E: ENGLISH
F: FRANÇAIS
S: ESPAÑOL
E
F
S
OWNER'S MANUAL
LCD Color Television
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
15DL15
20DL15
Model number:
Serial number:
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
Child Safety
It Makes A Difference
Where Your TV Stands
4) Follow all instructions.
5) Do not use this apparatus near water.
Congratulations on your purchase! As you enjoy
6) Clean only with dry cloth.
your new TV, keep these safety tips in mind:
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
The Issue
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
ꢀ If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
ꢀ The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
ꢀ Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
Wide plug
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
Toshiba Cares!
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
ꢀThe consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
ꢀThe Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Tune Into Safety
13) Unplug this apparatus during
lightning storms or when
unused for long periods of
time.
ꢀ One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
ꢀ Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
ꢀ Carefully read and understand the other enclosed
instructions for proper use of this product.
ꢀ Do not allow children to climb on or play with furniture
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
and TVs.
ꢀ Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
ꢀ Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
ꢀ Share our safety message about this hidden hazard of the
15) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
16) CAUTION: To reduce the risk of electric shock, do not use
the polarized plug with an extension cord, receptacle, or
other outlet unless the blades can be inserted completely
to prevent blade exposure.
home with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
CEA is the Sponsor, Producer and
Manager of the International CES®
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation, Care, and Service
26) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
Antenna lead-in wire
17) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
Antenna discharge unit
(NEC Section 810-20)
Ground clamp
Grounding conductors
(NEC Section 810-21)
18)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
Electric service equipment
Power service grounding
electrode system (NEC Art 250 Part H)
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
Ground clamps
27)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never
locate the antenna near overhead
19) Never place or store the TV in direct sunlight; hot, humid
areas; or areas subject to excessive dust or vibration.
20) Always place the TV
on the floor or a sturdy,
level, stable surface
that can support the
weight of the unit. To
secure the TV, use a
sturdy tie from
Sturdy tie (as short as possible)
Hooks
Clip
power lines or other electrical
circuits.
• Never attempt to install any of the
following during lightning activity:
Screw
Clip
TV top
TV side
the hooks on the rear
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
of the TV pedestal to a wall, pillar, or other immovable
structure. Make sure the tie is tight, secure, and parallel to
the floor. Leave a space of at least 4 inches around the TV.
21) Never expose the apparatus to dripping or splashing liquid
or place items such as vases, aquariums, any other item
filled with liquid, or candles on top of the TV.
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
22) Never block or cover the slots
or openings in the TV cabinet
back, bottom, and sides.
28) If you use the TV in a room whose temperature is 32 ºF (0 ºC)
or below, the picture brightness may vary until the LCD
warms up. This is not a sign of malfunction.
Never place the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
29) Always unplug the TV before
cleaning. Wipe the display
panel surface gently using only
a soft cloth (cotton, flannel,
etc.). A hard cloth may
The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation
of the TV.
damage the surface of the
panel. Avoid contact with
alcohol, thinner, benzene, acidic or alkaline solvent
cleaners, abrasive cleaners, or chemical cloths, which may
damage the surface. Do not spray volatile compounds
such as insecticide on the cabinet. This may cause a
discoloration or damage the cabinet.
23) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
24) Never overload wall outlets and extension cords.
30)
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
25) Always operate the TV with
100-240 V AC
a 100-240 V AC, 60Hz power source
only.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
31) While it is thundering, do not touch the connecting cables
or apparatus. Failure to follow this instruction may result in
electric shock.
Important notes about your LCD TV
The following symptoms are technical limitations of
LCD Display technology and are not an indication of
malfunction. Therefore, TACP/TCL is not responsible
for perceived defects resulting from these symptoms.
32) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
1) An afterimage (ghost) may appear on the screen if a fixed,
non-moving image is displayed for a long period of time.
The afterimage is not permanent and will disappear in a
short period of time.
33) During normal use, the TV may make occasional snapping
or popping sounds. This is normal, especially when the
unit is being turned on or off. If these sounds become
frequent or continuous, unplug the power cord and
contact a Toshiba Authorized Service Center.
2) The LCD panel contained in this TV is manufactured using
an extremely high level of precision technology; however,
there may be an occasional pixel (dot of light) that does
not operate properly (that does not light, that remains
constantly lit, etc.). This is a structural property of LCD
technology, is not a sign of malfunction, and is not
covered under your warranty. Such pixels are not visible
when the picture is viewed from a normal viewing
distance.
34)
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE !
Never strike the screen with a sharp or heavy object.
35) • The LCD screen of this product can be damaged by
Ultraviolet Radiation from the sun. When selecting a
location for the television, avoid locations where the
screen may be exposed to direct sunlight, such as in
front of a window.
Note: Interactive video games that involve shooting a
“gun” type of joystick at an on-screen target may not work
on this TV.
• Never touch, press, or place anything on the LCD screen.
These actions will damage the LCD screen. If you need
to clean the LCD screen, follow the instructions in item
29 on page 4.
Service
36)
WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening
and removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
a Toshiba Authorized Service Center.
37) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask the service technician to
perform routine safety checks to determine that the TV is
in safe operating condition.
38) The cold cathode fluorescent lamp in the LCD panel
contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose of
the used TV by the approved method for your area, or ask
a qualified service technician to properly dispose of the
TV.
Note: The lamp unit contains mercury, the
disposal of which may be regulated due to
environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction................................................................ 7
Using the TV’s features.......................................... 20
Welcome to Toshiba......................................................... 7
Supplied accessories ......................................................... 7
Connecting the power cord .............................................. 7
Exploring your new TV ................................................... 8
Switching between two channels using Channel
Return ........................................................................... 20
Using the Blue screen feature ......................................... 20
Selecting the video input source ..................................... 20
Using the V-Chip menu ................................................. 21
Rear terminal cover ................................................... 9
Cable clamper ........................................................... 9
Adjusting the TV viewing angle ................................ 9
V-Chip rating and categories................................... 21
V-Chip (Parental menu) setup ................................ 22
Adjusting the picture ..................................................... 23
Connecting your TV ................................................ 10
Selecting the picture mode ...................................... 23
Adjusting the picture quality ................................... 23
Using the closed caption feature ..................................... 24
Connecting an antenna or cable TV............................... 10
Connecting a VCR ........................................................ 11
Connecting a cable converter box .................................. 11
To turn on or off the Closed Caption feature .......... 25
Using the Panel lock feature ........................................... 25
Setting the sleep timer.................................................... 25
Connecting a cable converter box and a VCR ................ 11
Connecting a DVD player with ColorStream®
(component video) and a VCR ...................................... 12
Adjusting the sound ....................................................... 26
Connecting a DTV receiver/set-top box with
Muting the sound ................................................... 26
Selecting stereo/SAP broadcasts .............................. 26
Using the WOW™ surround sound feature ........... 27
Selecting the sound mode ....................................... 27
Adjusting the sound quality .................................... 28
Using the StableSound® feature .............................. 28
Using the PC setting feature .......................................... 29
ColorStream® (component video) and a VCR ................ 13
Connecting an audio system .......................................... 14
Connecting a camcorder ................................................ 14
Connecting a personal computer (PC) ........................... 15
Using the remote control ...................................... 16
Learning about the remote control ................................. 16
Installing the remote control batteries ............................ 16
Remote control effective range ....................................... 16
Using the Auto off feature .............................................. 30
Displaying on-screen information .................................. 30
Understanding the last mode memory feature ................ 30
Setting up your TV .................................................. 17
Appendix................................................................... 31
Learning about the menu system ................................... 17
Changing the on-screen display language ....................... 18
Adding channels to the TV’s memory ............................ 18
Specifications ................................................................. 31
Troubleshooting ............................................................. 32
Limited United States Warranty ..................................... 33
Limited Canada Warranty.............................................. 34
Programming channels automatically...................... 18
Adding and erasing channels manually.................... 19
Changing channels ........................................................ 19
Index .......................................................................... 35
Programming your favorite channels .............................. 19
6
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Introduction
Welcome to Toshiba
Thank you for purchasing this Toshiba LCD TV. The goal of this
manual is to guide you through setting up and operating your Toshiba
TV as quickly as possible.
The model and serial numbers are on the back of your TV. Write
these numbers in the space provided on the front cover of this manual
for your records.
Instructions in this manual are based on using the remote control.
You also can use the controls on the TV if they have the same name as
those referred to on the remote control.
Please read all the safety and operating instructions carefully, and keep
this manual for future reference.
Supplied accessories
Check that you have the accessories and items shown.
Owner’s Manual
(This book)
Remote control
Batteries R6 (AA) × 2
Power cord
Clip
Use this clip to attach the
TV to a wall, pillar, or
other immovable structure.
See item 20 on page 4.
Connecting the power cord
NOTE: RISK OF
EQUIPMENT DAMAGE!
Never plug in any power cords
Back of TV
until you have finished connecting all
equipment (see page 10).
Wall outlet
100-240 V AC 60Hz
Power cord (supplied)
* The power cord supplied with this product is to be used in the United States and Canada only.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploring your new TV
You can operate your TV by using the buttons on the top panel or the
remote control. The A/V terminals for connecting other equipment to
your TV are on the back panel and side panel (see illustrations below).
Also see “Connecting your TV” on pages 10-15.
Model 20DL15 is used in this manual for illustration purposes.
Top panel
Volume - +
Channel z y
POWER
TV/VIDEO
Remote control
MUTE
POWER
TV/VIDEO
MTS
RECALL
TV front
Left side terminals
4
7
0
2
5
3
6
8
9
CH RTN
VIDEO-2
IN
CH
VOL
VOL
ENTER
CH
EXIT
MENU
PICTURE
FAV. CH
CC
Remote sensor
Power indicator
SOUND
SLEEP
Headphone jack
Back
Terminal cover removed.
(see page 9)
Power cord
Cable clamper
AUDIO OUT
PC AUDIO IN
ANT IN
RGB/PC IN
VIDEO-1 IN
(ColorStream)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Rear terminal cover
The connection panel is hidden behind the terminal cover.
1. Remove the cover. Release the two hooks on the bottom of
the cover.
2. Install cables as necessary.
3. Reinstall the cover. Align the holes on the TV back with the
three tabs on the rear terminal cover as shown.
4. Close the cover.
Cable clamper
The cable clamper can be used to bundle the connection cables
(see page 10).
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE!
Never grasp the cable clamper when
moving or lifting the TV. The cable clamper
could break, causing the TV to fall.
Cable clamper
Adjusting the TV viewing angle
You can adjust the angle of the TV screen.
Swivel angle
Tilt angle
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
Note: All required cables, if not provided with your other devices, can be
purchased at many electronics accessory suppliers.
●
Coaxial (F-type) cable is used for connecting your antenna, cable TV
service, and/or cable converter box to the ANT 75 Ω RF input on your
TV.
Coaxial (antenna) cable
●
Standard A/V cables (composite video) usually come in sets of three,
and are for use with video devices with standard audio and standard
(composite) video output. These cables (and the related inputs on your
TV) are typically color-coded according to use: yellow for video, red
for stereo right audio, and white for stereo left (or mono) audio.
Standard A/V cables (red/white/yellow)
S-video cable
●
S-video cable is for use with video devices with S-video output.
Separate audio cables are required for a complete connection.
Note: An S-video cable provides better picture performance than a
standard (composite) video cable.
●
Component video cables come in sets of three and are for use with
Component video cables
video devices with component video output. These cables are typically
color-coded red, green, and blue. (ColorStream® is Toshiba’s brand of
component video.) Separate audio cables are required for a complete
connection.
Note: Component video cables provide better picture performance than a
standard (composite) video or S-video cable.
Mini D-sub 15-pin cable is for use with a personal computer with an
analog RGB (15-pin) output. A separate audio cable is required for a
complete connection.
Mini D-sub 15-pin cable
Audio cable
●
NOTE: RISK OF
EQUIPMENT DAMAGE!
Never plug in any power cords
until you have finished connecting all
equipment.
Connecting an antenna or cable TV
This connection allows you to watch TV programs or basic cable
channels.
From Antenna or Cable
Back of TV
10
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video jacks) instead of
a standard video cable.
Stereo VCR
VIDEO
AUDIO
L
R
From Cable
Box or
Antenna
The TV side panel can be used to connect a
VCR with S-video.
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Back of TV
Connecting a cable converter box
Note:
This connection allows you to watch basic and premium cable channels
.
When you use a converter box with your TV,
the remote control will not operate some
features, such as favorite channel
programming or channel return.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
Back of TV
From Cable
IN
OUT
Cable box
Connecting a cable converter box and a VCR
Note:
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video1 (page 20). Tune the VCR to channel 3 or 4 (the same
channel as the converter box output switch), and use the cable
converter box to change channels.
When you use a converter box with your TV,
the remote control will not operate some
features, such as favorite channel
programming or channel return.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video jacks) instead of
a standard video cable.
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
The TV side panel can be used to connect a
VCR with S-video.
CH 3
CH 4
OUT
From Cable
IN OUT
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Cable box
Back of TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player with ColorStream®
(component video) and a VCR
Note:
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DVD player with component video can greatly enhance
picture quality and realism.
For the highest possible picture quality, use
component video cables between the TV and
DVD player.
The ColorStream jacks can be used with 480i,
480p, 720p, and 1080i scan system.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
The TV side panel can be used to connect a
VCR with S-video.
– To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select Video1 on the TV (see “Selecting
the video input source” on page 20).
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
From
Antenna
Stereo VCR
IN from ANT OUT to TV
VIDEO
AUDIO
L
R
IN
CH 3
CH 4
TV side pannel
OUT
Back of TV
AUDIO
OUT
L
L
Y
PB
PR
R
R
VIDEO
OUT
COMPONENT VIDEO
DVD player with component video
12
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR
Note:
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV (composite video only) and TV
programs.
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
For the highest possible picture quality, use
component video cables between the TV and
DTV receiver/set-top box.
The TV side panel can be used to connect a
VCR with S-video.
– To record and watch a DTV program, select LINE IN on the
VCR, and select Video1 on the TV (see “Selecting the video input
source” on page 20).
– To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select Video1 on the TV.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
– To record and watch the same TV program, tune the VCR to the
channel to record, and select Video2 on the TV.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
From Antenna
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT TV
CH 3
CH 4
OUT
TV side pannel
Back of TV
From
DTV Antenna
AUDIO
OUT
L
L
Y
PB
PR
Satelite IN
R
R
VIDEO
OUT
S-VIDEO
COMPONENT VIDEO
DTV Receiver with component video
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an audio system
Note:
This connection allows you to hear the TV sound through external
speakers connected to an audio amplifier. The audio signal level
(fixed) is not affected by pressing the volume buttons on the TV or
the TV’s remote control. To control the audio through the amplifier,
use the audio system’s remote control.
Set the TV’s volume to the minimum level if
necessary.
Amplifier
LINE IN
L
R
Back of TV
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance.
VIDEO DIO
OUT
L
R
Camcorder
VIDEO 2 (side panel)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Connecting a personal computer (PC)
This connection allows you to view the image of a personal computer
(PC) on the TV screen. When connecting a PC to the TV, use an
analog RGB (15-pin) computer cable and a PC audio cable.
Note:
• Some PC models cannot be connected to
this TV.
• An adapter is not needed for computers
with a DOS/V compatible mini D-sub
15-pin terminal.
– To use a PC, set the monitor output resolution on the PC before
connecting it to the TV. The following signals can be displayed.
• VGA: VESA 640 × 480 @ 60Hz (20DL15)
• XGA: VESA 1024 × 768 @ 60Hz (15DL15)
Other formats or non-standard signals may not be displayed
correctly.
• Depending on the DVD’s title and the
specitications of the PC on which you are
playing the DVD-Video, some scenes may
be skipped or you may not be able to
pause during multi-angle scenes.
– To display the optimum picture, use the PC setting feature. (see
“Using the PC setting feature” on page 29).
Back of TV
Computer
Audio
output
Audio cable
RGB/PC
output
Conversion
adapter
(if necessary)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
MUTE
POWER
Learning about the remote control
TV/VIDEO
MTS
RECALL
POWER turns the TV on and off (standby mode*)
MUTE turns off the sound (page 26)
RECALL displays TV settings on-screen (page 30)
MTS selects stereo or SAP sound (page 26)
4
0
2
5
3
6
TV/VIDEO selects the video input source (page 20)
Channel Numbers (0-9, 100) allow direct access to channels (page 19)
CH RTN switches between the last two viewed channels (page 20)
ENTER saves your menu settings (page 17)
8
9
CH RTN
CH
yz x • select or adjust menu items (page 17)
CH yz cycles through programmed channels (page 18)
VOL - + adjusts the volume level
VOL
VOL
ENTER
CH
CC selects the Caption or Text mode (page 25)
MENU opens the menu system (page 17)
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
EXIT exits the menu system (page 17)
SLEEP accesses to the automatic TV shut-off function (page 25)
PICTURE selects the picture mode (page 23)
SOUND selects the sound mode (page 27)
FAV. CH cycles through favorite channels (page 19)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
Caution:
Never throw batteries into a fire.
2. Install two batteries (R6 size “AA”). Match the + and – signs on
the batteries to the signs on the battery compartment.
Note:
• Be sure to use AA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
3. Replace the battery cover on the remote control until the lock
snaps.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
Remote control effective range
• When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
* The TV is in standby mode when the power is OFF but the power cord is still plugged into an outlet.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Setting up your TV
Learning about the menu system
After you have installed the batteries, you will need to set some
preferences on the TV by using the menu system. You can access the
menu system using the buttons on the TV or remote control.
1. Press MENU to display the menu system.
2. Press x or • to select a menu.
3. Press ENTER, and then press y or z to select an item.
4. Press ENTER, and then press y or z to select or adjust a setting.
5. Press ENTER to save your menu settings.
To return to the previous menu, press EXIT.
To close the menu system, press MENU.
MUTE
POWER
Picture
Picture mode
Contrast
Brightness
Color
TV/VIDEO
MTS
RECALL
Sharpness
Sound
4
7
0
2
5
3
6
Tint
Sound mode
Bass
E
Treble
Balance
StableSound
8
9
CH RTN
Channel
E
Auto program
Manual program
Favorite channel
Blue screen
ENTER
CH
VOL
VOL
ENTER
CH
yzx •
ENTER MENU
EXIT
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
MENU
Special
Language
Caption/Text
Captions
Panel lock
V-Chip
PC
Auto off
H-Position
V-Position
E
Clock
Phase
Note:
Auto configure
Reset
The PC mode is selectable only when the TV
is in PC input mode and active picture is on-
screen (see “Selecting the video input source”
on page 20).
ENTER MENU
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the on-screen display language
You can choose from three different languages (English, Spanish and
French) for the on-screen display of adjustment menus and messages.
4
7
0
2
5
3
6
To select a language:
8
9
1. Press MENU, and then press x or • until the Special menu
CH RTN
appears.
2. Press ENTER, and then press y or z to highlight Language.
ENTER
CH
3. Press ENTER, and then press y or z to select your desired
VOL
VOL
ENTER
CH
language.
yzx •
EXIT
MENU
PICTURE
FAV. CH
CC
Special
Language
SOUND
SLEEP
Caption/Text
English
Captions
Español
MENU
Panel lock
Français
V-Chip
Auto off
EXIT MENU
Adding channels to the TV’s memory
Note:
• To tune the TV to a channel not
programmed in the channel memory, you
must use the Channel Number buttons on
the remote control.
When you press CH y or CH z, your TV will stop only on the
channels you program into the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
• If you press the ENTER button during auto-
programming, the function will stop and
only the channels programmed up to that
time will be stored in the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are
programmed automatically, you can manually add or erase individual
channels (see page 19).
To program channels automatically:
MUTE
POWER
1. Press MENU, and then press x or • until the Channel menu
appears.
TV/VIDEO
MTS
RECALL
2. Press ENTER, and then press y or z to highlight Auto
program.
4
7
0
2
5
3
6
Channel
Auto program
8
9
CH RTN
Manual program
Favorite channel
Blue screen
To start
ENTER
CH
VOL
VOL
ENTER
CH
yzx •
ENTER EXIT MENU
CH yz
3. Press ENTER to start auto-programming. The TV will
automatically cycle through all the TV and Cable channels, and
store all active channels in the channel memory.
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
MENU
Channel
Auto program
Manual program
Favorite channel
Blue screen
2
%
TV
4
ENTER
4. Press CH y or CH z to view the programmed channels.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Adding and erasing channels manually
TV top panel
After you have automatically programmed the active channels into
the TV’s channel memory, you can manually add or erase specific
channels.
TV/VIDEO
VOLUME
CHANNEL
POWER
To add or erase channels:
1. Press MENU, and then press x or • until the Channel menu
appears.
Channel zy
2. Press ENTER, and then press y or z to highlight Manual
program.
3. Press ENTER, and then press x or • to select a channel you
want to add or erase.
MUTE
POWER
Channel
Auto program
TV/VIDEO
MTS
RECALL
Manual program
Favorite channel
TV
4
Blue screen
Erase
4
7
0
2
5
3
6
EXIT MENU
Channel
Number
8
9
4. Press z, and then press x or • to select Memory (add) or Erase.
The current channel is added to Memory or erased from the
channel list.
CH RTN
ENTER
CH
VOL
VOL
Changing channels
To change to a specific channel (programmed or unprogrammed):
ENTER
CH
yzx •
CHyz
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
MENU
To change to the next programmed channel:
FAV. CH
Press CH y or CH z on the TV or remote control.
Programming your favorite channels
You can preset up to 8 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
To program your favorite channels:
1. Press MENU, and then press x or • until the Channel menu
appears.
2. Press ENTER, and then press y or z to highlight Favorite
channel.
3. Press ENTER to display the Favorite Ch. menu.
Favorite Ch.
TV
4
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Channel
Auto program
Manual program
Favorite channel
Blue screen
To set
MENU EXIT
ENTER EXIT MENU
4. Press y or z to select the first favorite channel position.
5. Press x or • to set the desired channel number for the first
favorite channel position.
6. Repeat steps 4 and 5 to program other channels.
To select your favorite channels:
Repeatedly press FAV. CH on the remote control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
MUTE
POWER
To switch between two channels:
TV/VIDEO
TV/VIDEO
MTS
RECALL
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons
(0–9, 100).
4
7
0
2
5
3
6
3. Press CH RTN. The previous channel will be displayed.
Channel
Number
Each time you press CH RTN, the TV will switch back and forth
between the last two channels that were selected.
8
9
CH RTN
CH RTN
ENTER
CH
VOL
VOL
ENTER
CH
Using the Blue screen feature
yzx •
With the Blue screen function On, the screen will automatically turn
blue and the sound will be muted when no signal is received.
EXIT
MENU
PICTURE
FAV. CH
CC
To turn on the Blue screen feature:
SOUND
SLEEP
1. Press MENU, and then press x or • until the Channel menu
MENU
appears.
2. Press ENTER, and then press y or z to highlight Blue screen.
3. Press ENTER, and then press y or z to select On.
Note: If the Blue screen appears repeatedly because of poor signal
strength, select Off in step 3.
Channel
Auto program
Manual program
Favorite channel
On
Blue screen
Off
EXIT MENU
Selecting the video input source
Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select Video1
(including ColorStream), Video2, or PC depending on which input
jacks are used for connecting the devices (see “Connecting your TV” on
page 10).
TV top panel
TV/VIDEO
VOLUME
CHANNEL
POWER
TV/VIDEO
Video1
Video2
PC
(
)
TV channel
20
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Using the V-Chip menu
Note:
Some TV programs and movies include signals that classify the
content of the program (violence, sex, dialog, language). The V-Chip
control feature in this TV detects the signals and blocks the programs
according to your selections. To use this feature, perform the
following setup.
The V-Chip function is available for the U.S.
V-Chip system only. The Canadian V-Chip
system is not supported.
1. Enable the Lock.
2. Set a four-digit password.
3. Select the ratings and categories you want to block.
V-Chip rating and categories
Rating guidelines are provided by broadcast stations. Most television
programs and television movies can be blocked by TV rating and/or
category. Movies that have been shown at the theaters and direct-to-
video movies use the MPAA movie rating system instead.
For Movies previously shown in theaters :
Movie Ratings :
• Unblocked
• G & above
• PG & above
• PG-13 & above
• R & above
• NC-17 & above
• X
(general audience)
(parental guidance suggested)
(13 years and older)
(restricted)
(18 years and older)
(adult)
If you select “PG-13 & above,” all G and PG rated movies will be
available, and all PG-13, R, NC-17 and X rated movies will be
blocked.
For Television programs including made-for-TV movies:
General TV Ratings:
• Unblocked
• TV-G & above
(general audience)
(individual categories do not apply)
• TV-PG & above
• TV-14 & above
• TV-MA
(parental guidance suggested)
(14 years and older)
(mature audience)
Children TV Ratings:
• Unblocked
• TV-Y & above
(youth)
(individual content categories do not apply)
(youth, 7 years and up)
• TV-Y7
Content Categories:
• Dialog - sexual dialogue
• Language - adult language
• Sex - sexual situations
• Violence
(applies to TV-PG & above,
TV-14)
(applies to TV-PG & above,
TV-14 & above, TV-MA)
(applies to TV-PG & above,
TV-14 & above, TV-MA)
(applies to TV-PG & above,
TV-14 & above, TV-MA)
• F. Violence - fantasy violence (applies only to TV-Y7)
• No Rating (blocks all viewing)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V-Chip blocking (Parental control) setup
1. Press MENU, and then press x or • until the Special menu
appears.
MUTE
POWER
2. Press ENTER, and then press y or z to highlight V-Chip.
TV/VIDEO
MTS
RECALL
Press ENTER.
4
7
0
2
5
3
6
Special
Special
Language
Caption/Text
Captions
Panel lock
V-Chip
Language
Caption/Text
Captions
Panel lock
V-Chip
Number
Enter code
To set
8
9
_
CH RTN
Auto off
Auto off
ENTER EXIT MENU
0 ~ 9 Enter Password
ENTER
CH
VOL
VOL
• If you already set a password, enter your four-digit password.
• If you have not created a password, the TV is initially set up
with the password “0-0-0-0”.
ENTER
CH
yzx •
EXIT
MENU
PICTURE
FAV. CH
CC
• If you cannot remember your password, press "7-7-7-7."
SOUND
SLEEP
Parental
3. Enabling the Lock:
Lock
On
Set password
MPAA
Off
Press y or z to highlight Lock.
MENU
Press ENTER, and then press y or
z to select On (Lock) or Off
(Unlock).
Age block
Content block
Aux block
EXIT MENU
Parental
4. Set a password:
Lock
Set password
MPAA
Ent. code
Press y or z to highlight Set
password.
Age block
Content block
Aux block
Rep. code
_
_
_
_
Press ENTER, and then enter a
four-digit password.
Enter it again when requested.
0 ~ 9 Ebter Password
5. Press y or z to highlight the type of blocking to be set.
6. Press ENTER, and then press y or z to select the type of ratings
to block.
• The age block and Content block menus also have sub-menus;
therefore, you will need to repeat steps 5 and 6 to set the types
of blocking and ratings in the sub-menus.
Parental
Parental
Unblocked
Lock
General
Children
If you try to watch a TV program that exceeds
the rating limits you set, the TV enters program
lock mode.
Set password
MPAA
TV–G above
&
TV–PG
TV–14
TV–MA
&
above
above
Age block
Content block
Aux block
To set
&
Rating
:
TV-PG
V
TV
4
ENTER EXIT MENU
Parental
ENTER EXIT MENU
Parental
L
Parental lockout is active
Lock
Dialog
Unblocked
Set password
MPAA
Language
Sex
TV–PG
TV–14
&
above
Age block
Content block
Aux block
Violence
F.Violence
To set
ENTER EXIT MENU
ENTER EXIT MENU
22
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Adjusting the picture
Selecting the picture mode
Note:
You can select your desired picture type from four picture modes:
Dynamic, Standard, Movie, or Memory.
If you select one of the factory-set picture
modes (Dynamic, Standard, or Movie) and
then adjust a picture quality setting (for
example, increase the contrast), the picture
mode automatically changes to Memory in
the Picture menu.
Mode
Picture Quality
Dynamic
Standard
Movie
Bright and dynamic picture (factory setting)
Standard picture setting (factory setting)
Movie-like picture setting (factory setting)
Your personal preference
Memory
To select the picture mode:
MUTE
POWER
Press PICTURE repeatedly to select the mode you prefer.
TV/VIDEO
MTS
RECALL
Dynamic
Memory
Standard
4
7
0
2
5
3
6
8
9
CH RTN
Movie
ENTER
CH
VOL
VOL
ENTER
CH
You can also select the picture mode by using the Picture menu:
yzx •
1. Press MENU, and then press x or •
until the Picture menu appears.
Picture
EXIT
MENU
PICTURE
FAV. CH
CC
Picture mode
2. Press ENTER, and then press z or
Contrast
Dynamic
SOUND
SLEEP
Brightness
y to highlight Picture mode.
Standard
Color
Movie
MENU
Sharpness
3. Press ENTER, and then press z or
Memory
Tint
PICTURE
y to select the mode you prefer.
EXIT MENU
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, sharpness, and tint.
Selection
x
Pressing
•
Contrast
Brightness
Color
Sharpness
Tint
lower
darker
paler
softer
reddish
higher
lighter
deeper
sharper
greenish
To adjust the picture quality:
1. Press MENU, and then press x or •
until the Picture menu appears.
Picture
Picture mode
Contrast
Brightness
Color
Note:
To continue adjusting the other items, press y
or z in step 4.
2. Press ENTER, and then press y or
z until the item you want to adjust
is highlighted.
Sharpness
Tint
Contrast
85
ENTER EXIT MENU
3. Press ENTER.
4. Press x or • to adjust the level.
Contrast
85
The Picture qualities you adjusted can be saved in the TV’s Memory.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the closed caption feature
The closed caption feature has two options:
MUTE
POWER
• Captions—An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as “CC” in TV listings).
TV/VIDEO
MTS
RECALL
• Text—An on-screen display of information not related to the
current program, such as weather or stock data (when provided
by individual stations).
4
7
0
2
5
3
6
To select captions or text:
8
9
CH RTN
1. Tune the TV to the desired program.
2. Press MENU, and then press x or • to display the Special menu.
3. Press ENTER, and then press y or z to highlight Caption/Text.
ENTER
CH
VOL
VOL
ENTER
CH
yzx •
Special
Language
EXIT
MENU
PICTURE
FAV. CH
CC
Caption/Text
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4
Captions
Panel lock
V-Chip
SOUND
SLEEP
MENU
Auto off
EXIT MENU
4. Press ENTER, and then press y or z to select the Caption or
Text mode you prefer.
Special
Language
Caption/Text
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4
Captions
Panel lock
V-Chip
Auto off
EXIT MENU
Note:
• To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays
captions in the primary language in your area).
A closed caption signal may not display in the
following situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is nonstandard
Note: If the program or video you selected is not closed captioned, the
captions will not display on the screen.
Giant pandas eat leaves.
• To view text, select Text1, Text2, Text3, or Text4.
Note: If text is not available in your area, a black rectangle may appear on
your screen. If this happens, turn the Closed Caption feature Off.
WORLD WEATHER
Temps
Current
Weather
Clear
F
C
LONDON
MOSCOW
PARIS
51
57
53
66
65
11
14
12
19
18
Cloudy
Clear
ROME
Cloudy
Rain
TOKYO
24
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
To turn on or off the Closed Caption feature
1. Press MENU, and then press x or • to display the Special menu.
2. Press ENTER, and then press y or z to highlight Captions.
4
7
0
2
5
3
6
3. Press ENTER, and then press y or z to select On, Advanced
mute or Off.
8
9
CH RTN
• Advanced mute activates the selected Caption or Text mode
when the TV sound is muted.
ENTER
CH
VOL
VOL
ENTER
CH
Special
yzx •
Language
Caption/Text
Captions
Panel lock
V-Chip
On
Advanced mute
Off
EXIT
MENU
PICTURE
FAV. CH
CC
CC
Auto off
SOUND
SLEEP
EXIT MENU
MENU
The CC button on the remote control can also be used to select On,
Advanced mute (see page 30), or Off.
Using the Panel lock feature
TV top panel
You can lock the control buttons on the TV to prevent your settings
from being changed accidentally (by children, for example).
TV/VIDEO
VOLUME
CHANNEL
POWER
When the Panel lock is On, no control buttons on the TV top panel
will operate except POWER.
To lock the top panel:
Control buttons
1. Press MENU, and then press x or • to display the Special
menu.
2. Press ENTER, and then press y or z to highlight Panel lock.
MUTE
POWER
3. Press ENTER, and then press y or z to select On.
TV/VIDEO
MTS
RECALL
Special
4
7
0
2
5
3
6
Language
Caption/Text
Captions
On
Panel lock
Off
V-Chip
8
9
Auto off
CH RTN
EXIT MENU
ENTER
To unlock the top panel:
Select Off in step 3 above.
CH
VOL
VOL
ENTER
CH
yzx •
EXIT
MENU
PICTURE
FAV. CH
CC
Setting the sleep timer
To set the sleep timer to turn off the TV automatically:
SLEEP
MENU
SOUND
SLEEP
Repeatedly press SLEEP to set the length of time until the TV turns
off.
Sleep
30
Note :
• When an instant power failure occurs, the
sleep timer settings may be cleared.
Every time you press SLEEP, the time display will increase by 30
minutes, up to 120 minutes.
• To display the amount of time left until the
TV turns off automatically, press SLEEP
once.
30 → 60 → 90 → 120 →
To cancel the sleep timer:
Press SLEEP until “Sleep
” appears.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display “ Mute” in the lower left corner.
MUTE
RECALL
MTS
MUTE
POWER
When you select “MUTE” mode, the closed caption feature is
automatically activated. To deactivate this feature, deactivate MUTE.
This feature works only when the closed caption mode is set to
Advanced mute. See “Using the closed caption feature” on page 24 for
more information.
TV/VIDEO
MTS
RECALL
4
7
0
2
5
3
6
Selecting stereo/SAP broadcasts
8
9
CH RTN
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
CH
VOL
VOL
ENTER
CH
When the TV receives a stereo or SAP broadcast, the word “ST.SAP”,
“Stereo” or “SAP” appears on-screen every time the TV is turned on,
the channel is changed, or the RECALL button is pressed.
EXIT
MENU
PICTURE
FAV. CH
CC
The MTS feature is not available when the TV is in Video mode.
SOUND
SLEEP
To listen to stereo sound:
Repeatedly press MTS to select Stereo.
Stereo
You can leave your TV in Stereo mode because it will
automatically output the type of sound being broadcast (stereo or
monaural).
If the stereo sound is noisy, select Mono to reduce the noise.
To listen to SAP (if available):
Press MTS repeatedly to select SAP.
SAP
You will hear the station’s second audio program (if available)
from the speakers, while viewing the original program’s picture.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Using the WOW™ surround sound feature
Note:
WOW surround widens and deepens audio listening field to deliver
exceptional sound from the TV's speakers. The feature uses stereo
signals from a TV broadcast or video input.
If the broadcast is monaural, the WOW sound
effect will not work.
To activate the WOW feature:
1. Select Stereo mode (see “Selecting stereo/SAP broadcasts” on
page 26).
MUTE
POWER
2. Press MENU, and then press x or • until the Sound menu
appears.
TV/VIDEO
MTS
RECALL
3. Press ENTER, and then press y or z to highlight Sound mode.
4
7
0
2
5
3
6
4. Press ENTER, and then press y or z to select WOW.
Sound
8
9
Sound mode
WOW
CH RTN
Bass
Flat
Treble
Hall
Balance
Theater
StableSound
News
ENTER
CH
Memory
VOL
VOL
ENTER
CH
EXIT MENU
yzx •
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
Selecting the sound mode
You can select your desired sound type from six sound modes:
WOW, Flat, Hall, Theater, News, or Memory.
MENU
SOUND
Press SOUND repeatedly to select the appropriate sound mode as
shown:
WOW
Flat
Hall
Note:
If you select one of the factory-set audio
modes ( WOW, Flat, Hall, Theater, or News )
and then change a sound quality setting ( for
example, increase the bass ), the sound mode
automatically change to Memory mode.
Memory
News
Theater
Mode
Sound Quality
WOW
Flat
see above
flat sound ( factory setting )
Hall
a concert hall filled with a rich warm sound
( factory setting )
Theater
a movie theater filled with a dynamic sound
( factory setting )
News
Memory
news/dialogue ( factory setting )
your personal preference
You can also select the desired sound mode by using the Sound menu.
WOW, SRS, and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, and then press x or • until the Sound menu
appears.
2. Press ENTER, and then press y or z to highlight the item you
want to adjust.
MUTE
POWER
TV/VIDEO
MTS
RECALL
Sound
Sound mode
Bass
4
7
0
2
5
3
6
Treble
Balance
StableSound
Treble
8
9
ENTER EXIT MENU
CH RTN
3. Press ENTER.
ENTER
CH
4. Press x or • to adjust the level.
VOL
VOL
ENTER
CH
yzx •
Treble
+10
EXIT
MENU
PICTURE
FAV. CH
CC
• x makes the sound quality weaker or increases the balance in
the left channel, depending on the item selected.
• • makes the sound quality stronger or increases the balance in
SOUND
SLEEP
MENU
the right channel, depending on the item selected.
Note:
To continue adjusting the other items, press y or z in step 4.
Using the StableSound® feature
When the signal source is changed, the StableSound feature limits the
highest volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StableSound feature:
1. Press MENU, and then press x or • until the Sound menu
appears.
2. Press ENTER, and then press y or z to highlight StableSound.
3. Press ENTER, and then press y or z to select On.
Sound
Sound mode
Bass
Treble
On
Balance
Off
StableSound
EXIT MENU
To turn off the StableSound feature:
Select Off in step 3 above.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Using the PC setting feature
You can adjust the horizontal/vertical picture position, clock (to
minimize vertical stripes on the screen), and phase (to remove
horizontal noise and sharpen the picture).
TV top panel
TV/VIDEO
TV/VIDEO
MUTE
VOLUME
CHANNEL
POWER
You can auto-configure and reset these settings.
1. Confirm a PC is connected (see “Connecting a personal
computer (PC)” on page 15).
2. Repeatedly press TV/VIDEO to select PC input mode. (See
“Selecting the video input source” on page 20.)
3. Press MENU, and then press x or • until the PC menu appears.
POWER
4. Press ENTER, and then press y or z to select an item.
TV/VIDEO
TV/VIDEO
MTS
RECALL
PC
H-Position
V-Position
Clock
4
7
0
2
5
3
6
Phase
Auto configure
H-Position
76
Reset
8
9
CH RTN
ENTER EXIT MENU
5. Press Enter.
ENTER
CH
6. Press x or • to make the appropriate adjustments.
VOL
VOL
ENTER
CH
yzx •
• H-position/V-position
Adjusts picture left/right and up/down. The adjustment range
is 0–100. (The adjustable range may vary depending on the
input mode.)
EXIT
MENU
PICTURE
FAV. CH
CC
SOUND
SLEEP
MENU
• Clock
Minimizes any vertical bars or stripes appearing on the screen
background. The adjustment range is 0–100. (The adjustable
range may vary depending on the input mode.)
• Phase
Reduces (or minimizes) any horizontal noise and clears up or
sharpens the character images. The range adjustment is 0–100.
(The adjustable range may vary depending on the input mode.)
• Auto configure
Automatically adjusts the screen position, clock, and phase.
(The displayed image will disappear for a few seconds while
auto-configuration is in progress.)
• Reset
Returns to the default settings programmed at the factory. The
values in the Reset function cannot be modified.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Auto off feature
When the Auto off feature is set to On, the TV will automatically
turn itself off after approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the day. This
feature does not work when the Blue screen mode is set to Off.
MUTE
POWER
TV/VIDEO
MTS
RECALL
RECALL
To activate the Auto off feature:
4
7
0
2
5
3
6
1. Press MENU, and then press x or • until the Special menu
appears.
2. Press ENTER, and then press y or z to highlight Auto off.
8
9
CH RTN
3. Press ENTER, and then press y or z to Select On.
ENTER
CH
Special
Language
VOL
VOL
ENTER
CH
Caption/Text
yzx •
Captions
On
Panel lock
Off
V-Chip
Auto off
EXIT
MENU
PICTURE
FAV. CH
CC
EXIT MENU
SOUND
SLEEP
MENU
To deactivate the Auto off feature:
Select Off in step 3 above.
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Channel number or Video mode selected
• Stereo or SAP audio status
TV
6
ST.SAP
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns on the TV automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Appendix
Specifications
• This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
WARNING: RISK OF ELECTRIC SHOCK !
Never attempt to service the TV yourself. Opening and removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.
Television System
NTSC standard
Dimensions (Including TV stand)
15DL15: Width : 15 inches (379 mm)
Height : 15-3/8 inches (388 mm)
Depth : 8 inches (203 mm)
Channel Coverage
VHF: 2 through 13
20DL15: Width : 19-3/8 inches (491 mm)
Height : 18-1/2 inches (469 mm)
Depth : 9 inches (228 mm)
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Mass (weight)
15DL15: 12.4 lbs (5.6 kg)
20DL15: 20.9 lbs (9.1 kg)
Power Source
100-240 V AC, 60 Hz
Operating conditions
Temperature: 32°F – 95°F (0°C – 35°C)
Humidity: 20 – 80% (no moisture condensation)
Power Consumption
15DL15: 50 W
20DL15: 65 W
0.8 W in standby mode
Audio Power
5 W + 5 W
Video/Audio Terminals
S-VIDEO INPUT
Y : 1 V(p-p), 75 ohms, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohms
VIDEO/AUDIO INPUT
VIDEO: 1 V(p-p), 75 ohms, negative sync.
AUDIO: 400 mV(rms) (30% modulation equivalent,
22k ohms or greater)
ColorStream® (Component video) INPUT
Y : 1V(p-p), 75 ohms
PR: 0.7 V(p-p), 75 ohms
PB: 0.7 V(p-p), 75 ohms
AUDIO: 400 mV(rms), 22k ohms or greater
Suggested resolutions: 480i, 480p
AUDIO OUTPUT
400 mV(rms) (30% modulation equivalent,
2.2k ohms or less)
HEADPHONE jack
3.5 mm stereo mini jack
PC INPUT
15-pin D-sub Analog RGB
PC AUDIO INPUT
3.5 mm stereo mini jack
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and
some solutions.
Symptom
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• Make sure the MTS feature is set properly.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the Picture menu.
Poor reception of broadcast channels
Black box appears on the screen
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• The closed caption feature may be set to one of the Text modes
(Text1, Text2, Text3, or Text4). Turn closed captioning Off.
Unable to select a certain channel
Multiple images
• The channel may be erased with the Manual programming feature.
• The station may have broadcast difficulties. Try another channel.
• Antenna reception may be poor. Use a highly directional outdoor
antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the Tint and/or Color in the Picture menu.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
• Check the Panel lock feature.
The top panel buttons do not operate
The remote control does not operate
• Remove all obstructions between the remote control and the remote
control sensor in the TV.
• The remote control batteries may be dead. Replace the batteries.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Limited United States Warranty
for LCD Televisions, 20" and smaller
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to any
LCD Television or parts that have been lost or discarded by
you or to damage to the LCD Television or parts caused by
fires, misuse, accident, Acts of God (such as lightning or
fluctuations in electric power), improper installation,
improper maintenance, or use in violation of instructions
furnished by TACP; use or malfunction through simultaneous
use of this LCD Television and connected equipment; or to
units that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
following limited warranties to original consumers in the United
States. THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY PERSON
RECEIVING THIS LCD TELEVISION AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
LCD TELEVISIONS PURCHASED IN THE U.S.A. AND USED
ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY
THESE WARRANTIES.
LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF
THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA
AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED
BY THESE WARRANTIES.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual
and reviewing the section entitled “Troubleshooting,” you find
that service is needed:
Limited One (1) Year Warranty on Parts and Labor
(1) For instructions on how to obtain warranty service for your
LCD Television, contact TACP’s Consumer Solution Center
toll free at 1-800-631-3811.
TACP warrants this LCD Television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU.
(2) You must include the original bill of sale (or a copy thereof)
or other proof of purchase along with the entire LCD
Television to the Depot Warranty Repair Center specified by
the TACP Consumer Solutions Center. You are responsible
for all inbound transportation and insurance charges for the
LCD Television to the Depot Warranty Repair Center
specified by the TACP Consumer Solutions Center.
Rental Units
The warranty for LCD Television rental units begins on the date of
the first rental or thirty (30) days after the date of shipment to
the rental firm, whichever comes first.
For additional information, visit TACP’s website:
Limited Warranty for Commercial Units
TACP warrants LCD Televisions that are sold and used for
commercial purposes as follows: all parts are warranted against
defects in materials or workmanship for a period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF
THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TACP WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
REFURBISHED PART WITHOUT CHARGE TO YOU.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this LCD
Television.
Complete and mail the enclosed product registration card or
register your LCD Television online at
www.tacp.toshiba.com/service as soon as possible. By
registering your LCD Television you will enable TACP to bring you
new products specifically designed to meet your needs and help
us to contact you in the unlikely event a safety notification is
required under the U.S. Consumer Product Safety Act. Failure to
complete and return the product registration card does not
diminish your warranty rights.
MODIFICATION OR ERASURE OF RECORDED DATA CAUSED
BY USE, MISUSE OR INABILITY TO USE THIS LCD
TELEVISION).
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be
commenced to enforce any obligation of TACP arising under the
warranty or under any statute or law of the United States or any
state thereof is hereby limited to ninety (90) days from the date
you discover, or should have discovered, the defect. This
limitation does not apply to implied warranties arising under the
law of any state of the U.S.A.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this LCD Television must be made
by the Depot Warranty Repair Center specified by the TACP
Consumer Solutions Center.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF
AN IMPLIED WARRANTY, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE,
THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER
SUCH CIRCUMSTANCES.
(3) The warranties from TACP are effective only if this LCD
Television is purchased and operated in the Continental
U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by this warranty. Reception
problems caused by inadequate antenna systems,
misaligned satellite dishes, cable television distribution,
VCRs, DVD players/recorders, personal computer level IEEE-
1394 devices, and any other connected signal source device
are your responsibility.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Canada Warranty
for LCD Televisions, 20” and smaller
Toshiba Canada Limited, (“TCL”) makes the following limited
systems are not covered by this warranty. Reception
problems caused by inadequate antenna systems,
misaligned satellite dishes, cable television distribution,
VCRs, DVD players/recorders, personal computer level IEEE-
1394 devices, and any other connected signal source device
are your responsibility.
warranties to original consumers in Canada. THESE LIMITED
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS LCD
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to any
LCD Television or parts that have been lost or discarded by
you or to damage to the LCD Television or parts caused by
fires, misuse, accident, Acts of God (such as lightning or
fluctuations in electric power), improper installation,
improper maintenance, or use in violation of instructions
furnished by TCL; use or malfunction through simultaneous
use of this LCD Television and connected equipment; or to
units that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
LCD TELEVISIONS PURCHASED IN CANADA AND USED
ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT
LIMITATION, THE U.S.A. AND MEXICO, ARE NOT COVERED
BY THESE WARRANTIES.
LCD TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF
CANADA, INCLUDING, WITHOUT LIMITATION, THE U.S.A.
AND MEXICO, AND USED IN CANADA ARE NOT COVERED
BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
How to Obtain Warranty Service
TCL warrants this LCD Television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU. YOU MUST DELIVER THE ENTIRE
TELEVISION TO AN AUTHORIZED TCL SERVICE DEPOT. YOU
MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE
SERVICE DEPOT.
If, after following all of the operating instructions in this manual
and reviewing the section entitled “Troubleshooting,” you find
that service is needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
web site at www.toshiba.ca.
(2) You must include the original bill of sale (or a copy thereof) or
other proof of purchase along with the entire LCD Television to
the Authorized Service Depot. You are responsible for all
inbound transportation and insurance charges for the LCD
Television to the Authorized Service Depot.
Rental Units
The warranty for LCD Television rental units begins on the date of
the first rental or thirty (30) days after the date of shipment to
the rental firm, whichever comes first.
For additional information, visit TCL’s website:
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
LOST PROFITS, BUSINESS INTERRUPTION, OR
Limited Warranty for Commercial Units
TCL warrants LCD Televisions that are sold and used for
commercial purposes as follows: all parts are warranted against
defects in materials or workmanship for a period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU. YOU MUST DELIVER THE
ENTIRE TELEVISION TO AN AUTHORIZED TCL SERVICE
DEPOT. YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE TELEVISION TO AND FROM
THE SERVICE DEPOT.
Owner’s Manual and Product Registration
Read this owner’s manual thoroughly before operating this LCD
Television.
MODIFICATION OR ERASURE OF RECORDED DATA CAUSED
BY USE, MISUSE, OR INABILITY TO USE THIS LCD
TELEVISION).
soon as possible. By registering your LCD Television you will
enable TCL to bring you new products specifically designed to
meet your needs and help us to contact you in the unlikely event
a safety notification is required. Failure to register your LCD
Television does not diminish your warranty rights.
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be
commenced to enforce any obligation of TCL arising under the
warranty or under any law of Canada or any province thereof is
hereby limited to ninety (90) days from the date you discover, or
should have discovered, the defect. This limitation does not apply
to implied warranties arising under the law of any province of
Canada.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY
FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
(1) You must retain your original bill of sale or provide other
proof of purchase.
(2) All warranty servicing of this LCD TV must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if this LCD
Television is purchased in Canada from an authorized TCL
dealer and operated in Canada.
DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT
APPLY TO YOU UNDER SUCH CIRCUMSTANCES. [0305]
(4) Labour service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
34
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
S
Index
S
A B
S-video cables ......................................................................10
SAP sound..............................................................................26
Set-top box ............................................................................13
Sleep timer .............................................................................25
Sound mode selection.......................................................27
Sound quality adjustments ..............................................28
Specifications........................................................................31
Antenna cables ....................................................................10
Audio system connection.................................................14
Auto off....................................................................................30
A/V cables..............................................................................10
Back of the TV ........................................................................ 8
C
StableSound®
............................................................................................................................
28
Cable converter box connection ...................................11
Camcorder connection......................................................14
CH yz buttons ....................................................................18
CH RTN button .....................................................................20
Channel Number buttons ................................................20
Channel programming
Stereo sound .........................................................................26
T
Troubleshooting ...................................................................32
TV/VIDEO button.................................................................20
Automatic programming .............................................18
Memory/ERASE ..............................................................19
Closed caption......................................................................25
Component video cables..................................................10
V
V-Chip
Age block...........................................................................22
Aux block ...........................................................................22
Content block...................................................................22
MPAA ..................................................................................22
Password............................................................................22
VCR connection ........................................................... 11–13
VOL button.............................................................................16
D E
DTV receiver connection ..................................................13
DVD connection...................................................................12
F G H I K
FAV. CH button .....................................................................19
Favorite channels ................................................................19
Front of the TV........................................................................ 8
W
Warranty .......................................................................... 33, 34
WOW™ surround .................................................................27
L M
Language selection ............................................................18
Last mode memory .............................................................30
Menu system.........................................................................17
MTS...........................................................................................26
MUTE button .........................................................................26
O P Q
Panel lock ...............................................................................25
PC connection ......................................................................15
PC setting ...............................................................................29
Picture adjustments
Picture mode ....................................................................23
Picture quality ..................................................................23
POWER button .....................................................................16
R
RECALL button ....................................................................30
Remote control
Battery installation .........................................................16
Learning about the buttons ........................................16
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HEAD OFFICE:82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470, U.S.A.
NATIONAL SERVICE DIVISION:1420B TOSHIBA DRIVE, LEBANON, TN. 37087, U.S.A.
HEAD OFFICE/191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J-4A1, CANADA TEL:(514)390-7766
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500
ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
YC/L 72742101
Download from Www.Somanuals.com. All Manuals Search And Download.
|