Toshiba DVD Player SD 185 User Manual

SD-185/186EKE

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

18. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal

injury and apparatus malfunction.

19. If the apparatus should smoke or smell,immediately disconnect the power cord from the wall outlet. Wait until the

smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause ﬁre.

20. While it is thundering, do not touch the connecting cables or the apparatus.

SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical

equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the

points below for your own safety. They are of a general nature, intended to help you with all your electronic consumer

products and some points may not apply to the goods you have just purchased.

read the operating instructions before you attempt to use the equipment.

ensure that all electrical connections (including the mains plug, extension leads and inter- connections between

the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and

withdraw the mains plug before making or changing connections.

consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

be careful with glass panels or doors on equipment.

remove any ﬁxed cover as this may expose dangerous voltages.

DON'T

obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc.

Overheating will cause damage and shorten the life of the equipment.

allow electrical equipment to be exposed to dripping or splashing, or objects ﬁlled with liquids, such as vases,

to be placed on the equipment.

DON'T

place hot objects or naked ﬂame sources such as lighted candles or nightlights on, or close to equipment. High

temperatures can melt plastic and lead to ﬁres.

use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the

DON'T

manufacturer's approved stand or legs with the ﬁxings provided according to the instructions.

listen to headphones at high volume, as such use can permanently damage your hearing.

leave equipment switched on when it is unattended unless it is specifically stated that it is designed for

unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that

DON'T

your family know how to do this. Special arrangements may need to be made for inﬁrm or handicapped people.

continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any

way -switch off, withdraw the mains plug and consult your dealer.

DON'T

ABOVE ALL

-NEVER let anyone especially children push anything into holes, slots or any other

opening in the case - this could result in a fatal electrical shock;

-NEVER guess or take chances with electrical equipment of any kind

-it is better to be safe than sorry!

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁ

Introduction

CAUTION:

This Digital Video Disc Player employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference

Should the unit require maintenance, contact an authorized service location.

Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in

hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.

Visible and invisible laser radiation when open and interlocks defeated.

DO NOT STARE INTO BEAM.

CAUTION: These servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of

electric shock do not perform any servicing other than that contained in the operating instructions unless you are

qualiﬁed to do so.

Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from the

mains power, pull out the power plug from the wall outlet.

Environmental Information

All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials;

cardboard (box), polystyrene foam (buffer) and polyethylene (bags,protective foam sheet).

Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.

Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old

equipment.

LASER

Type

Semiconductor laser

InGaAIP(DVD)

AIGaAs(CD)

Wave length

658 nm(DVD)

790 nm(CD)

Output Power

10.0 mW(DVD)

7.0 mW(VCD/CD)

Beam divergence 60 degrees

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.

Model No.

Serial No.

Retain this information for future reference.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

CAUTION!

WARNING:

Do not use solvents such as benzene, thinner,

commercially available cleaners, or anti-static sprays

intended for analog discs. Since the optical unit

(laser) of the DVD system operates at a higher

power than regular DVD or CD players, cleaning

CDs intended for DVD or CD players may damage

the optical unit (laser). Therefore, refrain from using

a cleaning CD.

RISK OF ELECTRIC SHOCK!

Never attempt to service this product yourself.

Opening and removing the covers may expose you

to dangerous voltage or other hazards. Failure to

follow this WARNING may result in death or serious

injury. Refer all servicing not speciﬁed in this manual

to a Toshiba Authorized Service Center.

Moisture Condensation

Setup

Moisture condensation damages the DVD player.

Please read the following carefully. Moisture

condensation occurs, for example, when you pour a

cold drink into a glass on a warm day. Drops of water

form on the outside of the glass. In the same way,

moisture may condense on the optical pick-up lens

inside this unit, one of the most crucial internal parts

of the DVD player.

Finding a suitable location

-Place the set on a ﬂat, hard and stable surface.

-Do not place the set on a carpet.

-Do not position the set on top of other equipment

that might heat it up (e.g., receiver or ampliﬁer).

-Do not put anything under the set

(e.g.CDs, magazines).

-Install this unit near the AC outlet and where the

AC power plug can be reached easily.

If you use the DVD player in such a situation, it may

damage discs and internal parts. Remove the disc,

connect the power cord of the DVD player to the wall

outlet, turn on the DVD player, and leave it for two or

three hours. After two or three hours, the DVD player

will have warmed up and evaporated any moisture.

Keep the DVD player connected to the wall outlet

and moisture

Space for ventilation

-Place the apparatus in a location with adequate

ventilation to prevent internal heat build up. Allow at

least 10 cm (4.0'') clearance from the rear and the

top of the set and 5 cm (2.0'') from the left and right

to prevent overheating.

condensation will seldom occur.

5cm (2.0")

10cm (4.0")

5cm (2.0")

10cm (4.0")

Region Codes

This DVD player is designed to support the Region

Management System. Check the regional code

number on the disc package. If the number does

not match the player' s region number (see table on

page 5), the player may be unable to playback the

disc.

Avoid high temperatures, moisture, water and

dust

-Apparatus shall not be exposed to dripping or

splashing.

-Do not place any sources of danger on the

apparatus (e.g., liquid ﬁlled objects, lighted candles).

Tips:

-It may not be possible to play CD-R/RW , DVD⁺R/

RW , or DVD⁺R DL in all cases due to the type of

disc or condition of the recording.

Cleaning discs

-If you are having trouble playing a certain disc,

remove the disc and try a different one. Improperly

formatted disc will not play on this DVD Player.

Some problems occur because the disc inside the

system is dirty (frozen picture, sound disruptions,

picture distortions). To avoid these problems, discs

should be cleaned on a regular basis.

To clean a disc, use a micro ﬁbre cleaning cloth

and wipe the disc from the center to the edge in a

straight line. Do not touch the playback side of the

disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢃ

Introduction

Discs that can

be played

Region

U.S.A. and

Canada regions

ALL

U.K.,

Europe regions and

Japan

EU Conformity Statement

ALL

“This product is marked with “CE” and complies therefore

with the applicable harmonized European standards

listed under the Low Voltage Directive 2006/95/EC and

the EMC Directive 2004/108/EC.”

Asia Paciﬁc,

Taiwan, Korea

Responsible for CE-marking is TOSHIBA INFORMATION

SYSTEMS (U.K.) LTD, Toshiba Court, Weybridge

Business Park, Addlestone Road, Weybridge,Surrey,

KT15 2UL, United Kingdom.

Australia,

New Zealand,

Latin America

Following information is only for EU-

member States:

Russia and

India regions

The use of the symbol indicates that this

product may not be treated as household

waste. By ensuring this product is disposed

of correctly, you will help prevent potential

negative consequences for the environment

and human health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please

contact your local city ofﬁce, your household

waste disposal service or the shop where you

purchased the product.

China, Calcos Islands,

Walls and Futuna

Islands

Unauthorized copying, broadcasting, public

performance and lending of discs are prohibited.

Following information is only valid EU-

member States:

Disposal of batteries and/or accumulators

This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

Pb,Hg,Cd

The crossed out wheeled dust bin symbol

indicates that batteries and/or accumulators

must be collected and disposed of separately

from household waste.

If the battery or accumulator contains more

than the specified values of lead (Pb),

mercury (Hg), and/or cadmium (Cd) defined

in the Battery Directive (2006/66/EC), then

the chemical symbols for lead (Pb), mercury

(Hg) and/or cadmium (Cd) will appear below

the crossed out wheeled dust bin symbol.

Notes on copyright

The unauthorized recording, use, distribution, or revision

of television programs, videotapes, DVDs and other

materials, is prohibited under the Copyright Laws of the

United States and other countries, and may subject you

to civil and/or criminal liability.

By participating in separate collection of

batteries, you will help to assure the proper

disposal of products and batteries and

thus help to prevent potential negative

consequences for the environment and

human health.

For more detailed information about the

collection and recycling programmes available

in your country, please contact your local city

office or the shop where you purchased the

product.

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Table of Contents

Introduction

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

Setup

1-3

Cleaning discs

Moisture Condensation

Region Codes

Table of Contents

4-5

Connections

Connecting to television

7-8

Connecting to a Stereo System

Connecting to a Digital AV Receiver

Connecting the power cord

Product Overview

Front and Rear panels

Remote Control

Getting Started

Inserting Batteries

Finding your viewing channel

Setting up Progressive Scan feature

Setting the language

12-13

^.Playback from Disc

Playable discs

13-14

Playback Feature

Starting disc playback

Basic playback control

14-15

15-16

Operations for video playback (DVD/VCD/SVCD)

Selecting various repeat functions

Viewing the disc playback Information

Special DVD Features

Special VCD and SVCD Features

Playing a DivX Disc

Playing JPEG/Kodak picture CD

17-18

DVD menu Options

Using the Language setup menu

Using the Video setup menu

Using the Audio setup menu

Using the Rating setup menu

Using the Misc (Miscellaneous) setup menu

Tray Lock

18-20

20-21

21-22

Others

Speciﬁcations

Troubleshooting

Glossary

24-25

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢄ

Connections

TV, use the audio cables(white/red)to connect

AUDIO OUT(L/R)jacks of the DVD player to

corresponding AUDIO IN jacks on the TV(cable

not supplied).

Connecting to television

IMPORTANT!

Using Component Video Jacks(Y, PB, PR)

– You only need to make one video connection

from the following options, depending on the

capabilities of your television.

– Connect the DVD player directly to the

television.

Using SCART socket

MAINS

IMPORTANT!

-The progressive scan video quality is only

possible when using Y, PB, PR and a progressive

scan TV is required.

Use the component video cables (red/blue/green) to

connect the DVD player' s Y, PB, PR jacks to the

corresponding Component video input jacks (or

labelled as Y, Pb, Pr) on the TV (cable not supplied).

Use the audio cables (white/red) to connect AUDIO

OUT (L/R) jacks of the DVD player to the

corresponding AUDIO IN jacks on the TV(cable not

supplied).

Use the scart cable to connect the DVD SCART OUT

to the corresponding scart input socket on the TV

(cable not supplied).

If your DVD player will not be connected to a Stereo

System or AV Receiver to hear better sound, scart is

enough for both audio and video connections.

Proceed to page 12 for detailed Progressive Scan set

up.

Using Composite Video Jack(CVBS)

Using a RF modulator

Use the composite video cable (yellow) to connect

the DVD player' s VIDEO(CVBS) jack to the video

input jack(or labelled as A/V in,Video In or

Composite) on the TV(cable not supplied).

To hear the sound of this DVD player through your

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

IMPORTANT!

-If your TV only has a single Antenna In jack (or

labelled as 75 ohm or RF In), you will need an RF

modulator in order to view the DVD playback on

the TV.

Connecting to a Stereo System

Use the composite video cable (yellow) to connect

the DVD player' s VIDEO (CVBS) jack to the video

input jack on the RF modulator (cable not supplied).

To hear the sound of this DVD player through your

TV, use the audio cables(white/red) to connect

AUDIO OUT (L/R) jacks of the DVD player to the

corresponding AUDIO IN jacks on the RF modulator

(cable not supplied).

Use the RF coaxial cable (not supplied) to connect

ANTENNA OUT or TO TV jack on the RF modulator

to the ANTENNA IN jack on the television.

Connect the Antenna or Cable TV service signal to

the ANTENNA IN or RF IN jack on the RF modulator.

(It may have been connected to your TV previously.

Disconnect it from the TV.)

MAINS

Stereo system has Dolby Pro Logic or Right/Left

Audio In Jacks

Select one of the video connections (CVBS VIDEO

IN, SCART IN or COMPONENT VIDEO IN)

depending on the options available on your TV.

Use the audio cables (white/red) to connect AUDIO

OUT (L/R) jacks of the DVD Player to the

corresponding AUDIO IN jacks on the stereo system

(cable not supplied).

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢆ

Connections

Connecting to a Digital AV Receiver

Connecting the power cord

MAINS

After everything is connected properly, plug in the AC

power cord to the power outlet.

Never make or change any connections with the

power switched on.

Receiver has a PCM, Dolby Digital or MPEG

decoder

Select one of the video connections (CVBS VIDEO

IN, SCART IN or COMPONENT VIDEO IN)

depending on the options available on your TV.

Connect the COAXIAL jack of the DVD player to the

corresponding Digital Audio In jack on your Receiver

(cable not supplied).

Set the DVD Player' s Digital Output to PCM or All

depending on the capabilities of your Receiver (see

page 20 {Digital Output}).

Tip:

-If the audio format of the Digital Output does not

match the capabilities of your receiver, the receiver

will produce a strong, distorted sound or no sound at

all.

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

Product Overview

Front and Rear panels

I/2ON/STANDBY

-Turns the player on or switches it to

standby mode

Disc tray

- Place a disc here

B/X PLAY/ PAUSE

-Starts or pauses playback

Display

- Shows information about the current status of the

DVD Player

STOP

- Stops playback

IR Sensor

- Points the remote control towards this sensor

çOPEN/CLOSE

- Opens or closes the disc tray

MAINS ~

- Connects to a standard AC outlet

SCART OUT

- Connects to SCART input of a TV

AUDIO OUT (Left/Right)

- Connects to Audio input of a TV, an ampliﬁer,

receiver or stereo system

Y, PB, PR Component Video Out

- Connects to Y, PB, PR input of a TV

COAXIAL(Digital audio out)

- Connects to coaxial Audio input of a digital audio

equipment

VIDEO Out (CVBS)

- Connects to CVBS Video input of a TV

DVD display

The indicators vary depending on the kinds of disc

you play.

DVD video disc

VIDEO CD

Audio CD

Chapter/Track

number indicator

•During playback:

Example

•During playback:

Example

•During playback:

Example

Some discs may only Some discs may only Some discs may only

display chapter

numbers.

display track

numbers.

display track

numbers.

Multifunctional indicator (indicates

operating status or messages, etc.)

OPEN

LOAD/CLOSE

No disc

Bad disc

"----" may also appear in other situation.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ0

Product Overview

Remote Control

See the page in [ ] for details.

[ 16 ]

REMOTE SIGNAL EMITTER

DISPLAY

[ 12 ]

-Displays information on

-Point remote control to the sensor on

TV screen during playback

the front panel

[ 12, 14 ]

ON / STANDBY

[ 14 ]

OPEN/CLOSE

-To switch the DVD player to ON or

-Open/close the disc tray

standby mode

[ 14, 16, 21 ]

-Selects numbered items in a menu

Number Buttons

[ 16 ]

T - SEARCH

-Start playback from a designated

-Press to enter track/chapter/title

numbers or password directly

point

[ 13, 18 ]

SETUP

-Enters or exits the system setup

[ 14 ]

+10 button

-Press to enter number greater than 9

-Press +10 button repeatedly to select

10,20,30...etc

   [ 15, 17, 18 ]

-Cursor buttons for moving to the left

/ right / up / down

-To rotate the JPEG picture during

playback

[ 15, 16 ]

-Enters or exits the disc menu

-Switches on or off the Playback

Control (PBC) mode (for VCD 2.0 /

SVCD only)

STEP

-Play video frame by frame

[ 14, 15 ]

-Starts or pauses playback

[ 15 ]

PLAY/PAUSE

[ 13 ]

-Acknowledge menu selection

STOP



-Stops play

[ 16 ]

RETURN

-To go back to previous menu

[ 16 ]

SUBTITLE

-To access subtitle language

[ 16 ]

-Show title menu

TITLE

[ 16 ]

ANGLE

-Switch the camera angle during

playback

[ 16 ]

AUDIO

[ 15 ]

F.R & F.F

-Selects an audio setting (DVD) or an

audio channel (VCD)

-Do a forward/reverse search

[ 14, 16 ]

PREV & NEXT

-Skip to previous / next chapter /track

[ 15, 18 ]

ZOOM

-Enlarge a picture on the TV

[ 15 ]

REPEAT

-Selects various repeat mode

[ 17 ]

RANDOM

-Toggles between Normal and Shufﬂe

[ 16 ]

A-B

playback

-Repeats playback from point A to B on

a disc

[ 15 ]

PROG

-To program playback or cancel the

program playback

[ 15 ]

SLOW

-Do a slow forward

[ 15 ]

CLEAR

-Delete the mistyped entries or cancel

some functions

ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

and highest channels and may be called FRONT,

A/V IN or VIDEO. See your TV' s manual for more

details.

Inserting Batteries

Or, you may go to channel 1 on your TV, then

press the Channel down button repeatedly until you

see the Video In channel.

Or, the TV remote control may have a button that

chooses different video modes.

Or, tune the TV until you can see the DVD player

signal from the RF modulator (refer to your TV user

manual).

If you are using external equipment, (such as

audio system or receiver), turn it on and select the

appropriate input source for the DVD player output.

Refer to the equipment user’s manual for detail.

Open the battery compartment.

Insert two batteries type R03 or AAA, following the

indications (+ / - ) inside the compartment.

Close the cover.

Setting up Progressive Scan feature

CAUTION:

Never throw batteries into a ﬁre.

Note:

(For Progressive Scan TV only)

- Be sure to use AAA size batteries.

- Dispose of batteries in a designated disposal area.

- Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in

accordance with applicable laws and regulations.

- If the remote control does not operate correctly, or if

the operating range becomes reduced, replace batteries

with new ones.

- When necessary to replace batteries in the remote

control, always replace both batteries with new ones.

Never mix battery types or use new and used batteries

in combination.

- Always remove batteries from remote control if they

are dead or if the remote control is not to be used for an

extended period of time. This will prevent battery acid

The progressive scan display twice the number

of frames per seconds than interlaced scanning

(ordinary normal TV system). With nearly double

the number of lines, progressive scan offers higher

picture resolution and quality.

Before you start...

-Ensure that you have connected this DVD player

to a progressive scan TV using the Y, PB, PR

connection (see page 7).

-Ensure that you have completed the basic

installation and set up.

Turn on your TV and select the video input

connected to the DVD player (refer to your TV user

manual).

Press 2ON/STANDBY on the remote control to turn

on the DVD player.

from leaking into the battery compartment.

Using the Remote Control to Operate

the System

The blue DVD background screen will appear on

the TV.

Press SETUP.

Press / to select { Video }, then press .

Aspect Ratio

: 4:3

Language

Video

View Mode

TV System

Video Out

:Auto Fit

:PAL

Within about 6m (19 feet)

Component

RGB

Smart Picture

Audio

OPEN/CLOSE DISPLAY

ON/STANDBY

P-Scan

Rating

Misc

Aim the Remote Control directly at the remote sensor

(IR) on the front panel.

Do not put any objects between the Remote Control

and DVD Player while operating the DVD Player.

Press / to select { Video Out }, then press .

Select { P- Scan }, then press OK to conﬁrm.

The menu will appear on the TV.

Video Out

Finding your viewing channel

Activating Progressive Scan 1. Ensure

your TV supports Progressive Mode

2. If there is a distorted picture on the

TV, wait 15 seconds for automatic

recover

Press I/2ON/STANDBY on the DVD player to turn it

on.

Turn on the TV and set it to the correct video-in

channel. You should see the blue DVD background

screen.

Yes

Usually these channels are between the lowest

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢁ

Getting Started/Playback from disc

soundtrack from audio, subtitles and DVD menu

languages. If the language selected is not available

on the disc, the disc’s default language will be used

instead.

Press  to highlight { Yes } and press OK to conﬁrm.

 The reconﬁrmation menu will appear on the TV.

Video Out

Confirm again to use new setting

OSD language : English

Language

Subtitle

: Off

Yes

DivX Subtitle

Audio

: Standard

English

Video

Audio

Press  to highlight { Yes } and press OK to conﬁrm.

 The setup is now completed and you can start

enjoying the high quality picture.

DVD Menu

German

Polish

Rating

Misc

Hungarian

Portuguese

To deactivate Progressive Scan

manually:

Wait for 15 seconds for the auto recovery.

Press SETUP.

Press / to select { Language }, then press .

Press / to highlight one of the options below,

then press .

{ Subtitle }

Select this to change the subtitle language.

{ Audio }

Press OPEN/CLOSE çon the DVD player to open

the disc tray.

Press number button ' 1 ' on the remote control for a

few seconds.

The DVD background screen appears.

Select this to change the disc soundtrack language.

{ DVD Menu }

Tip:

Select this to change the language of the disc menu.

Use / to select a language and press OK to

conﬁrm.

-There are some progressive scan TVs and High-

Deﬁnition TVs that are not fully compatible with this

unit, resulting in the unnatural picture when playing

back a DVD VIDEO disc in the progressive scan

mode. In such a case, turn off the progressive scan

feature on both the DVD player and your TV.

Repeat steps C - D for other language settings.

IMPORTANT!

-DVD discs and players are designed with regional

restrictions. Before playing a disc, make sure the

disc is for the same zone as your player.

Setting the language

-If '

'appears on the TV screen when a button is

pressed, it means the function is not available on

the current disc or at the current time.

Choose your desired On-Screen Display(OSD)language

where available.

On-Screen Display (OSD) Language

Playable discs

The On-screen language for the system setup menu

will remain as you set it, regardless of various disc

languages.

Using this DVD player, you can playback on the

following discs. Some of these discs may be

incompatible.

OSD language

Subtitle

English

Deutsch

Language

Video

DVD Video disc(Digital Versatile Disc)

DivX Subtitle

Audio

Polski

Hungarian

: English

Audio

Rating

Misc

DVD Menu

: English

Português

DVD⁺R/RW (DVD Recordable / Re-

writable), DVD⁺R DL (Dual layer)

Audio/Video formats or

JPEG ﬁles.

Press SETUP.

Press / to select { Language }

Press  to highlight { OSD language }, then press

.

CD-R (CD-Recordable)

Audio/Video format or

JPEG ﬁles.

Press / to select a language and press OK.

Audio, Subtitle and DVD menu

language

You can choose your own preferred language or

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢀꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback from disc/Playback Feature

CD-RW (CD-Rewritable)

Audio/Video format or

JPEG ﬁles.

– For DVD+R and DVD+RW multi border , both

ﬁnalized and unﬁnalized disc cannot be supported.

Audio CD (Compact Disc

Digital Audio)

Starting disc playback

Video CD

(Formats 1.0, 1.1, 2.0)

Turn on the TV and select the video input connected

to the DVD player.

Press 2ON / STANDBY to turn on the DVD player.

Press OPEN/CLOSE to open the disc tray.

Place a disc onto the disc tray with the label facing

up, then press OPEN/CLOSE.

Super Video CD

For double-sided discs, load the side which you

want to play facing up.

Playback may start automatically. If not, press PLAY/

is a trademark of DVD Format/Logo Licensing

Corporation.

PAUSE

If a disc menu appears on the TV, see page 15

'Using the disc menu'.

If the parental control was activated for the

inserted disc, you have to enter your four-digit

Because of problems and errors that can occur

during the creation of DVD and CD software and/or

the manufacture of DVD and CD discs, Toshiba

cannot assure that this DVD player will successfully

play every disc bearing the DVD and CD logos. If you

happen to experience any difficulty playing a DVD

and/or CD disc on this DVD player, please contact

Toshiba Customer Service.

password, see page 21.

For more playback features, see pages 14 - 18.

Tips:

-Do not overturn the DVD player while disc loading,

playing or ejecting.

-Do not close the disc tray manually even if the

power is switched off.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve

optimal playback quality. There are many different

types of recordable disc formats (including CD-R

ﬁles). Not all recordable discs will operate or produce

optimal playback quality. The technical criteria set

forth in this owner's manual are meant only as a

guide.

You must obtain any required permission from

content. Toshiba cannot and does not grant such

permission.

Basic playback control

Unless otherwise stated, all operations described are

based on Remote Control use.

Pausing playback

During playback, press PLAY/PAUSE

playback and display a still picture.

to pause

Supported Formats

Sound will be muted.

To resume normal playback, press PLAY/PAUSE

again.

JPEG/Pictures

-The ﬁle extensions has to be '.JPG ' and not

'.JPEG' .

-JPEG/ISO format.

-Maximum of 5760×3840 resolution can be

supported.

-Maximum ﬁle size: 10M.

Skipping chapter/track

 Press PREV

/ NEXT

to go to the previous

or next chapter/track during playback.

When PREV

is pressed after the ﬁrst 5

-It can only display DCF-standard still pictures or

JPEG pictures such as TIFF.

DivX^®

seconds of playback, playback will start from the

beginning of the current chapter/track. If you press

the button within the ﬁrst 5 seconds, playback will

start from the beginning of the preceding chapter/

track.

-The ﬁle extensions has to be '.AVI ', '.MPG ' or

'.MPEG '.

-DivX^®3.11, 4.x, 5.x and 6.0.

-Q-pel accurate motion compensation.

Global Motion Compensation (GMC) playback.

-Ofﬁcial DivX^®Certiﬁed product.

-Plays all versions of DivX^®video (including DivX^®6)

with standard playback of DivX^®media ﬁles.

 Press DISPLAY to display the disc

information for title/chapter/track.

 Use Number buttons to enter valid chapter / track

number directly. For the track/chapter numbers which

are greater than ＂9＂, use ＂+10＂ button. Each

presses increases the number by 10. Then press the

second digit of track/Chapter number.

Tips:

– Maximum 100 sessions for CD and 10 multi border

for DVD are supported.

– For DVD-R, DVD-RW multi border, only finalized

disc can be supported.

The playback skips to the selected chapter / track.

Helpful hint: Some discs cannot be played on this DVD player due to the conﬁguration and characteristics

of the disc, or due to the condition of recording and authorizing software

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢃ

Playback Feature

control, then press OK to start playback.

To access or remove the menu.

Press MENU on the remote control.

ybac

Stopping playback

During playback, press STOP



The DVD player memorises the stopped point.

Press PLAY/ PAUSE

location where you stopped playback.

If you press STOP

again, the DVD player will

Zooming In

to resume playback from the

This function allows you to enlarge the picture on the

TV screen and to pan through the enlarged picture.



cancel the resume function.

During playback, press ZOOM repeatedly to display

the picture with different scales.

Tips:

-Screen saver will start automatically if the disc

playback is stopped for about 2 minutes.

-The player will automatically switch to Power

Standby mode if you do not press any buttons for

about 22 minutes after the disc has stopped playing.

Use /// to pan through the enlarged picture.

Playback will continue.

Press ZOOM repeatedly to return to the original size.

Slow Motion

Program playback

Press SLOW during playback to select the required

speed: 1/2, 1/4, 1/8( forward only ).

During playback, press PROG, then the OSD will

appear as below:

Sound will be muted.

To return to normal speed, press PLAY/ PAUSE

For VCD:

Program

Forward/ Reverse Searching

Track

You can fast forward or fast reverse a disc during

playback and select a desired search speed.

For DVD,VCD, SVCD,CD

Track

During playback, press F.R/ F.F to select the required

speed: X2, X4, X8, X16(backward or forward).

Sound will be muted (DVD/VCD/SVCD) or

intermittent (CD).

Clear

Play

Clear All

To return to normal speed, press PLAY / PAUSE

For DVD:

Program

Selecting various repeat functions

Repeat play mode

Title

The repeat play options vary depending on the disc

type.

Clear

Play

Clear All

While playing a disc, press REPEAT repeatedly to

choose a repeat options.

Use the / and OK button to select your desired

title/chapter/track in the list.

When you have ﬁnished programming, press  to

move the cursor to the 'Play', then press the OK

For DVD

-Repeat Chapter (currently playing chapter)

-Repeat Title (currently playing title)

-Off (cancel)

button or directly press PLAY/PAUSE

start the program playback.

button to

For Video CD, Audio CD

-Repeat Single (currently playing track)

-Repeat All (entire disc)

-Off (cancel)

Press CLEAR or select ' Clear ' to delete one by one

from last chosen track / title /chapter or select 'Clear

All' to clear all the programmed tracks/titles.

Press STOP twice to cancel program playback.

For JPEG

-Repeat Single (currently playing ﬁle)

-Repeat All (current folder)

-Off (cancel)

Operations for video playback (DVD/

VCD/SVCD)

Tip:

Using the disc menu

-For VCD2.0/SVCD discs, repeat playback is not

possible if the PBC mode is turned on.

Depending on the disc, a menu may appear on the

TV screen once you load in the disc.

To select a playback feature or item

Use /// or number buttons on the remote

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

ꢀꢈ

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback Feature

Repeating a section within a chapter/

track

You can repeat the playback of a speciﬁc segment

within a chapter or track. To do this, you must mark

the start and end of the segment you want.

Angle

 When {Angle} information appears on the screen,

press ANGLE button on the remote control

repeatedly to switch between different angles.

Playback will go to the selected angle.

While playing a disc, press A - B at your chosen

starting point.

Press A - B again at your chosen end point.

Special DVD Features

 The section will now repeat continuously.

Playing a Title

To exit the sequence, press A - B.

Press TITLE.

Viewing the disc playback Information

The disc title menu appears on the TV screen.

Use /// or number buttons (0-9) to select a

play option.

You can view the disc information (such as current

title/chapter/track number, total playing time or

remaining time on the disc) without interrupting the

disc playback.

Press OK to conﬁrm.

Changing the Audio Language

For DVD：

During playback, press DISPLAY repeatedly on the

remote control.

Press AUDIO repeatedly to select different audio

languages.

The available disc information appears on the TV

Changing the Audio Channel

For VCD：

Press AUDIO to select the available audio channels

screen with the following sequence.

Time

(DVD)

Time

00：03：33/01：24：46

provided by the disc (Left, Right, Mix, Stereo).

Title

Subtitles

Title 1/1

Chapter

Chapter 2/8

Audio

Press SUBTITLE repeatedly to select different

subtitle languages.

Audio 1/1

D6Ch Eng

(DVD)

(VCD)

Subtitle

Special VCD and SVCD Features

1/8 Eng

Angle

Angle 1/4

For VCD with Playback Control ( PBC ) feature

(version 2.0 only)

Time

00：03：33/00：05：00

Press MENU to toggle between ' PBC On ' and '

Track

Time

PBC Off '.

3/24

(VCD PBC OFF)

If you select ' PBC On ', the disc menu ( if

available ) will appear on the TV.

Use the number buttons ( 0-9 ) to select a play

option.

(VCD PBC ON)

00：03：33/00：05：00

PBC On

Press PREV

or next track.

When PREV

/ NEXT

to go to the previous

Title/Chapter/Track/Time selection

is pressed after the ﬁrst 5

seconds of playback, playback will start from the

beginning of the current track. If you press the button

within the ﬁrst 5 seconds, playback will start from the

beginning of the preceding track.

Press T-SEARCH, then press / to select

{ Time }, { Title }, { Chapter } or { Track }.

For VCD：

PBC OFF

During playback, pressing RETURN will return to

the menu screen (if PBC is on).

If you want to skip the index menu and playback

directly from the beginning.

Track

---

Time

--:--:--

(desired time of the current track)

(desired time of the disc)

Disc Time

For DVD:

Title

Press MENU on the remote control to turn the PBC

off.

---

Chapter

Time

--:--:--

(desired time of the disc)

Use the number buttons ( 0-9 ) to input a valid

number or time("0"cannot be input as the ﬁrst

number). (This function only apply to DVD/VCD.)

Press OK to conﬁrm.

The playback skips to the selected title/chapter/

track/time.

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢄ

Playback Feature

 Press PREV

/ NEXT

to select the

previous/next ﬁle in the current folder.

Playing a DivX Disc

 Press PLAY/PAUSE

repeatedly to

pause/resume playback.

This DVD player supports the DivX^®movie playback

that you download from your computer onto a CD-

R/RW or DVD+R/RW (see pages 13-14 for more

information).

Play modes for DivX /Audio CD/JPEG

You are able to modify the play modes through the

toolkit which appears on the right of below picture

on the screen. Press  /  to navigate between the

windows and  /  buttons to select ﬁles/ tracks or

play mode items. Then press OK . Please refer to

below steps to playback ﬁles /tracks in the Program

View list:

Load a DivX^®disc.

The data disc menu appears on the TV screen.

Press / to select the folder and press OK to

open the folder.

Press / to select a ﬁle.

Press OK to conﬁrm.

 Press SUBTITLE on the remote control will turn

on or off the subtitle.

Select Edit Mode in the toolkit then press OK to

start edit mode.

Select a ﬁle/track or more ﬁles/tracks you want in the

original view list.

Select Add To Program in the toolkit then press

OK. ' √ ' will disappear from screen. It means that the

ﬁles/tracks you have selected already added into the

Program View list.

Select Program View in the toolkit then press OK to

open the ﬁle/track in the Program View list that you

already selected in step B.

 If multilingual subtitles are embedded on the DivX^®

disc, pressing SUBTITLE will change the subtitle

language during playback.

Tips:

–Subtitle ﬁles with the following ﬁlename extensions

(.srt, .smi, .sub, .ssa, .txt) are supported but do not

appear on the ﬁle navigation menu.

–The subtitle ﬁlename(.sub) has to be saved under

the same ﬁlename as the movie(.avi) in the same

folder.

Press PLAY / PAUSE

to playback all ﬁles/tracks

[For example, Folder A: abc.avi and abc.sub]

in the Program View list.

Playing JPEG/ Kodak picture CD

Filter

IMPORTANT!

You have to turn on your TV and set to

the correct Video In channel. (See page

12, ‘ Finding your viewing channel ‘ ).

The Toolkit has the following play mode items:

 Filter ( Audio/Photo/Video ): Sets ﬁle ﬁlters

(Filter is not applicable to Audio CD.)

General Operation

Load a disc.

 Repeat (Off/Single/ All):

The disc reading time may exceed 30 seconds

due to the complexity of the directory/ﬁle

conﬁguration.

Off:

Resumes normal playback

Single: Repeats the current track/ﬁle.

All:

Repeats all ﬁles on the current folder or all

tracks on the disc.

The data disc menu information appears on the

TV screen.

 Mode(Normal/Shufﬂe)

This mode can also be toggled by using RANDOM

button.

Normal: Resumes Normal playback

Shufﬂe: Playbacks track/ﬁle in random order.

Filter

 Edit Mode: Program operation works only when

Edit Mode is selected. After ﬁnished storing the ﬁles/

tracks you want into the Program View list, select

“Edit Mode” again and press OK to release edit

mode.

Press  /  to select the folder and press OK to

open the folder.

Press  /  to select a ﬁle.

Press OK to conﬁrm.

 Program View: To view tracks/ﬁles in the

Program View list. It is disabled if the Program View

list is empty.

 Add To Program: Add ﬁles/tracks to the Program

View list. It is disabled if Edit Mode is not selected.

(The maximum number of ﬁles/tracks can be added

is 30.)

Tips:

- If you highlight on a jpeg ﬁle, a preview will appear.

- During JPEG playback, the LED will display the ﬁle

number.

 Browser View: To view ﬁles/tracks in the Original

View list.

Playback Selection

 Clear Program: Delete the ﬁles/tracks in the

During playback, you can;

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

ꢀꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Menu Options

Tips:

Program View list.

-Some DVD video discs may be set to display

subtitles in a different language other than

you selected. A prior subtitle language may be

programmed on the disc.

Select a ﬁle/track or more you want to delete in

stop mode.' √ ' will appear besides the deleted ﬁle/

track.Select Clear Program and then press OK . It is

disabled if Edit mode is not selected.

-Some DVD video discs allow you to change subtitle

selections only via the disc menu. If this is the case,

press the MENU button and choose the appropriate

subtitle language from the selection on the disc

menu.

Zoom picture ( JPEG)

 During playback, press ZOOM repeatedly to

display the picture with different scales.

 Use  /  /  /  to view the zoomed picture.

-Some DVD video discs may not be played in a

different audio language that you selected. A prior

language may be programmed on the disc.

-Some DVD discs may not include your pre-selected

language . In this case, the DVD player

automatically displays discs menus consistent with

the disc’s initial language setting.

Rotate picture (JPEG)

 During playback, press  /  /  /  to rotate the

picture on the TV screen.

 / ：ﬂip the picture vertically by 180º

：rotate the picture anti-clockwise by 90º

：rotate the picture clockwise by 90º

Tip:

-It may not be possible to play certain JPEG disc due

to the conﬁguration and characteristics of the disc or

condition of the recording.

DivX Subtitle

If your DivX^®ﬁles include a subtitle ﬁle (see page

17 for the supported ﬁle formats), you may select a

supported DivX^®subtitle language by region.

This DVD Player setup is carried out via the TV,

enabling you to customise the DVD player to suit

your particular requirement.

In ‘Language’, press / to select

{ DivX Subtitle }, then press .

{

}

Standard

Albanian, Danish, Dutch, English, Finnish, French, Gaelic,

German, Italian, Kurdish (Latin), Norwegian, Portuguese,

Using the Language setup menu

Spanish, Swedish andTurkish.

{

}

Central European

Albanian, Croat, Czech, Dutch, English,

German, Hungarian, Irish, Polish,

Press SETUP on the remote control.

 The system setup menu appears.

Romanian, Slovak, Slovene and Sorbian.

OSD language

Subtitle

:English

:Auto

Language

{

}

Cyrillic

Video

DivX Subtitle

Audio

:Standard

Bulgarian, Belorussian, English,

Macedonian, Moldavian, Russian,

English

Audio

DVD Menu

Serbian and Ukrainian.

{ Greek }

English and Modern Greek only.

{ Hebrew }

Rating

Misc

English and Modern Hebrew only.

Press  /  to select {Language }, then press .

Press  /  to select an item, then press  to

access.

Use / to select a setting and press

to conﬁrm.

Example: { OSD Language }

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use / to select a setting and press OK to

conﬁrm.

Using the Video setup menu

Press SETUP on the remote control.

The system setup menu appears.

Example: { English }

Language

4:3

Aspect Ratio

View Mode

TV System

Video Out

: 4:3

The setting is selected and setup is completed.

To exit, press SETUP.

:Auto Fit

:PAL

Video

Audio

:RGB

Smart Picture

:Standard

OSD Language

This menu contains various language options for the

language displayed on the screen.

Rating

Misc

Subtitle/Audio/DVD Menu/DivX Subtitle

Press  /  to select { Video }, then press 

Press  /  to select an item, then press  to

access.

These menus contains various language options for

audio, subtitle, DVD menu and DivX subtitle which

may be recorded on the DVD.

Example: { Video Out }

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢆ

DVD Menu Options

A playback picture may be distorted when detected a

signal change between PAL and NTSC on the disc.

For the case of Progressive mode, your multisystem

TV must be able to support 525p and 625p.

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use  /  to select a setting and press OK to

conﬁrm.

Example: { P-Scan }

Video Out

The video output of the DVD player can be selected

as “Component”, “RGB” or “P-Scan”.

In ' Video ', press  /  to select { Video Out },

then press .

The setting is selected and setup is completed.

To exit, press SETUP.

{ Component }

Aspect Ratio

Select this for component video connection.

{ RGB }

Select this for Scart connection.

{ P-Scan }

Select this when you connect your DVD player to

your TV, which has component video inputs that

supports progressive scan.

Use  /  to select a setting and press OK to con-

ﬁrm.

The picture shape can be adjusted to ﬁt your TV and

the format must be available on the playback disc.

Otherwise, the TV display will not affect the picture

during playback.

In ' Video ', press  /  to select {Aspect Ratio },

then press .

{ 4:3 }

Select this if you have a normal TV. A 'wide-screen'

source display with black bars on the top and bottom

Smart Picture

will be displayed on the TV screen.

{ 16:9 }

This DVD player provides four predeﬁned sets of

picture color settings.

In ' Video ', press  /  to select {Smart Picture },

then press .

Select this for wide-screen TV (frame ratio 16:9).

Use  /  to select a setting and press OK to

conﬁrm.

{ Standard }

View Mode

Use view mode to scale an image that ﬁts to the TV

screen's width and height.

In ' Video ', press  /  to select { View Mode },

then press .

{ Fill }

Select this for a preset standard picture setting.

{ Vivid }

Select this to make the picture brighter.

{ Cool }

Select this to make the picture softer.

{ Personal }

Select this to personalize your picture color by

adjusting the brightness, contrast, tint and color

Fill the screen with decoded image.

{ Original }

Display image as its original size.

(saturation).

Use  /  to select a setting and press OK to

conﬁrm.

If you select { Personal }, then proceed to steps

D~G.

{ Height Fit }

Fit the screen height with image height.

{ Width Fit }

Fit the screen width with image width.

{ Auto Fit }

Automatically display the decoded image on screen

The setup menu appears.

at a suitable size.

Brightness

{ Pan Scan }

Automatically display decoded image on full screen

Contrast

Tint

Color

without distortion.

Use  /  to select a setting and press OK to

conﬁrm.

Tip:

Press  /  to highlight one of the following options.

Brightness

-Depending on the type of disc, you may not be able

to view the mode as selected.

Increase the value to brighten the picture or vice

versa. Choose zero (0) for average setting.

Contrast

Increase the value to sharpen the picture or vice

versa. Choose zero (0) to balance the contrast.

Tint

Increase the value to darken the picture or vice

versa. Choose zero (0) for average setting.

Color

Increase the value to enhance the colour in your

picture or vice versa. Choose zero (0) to balance the

colour.

TV System

The video standard of the DVD player output can be

selected from “NTSC”, “PAL” or “Multi”.

{ NTSC }: Select if your TV system is NTSC.

{ PAL }: Select if your TV system is PAL.

{ Multi }: The DVD video player automatically

identiﬁes PAL or NTSC video system of a disc.

Connect a multisystem TV (PAL/NTSC compatible) to

view a picture.

Press  /  to adjust the setting that best suits

your personal preference.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢀꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Menu Options

In ＇ Audio＇, press  /  to select { Night Mode },

then press .

{ On }

Select this to set low volume output. This feature

is only available for movie discs with Dolby Digital

Repeat steps D~ E to adjust your picture

preference.

Press  /  to select ＇Close＇ and press OK to

conﬁrm.

mode.

{ Off }

Using the Audio setup menu

Turns off night mode feature. Select this to enjoy the

Press SETUP on the remote control.

surround sound with its full dynamic range.

Use  /  to select a setting and press OK to

conﬁrm.

The system setup menu appears.

Digital Output

: All

:Off

: On

:Off

Language

Night Mode

Down Sampling

You can enable and disable the digital signal for

better sound output quality.

In ＇Audio＇, press  /  to select { Down

Sampling }, then press .

{ Off }

Video

3D Effects

Audio

Rating

Misc

If your ampliﬁer / decoder is compatible with 96 KHz

PCM, select “ Off “ . Sound is sampled at 96 KHz.

{ On }

If your ampliﬁer / decoder is not compatible with 96

KHz PCM, select “ On “ . Sound recorded at 96 KHz

is down sampled to 48 KHz.

Press  /  to select { Audio }, then press .

Press  /  to select an item, then press  to

access.

Example: { Night Mode }

The options for the selected item appears.

Use  /  to select a setting and press OK to

conﬁrm.

Tip:

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

- When playing back disc with copyright protection,

the sound will be down sampled to 48 KHz even

when you select Down Sampling off.

Use  /  to select a setting and press OK to

conﬁrm.

Example: { On }

The setting is selected and setup is completed.

To exit, press SETUP.

3D Effects

To obtain expansive virtual surround sound effects

from two speakers, set 3D Effects to on. This

enhancement sounds only output from the Analogue

AUDIO OUT (L / R) jacks of the DVD player.

In 'Audio', press  /  to select { 3D Effects }, then

press .You can set to { Off } or { On }.

Use  /  to select a setting and press OK to

conﬁrm.

Digital Output

Select this if you connect to a multichannel decoder/

receiver.

In 'Audio', press  /  to select { Digital Output },

then press .

{ All }

Select this if the connected device has a built-in

multichannel decoder that supports one of the

multichannel audio format (Dolby Digital, DTS).

{ PCM }

Tip:

- Only effective in playback of a DVD Video disc with

Dolby Digital 5.1 bitstream.

Select this if the connected device is not capable of

decoding multichannel audio. The DVD player will

convert the Dolby Digital signal to PCM (Pulse Code

Modulation).

Using the Rating setup menu

Press SETUP on the remote control.

{ Off }

The system setup menu appears.

To deactivate the digital audio output. For example, if

you use the AUDIO OUT jacks to connect to a TV or

stereo system.

Parental control

: 8.Aduit

Language

Video

Set Password

Use  /  to select a setting and press OK to

conﬁrm.

Audio

Rating

Tip:

Misc

-When playing MPEG and set Digital Output to {All},

the player will output PCM signals.

Press  /  to select {Rating }, then press .

Press  /  to select an item, then press  to

access.

Night Mode

This mode optimizes playback of sound at low

volume. High volume outputs will be softened and

low volume outputs are brought upward to an audible

level.

Example: { Parental control }

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁ0

DVD Menu Options

then press OK.

change at the current state.

You will be prompted to enter your four-digit

password.

Use  /  to select a setting and press OK to

conﬁrm.

Example: { 8 Adult }

Enter Password

The setting is selected and setup is completed.

To exit, press SETUP.

Use the number buttons ( 0-9 ) to enter the four-digit

password.

Rating Level settings

When doing this for the ﬁrst time, enter the default

password ＇0000 ＇.

 If you forget your old four-digit password, enter the

default password ＇ 0000＇.

Press OK again to enter the new four-digit password.

Depending on the DVD, you may be asked to

change the parental level while playing the disc. The

rating levels are from 1 to 8 and are country

dependent. You can prohibit the playing of certain

discs that are not suitable for your children, or have

certain discs played with alternative scenes.

In ' Rating ', press  /  to select {Parental control },

then press .

The new four-digit password will now take effect.

Enter New Password

Use the number buttons to enter the four-digit

password, then press OK.(See ‘Changing the

Password’ on this page.)

Press OK to conﬁrm.

Press OK again to list the parental level.

{ 1.Kid Safe }

Suitable for children.

{ 2. G }

Using the Misc (Miscellaneous) setup

General Audience; recommended as acceptable for

viewers of all ages.

{ 3. PG }

Parental Guidance suggested.

Press SETUP on the remote control.

 The system setup menu appears.

{ 4. PG-13 }

Use Default Settings

Language

Unsuitable for children under 13.

{ 5. PG-R }

DivX Registration

Video

Parental Guidance Recommended.

Audio

Rating

{ 6. R }

Restricted; under 17 requires accompanying parent

or adult guardian.

Misc

{ 7. NC-17 }

No one under 17 admitted.

{ 8. Adult }

DVD softwares of any grades (adult/general/children)

can be played back. Should be viewed only by adults

due to graphic sexual material, violence or language.

Use  /  to select a rating level and press OK to

conﬁrm.

Press  /  to select { Misc }, then press .

Press  /  to select an item, then press OK to

access.

Example: { Use Default Settings }

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use /  to select a setting and press OK to

conﬁrm.

Select { 8 Adult } to disable parental level and

allow all discs to play.

DVDs that are rated higher than the level you

selected will not play unless you enter your four-digit

password.

Example: { No }

The setting is selected and setup is completed.

To exit, press SETUP.

Tips:

Restoring to original settings

-This feature will not limit viewing if the disc

manufacturer did not code the disc.

-VCD, SVCD, CD have no level indication, so

parental control has no effect on these type of discs.

This also applies to most illegal DVDs.

-Some DVDs are not coded with a rating though the

movie rating may be printed on the disc cover. The

rating level feature does not prohibit play of such

discs.

Setting the { Use Default Settings } function will reset

all options and your personal settings to the factory

defaults, except your password and rating level.

In ＇ Misc＇, press  /  to select

{ Use Default Settings }, then press OK.

The menu will appear.

Use Default Settings

Changing the Password

Yes

You need to enter your four-digit password to play a

prohibited disc or if prompted for a password.

In ＂Rating＂, press  /  to select {Set Password },

{ Yes }

Select this to reset to factory default settings.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢁꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Menu Options

{ No }

Select this to close the menu.

Use  /  to select a setting and press OK to

conﬁrm.

Tray Lock

DivX^®Registration

Press SETUP button, then press the number button

"2006" in sequence to lock the tray.

DivX registration code allows you to rent and

 All functionality of the player and playback remain

the same except for the OPEN/CLOSE button.

 After the tray is locked, "Tray Lock Is On" will

appear on the screen when OPEN/CLOSE is

pressed.

purchase movies using the DivX VOD service from

the internet.

For more information, visit website:

www.divx.com/vod.

 To unlock the tray, just follow the same procedure

as above.

In ‘Misc’, press / to select

{ DivX Registration }, then press OK.

The registration code will appear.

Use the registration code to rent or purchase the

movies from DivX VOD.

Registration service at www.divx.com/vod.

Follow the instructions and download the movie

from your computer onto a CD-R/RW for playback on

this DVD player.

Tips:

–

All the downloaded movies from DivX Registration

can only be played back on this DVD player.

Time search feature is not available during DivX

movie playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁꢁ

Speciﬁcations

DVD Player/Outputs/Supplied Accessories

DVD Player

Power supply

110 V - 240 V AC, 50/60 Hz

Power Consumption

12W( standby :<3W)

Net weight

1.35 kg

External dismensions

Signal System

Laser

360 X 43 X 209 mm (W/H/D)

PAL, NTSC

Semiconductor laser, wavelength 650/780 nm

Frequency range

DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz

96 kHz sampling 4 Hz to 44 kHz

Signal-to-noise ratio

Audio dynamic range

Harmonic distortion

Wow and ﬂutter

More than 90 dB

More than 80 dB

Less than -65 dB

Below measurable level [(less than ＋ 0.001 % ( W.PEAK )]

Operating conditions

Temperature : 5 C to 35 C Operation status :Horizontal

Outputs

Video output

1.0 V ( p-p ) , 75 Ω negative sync., pin jack x 1

Video output (SCART)

Component video output

1.0 V ( p-p ) , 75 Ω, SCART socket x 1

(Y) 1.0 (p-p), 75 Ω negative sync., pin jack x 1

(P B)/(P R) 700 mV (p-p), 75 Ω, pin jack x 2

Audio output (SCART)

2.0 (rms), 680 Ω, SCART socket x 1

Audio output ( COAXIAL DIGITAL ) 0.5 V (p-p) 75 Ω pin jack x 1

Audio output (ANALOG)

2.0 V (rms), 680 Ω, pin jacks (L/R) x 1

Supplied Accessories

Remote control(SE-R0301)

Batteries(AAA)

The model complies with the above speciﬁcations.

Designs and speciﬁcations are subject to change without notice.

This model may not be compatible with features and /or speciﬁcations that may be added in the future.

ꢁꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

WARNING

Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the

warranty. Do not open the DVD player as there is a risk of electric shock.

If a fault occurs, ﬁrst check the points listed below before taking the DVD player for repair. If you are unable

to remedy a problem by following these guides, consult your dealer or TOSHIBA for help.

Problem

No power

Solution

-Check if theAC power cord is properly connected.

-Press the I/2ON/STANDBY on the front of the DVD player

to turn on the power.

-Refer to your TV' s manual for correct Video In channel

selection. Change the TV channel until you see the DVD

screen.

No picture

-Check if the TV is switched on.

-If the progressive scan feature is activated but the connected

TV does not support progressive signals or the cables are

not connected accordingly. See pages 12-13 for proper

progressive scan set up or deactivate the progressive scan

feature as follow:

1) Press OPEN/CLOSE on the DVD Player.

2) When the disc tray is opened, press number button＇1＇on

the remote control for a few seconds.

Distorted picture

Picture clipped

-Sometimes a small amount of picture distortion may

appear depending on the disc being played back. This is not

malfunction.

-May be caused by View Mode Setting (see page 19). Set to

Original for normal viewing.

-Connect DVD Player directly to the TV.

Completely distorted picture or

black /white picture with DVD.

-Make sure the disc is compatible with the DVD player.

-Ensure that the DVD Player's setting is set to match that of

the disc and your TV.

-Adjust the volume.

-Check that the speakers are connected correctly.

No sound / distorted sound

No audio at digital output

-Check the digital connections.

-Check if your receiver can decode MPEG-2 or DTS and if not,

please make sure the digital output is set to PCM.

-Check if the audio format of the selected audio language

matches your receiver capabilities.

-Check that the cable is connected to the correct device (See

Connecting to television).

No sound and picture

Disc cannot be played

-The DVD⁺R/RW must be ﬁnalized.

-Ensure the disc label is facing up.

-Check if the disc is defective by trying another disc.

-Wrong region code.

-Check the disc for ﬁngerprint/scratches and clean with a soft

cloth wiping from centre to edge.

Picture freezes momentarily during playback

No return to start-up screen when disc is removed

-Reset the unit by switching the player off, then on again.

-Aim the Remote Control directly at the sensor on the front of

the player.

The player does not respond to the Remote Control

-Reduce the distance to the player.

-Replace the batteries in Remote Control.

-Re-insert the batteries with their polarities(+/- signs)as

indicated.

Buttons do not work

-To completely reset the player, unplug theAC cord fromAC

outlet for 5-10 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁꢃ

Troubleshooting

Problem

Solution

Player does not respond to some operating

commands during playback.

-Operations may not be permitted by the disc.

Refer to the instructions of the disc jacket.

DVD Player cannot read CDs /DVDs

Menu items cannot be selected

-Use a commonly available cleaning CD/DVD to clean

the lens before sending the DVD Player for repair.

-Press STOP twice before selecting system setup

menu.

-Depending on the disc availability,some menu items

cannot be selected.

Unable to select Progressive Scan on/off

-Ensure that the output of the Video Out signal is

switch to P-Scan/Component.

ꢁꢈ

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

Analogue audio:

Progressive scan:

DivX :

An electrical signal that directly

represents sound. In contrast,

digital audio can also be an electrical

signal, but is an indirect

representation of sound. See also

Digital audio.

It displays all the horizontal lines

of a picture at one time, as a signal

frame. This system can convert

the interlaced video from DVD into

progressive format for connection to

a progressive display. It dramatically

increases the vertical resolution.

DivX^®is a codec (compression/de-

compression) that can compress im-

ages to a very small amount of data.

Dolby Digital:

A system developed by Dolby

Laboratories that compresses

digital sound. It works with stereo

(2ch) or multi-channel audio.

Aspect ratio:

PCM:

The width of a TV screen relative to

it is height. Conventional TVs are 4:3

(i.e., the screen is almost square).

Widescreen models are 16:9 (the

screen is almost twice as wide as its

height)

(Pulse Code Modulation)

PCM is a format that converts audio

into digital data. It is mainly used for

Audio CDs and DAT. This unit can

play back sounds as realistic as

DTS :

(Digital Theater System)

DTS is a Multi-channel surround

sound system, but it is different from

Dolby Digital. Both formats were

developed by Digital Theater

Systems, Inc.

possible by converting even com-

pressed Dolby Digital and MPEG

audio to PCM.

Chapter:

Just as a book is split up into

several chapters, a title on a DVD

disc is usually divided into chapters.