Toshiba Flat Panel Television 22AV500U User Manual

Owner’s Manual

Integrated High Deﬁnition

LCD Television

HIGH-DEFINITION TELEVISION

22AV500U

Owner’s Record

The model number and serial number are on the back

of your TV. Record these numbers in the spaces below.

Refer to these numbers whenever you communicate

with your Toshiba dealer about this TV.

For an overview of steps for setting up your new TV, see page 9.

Note: To display a High Deﬁnition picture, the TV must be receiving

a High Deﬁnition signal (such as an over-the-air High Deﬁnition

TV broadcast, a High Deﬁnition digital cable program, or a High

Deﬁnition digital satellite program). For details, please contact

your TV antenna installer, cable provider, or satellite provider.

Model number:

Serial number:

VX3A00039300

VX1xxxxxxxxxx

Download from Www.Somanuals.com. All Manuals Search And Download.

Dear Customer,

Thank you for purchasing this Toshiba LCD TV. This manual will

help you use the many exciting features of your new LCD TV. Before

operating your LCD TV, please read this manual completely, and

keep it nearby for future reference.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat

Panel Display

Congratulations on your purchase! As you enjoy your

new product, please keep these safety tips in mind:

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

The Issue

• The home theater entertainment experience is a growing trend

and larger flat panel displays are popular purchases. However,

flat panel displays are not always supported on the proper stands

or installed according to the manufacturer’s recommendations.

• Flat panel displays that are

WARNING

RISK OF ELECTRIC SHOCK DO NOT

OPEN.

inappropriately situated on dressers,

bookcases, shelves, desks,

speakers, chests or carts may fall

over and cause injury.

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

TOSHIBA Cares!

• The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

The lightning ﬂash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude to

constitute a risk of electric shock to persons.

Tune Into Safety

•

One size does NOT fit all. Follow the manufacturer’s recommendations

for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for

proper use of this product.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

• Don’t allow children to climb on or play with furniture and

television sets.

• Don’t place flat panel displays on

furniture that can easily be used as

steps, such as a chest of drawers.

• Remember that children can

become excited while watching a

program, especially on a “larger

than life” flat panel display. Care

should be taken to place or install

the display where it cannot be

pushed, pulled over, or knocked down.

• Care should be taken to route all cords and

cables connected to the flat panel display so that they cannot be

pulled or grabbed by curious children.

: If you decide to wall mount this television, always

WARNING

use a UL Listed wall bracket appropriate for the size and weight of

this television. For more detail about UL Listed wall bracket, contact

a Toshiba Authorized Service Center.The use of any wall bracket

other than a UL Listed wall bracket appropriate for the size and

weight of this television for wall mounting this television could result

in serious bodily injury and/or property damage. See “Removing the

Pedestal Stand” ( page 5).

NOTE TO CATV INSTALLERS

Wall Mounting: If you decide to wall mount your

This is a reminder to call the CATV system installer’s attention to

Article 820-40 of the U.S. NEC, which provides guidelines for proper

grounding and, in particular, speciﬁes that the cable ground shall be

connected to the grounding system of the building, as close to the

point of cable entry as practical. For additional antenna grounding

information, see items 26 and 27 on page 4.

flat panel display, always:

• Use a mount that has been recommended by the display

manufacturer and/or listed by an independent laboratory (such

as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount

manufacturers.

• If you have any doubts about your ability to safely install your

flat panel display, contact your retailer about professional

installation.

• Make sure that the wall where you are mounting the display is

appropriate. Some wall mounts are not designed to be mounted

to walls with steel studs or old cinder block construction. If you

are unsure, contact a professional

installer.

• A minimum of two people are

required for installation. Flat panel

displays can be heavy.

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

15) CAUTION:

• To reduce the risk of electric shock, do not use the polarized

Read these instructions.

Keep these instructions.

Heed all warnings.

plug with an extension cord, receptacle, or other outlet

unless the blades can be inserted completely to prevent

blade exposure.

• To prevent electric shock, match wide blade of plug to wide

slot; fully insert.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

16) WARNING:

To prevent the spread of ﬁre, keep candles or other open ﬂames

away from this product at all times.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that

produce heat.

Installation, Care, and Service

Installation

Do not defeat the safety purpose of

Grounding

prong

the polarized or grounding type plug. A

polarized plug has two blades with one wider

than the other. A grounding type plug has

two blades and a third grounding prong. The

wide blade or the third prong are provided

Follow these recommendations and precautions and heed all warnings

when installing your TV:

17) Never modify this equipment. Changes or modiﬁcations may

void: a) the warranty, and b) the user’s authority to operate

this equipment under the rules of the Federal Communications

Commission.

for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

18)

DANGER: RISK OF SERIOUS PERSONAL INJURY,

DEATH, OR EQUIPMENT

DAMAGE!

10) Protect the power cord from being walked on

or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Never place the TV on an unstable

cart, stand, or table. The TV may fall,

causing serious personal injury, death, or

serious damage to the TV.

11) Only use attachments/accessories speciﬁed by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket,

or table speciﬁed by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

19) To avoid damage to this product, never place or store the TV in

direct sunlight; hot, humid areas; or areas subject to excessive

dust or vibration.

20) The apparatus shall not be exposed to dripping or splashing and

that no objects ﬁlled with liquids, such as vases, shall be placed

on the apparatus.

13) Unplug this apparatus during lightning storms or when

unused for long periods of time.

21) Never block or cover the slots or openings in the TV cabinet

14) Refer all servicing to qualiﬁed service personnel. Servicing

is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

back, bottom, and sides. Never place

the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains, or

walls; or

Additional Safety Precautions

14a) CAUTION: If the TV is dropped and the cabinet or enclosure

surface has been damaged or the TV does not operate normally,

take the following precautions:

• in a conﬁned space such as a

bookcase, built-in cabinet, or any other place with poor

ventilation.

The slots and openings are provided to protect the TV from

overheating and to help maintain reliable operation of the TV. Leave

a space of at least 4 (four) inches around the TV.

• ALWAYS turn off the TV and unplug the power cord to avoid

possible electric shock or ﬁre.

• NEVER allow your body to come in contact with any broken

glass or liquid from the damaged television. The LCD panel

inside the TV contains glass and a toxic liquid. If the liquid

comes in contact with your mouth or eyes, or your skin is

cut by broken glass, rinse the affected area thoroughly with

water and consult your doctor.

22) Always place the back of the television at least four (4) inches

away from any vertical surface (such as a wall) to allow proper

ventilation.

23) Never allow anything to rest on or roll over the power cord, and

never place the TV where the power cord is subject to wear or

abuse.

• ALWAYS contact a service technician to inspect the TV any

time it has been damaged or dropped.

24) Never overload wall outlets and extension cords.

25) Always operate this equipment from a 120 VAC, 60 Hz power

source only.

(continued)

ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

22” TV

Choosing a location for your LCD TV

VESA Mounting Pattern

To Display your LCD TV on the included Pedestal

Stand:

Observe the following safety precautions:

1) Read and Follow the pedestal assembly instructions.

Before beginning pedestal assembly, carefully lay the

CAUTION:

front of the LCD Panel face down on a ﬂat, cushioned surface

such as a quilt or blanket. Leave the bottom of the unit protruding

over the edge of the surface and assemble the pedestal as indicated

below.

Note: Extreme care should always be used when attaching

the pedestal stand to avoid damage to the LCD panel.

2) Place the TV on a sturdy, level surface that can support the

weight of the TV.

Five screws

To Display your LCD TV using a Wall Bracket:

If you decide to wall mount your LCD TV, always use a UL-listed wall

bracket appropriate for the size and weight of the LCD TV (ꢀ page 2) :

Two people are required for installation.

CAUTION:

2) Unplug and remove any cables and/or other component

connectors from the rear of the TV.

3) Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate bracket(s) are

attached to the wall and the back of the TV as described in the

instructions provided with the wall bracket.

4) After attaching the appropriate bracket(s) to the wall and the

back of the TV, remove the pedestal stand from the TV as

described below.

5) VESA Mounting Pattern

TV Size

22”

Hole Pattern(VxH)

Screw Size

100x100 mm

(unit in mm)

Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a ﬂat,

cushioned surface such as a quilt or blanket. Leave the stand

protruding over the edge of the surface.

Note: Extreme care should always be used when removing

the pedestal stand to avoid damage to the LCD panel.

2) Remove the screws shown in the right diagram below. This

will allow removal of the pedestal stand.

3) Once you have removed all screws holding the pedestal stand

in place, remove the pedestal stand from the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC Declaration of Conformity ENERGY STAR^®User Information

Compliance Statement

(Part 15):

ENERGY STAR User Information Statement: the factory default

settings of this television meet ENERGY STAR requirements.

Changing Picture Settings may increase energy consumption,

possibly beyond the limits required for ENERGY STAR

The Toshiba ꢀꢀAVꢃ00U Televisions comply with Part 15 of the

qualification.

FCC rules.

To ensure your television is operating at optimal energy

efficiency, select [Home] mode during initial activation. To

return to [Home] mode settings, select [Standard] picture mode.

[Standard] mode is recommended for normal home use.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that

may cause undesired operation.

The party responsible for compliance to these rules is:

Toshiba America Consumer Products, L.L.C.

82 Totowa Rd. Wayne, NJ 07470.

ENERGY STAR^®qualified TV. Products that

earn the ENERGY STAR prevent green house

gas emissions by meeting strict guidelines set

by the U.S. Environmental Protection Agency.

ENERGY STAR and the ENERGY STAR mark

are registered U.S. marks.

Ph: 1-800-631-3811

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

removing and applying power to the equipment, the user is

encouraged to try to correct the interference by one or more

of the following measures:

Important notes about your LCD

The following symptoms are technical limitations of LCD

Display technology and are not an indication of malfunction;

therefore, Toshiba is not responsible for perceived issues

resulting from these symptoms.

1) An afterimage (ghost) may appear on the screen if a fixed,

nonmoving image is displayed for a long period of time. The

afterimage is not permanent and will disappear in a short

period of time.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

2) The LCD panel contained in this TV is manufactured using

an extremely high level of precision technology; however,

there may be an occasional pixel (dot of light) that does not

operate properly (does not light, remains constantly lit, etc.).

This is a structural property of LCD technology, is not a

sign of malfunction, and is not covered under your warranty.

Such pixels are not visible when the picture is viewed from a

normal viewing distance.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Caution: Changes or modifications to this equipment not

expressly approved by Toshiba could void the user’s authority

to operate this equipment.

Note: Interactive video games that involve shooting a “gun”

type of joystick at an on-screen target may not work with this

TV.

Trademark Information

• Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Scrolling the TheaterWide^®picture

Important Safety Instructions .......................................... 3

Installation, Care, and Service ........................................ 3

(TheaterWide 2 and 3 only) ............................................40

Using the auto aspect ratio feature ........................................40

Selecting the cinema mode (480i and 1080i signals) ............40

Using the FREEZE feature....................................................40

Adjusting the picture .............................................................41

Selecting the picture mode..............................................41

Adjusting the picture quality...........................................41

Using the closed caption mode..............................................42

Base closed captions .......................................................42

Digital CC Settings ........................................................42

CC Selector.....................................................................42

Adjusting the audio................................................................43

Muting the sound ............................................................43

Using the digital audio selector.......................................43

Selecting stereo/SAP broadcasts.....................................43

Adjusting the audio quality.............................................44

Selecting the optical audio output format.......................44

Using the Dolby^®Digital Dynamic Range

Control feature..........................................................44

Using the Locks menu...........................................................45

Entering the PIN code.....................................................45

If you cannot remember your PIN code..........................45

Changing your PIN code.................................................45

Blocking TV programs and movies by rating (V-Chip)..45

Downloading an additional rating system for

blocking TV programs and movies ..........................46

Blocking channels...........................................................47

Unlocking programs temporarily....................................47

Using the input lock feature............................................47

Using the GameTimer^{®.........................................................................}48

Using the control panel lock feature...............................48

Using the PC settings feature.................................................49

Setting the PC Audio .............................................................49

Setting the sleep timer ...........................................................49

Displaying TV status information .........................................50

Understanding the auto power off feature .............................50

Understanding the last mode memory feature.......................50

Chapter 1: Introduction.................................................. 8

Features of your new TV .........................................................8

Overview of steps for installing, setting up,

and using your new TV.....................................................9

TV front and side panel controls and connections ................10

Chapter 2: Connecting your TV .......................................12

Overview of cable types ........................................................12

About the connection illustrations.........................................12

Connecting a VCR and antenna or Cable TV

(no Cable box).................................................................13

Connecting a VCR with S-video and a cable box .................14

Connecting a DVD player with ColorStream^®(component

video), a VCR, and a satellite receiver............................15

Connecting a camcorder........................................................16

Connecting an HDMI™ or DVI device to the HDMI input..17

Connecting a digital audio system.........................................18

Connecting a personal computer (PC)...................................19

Chapter 3: Using the remote control.................................20

Preparing the remote control for use .....................................20

Installing the remote control batteries ...................................20

Remote control effective range..............................................20

Learning about the remote control.........................................21

Using the remote control to control your other devices ........22

Remote Control functional key chart.....................................23

Programming the remote control to control your

other devices ...................................................................24

Remote control codes ............................................................25

Chapter 4: Menu layout and navigation .............................27

Main menu layout..................................................................27

Setup/Installation menu layout..............................................28

Navigating the menu system..................................................28

Chapter 5: Setting up your TV.........................................29

Selecting the menu language.................................................29

Configuring the antenna input source for the

Chapter 7: Using the TV’s advanced features ......................51

Using the advanced picture settings features.........................51

Using dynamic contrast...................................................51

Using the static gamma feature.......................................51

Selecting the color temperature ......................................51

Using CableClear^®digital noise reduction .....................52

Using MPEG noise reduction .........................................52

Using the Game Mode feature........................................52

ANT/CABLE terminal....................................................29

Programming channels into the TV’s channel memory ........30

Programming channels automatically.............................30

Manually adding and deleting channels

in the channel memory....................................................30

Labeling channels..................................................................31

Setting the HDMI™ audio mode...........................................32

Viewing the digital signal meter............................................33

Setting the time zone .............................................................33

Viewing the system status......................................................33

Chapter 8: Troubleshooting............................................53

General troubleshooting ........................................................53

Chapter 9: Appendix....................................................55

Specifications.........................................................................55

Acceptable signal formats for PC IN and HDMI terminals ..56

Limited United States Warranty for LCD Televisions

(23” and smaller) Depot Repair Warranty ......................57

Limited Canadian Warranty

Chapter 6: Using the TV’s features...................................34

Selecting the video input source to view...............................34

Labeling the video input sources...........................................34

Tuning channels.....................................................................35

™..............35

Tuning channels using the Channel Browser

Setting the Channel Tuning Mode ..................................37

Tuning to the next programmed channel ........................37

Tuning to a specific channel (programmed or

for Toshiba Brand Flat Panel Televisions..................58

unprogrammed)........................................................37

Switching between two channels using

Channel Return.........................................................37

Switching between two channels using SurfLock™ ......38

Selecting the picture size.......................................................38

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1: Introduction

Features of your new TV

The following are just a few of the many exciting features of

your new Toshiba widescreen, integrated HD, LCD TV:

• Integrated digital tuning (8VSB ATSC and QAM)

eliminates the need for a separate digital converter set-top

box (in most cases).

• Two HDMI™ digital, high-definition multimedia

interfaces 1080i input support (ꢀ page 17).

• HDMI new capability

Lip-Sync Latency activates an audio/video display timing

adjustment function that allows HDMI source devices to

accurately perform synchronization automatically.

• One set of ColorStream^®HD high-resolution component

video inputs (ꢀ page 15).

• Digital Audio Out optical audio connection with Dolby^®

Digital optical output format (ꢀ page 44).

• CableClear^®digital picture noise reduction (ꢀ page 52).

• PC IN (Analog RGB) computer terminal (ꢀ page 19).

• Channel Labeling allows you to put the Call Letters (e.g.

ABC, HBO, etc.) on the screen along with the station

numbers, so you always know what you’re watching

(ꢀ page 31).

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1: Introduction

10�See “Menu layout and navigation” for a quick overview

Overview of steps for installing,

setting up, and using your new TV

of navigating the TV’s menu system ( page 27).

11�^{Program channels into the TV’s channel memory}

( page 30).

1ꢀ�^{For details on using the TV’s features, see Chapters 6}

Follow these steps to set up your TV and begin using its many

exciting features.

and 7.

1ꢁ�^{For help, refer to the Troubleshooting Guide, Chapter 8.}

1� ^{Carefully read the important safety, installation, care,}

and service information. Keep this manual for future

reference.

1ꢄ�^{For technical specifications and warranty information,}

see Chapter 9.

1ꢃ�^{Enjoy your new TV!}

ꢀ� ^{Observe the following when choosing a location for the}

TV:

• Read “Important notes about your LCD TV”

( page 6).

• Place the TV on the floor or a sturdy, level, stable

surface that can support the weight of the unit. Secure

the TV to a wall, pillar, or other immovable structure

( page 3).

• Place the TV in a location where light does not reflect

on the screen.

• Place the TV far enough from walls and other objects

to allow proper ventilation. Inadequate ventilation may

cause overheating, which will damage the TV. THIS

TYPE OF DAMAGE IS NOT COVERED UNDER

THE TOSHIBA WARRANTY.

ꢁ� Do not plug in any power cords until AFTER you have

connected all cables and devices to your TV.

ꢄ� ^{BEFORE connecting cables or devices to the TV, learn}

the functions of the TV’s connections and controls

( pages 10–11).

ꢃ� ^{Connect your other electronic device(s) to the TV}

( pages 12–19).

ꢂ� ^{Install the batteries in the remote control (}^{page 20).}

ꢅ� ^{See “Learning about the remote control” (}^{page 21) for}

an overview of the buttons on the remote control.

8� ^{Program the remote control to operate your other}

device(s) ( pages 22–26).

9� ^{AFTER connecting all cables and devices, plug in the}

power cords for your TV and other devices. Then press

POWER on the TV control panel or remote control to turn

on the TV. If the TV stops responding to the controls on

the remote control or TV control panel and you cannot

turn the TV off or on, please unplug the power cords few

seconds then re-plug to try again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1: Introduction

TV front and side panel controls and connections

Model 22AV500U is used in this manual for illustration purposes.

Top panel

TV front

Right side panel

Control panel

Green LED

VOLUME WX — These buttons adjust the volume level.

Power LED (Green) = Power indicator

INPUT — Repeatedly press to change the source you are

viewing (ANT/CABLE, VIDEO, Color StreamHD, HDMI 1,

HDMI 2, PC).

Remote sensor — Point the remote control toward this

remote sensor (ꢀ “Remote control effective range” on

page 20).

POWER — Press to turn the TV on and off.

If the TV stops responding to the controls on the remote

control or TV control panel and you cannot turn off the

TV, press and hold the POWER button on the TV control

panel for 5 or more seconds to reset the TV.

ARROWS STWX — When a menu is on-screen, these

buttons function as up/down/left/right menu navigation

buttons.

MENU (ENTER) — Press to access the menu system (ꢀ

pages 27–28). When a menu is on-screen, the MENU

button on the TV’s control panel functions as the ENTER

button.

EXIT — Press to instantly close an on-screen menu.

CHANNEL ST — When no menu is on-screen, these

buttons change the channel (programmed channels only;

ꢀ page 30).

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1: Introduction

TV back panel connections

For an explanation of cable types and connections, see pages 12–19.

TV back

Power cord

HDMI™ IN — High-Definition Multimedia Interface input

receives digital audio and uncompressed digital video

from an HDMI device or uncompressed digital video

from a DVI device. Also see item 3. HDMI connection is

necessary to receive 1080i signals.

ANT/CABLE — Antenna input that supports analog

(NTSC) and digital (ATSC) off-air antenna signals and

analog and digital Cable TV (QAM) signals.

Digital Audio OUT — Optical audio output in Dolby

Digital or PCM (pulse-code modulation) format for

connecting an external Dolby Digital decoder, amplifier,

A/V receiver, or home theater system with optical audio

input.

Service port — For service use only. Used for updating

the television’s firmware.

PC/HDMI-1 (AUDIO) IN — PC audio input terminals are

shared with HDMI-1 analog audio input terminals, and

their use can be configured in the Audio Setup menu (ꢀ

page 51).

HDMI, the HDMI logo and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing LLC.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

PC IN — For use when connecting a personal computer.

ColorStream HD — The ColorStream^®high-definition

component video inputs (with standard stereo audio

inputs) for connecting devices with component video

output, such as a Toshiba DVD player with ColorStream^®.

Note: Component video cables carry only video

information; separate audio cables are required for a

complete connection.

VIDEO IN — Standard (composite) video and standard

audio inputs plus optional S-video inputs for connecting

devices with composite video or S-video output.

Note: Standard (composite) video and S-video cables

carry only video information; separate audio cables are

required for a complete connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

HDMI™ cable (with HDMI Logo “

”)

Overview of cable types

Cables can be purchased from most stores that sell audio/

video devices. Before purchasing any cables, be sure of

connector types required by your devices and the length of

each cable.

HDMI (High-Definition Multimedia Interface) cable is for

use with devices with an HDMI output. An HDMI cable

delivers digital audio and video in its native format. This

cable carries both video and audio information; therefore,

separate audio cables are not required for a complete HDMI

device connection ( page 17 and page 19).

Coaxial (F-type) cable

Note: HDMI cable provides better picture performance than

a standard (composite) video or S-video cable.

Coaxial (F-type) cable is used for connecting your antenna,

cable TV service, and/or cable converter box to the ANT/

CABLE input on your TV.

Optical audio cable

Standard A/V cables (red/white/yellow)

Optical audio cable is for connecting receivers with Dolby

Digital or PCM (pulse-code modulation) optical audio input

to the TV’s DIGITAL AUDIO OUT terminal ( page 18).

Standard A/V cables (composite video) usually come in sets

of three, and are for use with video devices with analog audio

and composite video output. These cables (and the related

inputs on your TV) are typically color-coded according to

use: yellow for video, red for stereo right audio, and white for

stereo left (or mono) audio.

Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable is for connecting a PC

to the TV’s PC IN terminal ( page 19).

S-video cable

About the connection illustrations

S-video cable is for use with video devices with S-video

output. Separate audio cables are required for a complete

connection.

You can connect different types and brands of devices to

your TV in several different configurations. The connection

illustrations in this manual are representative of typical

device connections only. The input/output terminals on your

devices may differ from those illustrated herein. For details

on connecting and using your specific devices, refer to each

device’s owner’s manual.

Note: An S-video cable provides better picture performance

than a composite video cable. If you connect an S-video

cable, be sure to disconnect the standard (composite) video

cable or the picture performance will be unacceptable.

Component video cables (red/green/blue)

Component video cables come in sets of three and are for

use with video devices with component video output.

(ColorStream^®is Toshiba’s brand of component video.) These

cables are typically color-coded red, green, and blue. Separate

audio cables are required for a complete connection.

Note: Component video cables provide better picture

performance than a standard (composite) video or S-video

cable.

1ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

Connecting a VCR and antenna or Cable TV (no Cable box)

From Cable TV or antenna

TV back panel

Stereo VCR

VIDEO

AUDIO

IN from ANT

OUT to TV

CH 3

CH 4

OUT

You will need:

To view the antenna or Cable signal:

• coaxial cables

Select the ANT/CABLE video input source on the TV.*

• standard A/V cables

To view the VCR:

Turn ON the VCR. Select the VIDEO video input source on

the TV.*

− For better picture performance, if your VCR has S-video,

use an S-video cable (plus the audio cables) instead of

the standard video cable. Do not connect both types of

video cable to VIDEO IN at the same time or the picture

performance will be unacceptable.

* To select the video input source, press INPUT on the remote control

( page 21). To program the TV remote control to operate other

devices, see Chapter 3.

− If you have a mono VCR, connect L/MONO on the TV

to your VCR’s audio out terminal using the white audio

cable only.

The unauthorized recording, use, distribution, or revision of television

programs, videotapes, DVDs, and other materials is prohibited under the

you to civil and criminal liability.

1ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

Connecting a VCR with S-video and a cable box

An S-video connection will provide better picture performance than a standard (composite) video cable.

From Cable TV

Cable box

TV back panel

Stereo VCR

You will need:

To view basic and premium Cable channels:

• coaxial cables

• S-video cable

− Do not connect both types of video cable to VIDEO IN

at the same time or the picture performance will be

unacceptable.

Turn OFF the VCR. Select the ANT/CABLE video input

source on the TV.* Tune the TV to channel 3 or 4 (whichever

channel the Cable box output is set to). Use the Cable box

controls to change channels.

• standard audio cables

To view the VCR:

− If you have a mono VCR, connect L/MONO on the TV

to your VCR’s audio out terminal using the white audio

cable only.

Turn ON the VCR. Select the VIDEO video input source on

the TV.*

* To select the video input source, press INPUT on the remote control

( page 21). To program the TV remote control to operate other

devices, see Chapter 3.

Note: When you use a Cable box, you may not be able to use

the remote control to program or access certain features on

the TV.

The unauthorized recording, use, distribution, or revision of television

programs, videotapes, DVDs, and other materials is prohibited under the

you to civil and criminal liability.

1ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream^®(component video), a VCR,

and a satellite receiver

Your TV has one set of ColorStream^®(component video) inputs.

DVD player with component video

TV back panel

From antenna

From satellite dish

Stereo VCR

Satellite receiver with component video

You will need:

• coaxial cables

To view satellite programs using the component

video connections:

• standard A/V cables

Turn on the satellite receiver. Select the ColorStream HD video

− For better picture performance, if your VCR has S-video,

use an S-video cable (plus the audio cables) instead of

the standard video cable. Do not connect both types of

video cable to VIDEO IN at the same time or the picture

performance will be unacceptable.

input source on the TV.*

To view the VCR or view and record antenna

channels:

Turn ON the VCR. Tune the VCR to the channel you want to

− If you have a mono VCR, connect L/MONO on the TV

to your VCR’s audio out terminal using the white audio

cable only.

watch. Select the VIDEO video input source on the TV.*

To record a TV program while watching a DVD:

• standard audio cables

• component video cables

Turn ON the VCR. Tune the VCR to the channel to record.

Select the ColorStream HD video input source on the TV* to

view the DVD.

− You can connect the component video cables (plus

audio cables) from the DVD player or satellite receiver to

ColorStream HD terminals on the TV. The ColorStream

HD terminals can be used with Progressive (480p, 720p)

and Interlaced (480i, 1080i) scan systems. A 1080i

signal will provide the best picture performance (1080p

is not supported).

* To select the video input source, press INPUT on the remote control

(ꢀ page 21). To program the TV remote control to operate other

devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television

programs, videotapes, DVDs, and other materials is prohibited under the

you to civil and criminal liability.

− If your DVD player or satellite receiver does not have

component video, connect a standard A/V cable to

VIDEO IN. If your DVD player has HDMI video, see page

17.

To view antenna or Cable channels:

Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream HD video

input source on the TV.*

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

Connecting a camcorder

You will need:

• standard A/V cables

− For better picture performance, if your camcorder has

S-video, connect an S-video cable (plus the audio cables)

to VIDEO IN on the TV back panel.

Camcorder

VIDEO AUDIO

OUT

VIDEO inputs on TV back panel

To view the camcorder video:

Select the VIDEO IN video input source on the TV.*

* To select the video input source, press INPUT on the remote control

( page 21). To program the TV remote control to operate other

devices, see Chapter 3.

1ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

To connect a DVI device, you will need:

• one HDMI-to-DVI adapter cable (HDMI type A connector)

per DVI device

− For proper operation, the length of an HDMI-to-DVI

adapter cable should not exceed 9.8 ft (3m). The

recommended length is 6.6 ft (2m).

Connecting an HDMI™ or DVI

device to the HDMI input

The HDMI input on your TV receives digital audio and

uncompressed digital video from an HDMI source device,

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) program material in digital form

from EIA/CEA-861-D–compliant^[1]consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

• one pair of standard analog audio cables per DVI device

− An HDMI-to-DVI adapter cable transfers video only.

Separate analog audio cables are required (see

illustration).

− See “Setting the HDMI™ audio mode” ( page 32).

TV back panel

The HDMI input can accept and display VGA, 480i (60Hz),

480p (60Hz), 720p (60Hz), and 1080i (60Hz) signal formats.

For detailed signal specifications, see page 60.

Supported Audio format: Linear PCM, sampling rate 32/44.1/

48 kHz

Note: To connect a PC to the HDMI input, see page 19.

To connect an HDMI device, you will need:

• one HDMI cable (type A connector) per HDMI device

− For proper operation, it is recommended that you use an

DVI device

HDMI cable with the HDMI Logo (

DVI/HDCP

OUT

VIDEO

AUDIO

− To display an 1080i/60Hz signal format, you will need a

Category 2 cable. Conventional HDMI/DVI cable may

not work properly.

OUT

− HDMI cable transfers both video and audio. Separate

analog audio cables are not required (see illustration).

Note: To ensure that the HDMI or DVI device is reset properly,

it is recommended that you follow these procedures:

− See “Setting the HDMI™ audio mode” ( page 32).

• When turning on your electronic components, turn on the

TV first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the TV.

TV back panel

[1] EIA/CEA-861-D compliance covers the transmission of

uncompressed digital video with high-bandwidth digital content

protection, which is being standardized for reception of high-

definition video signals. Because this is an evolving technology, it

is possible that some devices may not operate properly with the

TV.

HDMI device

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

VIDEO

AUDIO

HDMI OUT

OUT

To view the HDMI device video:

Select the HDMI 1, or HDMI 2 video input source on the

TV.*

* To select the video input source, press INPUT on the remote control

( page 21). To program the TV remote control to operate other

devices, see Chapter 3.

1ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

ꢄ� In the Optical Output Format field, select either Dolby

Connecting a digital audio system

The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby^®*

Digital or PCM, depending on your device (“Selecting

the optical audio output format” on page 45).

Audio Setup

Digital

or 2-channel down-mixed PCM (pulse-code

PC Audio

Auto

modulation) signal for use with an external Dolby^®Digital

decoder or other external audio system with optical audio

input.

HDMI 1 Audio

MTS

Stereo

Language

English

Optical Output Format

Dolby Digital

Dynamic Range Control

You will need:

Compressed

Done

• optical audio cable (Use an optical audio cable that has

the larger “TosLink” connector and not the smaller “mini-

optical” connector.)

Reset

Note:

Dolby Digital decoder or

other digital audio system

• Some audio systems may not be compatible with Dolby

Digital bitstream signals. Older audio systems that are

not compatible with standard optical out signals may

not work properly, creating a high noise level that may

damage speakers or headphones. THIS DAMAGE IS NOT

COVERED BY YOUR WARRANTY.

Optical

Audio IN

LINE IN

TV back panel

• The DIGITAL AUDIO OUT terminal may not output some

digital audio sources because of copy restrictions.

* Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are trademarks of Dolby Laboratories.

•

Menu item of Speakers can turn to OFF to mute the TV’s

built in speakers.

To control the audio:

1� Turn on the TV and the digital audio device.

ꢀ� ^Press

on the TV’s remote control and open the Audio

menu.

ꢁ� ^Highlight^{Audio Setup}^{and press}

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2: Connecting your TV

may be skipped or you may not be able to pause during

multi-angle scenes.

• Signal names for mini D-sub 15-pin connector

Connecting a personal computer

(PC)

Signal

name

Signal

name

Ground 11

Ground 12

Ground 13

Signal

name

Reserved

Pin No.

With either the PC IN or HDMI connection, you can watch

your computer’s display on the TV and hear the sound from

the TV’s speakers.

SDA

H-sync

V-sync

SCL

To connect a PC to the PC IN terminal on the TV:

When connecting a PC to the PC IN terminal on the TV,

use an analog RGB (15-pin) computer cable and a PC audio

Reserved 9

Reserved 10

Ground 15

To connect a PC to the HDMI terminal on the TV:

cable.

TV back panel

When connecting a PC to the HDMI terminal on the TV, use

an HDMI-to DVI adapter cable and analog audio cables.

If connecting a PC with an HDMI terminal, use an HDMI

cable (type A connector). Separate analog cables are not

necessary ( page 17).

TV back panel

PC audio cable

PC audio output

PC audio

output

Conversion adapter (if necessary)

• To use a PC, set the monitor output resolution on the PC

before connecting it to the TV. The PC IN terminal can

accept and display VGA, SVGA, XGA, and WXGA signal

formats. For detailed signal specifications ( page 56).

Other formats or non-standard signals will not be displayed

correctly.

The HDMI input can accept and display VGA, 480i (60Hz),

480p (60Hz), 720p (60Hz), and 1080i (60Hz) signal formats.

For detailed signal specifications, see page 56.

• To display the optimum picture, use the PC setting feature

( “Using the PC settings feature” on page 49).

Note:

• The edges of the images may be hidden.

• The PC audio input terminals on the TV are shared with the

HDMI-1 analog audio input terminals ( page 49).

• Some PC models cannot be connected to this TV.

• If receiving a 720p, or 1080i signal program, Native mode

scales the video to display the entire picture within the

borders of the screen (i.e. no overscanning).

• An adapter is not needed for computers with a compatible

mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the

PC on which you are playing the DVD-Video, some scenes

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

• When necessary to replace batteries in the remote control,

always replace both batteries with new ones. Never mix

battery types or use new and used batteries in combination

Preparing the remote control for

use

• .Always remove batteries from the remote control if they

are dead or if the remote control is not to be used for an

extended period of time. This will prevent battery acid from

leaking into the battery compartment.

Your TV remote control can operate your TV and many other

devices such as cable converter boxes, satellite receivers,

VCRs, DVD players, and HTIBs (home theater in a box),

even if they are different brands.

Remote control effective range

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate most

Toshiba devices ( page 24).

For optimum performance, aim the remote control directly

at the TV and make sure there is no obstruction between the

remote control and the TV.

If you have a non-Toshiba device or a Toshiba device

that the remote control is not preprogrammed to

operate:

You can program the TV remote control so it will operate the

other device ( pages 22–26).

Point remote control

toward remote sensor on

front of TV.

Installing the remote control

batteries

1 Remove the battery cover from the back of the remote

control.

16.4 ft (5m)

Squeeze tab

and lift cover.

2 ^{Install two “AAA” size batteries, making sure to match}

the + and – signs on the batteries to the signs on the

battery compartment.

3 ^{Reinsert the battery cover in the remote control until the}

tab snaps.

Caution: Batteries must not be exposed to excessive heat

such as sunshine, fire or the like.

Note:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal area.

• Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in

accordance with applicable laws and regulations.

• If the remote control does not operate correctly, or if the

operating range becomes reduced, replace batteries with

new ones.

ꢀ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

POWER turns the TV on and off. When the TV is on, the

green LED indicator on the TV front will be illuminated.

Learning about the remote control

FREEZE freezes the picture. Press again to restore the

moving picture ( page 40).

The buttons used for operating the TV only are described

here. For a complete list of the remote control’s functions, see

the remote control functional key chart ( page 23).

SLEEP accesses the sleep timer ( page 49).

PIC SIZE cycles through the picture sizes: Natural,

TheaterWide 1/2/3, Full, 4:3 HD, Native and Dot by

Dot ( page 39).

Channel Numbers (0–9, –/100) directly tune

channels. The

button is used to tune digital channels

( page 37) or to edit the Favorites List ( page 35).

INPUT selects the video input source ( page 34).

CH pq cycles through programmed channels when no

menu is on-screen ( page 30).

VOL + – adjusts the volume level.

FAV BROWSER accesses the Favorites List in the

Channel Brower™ ( page 35).

10 RECALL displays TV status information ( page 50).

11 CH RTN returns to the last viewed channel or source

( page 37).

12 MUTE reduces or turns off the sound ( page 43).

13 INFO displays TV status information as well as program

details, when available ( page 50).

While watching TV, these buttons open the

Channel Browser™ and tune to the previous/next channel

in the channel history ( page 36). (Also see “Arrow

buttons.”)

15 Arrow buttons (pqtu) When a menu is on-screen,

these buttons select or adjust programming menus. (Also

see

16 ENTER activates highlighted items in the main menu

system.

17 MENU accesses the main TV menu system ( pages 27

and 28).

18 EXIT closes on-screen menus.

19 MODE SELECT switch switches between TV,

CABLE/SAT, AUX 1, and AUX 2 modes ( page 22).

Set to “TV” to control the TV.

Note: The error message “NOT AVAILABLE” may appear if

you press a key for a function that is not available.

ꢀ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

POWER Turns the selected device on and off.

Channel Numbers (0-9) Press to directly access

channels (as opposed to ).

Using the remote control to

control your other devices

+10 Press to directly access DVD chapters higher than 10.

If you have a non-Toshiba device or a Toshiba device that the

remote control is not preprogrammed to operate, you must

first program the remote control to recognize the device (if

you have not already done so) ( pages 24–26).

TOP MENU Accesses a DVD’s top menu.

CH pq For channels programmed into the channel

memory ( page 30):

p selects the next higher channel.

q selects the next lower channel.

To use your TV remote control to operate a:

• Cable converter box or satellite receiver, set the MODE

SELECT switch to CABLE/SAT.

• VCR, set the MODE SELECT switch to AUX 1.

• DVD player or HTIB, set the MODE SELECT switch to

AUX 2.

GUIDE Displays the channel guide in the CABLE/SAT

mode.

SET UP Accesses a DVD’s setup menu in the AUX

mode.

INFO Displays TV status information on-screen.

Note: Even after the TV remote control is programmed, it

may not operate certain features on any other devices. If this

happens and you wish to use those features, you will need to

use the device’s original remote control.

pqtu Press to navigate DVD menus (may not work

on some DVD players).

ENTER Required by some satellite receivers and DVD

players to activate certain functions.

Point the remote control

directly at the device.

10 DVD CLEAR Press to reset the title and chapter number.

11 PLAY Begins playback of a tape or DVD.

12 PAUSE Press during play or record mode to pause the

picture; press again to restart.

13 STOP Stops the tape or DVD.

14 SKIP

Skips forward to locate later DVD chapters.

15 FF Fast-forwards the tape or DVD. (Press during play

mode to view the picture moving rapidly forward.)

16 SKIP

Skips back to beginning of current DVD

chapter, or locates previous chapters.

17 REW Rewinds/reverses the tape or DVD. (Press during

play mode to view the picture moving rapidly backward.)

18 TV/VCR To view one program while recording another,

press to select TV mode.

SEARCH selects a specific DVD chapter, title or time.

19 REC Starts tape recording.

20 MODE SELECT switch Set to “TV” to control the

TV; “CABLE/SAT” to control a cable converter box or

satellite receiver; “AUX 1” to control a VCR; “AUX 2” to

control a DVD player or HTIB.

ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

Remote Control functional key chart

Note:

• “---” = key does not send a signal in that remote control mode.

• “ TV” = key will affect the TV, even though the remote control is in another mode.

• * Not available for your TV.

REMOTE CONTROL KEY

POWER

SLEEP

PIC SIZE

FREEZE

Toshiba TV

Power

Sleep timer

Picture size

FREEZE

CABLE

Power

SAT (satellite) AUX 1 (VCR)

AUX ꢀ (DVD or HTIB)

Power

1-9

Digit 1-9

Digit 0

Digit 1-9

Digit 0

---

Digit 1-9

Digit 0

– (sub CH)

Digit 1-9

Digit 0

100

Digit 1-9

Digit 0

+10

100/–/+10

INPUT

FAV BROWSER/

TOP MENU

MUTE

– (sub CH)

TV/Video select

FAV BROWSER

DVD TOP Menu*

Sound mute

Guide*

---

Top Menu

---

SAT Guide

---

Setup

SET UP/GUIDE

VOL + –

Volume up/down

Channel

up/down

Channel

up/down

Channel

up/down

Channel

up/down

CHpq

---

RECALL

Previous channel

DVD previous menu*

Info

CH RTN/DVD RTN

---

DVD Return

INFO

ENTER

---

Info

Select, Enter

---

Display

Enter

Menu up/down

---

Menu up/down

Menu left

up/down

Menu left/

Channel Browser™

Menu right/

Channel Browser™

Menu left

---

Menu right

Action Menu

Exit

---

Menu right

DVD Menu

DVD Clear

Exit

DVD clear*

EXIT/DVD CLEAR

PAUSE/STEP

PLAY

STOP

SKIP

Pause*

Play*

Stop*

Skip REV*

Skip FWD*

Rewind*

---

Pause

Play

Stop

---

Pause

Play

Stop

Skip REV

Skip FWD

Rewind

Fast FWD

REW

Rewind

Fast FWD

Fast FWD*

TV/VCR/

REC

SLOW –

SLOW +

ANGLE

SUB TITLE

AUDIO

EJECT

DVD search*

---

TV/VCR

DVD search

REC MENU*

SLOW REW*

SLOW FWD*

Angle*

Sub title*

Audio*

---

Record (2 click) ---

---

DVD Angle

DVD Sub title

DVD Audio

DVD Eject

Eject*

ꢀꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

Programming the remote control

to control your other devices

Your Toshiba TV remote control is preprogrammed to operate

most Toshiba devices. To program your TV remote control to

operate a non-Toshiba device (or a Toshiba device that it is not

preprogrammed to operate), follow the steps below. For details

on using the remote control to operate the device, see page 22.

1 ^{In the remote control code table (}^{page 25), find the}

code for your device. If more than one code is listed, try

each one separately until you find one that works.

2 ^{Set the MODE SELECT switch}^{to the type of device}

you are programming the remote control to operate —

CABLE/SAT (for a cable converter box or satellite

receiver), AUX 1 (for a VCR or TV/VCR combo), or

AUX 2 (for a DVD player or HTIB [home theater in a

box]).

3 ^{While holding down}

, press the Channel Number

buttons to enter the 3-digit code for your device.

4 ^{To test the code, turn on the device, point the remote}

control at it, and press

. See notes below.

• If the correct code was entered, the device will turn

off.

• If the device does not respond, repeat steps 1–4 using

another code.

• If the device does not respond to another code, you

will need to use the remote control that came with the

device.

5 Remember to set the MODE SELECT switch back to

“TV” to control the TV.

6 ^{For future reference, write down the code(s) you used:}

DEVICE

CODE

DEVICE

CODE

Note:

• In addition to POWER, confirm that all necessary keys on

the TV remote control operate your device. If some keys are

not operational, repeat the device code setup using another

code (if other codes are listed for your device). If, after

trying all listed codes, the necessary keys do not operate

your device, use the device’s original remote control.

• Every time you change the batteries, you will need to

reprogram the remote control.

• Some newer VCRs respond to either of two codes. These

VCRs have a switch labeled “VCR1/VCR2.” If your VCR has

this kind of switch and does not respond to the codes for

your VCR brand, set the switch to the other position (“VCR1”

or “VCR2”) and reprogram the remote control.

ꢀꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

Drake

020, 040, 044, 046,

050, 053

018, 041, 051

057

Clarion

Classic

Daewoo

Denon

Emerson

Fisher

Funai

Go Video

GPX

019

020

021

Remote control codes

Echostar

Express Vu

Fujitsu

022, 023, 024, 025

026, 027

028

027

001, 029, 030

087

031

005, 032, 033, 034,

035

003, 007, 036, 042,

088

037

008, 009

004, 038

039

In some cases you may not be able

to operate your device with the TV

remote control. Your other device may

use a code that is not recognized by the

TV remote control. If this happens, use

the device’s remote control.

027

008, 009, 013

010, 011, 012, 022,

023, 031, 049

033

General Instruments

Hitachi

Hughes

Hughes Network

Systems

Intersat

033

Hitachi

019

048

027

017, 057

029

060

058

036, 052

JVC

Cable converter box

Janeil

JVC

Kenwood

Konka

Magnavox

Memorex

Mintek

ABC

061, 062, 063, 082,

084, 087, 092,

096, 098

Kenwood

Magnavox

Optimus

Pansat

Primestar

Proscan

Radio Shack

RCA

Realistic

Samsung

Sony

Star Choice

Star Trak

STS

Archer

065, 092, 097, 099

064, 094

092

090, 092, 097

083, 085, 086, 088,

093, 098

040

026

041

043

044

058

Cableview

Century

Citizen

NAD

015, 042

Nakamichi

Norcent

Onkyo

Oritron

Panasonic

008, 009, 013

022, 023, 030

008, 009, 013, 016

030

059

014, 055

057, 106

025, 026, 037, 054

024

000, 001, 002, 003,

004, 005, 006, 007,

020, 031, 056

021, 028, 030, 032,

035, 039, 043, 045,

047, 058

Contec

Diamond

093

061, 062

010, 045, 046, 047,

048, 049, 050

004, 051

052, 053, 054, 055

001, 056

057, 058

001, 002, 059, 089

060

061, 062, 086, 090

073

063, 091

064, 067

074

Gemini

Hamlin

069, 070, 094

093

Philips

Pioneer

Proscan

Qwestar

RCA

Sampo

Samsung

Sansui

Sanyo

Hitachi

Jasco

062, 095, 096

097

Toshiba

Motorola/GI/Jerrold

062, 069, 071, 082,

086, 089, 096, 107

072, 096

092, 104

090

101

081, 083, 085

087

Magnavox

Memorex

Multi Canal

Novavision

Panasonic

Philco

Uniden

Sharp

Sherwood

Sony

Zenith

027

011, 012, 065, 066,

068, 069, 070

027

071

072

Philips

066, 067, 068, 070,

072, 073, 074, 075,

092

TV/VCR Combo

Sylvania

Teac

Technics

Techwood

Toshiba

Action

078

059, 062

065

078

065

079

074

057

Pioneer

076, 077

075

Goldstar

Panasonic

Precision

Quasar

Realistic

Sony

Toshiba

Zenith

Totevision

Proscan

061, 062

000, 013, 076, 077,

078

079, 080, 081

014, 082, 092

Radio Shack

RCA

092, 097, 099

064, 081

Yamaha

Zenith

Realistic

065

Recoton

102

Samsung

Scientific Atlanta

077, 090

063, 078, 079, 080,

088, 098, 101, 105

095

Portable DVD player

065

009, 010, 065

Aiwa

093

Sears

Audiovox

Panasonic

RCA

094, 095

024, 096, 099

098

Signature

Signature 2000

Sprucer

062

096

081, 085

DVD/VCR Combo

Go Video

DVD=087,

VCR=081

DVD=088,

VCR=082

DVD=089,

VCR=083

DVD=090,

VCR=084

DVD=091,

VCR=085

DVD=092,

VCR=086

Starcom

069, 082, 087, 096,

VCR

103, 104

JVC

Admiral

Aiko

049

019

018

Stargate

069, 090

Sylvania

095, 100

RCA

Aiwa

Akai

TeleView

Texscan

090

100

003, 004, 037, 038,

039, 058, 069

010

007, 068

008, 017

010

026

019

Samsung

Sanyo

Zenith

Tocom

071, 084, 085

087, 096, 098

082

Audiovox

Bell & Howell

Broksonic

Calix

Carver

CCE

U. S. Electronics

United Cable

Universal

065, 092, 097, 099,

102, 103

Wards

096

Citizen

009, 010, 011, 012,

013, 014, 015, 019,

057, 073

DVD player

Satellite receiver

Aiwa

006, 015

016, 017

097

Alphastar

038, 059

Apex

BOSE

Broksonic

Colortyme

005

Chaparral

034

(continued)

DISH Network

057

018

ꢀꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3: Using the remote control

Craig

009, 010, 016, 061,

065, 079

001, 005, 009, 012,

014, 040, 048, 053,

056, 057

011, 013, 015, 017,

018, 019, 057, 078

078

Orion

054, 057, 062, 065,

068, 072

036, 045, 046, 057,

061, 072, 079

012, 024, 025, 035,

042, 053, 063

014

026, 027, 063

026, 031, 044, 057

006, 024, 043, 055

012, 013, 015

001, 002, 048

061

Video Concepts

Wards

005, 006, 011, 012,

039, 053

Curtis Mathes

Panasonic

Pentax

009, 010, 011, 016,

018, 020, 024, 025,

031, 035, 049, 051,

056, 057, 060, 065,

066, 079

Daewoo

Pentex Research

Philco

Philips

Pioneer

Portland

Proscan

Daytron

Denon

Dimensia

Electrohome

Emerson

White Westinghouse

XR-1000

Yamaha

073

018

063

001, 048

005, 006, 007, 014,

037, 053

004, 032, 034, 041,

047, 069, 086

010, 020, 065

003, 008, 010, 011,

017, 018, 020, 028,

039, 054, 057, 062,

065, 068, 072

007, 016, 021, 022,

023, 057, 064, 068,

070, 071, 079

004, 041

Zenith

Proton

Quasar

045

010, 031, 065

Radio Shack

Radio Shack/Realistic 007, 009, 010, 016,

HTIB

Fisher

018, 020, 021, 022,

031, 049

010

Lasonic

083

084

085

Panasonic

Venturer

Radix

RCA

Fuji

001, 002, 003, 009,

024, 025, 029, 035,

040, 042, 045, 048,

055, 056, 063, 071,

083

007, 009, 010, 011,

016, 018, 020, 021,

022, 031, 049, 051,

056, 060, 065, 075,

079

Funai

Garrard

018, 073

018

001, 002, 009, 040,

042, 048, 056

056, 059, 061, 081

005, 010, 014, 054,

056, 065, 067

018, 065

Go Video

Goldstar

Realistic

Gradiente

Harman Kardon

Hitachi

005

024, 025, 035, 037,

042, 063, 070, 080

076

Ricoh

Runco

Samsung

047

034

JBL

JC Penney

005, 006, 007, 008,

009, 010, 023, 024,

025, 026, 035, 056,

061, 063, 065

024, 025, 037, 050

005, 006, 007, 014,

037, 043, 055, 062,

063, 068, 082

005, 006, 007, 012,

014, 037, 043, 050,

053, 068, 071

010

009, 011, 038, 056,

073, 084

Sansui

Sanyo

006, 037, 043, 061

007, 009, 016, 054,

064, 068, 071, 075,

079, 085

008, 011, 017, 028,

030, 057, 065, 072

007, 010, 016, 021,

022, 023, 024, 025,

035, 053, 057, 063,

064, 065, 068, 071,

075, 079

013, 020, 031, 049,

051, 060, 066

004, 025, 032, 061

049

075

047, 061

004, 032, 033, 041,

052, 058, 070, 074,

076, 077, 080

035

018, 026, 027, 028,

044, 072

018, 050, 051, 053,

073, 079

007

010

037

Jensen

JVC

Scott

Sears

Kenwood

Kodak

Lloyds

Logik

LXI

Magnasonic

Magnavox

010

053, 073, 079

061

Sharp

010

Shintom

Signature

Signature 2000

Singer

061, 065, 078

026, 027, 034, 044,

057, 061, 072

005, 006, 007, 012,

014, 026, 053, 067

007, 009, 010, 016,

018, 034, 049, 063,

065, 066, 068, 075,

079

020, 028, 039

056

024, 025, 035, 063

020, 024, 025, 028,

039, 043, 065

049

Marantz

Sony

Memorex

STS

Sylvania

MGA

MGN

Minolta

Mitsubishi

Symphonic

Tandy

Tashiko

Tatung

Teac

Technics

Teknika

Toshiba

Montgomery Ward

Motorola

MTC

Multitech

NEC

018, 029, 037

036

049

009, 046, 061

009, 012, 018

005, 006, 007, 012,

014, 037, 043, 053,

054, 067, 070

010

009

010, 049, 065

031

010, 018, 065

000, 011, 021, 023,

024, 028, 030, 039,

057, 074, 078, 079

009, 010, 065

073

Totevision

Unitec

Unitech

Nikko

Noblex

Optimus

Optonica

009

Vector Research

005, 006, 011, 012,

053

ꢀꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 4: Menu layout and navigation

Main menu layout

The tables below and on the next page provide a quick overview of your TV’s menu system.

To open the main menus (illustrated below), press on the remote control or TV control panel.

Option

Icon

Item

Mode

 Sports/Standard/Movie/PC/Preference

 [Opens the Picture Settings menu]

 [Opens the Noise Reduction menu]

 On/Off

Video

Picture Settings

Noise Reduction

Game Mode

Theater Settings

Digital Audio Selector

Audio Settings

Audio Setup

 [Opens the Theater Settings menu]

 [Launches the temporary Audio Selector]

 [Opens the Audio Settings menu]

 [Opens the Audio Setup menu]

 [Launches the temporary CC Selector]

 Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4

 [Opens the Digital CC Setup menu]

 [Opens the Input Labeling menu]

 [Opens the Channel Labeling menu]

 English / Français / Español

Audio

CC Selector

Preferences

Base CC Mode

Digital CC Settings

Input Labeling

Channel Labeling

Menu Language

Channel Browser Setup

Enable Rating Blocking

Edit Rating Limits

Channels Block

Input Lock

 [Opens the Channel Browser Setup menu]

 Off/On

Locks

 [Opens the Edit Rating Limits menu]

 [Opens the Channels block menu]

 Off/Video/Video+

Control Panel Lock

GameTimer

 Off/On

 Off/30 min/60 min/90 min/120 min

 [Opens the New PIN Code entry screen]

 [Opens the Installation menu ( page 28)]

 [Opens the Sleep Timer menu]

 [Opens the PC Settings menu]

New PIN Code

Installation

Setup

Sleep Timer

PC Settings

ꢀꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 4: Menu layout and navigation

Setup/Installation menu layout

The Installation menu contains the Terrestrial and System Status menus.

To open the Installation menu (illustrated below), press on the remote control or TV control panel, open the Setup menu,

select Installation, and press

Icon

Item

Option

Input Configuration

 [Opens the Input Configuration menu]

Terrestrial

 [Start]  [Scans for new channels on

Channel Program

ANT/CABLE]

Channel Add/Delete

 [Opens the Channel Add/Delete menu]

Channel Tuning Mode

 Standard/Auto/Digital

 Pacific/Alaska/Hawaii/Atlantic/Newfoundland/Eastern/Central/

Time Zone

Mountain

Signal Meter

 [Opens the Signal Meter menu]

System Status

System Information

 [Opens the System Information screen]

Note:

Navigating the menu system

• The menu background may sometimes appear black,

depending on the signal the TV is receiving. This is not a

sign of malfunction.

• The Video sub-menu appears with a black background,

which looks different from other menus.

You can use the buttons on the remote control or TV control

panel to access and navigate your TV’s on-screen menu

system.

• Press

to open the menu system.

• When a menu is open, use the up/down/left/right arrow

buttons (pqtu) on the remote control or TV control

panel to move in the corresponding direction in the menu.

• Press

to save your menu settings or select a highlighted

item. (A highlighted menu item appears in a different color

in the menu.)

• All menus close automatically if you do not make a

selection within 60 seconds, except the signal meter menu,

which closes automatically after about 5 minutes.

• To close a menu instantly, press

ꢀ8

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5: Setting up your TV

Selecting the menu language

Configuring the antenna input

source for the ANT/CABLE terminal

You can choose from three different languages (English,

French and Spanish) for the on-screen display of menus and

messages.

To configure the ANT/CABLE input source:

To select the menu language:

Press

and open the Setup menu.

Highlight Installation and press

Press

and open the Preferences menu.

Highlight Menu Language and press u.

Press p or q to select your preferred menu language

and press

(A new set of Installation menu icons will appear, as

shown below.) Open the Terrestrial menu, highlight Input

Configuration, and press

Press

to close the Preferences menu.

Press t or u to select the input source (Cable or

Antenna) for the ANT/CABLE input on the TV.

To save your new settings, highlight Done and press

To revert to your original settings, highlight Cancel and

press

ꢀ9

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5: Setting up your TV

(A new set of Installation menu icons will appear, as

Programming channels into the

TV’s channel memory

shown below.) Open the Terrestrial menu, highlight

Channel Program to bring up the Start, and press

again to begin channel programming.

When you press

on the remote control or TV

control panel, your TV will stop only on the channels you

programmed into the TV’s channel memory.

Follow the steps below to program channels into the TV’s

channel memory.

Programming channels automatically

Your TV can automatically detect all active channels in your

area and store them in its memory. After the channels are

programmed automatically, you can manually add or erase

individual channels in the channel memory.

Note:

• You must configure the ANT/CABLE input source before

programming channels ( page 29).

• The automatic channel programming process will erases

channels that were previously programmed into the TV’s

memory.

• To tune the TV to a channel not programmed in the channel

memory, you must use the Channel Number buttons on the

remote control.

The TV will automatically cycle through all the antenna

channels, and store all active channels in the channel

memory. While the TV is cycling through the channels,

the message “Scanning channels, please wait” appears (as

shown above).

• Programming channels when the ANT/CABLE input is

configured for Cable will take substantially longer than

when the antenna input is configured for Antenna. This is

normal; however, once channel programming is finished,

you should not have to repeat the programming process

again unless your Cable TV service lineup changes

significantly.

To cancel channel programming, press

control (or highlight Cancel in the on-screen display and

press ).

When channel programming is finished, press

view the programmed channels.

on the remote

•

Manually adding and deleting channels in

the channel memory

To program channels automatically:

After automatically programming channels into the channel

memory, you can manually add or delete individual channels.

Configure the antenna input source, if you have not

already done so ( page 29).

Press

and open the Setup menu.

To add or delete channels in the channel memory:

Highlight Installation and press

From the Setup menu, highlight Installation and press

A new set of Installation menu icons will appear.

Open the Terrestrial menu, highlightChannel Add/

Delete, and then press

To add a channel to the channel memory:

Highlight the unchecked box next to the channel number you

want to add, and then press to check the box.

(continued)

ꢁ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5: Setting up your TV

To manually add digital subchannels on a physical

channel:

Use the Channel Numbers and the Dash ( ) on the remote

control to enter the channel number (for example, 56–1).

If the channel is found, the number will be added to the list

and the box will be checked.

Labeling channels

A list of common channel labels (logos) for various channels

(ABC, CBS, etc.) will be programmed into the TV. You will

be able to view and assign these logos from the Channel

Labeling window. If the desired channel label is not provided

in the list, you will be able to manually enter/edit labels using

the software keyboard.

If the channel is not found, a message will appear.

To remove a channel from the channel memory:

Highlight the checked box next to the channel number you

To assign channel labels:

want to remove, and then press

to uncheck the box.

Press

and open the Preferences menu.

To save your new settings:

Highlight Channel Labeling and press

The Channel Labeling window opens.

Highlight Done and press

Press

Press pqtu to highlight the desired channel label and

press

to select the channel you want to label.

To revert to your original settings:

Highlight Cancel and press

before saving.

Repeat steps 3 and 4 for other channels.

To remove all channels from the channel memory:

Highlight Reset and press , and then highlight Done and

To save your settings, highlight Done and press

press

Note: A video preview of the currently highlighted channel is

provided to assist you in adding/deleting channels.

To remove encrypted channels from the channel

memory:

If an encrypted channel is accidentally added to the channel

list by programming channels, you can remove the unwanted

encrypted (non-viewable) channel while you are channel

surfing. When you tune into an encrypted channel, the

following message will appear.

The maximum number of labels that can be stored is 128.

To remove channel labels:

Open the Channel Labeling window.

Press or to select the channel for which you want

to remove the label.

Press pqtu to highlight No Label and press

Repeat steps 2 and 3 for other channels.

To save your settings, highlight Done and press

Press

while the message is on the screen to remove the

unnecessary channel from the channel list.

If the desired channel label is not available from the list of

presets, you can create a custom label.

(continued)

ꢁ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5: Setting up your TV

To create and assign a custom label:

Setting the HDMI™ audio mode

Open the Channel Labeling window.

Press or to select a channel you want to label.

To set the HDMI audio mode:

Press pqu to highlight Custom and press

The software keyboard will appear.

Press

and open the Audio menu.

Highlight Audio Setup and press

Press p or q to select HDMI 1 Audio and then press

t or u to select the HDMI 1 audio mode (Auto, Digital,

or Analog). (Auto is the recommended mode.) See

“Connecting an HDMI or DVI device to the HDMI

input” ( page 17).

Repeatedly press the corresponding key on the remote

control to highlight the desired character on the on-screen

software keyboard.

The highlighted character is entered after you either press

a different key, press u key, or after a two-second pause.

Repeat steps 4 and 5 until you have entered all desired

text.

When finished, press

Mode

Description

New labels will be added to the list in alphabetical order

and marked with an icon to indicate that they are

custom. Highlight the new custom label and press

assign.

Assigned channel labels will be displayed in the banner,

Channel Add/Delete, Channels Block, and Channel Browser .

When viewing the HDMI 1 input, if

digital audio from the HDMI input is

available, it will be output. If not, the

TV will automatically detect and output

analog audio from the PC Audio input.

Auto

When viewing the HDMI 1 input,

digital audio from the HDMI input will

be output.

Digital

Analog

To delete the custom label:

When viewing the HDMI 1 input,

analog audio from the PC Audio input

will be output.

Open the Channel Labeling window.

Highlight the label to be deleted and press

Highlight Yes from the deletion confirmation window

and press

To save your settings, highlight Done and press

Note: Because the PC and HDMI-1 inputs share the same set

of analog audio inputs, the PC Audio menu setting influences

the HDMI 1 Audio menu setting. If PC Audio is set to “No,”

the HDMI 1 Audio setting changes to “Auto.” If PC Audio is

set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and

is grayed out in the menu. (Also see item 3 on page 11 and

“Setting the PC Audio” on page 49.)

Highlight Done and press

back to the Channel Labeling window.

to save changes, and go

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5: Setting up your TV

Viewing the digital signal meter

Viewing the system status

You can view the digital signal meter in the ANT/CABLE

digital TV input source only.

To view the system status:

Press

and open the Setup menu.

To view the digital signal meter:

Highlight Installation and press

A new set of Installation menu icons will appear, as

shown below. Open the System Status menu, highlight

System Information, and press

Press tu to scroll through the menu bar to select the

Software Version and view the related information.

Press

and open the Setup menu.

Highlight Installation and press

A new set of Installation menu icons will appear, as

shown below. Open the Terrestrial menu, highlight

Signal Meter, and press

Press pqtu to select the antenna input and digital

channel whose signal you want to check.

To close the screen and return to the Installation

menu:

Highlight Done and press

Note:

•

The physical digital channel number listed in the

Signal Meter screen may not correspond to a virtual

TV channel number. Contact your local broadcasters

to obtain the RF channel numbers for your local digital

stations.

The signal strength does not change between virtual

channels on the same physical channel.

To return to normal viewing:

Press

•

Reset Factory Defaults

To reset all settings and channels to their factory

default values:

To close the screen and return to the Terrestrial

menu:

Press

and open the Setup menu.

Highlight Done and press

Highlight Installation and press . A new set of

Installation menu icons will appear.

To return to normal viewing:

Press

Open the System Status menu, highlight System

Information, and press

Press tu to scroll through the menu bar to select

Factory Defaults.

Setting the time zone

The Time Zone setup will allow you to specify the correct

time zone for your region. This feature will allow the TV

status information to show the correct time zone information

( page 50).

Enter your PIN code (or 0000 if no PIN code has been set).

Highlight Yes and press . The TV will turn off

automatically after a few seconds. After the TV turns off,

unplug the TV power cord and then plug it in again to

complete the reset process.

To set the time zone:

From the Setup menu, highlight Installation and press

A new set of Installation menu icons will appear.

To cancel the reset:

Highlight No and press

Highlight Time Zone Setup, and press

Press pqtu to select the region, highlight Done, and

then press

After the time zone has been set, you will be asked to set the

current Daylight Saving Time status.

To set the Daylight Saving Time status:

Press t or u to select Yes or No, highlight Done, and then

press

ꢁꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Selecting the video input source

to view

Labeling the video input sources

You can label each video input source according to the type

of device you connected to each source, from the following

preset list of labels:

• – – (default label)

To select the video input source to view:

• Audio Receiver

• Cable

• Compact Disc

• DTV

• DVD

• Game Console

• HDMI Switch (HDMI inputs only)

• Laser Disc

• Satellite/DSS

1� ^Press

on the remote control or TV control panel.

2� ^{And then either:}

a) Press 0–7; or

b) Repeatedly press  on the remote control and then

press

c) Repeatedly press

control panel to change the input.

The current signal source displays in the top right corner

of the Input Selection screen.

to change the input; or

on the remote control or TV

• VCR

• Video Recorder

Input Selection

ANT/CABLE

• Hide (to hide an unused input in the Input Selection screen and

ANT/CABLE

Video

in the Channel Browser™ Inputs list)

ColorStream HD

HDMI 1

Note: If you select PC in the Input Selection screen, you can

choose only “– –” “Game Console” or “Hide” as the label.

HDMI 2

To label the video input sources:

1� ^Press

and open the Preferences menu.

INPUT

to Select

Navigation

2� ^{Highlight Input Labeling and press}

Note:

• You can label the video input sources according to the

specific devices you have connected to the TV

( “Labeling the video input sources” at right).

• Sources can be “hidden” ( “Labeling the video input

sources” at right).

• “No Video Signal” will appear randomly on the screen if no

signal is received in video input mode.

3� ^Press or  to highlight the video source you want to

label.

Input Labeling

Video

VCR

Video Recorder

DTV

ColorStream HD

HDMI 1

HDMI 2

Satellite/DSS

Reset

Done

(continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

ꢄ� Press t or u to select the desired label for that input

Tuning channels

source. If a particular input is not used, you can select

Hide as the label, which will cause that input to be “grayed

out” in the Input Selection screen and skipped over when

Tuning channels using the

Channel Browser

you press

on the remote control.

™

ꢃ� ^{To save the new input labels, highlight Done}^and

press

To revert to the factory default labels, highlight Reset and

press

The Channel Browser™ provides an easy navigation interface

for all your channels and inputs. This feature allows you to:

• Navigate the contents of all of your inputs.

• Keep a list of your favorite channels (see “Favorites

Browser,” below).

• Keep a history of the last 32 channels or inputs viewed.

• Quickly surf and tune your recently viewed channels/inputs

from the Channel Browser™ History List (illustrated on

the next page).

• Surf via Browse mode (to immediately tune channels as

you highlight them in the Channel Browser™) or Select

mode (to surf over channels in the Channel Browser™

before you select one to tune).

Input labeling example:

The screen below left shows the default Input Selection screen

(with none of the inputs labeled as a specific device). The

screen below right is an example of how you could label the

inputs if you connected a VCR to VIDEO, a video recorder

to ColorStream HD, a DTV set-top box to HDMI 1, and a

satellite/DSS set-top box to HDMI 2.

Input Selection

ANT/CABLE

Input Selection

ANT/CABLE

Video

ANT/CABLE

VCR

ColorStream HD

HDMI 1

Video Recorder

DTV

• Quickly change inputs from the Inputs List.

HDMI 2

Satellite/DSS

Favorites Browser

The Favorites Browser allows you to quickly set up a favorite

channels/inputs list that is integrated into the Channel Browser™.

INPUT to Select

Navigation

INPUT to Select

Navigation

Input Selection screen with

no inputs labeled.

Input Selection screen with

all inputs labeled.

To add a favorite channel/input:

1� ^{Tune to the channel or input.}

ꢀ� ^{Press and hold}

for 3 seconds.

To clear the input labels:

Note: Additions are added to the beginning of the Favorites

list on the left side of the Channel Browser™.

1� ^Press

ꢀ� ^{Highlight Input Labeling}^{and press}

ꢁ� ^{Highlight Reset}^{and press}

and open the Preferences menu.

To delete a favorite channel/input:

1� ^Press

to open the Favorites browser list.

ꢀ� ^{Highlight the channel or input to delete by pressing}

t or u.

ꢁ� ^{Press and hold}

for 3 seconds. The channel/input will

be removed from the Favorites list.

To set up the Channel Browser™:

1� ^{From the Preferences menu, highlight Channel Browser}

Setup and press

ꢀ� ^Pressp to highlight Navigation, and then press t or u

to select either Browse Mode or Select Mode.

ꢁꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

ꢁ� Press q to highlight History List, and then press t or u to

• Pressing

will bring up the Channel Browser™

Favorites list regardless of the last selected list in the Channel

Browser™.

select the setting you prefer: either On, or Off.

Note: History List will be cleared every time the TV is

powered off.

To tune to a channel or input in Browse mode:

ꢄ� ^Pressq to highlight ANT/CABLE List, and then press t or

1� While watching TV, press t or u to open the

Channel Browser™ and surf back to a previous item or

surf forward to the next item in the list.

u to select On or Off.

ꢃ� ^Pressq to highlight Inputs List, and then press t or u to

select On or Off.

In Browse mode, when you stop on an item in the

Channel Browser™, it will be highlighted and the TV

will automatically tune to the channel or input.

ꢂ� ^Pressq to highlight Favorites List, then press t or u to

select On or Off.

ꢅ� ^{To save your entries, highlight Done}^{and press}

ꢀ� ^Pressto close the Channel Browser™.

To return to factory defaults, highlight Reset and press

To tune to a channel or input in Select mode:

1� ^{While watching TV, press}t or u to open the

Channel Browser™ and surf back to a previous item or

forward to the next item in the list.

To open the Channel Browser™:

• Press t or u on the remote control.

• Press t to surf backward through the previously tuned

32 channels in the History list, the channels in the ANT/

CABLE channel list, the inputs in the Inputs list, or the

favorite channels/inputs in the Favorites list.

In Select mode, when you stop on an item in the Channel

Browser™, it will be highlighted but you must press

to tune the TV to the highlighted item.

ꢀ� ^Press

to tune the TV to the highlighted item.

• Press u to surf forward through the channel History, the

ANT/CABLE channel list, the Inputs list, or the favorite

channels/inputs in the Favorites list.

ꢁ� ^Pressto close the Channel Browser™.

Adding and clearing channels and inputs in the

History List

Elements of the ChannelBrowser™

Adding channels and inputs to the History List:

As a channel or input is tuned, the Channel Browser™ adds

it to the History List and displays it on the “right side” of the

Channel Browser™. Previously tuned channels/inputs are

“shifted” to the left, eventually moving off the left side. Press

t to surf backward through the previously tuned channels/

inputs. Any channel or input that is tuned repeatedly will not

be repeated in the History List, but instead is moved to the

end of the list on the right side of the Channel Browser™.

Current list (History, ANT/CABLE, Inputs, or Favorites)

Input type

The Channel Browser™ will store the following channels:

• All channels that are tuned using the numeric buttons on the

remote control.

Channel or input currently being viewed

Channel or input that is currently highlighted in the

browser

• All channels that are tuned using

control.

on the remote

Channels stored in the History List

Channel labels

Note: Whenever an item is selected that cannot be tuned

(for various reasons), the TV will automatically tune to the

previously viewed channel or input.

To toggle among the available lists:

After opening the Channel Browser™, press p or q to

toggle among History, ANT/CABLE, Inputs, and Favorites.

Note:

• The Channel Browser™ opens in History List by default.

Once another list has been selected, the Channel Browser™

will open in the last selected list.

• If all lists are turned off, pressing t, u, or

will not display the Channel Browser™. If Favorites List is

(continued)

turned off,

will have no effect.

ꢁꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Clearing channels from the History List:

• Reconfiguring the ANT/CABLE input will clear the History

List.

Tuning to the next programmed channel

To tune to the next programmed channel:

Press

on the remote control or TV control panel.

Note: See page 29 for details on configuring the antenna

input.

Note: This feature will not work unless you program channels

into the TV’s channel memory ( page 30).

• Once 32 channels or inputs are stored in the History List, the

oldest item will be removed from the list when a new channel

or input is tuned.

Tuning to a specific channel (programmed

or unprogrammed)

• Turning off the TV will clear the History List.

Setting the Channel Tuning Mode

Tuning analog channels:

Press the Channel Number (0–9) on the remote control. For

This feature allows you to choose how tuning will be handled

for analog and digital channels when the TV is in Antenna

mode.

example, to select channel 125, press 1, 2, 5, then

Tuning digital channels:

Note: To use this feature, the Input Configuration must be

set to Antenna ( page 29).

Press the Channel Number (0–9) on the remote control,

followed by the dash ( ) button and then the sub-channel

number. For example, to select digital channel 125-1, press 1,

The channel tuning mode has three options.

2, 5, –, 1, then

Mode

Description

Note: If a digital channel is not programmed—either through

the automatic channel scan ( page 30) or the channel

add/delete function ( page 30)—you will have to tune the

Both analog and digital channels can be

tuned normally

Standard

Digital channels will have priority when

manually entering a channel number using

the Channel Number (0-9) on the remote

control, analog channels can still be tuned

RF channel using the Channel Number and dash (

remote control.

) on the

Auto

(default)

Switching between two channels using

Channel Return

The Channel Return feature allows you to switch between two

channels without entering an actual channel number each time.

, if available

Digital

Only digital channels can be tuned

Note: Digital mode will be most useful after analog channels

are shut down by the government in 2009.

1� ^{Select the first channel you want to view.}

To set the Channel Tuning Mode:

ꢀ� ^{Select a second channel using the Channel Number}

buttons (and the dash ( ) button if selecting a digital

channel).

1� ^{From the Setup menu, highlight Installation and press}

A new set of Installation menu icons will appear.

ꢀ� ^{Open the Terrestrial}^{menu, highlight Channel Tuning}

Mode, and then press u and p q to select your desired

mode.

ꢁ� ^Press

on the remote control. The previous channel

will display. Each time you press , the TV will switch

back and forth between the last two channels that were

tuned.

Note:

• The Channel Add/Delete & Channels Block windows as well

as the Channel Browser ANT/CABLE list will be updated

automatically when you change the mode. Also, the History

List will be cleared, but the Favorites List will be saved.

• Even if the Channel Tuning Mode is set to Digital, analog

channel 3 will still be the default channel to prevent the

initial case where no digital channels have been found in

prior channel scans. (Channel Add/Delete will not have

anything listed until a scan is done.)

Note: If you press

will return to the last-viewed input.

from a non-antenna input, the TV

ꢁꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Switching between two channels using

SurfLock™

Selecting the picture size

You can view many program formats in a variety of picture

sizes—Natural, TheaterWide 1, TheaterWide ꢀ, TheaterWide

ꢁ, Full, ꢄ:ꢁ HD, Native and Dot by Dot.(available in PC Mode

Only)

The SurfLock™ feature temporarily “memorizes” one channel

to the

from any other channel by pressing

channel to the button:

button, so you can return to that channel quickly

. To memorize a

Note: The “picture size” illustrations are examples only. The

format of the image (in any of the picture sizes) will vary

depending on the format of the signal you are currently

watching. Select the picture size that displays the current

program the way that looks best to you.

1� ^{Tune the TV to the channel you want to program into the}

button.

ꢀ� ^{Press and hold}

for about 2 seconds until the message

“Memorized” appears on-screen. The channel has been

programmed to the button.

You can save separate picture size preferences for each input

on your TV.

ꢁ� ^{You can then change channels repeatedly, and when you}

press

, the memorized channel will be tuned.

To select the picture size using the remote control:

1� ^Press

on the remote control.

The TV will return to the memorized channel one time only.

Once you press and then change channels again, the CH

RTN memory will be cleared and the button will function as

Channel Return, by switching back and forth between the

last two channels that are tuned.This feature also works for

external inputs.

ꢀ� ^{While the Picture Size}^{screen is open, you can do one of}

the following to select the desired picture size:

• Repeatedly press

• Press the corresponding Number button (0–6) while the

Picture Size screen is open.

• Press p or q while the Picture Size screen is open.

To select the picture size using the menus:

1� ^{Select Picture Size in the Theater Settings menu.}

ꢀ� ^Presst or u to select the desired picture size setting.

ꢁ� ^{Highlight Done}^{and press}

Note: Some of the picture sizes may not be available

depending on the receiving signal format (those will be

“grayed out” in the Picture Size screen).

Using these functions to change the picture size (i.e.,

changing the height/ width ratio) for any purpose other than

your private viewing may be prohibited under the Copyright

Laws of the United States and other countries, and may

subject you to civil and criminal liability.

Note: If you select one of the TheaterWide^®picture sizes, the

top and bottom edges of the picture (including subtitles or

captions) may be hidden. To view the hidden edges, either

scroll the picture (TheaterWide 2 and 3 only) or try viewing

the program in Full or Natural picture size.

ꢁ8

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Picture Size

4:3 HD

Natural

(for 720p, and 1080i program sources only)

Some program formats will display with sidebars and/or bars

at the top and bottom.

Picture is not distorted from original size.

Native

TheaterWide 1

(for 480i (HDMI), 480p (HDMI), 720p, and 1080i

signal programs)

(for 4:3 format programs)

The center of the picture remains close to its original

proportion, but the left and right edges are stretched wider to

fill the screen.

• If receiving a 480i (HDMI), 480p (HDMI), 720p, or 1080i,

signal program, Native mode scales the video to display

the entire picture within the borders of the screen (i.e. no

overscanning).

• This is especially useful for external HD sources such as

DVHS movies, or PC graphics.

TheaterWide 2

(for letter box programs)

Note:

• This mode is supported only for HDMI (1080i, 720p, 480p,

and 480i), ColorStream (1080i and 720p), and ANT/CABLE

(digital) inputs (1080i, and 720p).

A B C D E F G - - - - - - - - - - - - - - - -

• Depending on the input signals, the border of the picture

may be hidden, displayed in black, or noisy.

The top and bottom edges of the picture may be hidden*.

TheaterWide 3

(for letter box programs with subtitles)

Dot by Dot

(for VGA, SVGA, XGA, and WXGA sources only)

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

The top and bottom edges are hidden*.

The “Dot by Dot” picture is non-scaling display.

Depending on the input signal formats, picture is displayed

with sidebars and/or bars at the top and bottom. (Example:

VGA input source)

Full

(for 16:9 [480i, 480p] source programs only)

* To view the hidden areas (such as subtitles or captions), see

“Scrolling the TheaterWide^®picture” (page 40).

• If receiving a squeezed 4:3 format program, the picture

is stretched wider to fill the width of the screen, but not

stretched taller.

• None of the picture is hidden.

ꢁ9

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

To turn on the auto aspect ratio feature:

1 Press

Scrolling the TheaterWide^®picture

and open the Video menu.

2 ^{Highlight Theater Settings and press}

(TheaterWide 2 and 3 only)

3 ^{In the Auto Aspect Ratio field, select On.}

You can set separate scroll settings for the TheaterWide 2 and

TheaterWide 3 modes for each input.

4 ^{To save the new settings, highlight Done and press}

To revert to the factory defaults, highlight Reset and

To set the scroll settings:

press

1 Press

and open the Video menu.

2 ^{Highlight Theater Settings and press}

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed) from a DVD

player connected to the VIDEO, ColorStream HD (component

video), or HDMI inputs on the TV, smoother motion can be

obtained by setting the Cinema Mode to Film.

3 ^{In the Picture Size field, select either TheaterWide 2 or}

To set the Cinema Mode to Film:

(available for 480i and 1080i signals)

TheaterWide 3 (you cannot scroll in any other mode).

4 ^PressT to highlight the Picture Scroll field.

5 ^PressW or X to scroll the picture up and down as needed.

1 ^Press

and open the Video menu.

2 ^{Highlight Theater Settings and press}

6 ^{To save the new settings, highlight Done and press}

To revert to the factory defaults, highlight Reset and press

3 ^{In the Cinema Mode field, select Film.}

4 ^{To save the new settings, highlight Done and press}

Note: When receiving a signal at 480i resolution, the picture

scroll function may have limited adjustment range.

To revert to the factory defaults, highlight Reset and

press

Using the auto aspect ratio feature

To set the Cinema Mode to Video:

Select Video in step 3 above.

When the auto aspect ratio feature is set to On, the TV

will automatically select the picture size when one of the

following input sources is received:

• A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE

input

Using the FREEZE feature

To use the FREEZE feature:

• A 480i signal from the VIDEO.

• A 480i signal from the ColorStream HD.

• A 480i, 480p, 720p, 1080i, or VGA (60Hz) signal from the

HDMI 1/2 input

1 ^{When viewing the TV, press}

to make the picture a

again (or any

still picture.

2 ^{To return to the moving picture, press}

Aspect ratio of Automatic aspect size (automatically

signal source selected when Auto Aspect is On)

other button).

Note: If the TV is left in FREEZE mode for more than 15

minutes, the FREEZE mode will automatically be released

and the TV will return to moving picture.

4:3 normal

Natural (with sidebars)

4:3 letter box TheaterWide 2

16:9 full

Full

Using the FREEZE function for any purpose other than your

private viewing may be prohibited under the Copyright

Laws of the United States and other countries, and may

subject you to civil and criminal liability.

Not defined

(no ID-1 data The current picture size you set under

or HDMI

“Selecting the picture size” on page 38.

aspect data)

Note: The auto aspect ratio feature is not applicable to PC

input.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Adjusting the picture quality

Adjusting the picture

You can adjust the picture quality (Contrast, Backlight,

DynaLight™, Brightness, Color, Tint, and Sharpness) to your

personal preferences.

Selecting the picture mode

You can select your desired picture settings from four different

modes, as described below.

Selection

Contrast

Backlight*

DynaLight**

Brightness

Color

Pressing t

lower

Pressing u

higher

Mode

Picture Quality

darker

On/Off

darker

paler

lighter

Sports

Standard

Bright and dynamic picture (factory setting)

Standard picture settings (factory setting)

On/Off

lighter

Lower contrast for darkened room (factory

setting)

deeper

Movie

Tint

reddish

softer

greenish

sharper

Designed for viewing of PC tables and

documents

Sharpness

* Backlight

Preference

Your personal preferences

This feature adjusts the brightness of the entire screen. When in

video mode and no signal is input, this will automatically be set to 0.

(Settings are stored in memory.)

Note: PC mode is available for HDMI and PC inputs only

(grayed out for other input sources).

**DynaLight

This function automatically strengthens the black coloring of dark

areas in the video according to the level of darkness.

To select the picture mode using the menu system:

To adjust the picture quality:

1� Press

and open the Video menu.

1� ^Press

and open the Video menu.

ꢀ� ^{Highlight Mode}^{and press}

ꢀ� ^{Highlight Picture Settings}^{and press}

ꢁ� ^Pressp or q to select the picture quality you want to

adjust (Contrast, Backlight, DynaLight, Brightness, Color,

Tint, or Sharpness), and then press t or u to adjust the

setting, as described in the table above.

ꢄ� ^{To save the new settings, highlight Done}^{and press}

You can use any of the picture modes ( “Selecting the

picture mode,” above left) as a starting point for adjusting

the picture settings.

ꢁ� ^Pressp or q to select the picture mode you prefer and

press

To revert back to the base mode that you began adjusting

the picture settings from, highlight Reset and press

The picture qualities you adjusted are automatically saved in

the Preference mode ( “Selecting the picture mode,” above

left) until Reset is selected.

Note: The picture mode you select affects the current

input only. You can select a different picture mode for

each input.

ꢄ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Digital CC Settings

Using the closed caption mode

You can customize the closed caption display characteristics

by changing the background color, opacity, text size, type,

edge, and color.

Base closed captions

Note:

The closed caption mode has two options:

• This feature is available for digital channels only.

• You cannot set the Caption Text and Background as the

• Captions—An on-screen display of the dialogue, narration,

and sound effects of TV programs and videos that are closed

captioned (usually marked “CC” in program guides).

• Text—An on-screen display of information not related to

the current program, such as weather or stock data (when

provided by individual stations).

same color.

To customize the closed captions:

1� Press

and open the Preferences menu.

ꢀ� ^{Highlight Digital CC Settings}^{and press}

ꢁ� ^Pressp or q to highlight the characteristic you want to

change, and then press t or u to select the format for that

characteristic (see table below).

To view captions or text:

1� Press

and open the Preferences menu.

ꢀ� ^{Highlight Base CC Mode}^{and press}u.

ꢄ� ^{To save the new settings, highlight Done}^{and press}

To revert to the factory defaults, highlight Reset and

ꢁ� ^Pressp or q to select the desired closed caption mode and

press

Caption Size

Auto, Small, Standard, Large

• To view captions:

Highlight CC1, CCꢀ, CCꢁ, or CCꢄ. (CC1 displays translation

of the primary language in your area.)

Auto, Default, Mono w. Serif, Prop. w.

Serif, Mono w/o Serif, Prop. w/o Serif,

Casual, Cursive, Small Capitals

Caption Text

Type

Caption Text

Edge

Auto, None, Raised, Depressed, Uniform,

Left Drop Shadow, Right Drop shadow

Caption Text

Color

Auto, Black, White, Red, Green, Blue,

Yellow, Magenta, Cyan

Text Foreground Auto, Transparent, Translucent Flashing,

Opacity

Solid

Note: If the program or video you selected is not closed

captioned, no captions will display on-screen.

Background

Color

Auto, Black, White, Red, Green, Blue,

Yellow, Magenta, Cyan

• To view text:

Highlight T1, Tꢀ, Tꢁ, or Tꢄ.

Text Background Auto, Transparent, Translucent Flashing,

Opacity

Solid

Caption Text

Edge Color

Auto, Black, White, Red, Green, Blue,

Yellow, Magenta, Cyan

CC Selector

You can use the CC Selector to temporarily override the

default analog caption mode (set in Base CC Mode) for a

particular channel. However, once you change to another

analog channel, the closed caption setting will automatically

change back to the current Base CC Mode setting.

You can also use the CC Selector to select digital closed

caption services (if available). When such services are not

available, the CC Selector presents a default list of services. If

the selected service is not available, the next best service will

be used instead.

Note: If text is not available in your area, a black rectangle

may appear on screen. If this happens, set the Base CC

Mode to Off.

• To turn off the closed caption mode:

Select Off in step 3 above.

Note: A closed caption signal may not display in the following

situations:

• When a videotape has been dubbed

• When the signal reception is weak

• When the signal reception is non-standard

To select closed captions:

1� ^Press

and open the Preferences menu.

ꢀ� ^{Highlight CC Selector}^{and press}

ꢁ� ^Pressp or q to select Closed Caption, and then press t

or u to select the desired service.

ꢄ� ^Press

ꢄꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Selecting stereo/SAP broadcasts

Adjusting the audio

The multi-channel TV sound (MTS) feature allows you to

output high-fidelity stereo sound. MTS also can transmit a

second audio program (SAP) containing a second language,

music, or other audio information (when provided by

individual stations).

Muting the sound

Press

on the remote control to partially reduce (1/2 MUTE)

or turn off (MUTE) the sound. Each time you press

mute mode will change in the following order:

, the

When the TV receives a stereo or SAP broadcast, the word

“STEREO” or “SAP” appears on-screen when

is pressed.

The MTS feature is only available for analog signals on the

ANT/CABLE input.

1/2 Mute

Mute

Volume

If the closed caption mode is set to Off when you select

“MUTE” mode, the closed caption feature is automatically

activated if the TV program is Closed Captioned. To mute

the audio without automatically activating the closed caption

To listen to stereo sound:

1� Press

and open the Audio menu.

ꢀ� ^{Highlight Audio Setup}^{and press}

ꢁ� ^{In the MTS}^{field, select Stereo.}

ꢄ� ^{To save the new settings, highlight Done}^{and press}

feature, use

to set the volume to 0. See “Using the closed

caption mode” ( page 42) for more information on closed

caption modes.

To reset the settings to the factory defaults, highlight

Reset and press

Using the digital audio selector

Note:

You can use the Digital Audio Selector to conveniently switch

between audio tracks on a digital channel (for those channels

that have multiple audio tracks). This temporarily overrides

the audio track chosen by the language option under Audio

Setup ( “Selecting stereo/SAP broadcasts” on page 43).

• You can typically leave the TV in Stereo mode because

it will automatically output the type of sound being

broadcast (stereo or monaural).

• If the stereo sound is noisy, select Mono to reduce the

noise.

To use the digital audio selector:

To listen to an alternate language on an ATSC digital

station (if available):

Highlight the Language field in step 3 above, and then press

1� ^Press

and open the Audio menu.

ꢀ� ^{Highlight Digital Audio Selector}^{and press}

t or u to select the language you prefer.

To listen to a second audio program on an analog

station (if available):

Select SAP in step 3 above.

Note:

• A second audio program (SAP) can be heard only on

those TV stations that offer it. For example, a station might

broadcast another language as a second audio program.

If you have SAP on, you will see the current program on the

screen but hear the other language instead of the program’s

normal audio.

ꢁ� ^Pressp or q to select Audio, and then press t or u to

select the desired service.

ꢄ� ^Press

• If you have SAP on and the station you are watching is

not broadcasting a second audio program, the station’s

normal audio will be output. However, occasionally there is

no sound at all in SAP mode. If this happens, set the MTS

feature to Stereo mode.

ꢄꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Adjusting the audio quality

Using the Dolby^®Digital Dynamic Range

Control feature

You can adjust the audio quality by adjusting the bass, treble,

and balance.

This dynamic range control feature causes the ATSC dynamic

range to be further compressed, allowing you to switch from

ATSC to analog broadcasts at the same dynamic range.

To adjust the audio quality:

1� Press

and open the Audio menu.

ꢀ� ^{Highlight Audio Settings}^{and press}

To use the Dolby Digital Dynamic Range Control:

1� ^Press

and open the Audio menu.

ꢁ� ^Pressq or p to highlight the item you want to adjust

(Bass, Treble, or Balance).

ꢀ� ^{Highlight Audio Setup}^{and press}

ꢄ� ^Presst or u to adjust the level.

ꢁ� ^{In the Dolby Digital Dynamic Range Control}^{field, select}

Compressed. When Standard is selected, the audio is

output with minimal compression.

•

t makes the bass or treble weaker or increases the

balance in the left channel (depending on the item

selected).

ꢄ� ^{To save the new settings, highlight Done}^{and press}

•

u makes the bass or treble stronger or increases the

To revert to the factory defaults, highlight Reset and

balance in the right channel (depending on the item

selected).

press

Note:

ꢃ� To save the new settings, highlight Done and press

• This item will be grayed out for NTSC signals, Video,

ColorStream, and PC inputs.

To reset the settings to the factory defaults, highlight

Reset and press

• The Dolby Digital Dynamic Range Control will function in

relation to Optical Output Format (PCM mode).

Selecting the optical audio output format

You can use this feature to select the optical audio output

format when you connect a Dolby Digital decoder or other

digital audio system to the Optical Audio Out terminal on the

TV (see “Connecting a digital audio system” on page 18).

To select the optical audio output format:

1� ^Press

and open the Audio menu.

ꢀ� ^{Highlight Audio Setup}^{and press}

ꢁ� ^{In the Optical Output Format}^{field, select either Dolby}

Digital or PCM, depending on your device.

ꢄ� ^{To save the new settings, highlight Done}^{and press}

To revert to the factory defaults, highlight Reset and

press

ꢄꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Blocking TV programs and movies

by rating (V-Chip)

Using the Locks menu

The Locks menu includes the Enable Rating Blocking, Edit

Rating Limits, Channels Block, Input Lock, Front (control)

Panel Lock, and New PIN Code features. You can use these

features after entering the correct PIN code.

Some TV programs and movies include signals that classify

the content of the program (violence, sex, dialog, language).

The V-Chip feature in this TV detects the signals and blocks

the programs according to the ratings you select. (For rating

descriptions, see the tables on the next page.)

Entering the PIN code

1� Press

and highlight the Locks menu icon.

To block and unblock TV programs and movies:

1� Press

and highlight the Locks menu icon.

ꢀ� ^Pressq to display the PIN code entering screen.

ꢁ� ^{Enter your four-digit PIN code and press}

ꢄ� ^Pressq to highlight Enable Rating Blocking.

ꢃ� ^Pressu and q to select On, and then press

ꢀ� ^Pressq, which displays the PIN code entry screen.

• The Lock System screen (below) appears if a PIN

code has not been stored. Press the Channel Number

buttons to enter a new four-digit code, enter the code a

second time to confirm, and press

ꢂ� ^Pressq to highlight Edit Rating Limits and press . The

Edit Rating Limits screen (below) appears.

ꢅ� ^Presspqt u and then press

to select the level of

blocking you prefer. A box with an “ ” is a rating that

will be blocked. As you highlight a rating, a definition for

the rating appears at the bottom of the screen.

• The Locks/Active screen (below) appears if the PIN

code is already stored. Use the Number buttons to

8� ^{When done selecting the ratings you want to block,}

enter your four-digit code and press

highlight Done and press

If the wrong PIN code is entered, the message “Incorrect PIN

Note: Above selection of blocking level is for U.S V-Chip system.

For Canada rating, you can highlight the “Canada RS” then press

, another “Canadian Rating Menu” screen will appear.

code, please try again!” appears. Highlight Retry and press

. Enter the code again and press

When the correct PIN code is entered, the Locks menu opens.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press

four times within five seconds. The PIN code will be cleared

and you can enter a new PIN code.

Changing your PIN code

1� Press

and highlight the Locks menu icon.

ꢀ� ^Pressq to display the PIN code entering screen.

ꢁ� ^{Enter your four-digit PIN code and press}

ꢄ� ^Pressq to highlight New PIN Code and press

ꢃ� ^{Press the Number buttons to enter a new four-digit code.}

Reenter the PIN code to confirm it.

ꢂ� ^Press. The new PIN code is now active.

ꢄꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Downloading an additional rating system

Independent rating system for broadcasters

for blocking TV programs and movies

Ratings

Description and Content themes

Mature Audience Only (This program is specifically

designed to be viewed by adults and therefore

may be unsuitable for children under 17.)

L) Crude or indecent language S) Explicit sexual

activity V) Graphic violence

In the future, an additional rating system may become

available for use in selectively blocking programs.

TV-MA

Note: The currently tuned station must be receiving a digital

signal before an additional rating system can be downloaded.

Parents Strongly Cautioned (This program contains

some material that many parents would find

unsuitable for children under 14 years of age.)

D) Intensely suggestive dialog L) Strong, coarse

language S) Intense sexual situations V) Intense

violence

To download the additional rating system

(if available):

TV-1ꢄ

1� Press

and highlight the Locks menu icon.

Parental Guidance Suggested (This program

contains material parents may find unsuitable for

younger children.)

D) Some suggestive dialog L) Infrequent coarse

language S) Some sexual situations V) Moderate

violence

ꢀ� ^Pressq to display the PIN code entering screen.

ꢁ� ^{Enter your four-digit PIN code and press}

TV-PG

TV-G

ꢄ� ^Pressq to highlight Enable Rating Blocking.

ꢃ� ^Pressu and q to select On, and press

ꢂ� ^Pressq to highlight Edit Rating Limits and press . The

General Audience (Most parents would find this

program suitable for all ages.)

Edit Rating Limits screen appears.

ꢅ� ^{Highlight Alt RS}^{and press}. The Edit Alternate Ratings

Directed to Older Children (This program is designed

for children age 7 and above. Note: Programs in

which fantasy violence may be more intense or more

combative than other programs in this category are

designated TV-Y7FV.)

screen will appear.

TV-Yꢅ,

TV-YꢅFV

Note:

• The Alt RS button will only be available if an additional

All Children (This program is designed to be

appropriate for all children.)

rating system is currently available.

TV-Y

• It may take several minutes for the TV to download the

additional rating system.

Independent rating system for movies

• The information displayed in the Alternate Ratings

screen will depend on the configuration of the

additional rating system available at the time of

download.

Ratings

Description and Content themes

X-rated (For adults only)

Not intended for anyone 17 and under

NC-1ꢅ

8� Press pqt u and then press

to select the level of

blocking you prefer. A box with an “ ” is a rating that

will be blocked.

Restricted (Under 17 requires accompanying

parent or adult)

Parents Strongly Cautioned (Some material may be

inappropriate for children under 13)

9� ^{When you are finished selecting the ratings you want to}

PG-1ꢁ

block, highlight Done and press

Parental Guidance Suggested (Some material may

not be suitable for children)

10�^{In the Edit Rating Limits}^{screen, highlight Done and press}

General Audience (Appropriate for all ages)

Note:

• The additional rating system can only be downloaded one

time. You will not be able to download any updates to the

rating system should such updates become available.

• If you place an “ ” in the box next to “ ‘None’ Rated,”

programs rated “None” will be blocked; however, programs

that do not provide any rating information will not be

blocked.

• The additional rating system is not designed, transmitted,

or controlled by the TV or Toshiba, nor is the availability of

an additional rating system determined or controlled by

Toshiba. Similarly, the rating of programs in an additional

rating system is not determined, transmitted, or controlled

by the TV or Toshiba.

• To display the rating of the program you are watching,

press

on the remote control. If it is rated “None,” the

word “NONE” appears in the RECALL screen (as shown

below right). If rating information is not provided, no rating

will appear in the RECALL screen.

• The additional rating system is an evolving technology;

therefore, availability, content, and format may vary.

ꢄꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Blocking channels

Unlocking programs temporarily

With the Channels Block feature, you can block specific

channels. You will not be able to tune blocked channels unless

you unlock them.

If you try to tune the TV to a program that exceeds the rating

limits you set, the TV will enter program lock mode and the

following message will appear on-screen:

To block channels:

This program exceeds the rating limit you set.

Push 'MUTE' to enter PIN.

1� Press

and highlight the Locks menu icon.

2� ^Press to display the PIN code entering screen.

You can either temporarily unlock the program or select an

unlocked program to watch.

3� ^{Enter your four-digit PIN code and press}

( page 45).

To temporarily unlock the program:

4� ^Press to highlight Channels Block and then press

. A list of the channels available for that input will be

displayed along with the call letters for each channel, if

available.

1� Press

2� ^{Enter your four-digit PIN code and press}. If the correct

code is entered, the program lock mode is released and

the normal picture appears. All locking is disabled until

the TV is turned off, and will be enabled when the TV is

turned on again.

Using the input lock feature

You can use the Input Lock feature to lock the video inputs

(VIDEO, ColorStream HD, HDMI 1, HDMI 2 and PC) and

channels 3 and 4.You will not be able to view the input sources

or channels until you unlock the inputs.

5� ^Press to highlight the channel you want to block

and press , which puts an “ ” in the box next to that

channel.

To lock/unlock the video inputs:

1� ^{From the Locks menu, Press} to display the PIN code

entering screen.

2� ^{Enter your four-digit PIN code and press}

3� ^Press to highlight Input Lock and press .

4� ^Press or  to select the level of video input locking

you prefer, as described below.

Mode

Description

Locks VIDEO,

ColorStream HD, HDMI 1,

HDMI 2, and PC.

6� ^{Repeat step 5 for other channels you want to block.}

Video

7� ^{Highlight Done and press}

Locks VIDEO, ColorStream HD,

HDMI 1, HDMI 2, PC and channels 3

and 4.

• Select Video+ if you play video

tapes via an ANT/CABLE input.

To unblock individual channels:

In step 5 above, press  to highlight the channel you want

Video+

Off

to unblock, press

to remove the “ ” from the box, highlight

Done and press

Unlocks all video inputs and channels

3 and 4.

To block all channels at once:

Highlight Block All in step 5 on previous page and then

highlight Done and press

5� ^Press

To unblock all locked channels at once:

Highlight Allow All in step 5 on previous page and then

highlight Done and press

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Using the GameTimer

Using the control panel lock feature

You can use the GameTimer to set a time limit for playing a

video game (30–120 minutes). When the GameTimer expires,

the TV enters Input Lock mode and locks out the input source

for the video game device.

You can lock the control panel to prevent your settings from

being changed accidentally (by children, for example). When

the control panel lock is On, none of the controls on the TV

control panel will operate except POWER.

To set the GameTimer :

To lock the control panel:

1� From the Locks menu, press q to display the PIN code

1� Press

and highlight the Locks menu icon.

entering screen.

ꢀ� ^Pressq to display the PIN code entering screen.

ꢀ� ^{Enter your four-digit PIN code and press}

ꢁ� ^{Enter your four-digit PIN code and press}

ꢄ� ^Pressq to highlight Control Panel Lock.

ꢃ� ^Pressu and p or q to highlight On and press . When

the control panel is locked and any button on the control

panel (except POWER) is pressed, the message “NOT

AVAILABLE” appears.

ꢁ� ^Pressq to highlight GameTimer and press u.

ꢄ� ^Pressp or q to select the length of time until the Input

Lock is activated (30, 60, 90, or 120 minutes) and press

To cancel the GameTimer :

Select Off in step 4 above.

To deactivate the Input Lock once the GameTimer

has activated it:

Set the Input Lock to Off ( “Using the input lock feature” as

described above).

To unlock the control panel:

Note:

Highlight Off in step 5 above, or press and hold the VOLUME

– button on the TV control panel for about 10 seconds until

the volume icon appears.

• A message will appear when 10 minutes, 3 minutes, and 1

minute remain on the GameTimer.

• If the TV loses power with time remaining on the GameTimer,

when power is restored the TV will enter Input Lock mode (as

if the GameTimer had been activated) and you will have to

deactivate the Input Lock (as described above).

ꢄ8

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Using the PC settings feature

Setting the PC Audio

You can view an image from a PC on the TV screen.

This function allows you to output or mute the sound from

your PC when connecting using the PC IN terminal and an

analog RGB cable. ( page 19)

When a PC is connected to the TV's PC IN terminal, you can

use the PC Settings feature to make adjustments to the image.

If the edges of the picture are cut off, readjust the Horizontal

Position and Vertical Position. If the picture is affected by

interference, readjust the Clock Phase and Sampling Clock.

To set the PC Audio:

1� Press

and open the Audio menu.

ꢀ� ^{Highlight Audio Setup}^{and press}

To adjust the PC settings:

ꢁ� ^Pressp or q to select PC Audio and then press t or u to

1� Repeatedly press

( “Selecting the video input source to view” page 34).

and open the Setup menu.

to select PC input mode

select No or Yes.

Yes: When viewing the PC input, the audio from the PC

Audio input can be heard.

No: When viewing the PC input, there will be no audio.

ꢀ� ^Press

ꢁ� ^{Highlight PC Settings}^{and press}

Note: Because the PC and HDMI-1 inputs share the

same set of analog audio inputs, the PC Audio menu

setting influences the HDMI 1 Audio menu setting. If PC

Audio is set to “No,” the HDMI 1 Audio setting changes

to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio

setting is set to “Digital” and is grayed out in the menu.

(Also see item 3 on page 11 and “Setting the HDMI™

Audio mode” on page 32.)

Setup

Installation

Sleep Timer

PC Settings

Note: If a PC is not connected or there is no pc input

signal, this feature will be grayed out in the Setup menu.

ꢄ� ^Pressp or q to highlight the item you want to adjust.

Setting the sleep timer

ꢃ� ^Presst or u to make the appropriate adjustments.

You can set the sleep timer to turn off the TV after a set

length of time (maximum of 180 minutes).

To set the sleep timer using the remote control:

Press

on the remote control to set the length of time

to increase the

until the TV turns off. Repeatedly press

time in 10-minute increments, or press p or q to increase or

decrease the time in 10-minute increments, to a maximum of

180 minutes.

Note: The screen is disrupted momentarily when adjusting

the PC settings. This is not a sign of malfunction.

Mode

Description

To set the sleep timer using the on-screen menus:

Horizontal

Position

Moves the picture left/right.

The adjustment range is within ±50 from center.*

1� ^Press

ꢀ� ^{Highlight Sleep Timer}^{and press}

ꢁ� ^{Press the Number buttons to enter the length of time in}

and open the Setup menu.

Vertical

Position

Moves the picture up/down.

The adjustment range is within ±10 from center.*

10-minute increments.

Helps to reduce noise and sharpen the picture.

The adjustment range is within ±16 from center.*

Clock Phase

ꢄ� ^Highlight^Done^{and press}

Helps to reduce noise and minimize periodic

vertical stripes on the screen.

The adjustment range is within ±10 from center.*

Note: When a power failure occurs, the sleep timer

setting may be cleared.

Sampling

Clock

To display the remaining sleep time:

Highlight this item then press

to get an

Auto Adjust

Press

optimum adjustment automatically.

Note: A message will display on-screen when there is one

minute remaining on the sleep timer.

* The default settings may vary depending on the input signal

format.

To cancel the sleep timer:

Repeatedly press

until it is set to 0 minute.

ꢄ9

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 6: Using the TV’s features

Displaying TV status information

Understanding the auto power off

feature

To display TV status information using RECALL:

The TV will automatically turn itself off after approximately

15 minutes if it is tuned to a vacant channel or a station that

completes its broadcast for the day. This feature functions in

ANT/CABLE mode only.

Press

on the remote control.

The following information will display (if applicable):

• Current input (ANT/CABLE, VIDEO, etc.)

• If ANT/CABLE is the current input, either “CABLE” (for

cable TV) or “ANT” (for over-the-air broadcasts).

• Channel number (if in ANT/CABLE mode)

• Channel label (if set)

Understanding the last mode

memory feature

• Digital signal strength indicator (bar graph in lower right

corner of box; for ATSC signal only)

• Stereo, Mono or SAP audio status (when HDMI input

mode, Dolby Digital or PCM)

• Video resolution

• Aspect ratio of incoming video signal (4:3 or 16:9)

• V-Chip rating status

• Game Timer (if set)

If the power is cut off while you are viewing the TV, the

Last Mode Memory feature automatically turns on the

TV when the power is resupplied.

Note: If it’s possible, and you will be away from the TV for an

extended period of time you should unplug the power cord.

To close the RECALL screen:

Press

again.

To display TV status information using INFO:

Press

on the remote control.

The following additional information will display for off air

digital channels (if applicable):

• Title

• Duration

• Detailed description

Note: The location of the banner can be moved to the top or

bottom of the screen by pressing p or q while the RECALL

or INFO display is on-screen.

ꢃ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 7: Using the TV’s advanced features

Selecting the color temperature

You can change the quality of the picture by selecting from

three preset color temperatures (Cool, Medium, and Warm),

as described below.

Using the advanced picture

settings features

Using dynamic contrast

When dynamic contrast is set to On, the TV will detect

changes in the picture quality that affect the appearance of

your contrast settings and then automatically adjust the video.

Mode

Picture Quality

blueish

Cool

Medium

Warm

neutral

reddish

To select dynamic contrast preferences:

To select the color temperature:

1� Press

and open the Video menu.

ꢀ� ^{Highlight Picture Settings}^{and press}

1� ^Press

ꢀ� ^{Highlight Picture Settings}^{and press}

ꢁ� ^{Highlight Advanced Picture Settings}^{and press}

and open the Video menu.

ꢄ� ^{Highlight Color Temperature}^{and press}

ꢃ� ^{In the Color Temperature}^{field, press}t or u to select the

mode you prefer (Cool, Medium, or Warm).

ꢂ� ^Pressp or q to select either B Drive or G Drive, and then

ꢁ� ^{Highlight Advanced Picture Settings and press}

press t or u to adjust the settings.

ꢄ� ^{In the Dynamic Contrast}^{field, select either Off or On.}

• B Drive: u makes the picture blueish.

• G Drive: u makes the picture greenish.

ꢃ� ^{To save the new settings, highlight Done}^{and press}

To revert to the factory defaults, highlight Reset and

Note: The B Drive and G Drive settings are connected to

the Color Temperature settings and will change based

on which setting is selected in step 5 above.

press

Note: If you select one of the factory-set picture modes

(Sports, Standard, Movie, or PC) and then change the

dynamic contrast setting, the picture mode automatically

changes to Preference.

ꢅ� ^{To save the new settings, highlight Done and press}

To revert to the factory defaults, highlight Reset and

press

Using the static gamma feature

The static gamma feature allows you to adjust the levels of

Note: If you select one of the factory-set picture modes

(Sports, Standard, Movie, or PC) and then change the

color temperature mode, the picture mode automatically

changes to Preference.

black in the picture.

To adjust the static gamma settings:

1� ^Press

and open the Video menu.

ꢀ� ^{Highlight Picture Settings}^{and press}

ꢁ� ^{Highlight Advanced Picture Settings}^{and press}

ꢄ� ^{In the Static Gamma}^{field, press}t or u to adjust the

static gamma.

The adjustment range is within ±5 from center.

• If the setting is moved in the minus direction, the detail

of black colors will be decreased.

• If the setting is moved in the plus direction, the detail of

black colors will be increased.

ꢃ� ^{To save the new settings, highlight}^Done^{and press}

To revert the factory defaults, highlight Reset and press

Note: If you select one of the factory-set picture modes

(Sports, Standard, Movie or PC) and then change the

static gamma setting, the picture mode automatically

changes to Preference.

ꢃ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 7: Using the TV’s advanced features

Using CableClear^®digital noise reduction

Using the Game Mode feature

The CableClear^®digital noise reduction feature allows you

to reduce visible interference in your TV picture. This may

be useful when receiving a broadcast with a weak signal

(especially a Cable channel) or playing a noisy video cassette

or disc.

You can use the Game Mode feature for shorter frame delays

when playing a video game requiring split-second timing

between the on-screen display and input from the controller

(such as music creation and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input

must be Video, ColorStream HD, HDMI 1, or HDMI 2. The

Game Mode cannot be turned on when any other video input

is selected.

To change the CableClear settings:

1� Press

and open the Video menu, highlight Noise

Reduction and press

ꢀ� ^{In the CableClear}^{field, select your desired setting.}

To turn on Game Mode:

Note:

1� Press

and open the Video menu.

ꢀ� ^Pressp or q to highlight the Game Mode and then

• If the current input is ANT/CABLE, VIDEO, the menu

will display the text “CableClear.” The available

selections are Off, Low, Middle, and High.

press u.

ꢁ� ^Pressp or q to select On and then press

• If the current input is ColorStream HD, HDMI 1, or

HDMI 2, the menu will display the text “DNR.” The

available selections are Off, Low, Middle, and High.

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the

TV off and then on again.

Low, Middle, and High will reduce the noise in varying

degrees, from lowest to highest, respectively.

ꢁ� To save the new settings, highlight Done and press

Note: You can change the video input by pressing

remote control ( page 34).

on the

To revert to the factory defaults, highlight Reset and

press

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce

visible interference caused by MPEG compression. Choices

for MPEG noise reduction are Off, Low, Middle, and High. Off

is automatically selected when this feature is disabled (“grayed

out”).

To select the MPEG noise reduction level:

1� ^Press

and open the Video menu.

ꢀ� ^{Highlight Noise Reduction}^{and press}

ꢁ� ^Pressp or q to highlight the MPEG Noise Reduction

field, and then press t or u to select either Off, Low,

Middle or High.

ꢄ� ^{To save the new settings, highlight Done}^{and press}

To revert to the factory defaults, highlight Reset and

press

ꢃꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 8: Troubleshooting

Cannot view external signals or channel 3 or 4

General troubleshooting

• If you cannot view signals from external devices

connected to VIDEO, ColorStream^®HDMI, PC, or from

channels 3 or 4, make sure the Input Lock is set to Off (

page 47).

Before calling a service technician, please check this chapter

for a possible cause of the problem and some solutions you

can try.

Poor color or no color

• The station may have broadcast difficulties. Try another

channel.

• Adjust the Tint and/or Color ( page 41).

Black box on-screen

• The closed caption feature is set to one of the Text modes

(T1, T2, T3, or T4). Set the closed caption feature to Off (

page 42).

Poor composite or S-video picture

• If the TV is connected to an external A/V device (e.g.,

DVD player, video game system, set-top box, etc.) try

using a ColorStream or HDMI video connection instead.

TV stops responding to controls

• If the TV stops responding to the controls on the remote

control or TV control panel and you cannot turn off the

TV, please unplug the power cords few seconds then re-

plug to try again.

Picture and sound are out of sync

• As with all products that contain a digital display, in rare

instances, when viewing certain content (e.g.. television

broadcasts, video games, DVDs), you may notice that

the sound and picture are slightly out of sync. This

phenomenon can be caused by various factors including,

without limitation, video processing within the TV,

video processing in an attached gaming system, and

video processing or different compression rates used by

broadcasters in their programming. You may want to try

one or more of the following suggestions, which may

help to reduce the effect of this phenomenon: