Toshiba-SD-6915-Cover fixrev01 2004/6/04 07:27am Page 2
5 Disc DVD Changer
SD-6915SU
Instruction Manual
DISC
EXCHANGE
PLAY/
PAUSE
POWER
OPEN/CLOSE
STOP
DISC SKIP
AK68-00479A Rev01
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 4
Precautions
Before you start
Table of Contents
Setup
CAUTION
Accessories
Important Safety Instructions . . . . . . . . . . . . . .2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Before you start . . . . . . . . . . . . . . . . . . . . . . . .5
General Features . . . . . . . . . . . . . . . . . . . . . . .6
Disc Type and Characteristics . . . . . . . . . . . . .7
Description-Front Panel . . . . . . . . . . . . . . . . . .8
Display Indicators . . . . . . . . . . . . . . . . . . . . . .9
Description-Rear Panel . . . . . . . . . . . . . . . . .10
Tour of the Remote Control . . . . . . . . . . . . . .11
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• This device is protected by U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and
6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Batteries for
Remote Control
(AAA Size)
Remote Control
Connections
Choosing a Connection . . . . . . . . . . . . . . . . .12
Basic Functions
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .14
Operating the Disc Changer . . . . . . . . . . . . . .15
Using the Search & Skip Functions . . . . . . . .15
Using the Display Function . . . . . . . . . . . . . . .16
Using the Disc and Title Menu . . . . . . . . . . . .17
Using the Function Menu . . . . . . . . . . . . . . . .17
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .18
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . .18
Program Play & Random Play . . . . . . . . . . . .19
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
User’s Manual
Video/Audio Cable
• Do not place anything other than the disc in the disc tray.
Install Batteries in the Remote
1. Open the battery cover on the back of the
remote.
Advanced Functions
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
Selecting the Audio Language . . . . . . . . . . . .20
Selecting the Subtitle Language . . . . . . . . . . .20
Changing the Camera Angle . . . . . . . . . . . . .21
Using the Bookmark Function . . . . . . . . . . . .21
Using the Zoom Function . . . . . . . . . . . . . . . .22
SACD Playback . . . . . . . . . . . . . . . . . . . . . . .23
DVD AUDIO Playback . . . . . . . . . . . . . . . . . .24
Clips Menu for MP3/WMA/JPEG . . . . . . . . . .26
Folder Selection . . . . . . . . . . . . . . . . . . . . . . .26
MP3/WMA Playback . . . . . . . . . . . . . . . . . . .27
Picture CD Playback . . . . . . . . . . . . . . . . . . .28
2. Insert two AAA batteries. Make sure that the
polarities (+ and -) are aligned correctly.
3. Replace the battery cover.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
If remote doesn’t operate properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
• Add in the distance & angle of the remote control
with reference whit remote receiver.
Changing Setup menu
• Keep in a clean protection jacket.
Using the Setup Menu . . . . . . . . . . . . . . . . . .29
Setting Up the Language Features . . . . . . . . .29
Setting Up the Audio Options . . . . . . . . . . . . .31
Surround Sound Speaker Setup . . . . . . . . . . .32
Setting Up the Display Options . . . . . . . . . . . .33
Setting Up the Parental Control . . . . . . . . . . .34
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Reference
Controlling a TV with the Remote . . . . . . . . . .36
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .37
Specifications . . . . . . . . . . . . . . . . . . . . . . . .38
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
ENG-4
ENG-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 6
General Features
Disc Type and Characteristics
DVD Changer
Note
This DVD player is capable of playing the following types of discs with the corresponding logos:
The DVD Changer holds 5 discs and provides full
random play with fast disc changes when press and
hold NUMBER button.
* Discs which cannot be played with this player.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
Recording Types Disc Size Max. Playing Time
Characteristics
Disc Types (Logos)
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
DVD-VIDEO
Excellent Sound
Dolby Digital, a technology developed by Dolby Labo-
ratories, provides crystal clear sound reproduction.
• CDGs play audio only, not graphics.
5"
Double-sided 480 min.
Audio
+
* Ability to play back may depend on recording
conditions.
• DVD-R, +R
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Video
31/2"
Double-sided 160 min.
• CD-RW
Screen
• DVD+RW, -RW
Both regular and widescreen(16:9) pictures can be
viewed.
AUDIO-CD
• CD is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration of
audio quality over time.
74 min.
20 min.
5"
* It may not play CD-R, CD-RW and DVD-R in all
cases due to the type of disc or condition of the
recording.
Audio
Slow Motion
An important scene can be viewed in slow motion.
31/2"
Programmed Play (CD)
• DVD AUDIO is a format specifically
designed to provide the highest
possible audio fidelity capable on
DVD.
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your DVD player directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD discs.
DVD AUDIO
SACD
Audio
+
Video
You can program tracks to play in desired order.
400 min.
74 min.
5"
5"
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
•
SACD is a high quality audio format with
higher sampling rates and fuller, richer
sound as compared to regular CD.
Audio
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision Cor-
poration, and is intended for home and other
limited viewing uses only unless otherwise
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Disc Markings
Play Region Number
Both the DVD player and the discs are coded by region.
These regional codes must match in order for the disc to
play. If the codes do not match, the disc will not play.
The Region number for this player is 1.
If region for numbers, which stand for their playable area,
are printed on your DVD video disc and you do not find
, disc playback will not be allowed by the player.
If the DVD disc does not have any region number printed,
the disc playback is not guaranteed.
Progressive Scan
Play Region Number
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
NTSC broadcast system in U.S.A, Canada,
Korea, Japan, etc.
NTSC
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Dolby Digital disc
Stereo disc
or
PROGRESSIVE SCAN OUTPUTS (525p/625p)
STEREO
Repeat
“CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.”
You can repeat a song or movie simply by pressing
the REPEAT button.
DIGITAL
SOUND
Digital Audio disc
MP3/WMA
This unit can play discs created from MP3/WMA
files.
DTS disc
MP3 disc
SACD (Super Audio CD)
SACD disc
DVD Audio disc
SACD is a high quality audio format with higher
sampling rates and fuller, richer sound as compared
to regular CD.
DVD AUDIO
DVD AUDIO is a format specifically designed to
provide the highest possible audio fidelity capable
on DVD.
ENG-6
ENG-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 8
Description-Front Panel
Display Indicators
2
3
1
5
6
7
8 9
DISC
EXCHANGE
PLAY/
PAUSE
OPEN/CLOSE
STOP
DISC SKIP
1 2 3 4 5
5
2
3
4
1
4
Front Panel Controls
Front Panel Display
1. POWER(
• Use to turn your player on and off (standby).
)
1. Tray number / Chapter / Track Indicator
2. Play / Pause / Forward play
3. Disc type indicator
6. PLAY/PAUSE (
• Begin or pause disc play.
)
7. STOP (
)
2. DVD CHANGER (TRAY)
• Press OPEN/CLOSE to open and close the disc
changer.
• Stops disc play.
8. DISC SKIP
4. Displays various messages concerning operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
• Use to skip a disc in order.
3. FRONT DISPLAY
• Operation indicators are displayed here.
9. DISC EXCHANGE
• Press this button when you want to change a
disc without stopping playback of the current
disc.
LOAD : Player is loading disc information.
4. REMOTE CONTROL SENSOR
5. OPEN/CLOSE (
• Press to open and close the disc tray.
)
5. Disc indicator
• Indicates all the discs being in tray.
• The tray number in playing twinkles.
Important Note
• In case of initial playback after opening, the indicator inexactly displays a tray number whether or not each
tray has a disc, please check the tray by using the DISC SKIP button.
• During playback of SACD, the indicator scrolls “SACD” once after first loading and display “CD”.
• During playback of DVD-AUDIO, the indicator scrolls “DVD-AUDIO” once after first loading and display
“DVD”.
ENG-8
ENG-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 10
Description-Rear Panel
Tour of the Remote Control
This remote control can also control most TVs. See pages 36.
2
1
6
8. PLAY/PAUSE Button (
)
• Press and hold the button for about 2 second to
begin/pause disc play in menu.
9. DISPLAY Button
• Displays the current disc mode.
10. SET UP Button
1
2
16
17
DIGITAL
OUT
AUDIO OUT
SURROUND
VIDEO OUT
Pb
COAXIAL
Pr
Y
WOOFER
525p
3
(480p)
• Brings up the DVD player’s menu.
11. CLEAR Button
• Use to remove menus or status displays from
the screen.
12. SUBTITLE Button
13. AUDIO Button
R
L
S/W
525i
OPTICAL
(480i)
18
19
4
S-VIDEO
R
L
FRONT
CENTER
AUDIO
VIDEO
S-VIDEO
5
6
7
20
21
22
23
• Use this button to access various audio
functions on a disc.
14. DISC SKIP Button
8
5
7
1
3
4
• Use to skip a disc in order.
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use a optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital or DTS decoder.
15. GROUP Button
• Use to select the GROUP.
16. POWER Button
24
9
25
26
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Compo-
nent Video in jacks. These jacks provide Pr, Pb
and Y video. Along with Component Video pro-
vides the best picture quality.
• Turns the DVD player’s power on or off.
17. TV CH
/
Buttons
10
11
27
28
• Channel selection.
18. TV VOL +/- Buttons
• Control volumes.
19. TV 100 button
• Channel number button.
20. OPEN/CLOSE (
12
13
29
30
• If 525p(480p) Video Out is selected by setting
Video select switch progressive scan mode will
work.
• If 525i(480i) Video Out is selected by setting
Video select switch interlace scan mode will
work.
14
15
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input
jacks.
) Button
3. MIXED AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
• To open and close the disc tray.
21. A-B REPEAT Button
• Use to mark a segment to repeat between A
and B.
22. PROG Button
• Allows you to program a specific order.
23. SEARCH/SKIP Buttons (
• Allows you to search forward/backward through
a disc. Use to skip the title, chapter or track.
24. CURSOR Button
25. ENTER Button
• This button functions as a toggle switch.
26. STOP Button (
7. Video Select Switch
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
• The Video Output must select the 525i(480i) or
S-Video by setting Video select switch.
Important Note
/
,
/
)
DVD Function Buttons
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
1. DVD Button
• DVD mode select button.
2. TV Button
• TV mode select button.
3. NUMBER Buttons
4. I.SELECT Button
• TV input select.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
quality picture.
• The Video Output must select the S-Video by
setting Video select switch.
• If 525p(480p) Video Output is selected by setting
Video select switch, Video (Composite) and
S-Video will not work.
)
•
Press and hold the button in menu for about 2 second.
27. MENU Button
5. STEP Button
• Brings up the Disc menu.
• Advances play one frame at a time.
28. RETURN Button
6. REPEAT Button
• Returns to a previous menu.
• Allows you to repeat play a title, chapter, track,
or disc.
29. PAGE Buttons
• Use to skip the PAGE.
7. ZOOM Button
• Enlarges DVD picture.
30. INDEX Buttons
• Use to skip the INDEX.
ENG-10
ENG-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 12
Choosing a Connection
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
• Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
Method 1
Method 2
Method 3
Method 4
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Best
picture
Optimum
picture
Good
picture
Better
picture
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
Basic Audio
TV
Connection to an Audio System
Method 1
Method 2
Method 3
Video
Cables
S-Video
Cable
AV Cable
OR
OR
AUDIO
SYSTEM
DVD
Player
5.1ch Analog Amplifier
Audio Input Jacks
2ch Amplifier
Dolby Digital Decoder
Digital Audio Input Jack
Audio Input Jacks
R
-
AUDIO
-
L
VIDEO
S-VIDEO
Component Video
Jacks
(Progressive)
Component Video
Jacks
Audio Output
Jacks
Video Output
Jack
S-Video
Jack
(Interlace)
Method 1
DVD Player + TV with Video Input Jack
(The Video Output must select the S-Video or 525i(480i) by setting Video select switch.)
Method 2
DVD Player + TV with S-Video Input Jack
OR
(The Video Output must select the S-Video by setting Video select switch.)
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output must select the 525i(480i) by setting Video select switch.)
DVD
Player
R
R
SURROUND
FRONT
L
S/W
OPTICAL
Method 4
L
CENTER
R
-
AUDIO
-
L
ANALOG AUDIO OUT
COAXIAL
DVD Player + TV with Progressive Scan Jacks.
(The Video Output must select the 525p(480p) by Video select switch.)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on
your TV. Then select 525p(480p) by using Video select switch.
Analog Audio Out
(Multi Channel)
Analog Audio Out
(2 Channel)
Digital Audio Out
• If 525p(480p) Video Output is selected by setting Video select switch, Video(Composite) and S-Video will not
work.
• Our set do not have Video output setting in setup menu.
Note
• In case of DVD-AUDIO, SACD playback cannot use Digital Audio Out.
• In case of SACD playback cannot use multi channel or 2 channel Digital Audio out. (See page 31~32)
Important Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan
settings in the TV’s menu system.
• Depending on your TV, the Method of connection may differ from the illustration above.
ENG-12
ENG-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 14
Playing a Disc
Operating the Disc Changer
Using the Search & Skip Functions
7. Step Motion Play
Before Play
The DVD Changer holds 5 discs and provides
full random play with fast disc changes when
press and hold NUMBER button.
During play, you can search quickly through a
chapter or track or use the skip function to
jump to the next selection.
(Except CD/DVD-AUDIO/SACD)
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press and hold the PLAY/PAUSE (
normal play.
• Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on.
• If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
Searching through a Chapter or Track
Exchanging Discs
During play, press and hold the
on the remote.
or
button
) to resume
Exchange allows you to change up to 4 discs
except the disc currently playing.
After plugging in the player, the first time you press
the DVD POWER button, this screen comes up :
If you want to select language, press a
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)
If you don’t select language, at first time, setting
value of Setup menu will be lost.
(You can only perform step motion play in the forward
direction.)
• In case of SACD, when the clip menu is off, you can use
this function. (See page 23)
1. Press the DISC EXCHANGE button on the front
of the player when in the play mode.
The tray opens with two slots available for you to
load or change discs.
8. Slow Motion Play
(Except CD/DVD-AUDIO/SACD)
Press and Hold the FWD SEARCH (
remote during PAUSE or STEP mode.
- By pressing the FWD SEARCH (
select slow motion play for 1/8, 1/4 or 1/2 of normal
speed.
- No sound is heard during slow mode.
- Press and hold the PLAY/PAUSE (
normal play.
DVD
2X, 4X, 8X, 32X, 128X
CD/SACD/DVD-AUDIO 2X, 4X, 8X
button on the
2. Press the DISC SKIP button on the remote or on
the front of the player to turn the platter to the
other two slots. And load or change the third and
fourth discs.
• To change all the discs, first press the STOP
button, then the OPEN/CLOSE and DISC SKIP
buttons.
) button, you can
Skipping Tracks
) to resume
During play, press the
or
button.
- Reverse slow motion play will not work.
• When playing a DVD/DVD-AUDIO, if you press the
button, it moves to the next chapter. If you press the
button, it moves to the beginning of the chapter. One more
press makes it move to the beginning of the previous
chapter.
3. Press the DISC EXCHANGE or OPEN/CLOSE
button on the front of the player to close the disc
tray.
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press and hold the
Play
• When playing a SACD or CD, if you press the
button, it moves to the next track. If you press the
button, it moves to the beginning of the track. One more
press makes it move to the beginning of the previous
track.
Disc Exchange
PLAY/PAUSE (
) button again, it will pick up
where you left off. (unless the disc is removed or the
player is unplugged, or if you press and hold the
1. Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray
opens.
STOP (
) button twice.)
2. Place a disc gently into the tray with the disc’s
label facing up.
Note
• If the player is left for about 5 minutes in pause
mode, it will stop.
3. Press and hold the PLAY/PAUSE (
) button or
OPEN/CLOSE button to close the disc tray.
• If the player is left in the stop mode for more than
about 30 minutes, the power will automatically
shut off. (Automatic Power-Off Function)
Using the DISC SKIP function
4. Stopping Play
Press the STOP (
Use the Disc Skip function to change to another
disc currently in the disc platter.
) button during play.
• If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press and hold the
5. Removing Disc
Press the OPEN/CLOSE button.
1. While in play or stop mode, press the DISC SKIP
button. The platter turns clockwise to the next
available disc.
PLAY/PAUSE (
• This icon indicates an invalid button press.
• When menu screen is displayed, one press of
PLAY/PAUSE ( ) button or STOP ( ) button
) button to resume normal play.
6. Pausing Play
Press and hold the PLAY/PAUSE (
on the remote during play.
- Screen stops, no sound.
) or STEP button
Disc Skip
function as the Up/down cursor. It will only activate
the Play, Pause or Stop function when it is press
and hold for about 2 seconds.
- To resume, press and hold the PLAY/PAUSE (
button once again.
)
ENG-14
ENG-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 16
Using the Display Function
Using the Disc and Title Menu
Using the Function Menu
To access the desired title when there is
When Playing a DVD
1. During play, press the DISPLAY button on the
remote.
Using the Disc Menu
Using the Function Menu
more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified.
Title
1. During the playback of a DVD disc, press the
SETUP button on the remote.
1. Press the SETUP button during playback.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
2. Use the UP/DOWN buttons to select the desired
item.
2. Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
3. Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
- Info (See Page 17)
Most DVD discs are recorded in
chapters so that you can quickly find a
specific passage (similar to tracks on an
audio CD).
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press the ENTER button.
• You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
Chapter
- Zoom (See Page 22)
Track
- Bookmark (See Page 21~22)
- Repeat (See Page 18)
4. To make the screen disappear, press the
DISPLAY button again.
- SACD/CD (See Page 23~24)
- Angle (See Page 21)
Allows playback of the film from a
Time desired time. You must enter the starting
time as a reference.
4. Use the UP/DOWN button to highlight one of the
6 functions. Then press the RIGHT or ENTER
button to access the function.
DVD
Refers to the language of the film
Audio soundtrack. In the example, the
soundtrack is played in English 5.1CH.
A DVD disc can have up to eight
different soundtracks.
DVD
01
Title
02
Chapter
Using the Title Menu
0:00:13
Time
ENG 5.1CH
Audio
1. During the playback of a DVD disc, press the
SETUP button on the remote.
Off
Subtitle
Refers to the subtitle languages
available in the disc.
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen.
2. Select Title Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Subtitle
A DVD disc can have up to 32 different
subtitles.
When Playing a CD
1. A CD play starts.
The DISPLAY window appears directly.
Note
2. Press the DISPLAY button, the display window
disappears
• You can also directly select these functions using
their respective buttons on the remote.
CD
CD
01
Track
Note
0:00:48
Time
• Depending on a disc, the Title and Disc Menus
may not work.
• Title Menu will only be displayed if there are at
least two titles in the disc.
• You can also use the Disc Menu, using the MENU
button on the remote.
ENG-16
ENG-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 18
Repeat Play
Slow Repeat Play
Program Play & Random Play
Repeat the current track, chapter, title, a
chosen section (A-B), or all of the disc.
This feature allows you slowly to repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
Program Play (CD)
Random Play (only CD-DA)
1. Press the PROG. button.
1. Press the PROG. button.
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
2. Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
When playing a DVD/CD
1. Press the REPEAT button on the remote.
Repeat screen appears.
When playing a DVD
3. Use the LEFT/RIGHT/UP/DOWN buttons to
select the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
3. You can see the RANDOM 1/2/3, choose a
number by using the LEFT/RIGHT buttons and
then press the ENTER button.
1. During play, press and hold the PLAY/PAUSE
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
(
) button.
- Random 1: Plays all the tracks on a single disc
in random order and then stop.
• Chapter (
) : repeats the chapter that is playing.
2. Press and hold the
button on the remote
4. Press and hold the PLAY/PAUSE (
The disc will be played in programmed order.
) button.
• Title ( T ) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
during PAUSE or STEP mode. Press again and
you can select slow motion play for 1/8, 1/4 and
1/2 of normal speed.
- Random 2 : Plays all the tracks on current disc
in random order and then plays all
the tracks on each succeeding disc
in random order and then stops.
DVD
PROGRAM
RANDOM
3. Press the A-B RPT button to select the point
where the function starts. (A)
REPEAT ENTER
Off
01
01 A - B
T
- Random 3 : Plays 3 tracks randomly from a disc
and then plays 3 tracks randomly
on other discs until all CD discs
turn twice.
4. Press the A-B RPT button to select the point
where the function ends. (B)
4. To return to normal playback, press CLEAR
button.
CD
Note
REPEAT ENTER
Off
T
01
D
01 A - B
• The disc will play from A to B repeatedly at the
PROGRAM 01
PROGRAM
RANDOM
speed you chose.
Track
Program Order
- - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
•
To terminate the function, press the CLEAR button or
A-B RPT button again.
* A-B REPEAT
• Press the REPEAT button. Select A-B on screen with
the LEFT/RIGHT buttons or press the A-B RPT button
on the remote.
CLEAR
R1
R2
R3
• Press ENTER at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat
play to stop (B).
CD
01
Track
• To terminate the function, press the CLEAR button or
A-B RPT button again.
0:00:48
Random
Time
1
Random
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
3. Press ENTER.
Note
4. To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
• Depending on a disc, the Program and Random
Play functions may not work.
• This unit can support a maximum of 20
programmed tracks.
Note
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
• DVD repeats play by chapter or title, CD repeats
play by disc or track.
• Depending on a disc, the Repeat function may not
work.
• During EXCHANGE function, Random play doesn’t
work.
ENG-18
ENG-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 20
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Using the Bookmark Function
You can select a desired language quickly and
easily with the AUDIO button.
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
When a DVD contains multiple angles of a
particular scene, you can use the ANGLE
function.
This feature lets you bookmark sections of a
DVD so you can quickly find them at a later
time.
Using the AUDIO button
Using the SUBTITLE button
Using the ANGLE Function
Using the Bookmark Function (DVD)
1. Press the AUDIO button.
1. Press the SUBTITLE button.
1. During play, press the SETUP button on the
remote.
If the disc contains multiple angles, the ANGLE
mark appears on the screen.
2. The Audio changes when the button is pressed
repeatedly.
2. The subtitle changes when the button is pressed
repeatedly.
- The audio languages are represented by abbreviations.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
1. Press the SETUP button and select the angle in
Function, then ANGLE icon will appear with the
current angle number and the number of angles
available.
3. To turn off the display, press the CLEAR or
RETURN button.
- Initially, the subtitle will not appear on screen.
- The subtitle languages are represented by
abbreviations.
3. Press the AUDIO button to select Stereo, Left or
Right. (On CD)
3. Select Bookmark using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
DVD
2. Select the desire angle by using the LEFT/RIGHT
button and press ENTER.
4. Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
AUDIO
ENG DOLBY DIGITAL 5.1CH
SUBTITLE
ENG
3. To remove the ANGLE icon, press the CLEAR or
RETURN button.
5. When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
CD
AUDIO
Stereo
ANGLE
4/6
Note
Note
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle
languages.
Note
Note
• How to have the same audio language come up
whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 30.
• If the disc has only one angle, this feature won’t
work. Currently, very few discs have this feature.
• If you want to playback the marked scene press
and hold PLAY/PAUSE button (
lighted number.
• How to have the same subtitle language come
up whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 31.
) at the High-
ENG-20
ENG-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 22
Using the Bookmark Function
Using the Zoom Function
SACD Playback
1. Open the disc tray.
Recalling a Marked Scene
Using the Zoom Function (DVD)
SACD Clips Menu Off Play Function
1. In Stop mode, press the MENU button until the
Clips menu is off.
2. Place the SACD disc on the tray.
- Place the SACD disc with the labeled side up.
1. During play, press the SETUP button on the
remote and select the Bookmark.
1. During play or pause mode, press the ZOOM
button on the remote.
A Zoom mark will be displayed on screen.
2. Press and hold the PLAY/PAUSE (
) button.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
2. Use the LEFT/RIGHT buttons to select a marked
scene.
3. The Display appears directly. A SACD play starts
in Menu Off mode.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
on.
3. Press and hold the PLAY/PAUSE (
skip to the marked scene.
) button to
4. Use the UP/DOWN buttons to select the desired
item.
3. Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
SACD
O ff
SACD
00:00:23
2CH
MULTI
01
Track
0 0 1 . West Side Story
:
MUSIC
1
0:00:13
Time
0 0 2 . West Side Story
0 0 3 . West Side Story
0 0 4 . West Side Story
0 0 5 . West Side Story
0 0 6 . West Side Story
:
:
:
:
:
MUSIC
MUSIC
MUSIC
MUSIC
MUSIC
2
3
4
5
6
MULTI
Audio
West Side Story
:
Prologue
REPEAT
DISPLAY
R
E
P
E
A T
D
I
S
P
L
A Y
5. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a track and to start the
playback from the desired time.
SACD Clips Menu On Play Function
Clearing a Bookmark
1. Use the UP/DOWN buttons to select a music title.
1. During play, press the SETUP button on the
remote and select the Bookmark.
2. Press the ENTER button to begin playback of the
music title.
- If you want to use the Repeat Function, press the
REPEAT button to change the mode, such as Off,
Track, Disc.
6. To make the screen disappear, press the
DISPLAY button.
2. Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
To access the desired Track when there
3. Press the CLEAR button to delete a bookmark
number.
*Off : Normal Playback
is more than one in the disc.
Track
Time
*Track : Repeats the current music track.
*Disc : Repeats the music disc in the SACD.
- If you want to see information about the Disc title
and Artist, press the DISPLAY button.
- During play or stop mode, you can change the
2CH or MULTI mode use LEFT/RIGHT button.
- On the stop mode, press the SETUP button and
select the SACD/CD in Function to playback in
regular CD mode.
Allows playback from a desired time by
using the number buttons.
Note
If you want to change the 2channel or
multi channel play or stop mode, press
AUDIO button.
• Up to three scenes may be marked at a time.
• Depending on a disc, the Bookmark function may
not work.
Audio
- 2CH : L, R
- MULTI : F/L, F/R, R/L, R/R, C/T, S/W
Note
Note
• You can use this function when SACD disc
• You can use this function when SACD disc
includes multi channel and 2 channel audio
format.
includes multi channel and 2 channel audio format.
ENG-22
ENG-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 24
SACD Playback
DVD AUDIO Playback
DVD AUDIO Playback
1. Open the disc tray.
Most DVD AUDIO discs are recorded in
Group Group, you can change Groups with this
CD Layer Play Function
REPEAT Play
1. Press the REPEAT button on the remote.
2. Select Title, Group using the LEFT/RIGHT button.
3. Press ENTER.
At SACD disc stop mode, press the SETUP button
and select the SACD/CD in Function by using
LEFT/RIGHT/UP/DOWN and then press the ENTER
button. You can playback CD layer in SACD disc.
(Refer to the page 16 to setting CD playback Func-
tion).
2. Place the DVD AUDIO disc on the tray.
Function.
-
Place the DVD AUDIO disc with the labeled side up.
Note
3. Close the tray.
- The tray closes and disc plays.
* Bonus Group playback.
• Some DVD AUDIO discs have Bonus
groups. If you want to play a Bonus
group you must enter the Bonus Group
code. The code is usually on DVD
AUDIO disc case.
REPEAT ENTER
Off
01
01
T
G
Using the Display Function
1. During play, press the DISPLAY button on the
remote.
To access the desired Track when there is
2. Use the UP/DOWN buttons to select the desired
item.
more than one on the DVD AUDIO disc.
Track
Page
If pages are included with the
DVD-AUDIO, you can see this icon.
To access the desired page, you can
use this Function.
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
CD
01
Track
AUDIO Format Display
If a slide show is included with the
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
UP/DOWN buttons.
0:00:13
Time
4. To make the screen disappear, press the
DISPLAY button again.
Slide
During DVD AUDIO playback, press the AUDIO
button to see AUDIO Format information.
• LPCM : Linear Pulse Code Modulation.
Not compressed Audio data format.
• PPCM : Packet Pulse Code Modulation.
Lossless compressed Audio data format.
DVD AUDIO
If a video zone is included with the
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
UP/DOWN buttons.
01
Group
V-zone
Time
01
Track
01
Page
0:00:13
Time
To access the desired Track when there
Allows playback of the music from a
desired time by using the number buttons.
is more than one in the disc.
Track
Time
PPCM 5.1CH
Allows playback from a desired time.
You must enter the starting time as a
reference.
Group, Index, Page Function
- Use the GROUP button to change a group.
- Use PAGE UP/DOWN buttons to Skip the Page
when there is more than one in a group.
• Some DVD-AUDIO discs include a slide show.
In the slide show mode, this function can not use.
• PAGE is still images. You can see the still images
when DVD-AUDIO disc plays .
Note
Some DVD-AUDIO discs don’t audio down-mixing.
These discs always output 5.1ch analog audio
regardless of audio setup.
Note
• Some SACD discs do not include a CD layer.
Note
• Depending on a disc, this function may not work.
Some DVD-AUDIO discs don’t allow audio
down-mixing. These discs always output 5.1ch
analog audio regardless of audio setup.
- Use INDEX +/- buttons to Skip the Index when
there is more than one in a track.
Note Depending on a disc, this function may not work.
ENG-24
ENG-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 26
Clips Menu for MP3/WMA/JPEG
Folder Selection
MP3/WMA Playback
1. Open the disc tray.
Discs with MP3/WMA/JPEG contain individual
song or pictures that can be organized into
folders as shown below.
They are similar to how you use your
computer to put files into different folders.
The folder can only be selected in the Stop
mode.
CD-R MP3/WMA discs
When you record MP3 or WMA files on CD-R,
please refer to the following.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
• To select the Parent Folder
• Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select “..” and
press ENTER to go to the parent folder.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
1. Open the disc tray.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
• To select the Peer Folder
Use the LEFT/RIGHT buttons to highlight left
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
MP3/WMA Play Function
• When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format of: Title.mp3. or Title.wma.
When composing your title, make sure that you use 8
characters or less, have no spaces in the name, and
avoid the use of special characters including: (.,/,\,=,+).
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
1. Select the desired folder.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select a song file.
• To select the Sub-Folder
O ff
Use the LEFT/RIGHT buttons to highlight right
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
3. Press ENTER to begin playback of the song file.
00:00:23
1_mp3
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
B e c a u s e Yo u
C a c t u s
O ff
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128
Kbps will not be played properly.
Sad Day
Root
00:00:23
1_mp3
WMA
JPEG
B e c a u s e Yo u
C a c t u s
Sad Day
MP3
Parent Folder
Parent Folder, Current Folder Folders and Files in
and Peer Folders Current Folder
MUSIC
Current Folder
• Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
•
•
•
: Name of currently playing file.
: Current Playback Time.
1st
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
Sub-Folders
2nd
Repeat/Random playback
SONG FILE 1
SONG FILE 2
Press the REPEAT button to change playback
mode. There are 4 modes, such as Off, Track,
Folder and Random.
: Current Playback Mode : There are 4
modes. They can be selected in order by
pressing the REPEAT button.
Peer Folders
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
- Off : Normal Playback
SONG FILE 3
- Off : Normal Playback
- Track : Repeats the current song file.
- Folder : Repeats the song files which have the
same extension in the current folder.
- Random : Song files which have the same
extension will be played in random
order.
•
Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of
Microsoft Inc) and SDMITM (registered trade mark of The
SDMI Foundation). You cannot copy such files.
- Track : Repeats the current track.
- Folder : Repeats the current folder.
- Random : Files in the disc will be played
in random order.
•
•
•
•
•
: MP3 file icon.
: WMA file icon.
: JPEG file icon.
: Folder icon.
• Important: The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
* To resume normal play, press the CLEAR button.
recordings, or as an assurance of sound quality. You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
• This unit can play a maximum of 3000 files and 300
folders per disc.
: Current Folder icon.
ENG-26
ENG-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 28
Picture CD Playback
Using the Setup Menu
Setting Up the Language Features
1. Select the desired folder. (See page 26 to select
the folder)
Note
The Setup menu lets you customize your DVD
player by allowing you to select various
language preferences, set up a parental level,
even adjust the player to the type of television
screen you have.
If you set the player menu, disc menu, audio
and subtitle language in advance, they will
come up automatically every time you watch a
movie.
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the DISPLAY button on the remote control to
display the menu again.
• Press and hold the STOP button to return to the
clips menu.
• When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
2. Use the UP/DOWN buttons to select a Picture file in
clips menu and then press the ENTER button. You
should get a screen that looks like the one below.
Using the Player Menu Language
1. With the unit in Stop mode, press the SETUP
button on the remote. Select Setup using
UP/DOWN buttons, then press the RIGHT or
ENTER button.
1. With the unit in Stop mode, press the SETUP
button.
ENTER RETURN
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can
be played.
Language Setup : Setup of the Language.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
Audio Setup : Setup of the Audio Options
• Use the DISPLAY button on the remote control to
select the menu you want to view and then press the
ENTER button.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
•
: Returns to the Album Screen.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable
movies such as those with violence, adult
subject matter, etc.
format can be played.
• To see the next 6 pictures, press the
button.
button.
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
• To see the previous 6 pictures, press the
4. Select Player Menu using UP/DOWN buttons,
then press the RIGHT or ENTER button.
•
: Each time the ENTER button is pressed, the
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
picture rotates 90 degrees clockwise.
LANGUAGE SETUP
•
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
Disc Menu
Title Menu
• A maximum of 3000 images can be stored on a single
CD.
(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
Function
Setup
•
The unit enters slide show mode.
Slide
• Kodak Picture CDs are recommended.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
*Before beginning the Slide Show, the picture interval
must be set.
5. Use the UP/DOWN buttons to select the desired
language.
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
ENTER RETURN
TIMER:
2. Use the UP/DOWN buttons on the remote to
access the different features.
• Konica Picture CD : If you want to see the Picture,
select the JPEG files in the clips menu.
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu.
3. Press the ENTER button to access the sub
features.
• QSS Picture CD : The unit cannot play QSS Picture
CD.
•
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about a 6 second interval.
To make the setup screen disappear after setting
up, press the SETUP button again.
• If the number of files in 1 Disc is over 3000, only 3000
JPEG files can be played.
6. Press the ENTER button.
• If the number of folders in 1 Disc is over 300, only
JPEG files in 300 folders can be played.
•
•
: The pictures change automatically with about
a 12 second interval.
Note
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
- To make the SETUP menu disappear, press the
RETURN or LEFT button.
Depending on a disc, some Setup Menu selections
may not work.
: The pictures change automatically with about
a 18 second interval.
*Depending on a file size, the amount of time between
each picture may be different from the manual.
*If you don’t press any button, the slide show will start
automatically in about 10 seconds by default.
ENG-28
ENG-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 30
Setting Up the Language Features
Setting Up the Language Features
Setting Up the Language Features
Setting Up the Audio Options
1. With the unit in Stop mode, press the SETUP
button.
Using the Disc Menu Language
Using the Audio Language
Using the Subtitle Language
This function changes the text language only on the
disc menu screens.
1. With the unit in Stop mode, press the SETUP
button.
1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
3. Select Language Setup using UP/DOWN
3. Select Language Setup using UP/DOWN
press the RIGHT or ENTER button.
buttons, then press the RIGHT or ENTER button.
buttons, then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
4. Select Audio using UP/DOWN buttons, then
4. Select Subtitle using UP/DOWN buttons, then
buttons, then press the RIGHT or ENTER button.
press the RIGHT or ENTER button.
press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
5. Use the UP/DOWN buttons to select the desired
5. Use the UP/DOWN buttons to select the desired
press the RIGHT or ENTER button.
language.
language.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
AUDIO LANGUAGE
DISC MENU LANGUAGE
AUDIO SETUP
Disc Menu
Audio
Digitall Output
:
PCM
SUBTITLE LANGUAGE
Autommatic
DTS
:
:
:
Off
On
On
Dynamic Compression
PCM Down Sampling
Speaker Setup
Original
Others
Others
Subtitle
Others
6. Press the ENTER button.
- The language is selected and the screen returns to
6. Press the ENTER button.
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
Digital Output
LANGUAGE SETUP menu.
6. Press the ENTER button.
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
Note
Note Even when PCM Down sampling is Off
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
•
Some discs will only output down sampled
audio through the digital outputs.
•
High sampling rate DVD-Audio discs
(192KHz or 176.4KHz) always output audio
down sampled to 96KHz or 88.2KHz through
the digital outputs.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
•
When playing LPCM or PPCM DVD
protected by copyright. If digital audio source
is 48KHz/16bit the Digital output is mute.
ENG-30
ENG-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 32
Setting Up the Audio Options
Surround Sound Speaker Setup
Surround Sound Speaker Setup
Setting Up the Display Options
DTS
1. With the unit in Stop mode, press the SETUP
button.
The default settings : FRONT L, R (Small),
CENTER (Small), SURROUND (Small) Select the
size of the speakers to be connected.
1. With the unit in Stop mode, press the SETUP
button.
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
• Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the surround
sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
speaker from the subwoofer.
Note There is no analog audio output when you play
DTS sound disc.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
• Center
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
- None: If you do not connect a center speaker,
select this.
- Large: Normally select this.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
center speaker from other speakers.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
Speaker Setup
• Surround (SL, SR)
- None: If you do not connect a surround speaker,
select this.
4. Use the UP/DOWN buttons to select Speaker
Setup. Then press the RIGHT or ENTER button.
Note
DISPLAY SETUP
- Large (Rear/Side): Normally select either of these
according to the rear speaker’s position.
- Small (Rear/Side): When the sound distorts or the
surround sound effects are difficult to hear, select
either of these according to the rear speaker’s
position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass
frequencies of the rear speaker from other
speakers.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
TV Aspect
:
:
:
:
:
Wide
Auto
On
AUDIO SETUP
Still Mode
Digital Output
:
PCM
Screen Messages
Front Display
Black Level
Auto Dim
On
DTS
:
:
:
Off
On
On
Dynamic Compression
PCM Down Sampling
Speaker Setup
• Manufactured under license from Dolby Laborato-
ries. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
• In case of DVD-Audio
TV Aspect
Digital output discs will be output as 2 channel
Discs that prohibit downmixing also mute the
digital output.
5. Use the UP/DOWN or LEFT/RIGHT buttons to
select the desired item. Then press the ENTER
button.
Setting up TEST
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
The test output signals come clockwise starting from
the Front Speaker(L). Adjust Channel Balance to
match to the volume of test signals memorized in
the system.
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
• In case of SACD
Digital output is mute.
SPEAKER SETUP
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
FRONT(L) ➝ CENTER ➝ SUBWOOFER (LFE)➝
FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
On
3. 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
Note
How to make the SETUP menu disappear or return
to menu screen during set up. Press RETURN or
LEFT button.
• The subwoofer test output signal is lower than the
other speakers.
• The MPEG Multichannel logo is a trademark
registered by PHILIPS Corporation.
• If you Set Front (FL, FR) “Small”, LFE is sat “On”
automatically.
ENG-32
ENG-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 34
Setting Up the Display Options
Setting Up the Parental Control
Setting Up the Parental Control
CREATE PASSWORD
The Parental Control function works in conjunction
with DVDs that have been assigned a rating - which
helps you control the types of DVDs that your family
watches. There are up to 8 rating levels on a disc.
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
Re-enter Password
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
-
-
-
-
2. Field : Select this feature when the screen shakes in
the Auto mode.
1. With the unit in Stop mode, press the SETUP
button.
0 ~ 9
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Screen Messages
Use to turn on-screen messages On or Off.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Front Display
6. Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim
automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Black Level
Adjusts the brightness of the screen.(On/Off)
Setting Up the Rating Level
e.g) Setting up in LEVEL6.
1. With the unit in Stop mode, press the SETUP button.
RATING LEVEL
4. Use RIGHT or ENTER to select Yes if you want
to use a password.
The Enter Password screen appears.
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
The player is locked (
).
Level 3
Level 2
Level 1 Kids Safe
PARENTAL SETUP
Use Passsword
:
No
About the Change Password;
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
The Change Password screen appears.
- Enter your new password. Enter the new password again.
5. Enter your password.
The Re-enter Password screen appears to
confirm the password.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Enter your password again.
4. Enter your password.
The Parental Setup screen appears.
Note
The player is locked (
).
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
CREATE PASSWORD
PASSWORD CHECK
• If you have forgotten your password, see Forgot
Password in the Troubleshooting Guide.
Enter Password
Enter Password
-
-
-
-
-
-
-
-
0 ~ 9
0 ~ 9
ENG-34
ENG-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 36
Controlling a TV with the Remote
Troubleshooting
The remote control can be competible with various
brands of TV by setting their control codes. The
TOSHIBA code has initlally been set to control
TOSHIBA TVs.
Table of Brand Codes
Before requesting service (troubleshooting), please check the following.
Action
Problem
Page
BRAND
TOSHIBA
CODE
PROG + 01
• Check the batteries in the remote. They may need replacing.
• Operate the remote control within 30 angle on either side of the
remote sensor, up to a distance of no more than 23 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
No operations can be
performed with remote.
Setting Control Codes
RCA/GE
PROG + 02
PROG + 03
PROG + 04
PROG + 05
PROG + 06
PROG + 07
PROG + 08
PROG + 09
PROG + 10
PROG + 11
PROG + 12
PROG + 13
PROG + 14
PROG + 15
PROG + 16
SONY
P5
P7
1. Press TV to set the remote control operating your
TV.
MITSUBISHI
JVC
2. While holding down PROG button enter the two
digits of your TV’s brand code (listed right) using
number buttons.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc does not play.
HITACHI
PANASONIC A
SHARP NEW
SANYO
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following condi-
tions are met. :
3. Release PROG.
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
4. Point the remote control at your TV and use each
button listed below to make sure your TV is
operated correctly.
P12
MAGNAVOX
GOLDSTAR NEW
SAMSUNG
SHARP OLD
ZENITH
P31~32
TV POWER
CH
To turn the TV on or off.
To select TV channels in the
upper or lower direction.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
The
screen.
icon appears on
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P14
TV VOL.
To adjust the sound level.
PANASONIC B
PIONEER
I.SELECT
To select an external source
such as a VCR.
Number buttons
To select TV channels.
When selecting channels 1 to
9, first enter 0 and then the
desired number.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
Play mode differs from the
Setup Menu selection.
P29~35
100
To substitute for 100 channel
key.
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVD discs.
P33
DISPLAY
ENTER
To turn on or off TV’s screen
display.
No audio.
• Make sure you have selected the correct Digital Output in the
Audio Options Menu.
P31~32
To use for the TV’s ENTER
key.
• Press power on from a cold start with no disc in the unit. Press the
The screen is blocked
STOP (
) and PLAY (
) buttons simultaneously on the front
P14
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Important Note
Forgot password
• Press power on from a cold start with no disc in the unit. Press the
• Some TV’s may not respond to all the operations
above, or may not be operated at all with this
remote control. In this case, operate your TV with
its own remote control.
STOP (
) and PLAY (
) buttons simultaneously on the front
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Press the SETUP select Setup, then press RIGHT or ENTER.
Press Up or Down to select Parental Setup. The Parental Setup is
now unlocked as indicated on the display. You can change your
password.
P34~35
• For some brands, several control codes (brand
codes) are allocated. Try each of them until the
buttons work on your TV.
• If you replace the remote control’s batteries, set
the brand code again.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If you experience other
problems.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
ENG-36
ENG-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 38
Specifications
Limited Warranty DVD Players
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROMTHE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
Power Requirements
Power Consumption
Weight
AC 120 V, 60 Hz
13W
9.5 lbs
General
Dimensions
(W) 16.9 in x (D) 15.7 in x H 2.7 in
+41°F to +95°F
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE
WARRANTIES.
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE
WARRANTIES.
Reading Speed : 11.45 ~ 15.09 ft/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
DVD
(DIGITAL VERSATILE DISC)
Limited Ninety (90) Day Warranty on Labor*
TACP warrant this DVD Player and its parts
against defects in materials or workmanship for a peri-
od of ninety (90) days after the date of original retail
purchase. DURING THIS PERIOD, TACP WILL, AT
TACP’s OPTION, REPAIR OR REPLACE A DEFEC-
TIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR
LABOR. YOU MUST DELIVER THE ENTIRE DVD
PLAYERTO AN AUTHORIZED TACP
Owner’s Manual and Demographic Card
You should read this owner’s manual thoroughly
before operating this DVD PLAYER. You
should complete and mail the enclosed Demographic
card within ten days after you, or the person who has
given you this product as a gift, purchased this DVD
PLAYER. This is one way to enable
TACP to provide you with better customer service and
improved products. Failure to return the Demographic
card will not affect your rights under this warranty.
CD : 5"
(COMPACT DISC)
Reading Speed : 15.75 ~ 18.37 ft/sec.
Maximum Play Time : 74 min.
Disc
Reading Speed : 15.75 ~ 18.37 ft/sec.
Maximum Play Time : 20 min.
CD : 31/2"
(COMPACT DISC)
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video
SERVICE STATION. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO AND FROM
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
Output
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
THE SERVICE STATION.
FOLLOWING CONDITIONS:
S-VIDEO
(1) You must provide your bill of sale or other proof of
purchase.
Limited One (1) Year Warranty on Parts*
L(1/L), R(2/R)
2 Channel
TACP further warrant the parts in this DVD Player
against defects in materials or workmanship
for a period of one (1) year after the date of original
retail purchase. DURING THIS PERIOD, TACP WILL,
AT TACP ’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED
PART WITHOUT CHARGE TO YOU FOR THE PART,
PROVIDED THAT IF A DEFECTIVE PART IS
REPAIRED OR REPLACED AFTER NINETY (90)
DAYS FROM THE DATE OF ORIGINAL RETAIL
PURCHASE, THE CONSUMER PAYS ALL LABOR
CHARGES INVOLVED IN THE REPAIR OR
REPLACEMENT. YOU MUST DELIVER THE ENTIRE
DVD PLAYER TO AN AUTHORIZED
(2) All in-warranty servicing of this DVD PLAYER
must be made by a specified
F/L, F/R, R/L, R/R, C/T, S/W
5.1 Channel
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
Audio
Authorized TACP Service Station.
*Frequency Response
Output
(3) The warranties from TACP are effective only if the
DVD PLAYER is purchased and
110 dB
100 dB
0.004 %
*S/N Ratio
*Dynamic Range
operated in the U.S.A. or Puerto Rico.
*Total Harmonic Distortion
(4) Labor service charges for set installation, set up,
adjustment of customer controls and installation
or repair of hook up related items and/or antenna
systems are not covered by these warranties.
Reception problems caused by inadequate
antenna systems are your responsibility.
*: Nominal specification
• Toshiba Electronics Co., Ltd reserves the right to change the specifications without notice.
TACP SERVICE STATION. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO AND FROM
• Weight and dimensions are approximate.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend
to any DVD PLAYER or parts which
THE SERVICE STATION.
*Rental Units
have been lost or discarded by you or to damage
to DVD PLAYER or parts caused by
The warranty for rental units begins with the first
rental or thirty (30) days from the date of shipment
to the rental firm, whichever comes first.
misuse, accident, Acts of God, such as lightning
or fluctuations in electric power, improper installa-
tion, improper maintenance or use in violation of
instructions furnished by TACP; or to units which
have been modified or had the serial number
removed, altered, defaced or rendered illegible.
*Commercial Units
DVD PLAYER(s) sold and used for
commercial purposes have a limited ninety (90) day
warranty.
ENG-38
ENG-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 40
How to Obtain Warranty Services
HOW STATE LAW RELATES TO WARRANTY
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO STATE
IN THE U.S.A. SOME STATES OF THE U.S.A. DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, WHEN AN ACTION
MAY BE BROUGHT, OR THE EXCLUSION OR LIMI-
TATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU UNDER
SUCH CIRCUMSTANCES.
If, after following all of the operating instructions in this
manual and checking the section "Troubleshooting",
you find that service is needed:
(1) For instructions on how to obtain warranty service
for your DVD Player, contact TACP Call
Center’s toll free number at 1-866-583-7353.
(2) You must include a copy or original bill of sale or
other proof of purchase along with the entire DVD
PLAYER to the Authorized TACP
Service Station specified by the Call Center. You
must pay for all transportation and insurance
charges for the DVD PLAYER to the
Service Station.
For additional information, visit TACP’s web site:
Time for Taking Action
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY LIMITED TO THE DURATION OF THE
LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED
BY THE LAW OF ANY STATE OF THE U.S.A. AS
HEREBY LIMITED, THE FOREGOING WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, GUARANTEES, AGREEMENTS AND
SIMILAR OBLIGATIONS OF TACP WITH RESPECT
TO THE REPAIR OR REPLACEMENT OF ANY
PARTS. IN NO EVENT SHALL TACP OR BE
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES.
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time
within which action must be commenced to enforce
any obligation of TACP arising under this warranty or
under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you
discovered or should have discovered, the defect. This
limitation does not apply to implied warranties arising
under the law of any state of the U.S.A.
ENG-40
Download from Www.Somanuals.com. All Manuals Search And Download.
|