Owner’s Record
The model number and serial number are on
the back of this unit. Record these numbers in
the spaces below. Refer to these numbers whenever
you communicate with your Toshiba dealer about this unit.
Model number:
© 2011 Toshiba Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
The lightning flash with arrowhead symbol, within an
CAUTION
equilateral triangle, is intended to alert the user to the
RISK OF ELECTRIC SHOCK
presence of uninsulated“dangerous voltage”within the
product’s enclosure that may be of sufficient magnitude
DO NOT OPEN
to constitute a risk of electric shock to persons.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
The important note and rating are located on the rear or
bottom of the cabinet.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
7. Do not block any ventilation openings. Install in
bracket, or table specified by the
accordance with the manufacturer’s instructions.
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Instructions
Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and
serious damage to the apparatus.
19. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal
injury and apparatus malfunction.
20. If the apparatus should smoke or smell, immediately disconnect the power cord from the wall outlet. Wait until the
smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
While it is thundering, do not touch the connecting cables or the apparatus.
22. Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
23. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
T o Avoid the Hazards of Electrical Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact Toshiba Customer Service.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Installation Location
Supplied Accessories
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
Remote control with
AA (1.5 V) battery x 2
RCA audio/video cables
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
OWNER’S MANUAL
Quick Guide
OWNER’S MANUAL
If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
About Copyright
Return stop sheet
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited. This item
incorporates copy protection technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
Please refer to relevant topics on “TROUBLESHOOTING”
on pages 96 - 99 before returning the product.
• If you need to call a customer service representative,
please know the model number and serial number
of your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If
you believe the representative will need to help you
with operations, please stay near the product. Our
representatives will be happy to assist you.
If the remote control does not work properly, you can test if
the remote control sends out the infrared signal with a
digital camera (including built-in camera of cellular phone). It
will help to define the cause of malfunction.
With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
Cleaning the Cabinet
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near
the unit. Such chemicals may discolor the surface or
damage the unit.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not wipe
in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the Disc Lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Disc Handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not
used.
Auto Head Cleaning
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated
on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in your unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase
a good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem, please
consult your dealer or an Authorized Service Center.
• Remember to read the instructions along with the
video head cleaner before use.
Clean video heads only when problems occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Disc Management
PRECAUTIONS
2
FORMATTING A DISC
28
Choosing the Recording Format of
a Brand-New DVD-RW
Reformatting a Disc Manually
SETTING A DISC TO PROTECT
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
28
29
30
31
31
Symbols Used in this Owner’s Manual
FUNCTIONAL OVERVIEW
Front Panel
8
11
11
12
14
15
Rear Panel
Remote Control
THE VCR / DVD RECORDER SWITCHING
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
On-Screen Display / Menu
Main Menu
FRONT PANEL DISPLAY GUIDE
Finalizing a Disc
Recording
INFORMATION ON DVD RECORDING
Recording Mode
Restrictions on Recording
Make Recording Compatible
Setting for Auto Chapter
Recording Audio Select (XP)
Setting Aspect Ratio for Video Mode Recording
BASIC RECORDING & ONE-TOUCH
TIMER RECORDING
TIMER RECORDING
SATELLITE LINK
Connection to an External Device
Recording from an External Device
17
18
34
34
34
Connections
CONNECTIONS
Connecting to an External Tuner
TV Connection Overview
Connecting to a TV Using an HDMI Compatible Port 20
Connecting to a TV Using Component
Video Input Jacks
Connecting to a TV Using an S-Video Input Jack
Connecting to a TV Using Audio / Video Input Jacks 22
Connecting to a TV without Audio /
35
35
36
36
19
19
21
21
37
39
43
Video Input Jacks
Digital Audio Connection
22
23
44
45
Basic Setup
Guide to DV and On-Screen Display
DVC to DVD Dubbing
46
47
INITIAL SETTING
25
SETTINGS FOR THE VIDEO INPUT
DVD/VCR DUBBING 49
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playback
Editing
INFORMATION ON PLAYBACK
Structure of Disc Contents
BASIC PLAYBACK
51
51
52
52
53
INFORMATION ON DISC EDITING
68
68
68
69
71
72
73
73
75
76
77
79
Guide to a Title List
Editing Discs
DELETING TITLES
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Erasing All Playlist
Direct Playback
Playback from the Title List
Playing Back an Audio CD and a CD-RW/-R
with MP3/WMA/JPEG Files
Using the Title/Disc Menu
Pause
SPECIAL PLAYBACK
Resume Playback
Fast Forward / Fast Reverse Playback
Skipping TV Commercials During Playback
Rapid Playback
Step by Step Playback
Slow Forward / Slow Reverse Playback
Zoom
54
55
55
56
56
56
56
57
57
57
58
EDITING DISCS
Putting Names on Titles
Setting Chapter Marks
Hiding Chapters
Deleting a Part of a Title
Dividing a Title
Setting or Releasing the Title Protection
Setting or Clearing All Chapter Marks at Once
81
82
Function Setup
Chasing Playback during Recording
Simultaneous Playback and Recording
SEARCH
Title/Chapter Search
Track Search
59
60
61
61
61
LIST OF THE DEFAULT SETTINGS
83
Playback
Display
Video
HDMI
Reset All
85
89
90
91
92
62
REPEAT/RANDOM/PROGRAM PLAYBACK/
Repeat Playback
Random Playback
Program Playback
Slide Show
SELECTING THE FORMAT OF AUDIO AND VIDEO 65
Switching Audio Soundtrack
Switching Virtual Surround System
Switching Camera Angles
Reducing Block Noise
63
63
64
64
VCR Function
VCR FUNCTIONS
Information on VCR Functions
Playback
Recording
One-touch Timer Recording (OTR)
Index Search
93
93
93
93
94
94
95
95
65
66
66
67
67
Time Search
Other Operations
Adjusting Black Level
Others
TROUBLESHOOTING
96
99
Frequently Asked Questions
GLOSSARY 101
LIMITED WARRANTY 103
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape
and edit them after that. The following features are offered with this unit.
Recording
Editing
Deleting titles:
You can delete titles which you do not need anymore.
This unit is compatible with recording on DVD-RW/+RW
which is recordable repeatedly and DVD-R/+R which accept
the additional recordings until the disc becomes full but not
overwritable. You can choose either one for your convenience.
Also, this unit allows you to record to the cassette tape.
Setting or clearing chapter marks:
You can set or clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Up to 12 program recording:
You can program the unit to record up to 12 programs,
within a month in advance. Daily or weekly program
recordings are also available.
Deleting parts of titles:
You can delete a specific part of a title.
Dividing or combining titles:
You can divide or combine a title.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every time
[REC I] is pressed during recording, the recording time will
be increased by 30 minutes up to 8 hours. The recording
automatically stops when the recording time you set is
reached.
Editing title names:
You can change the title name you prefer.
Compatibility
Dubbing mode:
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the DVD
or a cassette tape is not copy protected. You cannot record on
Available for playing back discs on a regular DVD player:
Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+RW/+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance.
a
cassette tape when its erase-protection tab is removed.
DV dubbing:
This function helps you to easily dub the contents of the DVC
(digital video camcorder) to DVD, and DV (digital video) to VCR.
Left channel stereo recording:
This unit can record the sound of the left channel monaural
input as left and right channels automatically.
Others
Progressive scan system
Automatic chapter mark setting:
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title menu making:
The unit creates title menu automatically when finalizing discs.
HDMI (High-Definition Multimedia Interface)
Automatic playlist making:
You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.
The unit creates a playlist automatically after recording VR
mode DVD-RW.
Automatic title finalizing:
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
For video mode DVD-RW/-R and DVD+R recording, you can
finalize discs automatically after finishing all timer recordings
or at the end of the disc space if you set this in the main menu.
Playback
Symbol Description
For Recording, Playing Back, and Editing
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you can experience the
theater surround sound from discs with surround sound system.
Description refers to DVD-RW in video mode
Description refers to DVD-RW in VR mode
Description refers to DVD-R in video mode
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter/track or time.
Description refers to DVD+RW
Description refers to DVD+R
Description refers to VHS tapes
Virtual surround system:
You can enjoy stereophonic space through your existing 2
channel stereo system.
Playing back MP3/WMA/JPEG files:
You can enjoy MP3/WMA/JPEG files which are recorded on
CD-RW/-R.
Use only cassettes marked VHS (
).
For Playback only
Quick search for what you want to watch:
You can go to a specific point on a cassette tape by entering
the exact amount of time you wish to skip.
Description refers to DVD-video
Description refers to audio CD
You can easily find the part you want to watch using the index
search/time search functions. An index mark will be assigned
at the beginning of each recording you make. For time search
function, you can go to a specific point on a cassette tape by
entering the exact amount of time you wish to skip.
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with WMA files
Description refers to CD-RW/-R with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for Recording, Playing back
Disc type
Logo
DVD-RW
DVD-R
DVD+RW
DVD+R
Automatically
formatted in
video mode
Automatically
formatted in
+VR mode
Automatically
formatted in
+VR mode
Can be formatted in VR or video
mode
Format
Video Mode
VR Mode
Icon
Maximum record 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm) 480 min (12cm)
time 144 min (8cm)
144 min (8cm)
144 min (8cm)
144 min (8cm)
144 min (8cm)
1X-6X
Disc Speed
Versions
1X-16X
Ver.2.0/ 2.1
Ver.1.1/ 1.2
1×-4×
1×-16×
Ver.1.1/ 1.2 CPRM compatible
Playable on
DVD+RW
compatible
players.
Finalization
recommended.
(title menu will
be created)
Playable on
most DVD
players.
Playable on
most DVD
players.
Playable on
most DVD
Playable only
on VR mode
players.
Compatibility Finalization
necessary.
compatible unit. Finalization
Finalization necessary.
recommended. (title menu will
be created)
Finalization
recommended.
(title menu will
be created)
(title menu will
be created)
Recording Features
Record TV
✓
✓
✓
✓
✓
✓
✓
programs
Reuse by deleting
the current
contents
✓
✓
Record 16:9 size
pictures
✓
✓
✓
Record copy-once
programs
✓
Create chapters
at fixed intervals
(auto chapter)
✓
✓
✓
✓
✓
Editing Features
Scene delete
Playlist Original
✓
✓
Edit title name
✓
✓
✓
✓
✓
✓
✓
✓
Create chapters
wherever you like
(chapter mark)
✓
✓
Divide a title
Combine titles
Hide chapters
Delete a title
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Create a
playlist
Protect a title
✓: Available
Gray: Not available
*CPRM compatible disc only.
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for playing back
DVD-VIDEO
Disc Type
Logo
CD-DA
CD-RW
CD-R
Icon
Files for playing back
MP3
Recording/Playing back
Type of title
Icon
WMA
JPEG
VCR
Media
CD-RW/-R
CD-RW/-R
CD-RW/-R
Cassette Tape
is a trademark of DVD Format/Logo Licensing Corporation.
Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition, the unit
may not read the disc properly.
* This unit cannot play back the disc contents protected
by Windows Media Digital Rights Management (DRM).
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
Unplayable Discs
JVC
DVD-RW 4x
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
The following discs will not play back on this unit.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD) • DVD-ROM
Performance of any other discs are not guaranteed.
• DVD-audio
• Unfinalized disc
• Toshiba is not liable for any damage or loss caused directly
or indirectly by the malfunction of this recorder, including,
without limitation, any one of the following:
• DVD-RW/-R recorded in non compatible recording format
• Blu-ray DiscMC
• HD DVD
• DVD/CD contains DivX® files
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
• Failure to record contents intended to be recorded by
the consumer.
• Failure to edit contents as intended by the consumer.
• When a DVD-RW/-R, DVD+RW/+R disc created on this
recorder is used (e.g., insertion, playback, recording or
editing) in another DVD player, recorder or personal
computer drive.
• When a DVD-RW/-R, DVD+RW/+R disc that is used in
the manner described in the immediately preceding
bullet point is used again in this recorder.
• When a DVD-RW/-R, DVD+RW/+R disc that was
recorded in another DVD recorder, or in a personal
computer drive is used in this recorder.
Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
• Some functions may not work with personal computer
discs.
• Discs recorded in this recorder may not operate as
expected on other DVD players, recorders or personal
computer drives.
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this DVD
Video Recorder will successfully play every disc bearing the
DVD and CD logos. If you happen to experience any
difficulty playing a DVD and/or CD disc on this DVD Video
Recorder, please contact Toshiba Customer Service.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
DVD players with
recorded in VR mode.
are capable of playing DVD-RW
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
1
2
3*
4
5
6
7
VCR
DVD
TRACKING
DUBBING
SELECT
( ) The unit can also be
turned on by pressing
these buttons or by
L2
L
L3
VIDEO
R
DV IN
inserting a cassette tape.
22 21 20 19 18 1716 15 14 13 12 11 10 9* 8
1. I/y ON/STANDBY button (DVD/VCR)
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
14. TRACKING
/
buttons (VCR)
• Press to adjust the tracking during playback or in slow
motion of the cassette tape.
• While playback is in still mode, you can stabilize the picture.
15. Display (“Off ” in standby)
2. Cassette compartment (VCR)
• Insert a cassette tape here.
• Refer to “FRONT PANEL DISPLAY GUIDE” on page 18.
16. Infrared sensor window (DVD/VCR)
• Receive signals from your remote control so that you can
control the unit from a distance.
3. A OPEN/CLOSE button (DVD)*
• Press to open or close the disc tray.
4. Disc tray (DVD)
• Place a disc when it is open.
17. I REC button (VCR)
5. VIDEO input jack (L2) (DVD/VCR)
• Use to connect external device with an RCA video cable.
6. AUDIO input jacks (L2) (DVD/VCR)
• Use to connect external device with an RCA audio cable.
7. DV IN jack (L3) (DVD/VCR)
• Press once to start a recording. Press repeatedly to start the
one-touch timer recording.
18. PLAY B button (VCR)
• Press to start playback.
19. EJECT/STOP A/C button (VCR)
• Use to connect the DV output of external device with a DV cable.
8. I REC button (DVD)
• When the unit is in stop mode, press to remove the
cassette tape from the cassette compartment.
• Press to stop cassette tape playback or recording.
• Press to stop the proceeding timer recording in VCR.
20. FWD D button (VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
9. PLAY B button (DVD)*
• Press to start or resume playback.
10. STOP C button (DVD)
• Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward search).
21. REV E button (VCR)
• Press to stop playback or recording.
• Press to stop the proceeding timer recording in DVD.
11. VCR/DVD indicator
• Press to rewind the cassette tape, or to view the picture
rapidly in reverse during playback (rewind search).
22. Power indicator
• Lights up when the VCR/DVD output mode is selected.
12. VCR/DVD button (DVD/VCR)
• This indicator lights up in green when the unit is active and
turns off when the unit is in standby mode.
• Press to select the component you wish to operate.
13. DUBBING button (DVD/VCR)
• Press to start VCR to DVD (DVD to VCR) duplication which
you set in the main menu.
Rear Panel
1
2
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
10 3 9 8 7 6 5 4 3
1. AC Power Cord
8. COMPONENT VIDEO OUT jacks
• Connect to a standard AC outlet to supply power to this unit.
• Unplug this cord from the AC outlet to completely shut
down the unit.
• Use to connect a TV monitor with component video inputs
with a component video cable.
9. S-VIDEO OUT jack
2. HDMI OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
10. COAXIAL DIGITAL AUDIO OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
3. AUDIO OUT jacks
• Use to connect an AV receiver, Dolby Digital decoder or other
device with a coaxial digital input jack with a digital coaxial cable.
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
4. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
5. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
6. AUDIO IN jacks (L1)
This unit does not have the RF modulator.
Caution on using S-video, component, or HDMI
connection for VCR:
• Only the playback audio / video is available with
these connections.
• Use to connect external device with an RCA audio cable.
7. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote Control
Using a Remote Control
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
Install 2 AA (1.5 V) batteries matching the polarity indicated
inside battery compartment of the remote control.
•
Open the cover.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
Line of sight: approx. 23 feet (7m)
Either side of the center:
approx. 23 feet (7m) within 30°
VCR
DVD
TRACKING
DUBBING
SELECT
L2
L
L3
VIDEO
R
DV IN
30˚
30˚
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
23 feet (7m) 23 feet (7m)
23 feet (7m)
16
17
1
OPEN/
INPUT
CLOSE SELECT
HDMI
DEF
2
.@/:
GHI
ABC
JKL
TRACKING
MNO
18
3
PQRS
TUV
WXYZ
SAT.LINK
19
20
21
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
4
5
22
27
DISC MENU
Never throw batteries into a fire.
23
ENTER
Do not mix old and new batteries.
6
7
24
25
CLEAR
RETURN
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
• Dispose of batteries in a designated disposal area.
Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
INSTANT 1.3x/0.8x
SKIP
TIME SLIP
FWD
PLAY
26
28
29
8
REV
PLAY
STOP
9
10
SKIP
SKIP
DVD
11
PAUSE
30
32
34
VCR
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.
• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
12
13
14
31
33
35
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
15
36
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
1. INPUT SELECT button
18. TRACKING
/
buttons (VCR)
• Press to select the appropriate input.
2. OPEN/CLOSE A button
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can stabilize the
picture.
DVD mode:
• Press to open or close the disc tray.
VCR mode:
19. SAT.LINK button
• Press to remove the cassette tape from the cassette
compartment.
• Press to turn the unit into the satellite link standby
mode.
3. Number/Character buttons
• Press to enter values for the settings in the main menu.
DVD mode:
• In the satellite link standby mode, press to cancel the
mode and to turn the unit on.
20. TIMER PROG. button
• Press to select a title/chapter/track/file on display.
• Press to enter title names.
• Press to display the timer programming list.
21. AUDIO
button
VCR mode:
DVD mode:
• Press to start the index/time search.
4. SETUP button
• During playback, press to display the audio menu.
VCR mode:
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
• During the playing of a HiFi video tape, press to
change the audio out setting to HiFi or mono.
22. DISPLAY button
to the interlace mode. (Though
appears, the
• Press to display the display menu on or off.
23. TOP MENU button (DVD)
output mode switches to the interlace and
” will be displayed on the front panel
• Press to display the title list.
display briefly.)
24. ENTER button
5. DISC MENU button (DVD)
• Press to confirm or select menu items.
25. RETURN button
• Press to display the disc menu. To change original
and playlist on the TV screen.
6. Cursor K / L / { / B buttons
• Press to select items or settings.
7. CLEAR button
• Press to return to the previous displayed menu screen.
26. TIME SLIP button (DVD)
•
Press once to start recording the TV program you are
watching. Press again to watch the content being recorded
from the beginning while recording continues. (VR mode
DVD-RW with the recording mode of LP, EP or SLP only)
DVD mode:
• Press to clear the password once entered, to cancel
the programming for CD, to clear the selecting
marker number in the display menu, etc.
VCR mode:
27. 1.3x/0.8x PLAY button (DVD)
• During playback, press to play back in a slightly
faster/slower speed while keeping the sound output.
28. FWD D button
• Press to reset the tape counter.
8. INSTANT SKIP button (DVD)
• During playback, press to skip 30 seconds.
9. REV E button
DVD mode:
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward playback.
VCR mode:
DVD mode:
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse playback.
VCR mode:
• During playback, press to view the picture rapidly in
forward.
• Press to fast forward the cassette tape in stop mode.
• When playback is paused, press to view the cassette
tape in slow motion.
During playback, press to view the picture rapidly in reverse.
• Press to fast reverse the cassette tape in stop mode.
1 0. PLAY B button
29. SKIP G button (DVD)
• Press to start playback or resume playback.
11. SKIP H button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• During playback, press to return to the beginning of
the current chapter, track or file.
• During playback, press twice in quick succession to
skip to the previous chapter or track.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
12. PAUSE F button
• When playback is in pause, press repeatedly to
forward the playback step by step.
30. STOP C button
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
31. DVD button
• Press to pause playback or recording.
1 3. DUBBING button
• Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
14. REPEAT button
• Press to select the DVD output mode.
32. VCR button
• Press to select the VCR output mode.
33. REC I button
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
34. REC MODE button
DVD mode:
• Press to select the repeat mode.
VCR mode:
Press to set or release the Auto Repeat Playback. In the
Auto Repeat Playback mode, tape is played to its end, the
tape will rewind to the beginning and start playback itself.
• Press to switch the recording mode.
35. ZOOM button (DVD)
•
• During playback, press to enlarge the picture on the
TV screen.
1 5. TIMER SET button
36. SEARCH button (VCR)
•
Press to set the unit in the timer standby mode. In the timer
standby mode, press to cancel the mode and to turn the unit on.
• Press to call up the index or time search menu.
16. HDMI button (DVD)
• Press to set the HDMI video resolution.
17. I/y ON/STANDBY button
If you turn off this unit, [OPEN/CLOSE A] on the
remote control is not available.
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord).
Be sure to use [A OPEN/CLOSE] or [EJECT/STOP A/C]
on the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
THE VCR / DVD RECORDER SWITCHING
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you want
to operate with [VCR/DVD]
Press [DVD] on the remote control.
Press [VCR] on the remote control.
(Verify that the DVD indicator is lit.)
(Verify that the VCR indicator is lit.)
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
VCR
DVD
TRACKING
DUBBING
SELECT
TRACKING
L2
L
L3
VIDEO
R
DV IN
PQRS
TUV
SAT.LINK
TIMER
SPACE
VCR indicator
DVD indicator
PROG.
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
VCR
DVD
SELECT
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
DVD button
VCR button
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
• You cannot switch to the other mode in the timer-standby mode.
Playback will stop when you change the output mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.
On-Screen Display / Menu
The on-screen display changes in the following order
Disc Information / Menu
as you press [DISPLAY].
5
2
OFF
1/
5
1/
5
0:01:00 / 1:23:45
-RW VR ORG
L1 (Rear)
Disc Information/Menu
6
1
3
Title Name Information
(only when DVD+RW/+R, VR mode DVD-RW/-R, or
unfinalized Video mode DVD-RW/-R is in playback)
or
SP
1:53
4
7
File Name Information
* This is an example screen only for explanation.
(only when a CD with MP3/WMA/
1. Indicates a disc type and format mode.
2. Indicates a type of titles for VR mode DVD-RW .
3. Indicates a selected external input mode.
4. Indicates a recording mode and possible recording
time left.
5. Indicates a title number / total number of titles, chapter
number /total number of chapters, elapsed time and
total time of disc playback.
JPEG files is in playback)
MP3/WMA Tag Information
(only when MP3 or WMA file is in playback)
HDMI Information
(only for the images output through the HDMI output)
6. Each icon means:
:
:
:
:
:
:
Noise Reduction / Black Level
: Angle
:
: Repeat
Indicates an operation status.
• In some descriptions on this manual, only one disc
type is indicated as an example.
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Information
MP3/WMA Tag Information
1
12:00AM
2
SP
0:00:00
HIFI
3
4
5
• If you press [DISPLAY] one more time, album name
* This is an example screen only for explanation.
1. Indicates current video status.
will be displayed.
Album Name
3. Indicates a recording or playing back mode.
4. Indicates a tape counter.
5. Audio status of the current cassette tape.
• If there is no artist, track or album name, “Not Available”
will be displayed.
VCR information does not appear on the screen
when the unit is connected by an HDMI, Component
or S-Video cable, except during the playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS
Press [SETUP] to display the main menu. Then use
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
[K / L] to select a menu and press [ENTER] to display the
menu. These menus provide entries to all main functions
of the unit.
To call up the title list.
Setup
4. DVD Menu:
To set up the DVD setting.
5. DISC Playback Mode:
To set up the disc playback setting.
• “DISC Playback Mode” is available only when an
audio CD, a CD-RW/-R with MP3 / WMA / JPEG files is
inserted into the unit.
General Setting
1
Timer Programming
Title List
DVD Menu
DISC Playback Mode
General Setting Menu
1. Playback:
General Setting
1
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
2
Playback
Display
Video
Recording
Clock
HDMI
Reset All
3
4
5
26
37
4
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock.
6. HDMI:
To set up the HDMI connection setting.
7. Reset All:
To reset the setting to the factory default.
DVD Menu / DISC Playback Mode
<DVD Menu>
1. Format (DVD-RW, DVD+RW only):
Allows you to format the disc.
DVD Menu
2. Finalize:
1
2
3
4
Format
Finalize
Disc Protect OFF
Allows you to finalize a disc containing recorded titles.
3. Disc Protect (VR mode DVD-RW, DVD+RW/+R only):
Allows you to protect a disc from accidental editing or
recording.
ON
Delete All Playlists
4. Delete All Playlists (VR mode DVD-RW only):
Allows you to delete playlist.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
7. Music:
Allows you to make settings for MP3 / WMA playback.
8. Photo:
<DISC Playback Mode menu>
When an Audio CD is inserted:
DISC Playback Mode
15
26
Random Play
Program Play
Allows you to make settings for JPEG playback.
9. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show
mode.
When a JPEG / MP3 / WMA disc is inserted:
DISC Playback Mode
Music
Photo
37
38
Random Play
Slide Show
35
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL DISPLAY GUIDE
2
BS CS
DR
CD
VCR
1
PM
3
DB HDD
DVD
4
1.
: Appears when this unit is in
DVD output mode and a disc
is in the unit.
: Appears during duplication
process.
: Appears during VCR to DVD
duplication process.
: Appears during DVD to VCR
duplication process.
DB
: Appears in the afternoon with
the clock display.
PM
2. Title / track and chapter mark
4. Displays the following
: Appears when indicating a
title / track number.
: Appears when this unit is in
VCR output mode and a
cassette tape is in the unit.
: Appears during duplication
process.
• Elapsed playback time
• Current title / chapter / track /file
number
• Recording time / remaining time
• Clock
• Selected external input position
• Remaining time for one-touch
timer recording
• Selected HDMI video resolution
: Appears when indicating a
chapter number.
3. Current status of the unit
: Appears when this unit is in
VCR output mode.
: Appears when the timer
recording is proceeding in VCR.
: Appears when VCR is in the
timer recording standby mode.
: Flashes when a program
cannot be performed for
VCR
: Appears when playback is
paused.
: Appears when playing back a
disc.
: Appears when the timer
programming or OTR has
been set and is proceeding.
: Flashes when all timer
recordings have been
finished.
• Front panel display stays off while
the unit is in the standby mode.
This is a new Power Save (ECO)
feature.
: Appears when this unit is in
DVD output mode.
DVD
: Appears during recording
process.
: Appears when the timer
recording is proceeding in DVD.
: Flashes when a recording
pauses.
: Appears when DVD is in the
timer recording standby mode.
: Flashes when a program
cannot be performed for
some reasons.
Display Message
Appears when the disc tray is
opening.
Appears when HDMI video
resolution (480p) is selected.
DVD
DVD
DVD
DVD
DVD
Appears when HDMI video
resolution (720p) is selected.
DVD
Appears when the disc tray is
closing.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI video
resolution (1080i) is selected.
DVD
Appears when data is being
Appears when HDMI video
resolution (1080p) is selected.
DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
1) Disconnect the AC power cords of the devices from the AC outlet.
2) M ake the connection as illustrated below.
3) After making all the connections, connect the AC power cords of the devices.
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures
may be distorted due to the copy protection system.
Connecting to an External Tuner
RCA video cable
RCA audio cable
IN --- AUDIO---OUT
(L1)
AUDIO IN
RCA audio cable
RCA video cable
L
L
R
L
L
AUDIO OUT VIDEO OUT
R
R
R
VIDEO IN
IN ---VIDEO---OUT
external tuner
satellite
dish
ANT.OUT ANT. IN
rear of this unit
ANT. IN RF coaxial cable
RF coaxial cable
HDMI OUT
DVD/VCR
or
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
cable TV
company
PR
/CR
R
After making the connection as described above, make sure to select the appropriate input type by following the
steps on page 27.
Note
Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jacks or
HDMI OUT jack for connecting to your TV.
With this setup:
You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/
satellite box is turned on.
• You cannot record one channel while watching another channel.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
If Your TV has
Refer to
If your device has only
an ANT. IN jack
Higher
Quality
HDMI IN
page
20
page
22
ANT. IN
page
21
COMPONENT VIDEO IN
S-VIDEO IN
page
21
page
22
Standard
Quality
R
L
AUDIO IN VIDEO IN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting to a TV Using an HDMI Compatible Port
HDMI IN
HDMI cable
HDMI OUT
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
T
T
T
HDMI OU
HDMI OU
HDMI OU
Do not tilt the connector when inserting it into the HDMI jack, and make sure
the shapes of the jack and the connector are matched.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
HDMI Video Resolution and Actual Output Signals
Press [HDMI] to select the HDMI video resolution. The video resolution changes as follows every time [HDMI] is
pressed.
Copyright protection system
Front Panel Display Video Output Signal
480 Progressive
To play back the digital video images of a DVD via
an HDMI connection, it is necessary that both the
player and the display device (or an AV amplifier)
support a copyright protection system called
HDCP (high-bandwidth digital content protection
system). HDCP is copy protection technology that
comprises data encryption and authentication of
the connected AV device. This unit supports
HDCP. Please read the operating instructions of
your display device (or AV amplifier) for more
information.
Press [HDMI]
720 Progressive
Press [HDMI]
1080 interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
*HDMI: High Definition Multimedia Interface
• The HDMI mode that is not supported by display device will be skipped.
Note
Some devices with an HDMI input may not operate properly with this unit.
When using an HDCP-incompatible display device, the image will not be viewed properly.
Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however this
unit cannot be controlled by another device via the HDMI connector.
The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) may be limited by the device that is connected.
Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector.
When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please
check and set the HDMI setting again.
HDMI video resolution cannot be changed when the unit is in VCR mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting to a TV Using Component Video Input Jacks
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUT
(Green)
(Blue)
(Red)
(Green)
(Blue)
(Red)
Y
RCA
component
video cable
Y
PB
/CB
PB
/CB
AUDIO
OUT
PR
/CR
PR
/CR
VIDEO IN
L
AUDIO IN
RCA audio cable
L
R
R
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Connecting to a TV Using an S-Video Input Jack
VIDEO IN
AUDIO
OUT
S-VIDEO
RCA audio cable
AUDIO IN
L
L
OUT
R
S-VIDEO IN
R
S-video cable
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 21
CONNECTIONS
Connecting to a TV Using Audio / Video Input Jacks
IN ---AUDIO---OUT
(L1)
AUDIO IN
L
L
RCA audio cable
L
R
R
R
IN ---VIDEO---OUT
VIDEO IN
RCA video cable
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Connecting to a TV without Audio / Video Input Jacks
Set channel 3 or 4
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
VHF / UHF
antenna
ANT. IN
external tuner
IN --- AUDIO---OUT
(L1)
L
L
RCA audio cable
RCA video cable
R
R
IN ---VIDEO---OUT
or
R
L
ANT. IN ANT.OUT
VIDEO OUT
AUDIO OUT
cable TV
company
RCA video cable
RCA audio cable
RF coaxial cable
RF coaxial
cable
RF coaxial cable
R
L
3
4
ANT. IN VIDEO IN AUDIO IN
CHANNEL
TO TV
RF modulator
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
RF modulator is not supplied with this unit. You need to purchase it at your local store.
The quality of picture may become poor if this unit is connected to an RF modulator.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Digital Audio Connection
Coaxial Cable Connection
Dolby Digital decoder
rear of this unit
digital audio
HDMI OUT
coaxial input jack
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
COAXIAL
Y
L
L
digital audio
coaxial cable
COAXIAL
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
AV receiver / amplifier with an HDMI input jack
HDMI IN
HDMI OUT
HDMI cable
rear of this unit
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
To set up “HDMI Audio”, refer to pages 84 and 91.
No supplied cables are used in these connections:
Please purchase the necessary cables at your local store.
Multi Channel Digital Audio Setting
To set up “Dolby Digital”, refer to pages 83 and 85 - 87.
Setting in the Setup Menu
Actual Audio Output
DTS Setting of
this unit
(refer to page 87)
Dolby Digital Setting
of this unit
(refer to page 87)
Audio Format (disc)
HDMI Out
Digital Audio Out
Stream
PCM
Dolby Digital
2 channel PCM
Dolby Digital
2 channel PCM
Dolby Digital
DTS®
OFF
ON
OFF
No output
No output
Stream
PCM
2 channel PCM
2 channel PCM
2 channel PCM
2 channel PCM
LPCM
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Note
The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an
MD or DAT deck.
By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround
sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 87).
The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length)
maybe limited by the device that is connected.
Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections
with device such as this unit, audio signals are not output from the HDMI output connector.
• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.
2 Channel Analog Audio Connection
Stereo system
AUDIO
OUT
analog audio
input jacks
rear of this unit
HDMI OUT
AUDIO IN
L
DVD/VCR
R
L
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
R
R
L
OUT
IN
R
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
RCA audio cable
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
When you turn on this unit for the first time, you need to follow these steps after you have completed all the
connections.
After you have made all the
necessary connections, press
[I/y ON/STANDBY] to turn on the
OPEN/
INPUT
CLOSE SELECT
HDMI
unit.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Turn on your TV.
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
Press the button on the TV’s remote
input channel. It may be labeled
“SOURCE”, “AV” or “SELECT” (refer to
your TV’s user manual). Or press “2”
on the TV’s remote control, then
press channel down button
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
TIME SLIP
FWD
PLAY
Initial Setting
REV
PLAY
STOP
OSD Language
SKIP
SKIP
DVD
English
Français
Español
PAUSE
VCR
Select the language for Setup display.
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Use [K / L] to select your desired
language, then press [ENTER] to set
language.
Press [ENTER] to activate “Clock
Setting”.
Initial Setting
Clock Setting
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
ENTER: Set Clock.
RETURN: Exit Initial Setting.
Proceed to step 4 in “SETTING THE
CLOCK” on page 26.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming.
Press [SETUP] and use [K L] to
select “General Setting”, then press
[ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Use [K L] to select calendar or time,
then press [ENTER].
PQRS
TUV
SAT.LINK
TIMER
SPACE
Clock Setting
PROG.
JAN / 01 / 2011 ( SAT )
12 : 00 AM
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[ENTER].
ENTER
CLEAR
RETURN
Clock Setting
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
JAN / 01 / 2011 ( SAT )
12 : 00 AM
REV
PLAY
STOP
Your setting will be activated.
SKIP
SKIP
DVD
The clock start counting when you press
[ENTER]
PAUSE
VCR
DUBBING
REC MODE REC
Press [SETUP] to exit.
REPEAT TIMER SET SEARCH ZOOM
Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.
For setting the day, year, hour and minute,
[the Number buttons] can also be used.
You can set the built-in calendar from the year 2009
up to 2059.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR THE VIDEO INPUT
You must let the unit know which video input jack you are using before making a recording.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K L] to select “General
Setting”, then press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Use [K / L] to select “Video”, then
press [ENTER].
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
Use [K / L] to select “Select Video”,
then press [ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Use [K L] to select the input jack
ENTER
type to connect, then press [ENTER].
CLEAR
RETURN
If you want to use VIDEO IN jack, select “Video
In”, then press [ENTER]
INSTANT 1.3x/0.8x
SKIP
TIME SLIP
FWD
PLAY
If you want to use S-VIDEO IN jack, select
“S-Video In”, then press [ENTER]
REV
PLAY
STOP
General Setting
Playback
SKIP
SKIP
DVD
Display
Video
Progressive
TV Aspect
Recording
Clock
HDMI
Select Vid
e
o
-
L
1
(
R
ear)
Video In
S-Video In
PAUSE
VCR
Reset All
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Press [SETUP] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K L] to select “DVD Menu”,
then press [ENTER].
TRACKING
Setup
PQRS
TUV
SAT.LINK
General Setting
Timer Programming
Title List
TIMER
SPACE
PROG.
DVD Menu
SETUP DISPLAY AUDIO
TOP MENU
Use [K L] to select “Format”, then
DISC MENU
press [ENTER].
DVD Menu
Format
Finalize
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Use [K / L] to select “Format Mode”,
then press [ENTER].
REV
PLAY
STOP
DVD Menu
SKIP
SKIP
DVD
Format
Finalize
Start
Format Mode
PAUSE
VCR
DUBBING
REC MODE REC
Use [K L] to select “Video mode” or
REPEAT TIMER SET SEARCH ZOOM
“VR mode”, then press [ENTER].
Press [SETUP] to exit.
Formatting will start.
Formatting
90%
The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.
Formatting is completed.
“100%” is indicated.
• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the “Setup” menu only. To reformat a disc
(change disc format type), refer to “Reformatting a
Disc Manually” on page 29.
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.
Insert a recordable disc.
Press [SETUP].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “DVD Menu”,
then press [ENTER].
TRACKING
PQRS
TUV
SAT.LINK
Setup
General Setting
Timer Programming
Title List
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
DVD Menu
DISC MENU
Use [K L] to select “Format”, then
press [ENTER].
e.g.) VR mode DVD-RW
ENTER
DVD Menu
CLEAR
RETURN
Format
Finalize
Disc Protect OFF
ON
INSTANT 1.3x/0.8x
TIME SLIP
FWD
Delete All Playlists
SKIP
PLAY
REV
PLAY
STOP
Use [K / L] to select “Start”, then
press [ENTER].
SKIP
SKIP
DVD
DVD Menu
PAUSE
VCR
Format
Finalize
Start
Disc Protect OFF
Delete All Playlists
ON
Format Mode
DUBBING
REC MODE REC
Selection menu will appear and prompt you to
confirm.
REPEAT TIMER SET SEARCH ZOOM
• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER]
Use [K L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
Are you sure?
Yes
No
Formatting is completed.
“100%” is indicated.
When you reformat the disc, the contents of the disc
are erased.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 28.)
This unit may not be able to reformat a disc that is
not previously formatted by this unit (e.g. DVD disc
formatted by PC or another recorder).
Formatting
100%
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.
Press [SETUP].
OPEN/
INPUT
Use [K / L] to select “DVD Menu”,
then press [ENTER].
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Use [K L] to select “Disc Protect
OFF ON”, then press [ENTER].
e.g.) VR mode DVD-RW
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
DVD Menu
Format
Finalize
SETUP DISPLAY AUDIO
TOP MENU
Disc Protect OFF
ON
Delete All Playlists
DISC MENU
ENTER
CLEAR
RETURN
Use [K / L] to select “Yes”, then press
[ENTER].
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
Protect this disc?
SKIP
SKIP
DVD
Yes
No
PAUSE
VCR
A disc will be protected.
DUBBING
REC MODE REC
This operation may take
awhile to be completed.
REPEAT TIMER SET SEARCH ZOOM
Note
To cancel the disc protect:
When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “Disc
Protect OFF ON”.
DVD Menu
Format
Finalize
Disc Protect ON
OFF
Delete All Playlists
• To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
“General Setting” menu will appear.
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
Use [K L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Use [K L] to select “Auto Finalize”,
then press [ENTER].
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press
[ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Auto Finalize
Disc Full
End of Timer Rec
ENTER
CLEAR
RETURN
Use [K / L] to select “ON”, then press
[ENTER].
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
Disc Full
ON
OFF
SKIP
SKIP
DVD
PAUSE
VCR
End of Timer Rec
ON
OFF
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Your setting will be activated.
Press [SETUP] to exit.
• This function is not available after finishing daily or
weekly program recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 31
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize discs to play back on other DVD
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of
the disc, a shorter recording period on the disc will
require a longer time period for finalization. Do not
unplug the power cord during finalization.
Use [K L] to select “DVD Menu”,
then press [ENTER].
“DVD Menu“ menu will appear.
Use [K L] to select “Finalize”, then
press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW
TRACKING
PQRS
TUV
SAT.LINK
Finalize disc?
TIMER
SPACE
PROG.
Yes
No
SETUP DISPLAY AUDIO
TOP MENU
Finalizing will start.
DISC MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Finalizing
90%
REV
PLAY
STOP
This operation may take
awhile to be completed.
SKIP
SKIP
DVD
PAUSE
VCR
Finalizing is completed.
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
• Finalizing a disc in video mode and +VR mode
automatically creates a title menu.
• After you finalize the DVD+RW, you can call up the
title list by pressing [TOP MENU], or you can call up
the title menu by pressing [DISC MENU]
Even after DVD+RW is finalized, you can still record
or edit. After you finalize DVD-RW/-R or DVD+R, you
cannot edit or record anything else on that disc.
• If you insert a DVD-RW finalized with this unit, “Undo
Finalization” will appear instead of “Finalize” at
step 3.
• To release the finalization of the DVD-RW disc, select
“Undo Finalization” at step 3.
DVD Menu
Format
Undo Finalization
Disc Protect OFF
Delete All Playlists
ON
• To undo the finalization of the DVD+RW, make an
additional recording onto the disc.
DO NOT power off during finalizing. This may result
in a malfunction.
For DVD+RW, if you have added or deleted chapters,
or made chapters hidden, you must finalize the disc
before being able to see those effects on other units.
To play back discs other than DVD+RW on other DVD
players, you will need to finalize.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Recording Mode
Restrictions on Recording
You can select a recording mode among 5 options, and
the recording time will depend on the recording mode
you select as follows.
You cannot record copy-protected program using this
unit. Copy-protected video signal is included in DVD-
videos, some satellite broadcasts, some pay-per-view
stations and some “premium” stations.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
Recording time
12cm 8cm
Video/
Sound Quality
Recording mode
XP
SP
LP
60 min 18 min
120 min 36 min
240 min 72 min
360 min 108 min
480 min 144 min
“Copy-once only” video can only be recorded to CPRM
compatible DVD-RW formatted in VR mode.
What is “CPRM”?
CPRM is a copy protection system with scramble system
regarding the recording of “copy-once” broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
make another copy of those recordings. CPRM recordings
can only be made on CPRM compatible DVD-RW formatted
in VR mode, and CPRM recordings can only be played back
on DVD players that are specifically compatible with CPRM.
SLP
• The recording times listed above are estimates and are
for reference purposes only. Actual recording times may
vary.
• The audio and video quality of content being recorded
may differ depending on the recording mode/recording
time chosen.
Note
• This unit cannot record to CD-RW or CD-R.
Making discs playable in other DVD players (Finalize)
DVD-RW/-R, DVD+RW/+R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
For DVD-RW/-R, it is necessary to finalize the disc after
recording, in order to play back the disc on other DVD
players. (Refer to pages 31 - 33.) For DVD+RW/+R, it is
recommended to finalize the disc in order to make the
disc more compatible to other DVD player. When video
and +VR mode disc are finalized, a title menu is created.
You cannot finalize discs in other DVD recorders.
record additional information using other DVD
Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR A RECORDING
Make Recording Compatible
Setting for Auto Chapter
Use this feature to make the discs recorded on other unit
recordable on this unit. When you make an additional
recording on this unit with “Make Recording Compatible”
set to “ON”, the title list is automatically converted to our
style.
You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
3) Use [K / L] to select “Auto Chapter”, then press
2) Use [K / L] to select “Recording”, then press
[ENTER].
[ENTER].
“Recording” menu will appear.
4) Use [K / L] to select a desired time option, then
press [ENTER].
3) Use [K / L] to select “Make Recording Compatible”,
then press [ENTER].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
4) Use [K / L] to select “ON” or “OFF”, then press
[ENTER].
Make Recording Compatible
ON
OFF
5) Press [SETUP] to exit.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
• The interval for auto chapter may be up to two
minutes different from the time option you set.
OFF: Prohibiting additional record to the disc that
A blank chapter may be created depending on the
remaining time of the disc.
has a title list created by other units.
5) Press [SETUP] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR A RECORDING
Setting Aspect Ratio for Video Mode
Recording
Recording Audio Select (XP)
You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
You can set aspect ratio for video mode recording.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
1) Follow step 1 to 2 on “Recording Audio Select(XP)”.
2) Use [K / L] to select “Aspect Ratio (Video mode)”,
2) Use [K / L] to select “Recording”, then press
[ENTER].
then press [ENTER].
“Recording” menu will appear.
3) Use [K / L] to select your desired setting, then press
[ENTER].
3) Use [K / L] to select “Recording Audio Select (XP)”,
then press [ENTER].
Aspect Ratio (Video mode)
Auto
4 : 3
16 : 9
4) Use [K / L] to select “PCM” or “Dolby Digital”, then
press [ENTER].
Auto (default): It will be recorded with whichever the
ratio that the program you started to record are
broadcasted with.
Recording Audio Select (XP)
PCM
Dolby Digital
: Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.
PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
4) Press [SETUP] to exit.
Records Dolby Digital audio for good quality sound.
• For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the “Aspect Ratio
(Video mode)” setting.
• For DVD+RW/+R, the image will always be recorded
in aspect ratio of 4:3.
5) Press [SETUP] to exit.
Note
“PCM” stands for Pulse Code Modulation. It changes
analog sound to digital sound without compressing
audio data.
• When the recording mode is set at other than XP, the
unit records “Dolby Digital” audio automatically even
if you selected “PCM”.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [I/y ON/STANDBY].
Turn on the TV and be sure to select the input to
Press [DVD].
OPEN/
INPUT
HDMI
CLOSE SELECT
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
Align the disc to
the disc tray guide.
DISC MENU
Press [OPEN/CLOSE A] to close the
disc tray.
ENTER
CLEAR
RETURN
It may take awhile to load
the disc completely.
INSTANT 1.3x/0.8x
SKIP
TIME SLIP
FWD
PLAY
• When inserting a brand-new DVD-RW or
DVD+RW, the unit automatically starts to
format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 34 for DVD.
REPEAT TIMER SET SEARCH ZOOM
SP
1:53
Press [INPUT SELECT ] to select the
appropriate external input position
(L1/L2) to which your external tuner
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 37
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC I] to start recording.
I” will be displayed for 5 seconds.
Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 68.)
e.g.) DVD+R/DVD-RW/-R
SP
1:53
I
Press [PAUSE F] to pause recording.
Press [PAUSE F ] or [REC I] again to restart
recording.
Wait for a moment.
90%
This operation may take
awhile to be completed.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
I
0:30
0:30
(normal recording)
1:00
8:00
7:30
• To change the recording length during one-touch
timer recording, press [REC I] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C]
Note
When you press [REC I] recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
You cannot change the recording mode during the recording pause mode.
Note for one-touch timer recording
The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the unit into the standby mode (One-touch timer recording will be canceled.).
- Using [REC I] [STOP C]
• You cannot use the pause function during one-touch timer recording.
I f DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode
and the VCR keeps the current mode.
When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to
the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel
the timer-standby mode to use the unit continuously.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Guide to Timer Programming Display
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
3
1
2
Timer Programming
JAN/ 6/11 1:00 AM L1 SP
SP (1:00)
THU JAN/06 10:00AM
Before recording, make sure
Date
Start
End
L1/L2
L1
• Connect the external tuner to either L1 or L2 and set it
to output audio/video signals when it comes to the time
you want to start recording.
JAN/06
1:00AM 2:00AM
New Program
• Do not change the external tuner’s channel while you
are recording. You cannot watch one channel and
record another at the same time.
1/1
4
5
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with an erase-protection tab.
1. Title of a Timer Program (Contains date, time, external
input, recording mode of the program)
2. Current date and time
3. Recording mode and length of the recording
4. Timer program list
5. Total number of pages and current page (2 pages maximum)
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
PQRS
TUV
SAT.LINK
Press [TIMER PROG.].
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
Use [K / L] to select “New Program”,
then press [ENTER].
DISC MENU
Timer Programming
ENTER
THU JAN/06 10:00AM
CLEAR
RETURN
Date
Start
End
L1/L2
New Program
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
1/1
SKIP
SKIP
DVD
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
• If you have not set the clock yet:
Clock Setting menu will appear instead of the timer programming list at step 1. Continue with the step 3 in
“SETTING THE CLOCK” on page 26 before setting a timer programming.
• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.
• If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in
progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are
the same, the timer recording will start without canceling the recording currently in progress. In this case, the
recording of the same channel will be made on both DVD and VCR.
You cannot make a program whose recording time exceeds 12 hours.
• Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished
operating, press [TIMER SET] to resume the timer-standby mode.
In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not
currently timer-programmed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 39
TIMER RECORDING
Refer to “Recording Mode” on page 34 for DVD or
Use [K / L] to enter the date, then
press [B].
“Recording” on page 93 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date
JAN/06
L1/L2
L1
Start
- - : - -
REC To
DVD
End
- - : - -
Mode
SP
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
2 : 00
JAN/01
Daily
SP
1 : 00
When pressing [L]
the current date, the
date will change as
Auto recording mode select (DVD only)...
MON-SAT
MON-FRI
SAT
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
e.g.) January 1st
FRI
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SUN
Auto
Auto
1 : 00
JAN/31
Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
- - : - -
Mode
SP
Press [ENTER] when all items are
entered.
SP
2 : 00
After displaying an instructive message for 10
time exceeds 12 hours.
seconds, timer program list will appear.
PressTIMER SET toTimer Standby mode.
Ensure the external source is tuned to
the correct channel.
WhenTimer set on DVD or VCR,
it is not available in the standby mode.
PressTIMER SET to cancel the Standby mode.
Use [K / L] to select an appropriate
external input (L1/L2) to which your
external tuner is connected, then
press [B].
Timer Programming
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
JAN/ 6/11 1:00 AM L1 SP
SP (1:00)
Date
JAN/06
THU JAN/06 10:00AM
Start
End
L1/L2
L1
SP
1 : 00
1:00AM 2:00AM
Your program setting is stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER PROG.] or [SETUP]
Use [K / L] to select a recording media
(“DVD” or “VCR”), then press [B].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 41.
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
1 : 00
Use [K / L] to select a recording
mode.
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
Date
JAN/06
L1/L2
L1
Start
1 : 00AM
REC To
DVD
End
2 : 00AM
Mode
SP
SP
1 : 00
CS
DR
CD
HDD
DVD
“VCR” will appear on the front panel display if VCR
timer recording have been set.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
To stop the timer recording in progress
If the timer program did not complete correctly, the
error number appears in the timer programming list.
1) Press [STOP C] on the remote control.
Confirmation message will appear.
Timer Programming
THU JAN/06 10:00AM
2) Select “Yes”, then press [ENTER].
Date
E41 JAN/06
Start
End
L1/L2
L1
1:00AM 2:00AM
New Program
• To stop the timer recording immediately, press
[STOP C] on the unit.
1/1
Checking, canceling, or correcting the timer
programming information
Each error number means:
E1-22 Recording error other E40
E37-39 than below
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
1) Press [TIMER SET].
E23-24 Unrecordable disc
2) Press [TIMER PROG.].
E25-28 Copy prohibited program
3) Check the information on the list you want to edit.
E29
E30
Disc protected
Disc full
E41
E42
E43
Power failed
No disc when recording
Timer Programming
JAN/ 6/11 1:00 AM L1 SP
E31-32 Already 99 titles
recorded
Already 49 titles
recorded
SP (1:00)
Date
JAN/06
THU JAN/06 10:00AM
Start
End
L1/L2
L1
1:00AM 2:00AM
New Program
E33
E34
E35
E36
Already 999 chapters E44
recorded
Already 254 chapters
recorded
No space for Control E45
information
Copy prohibited
program
1/1
PCA full *1
E46
It is impossible to
record additionally
on a disc recorded
by other units
4-A) To delete the timer program:
Already finalized
video format disc
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
when setting
“Make Recording
Compatible” to “OFF”.
Selection menu will appear.
3 Use [K / L] to select “Yes”, then press [ENTER].
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
4-B) To correct the timer program:
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
*1 PCA is a disc's space reserved for recording test.
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
5) Press [TIMER PROG.] to exit.
6) Press [TIMER SET] to return to the timer standby
mode.
• Press [TIMER PROG.] to check the timer recording in
progress.
When the timer recording is proceeding, that
program will be highlighted in red. In this case, you
cannot select any other program.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• During timer recording or timer standby mode ( will
appear), any operations on the unit will not be available.
To make these operations available, press [STOP C] to
stop the timer recording or [TIMER SET] to cancel timer
standby mode ( will disappear).
• If a disc is not inserted or if a inserted disc is not
recordable (finalized DVD-RW/-R, finalized DVD+RW, a
fully recorded disc, etc.), “DVD” on the front panel
display flashes and timer recording cannot be
• To cancel the timer standby mode, press [TIMER SET]
• When the starting and the ending time are the same,
“Exceeds 12 hours” appears and the program setting will
not be accepted.
performed. In some cases,
will appear momentarily
around the start point as the unit attempts to record.
Please insert a recordable disc.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
[TIMER SET] is pressed.
• The timer recording cannot be performed in DVD and
VCR at the same time. If you set 2 programming with the
same channel and time in both devices, the program
with a lower program number will be recorded.
• If a cassette tape with an erase-protection tab is not in
the cassette compartment or there is no cassette tape in
the cassette compartment, “VCR” on the front panel
display flashes and timer recording cannot be
performed. Please insert a recordable cassette tape.
• If you press [TIMER SET] and turn on the unit while
either DVD or VCR is in timer standby mode,
disappears. In this case, you cannot change the mode
between DVD and VCR. You cannot change any settings
using [SETUP] or edit discs.
• “Press TIMER SET for timer recording” will appear on the TV
screen 5 minutes before the programmed starting time.
• When all the timer recording is completed,
play back or eject the recorded disc, press
[I/y ON/STANDBY] first, then select the recorded title and
press [PLAY B], [OPEN/CLOSE A]
The Priority of Overlapped Settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled or start from the middle.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
When the starting time and the ending time for
each programs are different:
A program that has earlier start time has priority.
PROG. A
PROG. B
PROG. A
PROG. B
PROG. B
actual
actual
PROG. A
PROG. B
PROG. A
recording
recording
The first 2 minutes (at the longest) will be cut off.
The first 2 minutes (at the longest) will be cut off.
When the recording time is entirely overlapped:
PROG.A will not be recorded.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to be
recorded.
PROG. A
PROG. A
PROG. B
actual
PROG. B
actual
recording
PROG. B
PROG. A
PROG. B
recording
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of the The beginning of the PROG. B may be cut off.
subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
PROG. A
program will be displayed with errors number E40 in the
timer programming list.
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
SATELLITE LINK
You can set the unit to start recording whenever it
Select whichever the component
(DVD / VCR) you want to make a
recording to. (Refer to page 14)
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
Select the desired recording mode.
(Referto“RecordingMode”onpage34
for DVD or “Recording” on page 93 for
VCR)
Press [SAT. LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
• You must let the unit know which video input jack you
are using before making a recording.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 27.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SAT. LINK] or [TIMER SET]
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C]
Note
If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.
• You cannot set the start or the end time for the satellite link timer recording on this unit.
Recording picture will be distorted if the copy protection signal is being detected during satellite link timer
recording.
You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 44 for more
information.
When a regular timer recording and the satellite link timer recording are overlapped, those recordings are
recorded as illustrated below.
example 1
example 2
example 3
timer
recording
timer
recording
timer
recording
satellite link
satellite link
satellite link
actual
recording
actual
recording
actual
recording
The first 2 minutes (at the longest) will be cut off.
The first 2 minutes (at the longest) will be cut off.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), it is recommended to connect the DVC with the front DV IN jack
with a commercially available mini DV/Firewire cable.
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
R
L
VIDEO
OUT
AUDIO OUT
DV-OUT
L
R
external device
(camcorder, VCR etc.)
RCA
audio
cable
RCA
video
cable
RCA
video
cable
RCA
audio
cable
or
DV cable
(4-pin)
S-video
cable
S-VIDEO
IN --- AUDIO---OUT
(L1)
IN
IN ---VIDEO---OUT
L2
L3
VIDEO
L
R
DV IN
L1
L2
L3
to L1
to L2 & L3
HDMI OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO---OUT
(L1)
VIDEO OUT
Y
L
L
PB
/CB
VCR
DVD
R
R
L
OUT
IN
TRACKING
DUBBING
SELECT
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
L2
L
L3
VIDEO
R
DV IN
rear of this unit
front of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Turn on the TV and press
Before recording from an external device, refer to the
instructions for the connection on page 44.
[I/y ON/STANDBY], and be sure to
select the input of the TV to which
OPEN/
INPUT
HDMI
CLOSE SELECT
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
PQRS
TUV
SAT.LINK
TIMER
It takes awhile to load
the disc.
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
When you want to record to a
cassette tape:
DISC MENU
Press [VCR].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Select the input of the unit which the
external device is connected. (L1, L2
REV
PLAY
STOP
or DV(L3))
SKIP
SKIP
DVD
• To use the input jacks on the rear of this unit;
Select “L1 (Rear)” by using [INPUT SELECT
]
PAUSE
VCR
• To use the input jacks on the front of this unit;
Select “L2 (Front)” or “L3 (DV-IN)“ by using
DUBBING
REC MODE REC
[INPUT SELECT
]
REPEAT TIMER SET SEARCH ZOOM
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 34 for DVD or
“Recording” on page 93 for VCR.
Press [I REC] on the unit to start
recording.
Start playback on the external device
Press [STOP C] / [EJECT/STOP A/C]
on the unit to stop recording.
This operation may take
awhile to be completed.
VCR
DVD
RACKING
DUBBING
SELECT
L2
L
L3
VIDEO
R
DV IN
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV IN jack on the front of this unit, select
“L3 (DV-IN)” position by using [INPUT SELECT ] on the remote control and press [DISPLAY] to show the DV
dubbing information for the operation of your DVC.
When the DVC is
in video mode...
When the DVC is not
in camera mode...
1
1/
1
1/
1
1/
1
1/
1
-RW VR ORG
-RW VR ORG
The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
L3 (DV-IN)
AB-1234
0:12:34
Control
DV Audio
Start Rec
DVD
Stereo1
L3 (DV-IN)
AB-1234
0:12:34
5
2
SP
1:00
SP
1:00
3
4
7
6
You cannot control the DVC in VCR mode. For dubbing onto VCR, refer to page 48.
2. Indicator of active device
• When the “Control” is
highlighted, press [ENTER] to
display the item selection. Use
[K / L] to select the device you
wish to operate, then press
[ENTER] to activate.
• Select “DVD” to control this unit.
• Select “DVC” to control your DVC.
6. Product name of your DVC
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
Each icon means (Available icons
may vary depending on the DVC):
DVC is slow forwarding.
(faster than above)
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
3. Recording audio mode
• Other than the DVC is in stop
mode, the “DV Audio” can be
selected. Press [ENTER] to display
the item selection and then use
[K / L] to select the audio you
wish to output. Press [ENTER]
again to activate.
• Select “Stereo1” to dub the stereo
sound.
with after recording sound.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
• Select “Mix” to dub the stereo1
and stereo2.
4. Indicator of dubbing function
• When the unit is ready for
DVC is slow forwarding.
(faster than above)
dubbing, “Start Rec” will appear.
DVC is in recording pause
mode.
• When the unit is in dubbing,
“Pause Rec” will appear.
5. Channel position
• When you select “L3 (DV-IN)” by
using [INPUT SELECT ], “L3
(DV-IN)” will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
DVC to DVD Dubbing
Press [REC MODE] repeatedly to
select a recording mode.
Before recording from DVC, see page 44 for connection
instructions.
(Refer to “Recording Mode” on page 34 for DVD or
“Recording” on page 93 for VCR.)
Press [DISPLAY].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
With “Control” highlighted, press
[ENTER] to display the available
devices to control with the remote
control of this unit. Use [K / L] to
select “DVC”, then press [ENTER].
TRACKING
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
1/
1
1/
1
-RW VR ORG
Control
DV Audio
Start Rec
DVD
Stereo1
L3 (DV-IN)
AB-1234
0:12:34
DISC MENU
ENTER
CLEAR
RETURN
XP
1:00
INSTANT 1.3x/0.8x
TIME SLIP
Now you can operate your DVC with the remote
control of this unit.
SKIP
PLAY
REV
PLAY
STOP
FWD
SKIP
DVD
Press [PLAY B] to start playing back
the DVC, and find where you wish to
start dubbing.
Then, press [STOP C] when you come
to the desired start point.
SKIP
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Use [K / L] to select “Start Rec”, then
press [ENTER].
The dubbing will start.
To stop dubbing;
Use [K L] to select “Control”, then
press [ENTER].
Use [K L] to select “DVD”, then
press [ENTER].
Then press [STOP C].
Press [DVD] first.
Use [INPUT SELECT ] to select “L3
(DV-IN)”.
L3 (DV-IN)
AB-1234
0:00:00
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
DVC to VCR Dubbing
Repeat the steps 1 and 2 on page 47.
Before recording from DVC, refer to page 44 for connection
instructions.
This DVC to VCR dubbing is available only for audio /
video out connection and not available for S-video,
component or HDMI connection. (Refer to
Press the PLAY button on your DVC
to find where you wish to start
dubbing. Then, press the PAUSE
button on the DV camcorder when
you come to the desired start point.
“Information on VCR Functions” on page 93).
DISC MENU
TOP MENU
Press [REC I] to start recording.
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Press the PLAY button or the PAUSE
button on your DVC to resume the
playback.
The dubbing will start.
To pause the recording:
Press [PAUSE F] once.
I” will flash.
To resume recording:
[REC I] or press [PAUSE F] again.
I” will reappear.
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
Press [VCR] first.
To stop recording, press [STOP C].
Note for DV dubbing
If you press [PAUSE F] at step 5 in “DVC to DVD Dubbing” on page 47, the tape will rewind to the point a few
seconds preceding the paused point. When you press [ENTER] at step 6 in “DVC to DVD Dubbing” on page 47, then,
it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
Do not connect more than 1 DVC.
The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will
flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 46.
You cannot dub from DVC during timer standby mode.
You cannot change the output mode during DVC to VCR dubbing. If you want to switch to the DVD mode, stop
the VCR first.
During DVC to VCR dubbing, you cannot change channels while paused.
• When output is in DVD mode while playing back a DVD using L3(DV-IN), you cannot switch to the VCR mode.
If you are using anything other than L3(DV-IN) to playback DVD, you can switch to the VCR mode, but cannot
select L3(DV-IN) channel. (You can select L3(DV-IN)) after switching to the DVD mode during VCR playback.)
• During timer standby of either component, you cannot select L3(DV-IN) even on the component which is not in
timer standby.
• Date / time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark
of SONY). It enables digital dubbing between DV devices with little degradation.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/VCR DUBBING
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
“General Setting” menu will appear.
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or the cassette tape is not copy protected.
Before starting this function, prepare for the recording on
theDVD-RW/-Rorthecassettetape. Refertopage34and93.
Use [K L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
• Insert a recordable disc and a cassette tape with an
erase-protection tab.
Note for recording to a cassette tape:
• The cassette tape's erase-protection tab is intact.
• The remaining time of the cassette tape is long enough.
Use [K / L] to select “Dubbing
Mode”, then press [ENTER].
Selection menu will appear.
Note for recording to a disc:
• Make sure that the disc is recordable. Refer to page 9.
Instructions continue on the next page.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/VCR DUBBING
Use [K / L] to select “DVD VCR”,
then press [ENTER].
Use [K / L] to select “VCR DVD”,
then press [ENTER].
Dubbing Mode
Dubbing Mode
VCR
DVD
DVD
VCR
VCR
DVD
DVD
VCR
Press [SETUP] to exit.
Press [DVD].
Press [SETUP] to exit.
Press [VCR].
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
Press [VCR], then press [REC MODE]
repeatedly to select the desired
recording mode.
Press [DVD], then press [REC MODE]
repeatedly to select the desired
recording mode.
Press [DUBBING].
DVD to VCR duplication will start.
Press [DUBBING].
VCR to DVD duplication will start.
Press [STOP C] to stop the recording.
Press [STOP C] to stop the recording.
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press
[TOP MENU] first then press [ENTER] twice.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
When “L3 (DV-IN)“ is selected as input, dubbing cannot be performed. Dubbing can be performed with either L1
or L2 inputs.
For CD to VCR duplication:
This function is available on Audio CD, not MP3, WMA or JPEG files.
For DVD to VCR duplication:
• The recording mode for VCR cannot be displayed at step 7 when using HDMI / Component / S-Video connection.
To display the VCR recording mode on the screen, the unit must be connected by the VIDEO OUT jack and the TV’s
input select should be set to the appropriate external input channel.
For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function.
This is not a malfunction. Be advised to playback the cassette tape until the picture is stabilized, then set the
starting point where you wish to start recording, and start VCR to DVD duplication.
• The playback sound mode is followed by the setting of VCR playback sound mode on page 95. Set the playback
sound mode to which you wish to record to the DVD.
This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will appear on the front panel display during dubbing.
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
The contents of DVD are generally divided into titles, and the titles are subdivided into chapters.
Audio CDs are divided into tracks.
Data disc contains MP3/WMA/JPEG are divided into folders, and the folders are subdivided into files.
DVD
Title:
Divided contents of a DVD video. Roughly
corresponds to a story title in short stories.
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Chapter: Divided contents of a title. This corresponds to
a chapter in a story.
Track:
Divided contents of an audio CD.
Folder:
Divided contents of a MP3/WMA/JPEG data
disc. Consists of number of files.
Track 1 Track 2 Track 3
Each title, chapter, or track, folder or file is assigned a
number, which is called “title number”, “chapter number”,
“track number”, “folder number” or “file number”
respectively.
Track 4 Track 5
Some discs may not have these numbers.
MP3/WMA/JPEG
file 4
file 1 file 2
file 3
file 5
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 51
BASIC PLAYBACK
Direct Playback
Press [I/y ON/STANDBY].
Turn on the TV and be sure to select the input to
which the unit is connected.
OPEN/
INPUT
HDMI
CLOSE SELECT
Press [DVD].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
TRACKING
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
Align the disc to
DISC MENU
the disc tray guide.
ENTER
Press [OPEN/CLOSE A] to close the
CLEAR
RETURN
disc tray.
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
It may take awhile to load
the disc completely.
REV
PLAY
STOP
SKIP
SKIP
DVD
Press [PLAY B] to start playback.
If you are playing back a DVD-video, a menu
may appear.
PAUSE
VCR
Refer to “Using the Title/Disc Menu” on page 55.
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 56.
Some discs may start playback automatically.
Playback will stop when you change the output
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
Press [OPEN/CLOSE A] to open the
disc tray and insert your disc with its
label facing up.
OPEN/
INPUT
HDMI
CLOSE SELECT
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
Align the disc to
PQRS
TUV
SAT.LINK
the disc tray guide.
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
Press [OPEN/CLOSE A] to close the
disc tray.
DISC MENU
It may take awhile to load
the disc completely.
ENTER
CLEAR
RETURN
Press [TOP MENU].
Title list will appear.
Press [DISC MENU] to switch Original/Playlist if
necessary.
• To exit the title list, press [STOP C]
• To resume the title list, press [TOP MENU]
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
Use [K L { B] to select a desired
PAUSE
VCR
title, then press [ENTER].
DUBBING
REC MODE REC
e.g.) VR mode DVD-RW original
REPEAT TIMER SET SEARCH ZOOM
Title List
ORG
JAN/ 6/11 1:00AM L1 SP
1:00AM (0:12:00)
JAN/ 6/11
L1 SP
1
2
3
6
4
5
1 / 6
Use [K / L] to select “Play From
Start”, then press [ENTER].
Press [I/y ON/STANDBY].
Turn on the TV and be sure to select the input to
which the unit is connected.
Play From Start
Edit
Title Delete
Add To Playlist
Press [DVD].
Note
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 56.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
You can also start playback by pressing [PLAY B]
instead of [ENTER] at step 5 on this page.
• At step 4, you can press [SKIP G], or press [B]
when the title on the lower right of the title list is
highlighted to display the next page, and press
[SKIP H], or press [{] when the title on the upper
left of the title list is highlighted to display the
previous page.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3/WMA/JPEG Files
Follow steps 1 to 2 in “Direct
Playback” on page 52.
Press [OPEN/CLOSE A] to close the
OPEN/
INPUT
disc tray.
CLOSE SELECT
HDMI
It may take awhile to load
the disc completely.
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
When an audio CD is inserted, track list will
appear.
When you insert a CD-RW/-R mixed with MP3/
WMA/JPEG files, the playback media selection
screen will be displayed.
For MP3/WMA, select “Music”, for JPEG, select
“Photo”. When a CD-RW/-R with MP3/WMA/
JPEG files is inserted, file list will appear.
• To exit the file list, press [STOP C]
• To resume the file list, press [TOP MENU]
[DISC MENU] to call up the playback
media selection screen in stop mode.
TRACKING
PQRS
TUV
SAT.LINK
TIMER
SPACE
PROG.
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
ENTER
Use [K / L] to select a desired folder
or track/file, then press [ENTER].
e.g.) JPEG file list
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
File List
DISC NAME
REV
PLAY
STOP
A
B
JPEG file1
JPEG file2
JPEG file3
JPEG file4
JPEG file5
JPEG file6
SKIP
SKIP
DVD
PAUSE
VCR
1/ 2
DUBBING
REC MODE REC
When selecting track/file:
REPEAT TIMER SET SEARCH ZOOM
Playback will start.
When selecting folder:
The files in the folder will appear.
[K / L] to select the file or folder you want to play
back, then press [ENTER]
[PLAY B] [ENTER] [B] to move to any lower
[s] [RETURN] to move back to the previous
hierarchy.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Using the Title/Disc Menu
Hints for audio CD tracks and MP3 / WMA / JPEG files:
• Folders are shown by
• Audio CD tracks are shown by
DVD may contain a title list, which describes the contents
of the disc, or a disc menu, which guides you through the
available functions in the disc.
3
• MP3 files are shown by
W
• WMA files are shown by
• JPEG files are shown by
Press [DVD] first.
• The system can recognize up to 255 folders and, up to
99 tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “…”.
1)Press [TOP MENU] or [DISC MENU] to call up the
title list or disc menu.
2)Use [K / L / { / B] to make a selection, and then
press [ENTER] to enable your selection.
If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
3)Press [STOP C] to exit the disc menu.
<MP3 / WMA>
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz
: 112 kbps - 320 kbps (MP3)
48 kbps - 192 kbps (WMA)
You can select a numbered menu with
[the Number buttons] also.
Menus vary among discs. Refer to the information
accompanying the disc for details.
• [DISC MENU] or [TOP MENU] will not always be
effective for all DVDs.
<JPEG>
• Upper limit
• Lower limit
: 6,300 x 5,100 dots
: 32 x 32 dots
• File size of image maximum : 12 MB
Press [DVD] first.
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
• Files whose extension is other than “.mp3(MP3)”,
“.wma(WMA)” or “.jpg / .jpeg(JPEG)” will not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
• The JPEG pictures can also rotate by using [s / B].
F
This DVD Video Recorder requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. There are many different types
of recordable disc formats (including CD-R containing
MP3/WMA files). Not all recordable discs will operate or
produce optimal playback quality. The technical criteria
set forth in this owner's manual are meant only as a
guide. Use of CD-RW for MP3/WMA files is not
recommended.
2)Press [PLAY B] to return to the normal playback.
For DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 88)
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Toshiba cannot and does not grant such
permission.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During Playback
Resume Playback
You can play back from where you stopped playing back
You can skip TV commercials to enjoy the recorded
programs without interrupting.
Press [DVD] first.
Press [DVD] first.
1)During playback, press [STOP C].
The resume message will appear.
During playback, press [INSTANT SKIP].
Normal playback will start at 30 seconds ahead from
where you press [INSTANT SKIP]
Resume ON
Every time you press [INSTANT SKIP], the searching
2)Press [PLAY B].
point will be extended by 30 seconds ahead.
In a few seconds, playback will resume from the point
the same point even if you turn the unit into the
standby mode.
You can press [INSTANT SKIP] up to 6 times (180 seconds).
e.g.) Press [INSTANT SKIP] once.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
For MP3/WMA/JPEG files, playback will resume from
the beginning of the file at which playback was
stopped.
Instant Skip 30sec.
Fast Forward / Fast Reverse Playback
(forwarding 30 seconds)
Press [DVD] first.
1)During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E]
approximate speed will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 / WMA files) is not possible.
B
FWD
FWD
FWD
FWD
FWD
FWD
Playback will return to the normal playback.
normal
speed
REV
REV
REV
REV
REV
REV
40x
20x
5x
2x
20x
40x
playback
For audio CD or MP3/WMA files, approximate speed is
fixed at 8x with sound.
2)Press [PLAY B] to return to the normal playback.
Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Rapid Playback
Slow Forward / Slow Reverse Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
Press [DVD] first.
1)During playback, press [PAUSE F]. Then press
[FWD D] or [REV E].
Every time you press [FWD D] or [REV E]
approximate speed will be changed as follows. (The
sound will remain muted.)
Press [DVD] first.
1)During playback, press [1.3X / 0.8X PLAY].
FWD
FWD
FWD
FWD
FWD
FWD
REV
REV
REV
REV
REV
REV
Press [1.3X / 0.8X PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B x0.8 :
B x1.3:
B :
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
2)Press [PLAY B] to return to the normal playback.
Press [1.3X / 0.8X PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
• Forward/reverse speed will be indicated with icons
Press [1.3X / 0.8X PLAY] thrice to play back in
normal speed.
No effects.
forward (approx. speed)
1/16x:
1/8x:
2)Press [PLAY B] to return to the normal playback.
1/3x:
reverse (approx. speed)
1/16x:
1/8x:
1/4x:
Audio (language) setting cannot be changed while
using this mode.
This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.
Step by Step Playback
Press [DVD] first.
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP i ] with the sound muted.
To play back step by step backward:
[SKIP j ] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [SKIP j ] / [SKIP i ] to reverse/
advance continuously.
3)Press [PLAY B] to return to the normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 57
SPECIAL PLAYBACK
Marker Setting
Press [DVD] first.
1)During playback, press [DISPLAY] or [ZOOM].
• If you press [ZOOM], skip to step 3.
This feature allows you to assign a specific point on a disc
to be called back later.
Press [DVD] first.
1)During playback, press [DISPLAY] to bring up the
display menu.
2)Use [{ / B] to select
menu.
If the display menu is already shown, skip to step 2.
e.g.) DVD-video
2)Use [{ / B] to select
to display the marker list.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired zoom factor to zoom,
then press [ENTER].
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
1
2
3
4
5
6
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
The title (track) number and the time will be displayed.
Zoom area will be displayed.
4)To return to the marker:
4)Use [K / L / { / B] to select a desired zoom
position, then press [ENTER].
Use [K / L] to select the desired marker number
then press [ENTER].
Note
To clear a marker, select the marker number to be
cleared, then press [CLEAR]
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning the unit into the standby mode
– Recording on a recordable disc
• You can mark up to 6 points.
Zoom playback will start.
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
To exit the zoom menu, press [RETURN] repeatedly.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [ENTER] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Chasing Playback during Recording
You can play back the already recorded part of the
currently recording program without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.
Using [TIME SLIP] ...
With [TIME SLIP], even if you leave your couch while
you are watching TV through this unit, you can come
back and watch rest of the program from right where
you left at any convenient time with just one button.
Please make sure to put VR mode DVD-RW disc, and set
the recording mode to LP, EP or SLP.
1)During recording, press [PLAY B].
Playback will start from the beginning of the program
that you are currently recording.
1)While viewing a TV broadcast via this unit, press
[TIME SLIP].
Screen for the current playback:
This unit start to record the TV broadcast.
2)Press [TIME SLIP] again.
6/
6
1/
1
0:01:00 / 1:23:45
RW VR ORG
-
Playback will start from the point at which you press
[TIME SLIP] first while recording continues.
• While viewing the recorded content, you can pause
and resume the playback by pressing [TIME SLIP]
3)Press [STOP C] once to stop playback.
To stop recording, press [STOP C] again.
LP
1:01
To cancel the resume, press [STOP C] again.
If you play back the fast forward playback and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to
the normal playback.
• Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
The 2x fast forward playback is not available.
• [REC I] is not available during this function.
You must cancel this function first by pressing
[STOP C] once. Then you can use [REC I] to use
OTR (one-touch timer recording) function or change
recording time for the OTR.
2)Press [STOP C] once to stop playback.
The resume message will appear.
Screen for the current recording:
6
1
1:23:45
RW VR ORG
-
L1 (Rear)
“Wait for a moment.” will be displayed on the screen
if you press [PLAY B] before 1 minute of recording.
• This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
Resume ON
LP
1:01
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 59
SPECIAL PLAYBACK
Simultaneous Playback and Recording
C] once to stop playback.
The resume message will appear.
Screen for the current recording:
You can also play back a recorded title during current
recording or the timer recording on the same disc.
1)During recording, press [DISPLAY].
Screen for the current recording:
3
1
1:30:25
RW VR ORG
-
L1 (Rear)
3
1
1:23:45
RW VR ORG
-
L1 (Rear)
Resume ON
LP
1:01
2)Select
{ / B], then press [ENTER].
To stop recording, press [STOP C] again.
To cancel the resume, press [STOP C] again.
The title number next to
will be highlighted.
Title:
Note
Enter a desired title number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Playback image may freeze momentarily using this
function.
However, this does not affect the recording.
• The 2x fast forward playback is not available.
Selected title playback will start.
This function is available only when you are
recording on a DVD-RW in VR mode, with the
recording mode LP, EP or SLP.
Chapter:
To move to
for chapter, press [B].
Enter a desired chapter number to search using
[K / L] or [the Number buttons], then press
[ENTER].
Only the titles (chapters) in the original can be
selected.
You cannot select titles from the title list.
• When you stop the playback after the timer
recording is completed, the unit will be switched to
the timer standby mode if another program has been
set (refer to “Hints for Timer Recording” on page 42).
Selected chapter playback will start.
If you play back the currently recording program and the
playback reaches the scene recorded 1 minute before,
the forwarding playback will automatically return to the
normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title/Chapter Search
Using [SKIP j ] / [SKIP i ]
Press [DVD] first.
Using [SKIP j ] / [SKIP i ]
Press [DVD] first.
1)During playback, press [SKIP i] to skip the
current track/file and move to the next.
The track/file will move forward one at a time.
1)During playback, press [SKIP i ] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
To go back to the beginning of the current track/file,
press [SKIP j ]
(For JPEG files, press it once to go to the previous file.)
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
Press it twice in quick successions to go to the previous
track/file. The track/file will move backward one at a
time.
chapter, press [SKIP j ]
Press it twice in quick successions to go to the previous
title or chapter. The title or chapter will move
backward one title at a time.
Using [DISPLAY]
Press [DVD] first.
Using [DISPLAY]
Press [DVD] first.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
e.g.) DVD-video
2)Use [{ / B] to select
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
CD
e.g.) MP3 files
The number next to
3)Title:
will be highlighted.
1/
5
0:00:15
MP3
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [ENTER].
Title search will start.
The number next to
will be highlighted.
Chapter:
Press [B] to move to the number next to
for
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[ENTER].
chapter.
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press
[ENTER].
After the search, playback will start automatically.
After the search, playback will start automatically.
Note
During CD playback, you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
Note
In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total time
of the title
total number
of chapters
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 61
SEARCH
Press [DVD] first.
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2)Use [{ / B] to select
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B]
When time search is not available,
counter are not displayed.
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [ENTER].
After the search, playback will start automatically.
Time search is available only in the same track, file or
title.
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Repeat Playback
• Point B for the repeat A-B playback should be set
within the same title or track of point A.
Available repeat function may vary depending the discs.
Press [DVD] first.
To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
You cannot select “Group” during the random
playback of MP3/WMA/JPEG files.
Chapter/Track repeat will be canceled whenever a
Chapter/Track is skipped forward or backward.
During the A-B repeat, if you reaches the point A
with any reverse playback, the reverse playback will
be canceled and the A-B repeat playback resumes
from point A.
1)During playback, press [DISPLAY] or [REPEAT] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [REPEAT], skip to step 3.
2)Use [{ / B] to select
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Random Playback
3)Use [K / L] to select a desired option to repeat,
then press [ENTER].
The selected repeat playback will start.
You can play back a disc randomly instead of playing
back in the original order.
Press [DVD] first.
e.g.) DVD-video
OFF
Title
1)Press [SETUP] in stop mode.
Chapter
A - B
2)Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
e.g.) audio CD
For MP3/WMA, use [K / L] to select “Music”, then press
[ENTER]
OFF
Track
All
For JPEG, use [K / L] to select “Photo”, then press
[ENTER]
A - B
3)Use [K / L] to select “Random Play”, then press
[ENTER].
Random playback will start.
e.g.) MP3/WMA/JPEG files
OFF
Track
All
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
Group
Random
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
display menu.
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER]
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Program Playback
You can program the disc to play back in your desired
order.
You can select the display time between 5 seconds and
10 seconds.
Press [DVD] first.
Press [DVD] first.
1)Press [SETUP] in stop mode.
1)Follow steps 1 and 2 in “Program Playback” on the
left.
2)Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
2)Use [K / L] to select “Photo”, then press [ENTER].
3)Use [K / L] to select “Slide Show”, then press
[ENTER].
3)Use [K / L] to select “Program Play”, then press
[ENTER].
4)Use [K / L] to select the display time, then press
[ENTER].
4)Use [K / L] to select a desired track, then press
[ENTER] or [B].
5)Press [SETUP] to exit.
DISC Playback Mode
Program Play
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
• Large-size JPEG files take a few moments to be
displayed.
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
DISC Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:31:07
Program playback will start.
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
You may also select a desired track using [the
Number buttons] at step 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in one or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages during playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back audio CD, you can switch “L/R”(stereo),
“L”(left) or “R”(right).
Press [DVD] first.
Press [DVD] first.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY] or [AUDIO ] to
bring up the display menu.
If the display menu is already shown, skip to step 2.
• If you press [AUDIO ], skip to step 3.
2)Use [{ / B] to select
e.g.) DVD-video
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
menu.
to display the selection
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [ENTER].
3)Use [K / L] to select a desired subtitle language,
• Audio soundtrack will switch.
e.g.) DVD-video
then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
1.English
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 2ch English
2.Dolby Digital 5.1ch English
Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.
If the title contains both main and sub audio, you can
further select “L“ (main), “R“ (sub), “L/R“ (mixed of
main and sub).
• Some discs will only allow you to change the subtitle
[DISC MENU] or
[TOP MENU] to display the disc menu.
For audio CD
Audio channel will switch.
e.g.) audio CD
If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 100.
1/
5
0:00:15 / 0:05:00
CD
1. L/R
2. L
3. R
Note
Some discs will only allow you to change the
soundtrack from the disc menu. Press [DISC MENU]
or [TOP MENU] to display the disc menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
Press [DVD] first.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
Press [DVD] first.
1)During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
menu.
e.g.) DVD-video
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Angle icon appears when a switching camera angle is available.
Angle will switch each time you press [ENTER].
3)Use [K / L
then press [ENTER].
e.g.) DVD-video
• Angle icon does not appear on the TV screen if you
set “Angle Icon” to “OFF” in “Playback” menu.
(Refer to page 88)
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Select “OFF” if sound is distorted.
• The setting will be kept when the unit is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Adjusting Black Level
Press [DVD] first.
1)During playback, press [DISPLAY].
You can adjust the black level to control the brightness
of the picture in order to get a better picture.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
menu.
to display the selection
e.g.) DVD-video
2)Use [{ / B] to select
menu.
to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select “Noise Reduction”, then press
[ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level OFF
3)Use [K / L] to select “Black Level”, then press
[ENTER].
4)Use [K / L] to select a desired option, then press
[ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Noise Reduction OFF
Black Level OFF
OFF
Type 1
Type 2
4)Use [K / L] to select “OFF” or “ON”, then press
[ENTER].
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
Your setting will be activated.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
(“Type 2” is more effective.)
OFF
ON
When playing back discs with a few noises such as
DVD-video, select “OFF”.
OFF : Shows the original picture as recorded.
ON
: Make the darker parts of the picture more
visible.
Note
You can adjust black level setting only during
playback.
The setting will be kept even when the unit is turned
off.
The default setting is “ON”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 67
INFORMATION ON DISC EDITING
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
Edit the recorded disc
You will find editing discs is easy. This unit offers
convenient edit functions which are possible only with
DVD-RW/-R and DVD+RW/+R.
You can edit the following from a title list.
• Assigning a name to a title
• Dividing a title
Press [TOP MENU].
4
5
6
Title List
ORG
JAN/ 6/11 1:00AM L1 LP
12:00AM (2:00:00) JAN/ 6/11
L1 LP
1
2
3
6
• Combining titles
• Adding titles to a playlist
• Erasing all playlist
4
5
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
1 / 2
3
2 1
3
(Possible editing functions depend on the recording
format and editing method.)
Edit
ORG
Original and playlist (VR mode)
For VR mode DVD-RW, you can edit the recordings in
playlist without changing the original recordings. Playlist
does not take up much disc space. After you make a
recording to VR mode DVD-RW, a playlist will be created
automatically.
Scene Delete
Edit Title Name
Chapter Mark
Protect
2
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist
which refer to the actual content and the edited version.
JAN/ 6/11 11:00PM L1 LP
0 : 00 : 59
11 10
9
8
7
Original content refers to what’s actually recorded on
the VR mode DVD-RW.
1. Title list: List of the titles recorded on the disc, and
their information.
Playlist content refers to the edited version of the VR
mode DVD-RW; how the original content is to be played
back.
For DVD+RW/+R, empty title always appears at the
last of the title list.
Finalizing a disc
2. The protect icon: Appears when the title has been
• This will allow a disc that is recorded on this unit to be
played back on other DVD player — without finalization
it will not be playable on other DVD player.
• After finalizing a DVD-RW/-R or DVD+R, you cannot edit
any information that is on that disc.
protected. (Original titles only)
3. Arrow: Indicating there is a previous / next page.
4. Title Indicates a type of the displayed title
ORG
: VR (Original)
: VR (Playlist)
5. Title name
: +VR mode
: Video mode
+VR
• If you have recorded in DVD+RW, then editing is still
permitted after finalizing.
PL
Video
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and criminal liability.
6. Title information: Displays various information on
the selected title.
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time and the recording mode are
displayed here.
9. Progress bar: Indicating the progress of the playback.
The vertical lines in the bar indicates chapter marks,
L” sliding on the bar indicates current point of
playback displayed in the preview window.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [RETURN] to exit the title list.
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
Notes for deleting titles
After the disc is fully recorded:
DVD-RW/DVD+RW
DVD-R/DVD+R
• When a title is deleted from • When the last title is deleted from
• When a title is deleted from
DVD-R and DVD+R, the
recordable space will NOT
be increased.
DVD-RW in VR mode, the
recordable disc space will
be increased.
DVD-RW in video mode or DVD+RW, the
recordable space will be increased.
The Full-Recorded disc
The Full-Recorded disc
The Full-Recorded disc
Delete!
Delete!
Delete!
Delete!
Deleted titles
cannot create
the space.
You cannot
record a
new title.
You cannot
record a
new title.
Note
• If you delete the title in DVD+RW, deleted title will be displayed as “Empty”.
• You cannot overwrite on the “Empty”.
For DVD+RW, if “Empty” appears right next to the other “Empty”, those “Empty” combines into one.
Title List
Title List
+VR
+VR
JAN/ 6/11 7:00AM L1 SLP
EMPTY TITLE
7:00AM (2:00:00)
JAN/ 6/11
SLP
1
2
3
6
1
4
2
3
1Delete the
title No.5
4
5
Empty
Empty
Empty
1 / 1
1 / 1
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 69
DELETING TITLES
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Be sure to read “Notes for deleting titles” on page 69 before
you delete the title.
Press [DVD].
In stop mode, press [TOP MENU].
Title list, original or playlist will appear.
• For VR mode DVD-RW, press [DISC MENU] to
switch between “Original” and “Playlist”.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
OPEN/
INPUT
CLOSE SELECT
HDMI
Title List
ORG
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
JAN/ 6/11 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 6/11
L1 LP
1
2
3
6
TRACKING
SAT.LINK
4
5
PQRS
TUV
TIMER
PROG.
SPACE
1 / 2
SETUP DISPLAY AUDIO
TOP MENU
Use [K / L] to select “Title Delete”,
then press [ENTER].
DISC MENU
Play From Start
Edit
Title Delete
Add To Playlist
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Use [K L] to select “Yes”, then press
[ENTER].
REV
PLAY
STOP
Delete this title?
SKIP
SKIP
DVD
Yes
No
PAUSE
VCR
After that, “Are you sure?” will appear, select
“Yes” and then press [ENTER]
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
Writing to Disc
90%
This operation may take
awhile to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Playlist
Follow the step 1 in “DELETING
TITLES” on page 70 to display the
original.
wish.
You can add up to 99 titles to a playlist (as long as
the total number of the playlist does not exceed 999
chapters).
Use [K Ls B] to select the
desired title, then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K L] to select “Add To
Playlist”, then press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
SAT.LINK
Play From Start
Edit
Title Delete
Add To Playlist
PQRS
TUV
TIMER
PROG.
SPACE
Use [K / L] to select “Yes”, then press
[ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Create a Playlist ?
Yes
No
ENTER
CLEAR
RETURN
The title is added to playlist.
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
REV
PLAY
STOP
This operation may take
awhile to be completed.
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
• When a playlist contains 99 titles or more, or 999
chapters or more, “Add to Playlist” cannot be
selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Erasing All Playlist
Playlist
Press [DVD].
Press [SETUP].
Main menu will appear.
Use [K / L] to select “DVD Menu”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “Delete All
Playlists”, then press [ENTER].
TRACKING
SAT.LINK
PQRS
TUV
DVD Menu
Format
Finalize
TIMER
PROG.
SPACE
Disc Protect OFF
ON
Delete All Playlists
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
ENTER
Use [K / L] to select “Yes”, then press
CLEAR
RETURN
[ENTER].
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Delete entire playlist?
REV
PLAY
STOP
Yes
No
SKIP
SKIP
DVD
“Are you sure?” will appear.
Use [K / L] to select “Yes” and then press
[ENTER].
PAUSE
VCR
DUBBING
REC MODE REC
DVD Menu
Format
Finalize
REPEAT TIMER SET SEARCH ZOOM
Disc Protect OF
Delete All Playl
Areyousure?
Yes
No
Playlist is deleted.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Deleting a playlist will not increase the available
recording time on the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put a name on the title and change it from this
menu.
Use [K L] to select “Edit Title
Name”, then press [ENTER].
SETUP DISPLAY AUDIO
Edit
ORG
DISC MENU
TOP MENU
Scene Delete
1
Edit Title Name
Chapter Mark
Protect
ENTER
CLEAR
RETURN
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 74.
SKIP
SKIP
DVD
Edit - Edit Title Name
PAUSE
ORG
VCR
A
a
B
b
2
!
C
c
3
?
1
DUBBING
REC MODE REC
1
@
REPEAT TIMER SET SEARCH ZOOM
M
1 : 25 : 47
area for entering title names
When you finish entering a title name, press
[ENTER]
Press [DVD].
In stop mode, press [TOP MENU].
Use [K / L] to select “Yes”, then press
Title list, original or playlist will appear.
[ENTER].
• For VR mode DVD-RW, press [DISC MENU] to
switch between “Original” and “Playlist”.
Edit - Edit Title Name
ORG
Yes
1
Use [K / L/s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
No
Title List
ORG
MY FAVORITE
JAN/ 6/11 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 6/11
L1 LP
1 : 25 : 47
1
2
3
6
The name you entered will be activated for the title.
4
5
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
1 / 2
This operation may take
awhile to be completed.
Use [K / L] to select “Edit”, then press
[ENTER].
Play From Start
Edit
Title Delete
Add To Playlist
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
1)Use [K / L] to select a desired character set, then
press [ENTER].
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
OPEN/
INPUT
CLOSE SELECT
HDMI
Select
ABC
abc
123
@ ! ?
Press
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
<space>
<space>
<space>
0
TRACKING
SAT.LINK
! ”# $ % & ’( )
+ , - . / : ; < = >
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
PQRS
TUV
–
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
TIMER
PROG.
SPACE
–
–
–
–
–
–
–
SETUP DISPLAY AUDIO
TOP MENU
GHI
ghi
DISC MENU
JKL
jkl
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
SKIP
TIME SLIP
FWD
PLAY
wxyz
REV
PLAY
STOP
SKIP
SKIP
DVD
*1 Press
, character set will be changed to the “ @!? ”
to to go back to
mode automatically. Press
the previous character set.
PAUSE
VCR
• To delete letters, press [CLEAR] repeatedly.
DUBBING
REC MODE REC
Press and hold [CLEAR] to delete all letters.
REPEAT TIMER SET SEARCH ZOOM
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
Follow steps 1 to 3 in “Putting Names
on Titles” on page 73 to display “Edit”
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Submenu will appear.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [SKIP H / G],
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the point where
you will create a new chapter mark.
Or, use [SKIP H / G] to find a
chapter mark that you wish to delete.
TRACKING
SAT.LINK
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
TOP MENU
Use [K L] to select “Add” or
“Delete”, then press [ENTER].
e.g.) VR mode DVD-RW original
DISC MENU
Edit - Chapter Mark
ORG
ENTER
Add
1
Delete
CLEAR
RETURN
Chapter
2 / 3
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
SKIP
SKIP
DVD
PAUSE
VCR
Use [K L] to select “Yes”, then press
[ENTER].
DUBBING
REC MODE REC
If you select “Add” at step 4, a new chapter mark
will be added, and if you select “Delete” at step
4, the chapter mark will be deleted.
REPEAT TIMER SET SEARCH ZOOM
e.g.) Add
Edit - Chapter Mark - Add
ORG
Yes
1
No
Chapter
2 / 3
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
A new chapter mark will be added.
Press [RETURN].
• Maximum numbers of chapter for each DVD:
VR mode DVD : 999 chapters per entire original
and playlist
Press [RETURN] again and then
[RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
+VR mode DVD : 254 chapters per disc, 99 chapters
per title
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
This operation may take
awhile to be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
Use [K / L/s / B] to select a desired
title, then press [ENTER].
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Title List
+VR
JAN/ 6/11 1:00AM L1 LP
1:00AM (2:00:00)
JAN/ 6/11
L1 LP
1
2
3
6
OPEN/
INPUT
CLOSE SELECT
HDMI
4
5
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
1 / 2
TRACKING
SAT.LINK
Use [K L] to select “Edit”, then
press [ENTER].
PQRS
TUV
TIMER
PROG.
SPACE
Play From Start
Edit
Title Delete
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Use [K / L] to select “Hide Chapter”,
then press [ENTER].
ENTER
Submenu will appear.
CLEAR
RETURN
Use [SKIP H] or [SKIP G] to decide
the chapter to be hidden.
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
Use [K L] to select “Hidden”, then
press [ENTER].
PAUSE
VCR
Edit - Hide Chapter
+VR
DUBBING
REC MODE REC
Visible
1
Hidden
REPEAT TIMER SET SEARCH ZOOM
Chapter 2 / 3 Hidden
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
Press [DVD].
In stop mode, press [TOP MENU].
Title list will appear.
After this operation is completed,
press [RETURN] thrice to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible”, then press [ENTER]
at the step 6 above.
Title List
+VR
JAN/ 6/11 1:00AM L1 LP
--:-- (2:00:00)
Hidden
---/--/--
2
LP
1
4
3
Data will be written onto the disc momentarily.
Empty
1 / 1
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting a Part of a Title
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 73 to display
You can delete a specific part of a title.
Even when parts of title are deleted from the playlist, the
original title will remain as it is.
Use [K / L] to select “Scene Delete”,
then press [ENTER].
e.g.) VR mode DVD-RW playlist.
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Edit
PL
TRACKING
SAT.LINK
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
PQRS
TUV
TIMER
PROG.
SPACE
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Instructions continue on the next page.
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Note
When a scene is deleted from an original, the playlist
related to the original will be deleted.
You cannot select “Scene Delete” if the number of
chapter marks in the original or playlist is more than
999. (Depends on the content, there is a case that
you cannot select “Scene Delete” before the number
of chapter marks reaches 999.)
The recordable disc space will not increase even after
deleting a part of a title on the playlist.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Use [SKIP H / G],
Use [K L] to select “Delete” then
press [ENTER].
[REV E], [FWD D], [PLAY B] and
[PAUSE F] to find the start point,
then press [ENTER].
Edit - Scene Delete
PL
Start
1
End
Edit - Scene Delete
PL
Preview
Delete
Start
1
End
Preview
Delete
JAN/ 6/11 1:00AM L1 LP
1 : 47 : 00
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
Use [K / L] to select “Yes” then press
[ENTER].
Then use [SKIP H / G],
“Are you sure?” will appear. Select “Yes” using
[REV E], [FWD D], [PLAY B] and
[PAUSE F] again to move to the end
point, and press [ENTER].
[K / L] and then press [ENTER]
Edit - Scene Delete
PL
Are you sure?
1
Yes
Edit - Scene Delete
PL
No
Start
1
End
Preview
Delete
JAN/ 6/11 1:00AM L1 LP
1 : 50 : 00
JAN/ 6/11 1:00AM L1 LP
1 : 45 : 00
The part of the title is deleted.
The cursor will move to “Preview”.
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the
area selected for deletion is indicated in red.
You can check the preview by pressing [ENTER]
• Before and after 5 seconds of the deleted point
will be playback for preview.
This operation may take
awhile to be completed.
start point
end point
editing
Edited
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Playlist
Use [K / L] to select “Edit”, then
press [ENTER].
e.g.) VR mode DVD-RW playlist
You can divide one title into two new titles.
Play From Start
Edit
Title Delete
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [SKIP H], [SKIP G], [REV E],
[FWD D], [PAUSE F] and [PLAY B]
to decide the point at which you will
divide the title.
TRACKING
SAT.LINK
PQRS
TUV
TIMER
PROG.
SPACE
Use [K L] to select “Title Dividing”,
then press [ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW playlist
ENTER
CLEAR
RETURN
Edit - Title Dividing
PL
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Yes
1
No
REV
PLAY
STOP
SKIP
SKIP
DVD
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
PAUSE
VCR
DUBBING
REC MODE REC
The title will be divided into two new titles.
Both title names are identical.
REPEAT TIMER SET SEARCH ZOOM
For DVD+RW: Data will be written onto the disc
momentarily.
Writing to Disc
90%
Press [DVD].
In stop mode, press [TOP MENU].
This operation may take
awhile to be completed.
• For VR mode DVD-RW, press [DISC MENU] to
select “Playlist”.
For VR mode DVD-RW: Proceed to step 7.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
99 (-RW) or 49 (+RW), and the number of recording
chapters reaches the maximum of 999 (-RW) or 254
(+RW).
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Combining Titles
Follow the steps 1 to 3 in “Dividing a
Playlist
Title” on page 79 to display “Edit”
menu.
Use [K L
Combining”, then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Edit
PL
Scene Delete
1
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
TRACKING
SAT.LINK
PQRS
TUV
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
TIMER
PROG.
SPACE
Title combining setting window will appear.
Selected title grays out, and the frame of the
next title becomes yellow.
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Edit - Title Combining
PL
JAN/ 6/11 11:00PM L1 LP
11:00PM (0:30:00)
JAN/ 6/11
L1 LP
1
2
3
6
ENTER
1 +
CLEAR
RETURN
4
5
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
1 / 6
REV
PLAY
STOP
Use [K L { B] to select another
SKIP
SKIP
DVD
title to combine, then press [ENTER].
Selection menu will appear.
PAUSE
VCR
Use [K L] to select “Yes”, then press
DUBBING
REC MODE REC
[ENTER].
REPEAT TIMER SET SEARCH ZOOM
Combine selected titles?
Yes
No
The two titles will combine into a single title.
Title List
PL
JAN/ 6/11 12:00AM L1 LP
12:00AM (2:30:00) JAN/ 6/11
L1 LP
1
2
3
6
4
5
1 / 6
Press [RETURN] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
• You cannot select the same title twice and combine
it into a single title.
If either one of the two original titles is deleted, the
combined new title is also deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing the Title Protection
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 73 to display
Original
To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.
Use [K / L] to select “Protect”, then
press [ENTER].
Edit
ORG
Scene Delete
1
OPEN/
INPUT
Edit Title Name
Chapter Mark
Protect
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
SAT.LINK
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
PQRS
TUV
• If the title is protected,
the original list.
icon will appear in
TIMER
PROG.
SPACE
Confirm the indication
SETUP DISPLAY AUDIO
TOP MENU
“OFF ON”. Press [ENTER] again.
• If the title is already protected, “ON OFF” will
appear. If you press [ENTER], the title will be
released from protection.
DISC MENU
ENTER
Edit - Protect
ORG
CLEAR
RETURN
OFF
ON
1
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
SKIP
SKIP
DVD
icon will appear on the title in the original
PAUSE
VCR
DUBBING
REC MODE REC
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
REPEAT TIMER SET SEARCH ZOOM
This operation may take
awhile to be completed.
To protect a whole disc
(VR mode DVD-RW, DVD+RW/+R
only):
Select “Disc Protect OFF ON” from the DVD
Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on page
30.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 81
EDITING DISCS
Setting or Clearing All Chapter Marks at Once
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 73 to display
“Edit” menu.
For titles in video mode DVD-RW, you can set or edit
chapter at every time interval. You can clear the chapter
mark too.
You can specify the interval of chapter marks for titles last
more than 5 minutes.
Use [K L] to select “Chapter Mark”,
then press [ENTER].
OPEN/
INPUT
Edit
Video
CLOSE SELECT
HDMI
Edit Title Name
1
Chapter Mark
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
SAT.LINK
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
PQRS
TUV
TIMER
PROG.
SPACE
Use [K / L] to select the desired
interval, then press [ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Edit - Chapter Mark
Video
OFF
1
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
ENTER
CLEAR
RETURN
INSTANT 1.3x/0.8x
JAN/ 6/11 1:00AM L1 LP
1 : 25 : 47
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
Use [K L] to select “Yes”, then press
[ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
Press [RETURN] and then [RETURN] or
[STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for video mode DVD is
99 chapters per title.
• The interval for auto chapter may be up to two
minutes different from the time option you set.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Items (highlight is the default)
Parental Lock
Contents
Playback
Set the parental level for DVD playback.
OFF
page 86
level 8 [Adult] to
1 [Kid Safe]
ON
Audio Out Dynamic Range
→ page 87
Compressing the range of sound volume.
Control
Set whether the sound recorded in 96kHz
will be down sampled to 48kHz.
48kHz
96kHz
PCM
ON
Dolby Digital
DTS
Set the type of sound signal which outputs
from the digital audio output jack.
Set whether DTS signal is output or not.
OFF
Disc Menu Language
page 88
Set the language for disc menu language.
English
French
Spanish
Other
Original
English
French
Spanish
Other
OFF
English
French
Spanish
Other
Audio Language
page 88
Set the language for audio.
Subtitle Language
page 88
Set the language for subtitles.
Angle Icon
page 88
Set whether to display the angle icon or not.
OFF
Still Mode
page 88
Set the type of still image in pausing
playback.
Auto
Field
Frame
Display
OSD Language
page 89
Set the language for OSD (on-screen
display).
English
Français
Español
Screen Saver
page 89
OFF
Set the idling time before the screen saver
starts.
5 minutes
10 minutes
15 minutes
FL Dimmer
page 89
Progressive
→ page 90
Set the brightness of the front panel display.
Bright
Dark
ON
Video
Set to the progressive scan mode (set to
"ON") or to the interlace scan mode (set to
"OFF").
TV Aspect
→ page 90
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Set a picture size according to aspect ratio of
your TV.
Select Video - L1 (Rear)
page 27
Set the video input type for the external
input.
Video In
S-Video In
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
Setup
Items (highlight is the default)
Contents
Recording Auto Chapter
OFF
Insert chapter marks at even time interval.
→ page 35
5 minutes
10 minutes
15 minutes
30 minutes
Recording Audio Select (XP)
Set the recording audio type. (Only when the
rec mode is set to XP.)
Set the unit to finalize the disc automatically.
Dolby Digital
ON
OFF
→ page 36
Auto
Disc Full
Finalize
page 31
End of Timer Rec
ON
OFF
Aspect Ratio (Video mode)
page 36
Set a aspect ratio for video mode recording.
Auto
4:3
16:9
Dubbing Mode
→ pages 49 - 50
Make Recording Compatible
→ page 35
Clock Setting
page 26
Format
Set the VCR to DVD (DVD to VCR)
duplication.
VCR DVD
ON
Set to prohibit additional recording (OFF) or
to replace the title list after recording (ON).
Set the clock.
OFF
Clock
HDMI
Set the color space for the HDMI output.
RGB
ON
→ page 91
→ page 91
RGB Range
page 91
Set whether to output the HDMI audio signal
OFF
Set the black-white contrast level for HDMI
RGB output.
Normal
Enhanced
Yes
Reset All
Set to the default setting.
page 92
No
Note
Your change to each setting stays on even when the power is off.
An item which is not currently available is grayed in the settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
P layback
Press [SETUP] and use [K / L] to
select “General Setting“, then press
[ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
Use [K / L] to select “Playback”, then
press [ENTER].
TRACKING
SAT.LINK
PQRS
TUV
General Setting
Playback
Display
Video
Recording
Clock
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
TOP MENU
HDMI
Reset All
DISC MENU
ENTER
CLEAR
RETURN
Use [K L] to select a desired item,
then press [ENTER].
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Parental Lock
Audio Out
1
2
3
4
5
6
7
REV
PLAY
STOP
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
SKIP
SKIP
DVD
Still Mode
PAUSE
VCR
Submenu will appear.
DUBBING
REC MODE REC
Refer to
on pages 86 - 88 and set
REPEAT TIMER SET SEARCH ZOOM
When you finish with the setting,
press [SETUP] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select the desired level, then press
[ENTER].
Use [K / L] to select “Yes”, then press [ENTER]. Use
[the Number buttons] to enter a new password except
for 4737, then press [ENTER].
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
• Use [the Number buttons] to enter the current
password.
5 [PG R]
4 [PG 13]
3 [PG]
Password Input
2 [G]
1 [Kid Safe]
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password except for 4737, then press
[ENTER].
If a password has not been set yet, proceed to
If a password has been set already, proceed to
<change the password>
• OFF : Parental Control is inactive; all discs can play.
• 8 [Adult]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC 17]: No one under 17 admitted.
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
• 6 [R]: Restricted; under 17 requires accompanying
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
• Press [CLEAR] to erase numbers entered incorrectly.
When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4737 using
[the Number buttons] in password input window.
Password will be cleared and parental levels will be
set to “OFF”.
• 1 [Kid Safe]: Suitable for children.
Parental lock function may not be available to some
discs.
With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
• Record the password in case you forget it.
If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Choose the appropriate audio setting for your external device.
Use [K / L] to select a setting, then press [ENTER].
It will only affect a disc playback.
Dolby Digital
Use [
K
/
L] to select a desired item, then press [ENTER]
PCM
Stream
Audio Out
Your setting will be activated.
A
Dynamic Range Control
PCM
Dolby Digital
DTS
B
C
D
PCM
Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].
Dynamic Range Control
Select a setting using [K / L], then press [ENTER].
ON
OFF
DTS
ON
OFF
Note
Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
ON
: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS®, set to “ON”.
OFF
: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS®, set to “OFF”.
Use [K / L] to select a setting, then press [ENTER].
PCM
48kHz
96kHz
If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
When playing back disc with copyright protection
Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 87
GENERAL SETTING
Set the language for disc menu.
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a language, then press [ENTER].
Use [K / L] to select a setting, then press [ENTER].
Disc Menu Language
Angle Icon
English
French
Spanish
Other
ON
OFF
Your setting will be activated.
Select “Auto” usually.
Use [K / L] to select a setting, then press [ENTER].
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
Still Mode
Auto
Audio Language
Field
Frame
Original
English
French
Spanish
Other
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
• Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).
Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If “Other” is selected for
using [the Number buttons]
to
, press 4-digit code
Code Input
-
-
-
-
Refer to the language code table on page 100.
Only the languages supported by the disc can be
selected.
Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
Press [CLEAR] to erase numbers entered incorrectly.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Display
Set the language for the on-screen display.
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select a language, then press [ENTER].
OSD Language
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
English
Français
Español
TRACKING
SAT.LINK
PQRS
TUV
TIMER
PROG.
SPACE
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [ENTER].
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Screen Saver
OFF
ENTER
1 minute
5 minutes
10 minutes
15 minutes
CLEAR
RETURN
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Your setting will be activated.
REV
PLAY
STOP
SKIP
SKIP
DVD
Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
PAUSE
VCR
FL Dimmer
DUBBING
REC MODE REC
Bright
Dark
REPEAT TIMER SET SEARCH ZOOM
You can choose one from “Bright” or “Dark”.
Front panel display stays off while the unit is in the
standby mode.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
Use [K / L] to select “Display”, then
press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
OSD Language
Screen Saver
FL Dimmer
1
2
3
Submenu will appear.
Press [SETUP] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 89
GENERAL SETTING
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
TRACKING
SAT.LINK
PQRS
TUV
1) Use [K / L] to select “ON“, then press [ENTER].
TIMER
PROG.
SPACE
Progressive
SETUP DISPLAY AUDIO
TOP MENU
ON
OFF
DISC MENU
{ / B] to select “Yes“, then press [ENTER].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
ENTER
CLEAR
RETURN
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Activate?
Yes
No
REV
PLAY
STOP
K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
SKIP
SKIP
DVD
Your setting will be activated.
PAUSE
VCR
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV.(Refertopages20-21.)Ifnot,usetheRCAvideocableand
set the progressive scan to “OFF”.
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Press [SETUP] and use [K L] to
select “General Setting”, then press
[ENTER].
Use [K L] to select “Video”, then
press [ENTER].
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [ENTER].
Use [K / L] to select a desired item,
then press [ENTER].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
1
2
3
Progressive
TV Aspect
Select Video
If you have a standard TV:
Submenu will appear.
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
Refer
on this page and set
• For
refer to “SETTINGS FOR THE VIDEO
If you have a widescreen TV:
INPUT” on page 27.
When you finish with the setting,
press [SETUP] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Use [K / L] to select a desired item,
then press [ENTER].
Format
HDMI Audio
RGB Range
1
OPEN/
INPUT
CLOSE SELECT
HDMI
2
3
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
TRACKING
SAT.LINK
When you finish with the setting,
press [SETUP] to exit.
PQRS
TUV
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
TOP MENU
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
DISC MENU
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
ENTER
CLEAR
RETURN
Format
RGB
YCbCr
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
REV
PLAY
STOP
SKIP
SKIP
DVD
PAUSE
VCR
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
DUBBING
REC MODE REC
Use [K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
HDMI Audio
ON
OFF
Your setting will be activated.
Use [K L] to select “HDMI”, then
press [ENTER].
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
General Setting
Playback
Display
Video
Recording
Clock
Use [K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
HDMI
Reset All
RGB Range
Normal
Enhanced
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
Your setting will be activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 91
GENERAL SETTING
Reset the setting to default.
Press [SETUP] in stop mode and use
[K L] to select “General Setting”,
then press [ENTER].
OPEN/
INPUT
CLOSE SELECT
HDMI
Use [K / L] to select “Reset All”, then
press [ENTER].
.@/:
GHI
ABC
JKL
DEF
MNO
WXYZ
General Setting
TRACKING
SAT.LINK
Playback
Display
Video
Recording
Clock
PQRS
TUV
HDMI
Reset All
TIMER
PROG.
SPACE
SETUP DISPLAY AUDIO
TOP MENU
DISC MENU
Select “Yes” using [K / L] , then press
ENTER
[ENTER].
CLEAR
RETURN
Reset to factory default?
INSTANT 1.3x/0.8x
TIME SLIP
FWD
SKIP
PLAY
Yes
No
REV
PLAY
STOP
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER]
Your setting will be initialized.
SKIP
SKIP
DVD
PAUSE
VCR
DUBBING
REC MODE REC
REPEAT TIMER SET SEARCH ZOOM
The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- OSD language setting
- Parental lock setting
- Timer programs
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Recording
Caution on using S-video, component, or HDMI
connection for VCR:
• Only the playback audio / video are available with these
connections.
Press [VCR] first.
Before recording, make sure:
• The appropriate external input position (L1/L2) to which
• Under the conditions listed below, the playback image
and audio cannot be output. Use the standard video
connection, in such case;
your external tuner is connected is selected by pressing
[INPUT SELECT
]
• There is a cassette tape with an erase-protection tab in
the unit.
- during DVD recording.
- when L3 (DV-IN) is selected.
• The desired recording speed is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing [REC MODE] repeatedly.
• HDMI video resolution cannot be changed when the
unit is in VCR mode.
Recording speed:
Playback
Tape speed
Type of tape
SP
Recording / playback time
T60
T120
T160
1hour
2hours
6hours
2-2/3hours
8hours
1)Press [/y ON/STANDBY] on the remote control or
the front panel of the unit.
SLP
3hours
When you are playing back a cassette tape, turn on the
TV and be sure to select the input to which the unit is
• Refer to pages 39 - 42 for instructions on timer recording.
1)Press [REC I] to begin the recording.
Press [VCR].
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
2)Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
3)During playback, press [PAUSE F].
Playback will pause and sound will be muted.
4)Press [PLAY B] to resume playback.
5)Press [STOP C] to stop playback.
6)Press [OPEN/CLOSE A] to eject the cassette tape.
2)Press [STOP C] when the recording is completed.
• When a cassette tape ends during playback, fast-
forward or normal recording, the unit will
automatically rewind to the beginning of the
cassette tape. After rewinding finishes, the unit will
eject the cassette tape.
When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
erase-protection tab
the hole with cellophane tape.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
• This function is available only when the unit is
connected by the VIDEO OUT jack.
[TRACKING
/
].
Playback will stop when you change the output
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
One-touch Timer Recording (OTR)
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
Press [VCR] first.
1)Press [SEARCH] so that “INDEX SEARCH” menu
appears.
1)During normal recording, press [REC I] to begin
the one-touch timer recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
2)Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
(0:30)
(1:00)
(Normal recording)
(8:00)
(7:30)
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-touch
timer recording, press [REC I] repeatedly until the
desired length appear.
3)Press [REV E], [FWD D] to start index search.
To cancel the one-touch timer recording within the
specified time, press [STOP C]
If you want to go in the forward direction, press
[FWD D]
If you want to go in the reverse direction, press
[REV E]
• The remaining recording time will be displayed on
the front panel display during one-touch timer
recording. Press [DISPLAY]
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
• You cannot pause the one-touch timer recording.
Beginning
of tape
End
of tape
If VCR the one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
INDEX MARK
- Turning off the power (One-touch timer recording
will be canceled.).
- Using [REC I] or [STOP C]
You can make the index mark up to 20.
This function is available only when the unit is
connected by the VIDEO OUT jack.
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
standby mode automatically if a timer recording has
been programmed. Press [TIMER SET] to cancel the
standby mode for using the unit continuously.
This function is available only when the unit is
connected by the VIDEO OUT jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Other Operations
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [FWD D] to fast
forward the cassette tape.
Press [VCR] first.
1)Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
Rewind:
When the unit is in stop mode, press [REV E] to rewind
the cassette tape.
To cue or review picture during playback (picture search):
Press [REV E] [FWD D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
2)Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [TRACKING
/
]
If the picture is distorted or rolling vertically, adjust the
3)Press [REV E], [FWD D] to start time search.
If you want to go in the forward direction, press
[FWD D]
If you want to go in the reverse direction, press
[REV E]
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE F] during playback, then press D]
D] E] repeatedly during slow
motion playback to select the desired speed.
After time search, the unit will play back the cassette
tape automatically.
Automatic rewind:
When a cassette tape is played back or fast forwarded to
its end, the cassette tape will rewind to the beginning,
stop and eject itself.
To repeat a playback indefinitely without touching
[PLAY B] (Auto Repeat Playback):
Note
• Index search and time search are not available
during recording.
• Press [STOP C] to stop the search.
During normal playback, press [REPEAT]. When a tape is
played to its end, the tape will rewind to the beginning and
start playback itself. To cancel the Auto Repeat Playback,
press [REPEAT] again.
When you playback a cassette tape recorded in Hi-Fi
stereo:
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
Press [AUDIO ] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Your Selection
HIFI
MONO
Monaural
L+R
L-channel
R-channel
Type of recorded tape
non Hi-Fi tapes
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program program program
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
To return to playback from the picture search/still/
slow mode, press [PLAY B]
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
• Press [TIMER SET] to cancel the timer standby mode.
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• Check the connection to your TV (pages 19 - 24).
• Check if the progressive scan mode is set correctly according to your TV
(page 90).
• Switch the input selector on your TV (such as to “L1”) so that the signal
from the unit appears on the TV screen.
Cannot record a TV program.
• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to an external tuner to record TV programs
(page 19).
TV program pictures are distorted.
Playback picture is distorted.
• Check if all the connections are made correctly (page 19).
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
Playback picture or TV program from
• If the playback picture output from a DVD player, VCR or tuner goes
the device connected through the unit through the unit before reaching your TV, the copy-protection signal
is distorted.
applied to some programs could affect picture quality. Disconnect the
playback device in question and connect it directly to your TV.
There is no sound.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
D
V
D
•
• If the audio signal does not come through the DIGITAL AUDIO OUT
(COAXIAL) jack, check the setting in “Audio Out” (page 87).
• While the setup menu or timer programming display is shown, or while
the screen saver is active, the audio is muted.
V
C
R
No DTS sound on digital output.
No DTS sound from analog output.
• Change the setting menu for “DTS” to “ON”.
• This unit has no analog sound output when playing back the selected
DTS sound mode.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (page 26).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Timer recording does not start.
• No disc is inserted.
• A disc is not recordable (finalized DVD-RW/-R, finalized DVD+R, a fully
recorded disc, etc.).
Timer recording is not complete or did • The timer setting overlapped with another setting that has priority
not start from the beginning.
(page 42).
• Disc space was not enough.
• “Make Recording Compatible“ is not set to “ON”, when recording onto
DVD+RW/+R that was recorded on other unit.
Timer recording is impossible.
• Make sure
[TIMER SET]
appears on the front panel display of this unit. If not, press
The remote control does not function.
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• The remote control is not pointed at the infrared sensor window on the unit.
• Press [DVD] or [VCR], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units are in stop mode.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC
with another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply
for the unit and re-connect the DVC.
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled
unit.
depending on the type of DVC.
• If a DVC signal cannot be input, use an external input (L1 (Rear)/L2
(front)) for analog connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to DVD control and
execute the normal recording procedure while operating the DVC.
D
V
D
•
Certain functions of the unit cannot
operate.
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
V
C
R
• With L3 (DV-IN), the disc display menu does not appear unless disc
playback is executed.
DV audio signal cannot be switched.
No image from HDMI connection.
• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.
• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an
HDMI cable, the audio/video signal may not be output when playing
back a commercial DVD-video.
There is no picture.
• If the setup menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 90).
Picture noise appears.
• Clean the disc with a cleaning cloth.
Playback picture from the external
devices connected to this unit is
distorted.
• If the picture output signal from the external devices passes through this
unit to get to your TV, the copy protection signal applied to some DVD could
affect the picture quality. Disconnect the playback device in question and
connect it directly to your TV.
There is no sound.
• If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting
in “Audio Out” (page 87).
• Clean the disc with a cleaning cloth.
Sound is noisy.
The disc does not play back.
• Clean the disc with a cleaning cloth.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
D
V
D
• The unit cannot play back certain discs (such as a CD-ROM) (page 10).
• The region code on the DVD-video does not match the unit (page 10).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 3).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Playback image freezes for a second.
• During the playback of 2 layered disc, picture may freeze for a moment
when the 1st layer switches to the 2nd layer. This is not a malfunction.
Discs recorded on this unit cannot be • If you are using DVD-RW/-R or DVD+R, please ensure you finalized the
played back on other DVD players. disc after recording (pages 31 - 33).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 97
TROUBLESHOOTING
Symptom
Remedy
The disc does not start playback from
the beginning.
• Resume playback was activated (page 56). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
The unit starts playing back the disc
automatically.
• The DVD-video features an auto playback function.
Some functions such as stop, search,
or slow-motion playback cannot be
performed.
• Depending on the disc, you may not be able to do some of the
operations. Refer to the instruction manual supplied with the disc.
The language for the sound track
cannot be changed.
• The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound
track.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately
• It may take a few seconds for the unit to input disc data before
recording stops.
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc data to
the disc.
D
V
D
after you press [STOP C]
The disc tray does not open when you
press [OPEN/CLOSE A]
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In a case you intend to cancel the
repairing process.
[A OPEN/CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing
process ? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
There is no sound or the sound is
distorted.
• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
Setup menu cannot be called up.
There is no picture.
• Setup menus cannot be called up during DVD recording and playback.
• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
HDMI OUT jack, try connecting it to AUDIO / VIDEO OUT jack instead.
Picture noise appears.
• Head cleaning for VCR may be necessary. Refer to “Auto Head Cleaning”
(page 5).
• Adjust tracking control for better picture by pressing [TRACKING
/
]
V
C
R
while you are playing back a cassette tape.
The cassette tape does not play back. • No cassette tape is inserted.
The tape ejected after you press
• Make sure the cassette tape has an erase-protection tab when you
record to a cassette tape. If needed, cover the hole with cellophane
tape.
[REC I]
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which have
the marks on pages 9 - 10.
— Please eject the disc. —
Playback feature may not be available on this disc.
•
Insert the disc with the labeled side facing up.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 86).
Recording Error
This program is not allowed to be recorded.
• You are trying to record the copy
prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in Video
mode.
• You are trying to record the copy-once
program onto the DVD-RW disc in
Video mode.
• Set “Format Mode” to “VR mode”
(pages 28 - 29).
Recording Error
This program is not recordable in +VR mode.
• You are trying to record the copy-once
program.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 9).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This program is not allowed to be
recorded.
• You are trying to record the copy-once
program onto the DVD-RW disc which
is not compatible with CPRM.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
Recording Error
This disc is protected and not recordable.
You are trying to record onto the protected
• Release the disc protect setting in “DVD
Menu” menu (page 30).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
You are trying to record onto the
DVD-RW/-R on which the number of recording
titles comes up to the maximum (99).
• Delete unnecessary titles (pages 69 - 70).
(The maximum is 99)
Recording Error
You are trying to record onto the VR mode
DVD-RW on which the number of recording
chapters comes up to the maximum (999).
• Delete unnecessary chapter marks
(page 75).
You cannot record more than 999 chapters on one disc.
(The maximum is 999)
Recording Error
(The maximum is 49)
You are trying to record onto the
DVD+RW/+R on which the number of
recording titles comes up to the maximum
(49).
• Delete unnecessary titles (pages 69 - 70).
Recording Error
You cannot record more than 254 chapters on one disc.
(The maximum is 254)
You are trying to record onto the DVD+RW
• Delete unnecessary chapter marks
(page 75).
on which the number of recording
chapters comes up to the maximum (254).
Recording Error
You cannot record on this disc as Control
Information is full.
This disc has no space to write the Control
• Delete unnecessary titles (pages 69 - 70).
Information when recording or deleting contents.
When editing has been repeatedly performed,
the control Information area may come up to be
full even the recording area has enough space.
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 49 titles.
• Insert a new disc.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Undo the finalizing for this disc (page 33).
Recording Error
• You are trying to record onto the
unfinalized +VR mode discs recorded
on other unit.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 35).
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line to locate an Authorized Service Center.
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
– Can I program a timer recording with cable/satellite box?
No, you cannot control the unit by PC.
Yes, you can. Select “L1(Rear)” or “L2(Front)” as your
recording channel, and leave the cable/satellite box
on (pages 19, 27 and 39 - 42).
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4752
4759
4764
5471
4765
4772
4847
5167
4860
5072
4854
4864
4853
5971
4851
5759
4947
4961
5464
4965
5047
5160
5161
5166
5261
5256
5255
5271
5358
5747
5051
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5551
5557
5347
5566
5669
5760
5765
5757
6469
5771
5761
5767
5861
5847
5868
5860
5957
5953
5965
5958
5955
5964
5961
5960
6047
6051
6149
6164
6159
6247
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Shona
Code
6467
6559
6553
5350
6564
6554
6566
6560
6550
6555
6565
6557
6558
5165
6567
6569
6568
6658
6653
6666
6651
6654
4861
6661
6665
6664
6657
6669
6757
6772
6855
6861
4971
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Basque
Bengali;Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Corsican
Croatian
Czech
Danish
English
Esperanto
Estonian
Faroese
Fiji
Finnish
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Ukrainian
Frisian
Uzbek
Galician
Georgian
German
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PCM (Pulse Code Modulation)
An electrical signal that directly represents sound.
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital
“Digital Audio”.
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Progressive Scan (480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 90 for instructions on
selective progressive scan mode.
Chapter
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
R) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
Sampling Frequency
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Dolby® Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
Title (DVD only)
A collection of chapters on DVD. See also “Chapter”.
DTS® (Digital Theater System)
DTS® is a multi channel surround sound system. By
connecting to DTS decoder you can enjoy dynamic and
realistic sound like movie theatre. DTS surround sound
technologies were developed by DTS, Inc.
Audio CD use tracks to divide up the content of a disc.
The DVD equivalent is called a chapter. See also “Chapter”.
Video mode is the same recording format as used on
the DVD videos you purchase in local shops. You can
play back the discs recorded in this format in most DVD
players, however it offers only limited editing. You will
need to finalize discs recorded in video mode before
playing them back on other unit.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players.
HDMI (High-Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
A basic recording format for DVD-RW. VR mode offers
advanced editing, however it is playable only on VR
mode compatible unit. Finalization is recommended
before playing them back on other unit.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still image files. You can
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
WMA (Windows Media™ Audio)
WMA is the audio compressing technology developed by
Microsoft. You can copy WMA files on CD-RW/-R from a
computer and play them back on this unit.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
+VR mode
A recording format for DVD+RW/+R. +VR mode offers basic
editing, and it is playable on most DVD players. Finalization
is recommended before playing them back on other unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 101
SPECIFICATIONS
• This model complies with the below specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
General
VCR video heads
Four heads
Power requirements
Power consumption
Weight
AC120 V, 60 Hz
30 W (standby: 2.80 W)
9.5 lbs ( 4.3 kg )
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV system
17.2” x 4.0” x 10.6” (435 x 99.5 x 268 mm)
41 °F to 104 °F (5 °C to 40 °C)
Less than 80% (no condensation)
NTSC TV standard
Recording
Recording format
VR (video recording) format
Video format
+VR format
Recording discs
DVD-Rewritable/-Recordable, DVD+Rewritable/+Recordable
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
48 kHz
Dolby Digital/LPCM (XP Recording mode only)
Input / Output
Video input
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Input level
Jacks
Video output
Output level
Jack
S-video input
Y (luminance) - Input level
C (color) - Input level
Jacks
S-video output
Y (luminance) - Output level
C (color) - Output level
Jack
Component video output
Output level
Jacks
Output 1 (rear)
1 Vp-p (75Ω)
RCA jack
Input 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
HDMI output
Jack
HDMI jack
Audio input
During audio input
Jacks
Audio output
During audio output
Input 1 (rear), 2 (front) L/R
2 V rms (input impedance: more than 22 kΩ)
RCA jacks
Output 2 L/R (rear)
2 V rms (output impedance: less than 1 kΩ)
RCA jacks
Digital audio output
Output level
Jack
DV input
Output 1 (rear) COAXIAL
500 mVp-p (75Ω)
RCA jack
IEEE 1394
DV input jack (4 pin)
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
/LPLWHGꢀ&DQDGLDQꢀ:DUUDQW\
)RUꢀ7RVKLEDꢀ%UDQGꢀ'LJLWDOꢀ$XGLRꢁ9LGHRꢀ3URGXFWV
7RVKLEDꢀRIꢀ&DQDGDꢀ/LPLWHGꢀꢁꢂ7&/ꢂꢃꢀPDNHVꢀWKHꢀIROORZLQJꢀOLPLWHGꢀZDUUDQWLHVꢀWRꢀRULJLQDOꢀFRQVXPHUVꢀLQꢀ&DQDGDꢄꢀ7+(6(ꢀ/,0,7('ꢀ
:$55$17,(6ꢀ(;7(1'ꢀ72ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ385&+$6(5ꢀ25ꢀ$1<ꢀ3(5621ꢀ5(&(,9,1*ꢀ7+,6ꢀ726+,%$ꢀ%5$1'ꢀ
',*,7$/ꢀ$8',2ꢁ9,'(2ꢀ352'8&7ꢀꢂWKHꢀꢃ'$9ꢀ352'8&7ꢂ6ꢄꢃꢀRUꢀꢃ'$9ꢀ3URGXFWꢂVꢄꢃꢄꢀ$6ꢀ$ꢀ*,)7ꢀ)520ꢀ7+(ꢀ25,*,1$/ꢀ&21680(5ꢀ
385&+$6(5ꢀ$1'ꢀ72ꢀ12ꢀ27+(5ꢀ385&+$6(5ꢀ25ꢀ75$16)(5((ꢅ
'$9ꢀ352'8&76ꢀ385&+$6('ꢀ,1ꢀ&$1$'$ꢆꢀ$1'ꢀ86('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ
7+(ꢀ81,7('ꢀ67$7(6ꢀ$1'ꢀ0(;,&2ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅꢀꢀ
'$9ꢀ352'8&76ꢀ385&+$6('ꢀ$1<:+(5(ꢀ2876,'(ꢀ2)ꢀ&$1$'$ꢆꢀ,1&/8',1*ꢆꢀ:,7+287ꢀ/,0,7$7,21ꢆꢀ7+(ꢀ81,7('ꢀ67$7(6ꢀ
$1'ꢀ0(;,&2ꢆꢀ$1'ꢀ86('ꢀ,1ꢀ&$1$'$ꢆꢀ$5(ꢀ127ꢀ&29(5('ꢀ%<ꢀ7+(6(ꢀ:$55$17,(6ꢅ
Fꢄ 5HSDLUꢀRIꢀGDPDJHꢀWKDWꢀLVꢀFRVPHWLFꢀRQO\ꢀRUꢀGRHVꢀQRWꢀDIIHFWꢀ
WKHꢀ'$9ꢀ3URGXFWꢀIXQFWLRQDOLW\ꢅꢀVXFKꢀDVꢀZHDUꢀDQGꢀWHDUꢅꢀ
VFUDWFKHVꢀDQGꢀGHQWVꢏ
Gꢄ 6HUYLFHꢀRQꢀ7RVKLEDꢐEUDQGHGꢀDFFHVVRU\ꢀLWHPVꢀꢁVXFKꢀ
DFFHVVRU\ꢀLWHPVꢀPD\ꢀEHꢀFRYHUHGꢀE\ꢀWKHLUꢀRZQꢀZDUUDQW\ꢃꢏ
Hꢄ 6HUYLFHꢀRQꢀWKLUGꢀSDUW\ꢀSURGXFWVꢀRUꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀ
E\ꢀXVHꢀRIꢀLQFRPSDWLEOHꢀWKLUGꢀSDUW\ꢀSURGXFWVꢏꢀ
/LPLWHGꢀ2QHꢀꢂꢇꢄꢀ<HDUꢀ:DUUDQW\ꢀRQꢀ3DUWVꢀDQGꢀ/DERXU
6XEMHFWꢀWRꢀWKHꢀPRUHꢀOLPLWHGꢀZDUUDQW\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀLVꢀXVHGꢀIRUꢀ
DQ\ꢀFRPPHUFLDOꢀRUꢀEXVLQHVVꢀSXUSRVHVꢀDVꢀVHWꢀRXWꢀEHORZꢅꢀ7&/ꢀ
ZDUUDQWVꢀWKHꢀ'$9ꢀ3URGXFWꢀDQGꢀLWVꢀSDUWVꢀDJDLQVWꢀPDWHULDOꢀGHIHFWVꢀLQꢀ
PDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ3URGXFWꢀIDLOLQJꢀIRUꢀ
DꢀSHULRGꢀRIꢀRQHꢀꢁꢆꢃꢀ\HDUꢀDIWHUꢀWKHꢀGDWHꢀRIꢀRULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ
'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ
25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ:,7+ꢀ$ꢀ1(:ꢀ25ꢀ
5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ72ꢀ<28ꢀ)25ꢀ
3$576ꢀ25ꢀ/$%285ꢅꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ(17,5(ꢀ'$9ꢀ
352'8&7ꢀ72ꢀ$ꢀ7&/ꢀ'$9ꢀ352'8&7ꢀ$87+25,=('ꢀ6(59,&(ꢀ
3529,'(5ꢀꢂꢃ$63ꢃꢄꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ
75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅꢀ
5HQWDOꢀ8QLWV
7KHꢀZDUUDQW\ꢀIRUꢀ'$9ꢀ3URGXFWꢀUHQWDOꢀXQLWVꢀEHJLQVꢀZLWKꢀWKHꢀGDWHꢀRIꢀ
ILUVWꢀUHQWDOꢀRUꢀWKLUW\ꢀꢁꢇꢈꢃꢀGD\VꢀIURPꢀWKHꢀGDWHꢀRIꢀVKLSPHQWꢀWRꢀWKHꢀUHQWDOꢀ
ILUPꢅꢀZKLFKHYHUꢀFRPHVꢀILUVWꢄ
Iꢄ 6HUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀVLPXOWDQHRXVꢀXVHꢀRIꢀWKLVꢀ
'$9ꢀ3URGXFWꢀDQGꢀFRQQHFWHGꢀHTXLSPHQWꢏꢀ
Jꢄ
0RGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀQRWꢀDSSURYHGꢀLQꢀZULWLQJꢀ
E\ꢀ7&/ꢅꢀDQGꢀVHUYLFHꢀPDGHꢀQHFHVVDU\ꢀE\ꢀWKHꢀXVHꢀRUꢀ
LQVWDOODWLRQꢀRIꢀQRQꢐ7RVKLEDꢀPRGLILFDWLRQVꢀWRꢀWKHꢀ'$9ꢀ
3URGXFWꢏꢀ
Kꢄ 6HUYLFHꢀRIꢀDꢀ'$9ꢀ3URGXFWꢀRQꢀZKLFKꢀWKHꢀ726+,%$ꢀODEHOꢀRUꢀ
ORJRꢅꢀUDWLQJꢀODEHOꢀRUꢀVHULDOꢀQXPEHUꢀKDYHꢀEHHQꢀGHIDFHGꢀRUꢀ
UHPRYHGꢏ
Lꢄ 2QꢐVLWHꢀVHUYLFHꢀDQGꢀUHSDLUꢀRIꢀWKHꢀ'$9ꢀ3URGXFWꢏ
Mꢄ 'DPDJHꢀWRꢀWKHꢀ'$9ꢀ3URGXFWꢀFDXVHGꢀE\ꢀIDLOXUHꢀWRꢀIROORZꢀ
WKHꢀVSHFLILFDWLRQVꢅꢀ8VHUꢀPDQXDOVꢀRUꢀJXLGHVꢀDVꢀWRꢀXVDJHꢀ
DQGꢌRUꢀVWRUDJHꢄ
/LPLWHGꢀ:DUUDQW\ꢀIRUꢀ&RPPHUFLDOꢀ8QLWV
7&/ꢀZDUUDQWVꢀ'$9ꢀ3URGXFWVꢀWKDWꢀDUHꢀXVHGꢀIRUꢀDQ\ꢀFRPPHUFLDOꢀRUꢀ
EXVLQHVVꢀSXUSRVHVꢀDVꢀIROORZVꢉꢀꢀDOOꢀSDUWVꢀDUHꢀZDUUDQWHGꢀDJDLQVWꢀ
PDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀZRUNPDQVKLSꢀWKDWꢀUHVXOWꢀLQꢀWKHꢀ'$9ꢀ
3URGXFWꢀIDLOLQJꢀIRUꢀDꢀSHULRGꢀRIꢀQLQHW\ꢀꢁꢊꢈꢃꢀGD\VꢀDIWHUꢀWKHꢀGDWHꢀRIꢀ
RULJLQDOꢀUHWDLOꢀSXUFKDVHꢄꢀ'85,1*ꢀ7+,6ꢀ3(5,2'ꢆꢀ7&/ꢀ:,//ꢆꢀ
$7ꢀ7&/·6ꢀ237,21ꢆꢀ5(3$,5ꢀ25ꢀ5(3/$&(ꢀ$ꢀ'()(&7,9(ꢀ3$57ꢀ
:,7+ꢀ$ꢀ1(:ꢀ25ꢀ5()85%,6+('ꢀ3$57ꢆꢀ:,7+287ꢀ&+$5*(ꢀ
72ꢀ<28ꢀ)25ꢀ3$576ꢀ25ꢀ/$%285ꢅꢀꢀ<28ꢀ0867ꢀ'(/,9(5ꢀ7+(ꢀ
(17,5(ꢀ'$9ꢀ352'8&7ꢀ72ꢀ$1ꢀ$63ꢅꢀ<28ꢀ0867ꢀ3$<ꢀ)25ꢀ$//ꢀ
75$163257$7,21ꢀ$1'ꢀ,1685$1&(ꢀ&+$5*(6ꢀ)25ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ72ꢀ$1'ꢀ)520ꢀ7+(ꢀ$63ꢅ
'LVFODLPHUꢀDQGꢀ/LPLWDWLRQꢀRIꢀ5HPHG\
72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ%<ꢀ/$:ꢆꢀ$//ꢀ27+(5ꢀ
(;35(66ꢀ$1'ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ
5(35(6(17$7,216ꢀ)25ꢀ7+,6ꢀ'$9ꢀ352'8&7ꢆꢀ,1&/8',1*ꢀ
7+(ꢀ,03/,('ꢀ:$55$17,(6ꢀ$1'ꢀ&21',7,216ꢀ2)ꢀ
0(5&+$17$%,/,7<ꢀ$1'ꢀ),71(66ꢀ)25ꢀ$ꢀ3$57,&8/$5ꢀ
385326(ꢆꢀ$5(ꢀ+(5(%<ꢀ',6&/$,0('ꢀ$1'ꢀ(;&/8'('ꢅꢀꢀ
,)ꢀ7+(ꢀ$33/,&$%/(ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ
35(&/8'(6ꢀ7+(ꢀ(;&/86,21ꢀ2)ꢀ$1<ꢀ,03/,('ꢀ
:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ5(35(6(17$7,216ꢀ
7+(1ꢀ68&+ꢀ,03/,('ꢀ:$55$17,(6ꢆꢀ&21',7,216ꢀ$1'ꢀ
5(35(6(17$7,216ꢀ$5(ꢀ27+(5:,6(ꢀ/,0,7('ꢀ,1ꢀ
'85$7,21ꢀ72ꢀ7+(ꢀ7(50ꢀ2)ꢀ7+,6ꢀ(;35(66ꢀ:5,77(1ꢀ
/,0,7('ꢀ:$55$17<ꢅꢀꢀ72ꢀ7+(ꢀ(;7(17ꢀ127ꢀ35(&/8'('ꢀ
%<ꢀ/$:ꢆꢀ67$78725<ꢀ25ꢀ27+(5:,6(ꢆꢀ7+,6ꢀ:5,77(1ꢀ
:$55$17<ꢀ683(5&('(6ꢀ$1'ꢀ63(&,),&$//<ꢀ',6&/$,06ꢀ
$1<ꢀ27+(5ꢀ:$55$17<ꢆꢀ&21',7,21ꢀ25ꢀ5(35(6(17$7,21ꢀ
127ꢀ67$7('ꢀ,1ꢀ7+,6ꢀ:$55$17<ꢆꢀ:+(7+(5ꢀ0$'(ꢀ%<ꢀꢀ
7&/ꢆꢀ726+,%$ꢀ&25325$7,21ꢆꢀꢀ7+(,5ꢀ$)),/,$7(6ꢆꢀ$'5Vꢀ
$1'ꢀ$63Vꢀ$1'ꢀ:+(7+(5ꢀ0$'(ꢀ25$//<ꢀ25ꢀ,1ꢀ:5,7,1*ꢀ
ꢂ,1&/8',1*ꢀ$1<ꢀ67$7(0(17ꢀ,1ꢀ$1<ꢀ%52&+85(ꢆꢀ35(66ꢀ
5(/($6(ꢆꢀ$11281&(0(17ꢆꢀ$'9(57,6(0(17ꢆꢀ32,17ꢀ2)ꢀ
6$/(ꢀ',63/$<ꢆꢀ(7&ꢅꢄꢅꢀꢀ
<RXUꢀ5HVSRQVLELOLW\
7+(ꢀ$%29(ꢀ:$55$17,(6ꢀ$5(ꢀ68%-(&7ꢀ72ꢀ7+(ꢀ
)2//2:,1*ꢀ&21',7,216ꢈ
ꢁꢆꢃꢀꢀ<RXꢀPXVWꢀSURYLGHꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢄ
ꢁꢋꢃꢀꢀ$OOꢀZDUUDQW\ꢀVHUYLFLQJꢀRIꢀWKLVꢀ'$9ꢀ3URGXFWꢀPXVWꢀEHꢀSHUIRUPHGꢀ
ꢀꢀꢀꢀꢀꢀE\ꢀDQꢀ$63ꢄ
ꢁꢇꢃꢀꢀ7KHꢀZDUUDQWLHVꢀIURPꢀ7&/ꢀDUHꢀHIIHFWLYHꢀRQO\ꢀLIꢀWKHꢀ'$9ꢀ3URGXFWꢀ
ꢀꢀꢀꢀꢀꢀLVꢀꢁLꢃꢀSXUFKDVHGꢀDVꢀQHZꢀDQGꢀXQRSHQHGꢀIURPꢀ7&/ꢀRUꢀIURPꢀ7&/·Vꢀ
ꢀꢀꢀꢀꢀꢀDXWKRUL]HGꢀGLVWULEXWRUVꢅꢀGHDOHUVꢀRUꢀUHVHOOHUVꢀꢁꢃ$'5·VꢃꢃꢀDQGꢀꢁLLꢃꢀ
ꢀꢀꢀꢀꢀꢀORFDWHGꢌRSHUDWHGꢀLQꢀ&DQDGDꢄ
ꢁꢍꢃꢀꢀ:DUUDQWLHVꢀH[WHQGꢀRQO\ꢀWRꢀPDWHULDOꢀGHIHFWVꢀLQꢀPDWHULDOVꢀRUꢀ
ꢀꢀꢀꢀꢀꢀZRUNPDQVKLSꢀDVꢀOLPLWHGꢀDERYHꢅꢀDQGꢀGRꢀQRWꢀH[WHQGꢀWRꢉ
Dꢄ 6HUYLFHꢅꢀUHSDLUVꢀRUꢀUHSODFHPHQWꢀPDGHꢀQHFHVVDU\ꢀE\ꢀDFFLGHQWꢅ
PLVXVHꢅꢀDEXVHꢅꢀPRLVWXUHꢅꢀOLTXLGVꢅꢀGXVWꢅꢀGLUWꢅꢀQHJOHFWꢅꢀDFFLGHQWꢅꢀ
GDPDJHꢅꢀꢋꢍꢌꢎꢀDSSOLFDWLRQVꢅꢀLPSURSHUꢀLQVWDOODWLRQꢅꢀLPSURSHUꢀ
<28ꢀ0867ꢀ5($'ꢀ$1'ꢀ)2//2:ꢀ$//ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ
,16758&7,216ꢀ,1ꢀ7+(ꢀ$33/,&$%/(ꢀ86(5ꢀ*8,'(6ꢀ$1'ꢌ25ꢀ
0$18$/6ꢄꢀ,)ꢀ<28ꢀ)$,/ꢀ72ꢀ'2ꢀ62ꢅꢀ7+,6ꢀ'$9ꢀ352'8&7ꢀ0$<ꢀ
127ꢀ)81&7,21ꢀ3523(5/<ꢀ$1'ꢀ<28ꢀ0$<ꢀ68))(5ꢀ'$0$*(ꢄꢀ
7+,6ꢀ:$55$17<ꢀ:,//ꢀ127ꢀ&29(5ꢀ$1<ꢀ6(59,&(ꢀ7+$7ꢀ,6ꢀ
5(48,5('ꢅꢀ,1ꢀ3$57ꢀ25ꢀ,1ꢀ:+2/(ꢅꢀ$6ꢀ$ꢀ5(68/7ꢀ2)ꢀ$1<ꢀ
)$,/85(ꢀ72ꢀ)2//2:ꢀ7+(ꢀ6(7ꢐ83ꢀ$1'ꢀ86$*(ꢀ
,16758&7,216ꢄꢀꢀꢀ7+,6ꢀ:$55$17<ꢀ'2(6ꢀ127ꢀ$33/<ꢀ$1'ꢀ
6+$//ꢀ%(ꢀ92,'ꢀ$1'ꢀ81(1)25&($%/(ꢀ,)ꢀ7+(ꢀ'$9ꢀ
352'8&7ꢀ,6ꢀ23(1('ꢅꢀ6(59,&('ꢅꢀ25ꢀ5(3$,5('ꢀ%<ꢀ
3(56216ꢀ27+(5ꢀ7+$1ꢀ7+26(ꢀ$87+25,=('ꢀ%<ꢀ7&/ꢀ72ꢀ
6(59,&(ꢀ25ꢀ5(3$,5ꢀ7+(ꢀ'$9ꢀ352'8&7ꢄ
RSHUDWLRQꢅꢀLPSURSHUꢀFOHDQLQJꢅꢀLPSURSHUꢀPDLQWHQDQFHꢅꢀQRUPDO
ꢀ
ZHDUꢀDQGꢀWHDUꢅꢀRUꢀDQ\ꢀRWKHUꢀꢀH[WHUQDOꢀFDXVHꢀRUꢀHYHQWꢅꢀDFWꢀRU
RPLVVLRQꢀRXWVLGHꢀWKHꢀFRQWUROꢀRIꢀ7&/ꢅꢀLQFOXGLQJꢀILUHꢅꢀWKHIWꢅꢀDFWV
RIꢀ*RGꢅꢀDOWHUDWLRQꢅꢀSRZHUꢀIDLOXUHVꢅꢀSRZHUꢀVXUJHVꢀRUꢀSRZHU
VKRUWDJHVꢅꢀOLJKWQLQJꢅꢀRWKHUꢀHOHFWULFDOꢀIDXOWVꢅꢀꢀRUꢀUHSDLUVꢅꢀ
ꢀ
PRGLILFDWLRQVꢀRUꢀUHSODFHPHQWVꢀE\ꢀSHUVRQVꢀRWKHUꢀWKDQꢀWKRVH
DXWKRUL]HGꢀE\ꢀ7&/ꢀWRꢀVHUYLFHꢀWKHꢀ'$9ꢀ3URGXFWꢏ
Eꢄ 5HSODFHPHQWꢀRIꢀPLVVLQJꢅꢀGLVFDUGHGꢀRUꢀORVWꢀSDUWVꢅꢀWKHꢀ
SURYLVLRQꢀRIꢀUHWURILWVꢅꢀRUꢀSUHYHQWLYHꢀPDLQWHQDQFHꢏ
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
,)ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ)$,/6ꢀ72ꢀ:25.ꢀ$6ꢀ:$55$17('ꢀ$%29(ꢅꢀ
*HQHUDOꢀ3URYLVLRQV
<285ꢀ62/(ꢀ$1'ꢀ(;&/86,9(ꢀ5(0('<ꢀ6+$//ꢀ%(ꢀ5(3$,5ꢀ25ꢀ
5(3/$&(0(17ꢀ2)ꢀ7+(ꢀ'()(&7,9(ꢀ3$57ꢄꢀ,1ꢀ12ꢀ(9(17ꢀ:,//ꢀ
7&/ꢅꢀ726+,%$ꢀ&25325$7,21ꢅꢀ7+(,5ꢀ$)),/,$7(6ꢅꢀ$'5Vꢀ25ꢀ
$63Vꢀꢁ7+(ꢀꢃꢀ5(/$7('ꢀ3$57,(6ꢃꢀꢃꢀ%(ꢀ/,$%/(ꢀ72ꢀ<28ꢀ25ꢀ$1<ꢀ
7+,5'ꢀ3$57<ꢀ)25ꢀ$1<ꢀ'$0$*(6ꢅꢀ021(<ꢅꢀ5(,0%856(0(17ꢅꢀ
&2676ꢀ25ꢀ(;3(16(6ꢄꢀꢀ7+,6ꢀ/,0,7$7,21ꢀ$33/,(6ꢀ72ꢀ'$0$*(6ꢅꢀ
021(<ꢅꢀ5(,0%856(0(17ꢅꢀ&2676ꢀ25ꢀ(;3(16(6ꢀ2)ꢀ$1<ꢀ.,1'ꢀ
:+$762(9(5ꢀ,1&/8',1*ꢀ$1<ꢀ',5(&7ꢀ25ꢀ,1',5(&7ꢀ'$0$*(6ꢅꢀ
'$0$*(ꢀ72ꢀ3523(57<ꢀ25ꢀ3(5621ꢅꢀ/267ꢀ352),76ꢅꢀ/267ꢀ
6$9,1*6ꢅꢀ,1&219(1,(1&(ꢀ25ꢀ27+(5ꢀ63(&,$/ꢅꢀ,1&,'(17$/ꢅꢀ
(;(03/$5<ꢀ25ꢀ&216(48(17,$/ꢀ'$0$*(6ꢅꢀ:+(7+(5ꢀ)25ꢀ
%5($&+ꢀ2)ꢀ:$55$17<ꢅꢀ%5($&+ꢀ2)ꢀ&2175$&7ꢅꢀ7257ꢀ
ꢁ,1&/8',1*ꢀ1(*/,*(1&(ꢃꢅꢀ81'(5ꢀ$ꢀ67$787(ꢀ25ꢀ81'(5ꢀ$1<ꢀ
27+(5ꢀ/$:ꢀ25ꢀ)250ꢀ25ꢀ$&7,21ꢅꢀ25ꢀ:+(7+(5ꢀ$5,6,1*ꢀ287ꢀ
2)ꢀ7+(ꢀ86(ꢀ2)ꢀ25ꢀ,1$%,/,7<ꢀ72ꢀ86(ꢀ7+(ꢀ'$9ꢀ352'8&7ꢅꢀ
(9(1ꢀ,)ꢀ$1<ꢀ2)ꢀ7+(ꢀ5(/$7('ꢀ3$57,(6ꢀ+$6ꢀ%((1ꢀ$'9,6('ꢀ2)ꢀ
7+(ꢀ3266,%,/,7<ꢀ2)ꢀ68&+ꢀ'$0$*(6ꢀ25ꢀ2)ꢀ$1<ꢀ&/$,0ꢀ%<ꢀ
$1<ꢀ27+(5ꢀ3$57<ꢄꢀ
,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀ
VKRXOGꢀJHQHUDOO\ꢀEHꢀIRXQGꢀWRꢀEHꢀXQHQIRUFHDEOHꢅꢀWKHꢀ
XQHQIRUFHDEOHꢀSURYLVLRQꢀVKDOOꢀEHꢀVHYHUHGꢀIURPꢀWKHꢀZDUUDQW\ꢀ
DQGꢀGHHPHGꢀQRWꢀWRꢀIRUPꢀSDUWꢀRIꢀWKHꢀZDUUDQW\ꢄꢀꢀ7KHꢀUHPDLQLQJꢀ
SURYLVLRQVꢀRIꢀWKLVꢀZDUUDQW\ꢀVKDOOꢀEHꢀDQGꢀUHPDLQꢀYDOLGꢀDQGꢀ
HQIRUFHDEOHꢄꢀꢀ,IꢀDQGꢀWRꢀWKHꢀH[WHQWꢀWKDWꢀDQ\ꢀSURYLVLRQꢀRIꢀWKLVꢀ
OLPLWHGꢀZDUUDQW\ꢀDVꢀLWꢀUHODWHVꢀWRꢀDQ\ꢀꢀRIꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀLVꢀ
IRXQGꢀWRꢀEHꢀLQYDOLGꢀRUꢀXQHQIRUFHDEOHꢀLQꢀUHVSHFWꢀRIꢀWKDWꢀSDUW\ꢀ
ꢁWKHꢀꢃ([FOXGHGꢀ3DUW\ꢃꢀꢃꢅꢀWKHꢀ([FOXGHGꢀ3DUW\ꢀVKDOOꢀEHꢀGHHPHGꢀ
WRꢀEHꢀVHYHUHGꢀRUꢀH[FOXGHGꢀIURPꢀWKHꢀSURYLVLRQꢅꢀDQGꢀWKHꢀSURYLVLRQꢀ
VKDOOꢀUHPDLQꢀYDOLGꢅꢀHQIRUFHDEOHꢀDQGꢀDSSOLFDEOHꢀLQꢀUHVSHFWꢀRIꢀWKHꢀ
RWKHUꢀRUꢀUHPDLQLQJꢀ5HODWHGꢀ3DUWLHVꢄ
7RꢀWKHꢀH[WHQWꢀSHUPLWWHGꢀE\ꢀODZꢅꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀEHꢀ
JRYHUQHGꢀDQGꢀFRQVWUXHGꢀLQꢀDFFRUGDQFHꢀZLWKꢀWKHꢀODZVꢀRIꢀ2QWDULRꢄ
,IꢀWKHUHꢀLVꢀDQ\ꢀLQFRQVLVWHQF\ꢀEHWZHHQꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢅꢀRQꢀ
WKHꢀRQHꢀKDQGꢅꢀDQGꢀDQ\ꢀVWDWHPHQWꢀLQꢀWKHꢀSDFNDJLQJꢀRIꢀWKHꢀ'$9ꢀ
3URGXFWꢀRUꢀLQꢀDQ\ꢀRWKHUꢀGRFXPHQWꢀHQFORVHGꢀZLWKꢅꢀRUꢀXVHGꢀLQꢀWKHꢀ
FRQWH[WꢀRIꢀWKHꢀSURPRWLRQꢀRUꢀVDOHꢀRIꢅꢀWKHꢀ'$9ꢀ3URGXFWꢅꢀRQꢀWKHꢀ
RWKHUꢀKDQGꢅꢀWKHꢀSURYLVLRQVꢀRIꢀWKLVꢀOLPLWHGꢀZDUUDQW\ꢀVKDOOꢀSUHYDLOꢄ
1RꢀSHUVRQꢅꢀDJHQWꢅꢀGLVWULEXWRUꢅꢀGHDOHUꢀRUꢀFRPSDQ\ꢀLVꢀDXWKRUL]HGꢀWRꢀ
FKDQJHꢅꢀPRGLI\ꢀRUꢀH[WHQGꢀWKHꢀWHUPVꢀRIꢀWKHVHꢀZDUUDQWLHVꢀLQꢀDQ\ꢀ
PDQQHUꢀZKDWVRHYHUꢄꢀ
+RZꢀWRꢀ2EWDLQꢀ:DUUDQW\ꢀ6HUYLFHV
$UELWUDWLRQꢀDQGꢀ'LVSXWHꢀ5HVROXWLRQ
7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢅꢀDQ\ꢀFODLPꢅꢀGLVSXWHꢅꢀ
,IꢅꢀDIWHUꢀIROORZLQJꢀDOOꢀRIꢀWKHꢀRSHUDWLQJꢀLQVWUXFWLRQVꢀLQꢀWKLVꢀPDQXDOꢀ
DQGꢀFKHFNLQJꢀWKHꢀꢂ7URXEOHVKRRWLQJꢂꢀVHFWLRQꢅꢀ\RXꢀILQGꢀWKDWꢀ
VHUYLFHꢀLVꢀQHHGHGꢉ
FRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀꢁZKHWKHUꢀIRUꢀEUHDFKꢀRIꢀZDUUDQW\ꢅꢀ
EUHDFKꢀRIꢀFRQWUDFWꢅꢀWRUWꢀꢁLQFOXGLQJꢀQHJOLJHQFHꢃꢅꢀXQGHUꢀDꢀVWDWXWHꢀ
RUꢀXQGHUꢀDQ\ꢀRWKHUꢀODZꢀRUꢀIRUPꢀRIꢀDFWLRQꢃꢀDJDLQVWꢀDQ\ꢀRIꢀWKHꢀ
5HODWHGꢀ3DUWLHVꢀDULVLQJꢀRXWꢀRIꢅꢀRUꢀRWKHUZLVHꢀUHODWLQJꢀWRꢉꢀꢁLꢃꢀWKLVꢀ
ZDUUDQW\ꢏꢀꢁLLꢃꢀWKHꢀ'$9ꢀ3URGXFWꢏꢀꢁLLLꢃꢀDQ\ꢀRUDOꢀRUꢀZULWWHQꢀUHSUHVHQWDWLRQVꢅꢀ
VWDWHPHQWVꢅꢀEURFKXUHVꢅꢀSUHVVꢀUHOHDVHVꢅꢀꢀDGYHUWLVLQJꢅꢀDQQRXQFHPHQWꢅꢀ
SRLQWꢀRIꢀVDOHꢀGLVSOD\ꢅꢀRUꢀSURPRWLRQDOꢀPDWHULDOꢀUHODWLQJꢀWRꢀWKHꢀ'$9ꢀ
3URGXFWꢏꢀꢁLYꢃꢀWKHꢀUHODWLRQVKLSVꢀWKDWꢀUHVXOWꢀIURPꢀWKLVꢀZDUUDQW\ꢅꢀꢁWKHꢀ
IRUHJRLQJꢀFODLPVꢅꢀGLVSXWHVꢀFRQWURYHUVLHVꢀDQGꢀGLVDJUHHPHQWVꢀDUHꢀ
FROOHFWLYHO\ꢀUHIHUUHGꢀWRꢀDVꢀWKHꢀꢂ'LVSXWHꢂꢃꢅꢀVKDOOꢀEHꢀUHIHUUHGꢀWRꢀDQGꢀ
UHVROYHGꢀE\ꢀILQDOꢀDQGꢀELQGLQJꢀDUELWUDWLRQꢀꢁWRꢀWKHꢀH[FOXVLRQꢀRIꢀWKHꢀ
FRXUWVꢃꢄꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀODZꢅꢀ\RXꢀDJUHHꢀWRꢀZDLYHꢀDQ\ꢀ
ULJKWꢀWKDWꢀ\RXꢀPD\ꢀKDYHꢀWRꢀFRPPHQFHꢀRUꢀSDUWLFLSDWHꢀLQꢀDQ\ꢀ
UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJꢀDJDLQVWꢀWKHꢀ5HODWHGꢀ3DUWLHVꢀ
UHODWLQJꢀWRꢀDQ\ꢀ'LVSXWHꢄꢀꢀ,IꢀDQGꢀZKHUHꢀDSSOLFDEOHꢀDQGꢀWRꢀWKHꢀH[WHQWꢀQRWꢀ
SUHFOXGHGꢀE\ꢀODZꢅꢀ\RXꢀIXUWKHUꢀDJUHHꢀWRꢀRSWꢀRXWꢀRIꢀDQ\ꢀVXFKꢀ
UHSUHVHQWDWLYHꢀRUꢀFODVVꢀSURFHHGLQJVꢄꢀꢀ$UELWUDWLRQꢀRIꢀDQ\ꢀ'LVSXWHꢀZLOOꢀ
EHꢀFRQGXFWHGꢀLQꢀWKHꢀIRUXPꢀDQGꢀLQꢀWKHꢀPDQQHUꢀDVꢀDJUHHGꢀWRꢀEHWZHHQꢀ
\RXꢀDQGꢀ7&/ꢄꢀꢀ)DLOLQJꢀVXFKꢀDJUHHPHQWꢅꢀWKHꢀDUELWUDWLRQꢀZLOOꢀEHꢀ
FRQGXFWHGꢀE\ꢀRQHꢀDUELWUDWRUꢀSXUVXDQWꢀWRꢀWKHꢀODZVꢀDQGꢀUXOHVꢀUHODWLQJꢀ
WRꢀDUELWUDWLRQꢀJHQHUDOO\ꢀLQꢀIRUFHꢀLQꢀWKHꢀMXULVGLFWLRQꢀLQꢀZKLFKꢀ\RXꢀUHVLGHꢀ
DWꢀWKHꢀWLPHꢀWKDWꢀWKHꢀ'LVSXWHꢀDULVHVꢄꢀꢀ7RꢀWKHꢀH[WHQWꢀQRWꢀSUHFOXGHGꢀE\ꢀ
ODZꢅꢀQRꢀFODLPꢅꢀGLVSXWHꢅꢀFRQWURYHUV\ꢀRUꢀGLVDJUHHPHQWꢀRIꢀDQ\ꢀRWKHUꢀ
SHUVRQꢀPD\ꢀEHꢀMRLQHGꢀRUꢀFRPELQHGꢀZLWKꢀDQ\ꢀ'LVSXWHꢀE\ꢀ\RXꢅꢀZLWKRXWꢀ
WKHꢀSULRUꢀZULWWHQꢀFRQVHQWꢀRIꢀ7&/ꢄꢀꢀꢀ
ꢁꢆꢃꢀꢀꢀ7RꢀILQGꢀWKHꢀQHDUHVWꢀ$63ꢅꢀYLVLWꢀ7&/·VꢀZHEꢀVLWHꢀDWꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀZZZꢄWRVKLEDꢄFDꢅꢀRUꢀFDOOꢀWROOꢀIUHHꢀꢆꢐꢑꢈꢈꢐꢋꢒꢑꢐꢇꢍꢈꢍꢄꢀ
ꢁꢋꢃꢀꢀꢀ3UHVHQWꢀ\RXUꢀELOOꢀRIꢀVDOHꢀRUꢀRWKHUꢀSURRIꢀRIꢀSXUFKDVHꢀWRꢀWKHꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀ$63ꢄꢀ
)RUꢀDGGLWLRQDOꢀLQIRUPDWLRQꢅꢀYLVLWꢀ7&/ꢓVꢀZHEVLWHꢀDWꢀZZZꢄWRVKLEDꢄFD
&ULWLFDOꢀ$SSOLFDWLRQV
7KHꢀ'$9ꢀ3URGXFWꢀ\RXꢀKDYHꢀSXUFKDVHGꢀLVꢀQRWꢀGHVLJQHGꢀIRUꢀDQ\ꢀ´FULWLFDOꢀ
DSSOLFDWLRQVꢄµꢀ´&ULWLFDOꢀDSSOLFDWLRQVµꢀPHDQVꢀOLIHꢀVXSSRUWꢀV\VWHPVꢅꢀ
PHGLFDOꢀDSSOLFDWLRQVꢅꢀFRQQHFWLRQVꢀWRꢀLPSODQWHGꢀPHGLFDOꢀGHYLFHVꢅꢀ
FRPPHUFLDOꢀWUDQVSRUWDWLRQꢅꢀQXFOHDUꢀIDFLOLWLHVꢀRUꢀV\VWHPVꢀRUꢀDQ\ꢀRWKHUꢀ
DSSOLFDWLRQVꢀZKHUHꢀ'$9ꢀ3URGXFWꢀIDLOXUHꢀFRXOGꢀOHDGꢀWRꢀLQMXU\ꢀWRꢀSHUVRQV
ꢀ
RUꢀORVVꢀRIꢀOLIHꢀRUꢀFDWDVWURSKLFꢀSURSHUW\ꢀGDPDJHꢄ
,)ꢀ7+(ꢀ&86720(5ꢀ86(6ꢀ7+(ꢀ'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ
$33/,&$7,21ꢅꢀ7+(ꢀ&86720(5ꢀ²ꢀ$1'ꢀ127ꢀ7&/ꢅꢀ,76ꢀ$)),/,$7(6ꢅꢀ
$'5Vꢀ25ꢀ$63Vꢀ²ꢀ$6680(ꢀ62/(ꢀ$1'ꢀ)8//ꢀ5(63216,%,/,7<ꢀ)25ꢀ
68&+ꢀ86(ꢄꢀꢀ7&/ꢀ5(6(59(6ꢀ7+(ꢀ5,*+7ꢀ72ꢀ5()86(ꢀ72ꢀ6(59,&(
$1<ꢀ'$9ꢀ352'8&7ꢀ86('ꢀ,1ꢀ$ꢀ&5,7,&$/ꢀ$33/,&$7,21ꢄꢀꢀ7&/ꢅꢀ,76ꢀ
$)),/,$7(6ꢅꢀ$'5Vꢀ$1'ꢀ$63Vꢀ+(5(%<ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ
/,$%,/,7<ꢅꢀ'$0$*(6ꢀ$1'ꢀ&216(48(1&(6ꢀ$5,6,1*ꢀ287ꢀ2)ꢀ7+(ꢀ
6(59,&(ꢀ25ꢀ5()86$/ꢀ72ꢀ6(59,&(ꢀ68&+ꢀ'$9ꢀ352'8&7ꢀ$1'ꢀ
)857+(5ꢀ',6&/$,0ꢀ$1<ꢀ$1'ꢀ$//ꢀ/,$%,/,7<ꢅꢀ&216(48(1&(6ꢀ$1'ꢀ
'$0$*(6ꢀ7+$7ꢀ0$<ꢀ$5,6(ꢀ25ꢀ5(68/7ꢀ)520ꢀ7+(ꢀ86(ꢀ2)ꢀ7+(ꢀ
'$9ꢀ352'8&7ꢀ,1ꢀ$1<ꢀ&5,7,&$/ꢀ$33/,&$7,216ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
1VMN31873/E9PKCCD
Printed in Chine
★★★★★
*
1
V
M
N
3
1
8
7
3
*
Download from Www.Somanuals.com. All Manuals Search And Download.
|