Introduction
Connections
2
18
26
34
48
58
DIGITAL VIDEO
Basic playback
DVD VIDEO PLAYER
Advanced
playback
S D-K5 1 0
OW NER’S MANUAL
Function setup
Others
79077224
PM0005171011
S
©2002 Toshiba Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilat-
WARNING
eral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclo-
sure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE
AVIS
PAS OUVRIR
WARNING :
TO REDUCE THE RISK OF
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USERSERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The symbol for CLASS II (Double Insulation)
WARNING:
CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL
ONLY.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LABORNE CORRESPONDANTE DE LAPRISE ET POUSSER JUSQU’AU FOND.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for
future reference. Should the unit require maintenance, contact an authorized service location -
see service procedure.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user’s authority to operate the equipment.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in
each pole shall be incorporated in the electrical installation of the building.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video
player.
Model No.
Serial No.
Retain this information for future reference.
Location of the required label
PRODUCT IS CERTIFIED BY THE MANUFACTURER TO
COMPLY WITH DHHS RULE 21 CFR SUBCHAPTER J
APPLICABLE AT THE DATE OF MANUFACTURE.
MANUFACTURED
1-1,SHIBAURA 1-CHOME,MINATO-KU.
TOKYO 105-8001,JAPAN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that
can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
IMPORTANT SAFETY INSTRUCTIONS
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15.When you use headphones, keep the volume at a moderate level. If you use the headphones continuously
with high volume sound, it may cause hearing damage.
16.Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a
risk of fire or electric shock.
17.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
18.Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal
injury.
19.Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal
injury and serious damage to the apparatus.
20.Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
Notes on handling
Notes on moisture condensation
When shipping the DVD video player, the original
shipping carton and packing materials come in handy.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD video player. Do not leave rubber or plastic
products in contact with the DVD video player for a
long time. They will leave marks on the finish.
The top and rear panels of the DVD video player may
become warm after a long period of use. This is not a
malfunction.
Moisture condensation damages the DVD video
player. Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the DVD video player.
o
f
n
s
When the DVD video player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD video player for a long
period, the unit may not function properly in the
future. Turn on and use the DVD video player
occasionally.
Optical pick-up
lens
Moisture condensation occurs during the
following cases.
When you bring the DVD video player directly from a
cold place to a warm place.
Notes on locating
When you use the DVD video player in a room where
you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
In summer, when you use the DVD video player in a
hot and humid place just after you move the unit from
an air conditioned room.
Place the DVD video player on a level surface. Do not
use it on a shaky or unstable surface such as a
wobbling table or inclined stand. The loaded disc may
come off the proper position and cause damage to
the DVD video player.
When you place this DVD video player near a TV,
radio, or VCR, the playback picture may become poor
and the sound may be distorted. In this case, place
the DVD video player away from the TV, radio, or
VCR.
When you use the DVD video player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry.
Do not use the DVD video player when moisture
condensation may occur.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
video player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
If you use the DVD video player in such a situation, it
may damage discs and internal parts. Remove the
disc, connect the power cord of the DVD video player
to the wall outlet, turn on the DVD video player, and
leave it for two or three hours. After two or three
hours, the DVD video player will have warmed up and
evaporated any moisture. Keep the DVD video player
connected to the wall outlet and moisture
To obtain a clear picture
condensation will seldom occur.
The DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn down, the picture quality becomes
poor. To obtain a clear picture, we recommend regular
inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on
the operating environment. For details, contact your
nearest dealer.
Wall outlet
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
On handling discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
DVD video disc
DVD video disc
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes on Discs (continued)
About this owner’s manual
Playable discs
This owner’s manual explains the basic instructions of
this DVD video player. Some DVD video discs are
produced in a manner that allows specific or limited
operation during playback. As such, the DVD video
player may not respond to all operating commands. This
is not a defect in the DVD video player. Refer to
instruction notes of discs.
This DVD video player can play the following discs.
Maximum
playback time
Disc
Size
Disc Mark
Contents
Approx. 4 hours
(single sided disc)
12 cm
Audio
+
video
(moving
pictures)
Approx. 8 hours
(double sided disc)
“
” may appear on the TV screen during operation.
DVD
video
discs
A “ ” means that the operation is not permitted by the
DVD video player or the disc.
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Notes on region numbers
The region number of this DVD video player is 1. If
region numbers, which stand for their playable area, are
Approx. 74 minutes
Approx. 20 minutes
12 cm
1
printed on your DVD video disc and you do not find
Audio
+
video
(moving
pictures)
ALL
or
, disc playback will not be allowed by the player.
VIDEO
CDs
(In this case, the DVD video player will display a
message on-screen.)
DIGITAL VIDEO
8 cm
On VIDEO CDs
Approx. 74 minutes
Approx. 20 minutes
12 cm
This DVD video player supports VIDEO CDs equipped
with the PBC (Version 2.0) function. (PBC is the
abbreviation of Playback Control.) You can enjoy two
playback variations depending on types of discs.
Audio
CDs
Audio
8 cm
(CD
single)
• VIDEO CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD video
player in the same way as an audio CD.
• VIDEO CD equipped with PBC function
(Version 2.0)
The following discs are also available.
DVD-R discs of DVD video format
CD-R/CD-RW discs of CD-DA or VIDEO CD format
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or
non-standardized discs, etc., even if they may be
labeled as above.
• This DVD video player uses the NTSC color system,
and cannot play DVD video discs recorded in any
other color system (PAL, SECAM, etc.).
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Advanced playback
SAFETY PRECAUTIONS ..........................2
IMPORTANT SAFETY INSTRUCTIONS ...4
Precautions ...............................................8
Notes on Discs..........................................9
Notes on region numbers ............................... 10
Accessing a Specific Location Directly ... 34
Entering the time counter of the desired
location ......................................................... 34
Playing Repeatedly.................................35
Repeating a title, chapter, or track .................. 35
Repeating a specific segment ........................ 35
Table of Contents ................................... 11
Playing in a Favorite Order ....................36
Identification of Controls .......................12
Front panel ..................................................... 12
Rear panel ...................................................... 12
DVD display.................................................... 13
Remote control ............................................... 14
Loading batteries ............................................ 15
Operating with the remote control .................. 15
Setting titles, chapters, or tracks in a favorite
order ............................................................. 36
Playing in Random Order ......................37
Playing titles, chapters or tracks in random
order ............................................................. 37
Zooming a Picture ..................................38
Zooming a picture........................................... 38
Selecting the Picture Enhancement
(E.P.M.) .....................................................39
Selecting the picture enhancement ................ 39
Connections
Connecting to a TV .................................18
Connecting to a TV......................................... 18
Connecting to an audio system and TV
equipped with component video inputs ........ 19
Selecting the Sound Enhancement
(E.A.M.) ....................................................40
Selecting the sound enhancement ................. 40
Connecting to Optional Equipment ......20
Connecting to an amplifier equipped with a
Dolby Digital decoder ................................... 21
Selecting the Camera Angle ..................41
Changing the camera angle ........................... 41
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ............................ 21
Connecting to an amplifier equipped with a
DTS decoder ................................................ 22
Connecting to an amplifier equipped with an
MPEG2 audio decoder ................................. 22
Connecting to an amplifier equipped with a
Selecting Subtitles .................................42
Selecting a subtitle language ......................... 42
Selecting a Language.............................43
Selecting a playback audio setting ................. 43
On-screen Display Operation ................44
On-screen display operation........................... 44
digital audio input ......................................... 23
Function setup
Customizing the Function Settings ......48
Setting procedure ........................................... 48
Setting details ................................................. 50
Basic playback
Playing a Disc .........................................26
Basic playback................................................ 26
Table of Languages ................................56
Variable Speed Playback .......................28
Playing in fast reverse or fast forward
directions ...................................................... 28
Playing frame by frame................................... 28
Playing in slow-motion .................................... 29
Resuming playback from the same location ... 29
Others
Before Calling Service Personnel .........58
Specifications .........................................59
LIMITED WARRANTY DVD VIDEO
PLAYER ...................................................60
Locating a Desired Section ...................30
Locating a title using the top menu................. 30
Locating a desired section by entering the
corresponding number ................................. 31
Locating a specific chapter or track ................ 31
Playing an MP3 Encoded CD .................32
Playing an MP3 encoded CD ......................... 32
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
See the page in
for details.
Front panel
DVD display
13
PLAY button
Disc tray
26
ON/STANDBY indicator
26
26
ON/STANDBY
OPEN/CLOSE
SKIP
PAUSE
STOP
PLAY
Remote sensor
OPEN/CLOSE button
15
26
STOP button
27
ON/STANDBY button
SKIP buttons
26
31
PAUSE button
27
Rear panel
18
VIDEO OUT jack
VIDEO OUT (Y/PB/PR)
(Component video) jacks
19
VIDEO
Y
PB
PR
VIDEO OUT
AUDIO OUT
R
L
COAXIAL
ANALOG BITSTREAM/PCM
DIGITAL
S
BITSTREAM/PCM DIGITAL COAXIAL
21 22 23
Power cord
AUDIO OUT jack
ANALOG AUDIO OUT (L/R) jacks 18 19
S VIDEO OUT jack
18
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing of the FL DIM button on the remote
control changes the brightness of the display.
DVD display
FL DIM
Dimmed
Normal
Off
Total playing time indicator
Chapter number indicator
Memory playback indicator
Play mode indicator
Title number indicator
Track number
indicator
Random playback indicator
-
TITLE
TOTAL
CHP TRK
M R
A B
DVD
VCD
Multifunctional indicator (indicates operating status or
messages, etc.)
Angle icon indicator
DVD/VIDEO CD/CD indicator
Repeat playback indicator
When you start playback, the elapsed time indicators appear. Pressing the FL SELECT button switches
them to the title/chapter/track number indicators. Some discs may not permit this operation.
The indicators vary depending on the kinds of discs you play.
DVD video disc
VIDEO CD
Audio CD
• During playback:
• During playback:
• During playback:
Example
Example
Example
TRK
TITLE
CHP
TRK
DVD
CD
VCD
Playing track 6
Playing track 6
Playing chapter 3 of title 2
Some discs may not display track
numbers or elapsed time.
Some discs may not display chapter
numbers or elapsed time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls (continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
OPEN/CLOSE
OPEN/CLOSE button 26
Power button 26
REV
FWD
SKIP
REV button 28
FWD button 28
SKIP buttons 31
PAUSE/STEP
TOP MENU
STOP
PLAY
PLAY button 26
ENTER button 48
PAUSE/STEP button 27 28
STOP button
27
MENU
MENU button*
TOP MENU button 30
Direction buttons 48
ENTER
(
/
/
/
)
RETURN
CLEAR
ANGLE
CLEAR button 31
RETURN button 48
SUBTITLE
AUDIO
ANGLE button 41
AUDIO button 43
SETUP DISPLAY ZOOM
SLOW
SLOW button 29
SETUP button 48
ZOOM button 38
DISPLAY button 44
FL DIM
E.P.M. FL SELECT
E.A.M.
FL DIM button
FL SELECT button
13
SUBTITLE button
E.A.M. button 40
E.P.M. button 39
42
SEARCH
13
1
4
7
2
5
8
3
6
T
T button 31
+10
Number buttons 31
9
0
RANDOM MEMORY
A-B RPT
REPEAT
RANDOM button 37
A-B RPT button
35
MEMORY button 36
REPEAT button 35
* MENU button
Use the MENU button to display the menu included on
many DVD video discs. To operate a menu, follow the
instructions in “Locating a title using the top menu.”
30
14
Download from Www.Somanuals.com. All Manuals Search And Download.
About the illustrations of the battery compartment
There are two types of battery compartment in the
supplied remote controls. (This does not mean a
difference in performance between the two.)
Refer to either illustration depending on the actual
remote control.
Loading batteries
Operating with the remote control
Open the cover.
Point the remote control at the remote
sensor and press the buttons.
1
2
1
30°
30°
Within about 7 m (23 feet)
Insert batteries (AA size).
2
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct
sunlight or other illumination. If you do so, you may
not be able to operate the DVD video player via the
remote control.
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Close the cover.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
3
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not open the remote control.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage from
battery corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Read this chapter first to make all necessary
preparations.
Connecting to a TV
Connecting to an audio system
and TV equipped with
component video inputs
Connecting to an amplifier
equipped with a Dolby Digital
decoder
Connecting to an amplifier
equipped with Dolby Surround
Pro Logic
Connecting to an amplifier
equipped with a DTS decoder
Connecting to an amplifier
equipped with an MPEG2 audio
decoder
Connecting to an amplifier
equipped with a digital audio
input
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 43
.
Connecting to a TV
Signal flow
VIDEO
Y
PB
PR
VIDEO OUT
AUDIO OUT
R
L
COAXIAL
ANALOG BITSTREAM/PCM
DIGITAL
S
To S VIDEO
OUT
(yellow) (red) (white)
To wall outlet
To VIDEO
OUT
To ANALOG AUDIO OUT
Audio/video cable (supplied)
To audio inputs
To video input
(yellow)
(red)
(white)
To S video input
S video cable (not supplied)
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable.
TV or monitor with
audio/video inputs
• Make the following setting.
On-screen display
Select:
Page
48
50
“Audio Out Select” “Analog 2ch”
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an audio system and TV equipped with component video inputs
Signal flow
VIDEO
Y
P
B
PR
VIDEO OUT
AUDIO OUT
L
COAXIAL
ANALOG BITSTREAM/PCM
DIGITAL
S
(red)
(white)
To wall outlet
To PR
VIDEO VIDEO VIDEO
OUT OUT
OUT
To PB
To Y
To ANALOG AUDIO OUT
To audio inputs of
the amplifier
(red)
(white)
To Y video input
To PB video input
To PR video input
Audio system
TV or monitor with
component video inputs
Component video (ColorStream®) outputs/inputs
• Make the following setting.
Some TVs or monitors are equipped with component video inputs. Connecting to
these inputs allows you to enjoy higher quality picture playback.
Actual labels for component video inputs may vary depending on the TV
manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
On-screen display
Select:
Page
48
50
“Audio Out Select” “Analog 2ch”
In some TVs or monitors, the color levels of the playback picture may be reduced
slightly or the tint may change. In such a case, adjust the TV or monitor for
optimum performance.
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the
DVD video player away from the tuner and radio.
• The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power
on, the speakers may be damaged.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
• For connection to your TV, see “Connecting to a TV”
Warning
18 19
.
• When you are connecting (via the BITSTREAM/PCM
AUDIO OUT jack) an AV decoder that does not have
Dolby Digital, Digital Theater Systems (DTS) or MPEG2
decoding function, be sure to set “Audio Out Select” to
43
• For details of output sound, see
.
• This section uses the following reference marks.
48 50
“PCM” from the on-screen displays
. Otherwise,
: Front speaker
: Rear speaker
: Sub woofer
high volume sound may damage your hearing as well
as the speakers.
• When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog audio
output jacks. To avoid possible damage to the audio
system, you should take proper precautions when the
analog audio output jacks of the DVD video player are
connected to an amplification system. To enjoy DTS
Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the BITSTREAM/PCM AUDIO OUT jack of
the DVD video player.
: Center speaker
: Signal flow
Notes
• DO NOT connect the BITSTREAM/PCM AUDIO OUT jack
of the DVD video player to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V Receiver is
reserved for Laserdisc use only and is incompatible with
the BITSTREAM/PCM AUDIO OUT jack of the DVD video
player.
• Connect the BITSTREAM/PCM AUDIO OUT jack of the
DVD video player to the “DIGITAL (COAXIAL)” input of a
Receiver or Processor.
• Refer to the owner’s manual of the connected equipment
as well.
• When you connect the DVD video player to other
equipment, be sure to turn off the power and unplug all of
the equipment from the wall outlet before making any
connections.
• The output sound of the DVD video player has a wide
dynamic range. Be sure to adjust the receiver’s volume to
a moderate listening level. Otherwise, the speakers may
be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD video player’s power cord. If you leave the amplifier
power on, the speakers may be damaged.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Manufactured under license from Dolby
Laboratories. “Dolby” “Pro Logic” and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
VIDEO
Y
PB
PR
Amplifier equipped with a
Dolby Digital decoder
VIDEO OUT
AUDIO OUT
On-screen display
Select:
Page
R
L
COAIAL
S
ANALOG BITSTREAM/PCM
DIGITAL
48
50
“Audio Out Select” “Bitstream”
To COAXIAL type
digital audio input
To BITSTREAM/
PCM AUDIO OUT
Recording system
D
43
75 Ω coaxial cable
Connecting to an amplifier equipped with Dolby Surround Pro Logic
• Make the following setting.
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
On-screen display
Select:
Page
48
50
“Audio Out Select” “Analog 2ch”
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an
amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s
owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.
Be sure to set “Audio Out Select”
to “Analog 2ch” when you enjoy
sounds of Dolby Surround Pro
Logic using this connection.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
VIDEO
Y
P
B
PR
Amplifier equipped with
VIDEO OUT
AUDIO OUT
*
Dolby Surround Pro Logic
R
COAXIAL
S
ANALOG BITSTREAM/PCM
DIGITAL
To audio input
To ANALOG
AUDIO OUT
Audio cable
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVD video discs or audio CDs.
“DTS” and “DTS Digital Out” are
trademarks of Digital Theater Systems,
Inc.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVD video discs or audio CDs.
• Use DVD video discs or audio
CDs encoded via the DTS
recording system.
• Make the following setting.
VIDEO
Y
P
B
PR
Amplifier equipped with
a DTS decoder
VIDEO OUT
AUDIO OUT
On-screen display
“Audio Out Select” “Bitstream”
Recording system DTS
Select:
Page
R
L
COAIAL
S
ANALOG BITSTREAM/PCM
DIGITAL
48
50
To COAXIAL type
digital audio input
To BITSTREAM/
PCM AUDIO OUT
43
75 Ω coaxial cable
Connecting to an amplifier equipped with an MPEG2 audio decoder
• Use DVD video discs encoded via
the MPEG2 recording system.
• Make the following setting.
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs with
dynamic realistic sound by connecting an amplifier equipped with an
MPEG2 audio decoder or MPEG2 audio processor.
On-screen display
Select:
Page
48
50
“Audio Out Select” “Bitstream”
VIDEO
Y
P
B
PR
Amplifier equipped with an
MPEG2 audio decoder
VIDEO OUT
AUDIO OUT
R
L
COAAL
S
ANALOG BITSTREAM/PCM
DIGITAL
Recording system
MPEG2
43
To COAXIAL type
digital audio input
To BITSTREAM/
PCM AUDIO OUT
75 Ω coaxial cable
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
• Make the following setting.
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers).
On-screen display
Select:
Page
48
50
“Audio Out Select”
“PCM”
VIDEO
Y
PB
PR
Amplifier equipped with
a digital audio input
VIDEO OUT
AUDIO OUT
R
L
COAIAL
ANALOG BITSTREAM/PCM
DIGITAL
S
To COAXIAL type
digital audio input
To BITSTREAM/
PCM AUDIO OUT
75 Ω coaxial cable
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
Begin your operation.
Playing a Disc
Variable Speed Playback
Locating a Desired Section
Playing an MP3 Encoded CD
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Playing a Disc
This section shows you the basics on how to play a disc.
ON/STANDBY indicator
STOP PLAY
3
2
,
4
ON/STANDBY
OPEN/CLOSE
SKIP
PAUSE
STOP
PLAY
PAUSE
1
DVD
VCD
CD
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
Press the power button (ON/STANDBY).
Press OPEN/CLOSE to close the disc
4tray.
1
The DVD video player turns on.
The ON/STANDBY indicator on the
player illuminates.
Playback starts.
OPEN/CLOSE
When the DVD video player is turned on for
the first time, a message appears. Press
ENTER, and make the proper settings before
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
proceeding to step 2.
55
using the top menu.”
30
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD video disc.)
Press OPEN/CLOSE.
2
3
The disc tray opens.
OPEN/CLOSE
Note
If the disc tray contains a disc you have already played,
playback will begin from the location where you last stopped
playback.
29
Place the disc on the disc tray.
To start playback in the stop mode
Press PLAY.
With the playback
side down
PLAY
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD video player to malfunction.
• Do not place a disc which is unplayable in this DVD
video player.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain a higher quality picture
2, 4
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD video player, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
1
PAUSE/STEP
PLAY
STOP
MENU
ENTER
/
DVD VCD
CD
About
DVD VCD
CD
The
icons on the heading bar show the playable discs for the
function described under that heading.
DVD
: You can use this function with DVD video discs.
: You can use this function with VIDEO CDs.
: You can use this function with audio CDs.
TOP MENU
VCD
CD
To pause playback (still mode)
About the screen saver
Press PAUSE/STEP during playback.
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the DVD video
player automatically appears (when “Screen Saver” is
set to “On” 53 ). To turn off the screen saver, press the
PLAY button.
PAUSE/STEP
To resume normal playback, press
the PLAY button.
• The sound is muted during still
mode.
Automatic Power Off function
To stop playback
Press STOP.
If the DVD video player is stopped, or the screen saver
is engaged for approximately 20 minutes, the DVD
video player will automatically turn itself off.
STOP
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
OPEN/CLOSE
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes
• Do not move the DVD video player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD video player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video
player to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the
STOP button on your remote control once the movie is completed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
REV
Variable Speed Playback
FWD
You can play discs at various speeds, and resume playback from the location
where you stopped playback.
PLAY
STOP
PAUSE/STEP
SLOW
DVD
VCD
CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FWD during playback.
PLAY
REV
FWD
REV: Fast reverse playback
FWD: Fast forward playback
Notes
Each time you press the REV or
FWD button, the playback speed
changes.
• The DVD video player mutes sound and subtitles during
reverse and forward scan of DVD video discs. However, the
DVD video player plays sound during fast forward or fast
reverse play of audio CDs.
• The playback speed may differ depending on the disc.
DVD
VCD
Playing frame by frame
To resume normal playback
Press PLAY.
Press PAUSE/STEP during still playback.
PLAY
PAUSE/STEP
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
Note
The sound is muted during frame by frame playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
VCD
Playing in slow-motion
To resume normal playback
Press PLAY.
Press SLOW during playback.
SLOW
PLAY
Each time you press the SLOW
button, the slow-motion speed
changes.
Note
The sound is muted during slow-motion playback.
DVD
VCD
CD
Resuming playback from the same location
To start playback from the beginning regardless
of the location where you stopped playback
1 Press STOP twice.
Press STOP at the location where you
want to interrupt playback.
1
2
STOP
The DVD video player memorizes
STOP
The DVD video player effaces the
the location where playback is
stopped.
memory of the location.
2 Press PLAY.
Press PLAY.
PLAY
DVD
Playback starts from the
beginning of the current title.
PLAY
The DVD video player resumes
VCD
CD
Playback starts from the
beginning of the disc.
playback from the location where
you stopped playback.
• If you want to return to the beginning of a DVD video
disc, open and close the disc tray once with the
OPEN/CLOSE button before pressing the PLAY
button.
Notes
• Resuming cannot function when:
–you change the parental lock setting 53 or select a disc
51
menu language
.
55
–you play a PBC-featured VIDEO CD while “PBC”
to “On”.
is set
–you open the disc tray.
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while the
DVD video player keeps a location in the memory may
function only after the memory is cleared.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
TOP MENU
Locating a Desired Section
/
/
/
ENTER
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD video disc
Title 1
Title 2
VIDEO CD/audio CD
Chapter 1 Chapter 2
Chapter 1 Chapter 2 Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
DVD
Locating a title using the top menu
Press TOP MENU.
Press ENTER.
1
3
TOP MENU
The top menu appears on the TV
screen.
Playback starts from chapter 1 of the
selected title.
ENTER
e.g.
TITLE 1
TITLE 3
TITLE 2
TITLE 4
Notes
• The instructions above describe basic procedures which
may vary depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
• If you display the top menu during playback and press the
TOP MENU button again without selecting any title, the DVD
video player may resume playback from the point where you
first pressed the TOP MENU button (depending on the actual
DVD video disc.)
Press
want.
/
/
/
to select the title you
2
If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.
ENTER
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that
displays the top menu as TITLE button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SKIP
PLAY
/
/
/
ENTER
CLEAR
T
Number buttons
DVD
VCD
CD
Locating a desired section by entering the corresponding number
Press T.
Repeat steps 2 and 3 if necessary.
1
4
5
If you are using a VIDEO CD/audio CD, skip step 2.
Then at step 3, enter the number for the track you
want using the number buttons.
Press PLAY or ENTER.
e.g.
SEARCH
PLAY
–
:
––:––
1
1
Playback starts from
the selected section.
T
ENTER
Press
/
to select a section you want
to locate.
2
3
e.g. When you want to locate a chapter.
Notes
• Pressing the CLEAR button resets the numbers. To clear the
display, press the T button several times.
• This method of locating a title is available only on a disc that
contains title numbers.
ENTER
–
:
––:––
1
1
Press
section.
/
to enter a number of the
Also the number buttons are
available.
ENTER
e.g. To enter 25
+10
+10
5
2
5
or
DVD
VCD
CD
Locating a specific chapter or track
Notes
Press SKIP
or
repeatedly to display
• Some titles may not display chapter numbers.
• If you press and hold the SKIP or button on the front
panel during playback, the DVD video player performs fast
reverse or fast forward playback. You can vary the speed by
pressing the button repeatedly.
the chapter or track number you want.
Playback starts from the selected chapter or track.
SKIP
To locate succeeding chapters or
To locate chapters or tracks during fast reverse or fast
forward playback, first press the PLAY button to resume
tracks.
SKIP
normal playback, then use the SKIP
or
button.
Playback starts from the beginning of
• When you set “Title Stop” to “Off” 55 , you can access
chapters in another title. If you go back to the preceding title
the current chapter or track.
When you press twice, playback starts
from the beginning of the preceding
chapter or track.
by pressing the SKIP
button, the DVD video player
locates the first chapter of the title. When “Title Stop” is set
to “On,” you can access chapters only within the current title.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic playback
2
Playing an MP3 Encoded CD
PAUSE/STEP
PLAY
You can play MP3 files on this DVD video player.
3
/
/
/
ENTER
DISPLAY
Playing an MP3 encoded CD
MP3 disc compatible with this player is limited as follows:
• Playable discs: CD-ROM, CD-R (650MB / 74 min. only)
* CD-RW is not recommendable.
• Sampling Frequency: 44.1 kHz only
• Bit rate 32 kbps-320 kbps
• CD physical format: Mode 1, Mode 2 XA Form 1
• File system: ISO9660 Level 1
• File names are limited to eight characters or less and must incorporate “MP3” extension.
e.g.“********.MP3”
• File names cannot contain special characters such as “?!><+*}{`[@]:;\ /.,” etc.
• Total number of files on the disc should not exceed 254.
Notes
Place a CD that contains MP3 files on
the disc tray.
• Some discs may not permit this operation.
• If you stop playback by pressing the STOP button, and then
press the PLAY button, playback will start from the beginning
of the track.
1
2
31
35
37
and RANDOM functions
• The SKIP
, REPEAT
are also available.
Press OPEN/CLOSE to load the disc.
Playback starts.
OPEN/CLOSE
To stop playback, press STOP.
3
STOP
To pause playback
Press PAUSE/STEP during playback.
This DVD video player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types of
recordable disc formats (including CD-R containing MP3
files). Given the fact that technology in this area is still
maturing, Toshiba cannot guarantee that all genre of
recordable discs will produce optimal playback quality.
The technical criteria set out in this owner’s manual are
meant as a guide only.
PAUSE/STEP
To resume normal playback, press the
PLAY button.
Selecting a track (file) in the disc
1 Press the DISPLAY button.
2 Select the MP3 icon using the
press the ENTER button.
A list of tracks appears.
/
buttons then
3 Press the
want to play.
The current track being played is highlighted in
green.
4 Press the ENTER button to begin playback of the
selected track.
/
/
/
buttons to select a track you
Customers should also note that permission is required
in order to download MP3 files and music from the
internet. Toshiba has no right to grant such permission.
Permission should always be sought from the copyright
owner.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Customizing the performance of your DVD video player.
Accessing a Specific Location
Directly
Playing Repeatedly
Playing in a Favorite Order
Playing in Random Order
Zooming a Picture
Selecting the Picture
Enhancement (E.P.M.)
Selecting the Sound
Enhancement (E.A.M.)
Selecting the Camera Angle
Selecting Subtitles
Selecting a Language
On-screen Display Operation
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Accessing a Specific Location Directly
You can access a specific location by entering its corresponding time (hours,
minutes, seconds).
3
3
1
2
DVD
VCD
CD
Entering the time counter of the desired location
Notes
Press T several times.
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or within
the current track of the VIDEO CD/audio CD.
1
2
3
SEARCH
You may have to press further
T
depending on the disc. Press the
button repeatedly until the clock icon
is highlighted.
e.g.
–
:
––:––
1
1
Press the number buttons to enter the
time.
e.g.
1
2
5
3
0
:
:
1
1
1 25 30
Press PLAY or ENTER.
PLAY
Playback starts from
the desired location.
ENTER
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Repeatedly
You can play a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
PLAY
CLEAR
REPEAT
A-B RPT
DVD
VCD
CD
Repeating a title, chapter, or track
Press REPEAT.
Press PLAY.
1
2
REPEAT
PLAY
Each time you press the REPEAT
button, the repeat mode changes as
follows.
The DVD video player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.
Chapter Repeat
DVD
Chapter Repeat Repeats the current
chapter.
To resume normal playback
Press CLEAR.
DVD Title Repeat
Repeats the current
title.
Repeats the current
track.
CLEAR
VCD
CD
Track Repeat
DVD
VCD
CD
Note
All Repeat
Repeats the entire
disc.
Some discs may not permit repeat operation.
Repeat Off
Resumes normal
playback.
DVD
VCD
CD
Repeating a specific segment
To resume normal playback
Press CLEAR.
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
1
2
CLEAR
A-B RPT
A–
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles 41
• You can specify a segment only within the current title or
track (VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
.
Press A-B RPT again at the end of the
segment (point B).
The DVD video player automatically
A-B RPT
returns to point A and starts repeat
playback of the selected segment
(A-B).
A–B
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Playing in a Favorite Order
You can combine your favorite titles, chapters, or tracks and play them in the
order you determine. You can program up to 30 selections into the memory.
(Memory playback)
3
/
/
/
2
CLEAR
2
1
DVD
VCD
CD
Setting titles, chapters, or tracks in a favorite order
To change the programmed selections
1 While the display appears on the TV screen, press
Insert a disc and press MEMORY during
stop.
1
2
/
/
/
to move the highlighted bar to the item
you want to change.
2 Change the selection following the instructions in
MEMORY
The following display appears.
e.g.
step 2.
:
--
:
---
1 T
2 T
3 T
4 T
5 T
6 T
7 T
CT
CT
CT
CT
CT
CT
CT
To cancel the programmed selections
1 While the display appears on the TV screen, press
:
:
:
:
:
:
--
--
--
--
--
--
:
:
:
:
:
:
---
---
---
---
---
---
/
to move the highlighted bar to the item you
T: Title number
CT: Chapter number
or track number
want to cancel.
2 Press CLEAR.
To resume normal playback from memory
playback
Select the items in the order you want
by pressing the number buttons, then
ENTER for each item.
Press CLEAR.
CLEAR
The memory playback indicator
disappears.
Each time you press the
/
button, the space
of “T” and “CT” is highlighted in turn. Highlight
where you want to enter, then press the
corresponding number buttons.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
To select another chapter in the same title, you do
not need to select the title number.
Follow steps 2 and 3.
To select tracks from a VIDEO CD/audio CD in
order, press the number buttons for the track,
then press the ENTER button for each selection
you want.
Notes
• Some discs may not permit memory playback operation.
• If you press the REPEAT button during memory playback,
the DVD video player repeats the current memory playback.
• If you press the MEMORY or RETURN button while the
display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you turn off
the DVD video player.
Note
The space of “T (Title)” may be showing a number.
Neglect this number when using a VIDEO CD/audio
CD.
Press PLAY while the display appears
on the TV screen.
3
PLAY
The DVD video player starts memory
playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in Random Order
You can play titles, chapters within a title, or tracks in random order.
(Random playback)
2
CLEAR
1
DVD
VCD
CD
Playing titles, chapters or tracks in random order
To resume normal playback
Press CLEAR.
Press RANDOM.
1
CLEAR
RANDOM
Each time you press the RANDOM
button, the random playback mode
changes as follows.
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in conjunction
with the memory playback function.
Chapter Random
DVD
DVD
Plays the chapters
within the current title
in random order.
Chapter Random
Plays the titles in
random order.
Title Random
Track Random
VCD
CD
Plays the tracks in
random order.
Resumes normal
playback.
Random Off
If you press the RANDOM button
during playback, the DVD video
player automatically starts random
playback after finishing the current
title, chapter or track.
Press PLAY.
2
PLAY
The DVD video player starts random
playback.
Press the PLAY button within about
5 seconds after you press the
RANDOM button.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
/
/
/
ENTER
CLEAR
ZOOM
DVD
Zooming a picture
To resume normal playback
While “ZOOM” is selected, press ZOOM repeatedly to
turn off the icon.
Picture restores the size when the icon disappears.
Press ZOOM during normal, slow or still
playback.
ZOOM
The DVD video player enters the
zoom playback mode and displays
the icon.
ZOOM
e.g.
• The ENTER button cannot cancel zoom playback if
you have turned off the icon by selecting “EXIT.” To
restore normal picture size, press the ZOOM button
to display the icon, then further press the ZOOM
button until the icon turns off.
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as
described.
• Zooming does not work on subtitles or menus included on
DVD video discs.
: As you repeatedly press the ENTER
(or ZOOM) button while “ZOOM” is
selected, the magnification level
changes.
Variation of the levels includes
image reduction.
• While the icon is displayed, the
/
/
/
buttons cannot
work on menus included on the DVD video discs. If you want
to view the menus, turn off the icon.
• The magnification level varies depending on the picture size
you select. 50
: If you press the ENTER button while
“EXIT” is highlighted, you can turn
off the icon, keeping the current
magnification level.
You can shift the highlight within the
icon by the
/
/
/
buttons.
If you press and hold the
/
/
/
buttons, the zoom point shifts.
ENTER
CLEAR
Pressing the CLEAR button restores
the zoom point to the center of the
picture.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Enhancement (E.P.M.*)
You can easily select a preferred picture enhancement.
2
*E.P.M.: Enhanced Picture Mode
ENTER
1, 2
DVD
VCD
CD
Selecting the picture enhancement
To exit the picture enhancement selection
Press ENTER.
Press E.P.M.
1
E.P.M.
The picture enhancement menu
appears.
Alternatively leave the DVD video
player unattended for about 5
seconds after having made a
selection.
ENTER
Note
Actual effect to picture may vary depending on the TV. Make
selection according to your preference.
Select the picture enhancement by
pressing E.P.M. or / .
2
Each time you press the button, the picture
enhancement changes.
Normal:
Standard black level (7.5 IRE).
Enhanced Black Level:
Enhanced Black Level (0 IRE).
Movie1:
Brightness levels raised for
enhanced picture clarity.
Movie2:
For deeper, richer color
reproduction.
Animation:
For enhanced color contrast.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
2
*E.A.M.: Enhanced Audio Mode
ENTER
1, 2
DVD
VCD
CD
Selecting the sound enhancement
To exit the audio enhancement selection
Press ENTER.
Press E.A.M.
1
E.A.M.
The sound enhancement menu
appears.
Alternatively leave the DVD video
player unattended for about 5
seconds after having made a
selection.
ENTER
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select “Normal”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
Select the sound enhancement by
pressing E.A.M. or / .
• Selecting “Dialogue” disables “Dynamic Range Control”
function
.
2
50
Each time you press the button, the sound
enhancement changes.
Manufactured under license from QSound Labs, Inc. U.S. patent
Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign
counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpanderTM
is a trademark of QSound Labs, Inc. All rights reserved.
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue*:
To control dynamic range to make
dialogue more intelligible.
• To use this enhancement on sounds
output from the BITSTREAM/PCM
jack, be sure to set “Audio Out
50
Select” to “PCM.”
* Effective only during playback of
Dolby Digital recorded discs.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Camera Angle
If the scene was recorded from multiple angles, you can easily change
the camera angle of the scene you are watching.
2
ENTER
1, 2
CLEAR
DVD
Changing the camera angle
Notes
Press ANGLE while playing a scene
recorded with multiple angles.
• You can change the camera angle during still playback. The
camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing a camera
angle, the resumed playback picture may not display the new
camera angle.
1
ANGLE
While playing a scene recorded with
multiple angles, the angle icon (
flashes in the DVD display.
Press the ANGLE button while the
angle icon is flashing.
)
e.g.
1
2
3
Press ANGLE or
/
while the angle
number is displayed on the TV screen.
2
ANGLE
Each time you press the ANGLE
button, the camera angle changes.
You can change the camera angle
directly by pressing the number
buttons corresponding to its angle
ENTER
number instead of using the
buttons.
/
To turn off the display, press the
CLEAR or ENTER button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
Selecting Subtitles
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video disc.
/
/
/
ENTER
SUBTITLE
CLEAR
Good evening!
Bonsoir!
`Buenas tardes!
DVD
Selecting a subtitle language
To turn subtitles on or off
1 Press SUBTITLE during playback.
Press SUBTITLE during playback.
1
SUBTITLE
SUBTITLE
The current subtitle setting is
displayed.
2 Press
/
while the subtitle setting is displayed on
e.g.
the TV screen, to select “On” or “Off.”
Off
JP
FRE 1
SP
N
1
ENTER
A
1
Notes
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 56
• Some DVD video discs are set to display subtitles
automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear
immediately after you select “On.”
• Some DVD video discs will allow you to make subtitle
selections and turn subtitles on or off only via the disc menu.
Press SUBTITLE or
/
while the subtitle
setting is displayed on the TV screen.
2
SUBTITLE
Each time you press the SUBTITLE
button, the subtitle languages
included on the DVD video disc
change.
ENTER
To turn off the subtitle setting display,
press the CLEAR or ENTER button.
Notes
• When you turn on the DVD video player or replace a disc, the player returns to the initial default setting 52
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language
programmed on the disc.
• During some scenes, the subtitles may not appear immediately after you change the subtitle language.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
2
ENTER
1, 2
CLEAR
Good morning!
¡Buenos días!
Bonjour!
DVD
VCD
Selecting a playback audio setting
Press AUDIO during playback.
Press AUDIO or
/
while the audio
setting is displayed on the TV screen.
1
2
AUDIO
AUDIO
The current audio setting is
displayed.
Each time you press the AUDIO
button, the audio settings included
on the DVD video disc change.
e.g.
ENTER
ENG
ENG2
1
PCM 2CH
D 2CH
If you press the
/
buttons, you
can select output sound format. 50
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations. 56
To turn off the audio setting display, press the
CLEAR or ENTER button.
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting 52
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Output sound conversion table (sampling frequency/quantization bit)
and output jacks on the rear panel
Audio selection from the menu 48 50
“Bitstream”
“Analog 2ch”
“PCM”
Recording system
Dolby Digital
Discs
BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM ANALOG AUDIO
jack
OUT jacks
jack
OUT jacks
jack
OUT jacks
Bitstream
48 kHz/20 bit
Bitstream
48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit
48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit 48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
DVD video
discs
Linear PCM
96 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit
96 kHz/24 bit 48 kHz/16 bit 48 kHz/24 bit
96 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit
96 kHz/24 bit 48 kHz/16 bit
Bitstream
Bitstream
Bitstream
Bitstream
DTS
MPEG1, MPEG2
MPEG1
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
VIDEO CDs
Audio CDs
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
Linear PCM 44.1 kHz/16 bit
44.1 kHz/16 bit
Bitstream
(Noise)
Bitstream
(Noise)
Bitstream
(Noise)
DTS
: 3D sound enhancement can function.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced playback
On-screen Display Operation
When you turn on the on-screen display, you can view information on operational
status and access features and settings.
/
ENTER
DISPLAY
DVD
VCD
CD
On-screen display operation
Press DISPLAY.
DISPLAY
The following display appears.
Each time you press the DISPLAY button, the on-screen display changes as follows.
If you press the
specific feature.
/
buttons to select an icon, then press the ENTER button, you can access the
When you select an icon ( ), there is no need to press the ENTER button.
*
See the pages in
for details on the features.
e.g. When playing a DVD video disc
: Title number (Track number)
Locate a title or track using the number buttons.
*
*
*
31
31
34
2
3
0:08:16
: Chapter number
Locate a chapter using the number buttons.
: Elapsed time of the current title
To enter the time to locate a desired location.
: Audio setting 43
: Subtitle setting 42
: Angle setting 41
: To turn off the display.
: Title number (Track number)
Locate a title or track using the number buttons.
*
*
*
Press DISPLAY again.
31
31
34
: Chapter number
Locate a chapter using the number buttons.
: Remaining time of the current title
To enter the time to locate a desired location.
2
3
-0:21:28
40
: E.A.M. (Enhanced Audio Mode) setting
39
: E.P.M. (Enhanced Picture Mode) setting
38
: To zoom a picture.
50
: “Audio Out Select” setting
BST: Bitstream 2CH: Analog 2ch PCM: PCM
: To turn off the display.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
: Title number (Track number)
Locate a title or track using the number buttons.
Press DISPLAY again.
*
*
31
: Chapter number
Locate a chapter using the number buttons. 31
2
3
: To stop playback. 27
: Playback starts from the beginning of the
current chapter or track.
31
: Fast reverse playback 28
: To start playback. 26
: Fast forward playback 28
: To locate succeeding chapters or tracks. 31
: To begin slow motion playback. 29
: To pause playback. 27
: To turn off the display.
The on-screen display will vary depending on the disc.
Press DISPLAY again.
DVD
: Data transfer rate (Mbit/s)
= Amount of picture, sound and subtitle data in the
DVD video disc transferred per second.
The larger the value is, the more data processed,
but this does not necessarily insure better picture
quality.
:
:
0 08 16
9.6
2
3
CD
: CD-Text
Displays CD-Text data if included on the audio
CDs. (Some letters may not be displayed properly
depending on the disc.)
OFF
VCD
: The on-screen display turns off.
To turn off the on-screen display, press
DISPLAY again.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
You can change the default settings to customize
performance to your preference.
Customizing the Function
Settings
Table of Languages
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings
2
You can change the default settings to customize performance to your
preference.
RETURN
3, 4
1, 6
DVD
VCD
CD
Setting procedure
Press
/
to select the setting you
Press SETUP during stop.
want to change, then press ENTER.
1
2
3
4
SETUP
The following on-screen display
appears.
ENTER
ENTER
Picture
TV Shape 4:3 LB
Pause/Still Auto
Change the selection by
buttons, by referring to the
corresponding pages ( 50 – ), then
press ENTER.
/
or other
Press
/
to select a symbol for the
setting you want to change.
(See the next page.)
ENTER
ENTER
ENTER
Repeat steps 3 and 4 to change other
settings.
To select another operation, go back to step 2.
5
6
Picture performance settings
Press SETUP.
Output sound settings
Language settings
Display settings
SETUP
The on-screen display disappears.
To return to the previous display
Press RETURN.
RETURN
Operational settings
Initial setup
Notes
• The on-screen display disappears when you press the
SETUP button.
• The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear. In this case, try again after
playback is stopped.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Details
Page
TV Shape
Pause/Still
DVD
DVD
To select a picture size according to the aspect 50
ratio of your TV.
To select the resolution of still pictures.
(Field/Frame)
50
DVD
VCD
CD
50
50
Audio Out Select
To select an output sound format
corresponding to your system connection.
DVD
Dynamic Range Control
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late hours playback.
DVD
51
Karaoke Vocal
To turn on or off the vocal output during DVD
KARAOKE disc playback.
DVD
VCD
CD
On-Screen Language
Disc Menu Language
Audio Language
To select a preferred language for on-screen
displays.
51
51
52
52
DVD
DVD
DVD
To select a preferred language for disc menus.
To select a preferred language for the sound
track.
Subtitle Language
To select a preferred language for subtitles.
DVD
VCD
CD
To turn on or de-activate the operational status
display on the TV screen.
On-Screen Displays
Background
53
53
53
DVD
VCD
CD
To select the background color or background
picture.
DVD
To turn the screen saver on or off.
Screen Saver
DVD
53
55
55
To turn the parental lock function on or off.
Parental Lock
Title Stop
PBC
DVD
VCD
To turn on or off a feature that automatically
stops playback after a title has been viewed.
To use the menu screen when playing a PBC-
controllable VIDEO CD.
DVD
VCD
CD
To install the initial system setting.
55
On-Screen Language
TV Shape
Audio Out Select
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
Audio
Audio Out Select
Dynamic Range Control On
Karaoke Vocal
Off
Picture
TV Shape 4:3 LB
Pause/Still Auto
Bitstream
DVD
DVD VCD
CD
TV Shape
Audio Out Select
4:3 Letterbox:
Select when a standard 4:3 TV is
connected.
Select the output sound format corresponding to your
system connection.
43
Displays theatrical images with
masking bars above and below the
picture.
For details of sound recording systems, see
.
Bitstream:
Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
21 22
MPEG1 or MPEG2 decoder.
4:3 Normal:
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill
your TV screen. Either or both
sides of the picture are cut off.
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 2ch: Select when connected to a TV, or
Dolby Surround Pro Logic or stereo
system via the analog audio jacks.
18 19 21
16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on the DVD video
disc. Therefore, the playback picture of some DVD
video discs may not conform to the picture size you
select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears
in the 4:3 picture size regardless of the TV shape
setting.
• If you select “16:9 Widescreen” and you own a 4:3 TV
set, the DVD playback picture will be horizontally
distorted during playback. Images will appear to be
horizontally compressed. Always be sure that your TV
shape conforms to the actual TV in use.
PCM:
Select when connected to a 2 channel
digital stereo amplifier. 23
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
DVD
Dynamic Range Control
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
DVD
Pause/Still
Notes
Auto:
For normal use. Still and fast motion images
can be paused.
• This function works only during playback of Dolby
Digital recorded discs.
Frame: The resolution of still pictures is improved,
so that you can make a motionless picture
more clearer when you pause it.
• The level of Dynamic Range Reduction may differ
depending on the DVD video disc.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
C
DVD
Karaoke Vocal
Language
Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
Subtitle Language
ENG
– – –
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background
accompaniment.
DVD VCD
CD
On-Screen Language
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD video
player.
English: To view on-screen displays in English.
Français:To view on-screen displays in French.
Español: To view on-screen displays in Spanish.
DVD
Disc Menu Language
English: To display disc menus in English.
French: To display disc menus in French.
Spanish To display disc menus in Spanish.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
1) Obtain the abbreviation of the preferred
language from the list 56
.
2) Select the first character by pressing the
buttons.
/
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
Language
On-Screen Language ENG
Disc Menu Language ENG
English
French
Spanish
Others
Audio Language
Subtitle Language
ENG
– – –
Code
S
E
4) Press the ENTER button.
Note
Some DVD video discs may not include your pre-
selected language. In this case, the DVD video player
automatically displays disc menus consistent with the
disc’s initial language setting.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
3) Press the
/
buttons to shift and select the
DVD
Audio Language
second character by pressing the
/
buttons.
English: To play sound tracks in English.
French: To play sound tracks in French.
Spanish: To play sound tracks in Spanish.
Others: To make a further choice.
After pressing the ENTER button, follow
steps 1) - 4) below.
Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
Subtitle Language
English
French
Spanish
No Subtitle
Others
ENG
– – –
1) Obtain the abbreviation of the preferred
Code
A
A
56
language from the list
.
2) Select the first character by pressing the
buttons.
/
4) Press the ENTER button.
3) Press the
/
buttons to shift and select the
second character by pressing the
/
buttons.
Notes
• Some DVD video discs may be set to display subtitles
in a different language than you selected. A prior
subtitle language may be programmed on the disc.
• Some DVD video discs allow you to change subtitle
selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate
subtitle language from the selection on the disc menu.
Language
On-Screen Language ENG
Disc Menu Language ENG
English
French
Audio Language
Subtitle Language
ENG
– – –
Spanish
Others
Code
S
E
4) Press the ENTER button.
Note
Some DVD video discs may be played in a different
language than you selected. A prior language may be
programmed on the disc.
DVD
Subtitle Language
English:
French:
Spanish:
To display subtitles in English.
To display subtitles in French.
To display subtitles in Spanish.
No Subtitle: To disable subtitles.
Others:
To make a further choice.
After pressing the ENTER button,
follow steps 1) - 4) below.
1) Obtain the abbreviation of the preferred
56
language from the list
.
2) Select the first character by pressing the
buttons.
/
52
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Display
On-Screen Displays On
Operation
Parental Lock
Off
Off
On
Background
Screen Saver
Gray
On
Title Stop
PBC
DVD
DVD VCD
CD
On-Screen Displays
Parental Lock
Off: Operational modes (e.g. “ ”, “
displayed.
On: Operational modes (e.g. “ ”, “
displayed on-screen.
”) are not
”) are
DVD video discs equipped with the parental lock
function are rated according to their content. The
contents allowed by a parental lock level and the way
a DVD video disc can be controlled may vary from
disc to disc. For example, if the disc allowed you
could edit out violent scenes unsuitable for children
and replace them with more suitable scenes, or lock
out playback of the disc altogether.
DVD VCD
CD
Background
Blue:
Gray:
Blue background.
Gray background.
• DVD video discs may or may not respond to the
parental lock settings. This is not a defect in the DVD
video player. Make sure this function works with your
DVD video discs.
Picture: To use the picture which appears when you
turn on the DVD video player as a
background.
Jacket: To use the jacket picture included on some
discs as a background. If it is not included,
a gray background will be substituted.
Off: The parental lock feature does not function.
After pressing the ENTER button, follow step 1)
below.
On: To activate the parental lock feature or change
the settings.
DVD
Screen Saver
Off: The screen saver is disengaged.
On: The screen saver operates.
After pressing the ENTER button, follow steps
1) - 3) below.
Operation
Parental Lock
Title Stop
PBC
Off
Off
On
Off
On
Security Code
– – – –
(Continued)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Customizing the Function Settings (continued)
Setting details
(Continued)
1) Press the number buttons to create a personal
3) Press the
/
buttons to select the parental
lock level, then press the ENTER button.
4-digit security code, then press the ENTER
button.
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
Operation
Parental Lock
Title Stop
PBC
Off
Off
On
Area Code
Level
S
U
7
2) Enter the code of a country/area whose
standards were used to rate the DVD video
disc, referring to the list below.
You cannot play DVD video discs rated higher than
the level you selected unless you cancel the parental
lock function.
For example, when you select level 7, discs rated
higher than level 7 are locked out and cannot be
played.
Country/Area
AUSTRALIA
BELGIUM
CANADA
CHINA
CHINA HONG KONG
DENMARK
FINLAND
Code
AU
BE
CA
CN
HK
DK
FI
The parental lock level is equivalent to the following
USA movie ratings.
Level 7: NC-17
Level 6: R
Level 4: PG 13
Level 3: PG
FRANCE
FR
DE
ID
GERMANY
INDONESIA
ITALY
IT
Level 1: G
JAPAN
JP
MALAYSIA
NETHERLANDS
NORWAY
PHILIPPINES
RUSSIAN FEDERATION
SINGAPORE
SPAIN
SWEDEN
SWITZERLAND
TAIWAN
THAILAND
UNITED KINGDOM
UNITED STATES
MY
NL
NO
PH
RU
SG
ES
SE
CH
TW
TH
GB
US
The parental lock levels for other countries/areas
than U.S. are included for future use. Check the
appropriate parental lock level when you buy a DVD
video disc equipped with the parental lock feature in
the future.
To change the parental lock level
Follow steps 1) - 3).
To change your 4-digit security code
1) After selecting “On” or “Off,” press the STOP
button four times, then press the ENTER
button.
a) Select the first character by pressing the
buttons.
b) Press the
STOP
STOP
STOP
STOP
/
ENTER
/
buttons to shift and select
the second character by pressing the
buttons.
/
The 4-digit security code is cleared.
c) Press the ENTER button.
2) Press the number buttons to create a new
4-digit security code.
3) Press the ENTER button.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Title Stop
Initial Setup
On-Screen Language ENG
Off: The DVD video player continues after playback
of a title is completed.
TV Shape
4:3 LB
Bitstream
Audio Out Select
On: The DVD video player stops after playback of a
title is completed.
VCD
PBC
Off: When playing a VIDEO CD without using the
DVD VCD
CD
Initial Setup
menu.
On: To use the menu when playing a PBC-featured
VIDEO CD.
1) Press the
/
buttons to select “On-Screen
Language,” and press the ENTER button.
ENTER
ENTER
2) Select a language pressing the
/
buttons,
and press the ENTER button.
See page 51 , “On-screen Language.”
ENTER
ENTER
3) Make your selection in the same manner as
step 1) then step 2).
50
See page
, “TV Shape.”
See page 50 , “Audio Out Select.”
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Table of Languages
Table of languages and their abbreviations
Abbreviation
Language
Abbreviation
Language
Abbreviation
Language
– – –
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
Sango
Malay
Spanish
Afar
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
IW
JI
SK
SL
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Yiddish
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Irish
Scottish Gaelic
Galician
Xhosa
Yoruba
Zulu
GL
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Before Calling Service
Personnel
Specifications
LIMITED WARRANTY DVD
VIDEO PLAYER
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
No power.
• The power plug is disconnected.
• Connect the power plug securely into the
wall outlet.
18
The DVD video player turned • The automatic power off function turned
• Press the PLAY button.
27
26
off by itself.
the unit off.
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
video player appears on the TV screen.
• The video cable is not connected securely. • Connect the video cable securely into the 18, 19
appropriate jacks.
No sound.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD video player.
26
• The audio cable is not connected securely. • Connect the audio cable securely into the 18 – 23
appropriate jacks.
• The audio receiver or TV is turned off.
• Turn on the equipment connected with
the audio cable.
26
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
43, 48
50
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
9
–
• It is in fast forward or fast reverse
playback.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
Brightness is unstable or
noises are present in the
playback pictures.
• The effect of copy protection.
• Connect the DVD video player directly to
the TV. Avoid connecting the DVD video
player to a VCR or TV/VCR combination.
18
The DVD video player does
not start playback.
• No disc is inserted.
• Insert a disc.
26
10
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type and color system.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
26
26
• The disc is not placed within the guide.
• Place the disc correctly inside the guide
on the disc tray.
• The disc is dirty.
• Clean the disc.
9
• The parental lock function is set.
• Cancel the parental lock function or
change the parental lock level.
48, 53
Playback does not follow the
course of the disc’s program.
• It is in the mode of repeat playback,
memory playback, etc.
• These operations may prevent a proper
progress of the contents.
–
–
Buttons do not work.
• Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operations.
• Press and hold the ON/STANDBY button
on the front panel for more than about 3
seconds. The DVD video player turns off.
Press the button again to turn it on. If the
buttons still do not work, disconnect the
power plug and insert it into the wall
outlet again.
The remote control does not
work properly.
• The remote control is not pointed at the
remote sensor of the DVD video player.
• Point the remote control at the remote
sensor of the DVD video player.
15
15
15
• The remote control is too far from the DVD • Operate the remote control within about
video player.
7 m.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD video player / outputs / supplied accessories
DVD Video Player
Power supply
Power consumption
Mass
120 V AC, 60 Hz
14 W
2.2 kg
External dimensions
Signal system
Laser
430 × 60 × 222 mm (W/H/D)
Standard NTSC
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Signal-to-noise ratio
Audio dynamic range
Harmonic distortion
Wow and flutter
More than 112 dB
More than 102 dB
Less than 0.002 %
Below measurable level (less than 0.001 % (W.PEAK))
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Operating conditions
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 2
Audio output (BITSTREAM/PCM
COAXIAL)
0.5V (p-p), 75 Ω, pin jack × 1
Audio output (ANALOG)
2.0 V (rms), 680 Ω, pin jacks (L, R) × 1
Supplied Accessories
Audio/video cable ................................................. 1
Remote control (SE-R0047) ................................. 1
Batteries (AA) ....................................................... 2
• Designs and specifications are subject to change without notice.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii, Inc. (“THI”) make the following limited warranties to
original consumers for DVD Players purchased and used in the United States. THESE LIMITED WARRANTIES EXTEND TO
THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty*
Your Responsibility
TACP/THI warrants this DVD Player against defects in
materials or workmanship for a period of one (1) year after
the date of the original retail purchase. DURING THIS
PERIOD TACP/THI WILL, AT TACP/THI’S OPTION,
REPAIR OR EXCHANGE A DEFECTIVE DVD PLAYER
WITH A NEW OR REFURBISHED DVD PLAYER, AT TACP/
THI’s OPTION. DURING THE INITIAL NINETY (90) DAYS,
THIS REPAIR OR EXCHANGE WILL BE WITHOUT
CHARGE TO YOU, EXCEPT YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR
THE DVD PLAYER TO BE SHIPPED TO THE
DESIGNATED TACP/THI FACILITY. AFTER THE INITIAL
NINETY (90) DAYS AND FOR THE REMAINDER OF THE
WARRANTY PERIOD, AN ADDITIONAL HANDLING FEE
WILL APPLY. YOU MUST DELIVER THE ENTIRE DVD
PLAYER AND ALL ACCESSORIES (SUCH AS POWER
CORDS, CABLES, AND THE UNIT’S REMOTE CONTROL
DEVICE) TO THE DESIGNATED TACP/THI FACILITY, AS
INSTRUCTED BY TACP/THI. TACP/THI IS NOT
THE ABOVE LIMITED WARRANTIES ARE SUBJECT TO
THE FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of
purchase. For rental firms, proof of first rental is also
required.
(2) The limited warranties from TACP and THI are effective
only if the DVD Player is purchased and operated in the
U.S.A. or Puerto Rico.
(3) Labor service charges for installation, set up, and
adjustment of customer controls are not covered by
these limited warranties.
(4) These limited warranties extend only to defects in
materials or workmanship as limited above and do not
extend to any DVD Player or accessories which have
been lost or discarded by you, or to damage to any
DVD Player or accessories caused by misuse, accident,
Acts of God (such as lightning), or to fluctuations in
electric power, improper installation, improper
RESPONSIBLE IF YOUR DVD PLAYER IS LOST OR
DAMAGED DURING SHIPMENT.
maintenance or use in violation of instructions furnished
by TACP/THI; or to units which have been modified or
which have had the serial number removed, altered,
defaced or rendered illegible.
*Commercial Units
DVD Players sold and used for commercial purposes have
a limited ninety (90) day warranty.
(5) Physically damaged DVD Players are not acceptable
for repair or exchange whether in or out of warranty and
will be returned as received.
Rental Units
The warranty period for rental units begins with the first
rental or thirty (30) days from the date of shipment to the
rental firm, whichever comes first.
How to Obtain Warranty Services
If, after following all of the operating instructions in this
manual and checking the “Troubleshooting” section, you
find that service is needed, call one of the following
Customer Solutions Centers to obtain further instructions.
Have your proof of purchase and your model and serial
numbers available when you call.
Owner’s Manual and Demographic Card
You should read this owner’s manual thoroughly before
operating this DVD Player. You should complete and mail
the enclosed Demographic Card within ten days after you,
or the person who has given you this product as a gift,
purchased this DVD Player. This is one way to enable
TACP/THI to provide you with better customer service and
improved products. Failure to return the Demographic Card
will not affect your rights under this warranty.
For DVD Players purchased in the United States,
except Hawaii, call TACP, toll free at 1-866-583-7353.
For DVD Players purchased in Hawaii, call THI. at
808-591-9281.
For additional updates, visit TACP’s web site:
60
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITATION OF IMPLIED WARRANTIES
Time for Taking Action
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO
THE DURATION OF THE LIMITED WARRANTIES SET
FORTH ABOVE.
The time within which action must be commenced to
enforce any obligation of TACP or THI arising under this
limited warranty or under any law of the United States or of
any state thereof is hereby limited to 90 days from the date
you discovered, or should have discovered, the defect. This
limitation does not apply to implied warranties arising under
the law of any state of the U.S.A.
LIMITATION OF WARRANTY
HOW STATE LAW RELATES TO WARRANTY
WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED
BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING LIMITED WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS AND SIMILAR
OBLIGATIONS OF TACP OR THI WITH RESPECT TO
YOUR DVD PLAYER.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE IN THE
U.S.A.
SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, WHEN AN ACTION MAY BE BROUGHT, OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU UNDER SUCH CIRCUMSTANCES.
EXCLUSION OF DAMAGES
IN NO EVENT SHALL TACP OR THI BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
No Change, Modification, or Extension
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of these
limited warranties in any manner whatsoever.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and
forward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty.
Product must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada
are not covered by these warranties.
Contact: Toshiba of Canada Limited
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 1J1
(514)-856-4100
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|