message will appear 1 minute before turning off.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
Setting TV Power On Control  
89  
Setting TV Power On Control  
When the TV is connected to the home network via Wireless LAN with  
the TV Power On Control in Enabled, your TV can be turned on by  
control from Apps.  
1
2
Press the SETUP button.  
Select Options > Power Management > TV Power On Control  
and press the OK button.  
3
Press the  
/
(arrow) buttons to select Enabled (Active Standby).  
p q  
Depending on the device connected to the home network, it may take a  
while for the TV to turn on.  
Depending on the device connected to the home network, this feature  
may not work.  
If the unencrypted Wireless Setup is done, this feature can not be  
used.  
The power consumption during Active Standby is more than it during  
Normal Standby.  
NOTE  
After the change from Power On state to Active Standby, there may be a  
period of several seconds when the TV does not receive the operation  
from a remote control or external apparatus.  
Displaying TV status information  
To display TV status information, press the INFO button.  
The following information will be displayed (if applicable):  
Current input (ANT/CABLE, Video, etc.)  
Either “CABLE” (for cable TV) or “ANT” (for over-the-air  
broadcasts), if ANT/CABLE is the current input  
Channel number (if in ANT/CABLE mode)  
Input label (if set)  
Digital signal strength indicator (for ATSC/QAM signals only)  
Stereo, Mono, or SAP audio status (when in HDMIinput mode,  
PCM)  
Video resolution  
Aspect ratio of incoming video signal (4:3 or 16:9)  
V-Chip rating status (if available)  
GameTimer (if set)  
Channel Label (if set or received)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic features  
90  
Viewing support information  
To close the screen, press the INFO button again.  
The following additional information (only available for ANT/CABLE  
input) will display for digital channels (if applicable):  
Title  
Duration  
Detailed description  
Next program’s information  
Viewing support information  
1
2
3
Press the SETUP button.  
Select Get Help > System Information.  
Press the OK button to display support information containing Web/  
Customer service numbers for US, Canada, and Mexico.  
Resetting to Factory Defaults  
You can reset all settings and channels to Factory Defaults.  
1
2
3
Press the SETUP button.  
Select Installation > Reset TV.  
Enter your PIN code (if a PIN code has been set).  
A confirmation screen appears.  
4
Select Yes, and then press the OK button.  
The TV will turn off automatically.  
To cancel the reset:  
Press the  
button.  
/
(arrow) buttons to select No, and then press the OK  
t u  
Power failure  
If power is lost while you are watching the TV, the Last Mode Memory  
feature automatically turns on the TV when power is restored.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 7  
Picture and Sound  
Controls  
Selecting the picture size  
You can view many program formats in several picture sizes— Native, 4:3,  
Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by  
Dot.  
The picture size illustrations are examples only. The format of the  
image (in any of the picture sizes) depends on the format of the signal  
you are currently watching. Select the picture size that displays the  
current program in the way that looks best to you.  
Using these functions to change the picture size (i.e., changing the  
height/width ratio) for any purpose other than your private viewing  
may be prohibited under the Copyright Laws of the United States and  
other countries, and may subject you to civil and criminal liability.  
NOTE  
Some picture sizes may not be available depending on the format of  
the signal being received.  
If you select a TheaterWide® picture size, the top and bottom edges of  
the picture (including subtitles or captions) may be hidden. To view  
these edges, adjust the Picture Position or try viewing the program in  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
92  
Selecting the picture size  
You can save separate picture size preferences for each input on your TV.  
To select the picture size using the Quick menu:  
1
2
3
Press the QUICK button to open the Quick menu.  
Select Picture Size, and then press the OK button.  
Press the  
/
(arrow) buttons to select the Picture Size, and then  
p q  
press the OK button.  
To select the picture size using the remote control :  
1
2
Press the PIC SIZE button.  
While the Picture Size screen is open, repeatedly press the PIC  
SIZE button.  
Native Mode™  
This applies pixel-for-pixel image reproductions of Full HD content and  
eliminating overscanning; you see all of the original picture within the  
screen and eliminate scaling artifacts for a more accurate image.  
These settings are for viewing in 480i (HDMI), 480p (HDMI), 720p,  
1080i, and 1080p signal programs.  
(Sample Illustration) Picture size - Native  
If receiving a 1080i, 1080p, 720p, 480i (HDMI), or 480p (HDMI)  
signal program, the video is scaled to display the entire picture  
within the borders of the screen (i.e. no overscanning).  
This is especially useful for external HD sources such as DVHS  
movies, video games, or computer graphics.  
None of the picture is hidden.  
This mode is supported only for HDMI(1080i, 1080p, 720p, 480i,  
NOTE  
and 480p), ColorStream® (1080i and 720p), and ANT/CABLE (digital)  
inputs (1080i, 1080p, and 720p).  
Depending on the input signal, the picture’s border may be hidden,  
displayed in black, or noisy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Picture and Sound Controls  
Selecting the picture size  
93  
4:3  
(Sample Illustration) Picture size - 4:3  
Some program formats will display with sidebars and/or bars at the top  
and bottom.  
Full  
This setting is for viewing in the 16:9 (480i, 480p) source programs only.  
(Sample Illustration) Picture size - Full 16:9  
If receiving a squeezed 4:3 format program, the picture is stretched  
horizontally to fill the width of the screen but not stretched vertically.  
This setting is for viewing in the 1080i, 1080p, and 720p program source.  
(Sample Illustration) Picture size - Full  
The edges of the picture may be hidden.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
Selecting the picture size  
94  
TheaterWide1  
This setting is for viewing in 4:3 format programs.  
(Sample Illustration) Picture size - TheaterWide1  
The center of the picture remains close to its original proportions, but the  
left and right edges are stretched horizontally to fill the screen.  
TheaterWide2  
This setting is for viewing letter box programs.  
A B C D E F G - - - - - - - - - - - - - - - -  
(Sample Illustration) Picture size - TheaterWide2, letter box  
The picture’s top and bottom edges may be hidden*.  
TheaterWide3  
This setting is for viewing letter box programs with subtitles.  
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -  
(Sample Illustration) Picture size - TheaterWide3, letter box with  
subtitles  
The picture’s top and bottom edges are hidden*.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
95  
Scrolling the picture  
Normal  
This setting is for viewing SVGA, XGA, WXGA, and SXGA sources.  
(Sample Illustration) Picture size - Normal  
This size is a non-stretched display. Some input signal formats will  
display with sidebars and/or bars at the top and bottom.  
Dot by Dot  
This setting is for viewing SVGA, XGA, WXGA, and SXGA sources.  
(Sample Illustration) Picture size - Dot by Dot  
“Dot by Dot” is a non-scaling display. Depending on the input signal  
format, the picture appears with sidebars and/or bars at the top and  
bottom, for example, SVGA input source.  
* To view the hidden areas (such as subtitles or captions), see “Scrolling  
Scrolling the picture  
If the edges of the picture are hidden, you can adjust the image’s position.  
You can adjust the picture position when the picture size is set to  
TheaterWide2 or TheaterWide3.  
When viewing Cloud TV, MediaShare, or Internet content this feature  
is not available.  
NOTE  
1
2
Press the SETUP button.  
Select Picture > Display Settings > Picture Position and press the  
OK button.  
3
4
Press the  
/
(arrow) buttons to select Vertical Position and press  
p q  
the OK button.  
Press the  
/
(arrow) buttons to make the appropriate adjustments.  
t u  
The adjustment range is from -5 to +10.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Picture and Sound Controls  
Using the Auto Aspect feature  
96  
Using the Auto Aspect feature  
When this feature is set to On, the TV will automatically select the picture  
size when one of the following input sources is received:  
480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input  
480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/75 Hz) signal from  
the HDMI1/2/3/4 input  
The auto aspect ratio feature is not applicable to the PC input.  
NOTE  
1
2
Press the SETUP button.  
Select Picture > Display Settings > Auto Aspect and press the OK  
button.  
3
4
Press the  
/
(arrow) buttons to select On.  
p q  
Press the EXIT button.  
Using the 4:3 Stretch  
When 4:3 Stretch is activated, the TV displays 4:3 programs as a full-  
screen picture.  
This feature is available when Auto Aspect is set to On.  
NOTE  
1
2
Press the SETUP button.  
Select Picture > Display Settings > 4:3 Stretch and press the OK  
button.  
3
4
Press the  
/
(arrow) buttons to select On.  
p q  
Press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
97  
Adjusting the picture  
Adjusting the picture  
Selecting the picture mode  
You can select your desired picture settings from the modes described  
below.  
Mode:  
Description:  
AutoView®  
Automatically adjusts multiple picture settings including Brightness,  
Contrast, Gamma, and Sharpness based on ambient room light conditions  
and incoming picture content to create the best possible picture settings  
without any manual adjustment.  
Dynamic  
Maximizes Contrast, Color Saturation, Sharpness, Gray Scale and  
Brightness to create more vivid and dynamic images  
Standard picture settings  
Standard  
Movie  
Lower contrast for a darkened room  
Game  
Optimized for playing video games by displaying the images in their  
purest form (4:4:4) without the loss of color information. The result is  
superior image quality and shorter signal to screen time for a faster gaming  
experience.  
PC  
Optimized for viewing your personal computer  
PC mode is available for HDMIand PC inputs only (not displayed for  
other input sources).  
NOTE  
Game mode is not available in ANT/CABLE input.  
1
2
3
4
Press the SETUP button.  
Select Picture > Picture Mode and press the OK button.  
Press the  
/
(arrow) buttons to select a mode.  
p q  
Press the EXIT button.  
The picture mode you select affects the current input only. You can select a  
different picture mode for each input.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
Adjusting the picture  
98  
Adjusting the picture quality  
The adjustments you make to picture quality under a picture mode are  
saved to that picture mode.  
Selection  
Backlight*  
Contrast  
Brightness  
Color  
Press (  
Darker  
Lower  
Darker  
Paler  
)
t
Press (  
Lighter  
Higher  
Lighter  
Deeper  
)
u
Tint  
Sharpness  
Reddish  
Softer  
Greenish  
Sharper  
*Backlight: Adjusts the brightness of the entire screen. When in video mode and  
no signal is input, this selection is set to 0. (Settings are stored in memory.)  
Some settings cannot be adjusted when the picture mode is set to  
AutoView.  
NOTE  
To adjust the picture quality:  
1
2
3
Press the SETUP button.  
Select Picture and press the OK button.  
Press the  
/
(arrow) buttons to select the setting you would  
p q  
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or  
Sharpness).  
4
5
6
Press the (arrow) button.  
u
Press the  
/
(arrow) buttons to adjust the setting.  
t u  
Press the EXIT button.  
Any picture settings that you adjust affect the current input only.  
You can adjust the picture quality separately for each input.  
Depending on a Sharpness value, the Edge Enhancer effect may be  
reduced.  
NOTE  
To reset to the factory defaults:  
1
2
3
Press the SETUP button.  
Select Picture > Reset.  
Press the OK button.  
A confirmation screen appears.  
4
Press the  
button.  
/
(arrow) buttons to select Yes, and then press the OK  
t u  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
Using the advanced picture settings features  
99  
Using the advanced picture settings features  
Some of the Advanced Picture Settings features will not be available for  
adjustment when the Picture Mode is set to AutoView.  
NOTE  
Edge Enhancer  
If the Edge Enhancer set to On, the clarity levels can be adjusted  
automatically.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Edge Enhancer and  
press the OK button.  
3
4
Press the  
/
(arrow) buttons to select On.  
p q  
Press the EXIT button.  
If the picture mode is set to AutoView, Edge Enhancer is not  
available.  
NOTE  
This feature may not work properly depending on the content.  
Noise may appear on the image depending on the device connected to  
the TV (e.g. a device with a specific enhancer function).  
Dynamic Contrast  
Dynamic Contrast detects changes in picture quality that affect the  
appearance of your contrast settings and then automatically adjusts the  
video.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Dynamic Contrast  
and press the OK button.  
3
4
Press the  
Off.  
/
(arrow) buttons to select High, Middle, Low, or  
p q  
Press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Picture and Sound Controls  
100  
Using the advanced picture settings features  
DynaLight®  
The DynaLight® dynamic backlight control monitors the brightness of  
each video frame and automatically adjusts backlight intensity based  
on the content to create higher dynamic contrast, for deeper blacks and  
increased depth.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > DynaLight and  
press the OK button.  
3
4
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Press the EXIT button.  
ClearScan®  
ClearScan® 120Hz technology utilizes advanced backlight control with  
image synchronization to double the television refresh rate for clearer fast  
motion video. This technology is ideal for watching action movies, sports  
and video games. (For 32/39/50L4300U models)  
ClearScan® 240Hz uses both frame interpolation technology and  
advanced backlight control with image synchronization to quadruple the  
TV refresh rate for an even clearer fast motion video. (For 58L4300U and  
50/58/65L7300U models)  
For the 32/39/50L4300U models, the ClearScan® 120Hz technology  
is always on and operates in conjunction with Cinema Mode. On the  
58L4300U and the 50/58/65L7300U models, the ClearScan® 240Hz  
technology is a selectable option from the menu.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > ClearScan and  
press the OK button.  
3
Press the  
/
(arrow) buttons to select Cinema, Smooth,  
p q  
Standard, or Off.  
4
Press the EXIT button.  
If the picture mode is set to Game or PC mode, this feature is automatically  
not available.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
Using the advanced picture settings features  
101  
Cinema Mode (32/39/50L4300U models)  
This feature provides smoother motion and a crisper image.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Cinema Mode and  
press the OK button.  
3
4
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Press the EXIT button.  
If the picture mode is set to Game or PC mode, this feature is automatically  
set and is not available.  
NOTE  
MPEG NR  
The MPEG noise reduction feature allows you to reduce visible  
interference caused by MPEG compression.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Noise Reduction  
and press the OK button.  
3
4
Press the  
/
(arrow) buttons to select MPEG NR and press OK.  
p q  
Press the  
/
(arrow) buttons to select Low, Middle, High, or  
p q  
Off.  
5
Press the EXIT button.  
If the picture mode is set to Game or PC, this feature is not available.  
NOTE  
UltraClear DNR  
DNR is a Dynamic Noise Reduction technology that filters out video  
noise without decreasing picture sharpness for clean, crystal-clear images.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Noise Reduction  
and press the OK button.  
3
4
5
Press the  
button.  
/
(arrow) buttons to select DNR and press the OK  
p q  
Press the  
or Off.  
/
(arrow) buttons to select Low, Middle, High, Auto,  
p q  
Press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Picture and Sound Controls  
Using the advanced picture settings features  
102  
The differences may not always be noticeable. For the best results, use  
lower settings, as picture quality may be greatly reduced if the setting is too  
high.  
NOTE  
If the picture mode is set to Game or PC, this feature is not available.  
Ambient Light Sensor  
When the ambient light function of Ambient Light Sensor is set to On,  
the TV optimizes the backlighting levels to suit ambient light conditions.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Auto Brightness  
Sensor and press the OK button.  
3
4
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Press the EXIT button.  
When the picture mode is set to AutoView®, this feature is automatically  
set to On.  
NOTE  
ColorMaster™  
The ColorMaster™ feature allows you to adjust standard colors.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > ColorMaster and  
press the OK button.  
3
4
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Press the EXIT button.  
Base Color Adjustment  
When ColorMaster™ is set to On, the list of base colors appears.  
You can select a base color to adjust.  
1
2
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Base Color  
Adjustment.  
3
4
5
Press the OK button.  
The Base Color Adjustment screen appears.  
Press the  
button.  
/
(arrow) buttons to select a color. Press (arrow)  
p q  
u
Press the  
/
(arrow) buttons to select Hue, Saturation, or  
t u  
Brightness.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Picture and Sound Controls  
103  
Setting the expert picture settings  
6
7
Press the  
/
(arrow) buttons to adjust the setting.  
p q  
Repeat Steps 4 through 6 to adjust other colors. To reset the  
adjustments to the factory defaults, select Reset on the screen, and  
then press the OK button. (A confirmation screen appears. Press  
/
t
(arrow) buttons to select Yes, and then press the OK button.)  
u
Color temperature  
1
Press the SETUP button.  
2
Select Picture > Advanced Picture Settings > Color Temperature  
and press the OK button.  
3
Select Color Temperature and press the OK button. Press the  
/
p
(arrow) buttons to select Cool, Medium, or Warm.  
q
4
5
Press the OK button.  
Press the (arrow) buttons to select the Red Level, Green  
/
p q  
Level, or Blue Level.  
Press the (arrow) button.  
6
7
u
Press the  
/
(arrow) buttons to adjust the color level. The  
t u  
adjustment range is -10 (less of selected color) to +10 (more of  
selected color).  
8
Press the EXIT button.  
This feature is not available in Standard and Movie mode.  
NOTE  
Resetting advanced picture settings to the factory default  
1
2
3
Press the SETUP button.  
Select Picture > Advanced Picture Settings > Reset.  
Press the OK button.  
A confirmation screen appears.  
4
Select Yes, and then press the OK button.  
Setting the expert picture settings  
This feature is only available in Standard and Movie mode.  
NOTE  
Test Pattern  
When the test pattern is on screen, you can navigate the Picture submenus  
without removing the image. When you move to a non-Picture menu, or  
close the menus, regular video will be restored.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Picture and Sound Controls  
104  
Setting the expert picture settings  
1
2
Press the SETUP button.  
Select Picture > Expert Picture Settings > Test Pattern and press  
the OK button.  
3
4
Press the  
/
(arrow) buttons to select On.  
p q  
Adjust picture settings.  
RGB Filter  
This feature individually enables or disables the red, green, and blue  
components of the picture to allow for more accurate adjustment of each  
color.  
1
2
Press the SETUP button.  
Select Picture > Expert Picture Settings > RGB Filter and press  
the OK button.  
3
Press the  
adjust.  
/
(arrow) buttons to select Red, Green, or Blue to  
p q  
4
5
Press the (arrow) button.  
u
Press the  
button.  
/
(arrow) buttons to select On, and then press the OK  
p q  
6
Press the (arrow) button to select Color or Tint, press  
/
q
t u  
(arrow) button to adjust.  
7
Press the EXIT button.  
It is not possible to turn off all three colors simultaneously.  
NOTE  
White Balance  
Window Display  
This feature displays the Window Pattern to adjust the white balance.  
1
2
Press the SETUP button.  
Select Picture > Expert Picture Settings > White Balance and  
press the OK button.  
3
Press the  
/
(arrow) buttons to select Window Display and press  
p q  
the OK button.  
Press the  
4
5
/
(arrow) buttons to select On.  
p q  
Adjust the picture settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
105  
Adjusting the audio  
Setting Type  
You can adjust the white balance setting.  
2P White Balance:  
1
2
Press the SETUP button.  
Select Picture > Expert Picture Settings > White Balance >  
Setting Type and press the OK button.  
3
4
5
Press the  
button.  
/
(arrow) buttons to select 2P and the press the OK  
p q  
Press the  
press the OK button.  
/
(arrow) buttons to select 2P White Balance and  
p q  
Press the (arrow) buttons to select Red-Offset, Green-Offset,  
/
p q  
Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain.  
Press the (arrow) button.  
6
7
u
Press the  
/
(arrow) buttons to adjust.  
t u  
10P White Balance:  
1
2
Press the SETUP button.  
Select Picture > Expert Picture Settings > White Balance >  
Setting Type and press the OK button.  
3
4
Press the  
button.  
/
(arrow) buttons to select 10P and the press the OK  
p q  
Press the  
/
(arrow) buttons to select 10P White Balance and  
p q  
press the OK button.  
5
6
7
Press the (arrow) buttons to select IRE, Red, Green, or Blue.  
/
p q  
Press the (arrow) button.  
u
Press the  
/
(arrow) buttons to adjust.  
t u  
Adjusting the audio  
Muting the sound  
Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute)  
the sound. Each time you press the MUTE button, the mute mode  
changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.  
If you modify items in the Sound menu while Mute is active, Mute is  
cancelled.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
Adjusting the audio  
106  
Selecting stereo/SAP broadcasts  
The MTS (multi-channel TV sound) feature is only available for analog  
signals on the ANT/CABLE input. When the TV receives a stereo or SAP  
(second audio program) broadcast, the icon STEREO or SAP appears on  
screen when the INFO button is pressed.  
To listen in stereo sound:  
1
2
3
4
Press the SETUP button.  
Select Sound > MTS and press the OK button.  
Press the  
/
(arrow) buttons to select Stereo.  
p q  
Press the EXIT button.  
You can typically leave the TV in Stereo mode because it outputs the  
type of sound being broadcast (stereo or monaural).  
NOTE  
If the sound is noisy, select Mono.  
If there is no sound in SAP mode, select Stereo.  
Adjusting the audio balance  
You can adjust the audio balance.  
1
2
3
4
Press the SETUP button.  
Select Sound > Balance and press the OK button.  
Press the  
/
(arrow) buttons to adjust the balance.  
t u  
Press the EXIT button.  
Adjusting the range  
You can adjust bass and treble.  
1
2
3
4
5
Press the SETUP button.  
Select Sound > Bass or Treble.  
Press the OK button.  
Press the  
/
(arrow) buttons to adjust the range.  
t u  
Press the EXIT button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
107  
Adjusting the audio  
TV Speakers On/Off  
This feature allows you to turn the TV speakers off when connecting the  
audio system.  
1
2
3
Press the SETUP button.  
Select Sound > TV Speakers and press the OK button.  
Press the  
/
(arrow) buttons to select On or Off.  
p q  
To turn on the built-in speakers:  
Choose On in step 3 above.  
1
Setting the Primary Audio Language  
You can set the Primary Audio Language of the digital broadcast.  
1
2
Press the SETUP button.  
Select Sound > Primary Audio Language and press the OK  
button.  
3
4
Press the  
Español.  
/
(arrow) buttons to select English, Français, or  
p q  
Press the EXIT button.  
Selecting the optical audio output format  
You can select the optical audio output format when you connect a  
Dolby® Digital decoder or other digital audio systems to the TV’s  
DIGITAL AUDIO OUT terminal.  
Audio Format  
1
Press the SETUP button.  
2
Select Sound > Digital Audio Output > Audio Format and press  
the OK button.  
3
4
Press the  
/
(arrow) buttons to select Auto or PCM.  
p q  
Press the EXIT button.  
Audio Delay  
1
Press the SETUP button.  
2
Select Sound > Digital Audio Output > Audio Delay and press the  
OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Picture and Sound Controls  
108  
Adjusting the audio  
3
4
Press the  
/
(arrow) buttons to select Auto or Manual.  
p q  
Auto:  
This mode automatically adjusts the audio timing to meet  
the video timing.  
The time lag might be large between the image and sound  
depending on the connected equipment (amplifier etc.). In  
that case, select Manual.  
Manual: You can manually adjust the audio signal timing to meet  
the video signal timing.  
Press the EXIT button.  
Delay Adjustment  
1
Press the SETUP button.  
2
Select Sound > Digital Audio Output > Delay Adjustment and  
press the OK button.  
3
4
Press the  
/
(arrow) buttons to adjust the audio signal timing (0 –  
t u  
250ms) to meet the video signal timing.  
Press the EXIT button.  
This feature is grayed out when Audio Delay is in Auto.  
NOTE  
A time lag will occur when the video signal or audio signal is changed.  
Adjust the timing accordingly.  
When adjusting the timing, turn down the volume of the AV equipment  
used as far as possible.  
Depending on the equipment, noise etc. may occur when the signal is  
changed.  
Depending on the connected equipment (amplifier, etc.), adjustment  
may not be possible.  
When the optical audio output setting (Auto PCM) is changed, it  
t
may be necessary to adjust the timing again.  
Do not use other than for audio output from the AV amplifier, etc.  
(Malfunction may occur)  
Using the Dolby® Digital Dynamic Range Control feature  
You can further compress Dolby® Digital and Dolby® Digital Plus  
dynamic range so you can switch from digital to analog broadcasts at the  
same dynamic range.  
1
2
3
Press the SETUP button.  
Select Sound > Dynamic Range Control and press the OK button.  
Press the  
/
(arrow) buttons to select On.  
p q  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
109  
Adjusting the audio  
This feature is available when Dolby® Digital or Dolby® Digital Plus is input  
to the TV in the following situations:  
NOTE  
When tuned to a digital RF channel  
When an HDMIinput is used  
This feature is automatically set to Off when Dynamic Volume (Audyssey  
Dynamic Volume®) is set to Day or Night.  
This feature will also affect Digital Audio Output when the optical audio  
output format is set to PCM.  
Audyssey Premium Television™  
These televisions use a suite of technologies for better sound including:  
Audyssey EQ®—provides clear, accurate and natural sound right  
out of the box. This technology ensures you enjoy your audio  
experience as much as your video.  
Audyssey ABX™—technology uses sophisticated driver analysis  
and low frequency monitoring to extend the range and bass of small  
speakers. This enables the system to produce lower frequencies than  
would be possible with a traditional system of the same size.  
Audyssey Dynamic Volume®—automatically adjusts volume to  
provide a consistent sound level between television programs,  
commercials, and between the loud and soft passages of movies.  
Audyssey Volume Extension®—doubles the volume capability in  
small speakers while blocking distortion so your TV gets loud and  
still sounds great.  
Day/Night Modes—automatically keeps the volume of the TV at  
the perfect level for day or night.  
Wall/Table Modes—automatically keeps the volume at the perfect  
level for television mounted on a wall or located on a table-top.  
Using Audyssey EQ® for Wall Mounted or Table-top TVs  
This feature automatically keeps the volume at the perfect level for  
television mounted on a wall or located on a table-top.  
1
2
Press the SETUP button.  
Select Sound > Audyssey Premium Television > TV Mounting  
and press the OK button.  
3
Press the  
/
(arrow) buttons to select Wall or Table.  
p q  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture and Sound Controls  
110  
Adjusting the audio  
Using Audyssey Dynamic Volume ®  
This feature provides a consistent sound volume between television  
programs, commercials, and between the loud and soft passages of  
movies.  
1
2
Press the SETUP button.  
Select Sound > Audyssey Premium Television > Dynamic  
Volume and press the OK button.  
3
Press the  
/
(arrow) buttons to select Night, Day, or Off.  
p q  
If Dynamic Range Control is set to On, this feature is automatically set  
to Off.  
This feature does not affect the audio signal output from the DIGITAL  
AUDIO OUT terminal.  
NOTE  
Audyssey ABX™  
Audyssey ABX™ technology uses sophisticated driver analysis and low  
frequency monitoring to extend the range and bass of small speakers.  
To turn on Audyssey ABX™:  
1
2
Press the SETUP button.  
Select Sound > Audyssey Premium Television > Audyssey ABX  
and press the OK button.  
3
Press the  
/
(arrow) buttons to select Off, Low, or High.  
p q  
Audyssey EQ® and Audyssey Volume Extension® are default settings that  
are set to On.  
Using the surround sound feature  
Surround settings help to create a thrilling surround sound experience  
with deep, rich bass from stereo sound sources. Your TV’s audio will  
sound fuller, richer, and wider.  
Press the SETUP button. Select Sound > Surround, and then select  
On or Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 8  
Advanced features  
Using your home network  
This TV can share videos, music, and photos across your home  
network and other connected products through the MediaShare  
feature. In order to do this, you will have to configure the network  
If you want to use your home network with an Internet connection,  
you will have to configure the network settings on your TV.  
If necessary, change the network settings, see “Setting up the  
If you use Internet services, see the following note before use.  
Third party Internet services are not provided by Toshiba, may change or  
be discontinued at any time, and may be subject to third party restrictions.  
Toshiba makes no warranties, representations, or assurances about the  
content, availability, or functionality of third party content or services.  
Third party internet services may require the creation of a separate  
account through a computer with internet access, and payment of one-  
time and/or recurring charges.  
Certain features currently not available in Canada/Mexico.  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Using your home network  
112  
When using a Wireless network connection  
Wireless LAN and your Health:  
Wireless LAN products, like other radio devices, emit radio frequency  
electromagnetic energy. However, the level of energy emitted by Wireless  
LAN devices is much less than the electromagnetic energy emitted by  
wireless devices like mobile phones.  
Because Wireless LAN products operate within the guidelines found  
in radio frequency safety standards and recommendations, Toshiba  
believes Wireless LAN is safe for use by consumers. These standards  
and recommendations reflect the consensus of the scientific community  
and result from deliberations of panels and committees of scientists who  
continually review and interpret the extensive research literature.  
In some situations or environments, the use of Wireless LAN may be  
restricted by the proprietor of the building or responsible representatives  
of the organization. Such restrictions may apply in environments where  
the risk of interference to other devices or services is perceived or  
identified as harmful.  
If you are uncertain of the policy that applies to the use of wireless  
devices in a specific organization or environment, you are encouraged to  
ask for authorization to use the Wireless LAN device prior to turning on  
the equipment.  
Using the TV in a wireless LAN environment:  
It is recommended to use IEEE 802.11a or IEEE 802.11n on 5 GHz  
for audio and SD video streaming.  
It is recommended to use IEEE 802.11n on 5 GHz for HD video  
streaming.  
It is recommended that the encoding rate of video content be 20  
Mbps or less.  
It is not recommended to use 2.4 GHz for audio and video  
streaming.  
Content playback may be interrupted by surrounding interference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Setting up the Network  
113  
Setting up the Network  
You can select the Network Type.  
1
2
Press the SETUP button.  
Select Network > Network Setup > Connection Type and press  
the OK button.  
3
4
Press the  
/
(arrow) buttons to select Wired or Wireless.  
p q  
Press the OK button.  
118.  
If you select Wireless, see the next section.  
Wireless Setup  
Continued AP (Access Point) connection is not guaranteed.  
Connection may be lost while watching TV.  
NOTE  
There are three methods for wireless setup:  
Easy Setup (WPS)  
If AP supports WPS, this can be used.  
WPS is a standard designed to simplify the connection of  
wireless LAN equipment and the setup of network security  
features.  
Assisted Setup (setup using the AP's notification information)  
Network Name, Authentication, and Encryption are decided based  
on information from the AP. You need to manually set the Security  
Key.  
Manual Setup  
Requires manually entering all settings.  
In order to secure your home network, it is strongly recommended that  
you use a wireless access point with encryption.  
NOTE  
When Encryption is set to “None”, data transmitted over a wireless  
LAN is not securely protected. Unauthorized users may access your  
data and network without appropriate security measures. Selecting an  
encryption setting from your Toshiba TV and using a secure network  
for wireless LAN transmissions may help avoid unauthorized access  
to your important data and/or TV. Toshiba disclaims any and all  
responsibility or liability resulting from any wireless transmissions  
over the Internet through your Toshiba TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Setting up the Network  
114  
Easy Setup using PBC (Push button configuration)  
1
Press the SETUP button.  
2
Select Network > Network Setup > Wireless Setup and press the  
OK button  
3
Press the  
/
(arrow) buttons to select Easy Setup and press the  
p q  
OK button.  
Press the  
4
5
/
(arrow) buttons to select PBC.  
p q  
Press the (arrow) button to select Start Scan, and then press the  
q
OK button.  
6
7
Following the on-screen instructions, push the appropriate button on  
your AP.  
When a screen reporting that “the setup has succeeded” appears,  
press the OK button.  
To cancel searching for the AP:  
Press the BACK button while searching for the AP. A message  
appears. Press the  
/
(arrow) buttons to select Yes, and then press  
t u  
the OK button.  
Easy Setup using PIN (Personal Identification Number)  
1
Press the SETUP button.  
2
Select Network > Network Setup > Wireless Setup and press the  
OK button.  
3
Press the  
/
(arrow) buttons to select Easy Setup and press the  
p q  
OK button.  
Press the  
4
5
/
(arrow) buttons to select PIN.  
p q  
Press the (arrow) button to select Start Scan, and then press the  
q
OK button.  
The Scan screen appears.  
6
7
Enter the PIN displayed on this screen into your computer or AP.  
Press the  
/
(arrow) buttons to select the desired AP, and then  
p q  
press the OK button.  
Check the MAC address on the label or in the manual of the AP and select  
an AP.  
NOTE  
8
When a screen reporting that “the setup succeeded” appears, press  
the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Setting up the Network  
115  
To cancel searching for the AP:  
Press the BACK button while searching for the AP. A message  
appears. Press the  
/
(arrow) buttons to select Yes, and then press  
t u  
the OK button.  
Assisted Setup  
1
Press the SETUP button.  
2
Select Network > Network Setup > Wireless Setup and press the  
OK button.  
3
4
Press the  
/
(arrow) buttons to select Assisted Setup and press  
p q  
the OK button.  
Press the  
/
(arrow) buttons to select the desired AP, and then  
p q  
press the OK button.  
Check the MAC address on the label or in the manual of the AP and select  
an AP.  
NOTE  
5
6
Select Security Key, and then press the OK button.  
The Software Keyboard appears.  
Input the Security Key using the Software Keyboard. For more  
7
To save your settings, press the GREEN button.  
The Security Key must adhere to the following conditions:  
NOTE  
TKIP/AES: 8-63 ASCII or 64 Hex characters  
WEP: 5 or 13 ASCII or 10 or 26 Hex characters  
8
Select Done, and then press the OK button.  
Settings are not saved if the BACK button is pressed before Done is  
selected.  
NOTE  
Manual Setup  
1
Press the SETUP button.  
2
Select Network > Network Setup > Wireless Setup and press the  
OK button.  
3
Press the  
/
(arrow) buttons to select Manual Setup, and then  
p q  
press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
116  
Setting up the Network  
4
5
Press the  
/
(arrow) buttons to select Network Name, and then  
p q  
press the OK button.  
The Software Keyboard window appears.  
Input the Network Name using the Software Keyboard. For more  
6
7
To save your settings, press the GREEN button.  
Press the  
/
(arrow) buttons to select Authentication and press  
p q  
the OK button.  
Press the  
/
(arrow) buttons to select Open System, Shared  
p q  
Key, WPA-PSK, or WPA2- PSK.  
8
Press the  
/
(arrow) buttons to select Encryption and press the  
p q  
OK button.  
Press the  
/
(arrow) buttons to select None, WEP, TKIP, or  
p q  
AES.  
Certain encryption types are only compatible with specific authentication  
types.  
NOTE  
When Authentication is Open System and Shared Key, only WEP or  
None are compatible.  
When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES  
are compatible.  
When incompatible Authentication/Encryption pairings are attempted, a  
warning message will be displayed, and no connection attempt will be  
made until the incompatibility is resolved.  
9
Press the  
/
(arrow) buttons to select Security Key, and then  
p q  
press the OK button.  
The Software Keyboard window appears.  
10 Input the Security Key using the Software Keyboard. For more  
11 To save your settings, press the GREEN button.  
This item is grayed out when Encryption is set to None.  
NOTE  
12 Select Done, and then press the OK button.  
When Encryption is set to None, a message appears.  
13 Press the  
/
(arrow) buttons to select Yes, and then press the OK  
t u  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Setting up the Network  
117  
Settings are not saved if the BACK button is pressed before Done is  
selected.  
NOTE  
Wireless Information  
The settings configured in Wireless Setup can be confirmed.  
1
2
3
Press the QUICK button.  
Select Wireless Information, and then press the OK button.  
Press the RED button to check the availability of surrounding APs.  
A Wireless Information screen appears when a connection is  
successfully made.  
Item:  
Description:  
Status  
The message, “Connected” appears when the TV is connected to  
the AP  
The message, “Disconnected” appears when the TV is disconnected  
from the AP  
Signal  
Speed  
Mode  
Connection signal strength with the AP (STRONG/MEDIUM/WEAK)  
The link speed with the AP  
Working mode (11a, 11b, 11g, 11n)  
The channel in use (1-165)  
SSID set  
Channel  
Network name  
Authentication  
Encryption  
Authentication set  
Encryption set  
Security key  
Security Key set  
AP MAC address  
TV MAC address  
DHCP  
The AP’s MAC address appears when the TV is connected to the AP  
The TV’s MAC address  
The message, “Enabled” appears when you use DHCP.  
The message, “Disabled” appears when you do not use DHCP.  
The TV’s IP address  
Value of the Subnet Mask  
Default GATEWAY’s address  
IP address  
Subnet Mask  
Default Gateway  
DNS  
DNS’s address  
Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or  
TKIP, the Speed value might be low. We recommend that the Encryption  
setting are changed to AES (Under manual setup).  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Setting up the Network  
118  
Advanced Network Setup  
When manually setting the IP Address, set Auto Setup to Off.  
NOTE  
IP Address Setup  
The settings in Auto Setup are linked to those selected in the DNS Setup  
menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu  
will also be set to On.  
NOTE  
Auto Setup:  
1
2
Press the SETUP button.  
Select Network > Network Setup > Advanced Network Setup  
and press the OK button.  
3
4
Press the  
/
(arrow) buttons to select IPAddress Setup, and  
p q  
then press the OK button.  
Press the  
/
(arrow) buttons to select Auto Setup and press the  
p q  
OK button.  
Press the  
5
/
(arrow) buttons to select On.  
p q  
Other items are grayed out when Auto Setup is set to On.  
NOTE  
Manual Setup:  
1
2
Press the SETUP button.  
Select Network > Network Setup > Advanced Network Setup  
and press the OK button.  
3
4
Press the  
/
(arrow) buttons to select IPAddress Setup, and  
p q  
then press the OK button.  
Press the  
p q  
OK button.  
/
(arrow) buttons to select Auto Setup and press the  
5
6
7
Press the  
Press the  
Press the  
/
(arrow) buttons to select Off.  
p q  
/
(arrow) buttons to select IPAddress.  
p q  
/
(arrow) buttons to select the IPAddress field and  
t u  
use the 0-9 buttons to enter in a digit. Press the (arrow) button  
u
to select the subsequent fields. To save the setting, press the OK  
button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Setting up the Network  
119  
IP address field numbers must be between 0 and 255. If you input an  
incompatible number and press the OK button, the field number will be  
reset to the previous value.  
NOTE  
8
9
Press the  
/
(arrow) buttons to highlight Subnet Mask, and edit  
p q  
in the same way as IP Address.  
Press the (arrow) buttons to highlight Default Gateway, and  
/
p q  
edit in the same way as IP Address.  
If you manually set the IP address, you must not use the same IP address  
with any other device. The IP address you use should be a private address.  
If you do not know the correct values to use, contact your network  
administrator or internet service provider.  
NOTE  
DNS Setup  
When the DHCP function of the router connected to this TV is Off, set  
Auto Setup to Off, and manually set the DNS address(es).  
NOTE  
Your Internet Service Provider should have provided these to you.  
The settings in Auto Setup are linked to those selected in the IP  
Address Setup menu. If Auto Setup is set to On, then Auto Setup in the  
IP Address Setup menu will also be set to On.  
Auto setup:  
1
2
Press the SETUP button.  
Select Network > Network Setup > Advanced Network Setup  
and press the OK button.  
3
4
Press the  
/
(arrow) buttons to select DNS Setup, and then press  
(arrow) buttons to select Auto Setup and press the  
(arrow) buttons to select On.  
p q  
the OK button.  
Press the  
/
p q  
OK button.  
Press the  
5
/
p q  
Other items are grayed out when Auto Setup is set to On.  
NOTE  
Manual setup:  
1
2
Press the SETUP button.  
Select Network > Network Setup > Advanced Network Setup  
and press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
120  
Setting up the Network  
3
4
Press the  
/
(arrow) buttons to select DNS Setup, and then press  
p q  
the OK button.  
Press the  
/
(arrow) buttons to select Auto Setup and press the  
p q  
OK button.  
5
6
7
Press the  
Press the  
Press the  
/
(arrow) buttons to select Off.  
p q  
/
(arrow) buttons to select Primary DNS Address.  
p q  
/
(arrow) buttons to select the field you want to  
t u  
change, and then use the number buttons to input the Primary DNS  
Address. To save the setting, press the OK button.  
DNS address field numbers must be between 0 and 255. If you input an  
incompatible number and press the OK button, the field number will be  
reset to the previous value.  
NOTE  
8
Press the  
/
(arrow) buttons to select Secondary DNS Address,  
p q  
and edit in the same way as Primary DNS Address.  
MAC Address  
You can view the fixed MAC address for the TV.  
1
2
Press the SETUP button.  
Select Network > Network Setup > Advanced Network Setup  
and press the OK button.  
3
Press the  
/
(arrow) buttons to select MAC Address, and then  
p q  
press the OK button.  
Network Connection Test  
This function checks Internet connectivity.  
1
2
Press the SETUP button.  
Select Network > Network Setup > Network Connection Test,  
and then press the OK button.  
A message appears to indicate whether the connection was  
successful or not.  
Favorable Network Connection Test results do not guarantee an Internet  
Connection. Depending on the situation, some Internet features may not be  
available.  
NOTE  
To cancel Network Connection Test, press the EXIT button while  
searching for the Internet connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Using the software keyboard  
121  
Using the software keyboard  
You can enter text using the Software Keyboard.  
The Software Keyboard window will appear when you press the OK  
button on a field that accepts character input.  
When using the SmartTV features, software keyboard availability depends  
on the Internet service being accessed.  
NOTE  
3
Done  
4
1
2
5
6
9
8 7  
(Sample Illustration) Software keyboard  
Item:  
Description:  
1
2
3
Text entry field  
Symbol  
Open  
Press the OK button on this field, caret moving.  
To switch Symbol character.  
Display the Multi Line Input field. If it does not work,the button  
will be grayed out.  
4
Done  
Saves whatever text was entered, exits the software keyboard  
and enters that text into the appropriate text field on the previous  
screen.  
5
6
Delete  
Number pad  
Deletes one character to the left of the cursor  
Inputs numbers. In keypad, these keys are used to select a  
character for entry.  
7
8
9
Line Break  
To enter the Line Break.  
Switch Language Display the Switch Keyboard Language Popup.  
Shift To shift.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the software keyboard  
122  
Enter text using the software keyboard  
1
2
3
4
Highlight the desired character on the on-screen software keyboard.  
Press the OK button.  
Repeat Step 1 and 2 until you have entered all desired text.  
Select Done or press the GREEN button to save your settings and  
return to the previous screen.  
If the BACK button is pressed, changes are not saved and the software  
keyboard window is closed.  
NOTE  
Input operation on the remote control:  
Item:  
OK  
0-9  
Description:  
Inputs the selected character  
These keys are used to select a character for entry.  
Moves the character highlight  
Deletes one character to the left of the cursor  
Done  
/
/
/
p q t u  
RED  
GREEN  
YELLOW  
BLUE  
Shortcut key for Shift  
To display the help  
BACK  
Closes the Software Keyboard window without saving changes  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Performing a Software Upgrade  
123  
Performing a Software Upgrade  
TOSHIBA may offer upgrades for the TV's software in the future.  
The TV's software is upgraded via the Network.  
An Internet connection is required.  
Before downloading software:  
NOTE  
1
Configure your TV to connect to the Internet.  
You will not be able to use the TV set while performing the upgrade.  
NOTE  
Do not turn off the TV during the upgrade.  
By upgrading, the factory default values may be changed.  
2
3
4
Press the SETUP button.  
Select Get Help > Software Upgrade.  
Press the OK button.  
The Network Upgrade screen appears.  
5
Press the OK button.  
If the network is not available, a warning message appears.  
NOTE  
6
After a successful download, the TV software upgrade will start  
automatically.  
Viewing the Software Licenses  
The Licenses for the software used in this TV are available for viewing.  
1
2
3
Press the SETUP button.  
Select Get Help > Software Licenses.  
Press the OK button.  
A screen appears displaying all the licensing information required  
for the television’s software.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Using Intel® WiDi  
124  
Using Intel® WiDi  
Intel® Wireless Display (Intel® WiDi) is supported on this TV. Toshiba has  
also included peer-to-peer wireless technologies to allow direct wireless  
connection between the TV and Intel® WiDi equipped PC or mobile  
device. If your PC or mobile device has Intel® WiDi, the Toshiba Cloud  
TVs allow you to display the small screen content on the big screen  
quickly and easily.  
1
2
Press the QUICK button to open the Quick Menu.  
Press the  
(arrow) buttons to select Intel® WiDi and then press  
/
p q  
the OK button.  
A prompt will appear on the screen when Connection Type is set to  
Wireless. Select Yes.  
3
4
Launch the Intel® WiDi software on your device and select “scan for  
available adaptors”.  
Intel® WiDi device name and ID list will then be displayed on the  
device screen.  
Select the TV which you wish to connect to.  
“Connecting” will be shown on the TV.  
Connecting your PC to the TV the first time  
When selecting the Toshiba TV for the first time, a 4-digit or 8-digit  
code will appear on your TV screen. This code needs to be inputted  
into your computer to authenticate the connection.  
If authentication has already taken place  
“Please Wait” will appear on screen.  
5
After the Intel® WiDi connection is complete, the TV screen will  
mirror the content shown on the device screen.  
When connecting Intel® WiDi, device must have power turned on.  
When the TV Network Settings are set to Wireless and Intel® WiDi  
NOTE  
software is starting up, other TV applications cannot be used.  
Intel® WiDi device name of the TV can be changed from the Intel®  
WiDi software.  
To exit Intel® WiDi:  
Exit Intel® Wireless Display by pushing the disconnect button on Intel®  
WiDi software on the device or by pressing the EXIT button on the TV  
remote control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using Intel® WiDi  
125  
If the device has been inactive for some time, the Intel® WiDi connection  
will be disconnected automatically.  
NOTE  
Changing the Intel® WiDi Device Name  
The TV's Intel® WiDi device name can be changed.  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > Intel® WiDi Setup and  
press the OK button.  
3
4
5
Press the  
and press the OK button.  
Select the Intel® WiDi Device Name and press the OK button.  
The Software Keyboard window will appear.  
Input the Intel® WiDi device name by using the software keyboard.  
/
(arrow) buttons to select Intel® WiDi Device Name  
p q  
Press the GREEN button.  
6
Select Done and press the OK button to save your setting.  
Device List  
Device List displays a list of MAC addresses for previously connected  
device that have been connected before. The maximum number that can  
be stored is 20.  
If the list run out of space, the least-recently-used MAC address will be  
deleted and the new MAC address added automatically.  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > Intel® WiDi Setup and  
press the OK button.  
3
Press the  
/
(arrow) buttons to select Device List and press the  
p q  
OK button.  
Device List will appear.  
The registered device can be deleted one by one by pressing Red button  
in the List.  
When doing so the following text can be seen “Do you want to  
unregister this device? Yes/No” (default cursor is “No”).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service  
126  
Using the Cloud TV Service  
Toshiba's universal portal for internet content and services. (services are  
dependent on country).  
You need to connect to the Internet before using this feature, see “Setting  
NOTE  
1
2
Press the  
button.  
The menu screen of the Cloud TV service is displayed.  
Press the  
p q t u  
and press the OK button.  
/
/
/
(arrow) buttons to select a Cloud TV service,  
Using the Cloud TV Service features  
You need to connect to the Internet before using this feature, see  
NOTE  
Certain services may not be currently available in your area.  
User registration or login may be required to use some services.  
Third party Internet services are not provided by Toshiba, may change  
or be discontinued at any time and may be subject to Internet service  
provider restrictions. Toshiba makes no warranties, representations,  
or assurances about the content, availability or functionality of third-  
party content or services. Use of third party Internet services may  
require the creation of a separate account through a computer with  
Internet access and/or payment of one-time and/or recurring charges  
and membership. Not all third party services may be available on or  
compatible with this product. In order to experience the full suggested  
capabilities of this product, fully-compatible devices may be required.  
If the display of the date and time is wrong, try to turn off the TV, and  
turn it on again.  
The menu items for features like the Apps may change in the upgrade  
process.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
127  
eMANUAL  
The eMANUAL provides on-screen, context-sensitive, instructions that  
describe the TV features.  
To access the eManual, press the eMANUAL button on the remote  
control and select "eManual". Or you can access the eManual through  
the icon on the Cloud TV Portal pages.  
Featured apps  
With easier content discovery, Cloud TV puts you closer than ever to  
the things you love— like Netflix® and Hulu Plus®, along with video on  
demand, broadcast programming, the Web, even music, photos and videos  
on your home network.  
Apps will vary by country and availability may change in the future with  
respect to current apps.  
NOTE  
Netflix®  
Watching movies with Netflix®  
1
Press the NETFLIX button on the remote control and select the  
Netflix® icon.  
2
Follow the on-screen instructions.  
After having activated Netflix® player and prepared an Instant Queue,  
movies and TV episodes in your Instant Queue will appear on the TV  
screen. Select the desired content using the remote control.  
The resolution of video content streamed from Netflix® varies  
NOTE  
depending on the communication speed and bit-rate and is controlled  
by Netflix®.  
Future upgrades can change the screens and messages displayed in  
the Netflix® feature.  
Netflix® is supported in the U.S. and Canada, and may not be available  
in other countries or regions.  
To close Netflix®, press the EXIT button.  
To confirm the Netflix ESN (Electronic Serial Number):  
1
2
Press the SETUP button.  
Select Network > Smart Apps Setup > Netflix Setup and press the  
OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
128  
Using the Cloud TV Service features  
3
Press the  
/
(arrow) buttons to select ESN, and then press the  
p q  
OK button.  
The Netflix ESN screen appears.  
To deactivate your device:  
1
2
Press the SETUP button.  
Select Network > Smart Apps Setup > Netflix Setup and press the  
OK button.  
3
4
Press the  
/
(arrow) buttons to select Deactivation, and then  
p q  
press the OK button.  
Press the  
button.  
/
(arrow) buttons to select Yes, and then press the OK  
t u  
VUDU™ HD Movies and VUDU™ Apps  
VUDU™ HD Movies and VUDU™ Apps offer on-demand service that  
offers high definition movies on the Web.  
1
2
Press the  
button.  
(arrow) buttons to select VUDU, and then press the  
Press the  
/
t u  
OK button.  
Use of VUDU™ requires a working broadband Internet connection (1  
to 2 Mbps for SD video, 2.25 to 4.5 Mbps for HD video, and 4.5 to 9  
Mbps for HDX video).  
NOTE  
The message "Buffering..." will display if the speed of your Internet  
connection can not keep up with the speed of the streaming content  
from VUDU™.  
To close VUDU, press the EXIT button.  
To deactivate your device:  
1
2
3
4
Press the SETUP button.  
Select Network > Smart Apps Setup > VUDU Deactivation.  
Press the OK button.  
Press the  
button.  
/
(arrow) buttons to select Yes, and then press the OK  
t u  
If the VUDU™ icons are not shown in the Cloud TV, you may need to  
update the TV firmware. You can access VUDU™ through the web browser.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service features  
129  
Internet  
Open/Web Browser  
The open/web browser with HTML5 video and audio codecs which allow  
you to explore the web the way you want. Search for, bookmark, and  
browse your favorite sites to enjoy the content you want, with simple,  
intuitive navigation.  
The web browser on this device:  
does not support platform-dependent technologies such as ActiveX®.  
only supports preinstalled plug-ins.  
may not support media formats other than the following: JPEG /  
PNG / GIF.  
uses a single built-in font. Some text may not be displayed as  
intended.  
does not support downloading of files or fonts.  
is a TV browser. It may work differently than PC browsers.  
does not support parental control or locks in the content, and it is  
the responsibility of the user to monitor browser usage by minors.  
Some pages may not be displayed correctly or may display differently on  
different devices.  
NOTE  
Using the web browser  
1
Connect to the network.  
2
Press the button on the remote control to access the web browser  
page.  
3
4
Use the  
Bar and press the OK button.  
/
/
/
(arrow) buttons to select to the URL Address  
p q t u  
Enter the desired URL address by using the software keyboard, see  
Press the GREEN button when finished.  
5
You can now browse websites on your TV using the  
(arrow) buttons on the remote control.  
/
/
/
p q t u  
When you press the GREEN button while browsing web content, you  
NOTE  
can use the  
/
/
/
(arrow) buttons on the remote control in  
p q t u  
mouse control mode.  
You can use the Wireless QWERTY keyboard in addition to the  
software keyboard. (L7300U series only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
Using the Cloud TV Service features  
130  
Browsing favorite websites  
1
Connect to the network.  
2
Press the button on the remote control to access the web browser  
page.  
3
Use the  
/
/
/
(arrow) buttons to select the Favorites STAR  
p q t u  
icon on the browser menu bar and press the OK button.  
By adding frequently visited websites to Favorites, you can browse them  
easily.  
NOTE  
You can view the addresses of the websites you visited previously.  
4
Select the item or folders to move to the desired URL address and  
press the OK button.  
You can press the GREEN button on the remote for thumbnail view of all  
your favorites.  
NOTE  
5
You can now browse websites on your TV using the  
(arrow) buttons on the remote control.  
/
/
/
p q t u  
When you press the GREEN button while browsing web content, you  
can use the (arrow) buttons on the remote control in mouse  
NOTE  
/
/
/
p q t u  
control mode.  
Adding favorite websites  
1
Connect to the network.  
2
Press the button on the remote control to access the web browser  
page.  
3
4
desired website.  
Press the Navigation buttons to scroll to Favorites STAR on the  
Browser Menu Bar and press the OK button.  
By adding frequently visited websites to Favorites, you can browse them  
easily.  
NOTE  
You can view the addresses of the websites you visited previously.  
5
Press the OK button to save the desired website to your favorites.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
131  
The desired website is highlighted and displayed on the top row with the +  
(Add) icon.  
NOTE  
The + (Add) icon will change to a page icon after the website has been  
saved to favorites.  
6
Press the BACK button on the remote to return to browsing your  
website.  
PIP (Picture-in-picture) function  
When viewing the web browser page, currently airing programs or images  
from external inputs can be displayed in a PIP window (sub-screen).  
1
Press the RED button while viewing the web browser page.  
The currently airing program or images from external inputs are  
displayed in a PIP window.  
The position of the PIP window, and whether it is displayed or  
not can be set in the web browser Settings.  
To stop displaying the PIP window:  
Press the RED button when the PIP window is displayed.  
The CH  
/
buttons cannot be used when the PIP window is displayed.  
NOTE  
p q  
Using Skype™  
Skype™-ready Toshiba TVs bring your family and friends closer to your  
home. Skype™ on your Toshiba TV allows you to share special moments  
no matter the distance.  
Before using Skype™ - Preparation  
Connect the FREETALK HD Camera: TALK-7291 to the TV’s  
USB terminal. Do not use a USB hub. For a Skype™-ready Toshiba  
TV compatible camera, please visit the following website: http://  
shop.skype.com  
Arrange the HD camera on top of the TV, ensuring it's in the center.  
Connect to the network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service features  
132  
The HD camera is sold separately.  
NOTE  
Do not connect a camera other than the recommended HD camera.  
Using a wireless network may result in degraded call quality.  
Some of the features available on other versions of Skype™ are not  
available on the television.  
When using Skype™, some functions of the TV will not be available.  
The sound settings are switched to Skype™ mode.  
If you cannot hear the person you're speaking with, check your TV  
volume.  
When Optical Digital output or Analog output is used and you are  
signed in, the ring tone may not sound.  
The volume level on Skype™ may differ from other features on your  
TV.  
When the Reset TV feature is used from the TV Menu, Skype™  
information is reset to factory default settings.  
Screenshots used in this manual may differ from the TV Menu,  
Skype™ will be reset to its factory default settings.  
No emergency calls with Skype™  
Skype™ cannot be used for emergency calls.  
Getting started  
1
Press the  
button on the remote control.  
2
Select Skype and press the OK button.  
“Welcome to Skype” screen appears.  
Welcome to Skype  
Press [OK]  
Skype Name  
Password Press [OK]  
Sign in when Skype starts  
Start Skype when TV starts  
Sign in  
Create Account  
(Sample Image) Welcome Skype screen  
Select Sign in or Create Account.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
133  
To create a new account:  
If you do not already have a Skype™ account, you can create a new one  
from your TV.  
1
Select Create Account in the Welcome to Skype screen and press  
the OK button.  
Create new Skype account  
Full Name  
Skype Name  
Password  
1~70 characters  
6 and 32 characters  
6~20 characters  
Repeat Password 6~20 characters  
Email Press [OK]  
Yes, send me Skype news and special offers.  
I have read and accept:  
the Skype Terms of Use  
the Skype Privacy Statement  
I agree - create account  
Cancel  
Create new Skype account  
Full Name  
1~70 characters  
Skype Name 6 and 32 characters  
!
W
S
£
E
D
C
$
R
F
V
%
T
^
Y
H
N
&
U
J
*
I
(
)
P
:
_
{
+
}
Q
A
Z
O
L
>
Alt  
|
G
B
K
<
@
~
X
M
?
Enter  
(Sample Image) Welcome Skype screen  
2
Enter your Full Name, Skype Name, Password, Repeat password,  
and Email.  
If you want to receive Skype™ news and special offers,  
check the selection box. Skype™ will inform users about new  
products, features and special offers by email.  
3
4
Select “I agree - create an account” and press the OK button.  
You'll now be signed into your new account.  
Please ensure that you have entered your email address correctly. It is  
required in case you lose or forget your password.  
NOTE  
If you forget your password, visit skype.com to retrieve it.  
If a message appears informing you that the entered Skype™ name is  
already registered, please choose a different name.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
134  
To Sign into Skype™:  
If you have a Skype™ account, sign into Skype™ in the Welcome to  
Skype screen.  
1
2
Enter your Skype Name and Password.  
Select Sign in and press the OK button .  
If “Sign in when Skype starts” is checked, your account will  
sign in automatically when you launch Skype™ from the menu.  
If “Start Skype when TV starts” is checked, your account will  
sign in automatically when you turn on the TV.  
Basic Operation  
Press the  
/
(arrow) buttons to select a tab (Contacts/People, Recent,  
p q  
Dialer, or Settings). Press the  
/
/
(arrow) buttons to select a contact  
p q  
c
from the list.  
Your contact list will contain the following information:  
Contact name / Current online status / Profile picture / Mood message  
Your proꢁle picture, status, Skype Name, mood message and available  
Skype Credit.  
Name  
- TextTextTextTextTextTextTextTextTextTextTextText  
Skype Credit  
Contact List  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
+8888888888888  
Status  
Add Contact  
Exit  
Tab  
Status: Change your availability status  
Add Contact: Add a Skype account or phone number  
EXIT: Return to previous screen. When at contact list, the EXIT button  
will close Skype application without sign out.  
The current status for each of your contacts are explained below:  
: Online  
: Oꢀine  
: Away  
: Phone number  
: Do not disturb  
: Oꢀine with voice messaging or  
call forwarding enabled  
(Sample Image) SkypeTM contact list menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
135  
Contacts/People  
Press the  
/
(arrow) buttons to select Contacts tab. Press the  
/
/
p q  
(arrow) buttons to select a contact.  
p q  
c
After pressing the OK button on each contact, the following functions  
will be displayed:  
No blocked contactor  
Name  
- TextTextTextTextTextTextTextTextTextTextTextText  
Skype Credit  
Contact List  
Name Name  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
Video call  
Voice call  
TextTextTextTextTextTextTextTextText  
Name Name  
View Profile  
Send Voice Message  
Block  
Remove  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
+8888888888888  
Status  
Add Contact  
Exit  
Initiate Video Call  
View Proꢀle  
- View contact proꢀle (including Skype name, full  
name, birth date, gender, location, mobile  
number and email).  
Send Voice Message - Send Voice Message to contact  
Block  
Remove  
- Block / unblock contact  
- Remove contact from list  
(Sample Image) SkypeTM contact list - select menu  
Video or Voice call  
Press the  
/
/
/
(arrow) buttons to select Video call or Voice call,  
p q t u  
your screen will now display your call as shown below.  
Video call  
Other side  
Own side  
Voice call  
(Sample Image) SkypeTM video/voice call screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
136  
Below is all icon pictures in conversation window.  
Start video  
Stop video  
Resume the call  
Unmute the webcam mic  
Mute the webcam mic  
Normal size video  
Full screen video  
Open dial pad  
End call ( Hang up the call )  
Group calls  
Using your Toshiba TV, you can join Skype™ group voice and video  
calls. However, you can only send and receive audio while on these calls.  
You must be invited on to a group call, you cannot initiate it from the TV.  
NOTE  
Incoming call  
Incoming calls on Skype™ will be displayed on the bottom right hand  
corner of your TV screen. You'll also hear a ring tone which can be  
adjusted using the Volume buttons on your remote control.  
Incoming Call...  
Name  
Video  
Voice  
Decline  
(Sample Image) SkypeTM incoming call menu  
You are given three options when an incoming call arrives:  
Video : Answer by video call.  
Voice : Answer by voice call.  
Decline : Decline the incoming call.  
If other applications are active or recording, you'll only get an "Incoming  
call notification" until the application or recording has stopped.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
137  
Status  
When pressing the GREEN button, the change status window is  
displayed as below. You can change your status by pressing the  
/
p q  
(arrow) buttons and then pressing the OK button. Exit by pressing the  
BACK button.  
Name  
TextText
st  
Online  
Name Name  
TextTextTextTextTextTextTextTextText  
Do not disturb  
Away  
Name Name  
TextTextTextTextTextTextTextTextText  
Invisible  
Name Name  
TextTextTextTextTextTextTextTextText  
Sign Out  
Name Name  
TextTextTextT
Status  
Add Contact  
Exit  
(Sample Image) SkypeTM status menu  
Add Contact  
You can add contacts to your contact list.  
When you press the Yellow button on the remote control, the Add  
Contact Type menu window will appear on the screen.  
TextTextTextTText
S
ntact st  
Add Contact Type  
Skype Contact  
Phone Number  
Exit  
8888888888888  
(Sample Image) SkypeTM Add Contact Type menu  
Two sub-functions are supported.  
Press the  
/
(arrow) buttons to select Skype Contact or Phone  
p q  
Number and press the OK button.  
Skype Contact  
Enter the Skype Name of the person you're looking for. The search  
result will show up after get response from Skype™ server.  
Phone Number  
You can also enter a phone number in the search window.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
138  
Using the Cloud TV Service features  
Contact Search Results  
Add a Skype contact  
Search Result: (jackyding)  
Full Name  
Skype Name  
Country  
Aaaaaa_0101  
Bbbbbb007  
Cccccc0709  
Ddddddd  
Aaaaaa_0101  
Bbbbbb007  
Cccccc A01  
Ddddddd Ddd  
USA  
UK  
HK  
Taiwan  
Eeeeee_Eeee  
Ffffffffff_Fu  
EE_Eeeee  
Japan  
Taiwan  
Taiwan  
Ffffffffff_Ff  
Gggggg_Ggg  
Gggggg_Ggg  
Back  
(Sample Image) SkypeTM contact search results screen  
You can send a contact request to a person displayed in the search results.  
Press the  
button.  
/
(arrow) buttons to select a person and press the OK  
p q  
Notification of authorization request  
Name  
- TextTextTextTextTextTextTextTextTextTextTextText  
Skype Credit  
Contact List  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
Name Name  
TextTextTextTextTextTextTextTextText  
Notification  
+8888888888888  
You have received  
a
contact request.  
Status  
OK  
(Sample Image) SkypeTM notification of authorization request screen  
When you receive a contact request, a pop-up menu will appear where  
you can choose to Accept, Block or Decline the request.  
Press the  
/
(arrow) buttons to select and press the OK button.  
p q  
Request Form  
ms_audi  
john5678236  
Exit  
(Sample Image) SkypeTM request form screen  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
139  
Using the Cloud TV Service features  
Press the  
/
(arrow) button to select and press the OK button.  
t u  
ms_audi  
Hello! Please add me to your Contacts.  
Accept  
Block  
Decline  
(Sample Image) SkypeTM request form screen  
Recent  
You can see a list of past events in “Recent”.  
Press the  
/
(arrow) buttons to select the Recent tab. Press the  
/
/
p
p q  
c
(arrow) buttons to select an item and press the OK button.  
q
Name  
- TextTextTextTextTextTextTextTextTextTextTextText  
Skype Credit  
Resent  
Name Name  
Name Name  
Tue Jul  
3
04:07:47 2012  
Duration 00:10:00  
Duration 00:00:00  
Duration 00:01:06  
Name Name  
Tue Jul 03:44:58 2012  
Video call  
Voice call  
3
View Profile  
Name Name  
Mon Jul 10:01:11 2012  
Name Name  
Mon Jul 06:36:49 2012 Duration 00:03:04  
Send Voice Message  
2
Listen to Voice Message  
Add to Contacts  
2
Delete This Item  
Name Name  
Tue Jun 28 03:30:17 2012  
Duration 00:00:08  
Status  
Add Contact  
Exit  
(Sample Image) SkypeTM recent screen  
Press the (arrow) buttons to select Video call or Voice call.  
/
t u  
Each call has an icon with it. The meaning of each icon is as follows:  
Icons  
Description  
Incoming call  
Outgoing call  
Missed call  
Unread voice message  
Voice Message  
Dialer  
You can call mobiles and landlines from this screen.  
Press the (arrow) buttons to select the Dialer tab. Press the  
/
/
/
p q  
p q  
c
(arrow) buttons to navigate this screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
140  
Using the Cloud TV Service features  
Name  
- TextTextTextTextTextTextTextTextTextTextTextText  
Skype Credit  
Dialer  
Please input the country code  
-Select One-  
Taiwan  
+886  
+992  
+255  
+66  
Tajikistan  
Tanzania  
Thailand  
Timor-Leste  
Togo  
+670  
+228  
Status  
Add Contact  
Exit  
(Sample Image) SkypeTM dialer screen  
Select the country or region first, and then enter the phone number with  
area code. You'll need a little Skype™ Credit in your account to call  
mobiles or landlines using Skype™.  
Emergency calls over Skype™ are not supported.  
Settings  
Press the  
/
to select the Settings tab and press the OK button.  
p q  
The Settings page will appear.  
Settings  
Name Name  
User Profile  
(1/2)  
Change Password  
General Settings  
Audio Settings  
Privacy Settings  
Blocked Contacts  
Call Settings  
Gender -Select One-  
Birth Date  
(D)  
(M)  
(Y)  
Country/Region -Select One-  
State/Province Press [OK]  
City Press [OK]  
Home Phone  
Press [OK]  
Press [OK]  
Press [OK]  
Office Phone  
Mobile Phone  
About Skype  
Exit  
(Sample Image) SkypeTM options screen.  
You can change the following settings:  
User Profile  
Add or change your personal information e.g. birth date, country/  
region or phone number.  
Change Password  
You can change your password by entering your existing password  
and new password twice.  
General Settings  
Select whether Skype™ should automatically start when turning on  
the TV.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
141  
Audio Settings  
Adjust the speaker / ringtone volume manually.  
The volume of your speakers will be different on Skype™ compared  
to your normal TV volume level. The speaker volume range is 0 -  
100% by 1 steps, and ringtone volume is 0 - 100% by 25 steps.  
Privacy Settings  
Set who you allow calls from, whether it's Anyone or People in my  
Contact list only.  
Blocked Contacts  
If you do not want someone to reach you, simply block them by  
entering their Skype™ Name or phone number from this menu.  
Successfully blocked contacts are displayed in this window.  
Call Settings  
If you're not signed into Skype™, you can forward incoming calls  
to another phone number, Skype™ name or choose to accept voice  
messages. However you'll need to have Skype™ Credit to turn this  
feature on.  
About Skype  
Displays information about Skype™.  
MediaShare (Videos, Music, and Photos)  
MediaShare provides a simple graphic interface to quickly access and  
share videos, music, and image files across your home network and the  
other connected devices.  
To access the MediaShare Service, press the MEDIA SHARE button on  
the remote or select the MediaShare tab from the Cloud TV Portal pages.  
To use MediaShare please configure the network settings on your TV.  
44.  
NOTE  
Do not insert/remove a USB device while in use.  
The SETUP button is not available while using the MediaShare  
feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
142  
MediaShare specifications  
Devices:  
USB device: USB Mass Storage Class devices (MSC)  
Connected Media Server:  
Your computer (for example)  
Connectivity is not guaranteed for all devices.  
NOTE  
Some functionality may be lost with a USB HUB connection.  
Supported file system:  
FAT16 and FAT32  
You must obtain any required permission from copyright owners to  
download or use copyrighted content. Toshiba cannot and does not grant  
such permission.  
NOTE  
Basic operation  
Using MediaShare with a USB device  
When Auto Start is enabled, you will be asked if you want to start the  
MediaShare when a USB device is inserted. If Auto Start is disabled  
(or if you want to connect to a media server on the network), you must  
manually start the MediaShare from the Cloud TV Portal pages or press  
the MEDIA SHARE button on the remote control.  
To change the Auto Start setting  
1
Press the SETUP button.  
2
Select Options > MediaShare Setup > USB Auto Start and press  
the OK button.  
3
Press the  
/
(arrow) buttons to select On or Off.  
p q  
Auto Start  
1
2
3
4
Insert a USB device into the USB terminal.  
A prompt appears.  
Press the  
button.  
/
(arrow) buttons to select Yes, and then press the OK  
t u  
Press the  
/
(arrow) buttons to select Videos, Music, or Photos,  
p q  
and then press the OK button.  
To change the device, press the  
/
/
/
(arrow) buttons to select  
p q t u  
the devices on the screen, and then press the OK button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
143  
Using the Cloud TV Service features  
5
6
Press the  
/
(arrow) buttons to select the device and then press  
p q  
the OK button.  
Press the  
button.  
/
(arrow) buttons to select OK and then press the OK  
p q  
If Auto Start is set to Off, you can start the MediaShare manually.  
NOTE  
Manual Start  
1
2
3
Insert a USB device into the USB terminal.  
Press MEDIA SHARE.  
To change the device, press the  
/
/
/
(arrow) buttons to select  
p q t u  
the devices on the screen, and then press the OK button.  
4
5
Press the  
/
(arrow) buttons to select the device and then press  
p q  
the OK button.  
Press the  
button.  
/
(arrow) buttons to select OK and then press the OK  
p q  
To select a file in the list of contents  
1
Press the  
/
/
/
(arrow) buttons to select a file or folder.  
p q t u  
File:  
Press the OK button to play or view.  
Folder:  
Press the OK button to move to the next layer, or press the BACK  
button to return to the previous layer.  
Sort  
1
Select the Sort and press the OK button.  
2
Press the  
/
(arrow) buttons to select the sorting (File Name,  
p q  
New or Old) rule and press the OK button.  
3
Select OK and press the OK button.  
Sorting may take a little time.  
NOTE  
To close the MediaShare  
1
Press the EXIT button.  
2
Press the  
button.  
/
(arrow) buttons to select Yes and then press the OK  
t u  
The TV will return to the last-viewed channel or video input.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service features  
144  
Using MediaShare with a Media Server  
You need to configure a home network before using this feature, see  
1
2
Press the MEDIA SHARE button.  
To change the device press the  
/
/
/
(arrow) buttons to select  
p q t u  
the Device Name button on the screen, and then press the OK  
button.  
3
4
Press the  
/
(arrow) buttons to select the device and then press  
p q  
the OK button.  
Press the  
button.  
/
(arrow) buttons to select OK and then press the OK  
p q  
To select a file in the list of contents  
1
Press the  
/
/
/
(arrow) buttons to select a file or folder.  
p q t u  
File:  
Press the OK button to play or view.  
Folder:  
Press the OK button to move to the next layer, or press the BACK  
to return to the previous layer.  
Sort  
1
Select the Sort and press the OK button.  
2
Press the  
/
(arrow) buttons to select the sorting (Title, New or  
p q  
Old) rule and press the OK button.  
3
Select OK and press the OK button.  
Sorting may take a little time.  
NOTE  
Depending on the Media server, this function may not be usable.  
To close the MediaShare  
1
Press the EXIT button.  
2
Press the  
button.  
/
(arrow) buttons to select Yes and then press the OK  
t u  
The TV will return to the last-viewed channel or video input.  
To display the device information  
1
Press the QUICK button to open the Quick menu in list mode or  
Multi View mode.  
2
Press the  
/
(arrow) buttons to select Device Information.  
p q  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service features  
145  
Viewing movie files  
Basic Playback  
1
2
Press the OK button or PLAY button to begin playback.  
Depending on the file size, it may take some time to start playback.  
NOTE  
3
Press the STOP button to stop playback.  
The screen returns to the list.  
If playback finishes before the STOP button is pressed, the screen  
returns to the list.  
When the repeat mode is set to All, the next file will start playing  
automatically.  
NOTE  
Resume Playback  
You can resume playback from where it was last stopped.  
Press the STOP button while playing the movie to memorize the  
stopped position.  
If the same file is selected and played, playback will resume from  
the last stopped position.  
If you play different content or exit MediaShare, the memorized  
stopped position will be deleted.  
NOTE  
This function may not be available depending on the content.  
To pause playback  
Press the PAUSE button during playback.  
To resume normal playback, press the PLAY button.  
The PAUSE button or operations during Pause may not be functional  
depending on content or media server.  
NOTE  
To locate a specific file  
Press the Skip Reverse or Skip Forward button repeatedly to  
access the desired file.  
(
Z
): Playback starts from the beginning of the current file or  
previous file.  
(
z
): To locate subsequent files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
146  
To play in fast reverse or fast forward directions  
Press the  
or button during playback. Each time you press  
CC cc  
the  
or button, the playback speed will change.  
CC cc b  
These features may not be operable depending on the content or media  
server.  
NOTE  
To set the repeat mode  
1
Press QUICK button.  
2
Press the (arrow) buttons to select Repeat.  
/
p q  
The current repeat setting appears.  
Press the (arrow) buttons to select Off, All, or 1.  
3
4
/
t u  
Press the BACK button.  
The setting is effective until the TV is turned off.  
Mode:  
Description:  
Off  
All  
1
The content is played back only once  
All contents in the same folder are repeatedly played back  
The same content is repeatedly played back  
To select a movie from Play List (except for Media Renderer  
function)  
While playing a movie, you can select a different movie from the Play  
List.  
1
2
Press the QUICK button to open the Quick Menu.  
Press the  
button.  
/
(arrow) buttons to select Play List and press the OK  
B b  
The Movie List will appear.  
3
Press the (arrow) buttons to select a file name.  
/
B b  
To display the file status information  
1
Press the INFO button during playback.  
The information will be displayed at the bottom of the screen.  
2
Press the INFO button again to hide the information.  
The information may not correctly display depending on the content or  
media server.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
147  
Using the Cloud TV Service features  
To register your TV to a DivX® account:  
This TV allows you to play back files purchased or rented from DivX®  
Video-On Demand (VOD) services. When you purchase or rent DivX®  
VOD files on the internet, you will be asked to enter a registration code.  
1
2
Press the SETUP button.  
Select Options > MediaShare Setup > DivX® VOD and press the  
OK button.  
3
4
Press the  
/
(arrow) buttons to select DivX® VOD Registration,  
p q  
and then press the OK button.  
The DivX® VOD window will appear and you will see the  
registration code. For details on registration, please visit the DivX®  
website at  
http://vod.divx.com  
5
Copy the activation file to a memory device and play it on the TV.  
To unregister your device:  
1
Press the SETUP button.  
Select Options > MediaShare Setup > DivX® VOD and press the  
2
OK button.  
3
4
5
Press the  
/
(arrow) buttons to select DivX® VOD  
p q  
Deregistration, and then press the OK button.  
A confirmation message will appear. Select Yes and press the OK  
button.  
The DivX® VOD window will appear and you will see the  
deregistration code. For details on registration, please visit the  
DivX® website at http://vod.divx.com  
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,  
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®  
device that plays DivX video. Visit divx.com for more information and  
software tools to convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device  
must be registered in order to play purchased DivX Video-on-Demand  
(VOD) movies. To obtain your registration code, locate the DivX  
VOD section in your device setup menu. Go to vod.divx.com for more  
information on how to complete your registration.  
DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video  
up to 1080p HD including premium content.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
148  
Using the Cloud TV Service features  
To playback DivX Plus® HD content:  
To play in fast reverse or fast forward directions, press the  
or  
CC  
button during playback. Each time you press the  
or  
cc  
CC cc  
button, the playback speed will change.  
If the content contains no chapter, this TV generates original chapter  
point in 10% increments for 10 chapters in total, that are accessible  
by using the Number buttons on the remote control.  
During playback, press the  
button to skip to the beginning of the next  
z
chapter. When the  
button is pressed twice in succession, it will repeat  
z
two times of above. If the  
button is pressed at the last chapter, the  
z
confirmation message will appear. If Yes is selected, playback will skip to  
the beginning of the next content.  
Press the  
button to skip to the beginning of the current chapter.  
Z
When the  
button is pressed twice in succession, it will skip to the  
Z
beginning of the previous chapter. If the  
button is pressed twice  
Z
continuously at the first chapter, playback of the current content will stop  
and the confirmation message will appear. If Yes is selected, playback  
will skip to the beginning of the previous content.  
Press the (arrow) button to skip to the beginning of the previous  
p
content.  
Press the (arrow) button to skip to the beginning of the next  
q
content.  
The Number button is used for direct jump.  
For example: If you press the 3 button and then press the OK button,  
playback will jump to the beginning of 3rd chapter.  
Depending on the content data will not be operated.  
NOTE  
The playback speed (  
stream.  
/
) may not change depending on the  
CC cc  
Using Multi Title and Alternative Timelines Multi Title  
DivX Plus® HD files may contain up to 100 titles.  
You can change the title (It contains same video file) by pressing the  
RED button.  
When the RED button is pressed, it will display the title change window  
at the bottom on the screen (same as Subtitle or Audio change window).  
The title is changed cyclically each time the RED button is pressed.  
Playback starts from the beginning of the title, which is selected by the  
p
or (arrow) buttons.  
q
Pressing the  
/
(arrow) buttons also changes the multi title.  
t u  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
Using the Cloud TV Service features  
149  
Depending on the content data will not be operated.  
NOTE  
File specifications:  
USB use:  
File format: MPEG2 PS, MPEG2 TS, MPEG-2 VOB, AVI, MOV,  
MP4, ASF, DivX, Xvid, MKV, Flash Video (FLV1), 3GPP, Motion  
JPEG  
Video: MPEG2, H.264, MPEG-4 part2, DivX, Xvid, VC-1  
(WMV9), RealVideo 8, 9, 10, Sorenson H.263 (FLV1), JPEG  
Audio: MPEG1-Layer2/MPEG1-Layer3/Dolby® Digital (AC3)/  
LPCM, AAC, WMA7/8/9, ADPCM  
Maximum number of files: 1000 per folder  
Maximum video resolution: 640x480 (Motion JPEG), 1920 x 1080  
(other)  
Content on a connected Media Server:  
File format: MPEG2 PS, MPEG2 TS, MP4 (Low resolution)  
Video: MPEG2 (PS), H.264  
Audio: LPCM/MPEG1-Layer2/ MPEG2-Layer2/ Dolby Digital  
(AC3)/AAC  
Maximum number of files: 1000 per folder  
Maximum video resolution: 1920 x 1080  
It may not be possible to use certain playback features or display some  
files. In some cases certain files and servers may not support playback  
features, such as pause.  
NOTE  
Playing music files  
Basic Playback  
1
Press the OK button or the PLAY button to begin playback.  
Depending on the file size, it may take some time to start playback.  
NOTE  
2
Press the STOP button to stop playback.  
The screen returns to the list.  
If playback finishes before the STOP button is pressed, the screen  
returns to the list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
150  
To pause playback  
1
Press the PAUSE button during playback.  
2
To resume normal playback, press the PLAY button.  
The PAUSE button or operations during Pause may not be functional  
depending on content or media server. Certain processes may take some  
time to complete.  
NOTE  
To locate a specific file  
Press the Skip Reverse or the Skip Forward button repeatedly to  
access the desired file.  
(
): Playback starts from the beginning of the current file or  
Z
previous file.  
(
z
): To locate subsequent files.  
To play in fast reverse or fast forward directions  
Press the  
or button during playback. Each time you press  
CC cc  
the  
or button, the playback speed will change.  
CC cc  
These features may not be operable depending on the content or media  
server.  
NOTE  
To set the repeat mode  
1
Press the QUICK button.  
2
Press the  
/
(arrow) buttons to select Repeat.  
p q  
The current repeat setting appears.  
Press the (arrow) buttons to select Off, All, or 1.  
3
4
/
t u  
Press the BACK button.  
The setting is effective until the TV is turned off.  
Mode:  
Description:  
Off  
All  
1
The content is played back only once  
All contents in the same folder are repeatedly played back  
The same content is repeatedly played back  
To select a music from Play List (except for Media Renderer  
function)  
While playing a music file, you can select a different music file from the  
Play List.  
1
Press the QUICK button to open the Quick Menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced features  
151  
Using the Cloud TV Service features  
2
3
Press the  
button.  
The Music List will appear.  
/
(arrow) buttons to select Play List and press the OK  
B b  
Press the (arrow) buttons to select a file name.  
/
B b  
To display the file status information:  
1
Press the INFO button during playback.  
The information appears at the bottom of the screen.  
2
Press the INFO button again to hide the information.  
The information may not correctly display depending on the content or  
media server.  
NOTE  
File specifications:  
USB use:  
File format: MP3, MP4 (AAC), WMA7/8/9, WAV (LPCM)  
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz  
Bit rate: From 32 to 320 kbps  
Maximum number of files: 1000 per folder  
Content on a connected Media Server:  
File format: MP3, MP4 (AAC), WMA9 std, LPCM  
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz  
Bit rate: From 32 to 320 kbps  
Maximum number of files: 1000 per folder  
It may not be possible to use certain playback features or display some  
files. In some cases certain files and servers may not support playback  
features, such as fast-forward.  
NOTE  
Viewing photo files  
Multi View mode  
This view mode allows you to search for photos in a grid format.  
These pictures are displayed using thumbnail data in each image file.  
1
Press the  
window.  
/
/
/
(arrow) buttons to move the highlight by one  
p q t u  
If all of the photos will not fit in one screen, when pressing the  
p
(arrow) button at the left thumbnail, the screen will scroll up one by  
one. Similarly, when pressing the (arrow) button at the bottom  
q
thumbnail, the screen will scroll down one by one.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Advanced features  
Using the Cloud TV Service features  
152  
2
3
When you select a folder, press the OK button to move to the next  
layer.  
Press the BACK button to move back to the previous layer.  
Press the OK button to view the selected photo in Single View  
mode.  
Displaying thumbnail data may take time.  
NOTE  
In order to use the  
/
(arrow) button to scroll the screen, there  
p q  
must be enough content to take up two screens.  
Single View mode  
In this view mode, only files located in the selected directory are  
displayed. When moving from Multi View mode to Single View mode,  
the currently selected photo appears.  
1
On Multi view mode, press the  
/
/
/
(arrow) buttons to select  
p q t u  
a file, and then press the OK button.  
Press the (arrow) buttons to view the next or previous file.  
2
/
t u  
Single view mode is changed to Multi View mode when the BACK button is  
pressed.  
NOTE  
Slide Show mode  
This view allows you to watch a slide show of the photos. In this mode,  
only files located in the selected directory appear.  
1
2
To switch to Slide Show mode, press the OK button while in Single  
View mode.  
To return to Single View mode, press the OK button again.  
Press the  
/
(arrow) buttons to view the next or previous file.  
t u  
Mode settings  
1
Press the QUICK button to open the Quick menu while in Single  
View mode or Slide Show mode.  
2
Press the  
/
(arrow) buttons to select the item (Interval Time or  
p q  
Repeat).  
3
4
Press the  
/
(arrow) buttons to adjust the setting.  
t u  
Press the BACK button to return to Single View mode or Slide  
Show mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Using the Cloud TV Service features  
153  
Mode:  
Description:  
Interval Time  
Repeat  
Sets a time interval at which to view photos  
Displays photos in the same directory repeatedly (On/Off)  
Rotate the image  
While viewing the image in Single View mode or Slide Show mode, press  
the (arrow) buttons to rotate the image 90 degrees.  
/
p q  
To zoom in/out photos (except for Media Renderer function)  
During the Single View mode or Slideshow mode, the zoom function can  
be used. The Slideshow mode changes to the Single View mode.  
RED button : Zoom in  
x1 → x2 → x4 → x8 zoom  
GREEN button : Zoom out  
x8 → x4 → x2 → x1 zoom  
/
/
/
(arrow) buttons: Vertical or Horizontal scrolling  
p q t u  
To set Background Music  
1
Press the QUICK button to open the Quick Menu while in the  
Slide Show mode or Single View mode.  
2
3
Select Background Music and press the OK button.  
Press the  
/
(arrow) buttons to select On.  
B b  
The music file in the same folder as the displayed photo will start  
playing.  
Al the music files in the same folder as the photo will be played  
repeatedly.  
NOTE  
To stop music file playback, select Off in Background Music.  
To select a photo from Play List (except for Media Renderer  
function)  
While in the Single View mode or Slide Show mode, you can select a  
different photo from the Play List.  
1
2
Press the QUICK button to open the Quick Menu from Single View  
mode or Slide Show mode.  
Press the  
button.  
/
(arrow) buttons to select Play List and press the OK  
B b  
The Photo List will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
154  
Using the Cloud TV Service features  
3
Press the  
/
(arrow) buttons to select a file name.  
B b  
Display file status information  
1
Press the INFO button.  
The information appears at the bottom of the screen.  
2
Press the INFO button again to hide the information.  
The information may not correctly display depending on the content or  
media server. Certain processes may take some time to complete.  
NOTE  
File specifications:  
USB use:  
Data compatibility: JPEG Exif ver 2.2  
File format: JPEG, BMP  
Maximum viewable resolution:  
15360 × 8640 (JPEG:Base-line), 1024 × 768 (JPEG:Progressive),  
9600 × 6400 (BMP)  
Maximum number of files: 1000 per folder  
Content on a connected Media Server:  
Data compatibility: JPEG Exif ver 2.2  
File format: JPEG  
Maximum photo resolution: 4096 × 4096  
Maximum number of files: 1000 per folder  
It may not be possible to use certain function or display some files.  
NOTE  
Search  
To search for content,  
1
2
Select the search.  
Enter in keyword and the search will search for:  
Media server  
Videos; Title name  
Music; Title name/Artist name/ Album name  
Photos; Title name  
USB  
Videos/Music/Photos; File name  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced features  
Network Device Setup  
155  
Folders are not subject to the search function.  
NOTE  
3
4
5
The retrieval result is displayed.  
Select one of the search results.  
The selected content will play.  
The search retrieval stops when content is being played.  
NOTE  
The results screen shows different categories of media; Videos,  
Music and Photos. Select the below a category and press the  
b
OK button to display results only for that category of media on the  
screen.  
b
To return to the previous display, select and press the OK button.  
p
Network Device Setup  
In order to set the access the External Control Setup, Media Renderer  
Setup, or Device Name Setup, you must use the Network Device Setup  
menu.  
External Control Setup  
1
Press the SETUP button.  
2
3
Select Network > Network Device Setup > External Control  
Setup and press the OK button.  
Use the  
/
(arrow) buttons to select and set Enable Control to  
p q  
On or Off.  
To access the Home Control Profile:  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > External Control  
Setup and press the OK button.  
3
4
Use the  
/
(arrow) buttons to select and set Enable Control to  
p q  
On or Off.  
Use the  
/
(arrow) buttons to select Home Control Profile and  
p q  
press the OK button.  
The Home Control Profile window will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced features  
156  
Network Device Setup  
5
Use the  
/
/
/
(arrow) buttons to navigate to the User Name  
p q t u  
or Password field. Input the user name and password using the  
Software Keyboard or Wireless QWERTY keyboard (for L7300U  
series only).  
121.  
Only the 0-9 and capital/lowercase A-Z characters may be used for the user  
name and password.  
NOTE  
Setting up the Media Renderer feature  
The TV can be configured as a Media Renderer. When operating as a  
Media Renderer, the TV displays content provided mobile devices or PCs.  
The selection of the media is done by the media controller.  
The TV can play photo, movie, or audio files when operating as a Media  
Renderer.  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > Media Renderer and  
press the OK button.  
3
Press the  
/
(arrow) buttons to select On or Off, and then press  
p q  
the OK button.  
Device Name setup  
The device name as a Media Renderer can be changed.  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > Device Name Setup  
and press the OK button.  
3
4
Select the Device Name field. Press the OK button.  
The Software Keyboard screen appears.  
Input the device name by using the Software Keyboard. To save  
your setting, press the GREEN button.  
5
Select Done. Press the OK button.  
The maximum number of characters allowed for the device name is 15.  
Only 0-9, A - Z (upper case only), "-" can be used in the device name.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 9  
Cloud TV Companion  
Apps  
Using Apps on a Tablet or Smart phone  
Toshiba provides apps for tablets and smart phones. The apps will vary by  
country and availability may change in the future with respect to current  
apps.  
Apps will vary by country and availability may change in the future on  
current apps.  
NOTE  
These apps are available for compatible Toshiba equipment using  
compatible tablets and smart phones powered by Android™ or iOS. You  
can download these apps through the Google Play™ or the iTunes Store.  
In order to use these apps, you must configure the settings through the  
Apps Control Profile.  
Third party Internet services are not provided by Toshiba, may change  
or be discontinued at any time, and may be subject to Internet service  
provider restrictions. Toshiba makes no warranties, representations,  
or assurances about the content, availability, or functionality of third-  
party content or services. Use of third-party Internet services may  
require the creation of a separate account through a computer with  
Internet access and/or payment of one-time and/or recurring charges  
and membership. Not all third-party services may be available on or  
compatible with this product. In order to experience the full suggested  
capabilities of this product, fully-compatible devices may be required.  
NOTE  
157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Apps Collaboration  
158  
Apps Control Profile  
Apps can only be used when your TV and your tablet or smart phone  
are connected to the Internet.  
Starting and operation of this service may take several minutes.  
Software updates may be needed in order to use this service.  
In order to experience the full suggested capabilities of this product,  
fully-compatible devices may be required.  
Certain features may not be available in all countries.  
Companion Apps available through the Cloud may be changed  
or removed at any time. Not all operating system Apps may be  
compatible with the Cloud. Services depicted in this eManual and  
provided through the Cloud may not be available in your region and  
may not be available to you. Please check your individual device for  
app compatibility.  
As soon as the application is deployed, this feature can be used.  
Apps Control Profile  
To select the Apps Control Profile  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > External Control  
Setup and press the OK button.  
3
4
Press the  
Profile and press the OK button.  
The Apps Control Profile window will appear.  
/
(arrow) buttons to select and set Apps Control  
p q  
Press the  
/
(arrow) buttons to select Device Registration Setup  
p q  
and press the OK button.  
The Device Registration Setup window will appear.  
5
6
Use the  
/
(arrow) buttons to select the Companion Device ID.  
p q  
Select the Cancel, All, or Delete buttons.  
If the maximum number of registered devices (20) is exceeded, no  
additional devices can be registered. Delete unnecessary devices  
before registering a new device.  
NOTE  
When re-registering a device which has been deleted from the list,  
pairing must be carried out again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Apps Collaboration  
159  
Pairing  
To enable the New Device Detection:  
1
2
Press the SETUP button.  
Select Network > Network Device Setup > External Control  
Setup and press the OK button.  
3
4
Press the  
Profile and press the OK button.  
The Apps Control Profile window will appear.  
/
(arrow) buttons to select and set Apps Control  
p q  
Press the  
/
(arrow) buttons to select New Device Detection and  
p q  
press the OK button.  
Use the (arrow) buttons to select Enable or Disable.  
5
6
/
t u  
Press the OK button to submit.  
Pairing  
To use Apps, it is necessary to connect a compatible tablet or smart phone  
and this TV to your home network, and carry out pairing (using a 4 or 8  
digit password to authenticate the device).  
Refer to the Apps manual for more details about pairing.  
Pairing with external devices cannot be carried out when the TV is  
connected to an unencrypted wireless LAN access point. Activate the  
encryption settings for the wireless LAN access point before carrying  
out Pairing.  
NOTE  
When the Enable Control is not set to ON in External Control Setup,  
Apps functions including Pairing cannot be used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 10  
Troubleshooting  
General troubleshooting  
Before calling a service technician, review this chapter or visit the  
Toshiba Support Web site at "support.toshiba.com" for possible causes/  
solutions for the problem you are experiencing.  
Before you begin to troubleshoot any problem, first unplug the TV from  
the AC wall outlet, wait approximately one minute, and then plug the  
TV back into the AC wall outlet. If the problem still exists attempt to  
troubleshoot the problem.  
Black box on screen.  
The closed caption feature is set to one of the Text modes (T1, T2, T3, or  
T4). Set the closed caption feature to Off, see “Using closed captions” on  
TV stops responding to controls.  
If the TV stops responding to the buttons on the remote control or TV  
control panel and you cannot turn off the TV, unplug the TV from the AC  
wall outlet and plug it back in.  
If you cause a static discharge when touching the TV and the TV fails to  
function, simply unplug the TV from the AC outlet and plug it back in.  
The TV should return to normal operation.  
160  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
Picture problems  
161  
Other problems.  
If your TV’s problem is not addressed in this Troubleshooting chapter or  
the recommended solution has not worked, use the Reset Factory Defaults  
TV will not turn on.  
Check the AC wall outlet by trying another device in the AC wall outlet.  
Ensure the power cord is plugged in properly, and then press the POWER  
button.  
Replace the batteries in the remote control, see “Installing batteries” on  
Try the control panel buttons on the TV.  
Picture problems  
General picture problems.  
Check the antenna/cable connections, see “Connecting Your TV” on page  
27.  
Press the INPUT button on the remote control or on the TV and select a  
71. If you have no picture after selecting a Input source, check the  
device connected to that input for proper operation. For device connection  
Antenna reception may be poor. Use a highly directional outdoor antenna  
(if applicable).  
The station may be having broadcast difficulties. Try another channel.  
Adjust the picture quality, see “Using the advanced picture settings  
If Edge Enhancer does not achieve a sharper picture, change the  
Sharpness value to increase the sharpness level, see “Edge Enhancer” on  
Video Input Selection problems.  
If the Input Selection window does not appear when you press the INPUT  
button on the remote control or the TV control panel, press the INPUT  
button a second time. The TV displays the next video input source and the  
Input Selection screen.  
Cannot view external signals.  
If you cannot view signals from external devices connected to VIDEO 1,  
VIDEO 2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC,  
ensure that the Input Lock is set to Off, see “Locking video inputs” on  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
Sound problems  
162  
Poor display color or no color.  
Check for proper hookup connections between your devices  
The station may be having broadcast difficulties. Try another channel.  
Adjust the Tint and/or Color, see “ColorMaster™” on page 102.  
Poor composite picture.  
If the TV is connected to an external A/V device (e.g. DVD player, video  
game system, set-top box, etc.) try using a ColorStream or HDMIvideo  
connection instead.  
Picture and sound are out of sync.  
As with all products that contain a digital display, this may occur in  
rare instances, when viewing certain content (e.g. television broadcasts,  
video games, DVDs). The cause may include, without limitation, video  
processing within the TV, video processing in an attached gaming system,  
and video processing or different compression rates used by broadcasters  
in their programming.  
Try the following:  
If the TV is connected to an A/V receiver that has a programmable  
audio delay feature, use this feature to help synchronize the sound  
to the picture.  
If the problem occurs only on certain TV channels, inform your  
local broadcast, cable, or satellite provider.  
The settings of PC/HDMI 2 Audio may be not correct. Check the  
Turn off and unplug the TV from the AC wall outlet for a few  
seconds and plug it back in.  
Sound problems  
Check the antenna/cable connections, see “Connecting a digital audio  
The station may be having broadcast difficulties. Try another channel.  
The sound may be muted. Press the VOL (+ -) buttons or MUTE button.  
If you connect a computer using either the PC IN terminal or an HDMI™  
terminal, make sure that the Rear Shared Audio setting is properly set, see  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
Remote control problems  
163  
Remote control problems  
Remove all obstructions between the remote control and the TV.  
Replace the remote control’s batteries, see “Installing batteries” on page  
47.  
Your TV’s remote control may not operate certain features on your  
external device. Refer to the owner’s manual for your other device to  
determine its available features. If your TV remote control does not  
operate a specific feature on another device, use the remote control that  
50.  
If the TV still does not act as expected, perform the Reset Factory  
Channel tuning problems  
Ensure that the remote control is set to the correct device mode, see  
The Auto Tuning feature may have erased the channel from memory. To  
add the channel to the channel memory, see “Manual Tuning” on page  
67.  
The Lock feature may have blocked the channel. To unblock the channel,  
If you cannot tune digital channels, check the antenna configuration, see  
“Initial setup” on page 52. If the problem persists, clear all channels  
from the channel list and reprogram channels into memory, see “Storing  
channels in memory (optional)” on page 66. For additional information,  
persists, use the Reset Factory Defaults procedure, see “Resetting to  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
Closed caption problems  
164  
Closed caption problems  
If the program or video you have selected is not closed captioned, no  
captions appear on the screen.  
If text is not available, a black rectangle may appear. If this happens, turn  
off the closed caption feature, see “Using closed captions” on page 72.  
A closed caption signal may not display correctly under the following  
circumstances:  
The recording is dubbed  
The signal reception is weak  
The signal reception is nonstandard  
For additional information, see “Using closed captions” on page 72.  
Rating blocking (V-Chip) problems  
Forgotten PIN code.  
When the PIN code screen appears, press the INFO button 4 times within  
approximately 5 seconds. The old PIN code is cleared, see “Forgotten  
The V-Chip feature is available for U.S. V-Chip systems only, see “Using  
HDMICEC Control operation  
HDMICEC Control feature is available for Toshiba HDMICEC  
compatible devices.  
HDMIcables.  
Ensure that HDMIcables with the (  
) Logo are used.  
®
The HDMICEC operation is not working correctly.  
When the connected HDMICEC device does not work correctly after  
you have changed the device’s settings, turn off the TV and unplug the  
power cord. After approximately one minute, plug the power cord in and  
turn on the TV. You may also try using a different HDMIcable.  
If several devices are connected, the HDMICEC Control feature may  
not operate properly.  
Read the instruction manual of the connected HDMICEC device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting  
HDMIproblems  
165  
HDMIproblems  
HDMIcables.  
Ensure that HDMIcables with the (  
) Logo are used, see  
®
“Connecting an HDMIor DVI device to the HDMIinput” on page  
37.  
Network problems  
Cannot connect to the Internet.  
Check the modem and its incoming cable/telephone connections, see  
Confirm your modem’s operation.  
Ensure that your IP address is set up correctly, see “IP Address Setup” on  
No network connection.  
If using a wired network connection, check to ensure that the LAN cables  
Ensure that the modem and router power cords are plugged in and the  
devices are operating properly.  
Ensure that your IP address is set up correctly, see “IP Address Setup” on  
Check to ensure proper operation of other network connected devices.  
Network Setup fails (Auto).  
Check to ensure that the LAN cables are connected properly, see  
DHCP is not enabled on the router, or no router is present. Refer to your  
router’s documentation for instructions on enabling DHCP. If your router  
does not support DHCP, you must manually set up the IP address.  
Internet service is not available. Check your cable/DSL modem or contact  
your ISP for Internet service issues.  
Network Setup fails (Manual).  
Ensure that the TV IP address is not the same as any other device on the  
network.  
Example: IP address 192.168.0.100 and IP address 192.168.0.101  
are different addresses on the same network.  
Make sure the TV IP address is on the same subnet as the networked  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
166  
Network problems  
computer.  
Example of proper setup: The computer has the IP address  
192.168.0.100 with the Subnet mask 255.255.255.0, the TV has the  
IP address 192.168.0.101 with the Subnet mask 255.255.255.0; both  
are on the same subnet.  
Example of improper setup: The computer has the IP address  
192.168.1.100 with the Subnet mask 255.255.255.0, the TV has the  
IP address 192.168.0.101 with the Subnet mask 255.255.253.0; they  
are on different subnets.  
Unstable network connection.  
When using a wired home network connection, unplug the LAN cables,  
and then reconnect them.  
When using a wireless home network connection:  
Reboot the router:  
1
Remove AC power from the router and the television for  
approximately one minute.  
2
3
4
Reconnect AC power to the router.  
Reconnect AC power to the television and turn it On.  
After approximately two minutes, check connection stability.  
Connect with LAN cables, if possible, and check connection  
stability.  
Repeat the wireless network setup procedure and check connection  
stability.  
The media server name is not displayed.  
The LAN cables, if used, are not connected properly, see “Connecting the  
The WLAN, if used, is not configured properly.  
The network setup on the Server is incorrect. Make sure both the media  
server and TV are using the same network type (DHCP/manual) and have  
compatible network settings.  
Too many devices are connected. You cannot connect more than 32  
sharing devices at one time.  
The media server is not turned On.  
The “server” is not a media server device.  
Check the firewall and streaming settings on the media server.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Wireless network problems  
167  
Wireless network problems  
Check that the router/AP (Access point) power is On.  
After starting wireless network setup, confirm that the network is  
configured properly by performing the network connection test, see  
Check the router/AP’s connection status.  
If the router/AP does not support PBC or WPS, Easy Setup (PBC) will  
not work even if the push-button is pressed, see “Wireless Setup” on page  
113.  
If the available router/AP list is not displayed in Easy Setup (PBC) or  
Assisted Setup, the power of the router/AP may be Off. Check that it is  
On, and then try restarting the scan for available routers/APs, see “Easy  
Refer to the router/AP’s instruction manual.  
MediaShare problems  
Ensure that the devices (TV and Server) are connected correctly.  
Incorrect functionality may occur when using a USB HUB connection.  
Photo files that were processed and edited using the computer’s  
application software may not be viewable.  
When viewing content that supports two or more formats the TV may  
select one format automatically.  
Copyright protected content stored on the media server may not be  
playable on the TV.  
Content playback stability may be affected by heavy network traffic.  
Content originally recorded on a computer may not play correctly.  
Set the media sharing of the media server to the correct settings,  
according to the media server instruction manual.  
Confirm that the contents of either the media server or the USB storage  
device are in formats that are supported by this TV, see “MediaShare  
Depending on the media server, access may be limited by the MAC  
address. Set the server according to the media server’s instruction manual.  
This TV’s MAC Address can be confirmed in the Network Setup portion  
of the User Menu, see “MAC Address” on page 120.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
Light Indicator  
168  
For Connected MediaShare  
Depending on the media server, it may take time to display the list.  
Media Renderer  
Depending the state of this TV, Media Controller may not be able to  
control a Media Renderer playback.  
If Media Renderer playback starts regardless of the user's intention, set  
Media Renderer to Off.  
Light Indicator  
The Power light on the front of the TV indicates the TV’s status, as  
described below.  
Power On/Standby light  
Green:  
The TV is On and operating properly.  
Red:  
The power is Off or in Standby.  
If the problem persists after trying the solutions  
If you are experiencing a technical problem or have questions regarding  
operation, authorized service centers, warranty or parts, Toshiba Customer  
Support Center is read to help.  
(800) 631-3811 From inside the United States  
(949) 583-3050 From outside the United States  
Visit Toshiba's Support Web site  
support.toshiba.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Appendix A  
Specifications  
This model complies with the specifications listed below.  
Designs and specifications are subject to change without notice.  
This model may not be compatible with features and/or specifications  
that may be added in the future.  
NOTE  
Television system  
NTSC standard  
ATSC standard  
Digital Cable  
8VSB  
64 QAM, 256 QAM; in-the-clear, unencrypted  
Channel coverage  
VHF  
2 through 13  
UHF  
14 through 69  
Mid band (A-8 through A-1, A through I)  
Super band (J through W)  
Hyper band (AA through ZZ, AAA, BBB)  
Ultra band (65 through 94, 100 through 135)  
Cable TV  
169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Specifications  
Power source  
170  
Power source  
120 V AC, 60 Hz  
Power consumption  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
0.9 A (maximum current)  
0.3 W in Standby mode  
1.2 A (maximum current)  
0.3 W in Standby mode  
2.0 A (maximum current)  
0.3 W in Standby mode  
1.6 A (maximum current)  
0.3 W in Standby mode  
1.9 A (maximum current)  
0.3 W in Standby mode  
1.5 A (maximum current)  
0.3 W in Standby mode  
1.8 A (maximum current)  
0.3 W in Standby mode  
Audio power  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
7 W + 7 W  
7 W + 7 W  
7 W + 7 W  
10W + 10 W  
10W + 10 W  
10W + 10 W  
10W + 10 W  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Specifications  
Speaker type  
171  
Speaker type  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
Main 11.7cm x 4.0 cm (4 3/5 x 1 3/5 inch) x 2 pcs  
Main 11.7cm x 4.0 cm (4 3/5 x 1 3/5 inch) x 2 pcs  
Main 11.7cm x 4.0 cm (4 3/5 x 1 3/5 inch) x 2 pcs  
Main 15.0 cm x 3.0 cm (5 9/10 x 1 1/5 inch) x 2 pcs  
Main 16.5 cm x 2.8 cm (6 1/2 x 1 1/10 inch) x 2 pcs  
Main 16.5 cm x 2.8 cm (6 1/2 x 1 1/10 inch) x 2 pcs  
Main 3.5 cm x 7.5 cm (2/5 x 2 19/20 inch) x 2 pcs  
Video/audio terminals  
Video/audio input  
Video  
Audio  
1 V (p-p), 75 ohm, negative sync, NTSC.  
200 mV (rms) (-20dBFS)  
ColorStream® (component video) HD input  
Y: 1V (p-p), 75 ohm  
PR: 0.7V (p-p), 75 ohm  
Video  
PB: 0.7V (p-p), 75 ohm  
Suggested formats: 1080p (60Hz), 1080i (60Hz), 720p  
(60Hz), 480p, 480i  
Audio  
200 mV (rms) 22 k ohm or greater  
HDMIinput  
HDMIcompliant  
HDCP compliant  
Suggested formats  
HDMIAudio  
Dolby® Digital and 2-channel Linear-PCM; 32/44.1/48  
kHz sampling frequency; 16/20/24 bits per sample  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Specifications  
Wireless connection  
172  
Digital audio output  
Optical type  
PC input  
15-Pin D-sub Analog RGB  
Wireless connection  
Standard  
IEEE 802.11a/b/g/n/  
Host Interface  
USB 2.0 compatible  
5.15-5.35 GHz, 5.47-5.725 GHz, 5.725-5.850 GHz,  
2.400–2.473 GHz  
WEP 64/128, TKIP, AES, WPA/WPA2-PSK, WPS, None  
Frequency Range  
Security  
Ethernet  
IEEE 802.3.  
USB  
Universal Serial Bus Specification, Revison 1.1.  
Universal Serial Bus Specification, Revison 2.0.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Specifications  
Dimensions with table stand  
173  
Dimensions with table stand  
Width 28.9” (734 mm)  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
Height 19.8” (504 mm)  
Depth 7.2” (182 mm)  
Width 35.0” (889 mm)  
Height 23.3” (591 mm)  
Depth 8.0” (202 mm)  
Width 44.8” (1139 mm)  
Height 29.2” (742 mm)  
Depth 9.5” (242 mm)  
Width 51.4” (1306 mm)  
Height 33.2” (844 mm)  
Depth 13.2” (335 mm)  
Width 44.5” (1131 mm)  
Height 29.2” (741 mm)  
Depth 9.2” (233 mm)  
Width 51.4” (1306 mm)  
Height 33.5” (851 mm)  
Depth 13.1” (334 mm)  
Width 57.9” (1470 mm)  
Height 36.9” (938 mm)  
Depth 14.1” (357 mm)  
Weight (mass) with stand  
32L4300U  
39L4300U  
50L4300U  
58L4300U  
50L7300U  
58L7300U  
65L7300U  
15.0 lbs (6.8 kg)  
19.2 lbs (8.7 kg)  
38.4 lbs (17.4 kg)  
58.9 lbs (26.7 kg)  
42.5 lbs (19.3 kg)  
61.1 lbs (27.7 kg)  
79.8 lbs (36.2 kg)  
Operating conditions  
Temperature  
32º - 95º F (0º - 35º C)  
Humidity  
20 - 80% (no moisture condensation)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Specifications  
Supplied accessories  
174  
Supplied accessories  
Universal remote control (2x AAA” batteries)  
L7300U model number: CT-90428  
L4300U model number: CT-90428  
Resource Guide  
Pedestal and hardware  
Warranty information  
Wireless QWERTY keyboard with touchpad (2x AA batteries)  
(Not available in Mexico.)  
L7300U : supplied  
L4300U : not supplied  
IR blaster cable  
The Wireless QWERTY keyboard supplied with L7300U series is a standard  
U.S. layout keyboard. The accented characters for French and Spanish may  
not be available in certain cases.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Acceptable signal formats for PC IN and HDMI™  
175  
Acceptable signal formats for PC IN and HDMI™  
PC IN signal formats  
The PC IN on this TV only accepts signal formats which are compliant  
with VESA-DMT as in the table below. Since some PCs input signals  
are different from the resolution and frequency described in the table  
below, the following problems may occur: incorrect display, false  
format detection, picture position failure, blur, or judder. In these  
cases, set the monitor output format on your computer to conform to  
any of the signals in the table below.  
NOTE  
The signals whose vertical frequency is 56 Hz, 70 Hz, 72 Hz, or 75 Hz  
are converted to a 60 Hz signal.  
When you connect a computer to this TV, it is recommended that you  
set the refresh rate of your computer to 60 Hz.  
The PC IN on this TV does not accept the Sync on Green, Composite  
Sync, and Interlace signals.  
Format Resolution V. Frequency H. Frequency Pixel Clock  
VESA  
Standard  
(DMT)  
Frequency  
VGA  
640 x 480  
800 x 600  
59.940/60 Hz 31.469/31.500 kHz 25.175/25.200 MHz  
72.809 Hz  
75.000 Hz  
56.250 Hz  
60.317 Hz  
72.188 Hz  
75.000 Hz  
60.004 Hz  
70.069 Hz  
75.029 Hz  
59.995 Hz  
59.870 Hz  
74.893 Hz  
60.015 Hz  
37.861 kHz  
37.500 kHz  
35.156 kHz  
37.879 kHz  
48.077 kHz  
46.875 kHz  
48.363 kHz  
56.476 kHz  
60.023 kHz  
47.396 kHz  
47.776 kHz  
60.289 kHz  
47.712 kHz  
63.981 kHz  
79.976 kHz  
31.500 MHz  
31.500 MHz  
36.000 MHz  
40.000 MHz  
50.000 MHz  
49.500 MHz  
65.000 MHz  
75.000 MHz  
78.750 MHz  
68.250 MHz  
79.500 MHz  
102.250 MHz  
85.500 MHz  
108.000 MHz  
135.000 MHz  
SVGA  
XGA  
1024 x 768  
1280 x 768  
1360 x 768  
WXGA  
SXGA  
1280 x 1024 60.020 Hz  
75.025 Hz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Specifications  
Acceptable signal formats for PC IN and HDMI™  
176  
HDMIsignal formats  
The HDMIinputs on this TV only accept VGA, SVGA, XGA, WXGA,  
NOTE  
and SXGA signal formats which are compliant with VESA-DMT as in  
the table below. Since some computer, HDMI, or DVI device input  
signals are different from the resolution and frequency described in  
the table below, the following problems may occur: incorrect display,  
false format detection, picture position failure, blur, or judder. In these  
cases, set the monitor output format on your computer, HDMI, or DVI  
device to conform to any of the signals in the table below.  
The signals whose vertical frequency is 24 Hz, 56 Hz, 70 Hz, 72 Hz, or  
75 Hz are converted to a 60 Hz signal.  
When you connect a computer to this TV, it is recommended that you  
set the refresh rate of your computer to 60 Hz.  
Format Resolution V. Frequency H. Frequency Pixel Clock  
VESA  
Standard  
(DMT)  
Frequency  
VGA  
640 x 480  
800 x 600  
59.940 Hz  
72.809 Hz  
75.000 Hz  
56.250 Hz  
60.317 Hz  
72.188 Hz  
75.000 Hz  
31.469 kHz  
37.861 kHz  
37.500 kHz  
35.156 kHz  
37.879 kHz  
48.077 kHz  
46.875 kHz  
48.363 kHz  
56.476 kHz  
60.023 kHz  
47.396 kHz  
47.776 kHz  
60.289 kHz  
47.712 kHz  
63.981 kHz  
79.976 kHz  
25.175 MHz  
31.500 MHz  
31.500 MHz  
36.000 MHz  
40.000 MHz  
50.000 MHz  
49.500 MHz  
65.000 MHz  
75.000 MHz  
78.750 MHz  
68.250 MHz  
79.500 MHz  
102.250 MHz  
85.500 MHz  
108.000 MHz  
135.000 MHz  
SVGA  
XGA  
1024 x 768 60.004 Hz  
70.069 Hz  
75.029 Hz  
WXGA  
1280 x 768 59.995 Hz  
59.870 Hz  
74.893 Hz  
1360 x 768 60.015 Hz  
1280 x 1024 60.020 Hz  
75.000 Hz  
SXGA  
480i  
720 x 480i  
59.940/60 Hz 15.734/15.750 kHz 27.000/27.027 MHz  
480p  
720p  
1080i  
1080p  
720 x 480p 59.940/60 Hz 31.469/31.500 kHz 27.000/27.027 MHz  
1280 x 720p 59.940/60 Hz 44.955/45.000 kHz 74.176/74.250 MHz  
1920 x 1080i 59.940/60 Hz 33.716/33.750 kHz 74.176/74.250 MHz  
1920 x 1080p 23.976/24 Hz 26.973/27.000 kHz 74.176/74.250 MHz  
29.970/30 Hz 33.720/33.750 kHz 74.176/74.250 MHz  
59.940/60 Hz 67.433/67.500 kHz 148.352/148.500 MHz  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
Operating the TV with combination buttons  
177  
Operating the TV with combination buttons  
You can directly operate the TV power, input, picture size, and picture  
mode by pressing a combination button while holding down a color  
button.  
Button Color  
Combination Button  
INPUT  
Behavior/Mode  
Power Off  
POWER  
Power On  
1
Input 1  
2
Input 2  
3
Input 3  
4
5
Input 4  
Input 5  
RED  
6
Input 6  
7
Input 7  
8
Input 8  
0
ANT/CABLE  
MUTE  
Mute On  
1
2
3
4
5
6
7
8
Native (picture size)  
4:3 (picture size)  
TheaterWide 1 (picture size)  
TheaterWide 2 (picture size)  
TheaterWide 3 (picture size)  
Full (picture size)  
Normal (picture size)  
Dot by Dot (picture size)  
1/2 Mute On  
GREEN  
MUTE  
1
2
3
4
5
6
7
8
AutoView (picture mode)  
Dynamic (picture mode)  
Standard (picture mode)  
Movie (picture mode)  
- (picture mode)  
Store (picture mode)  
Game (picture mode)  
PC (picture mode)  
Mute Off  
YELLOW  
MUTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix B  
Wireless QWERTY  
keyboard with touchpad  
How to enter French or Spanish characters using the Wireless  
QWERTY keyboard with touchpad, which is included with L7300  
series  
For L4300 series, the Wireless QWERTY keyboard with  
touchpad must be purchased separately.  
For how to use the Wireless QWERTY keyboard with touchpad,  
refer to the User's Guide that comes with the keyboard.  
Setting the keyboard layout  
Before entering French or Spanish characters, configure the following  
setting on the TV:  
1
2
3
4
Press the SETUP button.  
Select Options > USB Keyboard Layout.  
Press the OK button.  
Press the  
/
(arrow) buttons to select U.S. International Layout  
p q  
and press the OK button.  
For how to enter characters, refer to the table below:  
The input characters may be different from the table below depending on  
the situation you are entering characters.  
NOTE  
178  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
179  
Printing Simultaneous Key  
normal  
Shift  
Right Alt(Alt Gr) Shift + Right Alt  
\
a and A  
b and B  
c and C  
d and D  
e and E  
f and F  
g and G  
h and H  
i and I  
a or A *1  
á or Á *1  
b or B *1  
c or C *1  
d or D *1  
e or E *1  
f or F *1  
g or G *1  
h or H *1  
i or I *1  
©
Ð
¢
ð
é or É *1  
í or Í *1  
j and J  
j or J *1  
k and K  
l and L  
k or K *1  
l or L *1  
m or M *1  
n or N *1  
o or O *1  
p or P *1  
q or Q *1  
r or R *1  
s or S *1  
t or T *1  
u or U *1  
v or V *1  
w or W *1  
x or X *1  
y or Y *1  
z or Z *1  
œ or Œ *1  
ø or Ø *1  
μ
ñ or Ñ *1  
ó or Ó *1  
ö or Ö *1  
ä or Ä *1  
®
m and M  
n and N  
o and O  
p and P  
q and Q  
r and R  
s and S  
ß
§
t and T  
þ or Þ *1  
ú or Ú *1  
u and U  
v and V  
w and W  
x and X  
y and Y  
z and Z  
1 and !  
2 and @  
3 and #  
4 and $  
5 and %  
6 and ^  
7 and &  
8 and *  
9 and (  
å or Å *1  
ü or Ü *1  
æ or Æ *1  
1
2
3
4
5
6
7
8
!
¡
²
³
¤
¼
½
¾
@
#
$
£
%
&
*
(
9
0 and )  
Spacebar  
- and _ (underscore)  
0
Space  
-
)
Space  
_
¥
(underscore)  
= and +  
[ and {  
=
[
+
{
×
«
÷
Download from Www.Somanuals.com. All Manuals Search And Download.  
180  
Printing Simultaneous Key  
normal  
Shift  
}
|
Right Alt(Alt Gr) Shift + Right Alt  
\
] and }  
]
\
;
»
¬
´
\backslash and |  
; and :  
‘ and “  
:
°
¨
Grave Accent(`) and  
Tilde(~)  
, and <  
. and >  
/ and ?  
,
.
/
/
*
-
+
1
2
3
4
5
6
7
8
9
0
.
<
>
?
/
*
-
ç or Ç *1  
¿
Keypad /  
Keypad *  
Keypad -  
Keypad +  
Keypad 1  
Keypad 2  
Keypad 3  
Keypad 4  
Keypad 5  
Keypad 6  
Keypad 7  
Keypad 8  
Keypad 9  
Keypad 0  
Keypad .  
+
*1: Character is Depends on CapsLock On/Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
181  
International Key  
To enter special characters, follow the table below:  
Diacritic press first press second  
(Dead key)  
Space  
E
É
È
Ë
Ê
e
é
è
ë
ê
A
Á
À
Ä
Ã
Â
a
á
à
ä
ã
â
O
Ó
Ò
Ö
Õ
Ô
o
ó
ò
ö
õ
ô
U
Ú
Ù
Ü
Ũ
Û
u
ú
ù
ü
ũ
û
Y
Ý
Ÿ
Ŷ
y
ý
ÿ
ŷ
I
Í
Ì
Ï
Ĩ
Î
i
í
ì
ï
ĩ
î
Z
z
R
r
Acute  
Grave  
Umlaut  
Tilde  
' or ´  
'
Ź
ź
Ŕ
ŕ
`
`
Shift + ' (")  
Shift + ` (~)  
¨
~
^
Circumflex Shift + 6 (^)  
Ž
ž
Breve  
Alt Gr +  
Shift + 9  
˘
ˇ
˝
˛
Ĕ
Ě
ĕ
ě
Ă
Ǎ
ă
ǎ
Ŏ
Ǒ
Ő
Ǫ
ŏ
ǒ
ő
ǫ
ō
Ŭ
Ǔ
Ű
Ų
Ū
ŭ
ǔ
ű
ų
ū
Ĭ
Ǐ
ĭ
ǐ
Háček  
Alt Gr +  
Shift + . (>)  
Ř
ř
Double  
acute  
Alt Gr +  
Shift + 2  
Ogonek  
Macron  
Overdot  
Alt Gr +  
Shift + 8  
Ę
ę
Ą
ą
Į
į
Alt Gr +  
Shift + 3  
¯
˙
.
Ē
Ė
ē
ė
Ā
Ȧ
ā
ȧ
Ō
Ȯ
Ȳ
ȳ
Ī
İ
ī
ı
Alt Gr + .  
·
o
Ż
ż
Underdot Alt Gr +  
Shift + -  
Ů
ů
Ring  
Alt Gr +  
Shift + 0  
0
Å
å
Diacritic press first press second  
(Dead key)  
Space  
M
m
N
Ń
Ǹ
n
ń
ǹ
P
p
W
w
S
s
G
g
K
k
L
l
C
c
Acute  
Grave  
Umlaut  
Tilde  
' or ´  
'
ḿ
Ś
ś
Ǵ
ǵ
Ĺ
ĺ
Ć
ć
`
`
Shift + ' (")  
Shift + ` (~)  
¨
~
^
Ñ
ñ
Circumflex Shift + 6 (^)  
Ŵ
ŵ
Ŝ
ŝ
Ĝ
Ğ
ĝ
ğ
Ĉ
Č
ĉ
č
Breve  
Alt Gr +  
Shift + 9  
˘
ˇ
˝
˛
Háček  
Alt Gr +  
Shift + . (>)  
Ň
ň
Š
š
Ǧ
ǧ
Ǩ
ǩ
Ľ
ľ
Double  
acute  
Alt Gr +  
Shift + 2  
Ogonek  
Macron  
Overdot  
Alt Gr +  
Shift + 8  
Alt Gr +  
Shift + 3  
¯
˙
.
Alt Gr + .  
Ġ
ġ
Ċ
ċ
Underdot Alt Gr +  
Shift + -  
Ring  
Alt Gr +  
Shift + 0  
0
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
Dolby® Digital Dynamic Range  
Numerics  
4/3 stretch  
A
Auto Aspect  
advanced picture settings  
ClearScan® 100  
C
cables  
3.5mm to RCA Y-cable 29  
coaxial (F-type) 26  
component video (red/green/blue)  
DynaLight® 100  
HDMI28  
standard A/V (red/white/yellow)  
26  
audio  
Audyssey Dynamic Volume®  
channels  
labeling analog TV channels  
182  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
183  
locking specific channels 79  
TV’s HDMI43  
specific channel 70  
control other devices  
HDMI-CEC Control 39  
control panel  
closed captions  
controlling other devices  
E
expert picture settings  
computer  
to the TV’s HDMI43  
using with the TV 85  
F
connecting  
Factory Defaults  
cable TV 30  
favorites  
computer to TV’s PC IN 41  
DVD player with ColorStream®  
H
DVI device to HDMIinput  
HDMI™  
HDMIaudio system 39  
HDMIdevice to HDMIinput  
HDMICEC  
adjusting amplifier’s audio 83  
controlling playback devices  
to a computer (no Internet  
to a home network (no Internet  
HDMICEC Control  
HDMIsettings feature  
to a home network (wired  
to a home network (wireless  
home network  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
185  
shared inputs  
configuring 69  
SmartTV  
SmartTV™  
Netflix® 127  
VUDU™ 128  
software keyboard  
software licenses  
software upgrade  
specifications  
time limit  
timer  
turn on TV 86  
contact Toshiba 168  
HDMI165  
HDMICEC Control problems  
MediaShare (Media Player)  
ColorStream® HD input 171  
HDMIinput 171  
HDMIsignal formats 176  
mass (weight) 173  
remote, combination buttons  
TV connections  
TV panel connections  
TV panel controls  
TV remote  
TV status information  
support information  
T
V
Video  
video input  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
186  
W
access web page 131  
adding favorites 131  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tektronix Telescope 1502C User Manual
Toshiba Copier e STUDIO281c User Manual
Toshiba Flat Panel Television 20HLV15 User Manual
Toshiba Flat Panel Television 65L9300U User Manual
Ultra Products Battery Charger ULT31792 User Manual
Uniden Telephone XCA750 User Manual
ViewSonic Car Video System VS15465 User Manual
ViewSonic Car Video System VS15560 User Manual
Wagan Power Supply ower Inverter User Manual
Wasp Bar Code Scanner WPS100 User Manual