User’s Manual
P200 Series
computers.toshiba-europe.com
Download from Www.Somanuals.com. All Manuals Search And Download.
P200 Series
Manufactured under license from Dolby Laboratories. "Dolby" and the
double-D symbol are trademarks of Dolby Laboratories. Confidential
unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
Manufactured under license from Digital Theater Systems, Inc. U.S. Pat.
No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535
and other U.S. and world-wide patents issued and pending. "DTS" and
"DTS Digital Surround" are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights
Reserved.
Bluetooth is a registered trademark owned by its proprietor and used by
TOSHIBA under license.
iLINK is a trademark of Sony Corporation.
Other trademarks and registered trademarks not listed above may be used
in this manual.
Macrovision License of Notice
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
Safety Instructions
Use the following safety guidelines to help protect yourself and your
computer.
When Using Your Computer
Do not operate your portable computer for an extended period of time with
the base resting directly on your body. With extended operation, heat can
potentially build up in the base. Allowing sustained contact with the skin
could cause discomfort or, eventually, a burn.
■ Do not attempt to service the computer yourself. Always follow
installation instructions closely.
■ Do not carry a battery in your pocket, purse, or other container where
metal objects (such as car keys) could short-circuit the battery
terminals. The resulting excessive current follow can cause extremely
high temperatures and may result in damage from burns.
■ Be sure that nothing rests on your AC adapter's power cable and that
the cable is not located where it can be tripped over or stepped on.
■ Place the AC adapter in a ventilated area, such as a desk top or on the
floor, when you use it to run the computer or to charge the battery. Do
not cover the AC adapter with papers or other items that will reduce
cooling; also, do not use the AC adapter while it is inside a carrying
case.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
P200 Series
■ Use only the AC adapter and batteries that are approved for use with
this computer. Use of another type of battery or AC adapter may risk fire
or explosion.
■ Before you connect the computer to a power source, ensure that the
voltage rating of the AC adapter matches that of the available power
source.
115V/60 Hz in most of North and South America and some Far Eastern
countries such as Taiwan.
100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan.
230 V/50 Hz in most of Europe, the Middle East, and the Far East.
■ If you use an extension cable with your AC adapter, ensure that the total
ampere rating of the products that are plugged into it do not exceed the
ampere rating of the extension cable itself.
■ To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm.
■ When setting up the computer for work, place it on a level surface.
■ Do not dispose of batteries in a fire. They may explode. Check with
local authorities for disposal instructions.
■ When travelling, do not check the computer as baggage. You can put
your computer through an X-ray security machine, but never put your
computer through a metal detector. If you have the computer checked
by hand, be sure to have a charged battery available in case you are
asked to turn on the computer.
■ When travelling with the hard drive removed from the computer, wrap
the drive in a non-conducting material, such as cloth or paper. If you
have the drive checked by hand, be ready to install the drive in the
computer. Your can put the hard drive through an X-ray security
machine, but never put it through a metal detector.
■ When travelling, do not place the computer in overhead storage
compartments where it could slide around. Do not drop your computer
or subject it to other mechanical shocks.
■ Protect your computer, battery, and hard drive from environmental
hazards such as dirt, dust, food, liquids, temperature extremes, and
overexposure to sunlight.
■ When you move your computer between environments with very
different temperature and/or humidity ranges, condensation may form
on or within the computer. To avoid damaging the computer, allow
sufficient time for the moisture to evaporate before using the computer.
■ When you disconnect a cable, pull on its connector or on its strain relief
loop, not on the cable itself. As you pull out the connector, keep it
evenly aligned to avoid bending any connector pins. Also, before you
connect a cable make sure both connectors are correctly oriented and
aligned.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
P200 Series
■ Before you clean your computer, turn if off, unplug it from its power
source, and remove the battery.
■ Handle components with care. Hold a component such as a memory
module by its edges, not its pins.
When using telephone equipment in conjunction with your computer, basic
safety precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
■ Do not use this product near water, for example, near a bathtub,
washing bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
■ Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
■ Do not use the telephone to report a gas leak in the vicinity of the leak.
■ Use only the power cord indicated in this manual.
■ Replace only with the same or equivalent type battery recommended by
the manufacturer.
■ Dispose of used batteries according to the manufacturer's instructions.
■ To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
Use only the battery pack that came with the computer or an optional
battery pack. Use of the wrong battery could damage your computer.
TOSHIBA assumes no liability for any damage in such case.
EU Declaration of Conformity
This product is carrying the CE-Mark in accordance with the related
European Directives. The party responsible for CE-Marking is TOSHIBA
Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
The complete and official EU Declaration of Conformity can be found on
GOST
User’s Manual
v
Download from Www.Somanuals.com. All Manuals Search And Download.
P200 Series
Following information is only for EU-member states:
The symbol indicates that this product may not be treated as
household waste. Please ensure this product is properly
disposed as inappropriate waste handling of this product may
cause potential hazards to the environment and human health.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
This symbol may not stick depending on the country and region where you
purchased.
Optical Disc Drive Safety Instruction
■ Be sure to check the international precautions at the end of this
section.
The optical drive that is used in this computer is equipped with a laser
device. A classification label with the following sentence is affixed to the
surface of the drive.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE 1
KLASS 1 LASER APPARAT
The drive with the above label is certified by the manufacturer that the drive
complies with the requirement for laser product on the date of
manufacturing pursuant to article 21 of Code of Federal Regulations by the
United States of America, Department of Health & Human Services, Food
and Drug Administration.
In other countries, the drive is certified to comply with the requirement
pursant to IEC 825 and EN60825 on class 1 laser product.
This computer is equipped with one of the optical drive in the following list
according to the model.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
P200 Series
Pioneer
DVD Super Multi DVR-K17
■ The DVD Super Multi drive employs a laser system. To ensure proper
use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
PIONEER CORPORATION
4-1, MEGURO 1-CHOME
MEGURO-KU, TOKYO, 153-8654
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
P200 Series
TOSHIBA Samsung Storage Technology
TS-L632D
■ The drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for
future reference. Should the unit ever require maintenance, contact an
authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
TOSHIBA Samsung Storage Technology
Korea Corporation
416, Maetan-3Dong, Yeongtong-Gu, Suwon City,
Gyeonggi-Do, 443-742, Korea
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
P200 Series
Hitachi-LG Data Storage
DVD Super Multi GSA-T20N
■ The DVD Super Multi drive employs a laser system. To ensure proper
use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
Hitachi-LG Data Storage, Inc.
22-23, Kaigan 3-chome, Minato-ku,
Yokyo, 108-0022 Japan
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
P200 Series
Panasonic
DVD Super Multi UJ-850U
■ The DVD Super Multi drive employs a laser system. To ensure proper
use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
Panasonic Communications Co., Ltd.
1-62, 4-Chome Minoshima, Hakata-Ku
Fukuoka, Japan
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
x
P200 Series
TEAC
DV-W28EC
■ The drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for
future reference. Should the unit ever require maintenance, contact an
authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
TEAC CORPORATION
3-7-3 NAKA-CHO, MUSASHINO-SHI
TOKYO, JAPAN
User’s Manual
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
P200 Series
TOSHIBA
HD DVD-ROM TS-L802A
■ The HD DVD-ROM drive employs a laser system. To ensure proper
use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.
■ Use of controls, adjustments or the performance of procedures other
than those specified may result in hazardous radiation exposure.
■ To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Location of the required label
SERIAL NO.
MANUFACTURED:
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
TOSHIBA CORPORATION 1-1-1,
SHIBAURA, MINATO-KU,
TOKYO 105-8001, JAPAN
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
P200 Series
International Precautions
CAUTION: This appliance contains a laser
system and is classified as a "CLASS 1 LASER
PRODUCT." To use this model properly, read the
instruction manual carefully and keep this manual
for your future reference. In case of any trouble
with this model, please contact your nearest
"AUTHORIZED service station." To prevent direct
exposure to the laser beam, do not try to open the
enclosure.
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED IN THE OWNER'S MANUAL MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
Modem warning notice
Conformity Statement
The equipment has been approved to [Commission Decision "CTR21"] for
pan- European single terminal connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in the
first instance.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
P200 Series
Network Compatibility Statement
This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to confirm with the additional
requirements conditional in EG 201 121.
Germany
ATAAB AN005, AN006, AN007, AN009, AN010
and DE03, 04, 05, 08, 09, 12, 14, 17
Greece
ATAAB AN005, AN006 and GR01, 02, 03, 04
Portugal
ATAAB AN001, 005, 006, 007, 011 and P03, 04,
08, 10
Spain
ATAAB AN005, 007, 012, and ES01
ATAAB AN002
Switzerland
Norway
ATAAB AN002, 005, 007 and NO 01, 02
ATAAB AN003, 004
All other countries/
regions
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.
Important Notice
Copyrighted works including, but not limited to music, video, computer
program, databases are protected by copyright laws. Unless specifically
permitted under applicable copyright laws, you cannot copy, modify, assign,
transmit or otherwise dispose of any copyrighted work with the consent of
the owner of the copyright.
Please take notice that unauthorized copying, modification, assignment,
transmission and disposition may be subject to claims for damages and
penalties.
General Precautions
TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.
Be certain to read the general precautions below and to note the cautions
included in the text of the manual.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
P200 Series
Creating a computer-friendly environment
Place the computer on a flat surface that is large enough for the computer
and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to provide
adequate ventilation. Otherwise, they may overheat.
To keep your computer in prime operating condition, protect your work area
from:
■ Dust, moisture, and direct sunlight.
■ Equipment that generates a strong electromagnetic field, such as
stereo speakers (other than speakers that are connected to the
computer) or speakerphones.
■ Rapid changes in temperature or humidity and sources of temperature
change such as air conditioner vents or heaters.
■ Extreme heat, cold, or humidity.
■ Liquids and corrosive chemicals.
Stress injury
Carefully read the Instruction Manual for Safety and Comfort. It contains
information on the prevention of stress injuries to your hands and wrists
that can be caused by extensive keyboard use. Chapter 3, Getting Started,
also includes information on work space design, posture and lighting that
can help reduce physical stress.
Heat injury
■ Avoid prolonged physical contact with the computer. If the computer is
used for long periods, its surface can become very warm. While the
temperature will not feel hot to the touch, if you maintain physical
contact with the computer for a long time, for example if you rest the
computer on your lap or if you keep your hands on the palm rest, your
skin might suffer a low-heat injury.
■ If the computer has been used for a long time, avoid direct contact with
the metal plate supporting the various interface ports as this can
become hot.
■ The surface of the AC adaptor can become hot when in use but this
condition does not indicate a malfunction. If you need to transport the
AC adaptor, you should disconnect it and let it cool before moving it.
■ Do not lay the AC adaptor on a material that is sensitive to heat as the
material could become damaged.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to any form of
strong impact as this can damage the computer's components or otherwise
cause it to malfunction.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
P200 Series
PC Card overheating
Some PC Cards can become hot during prolonged use which may result in
errors or instability in the operation of the device in question. In addition,
you should also be careful when you remove a PC Card that has been
used for a long time.
Mobile phones
Please be aware that the use of mobile phones can interfere with the audio
system. The operation of the computer will not be impaired in any way, but
it is recommended that a minimum distance of 30 cm is maintained
between the computer and a mobile phone that is in use.
Instruction Manual for Safety and Comfort
All important information on the safe and proper use of this computer is
described in the enclosed Instruction Manual for Safety and Comfort. Be
sure to read it before using the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xvi
P200 Series
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
Chapter 2 The Grand Tour
Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Left side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Back side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Keyboard Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Optical Disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Chapter 3 Getting Started
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Opening the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Turning off the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Restarting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
System Recovery Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Restoring the pre-installed software from the Product
Recovery disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
Chapter 4 Operating Basics
Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
TV-Out & HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
Cleaning the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Chapter 5 About the HD DVD
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
HD DVD-R Disc writing Software (depending on
Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
(depending on the model you purchased). . . . . . . . . . . . . . . . . . . . 5-18
When Using Ulead DVD MovieFactory® for TOSHIBA . . . . . . . . . . 5-22
Chapter 6 The Keyboard
Typewriter keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
F1 … F12 function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Soft keys: Fn key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Windows special keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Number Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Generating ASCII characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Power indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Battery types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Replacing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
TOSHIBA Password Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Power-up modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Panel power off/on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
System automatic Sleep/Hibernation . . . . . . . . . . . . . . . . . . . . . . . . 7-14
Chapter 8 HW Setup
Chapter 9 Optional Devices
Express Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9
Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Using the Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16
Installing/Removing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18
i.LINK (IEEE1394a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21
Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22
Chapter 10 Troubleshooting
Problem solving process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-17
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xix
Chapter 11 Disclaimers
CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2
LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
LCD Brightness and Eye Strain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
Appendix A Specifications
Appendix B Display Modes
Appendix C AC Power Cord and Connectors
Appendix D If your computer is stolen
Glossary
User’s Manual
xx
Download from Www.Somanuals.com. All Manuals Search And Download.
P200 Series
Preface
Congratulations on your purchase of the P200 Series computer. This
powerful notebook computer provides excellent expansion capability,
including multimedia devices, and it is designed to provide years of reliable,
high-performance computing.
computer. It also provides detailed information on configuring your
computer, basic operations and care, using optional devices and
troubleshooting.
If you are a new user of computers or if you're new to portable computing,
first read over the P200 Series Features and The Grand Tour chapters to
familiarize yourself with the computer's features, components and
on setting up your computer.
preface to learn how this manual is organized, then become acquainted
Special features section of the P200 Series Features, to learn about
features that are unique to the computer.
Manual contents
This manual has eleven chapters, four appendixes and a glossary.
Chapter 1, P200 Series Features, is an overview of the computer's special
features, utilities, and options.
Chapter 2, The Grand Tour, identifies the components of the computer and
briefly explains how they function.
Chapter 3, Getting Started, provides a quick overview of how to begin
operating your computer and gives tips on safety and designing your work
area. Be sure to read the sections on setting up the operating system and
on restoring the pre-installed software.
Chapter 4, Operating Basics, includes instructions on using the following
devices: TouchPad/Dual Mode Pad, the optical disc drives, the internal
modem, LAN and wireless LAN. It also provides tips on care of the
computer, disks and DVD/CD-ROMs.
Chapter 5, About the HD DVD, describes the features, use of HD DVD and
HD DVD Media.
Chapter 6, The Keyboard, describes special keyboard functions including
hotkeys.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxi
P200 Series
Chapter 7, Power and Power-Up Modes, gives details on the computer's
power resources.
Chapter 8, HW Setup, introduces you to the TOSHIBA Hardware Setup
program.
Chapter 9, Optional Devices, describes the optional hardware available.
Chapter 10, Troubleshooting, provides helpful information on how to
perform some diagnostic tests, and suggests courses of action if the
computer doesn't seem to be working properly.
Chapter 11, Disclaimers, provides disclaimer information related to your
computer.
The Appendices provide technical information about your computer.
acronyms used in the text.
Conventions
This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.
Abbreviations
On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.
Icons
Keys
Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing information
on.
The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, Enter identifies the Enter key.
Key operation
Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, Ctrl + C means you must hold down Ctrl and at the same
time press C. If three keys are used, hold down the first two and at the
same time press the third.
DISKCOPY A: B:
When procedures require an action such as
clicking an icon or entering text, the icon's name
or the text you are to type in is represented in the
type face you see to the left.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxii
P200 Series
Display
Names of windows or icons or text generated by
the computer that appears on its display screen is
presented in the type face you see to the left.
ABC
Messages
Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.
Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.
Please read. A note is a hint or advice that helps you make best use of
your equipment.
Terminology
This term is defined in this document as follows:
Start
The word "Start" refers to the
Microsoft Windows Vista™.
button in
®
Equipment checklist
Carefully unpack your computer. Save the box and packing materials for
future use. Check to make sure you have all the following items:
Hardware
■ P200 Series Portable Personal Computer
■ Universal AC Adapter and Power Cord
■ USB Floppy Disk Drive (provided with some models)
■ Modular cable for modem (provided with some models)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiii
P200 Series
Software
®
Microsoft Windows Vista™ Home Basic/Home Premium/Business Edition/
Ultimate Edition
■ The following software which is pre-installed on your hard disk:
®
■ Microsoft Windows Vista™ Home Basic/Home Premium/Business
Edition/Ultimate Edition
■ DVD Video Player
■ TOSHIBA Disc Creator
■ TOSHIBA ConfigFree
■ TOSHIBA Assist
■ TOSHIBA SD Memory Card Format*
■ TOSHIBA HW Setup
■ TOSHIBA Value Added Package Utility
■ TOSHIBA Supervisor Password Utility
®
■ Ulead DVD MovieFactory
■ Online Manual
■ Product Recovery disc (provided with some models)
* The availability of this software is dependent on the model you
purchased.
The system may not function properly if you use drivers that are not pre-
installed or distributed by TOSHIBA.
SD Memory Card Format Utility and other SD functions are packaged into
TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click
Start ꢀControl Panel ꢀPrograms, and select TOSHIBA SD Memory
Utilities.
Documentation
■ Your computer's documentation:
■ P200 Series Personal Computer User's Manual
■ P200 Series Quickstart
®
■ Microsoft Windows Vista™ Quick Start Guide
■ Warranty Information
■ Instruction Manual for Safety and Comfort
If any of the items are missing or damaged, contact your dealer
immediately.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
xxiv
P200 Series Features
Chapter 1
P200 Series Features
This chapter identifies the computer's special features, options and
accessories.
Some of the features described in this manual may not function properly if
you use an operating system that was not pre-installed by TOSHIBA.
Features
Please visit your region's web site for the configuration details of the model
that you have purchased.
Processor
®
Intel Core™ 2 Duo Processor
Disclaimer (CPU)
For more information on the Disclaimer regarding CPU, please refer to the
Disclaimers section in Chapter 11.
Chipset
®
■ Mobile Intel PM965 Express Chipset
■ TEXAS INSTRUMENTS CardReader &
1394a Controller PCI8402
■ Realtek High Definition Audio Codec ALC268
■ Realtek 10M/100M/1Gbps LAN Controller
RTL8111B, 10M/100M LAN Controller
RTL8101E
■ (Depending on the model you purchased)
User’s Manual
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
P200 Series Features
Memory
The graphics system in your computer may use part of the main system
memory for graphics performance and therefore reduce the amount of
system memory available for other computing activities. The amount of
system memory allocated to support graphics may vary depending on the
graphics system, applications utilized, system memory size and other
factors.
Slot
Two DDRII SO-DIMM, up to 4 GB with Mobile
Intel PM965 Express Chipset; can be upgraded
®
through the memory expansion slot.
You need to remove existing SO-DIMM if SO-DIMM
is Maximum upgradable system memory size is
depending on the system you purchased.
L2 Cache
Depending on the model you purchased.
■ 4 MB, 2 MB, or 1 MB L2 Cache
Video RAM
Depending on the model you purchased:
■ ATI Mobility. Radeon™ HD2400, up to
256 MB VRAM (GDDR2)
■ ATI Mobility. Radeon™ HD2600, up to
512 MB VRAM (GDDR2)
BIOS
■ 1 MB Flash ROM for system BIOS
■ Suspend to memory or hard disk drive
■ Various Hotkey functions for system control
■ Complete ACPI 1.0b functionality
Power
Battery Pack
6-cell Lithium Ion smart battery pack with
10.8 V*4000 mAh.
Approximately 12 hours or longer charging time to
100% battery capacity with system switched on.
Approximately 4 hours charge time to 100%
battery capacity with system switched off.
Approximately 1.5 days discharging time in Sleep
Mode for the 9-cell battery, 1 day for the 6-cell
battery.
Discharge time in shutdown mode is
approximately 1 month.
* The availability of this battery is dependent on
the model you purchased.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2
P200 Series Features
Disclaimer (Battery Life)
For more information on the Disclaimer regarding Battery Life, please refer
to the Disclaimers section in Chapter 11.
RTC Battery
The computer has an internal battery to back up
its Real Time Clock (RTC), calender and setup
information. This battery will last for an average of
one month with no external power source.
AC adapter
The universal AC adapter provides power to the
system and recharges the batteries when they
are low. It comes with a detachable power cord.
Floppy Disk Drive devices
External USB Floppy Disk Drive (depends on the
model purchased).
TouchPad
The TouchPad control buttons in the palm rest
enable control of the on-screen pointer.
The volume control on the right side of the TouchPad and print button may
not function with some applications.
Display
17" TFT screen with a resolution of
1440 horizontal × 900 vertical pixels.
Disclaimer (LCD)
For more information on the Disclaimer regarding LCD, please refer to the
Disclaimers section in Chapter 11.
Graphics controller
ATI Mobility. Radeon™ HD2400/HD2600
(Graphics controller chipset depends on the
model purchased)
The graphics controller maximizes display
performance. Refer to Display Modes section in
Appendix B for more information.
Disclaimer (Graphics Processor Unit ("GPU")
For more information on the Disclaimer regarding Graphic Processor Unit
("GPU"), please refer to the Disclaimers section in Chapter 11.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3
P200 Series Features
Disks
Fixed hard disk
9.5 mm 2.5" hard disk drive
(60/80/100/120/160/200 GB)
12.5 mm 2.5" hard disk drive
(160/200/250/300 GB)
Serial ATA 2.5 Gb/s
Disclaimer (HDD Drive Capacity)
For more information on the Disclaimer regarding HDD Drive Capacity,
please refer to the Disclaimers section in Chapter 11.
DVD Super Multi drive Some models are equipped with a full-size DVD
supporting R Double Super Multi drive supporting ±R Double Layer
Layer
module with dual layer support that lets you
record data to rewritable CD/DVDs as well as run
either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without using an adapter. It reads DVD-ROMs at
maximum 8x speed and CD-ROMs at maximum
24x speed. It writes CD-Rs at up to 24x speed,
CD-RWs at up to 16x speed, DVD-Rs at
maximum 8x speed, DVD-RWs at maximum
6x speed, DVD+RWs at maximum 8x speed,
DVD+Rs at maximum 8x speed, DVD+R (double
layer) at maximum 4x speed, DVD-R (dual layer)
at maximum 4x speed and DVD-RAM at
maximum 5x speed. This drive supports the
following:
■ DVD-ROM
■ DVD-R
■ DVD-Video
■ DVD-RW
■ DVD+R
■ DVD+RW
■ DVD-RAM
■ CD-R
■ DVD+R (double layer)
■ CD-RW
■ CD-DA
■ CD-Text
■ DVD-R (dual layer)
■ Photo CD (single/multi-session)
■ CD-ROM Mode1, Mode2
■ CD-ROM XA Mode2 (Form1, Form2)
■ Enhanced CD (CD-EXTRA)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4
P200 Series Features
HD DVD-ROM drive
HD DVD-ROM reads HD DVD-ROMs at
maximum 1x speed DVD-ROMs at maximum
8x speed and CD-ROMs at maximum 24x speed.
It writes CD-Rs at up to 16x speed, CD-RWs at up
to 10x speed, DVD-Rs at maximum 4x speed,
DVD-RWs at maximum 6x speed, DVD+RWs at
maximum 4x speed, DVD+Rs at maximum
4x speed, DVD+R (double layer) at maximum
2.4x speed, DVD-R (dual layer) at maximum
2x speed and DVD-RAM at maximum 3x speed.
This drive supports the following:
■ HD DVD-ROM
■ DVD-R
■ DVD-ROM
■ DVD-RW
■ DVD+RW
■ DVD-Video
■ CD-RW
■ DVD+R
■ DVD-RAM
■ CD-R
■ CD-DA
■ CD-Text
■ DVD+R (double layer)
■ Photo CD (single/multi-session)
■ CD-ROM Mode1, Mode2
■ CD-ROM XA Mode2 (Form1, Form2)
■ Enhanced CD (CD-EXTRA)
Computers in this series can be configured with multiple types of optical
disc drive. For more information on the optical disc drives available, talk to
your dealer. More information on using the optical disc drive can be found
in Chapter 4, Operating Basics.
Slots (depending on configuration)
Multiple Digital Media This slot lets you easily transfer data from
Card (SD/SDHC/MMC/ devices, such as digital cameras and Personal
MS/MS Pro/xD)
Digital Assistants, that use flash-memory.
You can use a memory module in this slot.
Express Card
The Express Card expansion slot that can
accommodate two standard module formats; an
Express Card/34 module and an Express Card/
54 module. An Express Card module is a small
addin card technology based on the PCI Express
and Universal Serial Bus (USB) interfaces.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5
P200 Series Features
Ports (depending on configuration)
External monitor
15-pin analog VGA port supports VESA DDC2B
compatible functions.
Universal Serial Bus The computer has Six Universal Serial Bus (USB)
ports that comply with the USB 2.0 standard,
which enables data transfer speeds more than
40 times faster than USB 1.1 (which this
computer also supports).
i.LINK (IEEE1394a)
TV Out
This port enables high-speed data transfer
directly from external devices such as digital
video cameras.
The 4-pin S-Video port is compatible with PAL or
NTSC TV standard, supporting Macrovision 7.02
copy protection.
HDMI
High Definition Multimedia Interface allows the
connection of other High Definition Devices such
as Televisions and DVD Players.
Multimedia
®
Sound system
The integrated Windows compatible sound
system provides support for internal speakers as
well as jacks for an external microphone and
headphones.
Line In Jack
S/PDIF Jack
Insert standard 3.5 mm jack to listen to audio.
Insert standard 3.5 mm jack to listen to audio
onspeakers or other external devices.
Headphone jack
Microphone jack
Web Camera
A standard 3.5 mm stereo jack is provided for the
connection of external headphones or speakers.
A standard 3.5 mm mini microphone jack enables
connection of monaural microphone input.
Record/Send still or video images with this
integrated Web Camera.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-6
P200 Series Features
Communications (depending on configuration)
Modem
An internal modem provides capability for data
and fax communication. It supports the V.90 or
V.92 standards depending on the region and
provides a modem jack for connection to a
telephone line. The speed of data and fax transfer
depends on the analog telephone line conditions.
LAN
The computer has built-in support for Ethernet
LAN (10 Mbps, 10BASE-T) and Fast Ethernet
LAN (100 Mbps 100BASE-TX).
Wireless LAN
The computer has a built-in wireless LAN mini-
PCI card that is compatible with other LAN
systems that support the following: 802.11a/b/g/n
wireless LAN module/ 802.11a/b/g wireless LAN
module/ 802.11b/g wireless LAN module. It has a
Frequency Channel Selection (2.4 or 5 GHz) and
allows roaming over multiple channels.
Bluetooth
Bluetooth is a short-range wireless technology
used to create PANs (Personal Area Networks)
among your devices, and with other nearby
devices like mobile computers, mobile phones,
and digital cameras.
Security
Power-on password protection.
Two level password architecture.
Security Lock Slot
Receives an optional security lock in order to
anchor the computer to a desk or other large,
heavy object.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-7
P200 Series Features
Special features
The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.
Hotkeys
Key combinations that let you quickly modify the
system configuration directly from the keyboard
without running a system configuration program.
Display Automatic
Power off
This feature automatically cuts off power to the
internal display when there is no input from the
keyboard or pointing device for a specified time
period. Power is restored when any key is
pressed or when there is input from a pointing
device. You can specify the time period in the
TOSHIBA Power Saver utility.
Hard Disk Drive
This feature automatically cuts off power to the
Automatic Power Off hard disk drive when it is not accessed for a
specified time period. Power is restored when the
hard disk is accessed. You can specify the time
period in the TOSHIBA Power Saver utility.
System Automatic
Sleep/Hibernation
This feature automatically places the system into
either Sleep Mode or Hibernation Mode when
there is no input or hardware access for a
specified time period. You can specify the time
period and select either System Sleep or System
Hibernate in the TOSHIBA Power Saver utility.
Power-on Password Two levels of password security are available,
Supervisor and User, which can prevent
unauthorized access to your computer.
Battery Save Mode
Instant Security
This feature lets you save battery power. You can
specify the level of system power management in
the TOSHIBA Power Saver utility.
A Hotkey function which blanks the screen and
activates password security to provide quick and
easy data security.
Panel Power Off/On
This feature turns power to the computer off when
the display panel is closed and turns it back on
when the panel is opened. You can specify the
setting in the TOSHIBA Power Saver utility.
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the TOSHIBA Power Saver utility.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-8
P200 Series Features
Hibernation
This feature lets you turn off the power without
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 3,
Getting Started, for details.
Sleep
In Sleep Mode, power to the system remains on,
but the processor and all other devices are
effectively in 'sleep mode'. When the computer is
in Sleep Mode, the Power LED flashes amber.
The computer enters Sleep Mode regardless of
the Hibernate Mode setting. Refer to the Turning
off the power section in Chapter 3, Getting
Started, for details.
■ Before entering Sleep mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in
Sleep mode. The computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in Sleep mode.
Data in memory will be lost.
TOSHIBA Value Added Package
This section describes the TOSHIBA Component features pre-installed on
the computer.
TOSHIBA Power
Saver
TOSHIBA Power Saver provides you with the
features of more various power supply
managements.
TOSHIBA Button
Support
This utility controls the buttom operation of the
computer. The starting application from the
buttom can be changed.
TOSHIBA PC
Diagnostic Tool
The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer’s builtin
hardware devices to be tested.
TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way
to modify selected system functions and to launch
applications.
■ Hot key function
■ TOSHIBA utility launcher function
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-9
P200 Series Features
When you start or resume your computer, the TOSHIBA Flash Cards may
take a moment to become available and may display several times before
completely activating. The hot key functions will be available once the
TOSHIBA Cards are completely active.
If your system is busy and you see a "Not Responding" message, allow
TOSHIBA Cards to completely activate before you continue to use the
utility and hot keys.
TOSHIBA
Components
Common Driver
TOSHIBA Components Common Driver contains
the module required for the utility which TOSHIBA
offers.
TOSHIBA
Accessibility
The TOSHIBA Accessibility utility provides
support to movement impaireed users when they
need to use the TOSHIBA Hot-key functions. In
use, the utility allows you to make the Fn key
‘sticky’, that is you can press it once, release it,
and they press one of the "F" keys in order to
access its specific function. When set, the Fn key
will remain active until another key is pressed.
TOSHIBA Zooming
Utility
This utility allows you to enlarge or reduce the
icon size on Windows Desktop or the zoom factor
associated with specific supported applications.
Utilities and Applications
This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
readme.txt files.
TOSHIBA Assist
TOSHIBA Assist is a graphical user interface that
provides easy access to help and services.
DVD Video Player
The DVD player is used to play DVD Video media
through an on-screen interface and functions.
Frame dropping, audio skipping or out of synch audio and video may occur
during playback of some DVD Video titles. Make sure to connect the
computer’s AC adaptor when playing a DVD Video. Power-saving features
may interfere with smooth playback.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-10
P200 Series Features
TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy
control of communication devices and network
connections. ConfigFree also allows you to find
communication problems and create profiles for
easy switching between location and
communication networks.
To start ConfigFree, click Start ꢀ
All Programs ꢀ TOSHIBA Networking ꢀ
ConfigFree.
TOSHIBA Disc
Creator
You can create discs in several formats including
audio CDs that can be played on a standard
stereo CD player and data discs to store the files
and folders on your hard disk drive. This software
can be used on a model with a CD-RW/
DVD-ROM drive, DVD Super Multi drive, or
HD DVD drive.
TOSHIBA Hardware
Setup
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To access
this utility, click Start Button ꢀ All Programs ꢀ
TOSHIBA ꢀ Utilities ꢀ HWsetup.
CD/DVD Drive
Acoustic Silencer
This utility allows you to configure the read speed
of CD drive. You can either configure Normal
Mode, which operates the drive at its maximum
speed for quick data access, or Quiet Mode,
whcih runs at single speed for CD audio and
which can lessen operational noise. It is
ineffective in DVD.
Ulead DVD
MovieFactory for
You can edit digital video and make a DVD-Video
and support Labelflash™ function.
®
TOSHIBA
The availability of Labelflash™ function depends on the model you
purchased.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1-11
P200 Series Features
Windows Mobility
Center
Mobility Center is a utility for accessing several
mobile PC settings quickly in one window. A
default maximum of eight tiles are provided by the
operating system, and the additional two titles are
added to your Mobility Center
■ Lock Computer:
This can be used to lock your computer
without turning it off. This has the same
function as the Lock button at the bottom of
the right pane in the start menu.
■ TOSHIBA Assist:
This can be used to open TOSHIBA Assist if
it is already installed in your computer.
Options
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
Memory Modules
Two memory module can be installed in this
computer.
Use only PC5300* compatible DDRII memory modules. See your
TOSHIBA dealer for details.
* The availability of DDRII is dependent on the model you purchased.
Battery Pack
An additional battery pack can be purchased from
your TOSHIBA dealer. Use it as a spare to
increase your computer operating time.
High capacity battery An additional battery pack can be purchased from
pack
your TOSHIBA dealer. Use it as a spare to
increase your computer operating time.
AC adapter
If you use your computer at more than one site
frequently, it may be convenient to purchase an
additional AC adapter for each site so you will not
have to carry the adapter with you.
USB Floppy Disk
Drive
Lets you attach a floppy disk drive to your
computer by means of a USB cable.
User’s Manual
1-12
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Chapter 2
The Grand Tour
This chapter identifies the various components of your computer. Become
familiar with each component before you operate the computer.
Certain types of notebook chassis are designed to accommodate all
possible configurations for an entire product series. Your selected model
may not have all the features and specifications corresponding to all of the
icons or switches shown on the notebook chassis, unless you have
selected all those features.
Front with the display closed
The following figure shows the computer front with its display panel in the
closed position.
1
2
3
4
5
6
11 12
7
8
9
10
13
1. Front Edge Logo*
2. DC IN LED
3. Power LED
8. Line In Jack
9. Microphone Jack
10. S/PDIF Jack
4. Battery LED
5. Hard Disk Drive LED
11. Headphone Jack
12. Volume Control
6. Multiple Digital Media Card Slot
13. Multiple Digital Media Card Slot*
Access LED*
7. Wireless Communication Switch
and LED*
* The availability of this feature is dependent on the model you purchased.
Front of the computer with display closed
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-1
The Grand Tour
Front Edge Logo*
Front Edge Logo indicates the computer series
you bought.
(The avaliability of this function is dependent on
the model you purchased.)
DC IN LED
Power LED
The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged into
an AC power source.
In normal operating mode, the Power LED is blue
(depending on the model you purchased). If the
system is in SleepSleep Mode the LED will flash
amber, while the LED will be off when the
computer is turned off or is in Hibernation Mode.
Battery LED
The Battery LED indicates the battery's current
charge/discharge status. It lights blue (depending
on the model you purchased) when the battery is
fully charged. It lights amber while the battery is
being charged from the AC adapter. It flashes
amber when the battery capacity is low.
Hard Disk Drive LED The Hard Disk Drive LED indicates that the hard
disk drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the hard disk drive, this light will go on.
Multiple Digital Media The Multiple Digital Media Card Slot Access LED
Card Slot Access
LED*
lights up when the Multiple Digital Media Card is
accessed.
(The avaliability of this function is dependent on
the model you purchased.)
Wireless
Communication
Switch and LED*
The wireless communication switch turns on the
wireless networking transceiver. The Wireless
Communication LED beside it indicates that
wireless networking is turned on. Indicates
whether the Wireless devices is active or not.
(The avaliability of this function is dependent on
the model you purchased.)
Line In Jack
Insert standard 3.5 mm jack to listen to audio.
Microphone Jack
The standard 3.5 mm mini microphone jack
enables connection of a three conductive type
mini-jack for a monaural microphone.
S/PDIF Jack
Insert standard 3.5 mm jack to listen to audio on
speakers or other external devices.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2
The Grand Tour
Headphone Jack
Volume Control
The headphone jack lets you connect stereo
headphones or other audio-output devices such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.
Use this dial to adjust the volume of the stereo
speakers or headphones.
Multiple Digital Media The Multiple Digital Media Card Slot allows you to
Card Slot*
use media cards from digital still cameras and
various forms of portable information equipment.
(The availability of this function depends on the
model you purchased.)
Right side
The following figure shows the computer's right side.
1
2
3
4
5
1. Universal Serial Bus (USB) Port
2. Modem Jack
4
5
Fan Vents*
Security Lock
3. Optical Disc Drive and LED
* The availability of this feature is dependent on the model you purchased.
The right side of the computer
Universal Serial Bus The Universal Serial Bus (USB 2.0 and
(USB) Port
1.1 compatible) port enables USB-equipped
devices such as keyboards, mice, hard drives,
scanners, and printers to be connected to the
computer.
Modem Jack
In regions where an internal modem is installed
as standard equipment, this jack lets you use a
modular cable to connect the modem directly to a
telephone line.
User’s Manual
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Optical Disc Drive and The computer is configured with a full-size optical
LED
disc drive module that lets you run either 12 cm
(4.72") or 8 cm (3.15") discs without using an
adapter. See the Drives section in this chapter for
technical specifications on each drive and
Chapter 4, Operating Basics, for information on
using the drive and caring for discs.The LED lets
you know when the Optical Disc Drive is being
accessed.
Fan Vents*
The fan vents help prevent the GPU from
overheating.
(The avaliability of this function is dependent on
the model you purchased.)
To prevent possible over heating of the GPU, never block the fan vents.
Security Lock
An optional security cable attaches to this port in
order to anchor your computer to a desk or other
large object to deter theft.
Left side
The following figure shows the computer's left side.
7
1
2
3
4
5
6
8
9
1. DC IN 19V Jack
2. RGB Monitor Port
3. Fan Vents
6. TV Out Port
7. HDMI Port
8. i.LINK (IEEE1394a) Port*
9. Express Card Slot
4. Lan Jack
5. Universal Serial Bus (USB) Port
* The availability of this feature is dependent on the model you purchased.
The left side of the computer
DC IN 19V Jack
RGB Monitor Port
Fan Vents
The DC IN jack is where you plug in the AC
adapter.
This 15-pin port lets you connect an external
video display to the computer.
The fan vents help prevent the CPU from
overheating.
User’s Manual
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
To prevent possible over heating of the CPU, never block the fan vents.
LAN Jack
This jack lets you connect to a LAN. The adapter
has built-in support for Ethernet LAN
(10 megabits per second, 10BASE-T), Fast
Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN
(1000 megabits per second, 1000BASE-T).
Two indicators built into the jack let you see the
LAN status.
Universal Serial Bus The Universal Serial Bus (USB 2.0 and
(USB) Port
1.1 compatible) port enables USB-equipped
devices such as keyboards, mice, hard drives,
scanners, and printers to be connected to the
computer.
TV Out Port
HDMI Port
Connect a 4-pin S- video cable into this connector
in order to output either an NTSC or PAL
television signal.
This port allows you to connect an HDMI device
such as a Televison.
i.LINK (IEEE1394a)
Port
This port allows you to connect an external
device, such as a digital video camera, for high-
speed data transfer.
Express Card Slot
This slot allows you to insert an Express Card. An
Express Card module is a small, modular add-in
card technology based on PCI Express and
Universal Serial Bus (USB) interface. The max.
transmission rate at 2.5 Gbps. Both 34 mm type
and 54 mm type are supported.
Back side
The following figure shows the computer's back side.
The back side of the computer
User’s Manual
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Underside
The following figure shows the underside of the computer. Make sure the
display is closed before turning over your computer.
6
5
4
3
2
7
8
9
1
1. Battery Pack
2. Fan Vent
3. Battery Pack Lock
4. Subwoofer
5. HDD1
6. HDD2*
7. Expansion Memory Socket
8. Fan Vent
9. Battery Pack Latch
* The availability of this feature is dependent on the model you purchased.
The bottom of the computer
Battery Pack
The battery pack powers the computer when the
AC adapter is not connected. For detailed
information on the battery pack, refer to
Chapter 7, Power and Power-Up Modes.
Fan VentS
The fan vents help prevent the CPU from
overheating.
Battery Pack Lock
When you slide this into its locked position, the
battery pack cannot be released even if you
attempt to slide the battery pack latch into its open
position.
Subwoofer
A subwoofer dedicate to the reproduction of bass
frequencies.
HDD1
Hard Disk Drives store data, files and programs.
Hard Disk Drives store data, files and programs.
HDD2*
(The availability of this function depends on the
model you purchased.)
User’s Manual
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Expansion Memory
Socket
Use this socket to install a memory module to
increase your computer's memory. Refer to the
Memory expansion section in Chapter 9, Optional
Devices.
To prevent possible overheating of the CPU, never block the fan vents.
Battery Pack Latch
With the Battery Pack Lock in its unlocked
position, you can slide this latch in order to
remove the battery pack.
Front with the display open
The following figure shows the front of the computer with the display open.
To open the display, slide the latch on the front of the display and lift it up.
Position the display at a comfortable viewing angle.
13
14
5
6
1
2
7
8
9
10
11
12
3
4
1. Display Screen
9. Stop*
2. Left and Right Speakers
3. TouchPad
4. TouchPad Control Buttons
5. Power Button
10. Previous Button*
11. Next Button*
12. Number Pad
13. Web Camera*
14. Microphone*
6. Internet Button*
7. CD/DVD Button*
8. Play/Pause Button*
* The availability of this feature is dependent on the model you purchased.
The front with the display open
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-7
The Grand Tour
Display Screen
The LCD displays high-contrast text and graphics
at a resolution up to 1440 × 900 pixels. Refer to
Appendix B - Display Modes for further
information. When the computer operates from
the AC adapter, the display screen's image will be
somewhat brighter than when it operates on
battery power - this is normal and is designed to
conserve battery power.
To prolong the life of your display screen, use a screen saver when you're
not using the computer and it is idle.
Left and Right
Speakers
The computer provides two speakers for stereo
sound reproduction.
TouchPad
The TouchPad pointing device is located in the
centre of the palm rest and is used to control the
on-screen pointer.
TouchPad Control
Buttons
Control buttons below the TouchPad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.
Power Button
Press the power button to turn the computer's
power on and off. There is an LED inside the
power button which shines in blue (depending on
the model you purchased) when the system is on.
Internet Button*
Press this button to launch an Internet browser.If
the computer’s power is off, you can press this
button to turn on the computer’s power and
launch the browser automatically in one step.
(The availability of this function depends on the
model you purchased.)
CD/DVD Button*
Pressing this button will launch an application
program that allows for watching CD/DVD.
An application that is launched differs by a model:
Windows Media Player/DVD Video Player.
(The availability of this function depends on the
model you purchased.)
Play/Pause Button*
Press this button to begin playing an audio CD, a
DVD movie or digital audio files. This button also
acts as a Pause button.
(The availability of this function depends on the
model you purchased.)
Stop*
Stops playing the CD, DVD or digital audio.
(The availability of this function depends on the
model you purchased.)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-8
The Grand Tour
Previous Button*
Next Button*
Skips backwards to the previous track, chapter or
digital file. Refer to Chapter 4, Operating Basics,
for details.
(The availability of this function depends on the
model you purchased.)
Skips forward to the next track, chapter or digital
file. Refer to Chapter 4, Operating Basics, for
details.
(The availability of this function depends on the
model you purchased.)
®
If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.
Number Pad
Press the Number Lock button to activate the
number pad. Use the number pad instead of the
number buttons on the keyboard to enter
numbers and ASCII codes.
Web Camera*
Take your picture or send your image to web
contacts.
(The availability of this function depends on the
model you purchased.)
Microphone*
The Microphone is used with the Web Camera to
talk to other Web Camera users and to record
messages on windows media.
(The availability of this function depends on the
model you purchased.)
Keyboard Indicators
CAPS
LOCK
Numeric
Mode
Caps Lock
Numeric Mode
You can use the numeric pad for numeric input
when the Numeric mode icon lights green. Refer
to the Number Pad section in Chapter 6, The
Keyboard.
Caps Lock
The Caps Lock LED lights when you press the
Caps Lock key. When this light is on, pressing a
letter key on the keyboard produces an
uppercase (capital) letter.
CAPS
LOCK
User’s Manual
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Optical Disc drive
The computer will have a single layer or dual layer DVD Super Multi drive
or HD DVD drive supporting ±R Double Layer depending on its
configuration. An ATAPI interface controller is used for the operation of
these optical drives. When the computer is accessing a disc, an indicator
on the drive glows.
Region codes for DVD drives and media
The disc drive and its media are manufactured according to the
specifications of six marketing regions. When you purchase DVD-Video,
make sure it matches your drive, otherwise it will not play properly.
Code
Code
1
2
3
4
Canada, United States
Japan, Europe, South Africa, Middle East
Southeast Asia, East Asia
Australia, New Zealand, Pacific Islands, Central
America, South America, Caribbean
5
6
Russia, Indian Subcontinent, Africa, North Korea,
Mongolia
China
Writable discs
This section describes the types of writable discs. Check the specifications
for your drive to for the type of discs it can write. Use TOSHIBA Disc
Creator to write compact discs. Refer to Chapter 4, Operating Basics.
CDs
■ CD-R discs can be written only once. The recorded data cannot be
erased or changed.
■ CD-RW discs can be recorded more than once. Use either 1x, 2x, or
4x multi-speed CD-RW discs or high-speed 4x to 10x discs. The write
speed of ultra-speed CD-RW discs is a maximum of 24x speed.
DVDs
■ DVD-R and DVD+R discs can be written only once. The recorded data
cannot be erased or changed.
■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than
once.
User’s Manual
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
DVD Super Multi drive supporting ±R Double Layer
The full-size DVD Super Multi drive supporting ±R Double Layer module
lets you record data to rewritable discs as well as run either 12 cm (4.72")
or 8 cm (3.15") discs without using an adapter.
The read speed is slower at the centre of a disc and faster at the outer
edge.
DVD read
8 speed (maximum)
DVD-R write
DVD-RW write
DVD+R write
DVD+RW write
DVD-RAM write
CD read
8 speed (maximum)
6 speed (maximum)
8 speed (maximum)
8 speed (maximum)
5 speed (maximum)
24 speed (maximum)
24 speed (maximum)
16 speed (maximum, Ultra-speed media)
4 speed (maximum)
CD-R write
CD-RW write
DVD+R (DL) write
DVD-R (DL) write
4 speed (maximum)
This drive cannot use discs that allow writing faster than 8x speed or faster
(DVD-R and DVD+R with Single Layer), 6x speed or faster (DVD-RW),
8x speed or faster (DVD+RW), 5x speed (DVD-RAM) or ultra-speed or
faster (CD-RW).
HD DVD-ROM drive
The HD DVD-ROM supporting ±R Double Layer module lets you record
data to rewritable discs as well as run either 12 cm (4.72") or 8 cm (3.15")
discs without using an adapter.
The read speed is slower at the centre of a disc and faster at the outer
edge.
HD DVD read
DVD read
1 speed (maximum)
8 speed (maximum)
DVD-R write
DVD-RW write
DVD+R write
DVD+RW write
DVD-RAM write
CD read
4 speed (maximum)
4 speed (maximum)
4 speed (maximum)
4 speed (maximum)
3 speed (maximum)
24 speed (maximum)
16 speed (maximum, Ultra-speed media)
CD-R write
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-11
The Grand Tour
CD-RW write
10 speed (maximum)
2.4 speed (maximum)
2 speed (maximum)
DVD+R (DL) write
DVD-R (DL) write
This drive cannot use discs that allow writing faster than 4x speed or faster
(DVD-R and DVD+R with Single Layer), 4x speed or faster (DVD-RW and
DVD+RW), 3x speed (DVD-RAM) or ultra-speed or faster (CD-RW).
AC adapter
The AC adapter converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to
use the computer in almost any country/region.
To recharge the battery, simply connect the AC adapter to a power source
and the computer. See Chapter 7, Power and Power-Up Modes, for details.
The AC adapter
Use of the wrong adapter could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 19 volts DC.
Please use only the AC Adapter supplied with the computer or an AC
adapter certified by TOSHIBA.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2-12
Getting Started
Chapter 3
Getting Started
This chapter provides basic information to get you started using your
computer. It covers the following topics:
Be sure also to read Instruction Manual for Safety & Comfort. This guide,
which is included with the computer, explains product liability.
■ Connecting the AC adapter
■ Opening the display
■ Turning on the power
■ Starting up for the first time
■ Turning off the power
■ Restarting the computer
■ Restoring the pre-installed software from the Product Recovery media.
time, which describes the actions to take when you turn on the power for
the first time.
Connecting the AC adapter
Attach the AC adapter when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power. The AC adapter can be connected to any power source
supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the
AC adapter to charge the battery pack, refer to Chapter 7, Power and
Power-Up Modes.
Use of the wrong adapter could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 19 volts DC.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1
Getting Started
1. Connect the power cord to the AC adapter.
Connecting the power cord to the AC adapter
2. Connect the DC output plug on the AC adapter to the DC IN input port
on the back of the computer.
Connecting the adapter to the computer
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
To disconnect AC adaptor, you can follow the reversed procedure of
Connecting AC adaptor. Please hold the DC output plug portion by your
fingers and then plug it out when you disconnect the DC output plug.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer.
Opening the display
2. Lift the panel up and adjust it to the best viewing angle for you.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first
time in this chapter.
1. If a USB floppy disk drive is connected, make sure the drive is empty - if a
disk is in the drive, press the eject button to remove it.
2. Open the display panel.
3. Press the computer's power button and then release it.
Turning on the power
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3
Getting Started
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
®
Windows Vista Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.
®
Be sure to read the Windows Operating System End User License
Agreement carefully.
Turning off the power
The power can be turned off in one of three modes, either Shutdown (Boot)
Mode, Hibernation Mode or Sleep Mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1. If you have entered data, either save it to the hard disk, drive or to other
storage media.
2. Make sure all disk/disks activity has stopped before removing the
CD/DVD or floppy diskette.
■ Make sure the Hard Disk Drive indicators is off. If you turn off the
power while a disk (disks) is being accessed, you can lose data or
damage the disk.
■ Never turn off the power while an application is running. Doing so could
cause loss data.
■ Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.
3. Click Start then click the arrow button (
) located in the power
management buttons (
menu.
) and select Shut Down from the
4. Turn off any peripheral devices connected to your computer.
Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid and peripheral damage.
Sleep Mode
If you do have to interrupt your work, you are able to turn off the power
without exiting from your software by placing the computer into Sleep
Mode. In this mode data is maintained in the computer’s main memory so
that, when you turn on the power again, you can continue working right
where you left off
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-4
Getting Started
■ When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options.
■ To restore the operation from the computer from Sleep Mode, press the
power button or press any key. Please be aware that this latter action
only works on the internal keyboard if the. Wake-up on Keyboard
option is enabled within the HW Setup utility.
■ If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is next
turned on and the system returns from Sleep Mode.
■ To prevent the computer from automatically entering Sleep Mode,
disable Sleep Mode within the Power Options. However, please be
aware that this configuration will nullify the computer’s Energy Star
compliance.
■ Before entering Sleep Mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in
Sleep Mode. The Computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in Sleep Mode
(unless the computer is connected to an AC power source). Data in
memory will be lost.
Benefits of Sleep Mode
■ Restore the previous working enviroment more rapidly than does the
Hibernation Mode feature.
■ Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Sleep Mode feature.
■ Allows the use of the panel power off feature.
Executing Sleep Mode
You can enter also Sleep Mode by pressing Fn + F3 - please refer to
Chapter 6, The Keyboard, for further details.
Youu can enter Sleep Mode in one of three ways:
1. Click Start then click the sleep button (
) located in the power
management buttons (
), or click the arrow button (
)
and select Sleep from the menu.
2. Close the computer’s LCD display panel. Please note that this feature
must be enabled - please refer to the Power Options (to access it, click
Start ꢀ Control Panel ꢀ System and Maintenance ꢀ Power
Options).
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-5
Getting Started
3. Press the power button. Please note that this feature must be enabled
- please refer to the Power Options (to access it, click Start ꢀ
Control Panel ꢀ System and Maintenance ꢀ Power Options ꢀ
Choose what the power button do).
When you turn the power back on, you can continue where you left when
you shutdown the computer.
■ When the computer is in Sleep Mode, the power indicator will blink
orange.
■ If you are operating the computer on battery power, you can lengthen
the overall operating time by turning it off into Hibernation Mode - Sleep
Mode will consume more power while the computer is off.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
■ Power is turned back on immediately after shutting down.
■ Memory circuits are exposed to static electricity or electrical noise.
Hibernation mode
The Hibernation Mode feature saves the contents of memory to the hard
disk drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode
feature does not save the status of any peripheral devices connected to the
computer.
■ Save your data. While entering Hibernation Mode, the computer saves
the contents of memory to the hard disk drive. However, for safety
sake, it is best to save your data manually.
■ Data will be lost if you remove the battery or disconnect the AC adaptor
before the save is completed. Wait for the Hard Disk Drive indicator to
go out.
■ Do not install or remove a memory module while the computer is in
Hibernation Mode. Data will be lost.
Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
■ Saves Data to the hard disk drive when the computer automatically
shutsdown because of a low battery condition.
■ You can return to your previous working environment immediately when
you turn on the computer.
■ Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System
Hibernate feature.
■ Allows the use of the panel power off feature.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-6
Getting Started
Starting Hibernation Mode
You can also enable Hibernation Mode by pressing Fn + F4 - please refer
to Chapter 6, The Keyboard, for further details.
To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Click the arrow button (
).
) in the power management buttons
(
3. Select Hibernate from the menu.
Automatic Hibernation Mode
The computer can be configured to enter Hibernate Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Maintenance and click Power Options.
3. Click Choose what the Power Button do or Choose what closing
the lid does.
4. Enable the desired Hibernation Mode settings for When I press the
power button or When I close the lid.
5. Click the Save Changes button.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-7
Getting Started
Restarting the computer
Certain conditions require that you reset the computer, for example if:
■ You change certain computer settings.
■ An errors and the computer does not respond you your keyboard
commands.
If you need to restart the computer, there are three ways this can be
achieved:
1. Click Start then click the arrow button (
) in the power management
buttons ( ) and select Restart from the menu.
2. Press Ctrl + Alt + Del to display the menu window, then select Restart
from the Shutdown options.
3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.
System Recovery Options
About 1.5 GB hidden partition is allocated on the hard disk drive for the
System Recovery Options.This partition stores files which can be used to
repair the system in the event of a problem.
The System Recovery Options feature will be unusable if this partition is
deleted.
System Recovery Options
The System Recovery Options feature is installed on the hard disk when
shipped from the factory. In the event that an error occurs between the time
power is turned ON and login, and the error is repairable, the Windows
Recovery Enviroment will automatically repair the error.
The Window Recovery Environment can also be run manually to repair
errors.
The procedure is as follows. Follow the instructions shown on the on-
screen menu.
1. Turn off the computer.
2. While holding the F8 key, turn the computer again.
3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press Enter.
4. Follow the on-screen instructions.
The Windows Vista™ Complete PC Backup feature can be used on
Windows Vista™ Business Edition and Ultimate Edition.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-8
Getting Started
Restoring the pre-installed software from the Product
Recovery disc
If preinstalled files are damaged, use the Product Recovery disc to restore
them. To restore the operating system and all preinstalled software, follow
the steps below.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost. You can not use System Recovery
Options if restoring the pre-installed software without System Recovery
options.
1. Load the Product Recovery disc in the drive and turn off the computer's
power.
2. Switch on the computer and, when the In Touch with Tomorrow
TOSHIBA prompt appears, press the F12 key to display the Boot Menu.
For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as
follows:
■ Select <Enter Setup>
■ Press the F9 key to set to default settings, and select the [Yes].
■ When the "In Touch with Tomorrow TOSHIBA "prompt appears,
press the F12 key to display the Boot menu. Continue with step 3.
3. Use the up or down cursor key to select the CD-ROM/DVD drive in the
display menu.
4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software
can not be recovered from the Product Recovery disk. Re-install these
applications (e.g. Works Suite, DVD Player, Games, etc.) separately
from other media.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3-9
Operating Basics
Chapter 4
Operating Basics
This chapter gives information on basic operations including using the
TouchPad, optical disc drives, the internal modem, LAN and wireless LAN.
It also provides tips on caring for your computer and on heat dispersal.
Using the TouchPad
To use the TouchPad, simply move your finger tip across it in the direction
you want the on-screen pointer to go.
2
1
1. TouchPad control buttons
2. TouchPad/Dual Mode Pad
TouchPad and control buttons
The two buttons below the TouchPad are used like the buttons on a
standard mouse.
Press the left button to select a menu item or to manipulate text or graphics
designated by the pointer. Press the right button to display a menu or other
function depending on the software you are using.
Do not press on the TouchPad too hard or press a sharp object such as a
ball point pen against it. The TouchPad could be damaged.
The TouchPad has similar functions to a two-button mouse with a scroll
wheel. For some functions, you can tap it instead of pressing a button.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-1
Operating Basics
You can customize pointing device actions in Mouse Properties. Open the
Control Panel, select the Mouse icon and press Enter to open the Mouse
Properties window.
Click:
Click the left control button or tap the TouchPad once.
Double-click: Click the left control button twice or tap the TouchPad twice.
Scroll
Vertical: Move your finger up or down the right edge of the
TouchPad.
Horizontal: Move your finger left or right along the bottom
edge of the TouchPad.
Using the Web Camera
This section describes the bundled Web Camera utility, which can
Snapshot and video images. The Web Camera will auto-run when
Windows starts.
1
2
1. Web Camera Led
2. Web Camera Lens
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2
Operating Basics
Using the software
The Web Camera software is pre-configured to start when you turn on
Windows Vista; if you need to restart it go to Start ꢀ Programs ꢀ Camera
Assistant Software ꢀ Camera Assistant Software.
1
3
2
4
5
6
8
7
1. Capture still images
2. Video Recording
3. Audio Recording
4. Function
5. Display Window
6. Camera Resolution
7. Mute
8. Effects
Snapshot
Click to see a preview of the Snapshot image; you
can also e-mail the image.
Video Recording
Audio Recording
Functions
Click to start recording, click again to stop
recording and see a preview of the video.
Click to start recording, click again to stop and
listen to a preview of the audio.
Access additional functions: About, Player,
Effects, Properties, Settings and Help.
About
Player
Effects
Displays software manufacturer details.
Play video files.
Choose images to be displayed on the capture
screen.
Properties
Choose from the Options tab to flip, zoom, flicker
rate, night mode and backlight compensation; in
the Image tab change the colour settings; in the
profile tab change the lighting conditions.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-3
Operating Basics
Settings
Choose from the: Options tab to change the tool
position; the Picture tab to select picture output
options such as size, export file and saving
location; the Video tab to choose output settings
such as Frame Rate, Size, Compression and the
file save path; the Audio tab to chnage the Audio
Device, Compression, Volume and file save path.
Help
Displays the help files for the software.
Using the internal modem
This section describes how to setup the modem and use it to connect to
other computer systems. Refer to the computer's online help files and the
online help files for your modem software, for more information.
The internal modem does not support the voice functions described in the
help files. All data and fax functions are supported.
■ In case of a lightning storm, unplug the modem cable from the
telephone jack.
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord indicated in this manual.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4
Operating Basics
Region selection
Telecommunication regulations vary from one country/region to another, so
you will need to make sure the internal modem's settings are correct for the
country/region in which it will be used.
1. Open the Modem Region Select application. It is located on the
Programs menu at TOSHIBA ꢀ Networking ꢀ Modem Region
Select.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.
2. The Region Selection icon appears on the Windows Task Bar.
The Region Selection icon
3. Click the icon with the primary mouse button to display a list of regions
that the modem supports. A sub menu for telephony location
information will also be displayed. A check will appear next to the
currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.
■ When you click a region it becomes the modem's region selection,
and the New Location for telephony will be set automatically.
■ When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem's current region
setting.
Properties menu
Click the icon with the secondary mouse button to display the following
menu.
The properties menu
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5
Operating Basics
Settings
You can enable or disable the following settings:
AutoRun Mode
Region Select Utility starts automatically when you start up the operating
system.
Open the Dialling Properties dialogue box after selecting
region
The dialling properties dialogue box will be displayed automatically after
you select the region.
Location list for region selection
A submenu appears displaying location information for telephony.
Open dialogue box, if the modem and Telephony Current
Location region code do not match
A warning dialogue box is displayed if current settings for region code and
telephony location are incorrect.
Modem Selection
If the computer cannot recognize the internal modem, a dialogue box is
displayed. Select the COM port for your modem to use.
Dialing Properties
Select this item to display the dialling properties.
If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select Japan
region mode. It is illegal to use the modem in Japan with any other
selection.
Connecting
To connect the internal modem cable, follow the steps below.
■ In case of a lightning storm, unplug the modem cable from the
telephone jack.
■ Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-6
Operating Basics
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected.
If you find that the modem speed is low or communication is interrupted
when you are using the modem, please set the CPU speed to Maximum
within the TOSHIBA Power Saver utility.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
LAN
The computer is equipped with networking hardware that supports Ethernet
LAN (10 megabits per second, 10BASE-T) or Fast Ethernet LAN
(100 megabits per second, 100BASE-T).
Do not install or remove an optional memory module while the Wake-up on
LAN feature is enabled.
The Wake-up on LAN feature does not work on battery power. In
Hibernate/Power off mode you should always leave the computer
connected to the AC adapter if you are using this feature.
Connecting the LAN cable
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you
can connect using either a CAT5 or a CAT3 cable.
If you are using 100BASE-TX Fast Ethernet you must connect using a
CAT5 cable.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-7
Operating Basics
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with
the IEEE802.11a, 11b, 11g and Draft 11n wireless LAN standards.
It supports the following:
■ Automatic Transmit Rate Select mechanism in the transmit range of 54,
48, 36, 24, 18, 9, 6 Mbps for 802.11a/b/g and 802.11b/g wireless LAN
module.
■ Advanced Encryption Standard (AES) data encryption, based on 256 bit
encryption algorithm.
Wake-up on Wireless LAN is supported on certain Wireless LAN model
from Sleep/Hibernate mode in AC adaptor mode.
(depending on the model you purchased.)
■ Frequency Channel Selection (5 GHz and 2.4 GHz)
■ Roaming over multiple channels
■ Card Power Management
■ Wi-Fi Protected Access (WPA) data encryption
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8
Operating Basics
11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b,
802.11g and 802.11n respectively. The IEEE 802.11n specification has not
been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n
Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the
IEEE 802.11n specification. An Adapter with 11a/b, 11a/b/g or 11a/b/g/n
can communicate on any of its supported formats; the actual connection
will be based on the access point to which it connects.
Connection compatibility with the wireless equipment in Draft 11n mode is
not guaranteed.
The Draft 11n function cannot be used with WEP/TKIP. Draft 11n mode can
be used only with WPA-PSK (AES) mode or no security mode.
Security
1. TOSHIBA strongly recommends that you enable the WPA encryption
function otherwise your computer could be left open to illicit access via
the wireless LAN connection which may result in an intrusion that can
lead to the theft or loss of stored data among other things. In addition,
the owner of an Internet connection is responsible for all browsing,
downloading, and uploading activities on that connection. Therefore, an
unsecured wireless network connected directly to the Internet is an
open invitation for outsiders to abuse your ISP account and privileges.
2. TOSHIBA is not liable for the eavesdropping on your data due to the
use of the wireless LAN connection and any damage that may occur
thereof.
Bluetooth wireless technology
®
Bluetooth wireless technology eliminates the need for cables between
electronic devices such as desktop computers, printers and mobile phones.
Bluetooth wireless technology has the following features:
Worldwide operation
The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band,
which is license-free and compatible with radio systems in most countries
in the world.
Radio links
You can easily establish links between two or more devices. The link is
maintained even if the devices are not within line of sight.
Security
Two advanced security mechanisms ensure a high level of security:
■ Authentication prevents access to critical data and makes it impossible
to falsify the origin of a message.
■ Encryption prevents eavesdropping and maintains link privacy.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-9
Operating Basics
Bluetooth® Stack for Windows® by TOSHIBA
Please note that this software is specifically designed for the following
operating systems:
®
■ Microsoft Windows Vista™
Detailed information regarding the use with these operating systems is
listed below. Please refer also to the electronic information which is
included with each software.
®
®
This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0+EDR
specification. TOSHIBA cannot confirm compatibility between any PC
products and/or other electronic devices that use Bluetooth™ other than
TOSHIBA mobile PCs.
®
Release Notes related to the Bluetooth Stack for
®
Windows by TOSHIBA
1. Fax application software:
Regarding FAX application software, there are some software that you
®
cannot use on this Bluetooth Stack.
2. Multi User:
On Windows Vista, the use of Bluetooth is not supported in a multi-user
environment. This means that, when you use Bluetooth, other users
logged onto the same computer will not be able to use its Bluetooth
functionality.
Product Support:
The latest information regarding Operating System support, Language
Support or available upgrades can be found on our web site
Wireless communications
It may not be possible to make a network connection to a specified network
name using the ad hoc network function. If this occurs, the new network(*)
will have to be configured for all computers connected to the same network
in order to re-enable network connections.
* Please be sure to use new network name.
Wireless communication switch
You can enable or disable the Wireless devices function with the on/off
switch. No transmissions are sent or received when the switch is off. Slide
the switch forward to turn it on and backward to turn it off.
Turn the switch off in airplanes and hospitals. Check the LED, it stops
glowing when the wireless communication function is off.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-10
Operating Basics
Wireless communication LED
The LED indicates the status of the wireless communication functions.
LED status
LED off
Indication
Wireless communication switch is set to off.
Wireless communication switch is on.
LED glows
Using optical disc drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of disc-based programs. You can run either
12 cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface
controller is used for disc drive operation. When the computer is accessing
a disc, an indicator on the drive illuminates.
Use the DVD Video Player to view DVD-Video discs.
If you have a DVD Super Multi drive or HD DVD drive, refer also to the
Writing CD/DVDs on DVD Super Multi drive section or HD DVD section for
precautions on writing to CDs.
Loading optical disc media
To load a disc, follow the steps below.
1. Turn on the power.
2. a. Press the eject button to open the drawer slightly.
Eject button
Pressing the eject button
b. Pressing the eject button will not open the drawer when the
computer's power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened paper
clip into the eject hole just to the right of the eject button.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-11
Operating Basics
Manual release with the eject hole
3. Grasp the drawer gently and pull until it is fully open.
Pulling the drawer open
4. Lay the disc, label side up, in the drawer.
Inserting a disc
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-12
Operating Basics
Be careful not to touch the lens or the area around it. Doing so could cause
the drive to malfunction.
5. Press gently at the centre of the disc until you feel it click into place. The
disc should lie below the top of the spindle, flush with its base.
6. Push the centre of the drawer to close it. Press gently until it locks in
place.
If the disc is not seated properly when the drawer is closed, it might be
damaged. Also, the drawer might not open fully when you press the eject
button.
Closing the drive drawer
Removing optical disc media
To remove the disc, follow the steps below.
Do not press the eject button while the computer is accessing the disc
drive. Wait for the optical disc indicator to go out before you open the
drawer. Also, if the disc is spinning when you open it, wait for it to stop
before you remove it.
1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.
■ When the drawer pops open slightly, wait a moment to make sure the
disc has stopped spinning before pulling the drawer fully open.
■ Turn off the power before you use the eject hole. If the disc is spinning
when you open the drawer, it could fly off the spindle and cause injury.
2. The disc extends slightly over the sides of the drawer so you can grasp
it. Hold it gently and lift it out.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-13
Operating Basics
Removing a disc
3. Push the centre of the drawer to close it. Press gently until it locks into
place.
Buttons
The Internet button and the CD/DVD button can be assigned functions and
applications in the TOSHIBA Controls Properties.
1. Move mouse cursor and reach the top of desktop screen. The back
cards and white cards appear. Click "Button support" white card.
2. "Button Support" white card fully appears. After double click this card,
the dialog for changing button function is displayed.
3. Change function of Buttons. Or you can go to:
1. Start ꢀ All programs ꢀ TOSHIBA ꢀ Utilities ꢀ Toshiba Assist.
2. Choose optimize from left panel then select TOSHIBA Button
Controls.
TOSHIBA Button Support
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-14
Operating Basics
CD/DVD play control buttons
In addition to the power button, the following four buttons control functions
relating to the playback of optical media and digital audio data:
Play/Pause
Stop
Starts or pauses play
Stops play
Next
Advances to the next track, chapter or data
Returns to the previous track, chapter or data
Previous
If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.
TOSHIBA Disc Creator
Note the following limitations when you use TOSHIBA Disc Creator:
■ DVD-Video cannot be created using TOSHIBA Disc Creator.
■ DVD-Audio cannot be created using TOSHIBA Disc Creator.
■ You cannot use the TOSHIBA Disc Creator "Audio CD" function to
record music to the DVD-R/-RW or DVD+R/+RW media.
■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to
copy DVD-Video and DVD-ROM with copyright protection.
■ DVD-RAM media cannot be backed up with the "Disc Backup" function
of TOSHIBA Disc Creator.
■ You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or DVD+R/
+RW using the "Disc Backup" function of TOSHIBA Disc Creator.
■ You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/
+RW to CD-R/RW using TOSHIBA Disc Creator.
■ TOSHIBA Disc Creator cannot record in packet format.
■ You might not be able to use the "Disc Backup" function of TOSHIBA
Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was
made with other software on a different DVD-R/-RW or DVD+R/+RW
recorder.
■ If you add data to a DVD-R and DVD+R disc that you have already
recorded to, you might not be able to read the added data under some
circumstances. It cannot be read in 16-bit operating systems, such as
Windows 98SE and Windows ME, in Windows NT4 you will need
Service Pack 6 or later to read the data, and in Windows 2000 you will
need Service Pack 2 or later to read it. Some optical media drives
cannot read added data regardless of the operating system.
■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs.
To record to a DVD-RAM, use Explorer or other similar utility.
■ When you back up a DVD disc, be sure the source drive supports
recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive
does not support recording to DVD-R/-RW or DVD+R/+RW discs, it
might not be backed up correctly.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-15
Operating Basics
■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to
use the same type of disc.
■ You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Display the setting dialog box by one of the following two steps:
■ Click the setting button (
) for writing on the main toolbar in the
Data CD/DVD mode.
■ Select Setting for writing ꢀ Data CD/DVD in the Setting menu.
2. Mark the Verify written data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
Media Care
This section provides tips on protecting data stored on your discs and
disks.
Handle your media with care. The following simple precautions will
increase the lifetime of your media and protect the data stored on it:
1. Store your discs in the container they came in to protect them and keep
them clean.
2. Do not bend the disc.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the
disc that contains data.
4. Hold the disc by its outside edge or the edge on the center hole.
Fingerprints on the surface can prevent the drive from properly reading
data.
5. Do not expose to direct sunlight, or extreme heat or cold, and do not
place heavy objects on your discs.
6. If your discs become dusty or dirty, wipe them with a clean dry cloth.
Wipe from the center out, do not wipe in a circular direction around the
disc. If necessary, use a cloth dampened in water or a neutral cleaner.
Do not use benzine, thinner or similar cleaner.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-16
Operating Basics
Discs
1. Store your disks in the container they came in to protect them and keep
them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a
soft damp cloth.
2. Do not slide back the disk's protective metal covering or touch the disk's
magnetic surface. Fingerprints may prevent the disk drive from reading
data from the disk.
3. Data may be lost if the disk is twisted, bent, or exposed to direct
sunlight, or extreme heat or cold.
4. Do not place heavy objects on your disks.
5. Do not eat, smoke, or use erasers near your disks. Foreign particles
inside the disk's jacket can damage the magnetic surface.
6. Magnetic energy can destroy data on disks. Keep your disks away from
speakers, radios, television sets and other sources of magnetic fields.
TV-Out & HDMI
Use the TV-Out port to connect to a television. Be sure to use a 4 pin type
S-video cable. Use the HDMI port to connect to an HDTV. For more details,
see Appendix B.
TV Out Port
HDMI
Setting up more than one display
You can set up your computer to utilize more than one display, effectively
spreading a single desktop screen across two monitors.
The Display settings window allows you to adjust more precisely the
relative positioning of the two displays when they are configured as an
extended desktop. On the Display Settings window, the two displays can be
positioned horizontally, vertically or in any diagonal configuration you wish,
as shown below.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-17
Operating Basics
If an external display will not be connected next time you use your
computer, you should cancel any extended desktop or clone display
settings before shutting down your computer.
Clone display settings are those where more than one device has been
selected and is simultaneously applicable.
Cleaning the computer
To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.
■ Be careful not to spill liquids into the computer. If the computer does get
wet, turn the power off immediately and let the computer dry completely
before you turn it on again.
■ Clean the computer using a slightly damp (with water) cloth. You can
use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.
Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-18
Operating Basics
Moving the computer
The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.
■ Make sure all disk activity has ended before moving the computer.
Check the Built-in Hard Disk Drive and optical disc drive indicators
on the computer.
■ If a disk is in the disk drive, remove it.
■ If a disc is in the optical disc drive, remove it. Also make sure the optical
disc drive drawer is securely closed.
■ Turn off the power to the computer.
■ Disconnect all peripherals before moving the computer.
■ Close the display. Do not pick up the computer by its display panel or
back (where the interface ports are located).
■ Disconnect the AC adapter if it is connected.
■ Use the carrying case when transporting the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4-19
About the HD DVD
Chapter 5
About the HD DVD
This chapter describes the features, use of HD DVD and HD DVD Media.
HD DVD is provided with some models.
Summary
HD DVD allows users to enjoy video, concerts and other packaged content
by taking advantage of its large amount of storage space and high-quality
audio and video. HD DVD also allows for the storage of long video when
combined with the latest video compression technologies.
The storage capacity and data transfer rate of HD DVD is superior to
standard DVD, with two types of playback-only discs in single-sided single-
layer 15 GB and single-sided dual-layer 30 GB (Gigabyte) formats.
1. Unfinalized DVDs created on home DVD recorders may not be
playable on the computer.
2. When inserting an unfinalized DVD-R DL disc into the computer,
Windows Vista™ may automatically finalize the disc and prevent
further writing.
Important information on use
■ Because HD DVD is a new format there is a possibility of new features
being added at a later date. As such, it is important that the purchaser
understands that software and other updates may be necessary after
purchase. Please be sure to complete user registration in order to
receive timely product updates.
■ This product can play existing DVD and CD formats, however, playback
may not be possible with some software. This product cannot play
Blu-ray DISC™ format software.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1
About the HD DVD
■ HD DVD is a new standard which makes use of new technologies. As
such, there is a possibility of problems occurring related to connection,
compatibility or operation with some discs and other digital devices. The
HD DVD-ROM logo signifies that this drive complies with the HD DVD
physical standard, and does not signify compliance with the HD DVD
Video standard. This device does not support advanced features of the
HD DVD Video standard as defined by the DVD Forum, including
picture-in-picture and network download features. Screen movement
may not be smooth, and performance may be lowered with some
HD DVD content.
■ Playback of high bit rate content may cause frame dropping, audio
skipping or decrease in computer performance.
■ Viewing of HD DVD content on an external display requires an HDCP
capable HDMI™ or DVI input on the external display.
■ Make sure to connect the computer's AC adaptor when playing an
HD DVD.
■ CPU power is concentrated on HD DVD playback when playing an
HD DVD, so make sure to exit all other applications.
®
■ Dolby Digital audio enhancements are only supported by Microsoft
Windows operating system. Content with high sample rates of 48 kHz
or more are downsampled when output through either the built-in
speakers or headphone jack.
integrated into this device is required for uninterrupted enjoyment of
HD DVD. An Internet connection is required when renewing the key.
■ For more information on AACS keys, visit the AACS website
HD DVD Media
■ Like CD and DVD, HD DVD is divided into the read-only and
recordableformats listed below.
■ Some media cannot be used with this product. Be sure to thoroughly
read section DVD Super Multi drive supporting ±R Double Layer,
HD DVD-ROM drive or HD DVD-R drive of chapter 2 before using this
product.
■ HD DVD-Video: For video playback. Used to store movies and other
video.
■ HD DVD-ROM: Read-only media.
■ HD DVD-R: A recordable media which can be written to only once.
■ HD DVD (Twin format disc): Has both HD DVD and DVD recordable
layers.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2
About the HD DVD
Media Structures and Capacity
HD DVD
Recordable Surface
Recordable Layer Structure
HD DVD Recordable Layer Only 15 GB
HD DVD Recordable Layer Only 30 GB
Capacity
Single-sided Single-Layer
Single-sided Dual-Layer
Double-sided Single-Layer HD DVD Recordable Layer Only 30 GB
Double-sided Dual-Layer
HD DVD Recordable Layer Only 60 GB
HD DVD (Twin format disc)
Recordable Surface
Recordable Layer Structure
HD DVD Recordable Layer
DVD Recordable Layer
Capacity
Single-sided Dual-Layer
15 GB
4.7 GB
Using TOSHIBA HD DVD PLAYER to enjoy HD DVDs
HD DVD Playback Restrictions
HD DVD-ROM drive and HD DVD-R drive allow users to enjoy the strong
visuals of HD DVD-Video.
"TOSHIBA HD DVD PLAYER" software is provided for playback of
HD DVD-Video.
Important information on use
HD DVD Playback
■ HD DVD is a new standard which makes use of new technologies. As
such, there is a possibility of problems occurring related to connection,
compatibility or operation with some discs and other digital devices. The
HD DVD-ROM logo signifies that this drive complies with the HD DVD
physical standard, and does not signify compliance with the HD DVD
Video standard. This device might not support advanced features of the
HD DVD Video standard as defined by the DVD Forum, including
picture-in-picture and network download features. Screen movement
may not be smooth, and performance may be lowered with some
HD DVD content.
■ This device supports AACS (Advanced Access Content System) next-
generation copy protection technology. Renewal of the AACS key
integrated into this device is required for uninterrupted enjoyment of
HD DVD. An Internet connection is required when renewing the key.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-3
About the HD DVD
■ Because HD DVD playback operates according to programs built-into
the content, operation methods, operation screens, sound effects, icons
and other features may vary from disc to disc. For more information on
these items refer to instructions included with content or contact the
content manufacturers directly.
Important information on playing HD DVD Video discs
HD DVD Video discs
■ Please use "TOSHIBA HD DVD PLAYER" for HD DVD Video playback.
"Windows Media Player" and other commercially available software
cannot be used for HD DVD Video playback.
■ HD DVD Video playback may take several moments to begin.
■ When playing an HD DVD (Twin format disc), run it from the "TOSHIBA
HD DVD Launcher Menu".
When Using
■ Frame dropping, audio skipping or out of synch audio and video may
occur during playback of some HD DVD Video titles.
■ Close all other applications when using the "TOSHIBA HD DVD
PLAYER". Do not open any other applications or carry out any other
operations during HD DVD Video playback. Playback may stop or not
function properly in some situations.
■ If windows or icons of memory-resident programs flicker during
playback, maximize the "TOSHIBA HD DVD PLAYER" window.
■ Do not playback HD DVD discs Video while watching or recording
television programs using other applications. Doing so may cause
HD DVD Video playback or television program recording errors. In
addition, if pre-scheduled recording starts during HD DVD Video
playback it may cause HD DVD Video playback or television program
recording errors. Please view HD DVD Video during times when there
is no recording pre-scheduled.
■ The resume function cannot be used with some discs on the "TOSHIBA
HD DVD PLAYER".
■ Make sure to connect the computer's AC adaptor when using the
"TOSHIBA HD DVD PLAYER". Power-saving features may interfere
with smooth playback.
■ Set the "Power option" profile to "High Performance" when using the
"TOSHIBA HD DVD PLAYER".
■ Screen savers will not display while playing a movie in the "TOSHIBA
HD DVD PLAYER". The computer will also not go into Sleep Mode,
Hibernation Mode or shutdown while using "TOSHIBA HD DVD
PLAYER".
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-4
About the HD DVD
■ Do not configure the Display automatic power off function to run while
the "TOSHIBA HD DVD PLAYER" is running.
■ The Windows Aero function is disabled while the "TOSHIBA HD DVD
PLAYER" is running.
Display Devices & Audio
■ "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to
"Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor"
tab in the "Display Settings". To open the Display Settings, click Start ꢀ
Control Panel ꢀ Appearance and Personalization ꢀ
Personalization ꢀ Display Settings.
■ If the HD DVD Video image is not displayed on an external display or
television, stop the "TOSHIBA HD DVD PLAYER", and change the
screen resolution in "Resolution" on the "Monitor" tab in the "Display
Settings". However, video cannot be output to some external displays
and televisions due to output or playback conditions.
■ An HDCP compatible HDMI input is required on external displays or
televisions to view video being played in the "TOSHIBA HD DVD
PLAYER" on an external display or television.
■ When viewing on an external display or television, use an HDMI cable
to connect the external device to the HDMI out port and change the
display device before playing. The display device cannot be changed
during playback.
■ HD DVD Video can only be displayed on the computer's display panel
or televisions connected to the computer's HDMI out port. HD DVD
Video cannot be displayed on televisions connected to the S-Video
output connector or external displays connected to the RGB connector.
In addition, HD DVD Video cannot be displayed simultaneously (in
clone or Dualview modes) on the computer's display panel and an
external display or television.
■ Do not change the screen resolution while running the "TOSHIBA
HD DVD PLAYER".
■ Audio output through the S/PDIF cannot be recorded when playing an
HD DVD in the "TOSHIBA HD DVD PLAYER".
■ Audio data of more than 48 kHz/16 bit will be down sampled to
48 kHz/16 bit.
TOSHIBA HD DVD PLAYER
■ "TOSHIBA HD DVD PLAYER" software is supported for playback of
HD DVD Video, DVD-Video and DVD-VR.
■ The "TOSHIBA HD DVD PLAYER" does not have a parental control
function.
■ In order to protect copyrights, the Windows Print Screen function is
disabled when "TOSHIBA HD DVD PLAYER" is running.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-5
About the HD DVD
Print Screen functions are disabled even when running other applications
besides "TOSHIBA HD DVD PLAYER" and when "TOSHIBA HD DVD
PLAYER" is minimized.
Please close the "TOSHIBA HD DVD PLAYER" to use the Print Screen
function.
■ Carry out the installation/uninstallation of the "TOSHIBA HD DVD
PLAYER" under a user account with administrator rights.
■ Do not change Windows Users while "TOSHIBA HD DVD PLAYER" is
running.
■ Some HD DVD Video disc titles may return to the title before the
playback time (playback position) displayed in the control window
reaches the end time.
■ For some HD DVD Video discs, using the control window to change the
audio track will also change the subtitle track.
■ Periodic updates will be necessary to continue using the "TOSHIBA
HD DVD PLAYER".
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-6
About the HD DVD
Using TOSHIBA HD DVD PLAYER
Starting TOSHIBA HD DVD PLAYER
Use the following procedure to start "TOSHIBA HD DVD PLAYER".
1. Insert an HD DVD-Video in the HD DVD drive while Windows Vista™. is
running.
When an HD DVD-Video disc and an HD DVD (Twin format disc) are
set in the HD DVD drive, the following application selection screen may
appear.
If this occurs, select Play HD DVD movie or Run the HD DVD
Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER.
Application selection screen
2. Touch the CD/DVD panel on the Front operation panel. Or select
Start ꢀ All Programs ꢀ TOSHIBA HD DVD PLAYER to start
"TOSHIBA HD DVD PLAYER".
The TOSHIBA DVD PLAYER can also be started from the Media Center
top menu.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-7
About the HD DVD
Operating TOSHIBA HD DVD PLAYER
Important information on using "TOSHIBA HD DVD PLAYER".
■ The HD DVD standard defines A, B, C and D buttons, and some
software may display "Press the A button" or similar messages. If a
message of this type appears, use the following corresponding
keyboard keys.
■ A button: keyboard A key
■ B button: keyboard B key
■ C button: keyboard C key
■ D button: keyboard D key
■ Screen display and available features may vary amongst HD DVD-
Videos and scenes.
■ Only operation buttons (including remote controller and Front operation
panels) which correspond to currently available and active features will
be useable during HD DVD playback.
■ If the menu is opened in the Display Area using the Control window's
Top Menu or Menu buttons, touch pad and mouse menu operations
may not be able to be used.
Display Area
Help
Maximize
Setting
Minimize
Exit
TOSHIBA HD DVD PLAYER Control Window
TOSHIBA HD DVD PLAYER windows
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-8
About the HD DVD
Display Area
Maximize
Displays video. Double click on the Display Area to
toggle full screen display mode on and off. Click the
Display Area to display the Control window when it
isn't displayed.
Maximizes the window of TOSHIBA HD DVD
PLAYER.
Settings
Help
Displays the "Settings" screen.
Opens help.
Minimize
Minimizes the window of TOSHIBA HD DVD
PLAYER.
Exit
Closes TOSHIBA HD DVD PLAYER.
TOSHIBA HD
DVD PLAYER
Control window
The buttons on the panel are used to control
playback of HD DVD-Video discs. Click the Display
Area to display the Control window when it is
hidden. Please refer to the following "TOSHIBA
HD DVD PLAYER Control window" section for
more information.
Open TOSHIBA HD DVD PLAYER HELP
TOSHIBA HD DVD PLAYER features and instructions are also explained in
detail in "TOSHIBA HD DVD PLAYER Help".
Use the following procedure to open "TOSHIBA HD DVD PLAYER Help".
1. Click the "Help" button (
) in the Display Area.
TOSHIBA HD DVD PLAYER Control window
The following are the main buttons used when playing HD DVD-Video.
Please refer to Help for details on each button.
Buttons may not be able to be used on some titles, even if the button is
displayed.
Counter
Always on Top
Exit
Current position
Volume Control
Mute
Multi Audio
Channel Output
TOSHIBA HD DVD PLAYER Control window (1)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-9
About the HD DVD
Counter
Displays play time, title number and chapter
number during disc playback.
Always on top
Sets the control window as always on top, so that it
is not hidden by other windows or full screen
display.
Exit
Closes TOSHIBA HD DVD PLAYER.
Current position
Displays the current position within the title on the
bar icon.
Volume control
Mute
Adjusts the volume to the level selected by
dragging the slider bar.
Mutes the sound when clicked. Clicking when the
sound is muted returns the volume to the previous
level.
Multi Audio
Channel Output
Switches between available multi audio channel,
during playback of a DVD-VR. This function can be
used during playback of a DVD-VR only.
Eject
Previous Chapter Next Chapter
One-touch Replay
One-touch Skip
Stop
Fast Rewind
Play
Fast Forward
Pause
Slow Motion
TOSHIBA HD DVD PLAYER Control window (2)
Eject
Opens the disc tray.
Previous
Chapter
Jumps to the previous chapter.
Next Chapter
Jumps to the next chapter.
One-touch
Replay
Rewinds by a specified amount of time and
continues playback from that position.
One-touch Skip
Jumps forward by a specified amount of time and
continues playback from that position.
Stop
Stops a HD DVD currently being run.
Fast Rewind a HD DVD currently being run.
Plays an HD DVD.
Fast Rewind
Play
Fast Forward
Pause
Fast forwards a HD DVD currently being run.
Temporally stops a HD DVD currently being run.
Performs slow motion playback.
Slow Motion
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-10
About the HD DVD
TWIN Format Disc
TWIN Format Disc
(HD DVD selected)
Rewind
*1
*1
(DVD selected)
Rewind
Subtitle
Repeat
Sound
Angle Rewind
Top Menu
Title/Chapter
Search
Drive Specification
Menu
Return
TOSHIBA HD DVD PLAYER Control window (3)
Subtitle
Sound
Switches between available subtitles.
Switches between audio tracks for titles which have
more than 1 audio track.
Angle
Switches between angles for multi-angle
compatible titles.
Repeat
Switches between repeat chapter, repeat title and
normal playback modes.
Title/Chapter
Search
Searches for chapters or titles.
Drive
Specification
Specifies which drive to use when an external
HD DVD drive is connected.
Top Menu
Menu
Displays the HD DVD Top Menu.
Displays the HD DVD Menu.
Return
Displays the HD DVD title selection screen.
TWIN Format
Disc (HD DVD
selected)
Reads the HD DVD layer of the HD DVD (Twin
format disc). Click DVD button to switch to the DVD
layer.
*1
TWIN Format
Disc (DVD
selected)
Reads the DVD layer of the HD DVD (Twin format
disc). Click HD DVD button to switch to the
HD DVD layer.
*1
*1: Displayed when an HD DVD (Twin format disc) is placed in the optical
disc drive.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-11
About the HD DVD
Using the Computer in place of an HD DVD Player
Videos played using "TOSHIBA HD DVD PLAYER" included with the
computer can be displayed on a television equipped with an HDMI input
port.
HD DVD-Video can only be displayed on the computer's display panel or
on a television connected to the HDMI out port. HD DVD-Video cannot be
displayed on televisions connected to the S-Video out port or external
displays connected to the RGB connector.
Before Connecting
Please refer to the television's user manual as well as this chapter when
connecting the computer to a television.
■ Televisions Which Can Be Connected to the Computer.
Televisions which are equipped with an HDMI input port can be
connected to the computer.
Please use a commercially available HDMI cable to connect the
television and computer.
Not all televisions equipped with an HDMI input port have been tested
for compatibility with this product. As such, Toshiba cannot guarantee
that HD DVD-Video content can be displayed on all televisions
equipped with an HDMI input port. HD DVD-Video content may not
display properly on some televisions.
Connecting to the Computer
Turn off the television and computer before connecting.
1. Insert the HDMI cable plug into the HDMI out port on the computer.
HDMI out port
Connecting the HDMI out port
2. Insert the remaining HDMI cable plug into the HDMI input port on the
television.
3. Turn on the television first, and then the computer. Audio will be output
from both the television and the computer. The volume dial or Fn + ESC
keys can be used to mute the computer audio. The volume level for
both the television and computer can be adjusted using the WAVE item
in "Volume Control".
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-12
About the HD DVD
Switching between Computer and Television Display
The following method can be used to display HD DVD-Video. The display
method can be changed by changing the display device setting.
Configure the following settings to display HD DVD-Video on the
television. If the following settings are not configured, HD DVD-Video will
not be displayed on the television.
Notes on Operation
■ Change the display device setting before playing HD DVD-Video. Do
not change the display device while playing HD DVD-Video.
■ Do not change the display device at the following times.
■ When reading or writing data
■ When carrying out communications operations
■ HD DVD-Video cannot be played when using Clone or Dualview
(extended desktop) displays modes. Set either the computer's display
panel or the television as the sole display device.
The display device setting can be changed using the Fn + F5 keys.
When you press these hot keys, a dialog box appears. Only selectable
devices will be displayed. Hold down Fn and press F5 again to change the
device. When you release Fn and F5, the selected device will change. If
you hold down these hot keys for five seconds the selection will return to
the computer’s display panel.
HD DVD-R Disc writing Software (depending on the model
you purchased)
®
Ulead DVD MovieFactory for TOSHIBA and TOSHIBA Disc Creator are
included with this computer for writing HD DVD-R discs.
Ulead DVD MovieFactory can be used to write files in video format.
TOSHIBA Disc Creator can be used to write data. Refer to the manuals or
help files included with the software for detailed usage instructions.
Methods for accessing the manuals and help files for the software are as
follows.
■ Opening the Ulead DVD MovieFactory Software Start ꢀ
All Programs ꢀ DVD MovieFactory for TOSHIBA ꢀ Ulead DVD
MovieFactory for TOSHIBA Launcher
■ Opening the Ulead DVD MovieFactory Manual Start ꢀ
All Programs ꢀ DVD MovieFactory for TOSHIBA ꢀ User Manual ꢀ
DVD MovieFactory User Manual
■ Opening the TOSHIBA Disc Creator Software Start ꢀ All Programs ꢀ
CD&DVD Applications ꢀ Disc Creator
■ Opening the TOSHIBA Disc Creator Manual Start ꢀ All Programs ꢀ
CD&DVD Applications ꢀ Disc Creator Help
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-13
About the HD DVD
Display Compatibility
Only the computer's display panel supports display with high definition
processing. When displaying on a television connected to the computer the
display on the television will only be ordinary display and not display with
high definition processing. The following is an HD DVD-Video display
compatibility list.
■ O: The display of TOSHIBA HD DVD PLAYER is possible.
■ X: The display of TOSHIBA HD DVD PLAYER is impossible.
When using TOSHIBA HD DVD
PLAYER
Computer's Display Panel
Television*
O
O
O
X
External Display*
Simultaneous Display
* Can only display on devices equipped with an HDMI port.
Writing CDs/DVDs on a DVD Super Multi drive or
HD DVD-ROM drive supporting double layer disc recording
You can use the DVD Super Multi drive or HD DVD drive to write data to
either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following
applications for writing are preinstalled:
®
TOSHIBA Disc Creator or Ulead DVD MovieFactory for TOSHIBA, which
is a product of Ulead Systems, Inc.
Important message
Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM
media, read and follow all set-up and operating instructions in this section.
If you fail to do so, the DVD Super Multi drive or HD DVD drive may not
function properly, and you may fail to write or rewrite, lose data or incur
other damage.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may
be caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/RW or DVD-
R/-RW/+R/+RW /-RAM media that may be caused by writing or
rewriting with this product, or for any business profit loss or business
interruption that may be caused by the change or loss of the recorded
contents.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-14
About the HD DVD
■ Damage that may be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. Also, it is a good idea to make two or
more copies of important data, in case of undesired change or loss of the
recorded contents.
Before writing or rewriting
Please observe the following points when you write or rewrite data.
■ Based on TOSHIBA's limited compatibility testing, we suggest the
following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM
media. However, in no event does TOSHIBA guarantee the operation,
quality or performance of any disc. Disc quality can affect write or
rewrite success rates.
CD-R:
TAIYOYUDEN CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
Hitachi Maxell Ltd.
CD-RW:
DVD-R:
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD Specifications for Recordable Disc for
General Version 2.0
TAIYOYUDEN CO., LTD.
Matsushita Electric Industrial Co., Ltd.
DVD-RW:
DVD Specifications for Re-recordable Disc for
Version 1.1 or Version 1.2
VICTOR COMPANY OF JAPAN, LIMITED.
MITSUBISHI KAGAKU MEDIA CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD+R:
DVD+RW:
*DVD-RAM
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD Specifications for DVD-RAM Disc for
Version 2.0, Version 2.1 or Version 2.2
Matsushita Electric Industrial Co., Ltd.
Hitachi Maxell Ltd.
* DVD Multi drive, DVD Super Multi, and HD DVD
drive can use DVD-RAM.
DVD+R
MITSUBISHI KAGAKU MEDIA CO., LTD.
(Double Layer)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-15
About the HD DVD
DVD-R
MITSUBISHI KAGAKU MEDIA CO., LTD.
(Dual Layer)
DVD-R
Labelflash™
FUJIFILM Corporation.
FUJIFILM Corporation.
DVD+R
Labelflash™
■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors
may occur. Be careful to check the disc for dirt or damage before you
use it.
■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is
affected by the quality of the disc and the way it is used.
■ There are two types of DVD-R: authoring and general use discs. Do not
use authoring discs. Only general use discs can be written to by a
computer drive.
■ We can support only Format 1 of DVD-R DL. Therefore you can not do
the additional writing. If your data is under DVD-R (SL) capacity, we
suggest to use DVD-R (SL) media.
■ You can use DVD-RAM discs that can be removed from a cartridge and
DVD-RAM discs designed without a cartridge. You cannot use a disc
with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.
■ Other DVD-ROM drives for computers or other DVD players may not be
able to read DVD-R/+R/-RW/+RW/-RAM discs.
■ Data written to a CD-R/DVD-R/+R disc cannot be deleted either in
whole or in part.
■ Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc
cannot be recovered. Check the content of the disc carefully before you
delete it. If multiple drives that can write data to discs are connected, be
careful not to delete data from the wrong drive.
■ In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required
for file management, so you may not be able to write the full capacity of
the disc.
■ Since the disc is based on the DVD-R/-RW standard, it will be filled with
dummy data if the written data is less than about 1 GB. Even if you write
only a small amount of data, it might take time to fill in the dummy data.
■ Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data
and video. Use a video disc to store video data. You can use video
discs on a DVD recorder as well as on your computer's DVD-ROM
drive. You cannot use data discs on a DVD recorder.
■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
■ When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
■ Be sure to connect the universal AC adapter before you write or rewrite.
■ Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-16
About the HD DVD
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■ Operate the computer at full power. Do not use power-saving features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance hard
disk access speed, as they may cause unstable operation and damage
data.
■ Write from the computer's hard disk drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD
®
MovieFactory for TOSHIBA has not been confirmed. Therefore,
operation with other software cannot be guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-
R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
■ Do not perform any of the following actions when writing or rewriting:
■ Change users in the Windows Vista™ operating system.
■ Operate the computer for any other function, including using a
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD
panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the computer.
■ Install, remove or connect external devices such as USB devices,
an external display, i.Link devices or optical digital devices.
■ Use the audio/video control button to reproduce music or voice.
■ Open the drive.
■ Do not use shut down/log off and Sleep/Hibernation while writing or
rewriting.
■ Make sure writing or rewriting is completed before going into
Sleep/hibernation. Writing is completed if you can open the drive tray.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
■ Always copy data from the hard disk drive to the CD. Do not use cut-
and-paste as the original data will be lost if there is a write error.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-17
About the HD DVD
How to make a Labelflash™ DVD
Simplified steps for making a Labelflash™ DVD:
1. Insert a Labelflash™ disc in DVD drive.
Set printable surface for underside.
2. Click Start ꢀ All Programs ꢀ DVD MovieFactory for TOSHIBA ꢀ
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
3. Click Print Disc Label ꢀ Label Printing. Ulead Label@Onece is
started.
4. Click the General tab.
5. Choose DVD Drive for Printer. e.g. <E:> PIONEER DVD…
6. Add and customize the look of your images and text.
7. Click Labelflash™ setting and choose Draw Quality.
8. Click Print.
The availability of Labelflash™ function depends on the model you
purchased.
Writing CDs/DVDs/HD DVDs on a HD DVD-R drive (depending
on the model you purchased)
You can use the HD DVD-R drive to write data to either CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM or HD DVD-R discs. The following applications
for writing are preinstalled:
®
TOSHIBA Disc Creator or Ulead DVD MovieFactory for TOSHIBA, which
is a product of Ulead Systems, Inc.
Important message
Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or
HD DVD-R media, read and follow all set-up and operating instructions in
this section. If you fail to do so, the HD DVD-R drive may not function
properly, and you may fail to write or rewrite, lose data or incur other
damage.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM or HD DVD-R
disc that may be caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/RW or DVD-
R/-RW/+R/+RW /-RAM or HD DVD-R media that may be caused by
writing or rewriting with this product, or for any business profit loss or
business interruption that may be caused by the change or loss of the
recorded contents.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-18
About the HD DVD
■ Damage that may be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. Also, it is a good idea to make two or
more copies of important data, in case of undesired change or loss of the
recorded contents.
Before writing or rewriting
Please observe the following points when you write or rewrite data.
■ Based on TOSHIBA's limited compatibility testing, we suggest the
following manufacturers of CD-R/RW, DVD-R/+R/-RW/+RW/-RAM and
HD DVD-R media. However, in no event does TOSHIBA guarantee the
operation, quality or performance of any disc. Disc quality can affect
write or rewrite success rates.
CD-R:
TAIYOYUDEN CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
Hitachi Maxell Ltd.
CD-RW:
DVD-R:
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD Specifications for Recordable Disc for
General Version 2.0
TAIYOYUDEN CO., LTD.
Matsushita Electric Industrial Co., Ltd.
DVD-RW:
DVD Specifications for Re-recordable Disc for
Version 1.1 or Version 1.2
VICTOR COMPANY OF JAPAN, LIMITED.
MITSUBISHI KAGAKU MEDIA CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD+R:
DVD+RW:
*DVD-RAM
MITSUBISHI KAGAKU MEDIA CO., LTD.
RICOH Co., Ltd.
DVD Specifications for DVD-RAM Disc for
Version 2.0, Version 2.1 or Version 2.2
Matsushita Electric Industrial Co., Ltd.
Hitachi Maxell Ltd.
*DVD Multi drive and DVD Super Multi can use
DVD-RAM.
DVD+R
MITSUBISHI KAGAKU MEDIA CO., LTD.
(Double Layer)
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-19
About the HD DVD
DVD-R
MITSUBISHI KAGAKU MEDIA CO., LTD.
(Dual Layer)
HD DVD-R
Hitachi Maxell Ltd.
(Single Layer)
MITSUBISHI KAGAKU MEDIA CO., LTD.
MITSUBISHI KAGAKU MEDIA CO., LTD.
HD DVD-R
(Dual Layer)
■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors
may occur. Be careful to check the disc for dirt or damage before you
use it.
■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM or
HD DVD-R is affected by the quality of the disc and the way it is used.
■ There are two types of DVD-R: authoring and general use discs. Do not
use authoring discs. Only general use discs can be written to by a
computer drive.
■ We can support only Format 1 of DVD-R DL. Therefore you can not do
the additional writing. If your data is under DVD-R (SL) capacity, we
suggest to use DVD-R (SL) media.
■ You can use DVD-RAM discs that can be removed from a cartridge and
DVD-RAM discs designed without a cartridge. You cannot use a disc
with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.
■ Other DVD-ROM drives for computers or other DVD players may not be
able to read DVD-R/+R/-RW/+RW/-RAM discs.
■ Data written to a CD-R/DVD-R/+R disc cannot be deleted either in
whole or in part.
■ Data deleted (erased) from a CD-RW and DVD-RW/+RW/-RAM disc
cannot be recovered. Check the content of the disc carefully before you
delete it. If multiple drives that can write data to discs are connected, be
careful not to delete data from the wrong drive.
■ In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required
for file management, so you may not be able to write the full capacity of
the disc.
■ Since the disc is based on the DVD-R/-RW standard, it will be filled with
dummy data if the written data is less than about 1 GB. Even if you write
only a small amount of data, it might take time to fill in the dummy data.
■ Two types of DVD-R/+R/-RW/+RW/-RAM discs are on the market: data
and video. Use a video disc to store video data. You can use video
discs on a DVD recorder as well as on your computer's DVD-ROM
drive. You cannot use data discs on a DVD recorder.
■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000
without DVD-RAM Driver Software.
■ When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
■ Be sure to connect the universal AC adapter before you write or rewrite.
■ Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-20
About the HD DVD
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■ Operate the computer at full power. Do not use power-saving features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance hard
disk access speed, as they may cause unstable operation and damage
data.
■ Write from the computer's hard disk drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD
®
MovieFactory for TOSHIBA has not been confirmed. Therefore,
operation with other software cannot be guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-
R/RW, DVD-R/-RW/-RAM or DVD+R/+RW or HD DVD-R disc.
■ Do not perform any of the following actions when writing or rewriting:
■ Change users in the Windows Vista™ operating system.
■ Operate the computer for any other function, including using a
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD
panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the computer.
■ Install, remove or connect external devices such as USB devices,
an external display, i.Link devices or optical digital devices.
■ Use the audio/video control button to reproduce music or voice.
■ Open the drive.
■ Do not use shut down/log off and Sleep/Hibernation while writing or
rewriting.
■ Make sure writing or rewriting is completed before going into
Sleep/hibernation. Writing is completed if you can open the drive tray.
■ Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.
■ Always copy data from the hard disk drive to the CD. Do not use cut-
and-paste as the original data will be lost if there is a write error.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-21
About the HD DVD
When Using Ulead DVD MovieFactory® for TOSHIBA
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click Start ꢀ All Programs ꢀ DVD MovieFactory for TOSHIBA ꢀ
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc ꢀ Burn Video to Disc to launch Direct Recording
dialog box, choose DVD-Video/+VR to invoke Straight Capture to
Disc Page.
4. Choose DVD-Video format.
5. Confirm the capture source is DV.
6. Press Capture button.
Simplified steps for making a DVD-Video from adding a video source:
1. Click Start ꢀ All Programs ꢀ DVD MovieFactory for TOSHIBA ꢀ
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
nd
2. Click Video Disc ꢀ New Project to invoke 2 Launcher, choose your
project type, then invoke DVD MovieFactory.
3. Add source from HD Disk by click Add Video files button to invoke
browser dialog box.
4. Choose the sourse video then go to the Next page to apply Menu.
5. After choose the menu template, press Next button to go to Burning
Page.
6. Choose the output type then press Burn button.
How to learn more about Ulead DVD MovieFactory®
Please refer to the Help and Manul file for additional Ulead DVD
MovieFactory information.
Important information for use
Note the following limitations when you write video DVD:
1. Editing digital video
■ Log in with Administrator rights to use DVD MovieFactory.
■ Make sure that your computer is running on AC power when using DVD
MovieFactory.
■ Operate the computer at Full Power. Do not use power-saving features.
■ While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display properly.
■ DVD MovieFactory cannot edit or play copy protected content.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-22
About the HD DVD
■ Do not enter Sleep/Hibernation Mode while using DVD MovieFactory.
■ Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■ When recording to a DV-Camcorder, to ensure you capture all of your
data, let the camcorder record for a few seconds before you begin
recording your actual data.
■ CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
■ While recording video to DVD or tape, please close all other programs.
■ Do not run software like a screen saver because it can put a heavy load
on the CPU.
■ Do not support MP3 decode and encode.
2. Before recording the video to DVD
■ When you record to DVD disc, please use only discs recommended by
the Drive manufacturer.
■ Do not set the working drive to a slow device like a USB 1.1 hard disk
drive or it will fail to write DVD.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including using a
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD
panel.
■ Bump or cause vibration to the computer.
■ Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■ Open the DVD drive.
■ Install, remove or connect external devices, including the following:
SD card, USB devices, external display, i.LINK. devices, optical
digital devices.
■ Please verify your disc after recording important data.
■ DVD-R/+R/-RW disc cannot be written in VR format.
■ Not support to output VCD or SVCD format.
3. About Straight to Disc
■ Not support to record on DVD-R/+R disc.
■ Not support to record DVD+VR format by HDV.
■ HDV support to burn DVD-Video only.
■ DVD-VR format not support to add Menu.
4. About recorded DVDs
■ Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/+R/-RW/-RAM discs.
■ When playing your recorded disc on your computer, please use the
DVD Video Player.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5-23
The Keyboard
Chapter 6
The Keyboard
The computer's keyboard layouts are compatible with a 104/105-key
enhanced keyboard. By pressing some keys in combination, all the
104/105-key keyboard functions can be executed on the computer.
The number of keys on your keyboard depends on which country/region's
keyboard layout your computer is configured with. Keyboards for numerous
languages are available.
There are five types of keys: typewriter keys, numeric keys, function keys,
soft keys and cursor control keys.
Typewriter keys
The typewriter keys, produce the upper- and lower-case letters, numbers,
punctuation marks, and special symbols that appear on the screen.
There are some differences, however, between using a typewriter and
using a computer keyboard:
■ Letters and numbers produced in computer text vary in width. Spaces,
which are created by a space character may also vary depending on
line justification and other factors.
■ The lowercase l (el) and the number 1 (one) are not interchangeable on
computers as they are on a typewriter.
■ The uppercase O (oh) and the 0 (zero) are not interchangeable.
■ The Caps Lock function key locks only the alphabetic characters in
uppercase while the shift lock on a typewriter places all keys in the
shifted position.
■ The Shift keys, the Tab key, and the Back Space key perform the
same function as their typewriter counterparts but also have special
computer functions.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-1
The Keyboard
F1 … F12 function keys
The function keys, not to be confused with Fn, are the 12 keys at the top of
your keyboard. These keys are dark gray, but function differently from the
other dark gray keys.
F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn key,
keys marked with icons execute specific functions on the computer. See
the section, Soft keys: Fn key combinations, in this chapter. The function
executed by individual keys depends on the software you are using.
Soft keys: Fn key combinations
The Fn (function) is unique to TOSHIBA computers and is used in
combination with other keys to form soft keys. Soft keys are key
combinations that enable, disable or configure specific features.
Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Sleep feature.
Emulation keys
Your software may require you to use keys that the keyboard does not
have. Pressing the Fn key and one of the following keys simulates the
enhanced keyboard's functions.
Press Fn + Enter to simulate Enter on the enhanced keyboard's numeric
keypad.
Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-2
The Keyboard
Hotkeys
Fn + ESC
Volume Mute – Turns the volume on and off.
Fn + F1
Instant Security – Enters screen saver mode and
blanks the screen. To restore your desktop, press
any key or use the TouchPad/Dual Mode Pad.
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Power Save Modes – Displays the power save
modes and lets you change the power settings
Sleep – This hot key switches the system to
Sleep mode.
Hibernate – This hot key switches the system to
Hibernate mode.
Display Selection – Changes displays.
Default resolution for simultaneous mode is set to WXGA+ (1440 × 900). If
you connect an RGB (Monitor) that is not WXGA+, change it in "Control
Panel/Personalization/Display settings".
Fn + F6
Fn + F7
Fn + F8
Brightness Down
Brightness Up
Wireless Device Controls – Pressing this hot
key allows you to switch between active wireless
devices if the wireless communication switch is
switched on.
Fn + F9
TouchPad/Dual Mode Pad On/Off
Fn + Space
Change Resolution – Cycles sequentially from
the current resolution to 800 × 600 to 1024 × 768
and back again to the original resolution.
Zoom Out – To reduce the icon size on the
desktop or the application window, press the 1 key
while holding down the Fn key.
Fn + 1
Zoom In – To enlarge the icon size on the
desktop or the application window, press the 2 key
while holding down the Fn key.
Fn + 2
Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming
Utility. Please be aware that this 'zooming' function is only available within
Microsoft Internet Explorer, Microsoft Office, Windows Media Player and
Adobe Reader, and for the icons on the desktop.
User’s Manual
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
The Keyboard
Windows special keys
The keyboard provides two keys that have special functions in Windows
Vista. One activates the Start menu and the other has the same function as
the secondary mouse button.
This key activates the Windows Vista™ Start menu
This key has the same function as the Right mouse button.
Number Pad
The number pad is activated by pressing the Num Lock key, the LED will
appear when active. Use the keypad to type numbers and generate ASCII
charcters.
Generating ASCII characters
Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII codes.
With the Num lock on:
1. Hold down Alt.
2. Using the number pad keys, type the ASCII code.
3. Release Alt, and the ASCII character appears on the display screen.
With the Num Lock off:
1. Hold Alt + Fn.
2. Using the number pad keys, type the ASCII code.
3. Release Alt + Fn, and the ASCII character appears on the display
screen.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6-4
Power and Power-Up Modes
Chapter 7
Power and Power-Up Modes
The computer's power resources include the AC adapter and internal
batteries. This chapter gives details on making the most effective use of
these resources including charging and changing batteries, tips for saving
battery power, and power up modes.
Power conditions
The computer's operating capability and battery charge status are affected
by the power conditions: whether an AC adapter is connected, whether a
battery is installed and what the charge level is for the battery.
Power on
Power off (no operation)
AC adapter Battery fully
• Operates
• No charge
connected
charged
• No charge
• LED: Battery blue
DC IN blue
• LED: Battery blue
DC IN blue
Battery partially • Operates
• Charge
charged
• Charge
• LED: Battery Amber
DC IN blue
• LED: Battery Amber
DC IN blue
• Operates
No battery
installed or no
charge
• No charge
• No charge
• LED: Battery off
DC IN blue
• LED: Battery off
DC IN blue
User’s Manual
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Power and Power-Up Modes
Power on
Power off (no operation)
AC adapter Battery capacity • Operates
notconnected is above low
• LED: Battery off
battery trigger
point
DC IN off
Battery capacity • Operates
is below low
• Alarm sounds (this
function depends on how
the computer is
battery trigger
point
configured)
• LED: Battery flashes
Amber
DC IN off
Battery capacity Computer goes into
exhausted
Hibernation or shuts down
(depending on the
TOSHIBA Power Saver
setting)
No battery
installed
• No operation
• LED: Battery off
DC IN off
* The LED is dependent on the model you purchased.
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators alert
you to the computer's operating capability and battery charge status
Battery indicator
Check the Battery indicator to determine the status of the battery. The
following indicator lights indicate the battery status.
Flashing Amber
The battery charge is low. The AC adapter must
be connected to recharge the battery
Amber
Indicates the AC adapter is connected and is
charging the battery.
Blue
Indicates the AC adapter is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does
not light.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-2
Power and Power-Up Modes
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adapter connected:
Blue
Indicates the AC adapter is connected and is
correctly supplying power to the computer.
No light
Indicates the AC adapter is not connected.
Power indicator
Check the Power indicator to determine the power status with the AC
adapter connected:
Blue
Indicates power is being supplied and the
computer is turned on.
Power indicator is located inside of the Power
Button (depending the model you purchased)
and in the front of the computer.
Blinking Amber
No light
Indicates power is being supplied to the
computer while the computer is in Sleep mode.
Under any other conditions, the indicator does
not light.
Battery types
The computer has two types of batteries:
■ Battery pack
■ Real Time Clock (RTC) battery
Battery pack
When the AC adapter is not connected, the computer's main power source
is a removable lithium ion battery pack, also referred to in this manual as
the battery.
You can purchase additional battery packs for extended use of the
computer away from an AC power source.
The battery is a disposable item. When its operation becomes short even
when fully charged, replace it with a new one.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-3
Power and Power-Up Modes
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not remove the battery pack while the computer is in Sleep Mode. In
this mode data is stored in memory, so if the computer loses power, it
will be lost.
■ Battery type: 6 cell-PA3536U-1BRS,PA3536U-1BAS
* The availability of this battery is dependent on the model you purchased.
Real Time Clock battery
The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this
data and the real time clock and calendar stop working. The following
message appears when you turn on the power:
ERROR 0271:Check date and time settings.
WARNING 0251:System CMOS checksum bad - Default
configuration used.
Press <F1> to resume, <F2> to Setup.
The computer's RTC battery is a lithium battery and should be replaced
only by your dealer or by a TOSHIBA service representative. The battery
can explode if not properly replaced, used, handled or disposed of.
Dispose of the battery as required by local ordinances or regulations.
When this error appears, the following action is recommended.
1. Connect the AC adapter and let the battery charge for 24-hours.
2. Press F2 to enter BIOS setup menu.
3. Set correct time and date.
If you still see the error message after performing the above actions,
please contact your TOSHIBA service representative.
Care and use of the battery pack
The battery pack is a vital component of portable computing. Taking proper
care of it will help ensure longer operating time on battery power as well as
a longer life for your battery pack. Follow the instructions in this section
carefully to ensure safe operation and maximum performance.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-4
Power and Power-Up Modes
Safety precautions
Mishandling of batteries can cause death, serious injury or property
damage.
Carefully observe the following advice:
Danger: Indicates an imminently hazardous situation, which could result in
death or serious injury, if you do not follow instructions.
Warning: Indicates a potentially hazardous situation, which could result in
death or serious injury, if you do not follow instructions.
Caution: Indicates a potentially hazardous situation, which if not avoided,
may result in moderate or minor injury or property damage.
Note: Provides important information.
Danger
1. Never try to dispose of the battery pack by burning or expose it to a
heating device such as a microwave oven. The battery pack could
explode and cause bodily injury.
2. Never try to disassemble, repair or otherwise tamper with a battery
pack. The battery pack will overheat and ignite. Leakage of caustic
alkaline solution or other electrolytic substances will cause fire or injury,
possibly resulting in death or serious injury.
3. Never short-circuit the battery pack by contacting the terminals with a
metal object. A short-circuit can cause fire or otherwise damage the
battery pack and possibly cause injury. To avoid accidental short-circuit,
always wrap the battery pack in plastic and cover the terminals with
electrical tape when storing or disposing of the battery pack.
4. Never puncture the battery pack with a nail or other sharp object. Never
strike it with a hammer or other object. Never step on it.
5. Never try to charge the battery pack in any manner other than that
described in the user's manual. Never connect the battery pack to a
plug socket or to an automobile's cigarette lighter socket. It may rupture
or ignite.
6. Use only the battery pack supplied with the computer or other device or
an battery pack approved by the computer or device's manufacturer.
Battery packs have different voltages and terminal polarities. Use of an
improper battery could cause smoke, fire or rupture of the battery pack.
7. Never subject a battery pack to heat, such as storage near a heat
source. Exposure to heat can cause the battery pack to ignite, explode
or leak caustic liquid and cause death or serious injury. It could also fail
or malfunction causing data loss.
8. Never expose the battery pack to abnormal shock, vibration or
pressure. The battery pack's internal protective device will fail, causing
it to overheat, explode, ignite or leak caustic liquids possibly resulting in
death or serious injury.
9. Never let a battery pack become wet. A wet battery pack will overheat,
ignite or rupture possibly resulting in death or serious injury.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5
Power and Power-Up Modes
Warning
1. Never allow caustic electrolyte fluid leaked from a battery pack to
contact your eyes, skin or clothing. If caustic electrolyte fluid should
contact your eyes, immediately wash your eyes with large amounts of
running water and seek medical attention, to help prevent eye damage.
It electrolyte fluid should contact your skin, immediately wash it under
running water to prevent rash. If it contacts your clothes, promptly
remove them to prevent the fluid from contacting your skin or eyes.
2. Immediately turn off the power, disconnect the AC adapter and remove
the battery if any of the following events are observed in the battery
pack: offensive or unusual odor, excessive heat, discoloration or
deformation. Never use the computer again until it has been checked
by a TOSHIBA service provider. It might generate smoke or fire, or the
battery pack might rupture.
3. Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.
4. Keep the battery pack out or reach of infants and children. It can cause
injury.
Caution
1. Never continue to use a battery pack after its recharging capacity has
become impaired, or after the display of a warning message indicating
that the battery pack's power is exhausted. Continued use of an
exhausted or impaired battery pack could cause the loss of data.
2. Never dispose of battery packs with normal trash. Bring them to your
TOSHIBA dealer or to another recycling centre to save resources and
prevent environmental damage. Cover the terminals with electrical tape
to prevent short-circuits, which could cause the battery pack to ignite or
rupture.
3. Use only battery packs recommended by TOSHIBA as replacements.
4. Always make sure the battery pack is installed correctly and securely.
Otherwise, a battery pack could fall out and possibly cause injury.
5. Charge the battery pack only in an ambient temperature between 5 and
30 degrees Celsius. Otherwise, the electrolyte solution might leak,
battery pack performance might deteriorate and the battery life might be
shortened.
6. Be sure to monitor the remaining battery power. If the battery pack or
real time clock battery discharge completely, Sleep Mode will not
function, and data in memory will be lost, and the computer might
register an incorrect time and date. In this case, connect the AC adapter
to recharge the batteries.
7. Never install or remove the battery pack without first turning off the
power and disconnecting the AC adapter. Never remove the battery
pack while the computer is in Sleep Mode as data will be lost.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-6
Power and Power-Up Modes
Note
1. Never remove the battery pack while the Wake-up on LAN function is
enabled. Data will be lost. Before you remove a battery pack, disable
the Wake-up on LAN function.
2. To ensure the battery pack maintains maximum capacity, operate the
computer on battery power once a week until the battery pack is fully
discharged. Refer to the section Extending battery life in this chapter for
procedures. If the computer is continuously operated on AC power for
an extended period, more than a week, the battery might fail to retain a
charge. It might not function efficiently over the expected life of the
battery pack and the Battery indicator might not indicate a low-battery
condition.
3. After the battery pack is charged, avoid leaving the AC adapter
connected and the computer turned off for more than a few hours at a
time. Continuing to charge a fully charged battery pack can damage the
battery.
Charging the batteries
When the power in the battery pack becomes low, the Battery indicator
flashes amber indicating that only a few minutes of battery power remain. If
you continue to use the computer while the Battery indicator flashes, the
computer enables Hibernation mode (so you don't lose data) and
automatically turns off.
You must recharge a battery pack when it becomes discharged.
Procedures
To recharge a battery pack while it is installed in the computer, connect the
AC adapter to the DC IN socket and plug the other end into a working
outlet.
The Battery indicator glows amber when the battery is being charged.
Use only the computer connected to an AC power source to charge the
battery pack. Do not attempt to charge the battery pack with any other
charger.
Time
The following table shows the time required to fully charge a discharged
battery.
Charging time (hours)
Battery type
Battery pack
RTC battery
Power on
Power off
about 12 or longer
about 24
about 4 or longer
about 24 with AC or
Battery pack
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-7
Power and Power-Up Modes
The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer.
If you make heavy use of external devices the battery might scarcely
charge at all during operation. Refer also to the section Maximizing battery
operating time.
Battery charging notice
The battery may not charge right away under the following conditions:
■ The battery is extremely hot or cold. To make sure the battery charges
to its full capacity, charge the battery at room temperature of 10°C to
30°C (50°F to 86°F).
■ The battery is nearly completely discharged. Leave the AC adapter
connected for a few minutes and the battery should begin charging.
Once a battery pack is fully charged, it is recommended that you operate
the computer only on battery power until the battery pack completely
discharges. Doing so extends battery life and helps ensure accurate
monitoring of battery capacity.
The Battery indicator may show a rapid decrease in battery operating time
when you try to charge a battery under the following conditions:
■ The battery has not been used for a long time.
■ The battery has completely discharged and been left in the computer for
a long time.
■ A cool battery is installed in a warm computer.
In such case, follow the steps below.
1. Fully discharge the battery by leaving it in the computer with the power
on until the power automatically shuts off.
2. Plug in the AC adapter.
3. Charge the battery until the Battery indicator glows blue (depending the
model you purchased).
Repeat these steps two or three times until the battery recovers normal
capacity.
Leaving the AC adapter connected will shorten battery life. At least once a
week, run the computer on battery power until the battery is fully
discharged, then recharge the battery.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-8
Power and Power-Up Modes
Monitoring battery capacity
Remaining battery power can be monitored using the following methods.
■ Clicking the battery icon on the task bar
■ Via the Battery Stats in the Windows Mobility Center Window
■ You should wait at least 16 seconds after turning on the computer
before trying to monitor the remaining operating time. This is because
the computer needs this time to check the battery’s remaining capacity
and then calculate the remaining operating time, based on this together
with the current power consumption.
■ Please be aware that the actual remaining operation time may differ
slightly from the calculated time.
With repeated discharges and recharges, the battery's capacity will
gradually decrease. In view of this it will be noted that an often used, older
battery will not operate for as long as a new battery even when both are
fully charged.
Maximizing battery operating time
A battery's usefulness depends on how long it can supply power on a
single charge.
How long the charge lasts in a battery depends on:
■ How you configure the computer (for example, whether you enable
battery power saving options). The computer provides a battery save
mode to conserve battery power. This mode has the following options:
■ Display auto off
■ Hard Disk Drive auto off
■ System auto off
■ LCD brightness.
■ How often and how long you use the hard disk, optical media drive and
the disk drive (if one is connected).
■ How much charge the battery contained to begin with.
■ Enabling Sleep Mode or Hibernation Mode conserves battery power if
you are frequently turning the computer off and on.
■ Where you store your programs and data.
■ Closing the display when you are not using the keyboard saves power.
■ Operating time decreases at low temperatures.
■ The condition of the battery terminals. Make sure the battery terminals
stay clean by wiping them with a clean dry cloth before installing the
battery pack.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-9
Power and Power-Up Modes
Retaining data with power off (sleep mode)
When you turn off your computer with fully charged batteries, the batteries
retain data/charge for the following approximate time periods:
Battery
Approximately 1 days (Sleep mode,6-cell)
Approximately 1 month (Shut down mode, all
type of battery packs)
RTC battery
Approximately 1 month
* The availability of this battery is dependent on the model you purchased.
Extending battery life
To maximize the life of your battery pack:
■ If you have extra battery packs, rotate their use.
■ If you will not be using the system for an extended period, remove the
battery pack.
■ Store spare battery packs in a cool dry place out of direct sunlight.
Replacing the battery pack
When the battery pack reaches the end of its operating life you will need to
install a new one. If the Battery indicator flashes amber shortly after the
battery has been fully recharged, the battery pack needs to be replaced.
You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install the battery pack.
Removing the battery pack
To replace a discharged battery pack, follow the steps below.
■ When handling battery packs, be careful not to short circuit the
terminals. Also do not drop, hit or otherwise apply impact; do not
scratch or break the casing and do not twist or bend the battery pack.
■ Do not remove the battery pack while the computer is in Sleep Mode as
data in memory will be lost.
1. Save your work.
2. Turn the computer's power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Turn the computer upside down.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-10
Power and Power-Up Modes
5. Unlock the Battery Pack Lock.
1
Removing the battery pack-1
6. Slide the battery pack latch to the left, then pull the battery out of the
battery bay.
3
2
Removing the battery pack-2
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-11
Power and Power-Up Modes
4. Gently slide the battery into the battery bay until the latch clicks into
place.
1
2
Installing the battery pack
TOSHIBA Password Utility
The TOSHIBA Supervisor Password Utility provides two levels of password
security: User and Supervisor.
Passwords set in TOSHIBA Supervisor Password Utility are different from
®
the Windows login password.
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assistꢀ SECUREꢀ User Password
■ Registered
Click to register a password of up to 8 characters. After a password is
set, you will be prompted to enter it when you start the computer.
■ Not Registered
Click to delete a registered password. Before you can delete a
password, you must first enter the current password correctly.
■ Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK, then, each time the computer is switched
on, this text will be displayed along with the prompt for the password.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-12
Power and Power-Up Modes
Supervisor password
If you set a supervisor password, some functions will be restricted when a
user logs on with the user password. To set a supervisor password:
TOSHIBA Assist ꢀ SECURE ꢀ Supervisor password
This utility lets you do the following:
■ Register or delete the supervisor password.
■ Specify restrictions for general users.
Starting the computer by password
If you have already registered a password, there is one way to start the
computer:
■ Enter the password manually.
The password is necessary only if the computer was shut down in boot
mode, not in Hibernation or Sleep mode.
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3, Getting Started. The
following message will appear in the LCD:
Enter Password [xxxxxxxx]
At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.
2. Enter the Password.
3. Press Enter.
If you enter the password incorrectly three consecutive times, the
the password.
Power-up modes
The computer has three power-up modes:
■ Hibernation (saves data in memory to the hard disk)
■ Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a 'sleep' mode)
■ Boot (does not save data in memory)
Refer also to the section Turning on the power in Chapter 3, Getting
Started.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-13
Power and Power-Up Modes
Panel power off/on
This feature makes the computer to enter Hibernation when the display
panel is closed and turns it back on when the display panel is opened.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.
System automatic Sleep/Hibernation
This feature automatically turns off the system in Sleep or Hibernation
mode if the computer is not used for a set duration.
Refer to Special features, in Chapter 1, P200 Series Features for an
explanation of how to set the duration.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7-14
HW Setup
Chapter 8
HW Setup
This chapter explains how to use the TOSHIBA HW Setup utility to
configure your computer. TOSHIBA HW Setup lets you configure settings
for various hardware devices through a number of tabs titled General,
Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
Accessing HW Setup
Start ꢀ All Programs ꢀ TOSHIBA ꢀ Utilities ꢀ HWSetup.
HW Setup Window
The HW Setup window contains the following tabs: General, Password,
Display, Boot Priority, Keyboard, LAN, and USB.
There are also these three buttons:
OK
Accepts your changes and closes the HW Setup
window.
Cancel
Apply
Closes the window without accepting your
changes.
Accepts all your changes without closing the
HW Setup window.
General
This window displays the BIOS version and contains two buttons:
Default
Return all HW Setup values to the factory
settings.
About
Display the HW Setup version.
Setup
This field displays BIOS Version and date.
When finish BIOS update, please restart your computer and press F2 into
BIOS setup manual and load BIOS default one time.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-1
HW Setup
Password
This tab allows you to set or reset the user password for power on.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
This option allows you to select the display to be used when the computer
is switched on.
Auto-Selected
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB
Selects both the internal LCD and external
monitor for simultaneous display.
CPU
This function lets you set the CPU operating mode.
This option is displayed only for Core Duo/Solo processor based model.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary (Default).
Always Low
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2
HW Setup
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer.
Select the boot priority from the drop down list.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U
N
C
Selects the USB floppy disk drive.
Selects the Network.
Selects optical device.
To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: HDD1, HDD2, CD/DVD, and
LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and press Enter.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep mode.
Enabled
Disabled
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
USB
Legacy USB Support
Use this option to enable or disable legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy disk drive by setting the Legacy USB Support option to enable.
Enabled
Disabled
Enables Legacy USB Support.
Disables Legacy USB Support.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-3
HW Setup
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
The Wake-up LAN function is not supported on battery power in Hibernate/
Power off mode, before you plan to use this function please make sure
your AC power source is properly connected to the system.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
Enables Built-in LAN function (Default).
Disables Built-in LAN function.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
8-4
Optional Devices
Chapter 9
Optional Devices
Optional devices can expand the computer's capabilities and its versatility.
This chapter describes connection or installation of the following types of
devices, which are available from your TOSHIBA dealer:
Cards/Memory
■ Express Card
■ SD (Secure Digital) / SDHC(Secure Digital High Capacity) / MMC
(Multi Media Card) / MS (Memory Stick) /MS Pro (Memory Stick Pro) /
xD (xD-Picture Card) cards
■ Memory modules
Power devices
■ Battery pack
■ AC adapter
Peripheral devices
■ External monitor
■ Television
■ i.LINK (IEEE1394a)
■ Security lock
■ HDMI V1.2
Express Card
The computer (depending on the model) is equipped with an Express Card
expansion slot that can accommodate two standard module formats; an
Express Card/34 module and an Express Card/54 module. An Express
Card module is a small, modular add-in card technology based on PCI
Express and Universal Serial Bus (USB) interfaces.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-1
Optional Devices
Installing an Express Card
One Express Card connector is located on the right side of the computer.
The computer's hot-install feature lets you install Express Card while the
computer's power is on.
To install an Express Card, follow the steps below.
1. Insert the Express Card.
2. Press gently to ensure a firm connection.
Installing an Express Card
After installing the card, refer to the card's documentation and check the
configuration in Windows to make sure it is appropriate for your card.
Removing an Express Card
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Click the Express Card you want to remove.
3. Press the Express Card once to extend it.
4. Grasp the extended Express Card, and remove it.
Removing an Express Card
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-2
Optional Devices
SD/SDHC/MMC/MS/MS Pro/xD Memory cards
The computer is equipped with a multiple digital media card slot that can
accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These
memory cards let you easily transfer data from devices, such as digital
cameras and Personal Digital Assistants, which use flash-memory.
Card Type
SD
Capacities
up to 2 GB
SDHC
MMC
MS
4 GB
up to 1 GB
up to 128 MB, 256 MB (128 MB × 2, selectable)
MS Pro
xD
up to 2 GB
up to 2 GB
Keep foreign objects out of the memory card slot. A pin or similar object
can damage the computer's circuitry.
®
Do not format a memory card with Windows as it might result in that card
not being able to be used with some peripheral devices.
The Logo of SD memory card is
.
The Logo of SDHC memory card is
.
The card is designed so that it can be inserted only one way. Do not try to
force the card into the slot.
Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not
compatible with the Multiple Digital Media Card slot. Do not insert Memory
Stick Duo/PRO Duo into the slot. Data may be lost or damaged if you use
any card other than those supported.
For more details on using memory cards, see manuals accompanying the
cards.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-3
Optional Devices
Installing a memory card
To install a memory card:
1. Insert the memory card.
2. Press gently to ensure a firm connection.
Inserting a memory card
Make sure the memory card is oriented properly before you insert it.
®
If Windows fails to read the card, remove it then re-insert it.
The multiple digital media card slot only accepts one type of card at a time.
Do not attempt to install more than one card as you risk damaging either
the cards themselves or the computer.
Removing a memory card
To remove a memory card, follow the steps below:
1. Click the Safely Remove Hardware icon on the Taskbar.
2. Select a device, then click the Stop button. A confirmation dialog may
appear, depending on how the device is registered with the system; if
so, confirm that you want to remove the device.
3. Gently press the memory card inside the socket to eject it.
4. Grasp the card and remove it.
Removing a memory card
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-4
Optional Devices
■ Make sure the memory card indicator is out before you remove the
card or turn off the computer's power. If you remove the card or turn off
the power while the computer is accessing the card you may lose data
or damage the card.
■ Do not remove the card while the computer is in Sleep or Hibernation
mode. The computer could become unstable or data in the memory
card could be lost.
■ Do not turn off or place the computer into either Sleep Mode or
Hibernation Mode while data is being transferred to or from the memory
card. The system may become unstable or data in the memory card
may be lost.
Memory card care
Set the write-protect switch to the lock position, if you do not want to record
data.
1. Do not write to a memory card if the battery power is low. Low power
could affect writing accuracy.
2. Do not remove a memory card while read/write is in progress.
3. The memory card is designed so that it can be inserted only one way.
Do not try to force the card into the slot.
4. Do not leave a memory card partially inserted in the slot. Press the
memory card until you hear it click into place.
5. Do not twist or bend memory cards.
6. Do not expose memory cards to liquids or store in humid areas or lay
media close to containers of liquid.
7. After using a memory card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.
Memory expansion
You can install additional memory in the computer's memory module socket
to increase the amount of RAM. This section describes how to install and
remove a memory module.
■ Before you install or remove a memory module, turn off the computer
with the Shut Down option in the Windows Start menu. If you install or
remove a memory module while the computer is in Sleep or
Hibernation mode, data will be lost.
■ Some memory modules can be physically installed but are not
compatible with the computer. In this case the computer will issue a
warning.
CAUTION: If you want to upgrade system memory, you should only use
certified modules. Ask your vendor or check the TOSHIBA web site for a
list of approved memory products.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-5
Optional Devices
Insert the two memory modules of the same specifications and capacity
into Slot A (Upper) and Slot B (Bottom) respectively. The computer will
operate in dual channel mode.
You can access the inserted memory modules efficiently in dual channel.
Point to note about Memory Module Error
If you install a memory module that is not compatible with the computer, the
Power indicator will flashes (on for 0.5 seconds, off for 0.5 seconds) in the
following ways:
■ If there is only an error in Slot A: repeatedly flashes orange twice, then
blue.
■ If there is only an error in Slot B: repeatedly flashes orange, then blue
twice.
■ If there is an error in Slot A and in Slot B: repeatedly flashes orange
twice, then blue twice.
In all instances you should shut down the computer and remove the
incompatible module(s).
Installing Memory on Bottom Side
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
Do not try to install a memory module under the following conditions. You
can damage the computer and the module.
a. The computer is turned on.
b. The computer was shut down using the Stand by mode.
c. Power to the optical disc drive has been turned on by the CD Power
switch.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery, refer to
Chapter 7, Power and Power-Up Modes.
4. Loosen the one screw securing the memory module socket cover.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-6
Optional Devices
5. Slide your fingernail or a thin object under the cover and lift it off.
Removing the memory module socket cover
6. Fit the module's connectors into the computer's connectors at about a
45 degree angle and press the module carefully to ensure a firm
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Push the module down so it lies flat. Latches on either side will click into
place to secure the module.
2
1
Installing a module
8. Seat the cover and secure it with the screw.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-7
Optional Devices
9. Replace the battery pack as described in Chapter 7, Power and Power-
Up Modes.
10. Turn the power on and make sure the added memory is recognized.
Removing Memory on Bottom Side
The Slot A is reserved for main memory, the upper slot. Use the slot B for
expanded memory, the bottom slot. If only one card is installed, use the
slot A.
B
A
If you use the computer for a long time, the memory modules will become
hot. In this case, let the memory modules cool to room temperature before
you replace them.
To remove the memory module, make sure the computer is in boot mode
then:
1. Be sure the power is off and all cables are disconnected from the
computer.
Do not try to remove a memory module with the computer turned on. You
can damage the computer and the module.
2. Turn the computer upside down and remove the battery and loosen the
screw securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
5. Grasp the module and pull it out.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-8
Optional Devices
1
Latch
3
2
Removing the memory module
6. Seat the cover and secure its screw.
7. Replace the battery.
Additional battery pack
You can increase the portability of the computer with additional battery
packs. If you're away from an AC power source and your battery runs low,
you can replace it with a freshly charged battery. See Chapter 7, Power and
Power-Up Modes.
Additional AC adapter
If you frequently carry the computer to different sites such as your home
and office, having an AC adapter at each location reduces the weight and
bulk of your load.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer.
To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer on.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-9
Optional Devices
When you turn on the power, the computer automatically recognizes the
monitor.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to
switch to the internal display. Refer to Chapter 6, The Keyboard, for details
on using hot keys to change the display settings.
Television
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For ATI Mobility Radeon™ HD2400/HD2600*
1. Click Start ꢀ Control Panel ꢀ Personalization.
2. Choose Display Settings to change resolution and colors.
3. Click Start and All Programs.
4. Click Catalyst Control Center
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-10
Optional Devices
5. Select CCC.
6. In Catalyst Control Center window, setup your television or CRT and
Notebook displays.
* The availability of this feature is dependent on the model you purchased.
HDMI
A HDMI monitor can be connected to the HDMI out put on the computer. To
connect monitor, follow the steps as detailed below:
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not be confirmed, some HDMI monitors may not function
properly.
1. Click Start and click All Programs.
2. Click Catalyst Control Center.
3. Select CCC.
4. If you find Catalyst Control Center - Basic View, select Advanced then
click Next.
5. At Catalyst Control Center windows, select Displays Manager from left
select panel.
User’s Manual
9-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
6. Click Desktop Area and Refresh Rate to select the one of below
format which is supported on this platform.
Country/Region
Signal Format*
1080i HDTV
720p HDTV
576p EDTV
480p EDTV
Any
Any
Any
Any
* Lists the actual Signal Formats supported by the HDMI monitor you are
using.
7. Click Apply button.
Above operation is the way to select Desktop Area and Refresh Rate
format directly. The resolution also can be selected on Display Manager
Tab.
Connecting the HDMI out port
1. Plug one end of the HDMI out cable into the HDMI out port of the HDMI
device.
2. Plug one end of the HDMI out cable into the HDMI out port on your
computer.
HDMI out port
Connecting the HDMI out port
Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
End user refer page 8-9 and Appendix B-6, for more detail, to out put HDMI
device.
■ Be sure to use the Fn + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■ Do not change the display device under the following conditions.
■ While data is being read or written.
■ While communication is being carried out.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-12
Optional Devices
Settings for audio on HDMI
To set the audio device to use the HDMI, follow the steps below.
1. Go to Start then select Control Panel.
2. Click Hardware and Sound then select Sound. If you are in control
panel classic view, select Sound directly.
3. In Sound window, select Digital Output Device (HDMI) then click Set
Default once.
Selecting Audio HDMI output
Please follow above steps to change back to speakers after you plug out
HDMI connector.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-13
Optional Devices
Remote Controller
Pause
Record
Play
Access indictor
Power
Stop
Fast Forward
Rewind
Replay
Back
Skip
Start
More Info
OK
Arrows
Mute
Volume +
Volume -
Guide
Channel/Page
Live TV
DVD Menu
Numbers
Recorded TV
Clear
Teletext
Red
Enter
Blue
Yellow
Green
Remote Cotroller
User’s Manual
9-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Power
Starts or terminates the operating system.
This button functions like the Power button of your
computer. By default, the Sleep Mode is
equivalent to the Power Off state of your
computer. To change the setting, click Start ꢀ
Control Panel ꢀ System and Maintenance ꢀ
Power Options. The following 4 options are
available: Do nothing, Sleep, Hibernation, and
Shut down.
Access indicator
Record
This indicator will glow while the Remote
Controller is sending signals to the computer.
Please note that this indicator will not light after
the battery has been completely discharged.
Records the selected television program and
store it on your hand disk drive.
Stop
Stops the media currently playing.
Pause
Pauses an audio or video track, and live or
recorded TV programs.
Play
Plays the selected media.
REW (Rewind)
Moves the media (video, DVD, music, and so on)
backwards.
FWD (Fast Foward)
Replay
Moves the media (video, DVD, music, and so on)
forwards.
Moves the media backwards (seven seconds for
videos and live TV, one music track or one DVD
chapter at a time).
Skip
Moves the media forwards (30 seconds for videos
and live TV, one music track or one DVD chapter).
Back
Displays the previous window.
More Info
The button provides more details on a TV
program than is listed in the Guide.
Arrows
OK
Moves the cursor to navigate within Media Center
windows.
Selects the desired action or window option. It
acts like the ENTER Key. if watching TV in full
screen mode, pressing OK switches back to the
previous viewed channel. Press again to toggle
back. It acts the same way as a Jump button on
some TV remote controls.
OK
Volume +
Increases the volume while watching TV, viewing
DVD’s or replaying CD’s.
User’s Manual
9-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Devices
Volume -
Start
Decreases the volume while watching TV, viewing
DVD’s or replaying CD’s.
Opens Media Center to the main window.
Channel/Page up (+) Changes the TV channel or moves a page up and
and down (-)
down, depending on the available options.
Mute
Turns your computer sound off.
Recorded TV
Guide
Allows you to start recording of TV programs. The
Recorded TV feature of Media Center will be
activated.
Opens the Television Program Guide to display
available TV channels and programs to watch
and record.
Live TV
A shortcut to the full screen view. It also takes you
to the current point in a live TV program after
pausing live TV.
DVD Menu
Numbers
Opens the main menu on a DVD movies, if
avaiable.
Allows you to select a channel or chapter number
while watching TV, or CD/DVD replay.
Numbers, letters or symbols can be entered.
To select a channel or chapter number of two or
more digits, press the number sequentially. For
example, press the "1" button and then the "0"
button to select the number 10.
Clear
Enter
Deletes entered numbers, letters or symbols.
The OK button on the Remote Controller has the
same functions.
Red, Green, Yellow
and Blue buttons
It jumps to a registration link.
These buttons are not provided with some
models.
Teletext
Starts or terminates the Teletext mode.
This button is not provided with some models.
Using the Remote Controller
This computer includes a remote control unit, which allows you to control
some of your computers from distant location.
■ The Remote Controller is designed specially for this computer.
■ Some application programs may not support remote control functions.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-16
Optional Devices
Operational range of the Remote Controller
Point the Remote controller at your computer and press a button. The
operational angle and distance are described below.
Distance
Angle
Within 5 m from the infrared receiver window.
Within a 30 degree horizontal and 15 degree
vertical range oof the infrared receiver window.
30 degrees
Infrared receiver
window
15 degrees
(vertically)
30 degrees
15 degrees
(vertically)
5 m
Remote Controller
* The appearance of the provided Remote Controller may vary from model
to model.
Operation range of the remote control
Even if within the effective scope as described above, the remote control
may malfunction or not work correctly in the following cases.
■ When an obstacle stands between the infrared receiver window or your
computer and the Remote Controller.
■ When direct sunlight or strong fluorescent light strikes the infrared
receiver window.
■ When the infrared receiver window or the infrared emission part of the
Remote Controller is dirty.
■ When other computers which use an infrared remote controller are
used near to your computer.
■ When a low battery condition is present.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-17
Optional Devices
Installing/Removing batteries
Be sure to install the dry batteries provided with this product using the
Remote Controller.
The procedures for installing and removing the bateries vary depending on
the type of the Remote Controller. Check the type and then install or
remove the bateries as instructed.
Store the battery for the remote control beyond the reach of children.
If a child swallows a battery, this might result in chocking. If it happens,
contact a doctor immediately.
Observe the following precautions when using the battery of the Remote
Controller.
■ Do not use batteries other than those specified.
■ Ensure that you insert the batteries with their polarities correctly
aligned (+ or -).
■ Do not recharge, heat, disassemble or shot the battery, or put it into a
fire or flame.
■ Do not use a battery whose ‘recommended expiration date’ has been
reached, or is completely discharged.
■ Do not use different type of battery or old and new batteries at the
same time.
■ Do not carry the battery together with metal necklaces, hairpins or
other metal accessories.
■ When storing or disposing of used batteries, make sure to put some
insulation tape on their terminal (+ and -) to avoid short-circuits.
If these precausions are not followed, heating, fluid leakage or explosion
may occur. This may cause bums or personal injury. If battery fluid gets on
your skin or clothes, wash immediately with clean water. If battery fluid
gets in your eyes, rinse your eyes with clean water immediately and see a
doctor. Do not touch the battery fluid on instruments or devices with bare
hands. Wipe off with a cloth or paper towel.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-18
Optional Devices
Type of battery that can be used for the Remote Controller
When batteries shipped with the Remote Controller are discharged, replace
them with commercially available AA manganese batteries or AA alkaline
batteries. Other types or battery should not be used.
Installing the batteries
1. open the battery cover on the back of the Remote Controller. Slide the
Cover in the direction of the arrow to remove the cover.
Battery cover
Opening the battery cover
2. Insert the batteries in place. Be sure to place the batteries with their
polarities (+ and -) in the correct position.
Batteries
+
-
Inserting the batteries
3. Close the battery cover. Close the cover securely until it clicks.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-19
Optional Devices
Battery cover
Closing the battery cover
Replacing the batteries
When the batteries in ther Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back of the Remote Controller.
2. Replace the batteries. Be sure to place the batteries with their polarities
(+ and -) in the correct position.
Batteries
+
-
Removing the batteries
3. Close the battery cover. Close the cover securely until it clicks.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-20
Optional Devices
i.LINK (IEEE1394a)
i.LINK (IEEE1394a) is used for high-speed data transfer for a range of
compatible devices such as:
■ Digital video cameras
■ Hard disk drives
■ MO drives
■ Optical disc drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Precautions
■ Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer.
■ Do not transfer data in areas where static electricity is easily generated
or in areas subjected to electronic noise. Data can be destroyed.
■ If you are transferring data through an IEEE1394a hub, do not connect
or disconnect other devices from the hub during data transfer. There is
a likelihood that data will be damaged. Connect all devices to the hub
before you turn on the computer's power.
Connecting
1. Make sure the connectors are properly aligned and plug the i.LINK
(IEEE1394a) cable into the computer.
2. Plug the other end of the cable into the device.
Note the following when you use i.LINK:
■ You may need to install drivers for your i.LINK devices.
■ Not all i.LINK devices have been tested. Therefore, compatibility with all
i.LINK devices cannot be guaranteed.
■ Use S100, S200 or S400 cables no longer than three meters.
■ Some devices might not support Sleep or automatic off functions.
■ Do not connect or disconnect an i.LINK device while it is using an
application or when the computer is automatically shutting it down to
save power. Data might be destroyed.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-21
Optional Devices
Disconnecting
1. Click the Safely Remove Hardware icon on the Task Bar.
2. Point to i.LINK (IEEE1394a) device and click.
3. Disconnect the cable from the computer then from the i.LINK device.
Refer also to the documentation that came with your i.LINK device.
Security lock
A security lock enables you to anchor your computer to a desk or other
heavy object to help prevent unauthorized removal of the computer.
Attach one end of a cable to the desk and the other end to the security lock
slot on the right side of the computer.
Security lock
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9-22
Troubleshooting
Chapter 10
Troubleshooting
TOSHIBA designed the computer for durability. However, should problems
occur, following the procedures in this chapter can help to determine the
cause.
All readers should become familiar with this chapter. Knowing what might
go wrong can help prevent problems from occurring.
Problem solving process
Resolving problems will be much easier if you observe the following
guidelines:
■ Stop immediately when you recognize a problem exists. Further action
may result in data loss or damage. You may destroy valuable problem-
related information that can help solve the problem.
■ Observe what is happening. Write down what the system is doing and
what actions you performed immediately before the problem occurred.
If you have a printer attached, print a copy of the screen using PRTSC.
■ Isolate the problem. Using the tools available to you, such as the
troubleshooting tips in this chapter, try to discover the specific actions
that caused the problem.
The questions and procedures offered in this chapter are meant as a guide,
they are not definitive problem solving techniques. Many problems can be
solved simply, but a few may require help from your dealer. If you find you
need to consult your dealer or others, be prepared to describe the problem
in as much detail as possible.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-1
Troubleshooting
Preliminary checklist
Consider the simplest solution first. The items in this checklist are easy to
fix and yet can cause what appears to be a serious problem.
■ Make sure you turn on all peripheral devices before you turn on the
computer. This includes your printer and any other external device you
are using.
■ Before you attach an external device, turn the computer off. When you
turn the computer back on it recognizes the new device.
■ Make sure all options are set properly in the setup program.
■ Check all cables. Are they correctly and firmly attached? Loose cables
can cause signal errors.
■ Inspect all connecting cables for loose wires and all connectors for
loose pins.
■ Check that the optical disc drive is correctly inserted.
Make notes of your observations and keep them in a permanent error log.
This will help you describe your problems to your dealer. If a problem
recurs, the log will help you identify the problem faster.
Analyzing the problem
Sometimes the system gives clues that can help you identify why it is
malfunctioning. Keep the following questions in mind:
■ Which part of the system is not operating properly: keyboard, disk
drives, hard disk drive, printer, display. Each device produces different
symptoms.
■ Is the operating system configuration set properly? Check the
configuration options.
■ What appears on the display screen? Does it display any messages or
random characters? Print a copy of the screen if you have a printer
attached. Look up the messages in the software and operating system
documentation. Check that all connecting cables are correctly and
firmly attached. Loose cables can cause erroneous or intermittent
signals.
■ Do any indicators light? Which ones? What color are they? Do they stay
on or blink? Write down what you see.
■ Do you hear any beeps? How many? Are they long or short? Are they
high pitched or low? Is the computer making any unusual noises? Write
down what you hear.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-2
Troubleshooting
Record your observations so you can describe them to your dealer.
Software
The problems may be caused by your software. If
you cannot load a software package, the media
may be damaged or the program might be
corrupted. Try loading another copy of the
software.
If an error message appears while you are using
a software package, check the software
documentation. These documents usually include
a problem solving section or a summary of error
messages.
Next, check any error messages in the operating
system documentation.
Hardware
If you cannot find a software problem, check your
hardware. First run through the items in the
preliminary checklist above. If you still cannot
correct the problem, try to identify the source. The
next section provides checklists for individual
components and peripherals.
Hardware and system checklist
This section discusses problems caused by your computer’s hardware or
attached peripherals. Basic problems may occur in the following areas:
■ System start-up
■ Self test
■ TV output signal
■ LAN
■ Power
■ Sleep/Hibernation
■ Memory expansion
■ Modem
■ Battery
■ Keyboard
■ LCD panel
■ Hard disk drive
■ Password
■ i.LINK (IEEE1394)
■ Wireless LAN
■ Monitor
■ DVD Super Multi drive supporting
double layer disc recording
■ HD DVD drive supporting disc
recording
■ Disk drive
■ Real Time Clock
■ HDMI
■ Sound system
■ Pointing Device
■ USB
■ Web Camera
■
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-3
Troubleshooting
System start-up
When the computer does not start properly, check the following items:
■ Self Test
■ Power Sources
■ Power-on Password
Self test
When the computer starts up, the self test will be run automatically, and the
following will be displayed:
(This screen image is
one of the examples.
You may see the
different screen image
depending on the
model you
purchased.)
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating system
based around how the Boot Priority option is set within the computer’s
BIOS setup.
If any of the following conditions are present, the self test failed:
■ The computer stops and does not proceed to display information or
messages except the TOSHIBA logo.
■ Random characters appear on the screen, and the system does not
function normally.
■ The screen displays an error message.
Turn off the computer and check all cable connections as well as memory
module connections. If the test fails again, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-4
Troubleshooting
Power
When the computer is not plugged into an AC outlet, the battery pack is the
primary power source. However, your computer has a number of other
power resources, including an intelligent power supply and Real Time
Clock battery. These resources are interrelated and any one could affect
apparent power problems. This section provides check lists for AC power
and the battery. If you cannot resolve a problem after following them, the
cause could lie with another power resource. In such cases you should
contact your dealer.
Overheating power down
If the computer’s internal temperature becomes too high, the computer will
automatically shut down
AC power
If you have trouble turning on the computer with the AC adapter connected,
check the DC IN indicator. Refer to Chapter7, Power and Power-Up Modes,
for more information.
Problem
Procedure
AC adapter doesn't
power the computer
Check the connections. Make sure the cord is
firmly connected to the computer and a power
(DC IN indicator does outlet.
not glow blue).
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adapter still does not power the
computer, contact your dealer.
User’s Manual
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Battery
If you suspect a problem with the battery, check the DC IN indicator as well
as the indicators for the battery. For information on indicators and battery
operation see Chapter 7, Power and Power-Up Modes.
Problem
Battery doesn't power The battery may be discharged. Connect the AC
the computer. power cord to charge the battery.
Battery doesn't charge If the battery is completely discharged, it will not
Procedure
when the AC power
cord is attached.
(Battery indicator does
not glow amber.)
begin charging at once. Wait a few minutes.
If the battery still does not charge, make sure the
outlet is supplying power. Plug in an appliance
and see if it works. If it doesn't, try another power
source.
Check whether the battery is hot or cold. If the
battery is too hot or too cold, it will not charge
properly. Let it reach room temperature.
Unplug the AC adapter and remove the battery to
make sure the terminals are clean. If necessary
wipe them with a soft dry cloth dipped in alcohol.
Connect the AC adapter and replace the battery.
Check the Battery indicator. If it does not glow,
let the computer charge the battery for at least
20 minutes. If the Battery indicator glows after
20 minutes, let the battery continue to charge for
at least another 20 minutes before turning on the
computer.
If the indicator still does not glow, the battery may
be at the end of its operating life.
Replace it.
If you do not think the battery is at the end of its
operating life, see your dealer.
Battery doesn't power Check the power consumption settings in the
the computer as long as Power Options. Consider using a power saving
expected.
mode.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-6
Troubleshooting
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 6, The Keyboard.
Problem
Procedure
Output to screen is
garbled.
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard, consult
your dealer.
LCD panel
Problem
Procedure
Lines appear broken.
Check if you are in DOS mode. In DOS, lines
may appear broken, because of the LCD screen's
higher resolution. The Windows display should
appear normal.
No display.
Press the Hotkey Fn + F5 to change the display
priority and ensure it is not set for an external
monitor.
Make sure instant security was not activated. Try
entering your password, if you have one
registered. Or, turn the power off and back on to
clear instant security.
Problems above remain Refer to your software's documentation to
unresolved or other
determine if the software is causing the difficulty.
problems occur.
Contact your dealer if the problems continue.
Hard disk drive
Problem
Procedure
Computer does not boot Insert a system disk and reboot.
from hard drive.
There may be a problem with your operating
system files. Refer to your operating system
documentation.
Slow performance
Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your operating system
documentation or online HELP for information on
running SCANDISK and the defragmenter.
Contact your dealer if the problems continue.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-7
Troubleshooting
Password
Problem
Procedure
Cannot enter password Refer to Chapter 7, Power and Power-Up Modes.
i.LINK (IEEE1394)
Problem
Procedure
i.LINK device does not Make sure the cable is securely connected to the
function
computer and to the device.
Make sure the device's power is turned on.
Reinstall the drivers. Open the Windows Control
Panel and double-click the Add New Hardware
icon. Follow the on-screen directions.
Restart Windows.
If problems persist, contact your dealer.
Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4, Operating Basics.
Problem
Procedure
Cannot access Wireless Make sure the computer's wireless
LAN
communication switch is set to on.
Use the ConfigFree program that comes pre-
installed in your computer to see LAN status.
If problems persist, consult your LAN
administrator.
Monitor
Refer also to Chapter 9, Optional Devices, and to your monitor’s
documentation.
Problem
Procedure
Monitor does not turn on Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-8
Troubleshooting
Problem
Procedure
No display
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Display error occurs
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Monitor goes into
panning mode
Check your monitor specification. It might not
support the selected resolution and refresh rate.
The resolution on the monitor might go into
panning mode when wide screen resolution is
selected. Refer to Appendix B, Display Modes.
Sound system
Problem
Procedure
No sound is heard
Adjust the volume control dial.
Check the software volume settings.
If appropriate, make sure the headphone
connection is secure. Check Windows Device
Manager and ensure the sound function is
enabled and that settings for I/O address,
interrupt level and DMA are correct for your
software and do not conflict with other hardware
devices that you have connected to the
computer.
If problems persist, contact your dealer.
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter
and to your mouse documentation.
TouchPad
Problem
Procedure
On-screen pointer does The system might be busy. If the pointer is
not respond to Pad
operation
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it. You may
also press Fn + F9 to enable the TouchPad and
then try again to move it.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-9
Troubleshooting
Problem
Procedure
Double-tapping does
not work
Try changing the double-click speed setting in the
mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
USB mouse
Problem
Procedure
On-screen pointer does The system might be busy. If the pointer is
not respond to mouse shaped as an hourglass, wait for it to resume its
movement
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Double-clicking does
not work
Try changing the double-click speed setting in the
mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse pointer
moves erratically
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-10
Troubleshooting
USB
Refer also to your USB device’s documentation.
Problem
Procedure
USB device does not
work
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If problems persist, contact your dealer.
TV output signal
Problem
Procedure
Display on TV is poor
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
No display
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 6, The Keyboard.
If problems persist, contact your dealer.
If you turn the computer off in Sleep Mode while the display is on a TV, the
computer will select either the internal LCD or an external computer CRT
as the display device the next time it is switched on.
LAN
Problem
Procedure
Cannot access LAN or Check for a firm cable connection between the
the Wake up on LAN
feature does not work
LAN hub.
Make sure the AC adapter is connected. You
cannot access a LAN using the computer's
battery power.
If problems persist, consult your LAN
administrator.
User’s Manual
10-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Sleep/Hibernation
Problem
Procedure
Is Windows Media Player open? The system
The system will not
enter Sleep/Hibernation might not enter Sleep/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select Sleep/
Hibernation.
If problems persist, contact your dealer.
Memory expansion
Refer also to Chapter 9, Optional Devices, for information on installing
memory modules.
Problem
Procedure
The computer hangs up Make sure the memory module installed in the
and issues beep
expansion slot is compatible with the computer.
sounds. (A long beep,
three short beeps, three
short beeps, and then a
long beep.)
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adapter and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adapter.
6. Turn on the power.
If problems persist, contact your dealer.
Modem
Problem
Procedure
Communication
Make sure the computer's internal modem
software can't initialize settings are correct. Refer to Phone and Modem
the modem Options Properties in the Control Panel.
You can hear a dial tone If the call is going through a PBX machine, make
but can't make a call
sure the communication application's tone dial
detection feature is disabled.
You place a call, but a Make sure the settings are correct in your
connection can't be
made
communications application.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-12
Troubleshooting
Problem
After making a call you Make sure the tone or pulse selection in your
can't hear a ring communications application is set correctly.
Communication is cut The computer will automatically cut off
Procedure
off unexpectedly
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
A CONNECT display is Check the error control setting in your
quickly replaced by NO communications application.
CARRIER
Character display
In data transmission, make sure the parity bit and
becomes garbled during stop bit settings correspond with those of the
a communication
remote computer.
Check the flow control and communication
protocol.
You cannot receive an Check the "rings before auto answer" setting in
incoming call
your communications application.
If problems persist, contact your dealer.
DVD Super Multi drive supporting double layer disc recording
For more information, refer to Chapter 5, About the HD DVD.
Problem
Procedure
You cannot access a
disc in the drive
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
See the Media Care section in Chapter 4 for
details on cleaning.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-13
Troubleshooting
Problem
Procedure
The software or hardware configuration may be
Some discs run
correctly, but others do causing a problem. Make sure the hardware
not
configuration matches your software's needs.
Check the disc's documentation.
Check the type of disc you are using. The drive
supports:
DVD: DVD-ROM, DVD-Video, DVD-R,
DVD-RW, DVD+R, DVD+RW, DVD-RAM,
DVD+R (Double Layer), DVD-R (dual
Layer)
CD: CD-DA, CD-Text, Photo CD (single/multi-
session), CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2 (Form1, Form2),
Enhanced CD (CD-EXTRA), CD-G (Audio
CD only)
Check the region code on the DVD. It must match
that on the DVD Super Multi drive.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
■ Use only media recommended by TOSHIBA.
■ Do not use the mouse or keyboard during
writing.
■ Use only the software supplied with the
computer for recording.
■ Do not run or start other software during
writing.
■ Do not jar the computer during writing.
■ Do not connect/ disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-14
Troubleshooting
HD DVD-R or HD DVD-ROM drive supporting disc recording
For more information, refer to Chapter 5, About the HD DVD.
Problem
Procedure
You cannot access a
Make sure the drive's drawer is securely closed.
CD/DVD/HD DVD in the Press gently until it clicks into place.
drive
Open the drawer and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the CD, DVD, or HD DVD is dirty.
If it is, wipe it with a clean cloth dipped in water or
a neutral cleaner. See the Media Care section in
Chapter 4 for details on cleaning.
Some CD/DVD/
The computer's software or hardware
HD DVDs run correctly, configuration may be causing a problem - ensure
but others do not
that these configurations match the requirements
of the CD/DVD/HD DVD media (refer to the CD's,
DVD's, or HD DVD's documentation if available).
HD DVD: HD DVD-ROM (Single-sided Single-
Layer), HD DVD-ROM (Single-sided
Dual-Layer), HD DVD-R (Single-sided
Single-Layer), HD DVD-R (Single-
sided Dual-Layer), HD DVD-Video,
HD DVD (Twin format disc)
DVD:
DVD-ROM, DVD-Video, DVD-R/-R
(Dual Layer), DVD+R/+R (Double
Layer), DVD-RW, DVD+RW,
DVD-RAM
CD:
CD-DA, CD-Text, Photo CD. (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROM XA Mode 2 (Form1,
Form2), Enhanced CD (CD-EXTRA),
Addressing Method 2
For DVD Videos, you should check the region
coding on the DVD to ensure that it matches that
on the HD DVD-ROM drive. For reference, region
codes are listed in the Optical disc drives section
in Chapter 2, The Grand Tour in the Online
manual.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-15
Troubleshooting
Problem
Procedure
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
■ Use only media recommended by TOSHIBA.
■ Do not use the mouse or keyboard during
writing.
■ Use only the software supplied with the
computer for recording.
■ Do not run or start other software during
writing.
■ Do not jar the computer during writing.
■ Do not connect/ disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
Disk drive
For information on disk care refer to Chapter 4, Operating Basics.
Problem
Procedure
Some programs run
The software or hardware configuration may be
correctly, but others do causing a problem. Make sure the hardware
not configuration match's your software's needs.
You cannot access the Try another disk. If you can access this disk, the
disk drive
original disk (not the disk drive) is problem.
If problems persist, contact your dealer.
Real Time Clock
Problem
Procedure
The following message The RTC battery charge has become exhausted,
is displayed on the LCD: you should set the date and time in within the
BIOS setup screen through the following steps:
RTC battery is
low or CMOS
checksum is
inconsistent.
Press [F2] key
to set Date/
Time.
1. Press [F1] key. BIOS setup will boot up.
2. Press [F2] to set the date in [System Date].
3. Press [F2] to set the time in [System Time].
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-16
Troubleshooting
Web Camera
Problem
Procedure
Refer to Chapter 4, Using the Web Camera.
Cannot use the Web
Camera
TOSHIBA support
If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.
Before you call
Some problems you experience may be related to software or the operating
system, it is important to investigate other sources of assistance first.
Before contacting TOSHIBA, try the following:
■ Review troubleshooting sections in the documentation for software and
peripheral devices.
■ If a problem occurs when you are running software applications, consult
the software documentation for troubleshooting suggestions. Call the
software company’s technical support for assistance.
■ Consult the dealer you purchased your computer and/or software from.
They are your best sources for current information and support.
Where to write
If you are still unable to solve the problem and suspect that it is hardware
related, write to TOSHIBA at the location listed in the accompanying
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
10-17
Disclaimers
Chapter 11
Disclaimers
This chapter states the Disclaimer(s) information applicable to TOSHIBA
computers.
CPU
Central Processing Unit ("CPU") Performance Disclaimer.
CPU performance in your computer product may vary from specifications
under the following conditions:
■ use of certain external peripheral products
■ use of battery power instead of AC power
■ use of certain multimedia, computer generated graphics or video
applications
■ use of standard telephone lines or low speed network connections
■ use of complex modeling software, such as high end computer aided
design applications
■ use of several applications or functionalities simultaneously
■ use of computer in areas with low air pressure (high altitude
>1,000 meters or >3,280 feet above sea level)
■ use of computer at temperatures outside the range of 5°C to 30°C
(41°F to 86°F) or >25°C (77°F) at high altitude (all temperature
references are approximate and may vary depending on the specific
computer model - please refer to your PC documentation or visit the
CPU performance may also vary from specifications due to design
configuration.
Under some conditions, your computer product may automatically
shutdown. This is a normal protective feature designed to reduce the risk of
lost data or damage to the product when used outside recommended
conditions. To avoid risk of lost data, always make back-up copies of data
by periodically storing it on an external storage medium. For optimum
performance, use your computer product only under recommended
conditions. Read additional restrictions in your product documentation.
Contact Toshiba technical service and support, refer to TOSHIBA support
section in Chapter 10 Troubleshooting for more information.
User’s Manual
11-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Disclaimers
64-Bit Computing.
64-bit processors are designed to take advantage of 32 and 64 bit
computing.
64-bit computing requires that the following hardware and software
requirements are met:
■ 64-bit Operating System
■ 64-bit CPU, Chipset and BIOS (Basic Input/Output System)
■ 64-bit Device drivers
■ 64-bit applications
Certain device drivers and/or applications may not be compatible with a
64-bit CPU and therefore may not function properly. A 32-bit version of the
operating system is preinstalled on your computer unless explicitly stated
that the operating system is 64-bit.
Memory (Main System)
Part of the main system memory may be used by the graphics system for
graphics performance and therefore reduce the amount of main system
memory available for other computing activities. The amount of main
system memory allocated to support graphics may vary depending on the
graphics system, applications utilized, system memory size and other
factors. For PC's configured with 4 GB of system memory, the full system
memory space for computing activities will be considerably less and will
vary bay model and system configuration.
Battery Life
Battery life may vary considerably depending on product model,
configuration, applications, power management settings and features
utilized, as well as the natural performance variations produced by the
design of individual components. Published battery life numbers are
achieved on select models and configurations tested by Toshiba at the time
of publication. Recharge time varies depending on usage. Battery may not
charge while computer is consuming full power.
After going through many charge and discharge cycles, the battery will lose
its ability to perform at maximum capacity and will need to be replaced.
This is a normal phenomenon for all batteries. To purchase a new battery
pack, see the accessories information that is shipped with your computer.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
11-2
Disclaimers
HDD Drive Capacity
9
1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.
The computer operating system, however, reports storage capacity using
powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and
30
therefore shows less storage capacity. Available storage capacity will also
be less if the product includes one or more pre-installed operating systems,
such as Microsoft Operating System and/or pre-installed software
applications, or media content. Actual formatted capacity may vary.
LCD
Over a period of time, and depending on the usage of the computer, the
brightness of the LCD screen will deteriorate. This is an intrinsic
characteristic of LCD technology.
Maximum brightness is only available when operating in AC power mode.
The screen will dim when the computer is operated on battery power and
you will not be able to increase the brightness of the screen.
Graphics Processor Unit ("GPU")
Graphics processor unit ("GPU") performance may vary depending on
product model, design configuration, applications, power management
settings and features utilized. GPU performance is only optimized when
operating in AC power mode and may decrease considerably when
operating in battery power mode.
Wireless LAN
The transmission speed over the wireless LAN and the distance over which
wireless LAN can reach may vary depending on surrounding
electromagnetic environment, obstacles, access point design and
configuration, and client design and software/hardware configurations.
[54 Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g)
standard.] The actual transmission speed will be lower than the theoretical
maximum speed.
Non-applicable Icons
Certain notebook chassis are designed to accommodate all possible
configurations for an entire product series. Therefore, please be aware that
your selected model may not have all the features and specifications
corresponding to all of the icons or switches shown on the notebook
chassis.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
11-3
Disclaimers
Copy Protection
Copy protection technology included in certain media may prevent or limit
recording or viewing of the media.
Images
All images are simulated for purposes of illustration.
LCD Brightness and Eye Strain
Your LCD display has a brightness approaching that of a TV device. We
recommend that you adjust the brightness of your LCD to a comfortable
level to prevent possible strain on your eyes.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
11-4
Specifications
Weight
Starting at 7.2 lbs / 3.27 kg
* Weight may vary depending on product configuration, vendor
components, manufacturing variability and options selected.
Environmental Requirements
Conditions
Operating
Ambient temperature
Relative humidity
5°C to 35°C
20% to 80%
Non-operating
Conditions
Operating
-20°C to 65°C
Altitude (from sea level)
-30 to 10,000 feet
-30 to 40,000 feet
Non-operating
Built-in Modem
Network control unit (NCU)
Type of NCU
Type of line
AA
Telephone line (analog only)
Type of dialling
Pulse
Tone
Control command
Monitor function
AT commands
EIA-578 commands
Computer's speaker
Communication specifications
Communication
System
Data:
Fax:
Full duplex
Half duplex
Communication
Protocol
Data:
ITU-T-Rec
(Former CCITT)
V.21/V.22/V.22bis/V.32/
V.32bis/V.34/V.90/ V.92
(only for USA and
Canada)
Bell
103/212A
Fax:
ITU-T-Rec
(Former CCITT)
V.17/V.29/V.27ter /
V.21 ch2
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A-2
Specifications
Communication
Speed
Data transmission and reception
300/1200/2400/4800/7200/9600/12000/14400/
16800/19200/21600/24000/26400/28800/31200/
33600 bps
Data reception only with V.90/V.92
28000/29333/30666/32000/33333/34666/36000/
37333/38666/40000/41333/42666/44000/45333/
46666/48000/49333/50666/52000/53333/54666/
56000 bps
Fax:
2400/4800/7200/9600/12000/14400 bps
Error correcting
MNP class 4 and ITU-T V.42
Data compression
MNP class 5 and ITU-T V.42bis
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
A-3
Display Modes
Appendix B
Display Modes
This appendix contains a table listing all the display modes when the
display is set to an external monitor.
If you are running some applications (for example a 3D application or video
playback and so on), you may see some disturbance, flickering or frame
dropping on your screen. If that occurs, adjust the resolution of display,
lowering it until the screen is displayed properly. You could also disable
Windows Aero™. to help correct this situation.
CRT Display
Resolution
Color Depth
(bit)
Refresh Rate
(Hz)
800 × 600
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
60, 75, 85, 100
60, 75, 85, 100
60, 75, 85, 100
60, 75, 85, 100
60
1024 × 768
1280 × 800
1280 × 1024
1440 × 900
1600 × 1200
1920 × 1440
2048 × 1536
60
60, 75, 85, 100
60, 75, 85, 100
60
60
60, 75, 85, 100
60, 75, 85, 100
60, 75
60, 75
60
60
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B-1
Display Modes
Some of display mode might not be supported depending on the external
monitor which you use.
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For ATI Mobility Radeon™ HD2400/HD2600*
1. Click Start ꢀ Control Panel ꢀ Personalization.
2. Choose Display Settings to change resolution and colors.
3. Click Start and All Programs.
4. Click Catalyst Control Center
5. Select CCC.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B-2
Display Modes
6. In Catalyst Control Center window, setup your television or CRT and
Notebook displays.
* The availability of this feature is dependent on the model you purchased.
Displaying movies on a HDMI Monitor
This section describes how to set up your system to display movies a HDMI
monitor.
To connect a HDMI monitor, follow the steps below.
1. Turn the computer off.
2. Use a HDMI cable (not supplied) to connect the HDMI monitor to the
HDMI out port on your computer.
3. Turn the HDMI monitor on.
4. Turn the computer on.
If a HDMI monitor is connected to the computer, follow the steps below,
based on the configuration of your computer:
1. Click Start and All Programs.
2. Click Catalyst Control Center.
3. Select CCC.
4. In Catalyst Control Center window, select Display manager from left
select panel.
5. You can see a HDMI monitor that connected in the list (If not, you can
click Detect Monitor once)
6. Drag HDMI monitor icon to "Main:" then select Swap Devices.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B-3
Display Modes
7. After system applying the display mode to HDMI, click Force then
select Desktop area to select the HDMI mode.
* The availability of this feature is dependent on the model you purchased.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
B-4
AC Power Cord and Connectors
Appendix C
AC Power Cord and Connectors
The power cord's AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country/region in which it is used. All cords must meet the following
specifications:
Length:
Minimum 1.7 meters
2
Wire size:
Minimum 0.75 mm
Current rating:
Voltage rating:
Minimum 2.5 amperes
125 or 250 VAC
(depending on country/region's power standards)
Certification agencies
U.S. and Canada:
UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2
Australia:
AS
Europe:
Austria:
Italy:
OVE
IMQ
Belgium:
The
Netherlands:
CEBEC
KEMA
Denmark:
Finland:
France:
Norway:
DEMKO
FIMKO
LCIE
NEMKO
SEMKO
SEV
Sweden:
Switzerland:
Germany:
United
Kingdom:
VDE
BSI
In Europe, two conductors power cord must be VDE type, H05VVH2-F or
H03VVH2-F and for three conductors power cord must be VDE type,
H05VV-F.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
C-1
AC Power Cord and Connectors
For the United States and Canada, two pin plug configuration must be a
2-15P (250V) or 1-15P (125 V) and three pin plug coniguration must be
6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical
code handbook and the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U. S. A. and
Canada, the United Kingdom, Australia and Europe.
USA
United Kingdom
UL approved
BS approved
Australia
Europe
AS approved
Approved by the
appropriate agency
Canada
China
CSA approved
CCC approved
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
C-2
If your computer is stolen
Appendix D
If your computer is stolen
Always take care of your computer and try to prevent it from being stolen.
You are the owner of a valuable technical device, which may be highly
attractive to thieves, so please do not leave it unattended in a public place.
To further help protect against theft, security cables can be bought for use
with your notebook when it is being used at home or in the office.
Make a note of your computer’s machine type, model number, and serial
number, and put it in a safe place. You will find this information on the
underside of your notebook. Please also keep the receipt of the computer
you purchased.
Should your computer be stolen, however, we’ll help you try to find it.
Before contacting TOSHIBA, please prepare the following information
which is necessary to uniquely identify your computer:
■ In which country was your computer stolen?
■ What type of machine do you have?
■ What was the model number (PA number)?
■ What was the serial number (8 digits)?
■ When was it stolen, i.e. date?
■ What is your address, phone, and fax number?
To register the theft on paper, please follow these procedures:
■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below.
■ Attach a copy of your receipt showing where your computer was
purchased.
■ Either fax or send the receipt and registration form to the address
below.
To register the theft online, please follow these procedures:
area, choose Computer Systems.
■ In the Computer Systems page, open the Support & Downloads menu
and choose the Stolen Units Database option.
Your entries are used to track your computer at our service points.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
D-1
If your computer is stolen
TOSHIBA Theft Registration
Send to:
TOSHIBA Europe GmbH
Technical Service and Support
Leibnizstr. 2
93055 Regensburg
Germany
Fax number:
+49 (0) 941 7807 921
Country stolen:
Machine type:
(e.g. P200 Series)
Model number:
(e.g. PSA50 YXT)
Serial number:
(e.g. 12345678G)
Date stolen:
Year
Month
Day
Owner’s details
Last name, first name:
Company:
Street:
Postal Code/City:
Country:
Phone:
Fax:
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
D-2
Glossary
Glossary
The terms in this glossary cover topics related to this manual. Alternate
naming is included for reference.
Abbreviations
AC: alternating current
AGP: accelerated graphics port
BIOS: basic input output system
CD-ROM: Compact Disc-Read Only Memory
CD-RW: Compact Disc-Read/Write
CMOS: complementary metal-oxide semiconductor
CPU: central processing unit
CRT: cathode ray tube
DC: direct current
DDC: display data channel
DMA: direct memory access
DOS: disk operating system
DVD: digital versatile disc
ECP: extended capabilities port
FDD: floppy disk drive
HDD: hard disk drive
IDE: integrated drive electronics
I/O: input/output
IRQ: interrupt request
KB: kilobyte
LCD: liquid crystal display
LED: light emitting diode
LSI: large scale integration
MS-DOS: Microsoft Disk Operating System
PCI: peripheral component interconnect
RAM: random access memory
ROM: read only memory
RTC: real time clock
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-1
Glossary
SCSI: small computer system interface
TFT: thin-film transistor
USB: Universal Serial Bus
VESA: Video Electronic Standards Association
VGA: video graphics array
WXGA+: wide extended graphics array
A
adaptor: A device that provides an interface between two dissimilar
electronic devices. For example, the AC adaptor modifies the power
from a wall outlet for use by the computer. This term also refers to
the add-in circuit cards that control external devices, such as video
monitors and magnetic tape devices.
application: A group of programs that together are used for a specific task
such as accounting, financial planning, spreadsheets, word
processing and games.
B
BIOS: Basic Input Output System. The firmware that controls data flow
within the computer. See also firmware.
bit: Derived from "binary digit," the basic unit of information used by the
computer. It is either zero or one. Eight bits is one byte. See also
byte.
boot: Short for bootstrap. A program that starts or restarts the computer.
The program reads instructions from a storage device into the
computer’s memory.
bps: Bits per second. Typically used to describe the data transmission
speed of a modem.
buffer: The portion of the computer’s memory where data is temporarily
stored. Buffers often compensate for differences in the rate of flow
from one device to another.
bus: An interface for transmission of signals, data or electric power.
byte: The representation of a single character. A sequence of eight bits
treated as a single unit; also the smallest addressable unit within the
system.
C
cache memory: High speed memory which stores data that increases
processor speed and data transfer rate. When the CPU reads data
from main memory, it stores a copy of this data in cache memory.
The next time the CPU needs that same data, it looks for it in the
cache memory rather than the main memory, which saves time. The
computer has two cache levels. Level one is incorporated into the
processor and level two resides in external memory.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-2
Glossary
capacity: The amount of data that can be stored on a magnetic storage
device such as a floppy disk or hard disk. It is usually described in
terms of kilobytes (KB), where one KB = 1024 bytes and megabytes
(MB), where one MB = 1024 KB.
CD-ROM: A Compact Disc-Read Only Memory is a high capacity disc that
can be read from but not written to. The CD-ROM drive uses a laser,
rather than magnetic heads, to read data from the disc.
CD-R: A Compact Disc-Recordable disc can be written once and read
many times. See also CD-ROM.
CD-RW: A Compact Disc-Read/Write disc can be rewritten many times.
See also CD-ROM.
character: Any letter, number, punctuation mark, or symbol used by the
computer. Also synonymous with byte.
chip: A small semiconductor containing computer logic and circuitry for
processing, memory, input/output functions and controlling other
chips.
CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit
fabricated on a silicon wafer that requires very little power.
Integrated circuits implemented in CMOS technology can be tightly
packaged and are highly reliable.
compatibility: 1) The ability of one computer to accept and process data in
the same manner as another computer without modifying the data or
the media upon which it is being transferred.
2) the ability of one device to connect to or communicate with
another system or component.
components: Elements or parts (of a system) which make up the whole
(system).
configuration: The specific components in your system (such as the
terminal, printer, and disk drives) and the settings that define how
your system works. You use the HW Setup program to control your
system configuration.
control keys: A key or sequence of keys you enter from the keyboard to
initiate a particular function within a program.
controller: Built-in hardware and software that controls the functions of a
specific internal or peripheral device (e.g. keyboard controller).
CPU: Central Processing Unit. The portion of the computer that interprets
and executes instructions.
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a
fluorescent screen-producing luminous spots. An example is the
television set.
cursor: A small, blinking rectangle or line that indicates the current position
on the display screen.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-3
Glossary
D
DC: Direct Current. Electric current that flows in one direction. This type of
power is usually supplied by batteries.
default: The parameter value automatically selected by the system when
you or the program do not provide instructions. Also called a preset
value.
device driver: A program that controls communication between a specific
peripheral device and the computer. The CONFIG.SYS file contains
device drivers that MS-DOS loads when you turn the computer on.
dialog box: A window that accepts user input to make system settings or
record other information.
disk drive: The device that randomly accesses information on a disk and
copies it to the computer’s memory. It also writes data from memory
to the disk. To accomplish these tasks, the unit physically rotates the
disk at high speed past a read-write head.
display: A CRT, LCD, or other image producing device used to view
computer output.
DOS: Disk Operating System. See operating system.
driver: A software program, generally part of the operating system, that
controls a specific piece of hardware (frequently a peripheral device
such as a printer or mouse).
DVD-RAM: A Digital Versatile Disc Random Access Memory is a high-
capacity, high performance disc that lets you store large volumes of
data. The DVD-ROM drive uses a laser to read data from the disc.
DVD-ROM: A Digital Versatile Disc Read Only Memory is a high capacity,
high performance disc suitable for play back of video and other high-
density files. The DVD-ROM drive uses a laser to read data from the
disc.
E
execute: To interpret and execute an instruction.
F
floppy disk: A removable disk that stores magnetically encoded data.
floppy disk drive (FDD): An electromechanical device that reads and
writes to floppy disks.
folder: An icon in Windows used to store documents or other folders.
format: The process of readying a blank disk for its first use. Formatting
establishes the structure of the disk that the operating system
expects before it writes files or programs onto the disk.
function keys: The keys labeled F1 through F12 that tell the computer to
perform certain functions.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-4
Glossary
G
gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also
megabyte.
graphics: Drawings, pictures, or other images, such as charts or graphs, to
present information.
H
hard disk: A non-removable disk usually referred to as drive C. The factory
installs this disk and only a trained engineer can remove it for
servicing. Also called fixed disk.
hard disk drive (HDD): An electromechanical device that reads and writes
a hard disk. See also hard disk.
hertz: A unit of wave frequency that equals one cycle per second.
hot key: The computer’s feature in which certain keys in combination with
the extended function key, Fn, can be used to set system
parameters, such as speaker volume.
I
input: The data or instructions you provide to a computer, communication
device or other peripheral device from the keyboard or external or
internal storage devices. The data sent (or output) by the sending
computer is input for the receiving computer.
I/O: Input/output. Refers to acceptance and transfer of data to and from a
computer.
I/O devices: Equipment used to communicate with the computer and
transfer data to and from it.
J
jumper: A small clip or wire that allows you to change the hardware
characteristics by electrically connecting two points of a circuit.
K
K: Taken from the Greek word kilo, meaning 1000; often used as equivalent
th
to 1024, or 2 raised to the 10 power. See also byte and kilobyte.
KB: See kilobyte.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-5
Glossary
L
Light Emitting Diode (LED): A semiconductor device that emits light when
a current is applied.
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of
glass coated with transparent conducting material. The viewing-side
coating is etched into character forming segments with leads that
extend to the edge of the glass. Applying a voltage between the
glass sheets alters the brightness of the liquid crystal.
LSI: Large Scale Integration.
1) A technology that allows the inclusion of up to 100,000 simple
logic gates on a single chip.
2) An integrated circuit that uses large scale integration.
M
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also
kilobyte.
mode: A method of operation, for example, the boot mode, Sleep mode or
the hibernation mode.
modem: Derived from modulator/demodulator, a device that converts
(modulates) digital data for transmission over telephone lines and
then converts modulated data (demodulates) to digital format where
received.
monitor: A device that uses rows and columns of pixels to display
alphanumeric characters or graphic images. See also CRT.
MP3: An audio compression standard that enables high-quality
transmission and real-time playback of sound files.
N
numeric pad: A feature that allows you to perform numeric entry, or to
control cursor and page movement.
O
operating system: A group of programs that controls the basic operation
of a computer. Operating system functions include interpreting
programs, creating data files, and controlling the transmission and
receipt (input/output) of data to and from memory and peripheral
devices.
output: The results of a computer operation. Output commonly indicates
data.
1) printed on paper, 2) displayed at a terminal, 3) sent through the
serial port of internal modem, or 4) stored on some magnetic media.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-6
Glossary
P
parity: 1) The symmetrical relationship between two parameter values
(integers) both of which are either on or off; odd or even; 0 or 1.
2) In serial communications, an error detection bit that is added to a
group of data bits making the sum of the bits even or odd. Parity can
be set to none, odd, or even.
peripheral device: An I/O device that is external to the central processor
and/or main memory such as a printer or a mouse.
pixel: A picture element. The smallest dot that can be made on a display or
printer. Also called a pel.
plug and play: A capability with Windows that enables the system to
automatically recognize connections of external devices and make
the necessary configurations in the computer.
port: The electrical connection through which the computer sends and
receives data to and from devices or other computers.
prompt: A message the computer provides indicating it is ready for or
requires information or an action from you.
R
Random Access Memory (RAM): High speed memory within the
computer circuitry that can be read or written to.
restart: Resetting a computer without turning it off (also called "warm boot"
or "soft reset"). See also boot.
RJ11: A modular telephone jack.
RJ45: A modular LAN jack.
ROM: Read Only Memory: A nonvolatile memory chip manufactured to
contain information that controls the computer’s basic operation.
You cannot access or change information stored in ROM.
S
SCSI: Small Computer System Interface is an industry standard interface
for connection of a variety of peripheral devices.
soft key: Key combinations that emulate keys on the IBM keyboard,
change some configuration options, stop program execution, and
access the numeric pad.
stop bit: One or more bits of a byte that follow the transmitted character or
group codes in asynchronous serial communications.
system disk: A disk that has been formatted with an operating system. For
MS-DOS the operating system is contained in two hidden files and
the COMMAND.COM file. You can boot a computer using a system
disk. Also called an operating system disk.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-7
Glossary
T
terminal: A typewriter-like keyboard and CRT display screen connected to
the computer for data input/output.
TFT display: A liquid crystal display (LCD) made from an array of liquid
crystal cells using active-matrix technology with thin film transistor
(TFT) to drive each cell.
TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA
computer palm rest.
U
Universal Serial Bus: This serial interface lets you communicate with
several devices connected in a chain to a single port on the
computer.
V
VGA: Video Graphics Array is an industry standard video adaptor that lets
you run any popular software.
W
warm start: Restarting or resetting a computer without turning it off.
write protection: A method for protecting a floppy disk from accidental
erasure.
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary-8
|