Toshiba DVD Player HD A30KU User Manual

HD DVD player  
HD-A30KU  
HD-A30KC  
Owner’s manual  
In the spaces provided below, record the Model and Serial No. located on the rear panel of your player.  
Model No.  
Serial No.  
Retain this information for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric  
shock do not perform any servicing other than that contained in the operating instructions unless you are  
qualified to do so.  
Location of the required label  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Head all warnings.  
ADDITIONAL SAFETY INSTRUCTIONS  
15. Do not overload wall outlets; extension cords, or integral  
convenience receptacles as this can result in a risk of  
fire or electric shock.  
4. Follow all instructions.  
16. Never expose the apparatus to dripping or splashing or  
place items such as vases, aquariums, any other item  
filled with liquid, or candles on top of the unit.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
17. Keep your fingers well clear of the disc tray as it is  
closing. Neglecting to do so may cause serious personal  
injury.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
18. Do not place anything on top of this unit.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produces heat.  
19. Do not place the apparatus on amplifiers or equipment  
that may produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding-type plug has  
two blades and a third grounding prong. The wide blade  
or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult and  
electrician for replacement of the obsolete outlet.  
20. Never block or cover the slots or openings in the unit.  
Never place the unit:  
• on a bed, sofa, rug or similar surface;  
• too close to drapes, curtains, or walls; or  
• in a confined space such as a bookcase, built-in  
cabinet, or any other place with poor ventilation.  
The slots and openings are provided to protect the unit  
from overheating and to help maintain reliable operation.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
21. Do not use a cracked, deformed, or repaired disc. These  
discs are easily broken and may cause serious personal  
injury and apparatus malfunction.  
11. Only use attachments/accessories specified by the  
manufacturer.  
22. If the apparatus should emit smoke or an unusual odor,  
immediately disconnect the power cord from the wall  
outlet. Wait until the smoke or smell stops, then ask your  
dealer for a check and repair. Neglecting to do so may  
cause fire.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury  
from tip-over.  
23. During thunderstorms, do not touch the connecting  
cables or the apparatus.  
S3125A  
13. Unplug this apparatus during lightning storms or when  
unused for long period of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally,  
or has been dropped.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Notes on handling  
Playback restrictions  
• Never disconnect the power cord from a wall outlet while  
the player is turned on, unless it is in an emergency. Doing  
so may cause malfunction.  
• When shipping the player, the original shipping carton  
and packing materials come in handy. For maximum  
protection, repack the unit as it was originally packed at  
the factory.  
• Do not use volatile liquids, such as insect spray, near the  
player. Do not leave rubber or plastic products in contact  
with the player for a long time. They will leave marks on  
the finish.  
This owner’s manual explains the basic instructions for  
this player. Some HD DVD discs or DVD video discs  
are produced in a manner that allows specific or limited  
operation during playback. As such, the player may not  
respond to all operating commands. This is not a defect in  
the player. Please refer to the notes on compatible discs  
later in this Introduction and to the discussion of DVD  
playback and features later in this manual.  
“ ” may appear on the TV screen during operation. “ ”  
means that the operation is not permitted by the player or  
the disc.  
• The top and rear panels of the player may become warm  
after a long period of use. This is not a malfunction.  
About software  
Because of problems and errors that can occur during  
the creation of HD DVD, DVD and CD software and/or  
the manufacture of HD DVD, DVD and CD discs, Toshiba  
cannot assure that this player will successfully play every  
disc bearing the HD DVD, DVD or CD logos. If you happen  
to experience any difficulty playing an HD DVD, DVD or  
CD disc on this player, please contact Toshiba Customer  
Service.  
When not in use  
• For usual absence  
Be sure to remove the disc from the player and turn off the  
power.  
• Prolonged absence  
Unplug the player from a wall outlet. (This will stop the  
clock. Display “SETUP MENU” by pressing SETUP (  
page 30), and reset the clock.)  
Some differences  
Notes on locating  
The HD DVD player operates more like a computer and  
differently than a standard DVD player. In addition to  
containing a microprocessor, it contains an operating  
system, random access memory (RAM), and an HD DVD  
drive. The operating system includes software that is  
transferred to the RAM when the machine is turned on and  
at other times during operation. This transfer can take time.  
Therefore, when you turn the HD DVD player on, it may  
take a little while before it is ready to use. Likewise, other  
functions may not be performed as quickly as they would  
on other AV equipment. Please take these factors into  
consideration as you use the HD DVD player.  
• Place the player on a level surface. Do not use it on a  
shaky or unstable surface such as a wobbly table or  
inclined stand. The loaded disc may dislodge from its  
proper position and cause damage to the player. Before  
placing the player, make sure that the surface can stand  
the weight of the player. Never place the player in a high  
location to avoid damage to the product or person by an  
accidental fall of the player.  
• When you place this player near a TV, radio, or VCR, the  
playback picture may become poor and the sound may be  
distorted depending on the condition and location of said  
equipment. In such an event, place the player as far away  
as practical from the TV, radio, or VCR.  
• To avoid damage to this product, never place or store the  
unit in direct sunlight; hot, humid areas; or areas subject to  
excessive dust, oily smoke, cigarette smoke or vibration.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
• Do not use any type of solvent, such as thinner or benzine,  
as they may damage the surface of the player.  
About the volume level  
The volume level of some commercial HD DVD and DVD  
discs may seem lower than that of audio CDs, other  
software, etc. If you turn up the volume of the TV or amplifier  
to play such discs, be sure to turn it back down after  
playback finishes.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions (continued)  
Notes on moisture condensation  
Notes on copyright  
Moisture condensation damages the unit. Please read  
the following carefully.  
• The unauthorized recording, use, display, distribution, or  
revision of television programs, videotapes, HD DVDs,  
DVDs, CDs and other materials, is prohibited under the  
Copyright Laws of the United States and other countries,  
and may subject you to civil and/or criminal liability.  
• This product incorporates copyright protection technology  
that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision  
Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other  
Moisture condensation occurs, for example, when you pour  
a cold drink into a glass on a warm day. Drops of water  
form on the outside of the glass. In the same way, moisture  
may condense on the optical pick-up lens inside this unit,  
one of the most crucial internal parts of the unit.  
f
n
Optical pick-up  
lens  
limited viewing uses only unless otherwise authorized  
by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Moisture condensation occurs during the following  
cases.  
• When you bring the unit directly from a cold place to a  
warm place.  
Dolby and the double-D symbol are registered trademarks of  
Dolby Laboratories.  
• When you use the unit in a room where you just turned  
on the heater, or a place where the cool air from an air  
conditioner blows directly on the unit.  
• When the unit is moved from an air conditioned room to a  
hot, humid location.  
Manufactured under license from DTS, Inc. under one or more  
of the following U.S. Pat. No's: 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-  
wide patents issued and pending. "DTS" and "DTS Digital  
Surround" are registered trademarks of DTS, Inc. Copyright 1996,  
2002-2006, DTS, Inc. All Rights Reserved.  
• When you use the unit in a humid place.  
Do not use the unit when moisture condensation may  
occur.  
HDMI, the HDMI logo and High-Definition Multimedia Interface  
are trademarks or registered trademarks of HDMI Licensing LLC.  
If you use the unit in such a situation, it may damage discs  
and internal parts. Connect the power cord of the unit to the  
wall outlet, turn on the unit, remove the disc, and leave it  
for two or three hours. After two or three hours, the unit will  
have warmed up and evaporated any moisture. Keep the  
unit connected to the wall outlet and moisture condensation  
will seldom occur.  
SHARC and Melody are registered trademarks of Analog  
Devices, Inc.  
VRS is a trademark of Anchor Bay Technologies, Inc.  
and  
are trademarks of DVD Format/  
Wall outlet  
Logo Licensing Corporation.  
All other brand and product names mentioned in this manual  
are trademarks and/or registered trademarks of their respective  
holders.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Customizing the function settings.....................30  
Settings ................................................................. 31  
Picture ...................................................... 31  
Audio......................................................... 32  
Language .................................................. 32  
Ethernet .................................................... 34  
General .................................................... 34  
Firmware update ....................................... 35  
SAFETY PRECAUTIONS .......................................2  
IMPORTANT SAFETY INSTRUCTIONS ...............4  
Precautions ...........................................................5  
Table of contents...................................................7  
Features ................................................................. 8  
Disc compatibility........................................................ 8  
Customer support....................................................... 9  
Index to parts and controls ................................10  
Accessories .........................................................13  
Remote control ...................................................13  
Loading batteries...................................................... 13  
Before calling service personnel ......................36  
License information on the software used  
in the TOSHIBA HD DVD player.....................37  
Specification .......................................................43  
Limited United States Warranty .........................44  
Limited Canadian Warranty................................46  
Preparation...........................................................14  
Resolution and connection....................................... 14  
Step 1: Connecting to a TV ..................................... 15  
Step 2: Connecting to audio system............... ..........16  
Step 3: LAN connection............................................ 17  
Step 4: Power connection ....................................... 17  
Step 5: Powering on................................................. 18  
Step 6: Setting up the player.................................... 18  
A: Language.............................................. 18  
INFORMATION ON CUSTOMER  
SUPPORT .........................................Back cover  
B: Time...................................................... 19  
C: Resolution............................................. 20  
D: Audio output ......................................... 21  
E: Ethernet ................................................ 22  
Playing..................................................................24  
Playing a disc........................................................... 24  
To pause playback.................................... 25  
To stop playback ...................................... 25  
To resume playback from the location  
last stopped............................................... 25  
To change the playback speed. ................ 25  
To select the sound .................................. 26  
To select subtitles .................................... 26  
To select the camera angle....................... 26  
To locate a position .................................. 27  
To play repeatdly....................................... 27  
To check the current status....................... 27  
HD DVD playing options in the future....................... 28  
A/B/C/D buttons ........................................ 28  
Cursor controls.......................................... 28  
Controller port ........................................... 28  
Requirements for HD DVD discs/  
Web-enabled network content .................. 28  
Output sound conversion table .........................29  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Disc compatibility  
Discs which can be played on this player are as follows.  
The icons (  
discs.  
) are used in this manual to indicate features and/or functions that are applicable to various types of  
Disc  
Specification  
Prerecorded discs  
HD DVD video disc  
3
12cm (4 /4 in.)  
HD DVD video discs are high-density, high-capacity discs.  
• The HD DVD disc standard has been approved by the DVD forum.  
• HD DVD (single layer): 15 GB  
• HD DVD (dual layer): Maximum capacity of 30 GB  
HD DVD  
(
)
• A single layer single sided disc (15 GB) has capacity of about 8 hours in 1125 line high  
definition picture; about 48 hours in 525 line standard definition picture (depending on bitrate of  
pre-recorded contents).  
*1GB means 1,000,000,000 bytes.  
• HD DVD Twin Format Discs have both HD DVD and DVD layers on one side. HD DVD  
Combination Format Discs have HD DVD material on one side and DVD material on the other  
side.  
3
1
DVD video disc  
12cm (4 /4 in.) / 8cm (3 /4 in.)  
Region number 1 or ALL  
The region number of this HD DVD player is 1. If region numbers, corresponding to a specific playable  
area, are printed on your DVD video disc and you do not find “1” or “ALL”, or the disc is encoded to permit  
playback only in regions other than Region 1, disc playback will not be allowed by the player.  
DVD-Video  
(
)
3
1
Audio CD  
12cm (4 /4 in.) / 8cm (3 /4 in.)  
CD  
(
)
Recordable discs  
DVD-RW  
DVD VR mode recording  
(CPRM compatible discs  
supported.)  
DVD-R  
DVD VR mode recording  
(CPRM compatible discs  
supported.)  
DVD Video mode recording  
Finalized discs only.  
DVD Video mode recording  
Finalized discs only.  
DVD-RW  
DVD-R  
(
)
)
(
)
)
CD-RW  
CD-DA (audio CD) format  
Finalized discs only.  
CD-R  
CD-DA (audio CD) format  
Finalized discs only.  
CD  
CD  
(
(
Notes  
• This player can play pictures of the NTSC color system only.  
• You cannot play non-standardized discs even if they may be labeled as above.  
• Discs other than the above cannot be played. Even some of the above discs may not be able to be played depending on their state.  
• Blu-ray Discs cannot be played on this player.  
Notes on handling discs  
• Do not touch the playback side of the disc.  
• Do not stick paper or tape to discs.  
• Fingerprints and dust on the disc may cause picture and/or sound deterioration or prevent playback. Wipe the disc from the center outwards with  
a soft cloth. Always keep the disc clean.  
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the  
disc.  
• Refer to the instructions of the disc as well.  
• Do not store discs in a place subject to direct sunlight or near heat sources.  
• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.  
• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
HD output jacks  
Important notes about HD DVD  
HD DVD with high-definition content required for HD  
viewing. Viewing high-definition content and up-converting  
DVD content may require an HDCP capable DVI or HDMI  
input on your display device. Up-conversion of DVD content  
will result in near HD picture quality. Firmware update may  
be required for some interactive features depending on  
content, which may also require an always-on broadband  
internet connection. Some features may require additional  
bandwidth. Some recordable media may not be supported.  
Dolby Digital Plus, Dolby TrueHD and DTS support for up  
to 5.1 channels (DTS HD support for DTS core only). MP3/  
WMA audio files not supported. HDMI audio support for  
PCM only. Because HD DVD is a new format that makes  
use of new technologies, certain disc, digital connection  
and other compatibility and/or performance issues are  
possible. This may, in rare cases, include disc freezing while  
accessing certain disc features or functions, or certain parts  
of the disc not playing back or operating as fully intended.  
If you experience such issues, please refer to the FAQ  
com for information on possible work-around solutions or  
the availability of firmware updates that may resolve your  
problem, or contact Toshiba Customer Solutions. Some  
features subject to delayed availability. 1080p capable  
display required for 1080p output resolution. In some cases,  
the included remote control may not operate additional  
devices or certain features of such devices, in which case, it  
is suggested that you use the original remote control for the  
applicable device. Use of HDMI Control which is a feature  
based on HDMI-CEC requires an HDMI-CEC compatible  
display device. While every effort has been made at the  
time of publication to ensure the accuracy of the information  
provided herein, product specifications, configurations,  
system/component/options availability are all subject to  
change without notice.  
• An HDMI jack for connecting a single cable to output video  
and audio signals  
• Component jacks  
Certain system requirements  
For high definition video playback:  
• HD display (some discs may require HDCP capable input)  
• HD DVD disc with HD content  
For Dolby® Digital Plus and Dolby TrueHD multi-channel  
audio playback:  
• A/V Receiver with HDMI™ multi-channel LPCM capable  
audio input and 5.1 channel speaker setup.  
Customer support  
To reach Toshiba Customer Solutions in the U.S., please  
To reach Toshiba Customer Support in Canada, please  
support.  
Before accessing, try updating this player’s firmware. For  
details on how to update, see “Update (Firmware update)”  
(
page 35).  
This HD DVD player is manufactured under the HD DVD  
Format adopted by the DVD Forum. The DVD Forum  
approved AACS (Advance Access Content System)  
as content protection system for HD DVD format like it  
approved CSS (Content Scramble System) for DVD format.  
Therefore, certain restrictions are imposed on play, analog  
signal output, etc. of AACS protected contents.  
When you use pre-recorded contents, the contents may  
designate whether or not to apply such restrictions.  
As those restrictions may be adopted and/or changed and  
announced by AACS after the production of this product, the  
operation of this product and restrictions thereon may vary  
depending on the time you purchase this product as well as  
during the life of this product.  
To obtain updated information about AACS and this product,  
please contact the following:  
* In the U.S., please call 1 (800) 319-6684, or visit www.  
* In Canada, please call 1 (800) 268-3404 or visit www.  
toshiba.ca and click on support.  
Note  
• The firmware in this player can be updated. See  
details.  
page 35 for  
Notes on web-enabled network content  
Certain HD DVD discs may contain or have the capability of  
downloading studio-provided, web-enabled network content.  
To minimize any potential compatibility and/or connectivity  
issues, before viewing such content, it is recommended that  
you perform the firmware update process to ensure that  
your HD DVD player is using the latest firmware version.  
Do not unplug or turn off the player when downloading  
studio-provided, web-enabled network content. Doing so  
may cause data stored in the player’s persistent storage to  
be lost.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index to parts and controls  
Front panel  
1
2
3
4
5
6
7 8 9  
10 11  
No. Control  
Function  
Page  
18  
18  
11  
13  
ON/STANDBY button  
ON/STANDBY indicator  
Front panel display  
Remote sensor  
Turns the power on or restores the unit to the standby mode.  
Blue: power on / Red: standby mode  
See the next page.  
Receives infrared signals from the remote control.  
Loads a disc into the disc drive.  
1
2
3
4
5
6
Disc tray  
24  
28  
Extension port  
For future functions.  
Locates a chapter or track.  
/
(SKIP) buttons  
25  
7
: forward direction /  
: reverse direction  
(PAUSE) button  
(STOP) button  
(PLAY) button  
Stops playback momentarily.  
Stops playback.  
Starts playback.  
25  
25  
24  
24  
8
9
10  
11  
OPEN/CLOSE button  
Opens and closes the disc tray.  
Rear panel  
1
2
3 4  
5 6  
7
8
No. Control  
Function  
Connect the supplied power cord.  
Do not cover the ventilation holes.  
Use this to connect to a network with an always-on broadband connection.  
Outputs digital audio signals. Connect to a digital audio input on an amplifier  
equipped with digital audio decoder. When connecting the optional digital  
cable, fit the connector into the jack firmly.  
Page  
17  
AC IN socket  
Ventilation fan  
LAN port  
1
2
3
17  
DIGITAL AUDIO OUTPUT BITSTREAM/  
PCM OPTICAL jack  
16  
4
VIDEO OUTPUT jack  
Outputs video signals to a connected TV or amplifier.  
Outputs video signals to a connected TV or monitor.  
Connect to a TV or monitor equipped with component video jacks.  
Outputs video/audio signals to a connected TV, monitor or AV amplifier.  
Connect to a TV, monitor or AV amplifier equipped with HDMI input.  
Outputs audio signals to a connected TV or AV amplifier.  
15  
15  
5
6
COMPONENT VIDEO OUTPUT jacks  
HDMI OUTPUT jack  
15  
16  
7
8
ANALOG AUDIO OUTPUT jacks  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
1
7
9
11  
13 15 16 18  
12 14 17  
2 3  
4 5  
6
8
10  
19  
No. Function  
Displays the video output format currently selected.  
(i: interlaced, p: progresive)  
: Playing  
1
2
3
4
5
6
: Pausing  
: Fast forward playback  
: Fast reverse playback  
Shows a title number.  
HD DVD: An HD DVD is loaded.  
DVD: A DVD is loaded.  
7
A CD is loaded.  
8
9
A disc which contains advanced content is loaded.  
Total playing time is displayed.  
Remaining playing time is displayed.  
Shows a chapter number.  
Shows a track number.  
10  
11  
12  
13  
14  
15  
16  
17  
Multi channel sound is output.  
2ch sound is output.  
Playing a scene recorded with multi angles.  
Playing in repeat mode.  
HDMI connection is verified between the player and  
another device.  
18  
Displays the total playing time of the disc, elapsed  
time, remaining time, a number of title, chapter or track,  
messages, etc.  
19  
Pressing DIMMER button on the remote control changes the brightness of the display. (Normal / dimmed / off)  
• Turning off the power resets this setting.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
No. Function  
Page  
26  
To display subtitles.  
1
2
3
4
5
6
7
8
1
16  
24  
To open/close the disc tray.  
To select the sound.  
2
3
17  
18  
26  
24  
To display a top menu.  
18, 24  
25  
To select a content or position to enter.  
To resume playback while playing an HD DVD.  
To pause playback.  
4
5
19  
20  
25  
To start playback.  
24  
6
21  
To locate a title, chapter or track in the reverse  
direction.  
To play fast in reverse direction.  
To display a repeat mode menu.  
To set the 8 direction buttons to move the cursor  
during HD DVD playback.  
To operate as indicated by the video display during  
HD DVD playback.  
To enter numbers.  
For future functions which may become available by  
software update.  
To select a camera angle.  
To turn the power on or off.  
To display operating status.  
To display a menu included on many DVD video  
discs.  
27  
9
7
8
9
22  
23  
25  
27  
10  
11  
28  
12  
24  
25  
26  
10  
28  
27  
13  
14  
15  
11  
12  
27  
28  
29  
30  
26  
18  
27  
16  
17  
18  
13  
14  
15  
24  
19  
To enter a selected content.  
To return to the previous menu.  
To stop playback.  
18, 24  
18  
20  
21  
22  
23  
25  
To play fast in forward direction.  
25  
To locate a title, chapter or track in the forward  
direction.  
25  
24  
To play in slow motion.  
To play frame by frame.  
25  
25  
25  
26  
27  
28  
To display a window to locate a title, chapter or track. 27  
To clear entered information.  
To change the brightness of the display on the  
player.  
27  
11  
30  
29  
30  
To display the setup menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Remote control  
Supplied accessories  
Loading batteries  
Check that the following accessories are supplied.  
Open the cover and load  
batteries (AAA size).  
1
Make sure to match the + and  
– on the batteries to the marks  
inside the battery compartment.  
Remote control  
Batteries  
(AAA)  
Close the cover.  
2
Power cord  
Operating range  
Remote sensor  
Within about 7 m (23 ft)  
Notes  
• Do not drop or give the remote control a shock.  
• Do not leave the remote control near an extremely hot or humid  
place.  
• Do not spill water or put anything wet on the remote control.  
• Do not disassemble the remote control.  
• Dispose of batteries in a designated disposal area.  
• Batteries should always be disposed of with the environment in mind.  
• Always dispose of batteries in accordance with applicable laws and  
regulations.  
• If the remote control does not operate correctly, or if the operating  
range becomes reduced, replace all batteries with new ones.  
• When necessary to replace batteries in the remote control, always  
replace all batteries with new ones. Never mix battery types or use  
new and used batteries in combination.  
• Always remove batteries from remote control if they are dead or if the  
remote control is not be used for an extended period of time. This will  
prevent battery acid from leaking into the battery compartment.  
Caution  
Never throw batteries into a fire.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Proceed the following steps to set the player ready.  
Page 15  
Step 1: Connecting to a TV  
Page 16  
Page 17  
Page 17  
Page 18  
Page 18  
Step 2: Connecting to audio system  
Step 3: LAN connection  
Step 4: Power connection  
Step 5: Powering on  
Step 6: Setting up the player  
Resolution and connections  
Check the type of video input on your TV. To view high definition content, use the  
HDMI OUTPUT jack or the COMPONENT VIDEO OUTPUT jacks to connect to a TV.  
Some discs may require use of the HDMI OUTPUT jack.  
HDMI OUTPUT jack  
Resolution from this player  
Connection to this player  
HD (High Definition)  
SD (Standard Definition)  
Signal  
Cable  
Page  
15  
1080p 1080i  
720p  
480p  
480i  
TV input  
Video  
HDMI INPUT  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
HDMI cable  
Most  
recommended*  
Audio  
(16)  
15  
Video  
Audio  
Video  
Audio  
Component video cable  
Yes*  
Yes*  
Yes*  
Yes*  
Y
PB  
PR  
16  
Audio cable  
15  
Composite video cable  
No  
No  
No  
No  
Yes  
VIDEO  
16  
Audio cable  
* Some discs may prohibit output in this format. In this case, use the HDMI connection.  
*Why HDMI connection is most recommended?  
HD DVD and DVD video disc creators have the option to include copy protection instructions in their discs that prohibit the  
output of some standard video or high definition video (original 720p, 1080i or 1080p or up-converted 480i or 480p) from the  
COMPONENT VIDEO OUTPUT jacks. If such instructions are present in the disc you are playing, you must use the HDMI  
OUTPUT jack to view the disc in a high definition format and the COMPONENT VIDEO OUTPUT jacks, if activated, will  
output video only in 480i or 480p resolution.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 1: Connecting to a TV  
• Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination, video selector  
or AV amplifier, the playback picture may be distorted due to copy protection.  
• Be sure to turn off the power and unplug both units from the wall outlet before making any connections.  
Via HDMI input  
Notes  
To view 1080p output, make this connection.  
• When the HDMI connection is not verified, an error message appears  
HDMI transfers digital audio and uncompressed digital video on  
a single cable. As a result, audio cables and video cables don’t  
need to be connected separately to a device.  
on the front panel display. In this case, disconnect the HDMI cable  
then connect it again, or turn off the connected HDMI device then  
turn it on.  
• HDMI output is digital only, DVI analog is not supported.  
• HDMI is an evolving technology, so it is possible that some devices  
may not operate properly with this player.  
HDMI cable (not supplied)  
• To get the most possible benefit from Dolby Digital Plus, you should  
connect your HD DVD player to your AV receiver using its HDMI  
input. If your AV receiver has this type of input, make sure it is  
connected to your HD DVD player and that the input is set to use  
audio from HDMI (and not the SPDIF coaxial or optical input). If your  
AV receiver does not have an HDMI input, then the next best choice  
is to use the SPDIF (coaxial or optical) input on your AV receiver.  
• If you use the SPDIF optical output or analog outputs to connect  
your audio system and have the “Digital Out HDMI” ( page 21) set  
to “Auto” or “PCM”, the audio output level from these jacks will be  
reduced when listening to a multichannel disc. To restore the audio  
output level, set “Digital Out HDMI” to “Downmixed PCM”.  
HDMI INPUT  
To HDMI OUTPUT  
TV  
Depending on the TV connected, you can use the CEC  
function. For detail, see page 35.  
Via component video input  
Some discs may be down converted or require HDMI  
connection.  
Not compatible with 1080p. To view 1080p output, select HDMI  
connection.  
Component video cables  
(not supplied)  
To COMPONENT  
VIDEO OUTPUT  
Y
PB PR  
This connection only sends video signals. Be sure to make audio  
connection on page 16.  
TV  
Via VIDEO (yellow) input  
480i output only regardless of the resolution settings ( page 20)  
or the connections of other output jack.  
Composite video (yellow) cable  
(not supplied)  
To VIDEO OUTPUT  
This connection only sends video signals. Be sure to make audio  
connection on  
page 16.  
TV  
Note  
• This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict output of video  
on the component video ports when viewing high definition content or up-converted DVD content. The resolution on the HDMI output will be  
the same as the resolution output on the component video output. Thus, because the HDMI output can change automatically to match the  
maximum available resolution of your display, if you connect both the HDMI output and component output, the resolution on the component  
output will change if the HDMI output auto-adjusts.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation (continued)  
Step 2: Connecting to audio system  
Sound can output from connected audio system.  
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.  
Via HDMI output  
You can enjoy the benefits of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your player  
to an AV receiver with an HDMI audio input.  
This connection requires selection of “Digital Out HDMI” (Step 16, page 21).  
Caution  
HDMI cable  
(not supplied)  
HDMI cable  
(not supplied)  
• When you are connecting (via the HDMI  
OUTPUT jack) an AV decoder that does not have  
Dolby Digital or DTS decoding capability, be sure  
to set “Digital Out HDMI” ( page 21) to “PCM”  
or “Downmixed PCM”. Otherwise, high volume  
sound may damage your hearing as well as the  
speakers.  
HDMI INPUT  
HDMI OUTPUT  
HDMI INPUT  
To HDMI OUTPUT  
Note  
AV amplifier  
• You may need to adjust the HDMI audio output  
to match the capabilities of your AV amplifier. In  
this case, set “Digital Out HDMI” ( page 21) to  
“PCM”.  
HDMI compatible  
device  
Via optical digital audio output  
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a receiver  
with Dolby Digital and DTS decoding capabilities and an optical digital input.  
This connection requires selection of “Digital Out SPDIF” (Step 16, page 21).  
Optical digital cable (not supplied)  
*To use the optical digital output, use an  
optical cable to connect this jack to an optical  
audio input on a device capable of processing  
Dolby Digital, DTS bitstream, or PCM audio.  
To DIGITAL AUDIO OUTPUT  
BITSTREAM/PCM OPTICAL  
DIGITAL INPUT  
OPTICAL  
AV amplifier  
Via analog audio output  
Sound is output only in 2ch format.  
Audio cable (not supplied)  
TV  
To ANALOG  
AUDIO OUTPUT  
ANALOG AUDIO  
INPUT  
AV amplifier  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3: LAN connection  
You may use the internet connection feature to update the player’s firmware. See page 35.  
Some HD DVD discs may enable you to access special HD DVD sites, if you connect the player to the Internet via an  
always-on broadband connection. For example, if an HD DVD site includes content such as links to future movie trailers, you  
can watch the content on the player via the Internet. You do not need to connect to a PC to use this function.  
Read the notes on page 28 as well.  
Broadband modem  
Connect either.  
(with integrated router)  
Use a commercially available straight LAN cable  
(Category 5/CAT5 or better with RJ45 connector).  
Press down to remove  
Lock portion  
Broadband  
service  
Plug  
Broadband modem  
Router  
Caution  
• When plugging or unplugging the LAN cable, hold the plug portion of  
the cable.  
• When unplugging, do not pull on the LAN cable but unplug while  
pressing down on the lock.  
• Do not connect a modular phone cable to the LAN port.  
• Since there are various connection configurations, please follow the  
specifications of your telecommunication carrier or internet service  
provider.  
Broadband  
service  
Note  
• Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable  
terms of service. For details, contact your ISP.  
Step 4: Power connection  
After completing all connections, connect the supplied power cord to the AC IN socket and a wall outlet.  
ON/STANDBY indicator on the player illuminates in red.  
Caution  
ON/STANDBY indicator  
• Do not power this player using any power cord other than the one  
supplied with this player.  
• Do not use the supplied power cord with any device other than this  
player.  
To a wall outlet  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation (continued)  
Step 5: Powering on  
Turn on the TV or monitor, and select the input When the power turns on, ON/STANDBY indicator on the  
1
front panel changes color from red (standby mode) to blue  
(operation).  
which the player is connected to.  
Press ON/STANDBY.  
2
Start up (and disc loading ( page 24)) may take time.  
When you power on this player for the first time, the setting  
menu will appear. Go to Step 6 to make the necessary  
setup.  
ON/STANDBY button  
ON/STANDBY button  
To power off the player  
Press ON/STANDBY.  
ON/STANDBY indicator  
Step 6: Setting up the player  
Make the settings which are necessary to operate the player.  
Make sure that the following menu is displayed.  
(If not, press SETUP to display it.)  
1
To move a cursor  
To enter the  
SETUP MENU  
selected item  
Picture  
Audio  
Language  
Ethernet  
General  
A: Language  
To return to the  
previous menu  
Press  
/
to select “Language”, then press OK.  
2
To input digits  
SETUP MENU  
Disc Menu Language  
Subtitle Language  
Audio Language  
English  
Picture  
Audio  
None  
English  
English  
Language  
Ethernet  
General  
On Screen Language  
Start  
To display the  
setting menu  
Press  
/
to select “On Screen Language”, then press OK.  
3
On Screen Language  
English  
Disc Menu Language  
Subtitle Language  
Audio Language  
English  
French  
None  
German  
English  
Spanish  
On Screen Language  
English  
Italian  
Press  
then press OK.  
/
to select the language you want use for on-screen displays,  
4
5
Press RETURN or to return to the menu of step 1.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B:Time  
Press  
OK.  
/
to select “General”, then press  
Press RETURN or to return to the menu of  
10  
step 1.  
6
Parental Lock  
Clock Set  
Off  
Off  
Off  
Off  
Off  
Off  
ETUP MENU  
OSD On/Off  
Picture  
Audio  
Remote Controller Sound  
HDMI Control  
Screen Saver  
Maintenance  
Language  
Ethernet  
General  
Twin Format Disc  
HD DVD  
Press  
OK.  
/
to select “Clock Set”, then press  
7
Confirm the time is correct.  
8
9
If the time is correct, select “OK” by / ,  
then press OK to return to the menu of step 2.  
When the time needs to be corrected, set each item using the  
following buttons.  
After setting this item, press  
.
Cock Set  
Time Zone (GMT-4:00)Atlantic Time  
Year  
Month  
Date  
2007  
00  
To correct the digit,  
select the item again  
00  
by  
/
then input a  
Time  
:
:
00 00 00 AM  
new digit.  
OK Cancel  
After setting this, press  
then to select ìOK then  
press OK button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation (continued)  
C: Resolution  
Press  
/
to select “Picture”, then press OK.  
11  
SETUP MENU  
Picture  
TV Shape  
16:9  
Off  
Audio  
Enhanced Black Level  
Language  
Ethernet  
RGB Output Range  
Standard  
Auto  
General  
Picture Mode  
Resolution Setting  
up to 1080i  
Press  
/
/
to select “Resolution Setting”, then press OK.  
12  
13  
Press  
below, then press OK.  
to select the resolution according to the performance of your TV as shown in the table  
TV input  
HDMI input  
“Resolution Setting”  
480i  
e.g.  
Select the resolution.  
up to 480p  
up to 720p  
up to 1080i  
up to 1080p  
up to 1080p/24Hz  
HDMI INPUT  
e.g.  
Select the resolution  
(except uì p to 1080p ”  
and up to 1080p/  
24Hz) according to  
the performance of  
the connected TV.  
480i  
up to 480p  
up to 720p  
up to 1080i  
up to 1080p  
up to 1080p/24Hz  
Component video  
input  
1080i  
TV  
VIDEO (yellow) input  
Select any resolution except up to 1080p/24Hz”.  
You may find that setting the output resolution of the player to match as closely as possible the native resolution of your  
display provides the best picture performance (e.g., 720p for 720p and 1080p for 1080p).  
Note  
• In case the menu of “Resolution Setting” disappears, make composite video (yellow) connection to restore it, then select the  
resolution which is compatible with the connected TV.  
HD DVD DVD-Video  
For best view of movie material (24p output)  
Movie films are traditionally captured at 24 frames per second and this player can maintain this frame rate allowing you to  
enjoy in their native form. Connect a 1080p/24Hz compatible TV and select “up to 1080p/24Hz”.  
Note  
• Most film based HD DVDs display images at 24 frames per second and video based HD DVDs display images at 30 frames or  
60 fields per second. Depending on the content, “up to 1080p/24Hz” may lower smoothness of playback and/or reduce vertical  
resolution. In the case of video based HD DVDs, we recommend that the output resolution setting is changed from “up to  
1080p/24Hz”.  
Press RETURN or to return to the menu of step 1.  
14  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D: Audio output  
Press  
/
to select “Audio”, then press OK.  
15  
SETUP MENU  
Picture  
Digital Out SPDIF  
Bitstream  
Auto  
Audio  
Digital Out HDMI  
Language  
Ethernet  
Dynamic Range Control  
Auto  
General  
Dialog Enhancement  
Off  
When you connected an audio system to the BITSTREAM/PCM jack ( page 16):  
16  
Press  
/
to select “Digital Out SPDIF”, then press OK.  
Select one of the followings according to your connection, and press OK.  
Bitstream  
When an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG  
decoder is connected to this player.  
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is  
output. When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream. If  
the AV receiver or processor does not support DTS, select “PCM”.  
Digital Ot SPDIF  
Bitstream  
PCM  
PCM  
When a 2ch digital stereo amplifier is connected to this player.  
When you play an HD DVD or DVD video disc recorded in Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS or DTS-HD format, sound is converted into PCM (2ch) format.  
When you connected an HDMI device to the HDMI OUTPUT jack ( page 15, 16):  
Press  
/
to select “Digital Out HDMI”, then press OK.  
Select one of the followings according to your connection, and press OK.  
Auto  
When an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or linear PCM  
decoder is connected to this player.  
When you play a disc recorded in Dolby Digital Plus, Dolby TrueHD or DTS-HD, PCM is output (core only  
for DTS-HD).  
Digital ut HDMI  
When you play a disc recorded in Dolby Digital or DTS format, digital audio signal (bitstream audio) is  
output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is converted  
into linear PCM to output.  
Auto  
PCM  
Downmixed PCM  
PCM  
When an HDMI device which has multi channel input is connected to this player.  
When you play an HD DVD or DVD video disc recorded in multi channel in Dolby Digital, Dolby Digital  
Plus, Dolby TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi channel in linear  
PCM format.  
Downmixed PCM  
When a 2ch digital stereo AV receiver or processor is connected to this player.  
When you play a DVD video disc recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is  
converted into PCM (2ch) format to output.  
Note  
• Setting “Auto” or “PCM” will reduce output level of multi channel sound from the ANALOG AUDIO OUTPUT  
jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:  
– view the playback picture on an HDMI TV connected to this player.  
– play an HD DVD video disc of a certain type, recorded in linear PCM format.  
In this case, the output level will be restored by setting to “Downmixed PCM”.  
Press RETURN or to return to the menu of step 1.  
17  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation (continued)  
E: Ethernet  
Perform this setting if you connect the player to your LAN ( page 17).  
After performing this setting, you need to turn off this player and turn it on again to activate this setting.  
If you do not connect, skip to Step 20.  
Press  
Press  
/
/
to select “Ethernet”, then press OK.  
18  
19  
to select each of the followings, then press OK.  
DHCP  
Off  
To set your network information.  
1
2
Proxy Setting  
Mac Address  
NTP Server  
Off  
Off  
To input proxy server address (when your provider requires the setting).  
To display the Mac address of the player. (Fixed. No need to set.)  
To adjust the players clock via the network time protocol.  
To select the speed according to the specification of your LAN.  
To select whether you access Cookiesor not.  
Off  
Network Speed  
56kbps Modem  
Accept  
3
4
5
Cookie Setting  
1
2
Proxy Setting  
DHCP  
Enter the proxy server address when your provider  
requires proxy setting.  
DHCP  
On  
1 Set “DHCP” to “On” and  
press OK button.  
The network information is  
automatically set.  
Off  
0
DHCP  
IP Address  
0
0
0
.
.
.
0
0
0
.
.
.
.
.
.
0
0
0
Proxy Setting  
Subnet Mask  
0
1 Set “Proxy” to “On” and  
On  
Off  
Proxy  
Server  
Port  
Gateway  
press OK button.  
0
Skipped when DHCP”  
is set to On”.  
2 Set “DNS” to “On” and  
press OK button.  
The DNS server is obtained  
automatically from the  
DHCP server.  
0
2 Enter the specified data  
from the provider.  
OK  
Cancel  
Gateway  
DNS  
0
.
On  
.
0
.
0
Off  
0
.
.
0
0
Refer to the instructions  
below for inputting  
characters. (Server, Port)  
3 Select “OK” and press  
OK button.  
DNS Server  
0
0
.
Confirm  
OK Cancel  
3 Select “Confirm”, then  
press OK button.  
Confirming starts.  
If the setup is successful,  
an IP address appears.  
Press OK button.  
Skipped when DNS”  
is set to On”.  
How to input characters  
To begin or finish input.  
OK button  
buttons  
buttons  
CLEAR button  
/
To select a character.  
If the setup is not successful:  
To move to the next character.  
To erase to correct.  
/
DHCP  
a) Set “DHCP” to “Off” and  
press OK button.  
The network information is  
automatically set.  
On  
Off  
1
DHCP  
IP Address  
192 . 168 .  
.
15  
0
Number buttons To input a number.  
Subnet Mask  
255 . 255 . 255 .  
Gateway  
192 . 168 .  
On  
1
Off  
1
.
.
1
DNS  
DNS Server  
192 . 168 .  
Confirm  
1
3
NTP Server  
b) Input the addresses using the number buttons.  
IP Address”  
This sets a different address within the  
NTP Server  
same subnet of the PC on your network.  
e.g. if the IP address of the PC is  
192.168.1.10, set 192.168.1.15 (or some  
other unused address.)  
On  
Off  
Select “On” or “Off” and press OK  
button.  
On”  
The player automatically  
accesses an internet server  
to adjust time protocol.  
Subnet MaskThis sets the subnet mask of the network  
environment that will be connected.  
e.g.: 255.255.255.0  
Off”  
The player does not access  
an internet server  
Gateway”  
This sets the gateway used by the player  
(e.g.: 192.168.1.1).  
to adjust its clock.  
DNS Server”  
This sets the DNS server to be used by the  
player (e.g.: 192.168.1.1).  
c) Select “OK” and press OK button.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
Network Speed  
Cookie Setting  
Cookie Setting  
Accept  
Network Speed  
Select the speed and  
Select Acceptor Not Accept”  
28.8kbps Modem  
33.6kbps Modem  
64kbps ISDN  
press OK button.  
and press OK button.  
Not Accept  
56kbps Modem  
128kbps ISDN  
Accept”  
Cookies are accepted.  
256kbps DSL/Cable  
For other speeds:  
1 Select “Otherand  
384kbps DSL/Cable 512kbps DSL/Cable  
press OK button.  
768kbps DSL/Cable  
1.5Mbps T1  
Other  
1Mbps Cable  
Over 10Mbps  
Not AcceptCookies are rejected.  
This may disable  
Network Speed (Other)  
some services on  
1
kbps  
web pages.  
OK  
Cancel  
2 Specify the speed by  
number buttons.  
3 Select OKand  
press OK button.  
Press RETURN or to return to the menu of step 1.  
Press SETUP to close the menu.  
20  
21  
22  
If you made the LAN setting (“E: Ethernet”, page 22), press ON/STANDBY to turn the player off,  
then press the button again to turn it on.  
Your player is ready.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing  
Preparation  
• Turn on the TV or audio system and select the corresponding input source that the player is connected to.  
• Turn the power on. ( page 18)  
Playing a disc  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
3 1  
Press OPEN/CLOSE to open the disc tray.  
1
2
Place a disc in the hollow of the disc tray  
with the playback side down.  
1
MENU  
OK  
When using a double-sided  
disc, turn the label of the  
playing side up.  
/
/
/
3
After placing a disc, press OPEN/CLOSE.  
3
Playback starts.  
If playback does not start, press (PLAY).  
HD DVD DVD-Video  
If a loaded disc contains a top menu, a top menu appears when you start playback.  
Select a title by (or number buttons), then press OK.  
/
/
/
Playback starts from chapter 1 of the selected title.  
• Depending on the disc, you may need to press TOP MENU or MENU to display a top menu.  
DVD-RW  
DVD-R  
Discs recorded on personal devices such as DVD recorders may contain menus, on which items can be  
easily selected.  
Press MENU, and select a title by  
/
/
/
, then press OK.  
Playback starts from the selected item.  
• Discs recorded in DVD VR mode display the recorded contents not in thumbnails but in a list. Select an item on the list  
and press OK button.  
Notes  
• Use the button on the front panel or the remote control to open and close the disc tray. Do not push or hold the disc tray while it is moving.  
Doing so may cause the player to malfunction.  
• Do not load a disc which is unplayable, or any object other than a playable disc.  
• Do not apply downforce to the disc tray. Doing so may cause the player to malfunction.  
• If the disc tray stops while closing, the mechanical protection system of this player will open it. Do not force it to close. Doing so may  
damage the disc tray.  
• If the disc tray will not open, turn the player off, and press OPEN/CLOSE on the front panel. This may turn the player on and open the disc  
tray. If it still won’t open, contact TOSHIBA Customer Support.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To pause playback  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Press (PAUSE).  
To resume press (PLAY).  
TOP MENU  
To stop playback  
RESUME  
PLAY  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Press (STOP).  
PAUSE  
/
/
To resume playback from the location last stopped  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
HD DVD  
DVD-Video  
After stopping playback, press RESUME PLAY (  
) or (PLAY) (  
DVD-RW  
DVD-R  
CD  
).  
If you want to return to the beginning, press (STOP), then press (PLAY).  
SLOW  
STOP  
Notes  
• Pressing (PLAY) after stopping playback then turning the power off may also resume playback from  
the location last stopped.  
• Resume feature cannot function when:  
- you select a disc menu language ( page 32) or change the parental lock setting ( page 34).  
- you open the disc tray.  
• There may be a difference in the location where playback resumes depending on the disc.  
• It is possible to change the setting from the setup menu while the player retains a location in memory,  
however, the new setting can be valid only after the player clears the location memory, i.e., starts resume  
playback.  
• Some discs or scenes may not permit this operation.  
• While the ADV indicator on the front panel illuminates, this feature is not available.  
To change playback speed  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Button  
Function  
Operation  
To cancel  
Fast reverse playback  
Fast forward playback  
Playing in slow-motion  
Playing frame by frame  
Pressing this button repeatedly changes PLAY  
the playback speed.  
Pressing this button repeatedly changes PLAY  
the playback speed.  
Pressing this button repeatedly changes PLAY  
the playback speed.  
SLOW*  
**  
1 Press  
to pause playback.  
PLAY  
2 Press this button repeatedly.  
To skip to the next  
chapter/track  
To return to the previous Pressing this button once locates the  
Press this button once.  
chapter/track  
beginning of the current chapter or  
track.  
Pressing this button twice locates the  
beginning of the previous chapter or  
track.  
TOP MENU To display a top menu  
1 Press this button.  
2 Press / / / to select a title.  
3 Press OK.  
TOP MENU  
* Not available in CD playback.  
** Some discs may not permit this operation.  
Note  
• If the player freezes for about 15 minutes or more and will not respond to any buttons, holding down ON/STANDBY button on the front panel  
for about 10 seconds can force the player to turn off. However, this is an emergency measure, which may cause damage to the player. Avoid  
casual use of this measure.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing (continued)  
To select subtitles  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
You can display subtitles on the TV and select a subtitle  
language from those included on the disc.  
AUDIO  
During playback, press SUBTITLE.  
The current subtitle setting appears. (except for some HD  
DVD discs)  
1
SUBTITLE  
ANGLE  
e.g.  
Subtitle  
English 1  
DISPLAY  
A language code ( page 33) may appear.  
Each time you press  
“On” to view subtitles.  
/
, “On” and “Off” alternates. Select  
Press SUBTITLE while the subtitle setting is  
displayed on the TV screen.  
2
T.SEARCH  
Subtitle languages which do not appear in the setting are not  
included in the disc.  
Number buttons  
Notes  
• Some discs are set to display subtitles automatically.  
• Depending on the scene, subtitles may not appear immediately after  
you set the subtitle function to on.  
• Some discs will allow you to change subtitle languages and turn  
subtitles on or off only via the disc menu.  
CLEAR  
• When you turn on the player or replace a disc, the player returns to  
the initial default setting ( page 33). Depending on a disc, a specific  
type of subtitles the disc has is output.  
• Depending on the scene, the subtitle language may not change  
immediately after selected.  
To select the camera angle  
To select the sound  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
If the scene was recorded with multiple angles, you can  
easily change the camera angle of the scene you are  
watching.  
If a disc contains several languages, you can select a  
preferred language from them to hear.  
While playing a scene recorded with multiple  
During playback, press AUDIO.  
The current audio setting appears. (except for some HD DVD  
discs)  
1
1
angles (angle icon (  
) displayed on the TV  
and the front panel), press ANGLE.  
The current angle setting appears. (except for some HD DVD  
discs)  
e.g.  
Audio  
English 1  
e.g.  
Number of angles in the  
current title  
A language code ( page 33) may appear.  
Angle  
1 / 6  
Press AUDIO while the audio setting is  
displayed on the TV screen.  
2
Angle number  
While the angle number is displayed, press  
ANGLE repeatedly to select the angle number.  
Notes  
2
• Some discs allow you to change audio selections only via the  
disc menu. If this is the case, press MENU button and choose the  
appropriate language from the selections on the disc menu.  
• When you turn on the player or replace a disc, the player returns to  
the initial default setting ( page 33). Depending on a disc, a specific  
type of audio the disc has is output.  
Notes  
• You can also change the camera angle during still playback. The  
camera angle changes to the new setting when you resume normal  
playback.  
• If you pause a picture immediately after changing a camera angle,  
the resumed playback picture may not display the new camera angle.  
• Immediately after you have switched audio output modes, there may  
be a temporary discrepancy between the display and actual sound.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press OK.  
Repeat playback starts.  
To locate a position  
3
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Notes  
Press T.SEARCH repeatedly to select the  
category.  
• Some discs may not permit repeat playback operation.  
1
• You can cancel repeat playback also by pressing  
.
Category  
Title  
To search by specifying:  
Title number  
Chapter  
Time  
Track  
Chapter number  
Elapsed time of the current title (track)  
Track number  
To check the current status  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Press the number buttons to enter a number.  
e.g. To enter 25:  
2
Press DISPLAY.  
The following on-screen display appears.  
1
“2”  
e.g. To enter 1 hour, 25 minutes, and 30 seconds:  
“1” “2” “5” “3” “0”  
“5”  
CD  
HD DVD DVD-Video DVD-RW  
DVD-R  
Chapter number  
Ttle number  
e.g.  
Pressing CLEAR resets the numbers.  
Elapsed time of a title  
Elapsed time of a chapter  
Title  
002 00:19:13  
0003 00:00:28  
Chapter  
Press OK.  
3
Video Codec: MPEG4AVC  
Audio: English 1  
Video codec  
Playback starts from the specified location.  
Language setting  
Subtitle setting  
Angle number  
Subtitle: None  
Notes  
Angle: 1/1  
• Some discs may not permit these operations.  
• While the ADV indicator on the front panel illuminates, these features  
are not available.  
Video Output: 1080i  
Audio Output: Digital Bitstream  
Definition  
Sound output setting  
CD  
Track number  
Elapsed time of a track  
Total time of a track  
To play repeatedly  
e.g.  
CD PLAYER  
TRACK 002 00:03:12 / 00:05:16  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Press REPEAT.  
The repeat modes are listed.  
(The selections on the list vary depending on category or  
status of a disc.)  
1
2
Press  
/
to select the repeat mode.  
After confirming, press DISPLAY to turn off  
the display.  
2
Mode  
All Repeat  
Title Repeat  
To repeat:  
Entire disc  
Current title  
Chapter Repeat  
Track Repeat  
Disc Repeat  
A-B Repeat  
Current chapter  
Current track  
Entire disc  
You can specify a segment to repeat.  
Select this and press OK.  
A B Repeat  
A Point  
” appears.  
Perform steps 1) and 2) below, and  
skip step 3.  
1) While the above display appears,  
press OK at a start point of a  
segment where you want to repeat.  
The display changes to  
A B Repeat  
B Point  
To cancel the setting, press RETURN.  
2) Press OK at an end point of a  
segment where you want to repeat.  
Playback returns to the point A and  
repeats between A and B.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing (continued)  
HD DVD playing options in the future  
A/B/C/D buttons  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Use these buttons as indicated by the video display during HD DVD disc playback.  
Depending on the disc contents, the functions of each button may differ.  
Cursor controls  
HD DVD  
DVD-Video DVD-RW  
DVD-R  
CD  
Future HD DVD discs may include game software and drawing software. If they do you  
can use the cursor function for some software.  
CURSOR  
A/B/C/D  
Press CURSOR while a disc with support for cursor use is playing.  
1
2
Use the eight direction buttons to move the cursor.  
Move the cursor to select the game target or selection item. For details on actual operations,  
also refer to the operations guide for the disc.  
Controller port  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Extension port  
The extension port may be used in the future for additional control options.  
Requirements for HD DVD discs/Web-enabled network content  
• An always-on broadband internet connection  
• An HD DVD disc containing or having the capability of downloading studio-provided, web-enabled network content.  
Notes  
• To minimize any potential compatibility and/or connectivity issues, before attempting to view any studio-provided web-enabled, network content,  
it is recommended that you perform the firmware update process to ensure that your HD DVD player is using the latest firmware version.  
• Toshiba is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions  
associated with your broadband internet connection, or other connected equipment.  
• Toshiba is not responsible for any trouble in your internet connection.  
• If you wish to use a wireless network to connect the player, you will need to use a wireless LAN ethernet adapter to connect the player to the  
network.  
• The features of HD DVD discs made available through the Internet Connection feature are not created or provided by Toshiba, and Toshiba  
is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be  
compatible with this player. If you have questions about such content, please contact the producer of the disc.  
• Some internet contents may require a higher bandwidth connection.  
• Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the  
quality or bandwidth of your internet service, problems at the provider of the content or compatibility issues.  
• Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your  
broadband Internet connection.  
• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.  
• A 10 Base-T or 100 Base-TX LAN port is required for connection to this player. If your internet service does not allow for such a connection, you  
will not be able to connect the player.  
• A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method  
of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be  
limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed  
to connect when a PC is already connected.)  
• The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact  
your ISP directly.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Output sound conversion table  
“Digital Out SPDIF”  
“Digital Out HDMI”  
PCM2  
ADV  
indicator  
Disc  
Audio format  
Bitstream  
PCM  
Auto  
Downmixed PCM  
2ch PCM1  
DD Plus/Dolby  
TrueHD  
dts-HD/L-PCM  
DD plus  
Dolby Bitstream  
2ch PCM  
Depend on HDMI receiver up to 5.1ch PCM3  
HD DVD Video  
Advanced  
content  
ADV  
DTS Bitstream  
Bitstream  
48kHz Dolby Bitstream  
96kHz Dolby Bitstream  
192kHz Dolby Bitstream  
Bitstream  
48kHz DTS Bitstream  
96kHz DTS Bitstream  
192kHz DTS Bitstream  
Bitstream  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
Depend on HDMI receiver up to 5.1ch PCM2  
Depend on HDMI receiver up to 5.1ch PCM  
Depend on HDMI receiver up to 5.1ch PCM  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM1  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
True HD  
Depend on HDMI receiver  
2ch PCM1  
HD DVD Video  
Standard content  
dts-HD  
L-PCM  
Depend on HDMI receiver up to 5.1ch PCM2  
Depend on HDMI receiver up to 5.1ch PCM  
Depend on HDMI receiver up to 5.1ch PCM3  
(off)  
Depend on HDMI receiver  
Depend on HDMI receiver  
Depend on HDMI receiver up to 5.1ch PCM  
2ch PCM3  
2ch PCM  
MPEG  
DD  
L-PCM  
Bitstream  
48kHz  
96kHz  
2ch PCM  
2ch PCM1  
Bitstream  
Bitstream  
2ch PCM  
Bitstream  
Bitstream  
2ch PCM  
Bitstream  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM3  
DVD-Video  
(off)  
dts  
Depend on HDMI receiver up to 5.1ch PCM  
Depend on HDMI receiver  
2ch PCM  
Depend on HDMI receiver up to 5.1ch PCM  
Depend on HDMI receiver  
2ch PCM  
MPEG  
L-PCM  
dts  
DD  
L-PCM  
MPEG  
2ch PCM  
2ch PCM  
44.1kHz  
44.1kHz  
CD  
(off)  
(off)  
2ch PCM  
2ch PCM  
2ch PCM  
DVD-VR  
Depend on HDMI receiver  
1: Downsampled PCM.  
2: Up to 5.1 channel PCM audio output is possible only when the connected device supports multi channel output.  
3: This output format is possible when the resolution setting is “720p”, “1080i” or “1080p”. When the resolution setting is set to “480p”, this output  
format depends on HDMI receiver.  
Notes  
• The main title content of most movie HD DVD discs is “advanced content”. The player turns on the ADV indicator when an HD DVD disc which  
includes such content is loaded.  
• The BITSTREAM/PCM jack may not output sound you select. In this instance, set “Digital Out SPDIF” to “PCM”.  
• The ANALOG AUDIO OUTPUT jacks always output 2ch sound only.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the function settings  
You can change the default settings to customize performance to your preference.  
During stop, press SETUP.  
1
“SETUP MENU” appears.  
Press  
OK.  
/
to select the group that contains a desired item, then press  
2
OK  
/
Press  
/
to select the setting item, then press OK.  
3
4
Refer to the explanations on pages beginning from 31, to change the  
selection by or other buttons, then press OK.  
/
To return to the  
previous menu  
Repeat step 3 and 4 to set other items if necessary.  
5
6
Press SETUP.  
“SETUP MENU” disappears and the setting is completed.  
SETUP  
Group  
Setting  
Disc  
Details  
Page  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
DVD-R  
DVD-R  
DVD-R  
DVD-R  
CD  
CD  
Picture  
TV Shape  
To select a picture size according to the aspect  
ratio of your TV.  
31  
Enhanced Black  
Level  
To select the black level (0 IRE or 7.5 IRE).  
31  
CD  
CD  
RGB Output Range  
To select the RGB range according to the capacity 31  
of the connected DVI monitor.  
Picture Mode  
To select the system of output signal  
corresponding to playback source. (Only when  
connected to a PROGRESSIVE TV.)  
32  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
DVD-R  
DVD-R  
DVD-R  
DVD-R  
CD  
CD  
CD  
CD  
Resolution Setting  
Digital Out SPDIF  
Digital Out HDMI  
To select the resolution of the player’s output,  
according to the connected TV.  
20  
Audio  
To select the output sound format when connecting 21  
the DIGITAL AUDIO OUTPUT jack.  
To select the output sound format when connecting 21  
the HDMI OUTPUT jack.  
Dynamic Range  
Control  
To turn on or off a function that makes faint sounds 32  
easier to hear even if you lower the volume during  
late-hour playback.  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Dialog Enhancement  
To turn on or off a function that increases dialog  
volume of a disc playback.  
32  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
DVD-R  
DVD-R  
DVD-R  
DVD-R  
CD  
CD  
CD  
CD  
Language  
Disc Menu Language  
Subtitle Language  
Audio Language  
To select a preferred language for disc menus.  
To select a preferred language for subtitles.  
32  
33  
To select a preferred language for the sound track. 33  
On Screen  
Language  
To select a preferred language for on-screen  
displays.  
33  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Ethernet  
To set up internet connection feature.  
22  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Group  
Setting  
Disc  
Details  
Page  
34  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
DVD-R  
DVD-R  
DVD-R  
CD  
CD  
CD  
General  
Parental Lock  
Clock Set  
To turn the parental lock function on or off.  
To set the clock of the player.  
19  
OSD On/Off  
To activate or deactivate the operational status  
display on the TV screen.  
35  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Remote Controller  
Sound  
To turn on or off the confirmation beeper  
announcing when each remote command is  
received.  
35  
35  
35  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
HD DVD DVD-Video DVD-RW  
DVD-R  
DVD-R  
DVD-R  
CD  
CD  
CD  
HDMI Control  
Screen Saver  
Maintenance  
To turn on or off the features offered with CEC  
(Consumer Electronics Control).  
To turn on or off the screen saver (screen  
protection to prevent image burn).  
To reset player options to factory defaults or check 35  
for firmware updates.  
HD DVD DVD-Video DVD-RW  
DVD-R  
CD  
Twin Format Disc  
To select the layer to play of an HD DVD Twin  
Format Disc. (Not available while a disc is loaded.)  
35  
Settings  
Picture  
Note  
• Actual effects of these settings may vary depending on performance of connected device.  
TV Shape  
16:9  
4:3  
Select when a 16:9 wide TV is connected.  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen. Both of the picture’s sides are cut off.  
4:3 Letter Box  
Notes  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars above and below the picture.  
• When an HD DVD disc or a DVD video disc has a particular available picture shape, the contents may not be compatible with other  
picture shapes.  
• DVD video discs containing 4:3 picture only always display 4:3 pictures regardless of this setting.  
• If “16:9” is selected while connecting a 4:3 TV, playback pictures may be distorted horizontally or shrink vertically. Make this setting  
according to your TV shape.  
• Actual picture shape may depend on signal types of broadcasts or input sources, or settings on the connected TV. Refer to the owner’s  
manual of your TV.  
Enhanced Black Level  
On  
To display deeper, richer black than in “Off” setting. (0 IRE)  
Normal black level. (7.5 IRE)  
Off  
Note  
• Effective only in 480i output from the COMPONENT VIDEO OUTPUT jacks or the VIDEO OUTPUT jack.  
RGB Output Range  
Standard  
Enhanced  
Note  
For a monitor of RGB range 16-235.  
For a monitor of RGB range 0-255.  
• If “Standard” pales black or “Enhanced” blackens too much, change the setting.  
(Continued)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the function settings (Continued)  
Picture Mode  
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24  
frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type  
of content being viewed.  
Film  
The player converts film content pictures in the progressive output format appropriately. Suitable for playback  
of film content pictures.  
Video  
Auto  
Note  
The player filters video signal, and converts it in the progressive output format appropriately. Suitable for  
playback of video content pictures.  
Select this position normally. The player automatically detects source content, film or video, of playback  
source, and converts that signal in the progressive output format in an appropriate method.  
• The player may not be able to detect the source (film or video) of some material. If you notice undesirable picture performance, try  
selecting “Film” or “Video”.  
Resolution Setting  
See page 20.  
Audio  
Digital Out SPDIF  
See page 21.  
Digital Out HDMI  
See page 21.  
Dynamic Range Control  
To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late-hour playback.  
Auto  
While playing an HD DVD video disc recorded in Dolby TrueHD format, this function will be automatically  
activated or disabled according to certain command included in the content. For other discs, this function is  
activated.  
On  
Off  
This function is activated.  
This function is disabled.  
Notes  
• This function is effective only in playback of HD DVD or DVD video discs recorded in Dolby Digital, Dolby Digital Plus or Dolby TrueHD  
format.  
• The effect level of this function vary depending on the disc.  
• Not effective in Dolby TrueHD 96 kHz 5.1 channel sound.  
Dialog Enhancement  
To turn on or off a function that increases dialog volume of a DVD video disc playback.  
On  
Off  
This function is activated.  
This function is disabled.  
Notes  
• This function is effective only in playback of Dolby Digital recorded HD DVD or DVD video discs.  
• The effect level of this function vary depending on the disc.  
Language  
Disc Menu Language  
To select a preferred language for disc menus.  
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish  
Other  
To make a further language choice.  
Refer to “How to select a language” ( page 33).  
Note  
• Some discs may be played in a different language from that you selected, as the disc may contain alternate language.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Subtitle Language  
To select a preferred language for subtitles.  
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish  
None  
Other  
To disable subtitles.  
To make a further language choice.  
Refer to “How to select a language” ( page 33).  
Notes  
• Some discs may be set to display subtitles in a different language from that you selected, as the disc may contain alternate language.  
• Some discs allow you to change subtitle selections only via the disc menu. In this case, press MENU button and choose the appropriate  
subtitle language from the selection on the disc menu.  
Audio Language  
To select a preferred language for the sound track.  
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish  
Other  
To make a further language choice.  
Refer to “How to select a language” ( page 33).  
Note  
• Some discs may be played in a different language from that you selected, as the disc may contain alternate language.  
On Screen Language  
To select a preferred language for on-screen displays.  
English / French / German / Spanish / Italian / Dutch / Russian / Swedish / Finnish / Greek / Turkish  
How to select a language:  
e.g.  
1) Obtain the code from the list below.  
/
to  
2) Enter the code as below.  
3) Select “OK” and press OK button.  
U
S
/
OK  
Cancel  
change  
to shift  
Language code list  
Code  
Language  
No alternate  
language  
Code  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
EO  
ET  
EU  
FA  
Language  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Code  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MT  
MY  
NA  
Language  
Indonesian  
Icelandic  
Hebrew  
Code  
NE  
NO  
OC  
OM  
OR  
PA  
PL  
PS  
PT  
QU  
RM  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Language  
Nepali  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Panjabi  
Code  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
Language  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Telugu  
Tajik  
Thai  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
– – –  
CHI (ZH) Chinese  
DUT (NL) Dutch  
ENG (EN) English  
FRE (FR) French  
GER (DE) German  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laotian  
Bhutani  
Greek  
Polish  
ITA (IT)  
Italian  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
JPN (JA) Japanese  
KOR (KO) Korean  
MAY (MS) Malay  
TK  
TL  
SPA (ES) Spanish  
FI  
FJ  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
Afar  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Belorussian  
Bulgarian  
Bihari  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
Irish  
Scottish Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Lithuanian  
Sindhi  
Sango  
Twi  
Ukrainian  
Urdu  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Serbo-Croatian  
Singhalese  
Slovak  
Sovenian  
Samoan  
Shona  
Somali  
Albanian  
Serbian  
Siswati  
Uzbek  
SK  
SL  
VIetnamese  
Volapük  
Wolof  
Xhosa  
Yoruba  
Zulu  
Hindi  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
Inupiak  
SM  
SN  
SO  
SQ  
SR  
SS  
Bislama  
Bengali, Bangla  
Tibetan  
BN  
BO  
BR  
Maltese  
Burmese  
Nauru  
IE  
IK  
Breton  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the function settings (Continued)  
Ethernet  
See page 22.  
General  
Parental Lock  
HD DVD and DVD video discs equipped with the Parental Lock function have a predetermined limitation level. The limitation level or  
limitation method may differ depending on the disc. For example the whole contents of a disc may not be played back, or an extreme  
violent scene may be cut or replaced automatically by another scene.  
Important  
• Depending on discs, it may not be evident whether the disc is compatible with Parental Lock function. Make sure that Parental Lock  
function you set is activated correctly.  
1 Enter a 4-digit password by using the number buttons, then press OK button.  
When you use the player for the first time, set a new password of 4-digit. If you make a mistake entering your password, press  
CLEAR button before pressing OK button, and re-enter the correct password.  
2 Set the details.  
a) Select “On” or “Off” by pressing  
/
buttons.  
Parental Lock  
On  
Select this to activate Parental Lock  
function or to change the setting.  
Lock  
Area Code Level  
to  
/
change  
Off  
U
S
8
OK  
Cancel  
Off  
Deactivates the Parental Lock function.  
Skip b) and c) to go to 3.  
a)  
b)  
c)  
/
to shift  
b) Enter the code of a country/area whose standards were used to rate a disc, referring to the list below.  
Country/Area  
AUSTRALIA  
BELGIUM  
CANADA  
CHINA  
CHINA HONG KONG  
DENMARK  
FINLAND  
Code  
AU  
BE  
CA  
CN  
HK  
DK  
FI  
Country/Area  
INDONESIA  
ITALY  
Code  
ID  
IT  
Country/Area  
SPAIN  
SWEDEN  
SWITZERLAND  
TAIWAN  
THAILAND  
Code  
ES  
BE  
CH  
TW  
TH  
GB  
US  
JAPAN  
JP  
MALAYSIA  
NETHERLANDS  
NORWAY  
MY  
NL  
NO  
PH  
UNITED KINGDOM  
UNITED STATES  
PHILIPPINES  
FRANCE  
GERMANY  
FR  
DE  
RUSSIAN FEDERATION RU  
SINGAPORE SG  
c) Select the desired limitation level.  
Unless the Parental Lock function is set to “Off”, a disc that has a higher limitation level than your selected limitation level cannot  
be played back. For example, if you select level 7, discs exceeding level 8 are locked and cannot be played back.  
When “US” is selected, its limitation level corresponds to the following settings.  
Level 7: NC-17  
Level 6: R  
Level 4: PG13  
Level 3: PG  
Level 1: G  
3 Select “OK’ then press OK button.  
To change the limitation level of Parental Lock function  
Follow steps 1 - 3 above.  
To change the password  
1 At step 1, press STOP button 4 times then press OK button.  
The password is cleared.  
2 Enter a new 4-digit password by using the number buttons.  
3 Press OK button.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock Set  
See page 19.  
OSD On/Off  
On  
Off  
Activates the operational status display (e.g., ) on the TV screen.  
Deactivates the operational status display (e.g., ) on the TV screen.  
Remote Controller Sound  
On  
Off  
Turns on the beep sound.  
Turns off the beep sound.  
HDMI Control  
To turn on or off the features offered with CEC (Consumer Electronics Control) when an HDMI device is connected to this player.  
Use of HDMI Control which is a feature based on HDMI-CEC requires an HDMI-CEC compatible display device.  
Enable HDMI  
control  
Select “On” to control this player using the remote control of your TV.  
To disable this function, select “Off”.  
OneTouchPlay  
(Only when “Enable HDMI control” is set to “On”)  
Select “On” to turn the connected TV on if it is off and set its input to the player automatically to display the  
player’s picture, by pressing one of (PLAY), MENU, RESUME PLAY, TOP MENU buttons.  
To disable this function, select “Off”.  
SystemStandby  
Notes  
(Only when “Enable HDMI control” is set to “On”)  
Select “On” to turn off both the player and the connected TV from the TV’s remote control.  
To disable this function, select “Off”.  
• Depending on the specifications of your TV, this function does not work even when your TV is HDMI-compatible.  
• All the above features may not always work on all compatible TVs.  
Screen Saver  
Auto Power Off  
On  
Off  
Turns the player off if stop mode or picture pausing continues for about 20 minutes.  
Activates the screen saver if stop mode or picture pausing continues for about 20 minutes.  
Deactivates the screen saver.  
Notes  
• Toshiba does not guarantee that this function will protect your display.  
• To close the screen saver, press any button on the player or the remote control.  
• When an HD DVD disc is used, this function activates only in stop mode.  
Maintenance  
Initialize  
To reset all the settings listed on page 30, 31 to factory set default.  
Press buttons to select “Yes” then press OK button.  
Update (Firmware If you have a broadband internet service you may obtain firmware updates over the internet using the LAN  
/
update)  
port on the back of your player. ( page 17, 28 for information on configuring and connecting your LAN port.)  
Then follow these steps:  
• Make sure no disc is loaded in the player.  
• Press SETUP and select “General” > “Maintenance”. Follow the instructions on the screen.  
• If no update is available, a message will note this and the process will terminate.  
• If an update is available, the player will download it showing the status of the process on its display.  
• Do not attempt to roll back to a prior firmware version. This may damage your player.  
Caution  
Do not unplug, turn off or use any other feature of the player during the download. The writing of the software being downloaded  
will be halted and the player may no longer work properly. If the player stops working, contact Toshiba Customer Service.  
Note  
• If a broadband connection is not available for use by your player, you may obtain firmware updates by mail. There  
is a postcard included with this player that you can use to sign up for updates on firmware availability and to  
automatically receive update discs.  
Persistent Storage To open the menu to control player’s memory allocated for content.  
The menu selections will vary depending on the content. Operate following the instructions displayed on your  
screen.  
Twin Format Disc  
To select a layer to play, HD DVD or DVD of an HD DVD Twin Format Disc. (Not available if a disc is loaded.)  
HD DVD  
DVD  
Only the HD DVD layer is played.  
Only the DVD layer is played.  
Note  
• For combination discs, select the desired version by disc side (see label for information).  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before calling service personnel  
Before accessing, try updating this player’s firmware. For details on how to update, see “Update (Firmware  
update)” ( page 35).  
If you experience any of the following difficulties while using this unit, check the list below before consulting your  
nearest Toshiba dealer.  
Symptom  
No power.  
No picture.  
Remedy  
Page  
17  
• Is the power plug disconnected? Check the power connection.  
• Is the cable for connecting the player and TV disconnected or not connected properly?  
Check the connections.  
15  
• Switch the input of the connected TV to the signal from the player.  
• Are both the HDMI OUTPUT jack and the COMPONENT VIDEO OUTPUT jacks  
connected simultaneously? Select either connection and make the appropriate setting.  
15  
• In case the menu of “Resolution Setting” disappears, make composite video (yellow)  
20  
connection to restore it, then select the resolution which is compatible with the connected  
TV.  
No sound.  
• Is the audio cable disconnected?  
14, 16  
• Is the volume of the device turned down to the minimum level? Check the volume.  
• Switch the audio input of the device connected by the audio cable to the input from the  
player.  
• Set “Digital Out SPDIF” or ”Digital Out HDMI” properly in accordance with the connected 21  
device and connection procedure.  
• Change the output resolution so that sound can be heard.  
20  
• If using the optical digital output for a Dolby Digital Plus, Dolby TrueHD, DTS-HD or DTS 21  
soundtrack, be sure your AV receiver or processor is set to use the input connected to  
your player and is set to decode a DTS bitstream. If your AV receiver or processor does  
not support DTS, select PCM output on the player.  
The disc does not play.  
• Make sure the disc type can be played with the player.  
• Is the disc dirty or scratched? Check or clean the disc.  
8
9
• If the disc is a DVD-RW or DVD-R disc, finalize the disc before attempting to play it with  
the player.  
• If the disc includes parent lock support, playback is restricted while the parent lock of the 34  
player is set. Cancel Parental Lock or change the restriction level.  
Playback picture has noise.  
• If video from the player is watched via a video recorder or on a TV with a built-in video  
recorder, the copy guard may prevent images from being displayed properly. Be sure to  
connect the player directly to the TV.  
15  
Playback picture does not  
move smoothly.  
• “Resolution Setting” > “up to 1080p/24Hz” is selected. Change the setting.  
• Are the batteries of the remote control dead? Replace the batteries.  
• Make sure the remote control is within range and pointed in the correct direction.  
20  
13  
The remote control does not  
work.  
13  
35  
HDMI Control (CEC function) • Make sure the HDMI cable is firmly connected, then turn on both the TV and the player  
does not work. again.  
Screen freezes and no buttons • Pressing ON/STANDBY button on the player for approximately ten seconds forces the  
work. player to turn off. Turn the player off and then on again.  
After powering on, “Clock Set” • The power supply to the player may have been disconnected. Reset the clock.  
menu appears.  
19  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License information on the software used in  
the TOSHIBA HD DVD player  
This document is statement purpose only. Not concerned with operation of this product.  
The software pre-installed in the TOSHIBA HD DVD player consists of multiple, independent software components. Each software component is copyrighted by  
TOSHIBA or a third party.  
The TOSHIBA HD DVD player uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice  
(hereinafter referred to as a “EULA”).  
Some EULAs require that the source code of the applicable component be disclosed as the condition for distributing the software component in executable  
format. You can check the software components subject to such EULA requirements on the following phone number:  
Phone number: 1-800-631-3811  
TOSHIBA provides a warranty for the TOSHIBA HD DVD player you have purchased under conditions set forth by TOSHIBA.  
However, some of the software components distributed under an EULA are made available for use by the user on the assumption that they are not copyrighted  
or warranted by TOSHIBA or any third party. These software components are licensed to the user free of charge and therefore not covered by any warranty  
within the scope of the applicable laws. These software components are not subject to any copyrights or other third-party rights and are provided in “as is”  
condition without any warranty, whether express or implied. “Warranty” here includes, but not limited to, an implied warranty for marketability or fitness for specific  
uses. All risks associated with the quality or performance of these software components are assumed by the user. TOSHIBA shall not be liable whatsoever for  
any cost of repair or correction or other incidental expense incurred in connection with a defect found in any of these software components. Unless specified  
under the applicable laws or in a written agreement, a party who changes or redistributes the software with consent from the copyright holders or based on the  
aforementioned licenses shall not be held liable whatsoever for any loss arising from the use of or inability to use such software components. The same applies  
even when the copyright holders or relevant third parties have been informed of the possibility of such loss. “Loss” here includes normal, special, incidental and  
indirect loss (including, but not limited to, the loss of data or its accuracy; loss incurred by the user or any third party; and interface incompatibility with other  
software). Please read each EULA for details on the use conditions and items that must be observed regarding these software components.  
The table below lists the software components pre-installed in the TOSHIBA HD DVD player, which are subject to EULAs. The user should read the applicable  
EULAs carefully before using these software components. The EULAs are exhibited in their original text (English) as exactly written by the respective parties  
other than TOSHIBA  
Pre-installed software  
EULA  
Pre-installed software  
EULA  
Linux Kernel  
Busybox  
Exhibit A  
OpenSSL  
Exhibit C  
glibc  
Exhibit B  
freetype  
Exhibit D  
E x h i b i t A  
wish to avoid the danger that redistributors of a free program will individually  
obtain patent licenses, in effect making the program proprietary. To prevent  
this, we have made it clear that any patent must be licensed for everyone's  
free use or not licensed at all.  
GNU GENERAL PUBLIC LICENSE Version 2, June 1991  
Copyright © 1989, 1991 Free Software Foundation, Inc.  
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA  
The precise terms and conditions for copying, distribution and modification  
follow.  
Everyone is permitted to copy and distribute verbatim copies of this license  
document, but changing it is not allowed.  
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR  
COPYING, DISTRIBUTION AND MODIFICATION  
Preamble  
0. This License applies to any program or other work which contains a  
notice placed by the copyright holder saying it may be distributed under the  
terms of this General Public License. The "Program", below, refers to any  
such program or work, and a "work based on the Program" means either the  
Program or any derivative work under copyright law: that is to say, a work  
containing the Program or a portion of it, either verbatim or with modifications  
and/or translated into another language. (Hereinafter, translation is included  
without limitation in the term "modification".) Each licensee is addressed as  
"you".  
The licenses for most software are designed to take away your freedom to  
share and change it. By contrast, the GNU General Public License is intended  
to guarantee your freedom to share and change free software – to make sure  
the software is free for all its users. This General Public License applies to  
most of the Free Software Foundation's software and to any other program  
whose authors commit to using it. (Some other Free Software Foundation  
software is covered by the GNU Library General Public License instead.) You  
can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price.  
Our General Public Licenses are designed to make sure that you have the  
freedom to distribute copies of free software (and charge for this service if you  
wish), that you receive source code or can get it if you want it, that you can  
change the software or use pieces of it in new free programs; and that you  
know you can do these things.  
Activities other than copying, distribution and modification are not covered  
by this License; they are outside its scope. The act of running the Program is  
not restricted, and the output from the Program is covered only if its contents  
constitute a work based on the Program (independent of having been made  
by running the Program). Whether that is true depends on what the Program  
does.  
To protect your rights, we need to make restrictions that forbid anyone to  
deny you these rights or to ask you to surrender the rights. These restrictions  
translate to certain responsibilities for you if you distribute copies of the  
software, or if you modify it.  
1.You may copy and distribute verbatim copies of the Program's source  
code as you receive it, in any medium, provided that you conspicuously  
and appropriately publish on each copy an appropriate copyright notice and  
disclaimer of warranty; keep intact all the notices that refer to this License and  
to the absence of any warranty; and give any other recipients of the Program a  
copy of this License along with the Program.  
For example, if you distribute copies of such a program, whether gratis or  
for a fee, you must give the recipients all the rights that you have. You must  
make sure that they, too, receive or can get the source code. And you must  
show them these terms so they know their rights.  
You may charge a fee for the physical act of transferring a copy, and you  
may at your option offer warranty protection in exchange for a fee.  
We protect your rights with two steps: (1) copyright the software, and (2)  
offer you this license which gives you legal permission to copy, distribute  
and/or modify the software.  
2.You may modify your copy or copies of the Program or any portion of  
it, thus forming a work based on the Program, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you  
also meet all of these conditions:  
Also, for each author's protection and ours, we want to make certain that  
everyone understands that there is no warranty for this free software. If the  
software is modified by someone else and passed on, we want its recipients  
to know that what they have is not the original, so that any problems  
introduced by others will not reflect on the original authors' reputations.  
a) You must cause the modified files to carry prominent notices stating  
that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole  
or in part contains or is derived from the Program or any part there  
Finally, any free program is threatened constantly by software patents. We  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License information on the software used in  
the TOSHIBA HD DVD player (continued)  
of, to be licensed as a whole at no charge to all third parties under  
the terms of this License.  
modifying the Program or works based on it.  
6.Each time you redistribute the Program (or any work based on the  
Program), the recipient automatically receives a license from the original  
licensor to copy, distribute or modify the Program subject to these terms and  
conditions. You may not impose any further restrictions on the recipients'  
exercise of the rights granted herein. You are not responsible for enforcing  
compliance by third parties to this License.  
c) If the modified program normally reads commands interactively when  
run, you must cause it, when started running for such interactive  
use in the most ordinary way, to print or display an announcement  
including an appropriate copyright notice and a notice that there is  
no warranty (or else, saying that you provide a warranty) and that  
users may redistribute the program under these conditions, and  
telling the user how to view a copy of this License.  
7.If as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent issues), conditions  
are imposed on you (whether by court order, agreement or otherwise)  
that contradict the conditions of this License, they do not excuse you from  
the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the Program at all.  
(Exception: if the Program itself is interactive but does not normally  
print such an announcement, your work based on the Program is not  
required to print an announcement.)  
These requirements apply to the modified work as a whole.  
If identifiable sections of that work are not derived from the Program, and can  
be reasonably considered independent and separate works in themselves,  
then this License, and its terms, do not apply to those sections when you  
distribute them as separate works. But when you distribute the same sections  
as part of a whole which is a work based on the Program, the distribution  
of the whole must be on the terms of this License, whose permissions for  
other licensees extend to the entire whole, and thus to each and every part  
regardless of who wrote it.  
For example, if a patent license would not permit royalty-free redistribution  
of the Program by all those who receive copies directly or indirectly through  
you, then the only way you could satisfy both it and this License would be to  
refrain entirely from distribution of the Program. If any portion of this section is  
held invalid or unenforceable under any particular circumstance, the balance  
of the section is intended to apply and the section as a whole is intended to  
apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or  
other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution  
system, which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through  
that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any  
other system and a licensee cannot impose that choice.  
Thus, it is not the intent of this section to claim rights or contest your rights to  
work written entirely by you; rather, the intent is to exercise the right to control  
the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with  
the Program (or with a work based on the Program) on a volume of a storage  
or distribution medium does not bring the other work under the scope of this  
License.  
3.You may copy and distribute the Program (or a work based on it, under  
Section 2) in object code or executable form under the terms of Sections 1  
and 2 above provided that you also do one of the following:  
This section is intended to make thoroughly clear what is believed to be a  
consequence of the rest of this License.  
8.If the distribution and/or use of the Program is restricted in certain  
countries either by patents or by copyrighted interfaces, the original  
copyright holder who places the Program under this License may add an  
explicit geographical distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus excluded. In such  
case, this License incorporates the limitation as if written in the body of this  
License.  
a) Accompany it with the complete corresponding machine-readable  
source code, which must be distributed under the terms of Sections  
1 and 2 above on a medium customarily used for software  
interchange; or,  
b) Accompany it with a written offer, valid for at least three  
years, to give any third party, for a charge no more than your  
cost of physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to be  
distributed under the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
9.The Free Software Foundation may publish revised and/or new versions  
of the General Public License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ in detail to address new  
problems or concerns.  
c) Accompany it with the information you received as to the offer to  
distribute corresponding source code. (This alternative is allowed  
only for noncommercial distribution and only if you received the  
program in object code or executable form with such an offer, in  
accord with Subsection b above.)  
Each version is given a distinguishing version number. If the Program  
specifies a version number of this License which applies to it and "any later  
version", you have the option of following the terms and conditions either of  
that version or of any later version published by the Free Software Foundation.  
If the Program does not specify a version number of this License, you may  
choose any version ever published by the Free Software Foundation.  
The source code for a work means the preferred form of the work for making  
modifications to it. For an executable work, complete source code means  
all the source code for all modules it contains, plus any associated interface  
definition files, plus the scripts used to control compilation and installation of  
the executable. However, as a special exception, the source code distributed  
need not include anything that is normally distributed (in either source or  
binary form) with the major components (compiler, kernel, and so on) of the  
operating system on which the executable runs, unless that component itself  
accompanies the executable.  
10.If you wish to incorporate parts of the Program into other free  
programs whose distribution conditions are different, write to the author to  
ask for permission. For software which is copyrighted by the Free Software  
Foundation, write to the Free Software Foundation; we sometimes make  
exceptions for this. Our decision will be guided by the two goals of preserving  
the free status of all derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
NO WARRANTY  
If distribution of executable or object code is made by offering access to copy  
from a designated place, then offering equivalent access to copy the source  
code from the same place counts as distribution of the source code, even  
though third parties are not compelled to copy the source along with the object  
code.  
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT  
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED  
IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES  
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY  
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE  
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL  
NECESSARY SERVICING, REPAIR OR CORRECTION.  
4.You may not copy, modify, sublicense, or distribute the Program except  
as expressly provided under this License. Any attempt otherwise to copy,  
modify, sublicense or distribute the Program is void, and will automatically  
terminate your rights under this License. However, parties who have received  
copies, or rights, from you under this License will not have their licenses  
terminated so long as such parties remain in full compliance.  
5.You are not required to accept this License, since you have not signed  
it. However, nothing else grants you permission to modify or distribute the  
Program or its derivative works. These actions are prohibited by law if you do  
not accept this License. Therefore, by modifying or distributing the Program  
(or any work based on the Program), you indicate your acceptance of this  
License to do so, and all its terms and conditions for copying, distributing or  
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR  
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE  
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES  
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN  
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
You should have received a copy of the GNU General Public  
License along with this program; if not, write to the Free Software  
Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA  
02111-1307 USA  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it  
starts in an interactive mode:  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
Gnomovision version 69, Copyright © 19yy name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for  
details type `show w'. This is free software, and you are welcome to  
redistribute it under certain conditions; type `show c' for details.  
If you develop a new program, and you want it to be of the greatest possible  
use to the public, the best way to achieve this is to make it free software which  
everyone can redistribute and change under these terms.  
The hypothetical commands `show w' and `show c' should show the  
appropriate parts of the General Public License. Of course, the commands  
you use may be called something other than `show w' and `show c'; they could  
even be mouse-clicks or menu items – whatever suits your program.  
To do so, attach the following notices to the program. It is safest to attach  
them to the start of each source file to most effectively convey the exclusion of  
warranty; and each file should have at least the "copyright" line and a pointer  
to where the full notice is found.  
You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a "copyright disclaimer" for the program; if necessary.  
Here is a sample; alter the names:  
<One line to give the program's name and a brief idea of what it  
does.>  
Copyright © 19yy <name of author>  
Yoyodyne, Inc., hereby disclaims all copyright interest in the  
program `Gnomovision' (which makes passes at compilers) written  
by James Hacker.  
This program is free software; you can redistribute it and/or modify it  
under the terms of the GNU General Public License as published by  
the Free Software Foundation; either version 2 of the License, or (at  
your option) any later version.  
<signature of Ty Coon>,1 April 1989 Ty Coon, President of Vice  
This General Public License does not permit incorporating your program  
into proprietary programs. If your program is a subroutine library, you may  
consider it more useful to permit linking proprietary applications with the  
library. If this is what you want to do, use the GNU Library General Public  
This program is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied warranty of  
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  
See the GNU General Public License for more details.  
License instead of this License.  
To protect each distributor, we want to make it very clear that there is no  
warranty for the free library. Also, if the library is modified by someone else  
and passed on, the recipients should know that what they have is not the  
original version, so that the original author's reputation will not be affected by  
problems that might be introduced by others.  
E x h i b i t B  
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February  
1999  
Copyright ©1991, 1999 Free Software Foundation, Inc. 59 Temple Place,  
Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and  
distribute verbatim copies of this license document, but changing it is not  
allowed.  
Finally, software patents pose a constant threat to the existence of any free  
program. We wish to make sure that a company cannot effectively restrict the  
users of a free program by obtaining a restrictive license from a patent holder.  
Therefore, we insist that any patent license obtained for a version of the library  
must be consistent with the full freedom of use specified in this license.  
[This is the first released version of the Lesser GPL. It also counts as the  
successor of the GNU Library Public License, version 2, hence the version  
number 2.1.]  
Most GNU software, including some libraries, is covered by the ordinary  
GNU General Public License. This license, the GNU Lesser General Public  
License, applies to certain designated libraries, and is quite different from the  
ordinary General Public License. We use this license for certain libraries in  
order to permit linking those libraries into non-free programs.  
Preamble  
The licenses for most software are designed to take away your freedom  
to share and change it. By contrast, the GNU General Public Licenses are  
intended to guarantee your freedom to share and change free software – to  
make sure the software is free for all its users.  
When a program is linked with a library, whether statically or using a shared  
library, the combination of the two is legally speaking a combined work, a  
derivative of the original library. The ordinary General Public License therefore  
permits such linking only if the entire combination fits its criteria of freedom.  
The Lesser General Public License permits more lax criteria for linking other  
code with the library.  
This license, the Lesser General Public License, applies to some specially  
designated software packages – typically libraries – of the Free Software  
Foundation and other authors who decide to use it. You can use it too, but  
we suggest you first think carefully about whether this license or the ordinary  
General Public License is the better strategy to use in any particular case,  
based on the explanations below.  
We call this license the "Lesser" General Public License because it does  
Less to protect the user's freedom than the ordinary General Public License.  
It also provides other free software developers Less of an advantage over  
competing non-free programs. These disadvantages are the reason we use  
the ordinary General Public License for many libraries. However, the Lesser  
license provides advantages in certain special circumstances.  
When we speak of free software, we are referring to freedom of use, not  
price. Our General Public Licenses are designed to make sure that you have  
the freedom to distribute copies of free software (and charge for this service  
if you wish); that you receive source code or can get it if you want it; that you  
can change the software and use pieces of it in new free programs; and that  
you are informed that you can do these things.  
For example, on rare occasions, there may be a special need to encourage  
the widest possible use of a certain library, so that it becomes a de-facto  
standard. To achieve this, non-free programs must be allowed to use the  
library. A more frequent case is that a free library does the same job as widely  
used non-free libraries. In this case, there is little to gain by limiting the free  
library to free software only, so we use the Lesser General Public License.  
To protect your rights, we need to make restrictions that forbid distributors  
to deny you these rights or to ask you to surrender these rights. These  
restrictions translate to certain responsibilities for you if you distribute copies  
of the library or if you modify it.  
In other cases, permission to use a particular library in non-free programs  
enables a greater number of people to use a large body of free software. For  
example, permission to use the GNU C Library in non-free programs enables  
many more people to use the whole GNU operating system, as well as its  
variant, the GNU/Linux operating system.  
For example, if you distribute copies of the library, whether gratis or for a  
fee, you must give the recipients all the rights that we gave you. You must  
make sure that they, too, receive or can get the source code. If you link other  
code with the library, you must provide complete object files to the recipients,  
so that they can relink them with the library after making changes to the library  
and recompiling it. And you must show them these terms so they know their  
rights.  
Although the Lesser General Public License is Less protective of the  
users’ freedom, it does ensure that the user of a program that is linked with  
the Library has the freedom and the wherewithal to run that program using a  
modified version of the Library.  
We protect your rights with a two-step method: (1) we copyright the library,  
and (2) we offer you this license, which gives you legal permission to copy,  
distribute and/ or modify the library.  
The precise terms and conditions for copying, distribution and modification  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License information on the software used in  
the TOSHIBA HD DVD player (continued)  
follow. Pay close attention to the difference between a “work based on the  
library” and a “work that uses the library”. The former contains code derived  
from the library, whereas the latter must be combined with the library in order  
to run.  
In addition, mere aggregation of another work not based on the Library with  
the Library (or with a work based on the Library) on a volume of a storage  
or distribution medium does not bring the other work under the scope of this  
License.  
3.You may opt to apply the terms of the ordinary GNU General Public  
License instead of this License to a given copy of the Library. To do this, you  
must alter all the notices that refer to this License, so that they refer to the  
ordinary GNU General Public License, version 2, instead of to this License. (If  
a newer version than version 2 of the ordinary GNU General Public License  
has appeared, then you can specify that version instead if you wish.) Do not  
make any other change in these notices.  
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS  
FOR COPYING, DISTRIBUTION AND MODIFICATION  
0.This License Agreement applies to any software library or other program  
which contains a notice placed by the copyright holder or other authorized  
party saying it may be distributed under the terms of this Lesser General  
Public License (also called "this License"). Each licensee is addressed as  
"you".  
Once this change is made in a given copy, it is irreversible for that copy, so  
the ordinary GNU General Public License applies to all subsequent copies and  
derivative works made from that copy.  
A "library" means a collection of software functions and/or data prepared  
so as to be conveniently linked with application programs (which use some of  
those functions and data) to form executables.  
This option is useful when you wish to copy part of the code of the Library  
into a program that is not a library.  
The "Library", below, refers to any such software library or work which  
has been distributed under these terms. A "work based on the Library"  
means either the Library or any derivative work under copyright law: that  
is to say, a work containing the Library or a portion of it, either verbatim  
or with modifications and/or translated straightforwardly into another  
language. (Hereinafter, translation is included without limitation in the term  
"modification".)  
4.You may copy and distribute the Library (or a portion or derivative of  
it, under Section 2) in object code or executable form under the terms of  
Sections 1 and 2 above provided that you accompany it with the complete  
corresponding machine-readable source code, which must be distributed  
under the terms of Sections 1 and 2 above on a medium customarily used for  
software interchange.  
"Source code" for a work means the preferred form of the work for making  
modifications to it. For a library, complete source code means all the source  
code for all modules it contains, plus any associated interface definition files,  
plus the scripts used to control compilation and installation of the library.  
If distribution of object code is made by offering access to copy from a  
designated place, then offering equivalent access to copy the source code  
from the same place satisfies the requirement to distribute the source code,  
even though third parties are not compelled to copy the source along with the  
object code.  
Activities other than copying, distribution and modification are not covered  
by this License; they are outside its scope. The act of running a program using  
the Library is not restricted, and output from such a program is covered only  
if its contents constitute a work based on the Library (independent of the use  
of the Library in a tool for writing it). Whether that is true depends on what the  
Library does and what the program that uses the Library does.  
5.A program that contains no derivative of any portion of the Library, but is  
designed to work with the Library by being compiled or linked with it, is called  
a “work that uses the Library”. Such a work, in isolation, is not a derivative  
work of the Library, and therefore falls outside the scope of this License.  
However, linking a “work that uses the Library” with the Library creates  
an executable that is a derivative of the Library (because it contains portions  
of the Library), rather than a “work that uses the library”. The executable is  
therefore covered by this License. Section 6 states terms for distribution of  
such executables.  
1.You may copy and distribute verbatim copies of the Library's  
complete source code as you receive it, in any medium, provided that you  
conspicuously and appropriately publish on each copy an appropriate  
copyright notice and disclaimer of warranty; keep intact all the notices that  
refer to this License and to the absence of any warranty; and distribute a copy  
of this License along with the Library.  
When a "work that uses the Library" uses material from a header file that  
is part of the Library, the object code for the work may be a derivative work  
of the Library even though the source code is not. Whether this is true is  
especially significant if the work can be linked without the Library, or if the  
work is itself a library. The threshold for this to be true is not precisely defined  
by law.  
You may charge a fee for the physical act of transferring a copy, and you  
may at your option offer warranty protection in exchange for a fee.  
2.You may modify your copy or copies of the Library or any portion of  
it, thus forming a work based on the Library, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you  
also meet all of these conditions:  
If such an object file uses only numerical parameters, data structure layouts  
and accessors, and small macros and small inline functions (ten lines or less  
in length), then the use of the object file is unrestricted, regardless of whether  
it is legally a derivative work. (Executables containing this object code plus  
portions of the Library will still fall under Section 6.)  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating  
that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to  
all third parties under the terms of this License.  
Otherwise, if the work is a derivative of the Library, you may distribute  
the object code for the work under the terms of Section 6. Any executables  
containing that work also fall under Section 6, whether or not they are linked  
directly with the Library itself.  
d) If a facility in the modified Library refers to a function or a table of  
data to be supplied by an application program that uses the facility,  
other than as an argument passed when the facility is invoked,  
then you must make a good faith effort to ensure that, in the event  
an application does not supply such function or table, the facility  
still operates, and performs whatever part of its purpose remains  
meaningful.  
6.As an exception to the Sections above, you may also combine or link  
a “work that uses the Library” with the Library to produce a work containing  
portions of the Library, and distribute that work under terms of your choice,  
provided that the terms permit modification of the work for the customer's own  
use and reverse engineering for debugging such modifications.  
(For example, a function in a library to compute square roots has a  
purpose that is entirely welldefined independent of the application.  
Therefore, Subsection 2d requires that any application supplied  
function or table used by this function must be optional: if the  
application does not supply it, the square root function must still  
compute square roots.)  
You must give prominent notice with each copy of the work that the Library  
is used in it and that the Library and its use are covered by this License. You  
must supply a copy of this License. If the work during execution displays  
copyright notices, you must include the copyright notice for the Library among  
them, as well as a reference directing the user to the copy of this License.  
Also, you must do one of these things:  
These requirements apply to the modified work as a whole. If identifiable  
sections of that work are not derived from the Library, and can be reasonably  
considered independent and separate works in themselves, then this License,  
and its terms, do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as part of a whole  
which is a work based on the Library, the distribution of the whole must be on  
the terms of this License, whose permissions for other licensees extend to the  
entire whole, and thus to each and every part regardless of who wrote it.  
a) Accompany the work with the complete corresponding  
machine-readable source code for the Library including whatever  
changes were used in the work (which must be distributed under  
Sections 1 and 2 above); and, if the work is an executable linked with  
the Library, with the complete machine-readable “work that uses the  
Library”, as object code and/or source code, so that the user can  
modify the Library and then relink to produce a modified executable  
containing the modified Library. (It is understood that the user  
who changes the contents of definitions files in the Library will not  
necessarily be able to recompile the application to use the modified  
definitions.)  
Thus, it is not the intent of this section to claim rights or contest your rights to  
work written entirely by you; rather, the intent is to exercise the right to control  
the distribution of derivative or collective works based on the Library.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b) Use a suitable shared library mechanism for linking with the Library.  
A suitable mechanism is one that (1) uses at run time a copy of the  
library already present on the user’s computer system, rather than  
copying library functions into the executable, and (2) will operate  
properly with a modified version of the library, if the user installs  
one, as long as the modified version is interface-compatible with the  
version that the work was made with.  
other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution  
system which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through  
that system in reliance on consistent application of that system; it is up to the  
author/donor to decide if he or she is willing to distribute software through any  
other system and a licensee cannot impose that choice.  
c) Accompany the work with a written offer, valid for at least three  
years, to give the same user the materials specified in Subsection  
6a, above, for a charge no more than the cost of performing this  
distribution.  
This section is intended to make thoroughly clear what is believed to be a  
consequence of the rest of this License.  
12.If the distribution and/or use of the Library is restricted in certain  
countries either by patents or by copyrighted interfaces, the original  
copyright holder who places the Library under this License may add an  
explicit geographical distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus excluded. In such  
case, this License incorporates the limitation as if written in the body of this  
License.  
d) If distribution of the work is made by offering access to copy from  
a designated place, offer equivalent access to copy the above  
specified materials from the same place.  
e) Verify that the user has already received a copy of these materials or  
that you have already sent this user a copy.  
13.The Free Software Foundation may publish revised and/or new versions  
of the Lesser General Public License from time to time. Such new versions  
will be similar in spirit to the present version, but may differ in detail to address  
new problems or concerns. Each version is given a distinguishing version  
number. If the Library specifies a version number of this License which applies  
to it and “any later version”, you have the option of following the terms and  
conditions either of that version or of any later version published by the Free  
Software Foundation. If the Library does not specify a license version number,  
you may choose any version ever published by the Free Software Foundation.  
For an executable, the required form of the “work that uses the Library”  
must include any data and utility programs needed for reproducing the  
executable from it. However, as a special exception, the materials to be  
distributed need not include anything that is normally distributed (in either  
source or binary form) with the major components (compiler, kernel, and  
so on) of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
It may happen that this requirement contradicts the license restrictions  
of other proprietary libraries that do not normally accompany the operating  
system. Such a contradiction means you cannot use both them and the  
Library together in an executable that you distribute.  
14.If you wish to incorporate parts of the Library into other free programs  
whose distribution conditions are incompatible with these, write to the author  
to ask for permission. For software which is copyrighted by the Free Software  
Foundation, write to the Free Software Foundation; we sometimes make  
exceptions for this. Our decision will be guided by the two goals of preserving  
the free status of all derivatives of our free software and of promoting the  
sharing and reuse of software generally.  
7.You may place library facilities that are a work based on the Library  
side-by-side in a single library together with other library facilities not covered  
by this License, and distribute such a combined library, provided that the  
separate distribution of the work based on the Library and of the other library  
facilities is otherwise permitted, and provided that you do these two things:  
NO WARRANTY  
a) Accompany the combined library with a copy of the same work  
based on the Library, uncombined with any other library facilities.  
This must be distributed under the terms of the Sections above.  
15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE  
IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING  
THE COPYRIGHT HOLDERS AND/ OR OTHER PARTIES PROVIDE  
THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY  
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY  
SERVICING, REPAIR OR CORRECTION.  
b) Give prominent notice with the combined library of the fact that part  
of it is a work based on the Library, and explaining where to find the  
accompanying uncombined form of the same work.  
8.You may not copy, modify, sublicense, link with, or distribute the Library  
except as expressly provided under this License. Any attempt otherwise to  
copy, modify, sublicense, link with, or distribute the Library is void, and will  
automatically terminate your rights under this License. However, parties who  
have received copies, or rights, from you under this License will not have their  
licenses terminated so long as such parties remain in full compliance.  
16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR  
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR  
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE  
THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR  
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY  
TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES  
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH  
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES.  
9.You are not required to accept this License, since you have not signed  
it. However, nothing else grants you permission to modify or distribute the  
Library or its derivative works. These actions are prohibited by law if you do  
not accept this License. Therefore, by modifying or distributing the Library (or  
any work based on the Library), you indicate your acceptance of this License  
to do so, and all its terms and conditions for copying, distributing or modifying  
the Library or works based on it.  
10.Each time you redistribute the Library (or any work based on the  
Library), the recipient automatically receives a license from the original  
licensor to copy, distribute, link with or modify the Library subject to these  
terms and conditions. You may not impose any further restrictions on the  
recipients’ exercise of the rights granted herein. You are not responsible for  
enforcing compliance by third parties with this License.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
11.If, as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent issues), conditions  
are imposed on you (whether by court order, agreement or otherwise)  
that contradict the conditions of this License, they do not excuse you from  
the conditions of this License. If you cannot distribute so as to satisfy  
simultaneously your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the Library at all.  
For example, if a patent license would not permit royalty-free redistribution of  
the Library by all those who receive copies directly or indirectly through you,  
then the only way you could satisfy both it and this License would be to refrain  
entirely from distribution of the Library.  
If you develop a new library, and you want it to be of the greatest possible  
use to the public, we recommend making it free software that everyone can  
redistribute and change. You can do so by permitting redistribution under  
these terms (or, alternatively, under the terms of the ordinary General Public  
License).  
To apply these terms, attach the following notices to the library. It is safest  
to attach them to the start of each source file to most effectively convey the  
exclusion of warranty; and each file should have at least the “copyright” line  
and a pointer to where the full notice is found.  
<one line to give the library's name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This library is free software; you can redistribute it and/or modify  
it under the terms of the GNU Lesser General Public License as  
published by the Free Software Foundation; either version 2 of  
If any portion of this section is held invalid or unenforceable under any  
particular circumstance, the balance of the section is intended to apply, and  
the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License information on the software used in  
the TOSHIBA HD DVD player (continued)  
Also add information on how to contact you by electronic and paper mail.  
the License, or (at your option) any later version.  
You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here  
is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright  
interest in the library `Frob' (a library for tweaking knobs) written by James  
Random Hacker.  
This library is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied warranty  
of MERCHANTABILITY or FITNESS FOR A PARTICULAR  
PURPOSE. See the GNU Lesser General Public License for  
more details.  
You should have received a copy of the GNU Lesser General  
Public License along with this library; if not, write to the Free  
Software Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA  
02111-1307 USA  
<signature of Ty Coon>,1 April 1990  
Ty Coon,President of Vice  
That's all there is to it!  
E x h i b i t C  
Copyright ©1995-1998 Eric Young ([email protected]) All rights reserved.  
This package is an SSL implementation written by  
LICENSE ISSUES  
Eric Young ([email protected]).  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the  
OpenSSL License and the original SSLeay license apply to the toolkit.  
The implementation was written so as to conform with Netscapes SSL.  
See below for the actual license texts. Actually both licenses are BSD-style  
Open Source licenses. In case of any license issues related to OpenSSL  
please contact [email protected].  
This library is free for commercial and non-commercial use as long as the  
following conditions are aheared to. The following conditions apply to all code  
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not  
just the SSL code. The SSL documentation included with this distribution is  
covered by the same copyright terms except that the holder is Tim Hudson  
OpenSSL License  
Copyright © 1998-2002 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
Copyright remains Eric Young's, and as such any Copyright notices in the  
code are not to be removed.  
1. Redistributions of source code must retain the above copyright notice, this  
list of conditions and the following disclaimer.  
If this package is used in a product, Eric Young should be given attribution as  
the author of the parts of the library used.  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
This can be in the form of a textual message at program startup or in  
documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
3. All advertising materials mentioning features or use of this software must  
display the following acknowledgment:  
1. Redistributions of source code must retain the copyright notice, this list of  
conditions and the following disclaimer.  
"This product includes software developed by the OpenSSL Project for use in  
the OpenSSL Toolkit. (http://www.openssl.org/)"  
2. Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to  
endorse or promote products derived from this software without prior written  
permission. For written permission, please contact [email protected].  
3. All advertising materials mentioning features or use of this software must  
display the following acknowledgement:  
5. Products derived from this software may not be called "OpenSSL" nor  
may "OpenSSL" appear in their names without prior written permission of the  
OpenSSL Project.  
"This product includes cryptographic software written by Eric Young  
6. Redistributions of any form whatsoever must retain the following  
acknowledgment:  
The word 'cryptographic' can be left out if the rouines from the library being  
used are not cryptographic related :-).  
“This product includes software developed by the OpenSSL Project for use in  
the OpenSSL Toolkit (http:// www.openssl.org/)”  
4. If you include any Windows specific code (or a derivative thereof) from the  
apps directory (application code) you must include an acknowledgement:  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS”  
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
"This product includes software written by Tim Hudson (tjh@ cryptsoft.com)"  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY  
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;  
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY  
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,  
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY  
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER  
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
This product includes cryptographic software written by Eric Young  
([email protected]). This product includes software written by Tim  
The licence and distribution terms for any publically available version or  
derivative of this code cannot be changed. i.e. this code cannot simply be  
copied and put under another distribution licence [including the GNU Public  
Licence.]  
Hudson ([email protected]).  
Original SSLeay License  
E x h i b i t D  
• This product includes software developed by the OpenSSL project.  
• Reverse engineering, disassembling, decompiling, dismantling, or otherwise attempting to analyze or modify the software included in this  
product is prohibited.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specification  
Power requirement  
Analog audio output  
32.0W  
2.0V (rms), 2.2kΩ or below, pin jack  
(L, R) x 1 system  
Power supply  
120V AC 60Hz  
Digital audio output (BITSTREAM/PCM jack)  
Optical connector x 1 system  
Mass  
3.3kg  
LAN port  
100BASE-TX/10BASE-T x 1  
External dimension  
Width 430 x Height 59.5 x Depth 327mm  
Extension port  
1 system  
Signal system  
Standard NTSC Color TV system  
HDMI output  
19 pin, Type A connector  
Laser  
Semiconductor laser  
Wavelength: 405nm/650nm/780nm  
Remote control  
Wireless remote control (SE-R0285)  
VIDEO output  
1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system  
Operating conditions  
Temperature: 41°F ~ 95°F (5°C ~ 35°C)  
Position: Horizontal  
Component output (Y, PB, PR)  
Y output (green), 1.0Vp-p (75Ω),  
Pin jack x 1 system  
PB, PR output (blue, red), 0.7Vp-p (75Ω),  
Pin jack x 1 system each  
Clock accuracy  
Quartz (monthly deviation: approximately 30 seconds)  
• Designs and specifications cations are subject to change without notice.  
• This model may not be compatible with features and/or specifications that may be added in the future.  
• The illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly  
different from the actual unit.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States Warranty  
Digital Audio Video (“DAV”) Product-Depot Repair Warranty  
Toshiba America Consumer Products, L.L.C,. ( “TACP”) makes the following limited warranties to original consumers in the  
United States.  
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING  
THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER  
OR TRANSFEREE.  
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,  
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.  
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,  
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.  
Limited Ninety (90) Day Warranty on Labor*  
Your Responsibility  
TACP warrants this DAV Product and its parts against  
defects in materials or workmanship for a period of ninety  
(90) days after the date of original retail purchase. DURING  
THIS PERIOD, TACP WILL, AT TACP’s OPTION, REPAIR  
OR REPLACE A DEFECTIVE PART WITH A NEW OR  
REFURBISHED PART WITHOUT CHARGE TO YOU FOR  
PARTS OR LABOR.  
THE ABOVE WARRANTIES ARE SUBJECT TO THE  
FOLLOWING CONDITIONS:  
(1) You must retain your bill of sale or provide other proof  
of purchase.  
(2) All warranty servicing of this DAV Product must be  
made by the Depot Warranty Repair Center specified  
by the TACP Consumer Solutions Center.  
Limited One (1) Year Warranty on Parts*  
(3) The warranties from TACP are effective only if the DAV  
Product is purchased and operated in the United States  
or Puerto Rico.  
TACP further warrants the parts in this DAV Product against  
defects in materials or workmanship for a period of one  
(1) year after the date of original retail purchase. DURING  
THIS PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR  
OR REPLACE A DEFECTIVE PART WITH A NEW OR  
REFURBISHED PART WITHOUT CHARGE TO YOU FOR  
THE PART, PROVIDED THAT IF A DEFECTIVE PART IS  
REPAIRED OR REPLACED AFTER NINETY (90) DAYS  
AFTER THE DATE OF ORIGINAL RETAIL PURCHASE,  
THE CONSUMER SHALL PAY ALL LABOR CHARGES  
INVOLVED IN THE REPAIR OR REPLACEMENT THEREOF.  
(4) Labor service charges for set installation, setup,  
adjustment of customer controls and installation or  
repair of antenna systems are not covered by this  
warranty. Reception problems caused by inadequate  
antenna systems are your responsibility.  
(5) Warranties extend only to defects in materials or  
workmanship as limited above and do not extend to any  
DAV Product or parts that have been lost or discarded  
by you or to damage to the DAV Product or parts  
caused by fires, misuse, accident, Acts of God (such  
as lightning or fluctuations in electric power), improper  
installation, improper maintenance or use in violation  
of instructions furnished by TACP; use or malfunction  
through simultaneous use of this DAV Product and  
connected equipment; or to units that have been  
modified or had the serial number removed, altered,  
defaced, or rendered illegible.  
*Rental Units  
The warranty for DAV Product rental units begins on the date  
of the first rental or thirty (30) days after the date of shipment to  
the rental firm, whichever comes first.  
*Commercial Units  
DAV Products sold and used for commercial purposes have a  
limited warranty for all parts and labor, which warranty begins  
on the date of original retail purchase and ends on the date that  
is ninety (90) days thereafter.  
Owner’s Manual and Product Registration Card  
Read this owner’s manual thoroughly before operating this DAV  
Product.  
Complete and mail the enclosed product registration card or  
register your DAV Product on-line at  
registering your DAV Product you will enable TACP to bring  
you new products specifically designed to meet your needs  
and help us to contact you in the unlikely event a safety  
notification is required under the U.S. Consumer Product  
Safety Act. Failure to complete and return the product  
registration card does not diminish your warranty rights.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Obtain Warranty Services  
If, after following all of the operating instructions in this  
manual and checking the section “Before calling service  
personnel”, you find that service is needed:  
(1) For instructions on how to obtain warranty service for  
your DAV Product, contact TACP’s Consumer Solution  
Center toll-free at 1-800-319-6684.  
(2) You must include a copy or original bill of sale or  
other proof of purchase along with the entire DAV  
Product to the Depot Warranty Repair Center  
specified by the TACP Consumer Solutions Center.  
You are responsible for all inbound transportation  
and insurance charges for the DAV Product to the  
Depot Warranty Repair Center specified by the TACP  
Consumer Solutions Center.  
For additional information, visit TACP’s web site:  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY  
STATE OF THE U.S.A., INCLUDING THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE  
EXPRESSLY LIMITED TO THE DURATION OF THE  
LIMITED WARRANTIES SET FORTH ABOVE. WITH  
THE EXCEPTION OF ANY WARRANTIES IMPLIED  
BY THE LAW OF ANY STATE OF THE U.S.A. AS  
HEREBY LIMITED, THE FOREGOING WARRANTY IS  
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,  
GUARANTEES, AGREEMENTS, AND SIMILAR  
OBLIGATIONS OF TACP WITH RESPECT TO THE  
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO  
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL  
OR INCIDENTAL DAMAGES (INCLUDING, BUT  
NOT LIMITED TO, LOST PROFITS, BUSINESS  
INTERRUPTION, OR MODIFICATION OR ERASURE  
OF RECORDED DATA CAUSED BY USE, MISUSE OR  
INABILITY TO USE THIS DAV PRODUCT).  
No person, agent, distributor, dealer or company is  
authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within which  
an action must be commenced to enforce any obligation of  
TACP arising under the warranty or under any statute or law  
of the United States or any state thereof is hereby limited to  
ninety (90) days from the date you discover, or should have  
discovered, the defect. This limitation does not apply to  
implied warranties arising under state law.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH MAY VARY FROM STATE TO STATE IN THE  
U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY  
LASTS, WHEN AN ACTION MAY BE BROUGHT, OR  
THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH  
CIRCUMSTANCES.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Canadian Warranty  
For Toshiba Brand HD DVD Players  
Toshiba of Canada Limited (“TCL”) makes the following limited warranties to original consumers in Canada. THESE LIMITED  
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS TOSHIBA BRAND HD  
DVD Player (the “PLAYER(S)” or “Player(s)”) AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER  
PURCHASER OR TRANSFEREE.  
PLAYERS PURCHASED IN CANADA, AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING, WITHOUT LIMITATION, THE  
UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.  
PLAYERS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITATION, THE UNITED STATES AND  
MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE WARRANTIES.  
Limited One (1) Year Warranty on Parts and Labour (home/  
non-commercial use)  
a. Service, repairs or replacement made necessary by  
accident, misuse, abuse, moisture, liquids, dust, dirt,  
neglect, accident, damage, 24/7 applications, improper  
installation, improper operation, improper cleaning,  
improper maintenance, normal wear and tear, or any other  
external cause or event, act or omission outside the control  
of TCL, including fire, theft, acts of God, alteration, power  
failures, power surges or power shortages, lightning, other  
electrical faults, or repairs, modifications or replacements  
by persons other than those authorized by TCL to service  
the Player;  
b. Replacement of missing, discarded or lost parts, the  
provision of retrofits, or preventive maintenance;  
c. Repair of damage that is cosmetic only or does not affect  
the Player functionality, such as wear and tear, scratches  
and dents;  
Subject to the more limited warranty if the Player is used for any  
commercial or business purposes as set out below, TCL warrants  
the Player and its parts against material defects in materials or  
workmanship that result in the Player failing for a period of one  
(1) year after the date of original retail purchase. DURING THIS  
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE  
A DEFECTIVE PART WITH A NEW OR REFURBISHED PART,  
WITHOUT CHARGE TO YOU FOR PARTS OR LABOUR.  
THE ENTIRE PLAYER MUST BE SHIPPED PREPAID TO  
THE CLOSEST TOSHIBA FACTORY SERVICE DEPOT IN  
MARKHAM, MONTREAL OR VANCOUVER (a “Toshiba Factory  
Service Depot” or “TOSHIBA FACTORY SERVICE DEPOT”  
). TRANSPORTATION AND INSURANCE CHARGES FOR THE  
PLAYER ARE THE RESPONSIBILITY OF THE OWNER. THE  
REPAIRED PLAYER WILL BE RETURNED PREPAID.  
d. Service on Toshiba-branded accessory items (such  
accessory items may be covered by their own warranty);  
e. Service on third party products or service made necessary  
by use of incompatible third party products;  
f. Service made necessary by the simultaneous use of this  
Player and connected equipment;  
Rental Units  
The warranty for Player rental units begins with the date of first  
rental or thirty (30) days from the date of shipment to the rental  
firm, whichever comes first.  
g. Modifications to the Player not approved in writing by TCL,  
and service made necessary by the use or installation of  
non-Toshiba modifications to the Player;  
h. Service of a Player on which the TOSHIBA label or  
logo, rating label or serial number have been defaced or  
removed;  
i. On-site service and repair of the Player; and  
j. Damage to the Player caused by failure to follow the  
specifications, User manuals or guides as to usage and/or  
storage.  
Limited Warranty for Commercial Units  
TCL warrants Players that are used for any commercial or  
business purposes as follows: all parts are warranted against  
material defects in materials or workmanship that result in the  
Player failing for a period of ninety (90) days after the date of  
original retail purchase. DURING THIS PERIOD, TCL WILL, AT  
TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART  
WITH A NEW OR REFURBISHED PART, WITHOUT CHARGE  
TO YOU FOR PARTS OR LABOUR. THE ENTIRE PLAYER  
MUST BE SHIPPED PREPAID TO THE CLOSEST TOSHIBA  
FACTORY SERVICE DEPOT IN MARKHAM, MONTREAL OR  
VANCOUVER. TRANSPORTATION AND INSURANCE  
CHARGES FOR THE PLAYER ARE THE RESPONSIBILITY OF  
THE OWNER. THE REPAIRED PLAYER WILL BE RETURNED  
PREPAID.  
Disclaimer and Limitation of Remedy  
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER  
EXPRESS AND IMPLIED WARRANTIES, CONDITIONS  
AND REPRESENTATIONS FOR THIS PLAYER, INCLUDING  
THE IMPLIED WARRANTIES AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED.  
IF THE APPLICABLE LAW, STATUTORY OR OTHERWISE,  
PRECLUDES THE EXCLUSION OF ANY IMPLIED  
WARRANTIES, CONDITIONS AND REPRESENTATIONS  
THEN SUCH IMPLIED WARRANTIES, CONDITIONS AND  
REPRESENTATIONS ARE OTHERWISE LIMITED IN  
DURATION TO THE TERM OF THIS EXPRESS WRITTEN  
LIMITED WARRANTY. TO THE EXTENT NOT PRECLUDED  
BY LAW, THIS WRITTEN WARRANTY SUPERCEDES AND  
SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY,  
CONDITION OR REPRESENTATION NOT STATED IN  
THIS WARRANTY, WHETHER MADE BY TCL, TOSHIBA  
CORPORATION, THEIR AFFILIATES, AND ADRs AND  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE  
FOLLOWING CONDITIONS:  
1) You must provide your bill of sale or other proof of purchase.  
2) All warranty servicing of this Player must be performed by a  
Toshiba Factory Service Depot.  
3) The warranties from TCL are effective only if the Player  
is (i) purchased as new and unopened from TCL or  
from TCL’s authorized distributors, dealers or resellers  
(“ADR’s”) and (ii) located/operated in Canada.  
4) Warranties extend only to material defects in materials or  
workmanship as limited above, and do not extend to:  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHETHER MADE ORALLY OR IN WRITING (INCLUDING  
ANY STATEMENT IN ANY BROCHURE, PRESS RELEASE,  
ANNOUNCEMENT, ADVERTISEMENT, POINT OF SALE  
DISPLAY, ETC.).  
General Provisions  
If and to the extent that any provision of this limited warranty  
should generally be found to be unenforceable, the unenforceable  
provision shall be severed from the warranty and deemed not to  
form part of the warranty. The remaining provisions of this warranty  
shall be and remain valid and enforceable. If and to the extent  
that any provision of this limited warranty as it relates to any of the  
Related Parties is found to be invalid or unenforceable in respect  
of that party (the “Excluded Party”), the Excluded Party shall be  
deemed to be severed or excluded from the provision, and the  
provision shall remain valid, enforceable and applicable in respect  
of the other or remaining Related Parties.  
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE  
INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR  
MANUALS. IF YOU FAIL TO DO SO, THIS PLAYER MAY NOT  
FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE.  
THIS WARRANTY WILL NOT COVER ANY SERVICE THAT  
IS REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF  
ANY FAILURE TO FOLLOW THE SET-UP AND USAGE  
INSTRUCTIONS. THIS WARRANTY DOES NOT APPLY AND  
SHALL BE VOID AND UNENFORCEABLE IF THE PLAYER IS  
OPENED, SERVICED, OR REPAIRED BY PERSONS OTHER  
THAN THOSE AUTHORIZED BY TCL TO SERVICE OR REPAIR  
THE PRODUCT.  
To the extent permitted by law, this limited warranty shall be  
governed and construed in accordance with the laws of Ontario.  
If there is any inconsistency between this limited warranty, on the  
one hand, and any statement in the packaging of the Player or in  
any other document enclosed with, or used in the context of the  
promotion or sale of, the Player, on the other hand, the provisions  
of this limited warranty shall prevail.  
IF THE PLAYER FAILS TO WORK AS WARRANTED ABOVE,  
YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR  
OR REPLACEMENT OF THE DEFECTIVE PART. IN NO EVENT  
WILL TCL, TOSHIBA CORPORATION, THEIR AFFILIATES  
OR ADRs (THE “RELATED PARTIES”) BE LIABLE TO YOU  
OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY,  
REIMBURSEMENT, COSTS OR EXPENSES. THIS LIMITATION  
APPLIES TO DAMAGES, MONEY, REIMBURSEMENT, COSTS  
OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING  
ANY DIRECT OR INDIRECT DAMAGES, DAMAGE TO  
PROPERTY OR PERSON, LOST PROFITS, LOST SAVINGS,  
INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL,  
EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER  
FOR BREACH OF WARRANTY, BREACH OF CONTRACT, TORT  
(INCLUDING NEGLIGENCE), UNDER A STATUTE OR UNDER  
ANY OTHER LAW OR FORM OR ACTION, OR WHETHER  
ARISING OUT OF THE USE OF OR INABILITY TO USE THE  
PLAYER, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF  
ANY CLAIM BY ANY OTHER PARTY.  
How to Obtain Warranty Services  
If, after following all of the operating instructions in this manual and  
checking the “Troubleshooting” section, you find that service is  
needed:  
(1) To find the nearest Toshiba Factory Service Depot, visit TCL’s  
(2) Present your bill of sale or other proof of purchase to  
theToshiba Factory Service Depot.  
For additional information, visit TCL’s website:  
No person, agent, distributor, dealer or company is authorized  
to change, modify or extend the terms of these warranties in any  
manner whatsoever.  
Arbitration and Dispute Resolution  
To the extent not precluded by law, any claim, dispute, controversy  
or disagreement (whether for breach of warranty, breach of  
contract, tort (including negligence), under a statute or under any  
other law or form of action) against any of the Related Parties  
arising out of, or otherwise relating to: (i) this warranty; (ii) the  
Player; (iii) any oral or written representations, statements,  
brochures, press releases, advertising, announcement, point of  
sale display, or promotional material relating to the Player; (iv) the  
relationships that result from this warranty, (the foregoing claims,  
disputes controversies and disagreements are collectively referred  
to as the “Dispute”), shall be referred to and resolved by final and  
binding arbitration (to the exclusion of the courts). To the extent  
not precluded by law, you agree to waive any right that you may  
have to commence or participate in any representative or class  
proceeding against the Related Parties relating to any Dispute.  
If and where applicable and to the extent not precluded by law,  
you further agree to opt out of any such representative or class  
proceedings. Arbitration of any Dispute will be conducted in the  
forum and in the manner as agreed to between you and TCL.  
Failing such agreement, the arbitration will be conducted by one  
arbitrator pursuant to the laws and rules relating to arbitration  
generally in force in the jurisdiction in which you reside at the time  
that the Dispute arises. To the extent not precluded by law, no  
claim, dispute, controversy or disagreement of any other person  
may be joined or combined with any Dispute by you, without the  
prior written consent of TCL.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION ON CUSTOMER SUPPORT  
HD DVD is a new and evolving format, so changes and improvements are possible. To obtain updated information about  
HD DVD and this product, as well as customer support information about this product, please contact Toshiba  
Customer Support:  
©2007 TOSHIBA CORPORATION  
Printed in China  
(
Printed on 70% Recycled Paper  
GX1D00001700  
Download from Www.Somanuals.com. All Manuals Search And Download.  

TDK Network Card DEA Series DEA205375BT 2054A1 User Manual
Tektronix Car Video System 071 1143 01 User Manual
Thermo Products Cooktop OH6FX072DV4 User Manual
Toshiba Computer Drive MK3255GSX User Manual
Toshiba DVD Player SD 3800 User Manual
Toshiba Speaker System MW20F12 User Manual
Victory Refrigeration Freezer UF 448 SSBS User Manual
ViewSonic Digital Photo Frame VFM835 52G User Manual
Vizio Cable Box M601d A3 User Manual
VTech Cordless Telephone ia5865 User Manual